hw/block/nvme: zoned namespace command set
v3 cover hw/block/nvme: zoned namespace command set
From: Klaus Jensen <[email protected]>
Updated version of my proposal.
Based-on: <[email protected]>
Changes for v3
~~~~~~~~~~~~~~
* Rebased on nvme-next with "[PATCH v2] hw/block/nvme: add dulbe support" applied.
* "hw/block/nvme: add support for dulbe and block utilization tracking"
- Dropped from this series. This series instead builds on the support for DULBE that I added in "[PATCH v2] hw/block/nvme: add dulbe support", previously posted.
* "hw/block/nvme: add the zone management send command"
- Use asynchronous discards.
* "hw/block/nvme: add basic read/write for zoned namespaces"
* "hw/block/nvme: add the zone management receive command"
* "hw/block/nvme: add the zone management send command"
* "hw/block/nvme: add the zone append command"
* "hw/block/nvme: track and enforce zone resources"
* "hw/block/nvme: allow open to close zone transitions by controller"
- In compliance with the concensus I dropped zone persistence support from all patches.
Changes for v2
~~~~~~~~~~~~~~
* "hw/block/nvme: add support for dulbe and block utilization tracking"
- Factor out pstate init/load into separate functions.
- Fixed a stupid off-by-1 bug that would trigger when resetting the last zone.
- I added a more formalized pstate file format that includes a header. This is pretty similar to what is done in Dmitry's series, but with fewer fields. The device parameters for nvme-ns are still the "authoritative" ones, so if any parameters that influence LBA size, number of zones, etc. do not match, an error indicating the discrepancy will be produced. IIRC, Dmitry's version does the same.
It is set up such that newer versions can load pstate files from older versions. The file format header is not unlike a standard nvme datastructure with reserved areas. This means that when adding new command sets that require persistent state, it is not needed to bump the version number, unless the header has to change dramatically. This is demonstrated when the zoned namespace command set support is added in "hw/block/nvme: add basic read/write for zoned namespaces".
* "hw/block/nvme: add basic read/write for zoned namespaces"
- The device will now transition all opened zones to Closed on "normal shutdown". You can force the "transition to Full" behavior by killing QEMU from the monitor.
* "hw/block/nvme: add the zone append command"
- Slightly reordered the logic so a LBA Out of Range error is returned before Invalid Field in Command for normal read/write commands.
* "hw/block/nvme: support zone active excursions"
- Dropped. Optional and non-critical.
* "hw/block/nvme: support reset/finish recommended limits"
- Dropped. Optional and non-critical.
Gollu Appalanaidu (1):
hw/block/nvme: add commands supported and effects log page
Klaus Jensen (8):
hw/block/nvme: add uuid namespace parameter hw/block/nvme: support namespace types
hw/block/nvme: add basic read/write for zoned namespaces hw/block/nvme: add the zone management receive command hw/block/nvme: add the zone management send command hw/block/nvme: add the zone append command hw/block/nvme: track and enforce zone resources hw/block/nvme: allow open to close zone transitions by controller
docs/specs/nvme.txt | 17 + hw/block/nvme-ns.h | 112 +++- hw/block/nvme.h | 23 + include/block/nvme.h | 216 ++++++- block/nvme.c | 4 +- hw/block/nvme-ns.c | 172 +++++- hw/block/nvme.c | 1284 +++++++++++++++++++++++++++++++++++++++-- hw/block/trace-events | 27 +- 8 files changed, 1791 insertions(+), 64 deletions(-)
Signature · 1 line
2.28.0
PATCH v3 1/9 hw/block/nvme: add commands supported and effects log page
From: Gollu Appalanaidu <[email protected]>
This is to support for the Commands Supported and Effects log page. See NVM Express Spec 1.3d, sec. 5.14.1.5 ("Commands Supported and Effects")
--- include/block/nvme.h | 25 +++++++++++++-- hw/block/nvme.c | 74 +++++++++++++++++++++++++++++++++++++++++++- 2 files changed, 96 insertions(+), 3 deletions(-)
include/block/nvme.h +23 -2
@@ -737,6 +737,24 @@ typedef struct QEMU_PACKED NvmeSmartLog {uint8_t reserved2[320 ]; } NvmeSmartLog; +typedef struct QEMU_PACKED NvmeEffectsLog { +uint32_t acs[256 ]; +uint32_t iocs[256 ]; +uint8_t rsvd2048[2048 ]; +} NvmeEffectsLog; + +enum { +NVME_EFFECTS_CSUPP =1 <<0 , +NVME_EFFECTS_LBCC =1 <<1 , +NVME_EFFECTS_NCC =1 <<2 , +NVME_EFFECTS_NIC =1 <<3 , +NVME_EFFECTS_CCC =1 <<4 , +NVME_EFFECTS_CSE_SINGLE =1 <<16 , +NVME_EFFECTS_CSE_MULTI =1 <<17 , +NVME_EFFECTS_CSE_MASK =3 <<16 , +NVME_EFFECTS_UUID_SEL =1 <<19 , +}; +enum NvmeSmartWarn {NVME_SMART_SPARE =1 <<0 ,NVME_SMART_TEMPERATURE =1 <<1 ,
@@ -749,6 +767,7 @@ enum NvmeLogIdentifier {NVME_LOG_ERROR_INFO =0x01 ,NVME_LOG_SMART_INFO =0x02 ,NVME_LOG_FW_SLOT_INFO =0x03 , + NVME_LOG_EFFECTS = 0x05, }; typedef struct QEMU_PACKED NvmePSD {
@@ -860,8 +879,9 @@ enum NvmeIdCtrlFrmw { };enum NvmeIdCtrlLpa { -NVME_LPA_NS_SMART =1 <<0 , -NVME_LPA_EXTENDED =1 <<2 , +NVME_LPA_NS_SMART =1 <<0 , +NVME_LPA_EFFECTS_LOG =1 <<1 , +NVME_LPA_EXTENDED =1 <<2 , };#define NVME_CTRL_SQES_MIN (sqes) ((sqes) & 0xf)
@@ -1068,5 +1088,6 @@ static inline void _nvme_check_size(void)QEMU_BUILD_BUG_ON (sizeof (NvmeIdNs) !=4096 );QEMU_BUILD_BUG_ON (sizeof (NvmeSglDescriptor) !=16 );QEMU_BUILD_BUG_ON (sizeof (NvmeIdNsDescr) !=4 ); + QEMU_BUILD_BUG_ON(sizeof(NvmeEffectsLog) != 4096); }#endif
hw/block/nvme.c +73 -1
98 lines not on this page · raw message
Signature · 1 line
2.28.0
PATCH v3 2/9 hw/block/nvme: add uuid namespace parameter
In reply to Klaus JensenFrom: Klaus Jensen <[email protected]>
Add the 'uuid' nvme-ns device parameter such that users who requires a persistent namespace UUID can explicitly specify it.
