Skip to contentSkip to conversation

powerpc/powernv/smp: Fix spurious DBG() warning

PATCH In review Sasha Levin 2 participants 133 messages Oct 26, 2020 – Oct 27, 2020

Subsystems (39)
lore
Share & tools
lore

Sasha Levin

author maintainer
#0 lore raw

PATCH 1/132 powerpc/powernv/smp: Fix spurious DBG() warning

From: Oliver O'Halloran <[email protected]>

[ Upstream commit f6bac19cf65c5be21d14a0c9684c8f560f2096dd ]

When building with W=1 we get the following warning:

arch/powerpc/platforms/powernv/smp.c: In function ‘pnv_smp_cpu_kill_self’:
arch/powerpc/platforms/powernv/smp.c:276:16: error: suggest braces around
empty body in an ‘if’ statement [-Werror=empty-body]
276 | cpu, srr1);
| ^
cc1: all warnings being treated as errors

The full context is this block:

if (srr1 && !generic_check_cpu_restart(cpu))
DBG("CPU%d Unexpected exit while offline srr1=%lx!\n",
cpu, srr1);

When building with DEBUG undefined DBG() expands to nothing and GCC emits the warning due to the lack of braces around an empty statement.

---
 arch/powerpc/platforms/powernv/smp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/powerpc/platforms/powernv/smp.c +1 -1
index b2ba3e95bda73..bbf361f23ae86 100644
@@ -43,7 +43,7 @@
 #include <asm/udbg.h>
 #define DBG(fmt...) udbg_printf(fmt)
 #else
-#define DBG(fmt...)
+#define DBG(fmt...) do { } while (0)
 #endif
 
 static void pnv_smp_setup_cpu(int cpu)
Signature · 1 line
2.25.1
author maintainer
#1 lore raw

PATCH 2/132 RDMA/core: Change how failing destroy is handled during uobj abort

From: Jason Gunthorpe <[email protected]>

[ Upstream commit f553246f7f794675da1794ae7ee07d1f35e561ae ]

Currently it triggers a WARN_ON and then goes ahead and destroys the uobject anyhow, leaking any driver memory.

The only place that leaks driver memory should be during FD close() in uverbs_destroy_ufile_hw().

Drivers are only allowed to fail destroy uobjects if they guarantee destroy will eventually succeed. uverbs_destroy_ufile_hw() provides the loop to give the driver that chance.

---
 drivers/infiniband/core/rdma_core.c | 30 ++++++++++++++---------------
 include/rdma/ib_verbs.h             |  5 -----
 2 files changed, 15 insertions(+), 20 deletions(-)
drivers/infiniband/core/rdma_core.c +15 -15
index 6d3ed7c6e19eb..3962da54ffbf4 100644
@@ -130,17 +130,6 @@ static int uverbs_destroy_uobject(struct ib_uobject *uobj,
 	lockdep_assert_held(&ufile->hw_destroy_rwsem);
 	assert_uverbs_usecnt(uobj, UVERBS_LOOKUP_WRITE);
 
-	if (reason == RDMA_REMOVE_ABORT_HWOBJ) {
-		reason = RDMA_REMOVE_ABORT;
-		ret = uobj->uapi_object->type_class->destroy_hw(uobj, reason,
-								attrs);
-		/*
-		 * Drivers are not permitted to ignore RDMA_REMOVE_ABORT, see
-		 * ib_is_destroy_retryable, cleanup_retryable == false here.
-		 */
-		WARN_ON(ret);
-	}
-
 	if (reason == RDMA_REMOVE_ABORT) {
 		WARN_ON(!list_empty(&uobj->list));
 		WARN_ON(!uobj->context);
@@ -674,11 +663,22 @@ void rdma_alloc_abort_uobject(struct ib_uobject *uobj,
 			      bool hw_obj_valid)
 {
 	struct ib_uverbs_file *ufile = uobj->ufile;
+	int ret;
+
+	if (hw_obj_valid) {
+		ret = uobj->uapi_object->type_class->destroy_hw(
+			uobj, RDMA_REMOVE_ABORT, attrs);
+		/*
+		 * If the driver couldn't destroy the object then go ahead and
+		 * commit it. Leaking objects that can't be destroyed is only
+		 * done during FD close after the driver has a few more tries to
+		 * destroy it.
+		 */
+		if (WARN_ON(ret))
+			return rdma_alloc_commit_uobject(uobj, attrs);
+	}
 
-	uverbs_destroy_uobject(uobj,
-			       hw_obj_valid ? RDMA_REMOVE_ABORT_HWOBJ :
-					      RDMA_REMOVE_ABORT,
-			       attrs);
+	uverbs_destroy_uobject(uobj, RDMA_REMOVE_ABORT, attrs);
 
 	/* Matches the down_read in rdma_alloc_begin_uobject */
 	up_read(&ufile->hw_destroy_rwsem);
include/rdma/ib_verbs.h +0 -5
index ef2f3986c4933..f1a072cc9fc0e 100644
@@ -1489,11 +1489,6 @@ enum rdma_remove_reason {
 	RDMA_REMOVE_DRIVER_REMOVE,
 	/* uobj is being cleaned-up before being committed */
 	RDMA_REMOVE_ABORT,
-	/*
-	 * uobj has been fully created, with the uobj->object set, but is being
-	 * cleaned up before being comitted
-	 */
-	RDMA_REMOVE_ABORT_HWOBJ,
 };
 
 struct ib_rdmacg_object {
Signature · 1 line
2.25.1
author maintainer
#2 lore raw

PATCH 3/132 f2fs: allocate proper size memory for zstd decompress

In reply to Sasha Levin

From: Chao Yu <[email protected]>

[ Upstream commit 0e2b7385cb59e566520cfd0a04b4b53bc9461e98 ]

As 5kft <[email protected]> reported:

kworker/u9:3: page allocation failure: order:9, mode:0x40c40(GFP_NOFS|__GFP_COMP), nodemask=(null),cpuset=/,mems_allowed=0

 CPU: 3 PID: 8168 Comm: kworker/u9:3 Tainted: G         C        5.8.3-sunxi #trunk
 Hardware name: Allwinner sun8i Family
 Workqueue: f2fs_post_read_wq f2fs_post_read_work
 [<c010d6d5>] (unwind_backtrace) from [<c0109a55>] (show_stack+0x11/0x14)
 [<c0109a55>] (show_stack) from [<c056d489>] (dump_stack+0x75/0x84)
 [<c056d489>] (dump_stack) from [<c0243b53>] (warn_alloc+0xa3/0x104)
 [<c0243b53>] (warn_alloc) from [<c024473b>] (__alloc_pages_nodemask+0xb87/0xc40)
 [<c024473b>] (__alloc_pages_nodemask) from [<c02267c5>] (kmalloc_order+0x19/0x38)
 [<c02267c5>] (kmalloc_order) from [<c02267fd>] (kmalloc_order_trace+0x19/0x90)
 [<c02267fd>] (kmalloc_order_trace) from [<c047c665>] (zstd_init_decompress_ctx+0x21/0x88)
 [<c047c665>] (zstd_init_decompress_ctx) from [<c047e9cf>] (f2fs_decompress_pages+0x97/0x228)
 [<c047e9cf>] (f2fs_decompress_pages) from [<c045d0ab>] (__read_end_io+0xfb/0x130)
 [<c045d0ab>] (__read_end_io) from [<c045d141>] (f2fs_post_read_work+0x61/0x84)
 [<c045d141>] (f2fs_post_read_work) from [<c0130b2f>] (process_one_work+0x15f/0x3b0)
 [<c0130b2f>] (process_one_work) from [<c0130e7b>] (worker_thread+0xfb/0x3e0)
 [<c0130e7b>] (worker_thread) from [<c0135c3b>] (kthread+0xeb/0x10c)
 [<c0135c3b>] (kthread) from [<c0100159>]

zstd may allocate large size memory for {,de}compression, it may cause file copy failure on low-end device which has very few memory.

For decompression, let's just allocate proper size memory based on current file's cluster size instead of max cluster size.

---
 fs/f2fs/compress.c | 7 ++++---
 fs/f2fs/f2fs.h     | 2 +-
 2 files changed, 5 insertions(+), 4 deletions(-)
fs/f2fs/compress.c +4 -3
index 2390f7943f6c8..47b62099533bd 100644
@@ -375,16 +375,17 @@ static int zstd_init_decompress_ctx(struct decompress_io_ctx *dic)
 	ZSTD_DStream *stream;
 	void *workspace;
 	unsigned int workspace_size;
+	unsigned int max_window_size =
+			MAX_COMPRESS_WINDOW_SIZE(dic->log_cluster_size);
 
-	workspace_size = ZSTD_DStreamWorkspaceBound(MAX_COMPRESS_WINDOW_SIZE);
+	workspace_size = ZSTD_DStreamWorkspaceBound(max_window_size);
 
 	workspace = f2fs_kvmalloc(F2FS_I_SB(dic->inode),
 					workspace_size, GFP_NOFS);
 	if (!workspace)
 		return -ENOMEM;
 
-	stream = ZSTD_initDStream(MAX_COMPRESS_WINDOW_SIZE,
-					workspace, workspace_size);
+	stream = ZSTD_initDStream(max_window_size, workspace, workspace_size);
 	if (!stream) {
 		printk_ratelimited("%sF2FS-fs (%s): %s ZSTD_initDStream failed\n",
 				KERN_ERR, F2FS_I_SB(dic->inode)->sb->s_id,
fs/f2fs/f2fs.h +1 -1
index 7d9afd54e9d8f..f03c573e427a5 100644
@@ -1392,7 +1392,7 @@ struct decompress_io_ctx {
 #define NULL_CLUSTER			((unsigned int)(~0))
 #define MIN_COMPRESS_LOG_SIZE		2
 #define MAX_COMPRESS_LOG_SIZE		8
-#define MAX_COMPRESS_WINDOW_SIZE	((PAGE_SIZE) << MAX_COMPRESS_LOG_SIZE)
+#define MAX_COMPRESS_WINDOW_SIZE(log_size)	((PAGE_SIZE) << (log_size))
 
 struct f2fs_sb_info {
 	struct super_block *sb;			/* pointer to VFS super block */
Signature · 8 lines
2.25.1



_______________________________________________
Linux-f2fs-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/linux-f2fs-devel
author maintainer
#3 lore raw

PATCH 4/132 powerpc/watchpoint/ptrace: Fix SETHWDEBUG when CONFIG_HAVE_HW_BREAKPOINT=N

In reply to Sasha Levin

From: Ravi Bangoria <[email protected]>

[ Upstream commit 9b6b7c680cc20971444d9f836e49fc98848bcd0a ]

When kernel is compiled with CONFIG_HAVE_HW_BREAKPOINT=N, user can still create watchpoint using PPC_PTRACE_SETHWDEBUG, with limited functionalities. But, such watchpoints are never firing because of the missing privilege settings. Fix that.

It's safe to set HW_BRK_TYPE_PRIV_ALL because we don't really leak any kernel address in signal info. Setting HW_BRK_TYPE_PRIV_ALL will also help to find scenarios when kernel accesses user memory.

---
 arch/powerpc/kernel/ptrace/ptrace-noadv.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/powerpc/kernel/ptrace/ptrace-noadv.c +1 -1
index 697c7e4b5877f..57a0ab822334f 100644
@@ -217,7 +217,7 @@ long ppc_set_hwdebug(struct task_struct *child, struct ppc_hw_breakpoint *bp_inf
 		return -EIO;
 
 	brk.address = ALIGN_DOWN(bp_info->addr, HW_BREAKPOINT_SIZE);
-	brk.type = HW_BRK_TYPE_TRANSLATE;
+	brk.type = HW_BRK_TYPE_TRANSLATE | HW_BRK_TYPE_PRIV_ALL;
 	brk.len = DABR_MAX_LEN;
 	if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_READ)
 		brk.type |= HW_BRK_TYPE_READ;
Signature · 1 line
2.25.1
author maintainer
#4 lore raw

PATCH 5/132 mm: fix exec activate_mm vs TLB shootdown and lazy tlb switching race

In reply to Sasha Levin

From: Nicholas Piggin <[email protected]>

[ Upstream commit d53c3dfb23c45f7d4f910c3a3ca84bf0a99c6143 ]

Reading and modifying current->mm and current->active_mm and switching mm should be done with irqs off, to prevent races seeing an intermediate state.

This is similar to commit 38cf307c1f20 ("mm: fix kthread_use_mm() vs TLB invalidate"). At exec-time when the new mm is activated, the old one should usually be single-threaded and no longer used, unless something else is holding an mm_users reference (which may be possible).

Absent other mm_users, there is also a race with preemption and lazy tlb switching. Consider the kernel_execve case where the current thread is using a lazy tlb active mm:

  call_usermodehelper()
    kernel_execve()
      old_mm = current->mm;
      active_mm = current->active_mm;
      *** preempt *** -------------------->  schedule()
                                               prev->active_mm = NULL;
                                               mmdrop(prev active_mm);
                                             ...
                      <--------------------  schedule()
      current->mm = mm;
      current->active_mm = mm;
      if (!old_mm)
          mmdrop(active_mm);

If we switch back to the kernel thread from a different mm, there is a double free of the old active_mm, and a missing free of the new one.

Closing this race only requires interrupts to be disabled while ->mm and ->active_mm are being switched, but the TLB problem requires also holding interrupts off over activate_mm. Unfortunately not all archs can do that yet, e.g., arm defers the switch if irqs are disabled and expects finish_arch_post_lock_switch() to be called to complete the flush; um takes a blocking lock in activate_mm().

So as a first step, disable interrupts across the mm/active_mm updates to close the lazy tlb preempt race, and provide an arch option to extend that to activate_mm which allows architectures doing IPI based TLB shootdowns to close the second race.

This is a bit ugly, but in the interest of fixing the bug and backporting before all architectures are converted this is a compromise.

---
 arch/Kconfig |  7 +++++++
 fs/exec.c    | 17 +++++++++++++++--
 2 files changed, 22 insertions(+), 2 deletions(-)
arch/Kconfig +7 -0
index 8cc35dc556c72..2fb97d79e7693 100644
@@ -411,6 +411,13 @@ config MMU_GATHER_NO_GATHER
 	bool
 	depends on MMU_GATHER_TABLE_FREE
 
+config ARCH_WANT_IRQS_OFF_ACTIVATE_MM
+	bool
+	help
+	  Temporary select until all architectures can be converted to have
+	  irqs disabled over activate_mm. Architectures that do IPI based TLB
+	  shootdowns should enable this.
+
 config ARCH_HAVE_NMI_SAFE_CMPXCHG
 	bool
 
fs/exec.c +15 -2
index e6e8a9a703278..791384bb02b05 100644
@@ -1103,11 +1103,24 @@ static int exec_mmap(struct mm_struct *mm)
 	}
 
 	task_lock(tsk);
-	active_mm = tsk->active_mm;
 	membarrier_exec_mmap(mm);
-	tsk->mm = mm;
+
+	local_irq_disable();
+	active_mm = tsk->active_mm;
 	tsk->active_mm = mm;
+	tsk->mm = mm;
+	/*
+	 * This prevents preemption while active_mm is being loaded and
+	 * it and mm are being updated, which could cause problems for
+	 * lazy tlb mm refcounting when these are updated by context
+	 * switches. Not all architectures can handle irqs off over
+	 * activate_mm yet.
+	 */
+	if (!IS_ENABLED(CONFIG_ARCH_WANT_IRQS_OFF_ACTIVATE_MM))
+		local_irq_enable();
 	activate_mm(active_mm, mm);
+	if (IS_ENABLED(CONFIG_ARCH_WANT_IRQS_OFF_ACTIVATE_MM))
+		local_irq_enable();
 	tsk->mm->vmacache_seqnum = 0;
 	vmacache_flush(tsk);
 	task_unlock(tsk);
Signature · 1 line
2.25.1
author maintainer
#5 lore raw

PATCH 6/132 powerpc: select ARCH_WANT_IRQS_OFF_ACTIVATE_MM

In reply to Sasha Levin

From: Nicholas Piggin <[email protected]>

[ Upstream commit 66acd46080bd9e5ad2be4b0eb1d498d5145d058e ]

powerpc uses IPIs in some situations to switch a kernel thread away from a lazy tlb mm, which is subject to the TLB flushing race described in the changelog introducing ARCH_WANT_IRQS_OFF_ACTIVATE_MM.

---
 arch/powerpc/Kconfig                   | 1 +
 arch/powerpc/include/asm/mmu_context.h | 2 +-
 2 files changed, 2 insertions(+), 1 deletion(-)
arch/powerpc/Kconfig +1 -0
index 9fa23eb320ff5..1692c9def44c9 100644
@@ -146,6 +146,7 @@ config PPC
 	select ARCH_USE_BUILTIN_BSWAP
 	select ARCH_USE_CMPXCHG_LOCKREF		if PPC64
 	select ARCH_WANT_IPC_PARSE_VERSION
+	select ARCH_WANT_IRQS_OFF_ACTIVATE_MM
 	select ARCH_WEAK_RELEASE_ACQUIRE
 	select BINFMT_ELF
 	select BUILDTIME_TABLE_SORT
arch/powerpc/include/asm/mmu_context.h +1 -1
index 1a474f6b1992a..6cb10c7a52025 100644
@@ -246,7 +246,7 @@ static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
  */
 static inline void activate_mm(struct mm_struct *prev, struct mm_struct *next)
 {
-	switch_mm(prev, next, current);
+	switch_mm_irqs_off(prev, next, current);
 }
 
 /* We don't currently use enter_lazy_tlb() for anything */
Signature · 1 line
2.25.1
author maintainer
#6 lore raw

PATCH 7/132 sparc64: remove mm_cpumask clearing to fix kthread_use_mm race

In reply to Sasha Levin

From: Nicholas Piggin <[email protected]>

[ Upstream commit bafb056ce27940c9994ea905336aa8f27b4f7275 ]

The de facto (and apparently uncommented) standard for using an mm had, thanks to this code in sparc if nothing else, been that you must have a reference on mm_users *and that reference must have been obtained with mmget()*, i.e., from a thread with a reference to mm_users that had used the mm.

The introduction of mmget_not_zero() in commit d2005e3f41d4 ("userfaultfd: don't pin the user memory in userfaultfd_file_create()") allowed mm_count holders to aoperate on user mappings asynchronously from the actual threads using the mm, but they were not to load those mappings into their TLB (i.e., walking vmas and page tables is okay, kthread_use_mm() is not).

io_uring 2b188cc1bb857 ("Add io_uring IO interface") added code which does a kthread_use_mm() from a mmget_not_zero() refcount.

The problem with this is code which previously assumed mm = current->mm and mm->mm_users = 1 implies the mm will remain single-threaded at least until this thread creates another mm_users reference, has now broken.

arch/sparc/kernel/smp_64.c:

    if (atomic_read(&mm->mm_users) = 1) {
        cpumask_copy(mm_cpumask(mm), cpumask_of(cpu));
        goto local_flush_and_out;
    }

vs fs/io_uring.c

    if (unlikely(!(ctx->flags & IORING_SETUP_SQPOLL) ||
                 !mmget_not_zero(ctx->sqo_mm)))
        return -EFAULT;
    kthread_use_mm(ctx->sqo_mm);

mmget_not_zero() could come in right after the mm_users = 1 test, then kthread_use_mm() which sets its CPU in the mm_cpumask. That update could be lost if cpumask_copy() occurs afterward.

I propose we fix this by allowing mmget_not_zero() to be a first-class reference, and not have this obscure undocumented and unchecked restriction.

The basic fix for sparc64 is to remove its mm_cpumask clearing code. The optimisation could be effectively restored by sending IPIs to mm_cpumask members and having them remove themselves from mm_cpumask. This is more tricky so I leave it as an exercise for someone with a sparc64 SMP. powerpc has a (currently similarly broken) example.

---
 arch/sparc/kernel/smp_64.c | 65 ++++++++------------------------------
 1 file changed, 14 insertions(+), 51 deletions(-)
arch/sparc/kernel/smp_64.c +14 -51
index 0085e28bf019a..d88467758ee87 100644
@@ -1038,38 +1038,9 @@ void smp_fetch_global_pmu(void)
  * are flush_tlb_*() routines, and these run after flush_cache_*()
  * which performs the flushw.
  *
- * The SMP TLB coherency scheme we use works as follows:
- *
- * 1) mm->cpu_vm_mask is a bit mask of which cpus an address
- *    space has (potentially) executed on, this is the heuristic
- *    we use to avoid doing cross calls.
- *
- *    Also, for flushing from kswapd and also for clones, we
- *    use cpu_vm_mask as the list of cpus to make run the TLB.
- *
- * 2) TLB context numbers are shared globally across all processors
- *    in the system, this allows us to play several games to avoid
- *    cross calls.
- *
- *    One invariant is that when a cpu switches to a process, and
- *    that processes tsk->active_mm->cpu_vm_mask does not have the
- *    current cpu's bit set, that tlb context is flushed locally.
- *
- *    If the address space is non-shared (ie. mm->count = 1) we avoid
- *    cross calls when we want to flush the currently running process's
- *    tlb state.  This is done by clearing all cpu bits except the current
- *    processor's in current->mm->cpu_vm_mask and performing the
- *    flush locally only.  This will force any subsequent cpus which run
- *    this task to flush the context from the local tlb if the process
- *    migrates to another cpu (again).
- *
- * 3) For shared address spaces (threads) and swapping we bite the
- *    bullet for most cases and perform the cross call (but only to
- *    the cpus listed in cpu_vm_mask).
- *
- *    The performance gain from "optimizing" away the cross call for threads is
- *    questionable (in theory the big win for threads is the massive sharing of
- *    address space state across processors).
+ * mm->cpu_vm_mask is a bit mask of which cpus an address
+ * space has (potentially) executed on, this is the heuristic
+ * we use to limit cross calls.
  */
 
 /* This currently is only used by the hugetlb arch pre-fault
@@ -1079,18 +1050,13 @@ void smp_fetch_global_pmu(void)
 void smp_flush_tlb_mm(struct mm_struct *mm)
 {
 	u32 ctx = CTX_HWBITS(mm->context);
-	int cpu = get_cpu();
 
-	if (atomic_read(&mm->mm_users) = 1) {
-		cpumask_copy(mm_cpumask(mm), cpumask_of(cpu));
-		goto local_flush_and_out;
-	}
+	get_cpu();
 
 	smp_cross_call_masked(&xcall_flush_tlb_mm,
 			      ctx, 0, 0,
 			      mm_cpumask(mm));
 
-local_flush_and_out:
 	__flush_tlb_mm(ctx, SECONDARY_CONTEXT);
 
 	put_cpu();
@@ -1113,17 +1079,15 @@ void smp_flush_tlb_pending(struct mm_struct *mm, unsigned long nr, unsigned long
 {
 	u32 ctx = CTX_HWBITS(mm->context);
 	struct tlb_pending_info info;
-	int cpu = get_cpu();
+
+	get_cpu();
 
 	info.ctx = ctx;
 	info.nr = nr;
 	info.vaddrs = vaddrs;
 
-	if (mm = current->mm && atomic_read(&mm->mm_users) = 1)
-		cpumask_copy(mm_cpumask(mm), cpumask_of(cpu));
-	else
-		smp_call_function_many(mm_cpumask(mm), tlb_pending_func,
-				       &info, 1);
+	smp_call_function_many(mm_cpumask(mm), tlb_pending_func,
+			       &info, 1);
 
 	__flush_tlb_pending(ctx, nr, vaddrs);
 
@@ -1133,14 +1097,13 @@ void smp_flush_tlb_pending(struct mm_struct *mm, unsigned long nr, unsigned long
 void smp_flush_tlb_page(struct mm_struct *mm, unsigned long vaddr)
 {
 	unsigned long context = CTX_HWBITS(mm->context);
-	int cpu = get_cpu();
 
-	if (mm = current->mm && atomic_read(&mm->mm_users) = 1)
-		cpumask_copy(mm_cpumask(mm), cpumask_of(cpu));
-	else
-		smp_cross_call_masked(&xcall_flush_tlb_page,
-				      context, vaddr, 0,
-				      mm_cpumask(mm));
+	get_cpu();
+
+	smp_cross_call_masked(&xcall_flush_tlb_page,
+			      context, vaddr, 0,
+			      mm_cpumask(mm));
+
 	__flush_tlb_page(context, vaddr);
 
 	put_cpu();
Signature · 1 line
2.25.1
author maintainer
#7 lore raw

PATCH 8/132 f2fs: add trace exit in exception path

In reply to Sasha Levin

From: Zhang Qilong <[email protected]>

[ Upstream commit 9b66482282888d02832b7d90239e1cdb18e4b431 ]

Missing the trace exit in f2fs_sync_dirty_inodes

---
 fs/f2fs/checkpoint.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)
fs/f2fs/checkpoint.c +5 -1
index 2360649302516..95ed2b1373608 100644
@@ -1047,8 +1047,12 @@ int f2fs_sync_dirty_inodes(struct f2fs_sb_info *sbi, enum inode_type type)
 				get_pages(sbi, is_dir ?
 				F2FS_DIRTY_DENTS : F2FS_DIRTY_DATA));
 retry:
-	if (unlikely(f2fs_cp_error(sbi)))
+	if (unlikely(f2fs_cp_error(sbi))) {
+		trace_f2fs_sync_dirty_inodes_exit(sbi->sb, is_dir,
+				get_pages(sbi, is_dir ?
+				F2FS_DIRTY_DENTS : F2FS_DIRTY_DATA));
 		return -EIO;
+	}
 
 	spin_lock(&sbi->inode_lock[type]);
 
Signature · 1 line
2.25.1
author maintainer
#8 lore raw

PATCH 9/132 f2fs: do sanity check on zoned block device path

In reply to Sasha Levin

From: Chao Yu <[email protected]>

[ Upstream commit 07eb1d699452de04e9d389ff17fb8fc9e975d7bf ]

sbi->devs would be initialized only if image enables multiple device feature or blkzoned feature, if blkzoned feature flag was set by fuzz in non-blkzoned device, we will suffer below panic:

get_zone_idx fs/f2fs/segment.c:4892 [inline]
f2fs_usable_zone_blks_in_seg fs/f2fs/segment.c:4943 [inline]
f2fs_usable_blks_in_seg+0x39b/0xa00 fs/f2fs/segment.c:4999
Call Trace:
 check_block_count+0x69/0x4e0 fs/f2fs/segment.h:704
 build_sit_entries fs/f2fs/segment.c:4403 [inline]
 f2fs_build_segment_manager+0x51da/0xa370 fs/f2fs/segment.c:5100
 f2fs_fill_super+0x3880/0x6ff0 fs/f2fs/super.c:3684
 mount_bdev+0x32e/0x3f0 fs/super.c:1417
 legacy_get_tree+0x105/0x220 fs/fs_context.c:592
 vfs_get_tree+0x89/0x2f0 fs/super.c:1547
 do_new_mount fs/namespace.c:2896 [inline]
 path_mount+0x12ae/0x1e70 fs/namespace.c:3216
 do_mount fs/namespace.c:3229 [inline]
 __do_sys_mount fs/namespace.c:3437 [inline]
 __se_sys_mount fs/namespace.c:3414 [inline]
 __x64_sys_mount+0x27f/0x300 fs/namespace.c:3414
 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46

Add sanity check to inconsistency on factors: blkzoned flag, device path and device character to avoid above panic.

---
 fs/f2fs/super.c | 6 ++++++
 1 file changed, 6 insertions(+)
fs/f2fs/super.c +6 -0
index 0deb839da0a03..28ab6cf26954a 100644
@@ -2782,6 +2782,12 @@ static int sanity_check_raw_super(struct f2fs_sb_info *sbi,
 					segment_count, dev_seg_count);
 			return -EFSCORRUPTED;
 		}
+	} else {
+		if (__F2FS_HAS_FEATURE(raw_super, F2FS_FEATURE_BLKZONED) &&
+					!bdev_is_zoned(sbi->sb->s_bdev)) {
+			f2fs_info(sbi, "Zoned block device path is missing");
+			return -EFSCORRUPTED;
+		}
 	}
 
 	if (secs_per_zone > total_sections || !secs_per_zone) {
Signature · 8 lines
2.25.1



_______________________________________________
Linux-f2fs-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/linux-f2fs-devel
author maintainer
#9 lore raw

PATCH 10/132 f2fs: fix uninit-value in f2fs_lookup

In reply to Sasha Levin

From: Chao Yu <[email protected]>

[ Upstream commit 6d7ab88a98c1b7a47c228f8ffb4f44d631eaf284 ]

As syzbot reported:

Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x21c/0x280 lib/dump_stack.c:118
 kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:122
 __msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:219
 f2fs_lookup+0xe05/0x1a80 fs/f2fs/namei.c:503
 lookup_open fs/namei.c:3082 [inline]
 open_last_lookups fs/namei.c:3177 [inline]
 path_openat+0x2729/0x6a90 fs/namei.c:3365
 do_filp_open+0x2b8/0x710 fs/namei.c:3395
 do_sys_openat2+0xa88/0x1140 fs/open.c:1168
 do_sys_open fs/open.c:1184 [inline]
 __do_compat_sys_openat fs/open.c:1242 [inline]
 __se_compat_sys_openat+0x2a4/0x310 fs/open.c:1240
 __ia32_compat_sys_openat+0x56/0x70 fs/open.c:1240
 do_syscall_32_irqs_on arch/x86/entry/common.c:80 [inline]
 __do_fast_syscall_32+0x129/0x180 arch/x86/entry/common.c:139
 do_fast_syscall_32+0x6a/0xc0 arch/x86/entry/common.c:162
 do_SYSENTER_32+0x73/0x90 arch/x86/entry/common.c:205
 entry_SYSENTER_compat_after_hwframe+0x4d/0x5c

In f2fs_lookup(), @res_page could be used before being initialized, because in __f2fs_find_entry(), once F2FS_I(dir)->i_current_depth was been fuzzed to zero, then @res_page will never be initialized, causing this kmsan warning, relocating @res_page initialization place to fix this bug.

---
 fs/f2fs/dir.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)
fs/f2fs/dir.c +3 -5
index d35976785e8c5..961d41fb84a57 100644
@@ -357,16 +357,15 @@ struct f2fs_dir_entry *__f2fs_find_entry(struct inode *dir,
 	unsigned int max_depth;
 	unsigned int level;
 
+	*res_page = NULL;
+
 	if (f2fs_has_inline_dentry(dir)) {
-		*res_page = NULL;
 		de = f2fs_find_in_inline_dir(dir, fname, res_page);
 		goto out;
 	}
 
-	if (npages == 0) {
-		*res_page = NULL;
+	if (npages == 0)
 		goto out;
-	}
 
 	max_depth = F2FS_I(dir)->i_current_depth;
 	if (unlikely(max_depth > MAX_DIR_HASH_DEPTH)) {
@@ -377,7 +376,6 @@ struct f2fs_dir_entry *__f2fs_find_entry(struct inode *dir,
 	}
 
 	for (level = 0; level < max_depth; level++) {
-		*res_page = NULL;
 		de = find_in_level(dir, level, fname, res_page);
 		if (de || IS_ERR(*res_page))
 			break;
Signature · 8 lines
2.25.1



_______________________________________________
Linux-f2fs-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/linux-f2fs-devel
author maintainer
#10 lore raw

PATCH 11/132 f2fs: fix to check segment boundary during SIT page readahead

In reply to Sasha Levin

From: Chao Yu <[email protected]>

[ Upstream commit 6a257471fa42c8c9c04a875cd3a2a22db148e0f0 ]

As syzbot reported:

kernel BUG at fs/f2fs/segment.h:657!
invalid opcode: 0000 [#1] PREEMPT SMP KASAN

CPU: 1 PID: 16220 Comm: syz-executor.0 Not tainted 5.9.0-rc5-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:f2fs_ra_meta_pages+0xa51/0xdc0 fs/f2fs/segment.h:657
Call Trace:
 build_sit_entries fs/f2fs/segment.c:4195 [inline]
 f2fs_build_segment_manager+0x4b8a/0xa3c0 fs/f2fs/segment.c:4779
 f2fs_fill_super+0x377d/0x6b80 fs/f2fs/super.c:3633
 mount_bdev+0x32e/0x3f0 fs/super.c:1417
 legacy_get_tree+0x105/0x220 fs/fs_context.c:592
 vfs_get_tree+0x89/0x2f0 fs/super.c:1547
 do_new_mount fs/namespace.c:2875 [inline]
 path_mount+0x1387/0x2070 fs/namespace.c:3192
 do_mount fs/namespace.c:3205 [inline]
 __do_sys_mount fs/namespace.c:3413 [inline]
 __se_sys_mount fs/namespace.c:3390 [inline]
 __x64_sys_mount+0x27f/0x300 fs/namespace.c:3390
 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

@blkno in f2fs_ra_meta_pages could exceed max segment count, causing panic in following sanity check in current_sit_addr(), add check condition to avoid this issue.

---
 fs/f2fs/checkpoint.c | 2 ++
 1 file changed, 2 insertions(+)
fs/f2fs/checkpoint.c +2 -0
index 95ed2b1373608..8270e924b9777 100644
@@ -243,6 +243,8 @@ int f2fs_ra_meta_pages(struct f2fs_sb_info *sbi, block_t start, int nrpages,
 					blkno * NAT_ENTRY_PER_BLOCK);
 			break;
 		case META_SIT:
+			if (unlikely(blkno >= TOTAL_SEGS(sbi)))
+				goto out;
 			/* get sit block addr */
 			fio.new_blkaddr = current_sit_addr(sbi,
 					blkno * SIT_ENTRY_PER_BLOCK);
Signature · 8 lines
2.25.1



_______________________________________________
Linux-f2fs-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/linux-f2fs-devel
author maintainer
#11 lore raw

PATCH 12/132 s390/startup: avoid save_area_sync overflow

In reply to Sasha Levin

From: Vasily Gorbik <[email protected]>

[ Upstream commit 2835c2ea95d50625108e47a459e1a47f6be836ce ]

Currently we overflow save_area_sync and write over save_area_async. Although this is not a real problem make startup_pgm_check_handler consistent with late pgm check handler and store [%r0,%r7] directly into gpregs_save_area.

---
 arch/s390/boot/head.S | 21 +++++++++++----------
 1 file changed, 11 insertions(+), 10 deletions(-)
arch/s390/boot/head.S +11 -10
index dae10961d0724..1a2c2b1ed9649 100644
@@ -360,22 +360,23 @@ ENTRY(startup_kdump)
 # the save area and does disabled wait with a faulty address.
 #
 ENTRY(startup_pgm_check_handler)
-	stmg	%r0,%r15,__LC_SAVE_AREA_SYNC
-	la	%r1,4095
-	stctg	%c0,%c15,__LC_CREGS_SAVE_AREA-4095(%r1)
-	mvc	__LC_GPREGS_SAVE_AREA-4095(128,%r1),__LC_SAVE_AREA_SYNC
-	mvc	__LC_PSW_SAVE_AREA-4095(16,%r1),__LC_PGM_OLD_PSW
+	stmg	%r8,%r15,__LC_SAVE_AREA_SYNC
+	la	%r8,4095
+	stctg	%c0,%c15,__LC_CREGS_SAVE_AREA-4095(%r8)
+	stmg	%r0,%r7,__LC_GPREGS_SAVE_AREA-4095(%r8)
+	mvc	__LC_GPREGS_SAVE_AREA-4095+64(64,%r8),__LC_SAVE_AREA_SYNC
+	mvc	__LC_PSW_SAVE_AREA-4095(16,%r8),__LC_PGM_OLD_PSW
 	mvc	__LC_RETURN_PSW(16),__LC_PGM_OLD_PSW
 	ni	__LC_RETURN_PSW,0xfc	# remove IO and EX bits
 	ni	__LC_RETURN_PSW+1,0xfb	# remove MCHK bit
 	oi	__LC_RETURN_PSW+1,0x2	# set wait state bit
-	larl	%r2,.Lold_psw_disabled_wait
-	stg	%r2,__LC_PGM_NEW_PSW+8
-	l	%r15,.Ldump_info_stack-.Lold_psw_disabled_wait(%r2)
+	larl	%r9,.Lold_psw_disabled_wait
+	stg	%r9,__LC_PGM_NEW_PSW+8
+	l	%r15,.Ldump_info_stack-.Lold_psw_disabled_wait(%r9)
 	brasl	%r14,print_pgm_check_info
 .Lold_psw_disabled_wait:
-	la	%r1,4095
-	lmg	%r0,%r15,__LC_GPREGS_SAVE_AREA-4095(%r1)
+	la	%r8,4095
+	lmg	%r0,%r15,__LC_GPREGS_SAVE_AREA-4095(%r8)
 	lpswe	__LC_RETURN_PSW		# disabled wait
 .Ldump_info_stack:
 	.long	0x5000 + PAGE_SIZE - STACK_FRAME_OVERHEAD
Signature · 1 line
2.25.1
author maintainer
#12 lore raw

PATCH 13/132 f2fs: compress: fix to disallow enabling compress on non-empty file

In reply to Sasha Levin

From: Chao Yu <[email protected]>

[ Upstream commit 519a5a2f37b850f4eb86674a10d143088670a390 ]

Compressed inode and normal inode has different layout, so we should disallow enabling compress on non-empty file to avoid race condition during inode .i_addr array parsing and updating.

[Jaegeuk Kim: Fix missing condition]
---
 fs/f2fs/file.c | 2 ++
 1 file changed, 2 insertions(+)
fs/f2fs/file.c +2 -0
index 3268f8dd59bba..408a99fdaaea2 100644
@@ -1837,6 +1837,8 @@ static int f2fs_setflags_common(struct inode *inode, u32 iflags, u32 mask)
 		if (iflags & F2FS_COMPR_FL) {
 			if (!f2fs_may_compress(inode))
 				return -EINVAL;
+			if (S_ISREG(inode->i_mode) && inode->i_size)
+				return -EINVAL;
 
 			set_compress_context(inode);
 		}
Signature · 8 lines
2.25.1



_______________________________________________
Linux-f2fs-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/linux-f2fs-devel
author maintainer
#13 lore raw

PATCH 14/132 um: change sigio_spinlock to a mutex

In reply to Sasha Levin

From: Johannes Berg <[email protected]>

[ Upstream commit f2d05059e15af3f70502074f4e3a504530af504a ]

Lockdep complains at boot:

=============================
[ BUG: Invalid wait context ]
5.7.0-05093-g46d91ecd597b #98 Not tainted
-----------------------------
swapper/1 is trying to lock:
0000000060931b98 (&desc[i].request_mutex){+.+.}-{3:3}, at: __setup_irq+0x11d/0x623 other info that might help us debug this:
context-{4:4}
1 lock held by swapper/1:
#0: 000000006074fed8 (sigio_spinlock){+.+.}-{2:2}, at: sigio_lock+0x1a/0x1c

stack backtrace:
CPU: 0 PID: 1 Comm: swapper Not tainted 5.7.0-05093-g46d91ecd597b #98
Stack:
 7fa4fab0 6028dfd1 0000002a 6008bea5
 7fa50700 7fa50040 7fa4fac0 6028e016
 7fa4fb50 6007f6da 60959c18 00000000
Call Trace:
 [<60023a0e>] show_stack+0x13b/0x155
 [<6028e016>] dump_stack+0x2a/0x2c
 [<6007f6da>] __lock_acquire+0x515/0x15f2
 [<6007eb50>] lock_acquire+0x245/0x273
 [<6050d9f1>] __mutex_lock+0xbd/0x325
 [<6050dc76>] mutex_lock_nested+0x1d/0x1f
 [<6008e27e>] __setup_irq+0x11d/0x623
 [<6008e8ed>] request_threaded_irq+0x169/0x1a6
 [<60021eb0>] um_request_irq+0x1ee/0x24b
 [<600234ee>] write_sigio_irq+0x3b/0x76
 [<600383ca>] sigio_broken+0x146/0x2e4
 [<60020bd8>] do_one_initcall+0xde/0x281

Because we hold sigio_spinlock and then get into requesting an interrupt with a mutex.

Change the spinlock to a mutex to avoid that.

---
 arch/um/kernel/sigio.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
arch/um/kernel/sigio.c +3 -3
index 10c99e058fcae..d1cffc2a7f212 100644
@@ -35,14 +35,14 @@ int write_sigio_irq(int fd)
 }
 
 /* These are called from os-Linux/sigio.c to protect its pollfds arrays. */
-static DEFINE_SPINLOCK(sigio_spinlock);
+static DEFINE_MUTEX(sigio_mutex);
 
 void sigio_lock(void)
 {
-	spin_lock(&sigio_spinlock);
+	mutex_lock(&sigio_mutex);
 }
 
 void sigio_unlock(void)
 {
-	spin_unlock(&sigio_spinlock);
+	mutex_unlock(&sigio_mutex);
 }
Signature · 7 lines
2.25.1


_______________________________________________
linux-um mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-um
author maintainer
#14 lore raw

PATCH 15/132 f2fs: handle errors of f2fs_get_meta_page_nofail

In reply to Sasha Levin

From: Jaegeuk Kim <[email protected]>

[ Upstream commit 86f33603f8c51537265ff7ac0320638fd2cbdb1b ]

First problem is we hit BUG_ON() in f2fs_get_sum_page given EIO on f2fs_get_meta_page_nofail().

Quick fix was not to give any error with infinite loop, but syzbot caught a case where it goes to that loop from fuzzed image. In turned out we abused f2fs_get_meta_page_nofail() like in the below call stack.

- f2fs_fill_super
- f2fs_build_segment_manager
- build_sit_entries
- get_current_sit_page

INFO: task syz-executor178:6870 can't die for more than 143 seconds.
task:syz-executor178 state:R
 stack:26960 pid: 6870 ppid:  6869 flags:0x00004006
Call Trace:

Showing all locks held in the system:
1 lock held by khungtaskd/1179:
 #0: ffffffff8a554da0 (rcu_read_lock){....}-{1:2}, at: debug_show_all_locks+0x53/0x260 kernel/locking/lockdep.c:6242
1 lock held by systemd-journal/3920:
1 lock held by in:imklog/6769:
 #0: ffff88809eebc130 (&f->f_pos_lock){+.+.}-{3:3}, at: __fdget_pos+0xe9/0x100 fs/file.c:930
1 lock held by syz-executor178/6870:
 #0: ffff8880925120e0 (&type->s_umount_key#47/1){+.+.}-{3:3}, at: alloc_super+0x201/0xaf0 fs/super.c:229

Actually, we didn't have to use _nofail in this case, since we could return error to mount(2) already with the error handler.

As a result, this patch tries to 1) remove _nofail callers as much as possible,
2) deal with error case in last remaining caller, f2fs_get_sum_page().

---
 fs/f2fs/checkpoint.c |  2 +-
 fs/f2fs/f2fs.h       |  2 +-
 fs/f2fs/node.c       |  2 +-
 fs/f2fs/segment.c    | 12 +++++++++---
 4 files changed, 12 insertions(+), 6 deletions(-)
fs/f2fs/checkpoint.c +1 -1
index 8270e924b9777..83acd51bea13d 100644
@@ -107,7 +107,7 @@ struct page *f2fs_get_meta_page(struct f2fs_sb_info *sbi, pgoff_t index)
 	return __get_meta_page(sbi, index, true);
 }
 
-struct page *f2fs_get_meta_page_nofail(struct f2fs_sb_info *sbi, pgoff_t index)
+struct page *f2fs_get_meta_page_retry(struct f2fs_sb_info *sbi, pgoff_t index)
 {
 	struct page *page;
 	int count = 0;
fs/f2fs/f2fs.h +1 -1
index f03c573e427a5..3713d1c453592 100644
@@ -3377,7 +3377,7 @@ enum rw_hint f2fs_io_type_to_rw_hint(struct f2fs_sb_info *sbi,
 void f2fs_stop_checkpoint(struct f2fs_sb_info *sbi, bool end_io);
 struct page *f2fs_grab_meta_page(struct f2fs_sb_info *sbi, pgoff_t index);
 struct page *f2fs_get_meta_page(struct f2fs_sb_info *sbi, pgoff_t index);
-struct page *f2fs_get_meta_page_nofail(struct f2fs_sb_info *sbi, pgoff_t index);
+struct page *f2fs_get_meta_page_retry(struct f2fs_sb_info *sbi, pgoff_t index);
 struct page *f2fs_get_tmp_page(struct f2fs_sb_info *sbi, pgoff_t index);
 bool f2fs_is_valid_blkaddr(struct f2fs_sb_info *sbi,
 					block_t blkaddr, int type);
fs/f2fs/node.c +1 -1
index 0fde35611df18..6196117923bca 100644
@@ -109,7 +109,7 @@ static void clear_node_page_dirty(struct page *page)
 
 static struct page *get_current_nat_page(struct f2fs_sb_info *sbi, nid_t nid)
 {
-	return f2fs_get_meta_page_nofail(sbi, current_nat_addr(sbi, nid));
+	return f2fs_get_meta_page(sbi, current_nat_addr(sbi, nid));
 }
 
 static struct page *get_next_nat_page(struct f2fs_sb_info *sbi, nid_t nid)
fs/f2fs/segment.c +9 -3
index 196f315035118..f41b475aa4aad 100644
@@ -2318,7 +2318,9 @@ int f2fs_npages_for_summary_flush(struct f2fs_sb_info *sbi, bool for_ra)
  */
 struct page *f2fs_get_sum_page(struct f2fs_sb_info *sbi, unsigned int segno)
 {
-	return f2fs_get_meta_page_nofail(sbi, GET_SUM_BLOCK(sbi, segno));
+	if (unlikely(f2fs_cp_error(sbi)))
+		return ERR_PTR(-EIO);
+	return f2fs_get_meta_page_retry(sbi, GET_SUM_BLOCK(sbi, segno));
 }
 
 void f2fs_update_meta_page(struct f2fs_sb_info *sbi,
@@ -2590,7 +2592,11 @@ static void change_curseg(struct f2fs_sb_info *sbi, int type)
 	__next_free_blkoff(sbi, curseg, 0);
 
 	sum_page = f2fs_get_sum_page(sbi, new_segno);
-	f2fs_bug_on(sbi, IS_ERR(sum_page));
+	if (IS_ERR(sum_page)) {
+		/* GC won't be able to use stale summary pages by cp_error */
+		memset(curseg->sum_blk, 0, SUM_ENTRY_SIZE);
+		return;
+	}
 	sum_node = (struct f2fs_summary_block *)page_address(sum_page);
 	memcpy(curseg->sum_blk, sum_node, SUM_ENTRY_SIZE);
 	f2fs_put_page(sum_page, 1);
@@ -3759,7 +3765,7 @@ int f2fs_lookup_journal_in_cursum(struct f2fs_journal *journal, int type,
 static struct page *get_current_sit_page(struct f2fs_sb_info *sbi,
 					unsigned int segno)
 {
-	return f2fs_get_meta_page_nofail(sbi, current_sit_addr(sbi, segno));
+	return f2fs_get_meta_page(sbi, current_sit_addr(sbi, segno));
 }
 
 static struct page *get_next_sit_page(struct f2fs_sb_info *sbi,
Signature · 8 lines
2.25.1



_______________________________________________
Linux-f2fs-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/linux-f2fs-devel
author maintainer
#15 lore raw

PATCH 16/132 afs: Don't assert on unpurgeable server records

In reply to Sasha Levin

From: David Howells <[email protected]>

[ Upstream commit 7530d3eb3dcf1a30750e8e7f1f88b782b96b72b8 ]

Don't give an assertion failure on unpurgeable afs_server records - which kills the thread - but rather emit a trace line when we are purging a record (which only happens during network namespace removal or rmmod) and print a notice of the problem.

