kconfig: qconf: drop Qt4 support
PATCH 1/3 kconfig: qconf: drop Qt4 support
It is possible to keep this compatible with both Qt4 and Qt5, but not worth the efforts any more; it would require us to test this on both of them, and prevent us from using new features in Qt5.
Qt5 was released in 2012, and now widely available.
Drop the Qt4 support.
---
scripts/kconfig/qconf-cfg.sh | 12 ++---------- 1 file changed, 2 insertions(+), 10 deletions(-)
scripts/kconfig/qconf-cfg.sh +2 -10
@@ -2,7 +2,6 @@ # SPDX-License-Identifier: GPL-2.0 PKG="Qt5Core Qt5Gui Qt5Widgets" -PKG2="QtCore QtGui" if [ -z "$(command -v pkg-config)" ]; then echo >&2 "*"
@@ -18,15 +17,8 @@ if pkg-config --exists $PKG; then exit 0 fi -if pkg-config --exists $PKG2; then - echo cflags=\"$(pkg-config --cflags $PKG2)\" - echo libs=\"$(pkg-config --libs $PKG2)\" - echo moc=\"$(pkg-config --variable=moc_location QtCore)\" - exit 0 -fi - echo >&2 "*" -echo >&2 "* Could not find Qt via pkg-config." -echo >&2 "* Please install either Qt 4.8 or 5.x. and make sure it's in PKG_CONFIG_PATH" +echo >&2 "* Could not find Qt5 via pkg-config." +echo >&2 "* Please install Qt5 and make sure it's in PKG_CONFIG_PATH" echo >&2 "*" exit 1
Signature · 1 line
2.25.1
PATCH 2/3 kconfig: qconf: use a variable to pass packages to pkg-config
The variable, PKG, is defined at the beginning of this script.
---
scripts/kconfig/qconf-cfg.sh | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
scripts/kconfig/qconf-cfg.sh +1 -1
@@ -11,7 +11,7 @@ if [ -z "$(command -v pkg-config)" ]; then fi if pkg-config --exists $PKG; then - echo cflags=\"-std=c++11 -fPIC $(pkg-config --cflags Qt5Core Qt5Gui Qt5Widgets)\" + echo cflags=\"-std=c++11 -fPIC $(pkg-config --cflags $PKG)\" echo libs=\"$(pkg-config --libs $PKG)\" echo moc=\"$(pkg-config --variable=host_bins Qt5Core)/moc\" exit 0
Signature · 1 line
2.25.1
PATCH 3/3 kconfig: qconf: convert to Qt5 new signal/slot connection syntax
In reply to Masahiro YamadaNow that the Qt4 support was dropped, we can use the new connection syntax supported by Qt5. It provides compile-time checking of the validity of the connection.
Previously, the connection between signals and slots were checked only run-time.
Commit d85de3399f97 ("kconfig: qconf: fix signal connection to invalid slots") fixed wrong slots.
This change makes it possible to catch such mistakes easily.