If not specified, the property will autogenerate an UUID for each QEMU invocation.
--- hw/block/nvme-ns.h | 1 + hw/block/nvme-ns.c | 1 + hw/block/nvme.c | 12 ++++-------- 3 files changed, 6 insertions(+), 8 deletions(-)
hw/block/nvme-ns.h +1 -0
@@ -21,6 +21,7 @@typedef struct NvmeNamespaceParams {uint32_t nsid; +QemuUUID uuid; }NvmeNamespaceParams ; typedef struct NvmeNamespace {
hw/block/nvme-ns.c +1 -0
@@ -130,6 +130,7 @@ static void nvme_ns_realize(DeviceState *dev, Error **errp)static Property nvme_ns_props[] = {DEFINE_BLOCK_PROPERTIES (NvmeNamespace, blkconf),DEFINE_PROP_UINT32 ("nsid" , NvmeNamespace, params.nsid,0 ), +DEFINE_PROP_UUID ("uuid" , NvmeNamespace, params.uuid),DEFINE_PROP_END_OF_LIST (), };
hw/block/nvme.c +4 -8
@@ -1632,6 +1632,7 @@ static uint16_t nvme_identify_ns_descr_list(NvmeCtrl *n, NvmeRequest *req)NvmeIdentify *c = (NvmeIdentify *)&req->cmd;uint32_t nsid =le32_to_cpu (c->nsid);uint8_t list[NVME_IDENTIFY_DATA_SIZE ]; +NvmeNamespace *ns; struct data { struct {
@@ -1648,21 +1649,16 @@ static uint16_t nvme_identify_ns_descr_list(NvmeCtrl *n, NvmeRequest *req)return NVME_INVALID_NSID |NVME_DNR ; } -if (unlikely (!nvme_ns (n, nsid))) { + ns =nvme_ns (n, nsid); +if (unlikely (!ns)) {return NVME_INVALID_FIELD |NVME_DNR ; }memset (list,0x0 ,sizeof (list)); -/* -* Because the NGUID and EUI64 fields are 0 in the Identify Namespace data -* structure, a Namespace UUID (nidt = 0x3) must be reported in the -* Namespace Identification Descriptor. Add a very basic Namespace UUID -* here. -*/ ns_descrs->uuid.hdr.nidt =NVME_NIDT_UUID ; ns_descrs->uuid.hdr.nidl =NVME_NIDT_UUID_LEN ; -stl_be_p (&ns_descrs->uuid.v, nsid); +memcpy (ns_descrs->uuid.v, ns->params.uuid.data,16 );return nvme_dma (n, list,NVME_IDENTIFY_DATA_SIZE ,DMA_DIRECTION_FROM_DEVICE , req);
Signature · 1 line
2.28.0
PATCH v3 3/9 hw/block/nvme: support namespace types
In reply to Klaus JensenFrom: Klaus Jensen <[email protected]>
Implement support for TP 4056 ("Namespace Types"). This adds the 'iocs' (I/O Command Set) device parameter to the nvme-ns device.
--- docs/specs/nvme.txt | 3 + hw/block/nvme-ns.h | 11 ++- hw/block/nvme.h | 3 + include/block/nvme.h | 52 +++++++--- block/nvme.c | 4 +- hw/block/nvme-ns.c | 21 +++- hw/block/nvme.c | 225 +++++++++++++++++++++++++++++++++++------- hw/block/trace-events | 6 +- 8 files changed, 267 insertions(+), 58 deletions(-)
docs/specs/nvme.txt +3 -0
@@ -3,6 +3,9 @@ NVM Express Controller The nvme device (-device nvme) emulates an NVM Express Controller. + `iocs`; The "I/O Command Set" associated with the namespace. E.g. 0x0 for the + NVM Command Set (the default), or 0x2 for the Zoned Namespace Command Set. + Reference Specifications ------------------------
hw/block/nvme-ns.h +9 -2
@@ -21,6 +21,7 @@typedef struct NvmeNamespaceParams {uint32_t nsid; +uint8_t iocs;QemuUUID uuid; }NvmeNamespaceParams ;
@@ -29,7 +30,8 @@ typedef struct NvmeNamespace {BlockConf blkconf;int32_t bootindex;int64_t size; -NvmeIdNs id_ns; +uint8_t iocs; +void *id_ns[NVME_IOCS_MAX ];NvmeNamespaceParams params;
@@ -47,9 +49,14 @@ static inline uint32_t nvme_nsid(NvmeNamespace *ns)return -1 ; } +static inline NvmeIdNsNvm *nvme_ns_id_nvm (NvmeNamespace *ns) +{ +return ns->id_ns[NVME_IOCS_NVM ]; +} +static inline NvmeLBAF *nvme_ns_lbaf (NvmeNamespace *ns) { -NvmeIdNs *id_ns = &ns->id_ns; +NvmeIdNsNvm *id_ns =nvme_ns_id_nvm (ns);return &id_ns->lbaf[NVME_ID_NS_FLBAS_INDEX (id_ns->flbas)]; }
hw/block/nvme.h +3 -0
@@ -112,6 +112,7 @@ typedef struct NvmeFeatureVal { };uint32_t async_config;uint32_t vwc; +uint32_t iocsci; } NvmeFeatureVal; typedef struct NvmeCtrl {
@@ -139,6 +140,7 @@ typedef struct NvmeCtrl {uint64_t timestamp_set_qemu_clock_ms;/* QEMU clock time */ uint64_t starttime_ms;uint16_t temperature; +uint64_t iocscs[512 ];HostMemoryBackend *pmrdev;
@@ -154,6 +156,7 @@ typedef struct NvmeCtrl {NvmeSQueue admin_sq;NvmeCQueue admin_cq;NvmeIdCtrl id_ctrl; +void *id_ctrl_iocss[NVME_IOCS_MAX ];NvmeFeatureVal features; } NvmeCtrl;
include/block/nvme.h +41 -11
130 lines not on this page · raw message
block/nvme.c +2 -2
