MTK_IOMMU: Optimize mapping / unmapping performance
Subsystems (4)
cover MTK_IOMMU: Optimize mapping / unmapping performance
For MTK platforms, mtk_iommu is using iotlb_sync(), tlb_add_range() and tlb_flush_walk/leaf()
to do tlb sync when iommu driver runs iova mapping/unmapping. But if buffer size is large, it maybe consist of many pages(4K/8K/64K/1MB......). So iommu driver maybe run many times tlb sync in mapping for this case and it will degrade performance seriously. In order to resolve the issue, we hope to add iotlb_sync_range() callback in iommu_ops, it can appiont iova and size to do tlb sync. MTK_IOMMU will use iotlb_sync_range() callback when the whole mapping/unmapping is completed and remove iotlb_sync(), tlb_add_range() and tlb_flush_walk/leaf().
So this patchset will replace iotlb_sync(), tlb_add_range() and tlb_flush_walk/leaf() withiotlb_sync_range() callback.
Chao Hao (4):
iommu: Introduce iotlb_sync_range callback
iommu/mediatek: Add iotlb_sync_range() support
iommu/mediatek: Remove unnecessary tlb sync
iommu/mediatek: Adjust iotlb_sync_range
drivers/iommu/dma-iommu.c | 9 +++++++++
drivers/iommu/iommu.c | 7 +++++++
drivers/iommu/mtk_iommu.c | 36 ++++++++----------------------------
include/linux/iommu.h | 2 ++
4 files changed, 26 insertions(+), 28 deletions(-)--
2.18.0
PATCH 1/4 iommu: Introduce iotlb_sync_range callback
Add iotlb_sync_range callback to support that driver can appoint iova and size to do tlb sync.
Iommu will call iotlb_sync_range() after the whole mapping/unmapping is completed, and the iova and size of iotlb_sync_range() are start_iova and buffer total_size respectively. At the same time, iotlb_sync() and tlb_flush_walk/leaf() can be skipped. So iotlb_sync_range() will enhance performance by reducing the time of tlb sync.
--- drivers/iommu/dma-iommu.c | 9 +++++++++ drivers/iommu/iommu.c | 7 +++++++ include/linux/iommu.h | 2 ++ 3 files changed, 18 insertions(+)
drivers/iommu/dma-iommu.c +9 -0
@@ -479,6 +479,7 @@ static dma_addr_t __iommu_dma_map(struct device *dev, phys_addr_t phys, size_t size, int prot, u64 dma_mask) { struct iommu_domain *domain = iommu_get_dma_domain(dev); +const struct iommu_ops *ops = domain->ops;struct iommu_dma_cookie *cookie = domain->iova_cookie;struct iova_domain *iovad = &cookie->iovad;size_t iova_off =iova_offset (iovad, phys);
@@ -497,6 +498,10 @@ static dma_addr_t __iommu_dma_map(struct device *dev, phys_addr_t phys,iommu_dma_free_iova (cookie, iova, size);return DMA_MAPPING_ERROR ; } + +if (ops->iotlb_sync_range) + ops->iotlb_sync_range (iova, size); +return iova + iova_off; }
@@ -1165,6 +1170,7 @@ void iommu_setup_dma_ops(struct device *dev, u64 dma_base, u64 size)static struct iommu_dma_msi_page *iommu_dma_get_msi_page (struct device *dev,phys_addr_t msi_addr,struct iommu_domain *domain) { +const struct iommu_ops *ops = domain->ops;struct iommu_dma_cookie *cookie = domain->iova_cookie;struct iommu_dma_msi_page *msi_page;dma_addr_t iova;
@@ -1187,6 +1193,9 @@ static struct iommu_dma_msi_page *iommu_dma_get_msi_page(struct device *dev,if (iommu_map (domain, iova, msi_addr, size, prot)) goto out_free_iova; +if (ops->iotlb_sync_range) + ops->iotlb_sync_range (iova, size); +INIT_LIST_HEAD (&msi_page->list); msi_page->phys = msi_addr; msi_page->iova = iova;
drivers/iommu/iommu.c +7 -0
@@ -2304,6 +2304,9 @@ static size_t __iommu_unmap(struct iommu_domain *domain, unmapped += unmapped_page; } +if (ops->iotlb_sync_range) + ops->iotlb_sync_range (iova, size); +trace_unmap (orig_iova, size, unmapped);return unmapped; }