---
scripts/kconfig/qconf.cc | 136 ++++++++++++++++++++++----------------- 1 file changed, 78 insertions(+), 58 deletions(-)
scripts/kconfig/qconf.cc +78 -58
@@ -310,15 +310,16 @@ ConfigList::ConfigList(QWidget *parent, const char *name) setHeaderLabels(QStringList() << "Option" << "Name" << "Value"); - connect(this, SIGNAL(itemSelectionChanged(void)), - SLOT(updateSelection(void))); + connect(this, &ConfigList::itemSelectionChanged, + this, &ConfigList::updateSelection); if (name) { configSettings->beginGroup(name); showName = configSettings->value("/showName", false).toBool(); optMode = (enum optionMode)configSettings->value("/optionMode", 0).toInt(); configSettings->endGroup(); - connect(configApp, SIGNAL(aboutToQuit()), SLOT(saveSettings())); + connect(configApp, &QApplication::aboutToQuit, + this, &ConfigList::saveSettings); } showColumn(promptColIdx);
@@ -888,10 +889,10 @@ void ConfigList::contextMenuEvent(QContextMenuEvent *e) headerPopup = new QMenu(this); action = new QAction("Show Name", this); action->setCheckable(true); - connect(action, SIGNAL(toggled(bool)), - SLOT(setShowName(bool))); - connect(this, SIGNAL(showNameChanged(bool)), - action, SLOT(setChecked(bool))); + connect(action, &QAction::toggled, + this, &ConfigList::setShowName); + connect(this, &ConfigList::showNameChanged, + action, &QAction::setChecked); action->setChecked(showName); headerPopup->addAction(action); }
@@ -936,15 +937,18 @@ ConfigInfoView::ConfigInfoView(QWidget* parent, const char *name) configSettings->beginGroup(objectName()); setShowDebug(configSettings->value("/showDebug", false).toBool()); configSettings->endGroup(); - connect(configApp, SIGNAL(aboutToQuit()), SLOT(saveSettings())); + connect(configApp, &QApplication::aboutToQuit, + this, &ConfigInfoView::saveSettings); } contextMenu = createStandardContextMenu(); QAction *action = new QAction("Show Debug Info", contextMenu); action->setCheckable(true); - connect(action, SIGNAL(toggled(bool)), SLOT(setShowDebug(bool))); - connect(this, SIGNAL(showDebugChanged(bool)), action, SLOT(setChecked(bool))); + connect(action, &QAction::toggled, + this, &ConfigInfoView::setShowDebug); + connect(this, &ConfigInfoView::showDebugChanged, + action, &QAction::setChecked); action->setChecked(showDebug()); contextMenu->addSeparator(); contextMenu->addAction(action);
@@ -1231,11 +1235,13 @@ ConfigSearchWindow::ConfigSearchWindow(ConfigMainWindow *parent) layout2->setSpacing(6); layout2->addWidget(new QLabel("Find:", this)); editField = new QLineEdit(this); - connect(editField, SIGNAL(returnPressed()), SLOT(search())); + connect(editField, &QLineEdit::returnPressed, + this, &ConfigSearchWindow::search); layout2->addWidget(editField); searchButton = new QPushButton("Search", this); searchButton->setAutoDefault(false); - connect(searchButton, SIGNAL(clicked()), SLOT(search())); + connect(searchButton, &QPushButton::clicked, + this, &ConfigSearchWindow::search); layout2->addWidget(searchButton); layout1->addLayout(layout2);
@@ -1244,10 +1250,10 @@ ConfigSearchWindow::ConfigSearchWindow(ConfigMainWindow *parent) list = new ConfigList(split, "search"); list->mode = listMode; info = new ConfigInfoView(split, "search"); - connect(list, SIGNAL(menuChanged(struct menu *)), - info, SLOT(setInfo(struct menu *))); - connect(list, SIGNAL(menuChanged(struct menu *)), - parent, SLOT(setMenuLink(struct menu *))); + connect(list, &ConfigList::menuChanged, + info, &ConfigInfoView::setInfo); + connect(list, &ConfigList::menuChanged, + parent, &ConfigMainWindow::setMenuLink); layout1->addWidget(split);
