PCI: check also dynamic IDs for duplicate in new_id_store()
PATCH v2 1/1 PCI: check also dynamic IDs for duplicate in new_id_store()
When a device ID data is writen to /sys/bus/pci/drivers/.../new_id, only static ID table is checked for duplicate and multiple dynamic ID entries of same kind are allowed to exist in a dynamic linked list.
Fix it by calling pci_match_device() which checks both dynamic and static IDs.
After fix, it shows below result which is expected.
echo "1af4:1000" > /sys/bus/pci/drivers/vfio-pci/new_id echo "1af4:1000" > /sys/bus/pci/drivers/vfio-pci/new_id -bash: echo: write error: File exists
Drop the static specifier and add a prototype to avoid build error.
---
v2: revert the export of pci_match_device() per Christoph
combind PATCH1 and PATCH2 into one.
drivers/pci/pci-driver.c | 4 ++-- include/linux/pci.h | 2 ++ 2 files changed, 4 insertions(+), 2 deletions(-)
drivers/pci/pci-driver.c +2 -2
@@ -125,7 +125,7 @@ static ssize_t new_id_store(struct device_driver *driver, const char *buf, pdev->subsystem_device = subdevice; pdev->class = class; -if (pci_match_id (pdrv->id_table, pdev)) +if (pci_match_device (pdrv, pdev)) retval = -EEXIST ;kfree (pdev);
@@ -250,7 +250,7 @@ const struct pci_device_id *pci_match_id(const struct pci_device_id *ids,* system is in its list of supported devices. Returns the matching * pci_device_id structure or %NULL if there is no match. */ -static const struct pci_device_id *pci_match_device (struct pci_driver *drv, +const struct pci_device_id *pci_match_device (struct pci_driver *drv,struct pci_dev *dev) {struct pci_dynid *dynid;
include/linux/pci.h +2 -0
@@ -1409,6 +1409,8 @@ int pci_add_dynid(struct pci_driver *drv, unsigned long driver_data);const struct pci_device_id *pci_match_id (const struct pci_device_id *ids,struct pci_dev *dev); +const struct pci_device_id *pci_match_device (struct pci_driver *drv, +struct pci_dev *dev);int pci_scan_bridge (struct pci_bus *bus,struct pci_dev *dev,int max,int pass);
Signature · 1 line
1.8.3.1
Quoted 9 lines · Zhenzhong Duan
When a device ID data is writen to
/sys/bus/pci/drivers/.../new_id, only static ID table is checked for duplicate and multiple dynamic ID entries of same kind are allowed to exist in a dynamic linked list.Fix it by calling
pci_match_device()which checks both dynamic and static IDs.After fix, it shows below result which is expected.
Quoted 7 lines
echo "1af4:1000" >
/sys/bus/pci/drivers/vfio-pci/new_idecho "1af4:1000" >/sys/bus/pci/drivers/vfio-pci/new_id-bash: echo: write error: File existsDrop the static specifier and add a prototype to avoid build error.
Signed-off-by Zhenzhong Duan <[email protected]>
Looks good,
Hi Bjorn,
This patch got reviewed-by, could you kindly check if it can be upstreamed? Thanks very much.
Zhenzhong
Quoted 22 lines · Christoph Hellwig
Quoted 9 lines · Zhenzhong Duan
When a device ID data is writen to
/sys/bus/pci/drivers/.../new_id, only static ID table is checked for duplicate and multiple dynamic ID entries of same kind are allowed to exist in a dynamic linked list.Fix it by calling
pci_match_device()which checks both dynamic and static IDs.After fix, it shows below result which is expected.
Quoted 7 lines
echo "1af4:1000" >
/sys/bus/pci/drivers/vfio-pci/new_idecho "1af4:1000" >/sys/bus/pci/drivers/vfio-pci/new_id-bash: echo: write error: File existsDrop the static specifier and add a prototype to avoid build error.
Signed-off-by Zhenzhong Duan <[email protected]>Looks good,
Reviewed-by Christoph Hellwig <[email protected]>
[+cc Alex, Cornelia in case VFIO cares about new_id/remove_id semantics]
Quoted 3 lines · Zhenzhong Duan
When a device ID data is writen to
/sys/bus/pci/drivers/.../new_id, only static ID table is checked for duplicate and multiple dynamic ID entries of same kind are allowed to exist in a dynamic linked list.
This doesn't quite say what the problem is.
I see that currently new_id_store() uses pci_match_id() to see if the new device ID is in the static id_table, so adding the same ID twice adds multiple entries to the dynids list. That does seem wrong, and I think we should fix it.
But I would like to clarify this commit log so we know whether the current behavior causes user-visible broken behavior. The dynids list is mostly used by pci_match_device(), and it looks like duplicate entries shouldn't cause it a problem.