---
 fs/afs/server.c            | 7 ++++++-
 include/trace/events/afs.h | 2 ++
 2 files changed, 8 insertions(+), 1 deletion(-)
fs/afs/server.c +6 -1
index e82e452e26124..684a2b02b9ff7 100644
@@ -550,7 +550,12 @@ void afs_manage_servers(struct work_struct *work)
 
 		_debug("manage %pU %u", &server->uuid, active);
 
-		ASSERTIFCMP(purging, active, ==, 0);
+		if (purging) {
+			trace_afs_server(server, atomic_read(&server->ref),
+					 active, afs_server_trace_purging);
+			if (active != 0)
+				pr_notice("Can't purge s=%08x\n", server->debug_id);
+		}
 
 		if (active == 0) {
 			time64_t expire_at = server->unuse_time;
include/trace/events/afs.h +2 -0
index 5f0c1cf1ea130..55d53234bfdf6 100644
@@ -40,6 +40,7 @@ enum afs_server_trace {
 	afs_server_trace_get_new_cbi,
 	afs_server_trace_get_probe,
 	afs_server_trace_give_up_cb,
+	afs_server_trace_purging,
 	afs_server_trace_put_call,
 	afs_server_trace_put_cbi,
 	afs_server_trace_put_find_rsq,
@@ -270,6 +271,7 @@ enum afs_cb_break_reason {
 	EM(afs_server_trace_get_new_cbi,	"GET cbi  ") \
 	EM(afs_server_trace_get_probe,		"GET probe") \
 	EM(afs_server_trace_give_up_cb,		"giveup-cb") \
+	EM(afs_server_trace_purging,		"PURGE    ") \
 	EM(afs_server_trace_put_call,		"PUT call ") \
 	EM(afs_server_trace_put_cbi,		"PUT cbi  ") \
 	EM(afs_server_trace_put_find_rsq,	"PUT f-rsq") \
Signature · 1 line
2.25.1
author maintainer
#16 lore raw

PATCH 17/132 MIPS: ftrace: Remove redundant #ifdef CONFIG_DYNAMIC_FTRACE

In reply to Sasha Levin

From: Zejiang Tang <[email protected]>

[ Upstream commit 39116103a7345927fa99644d08bc0cc9d45fea6f ]

There exists redundant #ifdef CONFIG_DYNAMIC_FTRACE in ftrace.c, remove it.

---
 arch/mips/kernel/ftrace.c | 4 ----
 1 file changed, 4 deletions(-)
arch/mips/kernel/ftrace.c +0 -4
index 2625232bfe526..f57e68f40a348 100644
@@ -37,10 +37,6 @@ void arch_ftrace_update_code(int command)
 	ftrace_modify_all_code(command);
 }
 
-#endif
-
-#ifdef CONFIG_DYNAMIC_FTRACE
-
 #define JAL 0x0c000000		/* jump & link: ip --> ra, jump to target */
 #define ADDR_MASK 0x03ffffff	/*  op_code|addr : 31...26|25 ....0 */
 #define JUMP_RANGE_MASK ((1UL << 28) - 1)
Signature · 1 line
2.25.1
author maintainer
#17 lore raw

PATCH 18/132 powerpc/64s: handle ISA v3.1 local copy-paste context switches

In reply to Sasha Levin

From: Nicholas Piggin <[email protected]>

[ Upstream commit dc462267d2d7aacffc3c1d99b02d7a7c59db7c66 ]

The ISA v3.1 the copy-paste facility has a new memory move functionality which allows the copy buffer to be pasted to domestic memory (RAM) as opposed to foreign memory (accelerator).

This means the POWER9 trick of avoiding the cp_abort on context switch if the process had not mapped foreign memory does not work on POWER10. Do the cp_abort unconditionally there.

KVM must also cp_abort on guest exit to prevent copy buffer state leaking between contexts.

---
 arch/powerpc/kernel/process.c           | 16 +++++++++-------
 arch/powerpc/kvm/book3s_hv.c            |  7 +++++++
 arch/powerpc/kvm/book3s_hv_rmhandlers.S |  8 ++++++++
 3 files changed, 24 insertions(+), 7 deletions(-)
arch/powerpc/kernel/process.c +9 -7
index 4650b9bb217fb..fcae69ac9acaa 100644
@@ -1231,15 +1231,17 @@ struct task_struct *__switch_to(struct task_struct *prev,
 		restore_math(current->thread.regs);
 
 		/*
-		 * The copy-paste buffer can only store into foreign real
-		 * addresses, so unprivileged processes can not see the
-		 * data or use it in any way unless they have foreign real
-		 * mappings. If the new process has the foreign real address
-		 * mappings, we must issue a cp_abort to clear any state and
-		 * prevent snooping, corruption or a covert channel.
+		 * On POWER9 the copy-paste buffer can only paste into
+		 * foreign real addresses, so unprivileged processes can not
+		 * see the data or use it in any way unless they have
+		 * foreign real mappings. If the new process has the foreign
+		 * real address mappings, we must issue a cp_abort to clear
+		 * any state and prevent snooping, corruption or a covert
+		 * channel. ISA v3.1 supports paste into local memory.
 		 */
 		if (current->mm &&
-			atomic_read(&current->mm->context.vas_windows))
+			(cpu_has_feature(CPU_FTR_ARCH_31) ||
+			atomic_read(&current->mm->context.vas_windows)))
 			asm volatile(PPC_CP_ABORT);
 	}
 #endif /* CONFIG_PPC_BOOK3S_64 */
arch/powerpc/kvm/book3s_hv.c +7 -0
index 6bf66649ab92f..1928b86d6e6b5 100644
@@ -3485,6 +3485,13 @@ static int kvmhv_load_hv_regs_and_go(struct kvm_vcpu *vcpu, u64 time_limit,
 	 */
 	asm volatile("eieio; tlbsync; ptesync");
 
+	/*
+	 * cp_abort is required if the processor supports local copy-paste
+	 * to clear the copy buffer that was under control of the guest.
+	 */
+	if (cpu_has_feature(CPU_FTR_ARCH_31))
+		asm volatile(PPC_CP_ABORT);
+
 	mtspr(SPRN_LPID, vcpu->kvm->arch.host_lpid);	/* restore host LPID */
 	isync();
 
arch/powerpc/kvm/book3s_hv_rmhandlers.S +8 -0
index 71943892c81c6..092ef0ee29753 100644
@@ -1830,6 +1830,14 @@ END_FTR_SECTION_IFSET(CPU_FTR_P9_RADIX_PREFETCH_BUG)
 2:
 #endif /* CONFIG_PPC_RADIX_MMU */
 
+	/*
+	 * cp_abort is required if the processor supports local copy-paste
+	 * to clear the copy buffer that was under control of the guest.
+	 */
+BEGIN_FTR_SECTION
+	PPC_CP_ABORT
+END_FTR_SECTION_IFSET(CPU_FTR_ARCH_31)
+
 	/*
 	 * POWER7/POWER8 guest -> host partition switch code.
 	 * We don't have to lock against tlbies but we do
Signature · 1 line
2.25.1
author maintainer
#18 lore raw

PATCH 19/132 ARM: 8997/2: hw_breakpoint: Handle inexact watchpoint addresses

In reply to Sasha Levin

From: Douglas Anderson <[email protected]>

[ Upstream commit 22c9e58299e5f18274788ce54c03d4fb761e3c5d ]

This is commit fdfeff0f9e3d ("arm64: hw_breakpoint: Handle inexact watchpoint addresses") but ported to arm32, which has the same problem.

This problem was found by Android CTS tests, notably the "watchpoint_imprecise" test [1]. I tested locally against a copycat (simplified) version of the test though.

[1] https://android.googlesource.com/platform/bionic/+/master/tests/sys_ptrace_test.cpp

---
 arch/arm/kernel/hw_breakpoint.c | 100 +++++++++++++++++++++++---------
 1 file changed, 72 insertions(+), 28 deletions(-)
arch/arm/kernel/hw_breakpoint.c +72 -28
index 7fff88e612525..4b0e4b19b04ed 100644
@@ -683,6 +683,40 @@ static void disable_single_step(struct perf_event *bp)
 	arch_install_hw_breakpoint(bp);
 }
 
+/*
+ * Arm32 hardware does not always report a watchpoint hit address that matches
+ * one of the watchpoints set. It can also report an address "near" the
+ * watchpoint if a single instruction access both watched and unwatched
+ * addresses. There is no straight-forward way, short of disassembling the
+ * offending instruction, to map that address back to the watchpoint. This
+ * function computes the distance of the memory access from the watchpoint as a
+ * heuristic for the likelyhood that a given access triggered the watchpoint.
+ *
+ * See this same function in the arm64 platform code, which has the same
+ * problem.
+ *
+ * The function returns the distance of the address from the bytes watched by
+ * the watchpoint. In case of an exact match, it returns 0.
+ */
+static u32 get_distance_from_watchpoint(unsigned long addr, u32 val,
+					struct arch_hw_breakpoint_ctrl *ctrl)
+{
+	u32 wp_low, wp_high;
+	u32 lens, lene;
+
+	lens = __ffs(ctrl->len);
+	lene = __fls(ctrl->len);
+
+	wp_low = val + lens;
+	wp_high = val + lene;
+	if (addr < wp_low)
+		return wp_low - addr;
+	else if (addr > wp_high)
+		return addr - wp_high;
+	else
+		return 0;
+}
+
 static int watchpoint_fault_on_uaccess(struct pt_regs *regs,
 				       struct arch_hw_breakpoint *info)
 {
@@ -692,23 +726,25 @@ static int watchpoint_fault_on_uaccess(struct pt_regs *regs,
 static void watchpoint_handler(unsigned long addr, unsigned int fsr,
 			       struct pt_regs *regs)
 {
-	int i, access;
-	u32 val, ctrl_reg, alignment_mask;
+	int i, access, closest_match = 0;
+	u32 min_dist = -1, dist;
+	u32 val, ctrl_reg;
 	struct perf_event *wp, **slots;
 	struct arch_hw_breakpoint *info;
 	struct arch_hw_breakpoint_ctrl ctrl;
 
 	slots = this_cpu_ptr(wp_on_reg);
 
+	/*
+	 * Find all watchpoints that match the reported address. If no exact
+	 * match is found. Attribute the hit to the closest watchpoint.
+	 */
+	rcu_read_lock();
 	for (i = 0; i < core_num_wrps; ++i) {
-		rcu_read_lock();
-
 		wp = slots[i];
-
 		if (wp == NULL)
-			goto unlock;
+			continue;
 
-		info = counter_arch_bp(wp);
 		/*
 		 * The DFAR is an unknown value on debug architectures prior
 		 * to 7.1. Since we only allow a single watchpoint on these
@@ -717,33 +753,31 @@ static void watchpoint_handler(unsigned long addr, unsigned int fsr,
 		 */
 		if (debug_arch < ARM_DEBUG_ARCH_V7_1) {
 			BUG_ON(i > 0);
+			info = counter_arch_bp(wp);
 			info->trigger = wp->attr.bp_addr;
 		} else {
-			if (info->ctrl.len == ARM_BREAKPOINT_LEN_8)
-				alignment_mask = 0x7;
-			else
-				alignment_mask = 0x3;
-
-			/* Check if the watchpoint value matches. */
-			val = read_wb_reg(ARM_BASE_WVR + i);
-			if (val != (addr & ~alignment_mask))
-				goto unlock;
-
-			/* Possible match, check the byte address select. */
-			ctrl_reg = read_wb_reg(ARM_BASE_WCR + i);
-			decode_ctrl_reg(ctrl_reg, &ctrl);
-			if (!((1 << (addr & alignment_mask)) & ctrl.len))
-				goto unlock;
-
 			/* Check that the access type matches. */
 			if (debug_exception_updates_fsr()) {
 				access = (fsr & ARM_FSR_ACCESS_MASK) ?
 					  HW_BREAKPOINT_W : HW_BREAKPOINT_R;
 				if (!(access & hw_breakpoint_type(wp)))
-					goto unlock;
+					continue;
 			}
 
+			val = read_wb_reg(ARM_BASE_WVR + i);
+			ctrl_reg = read_wb_reg(ARM_BASE_WCR + i);
+			decode_ctrl_reg(ctrl_reg, &ctrl);
+			dist = get_distance_from_watchpoint(addr, val, &ctrl);
+			if (dist < min_dist) {
+				min_dist = dist;
+				closest_match = i;
+			}
+			/* Is this an exact match? */
+			if (dist != 0)
+				continue;
+
 			/* We have a winner. */
+			info = counter_arch_bp(wp);
 			info->trigger = addr;
 		}
 
@@ -765,13 +799,23 @@ static void watchpoint_handler(unsigned long addr, unsigned int fsr,
 		 * we can single-step over the watchpoint trigger.
 		 */
 		if (!is_default_overflow_handler(wp))
-			goto unlock;
-
+			continue;
 step:
 		enable_single_step(wp, instruction_pointer(regs));
-unlock:
-		rcu_read_unlock();
 	}
+
+	if (min_dist > 0 && min_dist != -1) {
+		/* No exact match found. */
+		wp = slots[closest_match];
+		info = counter_arch_bp(wp);
+		info->trigger = addr;
+		pr_debug("watchpoint fired: address = 0x%x\n", info->trigger);
+		perf_bp_event(wp, regs);
+		if (is_default_overflow_handler(wp))
+			enable_single_step(wp, instruction_pointer(regs));
+	}
+
+	rcu_read_unlock();
 }
 
 static void watchpoint_single_step_handler(unsigned long pc)
Signature · 1 line
2.25.1
author maintainer
#19 lore raw

PATCH 20/132 NFS4: Fix oops when copy_file_range is attempted with NFS4.0 source

In reply to Sasha Levin

From: Dave Wysochanski <[email protected]>

[ Upstream commit d8a6ad913c286d4763ae20b14c02fe6f39d7cd9f ]

The following oops is seen during xfstest/565 when the 'test' (source of the copy) is NFS4.0 and 'scratch' (destination) is NFS4.2

[   59.692458] run fstests generic/565 at 2020-08-01 05:50:35
[   60.613588] BUG: kernel NULL pointer dereference, address: 0000000000000008
[   60.624970] #PF: supervisor read access in kernel mode
[   60.627671] #PF: error_code(0x0000) - not-present page
[   60.630347] PGD 0 P4D 0
[   60.631853] Oops: 0000 [#1] SMP PTI
[   60.634086] CPU: 6 PID: 2828 Comm: xfs_io Kdump: loaded Not tainted 5.8.0-rc3 #1
[   60.637676] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
[   60.639901] RIP: 0010:nfs4_check_serverowner_major_id+0x5/0x30 [nfsv4]
[   60.642719] Code: 89 ff e8 3e b3 b8 e1 e9 71 fe ff ff 41 bc da d8 ff ff e9 c3 fe ff ff e8 e9 9d 08 e2 66 0f 1f 84 00 00 00 00 00 66 66 66 66 90 <8b> 57 08 31 c0 3b 56 08 75 12 48 83 c6 0c 48 83 c7 0c e8 c4 97 bb
[   60.652629] RSP: 0018:ffffc265417f7e10 EFLAGS: 00010287
[   60.655379] RAX: ffffa0664b066400 RBX: 0000000000000000 RCX: 0000000000000001
[   60.658754] RDX: ffffa066725fb000 RSI: ffffa066725fd000 RDI: 0000000000000000
[   60.662292] RBP: 0000000000020000 R08: 0000000000020000 R09: 0000000000000000
[   60.666189] R10: 0000000000000003 R11: 0000000000000000 R12: ffffa06648258d00
[   60.669914] R13: 0000000000000000 R14: 0000000000000000 R15: ffffa06648258100
[   60.673645] FS:  00007faa9fb35800(0000) GS:ffffa06677d80000(0000) knlGS:0000000000000000
[   60.677698] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   60.680773] CR2: 0000000000000008 CR3: 0000000203f14000 CR4: 00000000000406e0
[   60.684476] Call Trace:
[   60.685809]  nfs4_copy_file_range+0xfc/0x230 [nfsv4]
[   60.688704]  vfs_copy_file_range+0x2ee/0x310
[   60.691104]  __x64_sys_copy_file_range+0xd6/0x210
[   60.693527]  do_syscall_64+0x4d/0x90
[   60.695512]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[   60.698006] RIP: 0033:0x7faa9febc1bd
---
 fs/nfs/nfs4file.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
fs/nfs/nfs4file.c +2 -1
index a339707654673..af84787aa0631 100644
@@ -145,7 +145,8 @@ static ssize_t __nfs4_copy_file_range(struct file *file_in, loff_t pos_in,
 	/* Only offload copy if superblock is the same */
 	if (file_in->f_op != &nfs4_file_operations)
 		return -EXDEV;
-	if (!nfs_server_capable(file_inode(file_out), NFS_CAP_COPY))
+	if (!nfs_server_capable(file_inode(file_out), NFS_CAP_COPY) ||
+	    !nfs_server_capable(file_inode(file_in), NFS_CAP_COPY))
 		return -EOPNOTSUPP;
 	if (file_inode(file_in) == file_inode(file_out))
 		return -EOPNOTSUPP;
Signature · 1 line
2.25.1
author maintainer
#20 lore raw

PATCH 21/132 xfs: Set xfs_buf type flag when growing summary/bitmap files

In reply to Sasha Levin

From: Chandan Babu R <[email protected]>

[ Upstream commit 72cc95132a93293dcd0b6f68353f4741591c9aeb ]

The following sequence of commands,

mkfs.xfs -f -m reflink=0 -r rtdev=/dev/loop1,size=10M /dev/loop0 mount -o rtdev=/dev/loop1 /dev/loop0 /mnt
xfs_growfs /mnt

... causes the following call trace to be printed on the console,

XFS: Assertion failed: (bip->bli_flags & XFS_BLI_STALE) || (xfs_blft_from_flags(&bip->__bli_format) > XFS_BLFT_UNKNOWN_BUF && xfs_blft_from_flags(&bip->__bli_format) < XFS_BLFT_MAX_BUF), file: fs/xfs/xfs_buf_item.c, line: 331

Call Trace:
 xfs_buf_item_format+0x632/0x680
 ? kmem_alloc_large+0x29/0x90
 ? kmem_alloc+0x70/0x120
 ? xfs_log_commit_cil+0x132/0x940
 xfs_log_commit_cil+0x26f/0x940
 ? xfs_buf_item_init+0x1ad/0x240
 ? xfs_growfs_rt_alloc+0x1fc/0x280
 __xfs_trans_commit+0xac/0x370
 xfs_growfs_rt_alloc+0x1fc/0x280
 xfs_growfs_rt+0x1a0/0x5e0
 xfs_file_ioctl+0x3fd/0xc70
 ? selinux_file_ioctl+0x174/0x220
 ksys_ioctl+0x87/0xc0
 __x64_sys_ioctl+0x16/0x20
 do_syscall_64+0x3e/0x70
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

This occurs because the buffer being formatted has the value of XFS_BLFT_UNKNOWN_BUF assigned to the 'type' subfield of bip->bli_formats->blf_flags.

This commit fixes the issue by assigning one of XFS_BLFT_RTSUMMARY_BUF and XFS_BLFT_RTBITMAP_BUF to the 'type' subfield of bip->bli_formats->blf_flags before committing the corresponding transaction.

---
 fs/xfs/xfs_rtalloc.c | 8 ++++++++
 1 file changed, 8 insertions(+)
fs/xfs/xfs_rtalloc.c +8 -0
index 6209e7b6b895b..04b953c3ffa75 100644
@@ -767,8 +767,14 @@ xfs_growfs_rt_alloc(
 	struct xfs_bmbt_irec	map;		/* block map output */
 	int			nmap;		/* number of block maps */
 	int			resblks;	/* space reservation */
+	enum xfs_blft		buf_type;
 	struct xfs_trans	*tp;
 
+	if (ip == mp->m_rsumip)
+		buf_type = XFS_BLFT_RTSUMMARY_BUF;
+	else
+		buf_type = XFS_BLFT_RTBITMAP_BUF;
+
 	/*
 	 * Allocate space to the file, as necessary.
 	 */
@@ -830,6 +836,8 @@ xfs_growfs_rt_alloc(
 					mp->m_bsize, 0, &bp);
 			if (error)
 				goto out_trans_cancel;
+
+			xfs_trans_buf_set_type(tp, bp, buf_type);
 			memset(bp->b_addr, 0, mp->m_sb.sb_blocksize);
 			xfs_trans_log_buf(tp, bp, 0, mp->m_sb.sb_blocksize - 1);
 			/*
Signature · 1 line
2.25.1
author maintainer
#21 lore raw

PATCH 22/132 xfs: Set xfs_buf's b_ops member when zeroing bitmap/summary files

In reply to Sasha Levin

From: Chandan Babu R <[email protected]>

[ Upstream commit c54e14d155f5fdbac73a8cd4bd2678cb252149dc ]

In xfs_growfs_rt(), we enlarge bitmap and summary files by allocating new blocks for both files. For each of the new blocks allocated, we allocate an xfs_buf, zero the payload, log the contents and commit the transaction. Hence these buffers will eventually find themselves appended to list at xfs_ail->ail_buf_list.

Later, xfs_growfs_rt() loops across all of the new blocks belonging to the bitmap inode to set the bitmap values to 1. In doing so, it allocates a new transaction and invokes the following sequence of functions,
- xfs_rtfree_range()
- xfs_rtmodify_range()
- xfs_rtbuf_get()
We pass '&xfs_rtbuf_ops' as the ops pointer to xfs_trans_read_buf().
- xfs_trans_read_buf()
We find the xfs_buf of interest in per-ag hash table, invoke xfs_buf_reverify() which ends up assigning '&xfs_rtbuf_ops' to xfs_buf->b_ops.

On the other hand, if xfs_growfs_rt_alloc() had allocated a few blocks for the bitmap inode and returned with an error, all the xfs_bufs corresponding to the new bitmap blocks that have been allocated would continue to be on xfs_ail->ail_buf_list list without ever having a non-NULL value assigned to their b_ops members. An AIL flush operation would then trigger the following warning message to be printed on the console,

XFS (loop0): _xfs_buf_ioapply: no buf ops on daddr 0x58 len 8

  00000000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  00000030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  00000040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  00000050: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  00000060: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  00000070: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  CPU: 3 PID: 449 Comm: xfsaild/loop0 Not tainted 5.8.0-rc4-chandan-00038-g4d8c2b9de9ab-dirty #37
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
  Call Trace:
   dump_stack+0x57/0x70
   _xfs_buf_ioapply+0x37c/0x3b0
   ? xfs_rw_bdev+0x1e0/0x1e0
   ? xfs_buf_delwri_submit_buffers+0xd4/0x210
   __xfs_buf_submit+0x6d/0x1f0
   xfs_buf_delwri_submit_buffers+0xd4/0x210
   xfsaild+0x2c8/0x9e0
   ? __switch_to_asm+0x42/0x70
   ? xfs_trans_ail_cursor_first+0x80/0x80
   kthread+0xfe/0x140
   ? kthread_park+0x90/0x90
   ret_from_fork+0x22/0x30

This message indicates that the xfs_buf had its b_ops member set to NULL.

This commit fixes the issue by assigning "&xfs_rtbuf_ops" to b_ops member of each of the xfs_bufs logged by xfs_growfs_rt_alloc().

---
 fs/xfs/xfs_rtalloc.c | 1 +
 1 file changed, 1 insertion(+)
fs/xfs/xfs_rtalloc.c +1 -0
index 04b953c3ffa75..48be55b18c494 100644
@@ -838,6 +838,7 @@ xfs_growfs_rt_alloc(
 				goto out_trans_cancel;
 
 			xfs_trans_buf_set_type(tp, bp, buf_type);
+			bp->b_ops = &xfs_rtbuf_ops;
 			memset(bp->b_addr, 0, mp->m_sb.sb_blocksize);
 			xfs_trans_log_buf(tp, bp, 0, mp->m_sb.sb_blocksize - 1);
 			/*
Signature · 1 line
2.25.1
author maintainer
#22 lore raw

PATCH 23/132 xfs: log new intent items created as part of finishing recovered intent items

In reply to Sasha Levin

From: "Darrick J. Wong" <[email protected]>

[ Upstream commit 93293bcbde93567efaf4e6bcd58cad270e1fcbf5 ]

During a code inspection, I found a serious bug in the log intent item recovery code when an intent item cannot complete all the work and decides to requeue itself to get that done. When this happens, the item recovery creates a new incore deferred op representing the remaining work and attaches it to the transaction that it allocated. At the end of _item_recover, it moves the entire chain of deferred ops to the dummy parent_tp that xlog_recover_process_intents passed to it, but fail to log a new intent item for the remaining work before committing the transaction for the single unit of work.

xlog_finish_defer_ops logs those new intent items once recovery has finished dealing with the intent items that it recovered, but this isn't sufficient. If the log is forced to disk after a recovered log item decides to requeue itself and the system goes down before we call xlog_finish_defer_ops, the second log recovery will never see the new intent item and therefore has no idea that there was more work to do. It will finish recovery leaving the filesystem in a corrupted state.

The same logic applies to /any/ deferred ops added during intent item recovery, not just the one handling the remaining work.

---
 fs/xfs/libxfs/xfs_defer.c  | 26 ++++++++++++++++++++++++--
 fs/xfs/libxfs/xfs_defer.h  |  6 ++++++
 fs/xfs/xfs_bmap_item.c     |  2 +-
 fs/xfs/xfs_refcount_item.c |  2 +-
 4 files changed, 32 insertions(+), 4 deletions(-)
fs/xfs/libxfs/xfs_defer.c +24 -2
index d8f586256add7..29e9762f3b77c 100644
@@ -186,8 +186,9 @@ xfs_defer_create_intent(
 {
 	const struct xfs_defer_op_type	*ops = defer_op_types[dfp->dfp_type];
 
-	dfp->dfp_intent = ops->create_intent(tp, &dfp->dfp_work,
-			dfp->dfp_count, sort);
+	if (!dfp->dfp_intent)
+		dfp->dfp_intent = ops->create_intent(tp, &dfp->dfp_work,
+						     dfp->dfp_count, sort);
 }
 
 /*
@@ -390,6 +391,7 @@ xfs_defer_finish_one(
 			list_add(li, &dfp->dfp_work);
 			dfp->dfp_count++;
 			dfp->dfp_done = NULL;
+			dfp->dfp_intent = NULL;
 			xfs_defer_create_intent(tp, dfp, false);
 		}
 
@@ -552,3 +554,23 @@ xfs_defer_move(
 
 	xfs_defer_reset(stp);
 }
+
+/*
+ * Prepare a chain of fresh deferred ops work items to be completed later.  Log
+ * recovery requires the ability to put off until later the actual finishing
+ * work so that it can process unfinished items recovered from the log in
+ * correct order.
+ *
+ * Create and log intent items for all the work that we're capturing so that we
+ * can be assured that the items will get replayed if the system goes down
+ * before log recovery gets a chance to finish the work it put off.  Then we
+ * move the chain from stp to dtp.
+ */
+void
+xfs_defer_capture(
+	struct xfs_trans	*dtp,
+	struct xfs_trans	*stp)
+{
+	xfs_defer_create_intents(stp);
+	xfs_defer_move(dtp, stp);
+}
fs/xfs/libxfs/xfs_defer.h +6 -0
index 6b2ca580f2b06..3164199162b61 100644
@@ -63,4 +63,10 @@ extern const struct xfs_defer_op_type xfs_rmap_update_defer_type;
 extern const struct xfs_defer_op_type xfs_extent_free_defer_type;
 extern const struct xfs_defer_op_type xfs_agfl_free_defer_type;
 
+/*
+ * Functions to capture a chain of deferred operations and continue them later.
+ * This doesn't normally happen except log recovery.
+ */
+void xfs_defer_capture(struct xfs_trans *dtp, struct xfs_trans *stp);
+
 #endif /* __XFS_DEFER_H__ */
fs/xfs/xfs_bmap_item.c +1 -1
index 6736c5ab188f2..98e18472e28e6 100644
@@ -534,7 +534,7 @@ xfs_bui_item_recover(
 		xfs_bmap_unmap_extent(tp, ip, &irec);
 	}
 
-	xfs_defer_move(parent_tp, tp);
+	xfs_defer_capture(parent_tp, tp);
 	error = xfs_trans_commit(tp);
 	xfs_iunlock(ip, XFS_ILOCK_EXCL);
 	xfs_irele(ip);
fs/xfs/xfs_refcount_item.c +1 -1
index c81639891e298..1b2a58b305f25 100644
@@ -554,7 +554,7 @@ xfs_cui_item_recover(
 	}
 
 	xfs_refcount_finish_one_cleanup(tp, rcur, error);
-	xfs_defer_move(parent_tp, tp);
+	xfs_defer_capture(parent_tp, tp);
 	error = xfs_trans_commit(tp);
 	return error;
 
Signature · 1 line
2.25.1
author maintainer
#23 lore raw

PATCH 24/132 power: supply: bq27xxx: report "not charging" on all types

In reply to Sasha Levin

From: Krzysztof Kozlowski <[email protected]>

[ Upstream commit 7bf738ba110722b63e9dc8af760d3fb2aef25593 ]

Commit 6f24ff97e323 ("power: supply: bq27xxx_battery: Add the BQ27Z561 Battery monitor") and commit d74534c27775 ("power:
bq27xxx_battery: Add support for additional bq27xxx family devices") added support for new device types by copying most of the code and adding necessary quirks.

However they did not copy the code in bq27xxx_battery_status() responsible for returning POWER_SUPPLY_STATUS_NOT_CHARGING.

Unify the bq27xxx_battery_status() so for all types when charger is supplied, it will return "not charging" status.

---
 drivers/power/supply/bq27xxx_battery.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
drivers/power/supply/bq27xxx_battery.c +4 -2
index 942c92127b6d5..6b6a507a401ba 100644
@@ -1678,8 +1678,6 @@ static int bq27xxx_battery_status(struct bq27xxx_device_info *di,
 			status = POWER_SUPPLY_STATUS_FULL;
 		else if (di->cache.flags & BQ27000_FLAG_CHGS)
 			status = POWER_SUPPLY_STATUS_CHARGING;
-		else if (power_supply_am_i_supplied(di->bat) > 0)
-			status = POWER_SUPPLY_STATUS_NOT_CHARGING;
 		else
 			status = POWER_SUPPLY_STATUS_DISCHARGING;
 	} else {
@@ -1691,6 +1689,10 @@ static int bq27xxx_battery_status(struct bq27xxx_device_info *di,
 			status = POWER_SUPPLY_STATUS_CHARGING;
 	}
 
+	if ((status == POWER_SUPPLY_STATUS_DISCHARGING) &&
+	    (power_supply_am_i_supplied(di->bat) > 0))
+		status = POWER_SUPPLY_STATUS_NOT_CHARGING;
+
 	val->intval = status;
 
 	return 0;
Signature · 1 line
2.25.1
author maintainer
#24 lore raw

PATCH 25/132 xfs: change the order in which child and parent defer ops are finished

In reply to Sasha Levin

From: "Darrick J. Wong" <[email protected]>

[ Upstream commit 27dada070d59c28a441f1907d2cec891b17dcb26 ]

The defer ops code has been finishing items in the wrong order -- if a top level defer op creates items A and B, and finishing item A creates more defer ops A1 and A2, we'll put the new items on the end of the chain and process them in the order A B A1 A2. This is kind of weird, since it's convenient for programmers to be able to think of A and B as an ordered sequence where all the sub-tasks for A must finish before we move on to B, e.g. A A1 A2 D.

Right now, our log intent items are not so complex that this matters, but this will become important for the atomic extent swapping patchset. In order to maintain correct reference counting of extents, we have to unmap and remap extents in that order, and we want to complete that work before moving on to the next range that the user wants to swap. This patch fixes defer ops to satsify that requirement.

The primary symptom of the incorrect order was noticed in an early performance analysis of the atomic extent swap code. An astonishingly large number of deferred work items accumulated when userspace requested an atomic update of two very fragmented files. The cause of this was traced to the same ordering bug in the inner loop of xfs_defer_finish_noroll.

If the ->finish_item method of a deferred operation queues new deferred operations, those new deferred ops are appended to the tail of the pending work list. To illustrate, say that a caller creates a transaction t0 with four deferred operations D0-D3. The first thing defer ops does is roll the transaction to t1, leaving us with:

t1: D0(t0), D1(t0), D2(t0), D3(t0)

Let's say that finishing each of D0-D3 will create two new deferred ops. After finish D0 and roll, we'll have the following chain:

t2: D1(t0), D2(t0), D3(t0), d4(t1), d5(t1)

d4 and d5 were logged to t1. Notice that while we're about to start work on D1, we haven't actually completed all the work implied by D0 being finished. So far we've been careful (or lucky) to structure the dfops callers such that D1 doesn't depend on d4 or d5 being finished, but this is a potential logic bomb.

There's a second problem lurking. Let's see what happens as we finish D1-D3:

t3: D2(t0), D3(t0), d4(t1), d5(t1), d6(t2), d7(t2)
t4: D3(t0), d4(t1), d5(t1), d6(t2), d7(t2), d8(t3), d9(t3)
t5: d4(t1), d5(t1), d6(t2), d7(t2), d8(t3), d9(t3), d10(t4), d11(t4)

Let's say that d4-d11 are simple work items that don't queue any other operations, which means that we can complete each d4 and roll to t6:

t6: d5(t1), d6(t2), d7(t2), d8(t3), d9(t3), d10(t4), d11(t4)
t7: d6(t2), d7(t2), d8(t3), d9(t3), d10(t4), d11(t4)
...
t11: d10(t4), d11(t4)
t12: d11(t4)
<done>

When we try to roll to transaction #12, we're holding defer op d11, which we logged way back in t4. This means that the tail of the log is pinned at t4. If the log is very small or there are a lot of other threads updating metadata, this means that we might have wrapped the log and cannot get roll to t11 because there isn't enough space left before we'd run into t4.

Let's shift back to the original failure. I mentioned before that I discovered this flaw while developing the atomic file update code. In that scenario, we have a defer op (D0) that finds a range of file blocks to remap, creates a handful of new defer ops to do that, and then asks to be continued with however much work remains.

So, D0 is the original swapext deferred op. The first thing defer ops does is rolls to t1:

t1: D0(t0)

We try to finish D0, logging d1 and d2 in the process, but can't get all the work done. We log a done item and a new intent item for the work that D0 still has to do, and roll to t2:

t2: D0'(t1), d1(t1), d2(t1)

We roll and try to finish D0', but still can't get all the work done, so we log a done item and a new intent item for it, requeue D0 a second time, and roll to t3:

t3: D0''(t2), d1(t1), d2(t1), d3(t2), d4(t2)

If it takes 48 more rolls to complete D0, then we'll finally dispense with D0 in t50:

t50: D<fifty primes>(t49), d1(t1), ..., d102(t50)

We then try to roll again to get a chain like this:

t51: d1(t1), d2(t1), ..., d101(t50), d102(t50)
...
t152: d102(t50)
<done>

Notice that in rolling to transaction #51, we're holding on to a log intent item for d1 that was logged in transaction #1. This means that the tail of the log is pinned at t1. If the log is very small or there are a lot of other threads updating metadata, this means that we might have wrapped the log and cannot roll to t51 because there isn't enough space left before we'd run into t1. This is of course problem #2 again.

But notice the third problem with this scenario: we have 102 defer ops tied to this transaction! Each of these items are backed by pinned kernel memory, which means that we risk OOM if the chains get too long.

Yikes. Problem #1 is a subtle logic bomb that could hit someone in the future; problem #2 applies (rarely) to the current upstream, and problem #3 applies to work under development.

This is not how incremental deferred operations were supposed to work. The dfops design of logging in the same transaction an intent-done item and a new intent item for the work remaining was to make it so that we only have to juggle enough deferred work items to finish that one small piece of work. Deferred log item recovery will find that first unfinished work item and restart it, no matter how many other intent items might follow it in the log. Therefore, it's ok to put the new intents at the start of the dfops chain.

For the first example, the chains look like this:

t2: d4(t1), d5(t1), D1(t0), D2(t0), D3(t0)
t3: d5(t1), D1(t0), D2(t0), D3(t0)
...
t9: d9(t7), D3(t0)
t10: D3(t0)
t11: d10(t10), d11(t10)
t12: d11(t10)

For the second example, the chains look like this:

t1: D0(t0)
t2: d1(t1), d2(t1), D0'(t1)
t3: d2(t1), D0'(t1)
t4: D0'(t1)
t5: d1(t4), d2(t4), D0''(t4)
...
t148: D0<50 primes>(t147)
t149: d101(t148), d102(t148)
t150: d102(t148)
<done>

This actually sucks more for pinning the log tail (we try to roll to t10 while holding an intent item that was logged in t1) but we've solved problem #1. We've also reduced the maximum chain length from:

sum(all the new items) + nr_original_items

to:

max(new items that each original item creates) + nr_original_items

This solves problem #3 by sharply reducing the number of defer ops that can be attached to a transaction at any given time. The change makes the problem of log tail pinning worse, but is improvement we need to solve problem #2. Actually solving #2, however, is left to the next patch.

Note that a subsequent analysis of some hard-to-trigger reflink and COW livelocks on extremely fragmented filesystems (or systems running a lot of IO threads) showed the same symptoms -- uncomfortably large numbers of incore deferred work items and occasional stalls in the transaction grant code while waiting for log reservations. I think this patch and the next one will also solve these problems.

As originally written, the code used list_splice_tail_init instead of list_splice_init, so change that, and leave a short comment explaining our actions.

---
 fs/xfs/libxfs/xfs_defer.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)
fs/xfs/libxfs/xfs_defer.c +10 -1
index 29e9762f3b77c..4959d8a32b606 100644
@@ -430,8 +430,17 @@ xfs_defer_finish_noroll(
 
 	/* Until we run out of pending work to finish... */
 	while (!list_empty(&dop_pending) || !list_empty(&(*tp)->t_dfops)) {
+		/*
+		 * Deferred items that are created in the process of finishing
+		 * other deferred work items should be queued at the head of
+		 * the pending list, which puts them ahead of the deferred work
+		 * that was created by the caller.  This keeps the number of
+		 * pending work items to a minimum, which decreases the amount
+		 * of time that any one intent item can stick around in memory,
+		 * pinning the log tail.
+		 */
 		xfs_defer_create_intents(*tp);
-		list_splice_tail_init(&(*tp)->t_dfops, &dop_pending);
+		list_splice_init(&(*tp)->t_dfops, &dop_pending);
 
 		error = xfs_defer_trans_roll(tp);
 		if (error)
Signature · 1 line
2.25.1
author maintainer
#25 lore raw

PATCH 26/132 xfs: fix realtime bitmap/summary file truncation when growing rt volume

In reply to Sasha Levin

From: "Darrick J. Wong" <[email protected]>

[ Upstream commit f4c32e87de7d66074d5612567c5eac7325024428 ]

The realtime bitmap and summary files are regular files that are hidden away from the directory tree. Since they're regular files, inode inactivation will try to purge what it thinks are speculative preallocations beyond the incore size of the file. Unfortunately, xfs_growfs_rt forgets to update the incore size when it resizes the inodes, with the result that inactivating the rt inodes at unmount time will cause their contents to be truncated.

Fix this by updating the incore size when we change the ondisk size as part of updating the superblock. Note that we don't do this when we're allocating blocks to the rt inodes because we actually want those blocks to get purged if the growfs fails.

This fixes corruption complaints from the online rtsummary checker when running xfs/233. Since that test requires rmap, one can also trigger this by growing an rt volume, cycling the mount, and creating rt files.

---
 fs/xfs/xfs_rtalloc.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)
fs/xfs/xfs_rtalloc.c +8 -2
index 48be55b18c494..3ecbf859d3522 100644
@@ -1016,10 +1016,13 @@ xfs_growfs_rt(
 		xfs_ilock(mp->m_rbmip, XFS_ILOCK_EXCL);
 		xfs_trans_ijoin(tp, mp->m_rbmip, XFS_ILOCK_EXCL);
 		/*
-		 * Update the bitmap inode's size.
+		 * Update the bitmap inode's size ondisk and incore.  We need
+		 * to update the incore size so that inode inactivation won't
+		 * punch what it thinks are "posteof" blocks.
 		 */
 		mp->m_rbmip->i_d.di_size =
 			nsbp->sb_rbmblocks * nsbp->sb_blocksize;
+		i_size_write(VFS_I(mp->m_rbmip), mp->m_rbmip->i_d.di_size);
 		xfs_trans_log_inode(tp, mp->m_rbmip, XFS_ILOG_CORE);
 		/*
 		 * Get the summary inode into the transaction.
@@ -1027,9 +1030,12 @@ xfs_growfs_rt(
 		xfs_ilock(mp->m_rsumip, XFS_ILOCK_EXCL);
 		xfs_trans_ijoin(tp, mp->m_rsumip, XFS_ILOCK_EXCL);
 		/*
-		 * Update the summary inode's size.
+		 * Update the summary inode's size.  We need to update the
+		 * incore size so that inode inactivation won't punch what it
+		 * thinks are "posteof" blocks.
 		 */
 		mp->m_rsumip->i_d.di_size = nmp->m_rsumsize;
+		i_size_write(VFS_I(mp->m_rsumip), mp->m_rsumip->i_d.di_size);
 		xfs_trans_log_inode(tp, mp->m_rsumip, XFS_ILOG_CORE);
 		/*
 		 * Copy summary data from old to new sizes.
Signature · 1 line
2.25.1
author maintainer
#26 lore raw

PATCH 27/132 ath10k: fix retry packets update in station dump

In reply to Sasha Levin

From: Venkateswara Naralasetty <[email protected]>

[ Upstream commit 67b927f9820847d30e97510b2f00cd142b9559b6 ]

When tx status enabled, retry count is updated from tx completion status. which is not working as expected due to firmware limitation where firmware can not provide per MSDU rate statistics from tx completion status. Due to this tx retry count is always 0 in station dump.

Fix this issue by updating the retry packet count from per peer statistics. This patch will not break on SDIO devices since, this retry count is already updating from peer statistics for SDIO devices.