@@ -1267,7 +1273,8 @@ ConfigSearchWindow::ConfigSearchWindow(ConfigMainWindow *parent) if (ok) split->setSizes(sizes); configSettings->endGroup(); - connect(configApp, SIGNAL(aboutToQuit()), SLOT(saveSettings())); + connect(configApp, &QApplication::aboutToQuit, + this, &ConfigSearchWindow::saveSettings); } void ConfigSearchWindow::saveSettings(void)
@@ -1367,19 +1374,23 @@ ConfigMainWindow::ConfigMainWindow(void) configList->setFocus(); backAction = new QAction(QPixmap(xpm_back), "Back", this); - connect(backAction, SIGNAL(triggered(bool)), SLOT(goBack())); + connect(backAction, &QAction::triggered, + this, &ConfigMainWindow::goBack); QAction *quitAction = new QAction("&Quit", this); quitAction->setShortcut(Qt::CTRL + Qt::Key_Q); - connect(quitAction, SIGNAL(triggered(bool)), SLOT(close())); + connect(quitAction, &QAction::triggered, + this, &ConfigMainWindow::close); QAction *loadAction = new QAction(QPixmap(xpm_load), "&Load", this); loadAction->setShortcut(Qt::CTRL + Qt::Key_L); - connect(loadAction, SIGNAL(triggered(bool)), SLOT(loadConfig())); + connect(loadAction, &QAction::triggered, + this, &ConfigMainWindow::loadConfig); saveAction = new QAction(QPixmap(xpm_save), "&Save", this); saveAction->setShortcut(Qt::CTRL + Qt::Key_S); - connect(saveAction, SIGNAL(triggered(bool)), SLOT(saveConfig())); + connect(saveAction, &QAction::triggered, + this, &ConfigMainWindow::saveConfig); conf_set_changed_callback(conf_changed);
@@ -1388,31 +1399,37 @@ ConfigMainWindow::ConfigMainWindow(void) configname = xstrdup(conf_get_configname()); QAction *saveAsAction = new QAction("Save &As...", this); - connect(saveAsAction, SIGNAL(triggered(bool)), SLOT(saveConfigAs())); + connect(saveAsAction, &QAction::triggered, + this, &ConfigMainWindow::saveConfigAs); QAction *searchAction = new QAction("&Find", this); searchAction->setShortcut(Qt::CTRL + Qt::Key_F); - connect(searchAction, SIGNAL(triggered(bool)), SLOT(searchConfig())); + connect(searchAction, &QAction::triggered, + this, &ConfigMainWindow::searchConfig); singleViewAction = new QAction(QPixmap(xpm_single_view), "Single View", this); singleViewAction->setCheckable(true); - connect(singleViewAction, SIGNAL(triggered(bool)), SLOT(showSingleView())); + connect(singleViewAction, &QAction::triggered, + this, &ConfigMainWindow::showSingleView); splitViewAction = new QAction(QPixmap(xpm_split_view), "Split View", this); splitViewAction->setCheckable(true); - connect(splitViewAction, SIGNAL(triggered(bool)), SLOT(showSplitView())); + connect(splitViewAction, &QAction::triggered, + this, &ConfigMainWindow::showSplitView); fullViewAction = new QAction(QPixmap(xpm_tree_view), "Full View", this); fullViewAction->setCheckable(true); - connect(fullViewAction, SIGNAL(triggered(bool)), SLOT(showFullView())); + connect(fullViewAction, &QAction::triggered, + this, &ConfigMainWindow::showFullView); QAction *showNameAction = new QAction("Show Name", this); showNameAction->setCheckable(true); - connect(showNameAction, SIGNAL(toggled(bool)), configList, SLOT(setShowName(bool))); + connect(showNameAction, &QAction::toggled, + configList, &ConfigList::setShowName); showNameAction->setChecked(configList->showName); QActionGroup *optGroup = new QActionGroup(this); optGroup->setExclusive(true); - connect(optGroup, SIGNAL(triggered(QAction*)), configList, - SLOT(setOptionMode(QAction *))); - connect(optGroup, SIGNAL(triggered(QAction *)), menuList, - SLOT(setOptionMode(QAction *))); + connect(optGroup, &QActionGroup::triggered, + configList, &ConfigList::setOptionMode); + connect(optGroup, &QActionGroup::triggered, + menuList, &ConfigList::setOptionMode); ConfigList::showNormalAction = new QAction("Show Normal Options", optGroup); ConfigList::showNormalAction->setCheckable(true);