@@ -2334,6 +2337,7 @@ static size_t __iommu_map_sg(struct iommu_domain *domain, unsigned long iova, struct scatterlist *sg, unsigned int nents, int prot, gfp_t gfp) { + const struct iommu_ops *ops = domain->ops;size_t len =0 , mapped =0 ;phys_addr_t start;unsigned int i =0 ;
@@ -2364,6 +2368,9 @@ static size_t __iommu_map_sg(struct iommu_domain *domain, unsigned long iova, sg =sg_next (sg); } +if (ops->iotlb_sync_range) + ops->iotlb_sync_range (iova, mapped); +return mapped; out_err:
include/linux/iommu.h +2 -0
@@ -192,6 +192,7 @@ struct iommu_iotlb_gather {* @map: map a physically contiguous memory region to an iommu domain * @unmap: unmap a physically contiguous memory region from an iommu domain * @flush_iotlb_all: Synchronously flush all hardware TLBs for this domain +* @iotlb_sync_range: Sync specific iova and size mappings to the hardware * @iotlb_sync_map: Sync mappings created recently using @map to the hardware * @iotlb_sync: Flush all queued ranges from the hardware TLBs and empty flush * queue
@@ -244,6 +245,7 @@ struct iommu_ops {size_t (*unmap)(struct iommu_domain *domain,unsigned long iova,size_t size,struct iommu_iotlb_gather *iotlb_gather);void (*flush_iotlb_all)(struct iommu_domain *domain); +void (*iotlb_sync_range)(unsigned long iova,size_t size);void (*iotlb_sync_map)(struct iommu_domain *domain);void (*iotlb_sync)(struct iommu_domain *domain,struct iommu_iotlb_gather *iotlb_gather);
Signature · 5 lines
2.18.0 _______________________________________________ iommu mailing list [email protected] https://lists.linuxfoundation.org/mailman/listinfo/iommu
PATCH 2/4 iommu/mediatek: Add iotlb_sync_range() support
In reply to Chao HaoMTK_IOMMU driver writes one page entry and does tlb flush at a time currently. More optimal would be to aggregate the writes and flush BUS buffer in the end.
For 50MB buffer mapping, if mtk_iommu driver use iotlb_sync_range() instead of tlb_add_range() and tlb_flush_walk/leaf(), it can increase 50% performance or more(depending on size of every page size) in comparison to flushing after each page entry update. So we prefer to use iotlb_sync_range() to replace iotlb_sync(), tlb_add_range() and tlb_flush_walk/leaf() for MTK platforms.
--- drivers/iommu/mtk_iommu.c | 6 ++++++ 1 file changed, 6 insertions(+)
drivers/iommu/mtk_iommu.c +6 -0
@@ -224,6 +224,11 @@ static void mtk_iommu_tlb_flush_range_sync(unsigned long iova, size_t size, } } +static void __mtk_iommu_tlb_flush_range_sync (unsigned long iova,size_t size) +{ + mtk_iommu_tlb_flush_range_sync(iova, size, 0, NULL) +} +static void mtk_iommu_tlb_flush_page_nosync (struct iommu_iotlb_gather *gather,unsigned long iova,size_t granule,void *cookie)
@@ -536,6 +541,7 @@ static const struct iommu_ops mtk_iommu_ops = { .map = mtk_iommu_map, .unmap = mtk_iommu_unmap, .flush_iotlb_all = mtk_iommu_flush_iotlb_all, + .iotlb_sync_range = __mtk_iommu_tlb_flush_range_sync, .iotlb_sync = mtk_iommu_iotlb_sync, .iova_to_phys = mtk_iommu_iova_to_phys, .probe_device = mtk_iommu_probe_device,
Signature · 5 lines
2.18.0 _______________________________________________ iommu mailing list [email protected] https://lists.linuxfoundation.org/mailman/listinfo/iommu
Robin Murphy
maintainerRe: [PATCH 2/4] iommu/mediatek: Add iotlb_sync_range() support
Quoted 3 lines · Chao Hao
MTK_IOMMUdriver writes one page entry and does tlb flush at a time currently. More optimal would be to aggregate the writes and flush BUS buffer in the end.