Tested-on: QCA9984 PCI 10.4-3.6-00104
Tested-on: QCA9882 PCI 10.2.4-1.0-00047

---
 drivers/net/wireless/ath/ath10k/htt_rx.c | 8 +++++---
 drivers/net/wireless/ath/ath10k/mac.c    | 5 +++--
 2 files changed, 8 insertions(+), 5 deletions(-)
drivers/net/wireless/ath/ath10k/htt_rx.c +5 -3
index d787cbead56ab..cac05e7bb6b07 100644
@@ -3575,12 +3575,14 @@ ath10k_update_per_peer_tx_stats(struct ath10k *ar,
 	}
 
 	if (ar->htt.disable_tx_comp) {
-		arsta->tx_retries += peer_stats->retry_pkts;
 		arsta->tx_failed += peer_stats->failed_pkts;
-		ath10k_dbg(ar, ATH10K_DBG_HTT, "htt tx retries %d tx failed %d\n",
-			   arsta->tx_retries, arsta->tx_failed);
+		ath10k_dbg(ar, ATH10K_DBG_HTT, "tx failed %d\n",
+			   arsta->tx_failed);
 	}
 
+	arsta->tx_retries += peer_stats->retry_pkts;
+	ath10k_dbg(ar, ATH10K_DBG_HTT, "htt tx retries %d", arsta->tx_retries);
+
 	if (ath10k_debug_is_extd_tx_stats_enabled(ar))
 		ath10k_accumulate_per_peer_tx_stats(ar, arsta, peer_stats,
 						    rate_idx);
drivers/net/wireless/ath/ath10k/mac.c +3 -2
index 919d15584d4a2..d9d4b15a6d81c 100644
@@ -8547,12 +8547,13 @@ static void ath10k_sta_statistics(struct ieee80211_hw *hw,
 	sinfo->filled |= BIT_ULL(NL80211_STA_INFO_TX_BITRATE);
 
 	if (ar->htt.disable_tx_comp) {
-		sinfo->tx_retries = arsta->tx_retries;
-		sinfo->filled |= BIT_ULL(NL80211_STA_INFO_TX_RETRIES);
 		sinfo->tx_failed = arsta->tx_failed;
 		sinfo->filled |= BIT_ULL(NL80211_STA_INFO_TX_FAILED);
 	}
 
+	sinfo->tx_retries = arsta->tx_retries;
+	sinfo->filled |= BIT_ULL(NL80211_STA_INFO_TX_RETRIES);
+
 	ath10k_mac_sta_get_peer_stats_info(ar, sta, sinfo);
 }
 
Signature · 1 line
2.25.1
author maintainer
#27 lore raw

PATCH 28/132 x86/kaslr: Initialize mem_limit to the real maximum address

In reply to Sasha Levin

From: Arvind Sankar <[email protected]>

[ Upstream commit 451286940d95778e83fa7f97006316d995b4c4a8 ]

On 64-bit, the kernel must be placed below MAXMEM (64TiB with 4-level paging or 4PiB with 5-level paging). This is currently not enforced by KASLR, which thus implicitly relies on physical memory being limited to less than 64TiB.

On 32-bit, the limit is KERNEL_IMAGE_SIZE (512MiB). This is enforced by special checks in __process_mem_region().

Initialize mem_limit to the maximum (depending on architecture), instead of ULLONG_MAX, and make sure the command-line arguments can only decrease it. This makes the enforcement explicit on 64-bit, and eliminates the 32-bit specific checks to keep the kernel below 512M.

Check upfront to make sure the minimum address is below the limit before doing any work.

---
 arch/x86/boot/compressed/kaslr.c | 41 +++++++++++++++++---------------
 1 file changed, 22 insertions(+), 19 deletions(-)
arch/x86/boot/compressed/kaslr.c +22 -19
index d7408af557386..b59592273c329 100644
@@ -94,8 +94,11 @@ static unsigned long get_boot_seed(void)
 static bool memmap_too_large;
 
 
-/* Store memory limit specified by "mem=nn[KMG]" or "memmap=nn[KMG]" */
-static unsigned long long mem_limit = ULLONG_MAX;
+/*
+ * Store memory limit: MAXMEM on 64-bit and KERNEL_IMAGE_SIZE on 32-bit.
+ * It may be reduced by "mem=nn[KMG]" or "memmap=nn[KMG]" command line options.
+ */
+static unsigned long long mem_limit;
 
 /* Number of immovable memory regions */
 static int num_immovable_mem;
@@ -221,7 +224,7 @@ static void mem_avoid_memmap(enum parse_mode mode, char *str)
 
 		if (start == 0) {
 			/* Store the specified memory limit if size > 0 */
-			if (size > 0)
+			if (size > 0 && size < mem_limit)
 				mem_limit = size;
 
 			continue;
@@ -309,7 +312,8 @@ static void handle_mem_options(void)
 			if (mem_size == 0)
 				goto out;
 
-			mem_limit = mem_size;
+			if (mem_size < mem_limit)
+				mem_limit = mem_size;
 		} else if (!strcmp(param, "efi_fake_mem")) {
 			mem_avoid_memmap(PARSE_EFI, val);
 		}
@@ -321,7 +325,9 @@ static void handle_mem_options(void)
 }
 
 /*
- * In theory, KASLR can put the kernel anywhere in the range of [16M, 64T).
+ * In theory, KASLR can put the kernel anywhere in the range of [16M, MAXMEM)
+ * on 64-bit, and [16M, KERNEL_IMAGE_SIZE) on 32-bit.
+ *
  * The mem_avoid array is used to store the ranges that need to be avoided
  * when KASLR searches for an appropriate random address. We must avoid any
  * regions that are unsafe to overlap with during decompression, and other
@@ -621,10 +627,6 @@ static void __process_mem_region(struct mem_vector *entry,
 	unsigned long start_orig, end;
 	struct mem_vector cur_entry;
 
-	/* On 32-bit, ignore entries entirely above our maximum. */
-	if (IS_ENABLED(CONFIG_X86_32) && entry->start >= KERNEL_IMAGE_SIZE)
-		return;
-
 	/* Ignore entries entirely below our minimum. */
 	if (entry->start + entry->size < minimum)
 		return;
@@ -657,11 +659,6 @@ static void __process_mem_region(struct mem_vector *entry,
 		/* Reduce size by any delta from the original address. */
 		region.size -= region.start - start_orig;
 
-		/* On 32-bit, reduce region size to fit within max size. */
-		if (IS_ENABLED(CONFIG_X86_32) &&
-		    region.start + region.size > KERNEL_IMAGE_SIZE)
-			region.size = KERNEL_IMAGE_SIZE - region.start;
-
 		/* Return if region can't contain decompressed kernel */
 		if (region.size < image_size)
 			return;
@@ -846,15 +843,16 @@ static void process_e820_entries(unsigned long minimum,
 static unsigned long find_random_phys_addr(unsigned long minimum,
 					   unsigned long image_size)
 {
+	/* Bail out early if it's impossible to succeed. */
+	if (minimum + image_size > mem_limit)
+		return 0;
+
 	/* Check if we had too many memmaps. */
 	if (memmap_too_large) {
 		debug_putstr("Aborted memory entries scan (more than 4 memmap= args)!\n");
 		return 0;
 	}
 
-	/* Make sure minimum is aligned. */
-	minimum = ALIGN(minimum, CONFIG_PHYSICAL_ALIGN);
-
 	if (process_efi_entries(minimum, image_size))
 		return slots_fetch_random();
 
@@ -867,8 +865,6 @@ static unsigned long find_random_virt_addr(unsigned long minimum,
 {
 	unsigned long slots, random_addr;
 
-	/* Make sure minimum is aligned. */
-	minimum = ALIGN(minimum, CONFIG_PHYSICAL_ALIGN);
 	/* Align image_size for easy slot calculations. */
 	image_size = ALIGN(image_size, CONFIG_PHYSICAL_ALIGN);
 
@@ -915,6 +911,11 @@ void choose_random_location(unsigned long input,
 	/* Prepare to add new identity pagetables on demand. */
 	initialize_identity_maps();
 
+	if (IS_ENABLED(CONFIG_X86_32))
+		mem_limit = KERNEL_IMAGE_SIZE;
+	else
+		mem_limit = MAXMEM;
+
 	/* Record the various known unsafe memory ranges. */
 	mem_avoid_init(input, input_size, *output);
 
@@ -924,6 +925,8 @@ void choose_random_location(unsigned long input,
 	 * location:
 	 */
 	min_addr = min(*output, 512UL << 20);
+	/* Make sure minimum is aligned. */
+	min_addr = ALIGN(min_addr, CONFIG_PHYSICAL_ALIGN);
 
 	/* Walk available memory entries to find a random address. */
 	random_addr = find_random_phys_addr(min_addr, output_size);
Signature · 1 line
2.25.1
author maintainer
#28 lore raw

PATCH 29/132 drm/amdgpu: restore ras flags when user resets eeprom(v2)

In reply to Sasha Levin

From: Guchun Chen <[email protected]>

[ Upstream commit bf0b91b78f002faa1be1902a75eeb0797f9fbcf3 ]

RAS flags needs to be cleaned as well when user requires one clean eeprom.

v2: RAS flags shall be restored after eeprom reset succeeds.

---
 drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c | 13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)
drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c +10 -3
index 3f47f35eedff1..50fc974655f0d 100644
@@ -364,12 +364,19 @@ static ssize_t amdgpu_ras_debugfs_ctrl_write(struct file *f, const char __user *
 static ssize_t amdgpu_ras_debugfs_eeprom_write(struct file *f, const char __user *buf,
 		size_t size, loff_t *pos)
 {
-	struct amdgpu_device *adev = (struct amdgpu_device *)file_inode(f)->i_private;
+	struct amdgpu_device *adev =
+		(struct amdgpu_device *)file_inode(f)->i_private;
 	int ret;
 
-	ret = amdgpu_ras_eeprom_reset_table(&adev->psp.ras.ras->eeprom_control);
+	ret = amdgpu_ras_eeprom_reset_table(
+			&(amdgpu_ras_get_context(adev)->eeprom_control));
 
-	return ret == 1 ? size : -EIO;
+	if (ret == 1) {
+		amdgpu_ras_get_context(adev)->flags = RAS_DEFAULT_FLAGS;
+		return size;
+	} else {
+		return -EIO;
+	}
 }
 
 static const struct file_operations amdgpu_ras_debugfs_ctrl_ops = {
Signature · 6 lines
2.25.1

_______________________________________________
amd-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
author maintainer
#29 lore raw

PATCH 30/132 video: fbdev: pvr2fb: initialize variables

In reply to Sasha Levin

From: Tom Rix <[email protected]>

[ Upstream commit 8e1ba47c60bcd325fdd097cd76054639155e5d2e ]

clang static analysis reports this repesentative error

pvr2fb.c:1049:2: warning: 1st function call argument
is an uninitialized value [core.CallAndMessage]

        if (*cable_arg)
        ^~~~~~~~~~~~~~~

Problem is that cable_arg depends on the input loop to set the cable_arg[0]. If it does not, then some random value from the stack is used.

A similar problem exists for output_arg.

So initialize cable_arg and output_arg.

---
 drivers/video/fbdev/pvr2fb.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/video/fbdev/pvr2fb.c +2 -0
index f18d457175d90..2f045c356882a 100644
@@ -1016,6 +1016,8 @@ static int __init pvr2fb_setup(char *options)
 	if (!options || !*options)
 		return 0;
 
+	cable_arg[0] = output_arg[0] = 0;
+
 	while ((this_opt = strsep(&options, ","))) {
 		if (!*this_opt)
 			continue;
Signature · 1 line
2.25.1
author maintainer
#30 lore raw

PATCH 31/132 ath10k: start recovery process when payload length exceeds max htc length for sdio

In reply to Sasha Levin

From: Wen Gong <[email protected]>

[ Upstream commit 2fd3c8f34d08af0a6236085f9961866ad92ef9ec ]

When simulate random transfer fail for sdio write and read, it happened "payload length exceeds max htc length" and recovery later sometimes.

Test steps:
1. Add config and update kernel:
CONFIG_FAIL_MMC_REQUEST=y
CONFIG_FAULT_INJECTION=y
CONFIG_FAULT_INJECTION_DEBUG_FS=y

2. Run simulate fail:
cd /sys/kernel/debug/mmc1/fail_mmc_request
echo 10 > probability
echo 10 > times # repeat until hitting issues

3. It happened payload length exceeds max htc length.

[  199.935506] ath10k_sdio mmc1:0001:1: payload length 57005 exceeds max htc length: 4088
....
[  264.990191] ath10k_sdio mmc1:0001:1: payload length 57005 exceeds max htc length: 4088

4. after some time, such as 60 seconds, it start recovery which triggered by wmi command timeout for periodic scan.

[  269.229232] ieee80211 phy0: Hardware restart was requested
[  269.734693] ath10k_sdio mmc1:0001:1: device successfully recovered

The simulate fail of sdio is not a real sdio transter fail, it only set an error status in mmc_should_fail_request after the transfer end, actually the transfer is success, then sdio_io_rw_ext_helper will return error status and stop transfer the left data. For example, the really RX len is 286 bytes, then it will split to 2 blocks in sdio_io_rw_ext_helper, one is 256 bytes, left is 30 bytes, if the first 256 bytes get an error status by mmc_should_fail_request,then the left 30 bytes will not read in this RX operation. Then when the next RX arrive, the left 30 bytes will be considered as the header of the read, the top 4 bytes of the 30 bytes will be considered as lookaheads, but actually the 4 bytes is not the lookaheads, so the len from this lookaheads is not correct, it exceeds max htc length 4088 sometimes. When happened exceeds, the buffer chain is not matched between firmware and ath10k, then it need to start recovery ASAP. Recently then recovery will be started by wmi command timeout, but it will be long time later, for example, it is 60+ seconds later from the periodic scan, if it does not have periodic scan, it will be longer.

Start recovery when it happened "payload length exceeds max htc length" will be reasonable.

This patch only effect sdio chips.

Tested with QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00029.

---
 drivers/net/wireless/ath/ath10k/sdio.c | 4 ++++
 1 file changed, 4 insertions(+)
drivers/net/wireless/ath/ath10k/sdio.c +4 -0
index 63f882c690bff..0841e69b10b1a 100644
@@ -557,6 +557,10 @@ static int ath10k_sdio_mbox_rx_alloc(struct ath10k *ar,
 				    le16_to_cpu(htc_hdr->len),
 				    ATH10K_HTC_MBOX_MAX_PAYLOAD_LENGTH);
 			ret = -ENOMEM;
+
+			queue_work(ar->workqueue, &ar->restart_work);
+			ath10k_warn(ar, "exceeds length, start recovery\n");
+
 			goto err;
 		}
 
Signature · 7 lines
2.25.1


_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
author maintainer
#31 lore raw

PATCH 32/132 ath10k: fix VHT NSS calculation when STBC is enabled

In reply to Sasha Levin

From: Sathishkumar Muruganandam <[email protected]>

[ Upstream commit 99f41b8e43b8b4b31262adb8ac3e69088fff1289 ]

When STBC is enabled, NSTS_SU value need to be accounted for VHT NSS calculation for SU case.

Without this fix, 1SS + STBC enabled case was reported wrongly as 2SS in radiotap header on monitor mode capture.

Tested-on: QCA9984 10.4-3.10-00047

---
 drivers/net/wireless/ath/ath10k/htt_rx.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)
drivers/net/wireless/ath/ath10k/htt_rx.c +7 -1
index cac05e7bb6b07..65fbc5957f94d 100644
@@ -941,6 +941,7 @@ static void ath10k_htt_rx_h_rates(struct ath10k *ar,
 	u8 preamble = 0;
 	u8 group_id;
 	u32 info1, info2, info3;
+	u32 stbc, nsts_su;
 
 	info1 = __le32_to_cpu(rxd->ppdu_start.info1);
 	info2 = __le32_to_cpu(rxd->ppdu_start.info2);
@@ -985,11 +986,16 @@ static void ath10k_htt_rx_h_rates(struct ath10k *ar,
 		 */
 		bw = info2 & 3;
 		sgi = info3 & 1;
+		stbc = (info2 >> 3) & 1;
 		group_id = (info2 >> 4) & 0x3F;
 
 		if (GROUP_ID_IS_SU_MIMO(group_id)) {
 			mcs = (info3 >> 4) & 0x0F;
-			nss = ((info2 >> 10) & 0x07) + 1;
+			nsts_su = ((info2 >> 10) & 0x07);
+			if (stbc)
+				nss = (nsts_su >> 2) + 1;
+			else
+				nss = (nsts_su + 1);
 		} else {
 			/* Hardware doesn't decode VHT-SIG-B into Rx descriptor
 			 * so it's impossible to decode MCS. Also since
Signature · 7 lines
2.25.1


_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
author maintainer
#32 lore raw

PATCH 33/132 drm/scheduler: Scheduler priority fixes (v2)

In reply to Sasha Levin

From: Luben Tuikov <[email protected]>

[ Upstream commit e2d732fdb7a9e421720a644580cd6a9400f97f60 ]

Remove DRM_SCHED_PRIORITY_LOW, as it was used in only one place.

Rename and separate by a line DRM_SCHED_PRIORITY_MAX to DRM_SCHED_PRIORITY_COUNT as it represents a (total) count of said priorities and it is used as such in loops throughout the code. (0-based indexing is the the count number.)

Remove redundant word HIGH in priority names, and rename *KERNEL* to *HIGH*, as it really means that, high.

v2: Add back KERNEL and remove SW and HW,
in lieu of a single HIGH between NORMAL and KERNEL.

---
 drivers/gpu/drm/amd/amdgpu/amdgpu_ctx.c   |  4 ++--
 drivers/gpu/drm/amd/amdgpu/amdgpu_job.c   |  2 +-
 drivers/gpu/drm/amd/amdgpu/amdgpu_ring.c  |  2 +-
 drivers/gpu/drm/amd/amdgpu/amdgpu_ring.h  |  2 +-
 drivers/gpu/drm/amd/amdgpu/amdgpu_sched.c |  6 +++---
 drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c   |  2 +-
 drivers/gpu/drm/scheduler/sched_main.c    |  4 ++--
 include/drm/gpu_scheduler.h               | 12 +++++++-----
 8 files changed, 18 insertions(+), 16 deletions(-)
drivers/gpu/drm/amd/amdgpu/amdgpu_ctx.c +2 -2
index 8842c55d4490b..fc695126b6e75 100644
@@ -46,7 +46,7 @@ const unsigned int amdgpu_ctx_num_entities[AMDGPU_HW_IP_NUM] = {
 static int amdgpu_ctx_priority_permit(struct drm_file *filp,
 				      enum drm_sched_priority priority)
 {
-	if (priority < 0 || priority >= DRM_SCHED_PRIORITY_MAX)
+	if (priority < 0 || priority >= DRM_SCHED_PRIORITY_COUNT)
 		return -EINVAL;
 
 	/* NORMAL and below are accessible by everyone */
@@ -65,7 +65,7 @@ static int amdgpu_ctx_priority_permit(struct drm_file *filp,
 static enum gfx_pipe_priority amdgpu_ctx_sched_prio_to_compute_prio(enum drm_sched_priority prio)
 {
 	switch (prio) {
-	case DRM_SCHED_PRIORITY_HIGH_HW:
+	case DRM_SCHED_PRIORITY_HIGH:
 	case DRM_SCHED_PRIORITY_KERNEL:
 		return AMDGPU_GFX_PIPE_PRIO_HIGH;
 	default:
drivers/gpu/drm/amd/amdgpu/amdgpu_job.c +1 -1
index 4fb4c3b696876..635a7a21d15b2 100644
@@ -254,7 +254,7 @@ void amdgpu_job_stop_all_jobs_on_sched(struct drm_gpu_scheduler *sched)
 	int i;
 
 	/* Signal all jobs not yet scheduled */
-	for (i = DRM_SCHED_PRIORITY_MAX - 1; i >= DRM_SCHED_PRIORITY_MIN; i--) {
+	for (i = DRM_SCHED_PRIORITY_COUNT - 1; i >= DRM_SCHED_PRIORITY_MIN; i--) {
 		struct drm_sched_rq *rq = &sched->sched_rq[i];
 
 		if (!rq)
drivers/gpu/drm/amd/amdgpu/amdgpu_ring.c +1 -1
index 13ea8ebc421c6..6d4fc79bf84aa 100644
@@ -267,7 +267,7 @@ int amdgpu_ring_init(struct amdgpu_device *adev, struct amdgpu_ring *ring,
 			&ring->sched;
 	}
 
-	for (i = 0; i < DRM_SCHED_PRIORITY_MAX; ++i)
+	for (i = DRM_SCHED_PRIORITY_MIN; i < DRM_SCHED_PRIORITY_COUNT; ++i)
 		atomic_set(&ring->num_jobs[i], 0);
 
 	return 0;
drivers/gpu/drm/amd/amdgpu/amdgpu_ring.h +1 -1
index be218754629ab..5f31a33dbd525 100644
@@ -242,7 +242,7 @@ struct amdgpu_ring {
 	bool			has_compute_vm_bug;
 	bool			no_scheduler;
 
-	atomic_t		num_jobs[DRM_SCHED_PRIORITY_MAX];
+	atomic_t		num_jobs[DRM_SCHED_PRIORITY_COUNT];
 	struct mutex		priority_mutex;
 	/* protected by priority_mutex */
 	int			priority;
drivers/gpu/drm/amd/amdgpu/amdgpu_sched.c +3 -3
index c799691dfa848..17661ede94885 100644
@@ -36,14 +36,14 @@ enum drm_sched_priority amdgpu_to_sched_priority(int amdgpu_priority)
 {
 	switch (amdgpu_priority) {
 	case AMDGPU_CTX_PRIORITY_VERY_HIGH:
-		return DRM_SCHED_PRIORITY_HIGH_HW;
+		return DRM_SCHED_PRIORITY_HIGH;
 	case AMDGPU_CTX_PRIORITY_HIGH:
-		return DRM_SCHED_PRIORITY_HIGH_SW;
+		return DRM_SCHED_PRIORITY_HIGH;
 	case AMDGPU_CTX_PRIORITY_NORMAL:
 		return DRM_SCHED_PRIORITY_NORMAL;
 	case AMDGPU_CTX_PRIORITY_LOW:
 	case AMDGPU_CTX_PRIORITY_VERY_LOW:
-		return DRM_SCHED_PRIORITY_LOW;
+		return DRM_SCHED_PRIORITY_MIN;
 	case AMDGPU_CTX_PRIORITY_UNSET:
 		return DRM_SCHED_PRIORITY_UNSET;
 	default:
drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c +1 -1
index 9a3267f06376f..d63846f6900d0 100644
@@ -2065,7 +2065,7 @@ void amdgpu_ttm_set_buffer_funcs_status(struct amdgpu_device *adev, bool enable)
 		ring = adev->mman.buffer_funcs_ring;
 		sched = &ring->sched;
 		r = drm_sched_entity_init(&adev->mman.entity,
-				          DRM_SCHED_PRIORITY_KERNEL, &sched,
+					  DRM_SCHED_PRIORITY_KERNEL, &sched,
 					  1, NULL);
 		if (r) {
 			DRM_ERROR("Failed setting up TTM BO move entity (%d)\n",
drivers/gpu/drm/scheduler/sched_main.c +2 -2
index 2f319102ae9f7..19f381e5e6618 100644
@@ -623,7 +623,7 @@ drm_sched_select_entity(struct drm_gpu_scheduler *sched)
 		return NULL;
 
 	/* Kernel run queue has higher priority than normal run queue*/
-	for (i = DRM_SCHED_PRIORITY_MAX - 1; i >= DRM_SCHED_PRIORITY_MIN; i--) {
+	for (i = DRM_SCHED_PRIORITY_COUNT - 1; i >= DRM_SCHED_PRIORITY_MIN; i--) {
 		entity = drm_sched_rq_select_entity(&sched->sched_rq[i]);
 		if (entity)
 			break;
@@ -851,7 +851,7 @@ int drm_sched_init(struct drm_gpu_scheduler *sched,
 	sched->name = name;
 	sched->timeout = timeout;
 	sched->hang_limit = hang_limit;
-	for (i = DRM_SCHED_PRIORITY_MIN; i < DRM_SCHED_PRIORITY_MAX; i++)
+	for (i = DRM_SCHED_PRIORITY_MIN; i < DRM_SCHED_PRIORITY_COUNT; i++)
 		drm_sched_rq_init(sched, &sched->sched_rq[i]);
 
 	init_waitqueue_head(&sched->wake_up_worker);
include/drm/gpu_scheduler.h +7 -5
index a21b3b92135a6..b30026ccd564b 100644
@@ -33,14 +33,16 @@
 struct drm_gpu_scheduler;
 struct drm_sched_rq;
 
+/* These are often used as an (initial) index
+ * to an array, and as such should start at 0.
+ */
 enum drm_sched_priority {
 	DRM_SCHED_PRIORITY_MIN,
-	DRM_SCHED_PRIORITY_LOW = DRM_SCHED_PRIORITY_MIN,
 	DRM_SCHED_PRIORITY_NORMAL,
-	DRM_SCHED_PRIORITY_HIGH_SW,
-	DRM_SCHED_PRIORITY_HIGH_HW,
+	DRM_SCHED_PRIORITY_HIGH,
 	DRM_SCHED_PRIORITY_KERNEL,
-	DRM_SCHED_PRIORITY_MAX,
+
+	DRM_SCHED_PRIORITY_COUNT,
 	DRM_SCHED_PRIORITY_INVALID = -1,
 	DRM_SCHED_PRIORITY_UNSET = -2
 };
@@ -274,7 +276,7 @@ struct drm_gpu_scheduler {
 	uint32_t			hw_submission_limit;
 	long				timeout;
 	const char			*name;
-	struct drm_sched_rq		sched_rq[DRM_SCHED_PRIORITY_MAX];
+	struct drm_sched_rq		sched_rq[DRM_SCHED_PRIORITY_COUNT];
 	wait_queue_head_t		wake_up_worker;
 	wait_queue_head_t		job_scheduled;
 	atomic_t			hw_rq_count;
Signature · 6 lines
2.25.1

_______________________________________________
amd-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
author maintainer
#33 lore raw

PATCH 34/132 drm/brige/megachips: Add checking if ge_b850v3_lvds_init() is working correctly

In reply to Sasha Levin

From: Nadezda Lutovinova <[email protected]>

[ Upstream commit f688a345f0d7a6df4dd2aeca8e4f3c05e123a0ee ]

If ge_b850v3_lvds_init() does not allocate memory for ge_b850v3_lvds_ptr, then a null pointer dereference is accessed.

The patch adds checking of the return value of ge_b850v3_lvds_init().

Found by Linux Driver Verification project (linuxtesting.org).

---
 .../gpu/drm/bridge/megachips-stdpxxxx-ge-b850v3-fw.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)
drivers/gpu/drm/bridge/megachips-stdpxxxx-ge-b850v3-fw.c +10 -2
index 6200f12a37e69..ab8174831cf40 100644
@@ -302,8 +302,12 @@ static int stdp4028_ge_b850v3_fw_probe(struct i2c_client *stdp4028_i2c,
 				       const struct i2c_device_id *id)
 {
 	struct device *dev = &stdp4028_i2c->dev;
+	int ret;
+
+	ret = ge_b850v3_lvds_init(dev);
 
-	ge_b850v3_lvds_init(dev);
+	if (ret)
+		return ret;
 
 	ge_b850v3_lvds_ptr->stdp4028_i2c = stdp4028_i2c;
 	i2c_set_clientdata(stdp4028_i2c, ge_b850v3_lvds_ptr);
@@ -361,8 +365,12 @@ static int stdp2690_ge_b850v3_fw_probe(struct i2c_client *stdp2690_i2c,
 				       const struct i2c_device_id *id)
 {
 	struct device *dev = &stdp2690_i2c->dev;
+	int ret;
+
+	ret = ge_b850v3_lvds_init(dev);
 
-	ge_b850v3_lvds_init(dev);
+	if (ret)
+		return ret;
 
 	ge_b850v3_lvds_ptr->stdp2690_i2c = stdp2690_i2c;
 	i2c_set_clientdata(stdp2690_i2c, ge_b850v3_lvds_ptr);
Signature · 6 lines
2.25.1

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
author maintainer
#34 lore raw

PATCH 35/132 ASoC: SOF: fix a runtime pm issue in SOF when HDMI codec doesn't work

In reply to Sasha Levin

From: Rander Wang <[email protected]>

[ Upstream commit 6c63c954e1c52f1262f986f36d95f557c6f8fa94 ]

When hda_codec_probe() doesn't initialize audio component, we disable the codec and keep going. However,the resources are not released. The child_count of SOF device is increased in snd_hdac_ext_bus_device_init but is not decrease in error case, so SOF can't get suspended.

snd_hdac_ext_bus_device_exit will be invoked in HDA framework if it gets a error. Now copy this behavior to release resources and decrease SOF device child_count to release SOF device.

---
 sound/soc/sof/intel/hda-codec.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
sound/soc/sof/intel/hda-codec.c +2 -2
index 2c5c451fa19d7..c475955c6eeba 100644
@@ -151,7 +151,7 @@ static int hda_codec_probe(struct snd_sof_dev *sdev, int address,
 		if (!hdev->bus->audio_component) {
 			dev_dbg(sdev->dev,
 				"iDisp hw present but no driver\n");
-			return -ENOENT;
+			goto error;
 		}
 		hda_priv->need_display_power = true;
 	}
@@ -174,7 +174,7 @@ static int hda_codec_probe(struct snd_sof_dev *sdev, int address,
 		 * other return codes without modification
 		 */
 		if (ret == 0)
-			ret = -ENOENT;
+			goto error;
 	}
 
 	return ret;
Signature · 1 line
2.25.1
author maintainer
#35 lore raw

PATCH 36/132 selftests/x86/fsgsbase: Reap a forgotten child

In reply to Sasha Levin

From: Andy Lutomirski <[email protected]>

[ Upstream commit ab2dd173330a3f07142e68cd65682205036cd00f ]

The ptrace() test forgot to reap its child. Reap it.

---
 tools/testing/selftests/x86/fsgsbase.c | 3 +++
 1 file changed, 3 insertions(+)
tools/testing/selftests/x86/fsgsbase.c +3 -0
index 15a329da59fa3..5f3aea210e018 100644
@@ -499,6 +499,9 @@ static void test_ptrace_write_gsbase(void)
 
 END:
 	ptrace(PTRACE_CONT, child, NULL, NULL);
+	wait(&status);
+	if (!WIFEXITED(status))
+		printf("[WARN]\tChild didn't exit cleanly.\n");
 }
 
 int main()
Signature · 1 line
2.25.1
author maintainer
#36 lore raw

PATCH 37/132 drm/bridge_connector: Set default status connected for eDP connectors

In reply to Sasha Levin

From: Enric Balletbo i Serra <[email protected]>

[ Upstream commit c5589b39549d1875bb506da473bf4580c959db8c ]

In an eDP application, HPD is not required and on most bridge chips useless. If HPD is not used, we need to set initial status as connected, otherwise the connector created by the drm_bridge_connector API remains in an unknown state.

---
 drivers/gpu/drm/drm_bridge_connector.c | 1 +
 1 file changed, 1 insertion(+)
drivers/gpu/drm/drm_bridge_connector.c +1 -0
index c6994fe673f31..a58cbde59c34a 100644
@@ -187,6 +187,7 @@ drm_bridge_connector_detect(struct drm_connector *connector, bool force)
 		case DRM_MODE_CONNECTOR_DPI:
 		case DRM_MODE_CONNECTOR_LVDS:
 		case DRM_MODE_CONNECTOR_DSI:
+		case DRM_MODE_CONNECTOR_eDP:
 			status = connector_status_connected;
 			break;
 		default:
Signature · 6 lines
2.25.1

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
author maintainer
#37 lore raw

PATCH 38/132 media: videodev2.h: RGB BT2020 and HSV are always full range

In reply to Sasha Levin

From: Hans Verkuil <[email protected]>

[ Upstream commit b305dfe2e93434b12d438434461b709641f62af4 ]

The default RGB quantization range for BT.2020 is full range (just as for all the other RGB pixel encodings), not limited range.

Update the V4L2_MAP_QUANTIZATION_DEFAULT macro and documentation accordingly.

Also mention that HSV is always full range and cannot be limited range.

When RGB BT2020 was introduced in V4L2 it was not clear whether it should be limited or full range, but full range is the right (and consistent) choice.

---
 .../media/v4l/colorspaces-defs.rst              |  9 ++++-----
 .../media/v4l/colorspaces-details.rst           |  5 ++---
 include/uapi/linux/videodev2.h                  | 17 ++++++++---------
 3 files changed, 14 insertions(+), 17 deletions(-)
Documentation/userspace-api/media/v4l/colorspaces-defs.rst +4 -5
index 01404e1f609a7..4089f426258d6 100644
@@ -36,8 +36,7 @@ whole range, 0-255, dividing the angular value by 1.41. The enum
 :c:type:`v4l2_hsv_encoding` specifies which encoding is used.
 
 .. note:: The default R'G'B' quantization is full range for all
-   colorspaces except for BT.2020 which uses limited range R'G'B'
-   quantization.
+   colorspaces. HSV formats are always full range.
 
 .. tabularcolumns:: |p{6.7cm}|p{10.8cm}|
 
@@ -169,8 +168,8 @@ whole range, 0-255, dividing the angular value by 1.41. The enum
       - Details
     * - ``V4L2_QUANTIZATION_DEFAULT``
       - Use the default quantization encoding as defined by the
-	colorspace. This is always full range for R'G'B' (except for the
-	BT.2020 colorspace) and HSV. It is usually limited range for Y'CbCr.
+	colorspace. This is always full range for R'G'B' and HSV.
+	It is usually limited range for Y'CbCr.
     * - ``V4L2_QUANTIZATION_FULL_RANGE``
       - Use the full range quantization encoding. I.e. the range [0…1] is
 	mapped to [0…255] (with possible clipping to [1…254] to avoid the
@@ -180,4 +179,4 @@ whole range, 0-255, dividing the angular value by 1.41. The enum
     * - ``V4L2_QUANTIZATION_LIM_RANGE``
       - Use the limited range quantization encoding. I.e. the range [0…1]
 	is mapped to [16…235]. Cb and Cr are mapped from [-0.5…0.5] to
-	[16…240].
+	[16…240]. Limited Range cannot be used with HSV.
Documentation/userspace-api/media/v4l/colorspaces-details.rst +2 -3
index 79ed6f4f76eb3..fd9ddda4e0256 100644
@@ -377,9 +377,8 @@ Colorspace BT.2020 (V4L2_COLORSPACE_BT2020)
 The :ref:`itu2020` standard defines the colorspace used by Ultra-high
 definition television (UHDTV). The default transfer function is
 ``V4L2_XFER_FUNC_709``. The default Y'CbCr encoding is
-``V4L2_YCBCR_ENC_BT2020``. The default R'G'B' quantization is limited
-range (!), and so is the default Y'CbCr quantization. The chromaticities
-of the primary colors and the white reference are:
+``V4L2_YCBCR_ENC_BT2020``. The default Y'CbCr quantization is limited range.
+The chromaticities of the primary colors and the white reference are:
 
 
 
include/uapi/linux/videodev2.h +8 -9
index c3a1cf1c507f5..dd2f95c32e730 100644
@@ -371,9 +371,9 @@ enum v4l2_hsv_encoding {
 
 enum v4l2_quantization {
 	/*
-	 * The default for R'G'B' quantization is always full range, except
-	 * for the BT2020 colorspace. For Y'CbCr the quantization is always
-	 * limited range, except for COLORSPACE_JPEG: this is full range.
+	 * The default for R'G'B' quantization is always full range.
+	 * For Y'CbCr the quantization is always limited range, except
+	 * for COLORSPACE_JPEG: this is full range.
 	 */
 	V4L2_QUANTIZATION_DEFAULT     = 0,
 	V4L2_QUANTIZATION_FULL_RANGE  = 1,
@@ -382,14 +382,13 @@ enum v4l2_quantization {
 
 /*
  * Determine how QUANTIZATION_DEFAULT should map to a proper quantization.
- * This depends on whether the image is RGB or not, the colorspace and the
- * Y'CbCr encoding.
+ * This depends on whether the image is RGB or not, the colorspace.
+ * The Y'CbCr encoding is not used anymore, but is still there for backwards
+ * compatibility.
  */
 #define V4L2_MAP_QUANTIZATION_DEFAULT(is_rgb_or_hsv, colsp, ycbcr_enc) \
-	(((is_rgb_or_hsv) && (colsp) == V4L2_COLORSPACE_BT2020) ? \
-	 V4L2_QUANTIZATION_LIM_RANGE : \
-	 (((is_rgb_or_hsv) || (colsp) == V4L2_COLORSPACE_JPEG) ? \
-	 V4L2_QUANTIZATION_FULL_RANGE : V4L2_QUANTIZATION_LIM_RANGE))
+	(((is_rgb_or_hsv) || (colsp) == V4L2_COLORSPACE_JPEG) ? \
+	 V4L2_QUANTIZATION_FULL_RANGE : V4L2_QUANTIZATION_LIM_RANGE)
 
 /*
  * Deprecated names for opRGB colorspace (IEC 61966-2-5)
Signature · 1 line
2.25.1
author maintainer
#38 lore raw

PATCH 39/132 misc: fastrpc: fix common struct sg_table related issues

In reply to Sasha Levin

From: Marek Szyprowski <[email protected]>

[ Upstream commit 7cd7edb89437457ec36ffdbb970cc314d00c4aba ]

The Documentation/DMA-API-HOWTO.txt states that the dma_map_sg() function returns the number of the created entries in the DMA address space. However the subsequent calls to the dma_sync_sg_for_{device,cpu}() and dma_unmap_sg must be called with the original number of the entries passed to the dma_map_sg().

struct sg_table is a common structure used for describing a non-contiguous memory buffer, used commonly in the DRM and graphics subsystems. It consists of a scatterlist with memory pages and DMA addresses (sgl entry), as well as the number of scatterlist entries: CPU pages (orig_nents entry) and DMA mapped pages (nents entry).

It turned out that it was a common mistake to misuse nents and orig_nents entries, calling DMA-mapping functions with a wrong number of entries or ignoring the number of mapped entries returned by the dma_map_sg() function.

To avoid such issues, lets use a common dma-mapping wrappers operating directly on the struct sg_table objects and use scatterlist page iterators where possible. This, almost always, hides references to the nents and orig_nents entries, making the code robust, easier to follow and copy/paste safe.

---
 drivers/misc/fastrpc.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/misc/fastrpc.c +2 -2
index 7939c55daceb2..9d68677493163 100644
@@ -518,7 +518,7 @@ fastrpc_map_dma_buf(struct dma_buf_attachment *attachment,
 
 	table = &a->sgt;
 
-	if (!dma_map_sg(attachment->dev, table->sgl, table->nents, dir))
+	if (!dma_map_sgtable(attachment->dev, table, dir, 0))
 		return ERR_PTR(-ENOMEM);
 
 	return table;
@@ -528,7 +528,7 @@ static void fastrpc_unmap_dma_buf(struct dma_buf_attachment *attach,
 				  struct sg_table *table,
 				  enum dma_data_direction dir)
 {
-	dma_unmap_sg(attach->dev, table->sgl, table->nents, dir);
+	dma_unmap_sgtable(attach->dev, table, dir, 0);
 }
 
 static void fastrpc_release(struct dma_buf *dmabuf)
Signature · 1 line
2.25.1
author maintainer
#39 lore raw

PATCH 40/132 media: platform: Improve queue set up flow for bug fixing

In reply to Sasha Levin

From: Xia Jiang <[email protected]>

[ Upstream commit 5095a6413a0cf896ab468009b6142cb0fe617e66 ]

Add checking created buffer size follow in mtk_jpeg_queue_setup().

---
 drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c | 7 +++++++
 1 file changed, 7 insertions(+)
drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c +7 -0
index f82a81a3bdee2..c4b16dc2c0161 100644
@@ -571,6 +571,13 @@ static int mtk_jpeg_queue_setup(struct vb2_queue *q,
 	if (!q_data)
 		return -EINVAL;
 
+	if (*num_planes) {
+		for (i = 0; i < *num_planes; i++)
+			if (sizes[i] < q_data->sizeimage[i])
+				return -EINVAL;
+		return 0;
+	}
+
 	*num_planes = q_data->fmt->colplanes;
 	for (i = 0; i < q_data->fmt->colplanes; i++) {
 		sizes[i] = q_data->sizeimage[i];
Signature · 7 lines
2.25.1


_______________________________________________
Linux-mediatek mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-mediatek
author maintainer
#40 lore raw

PATCH 41/132 usb: typec: tcpm: During PR_SWAP, source caps should be sent only after tSwapSourceStart

In reply to Sasha Levin

From: Badhri Jagan Sridharan <[email protected]>

[ Upstream commit 6bbe2a90a0bb4af8dd99c3565e907fe9b5e7fd88 ]

The patch addresses the compliance test failures while running TD.PD.CP.E3, TD.PD.CP.E4, TD.PD.CP.E5 of the "Deterministic PD Compliance MOI" test plan published in https://www.usb.org/usbc.
For a product to be Type-C compliant, it's expected that these tests are run on usb.org certified Type-C compliance tester as mentioned in
https://www.usb.org/usbc.

The purpose of the tests TD.PD.CP.E3, TD.PD.CP.E4, TD.PD.CP.E5 is to verify the PR_SWAP response of the device. While doing so, the test asserts that Source Capabilities message is NOT received from the test device within tSwapSourceStart min (20 ms) from the time the last bit of GoodCRC corresponding to the RS_RDY message sent by the UUT was sent. If it does then the test fails.

This is in line with the requirements from the USB Power Delivery Specification Revision 3.0, Version 1.2:
"6.6.8.1 SwapSourceStartTimer
The SwapSourceStartTimer Shall be used by the new Source, after a Power Role Swap or Fast Role Swap, to ensure that it does not send Source_Capabilities Message before the new Sink is ready to receive the
Source_Capabilities Message. The new Source Shall Not send the Source_Capabilities Message earlier than tSwapSourceStart after the last bit of the EOP of GoodCRC Message sent in response to the PS_RDY Message sent by the new Source indicating that its power supply is ready."

The patch makes sure that TCPM does not send the Source_Capabilities Message within tSwapSourceStart(20ms) by transitioning into SRC_STARTUP only after tSwapSourceStart(20ms).

---
 drivers/usb/typec/tcpm/tcpm.c | 2 +-
 include/linux/usb/pd.h        | 1 +
 2 files changed, 2 insertions(+), 1 deletion(-)
drivers/usb/typec/tcpm/tcpm.c +1 -1
index b2111fe6d140a..53a601438156e 100644
@@ -3522,7 +3522,7 @@ static void run_state_machine(struct tcpm_port *port)
 		 */
 		tcpm_set_pwr_role(port, TYPEC_SOURCE);
 		tcpm_pd_send_control(port, PD_CTRL_PS_RDY);
-		tcpm_set_state(port, SRC_STARTUP, 0);
+		tcpm_set_state(port, SRC_STARTUP, PD_T_SWAP_SRC_START);
 		break;
 
 	case VCONN_SWAP_ACCEPT:
include/linux/usb/pd.h +1 -0
index a665d7f211424..c4b1b83da49b3 100644
@@ -473,6 +473,7 @@ static inline unsigned int rdo_max_power(u32 rdo)
 #define PD_T_ERROR_RECOVERY	100	/* minimum 25 is insufficient */
 #define PD_T_SRCSWAPSTDBY      625     /* Maximum of 650ms */
 #define PD_T_NEWSRC            250     /* Maximum of 275ms */
+#define PD_T_SWAP_SRC_START	20	/* Minimum of 20ms */
 
 #define PD_T_DRP_TRY		100	/* 75 - 150 ms */
 #define PD_T_DRP_TRYWAIT	600	/* 400 - 800 ms */
Signature · 1 line
2.25.1
author maintainer
#41 lore raw

PATCH 42/132 media: tw5864: check status of tw5864_frameinterval_get

In reply to Sasha Levin

From: Tom Rix <[email protected]>

[ Upstream commit 780d815dcc9b34d93ae69385a8465c38d423ff0f ]

clang static analysis reports this problem

tw5864-video.c:773:32: warning: The left expression of the compound
assignment is an uninitialized value.
The computed value will also be garbage

        fintv->stepwise.max.numerator *= std_max_fps;
        ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ^

stepwise.max is set with frameinterval, which comes from

	ret = tw5864_frameinterval_get(input, &frameinterval);
	fintv->stepwise.step = frameinterval;
	fintv->stepwise.min = frameinterval;
	fintv->stepwise.max = frameinterval;
	fintv->stepwise.max.numerator *= std_max_fps;

When tw5864_frameinterval_get() fails, frameinterval is not set. So check the status and fix another similar problem.

---
 drivers/media/pci/tw5864/tw5864-video.c | 6 ++++++
 1 file changed, 6 insertions(+)
drivers/media/pci/tw5864/tw5864-video.c +6 -0
index ec1e06da7e4fb..a65114e7ca346 100644
@@ -767,6 +767,9 @@ static int tw5864_enum_frameintervals(struct file *file, void *priv,
 	fintv->type = V4L2_FRMIVAL_TYPE_STEPWISE;
 
 	ret = tw5864_frameinterval_get(input, &frameinterval);
+	if (ret)
+		return ret;
+
 	fintv->stepwise.step = frameinterval;
 	fintv->stepwise.min = frameinterval;
 	fintv->stepwise.max = frameinterval;
@@ -785,6 +788,9 @@ static int tw5864_g_parm(struct file *file, void *priv,
 	cp->capability = V4L2_CAP_TIMEPERFRAME;
 
 	ret = tw5864_frameinterval_get(input, &cp->timeperframe);
+	if (ret)
+		return ret;
+
 	cp->timeperframe.numerator *= input->frame_interval;
 	cp->capturemode = 0;
 	cp->readbuffers = 2;
Signature · 1 line
2.25.1
author maintainer
#42 lore raw

PATCH 43/132 drm/vkms: avoid warning in vkms_get_vblank_timestamp

In reply to Sasha Levin

From: Sidong Yang <[email protected]>

[ Upstream commit 05ca530268a9d0ab3547e7b288635e35990a77c4 ]

This patch avoid the warning in vkms_get_vblank_timestamp when vblanks aren't enabled. When running igt test kms_cursor_crc just after vkms module, the warning raised like below. Initial value of vblank time is zero and hrtimer.node.expires is also zero if vblank aren't enabled before. vkms module isn't real hardware but just virtual hardware module. so vkms can't generate a resonable timestamp when hrtimer is off. it's best to grab the current time.