@@ -1423,13 +1440,16 @@ ConfigMainWindow::ConfigMainWindow(void) QAction *showDebugAction = new QAction("Show Debug Info", this); showDebugAction->setCheckable(true); - connect(showDebugAction, SIGNAL(toggled(bool)), helpText, SLOT(setShowDebug(bool))); + connect(showDebugAction, &QAction::toggled, + helpText, &ConfigInfoView::setShowDebug); showDebugAction->setChecked(helpText->showDebug()); QAction *showIntroAction = new QAction("Introduction", this); - connect(showIntroAction, SIGNAL(triggered(bool)), SLOT(showIntro())); + connect(showIntroAction, &QAction::triggered, + this, &ConfigMainWindow::showIntro); QAction *showAboutAction = new QAction("About", this); - connect(showAboutAction, SIGNAL(triggered(bool)), SLOT(showAbout())); + connect(showAboutAction, &QAction::triggered, + this, &ConfigMainWindow::showAbout); // init tool bar QToolBar *toolBar = addToolBar("Tools");
@@ -1467,30 +1487,30 @@ ConfigMainWindow::ConfigMainWindow(void) menu->addAction(showIntroAction); menu->addAction(showAboutAction); - connect (helpText, SIGNAL (anchorClicked (const QUrl &)), - helpText, SLOT (clicked (const QUrl &)) ); - - connect(configList, SIGNAL(menuChanged(struct menu *)), - helpText, SLOT(setInfo(struct menu *))); - connect(configList, SIGNAL(menuSelected(struct menu *)), - SLOT(changeMenu(struct menu *))); - connect(configList, SIGNAL(itemSelected(struct menu *)), - SLOT(changeItens(struct menu *))); - connect(configList, SIGNAL(parentSelected()), - SLOT(goBack())); - connect(menuList, SIGNAL(menuChanged(struct menu *)), - helpText, SLOT(setInfo(struct menu *))); - connect(menuList, SIGNAL(menuSelected(struct menu *)), - SLOT(changeMenu(struct menu *))); - - connect(configList, SIGNAL(gotFocus(struct menu *)), - helpText, SLOT(setInfo(struct menu *))); - connect(menuList, SIGNAL(gotFocus(struct menu *)), - helpText, SLOT(setInfo(struct menu *))); - connect(menuList, SIGNAL(gotFocus(struct menu *)), - SLOT(listFocusChanged(void))); - connect(helpText, SIGNAL(menuSelected(struct menu *)), - SLOT(setMenuLink(struct menu *))); + connect(helpText, &ConfigInfoView::anchorClicked, + helpText, &ConfigInfoView::clicked); + + connect(configList, &ConfigList::menuChanged, + helpText, &ConfigInfoView::setInfo); + connect(configList, &ConfigList::menuSelected, + this, &ConfigMainWindow::changeMenu); + connect(configList, &ConfigList::itemSelected, + this, &ConfigMainWindow::changeItens); + connect(configList, &ConfigList::parentSelected, + this, &ConfigMainWindow::goBack); + connect(menuList, &ConfigList::menuChanged, + helpText, &ConfigInfoView::setInfo); + connect(menuList, &ConfigList::menuSelected, + this, &ConfigMainWindow::changeMenu); + + connect(configList, &ConfigList::gotFocus, + helpText, &ConfigInfoView::setInfo); + connect(menuList, &ConfigList::gotFocus, + helpText, &ConfigInfoView::setInfo); + connect(menuList, &ConfigList::gotFocus, + this, &ConfigMainWindow::listFocusChanged); + connect(helpText, &ConfigInfoView::menuSelected, + this, &ConfigMainWindow::setMenuLink); QString listMode = configSettings->value("/listMode", "symbol").toString(); if (listMode == "single")
Signature · 1 line
2.25.1
Re: [PATCH 3/3] kconfig: qconf: convert to Qt5 new signal/slot connection syntax
Quoted 7 lines · Masahiro Yamada
Now that the Qt4 support was dropped, we can use the new connection syntax supported by Qt5. It provides compile-time checking of the validity of the connection.
Previously, the connection between signals and slots were checked only run-time.
Quoted 6 lines
Commit
d85de3399f97("kconfig: qconf: fix signal connection to invalid slots") fixed wrong slots.This change makes it possible to catch such mistakes easily.
Signed-off-by Masahiro Yamada <[email protected]>