@@ -331,7 +331,7 @@ static inline int nvme_translate_error(const NvmeCqe *c) {uint16_t status = (le16_to_cpu (c->status) >>1 ) &0xFF ;if (status) { - trace_nvme_error(le32_to_cpu(c->result), + trace_nvme_error(le32_to_cpu(c->dw0), le16_to_cpu(c->sq_head), le16_to_cpu(c->sq_id), le16_to_cpu(c->cid),
@@ -498,7 +498,7 @@ static void nvme_identify(BlockDriverState *bs, int namespace, Error **errp)BDRVNVMeState *s = bs->opaque;union {NvmeIdCtrl ctrl; -NvmeIdNs ns; +NvmeIdNsNvm ns; } *id;NvmeLBAF *lbaf;uint16_t oncs;
hw/block/nvme-ns.c +18 -3
@@ -30,11 +30,17 @@static void nvme_ns_init (NvmeNamespace *ns) { -NvmeIdNs *id_ns = &ns->id_ns; -int lba_index =NVME_ID_NS_FLBAS_INDEX (ns->id_ns.flbas); +NvmeIdNsNvm *id_ns; +int lba_index; + + ns->id_ns[NVME_IOCS_NVM ] =g_new0 (NvmeIdNsNvm,1 ); + id_ns =nvme_ns_id_nvm (ns); + + ns->iocs = ns->params.iocs; + lba_index =NVME_ID_NS_FLBAS_INDEX (id_ns->flbas);if (blk_get_flags (ns->blkconf.blk) &BDRV_O_UNMAP ) { - ns->id_ns.dlfeat =0x9 ; + id_ns->dlfeat =0x9 ; } id_ns->lbaf[lba_index].ds =31 -clz32 (ns->blkconf.logical_block_size);
@@ -81,6 +87,14 @@ static int nvme_ns_check_constraints(NvmeNamespace *ns, Error **errp)return -1 ; } +switch (ns->params.iocs) { +case NVME_IOCS_NVM : +break ; +default : +error_setg (errp,"unsupported iocs" ); +return -1 ; + } +return 0 ; }
@@ -130,6 +144,7 @@ static void nvme_ns_realize(DeviceState *dev, Error **errp)static Property nvme_ns_props[] = {DEFINE_BLOCK_PROPERTIES (NvmeNamespace, blkconf),DEFINE_PROP_UINT32 ("nsid" , NvmeNamespace, params.nsid,0 ), +DEFINE_PROP_UINT8 ("iocs" , NvmeNamespace, params.iocs,NVME_IOCS_NVM ),DEFINE_PROP_UUID ("uuid" , NvmeNamespace, params.uuid),DEFINE_PROP_END_OF_LIST (), };
hw/block/nvme.c +187 -38
461 lines not on this page · raw message
hw/block/trace-events +4 -2
@@ -47,10 +47,12 @@ pci_nvme_create_sq(uint64_t addr, uint16_t sqid, uint16_t cqid, uint16_t qsize, pci_nvme_create_cq(uint64_t addr, uint16_t cqid, uint16_t vector, uint16_t size, uint16_t qflags, int ien) "create completion queue, addr=0x%"PRIx64", cqid=%"PRIu16", vector=%"PRIu16", qsize=%"PRIu16", qflags=%"PRIu16", ien=%d" pci_nvme_del_sq(uint16_t qid) "deleting submission queue sqid=%"PRIu16"" pci_nvme_del_cq(uint16_t cqid) "deleted completion queue, cqid=%"PRIu16"" +pci_nvme_identify(uint16_t cid, uint32_t nsid, uint16_t cntid, uint8_t cns, uint8_t csi, uint16_t nvmsetid) "cid %"PRIu16" nsid %"PRIu32" cntid 0x%"PRIx16" cns 0x%"PRIx8" csi 0x%"PRIx8" nvmsetid %"PRIu16"" pci_nvme_identify_ctrl(void) "identify controller" -pci_nvme_identify_ns(uint32_t ns) "nsid %"PRIu32"" -pci_nvme_identify_nslist(uint32_t ns) "nsid %"PRIu32"" +pci_nvme_identify_ns(uint32_t ns, uint8_t csi) "nsid %"PRIu32" csi 0x%"PRIx8"" +pci_nvme_identify_nslist(uint32_t ns, uint8_t csi) "nsid %"PRIu32" csi 0x%"PRIx8"" pci_nvme_identify_ns_descr_list(uint32_t ns) "nsid %"PRIu32"" +pci_nvme_identify_io_cmd_set(uint16_t cid) "cid %"PRIu16"" pci_nvme_get_log(uint16_t cid, uint8_t lid, uint8_t lsp, uint8_t rae, uint32_t len, uint64_t off) "cid %"PRIu16" lid 0x%"PRIx8" lsp 0x%"PRIx8" rae 0x%"PRIx8" len %"PRIu32" off %"PRIu64"" pci_nvme_getfeat(uint16_t cid, uint32_t nsid, uint8_t fid, uint8_t sel, uint32_t cdw11) "cid %"PRIu16" nsid 0x%"PRIx32" fid 0x%"PRIx8" sel 0x%"PRIx8" cdw11 0x%"PRIx32"" pci_nvme_setfeat(uint16_t cid, uint32_t nsid, uint8_t fid, uint8_t save, uint32_t cdw11) "cid %"PRIu16" nsid 0x%"PRIx32" fid 0x%"PRIx8" save 0x%"PRIx8" cdw11 0x%"PRIx32""
Signature · 1 line
2.28.0
PATCH v3 4/9 hw/block/nvme: add basic read/write for zoned namespaces
In reply to Klaus JensenFrom: Klaus Jensen <[email protected]>
This adds basic read and write for zoned namespaces.
A zoned namespace is created by setting the iocs namespace parameter to 0x2 and specifying the zns.zcap parameter (zone capacity) in number of logical blocks per zone. If a zone size (zns.zsze) is not specified, the namespace device will set the zone size to be the next power of two and fit in as many zones as possible on the underlying namespace blockdev. This behavior is not required by the specification, but ensures that the device can be initialized by the Linux kernel nvme driver, which requires a power of two zone size.
