package/gcc: Fix libs building on ARC700 with atomics
PATCH 1/1 package/gcc: Fix libs building on ARC700 with atomics
As we many times by now discussed that - some ARC cores might not have atomic instructions implemented. Namely that's ARC700 w/o explicitly added atomics during design creation/configuration.
Because of that when GCC gets configured for ARC700, i.e. via "--with-cpu=arc700" atomic ops are assumed disabled.
Usually it's not a problem as we add "-matomics" in the wraper for building all packages if targets CPU has atomis (BR2_ARC_ATOMIC_EXT).
But when bulding target's binaries which are essential parts of the GCC itself we don't use the wrapper. Instead xgcc is being used. That way we lose that important part of system's configuration about atomics and:
1. Atomic ops won't be used where otherwise they could have been used.
2. Some configuration checks might end-up thinking there're no atomics
In particular (2) leads to pretty obscure failure on bulding of some packages which use C++, for example:
log4cplus: http://autobuild.buildroot.net/results/a7732fdb2ba526a114d9fb759814236c5332f8d7
------------------------>8--------------------
./.libs/liblog4cplus.so: undefined reference to `std::__atomic_futex_unsigned_base::_M_futex_notify_all(unsigned int*)'
collect2: error: ld returned 1 exit status
------------------------>8--------------------
bitcoin: http://autobuild.buildroot.net/results/f73/f73d4c77e5fd6223abdbc83e344addcfc93227b8
------------------------>8--------------------
(.text+0x110c): undefined reference to `std::__atomic_futex_unsigned_base::_M_futex_wait_until(unsigned int*, unsigned int, bool, std::chrono::duration<long long, std::ratio<1ll, 1ll> >, std::chrono::duration<long long, std::ratio<1ll, 1000000000ll> >)'
collect2: error: ld returned 1 exit status
------------------------>8--------------------
apcupsd: http://autobuild.buildroot.net/results/7a2/7a2cc7a4ac2237c185817f75e55e05d144efd100
------------------------>8--------------------/tmp/instance-0/output-1/host/lib/gcc/arc-buildroot-linux-uclibc/9.3.1/../../../../arc-buildroot-linux-uclibc/bin/ld: eh_throw.cc:(.text._ZL23__gxx_exception_cleanup19_Unwind_Reason_CodeP17_Unwind_Exception+0x24): undefined reference to `__gnu_cxx::__exchange_and_add(int volatile*, int)'
collect2: error: ld returned 1 exit status
------------------------>8--------------------
...and many more.
Interesting enough that was not seen earlier because "-matomic" used to be added in TARGET_{C|CXX}FLAGS via TARGET_ABI, but later "-matomic" was moved to ARCH_TOOLCHAIN_WRAPPER_OPTS, see
https://git.buildroot.org/buildroot/commit/?id=c568b4f37fa6d7f51e6d14d33d7eb75dfe26d7bf
and since then we started to see that new breakage which we now attempt to fix right where it hapens on GCC configuration.
In contrast ARC HS family has atomic ops enabled by default thus we never spotted that kind of problem for it.
More datails with analysis of what really happens under the hodd and how do error messages above are related to libs of GCC configuration could be found here: http://lists.busybox.net/pipermail/buildroot/2020-October/293614.html
--- package/gcc/gcc.mk | 8 ++++++++ 1 file changed, 8 insertions(+)
package/gcc/gcc.mk +8 -0
@@ -98,6 +98,14 @@ ifeq ($(BR2_ENABLE_DEBUG),y) GCC_COMMON_TARGET_CFLAGS += -Wno-error endif +# Make sure libgcc & libstdc++ always get built with -matomic on ARC700 +ifeq ($(GCC_TARGET_CPU),arc700) +ifeq ($(BR2_ARC_ATOMIC_EXT),y) +GCC_COMMON_TARGET_CFLAGS += -matomic +GCC_COMMON_TARGET_CXXFLAGS += -matomic +endif +endif + # Propagate options used for target software building to GCC target libs HOST_GCC_COMMON_CONF_ENV += CFLAGS_FOR_TARGET="$(GCC_COMMON_TARGET_CFLAGS)" HOST_GCC_COMMON_CONF_ENV += CXXFLAGS_FOR_TARGET="$(GCC_COMMON_TARGET_CXXFLAGS)"
Signature · 1 line
2.16.2
PATCH 1/1 package/gcc: Fix libs building on ARC700 with atomics
Quoted 19 lines
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Alexey" == Alexey Brodkin <[email protected]> writes:
As we many times by now discussed that - some ARC cores might not have atomic instructions implemented. Namely that's ARC700 w/o explicitly added atomics during design creation/configuration.