[106444.464503] [IGT] kms_cursor_crc: starting subtest pipe-A-cursor-size-change
[106444.471475] WARNING: CPU: 0 PID: 10109 at
vkms_get_vblank_timestamp+0x42/0x50 [vkms]
[106444.471511] CPU: 0 PID: 10109 Comm: kms_cursor_crc Tainted: G        W  OE
5.9.0-rc1+ #6
[106444.471514] RIP: 0010:vkms_get_vblank_timestamp+0x42/0x50 [vkms]
[106444.471528] Call Trace:
[106444.471551]  drm_get_last_vbltimestamp+0xb9/0xd0 [drm]
[106444.471566]  drm_reset_vblank_timestamp+0x63/0xe0 [drm]
[106444.471579]  drm_crtc_vblank_on+0x85/0x150 [drm]
[106444.471582]  vkms_crtc_atomic_enable+0xe/0x10 [vkms]
[106444.471592]  drm_atomic_helper_commit_modeset_enables+0x1db/0x230
[drm_kms_helper]
[106444.471594]  vkms_atomic_commit_tail+0x38/0xc0 [vkms]
[106444.471601]  commit_tail+0x97/0x130 [drm_kms_helper]
[106444.471608]  drm_atomic_helper_commit+0x117/0x140 [drm_kms_helper]
[106444.471622]  drm_atomic_commit+0x4a/0x50 [drm]
[106444.471629]  drm_atomic_helper_set_config+0x63/0xb0 [drm_kms_helper]
[106444.471642]  drm_mode_setcrtc+0x1d9/0x7b0 [drm]
[106444.471654]  ? drm_mode_getcrtc+0x1a0/0x1a0 [drm]
[106444.471666]  drm_ioctl_kernel+0xb6/0x100 [drm]
[106444.471677]  drm_ioctl+0x3ad/0x470 [drm]
[106444.471688]  ? drm_mode_getcrtc+0x1a0/0x1a0 [drm]
[106444.471692]  ? tomoyo_file_ioctl+0x19/0x20
[106444.471694]  __x64_sys_ioctl+0x96/0xd0
[106444.471697]  do_syscall_64+0x37/0x80
[106444.471699]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
Cc Daniel Vetter <[email protected]>
Cc Rodrigo Siqueira <[email protected]>
Cc Haneen Mohammed <[email protected]>
Cc Melissa Wen <[email protected]>
---
 drivers/gpu/drm/vkms/vkms_crtc.c | 5 +++++
 1 file changed, 5 insertions(+)
drivers/gpu/drm/vkms/vkms_crtc.c +5 -0
index ac85e17428f88..09c012d54d58f 100644
@@ -86,6 +86,11 @@ static bool vkms_get_vblank_timestamp(struct drm_crtc *crtc,
 	struct vkms_output *output = &vkmsdev->output;
 	struct drm_vblank_crtc *vblank = &dev->vblank[pipe];
 
+	if (!READ_ONCE(vblank->enabled)) {
+		*vblank_time = ktime_get();
+		return true;
+	}
+
 	*vblank_time = READ_ONCE(output->vblank_hrtimer.node.expires);
 
 	if (WARN_ON(*vblank_time == vblank->time))
Signature · 6 lines
2.25.1

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
author maintainer
#43 lore raw

PATCH 44/132 media: imx274: fix frame interval handling

In reply to Sasha Levin

From: Hans Verkuil <[email protected]>

[ Upstream commit 49b20d981d723fae5a93843c617af2b2c23611ec ]

1) the numerator and/or denominator might be 0, in that case fall back to the default frame interval. This is per the spec and this caused a v4l2-compliance failure.

2) the updated frame interval wasn't returned in the s_frame_interval subdev op.

---
 drivers/media/i2c/imx274.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)
drivers/media/i2c/imx274.c +5 -3
index 6011cec5e351d..e6aa9f32b6a83 100644
@@ -1235,6 +1235,8 @@ static int imx274_s_frame_interval(struct v4l2_subdev *sd,
 	ret = imx274_set_frame_interval(imx274, fi->interval);
 
 	if (!ret) {
+		fi->interval = imx274->frame_interval;
+
 		/*
 		 * exposure time range is decided by frame interval
 		 * need to update it after frame interval changes
@@ -1730,9 +1732,9 @@ static int imx274_set_frame_interval(struct stimx274 *priv,
 		__func__, frame_interval.numerator,
 		frame_interval.denominator);
 
-	if (frame_interval.numerator == 0) {
-		err = -EINVAL;
-		goto fail;
+	if (frame_interval.numerator == 0 || frame_interval.denominator == 0) {
+		frame_interval.denominator = IMX274_DEF_FRAME_RATE;
+		frame_interval.numerator = 1;
 	}
 
 	req_frame_rate = (u32)(frame_interval.denominator
Signature · 1 line
2.25.1
author maintainer
#44 lore raw

PATCH 45/132 mmc: via-sdmmc: Fix data race bug

In reply to Sasha Levin

From: Madhuparna Bhowmik <[email protected]>

[ Upstream commit 87d7ad089b318b4f319bf57f1daa64eb6d1d10ad ]

via_save_pcictrlreg() should be called with host->lock held as it writes to pm_pcictrl_reg, otherwise there can be a race condition between via_sd_suspend() and via_sdc_card_detect(). The same pattern is used in the function via_reset_pcictrl() as well, where via_save_pcictrlreg() is called with host->lock held.

Found by Linux Driver Verification project (linuxtesting.org).

---
 drivers/mmc/host/via-sdmmc.c | 3 +++
 1 file changed, 3 insertions(+)
drivers/mmc/host/via-sdmmc.c +3 -0
index ef95bce508890..e4d8126cd4e5b 100644
@@ -1259,11 +1259,14 @@ static void via_init_sdc_pm(struct via_crdr_mmc_host *host)
 static int via_sd_suspend(struct pci_dev *pcidev, pm_message_t state)
 {
 	struct via_crdr_mmc_host *host;
+	unsigned long flags;
 
 	host = pci_get_drvdata(pcidev);
 
+	spin_lock_irqsave(&host->lock, flags);
 	via_save_pcictrlreg(host);
 	via_save_sdcreg(host);
+	spin_unlock_irqrestore(&host->lock, flags);
 
 	pci_save_state(pcidev);
 	pci_enable_wake(pcidev, pci_choose_state(pcidev, state), 0);
Signature · 1 line
2.25.1
author maintainer
#45 lore raw

PATCH 46/132 drm/bridge/synopsys: dsi: add support for non-continuous HS clock

In reply to Sasha Levin

From: Antonio Borneo <[email protected]>

[ Upstream commit c6d94e37bdbb6dfe7e581e937a915ab58399b8a5 ]

Current code enables the HS clock when video mode is started or to send out a HS command, and disables the HS clock to send out a LP command. This is not what DSI spec specify.

Enable HS clock either in command and in video mode. Set automatic HS clock management for panels and devices that support non-continuous HS clock.

---
 drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)
drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c +7 -2
index 5ef0f154aa7bd..1dd57db184c89 100644
@@ -366,7 +366,6 @@ static void dw_mipi_message_config(struct dw_mipi_dsi *dsi,
 	if (lpm)
 		val |= CMD_MODE_ALL_LP;
 
-	dsi_write(dsi, DSI_LPCLK_CTRL, lpm ? 0 : PHY_TXREQUESTCLKHS);
 	dsi_write(dsi, DSI_CMD_MODE_CFG, val);
 }
 
@@ -542,16 +541,22 @@ static void dw_mipi_dsi_video_mode_config(struct dw_mipi_dsi *dsi)
 static void dw_mipi_dsi_set_mode(struct dw_mipi_dsi *dsi,
 				 unsigned long mode_flags)
 {
+	u32 val;
+
 	dsi_write(dsi, DSI_PWR_UP, RESET);
 
 	if (mode_flags & MIPI_DSI_MODE_VIDEO) {
 		dsi_write(dsi, DSI_MODE_CFG, ENABLE_VIDEO_MODE);
 		dw_mipi_dsi_video_mode_config(dsi);
-		dsi_write(dsi, DSI_LPCLK_CTRL, PHY_TXREQUESTCLKHS);
 	} else {
 		dsi_write(dsi, DSI_MODE_CFG, ENABLE_CMD_MODE);
 	}
 
+	val = PHY_TXREQUESTCLKHS;
+	if (dsi->mode_flags & MIPI_DSI_CLOCK_NON_CONTINUOUS)
+		val |= AUTO_CLKLANE_CTRL;
+	dsi_write(dsi, DSI_LPCLK_CTRL, val);
+
 	dsi_write(dsi, DSI_PWR_UP, POWERUP);
 }
 
Signature · 6 lines
2.25.1

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
author maintainer
#46 lore raw

PATCH 47/132 brcmfmac: increase F2 watermark for BCM4329

In reply to Sasha Levin

From: Dmitry Osipenko <[email protected]>

[ Upstream commit 317da69d10b0247c4042354eb90c75b81620ce9d ]

This patch fixes SDHCI CRC errors during of RX throughput testing on BCM4329 chip if SDIO BUS is clocked above 25MHz. In particular the checksum problem is observed on NVIDIA Tegra20 SoCs. The good watermark value is borrowed from downstream BCMDHD driver and it's matching to the value that is already used for the BCM4339 chip, hence let's re-use it for BCM4329.

---
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c | 1 +
 1 file changed, 1 insertion(+)
drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c +1 -0
index bc02168ebb536..9ac9e6085a0c5 100644
@@ -4227,6 +4227,7 @@ static void brcmf_sdio_firmware_callback(struct device *dev, int err,
 			brcmf_sdiod_writeb(sdiod, SBSDIO_FUNC1_MESBUSYCTRL,
 					   CY_43012_MESBUSYCTRL, &err);
 			break;
+		case SDIO_DEVICE_ID_BROADCOM_4329:
 		case SDIO_DEVICE_ID_BROADCOM_4339:
 			brcmf_dbg(INFO, "set F2 watermark to 0x%x*4 bytes for 4339\n",
 				  CY_4339_F2_WATERMARK);
Signature · 1 line
2.25.1
author maintainer
#47 lore raw

PATCH 48/132 arm64: topology: Stop using MPIDR for topology information

In reply to Sasha Levin

From: Valentin Schneider <[email protected]>

[ Upstream commit 3102bc0e6ac752cc5df896acb557d779af4d82a1 ]

In the absence of ACPI or DT topology data, we fallback to haphazardly decoding *something* out of MPIDR. Sadly, the contents of that register are mostly unusable due to the implementation leniancy and things like Aff0 having to be capped to 15 (despite being encoded on 8 bits).

Consider a simple system with a single package of 32 cores, all under the same LLC. We ought to be shoving them in the same core_sibling mask, but MPIDR is going to look like:

  | CPU  | 0 | ... | 15 | 16 | ... | 31 |
  |------+---+-----+----+----+-----+----+
  | Aff0 | 0 | ... | 15 |  0 | ... | 15 |
  | Aff1 | 0 | ... |  0 |  1 | ... |  1 |
  | Aff2 | 0 | ... |  0 |  0 | ... |  0 |

Which will eventually yield

core_sibling(0-15) == 0-15
core_sibling(16-31) == 16-31

NUMA woes
=========

If we try to play games with this and set up NUMA boundaries within those groups of 16 cores via e.g. QEMU:

  # Node0: 0-9; Node1: 10-19
  $ qemu-system-aarch64 <blah> \
    -smp 20 -numa node,cpus=0-9,nodeid=0 -numa node,cpus=10-19,nodeid=1

The scheduler's MC domain (all CPUs with same LLC) is going to be built via

arch_topology.c::cpu_coregroup_mask()

In there we try to figure out a sensible mask out of the topology information we have. In short, here we'll pick the smallest of NUMA or core sibling mask.

node_mask(CPU9) == 0-9
core_sibling(CPU9) == 0-15

MC mask for CPU9 will thus be 0-9, not a problem.

node_mask(CPU10) == 10-19
core_sibling(CPU10) == 0-15

MC mask for CPU10 will thus be 10-19, not a problem.

node_mask(CPU16) == 10-19
core_sibling(CPU16) == 16-19

MC mask for CPU16 will thus be 16-19... Uh oh. CPUs 16-19 are in two different unique MC spans, and the scheduler has no idea what to make of that. That triggers the WARN_ON() added by commit

ccf74128d66c ("sched/topology: Assert non-NUMA topology masks don't (partially) overlap")

Fixing MPIDR-derived topology
=============================

We could try to come up with some cleverer scheme to figure out which of the available masks to pick, but really if one of those masks resulted from MPIDR then it should be discarded because it's bound to be bogus.

I was hoping to give MPIDR a chance for SMT, to figure out which threads are in the same core using Aff1-3 as core ID, but Sudeep and Robin pointed out to me that there are systems out there where *all* cores have non-zero values in their higher affinity fields (e.g. RK3288 has "5" in all of its cores' MPIDR.Aff1), which would expose a bogus core ID to userspace.

Stop using MPIDR for topology information. When no other source of topology information is available, mark each CPU as its own core and its NUMA node as its LLC domain.

---
 arch/arm64/kernel/topology.c | 32 +++++++++++++++++---------------
 1 file changed, 17 insertions(+), 15 deletions(-)
arch/arm64/kernel/topology.c +17 -15
index 0801a0f3c156a..ff1dd1dbfe641 100644
@@ -36,21 +36,23 @@ void store_cpu_topology(unsigned int cpuid)
 	if (mpidr & MPIDR_UP_BITMASK)
 		return;
 
-	/* Create cpu topology mapping based on MPIDR. */
-	if (mpidr & MPIDR_MT_BITMASK) {
-		/* Multiprocessor system : Multi-threads per core */
-		cpuid_topo->thread_id  = MPIDR_AFFINITY_LEVEL(mpidr, 0);
-		cpuid_topo->core_id    = MPIDR_AFFINITY_LEVEL(mpidr, 1);
-		cpuid_topo->package_id = MPIDR_AFFINITY_LEVEL(mpidr, 2) |
-					 MPIDR_AFFINITY_LEVEL(mpidr, 3) << 8;
-	} else {
-		/* Multiprocessor system : Single-thread per core */
-		cpuid_topo->thread_id  = -1;
-		cpuid_topo->core_id    = MPIDR_AFFINITY_LEVEL(mpidr, 0);
-		cpuid_topo->package_id = MPIDR_AFFINITY_LEVEL(mpidr, 1) |
-					 MPIDR_AFFINITY_LEVEL(mpidr, 2) << 8 |
-					 MPIDR_AFFINITY_LEVEL(mpidr, 3) << 16;
-	}
+	/*
+	 * This would be the place to create cpu topology based on MPIDR.
+	 *
+	 * However, it cannot be trusted to depict the actual topology; some
+	 * pieces of the architecture enforce an artificial cap on Aff0 values
+	 * (e.g. GICv3's ICC_SGI1R_EL1 limits it to 15), leading to an
+	 * artificial cycling of Aff1, Aff2 and Aff3 values. IOW, these end up
+	 * having absolutely no relationship to the actual underlying system
+	 * topology, and cannot be reasonably used as core / package ID.
+	 *
+	 * If the MT bit is set, Aff0 *could* be used to define a thread ID, but
+	 * we still wouldn't be able to obtain a sane core ID. This means we
+	 * need to entirely ignore MPIDR for any topology deduction.
+	 */
+	cpuid_topo->thread_id  = -1;
+	cpuid_topo->core_id    = cpuid;
+	cpuid_topo->package_id = cpu_to_node(cpuid);
 
 	pr_debug("CPU%u: cluster %d core %d thread %d mpidr %#016llx\n",
 		 cpuid, cpuid_topo->package_id, cpuid_topo->core_id,
Signature · 1 line
2.25.1
author maintainer
#48 lore raw

PATCH 49/132 printk: reduce LOG_BUF_SHIFT range for H8300

In reply to Sasha Levin

From: John Ogness <[email protected]>

[ Upstream commit 550c10d28d21bd82a8bb48debbb27e6ed53262f6 ]

The .bss section for the h8300 is relatively small. A value of CONFIG_LOG_BUF_SHIFT that is larger than 19 will create a static printk ringbuffer that is too large. Limit the range appropriately for the H8300.

---
 init/Kconfig | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
init/Kconfig +2 -1
index 0498af567f706..5e68928c131b8 100644
@@ -654,7 +654,8 @@ config IKHEADERS
 
 config LOG_BUF_SHIFT
 	int "Kernel log buffer size (16 => 64KB, 17 => 128KB)"
-	range 12 25
+	range 12 25 if !H8300
+	range 12 19 if H8300
 	default 17
 	depends on PRINTK
 	help
Signature · 1 line
2.25.1
author maintainer
#49 lore raw

PATCH 50/132 ia64: kprobes: Use generic kretprobe trampoline handler

In reply to Sasha Levin

From: Masami Hiramatsu <[email protected]>

[ Upstream commit e792ff804f49720ce003b3e4c618b5d996256a18 ]

Use the generic kretprobe trampoline handler. Don't use framepointer verification.

---
 arch/ia64/kernel/kprobes.c | 77 +-------------------------------------
 1 file changed, 2 insertions(+), 75 deletions(-)
arch/ia64/kernel/kprobes.c +2 -74
index 7a7df944d7986..fc1ff8a4d7de6 100644
@@ -396,83 +396,9 @@ static void kretprobe_trampoline(void)
 {
 }
 
-/*
- * At this point the target function has been tricked into
- * returning into our trampoline.  Lookup the associated instance
- * and then:
- *    - call the handler function
- *    - cleanup by marking the instance as unused
- *    - long jump back to the original return address
- */
 int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs)
 {
-	struct kretprobe_instance *ri = NULL;
-	struct hlist_head *head, empty_rp;
-	struct hlist_node *tmp;
-	unsigned long flags, orig_ret_address = 0;
-	unsigned long trampoline_address -		((struct fnptr *)kretprobe_trampoline)->ip;
-
-	INIT_HLIST_HEAD(&empty_rp);
-	kretprobe_hash_lock(current, &head, &flags);
-
-	/*
-	 * It is possible to have multiple instances associated with a given
-	 * task either because an multiple functions in the call path
-	 * have a return probe installed on them, and/or more than one return
-	 * return probe was registered for a target function.
-	 *
-	 * We can handle this because:
-	 *     - instances are always inserted at the head of the list
-	 *     - when multiple return probes are registered for the same
-	 *       function, the first instance's ret_addr will point to the
-	 *       real return address, and all the rest will point to
-	 *       kretprobe_trampoline
-	 */
-	hlist_for_each_entry_safe(ri, tmp, head, hlist) {
-		if (ri->task != current)
-			/* another task is sharing our hash bucket */
-			continue;
-
-		orig_ret_address = (unsigned long)ri->ret_addr;
-		if (orig_ret_address != trampoline_address)
-			/*
-			 * This is the real return address. Any other
-			 * instances associated with this task are for
-			 * other calls deeper on the call stack
-			 */
-			break;
-	}
-
-	regs->cr_iip = orig_ret_address;
-
-	hlist_for_each_entry_safe(ri, tmp, head, hlist) {
-		if (ri->task != current)
-			/* another task is sharing our hash bucket */
-			continue;
-
-		if (ri->rp && ri->rp->handler)
-			ri->rp->handler(ri, regs);
-
-		orig_ret_address = (unsigned long)ri->ret_addr;
-		recycle_rp_inst(ri, &empty_rp);
-
-		if (orig_ret_address != trampoline_address)
-			/*
-			 * This is the real return address. Any other
-			 * instances associated with this task are for
-			 * other calls deeper on the call stack
-			 */
-			break;
-	}
-	kretprobe_assert(ri, orig_ret_address, trampoline_address);
-
-	kretprobe_hash_unlock(current, &flags);
-
-	hlist_for_each_entry_safe(ri, tmp, &empty_rp, hlist) {
-		hlist_del(&ri->hlist);
-		kfree(ri);
-	}
+	regs->cr_iip = __kretprobe_trampoline_handler(regs, kretprobe_trampoline, NULL);
 	/*
 	 * By returning a non-zero value, we are telling
 	 * kprobe_handler() that we don't want the post_handler
@@ -485,6 +411,7 @@ void __kprobes arch_prepare_kretprobe(struct kretprobe_instance *ri,
 				      struct pt_regs *regs)
 {
 	ri->ret_addr = (kprobe_opcode_t *)regs->b0;
+	ri->fp = NULL;
 
 	/* Replace the return addr with trampoline addr */
 	regs->b0 = ((struct fnptr *)kretprobe_trampoline)->ip;
Signature · 1 line
2.25.1
author maintainer
#50 lore raw

PATCH 51/132 kgdb: Make "kgdbcon" work properly with "kgdb_earlycon"

In reply to Sasha Levin

From: Douglas Anderson <[email protected]>

[ Upstream commit b18b099e04f450cdc77bec72acefcde7042bd1f3 ]

On my system the kernel processes the "kgdb_earlycon" parameter before the "kgdbcon" parameter. When we setup "kgdb_earlycon" we'll end up in kgdb_register_callbacks() and "kgdb_use_con" won't have been set yet so we'll never get around to starting "kgdbcon". Let's remedy this by detecting that the IO module was already registered when setting "kgdb_use_con" and registering the console then.

As part of this, to avoid pre-declaring things, move the handling of the "kgdbcon" further down in the file.

---
 kernel/debug/debug_core.c | 22 ++++++++++++++--------
 1 file changed, 14 insertions(+), 8 deletions(-)
kernel/debug/debug_core.c +14 -8
index 9e5934780f414..03d5b17347da1 100644
@@ -94,14 +94,6 @@ int dbg_switch_cpu;
 /* Use kdb or gdbserver mode */
 int dbg_kdb_mode = 1;
 
-static int __init opt_kgdb_con(char *str)
-{
-	kgdb_use_con = 1;
-	return 0;
-}
-
-early_param("kgdbcon", opt_kgdb_con);
-
 module_param(kgdb_use_con, int, 0644);
 module_param(kgdbreboot, int, 0644);
 
@@ -920,6 +912,20 @@ static struct console kgdbcons = {
 	.index		= -1,
 };
 
+static int __init opt_kgdb_con(char *str)
+{
+	kgdb_use_con = 1;
+
+	if (kgdb_io_module_registered && !kgdb_con_registered) {
+		register_console(&kgdbcons);
+		kgdb_con_registered = 1;
+	}
+
+	return 0;
+}
+
+early_param("kgdbcon", opt_kgdb_con);
+
 #ifdef CONFIG_MAGIC_SYSRQ
 static void sysrq_handle_dbg(int key)
 {
Signature · 1 line
2.25.1
author maintainer
#51 lore raw

PATCH 52/132 bpf: Permit map_ptr arithmetic with opcode add and offset 0

In reply to Sasha Levin

From: Yonghong Song <[email protected]>

[ Upstream commit 7c6967326267bd5c0dded0a99541357d70dd11ac ]

Commit 41c48f3a98231 ("bpf: Support access
to bpf map fields") added support to access map fields with CORE support. For example,

            struct bpf_map {
                    __u32 max_entries;
            } __attribute__((preserve_access_index));

            struct bpf_array {
                    struct bpf_map map;
                    __u32 elem_size;
            } __attribute__((preserve_access_index));

            struct {
                    __uint(type, BPF_MAP_TYPE_ARRAY);
                    __uint(max_entries, 4);
                    __type(key, __u32);
                    __type(value, __u32);
            } m_array SEC(".maps");

            SEC("cgroup_skb/egress")
            int cg_skb(void *ctx)
            {
                    struct bpf_array *array = (struct bpf_array *)&m_array;

                    /* .. array->map.max_entries .. */
            }

In kernel, bpf_htab has similar structure,

	    struct bpf_htab {
		    struct bpf_map map;
                    ...
            }

In the above cg_skb(), to access array->map.max_entries, with CORE, the clang will generate two builtin's.

            base = &m_array;
            /* access array.map */
            map_addr = __builtin_preserve_struct_access_info(base, 0, 0);
            /* access array.map.max_entries */
            max_entries_addr = __builtin_preserve_struct_access_info(map_addr, 0, 0);
	    max_entries = *max_entries_addr;

In the current llvm, if two builtin's are in the same function or
in the same function after inlining, the compiler is smart enough to chain them together and generates like below:
base = &m_array;
max_entries = *(base + reloc_offset); /* reloc_offset = 0 in this case */
and we are fine.

But if we force no inlining for one of functions in test_map_ptr() selftest, e.g., check_default(), the above two __builtin_preserve_* will be in two different functions. In this case, we will have code like:
func check_hash():

            reloc_offset_map = 0;
            base = &m_array;
            map_base = base + reloc_offset_map;
            check_default(map_base, ...)
   func check_default(map_base, ...):
            max_entries = *(map_base + reloc_offset_max_entries);

In kernel, map_ptr (CONST_PTR_TO_MAP) does not allow any arithmetic.
The above "map_base = base + reloc_offset_map" will trigger a verifier failure.
; VERIFY(check_default(&hash->map, map));
0: (18) r7 = 0xffffb4fe8018a004
2: (b4) w1 = 110
3: (63) *(u32 *)(r7 +0) = r1
R1_w=invP110 R7_w=map_value(id=0,off=4,ks=4,vs=8,imm=0) R10=fp0
; VERIFY_TYPE(BPF_MAP_TYPE_HASH, check_hash);
4: (18) r1 = 0xffffb4fe8018a000
6: (b4) w2 = 1
7: (63) *(u32 *)(r1 +0) = r2
R1_w=map_value(id=0,off=0,ks=4,vs=8,imm=0) R2_w=invP1 R7_w=map_value(id=0,off=4,ks=4,vs=8,imm=0) R10=fp0
8: (b7) r2 = 0
9: (18) r8 = 0xffff90bcb500c000
11: (18) r1 = 0xffff90bcb500c000
13: (0f) r1 += r2
R1 pointer arithmetic on map_ptr prohibited

To fix the issue, let us permit map_ptr + 0 arithmetic which will result in exactly the same map_ptr.

---
 kernel/bpf/verifier.c | 4 ++++
 1 file changed, 4 insertions(+)
kernel/bpf/verifier.c +4 -0
index 89b07db146763..2b318db54bf39 100644
@@ -5042,6 +5042,10 @@ static int adjust_ptr_min_max_vals(struct bpf_verifier_env *env,
 			dst, reg_type_str[ptr_reg->type]);
 		return -EACCES;
 	case CONST_PTR_TO_MAP:
+		/* smin_val represents the known value */
+		if (known && smin_val == 0 && opcode == BPF_ADD)
+			break;
+		/* fall-through */
 	case PTR_TO_PACKET_END:
 	case PTR_TO_SOCKET:
 	case PTR_TO_SOCKET_OR_NULL:
Signature · 1 line
2.25.1
author maintainer
#52 lore raw

PATCH 53/132 drm: exynos: fix common struct sg_table related issues

In reply to Sasha Levin

From: Marek Szyprowski <[email protected]>

[ Upstream commit 84404614167b829f7b58189cd24b6c0c74897171 ]

The Documentation/DMA-API-HOWTO.txt states that the dma_map_sg() function returns the number of the created entries in the DMA address space. However the subsequent calls to the dma_sync_sg_for_{device,cpu}() and dma_unmap_sg must be called with the original number of the entries passed to the dma_map_sg().

struct sg_table is a common structure used for describing a non-contiguous memory buffer, used commonly in the DRM and graphics subsystems. It consists of a scatterlist with memory pages and DMA addresses (sgl entry), as well as the number of scatterlist entries: CPU pages (orig_nents entry) and DMA mapped pages (nents entry).

It turned out that it was a common mistake to misuse nents and orig_nents entries, calling DMA-mapping functions with a wrong number of entries or ignoring the number of mapped entries returned by the dma_map_sg() function.

To avoid such issues, lets use a common dma-mapping wrappers operating directly on the struct sg_table objects and use scatterlist page iterators where possible. This, almost always, hides references to the nents and orig_nents entries, making the code robust, easier to follow and copy/paste safe.

---
 drivers/gpu/drm/exynos/exynos_drm_g2d.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)
drivers/gpu/drm/exynos/exynos_drm_g2d.c +5 -5
index 03be314271811..967a5cdc120e3 100644
@@ -395,8 +395,8 @@ static void g2d_userptr_put_dma_addr(struct g2d_data *g2d,
 		return;
 
 out:
-	dma_unmap_sg(to_dma_dev(g2d->drm_dev), g2d_userptr->sgt->sgl,
-			g2d_userptr->sgt->nents, DMA_BIDIRECTIONAL);
+	dma_unmap_sgtable(to_dma_dev(g2d->drm_dev), g2d_userptr->sgt,
+			  DMA_BIDIRECTIONAL, 0);
 
 	pages = frame_vector_pages(g2d_userptr->vec);
 	if (!IS_ERR(pages)) {
@@ -511,10 +511,10 @@ static dma_addr_t *g2d_userptr_get_dma_addr(struct g2d_data *g2d,
 
 	g2d_userptr->sgt = sgt;
 
-	if (!dma_map_sg(to_dma_dev(g2d->drm_dev), sgt->sgl, sgt->nents,
-				DMA_BIDIRECTIONAL)) {
+	ret = dma_map_sgtable(to_dma_dev(g2d->drm_dev), sgt,
+			      DMA_BIDIRECTIONAL, 0);
+	if (ret) {
 		DRM_DEV_ERROR(g2d->dev, "failed to map sgt with dma region.\n");
-		ret = -ENOMEM;
 		goto err_sg_free_table;
 	}
 
Signature · 6 lines
2.25.1

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
author maintainer
#53 lore raw

PATCH 54/132 xen: gntdev: fix common struct sg_table related issues

In reply to Sasha Levin

From: Marek Szyprowski <[email protected]>

[ Upstream commit d1749eb1ab85e04e58c29e58900e3abebbdd6e82 ]

The Documentation/DMA-API-HOWTO.txt states that the dma_map_sg() function returns the number of the created entries in the DMA address space. However the subsequent calls to the dma_sync_sg_for_{device,cpu}() and dma_unmap_sg must be called with the original number of the entries passed to the dma_map_sg().

struct sg_table is a common structure used for describing a non-contiguous memory buffer, used commonly in the DRM and graphics subsystems. It consists of a scatterlist with memory pages and DMA addresses (sgl entry), as well as the number of scatterlist entries: CPU pages (orig_nents entry) and DMA mapped pages (nents entry).

It turned out that it was a common mistake to misuse nents and orig_nents entries, calling DMA-mapping functions with a wrong number of entries or ignoring the number of mapped entries returned by the dma_map_sg() function.

To avoid such issues, lets use a common dma-mapping wrappers operating directly on the struct sg_table objects and use scatterlist page iterators where possible. This, almost always, hides references to the nents and orig_nents entries, making the code robust, easier to follow and copy/paste safe.

---
 drivers/xen/gntdev-dmabuf.c | 13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)
drivers/xen/gntdev-dmabuf.c +6 -7
index b1b6eebafd5de..4c13cbc99896a 100644
@@ -247,10 +247,9 @@ static void dmabuf_exp_ops_detach(struct dma_buf *dma_buf,
 
 		if (sgt) {
 			if (gntdev_dmabuf_attach->dir != DMA_NONE)
-				dma_unmap_sg_attrs(attach->dev, sgt->sgl,
-						   sgt->nents,
-						   gntdev_dmabuf_attach->dir,
-						   DMA_ATTR_SKIP_CPU_SYNC);
+				dma_unmap_sgtable(attach->dev, sgt,
+						  gntdev_dmabuf_attach->dir,
+						  DMA_ATTR_SKIP_CPU_SYNC);
 			sg_free_table(sgt);
 		}
 
@@ -288,8 +287,8 @@ dmabuf_exp_ops_map_dma_buf(struct dma_buf_attachment *attach,
 	sgt = dmabuf_pages_to_sgt(gntdev_dmabuf->pages,
 				  gntdev_dmabuf->nr_pages);
 	if (!IS_ERR(sgt)) {
-		if (!dma_map_sg_attrs(attach->dev, sgt->sgl, sgt->nents, dir,
-				      DMA_ATTR_SKIP_CPU_SYNC)) {
+		if (dma_map_sgtable(attach->dev, sgt, dir,
+				    DMA_ATTR_SKIP_CPU_SYNC)) {
 			sg_free_table(sgt);
 			kfree(sgt);
 			sgt = ERR_PTR(-ENOMEM);
@@ -633,7 +632,7 @@ dmabuf_imp_to_refs(struct gntdev_dmabuf_priv *priv, struct device *dev,
 
 	/* Now convert sgt to array of pages and check for page validity. */
 	i = 0;
-	for_each_sg_page(sgt->sgl, &sg_iter, sgt->nents, 0) {
+	for_each_sgtable_page(sgt, &sg_iter, 0) {
 		struct page *page = sg_page_iter_page(&sg_iter);
 		/*
 		 * Check if page is valid: this can happen if we are given
Signature · 1 line
2.25.1
author maintainer
#54 lore raw

PATCH 55/132 drm: lima: fix common struct sg_table related issues

In reply to Sasha Levin

From: Marek Szyprowski <[email protected]>

[ Upstream commit c3d9c17f486d5c54940487dc31a54ebfdeeb371a ]

The Documentation/DMA-API-HOWTO.txt states that the dma_map_sg() function returns the number of the created entries in the DMA address space. However the subsequent calls to the dma_sync_sg_for_{device,cpu}() and dma_unmap_sg must be called with the original number of the entries passed to the dma_map_sg().

struct sg_table is a common structure used for describing a non-contiguous memory buffer, used commonly in the DRM and graphics subsystems. It consists of a scatterlist with memory pages and DMA addresses (sgl entry), as well as the number of scatterlist entries: CPU pages (orig_nents entry) and DMA mapped pages (nents entry).

It turned out that it was a common mistake to misuse nents and orig_nents entries, calling DMA-mapping functions with a wrong number of entries or ignoring the number of mapped entries returned by the dma_map_sg() function.

To avoid such issues, lets use a common dma-mapping wrappers operating directly on the struct sg_table objects and use scatterlist page iterators where possible. This, almost always, hides references to the nents and orig_nents entries, making the code robust, easier to follow and copy/paste safe.

---
 drivers/gpu/drm/lima/lima_gem.c | 11 ++++++++---
 drivers/gpu/drm/lima/lima_vm.c  |  5 ++---
 2 files changed, 10 insertions(+), 6 deletions(-)
drivers/gpu/drm/lima/lima_gem.c +8 -3
index 5404e0d668dbb..cda43f6848335 100644
@@ -69,8 +69,7 @@ int lima_heap_alloc(struct lima_bo *bo, struct lima_vm *vm)
 		return ret;
 
 	if (bo->base.sgt) {
-		dma_unmap_sg(dev, bo->base.sgt->sgl,
-			     bo->base.sgt->nents, DMA_BIDIRECTIONAL);
+		dma_unmap_sgtable(dev, bo->base.sgt, DMA_BIDIRECTIONAL, 0);
 		sg_free_table(bo->base.sgt);
 	} else {
 		bo->base.sgt = kmalloc(sizeof(*bo->base.sgt), GFP_KERNEL);
@@ -80,7 +79,13 @@ int lima_heap_alloc(struct lima_bo *bo, struct lima_vm *vm)
 		}
 	}
 
-	dma_map_sg(dev, sgt.sgl, sgt.nents, DMA_BIDIRECTIONAL);
+	ret = dma_map_sgtable(dev, &sgt, DMA_BIDIRECTIONAL, 0);
+	if (ret) {
+		sg_free_table(&sgt);
+		kfree(bo->base.sgt);
+		bo->base.sgt = NULL;
+		return ret;
+	}
 
 	*bo->base.sgt = sgt;
 
drivers/gpu/drm/lima/lima_vm.c +2 -3
index 5b92fb82674a9..2b2739adc7f53 100644
@@ -124,7 +124,7 @@ int lima_vm_bo_add(struct lima_vm *vm, struct lima_bo *bo, bool create)
 	if (err)
 		goto err_out1;
 
-	for_each_sg_dma_page(bo->base.sgt->sgl, &sg_iter, bo->base.sgt->nents, 0) {
+	for_each_sgtable_dma_page(bo->base.sgt, &sg_iter, 0) {
 		err = lima_vm_map_page(vm, sg_page_iter_dma_address(&sg_iter),
 				       bo_va->node.start + offset);
 		if (err)
@@ -298,8 +298,7 @@ int lima_vm_map_bo(struct lima_vm *vm, struct lima_bo *bo, int pageoff)
 	mutex_lock(&vm->lock);
 
 	base = bo_va->node.start + (pageoff << PAGE_SHIFT);
-	for_each_sg_dma_page(bo->base.sgt->sgl, &sg_iter,
-			     bo->base.sgt->nents, pageoff) {
+	for_each_sgtable_dma_page(bo->base.sgt, &sg_iter, pageoff) {
 		err = lima_vm_map_page(vm, sg_page_iter_dma_address(&sg_iter),
 				       base + offset);
 		if (err)
Signature · 6 lines
2.25.1

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
author maintainer
#55 lore raw

PATCH 56/132 drm: panfrost: fix common struct sg_table related issues

In reply to Sasha Levin

From: Marek Szyprowski <[email protected]>

[ Upstream commit 34a4e66faf8b22c8409cbd46839ba5e488b1e6a9 ]

The Documentation/DMA-API-HOWTO.txt states that the dma_map_sg() function returns the number of the created entries in the DMA address space. However the subsequent calls to the dma_sync_sg_for_{device,cpu}() and dma_unmap_sg must be called with the original number of the entries passed to the dma_map_sg().

struct sg_table is a common structure used for describing a non-contiguous memory buffer, used commonly in the DRM and graphics subsystems. It consists of a scatterlist with memory pages and DMA addresses (sgl entry), as well as the number of scatterlist entries: CPU pages (orig_nents entry) and DMA mapped pages (nents entry).

It turned out that it was a common mistake to misuse nents and orig_nents entries, calling DMA-mapping functions with a wrong number of entries or ignoring the number of mapped entries returned by the dma_map_sg() function.

To avoid such issues, lets use a common dma-mapping wrappers operating directly on the struct sg_table objects and use scatterlist page iterators where possible. This, almost always, hides references to the nents and orig_nents entries, making the code robust, easier to follow and copy/paste safe.

---
 drivers/gpu/drm/panfrost/panfrost_gem.c | 4 ++--
 drivers/gpu/drm/panfrost/panfrost_mmu.c | 7 +++----
 2 files changed, 5 insertions(+), 6 deletions(-)
drivers/gpu/drm/panfrost/panfrost_gem.c +2 -2
index 556181ea4a073..2ddad8f36f12f 100644
@@ -41,8 +41,8 @@ static void panfrost_gem_free_object(struct drm_gem_object *obj)
 
 		for (i = 0; i < n_sgt; i++) {
 			if (bo->sgts[i].sgl) {
-				dma_unmap_sg(pfdev->dev, bo->sgts[i].sgl,
-					     bo->sgts[i].nents, DMA_BIDIRECTIONAL);
+				dma_unmap_sgtable(pfdev->dev, &bo->sgts[i],
+						  DMA_BIDIRECTIONAL, 0);
 				sg_free_table(&bo->sgts[i]);
 			}
 		}
drivers/gpu/drm/panfrost/panfrost_mmu.c +3 -4
index 3c8ae7411c800..40a04acfa0260 100644
@@ -253,7 +253,7 @@ static int mmu_map_sg(struct panfrost_device *pfdev, struct panfrost_mmu *mmu,
 	struct io_pgtable_ops *ops = mmu->pgtbl_ops;
 	u64 start_iova = iova;
 
-	for_each_sg(sgt->sgl, sgl, sgt->nents, count) {
+	for_each_sgtable_dma_sg(sgt, sgl, count) {
 		unsigned long paddr = sg_dma_address(sgl);
 		size_t len = sg_dma_len(sgl);
 
@@ -517,10 +517,9 @@ static int panfrost_mmu_map_fault_addr(struct panfrost_device *pfdev, int as,
 	if (ret)
 		goto err_pages;
 
-	if (!dma_map_sg(pfdev->dev, sgt->sgl, sgt->nents, DMA_BIDIRECTIONAL)) {
-		ret = -EINVAL;
+	ret = dma_map_sgtable(pfdev->dev, sgt, DMA_BIDIRECTIONAL, 0);
+	if (ret)
 		goto err_map;
-	}
 
 	mmu_map_sg(pfdev, bomapping->mmu, addr,
 		   IOMMU_WRITE | IOMMU_READ | IOMMU_NOEXEC, sgt);
Signature · 6 lines
2.25.1

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
author maintainer
#56 lore raw

PATCH 57/132 media: uvcvideo: Fix dereference of out-of-bound list iterator

In reply to Sasha Levin

From: "Daniel W. S. Almeida" <[email protected]>

[ Upstream commit f875bcc375c738bf2f599ff2e1c5b918dbd07c45 ]

Fixes the following coccinelle report:

drivers/media/usb/uvc/uvc_ctrl.c:1860:5-11:
ERROR: invalid reference to the index variable of the iterator on line 1854

by adding a boolean variable to check if the loop has found the

Found using - Coccinelle (http://coccinelle.lip6.fr)

[Replace cursor variable with bool found]

---
 drivers/media/usb/uvc/uvc_ctrl.c | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)
drivers/media/usb/uvc/uvc_ctrl.c +9 -4
index e399b9fad7574..aed84528758f6 100644
@@ -1844,30 +1844,35 @@ int uvc_xu_ctrl_query(struct uvc_video_chain *chain,
 {
 	struct uvc_entity *entity;
 	struct uvc_control *ctrl;
-	unsigned int i, found = 0;
+	unsigned int i;
+	bool found;
 	u32 reqflags;
 	u16 size;
 	u8 *data = NULL;
 	int ret;
 
 	/* Find the extension unit. */
+	found = false;
 	list_for_each_entry(entity, &chain->entities, chain) {
 		if (UVC_ENTITY_TYPE(entity) == UVC_VC_EXTENSION_UNIT &&
-		    entity->id == xqry->unit)
+		    entity->id == xqry->unit) {
+			found = true;
 			break;
+		}
 	}
 
-	if (entity->id != xqry->unit) {
+	if (!found) {
 		uvc_trace(UVC_TRACE_CONTROL, "Extension unit %u not found.\n",
 			xqry->unit);
 		return -ENOENT;
 	}
 
 	/* Find the control and perform delayed initialization if needed. */
+	found = false;
 	for (i = 0; i < entity->ncontrols; ++i) {
 		ctrl = &entity->controls[i];
 		if (ctrl->index == xqry->selector - 1) {
-			found = 1;
+			found = true;
 			break;
 		}
 	}
Signature · 1 line
2.25.1
author maintainer
#57 lore raw

PATCH 58/132 nfc: s3fwrn5: Add missing CRYPTO_HASH dependency

In reply to Sasha Levin

From: Krzysztof Kozlowski <[email protected]>

[ Upstream commit 4aa62c62d4c41d71b2bda5ed01b78961829ee93c ]

The driver uses crypto hash functions so it needs to select CRYPTO_HASH. This fixes build errors:

arc-linux-ld: drivers/nfc/s3fwrn5/firmware.o: in function `s3fwrn5_fw_download':
firmware.c:(.text+0x152): undefined reference to `crypto_alloc_shash'

---
 drivers/nfc/s3fwrn5/Kconfig | 1 +
 1 file changed, 1 insertion(+)
drivers/nfc/s3fwrn5/Kconfig +1 -0
index af9d18690afeb..3f8b6da582803 100644
@@ -2,6 +2,7 @@
 config NFC_S3FWRN5
 	tristate
 	select CRYPTO
+	select CRYPTO_HASH
 	help
 	  Core driver for Samsung S3FWRN5 NFC chip. Contains core utilities
 	  of chip. It's intended to be used by PHYs to avoid duplicating lots
Signature · 1 line
2.25.1
author maintainer
#58 lore raw

PATCH 59/132 selftests/bpf: Define string const as global for test_sysctl_prog.c

In reply to Sasha Levin

From: Yonghong Song <[email protected]>

[ Upstream commit 6e057fc15a2da4ee03eb1fa6889cf687e690106e ]

When tweaking llvm optimizations, I found that selftest build failed
with the following error:
libbpf: elf: skipping unrecognized data section(6) .rodata.str1.1
libbpf: prog 'sysctl_tcp_mem': bad map relo against '.L__const.is_tcp_mem.tcp_mem_name'

          in section '.rodata.str1.1'

Error: failed to open BPF object file: Relocation failed
make: *** [/work/net-next/tools/testing/selftests/bpf/test_sysctl_prog.skel.h] Error 255
make: *** Deleting file `/work/net-next/tools/testing/selftests/bpf/test_sysctl_prog.skel.h'

The local string constant "tcp_mem_name" is put into '.rodata.str1.1' section which libbpf cannot handle. Using untweaked upstream llvm, "tcp_mem_name" is completely inlined after loop unrolling.