--- docs/specs/nvme.txt | 8 ++ hw/block/nvme-ns.h | 80 +++++++++++ hw/block/nvme.h | 11 ++ include/block/nvme.h | 60 +++++++- hw/block/nvme-ns.c | 116 ++++++++++++++++ hw/block/nvme.c | 308 +++++++++++++++++++++++++++++++++++++++++- hw/block/trace-events | 7 + 7 files changed, 585 insertions(+), 5 deletions(-)
docs/specs/nvme.txt +8 -0
@@ -6,6 +6,14 @@ The nvme device (-device nvme) emulates an NVM Express Controller. `iocs`; The "I/O Command Set" associated with the namespace. E.g. 0x0 for the NVM Command Set (the default), or 0x2 for the Zoned Namespace Command Set. + `zns.zcap`; If `iocs` is 0x2, this specifies the zone capacity. It is + specified in units of logical blocks. + + `zns.zsze`; If `iocs` is 0x2, this specifies the zone size. It is specified + in units of the logical blocks. If not specified, the value depends on + zns.zcap; if the zone capacity is a power of two, the zone size will be + set to that, otherwise it will default to the next power of two. + Reference Specifications ------------------------
hw/block/nvme-ns.h +80 -0
123 lines not on this page · raw message
hw/block/nvme.h +11 -0
@@ -36,6 +36,17 @@ typedef struct NvmeRequest {QTAILQ_ENTRY (NvmeRequest)entry; } NvmeRequest; +static inline bool nvme_req_is_write (NvmeRequest *req) +{ +switch (req->cmd.opcode) { +case NVME_CMD_WRITE : +case NVME_CMD_WRITE_ZEROES : +return true; +default : +return false; + } +} +static inline const char *nvme_adm_opc_str (uint8_t opc) {switch (opc) {
include/block/nvme.h +57 -3
100 lines not on this page · raw message
hw/block/nvme-ns.c +116 -0
152 lines not on this page · raw message
hw/block/nvme.c +306 -2
386 lines not on this page · raw message
hw/block/trace-events +7 -0
@@ -71,6 +71,7 @@ pci_nvme_enqueue_event_noqueue(int queued) "queued %d" pci_nvme_enqueue_event_masked(uint8_t typ) "type 0x%"PRIx8"" pci_nvme_no_outstanding_aers(void) "ignoring event; no outstanding AERs" pci_nvme_enqueue_req_completion(uint16_t cid, uint16_t cqid, uint16_t status) "cid %"PRIu16" cqid %"PRIu16" status 0x%"PRIx16"" +pci_nvme_zrm_transition(uint32_t nsid, uint64_t zslba, uint8_t from, uint8_t to) "nsid %"PRIu32" zslba 0x%"PRIx64" from 0x%"PRIx8" to 0x%"PRIx8"" pci_nvme_mmio_read(uint64_t addr) "addr 0x%"PRIx64"" pci_nvme_mmio_write(uint64_t addr, uint64_t data) "addr 0x%"PRIx64" data 0x%"PRIx64"" pci_nvme_mmio_doorbell_cq(uint16_t cqid, uint16_t new_head) "cqid %"PRIu16" new_head %"PRIu16""
@@ -95,6 +96,10 @@ pci_nvme_err_addr_read(uint64_t addr) "addr 0x%"PRIx64"" pci_nvme_err_addr_write(uint64_t addr) "addr 0x%"PRIx64"" pci_nvme_err_cfs(void) "controller fatal status" pci_nvme_err_aio(uint16_t cid, const char *errname, uint16_t status) "cid %"PRIu16" err '%s' status 0x%"PRIx16"" +pci_nvme_err_zone_is_full(uint16_t cid, uint64_t slba) "cid %"PRIu16" lba 0x%"PRIx64"" +pci_nvme_err_zone_is_read_only(uint16_t cid, uint64_t slba) "cid %"PRIu16" lba 0x%"PRIx64"" +pci_nvme_err_zone_invalid_write(uint16_t cid, uint64_t slba, uint64_t wp) "cid %"PRIu16" lba 0x%"PRIx64" wp 0x%"PRIx64"" +pci_nvme_err_zone_boundary(uint16_t cid, uint64_t slba, uint32_t nlb, uint64_t zcap) "cid %"PRIu16" lba 0x%"PRIx64" nlb %"PRIu32" zcap 0x%"PRIx64"" pci_nvme_err_invalid_sgld(uint16_t cid, uint8_t typ) "cid %"PRIu16" type 0x%"PRIx8"" pci_nvme_err_invalid_num_sgld(uint16_t cid, uint8_t typ) "cid %"PRIu16" type 0x%"PRIx8"" pci_nvme_err_invalid_sgl_excess_length(uint16_t cid) "cid %"PRIu16""
@@ -123,6 +128,8 @@ pci_nvme_err_invalid_identify_cns(uint16_t cns) "identify, invalid cns=0x%"PRIx1 pci_nvme_err_invalid_getfeat(int dw10) "invalid get features, dw10=0x%"PRIx32"" pci_nvme_err_invalid_setfeat(uint32_t dw10) "invalid set features, dw10=0x%"PRIx32"" pci_nvme_err_invalid_log_page(uint16_t cid, uint16_t lid) "cid %"PRIu16" lid 0x%"PRIx16"" +pci_nvme_err_invalid_zone(uint16_t cid, uint64_t lba) "cid %"PRIu16" lba 0x%"PRIx64"" +pci_nvme_err_invalid_zone_condition(uint16_t cid, uint64_t zslba, uint8_t condition) "cid %"PRIu16" zslba 0x%"PRIx64" condition 0x%"PRIx8"" pci_nvme_err_startfail_cq(void) "nvme_start_ctrl failed because there are non-admin completion queues" pci_nvme_err_startfail_sq(void) "nvme_start_ctrl failed because there are non-admin submission queues" pci_nvme_err_startfail_nbarasq(void) "nvme_start_ctrl failed because the admin submission queue address is null"
Signature · 1 line
2.28.0
PATCH v3 5/9 hw/block/nvme: add the zone management receive command
In reply to Klaus JensenFrom: Klaus Jensen <[email protected]>
Add the Zone Management Receive command.