That's exactly what iommu_iotlb_gather_add_page() is meant to achieve. Rather than jumping straight into hacking up a new API to go round the back of the existing API design, it would be far better to ask the question of why that's not behaving as expected.
Quoted 6 lines
For 50MB buffer mapping, if
mtk_iommudriver useiotlb_sync_range()instead oftlb_add_range()and tlb_flush_walk/leaf(), it can increase 50% performance or more(depending on size of every page size) in comparison to flushing after each page entry update. So we prefer to useiotlb_sync_range()to replaceiotlb_sync(),tlb_add_range()and tlb_flush_walk/leaf() for MTK platforms.
In the case of mapping, it sounds like what you actually want to do is hook up .iotlb_sync_map and generally make IO_PGTABLE_QUIRK_TLBI_ON_MAP cleverer, because the current implementation is as dumb as it could possibly be. In fact if we simply passed an address range to .iotlb_sync_map, io-pgtable probably wouldn't need to be involved at all any more.
Robin.
Quoted 30 lines
Signed-off-by Chao Hao <[email protected]>--- drivers/iommu/mtk_iommu.c | 6 ++++++ 1 file changed, 6 insertions(+)drivers/iommu/mtk_iommu.c +6
-0@@ -224,6 +224,11 @@ static void mtk_iommu_tlb_flush_range_sync(unsigned long iova, size_t size, } } +static void __mtk_iommu_tlb_flush_range_sync (unsigned long iova,size_t size) +{ + mtk_iommu_tlb_flush_range_sync(iova, size, 0, NULL) +} +static void mtk_iommu_tlb_flush_page_nosync (struct iommu_iotlb_gather *gather,unsigned long iova,size_t granule,void *cookie)@@ -536,6 +541,7 @@ static const struct iommu_ops mtk_iommu_ops = { .map = mtk_iommu_map, .unmap = mtk_iommu_unmap, .flush_iotlb_all = mtk_iommu_flush_iotlb_all, + .iotlb_sync_range = __mtk_iommu_tlb_flush_range_sync, .iotlb_sync = mtk_iommu_iotlb_sync, .iova_to_phys = mtk_iommu_iova_to_phys, .probe_device = mtk_iommu_probe_device,
Re: [PATCH 2/4] iommu/mediatek: Add iotlb_sync_range() support
Quoted 9 lines · Robin Murphy
Quoted 3 lines · Chao Hao
MTK_IOMMUdriver writes one page entry and does tlb flush at a time currently. More optimal would be to aggregate the writes and flush BUS buffer in the end.That's exactly what
iommu_iotlb_gather_add_page()is meant to achieve. Rather than jumping straight into hacking up a new API to go round the back of the existing API design, it would be far better to ask the question of why that's not behaving as expected.
Thanks for you review!
iommu_iotlb_gather_add_page is put in io_pgtable_tlb_add_page(). io_pgtable_tlb_add_page() only be called in
unmapping and mapping flow doesn't have it in linux iommu driver, but mtk iommu needs to do tlb sync in mapping
and unmapping to avoid old data being in the iommu tlb.
In addtion, we hope to do tlb sync once when all the pages mapping done. iommu_iotlb_gather_add_page maybe do
tlb sync more than once. because one whole buffer consists of different page size(1MB/64K/4K).