Because of that when GCC gets configured for ARC700, i.e. via "--with-cpu=arc700" atomic ops are assumed disabled.
Usually it's not a problem as we add "-matomics" in the wraper for building all packages if targets CPU has atomis (
BR2_ARC_ATOMIC_EXT).But when bulding target's binaries which are essential parts of the GCC itself we don't use the wrapper. Instead xgcc is being used. That way we lose that important part of system's configuration about atomics and:
1. Atomic ops won't be used where otherwise they could have been used.
2. Some configuration checks might end-up thinking there're no atomics
Quoted 4 lines
In particular (2) leads to pretty obscure failure on bulding of some packages which use C++, for example:
log4cplus: http://autobuild.buildroot.net/results/a7732fdb2ba526a114d9fb759814236c5332f8d7
------------------------> 8--------------------
Quoted 2 lines
./.libs/liblog4cplus.so: undefined reference to `std::__atomic_futex_unsigned_base::_M_futex_notify_all(unsigned int*)'
collect2: error: ld returned 1 exit status
------------------------> 8--------------------
Quoted 1 line
bitcoin: http://autobuild.buildroot.net/results/f73/f73d4c77e5fd6223abdbc83e344addcfc93227b8
------------------------> 8--------------------
Quoted 3 lines
(.text+0x110c): undefined reference to `std::__atomic_futex_unsigned_base::_M_futex_wait_until(unsigned int*, unsigned int, bool, std::chrono::duration<long long, std::ratio<1ll,
1ll> >, std::chrono::duration<long long, std::ratio<1ll, 1000000000ll>
Quoted 2 lines
Quoted 1 line
)'
collect2: error: ld returned 1 exit status
------------------------> 8--------------------
Quoted 1 line
apcupsd: http://autobuild.buildroot.net/results/7a2/7a2cc7a4ac2237c185817f75e55e05d144efd100
------------------------> 8--------------------
Quoted 5 lines
/tmp/instance-0/output-1/host/lib/gcc/arc-buildroot-linux-uclibc/9.3.1/../../../../arc-buildroot-linux-uclibc/bin/ld:
eh_throw.cc:(.text._ZL23__gxx_exception_cleanup19_Unwind_Reason_CodeP17_Unwind_Exception+0x24):
undefined reference to `__gnu_cxx::__exchange_and_add(int volatile*,
int)'
collect2: error: ld returned 1 exit status
------------------------> 8--------------------
Quoted 30 lines
...and many more.
Interesting enough that was not seen earlier because "-matomic" used to be added in TARGET_{C|CXX}FLAGS via
TARGET_ABI, but later "-matomic" was moved toARCH_TOOLCHAIN_WRAPPER_OPTS, see
https://git.buildroot.org/buildroot/commit/?id=c568b4f37fa6d7f51e6d14d33d7eb75dfe26d7bf
and since then we started to see that new breakage which we now attempt to fix right where it hapens on GCC configuration.In contrast ARC HS family has atomic ops enabled by default thus we never spotted that kind of problem for it.
More datails with analysis of what really happens under the hodd and how do error messages above are related to libs of GCC configuration could be found here: http://lists.busybox.net/pipermail/buildroot/2020-October/293614.html
Signed-off-by Alexey Brodkin <[email protected]>Cc Thomas Petazzoni <[email protected]>Cc Arnout Vandecappelle <[email protected]>Cc Peter Korsgaard <[email protected]>Cc Romain Naour <[email protected]>--- package/gcc/gcc.mk | 8 ++++++++ 1 file changed, 8 insertions(+)package/gcc/gcc.mk +0
-0
package/gcc/gcc.mk ifeq ($(BR2_ENABLE_DEBUG),y) · line 103
Quoted 6 lines
package/gcc/gcc.mk +3
-0@@ -98,6 +98,14 @@ ifeq ($(BR2_ENABLE_DEBUG),y) GCC_COMMON_TARGET_CFLAGS += -Wno-error endif +# Make sure libgcc & libstdc++ always get built with -matomic on ARC700 +ifeq ($(GCC_TARGET_CPU),arc700) +ifeq ($(BR2_ARC_ATOMIC_EXT),y)
NIT: These two conditions can be combined in a single ifeq:
ifeq ($(GCC_TARGET_CPU):$(BR2_ARC_ATOMIC_EXT),arc700:y)
Committed with that fixed, thanks.