--- hw/block/nvme-ns.h | 8 +++ hw/block/nvme.h | 1 + include/block/nvme.h | 46 +++++++++++++ hw/block/nvme-ns.c | 12 +++- hw/block/nvme.c | 146 ++++++++++++++++++++++++++++++++++++++++++ hw/block/trace-events | 1 + 6 files changed, 213 insertions(+), 1 deletion(-)
hw/block/nvme-ns.h +8 -0
@@ -27,11 +27,13 @@ typedef struct NvmeNamespaceParams {struct {uint64_t zcap;uint64_t zsze; +uint8_t zdes; } zns; } NvmeNamespaceParams;typedef struct NvmeZone {NvmeZoneDescriptor *zd; +uint8_t *zde;uint64_t wp_staging; }NvmeZone ;
@@ -55,6 +57,7 @@ typedef struct NvmeNamespace {NvmeZone *zones;NvmeZoneDescriptor *zd; +uint8_t *zde; } zns; } NvmeNamespace;
@@ -105,6 +108,11 @@ static inline uint64_t nvme_ns_zsze(NvmeNamespace *ns)return nvme_ns_lbafe (ns)->zsze; } +static inline size_t nvme_ns_zdes_bytes (NvmeNamespace *ns) +{ +return ns->params.zns.zdes <<6 ; +} +/* calculate the number of LBAs that the namespace can accomodate */ static inline uint64_t nvme_ns_nlbas (NvmeNamespace *ns) {
hw/block/nvme.h +1 -0
@@ -71,6 +71,7 @@ static inline const char *nvme_io_opc_str(uint8_t opc)case NVME_CMD_WRITE :return "NVME_NVM_CMD_WRITE" ;case NVME_CMD_READ :return "NVME_NVM_CMD_READ" ;case NVME_CMD_WRITE_ZEROES :return "NVME_NVM_CMD_WRITE_ZEROES" ; +case NVME_CMD_ZONE_MGMT_RECV :return "NVME_ZONED_CMD_ZONE_MGMT_RECV" ;default :return "NVME_NVM_CMD_UNKNOWN" ; } }
include/block/nvme.h +46 -0
70 lines not on this page · raw message
hw/block/nvme-ns.c +11 -1
@@ -59,6 +59,9 @@ static void nvme_ns_zns_init_zones(NvmeNamespace *ns) zone = &ns->zns.zones[i]; zone->zd = &ns->zns.zd[i]; +if (ns->params.zns.zdes) { + zone->zde = &ns->zns.zde[i]; + } zone->wp_staging = zslba; zd = zone->zd;
@@ -79,11 +82,15 @@ static void nvme_ns_init_zoned(NvmeNamespace *ns) id_ns_zns->lbafe[i].zsze = ns->params.zns.zsze ?cpu_to_le64 (ns->params.zns.zsze) :cpu_to_le64 (pow2ceil (ns->params.zns.zcap)); + id_ns_zns->lbafe[i].zdes = ns->params.zns.zdes; } ns->zns.num_zones =nvme_ns_nlbas (ns) /nvme_ns_zsze (ns); ns->zns.zones =g_malloc0_n (ns->zns.num_zones,sizeof (NvmeZone)); ns->zns.zd =g_malloc0_n (ns->zns.num_zones,sizeof (NvmeZoneDescriptor)); +if (ns->params.zns.zdes) { + ns->zns.zde =g_malloc0_n (ns->zns.num_zones,nvme_ns_zdes_bytes (ns)); + } id_ns_zns->mar =0xffffffff ; id_ns_zns->mor =0xffffffff ;
@@ -126,6 +133,7 @@ void nvme_ns_zns_init_zone_state(NvmeNamespace *ns)for (int i =0 ; i < ns->zns.num_zones; i++) {NvmeZone *zone = &ns->zns.zones[i]; zone->zd = &ns->zns.zd[i]; + zone->zde = &ns->zns.zde[i]; zone->wp_staging =nvme_wp (zone);
@@ -137,7 +145,8 @@ void nvme_ns_zns_init_zone_state(NvmeNamespace *ns)break ;case NVME_ZS_ZSC : -if (nvme_wp (zone) ==nvme_zslba (zone)) { +if (nvme_wp (zone) ==nvme_zslba (zone) && + !(zone->zd->za &NVME_ZA_ZDEV )) {nvme_zs_set (zone,NVME_ZS_ZSE ); }
@@ -262,6 +271,7 @@ static Property nvme_ns_props[] = {DEFINE_PROP_UUID ("uuid" , NvmeNamespace, params.uuid),DEFINE_PROP_UINT64 ("zns.zcap" , NvmeNamespace, params.zns.zcap,0 ),DEFINE_PROP_UINT64 ("zns.zsze" , NvmeNamespace, params.zns.zsze,0 ), +DEFINE_PROP_UINT8 ("zns.zdes" , NvmeNamespace, params.zns.zdes,0 ), DEFINE_PROP_END_OF_LIST(), };
hw/block/nvme.c +146 -0
194 lines not on this page · raw message
hw/block/trace-events +1 -0
@@ -43,6 +43,7 @@ pci_nvme_admin_cmd(uint16_t cid, uint16_t sqid, uint8_t opcode, const char *opna pci_nvme_rw(uint16_t cid, const char *verb, uint32_t nsid, uint32_t nlb, uint64_t count, uint64_t lba) "cid %"PRIu16" opname '%s' nsid %"PRIu32" nlb %"PRIu32" count %"PRIu64" lba 0x%"PRIx64"" pci_nvme_rw_cb(uint16_t cid, const char *blkname) "cid %"PRIu16" blk '%s'" pci_nvme_write_zeroes(uint16_t cid, uint32_t nsid, uint64_t slba, uint32_t nlb) "cid %"PRIu16" nsid %"PRIu32" slba %"PRIu64" nlb %"PRIu32"" +pci_nvme_zone_mgmt_recv(uint16_t cid, uint32_t nsid, uint64_t slba, uint64_t len, uint8_t zra, uint8_t zrasp, uint8_t zrasf) "cid %"PRIu16" nsid %"PRIu32" slba 0x%"PRIx64" len %"PRIu64" zra 0x%"PRIx8" zrasp 0x%"PRIx8" zrasf 0x%"PRIx8"" pci_nvme_create_sq(uint64_t addr, uint16_t sqid, uint16_t cqid, uint16_t qsize, uint16_t qflags) "create submission queue, addr=0x%"PRIx64", sqid=%"PRIu16", cqid=%"PRIu16", qsize=%"PRIu16", qflags=%"PRIu16"" pci_nvme_create_cq(uint64_t addr, uint16_t cqid, uint16_t vector, uint16_t size, uint16_t qflags, int ien) "create completion queue, addr=0x%"PRIx64", cqid=%"PRIu16", vector=%"PRIu16", qsize=%"PRIu16", qflags=%"PRIu16", ien=%d" pci_nvme_del_sq(uint16_t qid) "deleting submission queue sqid=%"PRIu16""
Signature · 1 line
2.28.0
PATCH v3 6/9 hw/block/nvme: add the zone management send command
In reply to Klaus JensenFrom: Klaus Jensen <[email protected]>
Add the Zone Management Send command.