Based on the previous considerations, don't find more appropriate the way of tlb sync for mtk iommu, so we add a new API.
Quoted 8 lines
Quoted 7 lines
For 50MB buffer mapping, if
mtk_iommudriver useiotlb_sync_range()instead oftlb_add_range()and tlb_flush_walk/leaf(), it can increase 50% performance or more(depending on size of every page size) in comparison to flushing after each page entry update. So we prefer to useiotlb_sync_range()to replaceiotlb_sync(),tlb_add_range()and tlb_flush_walk/leaf() for MTK platforms.
Quoted 4 lines
In the case of mapping, it sounds like what you actually want to do is hook up .iotlb_sync_map and generally make
IO_PGTABLE_QUIRK_TLBI_ON_MAPcleverer, because the current implementation is as dumb as it could possibly be.
iotlb_sync_map only has one parameter(iommu_domain), but mtk iommu_domain maybe include the whole iova space, if mtk_iommu to do tlb sync based on iommu_domain, it is equivalent to do tlb flush all in fact.
iommu driver will do tlb sync in every mapping page when mtk iommu sets IO_PGTABLE_QUIRK_TLBI_ON_MAP(io_pgtable_tlb_flush_walk),
as is the commit message mentioned, it will drop mapping performance in mtk platform.
Quoted 3 lines
In fact if we simply passed an address range to .iotlb_sync_map, io-pgtable probably wouldn't need to be involved at all any more.
I know it is not a good idea probably by adding a new api, but I found out that tlb sync only to be done after mapping one page, so if mtk_iommu hope to do tlb sync once after all the pages map done, could you give me some advices? thanks!
Quoted 25 lines
Robin.
Quoted 22 lines
Signed-off-by Chao Hao <[email protected]>--- drivers/iommu/mtk_iommu.c | 6 ++++++ 1 file changed, 6 insertions(+)drivers/iommu/mtk_iommu.c +5
-0@@ -224,6 +224,11 @@ static void mtk_iommu_tlb_flush_range_sync(unsigned long iova, size_t size, } } +static void __mtk_iommu_tlb_flush_range_sync (unsigned long iova,size_t size) +{ + mtk_iommu_tlb_flush_range_sync(iova, size, 0, NULL) +} +static void mtk_iommu_tlb_flush_page_nosync (struct iommu_iotlb_gather *gather,unsigned long iova,size_t granule,void *cookie)@@ -536,6 +541,7 @@ static const struct iommu_ops mtk_iommu_ops = {
Quoted 8 lines
drivers/iommu/mtk_iommu.c static const struct iommu_ops mtk_iommu_ops = { · line 547
Quoted 8 lines
drivers/iommu/mtk_iommu.c +1
-0.map = mtk_iommu_map, .unmap = mtk_iommu_unmap, .flush_iotlb_all = mtk_iommu_flush_iotlb_all, + .iotlb_sync_range = __mtk_iommu_tlb_flush_range_sync, .iotlb_sync = mtk_iommu_iotlb_sync, .iova_to_phys = mtk_iommu_iova_to_phys, .probe_device = mtk_iommu_probe_device,
_______________________________________________
iommu mailing list
[email protected]
https://lists.linuxfoundation.org/mailman/listinfo/iommu
Re: [PATCH 2/4] iommu/mediatek: Add iotlb_sync_range() support
Quoted 40 lines · chao hao
Quoted 9 lines · Robin Murphy
Quoted 3 lines · Chao Hao
MTK_IOMMUdriver writes one page entry and does tlb flush at a time currently. More optimal would be to aggregate the writes and flush BUS buffer in the end.That's exactly what
iommu_iotlb_gather_add_page()is meant to achieve. Rather than jumping straight into hacking up a new API to go round the back of the existing API design, it would be far better to ask the question of why that's not behaving as expected.Thanks for you review!
iommu_iotlb_gather_add_pageis put inio_pgtable_tlb_add_page().io_pgtable_tlb_add_page()only be called in
unmapping and mapping flow doesn't have it in linux iommu driver, but mtk iommu needs to do tlb sync in mapping
and unmapping to avoid old data being in the iommu tlb.In addtion, we hope to do tlb sync once when all the pages mapping done.
iommu_iotlb_gather_add_pagemaybe do
tlb sync more than once. because one whole buffer consists of different page size(1MB/64K/4K).Based on the previous considerations, don't find more appropriate the way of tlb sync for mtk iommu, so we add a new API.