Signature · 1 line
Bye, Peter Korsgaard
PATCH 1/1 package/gcc: Fix libs building on ARC700 with atomics
In reply to Alexey BrodkinQuoted 19 lines
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Alexey" == Alexey Brodkin <[email protected]> writes:
As we many times by now discussed that - some ARC cores might not have atomic instructions implemented. Namely that's ARC700 w/o explicitly added atomics during design creation/configuration.
Because of that when GCC gets configured for ARC700, i.e. via "--with-cpu=arc700" atomic ops are assumed disabled.
Usually it's not a problem as we add "-matomics" in the wraper for building all packages if targets CPU has atomis (
BR2_ARC_ATOMIC_EXT).But when bulding target's binaries which are essential parts of the GCC itself we don't use the wrapper. Instead xgcc is being used. That way we lose that important part of system's configuration about atomics and:
1. Atomic ops won't be used where otherwise they could have been used.
2. Some configuration checks might end-up thinking there're no atomics
Quoted 4 lines
In particular (2) leads to pretty obscure failure on bulding of some packages which use C++, for example:
log4cplus: http://autobuild.buildroot.net/results/a7732fdb2ba526a114d9fb759814236c5332f8d7
------------------------> 8--------------------
Quoted 2 lines
./.libs/liblog4cplus.so: undefined reference to `std::__atomic_futex_unsigned_base::_M_futex_notify_all(unsigned int*)'
collect2: error: ld returned 1 exit status
------------------------> 8--------------------
Quoted 1 line
bitcoin: http://autobuild.buildroot.net/results/f73/f73d4c77e5fd6223abdbc83e344addcfc93227b8
------------------------> 8--------------------
Quoted 3 lines
(.text+0x110c): undefined reference to `std::__atomic_futex_unsigned_base::_M_futex_wait_until(unsigned int*, unsigned int, bool, std::chrono::duration<long long, std::ratio<1ll,
1ll> >, std::chrono::duration<long long, std::ratio<1ll, 1000000000ll>
Quoted 2 lines
Quoted 1 line
)'
collect2: error: ld returned 1 exit status
------------------------> 8--------------------
Quoted 1 line
apcupsd: http://autobuild.buildroot.net/results/7a2/7a2cc7a4ac2237c185817f75e55e05d144efd100
------------------------> 8--------------------
Quoted 5 lines
/tmp/instance-0/output-1/host/lib/gcc/arc-buildroot-linux-uclibc/9.3.1/../../../../arc-buildroot-linux-uclibc/bin/ld:
eh_throw.cc:(.text._ZL23__gxx_exception_cleanup19_Unwind_Reason_CodeP17_Unwind_Exception+0x24):
undefined reference to `__gnu_cxx::__exchange_and_add(int volatile*,
int)'
collect2: error: ld returned 1 exit status
------------------------> 8--------------------
Quoted 16 lines
...and many more.
Interesting enough that was not seen earlier because "-matomic" used to be added in TARGET_{C|CXX}FLAGS via
TARGET_ABI, but later "-matomic" was moved toARCH_TOOLCHAIN_WRAPPER_OPTS, see
https://git.buildroot.org/buildroot/commit/?id=c568b4f37fa6d7f51e6d14d33d7eb75dfe26d7bf
and since then we started to see that new breakage which we now attempt to fix right where it hapens on GCC configuration.In contrast ARC HS family has atomic ops enabled by default thus we never spotted that kind of problem for it.
More datails with analysis of what really happens under the hodd and how do error messages above are related to libs of GCC configuration could be found here: http://lists.busybox.net/pipermail/buildroot/2020-October/293614.html
Quoted 5 lines
Signed-off-by Alexey Brodkin <[email protected]>Cc Thomas Petazzoni <[email protected]>Cc Arnout Vandecappelle <[email protected]>Cc Peter Korsgaard <[email protected]>Cc Romain Naour <[email protected]>
Committed to 2020.02.x and 2020.08.x, thanks.
Signature · 1 line
Bye, Peter Korsgaard