configs/arcturus_ucp1020: Enabling gcc-8.x & support for BR2_powerpc_8548 cores
PATCH 1/1 configs/arcturus_ucp1020: Enabling gcc-8.x & support for BR2_powerpc_8548 cores
Enabling GCC-8.x with support for BR2_powerpc_8548 cores
The GCC-7.x compiler series was the last to support BR2_powerpc_SPE CPUs within GCC.? After GCC-7.x support was removed as a default in buildroot, some boards, including the arcturus_ucp1020_defconfig and freescale_p1025twr_defconfig will fail to compile.
The GCC-8.x compiler series continues to support powerpc_8548 CPU cores, but only as an --enable-obsoleted instruction set.? This patch is enables the use of GCC-8.x and asserts the required option to enable the powerpc_8548 instruction set for the? arcturus_ucp1020 platform.
This Patch passes compilation and run tests with the arcturus/ppc-ucp1020 board.? This patch should address a noted job failure on GitLab CI
https://gitlab.com/buildroot.org/buildroot/-/jobs/779210821
---
?configs/arcturus_ucp1020_defconfig | 1 +
?package/gcc/Config.in.host???????? | 2 +-
?2 files changed, 2 insertions(+), 1 deletion(-)
(quoted diff) +0 -0
b/configs/arcturus_ucp1020_defconfig
index 8b90f44750..4e4a84f9e9 100644
configs/arcturus_ucp1020_defconfig +0 -0
@@ -6,6 +6,7 @@ BR2_powerpc_8548=y
?BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_4=y
?
?# System settings +BR2_EXTRA_GCC_CONFIG_OPTIONS="--enable-obsolete" ?BR2_TARGET_GENERIC_HOSTNAME="UCP1020" ?BR2_TARGET_GENERIC_ISSUE="Welcome to Arcturus uCP1020 System on Module" ?BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"
package/gcc/Config.in.host +0 -0
@@ -27,7 +27,7 @@ config BR2_GCC_VERSION_8_X
??????? depends on !BR2_or1k
??????? # powerpc spe support has been deprecated since gcc 8.x. ??????? # https://gcc.gnu.org/ml/gcc/2018-04/msg00102.html
-?????? depends on !BR2_powerpc_SPE
+?????? depends on !BR2_powerpc_SPE || BR2_powerpc_8548 ??????? select BR2_TOOLCHAIN_GCC_AT_LEAST_8
?
?config BR2_GCC_VERSION_9_X
Signature · 1 line
2.26.2
PATCH 1/1 configs/arcturus_ucp1020: Enabling gcc-8.x & support for BR2_powerpc_8548 cores
Hello Michael,
Quoted 18 lines · On Thu, 15 Oct 2020 10:48:33 -0400 Michael Durrant…
configs/arcturus_ucp1020_defconfig +0
-0@@ -6,6 +6,7 @@ BR2_powerpc_8548=y?BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_4=y
?
?# System settings +BR2_EXTRA_GCC_CONFIG_OPTIONS="--enable-obsolete" ?BR2_TARGET_GENERIC_HOSTNAME="UCP1020" ?BR2_TARGET_GENERIC_ISSUE="Welcome to Arcturus uCP1020 System on Module" ?BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"package/gcc/Config.in.host +0
-0@@ -27,7 +27,7 @@ config BR2_GCC_VERSION_8_X
Quoted 8 lines
??????? depends on !BR2_or1k
??????? # powerpc spe support has been deprecated since gcc 8.x. ??????? # https://gcc.gnu.org/ml/gcc/2018-04/msg00102.html
-?????? depends on !BR2_powerpc_SPE
+?????? depends on !BR2_powerpc_SPE ||BR2_powerpc_8548??????? selectBR2_TOOLCHAIN_GCC_AT_LEAST_8
?
?configBR2_GCC_VERSION_9_X
Thanks for proposing a fix, but your fix is not correct: it will only work for your own defconfig. Your fix makes gcc 8.x selectable again for BR2_powerpc_8548, but only if building your defconfig will --enable-obsolete be passed.
So instead, I would suggest to re-enable gcc 8.x for BR2_powerpc_SPE, and have package/gcc/gcc.mk pass --enable-obsolete when on a BR2_powerpc_SPE platform.
Could you have a look at doing this ?
Also, what is your plan to support this platform moving forward ? gcc upstream has dropped SPE support entirely as of gcc 9.x.
Best regards,
Thomas
Signature · 3 lines
Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com
PATCH v2 1/1 configs/arcturus_ucp1020: Enabling gcc-8.x & support for BR2_powerpc_8548 cores
In reply to Michael DurrantEnabling GCC-8.x with support for BR2_powerpc_8548 cores
The GCC-7.x compiler series was the last to support BR2_powerpc_SPE CPUs within GCC.? After GCC-7.x support was removed as a default in buildroot, some boards, including the arcturus_ucp1020_defconfig and freescale_p1025twr_defconfig will fail to compile.
The GCC-8.x compiler series continues to support powerpc_8548 CPU cores, but only as an --enable-obsoleted instruction set. This patch is enables the use of GCC-8.x and asserts the required option to enable the powerpc_8548 instruction set for the arcturus_ucp1020 platform.