Commit 7fb5eefd7639 ("selftests/bpf: Fix test_sysctl_loop{1, 2} failure due to clang change") solved a similar problem by defining the string const as a global. Let us do the same here
for test_sysctl_prog.c so it can weather future potential llvm changes.

---
 tools/testing/selftests/bpf/progs/test_sysctl_prog.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
tools/testing/selftests/bpf/progs/test_sysctl_prog.c +2 -2
index 50525235380e8..5489823c83fc2 100644
@@ -19,11 +19,11 @@
 #define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
 #endif
 
+const char tcp_mem_name[] = "net/ipv4/tcp_mem";
 static __always_inline int is_tcp_mem(struct bpf_sysctl *ctx)
 {
-	char tcp_mem_name[] = "net/ipv4/tcp_mem";
 	unsigned char i;
-	char name[64];
+	char name[sizeof(tcp_mem_name)];
 	int ret;
 
 	memset(name, 0, sizeof(name));
Signature · 1 line
2.25.1
author maintainer
#59 lore raw

PATCH 60/132 selinux: access policycaps with READ_ONCE/WRITE_ONCE

In reply to Sasha Levin

From: Stephen Smalley <[email protected]>

[ Upstream commit e8ba53d0023a76ba0f50e6ee3e6288c5442f9d33 ]

Use READ_ONCE/WRITE_ONCE for all accesses to the selinux_state.policycaps booleans to prevent compiler mischief.

---
 security/selinux/include/security.h | 14 +++++++-------
 security/selinux/ss/services.c      |  3 ++-
 2 files changed, 9 insertions(+), 8 deletions(-)
security/selinux/include/security.h +7 -7
index b0e02cfe3ce14..8a432f646967e 100644
@@ -177,49 +177,49 @@ static inline bool selinux_policycap_netpeer(void)
 {
 	struct selinux_state *state = &selinux_state;
 
-	return state->policycap[POLICYDB_CAPABILITY_NETPEER];
+	return READ_ONCE(state->policycap[POLICYDB_CAPABILITY_NETPEER]);
 }
 
 static inline bool selinux_policycap_openperm(void)
 {
 	struct selinux_state *state = &selinux_state;
 
-	return state->policycap[POLICYDB_CAPABILITY_OPENPERM];
+	return READ_ONCE(state->policycap[POLICYDB_CAPABILITY_OPENPERM]);
 }
 
 static inline bool selinux_policycap_extsockclass(void)
 {
 	struct selinux_state *state = &selinux_state;
 
-	return state->policycap[POLICYDB_CAPABILITY_EXTSOCKCLASS];
+	return READ_ONCE(state->policycap[POLICYDB_CAPABILITY_EXTSOCKCLASS]);
 }
 
 static inline bool selinux_policycap_alwaysnetwork(void)
 {
 	struct selinux_state *state = &selinux_state;
 
-	return state->policycap[POLICYDB_CAPABILITY_ALWAYSNETWORK];
+	return READ_ONCE(state->policycap[POLICYDB_CAPABILITY_ALWAYSNETWORK]);
 }
 
 static inline bool selinux_policycap_cgroupseclabel(void)
 {
 	struct selinux_state *state = &selinux_state;
 
-	return state->policycap[POLICYDB_CAPABILITY_CGROUPSECLABEL];
+	return READ_ONCE(state->policycap[POLICYDB_CAPABILITY_CGROUPSECLABEL]);
 }
 
 static inline bool selinux_policycap_nnp_nosuid_transition(void)
 {
 	struct selinux_state *state = &selinux_state;
 
-	return state->policycap[POLICYDB_CAPABILITY_NNP_NOSUID_TRANSITION];
+	return READ_ONCE(state->policycap[POLICYDB_CAPABILITY_NNP_NOSUID_TRANSITION]);
 }
 
 static inline bool selinux_policycap_genfs_seclabel_symlinks(void)
 {
 	struct selinux_state *state = &selinux_state;
 
-	return state->policycap[POLICYDB_CAPABILITY_GENFS_SECLABEL_SYMLINKS];
+	return READ_ONCE(state->policycap[POLICYDB_CAPABILITY_GENFS_SECLABEL_SYMLINKS]);
 }
 
 int security_mls_enabled(struct selinux_state *state);
security/selinux/ss/services.c +2 -1
index ef0afd878bfca..04d1afe01838b 100644
@@ -2103,7 +2103,8 @@ static void security_load_policycaps(struct selinux_state *state)
 	struct ebitmap_node *node;
 
 	for (i = 0; i < ARRAY_SIZE(state->policycap); i++)
-		state->policycap[i] = ebitmap_get_bit(&p->policycaps, i);
+		WRITE_ONCE(state->policycap[i],
+			ebitmap_get_bit(&p->policycaps, i));
 
 	for (i = 0; i < ARRAY_SIZE(selinux_policycap_names); i++)
 		pr_info("SELinux:  policy capability %s=%d\n",
Signature · 1 line
2.25.1
author maintainer
#60 lore raw

PATCH 61/132 samples/bpf: Fix possible deadlock in xdpsock

In reply to Sasha Levin

From: Magnus Karlsson <[email protected]>

[ Upstream commit 5a2a0dd88f0f267ac5953acd81050ae43a82201f ]

Fix a possible deadlock in the l2fwd application in xdpsock that can occur when there is no space in the Tx ring. There are two ways to get the kernel to consume entries in the Tx ring: calling sendto() to make it send packets and freeing entries from the completion ring, as the kernel will not send a packet if there is no space for it to add a completion entry in the completion ring. The Tx loop in l2fwd only used to call sendto(). This patches adds cleaning the completion ring in that loop.

---
 samples/bpf/xdpsock_user.c | 1 +
 1 file changed, 1 insertion(+)
samples/bpf/xdpsock_user.c +1 -0
index c91e91362a0c6..a2f8033ab9c3d 100644
@@ -1028,6 +1028,7 @@ static void l2fwd(struct xsk_socket_info *xsk, struct pollfd *fds)
 	while (ret != rcvd) {
 		if (ret < 0)
 			exit_with_error(-ret);
+		complete_tx_l2fwd(xsk, fds);
 		if (xsk_ring_prod__needs_wakeup(&xsk->tx))
 			kick_tx(xsk);
 		ret = xsk_ring_prod__reserve(&xsk->tx, rcvd, &idx_tx);
Signature · 1 line
2.25.1
author maintainer
#61 lore raw

PATCH 62/132 drm/amd/display: Check clock table return

In reply to Sasha Levin

From: Rodrigo Siqueira <[email protected]>

[ Upstream commit 4b4f21ff7f5d11bb77e169b306dcbc5b216f5db5 ]

During the load processes for Renoir, our display code needs to retrieve the SMU clock and voltage table, however, this operation can fail which means that we have to check this scenario. Currently, we are not handling this case properly and as a result, we have seen the following dmesg log during the boot:

RIP: 0010:rn_clk_mgr_construct+0x129/0x3d0 [amdgpu]
...
Call Trace:
 dc_clk_mgr_create+0x16a/0x1b0 [amdgpu]
 dc_create+0x231/0x760 [amdgpu]

This commit fixes this issue by checking the return status retrieved from the clock table before try to populate any bandwidth.

---
 drivers/gpu/drm/amd/display/dc/clk_mgr/dcn21/rn_clk_mgr.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)
drivers/gpu/drm/amd/display/dc/clk_mgr/dcn21/rn_clk_mgr.c +5 -2
index 24c5765890fa7..14f21a7307791 100644
@@ -699,6 +699,7 @@ void rn_clk_mgr_construct(
 {
 	struct dc_debug_options *debug = &ctx->dc->debug;
 	struct dpm_clocks clock_table = { 0 };
+	enum pp_smu_status status = 0;
 
 	clk_mgr->base.ctx = ctx;
 	clk_mgr->base.funcs = &dcn21_funcs;
@@ -751,8 +752,10 @@ void rn_clk_mgr_construct(
 	clk_mgr->base.bw_params = &rn_bw_params;
 
 	if (pp_smu && pp_smu->rn_funcs.get_dpm_clock_table) {
-		pp_smu->rn_funcs.get_dpm_clock_table(&pp_smu->rn_funcs.pp_smu, &clock_table);
-		if (ctx->dc_bios && ctx->dc_bios->integrated_info) {
+		status = pp_smu->rn_funcs.get_dpm_clock_table(&pp_smu->rn_funcs.pp_smu, &clock_table);
+
+		if (status == PP_SMU_RESULT_OK &&
+		    ctx->dc_bios && ctx->dc_bios->integrated_info) {
 			rn_clk_mgr_helper_populate_bw_params (clk_mgr->base.bw_params, &clock_table, ctx->dc_bios->integrated_info);
 		}
 	}
Signature · 6 lines
2.25.1

_______________________________________________
amd-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
author maintainer
#62 lore raw

PATCH 63/132 riscv: Define AT_VECTOR_SIZE_ARCH for ARCH_DLINFO

In reply to Sasha Levin

From: Zong Li <[email protected]>

[ Upstream commit b5fca7c55f9fbab5ad732c3bce00f31af6ba5cfa ]

AT_VECTOR_SIZE_ARCH should be defined with the maximum number of NEW_AUX_ENT entries that ARCH_DLINFO can contain, but it wasn't defined for RISC-V at all even though ARCH_DLINFO will contain one NEW_AUX_ENT for the VDSO address.

---
 arch/riscv/include/uapi/asm/auxvec.h | 3 +++
 1 file changed, 3 insertions(+)
arch/riscv/include/uapi/asm/auxvec.h +3 -0
index d86cb17bbabe6..22e0ae8884061 100644
@@ -10,4 +10,7 @@
 /* vDSO location */
 #define AT_SYSINFO_EHDR 33
 
+/* entries in ARCH_DLINFO */
+#define AT_VECTOR_SIZE_ARCH	1
+
 #endif /* _UAPI_ASM_RISCV_AUXVEC_H */
Signature · 1 line
2.25.1
author maintainer
#63 lore raw

PATCH 64/132 cpufreq: sti-cpufreq: add stih418 support

In reply to Sasha Levin

From: Alain Volmat <[email protected]>

[ Upstream commit 01a163c52039e9426c7d3d3ab16ca261ad622597 ]

The STiH418 can be controlled the same way as STiH407 & STiH410 regarding cpufreq.

---
 drivers/cpufreq/sti-cpufreq.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
drivers/cpufreq/sti-cpufreq.c +4 -2
index 8f16bbb164b84..2855b7878a204 100644
@@ -141,7 +141,8 @@ static const struct reg_field sti_stih407_dvfs_regfields[DVFS_MAX_REGFIELDS] = {
 static const struct reg_field *sti_cpufreq_match(void)
 {
 	if (of_machine_is_compatible("st,stih407") ||
-	    of_machine_is_compatible("st,stih410"))
+	    of_machine_is_compatible("st,stih410") ||
+	    of_machine_is_compatible("st,stih418"))
 		return sti_stih407_dvfs_regfields;
 
 	return NULL;
@@ -258,7 +259,8 @@ static int sti_cpufreq_init(void)
 	int ret;
 
 	if ((!of_machine_is_compatible("st,stih407")) &&
-		(!of_machine_is_compatible("st,stih410")))
+		(!of_machine_is_compatible("st,stih410")) &&
+		(!of_machine_is_compatible("st,stih418")))
 		return -ENODEV;
 
 	ddata.cpu = get_cpu_device(0);
Signature · 7 lines
2.25.1


_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
author maintainer
#64 lore raw

PATCH 65/132 USB: adutux: fix debugging

In reply to Sasha Levin

From: Oliver Neukum <[email protected]>

[ Upstream commit c56150c1bc8da5524831b1dac2eec3c67b89f587 ]

Handling for removal of the controller was missing at one place. Add it.

---
 drivers/usb/misc/adutux.c | 1 +
 1 file changed, 1 insertion(+)
drivers/usb/misc/adutux.c +1 -0
index d8d157c4c271d..96495fcd952aa 100644
@@ -209,6 +209,7 @@ static void adu_interrupt_out_callback(struct urb *urb)
 
 	if (status != 0) {
 		if ((status != -ENOENT) &&
+		    (status != -ESHUTDOWN) &&
 		    (status != -ECONNRESET)) {
 			dev_dbg(&dev->udev->dev,
 				"%s :nonzero status received: %d\n", __func__,
Signature · 1 line
2.25.1
author maintainer
#65 lore raw

PATCH 66/132 uio: free uio id after uio file node is freed

In reply to Sasha Levin

From: Lang Dai <[email protected]>

[ Upstream commit 8fd0e2a6df262539eaa28b0a2364cca10d1dc662 ]

uio_register_device() do two things.
1) get an uio id from a global pool, e.g. the id is <A>
2) create file nodes like /sys/class/uio/uio<A>

uio_unregister_device() do two things.
1) free the uio id <A> and return it to the global pool
2) free the file node /sys/class/uio/uio<A>

There is a situation is that one worker is calling uio_unregister_device(), and another worker is calling uio_register_device().
If the two workers are X and Y, they go as below sequence,
1) X free the uio id <AAA>
2) Y get an uio id <AAA>
3) Y create file node /sys/class/uio/uio<AAA>
4) X free the file note /sys/class/uio/uio<AAA>
Then it will failed at the 3rd step and cause the phenomenon we saw as it is creating a duplicated file node.

Failure reports as follows:
sysfs: cannot create duplicate filename '/class/uio/uio10'

Call Trace:
   sysfs_do_create_link_sd.isra.2+0x9e/0xb0
   sysfs_create_link+0x25/0x40
   device_add+0x2c4/0x640
   __uio_register_device+0x1c5/0x576 [uio]
   adf_uio_init_bundle_dev+0x231/0x280 [intel_qat]
   adf_uio_register+0x1c0/0x340 [intel_qat]
   adf_dev_start+0x202/0x370 [intel_qat]
   adf_dev_start_async+0x40/0xa0 [intel_qat]
   process_one_work+0x14d/0x410
   worker_thread+0x4b/0x460
   kthread+0x105/0x140
 ? process_one_work+0x410/0x410
 ? kthread_bind+0x40/0x40
 ret_from_fork+0x1f/0x40
 Code: 85 c0 48 89 c3 74 12 b9 00 10 00 00 48 89 c2 31 f6 4c 89 ef
 e8 ec c4 ff ff 4c 89 e2 48 89 de 48 c7 c7 e8 b4 ee b4 e8 6a d4 d7
 ff <0f> 0b 48 89 df e8 20 fa f3 ff 5b 41 5c 41 5d 5d c3 66 0f 1f 84
---[ end trace a7531c1ed5269e84 ]---
 c6xxvf b002:00:00.0: Failed to register UIO devices
 c6xxvf b002:00:00.0: Failed to register UIO devices
---
 drivers/uio/uio.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/uio/uio.c +2 -2
index 73efb80815db8..6dca744e39e95 100644
@@ -1048,8 +1048,6 @@ void uio_unregister_device(struct uio_info *info)
 
 	idev = info->uio_dev;
 
-	uio_free_minor(idev);
-
 	mutex_lock(&idev->info_lock);
 	uio_dev_del_attributes(idev);
 
@@ -1064,6 +1062,8 @@ void uio_unregister_device(struct uio_info *info)
 
 	device_unregister(&idev->dev);
 
+	uio_free_minor(idev);
+
 	return;
 }
 EXPORT_SYMBOL_GPL(uio_unregister_device);
Signature · 1 line
2.25.1
author maintainer
#66 lore raw

PATCH 67/132 coresight: Make sysfs functional on topologies with per core sink

In reply to Sasha Levin

From: Linu Cherian <[email protected]>

[ Upstream commit 6d578258b955fc8888e1bbd9a8fefe7b10065a84 ]

Coresight driver assumes sink is common across all the ETMs, and tries to build a path between ETM and the first enabled sink found using bus based search. This breaks sysFS usage on implementations that has multiple per core sinks in enabled state.

To fix this, coresight_get_enabled_sink API is updated to do a connection based search starting from the given source, instead of bus based search.
With sink selection using sysfs depecrated for perf interface, provision for reset is removed as well in this API.

---
 drivers/hwtracing/coresight/coresight-priv.h |  3 +-
 drivers/hwtracing/coresight/coresight.c      | 62 +++++++++-----------
 2 files changed, 29 insertions(+), 36 deletions(-)
drivers/hwtracing/coresight/coresight-priv.h +2 -1
index 36c943ae94d52..e383bc72143d8 100644
@@ -148,7 +148,8 @@ static inline void coresight_write_reg_pair(void __iomem *addr, u64 val,
 void coresight_disable_path(struct list_head *path);
 int coresight_enable_path(struct list_head *path, u32 mode, void *sink_data);
 struct coresight_device *coresight_get_sink(struct list_head *path);
-struct coresight_device *coresight_get_enabled_sink(bool reset);
+struct coresight_device *
+coresight_get_enabled_sink(struct coresight_device *source);
 struct coresight_device *coresight_get_sink_by_id(u32 id);
 struct list_head *coresight_build_path(struct coresight_device *csdev,
 				       struct coresight_device *sink);
drivers/hwtracing/coresight/coresight.c +27 -35

88 lines not on this page · raw message

Signature · 7 lines
2.25.1


_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
author maintainer
#67 lore raw

PATCH 68/132 drm/amdgpu: No sysfs, not an error condition

In reply to Sasha Levin

From: Luben Tuikov <[email protected]>

[ Upstream commit 5aea5327ea2ddf544cbeff096f45fc2319b0714e ]

Not being able to create amdgpu sysfs attributes is not a fatal error warranting not to continue to try to bring up the display. Thus, if we get an error trying to create amdgpu sysfs attrs, report it and continue on to try to bring up
a display.

---
 drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c +1 -3
index a027a8f7b2819..21c56d5b05999 100644
@@ -3275,10 +3275,8 @@ int amdgpu_device_init(struct amdgpu_device *adev,
 			   msecs_to_jiffies(AMDGPU_RESUME_MS));
 
 	r = sysfs_create_files(&adev->dev->kobj, amdgpu_dev_attributes);
-	if (r) {
+	if (r)
 		dev_err(adev->dev, "Could not create amdgpu device attr\n");
-		return r;
-	}
 
 	if (IS_ENABLED(CONFIG_PERF_EVENTS))
 		r = amdgpu_pmu_init(adev);
Signature · 6 lines
2.25.1

_______________________________________________
amd-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
author maintainer
#68 lore raw

PATCH 69/132 mac80211: add missing queue/hash initialization to 802.3 xmit

In reply to Sasha Levin

From: Felix Fietkau <[email protected]>

[ Upstream commit 5f8d69eaab1915df97f4f2aca89ea16abdd092d5 ]

Fixes AQL for encap-offloaded tx

---
 net/mac80211/tx.c | 6 ++++++
 1 file changed, 6 insertions(+)
net/mac80211/tx.c +6 -0
index 3529d13680682..28758a5b5e888 100644
@@ -4212,6 +4212,12 @@ static void ieee80211_8023_xmit(struct ieee80211_sub_if_data *sdata,
 	if (is_zero_ether_addr(ra))
 		goto out_free;
 
+	if (local->ops->wake_tx_queue) {
+		u16 queue = __ieee80211_select_queue(sdata, sta, skb);
+		skb_set_queue_mapping(skb, queue);
+		skb_get_hash(skb);
+	}
+
 	multicast = is_multicast_ether_addr(ra);
 
 	if (sta)
Signature · 1 line
2.25.1
author maintainer
#69 lore raw

PATCH 70/132 usb: xhci: omit duplicate actions when suspending a runtime suspended host.

In reply to Sasha Levin

From: Peter Chen <[email protected]>

[ Upstream commit 18a367e8947d72dd91b6fc401e88a2952c6363f7 ]

If the xhci-plat.c is the platform driver, after the runtime pm is enabled, the xhci_suspend is called if nothing is connected on the port. When the system goes to suspend, it will call xhci_suspend again if USB wakeup is enabled.

Since the runtime suspend wakeup setting is not always the same as system suspend wakeup setting, eg, at runtime suspend we always need wakeup if the controller is in low power mode; but at system suspend, we may not need wakeup. So, we move the judgement after changing wakeup setting.

[commit message rewording -Mathias]

---
 drivers/usb/host/xhci.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)
drivers/usb/host/xhci.c +5 -2
index 113ab5d3cbfe5..d1a63715ed250 100644
@@ -982,12 +982,15 @@ int xhci_suspend(struct xhci_hcd *xhci, bool do_wakeup)
 			xhci->shared_hcd->state != HC_STATE_SUSPENDED)
 		return -EINVAL;
 
-	xhci_dbc_suspend(xhci);
-
 	/* Clear root port wake on bits if wakeup not allowed. */
 	if (!do_wakeup)
 		xhci_disable_port_wake_on_bits(xhci);
 
+	if (!HCD_HW_ACCESSIBLE(hcd))
+		return 0;
+
+	xhci_dbc_suspend(xhci);
+
 	/* Don't poll the roothubs on bus suspend. */
 	xhci_dbg(xhci, "%s: stopping port polling.\n", __func__);
 	clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
Signature · 1 line
2.25.1
author maintainer
#70 lore raw

PATCH 71/132 SUNRPC: Mitigate cond_resched() in xprt_transmit()

In reply to Sasha Levin

From: Chuck Lever <[email protected]>

[ Upstream commit 6f9f17287e78e5049931af2037b15b26d134a32a ]

The original purpose of this expensive call is to prevent a long queue of requests from blocking other work.

The cond_resched() call is unnecessary after just a single send operation.

For longer queues, instead of invoking the kernel scheduler, simply release the transport send lock and return to the RPC scheduler.

---
 net/sunrpc/xprt.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
net/sunrpc/xprt.c +4 -2
index d5cc5db9dbf39..b44099958c8bb 100644
@@ -1511,10 +1511,13 @@ xprt_transmit(struct rpc_task *task)
 {
 	struct rpc_rqst *next, *req = task->tk_rqstp;
 	struct rpc_xprt	*xprt = req->rq_xprt;
-	int status;
+	int counter, status;
 
 	spin_lock(&xprt->queue_lock);
+	counter = 0;
 	while (!list_empty(&xprt->xmit_queue)) {
+		if (++counter == 20)
+			break;
 		next = list_first_entry(&xprt->xmit_queue,
 				struct rpc_rqst, rq_xmit);
 		xprt_pin_rqst(next);
@@ -1522,7 +1525,6 @@ xprt_transmit(struct rpc_task *task)
 		status = xprt_request_transmit(next, task);
 		if (status == -EBADMSG && next != req)
 			status = 0;
-		cond_resched();
 		spin_lock(&xprt->queue_lock);
 		xprt_unpin_rqst(next);
 		if (status == 0) {
Signature · 1 line
2.25.1
author maintainer
#71 lore raw

PATCH 72/132 cpuidle: tegra: Correctly handle result of arm_cpuidle_simple_enter()

In reply to Sasha Levin

From: Dmitry Osipenko <[email protected]>

[ Upstream commit 1170433e6611402b869c583fa1fbfd85106ff066 ]

The enter() callback of CPUIDLE drivers returns index of the entered idle state on success or a negative value on failure. The negative value could any negative value, i.e. it doesn't necessarily needs to be a error code. That's because CPUIDLE core only cares about the fact of failure and not about the reason of the enter() failure.

Like every other enter() callback, the arm_cpuidle_simple_enter() returns the entered idle-index on success. Unlike some of other drivers, it never fails. It happened that TEGRA_C1=index=err=0 in the code of cpuidle-tegra driver, and thus, there is no problem for the cpuidle-tegra driver created by the typo in the code which assumes that the arm_cpuidle_simple_enter() returns a error code.

The arm_cpuidle_simple_enter() also may return a -ENODEV error if CPU_IDLE is disabled in a kernel's config, but all CPUIDLE drivers are disabled if CPU_IDLE is disabled, including the cpuidle-tegra driver. So we can't ever see the error code from arm_cpuidle_simple_enter() today.

Of course the code may get some changes in the future and then the typo may transform into a real bug, so let's correct the typo! The tegra_cpuidle_state_enter() is now changed to make it return the entered idle-index on success and negative error code on fail, which puts it on par with the arm_cpuidle_simple_enter(), making code consistent in regards to the error handling.

This patch fixes a minor typo in the code, it doesn't fix any bugs.

---
 drivers/cpuidle/cpuidle-tegra.c | 34 +++++++++++++++++++--------------
 1 file changed, 20 insertions(+), 14 deletions(-)
drivers/cpuidle/cpuidle-tegra.c +20 -14
index 150045849d782..30e6816c6737a 100644
@@ -172,7 +172,7 @@ static int tegra_cpuidle_coupled_barrier(struct cpuidle_device *dev)
 static int tegra_cpuidle_state_enter(struct cpuidle_device *dev,
 				     int index, unsigned int cpu)
 {
-	int ret;
+	int err;
 
 	/*
 	 * CC6 state is the "CPU cluster power-off" state.  In order to
@@ -183,9 +183,9 @@ static int tegra_cpuidle_state_enter(struct cpuidle_device *dev,
 	 * CPU cores, GIC and L2 cache).
 	 */
 	if (index == TEGRA_CC6) {
-		ret = tegra_cpuidle_coupled_barrier(dev);
-		if (ret)
-			return ret;
+		err = tegra_cpuidle_coupled_barrier(dev);
+		if (err)
+			return err;
 	}
 
 	local_fiq_disable();
@@ -194,15 +194,15 @@ static int tegra_cpuidle_state_enter(struct cpuidle_device *dev,
 
 	switch (index) {
 	case TEGRA_C7:
-		ret = tegra_cpuidle_c7_enter();
+		err = tegra_cpuidle_c7_enter();
 		break;
 
 	case TEGRA_CC6:
-		ret = tegra_cpuidle_cc6_enter(cpu);
+		err = tegra_cpuidle_cc6_enter(cpu);
 		break;
 
 	default:
-		ret = -EINVAL;
+		err = -EINVAL;
 		break;
 	}
 
@@ -210,7 +210,7 @@ static int tegra_cpuidle_state_enter(struct cpuidle_device *dev,
 	tegra_pm_clear_cpu_in_lp2();
 	local_fiq_enable();
 
-	return ret;
+	return err ?: index;
 }
 
 static int tegra_cpuidle_adjust_state_index(int index, unsigned int cpu)
@@ -236,21 +236,27 @@ static int tegra_cpuidle_enter(struct cpuidle_device *dev,
 			       int index)
 {
 	unsigned int cpu = cpu_logical_map(dev->cpu);
-	int err;
+	int ret;
 
 	index = tegra_cpuidle_adjust_state_index(index, cpu);
 	if (dev->states_usage[index].disable)
 		return -1;
 
 	if (index == TEGRA_C1)
-		err = arm_cpuidle_simple_enter(dev, drv, index);
+		ret = arm_cpuidle_simple_enter(dev, drv, index);
 	else
-		err = tegra_cpuidle_state_enter(dev, index, cpu);
+		ret = tegra_cpuidle_state_enter(dev, index, cpu);
 
-	if (err && (err != -EINTR || index != TEGRA_CC6))
-		pr_err_once("failed to enter state %d err: %d\n", index, err);
+	if (ret < 0) {
+		if (ret != -EINTR || index != TEGRA_CC6)
+			pr_err_once("failed to enter state %d err: %d\n",
+				    index, ret);
+		index = -1;
+	} else {
+		index = ret;
+	}
 
-	return err ? -1 : index;
+	return index;
 }
 
 static void tegra114_enter_s2idle(struct cpuidle_device *dev,
Signature · 1 line
2.25.1
author maintainer
#72 lore raw

PATCH 73/132 arm64/mm: return cpu_all_mask when node is NUMA_NO_NODE

In reply to Sasha Levin

From: Zhengyuan Liu <[email protected]>

[ Upstream commit a194c5f2d2b3a05428805146afcabe5140b5d378 ]

The @node passed to cpumask_of_node() can be NUMA_NO_NODE, in that case it will trigger the following WARN_ON(node >= nr_node_ids) due to mismatched data types of @node and @nr_node_ids. Actually we should return cpu_all_mask just like most other architectures do if passed NUMA_NO_NODE.

Also add a similar check to the inline cpumask_of_node() in numa.h.

---
 arch/arm64/include/asm/numa.h | 3 +++
 arch/arm64/mm/numa.c          | 6 +++++-
 2 files changed, 8 insertions(+), 1 deletion(-)
arch/arm64/include/asm/numa.h +3 -0
index 626ad01e83bf0..dd870390d639f 100644
@@ -25,6 +25,9 @@ const struct cpumask *cpumask_of_node(int node);
 /* Returns a pointer to the cpumask of CPUs on Node 'node'. */
 static inline const struct cpumask *cpumask_of_node(int node)
 {
+	if (node == NUMA_NO_NODE)
+		return cpu_all_mask;
+
 	return node_to_cpumask_map[node];
 }
 #endif
arch/arm64/mm/numa.c +5 -1
index aafcee3e3f7ef..58c83c2b8748f 100644
@@ -46,7 +46,11 @@ EXPORT_SYMBOL(node_to_cpumask_map);
  */
 const struct cpumask *cpumask_of_node(int node)
 {
-	if (WARN_ON(node >= nr_node_ids))
+
+	if (node == NUMA_NO_NODE)
+		return cpu_all_mask;
+
+	if (WARN_ON(node < 0 || node >= nr_node_ids))
 		return cpu_none_mask;
 
 	if (WARN_ON(node_to_cpumask_map[node] == NULL))
Signature · 7 lines
2.25.1


_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
author maintainer
#73 lore raw

PATCH 74/132 can: flexcan: disable clocks during stop mode

In reply to Sasha Levin

From: Joakim Zhang <[email protected]>

[ Upstream commit 02f71c6605e1f8259c07f16178330db766189a74 ]

Disable clocks while CAN core is in stop mode.

---
 drivers/net/can/flexcan.c | 30 ++++++++++++++++++++----------
 1 file changed, 20 insertions(+), 10 deletions(-)
drivers/net/can/flexcan.c +20 -10
index 94d10ec954a05..de7599d99b4b5 100644
@@ -1700,8 +1700,6 @@ static int __maybe_unused flexcan_suspend(struct device *device)
 			err = flexcan_chip_disable(priv);
 			if (err)
 				return err;
-
-			err = pm_runtime_force_suspend(device);
 		}
 		netif_stop_queue(dev);
 		netif_device_detach(dev);
@@ -1727,10 +1725,6 @@ static int __maybe_unused flexcan_resume(struct device *device)
 			if (err)
 				return err;
 		} else {
-			err = pm_runtime_force_resume(device);
-			if (err)
-				return err;
-
 			err = flexcan_chip_enable(priv);
 		}
 	}
@@ -1761,8 +1755,16 @@ static int __maybe_unused flexcan_noirq_suspend(struct device *device)
 	struct net_device *dev = dev_get_drvdata(device);
 	struct flexcan_priv *priv = netdev_priv(dev);
 
-	if (netif_running(dev) && device_may_wakeup(device))
-		flexcan_enable_wakeup_irq(priv, true);
+	if (netif_running(dev)) {
+		int err;
+
+		if (device_may_wakeup(device))
+			flexcan_enable_wakeup_irq(priv, true);
+
+		err = pm_runtime_force_suspend(device);
+		if (err)
+			return err;
+	}
 
 	return 0;
 }
@@ -1772,8 +1774,16 @@ static int __maybe_unused flexcan_noirq_resume(struct device *device)
 	struct net_device *dev = dev_get_drvdata(device);
 	struct flexcan_priv *priv = netdev_priv(dev);
 
-	if (netif_running(dev) && device_may_wakeup(device))
-		flexcan_enable_wakeup_irq(priv, false);
+	if (netif_running(dev)) {
+		int err;
+
+		err = pm_runtime_force_resume(device);
+		if (err)
+			return err;
+
+		if (device_may_wakeup(device))
+			flexcan_enable_wakeup_irq(priv, false);
+	}
 
 	return 0;
 }
Signature · 1 line
2.25.1
author maintainer
#74 lore raw

PATCH 75/132 habanalabs: remove security from ARB_MST_QUIET register

In reply to Sasha Levin

From: farah kassabri <[email protected]>

[ Upstream commit acd330c141b4c49f468f00719ebc944656061eac ]

Allow user application to write to this register in order to be able to configure the quiet period of the QMAN between grants.

---
 .../misc/habanalabs/gaudi/gaudi_security.c    | 55 +++++++------------
 1 file changed, 19 insertions(+), 36 deletions(-)
drivers/misc/habanalabs/gaudi/gaudi_security.c +19 -36
index 6a351e31fa6af..efec4b7057048 100644
@@ -832,8 +832,7 @@ static void gaudi_init_mme_protection_bits(struct hl_device *hdev)
 			PROT_BITS_OFFS;
 	word_offset = ((mmMME0_QM_ARB_MST_CHOISE_PUSH_OFST_23 &
 			PROT_BITS_OFFS) >> 7) << 2;
-	mask = 1 << ((mmMME0_QM_ARB_MST_QUIET_PER & 0x7F) >> 2);
-	mask |= 1 << ((mmMME0_QM_ARB_SLV_CHOISE_WDT & 0x7F) >> 2);
+	mask = 1 << ((mmMME0_QM_ARB_SLV_CHOISE_WDT & 0x7F) >> 2);
 	mask |= 1 << ((mmMME0_QM_ARB_MSG_MAX_INFLIGHT & 0x7F) >> 2);
 	mask |= 1 << ((mmMME0_QM_ARB_MSG_AWUSER_31_11 & 0x7F) >> 2);
 	mask |= 1 << ((mmMME0_QM_ARB_MSG_AWUSER_SEC_PROP & 0x7F) >> 2);
@@ -1312,8 +1311,7 @@ static void gaudi_init_mme_protection_bits(struct hl_device *hdev)
 			PROT_BITS_OFFS;
 	word_offset = ((mmMME2_QM_ARB_MST_CHOISE_PUSH_OFST_23 &
 			PROT_BITS_OFFS) >> 7) << 2;
-	mask = 1 << ((mmMME2_QM_ARB_MST_QUIET_PER & 0x7F) >> 2);
-	mask |= 1 << ((mmMME2_QM_ARB_SLV_CHOISE_WDT & 0x7F) >> 2);
+	mask = 1 << ((mmMME2_QM_ARB_SLV_CHOISE_WDT & 0x7F) >> 2);
 	mask |= 1 << ((mmMME2_QM_ARB_MSG_MAX_INFLIGHT & 0x7F) >> 2);
 	mask |= 1 << ((mmMME2_QM_ARB_MSG_AWUSER_31_11 & 0x7F) >> 2);
 	mask |= 1 << ((mmMME2_QM_ARB_MSG_AWUSER_SEC_PROP & 0x7F) >> 2);
@@ -1791,8 +1789,7 @@ static void gaudi_init_dma_protection_bits(struct hl_device *hdev)
 	word_offset =
 		((mmDMA0_QM_ARB_MST_CHOISE_PUSH_OFST_23 & PROT_BITS_OFFS) >> 7)
 		<< 2;
-	mask = 1 << ((mmDMA0_QM_ARB_MST_QUIET_PER & 0x7F) >> 2);
-	mask |= 1 << ((mmDMA0_QM_ARB_SLV_CHOISE_WDT & 0x7F) >> 2);
+	mask = 1 << ((mmDMA0_QM_ARB_SLV_CHOISE_WDT & 0x7F) >> 2);
 	mask |= 1 << ((mmDMA0_QM_ARB_MSG_MAX_INFLIGHT & 0x7F) >> 2);
 	mask |= 1 << ((mmDMA0_QM_ARB_MSG_AWUSER_31_11 & 0x7F) >> 2);
 	mask |= 1 << ((mmDMA0_QM_ARB_MSG_AWUSER_SEC_PROP & 0x7F) >> 2);
@@ -2187,8 +2184,7 @@ static void gaudi_init_dma_protection_bits(struct hl_device *hdev)
 	word_offset =
 		((mmDMA1_QM_ARB_MST_CHOISE_PUSH_OFST_23 & PROT_BITS_OFFS) >> 7)
 		<< 2;
-	mask = 1 << ((mmDMA1_QM_ARB_MST_QUIET_PER & 0x7F) >> 2);
-	mask |= 1 << ((mmDMA1_QM_ARB_SLV_CHOISE_WDT & 0x7F) >> 2);
+	mask = 1 << ((mmDMA1_QM_ARB_SLV_CHOISE_WDT & 0x7F) >> 2);
 	mask |= 1 << ((mmDMA1_QM_ARB_MSG_MAX_INFLIGHT & 0x7F) >> 2);
 	mask |= 1 << ((mmDMA1_QM_ARB_MSG_AWUSER_31_11 & 0x7F) >> 2);
 	mask |= 1 << ((mmDMA1_QM_ARB_MSG_AWUSER_SEC_PROP & 0x7F) >> 2);
@@ -2583,8 +2579,7 @@ static void gaudi_init_dma_protection_bits(struct hl_device *hdev)
 	word_offset =
 		((mmDMA2_QM_ARB_MST_CHOISE_PUSH_OFST_23 & PROT_BITS_OFFS) >> 7)
 		<< 2;
-	mask = 1 << ((mmDMA2_QM_ARB_MST_QUIET_PER & 0x7F) >> 2);
-	mask |= 1 << ((mmDMA2_QM_ARB_SLV_CHOISE_WDT & 0x7F) >> 2);
+	mask = 1 << ((mmDMA2_QM_ARB_SLV_CHOISE_WDT & 0x7F) >> 2);
 	mask |= 1 << ((mmDMA2_QM_ARB_MSG_MAX_INFLIGHT & 0x7F) >> 2);
 	mask |= 1 << ((mmDMA2_QM_ARB_MSG_AWUSER_31_11 & 0x7F) >> 2);
 	mask |= 1 << ((mmDMA2_QM_ARB_MSG_AWUSER_SEC_PROP & 0x7F) >> 2);
@@ -2979,8 +2974,7 @@ static void gaudi_init_dma_protection_bits(struct hl_device *hdev)
 	word_offset =
 		((mmDMA3_QM_ARB_MST_CHOISE_PUSH_OFST_23 & PROT_BITS_OFFS) >> 7)
 		<< 2;
-	mask = 1 << ((mmDMA3_QM_ARB_MST_QUIET_PER & 0x7F) >> 2);
-	mask |= 1 << ((mmDMA3_QM_ARB_SLV_CHOISE_WDT & 0x7F) >> 2);
+	mask = 1 << ((mmDMA3_QM_ARB_SLV_CHOISE_WDT & 0x7F) >> 2);
 	mask |= 1 << ((mmDMA3_QM_ARB_MSG_MAX_INFLIGHT & 0x7F) >> 2);
 	mask |= 1 << ((mmDMA3_QM_ARB_MSG_AWUSER_31_11 & 0x7F) >> 2);
 	mask |= 1 << ((mmDMA3_QM_ARB_MSG_AWUSER_SEC_PROP & 0x7F) >> 2);
@@ -3375,8 +3369,7 @@ static void gaudi_init_dma_protection_bits(struct hl_device *hdev)
 	word_offset =
 		((mmDMA4_QM_ARB_MST_CHOISE_PUSH_OFST_23 & PROT_BITS_OFFS) >> 7)
 		<< 2;
-	mask = 1 << ((mmDMA4_QM_ARB_MST_QUIET_PER & 0x7F) >> 2);
-	mask |= 1 << ((mmDMA4_QM_ARB_SLV_CHOISE_WDT & 0x7F) >> 2);
+	mask = 1 << ((mmDMA4_QM_ARB_SLV_CHOISE_WDT & 0x7F) >> 2);
 	mask |= 1 << ((mmDMA4_QM_ARB_MSG_MAX_INFLIGHT & 0x7F) >> 2);
 	mask |= 1 << ((mmDMA4_QM_ARB_MSG_AWUSER_31_11 & 0x7F) >> 2);
 	mask |= 1 << ((mmDMA4_QM_ARB_MSG_AWUSER_SEC_PROP & 0x7F) >> 2);
@@ -3771,8 +3764,7 @@ static void gaudi_init_dma_protection_bits(struct hl_device *hdev)
 	word_offset =
 		((mmDMA5_QM_ARB_MST_CHOISE_PUSH_OFST_23 & PROT_BITS_OFFS) >> 7)
 		<< 2;
-	mask = 1 << ((mmDMA5_QM_ARB_MST_QUIET_PER & 0x7F) >> 2);
-	mask |= 1 << ((mmDMA5_QM_ARB_SLV_CHOISE_WDT & 0x7F) >> 2);
+	mask = 1 << ((mmDMA5_QM_ARB_SLV_CHOISE_WDT & 0x7F) >> 2);
 	mask |= 1 << ((mmDMA5_QM_ARB_MSG_MAX_INFLIGHT & 0x7F) >> 2);
 	mask |= 1 << ((mmDMA5_QM_ARB_MSG_AWUSER_31_11 & 0x7F) >> 2);
 	mask |= 1 << ((mmDMA5_QM_ARB_MSG_AWUSER_SEC_PROP & 0x7F) >> 2);
@@ -4167,8 +4159,8 @@ static void gaudi_init_dma_protection_bits(struct hl_device *hdev)
 	word_offset =
 		((mmDMA6_QM_ARB_MST_CHOISE_PUSH_OFST_23 & PROT_BITS_OFFS) >> 7)
 		<< 2;
-	mask = 1 << ((mmDMA6_QM_ARB_MST_QUIET_PER & 0x7F) >> 2);
-	mask |= 1 << ((mmDMA6_QM_ARB_SLV_CHOISE_WDT & 0x7F) >> 2);
+
+	mask = 1 << ((mmDMA6_QM_ARB_SLV_CHOISE_WDT & 0x7F) >> 2);
 	mask |= 1 << ((mmDMA6_QM_ARB_MSG_MAX_INFLIGHT & 0x7F) >> 2);
 	mask |= 1 << ((mmDMA6_QM_ARB_MSG_AWUSER_31_11 & 0x7F) >> 2);
 	mask |= 1 << ((mmDMA6_QM_ARB_MSG_AWUSER_SEC_PROP & 0x7F) >> 2);
@@ -4563,8 +4555,7 @@ static void gaudi_init_dma_protection_bits(struct hl_device *hdev)
 	word_offset =
 		((mmDMA7_QM_ARB_MST_CHOISE_PUSH_OFST_23 & PROT_BITS_OFFS) >> 7)
 		<< 2;
-	mask = 1 << ((mmDMA7_QM_ARB_MST_QUIET_PER & 0x7F) >> 2);
-	mask |= 1 << ((mmDMA7_QM_ARB_SLV_CHOISE_WDT & 0x7F) >> 2);
+	mask = 1 << ((mmDMA7_QM_ARB_SLV_CHOISE_WDT & 0x7F) >> 2);
 	mask |= 1 << ((mmDMA7_QM_ARB_MSG_MAX_INFLIGHT & 0x7F) >> 2);
 	mask |= 1 << ((mmDMA7_QM_ARB_MSG_AWUSER_31_11 & 0x7F) >> 2);
 	mask |= 1 << ((mmDMA7_QM_ARB_MSG_AWUSER_SEC_PROP & 0x7F) >> 2);
@@ -5492,8 +5483,7 @@ static void gaudi_init_tpc_protection_bits(struct hl_device *hdev)
 
 	word_offset = ((mmTPC0_QM_ARB_MST_CHOISE_PUSH_OFST_23 & PROT_BITS_OFFS)
 								>> 7) << 2;
-	mask = 1 << ((mmTPC0_QM_ARB_MST_QUIET_PER & 0x7F) >> 2);
-	mask |= 1 << ((mmTPC0_QM_ARB_SLV_CHOISE_WDT & 0x7F) >> 2);
+	mask = 1 << ((mmTPC0_QM_ARB_SLV_CHOISE_WDT & 0x7F) >> 2);
 	mask |= 1 << ((mmTPC0_QM_ARB_MSG_MAX_INFLIGHT & 0x7F) >> 2);
 	mask |= 1 << ((mmTPC0_QM_ARB_MSG_AWUSER_31_11 & 0x7F) >> 2);
 	mask |= 1 << ((mmTPC0_QM_ARB_MSG_AWUSER_SEC_PROP & 0x7F) >> 2);
@@ -5948,8 +5938,7 @@ static void gaudi_init_tpc_protection_bits(struct hl_device *hdev)
 
 	word_offset = ((mmTPC1_QM_ARB_MST_CHOISE_PUSH_OFST_23 & PROT_BITS_OFFS)
 								>> 7) << 2;
-	mask = 1 << ((mmTPC1_QM_ARB_MST_QUIET_PER & 0x7F) >> 2);
-	mask |= 1 << ((mmTPC1_QM_ARB_SLV_CHOISE_WDT & 0x7F) >> 2);
+	mask = 1 << ((mmTPC1_QM_ARB_SLV_CHOISE_WDT & 0x7F) >> 2);
 	mask |= 1 << ((mmTPC1_QM_ARB_MSG_MAX_INFLIGHT & 0x7F) >> 2);
 	mask |= 1 << ((mmTPC1_QM_ARB_MSG_AWUSER_31_11 & 0x7F) >> 2);
 	mask |= 1 << ((mmTPC1_QM_ARB_MSG_AWUSER_SEC_PROP & 0x7F) >> 2);
@@ -6403,8 +6392,7 @@ static void gaudi_init_tpc_protection_bits(struct hl_device *hdev)
 								PROT_BITS_OFFS;
 	word_offset = ((mmTPC2_QM_ARB_MST_CHOISE_PUSH_OFST_23 & PROT_BITS_OFFS)
 								>> 7) << 2;
-	mask = 1 << ((mmTPC2_QM_ARB_MST_QUIET_PER & 0x7F) >> 2);
-	mask |= 1 << ((mmTPC2_QM_ARB_SLV_CHOISE_WDT & 0x7F) >> 2);
+	mask = 1 << ((mmTPC2_QM_ARB_SLV_CHOISE_WDT & 0x7F) >> 2);
 	mask |= 1 << ((mmTPC2_QM_ARB_MSG_MAX_INFLIGHT & 0x7F) >> 2);
 	mask |= 1 << ((mmTPC2_QM_ARB_MSG_AWUSER_31_11 & 0x7F) >> 2);
 	mask |= 1 << ((mmTPC2_QM_ARB_MSG_AWUSER_SEC_PROP & 0x7F) >> 2);
@@ -6858,8 +6846,7 @@ static void gaudi_init_tpc_protection_bits(struct hl_device *hdev)
 								PROT_BITS_OFFS;
 	word_offset = ((mmTPC3_QM_ARB_MST_CHOISE_PUSH_OFST_23 & PROT_BITS_OFFS)
 								>> 7) << 2;
-	mask = 1 << ((mmTPC3_QM_ARB_MST_QUIET_PER & 0x7F) >> 2);
-	mask |= 1 << ((mmTPC3_QM_ARB_SLV_CHOISE_WDT & 0x7F) >> 2);
+	mask = 1 << ((mmTPC3_QM_ARB_SLV_CHOISE_WDT & 0x7F) >> 2);
 	mask |= 1 << ((mmTPC3_QM_ARB_MSG_MAX_INFLIGHT & 0x7F) >> 2);
 	mask |= 1 << ((mmTPC3_QM_ARB_MSG_AWUSER_31_11 & 0x7F) >> 2);
 	mask |= 1 << ((mmTPC3_QM_ARB_MSG_AWUSER_SEC_PROP & 0x7F) >> 2);
@@ -7313,8 +7300,7 @@ static void gaudi_init_tpc_protection_bits(struct hl_device *hdev)
 								PROT_BITS_OFFS;
 	word_offset = ((mmTPC4_QM_ARB_MST_CHOISE_PUSH_OFST_23 & PROT_BITS_OFFS)
 								>> 7) << 2;
-	mask = 1 << ((mmTPC4_QM_ARB_MST_QUIET_PER & 0x7F) >> 2);
-	mask |= 1 << ((mmTPC4_QM_ARB_SLV_CHOISE_WDT & 0x7F) >> 2);
+	mask = 1 << ((mmTPC4_QM_ARB_SLV_CHOISE_WDT & 0x7F) >> 2);
 	mask |= 1 << ((mmTPC4_QM_ARB_MSG_MAX_INFLIGHT & 0x7F) >> 2);
 	mask |= 1 << ((mmTPC4_QM_ARB_MSG_AWUSER_31_11 & 0x7F) >> 2);
 	mask |= 1 << ((mmTPC4_QM_ARB_MSG_AWUSER_SEC_PROP & 0x7F) >> 2);
@@ -7768,8 +7754,7 @@ static void gaudi_init_tpc_protection_bits(struct hl_device *hdev)
 								PROT_BITS_OFFS;
 	word_offset = ((mmTPC5_QM_ARB_MST_CHOISE_PUSH_OFST_23 & PROT_BITS_OFFS)
 								>> 7) << 2;
-	mask = 1 << ((mmTPC5_QM_ARB_MST_QUIET_PER & 0x7F) >> 2);
-	mask |= 1 << ((mmTPC5_QM_ARB_SLV_CHOISE_WDT & 0x7F) >> 2);
+	mask = 1 << ((mmTPC5_QM_ARB_SLV_CHOISE_WDT & 0x7F) >> 2);
 	mask |= 1 << ((mmTPC5_QM_ARB_MSG_MAX_INFLIGHT & 0x7F) >> 2);
 	mask |= 1 << ((mmTPC5_QM_ARB_MSG_AWUSER_31_11 & 0x7F) >> 2);
 	mask |= 1 << ((mmTPC5_QM_ARB_MSG_AWUSER_SEC_PROP & 0x7F) >> 2);
@@ -8224,8 +8209,7 @@ static void gaudi_init_tpc_protection_bits(struct hl_device *hdev)
 
 	word_offset = ((mmTPC6_QM_ARB_MST_CHOISE_PUSH_OFST_23 & PROT_BITS_OFFS)
 								>> 7) << 2;
-	mask = 1 << ((mmTPC6_QM_ARB_MST_QUIET_PER & 0x7F) >> 2);
-	mask |= 1 << ((mmTPC6_QM_ARB_SLV_CHOISE_WDT & 0x7F) >> 2);
+	mask = 1 << ((mmTPC6_QM_ARB_SLV_CHOISE_WDT & 0x7F) >> 2);
 	mask |= 1 << ((mmTPC6_QM_ARB_MSG_MAX_INFLIGHT & 0x7F) >> 2);
 	mask |= 1 << ((mmTPC6_QM_ARB_MSG_AWUSER_31_11 & 0x7F) >> 2);
 	mask |= 1 << ((mmTPC6_QM_ARB_MSG_AWUSER_SEC_PROP & 0x7F) >> 2);
@@ -8682,8 +8666,7 @@ static void gaudi_init_tpc_protection_bits(struct hl_device *hdev)
 			PROT_BITS_OFFS;
 	word_offset = ((mmTPC7_QM_ARB_MST_CHOISE_PUSH_OFST_23 & PROT_BITS_OFFS)
 								>> 7) << 2;
-	mask = 1 << ((mmTPC7_QM_ARB_MST_QUIET_PER & 0x7F) >> 2);
-	mask |= 1 << ((mmTPC7_QM_ARB_SLV_CHOISE_WDT & 0x7F) >> 2);
+	mask = 1 << ((mmTPC7_QM_ARB_SLV_CHOISE_WDT & 0x7F) >> 2);
 	mask |= 1 << ((mmTPC7_QM_ARB_MSG_MAX_INFLIGHT & 0x7F) >> 2);
 	mask |= 1 << ((mmTPC7_QM_ARB_MSG_AWUSER_31_11 & 0x7F) >> 2);
 	mask |= 1 << ((mmTPC7_QM_ARB_MSG_AWUSER_SEC_PROP & 0x7F) >> 2);
Signature · 1 line
2.25.1
author maintainer
#75 lore raw