Quoted 8 lines
Quoted 7 lines
For 50MB buffer mapping, if
mtk_iommudriver useiotlb_sync_range()instead oftlb_add_range()and tlb_flush_walk/leaf(), it can increase 50% performance or more(depending on size of every page size) in comparison to flushing after each page entry update. So we prefer to useiotlb_sync_range()to replaceiotlb_sync(),tlb_add_range()and tlb_flush_walk/leaf() for MTK platforms.Quoted 4 lines
In the case of mapping, it sounds like what you actually want to do is hook up .iotlb_sync_map and generally make
IO_PGTABLE_QUIRK_TLBI_ON_MAPcleverer, because the current implementation is as dumb as it could possibly be.
Quoted 13 lines
iotlb_sync_maponly has oneparameter(iommu_domain), but mtkiommu_domainmaybe include the whole iova space, ifmtk_iommuto do tlb sync based oniommu_domain, it is equivalent to do tlb flush all in fact.
iommu driver will do tlb sync in every mapping page when mtk iommu setsIO_PGTABLE_QUIRK_TLBI_ON_MAP(io_pgtable_tlb_flush_walk),
as is the commit message mentioned, it will drop mapping performance in mtk platform.Quoted 3 lines
In fact if we simply passed an address range to .iotlb_sync_map, io-pgtable probably wouldn't need to be involved at all any more.
Sorry, I forget to reply the question in previous mail.
Do you mean we need to modify iotlb_sync_map() input parameter(ex: add start/end iova)?
Quoted 40 lines
I know it is not a good idea probably by adding a new api, but I found out that tlb sync only to be done after mapping one page, so if
mtk_iommuhope to do tlb sync once after all the pages map done, could you give me some advices? thanks!Quoted 33 lines
Robin.
Quoted 30 lines
Signed-off-by Chao Hao <[email protected]>--- drivers/iommu/mtk_iommu.c | 6 ++++++ 1 file changed, 6 insertions(+)drivers/iommu/mtk_iommu.c +6
-0@@ -224,6 +224,11 @@ static void mtk_iommu_tlb_flush_range_sync(unsigned long iova, size_t size, } } +static void __mtk_iommu_tlb_flush_range_sync (unsigned long iova,size_t size) +{ + mtk_iommu_tlb_flush_range_sync(iova, size, 0, NULL) +} +static void mtk_iommu_tlb_flush_page_nosync (struct iommu_iotlb_gather *gather,unsigned long iova,size_t granule,void *cookie)@@ -536,6 +541,7 @@ static const struct iommu_ops mtk_iommu_ops = { .map = mtk_iommu_map, .unmap = mtk_iommu_unmap, .flush_iotlb_all = mtk_iommu_flush_iotlb_all, + .iotlb_sync_range = __mtk_iommu_tlb_flush_range_sync, .iotlb_sync = mtk_iommu_iotlb_sync, .iova_to_phys = mtk_iommu_iova_to_phys, .probe_device = mtk_iommu_probe_device,
Robin Murphy
maintainerRe: [PATCH 2/4] iommu/mediatek: Add iotlb_sync_range() support
In reply to chao haoQuoted 11 lines · chao hao
Quoted 9 lines · Robin Murphy
Quoted 3 lines · Chao Hao
MTK_IOMMUdriver writes one page entry and does tlb flush at a time currently. More optimal would be to aggregate the writes and flush BUS buffer in the end.That's exactly what
iommu_iotlb_gather_add_page()is meant to achieve. Rather than jumping straight into hacking up a new API to go round the back of the existing API design, it would be far better to ask the question of why that's not behaving as expected.
