Skip to contentSkip to conversation

mips: ralink: mt7621: add zboot debug console

PATCH New Chuanhong Guo 1 participant 1 message Oct 15, 2020

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 mips: ralink: mt7621: add zboot debug console

uartlite0 at 0x1e000c00 is a 16550 compatible uart controller. It's usually used for debug console and is already configured by u-boot. Add ZBOOT_UART16550 and related definitions in uart-16550.c for zboot debug output.

---
 arch/mips/boot/compressed/uart-16550.c | 6 ++++++
 arch/mips/ralink/Kconfig               | 1 +
 2 files changed, 7 insertions(+)
arch/mips/boot/compressed/uart-16550.c +6 -0
index aee8d7b8f091..7122df28967a 100644
@@ -35,6 +35,12 @@
 #define IOTYPE unsigned int
 #endif
 
+#ifdef CONFIG_SOC_MT7621
+#define UART0_BASE  0x1e000c00
+#define PORT(offset) (CKSEG1ADDR(UART0_BASE) + (4 * offset))
+#define IOTYPE unsigned int
+#endif
+
 #ifndef IOTYPE
 #define IOTYPE char
 #endif
arch/mips/ralink/Kconfig +1 -0
index c10d8b233ab1..4c3c6ef330e3 100644
@@ -52,6 +52,7 @@ choice
 		select SYS_SUPPORTS_SMP
 		select SYS_SUPPORTS_MIPS_CPS
 		select SYS_SUPPORTS_HIGHMEM
+		select SYS_SUPPORTS_ZBOOT_UART16550
 		select MIPS_GIC
 		select COMMON_CLK
 		select CLKSRC_MIPS_GIC
Signature · 1 line
2.26.2