Skip to contentSkip to conversation

arm64: dts: imx8mm: Add support for micfil

PATCH Applied Adam Ford 3 participants 6 messages Oct 19, 2020 – Oct 31, 2020

Subsystems (2)
lore
Share & tools
lore

Adam Ford

author
#0 lore raw

PATCH v2 1/3 arm64: dts: imx8mm: Add support for micfil

The i.MX8M Mini has supports the MICFIL digital interface. It's a 16-bit audio signal from a PDM microphone bitstream. The driver is already in the kernel, but the node is missing.

This patch adds the micfil node.

---
V2: No change

arch/arm64/boot/dts/freescale/imx8mm.dtsi +19 -0
index b83f400def8b..fad1f9cdb241 100644
@@ -339,6 +339,25 @@ sai6: sai@30060000 {
 				status = "disabled";
 			};
 
+			micfil: audio-controller@30080000 {
+				compatible = "fsl,imx8mm-micfil";
+				reg = <0x30080000 0x10000>;
+				interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_PDM_IPG>,
+					 <&clk IMX8MM_CLK_PDM_ROOT>,
+					 <&clk IMX8MM_AUDIO_PLL1_OUT>,
+					 <&clk IMX8MM_AUDIO_PLL2_OUT>,
+					 <&clk IMX8MM_CLK_EXT3>;
+				clock-names = "ipg_clk", "ipg_clk_app",
+					      "pll8k", "pll11k", "clkext3";
+				dmas = <&sdma2 24 25 0x80000000>;
+				dma-names = "rx";
+				status = "disabled";
+			};
+
 			gpio1: gpio@30200000 {
 				compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio";
 				reg = <0x30200000 0x10000>;
Signature · 1 line
2.25.1
author
#1 lore raw

PATCH v2 2/3 arm64: dts: imx8mm: Add node for SPDIF

The i.MX8M Mini can support SPDIF which is compatible to the IP used on the i.MX35. Add the node.

---
V2: Fix some typos

arch/arm64/boot/dts/freescale/imx8mm.dtsi +24 -0
index fad1f9cdb241..7cc2899db12e 100644
@@ -358,6 +358,30 @@ micfil: audio-controller@30080000 {
 				status = "disabled";
 			};
 
+			spdif1: spdif@30090000 {
+				compatible = "fsl,imx35-spdif";
+				reg = <0x30090000 0x10000>;
+				interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_AUDIO_AHB>, /* core */
+					 <&clk IMX8MM_CLK_24M>, /* rxtx0 */
+					 <&clk IMX8MM_CLK_SPDIF1>, /* rxtx1 */
+					 <&clk IMX8MM_CLK_DUMMY>, /* rxtx2 */
+					 <&clk IMX8MM_CLK_DUMMY>, /* rxtx3 */
+					 <&clk IMX8MM_CLK_DUMMY>, /* rxtx4 */
+					 <&clk IMX8MM_CLK_AUDIO_AHB>, /* rxtx5 */
+					 <&clk IMX8MM_CLK_DUMMY>, /* rxtx6 */
+					 <&clk IMX8MM_CLK_DUMMY>, /* rxtx7 */
+					 <&clk IMX8MM_CLK_DUMMY>; /* spba */
+				clock-names = "core", "rxtx0",
+					      "rxtx1", "rxtx2",
+					      "rxtx3", "rxtx4",
+					      "rxtx5", "rxtx6",
+					      "rxtx7", "spba";
+				dmas = <&sdma2 28 18 0>, <&sdma2 29 18 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
 			gpio1: gpio@30200000 {
 				compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio";
 				reg = <0x30200000 0x10000>;
Signature · 1 line
2.25.1
author
#2 lore raw

PATCH v2 3/3 arm64: defconfig: Enable additional sound drivers on i.MX8M Mini

In reply to Adam Ford

The i.MX8M Mini has micfil and SPDIF support but the drivers are not being loaded.

This patch updates the defconfig to add support for these drivers.

---
V2: No Change

arch/arm64/configs/defconfig +4 -0
index e0f33826819f..20362359b212 100644
@@ -674,6 +674,10 @@ CONFIG_SND_HDA_CODEC_HDMI=m
 CONFIG_SND_SOC=y
 CONFIG_SND_BCM2835_SOC_I2S=m
 CONFIG_SND_SOC_FSL_SAI=m
+CONFIG_SND_SOC_FSL_MICFIL=m
+CONFIG_SND_IMX_SOC=m
+CONFIG_SND_SOC_IMX_SPDIF=m
+CONFIG_SND_SOC_IMX_AUDMIX=m
 CONFIG_SND_MESON_AXG_SOUND_CARD=m
 CONFIG_SND_MESON_GX_SOUND_CARD=m
 CONFIG_SND_SOC_SDM845=m
Signature · 1 line
2.25.1
Applied
#5 lore raw
In reply to Adam Ford
Quoted 7 lines · Adam Ford

The i.MX8M Mini has supports the MICFIL digital interface. It's a 16-bit audio signal from a PDM microphone bitstream. The driver is already in the kernel, but the node is missing.

This patch adds the micfil node.

Applied all, thanks.