--- hw/block/nvme.h | 2 + include/block/nvme.h | 28 +++ hw/block/nvme.c | 384 +++++++++++++++++++++++++++++++++++++++++- hw/block/trace-events | 11 ++ 4 files changed, 420 insertions(+), 5 deletions(-)
hw/block/nvme.h +2 -0
@@ -28,6 +28,7 @@ typedef struct NvmeRequest {struct NvmeNamespace *ns;BlockAIOCB *aiocb;uint16_t status; +void *opaque;NvmeCqe cqe;NvmeCmd cmd;BlockAcctCookie acct;
@@ -71,6 +72,7 @@ static inline const char *nvme_io_opc_str(uint8_t opc)case NVME_CMD_WRITE :return "NVME_NVM_CMD_WRITE" ;case NVME_CMD_READ :return "NVME_NVM_CMD_READ" ;case NVME_CMD_WRITE_ZEROES :return "NVME_NVM_CMD_WRITE_ZEROES" ; +case NVME_CMD_ZONE_MGMT_SEND :return "NVME_ZONED_CMD_ZONE_MGMT_SEND" ;case NVME_CMD_ZONE_MGMT_RECV :return "NVME_ZONED_CMD_ZONE_MGMT_RECV" ;default :return "NVME_NVM_CMD_UNKNOWN" ; }
include/block/nvme.h +28 -0
@@ -480,6 +480,7 @@ enum NvmeIoCommands {NVME_CMD_COMPARE =0x05 ,NVME_CMD_WRITE_ZEROES =0x08 ,NVME_CMD_DSM =0x09 , +NVME_CMD_ZONE_MGMT_SEND =0x79 , NVME_CMD_ZONE_MGMT_RECV = 0x7a, };
@@ -593,6 +594,32 @@ enum { NVME_RW_PRINFO_PRCHK_REF = 1 << 10, }; +typedef struct QEMU_PACKED NvmeZoneManagementSendCmd { +uint8_t opcode; +uint8_t flags; +uint16_t cid; +uint32_t nsid; +uint32_t rsvd8[4 ]; +NvmeCmdDptr dptr; +uint64_t slba; +uint32_t rsvd48; +uint8_t zsa; +uint8_t zsflags; +uint16_t rsvd54; +uint32_t rsvd56[2 ]; +} NvmeZoneManagementSendCmd; + +#define NVME_CMD_ZONE_MGMT_SEND_SELECT_ALL (zsflags) ((zsflags) & 0x1) + +typedef enum NvmeZoneManagementSendAction { +NVME_CMD_ZONE_MGMT_SEND_CLOSE =0x1 , +NVME_CMD_ZONE_MGMT_SEND_FINISH =0x2 , +NVME_CMD_ZONE_MGMT_SEND_OPEN =0x3 , +NVME_CMD_ZONE_MGMT_SEND_RESET =0x4 , +NVME_CMD_ZONE_MGMT_SEND_OFFLINE =0x5 , +NVME_CMD_ZONE_MGMT_SEND_SET_ZDE =0x10 , +}NvmeZoneManagementSendAction ; + typedef struct QEMU_PACKED NvmeZoneManagementRecvCmd {uint8_t opcode;uint8_t flags;
@@ -1206,6 +1233,7 @@ static inline void _nvme_check_size(void)QEMU_BUILD_BUG_ON (sizeof (NvmeIdentify) !=64 );QEMU_BUILD_BUG_ON (sizeof (NvmeRwCmd) !=64 );QEMU_BUILD_BUG_ON (sizeof (NvmeDsmCmd) !=64 ); +QEMU_BUILD_BUG_ON (sizeof (NvmeZoneManagementSendCmd) !=64 );QEMU_BUILD_BUG_ON (sizeof (NvmeZoneManagementRecvCmd) !=64 );QEMU_BUILD_BUG_ON (sizeof (NvmeRangeType) !=64 );QEMU_BUILD_BUG_ON (sizeof (NvmeErrorLog) !=64 );
hw/block/nvme.c +379 -5
439 lines not on this page · raw message
hw/block/trace-events +11 -0
@@ -43,7 +43,17 @@ pci_nvme_admin_cmd(uint16_t cid, uint16_t sqid, uint8_t opcode, const char *opna pci_nvme_rw(uint16_t cid, const char *verb, uint32_t nsid, uint32_t nlb, uint64_t count, uint64_t lba) "cid %"PRIu16" opname '%s' nsid %"PRIu32" nlb %"PRIu32" count %"PRIu64" lba 0x%"PRIx64"" pci_nvme_rw_cb(uint16_t cid, const char *blkname) "cid %"PRIu16" blk '%s'" pci_nvme_write_zeroes(uint16_t cid, uint32_t nsid, uint64_t slba, uint32_t nlb) "cid %"PRIu16" nsid %"PRIu32" slba %"PRIu64" nlb %"PRIu32"" +pci_nvme_zone_mgmt_send(uint16_t cid, uint32_t nsid, uint64_t zslba, uint8_t zsa, uint8_t zsflags) "cid %"PRIu16" nsid %"PRIu32" zslba 0x%"PRIx64" zsa 0x%"PRIx8" zsflags 0x%"PRIx8"" +pci_nvme_zone_mgmt_send_all(uint16_t cid, uint32_t nsid, uint8_t za) "cid %"PRIu16" nsid %"PRIu32" za 0x%"PRIx8"" +pci_nvme_zone_mgmt_send_close(uint16_t cid, uint32_t nsid, uint64_t zslba, const char *zc) "cid %"PRIu16" nsid %"PRIu32" zslba 0x%"PRIx64" zc \"%s\"" +pci_nvme_zone_mgmt_send_finish(uint16_t cid, uint32_t nsid, uint64_t zslba, const char *zc) "cid %"PRIu16" nsid %"PRIu32" zslba 0x%"PRIx64" zc \"%s\"" +pci_nvme_zone_mgmt_send_open(uint16_t cid, uint32_t nsid, uint64_t zslba, const char *zc) "cid %"PRIu16" nsid %"PRIu32" zslba 0x%"PRIx64" zc \"%s\"" +pci_nvme_zone_mgmt_send_reset(uint16_t cid, uint32_t nsid, uint64_t zslba, const char *zc) "cid %"PRIu16" nsid %"PRIu32" zslba 0x%"PRIx64" zc \"%s\"" +pci_nvme_zone_mgmt_send_reset_cb(uint16_t cid, uint32_t nsid) "cid %"PRIu16" nsid %"PRIu32"" +pci_nvme_zone_mgmt_send_offline(uint16_t cid, uint32_t nsid, uint64_t zslba, const char *zc) "cid %"PRIu16" nsid %"PRIu32" zslba 0x%"PRIx64" zc \"%s\"" +pci_nvme_zone_mgmt_send_set_zde(uint16_t cid, uint32_t nsid, uint64_t zslba, const char *zc) "cid %"PRIu16" nsid %"PRIu32" zslba 0x%"PRIx64" zc \"%s\"" pci_nvme_zone_mgmt_recv(uint16_t cid, uint32_t nsid, uint64_t slba, uint64_t len, uint8_t zra, uint8_t zrasp, uint8_t zrasf) "cid %"PRIu16" nsid %"PRIu32" slba 0x%"PRIx64" len %"PRIu64" zra 0x%"PRIx8" zrasp 0x%"PRIx8" zrasf 0x%"PRIx8"" +pci_nvme_aio_discard_cb(uint16_t cid) "cid %"PRIu16"" pci_nvme_create_sq(uint64_t addr, uint16_t sqid, uint16_t cqid, uint16_t qsize, uint16_t qflags) "create submission queue, addr=0x%"PRIx64", sqid=%"PRIu16", cqid=%"PRIu16", qsize=%"PRIu16", qflags=%"PRIu16"" pci_nvme_create_cq(uint64_t addr, uint16_t cqid, uint16_t vector, uint16_t size, uint16_t qflags, int ien) "create completion queue, addr=0x%"PRIx64", cqid=%"PRIu16", vector=%"PRIu16", qsize=%"PRIu16", qflags=%"PRIu16", ien=%d" pci_nvme_del_sq(uint16_t qid) "deleting submission queue sqid=%"PRIu16""
@@ -131,6 +141,7 @@ pci_nvme_err_invalid_setfeat(uint32_t dw10) "invalid set features, dw10=0x%"PRIx pci_nvme_err_invalid_log_page(uint16_t cid, uint16_t lid) "cid %"PRIu16" lid 0x%"PRIx16"" pci_nvme_err_invalid_zone(uint16_t cid, uint64_t lba) "cid %"PRIu16" lba 0x%"PRIx64"" pci_nvme_err_invalid_zone_condition(uint16_t cid, uint64_t zslba, uint8_t condition) "cid %"PRIu16" zslba 0x%"PRIx64" condition 0x%"PRIx8"" +pci_nvme_err_invalid_zslba(uint16_t cid, uint64_t zslba) "cid %"PRIu16" zslba 0x%"PRIx64"" pci_nvme_err_startfail_cq(void) "nvme_start_ctrl failed because there are non-admin completion queues" pci_nvme_err_startfail_sq(void) "nvme_start_ctrl failed because there are non-admin submission queues" pci_nvme_err_startfail_nbarasq(void) "nvme_start_ctrl failed because the admin submission queue address is null"
Signature · 1 line
2.28.0
PATCH v3 7/9 hw/block/nvme: add the zone append command
In reply to Klaus JensenFrom: Klaus Jensen <[email protected]>
Add the Zone Append command.
