Skip to contentSkip to conversation

can: j1939: rename jacd tool

PATCH Applied [email protected] 2 participants 2 messages Oct 20, 2020

Subsystems (5)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 can: j1939: rename jacd tool

From: Yegor Yefremov <[email protected]>

Due to naming conflicts, jacd was renamed to j1939acd.

---
 Documentation/networking/j1939.rst | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
Documentation/networking/j1939.rst +2 -2
index f5be243d250a..65b12abcc90a 100644
@@ -376,8 +376,8 @@ only j1939.addr changed to the new SA, and must then send a valid address claim
 packet. This restarts the state machine in the kernel (and any other
 participant on the bus) for this NAME.
 
-can-utils also include the jacd tool, so it can be used as code example or as
-default Address Claiming daemon.
+can-utils also include the j1939acd tool, so it can be used as code example or
+as default Address Claiming daemon.
 
 Send Examples
 -------------
Signature · 1 line
2.17.0
maintainer Applied
#1 lore raw
Quoted 5 lines · On 10/20/20 10:11 AM, [email protected] wrote:

From: Yegor Yefremov <[email protected]>

Due to naming conflicts, jacd was renamed to j1939acd.

Applied to linux-can.

Tnx,
Marc

Signature · 4 lines
Pengutronix e.K.                 | Marc Kleine-Budde           |
Embedded Linux                   | https://www.pengutronix.de  |
Vertretung West/Dortmund         | Phone: +49-231-2826-924     |
Amtsgericht Hildesheim, HRA 2686 | Fax:   +49-5121-206917-5555 |