Quoted 7 lines
Thanks for you review!
iommu_iotlb_gather_add_pageis put inio_pgtable_tlb_add_page().io_pgtable_tlb_add_page()only be called in
unmapping and mapping flow doesn't have it in linux iommu driver, but mtk iommu needs to do tlb sync in mapping
and unmapping to avoid old data being in the iommu tlb.
Right, as I suspected, if it's primarily about the map path then the answer is to use the existing API intended to accommodate that specific case; if that API doesn't quite do what you need, then just fix it! It doesn't make sense to clutter up the IOMMU core with multiple overlapping APIs for TLB invalidation, especially when TLB invalidation ultimately isn't all that complicated.
Quoted 4 lines
In addtion, we hope to do tlb sync once when all the pages mapping done.
iommu_iotlb_gather_add_pagemaybe do
tlb sync more than once. because one whole buffer consists of different page size(1MB/64K/4K).
So if your hardware doesn't care about the granule size used for invalidation matching the underlying mapping, use an implementation of iommu_flush_ops::tlb_add_page that doesn't care about the granule size!
Quoted 2 lines
Based on the previous considerations, don't find more appropriate the way of tlb sync for mtk iommu, so we add a new API.
I know I'm probably more familiar with this code than most people, but from my perspective, this reads like "my car was dirty, so I had to buy a new car" ;)
Quoted 12 lines
Quoted 11 lines
Quoted 6 lines
For 50MB buffer mapping, if
mtk_iommudriver useiotlb_sync_range()instead oftlb_add_range()and tlb_flush_walk/leaf(), it can increase 50% performance or more(depending on size of every page size) in comparison to flushing after each page entry update. So we prefer to useiotlb_sync_range()to replaceiotlb_sync(),tlb_add_range()and tlb_flush_walk/leaf() for MTK platforms.In the case of mapping, it sounds like what you actually want to do is hook up .iotlb_sync_map and generally make
IO_PGTABLE_QUIRK_TLBI_ON_MAPcleverer, because the current implementation is as dumb as it could possibly be.
Quoted 4 lines
iotlb_sync_maponly has oneparameter(iommu_domain), but mtkiommu_domainmaybe include the whole iova space, ifmtk_iommuto do tlb sync based oniommu_domain, it is equivalent to do tlb flush all in fact.
The first, and so far only, user of this API is the Tegra GART, which can only do a "flush all" operation, so the API is currently only as complex as it needs to be, which is to say "not very". There are plenty of options.
Quoted 4 lines
iommu driver will do tlb sync in every mapping page when mtk iommu sets
IO_PGTABLE_QUIRK_TLBI_ON_MAP(io_pgtable_tlb_flush_walk),
as is the commit message mentioned, it will drop mapping performance in mtk platform.
And as I said, that quirk is implemented in a really simplistic way, which is sure to be functionally correct, but has never been given any performance consideration.
Quoted 8 lines
Quoted 3 lines
In fact if we simply passed an address range to .iotlb_sync_map, io-pgtable probably wouldn't need to be involved at all any more.
I know it is not a good idea probably by adding a new api, but I found out that tlb sync only to be done after mapping one page, so if
mtk_iommuhope to do tlb sync once after all the pages map done, could you give me some advices? thanks!
Getting rid of IO_PGTABLE_QUIRK_TLBI_ON_MAP and simply wiring .iotlb_sync_map to .flush_iotlb_all is certainly the easiest way to make .map quicker, although it will obviously have *some* impact on any other live mappings. Given that in principle this should have the least CPU overhead, then depending on TLB usage patterns there's a small chance it might actually work out as a reasonable tradeoff, so I wouldn't necessarily rule it out as a viable option without at least trying some tests.
If it's cheap to *issue* invalidation commands, and the expense is in waiting for them to actually complete, then you could still fire off an invalidate for each page from .map, then wire up the sync (wait) step to .iotlb_sync_map, still without needing any core changes.