--- hw/block/nvme.h | 6 ++++++ include/block/nvme.h | 7 +++++++ hw/block/nvme.c | 46 +++++++++++++++++++++++++++++++++++++++++++ hw/block/trace-events | 1 + 4 files changed, 60 insertions(+)
hw/block/nvme.h +6 -0
@@ -16,6 +16,10 @@ typedef struct NvmeParams {uint32_t aer_max_queued;uint8_t mdts;bool use_intel_id; + +struct { +uint8_t zasl; + } zns; } NvmeParams; typedef struct NvmeAsyncEvent {
@@ -42,6 +46,7 @@ static inline bool nvme_req_is_write(NvmeRequest *req)switch (req->cmd.opcode) {case NVME_CMD_WRITE :case NVME_CMD_WRITE_ZEROES : +case NVME_CMD_ZONE_APPEND :return true;default :return false;
@@ -74,6 +79,7 @@ static inline const char *nvme_io_opc_str(uint8_t opc)case NVME_CMD_WRITE_ZEROES :return "NVME_NVM_CMD_WRITE_ZEROES" ;case NVME_CMD_ZONE_MGMT_SEND :return "NVME_ZONED_CMD_ZONE_MGMT_SEND" ;case NVME_CMD_ZONE_MGMT_RECV :return "NVME_ZONED_CMD_ZONE_MGMT_RECV" ; +case NVME_CMD_ZONE_APPEND :return "NVME_ZONED_CMD_ZONE_APPEND" ;default :return "NVME_NVM_CMD_UNKNOWN" ; } }
include/block/nvme.h +7 -0
@@ -482,6 +482,7 @@ enum NvmeIoCommands {NVME_CMD_DSM =0x09 ,NVME_CMD_ZONE_MGMT_SEND =0x79 ,NVME_CMD_ZONE_MGMT_RECV =0x7a , + NVME_CMD_ZONE_APPEND = 0x7d, }; typedef struct QEMU_PACKED NvmeDeleteQ {
@@ -1016,6 +1017,11 @@ enum NvmeIdCtrlLpa { NVME_LPA_EXTENDED = 1 << 2, }; +typedef struct QEMU_PACKED NvmeIdCtrlZns { +uint8_t zasl; +uint8_t rsvd1[4095 ]; +} NvmeIdCtrlZns; +#define NVME_CTRL_SQES_MIN (sqes) ((sqes) & 0xf)#define NVME_CTRL_SQES_MAX (sqes) (((sqes) >> 4) & 0xf)#define NVME_CTRL_CQES_MIN (cqes) ((cqes) & 0xf)
@@ -1240,6 +1246,7 @@ static inline void _nvme_check_size(void)QEMU_BUILD_BUG_ON (sizeof (NvmeFwSlotInfoLog) !=512 );QEMU_BUILD_BUG_ON (sizeof (NvmeSmartLog) !=512 );QEMU_BUILD_BUG_ON (sizeof (NvmeIdCtrl) !=4096 ); +QEMU_BUILD_BUG_ON (sizeof (NvmeIdCtrlZns) !=4096 );QEMU_BUILD_BUG_ON (sizeof (NvmeIdNsNvm) !=4096 );QEMU_BUILD_BUG_ON (sizeof (NvmeIdNsZns) !=4096 );QEMU_BUILD_BUG_ON (sizeof (NvmeSglDescriptor) !=16 );
hw/block/nvme.c +46 -0
94 lines not on this page · raw message
hw/block/trace-events +1 -0
@@ -102,6 +102,7 @@ pci_nvme_mmio_shutdown_cleared(void) "shutdown bit cleared" # nvme traces for error conditions pci_nvme_err_mdts(uint16_t cid, size_t len) "cid %"PRIu16" len %zu" +pci_nvme_err_zasl(uint16_t cid, size_t len) "cid %"PRIu16" len %zu" pci_nvme_err_req_status(uint16_t cid, uint32_t nsid, uint16_t status, uint8_t opc) "cid %"PRIu16" nsid %"PRIu32" status 0x%"PRIx16" opc 0x%"PRIx8"" pci_nvme_err_addr_read(uint64_t addr) "addr 0x%"PRIx64"" pci_nvme_err_addr_write(uint64_t addr) "addr 0x%"PRIx64""
Signature · 1 line
2.28.0
PATCH v3 8/9 hw/block/nvme: track and enforce zone resources
In reply to Klaus JensenFrom: Klaus Jensen <[email protected]>
Track number of open/active resources.