I guess remove_id_store() will only remove one of the duplicate entries, so if we add an ID several times, we would have to remove it the same number of times before it's completely gone.
Quoted 10 lines
Fix it by calling
pci_match_device()which checks both dynamic and static IDs.After fix, it shows below result which is expected.
echo "1af4:1000" >
/sys/bus/pci/drivers/vfio-pci/new_idecho "1af4:1000" >/sys/bus/pci/drivers/vfio-pci/new_id-bash: echo: write error: File existsDrop the static specifier and add a prototype to avoid build error.
I don't get this part. You added a prototype in include/linux/pci.h, which means you expect callers outside drivers/pci. But there aren't any.
In fact, you're only adding a call in the same file where pci_match_device() is defined. The usual way to resolve that is to move the pci_match_device() definition before the call, so no forward declaration is needed and the function can remain static.
I think pci_match_id() and pci_match_device() should both be moved so they remain together. It would be nice if the move itself were a no-op patch separate from the one that changes new_id_store().
Quoted 47 lines
Signed-off-by Zhenzhong Duan <[email protected]>---
v2: revert the export ofpci_match_device()per Christoph
combind PATCH1 and PATCH2 into one.drivers/pci/pci-driver.c | 4 ++-- include/linux/pci.h | 2 ++ 2 files changed, 4 insertions(+), 2 deletions(-)drivers/pci/pci-driver.c +2
-2@@ -125,7 +125,7 @@ static ssize_t new_id_store(struct device_driver *driver, const char *buf, pdev->subsystem_device = subdevice; pdev->class = class; -if (pci_match_id (pdrv->id_table, pdev)) +if (pci_match_device (pdrv, pdev)) retval = -EEXIST ;kfree (pdev);@@ -250,7 +250,7 @@ const struct pci_device_id *pci_match_id(const struct pci_device_id *ids,* system is in its list of supported devices. Returns the matching * pci_device_id structure or %NULL if there is no match. */ -static const struct pci_device_id *pci_match_device (struct pci_driver *drv, +const struct pci_device_id *pci_match_device (struct pci_driver *drv,struct pci_dev *dev) {struct pci_dynid *dynid;include/linux/pci.h +2
-0@@ -1409,6 +1409,8 @@ int pci_add_dynid(struct pci_driver *drv, unsigned long driver_data);const struct pci_device_id *pci_match_id (const struct pci_device_id *ids,struct pci_dev *dev); +const struct pci_device_id *pci_match_device (struct pci_driver *drv, +struct pci_dev *dev);int pci_scan_bridge (struct pci_bus *bus,struct pci_dev *dev,int max,int pass);Signature · 1 line
1.8.3.1
Hi Bjorn,
Quoted 16 lines · Bjorn Helgaas
[+cc Alex, Cornelia in case VFIO cares about new_id/remove_id semantics]
Quoted 3 lines · Zhenzhong Duan
When a device ID data is writen to
/sys/bus/pci/drivers/.../new_id, only static ID table is checked for duplicate and multiple dynamic ID entries of same kind are allowed to exist in a dynamic linked list.This doesn't quite say what the problem is.
I see that currently
new_id_store()usespci_match_id()to see if the new device ID is in the staticid_table, so adding the same ID twice adds multiple entries to the dynids list. That does seem wrong, and I think we should fix it.
Quoted 8 lines
But I would like to clarify this commit log so we know whether the current behavior causes user-visible broken behavior. The dynids list is mostly used by
pci_match_device(), and it looks like duplicate entries shouldn't cause it a problem.I guess
remove_id_store()will only remove one of the duplicate entries, so if we add an ID several times, we would have to remove it the same number of times before it's completely gone.
Current behavior doesn't cause user-visible broken behavior, only not user friendly. One has to remove an ID at least twice to ensure it's really removed if he doesn't know how many times it has been added before.
Quoted 16 lines
Quoted 11 lines
Fix it by calling
pci_match_device()which checks both dynamic and static IDs.After fix, it shows below result which is expected.
echo "1af4:1000" >
/sys/bus/pci/drivers/vfio-pci/new_idecho "1af4:1000" >/sys/bus/pci/drivers/vfio-pci/new_id-bash: echo: write error: File existsDrop the static specifier and add a prototype to avoid build error.
I don't get this part. You added a prototype in
include/linux/pci.h, which means you expect callers outsidedrivers/pci. But there aren't any.
Quoted 8 lines
In fact, you're only adding a call in the same file where
pci_match_device()is defined. The usual way to resolve that is to move thepci_match_device()definition before the call, so no forward declaration is needed and the function can remain static.I think
pci_match_id()andpci_match_device()should both be moved so they remain together. It would be nice if the move itself were a no-op patch separate from the one that changesnew_id_store().
Yes, that's better, will do, thanks for your suggestions.
Zhenzhong