PATCH 76/132 xfs: don't free rt blocks when we're doing a REMAP bunmapi call

In reply to Sasha Levin

From: "Darrick J. Wong" <[email protected]>

[ Upstream commit 8df0fa39bdd86ca81a8d706a6ed9d33cc65ca625 ]

When callers pass XFS_BMAPI_REMAP into xfs_bunmapi, they want the extent to be unmapped from the given file fork without the extent being freed. We do this for non-rt files, but we forgot to do this for realtime files. So far this isn't a big deal since nobody makes a bunmapi call to a rt file with the REMAP flag set, but don't leave a logic bomb.

---
 fs/xfs/libxfs/xfs_bmap.c | 19 ++++++++++++-------
 1 file changed, 12 insertions(+), 7 deletions(-)
fs/xfs/libxfs/xfs_bmap.c +12 -7
index aa784404964a0..5800773213493 100644
@@ -5042,20 +5042,25 @@ xfs_bmap_del_extent_real(
 
 	flags = XFS_ILOG_CORE;
 	if (whichfork == XFS_DATA_FORK && XFS_IS_REALTIME_INODE(ip)) {
-		xfs_fsblock_t	bno;
 		xfs_filblks_t	len;
 		xfs_extlen_t	mod;
 
-		bno = div_u64_rem(del->br_startblock, mp->m_sb.sb_rextsize,
-				  &mod);
-		ASSERT(mod == 0);
 		len = div_u64_rem(del->br_blockcount, mp->m_sb.sb_rextsize,
 				  &mod);
 		ASSERT(mod == 0);
 
-		error = xfs_rtfree_extent(tp, bno, (xfs_extlen_t)len);
-		if (error)
-			goto done;
+		if (!(bflags & XFS_BMAPI_REMAP)) {
+			xfs_fsblock_t	bno;
+
+			bno = div_u64_rem(del->br_startblock,
+					mp->m_sb.sb_rextsize, &mod);
+			ASSERT(mod == 0);
+
+			error = xfs_rtfree_extent(tp, bno, (xfs_extlen_t)len);
+			if (error)
+				goto done;
+		}
+
 		do_fx = 0;
 		nblks = len * mp->m_sb.sb_rextsize;
 		qfield = XFS_TRANS_DQ_RTBCOUNT;
Signature · 1 line
2.25.1
author maintainer
#76 lore raw

PATCH 77/132 xfs: avoid LR buffer overrun due to crafted h_len

In reply to Sasha Levin

From: Gao Xiang <[email protected]>

[ Upstream commit f692d09e9c8fd0f5557c2e87f796a16dd95222b8 ]

Currently, crafted h_len has been blocked for the log header of the tail block in commit a70f9fe52daa ("xfs:
detect and handle invalid iclog size set by mkfs").

However, each log record could still have crafted h_len and cause log record buffer overrun. So let's check h_len vs buffer size for each log record as well.

---
 fs/xfs/xfs_log_recover.c | 39 +++++++++++++++++++--------------------
 1 file changed, 19 insertions(+), 20 deletions(-)
fs/xfs/xfs_log_recover.c +19 -20
index ec015df55b77a..e862f9137bf6e 100644
@@ -2905,7 +2905,8 @@ STATIC int
 xlog_valid_rec_header(
 	struct xlog		*log,
 	struct xlog_rec_header	*rhead,
-	xfs_daddr_t		blkno)
+	xfs_daddr_t		blkno,
+	int			bufsize)
 {
 	int			hlen;
 
@@ -2921,10 +2922,14 @@ xlog_valid_rec_header(
 		return -EFSCORRUPTED;
 	}
 
-	/* LR body must have data or it wouldn't have been written */
+	/*
+	 * LR body must have data (or it wouldn't have been written)
+	 * and h_len must not be greater than LR buffer size.
+	 */
 	hlen = be32_to_cpu(rhead->h_len);
-	if (XFS_IS_CORRUPT(log->l_mp, hlen <= 0 || hlen > INT_MAX))
+	if (XFS_IS_CORRUPT(log->l_mp, hlen <= 0 || hlen > bufsize))
 		return -EFSCORRUPTED;
+
 	if (XFS_IS_CORRUPT(log->l_mp,
 			   blkno > log->l_logBBsize || blkno > INT_MAX))
 		return -EFSCORRUPTED;
@@ -2985,9 +2990,6 @@ xlog_do_recovery_pass(
 			goto bread_err1;
 
 		rhead = (xlog_rec_header_t *)offset;
-		error = xlog_valid_rec_header(log, rhead, tail_blk);
-		if (error)
-			goto bread_err1;
 
 		/*
 		 * xfsprogs has a bug where record length is based on lsunit but
@@ -3002,21 +3004,18 @@ xlog_do_recovery_pass(
 		 */
 		h_size = be32_to_cpu(rhead->h_size);
 		h_len = be32_to_cpu(rhead->h_len);
-		if (h_len > h_size) {
-			if (h_len <= log->l_mp->m_logbsize &&
-			    be32_to_cpu(rhead->h_num_logops) == 1) {
-				xfs_warn(log->l_mp,
+		if (h_len > h_size && h_len <= log->l_mp->m_logbsize &&
+		    rhead->h_num_logops == cpu_to_be32(1)) {
+			xfs_warn(log->l_mp,
 		"invalid iclog size (%d bytes), using lsunit (%d bytes)",
-					 h_size, log->l_mp->m_logbsize);
-				h_size = log->l_mp->m_logbsize;
-			} else {
-				XFS_ERROR_REPORT(__func__, XFS_ERRLEVEL_LOW,
-						log->l_mp);
-				error = -EFSCORRUPTED;
-				goto bread_err1;
-			}
+				 h_size, log->l_mp->m_logbsize);
+			h_size = log->l_mp->m_logbsize;
 		}
 
+		error = xlog_valid_rec_header(log, rhead, tail_blk, h_size);
+		if (error)
+			goto bread_err1;
+
 		if ((be32_to_cpu(rhead->h_version) & XLOG_VERSION_2) &&
 		    (h_size > XLOG_HEADER_CYCLE_SIZE)) {
 			hblks = h_size / XLOG_HEADER_CYCLE_SIZE;
@@ -3097,7 +3096,7 @@ xlog_do_recovery_pass(
 			}
 			rhead = (xlog_rec_header_t *)offset;
 			error = xlog_valid_rec_header(log, rhead,
-						split_hblks ? blk_no : 0);
+					split_hblks ? blk_no : 0, h_size);
 			if (error)
 				goto bread_err2;
 
@@ -3178,7 +3177,7 @@ xlog_do_recovery_pass(
 			goto bread_err2;
 
 		rhead = (xlog_rec_header_t *)offset;
-		error = xlog_valid_rec_header(log, rhead, blk_no);
+		error = xlog_valid_rec_header(log, rhead, blk_no, h_size);
 		if (error)
 			goto bread_err2;
 
Signature · 1 line
2.25.1
author maintainer
#77 lore raw

PATCH 78/132 ACPI: Add out of bounds and numa_off protections to pxm_to_node()

In reply to Sasha Levin

From: Jonathan Cameron <[email protected]>

[ Upstream commit 8a3decac087aa897df5af04358c2089e52e70ac4 ]

The function should check the validity of the pxm value before using it to index the pxm_to_node_map[] array.

Whilst hardening this code may be good in general, the main intent here is to enable following patches that use this function to replace acpi_map_pxm_to_node() for non SRAT usecases which should return NO_NUMA_NODE for PXM entries not matching with those in SRAT.

---
 drivers/acpi/numa/srat.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/acpi/numa/srat.c +1 -1
index 5be5a977da1bf..8ef44ee0d76bd 100644
@@ -31,7 +31,7 @@ int acpi_numa __initdata;
 
 int pxm_to_node(int pxm)
 {
-	if (pxm < 0)
+	if (pxm < 0 || pxm >= MAX_PXM_DOMAINS || numa_off)
 		return NUMA_NO_NODE;
 	return pxm_to_node_map[pxm];
 }
Signature · 1 line
2.25.1
author maintainer
#78 lore raw

PATCH 79/132 genirq: Add stub for set_handle_irq() when !GENERIC_IRQ_MULTI_HANDLER

In reply to Sasha Levin

From: Zhen Lei <[email protected]>

[ Upstream commit ea0c80d1764449acf2f70fdb25aec33800cd0348 ]

In order to avoid compilation errors when a driver references set_handle_irq(), but that the architecture doesn't select GENERIC_IRQ_MULTI_HANDLER, add a stub function that will just WARN_ON_ONCE() if ever used.

---
 include/linux/irq.h | 6 ++++++
 1 file changed, 6 insertions(+)
include/linux/irq.h +6 -0
index 1b7f4dfee35b3..b167baef88c0b 100644
@@ -1252,6 +1252,12 @@ int __init set_handle_irq(void (*handle_irq)(struct pt_regs *));
  * top-level IRQ handler.
  */
 extern void (*handle_arch_irq)(struct pt_regs *) __ro_after_init;
+#else
+#define set_handle_irq(handle_irq)		\
+	do {					\
+		(void)handle_irq;		\
+		WARN_ON(1);			\
+	} while (0)
 #endif
 
 #endif /* _LINUX_IRQ_H */
Signature · 1 line
2.25.1
author maintainer
#79 lore raw

PATCH 80/132 octeontx2-af: fix LD CUSTOM LTYPE aliasing

In reply to Sasha Levin

From: Stanislaw Kardach <[email protected]>

[ Upstream commit 450f0b978870c384dd81d1176088536555f3170e ]

Since LD contains LTYPE definitions tweaked toward efficient NIX_AF_RX_FLOW_KEY_ALG(0..31)_FIELD(0..4) usage, the original location of NPC_LT_LD_CUSTOM0/1 was aliased with MPLS_IN_* definitions. Moving custom frame to value 6 and 7 removes the aliasing at the cost of custom frames being also considered when TCP/UDP RSS algo is configured.

However since the goal of CUSTOM frames is to classify them to a separate set of RQs, this cost is acceptable.

---
 drivers/net/ethernet/marvell/octeontx2/af/npc.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/net/ethernet/marvell/octeontx2/af/npc.h +2 -2
index 3803af9231c68..c0ff5f70aa431 100644
@@ -77,6 +77,8 @@ enum npc_kpu_ld_ltype {
 	NPC_LT_LD_ICMP,
 	NPC_LT_LD_SCTP,
 	NPC_LT_LD_ICMP6,
+	NPC_LT_LD_CUSTOM0,
+	NPC_LT_LD_CUSTOM1,
 	NPC_LT_LD_IGMP = 8,
 	NPC_LT_LD_ESP,
 	NPC_LT_LD_AH,
@@ -85,8 +87,6 @@ enum npc_kpu_ld_ltype {
 	NPC_LT_LD_NSH,
 	NPC_LT_LD_TU_MPLS_IN_NSH,
 	NPC_LT_LD_TU_MPLS_IN_IP,
-	NPC_LT_LD_CUSTOM0 = 0xE,
-	NPC_LT_LD_CUSTOM1 = 0xF,
 };
 
 enum npc_kpu_le_ltype {
Signature · 1 line
2.25.1
author maintainer
#80 lore raw

PATCH 81/132 dm: change max_io_len() to use blk_max_size_offset()

In reply to Sasha Levin

From: Mike Snitzer <[email protected]>

[ Upstream commit 5091cdec56faeaefa79de4b6cb3c3c55e50d1ac3 ]

Using blk_max_size_offset() enables DM core's splitting to impose ti->max_io_len (via q->limits.chunk_sectors) and also fallback to respecting q->limits.max_sectors if chunk_sectors isn't set.

---
 drivers/md/dm.c | 20 ++++++++------------
 1 file changed, 8 insertions(+), 12 deletions(-)
drivers/md/dm.c +8 -12
index 548ad06094e98..4cfd5c88113cb 100644
@@ -1051,22 +1051,18 @@ static sector_t max_io_len_target_boundary(sector_t sector, struct dm_target *ti
 static sector_t max_io_len(sector_t sector, struct dm_target *ti)
 {
 	sector_t len = max_io_len_target_boundary(sector, ti);
-	sector_t offset, max_len;
+	sector_t max_len;
 
 	/*
 	 * Does the target need to split even further?
+	 * - q->limits.chunk_sectors reflects ti->max_io_len so
+	 *   blk_max_size_offset() provides required splitting.
+	 * - blk_max_size_offset() also respects q->limits.max_sectors
 	 */
-	if (ti->max_io_len) {
-		offset = dm_target_offset(ti, sector);
-		if (unlikely(ti->max_io_len & (ti->max_io_len - 1)))
-			max_len = sector_div(offset, ti->max_io_len);
-		else
-			max_len = offset & (ti->max_io_len - 1);
-		max_len = ti->max_io_len - max_len;
-
-		if (len > max_len)
-			len = max_len;
-	}
+	max_len = blk_max_size_offset(dm_table_get_md(ti->table)->queue,
+				      dm_target_offset(ti, sector));
+	if (len > max_len)
+		len = max_len;
 
 	return len;
 }
Signature · 7 lines
2.25.1


--
dm-devel mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/dm-devel
author maintainer
#81 lore raw

PATCH 82/132 brcmfmac: Fix warning message after dongle setup failed

In reply to Sasha Levin

From: Wright Feng <[email protected]>

[ Upstream commit 6aa5a83a7ed8036c1388a811eb8bdfa77b21f19c ]

Brcmfmac showed warning message in fweh.c when checking the size of event queue which is not initialized. Therefore, we only cancel the worker and reset event handler only when it is initialized.

[  145.505899] brcmfmac 0000:02:00.0: brcmf_pcie_setup: Dongle setup
[  145.929970] ------------[ cut here ]------------
[  145.929994] WARNING: CPU: 0 PID: 288 at drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.c:312
brcmf_fweh_detach+0xbc/0xd0 [brcmfmac]
...
[  145.930029] Call Trace:
[  145.930036]  brcmf_detach+0x77/0x100 [brcmfmac]
[  145.930043]  brcmf_pcie_remove+0x79/0x130 [brcmfmac]
[  145.930046]  pci_device_remove+0x39/0xc0
[  145.930048]  device_release_driver_internal+0x141/0x200
[  145.930049]  device_release_driver+0x12/0x20
[  145.930054]  brcmf_pcie_setup+0x101/0x3c0 [brcmfmac]
[  145.930060]  brcmf_fw_request_done+0x11d/0x1f0 [brcmfmac]
[  145.930062]  ? lock_timer_base+0x7d/0xa0
[  145.930063]  ? internal_add_timer+0x1f/0xa0
[  145.930064]  ? add_timer+0x11a/0x1d0
[  145.930066]  ? __kmalloc_track_caller+0x18c/0x230
[  145.930068]  ? kstrdup_const+0x23/0x30
[  145.930069]  ? add_dr+0x46/0x80
[  145.930070]  ? devres_add+0x3f/0x50
[  145.930072]  ? usermodehelper_read_unlock+0x15/0x20
[  145.930073]  ? _request_firmware+0x288/0xa20
[  145.930075]  request_firmware_work_func+0x36/0x60
[  145.930077]  process_one_work+0x144/0x360
[  145.930078]  worker_thread+0x4d/0x3c0
[  145.930079]  kthread+0x112/0x150
[  145.930080]  ? rescuer_thread+0x340/0x340
[  145.930081]  ? kthread_park+0x60/0x60
[  145.930083]  ret_from_fork+0x25/0x30
---
 .../net/wireless/broadcom/brcm80211/brcmfmac/fweh.c    | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)
drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.c +6 -4
index a5cced2c89ac6..921b94c4f5f9a 100644
@@ -304,10 +304,12 @@ void brcmf_fweh_detach(struct brcmf_pub *drvr)
 {
 	struct brcmf_fweh_info *fweh = &drvr->fweh;
 
-	/* cancel the worker */
-	cancel_work_sync(&fweh->event_work);
-	WARN_ON(!list_empty(&fweh->event_q));
-	memset(fweh->evt_handler, 0, sizeof(fweh->evt_handler));
+	/* cancel the worker if initialized */
+	if (fweh->event_work.func) {
+		cancel_work_sync(&fweh->event_work);
+		WARN_ON(!list_empty(&fweh->event_q));
+		memset(fweh->evt_handler, 0, sizeof(fweh->evt_handler));
+	}
 }
 
 /**
Signature · 1 line
2.25.1
author maintainer
#82 lore raw

PATCH 83/132 ath11k: Use GFP_ATOMIC instead of GFP_KERNEL in ath11k_dp_htt_get_ppdu_desc

In reply to Sasha Levin

From: Wen Gong <[email protected]>

[ Upstream commit 6a8be1baa9116a038cb4f6158cc10134387ca0d0 ]

With SLUB DEBUG CONFIG below crash is seen as kmem_cache_alloc is being called in non-atomic context.

To fix this issue, use GFP_ATOMIC instead of GFP_KERNEL kzalloc.

[  357.217088] BUG: sleeping function called from invalid context at mm/slab.h:498
[  357.217091] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 0, name: swapper/0
[  357.217092] INFO: lockdep is turned off.
[  357.217095] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W         5.9.0-rc5-wt-ath+ #196
[  357.217096] Hardware name: Intel(R) Client Systems NUC8i7HVK/NUC8i7HVB, BIOS HNKBLi70.86A.0049.2018.0801.1601 08/01/2018
[  357.217097] Call Trace:
[  357.217098]  <IRQ>
[  357.217107]  ? ath11k_dp_htt_get_ppdu_desc+0xa9/0x170 [ath11k]
[  357.217110]  dump_stack+0x77/0xa0
[  357.217113]  ___might_sleep.cold+0xa6/0xb6
[  357.217116]  kmem_cache_alloc_trace+0x1f2/0x270
[  357.217122]  ath11k_dp_htt_get_ppdu_desc+0xa9/0x170 [ath11k]
[  357.217129]  ath11k_htt_pull_ppdu_stats.isra.0+0x96/0x270 [ath11k]
[  357.217135]  ath11k_dp_htt_htc_t2h_msg_handler+0xe7/0x1d0 [ath11k]
[  357.217137]  ? trace_hardirqs_on+0x1c/0x100
[  357.217143]  ath11k_htc_rx_completion_handler+0x207/0x370 [ath11k]
[  357.217149]  ath11k_ce_recv_process_cb+0x15e/0x1e0 [ath11k]
[  357.217151]  ? handle_irq_event+0x70/0xa8
[  357.217154]  ath11k_pci_ce_tasklet+0x10/0x30 [ath11k_pci]
[  357.217157]  tasklet_action_common.constprop.0+0xd4/0xf0
[  357.217160]  __do_softirq+0xc9/0x482
[  357.217162]  asm_call_on_stack+0x12/0x20
[  357.217163]  </IRQ>
[  357.217166]  do_softirq_own_stack+0x49/0x60
[  357.217167]  irq_exit_rcu+0x9a/0xd0
[  357.217169]  common_interrupt+0xa1/0x190
[  357.217171]  asm_common_interrupt+0x1e/0x40
[  357.217173] RIP: 0010:cpu_idle_poll.isra.0+0x2e/0x60
[  357.217175] Code: 8b 35 26 27 74 69 e8 11 c8 3d ff e8 bc fa 42 ff e8 e7 9f 4a ff fb 65 48 8b 1c 25 80 90 01 00 48 8b 03 a8 08 74 0b eb 1c f3 90 <48> 8b 03 a8 08 75 13 8b 0
[  357.217177] RSP: 0018:ffffffff97403ee0 EFLAGS: 00000202
[  357.217178] RAX: 0000000000000001 RBX: ffffffff9742b8c0 RCX: 0000000000b890ca
[  357.217180] RDX: 0000000000b890ca RSI: 0000000000000001 RDI: ffffffff968d0c49
[  357.217181] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000001
[  357.217182] R10: ffffffff9742b8c0 R11: 0000000000000046 R12: 0000000000000000
[  357.217183] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000066fdf520
[  357.217186]  ? cpu_idle_poll.isra.0+0x19/0x60
[  357.217189]  do_idle+0x5f/0xe0
[  357.217191]  cpu_startup_entry+0x14/0x20
[  357.217193]  start_kernel+0x443/0x464
[  357.217196]  secondary_startup_64+0xa4/0xb0

Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1

---
 drivers/net/wireless/ath/ath11k/dp_rx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/wireless/ath/ath11k/dp_rx.c +1 -1
index a54610d75c40a..69cc40cad12fb 100644
@@ -1423,7 +1423,7 @@ struct htt_ppdu_stats_info *ath11k_dp_htt_get_ppdu_desc(struct ath11k *ar,
 	}
 	spin_unlock_bh(&ar->data_lock);
 
-	ppdu_info = kzalloc(sizeof(*ppdu_info), GFP_KERNEL);
+	ppdu_info = kzalloc(sizeof(*ppdu_info), GFP_ATOMIC);
 	if (!ppdu_info)
 		return NULL;
 
Signature · 7 lines
2.25.1


-- 
ath11k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath11k
author maintainer
#83 lore raw

PATCH 84/132 ath11k: fix warning caused by lockdep_assert_held

In reply to Sasha Levin

From: Carl Huang <[email protected]>

[ Upstream commit 2f588660e34a982377109872757f1b99d7748d21 ]

Fix warning caused by lockdep_assert_held when CONFIG_LOCKDEP is enabled.

[  271.940647] WARNING: CPU: 6 PID: 0 at drivers/net/wireless/ath/ath11k/hal.c:818 ath11k_hal_srng_access_begin+0x31/0x40 [ath11k]
[  271.940655] Modules linked in: qrtr_mhi qrtr ns ath11k_pci mhi ath11k qmi_helpers nvme nvme_core
[  271.940675] CPU: 6 PID: 0 Comm: swapper/6 Kdump: loaded Tainted: G        W         5.9.0-rc5-kalle-bringup-wt-ath+ #4
[  271.940682] Hardware name: Dell Inc. Inspiron 7590/08717F, BIOS 1.3.0 07/22/2019
[  271.940698] RIP: 0010:ath11k_hal_srng_access_begin+0x31/0x40 [ath11k]
[  271.940708] Code: 48 89 f3 85 c0 75 11 48 8b 83 a8 00 00 00 8b 00 89 83 b0 00 00 00 5b c3 48 8d 7e 58 be ff ff ff ff e8 53 24 ec fa 85 c0 75 dd <0f> 0b eb d9 90 66 2e 0f 1f 84 00 00 00 00 00 55 53 48 89 f3 8b 35
[  271.940718] RSP: 0018:ffffbdf0c0230df8 EFLAGS: 00010246
[  271.940727] RAX: 0000000000000000 RBX: ffffa12b34e67680 RCX: ffffa12b57a0d800
[  271.940735] RDX: 0000000000000000 RSI: 00000000ffffffff RDI: ffffa12b34e676d8
[  271.940742] RBP: ffffa12b34e60000 R08: 0000000000000001 R09: 0000000000000001
[  271.940753] R10: 0000000000000001 R11: 0000000000000046 R12: 0000000000000000
[  271.940763] R13: ffffa12b34e60000 R14: ffffa12b34e60000 R15: 0000000000000000
[  271.940774] FS:  0000000000000000(0000) GS:ffffa12b5a400000(0000) knlGS:0000000000000000
[  271.940788] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  271.940798] CR2: 00007f8bef282008 CR3: 00000001f4224004 CR4: 00000000003706e0
[  271.940805] Call Trace:
[  271.940813]  <IRQ>
[  271.940835]  ath11k_dp_tx_completion_handler+0x9e/0x950 [ath11k]
[  271.940847]  ? lock_acquire+0xba/0x3b0
[  271.940876]  ath11k_dp_service_srng+0x5a/0x2e0 [ath11k]
[  271.940893]  ath11k_pci_ext_grp_napi_poll+0x1e/0x80 [ath11k_pci]
[  271.940908]  net_rx_action+0x283/0x4f0
[  271.940931]  __do_softirq+0xcb/0x499
[  271.940950]  asm_call_on_stack+0x12/0x20
[  271.940963]  </IRQ>
[  271.940979]  do_softirq_own_stack+0x4d/0x60
[  271.940991]  irq_exit_rcu+0xb0/0xc0
[  271.941001]  common_interrupt+0xce/0x190
[  271.941014]  asm_common_interrupt+0x1e/0x40
[  271.941026] RIP: 0010:cpuidle_enter_state+0x115/0x500

Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1

---
 drivers/net/wireless/ath/ath11k/dp_tx.c | 4 ++++
 1 file changed, 4 insertions(+)
drivers/net/wireless/ath/ath11k/dp_tx.c +4 -0
index 41c990aec6b7d..7264bbdf76750 100644
@@ -509,6 +509,8 @@ void ath11k_dp_tx_completion_handler(struct ath11k_base *ab, int ring_id)
 	u32 msdu_id;
 	u8 mac_id;
 
+	spin_lock_bh(&status_ring->lock);
+
 	ath11k_hal_srng_access_begin(ab, status_ring);
 
 	while ((ATH11K_TX_COMPL_NEXT(tx_ring->tx_status_head) !=
@@ -528,6 +530,8 @@ void ath11k_dp_tx_completion_handler(struct ath11k_base *ab, int ring_id)
 
 	ath11k_hal_srng_access_end(ab, status_ring);
 
+	spin_unlock_bh(&status_ring->lock);
+
 	while (ATH11K_TX_COMPL_NEXT(tx_ring->tx_status_tail) != tx_ring->tx_status_head) {
 		struct hal_wbm_release_ring *tx_status;
 		u32 desc_id;
Signature · 1 line
2.25.1
author maintainer
#84 lore raw

PATCH 85/132 ath11k: change to disable softirqs for ath11k_regd_update to solve deadlock

In reply to Sasha Levin

From: Wen Gong <[email protected]>

[ Upstream commit df648808c6b9989555e247530d8ca0ad0094b361 ]

After base_lock which occupy by ath11k_regd_update, the softirq run for WMI_REG_CHAN_LIST_CC_EVENTID maybe arrived and it also need to accuire the spin lock, then deadlock happend, change to disable softirqis to solve it.

[  235.576990] ================================
[  235.576991] WARNING: inconsistent lock state
[  235.576993] 5.9.0-rc5-wt-ath+ #196 Not tainted
[  235.576994] --------------------------------
[  235.576995] inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage.
[  235.576997] kworker/u16:1/98 [HC0[0]:SC0[0]:HE1:SE1] takes:
[  235.576998] ffff9655f75cad98 (&ab->base_lock){+.?.}-{2:2}, at: ath11k_regd_update+0x28/0x1d0 [ath11k]
[  235.577009] {IN-SOFTIRQ-W} state was registered at:
[  235.577013]   __lock_acquire+0x219/0x6e0
[  235.577015]   lock_acquire+0xb6/0x270
[  235.577018]   _raw_spin_lock+0x2c/0x70
[  235.577023]   ath11k_reg_chan_list_event.isra.0+0x10d/0x1e0 [ath11k]
[  235.577028]   ath11k_wmi_tlv_op_rx+0x3c3/0x560 [ath11k]
[  235.577033]   ath11k_htc_rx_completion_handler+0x207/0x370 [ath11k]
[  235.577039]   ath11k_ce_recv_process_cb+0x15e/0x1e0 [ath11k]
[  235.577041]   ath11k_pci_ce_tasklet+0x10/0x30 [ath11k_pci]
[  235.577043]   tasklet_action_common.constprop.0+0xd4/0xf0
[  235.577045]   __do_softirq+0xc9/0x482
[  235.577046]   asm_call_on_stack+0x12/0x20
[  235.577048]   do_softirq_own_stack+0x49/0x60
[  235.577049]   irq_exit_rcu+0x9a/0xd0
[  235.577050]   common_interrupt+0xa1/0x190
[  235.577052]   asm_common_interrupt+0x1e/0x40
[  235.577053]   cpu_idle_poll.isra.0+0x2e/0x60
[  235.577055]   do_idle+0x5f/0xe0
[  235.577056]   cpu_startup_entry+0x14/0x20
[  235.577058]   start_kernel+0x443/0x464
[  235.577060]   secondary_startup_64+0xa4/0xb0
[  235.577061] irq event stamp: 432035
[  235.577063] hardirqs last  enabled at (432035): [<ffffffff968d12b4>] _raw_spin_unlock_irqrestore+0x34/0x40
[  235.577064] hardirqs last disabled at (432034): [<ffffffff968d10d3>] _raw_spin_lock_irqsave+0x63/0x80
[  235.577066] softirqs last  enabled at (431998): [<ffffffff967115c1>] inet6_fill_ifla6_attrs+0x3f1/0x430
[  235.577067] softirqs last disabled at (431996): [<ffffffff9671159f>] inet6_fill_ifla6_attrs+0x3cf/0x430
[  235.577068]
[  235.577068] other info that might help us debug this:
[  235.577069]  Possible unsafe locking scenario:
[  235.577069]
[  235.577070]        CPU0
[  235.577070]        ----
[  235.577071]   lock(&ab->base_lock);
[  235.577072]   <Interrupt>
[  235.577073]     lock(&ab->base_lock);
[  235.577074]
[  235.577074]  *** DEADLOCK ***
[  235.577074]
[  235.577075] 3 locks held by kworker/u16:1/98:
[  235.577076]  #0: ffff9655f75b1d48 ((wq_completion)ath11k_qmi_driver_event){+.+.}-{0:0}, at: process_one_work+0x1d3/0x5d0
[  235.577079]  #1: ffffa33cc02f3e70 ((work_completion)(&ab->qmi.event_work)){+.+.}-{0:0}, at: process_one_work+0x1d3/0x5d0
[  235.577081]  #2: ffff9655f75cad50 (&ab->core_lock){+.+.}-{3:3}, at: ath11k_core_qmi_firmware_ready.part.0+0x4e/0x160 [ath11k]
[  235.577087]
[  235.577087] stack backtrace:
[  235.577088] CPU: 3 PID: 98 Comm: kworker/u16:1 Not tainted 5.9.0-rc5-wt-ath+ #196
[  235.577089] Hardware name: Intel(R) Client Systems NUC8i7HVK/NUC8i7HVB, BIOS HNKBLi70.86A.0049.2018.0801.1601 08/01/2018
[  235.577095] Workqueue: ath11k_qmi_driver_event ath11k_qmi_driver_event_work [ath11k]
[  235.577096] Call Trace:
[  235.577100]  dump_stack+0x77/0xa0
[  235.577102]  mark_lock_irq.cold+0x15/0x3c
[  235.577104]  mark_lock+0x1d7/0x540
[  235.577105]  mark_usage+0xc7/0x140
[  235.577107]  __lock_acquire+0x219/0x6e0
[  235.577108]  ? sched_clock_cpu+0xc/0xb0
[  235.577110]  lock_acquire+0xb6/0x270
[  235.577116]  ? ath11k_regd_update+0x28/0x1d0 [ath11k]
[  235.577118]  ? atomic_notifier_chain_register+0x2d/0x40
[  235.577120]  _raw_spin_lock+0x2c/0x70
[  235.577125]  ? ath11k_regd_update+0x28/0x1d0 [ath11k]
[  235.577130]  ath11k_regd_update+0x28/0x1d0 [ath11k]
[  235.577136]  __ath11k_mac_register+0x3fb/0x480 [ath11k]
[  235.577141]  ath11k_mac_register+0x119/0x180 [ath11k]
[  235.577146]  ath11k_core_pdev_create+0x17/0xe0 [ath11k]
[  235.577150]  ath11k_core_qmi_firmware_ready.part.0+0x65/0x160 [ath11k]
[  235.577155]  ath11k_qmi_driver_event_work+0x1c5/0x230 [ath11k]
[  235.577158]  process_one_work+0x265/0x5d0
[  235.577160]  worker_thread+0x49/0x300
[  235.577161]  ? process_one_work+0x5d0/0x5d0
[  235.577163]  kthread+0x135/0x150
[  235.577164]  ? kthread_create_worker_on_cpu+0x60/0x60
[  235.577166]  ret_from_fork+0x22/0x30

Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1

---
 drivers/net/wireless/ath/ath11k/reg.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/net/wireless/ath/ath11k/reg.c +3 -3
index 453aa9c069691..dc52d701ad08f 100644
@@ -202,7 +202,7 @@ int ath11k_regd_update(struct ath11k *ar, bool init)
 	ab = ar->ab;
 	pdev_id = ar->pdev_idx;
 
-	spin_lock(&ab->base_lock);
+	spin_lock_bh(&ab->base_lock);
 
 	if (init) {
 		/* Apply the regd received during init through
@@ -223,7 +223,7 @@ int ath11k_regd_update(struct ath11k *ar, bool init)
 
 	if (!regd) {
 		ret = -EINVAL;
-		spin_unlock(&ab->base_lock);
+		spin_unlock_bh(&ab->base_lock);
 		goto err;
 	}
 
@@ -234,7 +234,7 @@ int ath11k_regd_update(struct ath11k *ar, bool init)
 	if (regd_copy)
 		ath11k_copy_regd(regd, regd_copy);
 
-	spin_unlock(&ab->base_lock);
+	spin_unlock_bh(&ab->base_lock);
 
 	if (!regd_copy) {
 		ret = -ENOMEM;
Signature · 1 line
2.25.1
author maintainer
#85 lore raw

PATCH 86/132 drivers/net/wan/hdlc_fr: Correctly handle special skb->protocol values

In reply to Sasha Levin

From: Xie He <[email protected]>

[ Upstream commit 8306266c1d51aac9aa7aa907fe99032a58c6382c ]

The fr_hard_header function is used to prepend the header to skbs before transmission. It is used in 3 situations:
1) When a control packet is generated internally in this driver;
2) When a user sends an skb on an Ethernet-emulating PVC device;
3) When a user sends an skb on a normal PVC device.

These 3 situations need to be handled differently by fr_hard_header. Different headers should be prepended to the skb in different situations.

Currently fr_hard_header distinguishes these 3 situations using skb->protocol. For situation 1 and 2, a special skb->protocol value will be assigned before calling fr_hard_header, so that it can recognize these 2 situations. All skb->protocol values other than these special ones are treated by fr_hard_header as situation 3.

However, it is possible that in situation 3, the user sends an skb with one of the special skb->protocol values. In this case, fr_hard_header would incorrectly treat it as situation 1 or 2.

This patch tries to solve this issue by using skb->dev instead of skb->protocol to distinguish between these 3 situations. For situation 1, skb->dev would be NULL; for situation 2, skb->dev->type would be ARPHRD_ETHER; and for situation 3, skb->dev->type would be ARPHRD_DLCI.

This way fr_hard_header would be able to distinguish these 3 situations correctly regardless what skb->protocol value the user tries to use in situation 3.