--- docs/specs/nvme.txt | 6 ++++ hw/block/nvme-ns.h | 7 +++++ include/block/nvme.h | 2 ++ hw/block/nvme-ns.c | 25 +++++++++++++++-- hw/block/nvme.c | 66 +++++++++++++++++++++++++++++++++++++++++++- 5 files changed, 102 insertions(+), 4 deletions(-)
docs/specs/nvme.txt +6 -0
@@ -14,6 +14,12 @@ The nvme device (-device nvme) emulates an NVM Express Controller. zns.zcap; if the zone capacity is a power of two, the zone size will be set to that, otherwise it will default to the next power of two. + `zns.mar`; Specifies the number of active resources available. This is a 0s + based value. + + `zns.mor`; Specifies the number of open resources available. This is a 0s + based value. + Reference Specifications ------------------------
hw/block/nvme-ns.h +7 -0
@@ -28,6 +28,8 @@ typedef struct NvmeNamespaceParams {uint64_t zcap;uint64_t zsze;uint8_t zdes; +uint32_t mar; +uint32_t mor; } zns; } NvmeNamespaceParams;
@@ -58,6 +60,11 @@ typedef struct NvmeNamespace {NvmeZone *zones;NvmeZoneDescriptor *zd;uint8_t *zde; + +struct { +uint32_t open; +uint32_t active; + } resources; } zns; } NvmeNamespace;
include/block/nvme.h +2 -0
@@ -775,6 +775,8 @@ enum NvmeStatusCodes {NVME_ZONE_IS_READ_ONLY =0x01ba ,NVME_ZONE_IS_OFFLINE =0x01bb ,NVME_ZONE_INVALID_WRITE =0x01bc , +NVME_TOO_MANY_ACTIVE_ZONES =0x01bd , +NVME_TOO_MANY_OPEN_ZONES =0x01be ,NVME_INVALID_ZONE_STATE_TRANSITION =0x01bf ,NVME_WRITE_FAULT =0x0280 , NVME_UNRECOVERED_READ = 0x0281,
hw/block/nvme-ns.c +22 -3
@@ -92,8 +92,8 @@ static void nvme_ns_init_zoned(NvmeNamespace *ns) ns->zns.zde =g_malloc0_n (ns->zns.num_zones,nvme_ns_zdes_bytes (ns)); } - id_ns_zns->mar =0xffffffff ; - id_ns_zns->mor =0xffffffff ; + id_ns_zns->mar =cpu_to_le32 (ns->params.zns.mar); + id_ns_zns->mor =cpu_to_le32 (ns->params.zns.mor); }static void nvme_ns_init (NvmeNamespace *ns)
@@ -130,6 +130,11 @@ static void nvme_ns_init(NvmeNamespace *ns)void nvme_ns_zns_init_zone_state (NvmeNamespace *ns) { + ns->zns.resources.active = ns->params.zns.mar !=0xffffffff ? + ns->params.zns.mar +1 : ns->zns.num_zones; + ns->zns.resources.open = ns->params.zns.mor !=0xffffffff ? + ns->params.zns.mor +1 : ns->zns.num_zones; +for (int i =0 ; i < ns->zns.num_zones; i++) {NvmeZone *zone = &ns->zns.zones[i]; zone->zd = &ns->zns.zd[i];
@@ -148,9 +153,15 @@ void nvme_ns_zns_init_zone_state(NvmeNamespace *ns)if (nvme_wp (zone) ==nvme_zslba (zone) && !(zone->zd->za &NVME_ZA_ZDEV )) {nvme_zs_set (zone,NVME_ZS_ZSE ); +break ; } -break ; +if (ns->zns.resources.active) { + ns->zns.resources.active--; +break ; + } + +/* fallthrough */ case NVME_ZS_ZSIO :case NVME_ZS_ZSEO :
@@ -207,6 +218,12 @@ static int nvme_ns_check_constraints(NvmeNamespace *ns, Error **errp)return -1 ; } +if (ns->params.zns.mor > ns->params.zns.mar) { +error_setg (errp,"maximum open resources (zns.mor) must be less " +"than or equal to maximum active resources (zns.mar)" ); +return -1 ; + } +break ;default :
@@ -272,6 +289,8 @@ static Property nvme_ns_props[] = {DEFINE_PROP_UINT64 ("zns.zcap" , NvmeNamespace, params.zns.zcap,0 ),DEFINE_PROP_UINT64 ("zns.zsze" , NvmeNamespace, params.zns.zsze,0 ),DEFINE_PROP_UINT8 ("zns.zdes" , NvmeNamespace, params.zns.zdes,0 ), +DEFINE_PROP_UINT32 ("zns.mar" , NvmeNamespace, params.zns.mar,0xffffffff ), +DEFINE_PROP_UINT32 ("zns.mor" , NvmeNamespace, params.zns.mor,0xffffffff ), DEFINE_PROP_END_OF_LIST(), };
hw/block/nvme.c +65 -1
99 lines not on this page · raw message
Signature · 1 line
2.28.0
PATCH v3 9/9 hw/block/nvme: allow open to close zone transitions by controller
In reply to Klaus JensenFrom: Klaus Jensen <[email protected]>
Allow the controller to release open resources by transitioning implicitly and explicitly opened zones to closed. This is done using a naive "least recently opened" strategy.
--- hw/block/nvme-ns.h | 5 ++++ hw/block/nvme-ns.c | 5 ++++ hw/block/nvme.c | 57 ++++++++++++++++++++++++++++++++++++++++--- hw/block/trace-events | 1 + 4 files changed, 65 insertions(+), 3 deletions(-)
hw/block/nvme-ns.h +5 -0
@@ -38,6 +38,8 @@ typedef struct NvmeZone {uint8_t *zde;uint64_t wp_staging; + +QTAILQ_ENTRY (NvmeZone) lru_entry; } NvmeZone; typedef struct NvmeNamespace {
@@ -64,6 +66,9 @@ typedef struct NvmeNamespace {struct {uint32_t open;uint32_t active; + + QTAILQ_HEAD(, NvmeZone) lru_open; + QTAILQ_HEAD(, NvmeZone) lru_active; } resources; } zns; } NvmeNamespace;
hw/block/nvme-ns.c +5 -0
@@ -135,6 +135,9 @@ void nvme_ns_zns_init_zone_state(NvmeNamespace *ns) ns->zns.resources.open = ns->params.zns.mor !=0xffffffff ? ns->params.zns.mor +1 : ns->zns.num_zones; +QTAILQ_INIT (&ns->zns.resources.lru_open); +QTAILQ_INIT (&ns->zns.resources.lru_active); +for (int i =0 ; i < ns->zns.num_zones; i++) {NvmeZone *zone = &ns->zns.zones[i]; zone->zd = &ns->zns.zd[i];
@@ -158,6 +161,8 @@ void nvme_ns_zns_init_zone_state(NvmeNamespace *ns)if (ns->zns.resources.active) { ns->zns.resources.active--; +QTAILQ_INSERT_TAIL (&ns->zns.resources.lru_active, zone, + lru_entry);break ; }
hw/block/nvme.c +54 -3
109 lines not on this page · raw message
hw/block/trace-events +1 -0
@@ -83,6 +83,7 @@ pci_nvme_enqueue_event_masked(uint8_t typ) "type 0x%"PRIx8"" pci_nvme_no_outstanding_aers(void) "ignoring event; no outstanding AERs" pci_nvme_enqueue_req_completion(uint16_t cid, uint16_t cqid, uint16_t status) "cid %"PRIu16" cqid %"PRIu16" status 0x%"PRIx16"" pci_nvme_zrm_transition(uint32_t nsid, uint64_t zslba, uint8_t from, uint8_t to) "nsid %"PRIu32" zslba 0x%"PRIx64" from 0x%"PRIx8" to 0x%"PRIx8"" +pci_nvme_zrm_release_open(uint32_t nsid) "nsid %"PRIu32"" pci_nvme_mmio_read(uint64_t addr) "addr 0x%"PRIx64"" pci_nvme_mmio_write(uint64_t addr, uint64_t data) "addr 0x%"PRIx64" data 0x%"PRIx64"" pci_nvme_mmio_doorbell_cq(uint16_t cqid, uint16_t new_head) "cqid %"PRIu16" new_head %"PRIu16""
Signature · 1 line
2.28.0