Otherwise, it would seem reasonable to pass the complete address and size of the iommu_map() operation to .iotlb_sync_map, so drivers can perform their whole invalidation operation synchronously there.
What I *don't* think makes sense is to try passing a gather structure through .map in the same way as for .unmap. That seems a bit too invasive for what is still a fairly exceptional case, and half the stuff that unmap operations will use the gather data for - freelists and such - won't ever be relevant to map operations, so symmetry isn't really an argument either.
Robin.
Quoted 36 lines
Quoted 22 lines
Quoted 22 lines
Signed-off-by Chao Hao <[email protected]>--- drivers/iommu/mtk_iommu.c | 6 ++++++ 1 file changed, 6 insertions(+)drivers/iommu/mtk_iommu.c +5
-0@@ -224,6 +224,11 @@ static void mtk_iommu_tlb_flush_range_sync(unsigned long iova, size_t size, } } +static void __mtk_iommu_tlb_flush_range_sync (unsigned long iova,size_t size) +{ + mtk_iommu_tlb_flush_range_sync(iova, size, 0, NULL) +} +static void mtk_iommu_tlb_flush_page_nosync (struct iommu_iotlb_gather *gather,unsigned long iova,size_t granule,void *cookie)@@ -536,6 +541,7 @@ static const struct iommu_ops mtk_iommu_ops = {Quoted 8 lines
drivers/iommu/mtk_iommu.c static const struct iommu_ops mtk_iommu_ops = { · line 547
Quoted 8 lines
drivers/iommu/mtk_iommu.c +1
-0.map = mtk_iommu_map, .unmap = mtk_iommu_unmap, .flush_iotlb_all = mtk_iommu_flush_iotlb_all, + .iotlb_sync_range = __mtk_iommu_tlb_flush_range_sync, .iotlb_sync = mtk_iommu_iotlb_sync, .iova_to_phys = mtk_iommu_iova_to_phys, .probe_device = mtk_iommu_probe_device,_______________________________________________
iommu mailing list
[email protected]
https://lists.linuxfoundation.org/mailman/listinfo/iommu
PATCH 3/4 iommu/mediatek: Remove unnecessary tlb sync
In reply to Chao HaoAs is "[PATCH 2/4]" described, we will use iotlb_sync_range() to replace iotlb_sync(), tlb_add_range() and tlb_flush_walk/leaf() to enhance performance. So we will remove the implementation of iotlb_sync(), tlb_add_range() and tlb_flush_walk/leaf().
--- drivers/iommu/mtk_iommu.c | 28 ++++------------------------ 1 file changed, 4 insertions(+), 24 deletions(-)
drivers/iommu/mtk_iommu.c +4 -24
@@ -229,21 +229,15 @@ static void __mtk_iommu_tlb_flush_range_sync(unsigned long iova, size_t size) mtk_iommu_tlb_flush_range_sync(iova, size, 0, NULL) } -static void mtk_iommu_tlb_flush_page_nosync (struct iommu_iotlb_gather *gather, -unsigned long iova,size_t granule, -void *cookie) +static void mtk_iommu_tlb_flush_skip (unsigned long iova,size_t size, +size_t granule,void *cookie) { -struct mtk_iommu_data *data = cookie; -struct iommu_domain *domain = &data->m4u_dom->domain; - -iommu_iotlb_gather_add_page (domain, gather, iova, granule); }static const struct iommu_flush_ops mtk_iommu_flush_ops = { .tlb_flush_all = mtk_iommu_tlb_flush_all, - .tlb_flush_walk = mtk_iommu_tlb_flush_range_sync, - .tlb_flush_leaf = mtk_iommu_tlb_flush_range_sync, - .tlb_add_page = mtk_iommu_tlb_flush_page_nosync, + .tlb_flush_walk = mtk_iommu_tlb_flush_skip, + .tlb_flush_leaf = mtk_iommu_tlb_flush_skip, };static irqreturn_t mtk_iommu_isr (int irq,void *dev_id)