---
 drivers/net/wan/hdlc_fr.c | 98 ++++++++++++++++++++-------------------
 1 file changed, 51 insertions(+), 47 deletions(-)
drivers/net/wan/hdlc_fr.c +51 -47
index d6cfd51613ed8..3a44dad87602d 100644
@@ -273,63 +273,69 @@ static inline struct net_device **get_dev_p(struct pvc_device *pvc,
 
 static int fr_hard_header(struct sk_buff **skb_p, u16 dlci)
 {
-	u16 head_len;
 	struct sk_buff *skb = *skb_p;
 
-	switch (skb->protocol) {
-	case cpu_to_be16(NLPID_CCITT_ANSI_LMI):
-		head_len = 4;
-		skb_push(skb, head_len);
-		skb->data[3] = NLPID_CCITT_ANSI_LMI;
-		break;
-
-	case cpu_to_be16(NLPID_CISCO_LMI):
-		head_len = 4;
-		skb_push(skb, head_len);
-		skb->data[3] = NLPID_CISCO_LMI;
-		break;
-
-	case cpu_to_be16(ETH_P_IP):
-		head_len = 4;
-		skb_push(skb, head_len);
-		skb->data[3] = NLPID_IP;
-		break;
-
-	case cpu_to_be16(ETH_P_IPV6):
-		head_len = 4;
-		skb_push(skb, head_len);
-		skb->data[3] = NLPID_IPV6;
-		break;
-
-	case cpu_to_be16(ETH_P_802_3):
-		head_len = 10;
-		if (skb_headroom(skb) < head_len) {
-			struct sk_buff *skb2 = skb_realloc_headroom(skb,
-								    head_len);
+	if (!skb->dev) { /* Control packets */
+		switch (dlci) {
+		case LMI_CCITT_ANSI_DLCI:
+			skb_push(skb, 4);
+			skb->data[3] = NLPID_CCITT_ANSI_LMI;
+			break;
+
+		case LMI_CISCO_DLCI:
+			skb_push(skb, 4);
+			skb->data[3] = NLPID_CISCO_LMI;
+			break;
+
+		default:
+			return -EINVAL;
+		}
+
+	} else if (skb->dev->type == ARPHRD_DLCI) {
+		switch (skb->protocol) {
+		case htons(ETH_P_IP):
+			skb_push(skb, 4);
+			skb->data[3] = NLPID_IP;
+			break;
+
+		case htons(ETH_P_IPV6):
+			skb_push(skb, 4);
+			skb->data[3] = NLPID_IPV6;
+			break;
+
+		default:
+			skb_push(skb, 10);
+			skb->data[3] = FR_PAD;
+			skb->data[4] = NLPID_SNAP;
+			/* OUI 00-00-00 indicates an Ethertype follows */
+			skb->data[5] = 0x00;
+			skb->data[6] = 0x00;
+			skb->data[7] = 0x00;
+			/* This should be an Ethertype: */
+			*(__be16 *)(skb->data + 8) = skb->protocol;
+		}
+
+	} else if (skb->dev->type == ARPHRD_ETHER) {
+		if (skb_headroom(skb) < 10) {
+			struct sk_buff *skb2 = skb_realloc_headroom(skb, 10);
 			if (!skb2)
 				return -ENOBUFS;
 			dev_kfree_skb(skb);
 			skb = *skb_p = skb2;
 		}
-		skb_push(skb, head_len);
+		skb_push(skb, 10);
 		skb->data[3] = FR_PAD;
 		skb->data[4] = NLPID_SNAP;
-		skb->data[5] = FR_PAD;
+		/* OUI 00-80-C2 stands for the 802.1 organization */
+		skb->data[5] = 0x00;
 		skb->data[6] = 0x80;
 		skb->data[7] = 0xC2;
+		/* PID 00-07 stands for Ethernet frames without FCS */
 		skb->data[8] = 0x00;
-		skb->data[9] = 0x07; /* bridged Ethernet frame w/out FCS */
-		break;
+		skb->data[9] = 0x07;
 
-	default:
-		head_len = 10;
-		skb_push(skb, head_len);
-		skb->data[3] = FR_PAD;
-		skb->data[4] = NLPID_SNAP;
-		skb->data[5] = FR_PAD;
-		skb->data[6] = FR_PAD;
-		skb->data[7] = FR_PAD;
-		*(__be16*)(skb->data + 8) = skb->protocol;
+	} else {
+		return -EINVAL;
 	}
 
 	dlci_to_q922(skb->data, dlci);
@@ -425,8 +431,8 @@ static netdev_tx_t pvc_xmit(struct sk_buff *skb, struct net_device *dev)
 				skb_put(skb, pad);
 				memset(skb->data + len, 0, pad);
 			}
-			skb->protocol = cpu_to_be16(ETH_P_802_3);
 		}
+		skb->dev = dev;
 		if (!fr_hard_header(&skb, pvc->dlci)) {
 			dev->stats.tx_bytes += skb->len;
 			dev->stats.tx_packets++;
@@ -494,10 +500,8 @@ static void fr_lmi_send(struct net_device *dev, int fullrep)
 	memset(skb->data, 0, len);
 	skb_reserve(skb, 4);
 	if (lmi == LMI_CISCO) {
-		skb->protocol = cpu_to_be16(NLPID_CISCO_LMI);
 		fr_hard_header(&skb, LMI_CISCO_DLCI);
 	} else {
-		skb->protocol = cpu_to_be16(NLPID_CCITT_ANSI_LMI);
 		fr_hard_header(&skb, LMI_CCITT_ANSI_DLCI);
 	}
 	data = skb_tail_pointer(skb);
Signature · 1 line
2.25.1
author maintainer
#86 lore raw

PATCH 87/132 usb: dwc3: core: do not queue work if dr_mode is not USB_DR_MODE_OTG

In reply to Sasha Levin

From: Li Jun <[email protected]>

[ Upstream commit dc336b19e82d0454ea60270cd18fbb4749e162f6 ]

Do not try to queue a drd work if dr_mode is not USB_DR_MODE_OTG because the work is not inited, this may be triggered by user try to change mode file of debugfs on a single role port, which will cause below kernel dump:

[   60.115529] ------------[ cut here ]------------
[   60.120166] WARNING: CPU: 1 PID: 627 at kernel/workqueue.c:1473
__queue_work+0x46c/0x520
[   60.128254] Modules linked in:
[   60.131313] CPU: 1 PID: 627 Comm: sh Not tainted
5.7.0-rc4-00022-g914a586-dirty #135
[   60.139054] Hardware name: NXP i.MX8MQ EVK (DT)
[   60.143585] pstate: a0000085 (NzCv daIf -PAN -UAO)
[   60.148376] pc : __queue_work+0x46c/0x520
[   60.152385] lr : __queue_work+0x314/0x520
[   60.156393] sp : ffff8000124ebc40
[   60.159705] x29: ffff8000124ebc40 x28: ffff800011808018
[   60.165018] x27: ffff800011819ef8 x26: ffff800011d39980
[   60.170331] x25: ffff800011808018 x24: 0000000000000100
[   60.175643] x23: 0000000000000013 x22: 0000000000000001
[   60.180955] x21: ffff0000b7c08e00 x20: ffff0000b6c31080
[   60.186267] x19: ffff0000bb99bc00 x18: 0000000000000000
[   60.191579] x17: 0000000000000000 x16: 0000000000000000
[   60.196891] x15: 0000000000000000 x14: 0000000000000000
[   60.202202] x13: 0000000000000000 x12: 0000000000000000
[   60.207515] x11: 0000000000000000 x10: 0000000000000040
[   60.212827] x9 : ffff800011d55460 x8 : ffff800011d55458
[   60.218138] x7 : ffff0000b7800028 x6 : 0000000000000000
[   60.223450] x5 : ffff0000b7800000 x4 : 0000000000000000
[   60.228762] x3 : ffff0000bb997cc0 x2 : 0000000000000001
[   60.234074] x1 : 0000000000000000 x0 : ffff0000b6c31088
[   60.239386] Call trace:
[   60.241834]  __queue_work+0x46c/0x520
[   60.245496]  queue_work_on+0x6c/0x90
[   60.249075]  dwc3_set_mode+0x48/0x58
[   60.252651]  dwc3_mode_write+0xf8/0x150
[   60.256489]  full_proxy_write+0x5c/0xa8
[   60.260327]  __vfs_write+0x18/0x40
[   60.263729]  vfs_write+0xdc/0x1c8
[   60.267045]  ksys_write+0x68/0xf0
[   60.270360]  __arm64_sys_write+0x18/0x20
[   60.274286]  el0_svc_common.constprop.0+0x68/0x160
[   60.279077]  do_el0_svc+0x20/0x80
[   60.282394]  el0_sync_handler+0x10c/0x178
[   60.286403]  el0_sync+0x140/0x180
[   60.289716] ---[ end trace 70b155582e2b7988 ]---
---
 drivers/usb/dwc3/core.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/usb/dwc3/core.c +3 -3
index 25c686a752b0f..020e87a571381 100644
@@ -120,9 +120,6 @@ static void __dwc3_set_mode(struct work_struct *work)
 	unsigned long flags;
 	int ret;
 
-	if (dwc->dr_mode != USB_DR_MODE_OTG)
-		return;
-
 	pm_runtime_get_sync(dwc->dev);
 
 	if (dwc->current_dr_role == DWC3_GCTL_PRTCAP_OTG)
@@ -203,6 +200,9 @@ void dwc3_set_mode(struct dwc3 *dwc, u32 mode)
 {
 	unsigned long flags;
 
+	if (dwc->dr_mode != USB_DR_MODE_OTG)
+		return;
+
 	spin_lock_irqsave(&dwc->lock, flags);
 	dwc->desired_dr_role = mode;
 	spin_unlock_irqrestore(&dwc->lock, flags);
Signature · 1 line
2.25.1
author maintainer
#87 lore raw

PATCH 88/132 bus: mhi: core: Abort suspends due to outgoing pending packets

In reply to Sasha Levin

From: Bhaumik Bhatt <[email protected]>

[ Upstream commit 515847c557dd33167be86cb429fc0674a331bc88 ]

Add the missing check to abort suspends if a client driver has pending outgoing packets to send to the device. This allows better utilization of the MHI bus wherein clients on the host are not left waiting for longer suspend or resume cycles to finish for data transfers.

---
 drivers/bus/mhi/core/pm.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
drivers/bus/mhi/core/pm.c +4 -2
index 7960980780832..661d704c8093d 100644
@@ -686,7 +686,8 @@ int mhi_pm_suspend(struct mhi_controller *mhi_cntrl)
 		return -EIO;
 
 	/* Return busy if there are any pending resources */
-	if (atomic_read(&mhi_cntrl->dev_wake))
+	if (atomic_read(&mhi_cntrl->dev_wake) ||
+	    atomic_read(&mhi_cntrl->pending_pkts))
 		return -EBUSY;
 
 	/* Take MHI out of M2 state */
@@ -712,7 +713,8 @@ int mhi_pm_suspend(struct mhi_controller *mhi_cntrl)
 
 	write_lock_irq(&mhi_cntrl->pm_lock);
 
-	if (atomic_read(&mhi_cntrl->dev_wake)) {
+	if (atomic_read(&mhi_cntrl->dev_wake) ||
+	    atomic_read(&mhi_cntrl->pending_pkts)) {
 		write_unlock_irq(&mhi_cntrl->pm_lock);
 		return -EBUSY;
 	}
Signature · 1 line
2.25.1
author maintainer
#88 lore raw

PATCH 89/132 bus/fsl_mc: Do not rely on caller to provide non NULL mc_io

In reply to Sasha Levin

From: Diana Craciun <[email protected]>

[ Upstream commit 5026cf605143e764e1785bbf9158559d17f8d260 ]

Before destroying the mc_io, check first that it was allocated.

---
 drivers/bus/fsl-mc/mc-io.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)
drivers/bus/fsl-mc/mc-io.c +6 -1
index 6ae48ad804091..e1dfe4a765198 100644
@@ -129,7 +129,12 @@ int __must_check fsl_create_mc_io(struct device *dev,
  */
 void fsl_destroy_mc_io(struct fsl_mc_io *mc_io)
 {
-	struct fsl_mc_device *dpmcp_dev = mc_io->dpmcp_dev;
+	struct fsl_mc_device *dpmcp_dev;
+
+	if (!mc_io)
+		return;
+
+	dpmcp_dev = mc_io->dpmcp_dev;
 
 	if (dpmcp_dev)
 		fsl_mc_io_unset_dpmcp(mc_io);
Signature · 1 line
2.25.1
author maintainer
#89 lore raw

PATCH 90/132 ACPI: HMAT: Fix handling of changes from ACPI 6.2 to ACPI 6.3

In reply to Sasha Levin

From: Jonathan Cameron <[email protected]>

[ Upstream commit 2c5b9bde95c96942f2873cea6ef383c02800e4a8 ]

In ACPI 6.3, the Memory Proximity Domain Attributes Structure changed substantially. One of those changes was that the flag for "Memory Proximity Domain field is valid" was deprecated.

This was because the field "Proximity Domain for the Memory" became a required field and hence having a validity flag makes no sense.

So the correct logic is to always assume the field is there. Current code assumes it never is.

---
 drivers/acpi/numa/hmat.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/acpi/numa/hmat.c +2 -1
index 2c32cfb723701..6a91a55229aee 100644
@@ -424,7 +424,8 @@ static int __init hmat_parse_proximity_domain(union acpi_subtable_headers *heade
 		pr_info("HMAT: Memory Flags:%04x Processor Domain:%u Memory Domain:%u\n",
 			p->flags, p->processor_PD, p->memory_PD);
 
-	if (p->flags & ACPI_HMAT_MEMORY_PD_VALID && hmat_revision == 1) {
+	if ((hmat_revision == 1 && p->flags & ACPI_HMAT_MEMORY_PD_VALID) ||
+	    hmat_revision > 1) {
 		target = find_mem_target(p->memory_PD);
 		if (!target) {
 			pr_debug("HMAT: Memory Domain missing from SRAT\n");
Signature · 1 line
2.25.1
author maintainer
#90 lore raw

PATCH 91/132 power: supply: test_power: add missing newlines when printing parameters by sysfs

In reply to Sasha Levin

From: Xiongfeng Wang <[email protected]>

[ Upstream commit c07fa6c1631333f02750cf59f22b615d768b4d8f ]

When I cat some module parameters by sysfs, it displays as follows. It's better to add a newline for easy reading.

root@syzkaller:~# cd /sys/module/test_power/parameters/
root@syzkaller:/sys/module/test_power/parameters# cat ac_online
onroot@syzkaller:/sys/module/test_power/parameters# cat battery_present
trueroot@syzkaller:/sys/module/test_power/parameters# cat battery_health
goodroot@syzkaller:/sys/module/test_power/parameters# cat battery_status
dischargingroot@syzkaller:/sys/module/test_power/parameters# cat battery_technology
LIONroot@syzkaller:/sys/module/test_power/parameters# cat usb_online
onroot@syzkaller:/sys/module/test_power/parameters#
---
 drivers/power/supply/test_power.c | 6 ++++++
 1 file changed, 6 insertions(+)
drivers/power/supply/test_power.c +6 -0
index b3c05ff05783f..1bdce430246af 100644
@@ -353,6 +353,7 @@ static int param_set_ac_online(const char *key, const struct kernel_param *kp)
 static int param_get_ac_online(char *buffer, const struct kernel_param *kp)
 {
 	strcpy(buffer, map_get_key(map_ac_online, ac_online, "unknown"));
+	strcat(buffer, "\n");
 	return strlen(buffer);
 }
 
@@ -366,6 +367,7 @@ static int param_set_usb_online(const char *key, const struct kernel_param *kp)
 static int param_get_usb_online(char *buffer, const struct kernel_param *kp)
 {
 	strcpy(buffer, map_get_key(map_ac_online, usb_online, "unknown"));
+	strcat(buffer, "\n");
 	return strlen(buffer);
 }
 
@@ -380,6 +382,7 @@ static int param_set_battery_status(const char *key,
 static int param_get_battery_status(char *buffer, const struct kernel_param *kp)
 {
 	strcpy(buffer, map_get_key(map_status, battery_status, "unknown"));
+	strcat(buffer, "\n");
 	return strlen(buffer);
 }
 
@@ -394,6 +397,7 @@ static int param_set_battery_health(const char *key,
 static int param_get_battery_health(char *buffer, const struct kernel_param *kp)
 {
 	strcpy(buffer, map_get_key(map_health, battery_health, "unknown"));
+	strcat(buffer, "\n");
 	return strlen(buffer);
 }
 
@@ -409,6 +413,7 @@ static int param_get_battery_present(char *buffer,
 					const struct kernel_param *kp)
 {
 	strcpy(buffer, map_get_key(map_present, battery_present, "unknown"));
+	strcat(buffer, "\n");
 	return strlen(buffer);
 }
 
@@ -426,6 +431,7 @@ static int param_get_battery_technology(char *buffer,
 {
 	strcpy(buffer,
 		map_get_key(map_technology, battery_technology, "unknown"));
+	strcat(buffer, "\n");
 	return strlen(buffer);
 }
 
Signature · 1 line
2.25.1
author maintainer
#91 lore raw

PATCH 92/132 drm/amd/display: HDMI remote sink need mode validation for Linux

In reply to Sasha Levin

From: Fangzhi Zuo <[email protected]>

[ Upstream commit 95d620adb48f7728e67d82f56f756e8d451cf8d2 ]

[Why]
Currently mode validation is bypassed if remote sink exists. That leads to mode set issue when a BW bottle neck exists in the link path, e.g., a DP-to-HDMI converter that only supports HDMI 1.4.

Any invalid mode passed to Linux user space will cause the modeset failure due to limitation of Linux user space implementation.

[How]
Mode validation is skipped only if in edid override. For real remote sink, clock limit check should be done for HDMI remote sink.

Have HDMI related remote sink going through mode validation to elimiate modes which pixel clock exceeds BW limitation.

---
 drivers/gpu/drm/amd/display/dc/core/dc_link.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/amd/display/dc/core/dc_link.c +1 -1
index 885beb0bcc199..eeb4d01048f32 100644
@@ -2439,7 +2439,7 @@ enum dc_status dc_link_validate_mode_timing(
 	/* A hack to avoid failing any modes for EDID override feature on
 	 * topology change such as lower quality cable for DP or different dongle
 	 */
-	if (link->remote_sinks[0])
+	if (link->remote_sinks[0] && link->remote_sinks[0]->sink_signal == SIGNAL_TYPE_VIRTUAL)
 		return DC_OK;
 
 	/* Passive Dongle */
Signature · 6 lines
2.25.1

_______________________________________________
amd-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
author maintainer
#92 lore raw

PATCH 93/132 drm/amd/display: Avoid set zero in the requested clk

In reply to Sasha Levin

From: Rodrigo Siqueira <[email protected]>

[ Upstream commit 2f8be0e516803cc3fd87c1671247896571a5a8fb ]

[Why]
Sometimes CRTCs can be disabled due to display unplugging or temporarily transition in the userspace; in these circumstances, DCE tries to set the minimum clock threshold. When we have this situation, the function bw_calcs is invoked with number_of_displays set to zero, making DCE set dispclk_khz and sclk_khz to zero. For these reasons, we have seen some ATOM bios errors that look like:

[drm:atom_op_jump [amdgpu]] *ERROR* atombios stuck in loop for more than 5secs aborting
[drm:amdgpu_atom_execute_table_locked [amdgpu]] *ERROR* atombios stuck executing EA8A (len 761, WS 0, PS 0) @ 0xEABA

[How]
This error happens due to an attempt to optimize the bandwidth using the sclk, and the dispclk clock set to zero. Technically we handle this in the function dce112_set_clock, but we are not considering the case that this value is set to zero. This commit fixes this issue by ensuring that we never set a minimum value below the minimum clock threshold.

---
 drivers/gpu/drm/amd/display/dc/clk_mgr/dce112/dce112_clk_mgr.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
drivers/gpu/drm/amd/display/dc/clk_mgr/dce112/dce112_clk_mgr.c +1 -2
index d031bd3d30724..807dca8f7d7aa 100644
@@ -79,8 +79,7 @@ int dce112_set_clock(struct clk_mgr *clk_mgr_base, int requested_clk_khz)
 	memset(&dce_clk_params, 0, sizeof(dce_clk_params));
 
 	/* Make sure requested clock isn't lower than minimum threshold*/
-	if (requested_clk_khz > 0)
-		requested_clk_khz = max(requested_clk_khz,
+	requested_clk_khz = max(requested_clk_khz,
 				clk_mgr_dce->base.dentist_vco_freq_khz / 62);
 
 	dce_clk_params.target_clock_frequency = requested_clk_khz;
Signature · 6 lines
2.25.1

_______________________________________________
amd-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
author maintainer
#93 lore raw

PATCH 94/132 ARC: [dts] fix the errors detected by dtbs_check

In reply to Sasha Levin

From: Zhen Lei <[email protected]>

[ Upstream commit 05b1be68c4d6d76970025e6139bfd735c2256ee5 ]

xxx/arc/boot/dts/axs101.dt.yaml: dw-apb-ictl@e0012000: $nodename:0: \
'dw-apb-ictl@e0012000' does not match '^interrupt-controller(@[0-9a-f,]+)*$'
From schema: xxx/interrupt-controller/snps,dw-apb-ictl.yaml

The node name of the interrupt controller must start with "interrupt-controller" instead of "dw-apb-ictl".

---
 arch/arc/boot/dts/axc001.dtsi         | 2 +-
 arch/arc/boot/dts/axc003.dtsi         | 2 +-
 arch/arc/boot/dts/axc003_idu.dtsi     | 2 +-
 arch/arc/boot/dts/vdk_axc003.dtsi     | 2 +-
 arch/arc/boot/dts/vdk_axc003_idu.dtsi | 2 +-
 5 files changed, 5 insertions(+), 5 deletions(-)
arch/arc/boot/dts/axc001.dtsi +1 -1
index 79ec27c043c1d..2a151607b0805 100644
@@ -91,7 +91,7 @@ arcpct0: pct {
 	 * avoid duplicating the MB dtsi file given that IRQ from
 	 * this intc to cpu intc are different for axs101 and axs103
 	 */
-	mb_intc: dw-apb-ictl@e0012000 {
+	mb_intc: interrupt-controller@e0012000 {
 		#interrupt-cells = <1>;
 		compatible = "snps,dw-apb-ictl";
 		reg = < 0x0 0xe0012000 0x0 0x200 >;
arch/arc/boot/dts/axc003.dtsi +1 -1
index ac8e1b463a709..cd1edcf4f95ef 100644
@@ -129,7 +129,7 @@ mmc@15000 {
 	 * avoid duplicating the MB dtsi file given that IRQ from
 	 * this intc to cpu intc are different for axs101 and axs103
 	 */
-	mb_intc: dw-apb-ictl@e0012000 {
+	mb_intc: interrupt-controller@e0012000 {
 		#interrupt-cells = <1>;
 		compatible = "snps,dw-apb-ictl";
 		reg = < 0x0 0xe0012000 0x0 0x200 >;
arch/arc/boot/dts/axc003_idu.dtsi +1 -1
index 9da21e7fd246f..70779386ca796 100644
@@ -135,7 +135,7 @@ mmc@15000 {
 	 * avoid duplicating the MB dtsi file given that IRQ from
 	 * this intc to cpu intc are different for axs101 and axs103
 	 */
-	mb_intc: dw-apb-ictl@e0012000 {
+	mb_intc: interrupt-controller@e0012000 {
 		#interrupt-cells = <1>;
 		compatible = "snps,dw-apb-ictl";
 		reg = < 0x0 0xe0012000 0x0 0x200 >;
arch/arc/boot/dts/vdk_axc003.dtsi +1 -1
index f8be7ba8dad49..c21d0eb07bf67 100644
@@ -46,7 +46,7 @@ debug_uart: dw-apb-uart@5000 {
 
 	};
 
-	mb_intc: dw-apb-ictl@e0012000 {
+	mb_intc: interrupt-controller@e0012000 {
 		#interrupt-cells = <1>;
 		compatible = "snps,dw-apb-ictl";
 		reg = < 0xe0012000 0x200 >;
arch/arc/boot/dts/vdk_axc003_idu.dtsi +1 -1
index 0afa3e53a4e39..4d348853ac7c5 100644
@@ -54,7 +54,7 @@ debug_uart: dw-apb-uart@5000 {
 
 	};
 
-	mb_intc: dw-apb-ictl@e0012000 {
+	mb_intc: interrupt-controller@e0012000 {
 		#interrupt-cells = <1>;
 		compatible = "snps,dw-apb-ictl";
 		reg = < 0xe0012000 0x200 >;
Signature · 1 line
2.25.1
author maintainer
#94 lore raw

PATCH 95/132 block: Consider only dispatched requests for inflight statistic

In reply to Sasha Levin

From: Gabriel Krisman Bertazi <[email protected]>

[ Upstream commit a926c7afffcc0f2e35e6acbccb16921bacf34617 ]

According to Documentation/block/stat.rst, inflight should not include I/O requests that are in the queue but not yet dispatched to the device, but blk-mq identifies as inflight any request that has a tag allocated, which, for queues without elevator, happens at request allocation time and before it is queued in the ctx (default case in blk_mq_submit_bio).

In addition, current behavior is different for queues with elevator from queues without it, since for the former the driver tag is allocated at dispatch time. A more precise approach would be to only consider requests with state MQ_RQ_IN_FLIGHT.

This effectively reverts commit 6131837b1de6 ("blk-mq: count allocated but not started requests in iostats inflight") to consolidate blk-mq behavior with itself (elevator case) and with original documentation, but it differs from the behavior used by the legacy path.

This version differs from v1 by using blk_mq_rq_state to access the state attribute. Avoid using blk_mq_request_started, which was suggested, since we don't want to include MQ_RQ_COMPLETE.

---
 block/blk-mq.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
block/blk-mq.c +1 -1
index 8e623e0282757..88b0dc0034cff 100644
@@ -103,7 +103,7 @@ static bool blk_mq_check_inflight(struct blk_mq_hw_ctx *hctx,
 {
 	struct mq_inflight *mi = priv;
 
-	if (rq->part == mi->part)
+	if (rq->part == mi->part && blk_mq_rq_state(rq) == MQ_RQ_IN_FLIGHT)
 		mi->inflight[rq_data_dir(rq)]++;
 
 	return true;
Signature · 1 line
2.25.1
author maintainer
#95 lore raw

PATCH 96/132 btrfs: fix replace of seed device

In reply to Sasha Levin

From: Anand Jain <[email protected]>

[ Upstream commit c6a5d954950c5031444173ad2195efc163afcac9 ]

If you replace a seed device in a sprouted fs, it appears to have successfully replaced the seed device, but if you look closely, it didn't. Here is an example.

  $ mkfs.btrfs /dev/sda
  $ btrfstune -S1 /dev/sda
  $ mount /dev/sda /btrfs
  $ btrfs device add /dev/sdb /btrfs
  $ umount /btrfs
  $ btrfs device scan --forget
  $ mount -o device=/dev/sda /dev/sdb /btrfs
  $ btrfs replace start -f /dev/sda /dev/sdc /btrfs
  $ echo $?
  0

BTRFS info (device sdb): dev_replace from /dev/sda (devid 1) to /dev/sdc started BTRFS info (device sdb): dev_replace from /dev/sda (devid 1) to /dev/sdc finished

  $ btrfs fi show
  Label: none  uuid: ab2c88b7-be81-4a7e-9849-c3666e7f9f4f
	  Total devices 2 FS bytes used 256.00KiB
	  devid    1 size 3.00GiB used 520.00MiB path /dev/sdc
	  devid    2 size 3.00GiB used 896.00MiB path /dev/sdb

Label: none uuid: 10bd3202-0415-43af-96a8-d5409f310a7e
Total devices 1 FS bytes used 128.00KiB
devid 1 size 3.00GiB used 536.00MiB path /dev/sda

So as per the replace start command and kernel log replace was successful. Now let's try to clean mount.

  $ umount /btrfs
  $ btrfs device scan --forget
  $ mount -o device=/dev/sdc /dev/sdb /btrfs
  mount: /btrfs: wrong fs type, bad option, bad superblock on /dev/sdb, missing codepage or helper program, or other error.
  [  636.157517] BTRFS error (device sdc): failed to read chunk tree: -2
  [  636.180177] BTRFS error (device sdc): open_ctree failed

That's because per dev items it is still looking for the original seed device.

 $ btrfs inspect-internal dump-tree -d /dev/sdb
	item 0 key (DEV_ITEMS DEV_ITEM 1) itemoff 16185 itemsize 98
		devid 1 total_bytes 3221225472 bytes_used 545259520
		io_align 4096 io_width 4096 sector_size 4096 type 0
		generation 6 start_offset 0 dev_group 0
		seek_speed 0 bandwidth 0
		uuid 59368f50-9af2-4b17-91da-8a783cc418d4  <--- seed uuid
		fsid 10bd3202-0415-43af-96a8-d5409f310a7e  <--- seed fsid
	item 1 key (DEV_ITEMS DEV_ITEM 2) itemoff 16087 itemsize 98
		devid 2 total_bytes 3221225472 bytes_used 939524096
		io_align 4096 io_width 4096 sector_size 4096 type 0
		generation 0 start_offset 0 dev_group 0
		seek_speed 0 bandwidth 0
		uuid 56a0a6bc-4630-4998-8daf-3c3030c4256a  <- sprout uuid
		fsid ab2c88b7-be81-4a7e-9849-c3666e7f9f4f <- sprout fsid

But the replaced target has the following uuid+fsid in its superblock which doesn't match with the expected uuid+fsid in its devitem.

  $ btrfs in dump-super /dev/sdc | egrep '^generation|dev_item.uuid|dev_item.fsid|devid'
  generation	20
  dev_item.uuid	59368f50-9af2-4b17-91da-8a783cc418d4
  dev_item.fsid	ab2c88b7-be81-4a7e-9849-c3666e7f9f4f [match]
  dev_item.devid	1

So if you provide the original seed device the mount shall be successful. Which so long happening in the test case btrfs/163.

  $ btrfs device scan --forget
  $ mount -o device=/dev/sda /dev/sdb /btrfs

Fix in this patch:
If a seed is not sprouted then there is no replacement of it, because of its read-only filesystem with a read-only device. Similarly, in the case of a sprouted filesystem, the seed device is still read only. So, mark it as you can't replace a seed device, you can only add a new device and then delete the seed device. If replace is attempted then returns -EINVAL.

---
 fs/btrfs/dev-replace.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
fs/btrfs/dev-replace.c +1 -1
index e4a1c6afe35dc..0cb36746060da 100644
@@ -230,7 +230,7 @@ static int btrfs_init_dev_replace_tgtdev(struct btrfs_fs_info *fs_info,
 	int ret = 0;
 
 	*device_out = NULL;
-	if (fs_info->fs_devices->seeding) {
+	if (srcdev->fs_devices->seeding) {
 		btrfs_err(fs_info, "the filesystem is a seed filesystem!");
 		return -EINVAL;
 	}
Signature · 1 line
2.25.1
author maintainer
#96 lore raw

PATCH 97/132 md/bitmap: md_bitmap_get_counter returns wrong blocks

In reply to Sasha Levin

From: Zhao Heming <[email protected]>

[ Upstream commit d837f7277f56e70d82b3a4a037d744854e62f387 ]

md_bitmap_get_counter() has code:

```
    if (bitmap->bp[page].hijacked ||
        bitmap->bp[page].map == NULL)
        csize = ((sector_t)1) << (bitmap->chunkshift +
                      PAGE_COUNTER_SHIFT - 1);
```

The minus 1 is wrong, this branch should report 2048 bits of space. With "-1" action, this only report 1024 bit of space.

This bug code returns wrong blocks, but it doesn't inflence bitmap logic:
1. Most callers focus this function return value (the counter of offset), not the parameter blocks.
2. The bug is only triggered when hijacked is true or map is NULL. the hijacked true condition is very rare.
the "map == null" only true when array is creating or resizing.
3. Even the caller gets wrong blocks, current code makes caller just to call md_bitmap_get_counter() one more time.

---
 drivers/md/md-bitmap.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/md/md-bitmap.c +1 -1
index 95a5f3757fa30..32a96559cb366 100644
@@ -1367,7 +1367,7 @@ __acquires(bitmap->lock)
 	if (bitmap->bp[page].hijacked ||
 	    bitmap->bp[page].map == NULL)
 		csize = ((sector_t)1) << (bitmap->chunkshift +
-					  PAGE_COUNTER_SHIFT - 1);
+					  PAGE_COUNTER_SHIFT);
 	else
 		csize = ((sector_t)1) << bitmap->chunkshift;
 	*blocks = csize - (offset & (csize - 1));
Signature · 1 line
2.25.1
author maintainer
#97 lore raw

PATCH 98/132 f2fs: fix to set SBI_NEED_FSCK flag for inconsistent inode

In reply to Sasha Levin

From: Chao Yu <[email protected]>

[ Upstream commit d662fad143c0470ad7f46ea7b02da539f613d7d7 ]

If compressed inode has inconsistent fields on i_compress_algorithm, i_compr_blocks and i_log_cluster_size, we missed to set SBI_NEED_FSCK to notice fsck to repair the inode, fix it.

---
 fs/f2fs/inode.c | 3 +++
 1 file changed, 3 insertions(+)
fs/f2fs/inode.c +3 -0
index 44582a4db513e..657a39c82e57d 100644
@@ -292,6 +292,7 @@ static bool sanity_check_inode(struct inode *inode, struct page *node_page)
 			F2FS_FITS_IN_INODE(ri, fi->i_extra_isize,
 						i_log_cluster_size)) {
 		if (ri->i_compress_algorithm >= COMPRESS_MAX) {
+			set_sbi_flag(sbi, SBI_NEED_FSCK);
 			f2fs_warn(sbi, "%s: inode (ino=%lx) has unsupported "
 				"compress algorithm: %u, run fsck to fix",
 				  __func__, inode->i_ino,
@@ -300,6 +301,7 @@ static bool sanity_check_inode(struct inode *inode, struct page *node_page)
 		}
 		if (le64_to_cpu(ri->i_compr_blocks) >
 				SECTOR_TO_BLOCK(inode->i_blocks)) {
+			set_sbi_flag(sbi, SBI_NEED_FSCK);
 			f2fs_warn(sbi, "%s: inode (ino=%lx) has inconsistent "
 				"i_compr_blocks:%llu, i_blocks:%llu, run fsck to fix",
 				  __func__, inode->i_ino,
@@ -309,6 +311,7 @@ static bool sanity_check_inode(struct inode *inode, struct page *node_page)
 		}
 		if (ri->i_log_cluster_size < MIN_COMPRESS_LOG_SIZE ||
 			ri->i_log_cluster_size > MAX_COMPRESS_LOG_SIZE) {
+			set_sbi_flag(sbi, SBI_NEED_FSCK);
 			f2fs_warn(sbi, "%s: inode (ino=%lx) has unsupported "
 				"log cluster size: %u, run fsck to fix",
 				  __func__, inode->i_ino,
Signature · 8 lines
2.25.1



_______________________________________________
Linux-f2fs-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/linux-f2fs-devel
author maintainer
#98 lore raw

PATCH 99/132 bnxt_en: Log unknown link speed appropriately.

In reply to Sasha Levin

From: Michael Chan <[email protected]>

[ Upstream commit 8eddb3e7ce124dd6375d3664f1aae13873318b0f ]

If the VF virtual link is set to always enabled, the speed may be unknown when the physical link is down. The driver currently logs the link speed as 4294967295 Mbps which is SPEED_UNKNOWN. Modify the link up log message as "speed unknown" which makes more sense.

---
 drivers/net/ethernet/broadcom/bnxt/bnxt.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)
drivers/net/ethernet/broadcom/bnxt/bnxt.c +5 -1
index dd07db656a5c3..a7577642ab207 100644
@@ -8428,6 +8428,11 @@ static void bnxt_report_link(struct bnxt *bp)
 		u16 fec;
 
 		netif_carrier_on(bp->dev);
+		speed = bnxt_fw_to_ethtool_speed(bp->link_info.link_speed);
+		if (speed == SPEED_UNKNOWN) {
+			netdev_info(bp->dev, "NIC Link is Up, speed unknown\n");
+			return;
+		}
 		if (bp->link_info.duplex == BNXT_LINK_DUPLEX_FULL)
 			duplex = "full";
 		else
@@ -8440,7 +8445,6 @@ static void bnxt_report_link(struct bnxt *bp)
 			flow_ctrl = "ON - receive";
 		else
 			flow_ctrl = "none";
-		speed = bnxt_fw_to_ethtool_speed(bp->link_info.link_speed);
 		netdev_info(bp->dev, "NIC Link is Up, %u Mbps %s duplex, Flow control: %s\n",
 			    speed, duplex, flow_ctrl);
 		if (bp->flags & BNXT_FLAG_EEE_CAP)
Signature · 1 line
2.25.1
author maintainer
#99 lore raw

PATCH 100/132 binfmt_elf: take the mmap lock around find_extend_vma()

In reply to Sasha Levin

From: Jann Horn <[email protected]>

[ Upstream commit b2767d97f5ff758250cf28684aaa48bbfd34145f ]

create_elf_tables() runs after setup_new_exec(), so other tasks can already access our new mm and do things like process_madvise() on it. (At the time I'm writing this commit, process_madvise() is not in mainline yet, but has been in akpm's tree for some time.)

While I believe that there are currently no APIs that would actually allow another process to mess up our VMA tree (process_madvise() is limited to MADV_COLD and MADV_PAGEOUT, and uring and userfaultfd cannot reach an mm under which no syscalls have been executed yet), this seems like an accident waiting to happen.

Let's make sure that we always take the mmap lock around GUP paths as long as another process might be able to see the mm.

(Yes, this diff looks suspicious because we drop the lock before doing anything with vma, but that's because we actually don't do anything with it apart from the NULL check.)

---
 fs/binfmt_elf.c | 3 +++
 1 file changed, 3 insertions(+)
fs/binfmt_elf.c +3 -0
index 9fe3b51c116a6..6a0d0427c7433 100644
@@ -309,7 +309,10 @@ create_elf_tables(struct linux_binprm *bprm, const struct elfhdr *exec,
 	 * Grow the stack manually; some architectures have a limit on how
 	 * far ahead a user-space access may be in order to grow the stack.
 	 */
+	if (mmap_read_lock_killable(mm))
+		return -EINTR;
 	vma = find_extend_vma(mm, bprm->p);
+	mmap_read_unlock(mm);
 	if (!vma)
 		return -EFAULT;
 
Signature · 1 line
2.25.1
#100 lore raw

Re: [PATCH AUTOSEL 5.8 100/132] binfmt_elf: take the mmap lock around find_extend_vma()

Quoted 7 lines · Sasha Levin

[ Upstream commit b2767d97f5ff758250cf28684aaa48bbfd34145f ]

create_elf_tables() runs after setup_new_exec(), so other tasks can already access our new mm and do things like process_madvise() on it. (At the time I'm writing this commit, process_madvise() is not in mainline yet, but has been in akpm's tree for some time.)

Quoted 8 lines

While I believe that there are currently no APIs that would actually allow another process to mess up our VMA tree (process_madvise() is limited to MADV_COLD and MADV_PAGEOUT, and uring and userfaultfd cannot reach an mm under which no syscalls have been executed yet), this seems like an accident waiting to happen.

Let's make sure that we always take the mmap lock around GUP paths as long as another process might be able to see the mm.

While this commit makes the kernel less prone to future accidents, and it is arguably fixing locking misbehavior, I don't think it belongs into stable trees? As far as I know, it is not fixing any bugs that can actually materialize in current or past kernels.

author maintainer
#101 lore raw

PATCH 101/132 rpmsg: glink: Use complete_all for open states

In reply to Sasha Levin

From: Chris Lew <[email protected]>

[ Upstream commit 4fcdaf6e28d11e2f3820d54dd23cd12a47ddd44e ]

The open_req and open_ack completion variables are the state variables to represet a remote channel as open. Use complete_all so there are no races with waiters and using completion_done.

---
 drivers/rpmsg/qcom_glink_native.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/rpmsg/qcom_glink_native.c +3 -3
index 1995f5b3ea677..d5114abcde197 100644
@@ -970,7 +970,7 @@ static int qcom_glink_rx_open_ack(struct qcom_glink *glink, unsigned int lcid)
 		return -EINVAL;
 	}
 
-	complete(&channel->open_ack);
+	complete_all(&channel->open_ack);
 
 	return 0;
 }
@@ -1178,7 +1178,7 @@ static int qcom_glink_announce_create(struct rpmsg_device *rpdev)
 	__be32 *val = defaults;
 	int size;
 
-	if (glink->intentless)
+	if (glink->intentless || !completion_done(&channel->open_ack))
 		return 0;
 
 	prop = of_find_property(np, "qcom,intents", NULL);
@@ -1413,7 +1413,7 @@ static int qcom_glink_rx_open(struct qcom_glink *glink, unsigned int rcid,
 	channel->rcid = ret;
 	spin_unlock_irqrestore(&glink->idr_lock, flags);
 
-	complete(&channel->open_req);
+	complete_all(&channel->open_req);
 
 	if (create_device) {
 		rpdev = kzalloc(sizeof(*rpdev), GFP_KERNEL);
Signature · 1 line
2.25.1
author maintainer
#102 lore raw

PATCH 102/132 PCI/ACPI: Add Ampere Altra SOC MCFG quirk

In reply to Sasha Levin

From: Tuan Phan <[email protected]>

[ Upstream commit 877c1a5f79c6984bbe3f2924234c08e2f4f1acd5 ]

Ampere Altra SOC supports only 32-bit ECAM reads. Add an MCFG quirk for the platform.

---
 drivers/acpi/pci_mcfg.c  | 20 ++++++++++++++++++++
 drivers/pci/ecam.c       | 10 ++++++++++
 include/linux/pci-ecam.h |  1 +
 3 files changed, 31 insertions(+)
drivers/acpi/pci_mcfg.c +20 -0
index 54b36b7ad47d9..e526571e0ebdb 100644
@@ -142,6 +142,26 @@ static struct mcfg_fixup mcfg_quirks[] = {
 	XGENE_V2_ECAM_MCFG(4, 0),
 	XGENE_V2_ECAM_MCFG(4, 1),
 	XGENE_V2_ECAM_MCFG(4, 2),
+
+#define ALTRA_ECAM_QUIRK(rev, seg) \
+	{ "Ampere", "Altra   ", rev, seg, MCFG_BUS_ANY, &pci_32b_read_ops }
+
+	ALTRA_ECAM_QUIRK(1, 0),
+	ALTRA_ECAM_QUIRK(1, 1),
+	ALTRA_ECAM_QUIRK(1, 2),
+	ALTRA_ECAM_QUIRK(1, 3),
+	ALTRA_ECAM_QUIRK(1, 4),
+	ALTRA_ECAM_QUIRK(1, 5),
+	ALTRA_ECAM_QUIRK(1, 6),
+	ALTRA_ECAM_QUIRK(1, 7),
+	ALTRA_ECAM_QUIRK(1, 8),
+	ALTRA_ECAM_QUIRK(1, 9),
+	ALTRA_ECAM_QUIRK(1, 10),
+	ALTRA_ECAM_QUIRK(1, 11),
+	ALTRA_ECAM_QUIRK(1, 12),
+	ALTRA_ECAM_QUIRK(1, 13),
+	ALTRA_ECAM_QUIRK(1, 14),
+	ALTRA_ECAM_QUIRK(1, 15),
 };
 
 static char mcfg_oem_id[ACPI_OEM_ID_SIZE];
drivers/pci/ecam.c +10 -0
index 8f065a42fc1a2..b54d32a316693 100644
@@ -168,4 +168,14 @@ const struct pci_ecam_ops pci_32b_ops = {
 		.write		= pci_generic_config_write32,
 	}
 };
+
+/* ECAM ops for 32-bit read only (non-compliant) */
+const struct pci_ecam_ops pci_32b_read_ops = {
+	.bus_shift	= 20,
+	.pci_ops	= {
+		.map_bus	= pci_ecam_map_bus,
+		.read		= pci_generic_config_read32,
+		.write		= pci_generic_config_write,
+	}
+};
 #endif
include/linux/pci-ecam.h +1 -0
index 1af5cb02ef7f9..033ce74f02e81 100644
@@ -51,6 +51,7 @@ extern const struct pci_ecam_ops pci_generic_ecam_ops;
 
 #if defined(CONFIG_ACPI) && defined(CONFIG_PCI_QUIRKS)
 extern const struct pci_ecam_ops pci_32b_ops;	/* 32-bit accesses only */
+extern const struct pci_ecam_ops pci_32b_read_ops; /* 32-bit read only */
 extern const struct pci_ecam_ops hisi_pcie_ops;	/* HiSilicon */
 extern const struct pci_ecam_ops thunder_pem_ecam_ops; /* Cavium ThunderX 1.x & 2.x */
 extern const struct pci_ecam_ops pci_thunder_ecam_ops; /* Cavium ThunderX 1.x */
Signature · 1 line
2.25.1
author maintainer
#103 lore raw

PATCH 103/132 clk: ti: clockdomain: fix static checker warning

In reply to Sasha Levin

From: Tero Kristo <[email protected]>

[ Upstream commit b7a7943fe291b983b104bcbd2f16e8e896f56590 ]

Fix a memory leak induced by not calling clk_put after doing of_clk_get.

---
 drivers/clk/ti/clockdomain.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/clk/ti/clockdomain.c +2 -0
index ee56306f79d5f..700b7f44f6716 100644
@@ -148,10 +148,12 @@ static void __init of_ti_clockdomain_setup(struct device_node *node)
 		if (!omap2_clk_is_hw_omap(clk_hw)) {
 			pr_warn("can't setup clkdm for basic clk %s\n",
 				__clk_get_name(clk));
+			clk_put(clk);
 			continue;
 		}
 		to_clk_hw_omap(clk_hw)->clkdm_name = clkdm_name;
 		omap2_init_clk_clkdm(clk_hw);
+		clk_put(clk);
 	}
 }
 
Signature · 1 line
2.25.1
author maintainer
#104 lore raw

PATCH 104/132 nfsd: rename delegation related tracepoints to make them less confusing

In reply to Sasha Levin

From: Hou Tao <[email protected]>

[ Upstream commit 3caf91757ced158e6c4a44d8b105bd7b3e1767d8 ]

Now when a read delegation is given, two delegation related traces will be printed:

    nfsd_deleg_open: client 5f45b854:e6058001 stateid 00000030:00000001
    nfsd_deleg_none: client 5f45b854:e6058001 stateid 0000002f:00000001

Although the intention is to let developers know two stateid are returned, the traces are confusing about whether or not a read delegation is handled out. So renaming trace_nfsd_deleg_none() to trace_nfsd_open() and trace_nfsd_deleg_open() to trace_nfsd_deleg_read() to make the intension clearer.

The patched traces will be:

    nfsd_deleg_read: client 5f48a967:b55b21cd stateid 00000003:00000001
    nfsd_open: client 5f48a967:b55b21cd stateid 00000002:00000001
---
 fs/nfsd/nfs4state.c | 4 ++--
 fs/nfsd/trace.h     | 4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)
fs/nfsd/nfs4state.c +2 -2
index cea682ce8aa12..2d568d0e55f78 100644
@@ -5100,7 +5100,7 @@ nfs4_open_delegation(struct svc_fh *fh, struct nfsd4_open *open,
 
 	memcpy(&open->op_delegate_stateid, &dp->dl_stid.sc_stateid, sizeof(dp->dl_stid.sc_stateid));
 
-	trace_nfsd_deleg_open(&dp->dl_stid.sc_stateid);
+	trace_nfsd_deleg_read(&dp->dl_stid.sc_stateid);
 	open->op_delegate_type = NFS4_OPEN_DELEGATE_READ;
 	nfs4_put_stid(&dp->dl_stid);
 	return;
@@ -5217,7 +5217,7 @@ nfsd4_process_open2(struct svc_rqst *rqstp, struct svc_fh *current_fh, struct nf
 	nfs4_open_delegation(current_fh, open, stp);
 nodeleg:
 	status = nfs_ok;
-	trace_nfsd_deleg_none(&stp->st_stid.sc_stateid);
+	trace_nfsd_open(&stp->st_stid.sc_stateid);
 out:
 	/* 4.1 client trying to upgrade/downgrade delegation? */
 	if (open->op_delegate_type == NFS4_OPEN_DELEGATE_NONE && dp &&
fs/nfsd/trace.h +2 -2
index 1861db1bdc670..99bf07800cd09 100644
@@ -289,8 +289,8 @@ DEFINE_STATEID_EVENT(layout_recall_done);
 DEFINE_STATEID_EVENT(layout_recall_fail);
 DEFINE_STATEID_EVENT(layout_recall_release);
 
-DEFINE_STATEID_EVENT(deleg_open);
-DEFINE_STATEID_EVENT(deleg_none);
+DEFINE_STATEID_EVENT(open);
+DEFINE_STATEID_EVENT(deleg_read);
 DEFINE_STATEID_EVENT(deleg_break);
 DEFINE_STATEID_EVENT(deleg_recall);
 
Signature · 1 line
2.25.1
author maintainer
#105 lore raw

PATCH 105/132 phy: marvell: comphy: Convert internal SMCC firmware return codes to errno

In reply to Sasha Levin

From: Pali Rohár <[email protected]>

[ Upstream commit ea17a0f153af2cd890e4ce517130dcccaa428c13 ]

Driver ->power_on and ->power_off callbacks leaks internal SMCC firmware return codes to phy caller. This patch converts SMCC error codes to standard linux errno codes. Include file linux/arm-smccc.h already provides defines for SMCC error codes, so use them instead of custom driver defines. Note that return value is signed 32bit, but stored in unsigned long type with zero padding.