This Patch passes compilation and run tests with the arcturus/ppc-ucp1020 board.? This patch should address a noted job failure on GitLab CI
https://gitlab.com/buildroot.org/buildroot/-/jobs/779210821
---
Changes v1 -> v2:
Changes patch to address a common architecture instead of a specific platform as recommended by Thomas Petazzoni.
---
?package/gcc/Config.in.host | 2 +-
?package/gcc/gcc.mk???????? | 4 ++++
?2 files changed, 5 insertions(+), 1 deletion(-)
package/gcc/Config.in.host +0 -0
@@ -27,7 +27,7 @@ config BR2_GCC_VERSION_8_X
??????? depends on !BR2_or1k
??????? # powerpc spe support has been deprecated since gcc 8.x. ??????? # https://gcc.gnu.org/ml/gcc/2018-04/msg00102.html
-?????? depends on !BR2_powerpc_SPE
+?????? depends on !BR2_powerpc_SPE || BR2_powerpc_8548 ??????? select BR2_TOOLCHAIN_GCC_AT_LEAST_8
?config BR2_GCC_VERSION_9_X
package/gcc/gcc.mk +0 -0
@@ -219,6 +219,10 @@ ifeq ($(BR2_powerpc_SPE),y)
?HOST_GCC_COMMON_CONF_OPTS += \
??????? --enable-e500_double \
??????? --with-long-double-128
+ifeq ($(BR2_powerpc_8548),y)
+HOST_GCC_COMMON_CONF_OPTS += \
+?????? --enable-obsolete
+endif
?endif
?# Set default to Secure-PLT to prevent run-time
Signature · 1 line
2.26.2
PATCH v2 1/1 configs/arcturus_ucp1020: Enabling gcc-8.x & support for BR2_powerpc_8548 cores
Hello,
Thanks for following up quickly with a new proposal!
The commit title is incorrect: it is not related to configs/arcturus_ucp1020.
Quoted 9 lines · On Mon, 26 Oct 2020 11:52:27 -0400 Michael Durrant…
?package/gcc/Config.in.host | 2 +-
?package/gcc/gcc.mk???????? | 4 ++++
?2 files changed, 5 insertions(+), 1 deletion(-)package/gcc/Config.in.host +0
-0@@ -27,7 +27,7 @@ config BR2_GCC_VERSION_8_X
Quoted 5 lines
??????? depends on !BR2_or1k
??????? # powerpc spe support has been deprecated since gcc 8.x. ??????? # https://gcc.gnu.org/ml/gcc/2018-04/msg00102.html
-?????? depends on !BR2_powerpc_SPE
+?????? depends on !BR2_powerpc_SPE ||BR2_powerpc_8548
Is there a reason here to make this conditional on BR2_powerpc_8548 and not just drop the !BR2_powerpc_SPE dependency ?
package/gcc/gcc.mk
Quoted 13 lines
?config
BR2_GCC_VERSION_9_Xpackage/gcc/gcc.mk +0
-0@@ -219,6 +219,10 @@ ifeq ($(BR2_powerpc_SPE),y) ?HOST_GCC_COMMON_CONF_OPTS += \ ??????? --enable-e500_double \??????? --with-long-double-128
package/gcc/gcc.mk +4
-0+ifeq ($(BR2_powerpc_8548),y) +HOST_GCC_COMMON_CONF_OPTS += \ +?????? --enable-obsolete +endif
Same question.
Thanks!
Thomas
Signature · 3 lines
Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com
PATCH 1/1 package/gcc: Enabling gcc-8.x support for, BR2_powerpc_8548 cores
In reply to Michael Durrantpackage/gcc: Enabling gcc-8.x support for? BR2_powerpc_8548 cores
The GCC-7.x compiler series was the last to support BR2_powerpc_SPE CPUs within GCC.? After GCC-7.x support was removed as a default in buildroot, some boards, including the arcturus_ucp1020_defconfig and freescale_p1025twr_defconfig will fail to compile.
The GCC-8.x compiler series continues to support powerpc_spe CPU cores, but only as an --enable-obsoleted instruction set. This patch enables the use of GCC-8.x and asserts the required option to enable the powerpc_spe instruction set.
This Patch passes compilation and run tests with the arcturus/ppc-ucp1020? board.
This patch should address a noted job failure on GitLab CI
https://gitlab.com/buildroot.org/buildroot/-/jobs/805461732
---
?package/gcc/Config.in.host | 2 +-
?package/gcc/gcc.mk???????? | 1 +
?2 files changed, 2 insertions(+), 1 deletion(-)
package/gcc/Config.in.host +0 -0
@@ -27,7 +27,7 @@ config BR2_GCC_VERSION_8_X
??????? depends on !BR2_or1k
??????? # powerpc spe support has been deprecated since gcc 8.x. ??????? # https://gcc.gnu.org/ml/gcc/2018-04/msg00102.html
-?????? depends on !BR2_powerpc_SPE
+?????? # it can still be built with --enable-obsolete ??????? select BR2_TOOLCHAIN_GCC_AT_LEAST_8
?config BR2_GCC_VERSION_9_X
package/gcc/gcc.mk +0 -0
@@ -217,6 +217,7 @@ endif
?# Enable proper double/long double for SPE ABI
?ifeq ($(BR2_powerpc_SPE),y)
?HOST_GCC_COMMON_CONF_OPTS += \
+?????? --enable-obsolete \
??????? --enable-e500_double \
??????? --with-long-double-128
?endif
Signature · 1 line
2.26.2