@@ -443,19 +437,6 @@ static void mtk_iommu_flush_iotlb_all(struct iommu_domain *domain)mtk_iommu_tlb_flush_all (mtk_iommu_get_m4u_data ()); } -static void mtk_iommu_iotlb_sync (struct iommu_domain *domain, -struct iommu_iotlb_gather *gather) -{ -struct mtk_iommu_data *data =mtk_iommu_get_m4u_data (); -size_t length = gather->end - gather->start; - -if (gather->start ==ULONG_MAX ) -return ; - -mtk_iommu_tlb_flush_range_sync (gather->start, length, gather->pgsize, - data); -} -static phys_addr_t mtk_iommu_iova_to_phys (struct iommu_domain *domain,dma_addr_t iova) {
@@ -542,7 +523,6 @@ static const struct iommu_ops mtk_iommu_ops = { .unmap = mtk_iommu_unmap, .flush_iotlb_all = mtk_iommu_flush_iotlb_all, .iotlb_sync_range = __mtk_iommu_tlb_flush_range_sync, - .iotlb_sync = mtk_iommu_iotlb_sync, .iova_to_phys = mtk_iommu_iova_to_phys, .probe_device = mtk_iommu_probe_device, .release_device = mtk_iommu_release_device,
Signature · 5 lines
2.18.0 _______________________________________________ iommu mailing list [email protected] https://lists.linuxfoundation.org/mailman/listinfo/iommu
PATCH 4/4 iommu/mediatek: Adjust iotlb_sync_range
In reply to Chao HaoAs is title, the patch only adjusts the architecture of iotlb_sync_range().
No functional change.
--- drivers/iommu/mtk_iommu.c | 14 ++++---------- 1 file changed, 4 insertions(+), 10 deletions(-)
drivers/iommu/mtk_iommu.c +4 -10
@@ -191,10 +191,9 @@ static void mtk_iommu_tlb_flush_all(void *cookie) } } -static void mtk_iommu_tlb_flush_range_sync (unsigned long iova,size_t size, -size_t granule,void *cookie) +static void mtk_iommu_tlb_flush_range_sync (unsigned long iova,size_t size) { -struct mtk_iommu_data *data = cookie; +struct mtk_iommu_data *data;unsigned long flags;int ret;u32 tmp;
@@ -216,7 +215,7 @@ static void mtk_iommu_tlb_flush_range_sync(unsigned long iova, size_t size,if (ret) {dev_warn (data->dev,"Partial TLB flush timed out, falling back to full flush\n" ); -mtk_iommu_tlb_flush_all (cookie); +mtk_iommu_tlb_flush_all (data); }/* Clear the CPE status */ writel_relaxed (0 , data->base +REG_MMU_CPE_DONE );
@@ -224,11 +223,6 @@ static void mtk_iommu_tlb_flush_range_sync(unsigned long iova, size_t size, } } -static void __mtk_iommu_tlb_flush_range_sync (unsigned long iova,size_t size) -{ - mtk_iommu_tlb_flush_range_sync(iova, size, 0, NULL) -} -static void mtk_iommu_tlb_flush_skip (unsigned long iova,size_t size,size_t granule,void *cookie) {
@@ -522,7 +516,7 @@ static const struct iommu_ops mtk_iommu_ops = { .map = mtk_iommu_map, .unmap = mtk_iommu_unmap, .flush_iotlb_all = mtk_iommu_flush_iotlb_all, - .iotlb_sync_range = __mtk_iommu_tlb_flush_range_sync, + .iotlb_sync_range = mtk_iommu_tlb_flush_range_sync, .iova_to_phys = mtk_iommu_iova_to_phys, .probe_device = mtk_iommu_probe_device, .release_device = mtk_iommu_release_device,
Signature · 5 lines
2.18.0 _______________________________________________ iommu mailing list [email protected] https://lists.linuxfoundation.org/mailman/listinfo/iommu