---
 drivers/phy/marvell/phy-mvebu-a3700-comphy.c | 14 +++++++++++---
 drivers/phy/marvell/phy-mvebu-cp110-comphy.c | 14 +++++++++++---
 2 files changed, 22 insertions(+), 6 deletions(-)
drivers/phy/marvell/phy-mvebu-a3700-comphy.c +11 -3
index 1a138be8bd6a0..810f25a476321 100644
@@ -26,7 +26,6 @@
 #define COMPHY_SIP_POWER_ON			0x82000001
 #define COMPHY_SIP_POWER_OFF			0x82000002
 #define COMPHY_SIP_PLL_LOCK			0x82000003
-#define COMPHY_FW_NOT_SUPPORTED			(-1)
 
 #define COMPHY_FW_MODE_SATA			0x1
 #define COMPHY_FW_MODE_SGMII			0x2
@@ -112,10 +111,19 @@ static int mvebu_a3700_comphy_smc(unsigned long function, unsigned long lane,
 				  unsigned long mode)
 {
 	struct arm_smccc_res res;
+	s32 ret;
 
 	arm_smccc_smc(function, lane, mode, 0, 0, 0, 0, 0, &res);
+	ret = res.a0;
 
-	return res.a0;
+	switch (ret) {
+	case SMCCC_RET_SUCCESS:
+		return 0;
+	case SMCCC_RET_NOT_SUPPORTED:
+		return -EOPNOTSUPP;
+	default:
+		return -EINVAL;
+	}
 }
 
 static int mvebu_a3700_comphy_get_fw_mode(int lane, int port,
@@ -220,7 +228,7 @@ static int mvebu_a3700_comphy_power_on(struct phy *phy)
 	}
 
 	ret = mvebu_a3700_comphy_smc(COMPHY_SIP_POWER_ON, lane->id, fw_param);
-	if (ret == COMPHY_FW_NOT_SUPPORTED)
+	if (ret == -EOPNOTSUPP)
 		dev_err(lane->dev,
 			"unsupported SMC call, try updating your firmware\n");
 
drivers/phy/marvell/phy-mvebu-cp110-comphy.c +11 -3
index e41367f36ee1c..53ad127b100fe 100644
@@ -123,7 +123,6 @@
 
 #define COMPHY_SIP_POWER_ON	0x82000001
 #define COMPHY_SIP_POWER_OFF	0x82000002
-#define COMPHY_FW_NOT_SUPPORTED	(-1)
 
 /*
  * A lane is described by the following bitfields:
@@ -273,10 +272,19 @@ static int mvebu_comphy_smc(unsigned long function, unsigned long phys,
 			    unsigned long lane, unsigned long mode)
 {
 	struct arm_smccc_res res;
+	s32 ret;
 
 	arm_smccc_smc(function, phys, lane, mode, 0, 0, 0, 0, &res);
+	ret = res.a0;
 
-	return res.a0;
+	switch (ret) {
+	case SMCCC_RET_SUCCESS:
+		return 0;
+	case SMCCC_RET_NOT_SUPPORTED:
+		return -EOPNOTSUPP;
+	default:
+		return -EINVAL;
+	}
 }
 
 static int mvebu_comphy_get_mode(bool fw_mode, int lane, int port,
@@ -819,7 +827,7 @@ static int mvebu_comphy_power_on(struct phy *phy)
 	if (!ret)
 		return ret;
 
-	if (ret == COMPHY_FW_NOT_SUPPORTED)
+	if (ret == -EOPNOTSUPP)
 		dev_err(priv->dev,
 			"unsupported SMC call, try updating your firmware\n");
 
Signature · 1 line
2.25.1
author maintainer
#106 lore raw

PATCH 106/132 asm-generic/io.h: Fix !CONFIG_GENERIC_IOMAP pci_iounmap() implementation

In reply to Sasha Levin

From: Lorenzo Pieralisi <[email protected]>

[ Upstream commit f5810e5c329238b8553ebd98b914bdbefd8e6737 ]

For arches that do not select CONFIG_GENERIC_IOMAP, the current pci_iounmap() function does nothing causing obvious memory leaks for mapped regions that are backed by MMIO physical space.

In order to detect if a mapped pointer is IO vs MMIO, a check must made available to the pci_iounmap() function so that it can actually detect whether the pointer has to be unmapped.

In configurations where CONFIG_HAS_IOPORT_MAP && !CONFIG_GENERIC_IOMAP, a mapped port is detected using an ioport_map() stub defined in asm-generic/io.h.

Use the same logic to implement a stub (ie __pci_ioport_unmap()) that detects if the passed in pointer in pci_iounmap() is IO vs MMIO to iounmap conditionally and call it in pci_iounmap() fixing the issue.

Leave __pci_ioport_unmap() as a NOP for all other config options.

---
 include/asm-generic/io.h | 39 +++++++++++++++++++++++++++------------
 1 file changed, 27 insertions(+), 12 deletions(-)
include/asm-generic/io.h +27 -12
index 30a3aab312e6c..89057394e1862 100644
@@ -911,18 +911,6 @@ static inline void iowrite64_rep(volatile void __iomem *addr,
 #include <linux/vmalloc.h>
 #define __io_virt(x) ((void __force *)(x))
 
-#ifndef CONFIG_GENERIC_IOMAP
-struct pci_dev;
-extern void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max);
-
-#ifndef pci_iounmap
-#define pci_iounmap pci_iounmap
-static inline void pci_iounmap(struct pci_dev *dev, void __iomem *p)
-{
-}
-#endif
-#endif /* CONFIG_GENERIC_IOMAP */
-
 /*
  * Change virtual addresses to physical addresses and vv.
  * These are pretty trivial
@@ -1016,6 +1004,16 @@ static inline void __iomem *ioport_map(unsigned long port, unsigned int nr)
 	port &= IO_SPACE_LIMIT;
 	return (port > MMIO_UPPER_LIMIT) ? NULL : PCI_IOBASE + port;
 }
+#define __pci_ioport_unmap __pci_ioport_unmap
+static inline void __pci_ioport_unmap(void __iomem *p)
+{
+	uintptr_t start = (uintptr_t) PCI_IOBASE;
+	uintptr_t addr = (uintptr_t) p;
+
+	if (addr >= start && addr < start + IO_SPACE_LIMIT)
+		return;
+	iounmap(p);
+}
 #endif
 
 #ifndef ioport_unmap
@@ -1030,6 +1028,23 @@ extern void ioport_unmap(void __iomem *p);
 #endif /* CONFIG_GENERIC_IOMAP */
 #endif /* CONFIG_HAS_IOPORT_MAP */
 
+#ifndef CONFIG_GENERIC_IOMAP
+struct pci_dev;
+extern void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max);
+
+#ifndef __pci_ioport_unmap
+static inline void __pci_ioport_unmap(void __iomem *p) {}
+#endif
+
+#ifndef pci_iounmap
+#define pci_iounmap pci_iounmap
+static inline void pci_iounmap(struct pci_dev *dev, void __iomem *p)
+{
+	__pci_ioport_unmap(p);
+}
+#endif
+#endif /* CONFIG_GENERIC_IOMAP */
+
 /*
  * Convert a virtual cached pointer to an uncached pointer
  */
Signature · 1 line
2.25.1
author maintainer
#107 lore raw

PATCH 107/132 net: 9p: initialize sun_server.sun_path to have addr's value only when addr is valid

In reply to Sasha Levin

From: Anant Thazhemadam <[email protected]>

[ Upstream commit 7ca1db21ef8e0e6725b4d25deed1ca196f7efb28 ]

In p9_fd_create_unix, checking is performed to see if the addr (passed as an argument) is NULL or not.
However, no check is performed to see if addr is a valid address, i.e., it doesn't entirely consist of only 0's.
The initialization of sun_server.sun_path to be equal to this faulty addr value leads to an uninitialized variable, as detected by KMSAN. Checking for this (faulty addr) and returning a negative error number appropriately, resolves this issue.

---
 net/9p/trans_fd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
net/9p/trans_fd.c +1 -1
index 12ecacf0c55fb..60eb9a2b209be 100644
@@ -1023,7 +1023,7 @@ p9_fd_create_unix(struct p9_client *client, const char *addr, char *args)
 
 	csocket = NULL;
 
-	if (addr == NULL)
+	if (!addr || !strlen(addr))
 		return -EINVAL;
 
 	if (strlen(addr) >= UNIX_PATH_MAX) {
Signature · 1 line
2.25.1
author maintainer
#108 lore raw

PATCH 108/132 ceph: encode inodes' parent/d_name in cap reconnect message

In reply to Sasha Levin

From: "Yan, Zheng" <[email protected]>

[ Upstream commit a33f6432b3a63a4909dbbb0967f7c9df8ff2de91 ]

Since nautilus, MDS tracks dirfrags whose child inodes have caps in open file table. When MDS recovers, it prefetches all of these dirfrags. This avoids using backtrace to load inodes. But dirfrags prefetch may load lots of useless inodes into cache, and make MDS run out of memory.

Recent MDS adds an option that disables dirfrags prefetch. When dirfrags prefetch is disabled. Recovering MDS only prefetches corresponding dir inodes. Including inodes' parent/d_name in cap reconnect message can help MDS to load inodes into its cache.

---
 fs/ceph/mds_client.c | 89 ++++++++++++++++++++++++++++++--------------
 1 file changed, 61 insertions(+), 28 deletions(-)
fs/ceph/mds_client.c +61 -28
index 903b6a35b321b..862a5b10ab0ee 100644
@@ -3531,6 +3531,39 @@ static int send_reconnect_partial(struct ceph_reconnect_state *recon_state)
 	return err;
 }
 
+static struct dentry* d_find_primary(struct inode *inode)
+{
+	struct dentry *alias, *dn = NULL;
+
+	if (hlist_empty(&inode->i_dentry))
+		return NULL;
+
+	spin_lock(&inode->i_lock);
+	if (hlist_empty(&inode->i_dentry))
+		goto out_unlock;
+
+	if (S_ISDIR(inode->i_mode)) {
+		alias = hlist_entry(inode->i_dentry.first, struct dentry, d_u.d_alias);
+		if (!IS_ROOT(alias))
+			dn = dget(alias);
+		goto out_unlock;
+	}
+
+	hlist_for_each_entry(alias, &inode->i_dentry, d_u.d_alias) {
+		spin_lock(&alias->d_lock);
+		if (!d_unhashed(alias) &&
+		    (ceph_dentry(alias)->flags & CEPH_DENTRY_PRIMARY_LINK)) {
+			dn = dget_dlock(alias);
+		}
+		spin_unlock(&alias->d_lock);
+		if (dn)
+			break;
+	}
+out_unlock:
+	spin_unlock(&inode->i_lock);
+	return dn;
+}
+
 /*
  * Encode information about a cap for a reconnect with the MDS.
  */
@@ -3544,13 +3577,32 @@ static int reconnect_caps_cb(struct inode *inode, struct ceph_cap *cap,
 	struct ceph_inode_info *ci = cap->ci;
 	struct ceph_reconnect_state *recon_state = arg;
 	struct ceph_pagelist *pagelist = recon_state->pagelist;
-	int err;
+	struct dentry *dentry;
+	char *path;
+	int pathlen, err;
+	u64 pathbase;
 	u64 snap_follows;
 
 	dout(" adding %p ino %llx.%llx cap %p %lld %s\n",
 	     inode, ceph_vinop(inode), cap, cap->cap_id,
 	     ceph_cap_string(cap->issued));
 
+	dentry = d_find_primary(inode);
+	if (dentry) {
+		/* set pathbase to parent dir when msg_version >= 2 */
+		path = ceph_mdsc_build_path(dentry, &pathlen, &pathbase,
+					    recon_state->msg_version >= 2);
+		dput(dentry);
+		if (IS_ERR(path)) {
+			err = PTR_ERR(path);
+			goto out_err;
+		}
+	} else {
+		path = NULL;
+		pathlen = 0;
+		pathbase = 0;
+	}
+
 	spin_lock(&ci->i_ceph_lock);
 	cap->seq = 0;        /* reset cap seq */
 	cap->issue_seq = 0;  /* and issue_seq */
@@ -3571,7 +3623,7 @@ static int reconnect_caps_cb(struct inode *inode, struct ceph_cap *cap,
 		rec.v2.wanted = cpu_to_le32(__ceph_caps_wanted(ci));
 		rec.v2.issued = cpu_to_le32(cap->issued);
 		rec.v2.snaprealm = cpu_to_le64(ci->i_snap_realm->ino);
-		rec.v2.pathbase = 0;
+		rec.v2.pathbase = cpu_to_le64(pathbase);
 		rec.v2.flock_len = (__force __le32)
 			((ci->i_ceph_flags & CEPH_I_ERROR_FILELOCK) ? 0 : 1);
 	} else {
@@ -3582,7 +3634,7 @@ static int reconnect_caps_cb(struct inode *inode, struct ceph_cap *cap,
 		ceph_encode_timespec64(&rec.v1.mtime, &inode->i_mtime);
 		ceph_encode_timespec64(&rec.v1.atime, &inode->i_atime);
 		rec.v1.snaprealm = cpu_to_le64(ci->i_snap_realm->ino);
-		rec.v1.pathbase = 0;
+		rec.v1.pathbase = cpu_to_le64(pathbase);
 	}
 
 	if (list_empty(&ci->i_cap_snaps)) {
@@ -3644,7 +3696,7 @@ static int reconnect_caps_cb(struct inode *inode, struct ceph_cap *cap,
 			    sizeof(struct ceph_filelock);
 		rec.v2.flock_len = cpu_to_le32(struct_len);
 
-		struct_len += sizeof(u32) + sizeof(rec.v2);
+		struct_len += sizeof(u32) + pathlen + sizeof(rec.v2);
 
 		if (struct_v >= 2)
 			struct_len += sizeof(u64); /* snap_follows */
@@ -3668,7 +3720,7 @@ static int reconnect_caps_cb(struct inode *inode, struct ceph_cap *cap,
 			ceph_pagelist_encode_8(pagelist, 1);
 			ceph_pagelist_encode_32(pagelist, struct_len);
 		}
-		ceph_pagelist_encode_string(pagelist, NULL, 0);
+		ceph_pagelist_encode_string(pagelist, path, pathlen);
 		ceph_pagelist_append(pagelist, &rec, sizeof(rec.v2));
 		ceph_locks_to_pagelist(flocks, pagelist,
 				       num_fcntl_locks, num_flock_locks);
@@ -3677,39 +3729,20 @@ static int reconnect_caps_cb(struct inode *inode, struct ceph_cap *cap,
 out_freeflocks:
 		kfree(flocks);
 	} else {
-		u64 pathbase = 0;
-		int pathlen = 0;
-		char *path = NULL;
-		struct dentry *dentry;
-
-		dentry = d_find_alias(inode);
-		if (dentry) {
-			path = ceph_mdsc_build_path(dentry,
-						&pathlen, &pathbase, 0);
-			dput(dentry);
-			if (IS_ERR(path)) {
-				err = PTR_ERR(path);
-				goto out_err;
-			}
-			rec.v1.pathbase = cpu_to_le64(pathbase);
-		}
-
 		err = ceph_pagelist_reserve(pagelist,
 					    sizeof(u64) + sizeof(u32) +
 					    pathlen + sizeof(rec.v1));
-		if (err) {
-			goto out_freepath;
-		}
+		if (err)
+			goto out_err;
 
 		ceph_pagelist_encode_64(pagelist, ceph_ino(inode));
 		ceph_pagelist_encode_string(pagelist, path, pathlen);
 		ceph_pagelist_append(pagelist, &rec, sizeof(rec.v1));
-out_freepath:
-		ceph_mdsc_free_path(path, pathlen);
 	}
 
 out_err:
-	if (err >= 0)
+	ceph_mdsc_free_path(path, pathlen);
+	if (!err)
 		recon_state->nr_caps++;
 	return err;
 }
Signature · 1 line
2.25.1
author maintainer
#109 lore raw

PATCH 109/132 drivers: watchdog: rdc321x_wdt: Fix race condition bugs

In reply to Sasha Levin

From: Madhuparna Bhowmik <[email protected]>

[ Upstream commit 4b2e7f99cdd314263c9d172bc17193b8b6bba463 ]

In rdc321x_wdt_probe(), rdc321x_wdt_device.queue is initialized after misc_register(), hence if ioctl is called before its initialization which can call rdc321x_wdt_start() function, it will see an uninitialized value of rdc321x_wdt_device.queue, hence initialize it before misc_register().
Also, rdc321x_wdt_device.default_ticks is accessed in reset() function called from write callback, thus initialize it before misc_register().

Found by Linux Driver Verification project (linuxtesting.org).

---
 drivers/watchdog/rdc321x_wdt.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)
drivers/watchdog/rdc321x_wdt.c +2 -3
index 57187efeb86f1..f0c94ea51c3e4 100644
@@ -231,6 +231,8 @@ static int rdc321x_wdt_probe(struct platform_device *pdev)
 
 	rdc321x_wdt_device.sb_pdev = pdata->sb_pdev;
 	rdc321x_wdt_device.base_reg = r->start;
+	rdc321x_wdt_device.queue = 0;
+	rdc321x_wdt_device.default_ticks = ticks;
 
 	err = misc_register(&rdc321x_wdt_misc);
 	if (err < 0) {
@@ -245,14 +247,11 @@ static int rdc321x_wdt_probe(struct platform_device *pdev)
 				rdc321x_wdt_device.base_reg, RDC_WDT_RST);
 
 	init_completion(&rdc321x_wdt_device.stop);
-	rdc321x_wdt_device.queue = 0;
 
 	clear_bit(0, &rdc321x_wdt_device.inuse);
 
 	timer_setup(&rdc321x_wdt_device.timer, rdc321x_wdt_trigger, 0);
 
-	rdc321x_wdt_device.default_ticks = ticks;
-
 	dev_info(&pdev->dev, "watchdog init success\n");
 
 	return 0;
Signature · 1 line
2.25.1
author maintainer
#110 lore raw

PATCH 110/132 ext4: Detect already used quota file early

In reply to Sasha Levin

From: Jan Kara <[email protected]>

[ Upstream commit e0770e91424f694b461141cbc99adf6b23006b60 ]

When we try to use file already used as a quota file again (for the same or different quota type), strange things can happen. At the very least lockdep annotations may be wrong but also inode flags may be wrongly set / reset. When the file is used for two quota types at once we can even corrupt the file and likely crash the kernel. Catch all these cases by checking whether passed file is already used as quota file and bail early in that case.

This fixes occasional generic/219 failure due to lockdep complaint.

---
 fs/ext4/super.c | 5 +++++
 1 file changed, 5 insertions(+)
fs/ext4/super.c +5 -0
index 0b38bf29c07e0..04b776501aff8 100644
@@ -5999,6 +5999,11 @@ static int ext4_quota_on(struct super_block *sb, int type, int format_id,
 	/* Quotafile not on the same filesystem? */
 	if (path->dentry->d_sb != sb)
 		return -EXDEV;
+
+	/* Quota already enabled for this file? */
+	if (IS_NOQUOTA(d_inode(path->dentry)))
+		return -EBUSY;
+
 	/* Journaling quota? */
 	if (EXT4_SB(sb)->s_qf_names[type]) {
 		/* Quotafile not in fs root? */
Signature · 1 line
2.25.1
author maintainer
#111 lore raw

PATCH 111/132 PCI: dwc: Add link up check in dw_child_pcie_ops.map_bus()

In reply to Sasha Levin

From: Hou Zhiqiang <[email protected]>

[ Upstream commit 15b23906347c0af8778d1d4edeea415290342d35 ]

NXP Layerscape (ls1028a, ls2088a), dra7xxx and imx6 platforms are either programmed or statically configured to forward the error triggered by a link-down state (eg no connected endpoint device) on the system bus for PCI configuration transactions; these errors are reported as an SError at system level, which is fatal.

Enumerating a PCI tree when the PCIe link is down is not sensible either, so even if the link-up check is racy (link can go down after map_bus() is called) add a link-up check in map_bus() to prevent issuing configuration transactions when the link is down.

SError report:

SError Interrupt on CPU2, code 0xbf000002 -- SError

 CPU: 2 PID: 1 Comm: swapper/0 Not tainted 5.9.0-rc5-next-20200914-00001-gf965d3ec86fa #67
 Hardware name: LS1046A RDB Board (DT)
 pstate: 20000085 (nzCv daIf -PAN -UAO BTYPE=--)
 pc : pci_generic_config_read+0x3c/0xe0
 lr : pci_generic_config_read+0x24/0xe0
 sp : ffff80001003b7b0
 x29: ffff80001003b7b0 x28: ffff80001003ba74
 x27: ffff000971d96800 x26: ffff00096e77e0a8
 x25: ffff80001003b874 x24: ffff80001003b924
 x23: 0000000000000004 x22: 0000000000000000
 x21: 0000000000000000 x20: ffff80001003b874
 x19: 0000000000000004 x18: ffffffffffffffff
 x17: 00000000000000c0 x16: fffffe0025981840
 x15: ffffb94c75b69948 x14: 62203a383634203a
 x13: 666e6f635f726568 x12: 202c31203d207265
 x11: 626d756e3e2d7375 x10: 656877202c307830
 x9 : 203d206e66766564 x8 : 0000000000000908
 x7 : 0000000000000908 x6 : ffff800010900000
 x5 : ffff00096e77e080 x4 : 0000000000000000
 x3 : 0000000000000003 x2 : 84fa3440ff7e7000
 x1 : 0000000000000000 x0 : ffff800010034000
 Kernel panic - not syncing: Asynchronous SError Interrupt
 CPU: 2 PID: 1 Comm: swapper/0 Not tainted 5.9.0-rc5-next-20200914-00001-gf965d3ec86fa #67
 Hardware name: LS1046A RDB Board (DT)
 Call trace:
  dump_backtrace+0x0/0x1c0
  show_stack+0x18/0x28
  dump_stack+0xd8/0x134
  panic+0x180/0x398
  add_taint+0x0/0xb0
  arm64_serror_panic+0x78/0x88
  do_serror+0x68/0x180
  el1_error+0x84/0x100
  pci_generic_config_read+0x3c/0xe0
  dw_pcie_rd_other_conf+0x78/0x110
  pci_bus_read_config_dword+0x88/0xe8
  pci_bus_generic_read_dev_vendor_id+0x30/0x1b0
  pci_bus_read_dev_vendor_id+0x4c/0x78
  pci_scan_single_device+0x80/0x100
---
 drivers/pci/controller/dwc/pcie-designware-host.c | 11 +++++++++++
 1 file changed, 11 insertions(+)
drivers/pci/controller/dwc/pcie-designware-host.c +11 -0
index 0a4a5aa6fe469..d78222ff954ec 100644
@@ -526,6 +526,17 @@ static int dw_pcie_access_other_conf(struct pcie_port *pp, struct pci_bus *bus,
 	void __iomem *va_cfg_base;
 	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
 
+	/*
+	 * Checking whether the link is up here is a last line of defense
+	 * against platforms that forward errors on the system bus as
+	 * SError upon PCI configuration transactions issued when the link
+	 * is down. This check is racy by definition and does not stop
+	 * the system from triggering an SError if the link goes down
+	 * after this check is performed.
+	 */
+	if (!dw_pcie_link_up(pci))
+		return NULL;
+
 	busdev = PCIE_ATU_BUS(bus->number) | PCIE_ATU_DEV(PCI_SLOT(devfn)) |
 		 PCIE_ATU_FUNC(PCI_FUNC(devfn));
 
Signature · 1 line
2.25.1
author maintainer
#112 lore raw

PATCH 112/132 KVM: PPC: Book3S HV: Do not allocate HPT for a nested guest

In reply to Sasha Levin

From: Fabiano Rosas <[email protected]>

[ Upstream commit 05e6295dc7de859c9d56334805485c4d20bebf25 ]

The current nested KVM code does not support HPT guests. This is informed/enforced in some ways:

- Hosts < P9 will not be able to enable the nested HV feature;

- The nested hypervisor MMU capabilities will not contain KVM_CAP_PPC_MMU_HASH_V3;

- QEMU reflects the MMU capabilities in the 'ibm,arch-vec-5-platform-support' device-tree property;

- The nested guest, at 'prom_parse_mmu_model' ignores the 'disable_radix' kernel command line option if HPT is not supported;

- The KVM_PPC_CONFIGURE_V3_MMU ioctl will fail if trying to use HPT.

There is, however, still a way to start a HPT guest by using max-compat-cpu=power8 at the QEMU machine options. This leads to the guest being set to use hash after QEMU calls the KVM_PPC_ALLOCATE_HTAB ioctl.

With the guest set to hash, the nested hypervisor goes through the entry path that has no knowledge of nesting (kvmppc_run_vcpu) and crashes when it tries to execute an hypervisor-privileged (mtspr HDEC) instruction at __kvmppc_vcore_entry:

root@L1:~ $ qemu-system-ppc64 -machine pseries,max-cpu-compat=power8 ...

<snip>

[  538.543303] CPU: 83 PID: 25185 Comm: CPU 0/KVM Not tainted 5.9.0-rc4 #1
[  538.543355] NIP:  c00800000753f388 LR: c00800000753f368 CTR: c0000000001e5ec0
[  538.543417] REGS: c0000013e91e33b0 TRAP: 0700   Not tainted  (5.9.0-rc4)
[  538.543470] MSR:  8000000002843033 <SF,VEC,VSX,FP,ME,IR,DR,RI,LE>  CR: 22422882  XER: 20040000
[  538.543546] CFAR: c00800000753f4b0 IRQMASK: 3
               GPR00: c0080000075397a0 c0000013e91e3640 c00800000755e600 0000000080000000
               GPR04: 0000000000000000 c0000013eab19800 c000001394de0000 00000043a054db72
               GPR08: 00000000003b1652 0000000000000000 0000000000000000 c0080000075502e0
               GPR12: c0000000001e5ec0 c0000007ffa74200 c0000013eab19800 0000000000000008
               GPR16: 0000000000000000 c00000139676c6c0 c000000001d23948 c0000013e91e38b8
               GPR20: 0000000000000053 0000000000000000 0000000000000001 0000000000000000
               GPR24: 0000000000000001 0000000000000001 0000000000000000 0000000000000001
               GPR28: 0000000000000001 0000000000000053 c0000013eab19800 0000000000000001
[  538.544067] NIP [c00800000753f388] __kvmppc_vcore_entry+0x90/0x104 [kvm_hv]
[  538.544121] LR [c00800000753f368] __kvmppc_vcore_entry+0x70/0x104 [kvm_hv]
[  538.544173] Call Trace:
[  538.544196] [c0000013e91e3640] [c0000013e91e3680] 0xc0000013e91e3680 (unreliable)
[  538.544260] [c0000013e91e3820] [c0080000075397a0] kvmppc_run_core+0xbc8/0x19d0 [kvm_hv]
[  538.544325] [c0000013e91e39e0] [c00800000753d99c] kvmppc_vcpu_run_hv+0x404/0xc00 [kvm_hv]
[  538.544394] [c0000013e91e3ad0] [c0080000072da4fc] kvmppc_vcpu_run+0x34/0x48 [kvm]
[  538.544472] [c0000013e91e3af0] [c0080000072d61b8] kvm_arch_vcpu_ioctl_run+0x310/0x420 [kvm]
[  538.544539] [c0000013e91e3b80] [c0080000072c7450] kvm_vcpu_ioctl+0x298/0x778 [kvm]
[  538.544605] [c0000013e91e3ce0] [c0000000004b8c2c] sys_ioctl+0x1dc/0xc90
[  538.544662] [c0000013e91e3dc0] [c00000000002f9a4] system_call_exception+0xe4/0x1c0
[  538.544726] [c0000013e91e3e20] [c00000000000d140] system_call_common+0xf0/0x27c
[  538.544787] Instruction dump:
[  538.544821] f86d1098 60000000 60000000 48000099 e8ad0fe8 e8c500a0 e9264140 75290002
[  538.544886] 7d1602a6 7cec42a6 40820008 7d0807b4 <7d164ba6> 7d083a14 f90d10a0 480104fd
[  538.544953] ---[ end trace 74423e2b948c2e0c ]---

This patch makes the KVM_PPC_ALLOCATE_HTAB ioctl fail when running in the nested hypervisor, causing QEMU to abort.

---
 arch/powerpc/kvm/book3s_hv.c | 6 ++++++
 1 file changed, 6 insertions(+)
arch/powerpc/kvm/book3s_hv.c +6 -0
index 1928b86d6e6b5..51e8353310c2e 100644
@@ -5214,6 +5214,12 @@ static long kvm_arch_vm_ioctl_hv(struct file *filp,
 	case KVM_PPC_ALLOCATE_HTAB: {
 		u32 htab_order;
 
+		/* If we're a nested hypervisor, we currently only support radix */
+		if (kvmhv_on_pseries()) {
+			r = -EOPNOTSUPP;
+			break;
+		}
+
 		r = -EFAULT;
 		if (get_user(htab_order, (u32 __user *)argp))
 			break;
Signature · 1 line
2.25.1
author maintainer
#113 lore raw

PATCH 113/132 scsi: core: Clean up allocation and freeing of sgtables

In reply to Sasha Levin

From: Christoph Hellwig <[email protected]>

[ Upstream commit 7007e9dd56767a95de0947b3f7599bcc2f21687f ]

Rename scsi_init_io() to scsi_alloc_sgtables(), and ensure callers call scsi_free_sgtables() to cleanup failures close to scsi_init_io() instead of leaking it down the generic I/O submission path.

---
 drivers/scsi/scsi_lib.c  | 22 ++++++++--------------
 drivers/scsi/sd.c        | 27 +++++++++++++++------------
 drivers/scsi/sr.c        | 16 ++++++----------
 include/scsi/scsi_cmnd.h |  3 ++-
 4 files changed, 31 insertions(+), 37 deletions(-)
drivers/scsi/scsi_lib.c +8 -14
index ae620dada8ce5..ba8fafd24f4bd 100644
@@ -531,7 +531,7 @@ static void scsi_uninit_cmd(struct scsi_cmnd *cmd)
 	}
 }
 
-static void scsi_free_sgtables(struct scsi_cmnd *cmd)
+void scsi_free_sgtables(struct scsi_cmnd *cmd)
 {
 	if (cmd->sdb.table.nents)
 		sg_free_table_chained(&cmd->sdb.table,
@@ -540,6 +540,7 @@ static void scsi_free_sgtables(struct scsi_cmnd *cmd)
 		sg_free_table_chained(&cmd->prot_sdb->table,
 				SCSI_INLINE_PROT_SG_CNT);
 }
+EXPORT_SYMBOL_GPL(scsi_free_sgtables);
 
 static void scsi_mq_uninit_cmd(struct scsi_cmnd *cmd)
 {
@@ -967,7 +968,7 @@ static inline bool scsi_cmd_needs_dma_drain(struct scsi_device *sdev,
 }
 
 /**
- * scsi_init_io - SCSI I/O initialization function.
+ * scsi_alloc_sgtables - allocate S/G tables for a command
  * @cmd:  command descriptor we wish to initialize
  *
  * Returns:
@@ -975,7 +976,7 @@ static inline bool scsi_cmd_needs_dma_drain(struct scsi_device *sdev,
  * * BLK_STS_RESOURCE - if the failure is retryable
  * * BLK_STS_IOERR    - if the failure is fatal
  */
-blk_status_t scsi_init_io(struct scsi_cmnd *cmd)
+blk_status_t scsi_alloc_sgtables(struct scsi_cmnd *cmd)
 {
 	struct scsi_device *sdev = cmd->device;
 	struct request *rq = cmd->request;
@@ -1067,7 +1068,7 @@ blk_status_t scsi_init_io(struct scsi_cmnd *cmd)
 	scsi_free_sgtables(cmd);
 	return ret;
 }
-EXPORT_SYMBOL(scsi_init_io);
+EXPORT_SYMBOL(scsi_alloc_sgtables);
 
 /**
  * scsi_initialize_rq - initialize struct scsi_cmnd partially
@@ -1155,7 +1156,7 @@ static blk_status_t scsi_setup_scsi_cmnd(struct scsi_device *sdev,
 	 * submit a request without an attached bio.
 	 */
 	if (req->bio) {
-		blk_status_t ret = scsi_init_io(cmd);
+		blk_status_t ret = scsi_alloc_sgtables(cmd);
 		if (unlikely(ret != BLK_STS_OK))
 			return ret;
 	} else {
@@ -1195,7 +1196,6 @@ static blk_status_t scsi_setup_cmnd(struct scsi_device *sdev,
 		struct request *req)
 {
 	struct scsi_cmnd *cmd = blk_mq_rq_to_pdu(req);
-	blk_status_t ret;
 
 	if (!blk_rq_bytes(req))
 		cmd->sc_data_direction = DMA_NONE;
@@ -1205,14 +1205,8 @@ static blk_status_t scsi_setup_cmnd(struct scsi_device *sdev,
 		cmd->sc_data_direction = DMA_FROM_DEVICE;
 
 	if (blk_rq_is_scsi(req))
-		ret = scsi_setup_scsi_cmnd(sdev, req);
-	else
-		ret = scsi_setup_fs_cmnd(sdev, req);
-
-	if (ret != BLK_STS_OK)
-		scsi_free_sgtables(cmd);
-
-	return ret;
+		return scsi_setup_scsi_cmnd(sdev, req);
+	return scsi_setup_fs_cmnd(sdev, req);
 }
 
 static blk_status_t
drivers/scsi/sd.c +15 -12
index 4b2117cb84837..c0c422ad305bc 100644
@@ -866,7 +866,7 @@ static blk_status_t sd_setup_unmap_cmnd(struct scsi_cmnd *cmd)
 	cmd->transfersize = data_len;
 	rq->timeout = SD_TIMEOUT;
 
-	return scsi_init_io(cmd);
+	return scsi_alloc_sgtables(cmd);
 }
 
 static blk_status_t sd_setup_write_same16_cmnd(struct scsi_cmnd *cmd,
@@ -897,7 +897,7 @@ static blk_status_t sd_setup_write_same16_cmnd(struct scsi_cmnd *cmd,
 	cmd->transfersize = data_len;
 	rq->timeout = unmap ? SD_TIMEOUT : SD_WRITE_SAME_TIMEOUT;
 
-	return scsi_init_io(cmd);
+	return scsi_alloc_sgtables(cmd);
 }
 
 static blk_status_t sd_setup_write_same10_cmnd(struct scsi_cmnd *cmd,
@@ -928,7 +928,7 @@ static blk_status_t sd_setup_write_same10_cmnd(struct scsi_cmnd *cmd,
 	cmd->transfersize = data_len;
 	rq->timeout = unmap ? SD_TIMEOUT : SD_WRITE_SAME_TIMEOUT;
 
-	return scsi_init_io(cmd);
+	return scsi_alloc_sgtables(cmd);
 }
 
 static blk_status_t sd_setup_write_zeroes_cmnd(struct scsi_cmnd *cmd)
@@ -1069,7 +1069,7 @@ static blk_status_t sd_setup_write_same_cmnd(struct scsi_cmnd *cmd)
 	 * knows how much to actually write.
 	 */
 	rq->__data_len = sdp->sector_size;
-	ret = scsi_init_io(cmd);
+	ret = scsi_alloc_sgtables(cmd);
 	rq->__data_len = blk_rq_bytes(rq);
 
 	return ret;
@@ -1187,23 +1187,24 @@ static blk_status_t sd_setup_read_write_cmnd(struct scsi_cmnd *cmd)
 	unsigned int dif;
 	bool dix;
 
-	ret = scsi_init_io(cmd);
+	ret = scsi_alloc_sgtables(cmd);
 	if (ret != BLK_STS_OK)
 		return ret;
 
+	ret = BLK_STS_IOERR;
 	if (!scsi_device_online(sdp) || sdp->changed) {
 		scmd_printk(KERN_ERR, cmd, "device offline or changed\n");
-		return BLK_STS_IOERR;
+		goto fail;
 	}
 
 	if (blk_rq_pos(rq) + blk_rq_sectors(rq) > get_capacity(rq->rq_disk)) {
 		scmd_printk(KERN_ERR, cmd, "access beyond end of device\n");
-		return BLK_STS_IOERR;
+		goto fail;
 	}
 
 	if ((blk_rq_pos(rq) & mask) || (blk_rq_sectors(rq) & mask)) {
 		scmd_printk(KERN_ERR, cmd, "request not aligned to the logical block size\n");
-		return BLK_STS_IOERR;
+		goto fail;
 	}
 
 	/*
@@ -1225,7 +1226,7 @@ static blk_status_t sd_setup_read_write_cmnd(struct scsi_cmnd *cmd)
 	if (req_op(rq) == REQ_OP_ZONE_APPEND) {
 		ret = sd_zbc_prepare_zone_append(cmd, &lba, nr_blocks);
 		if (ret)
-			return ret;
+			goto fail;
 	}
 
 	fua = rq->cmd_flags & REQ_FUA ? 0x8 : 0;
@@ -1253,7 +1254,7 @@ static blk_status_t sd_setup_read_write_cmnd(struct scsi_cmnd *cmd)
 	}
 
 	if (unlikely(ret != BLK_STS_OK))
-		return ret;
+		goto fail;
 
 	/*
 	 * We shouldn't disconnect in the middle of a sector, so with a dumb
@@ -1277,10 +1278,12 @@ static blk_status_t sd_setup_read_write_cmnd(struct scsi_cmnd *cmd)
 				     blk_rq_sectors(rq)));
 
 	/*
-	 * This indicates that the command is ready from our end to be
-	 * queued.
+	 * This indicates that the command is ready from our end to be queued.
 	 */
 	return BLK_STS_OK;
+fail:
+	scsi_free_sgtables(cmd);
+	return ret;
 }
 
 static blk_status_t sd_init_command(struct scsi_cmnd *cmd)
drivers/scsi/sr.c +6 -10
index 0c4aa4665a2f9..b74dfd8dc1165 100644
@@ -392,15 +392,11 @@ static blk_status_t sr_init_command(struct scsi_cmnd *SCpnt)
 	struct request *rq = SCpnt->request;
 	blk_status_t ret;
 
-	ret = scsi_init_io(SCpnt);
+	ret = scsi_alloc_sgtables(SCpnt);
 	if (ret != BLK_STS_OK)
-		goto out;
+		return ret;
 	cd = scsi_cd(rq->rq_disk);
 
-	/* from here on until we're complete, any goto out
-	 * is used for a killable error condition */
-	ret = BLK_STS_IOERR;
-
 	SCSI_LOG_HLQUEUE(1, scmd_printk(KERN_INFO, SCpnt,
 		"Doing sr request, block = %d\n", block));
 
@@ -509,12 +505,12 @@ static blk_status_t sr_init_command(struct scsi_cmnd *SCpnt)
 	SCpnt->allowed = MAX_RETRIES;
 
 	/*
-	 * This indicates that the command is ready from our end to be
-	 * queued.
+	 * This indicates that the command is ready from our end to be queued.
 	 */
-	ret = BLK_STS_OK;
+	return BLK_STS_OK;
  out:
-	return ret;
+	scsi_free_sgtables(SCpnt);
+	return BLK_STS_IOERR;
 }
 
 static int sr_block_open(struct block_device *bdev, fmode_t mode)
include/scsi/scsi_cmnd.h +2 -1
index e76bac4d14c51..69ade4fb71aab 100644
@@ -165,7 +165,8 @@ extern void *scsi_kmap_atomic_sg(struct scatterlist *sg, int sg_count,
 				 size_t *offset, size_t *len);
 extern void scsi_kunmap_atomic_sg(void *virt);
 
-extern blk_status_t scsi_init_io(struct scsi_cmnd *cmd);
+blk_status_t scsi_alloc_sgtables(struct scsi_cmnd *cmd);
+void scsi_free_sgtables(struct scsi_cmnd *cmd);
 
 #ifdef CONFIG_SCSI_DMA
 extern int scsi_dma_map(struct scsi_cmnd *cmd);
Signature · 1 line
2.25.1
author maintainer
#114 lore raw

PATCH 114/132 gfs2: call truncate_inode_pages_final for address space glocks

In reply to Sasha Levin

From: Bob Peterson <[email protected]>

[ Upstream commit ee1e2c773e4f4ce2213f9d77cc703b669ca6fa3f ]

Before this patch, we were not calling truncate_inode_pages_final for the address space for glocks, which left the possibility of a leak. We now take care of the problem instead of complaining, and we do it during glock tear-down..

---
 fs/gfs2/glock.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)
fs/gfs2/glock.c +6 -1
index f92876f4f37a1..d8194479b8328 100644
@@ -270,7 +270,12 @@ static void __gfs2_glock_put(struct gfs2_glock *gl)
 	gfs2_glock_remove_from_lru(gl);
 	spin_unlock(&gl->gl_lockref.lock);
 	GLOCK_BUG_ON(gl, !list_empty(&gl->gl_holders));
-	GLOCK_BUG_ON(gl, mapping && mapping->nrpages && !gfs2_withdrawn(sdp));
+	if (mapping) {
+		truncate_inode_pages_final(mapping);
+		if (!gfs2_withdrawn(sdp))
+			GLOCK_BUG_ON(gl, mapping->nrpages ||
+				     mapping->nrexceptional);
+	}
 	trace_gfs2_glock_put(gl);
 	sdp->sd_lockstruct.ls_ops->lm_put_lock(gl);
 }
Signature · 1 line
2.25.1
author maintainer
#115 lore raw

PATCH 115/132 gfs2: Fix NULL pointer dereference in gfs2_rgrp_dump

In reply to Sasha Levin

From: Andrew Price <[email protected]>

[ Upstream commit 0e539ca1bbbe85a86549c97a30a765ada4a09df9 ]

When an rindex entry is found to be corrupt, compute_bitstructs() calls gfs2_consist_rgrpd() which calls gfs2_rgrp_dump() like this:

    gfs2_rgrp_dump(NULL, rgd->rd_gl, fs_id_buf);

gfs2_rgrp_dump then dereferences the gl without checking it and we get

    BUG: KASAN: null-ptr-deref in gfs2_rgrp_dump+0x28/0x280

because there's no rgrp glock involved while reading the rindex on mount.

Fix this by changing gfs2_rgrp_dump to take an rgrp argument.

Reported-by syzbot+43fa87986bdd31df9de6 at syzkaller.appspotmail.com
---
 fs/gfs2/glops.c | 11 ++++++++++-
 fs/gfs2/rgrp.c  |  9 +++------
 fs/gfs2/rgrp.h  |  2 +-
 fs/gfs2/util.c  |  2 +-
 4 files changed, 15 insertions(+), 9 deletions(-)
fs/gfs2/glops.c +10 -1
index de1d5f1d9ff85..c2c90747d79b5 100644
@@ -227,6 +227,15 @@ static void rgrp_go_inval(struct gfs2_glock *gl, int flags)
 		rgd->rd_flags &= ~GFS2_RDF_UPTODATE;
 }
 
+static void gfs2_rgrp_go_dump(struct seq_file *seq, struct gfs2_glock *gl,
+			      const char *fs_id_buf)
+{
+	struct gfs2_rgrpd *rgd = gfs2_glock2rgrp(gl);
+
+	if (rgd)
+		gfs2_rgrp_dump(seq, rgd, fs_id_buf);
+}
+
 static struct gfs2_inode *gfs2_glock2inode(struct gfs2_glock *gl)
 {
 	struct gfs2_inode *ip;
@@ -712,7 +721,7 @@ const struct gfs2_glock_operations gfs2_rgrp_glops = {
 	.go_sync = rgrp_go_sync,
 	.go_inval = rgrp_go_inval,
 	.go_lock = gfs2_rgrp_go_lock,
-	.go_dump = gfs2_rgrp_dump,
+	.go_dump = gfs2_rgrp_go_dump,
 	.go_type = LM_TYPE_RGRP,
 	.go_flags = GLOF_LVB,
 };
fs/gfs2/rgrp.c +3 -6
index 074f228ea8390..1bba5a9d45fa3 100644
@@ -2209,20 +2209,17 @@ static void rgblk_free(struct gfs2_sbd *sdp, struct gfs2_rgrpd *rgd,
 /**
  * gfs2_rgrp_dump - print out an rgrp
  * @seq: The iterator
- * @gl: The glock in question
+ * @rgd: The rgrp in question
  * @fs_id_buf: pointer to file system id (if requested)
  *
  */
 
-void gfs2_rgrp_dump(struct seq_file *seq, struct gfs2_glock *gl,
+void gfs2_rgrp_dump(struct seq_file *seq, struct gfs2_rgrpd *rgd,
 		    const char *fs_id_buf)
 {
-	struct gfs2_rgrpd *rgd = gl->gl_object;
 	struct gfs2_blkreserv *trs;
 	const struct rb_node *n;
 
-	if (rgd == NULL)
-		return;
 	gfs2_print_dbg(seq, "%s R: n:%llu f:%02x b:%u/%u i:%u r:%u e:%u\n",
 		       fs_id_buf,
 		       (unsigned long long)rgd->rd_addr, rgd->rd_flags,
@@ -2253,7 +2250,7 @@ static void gfs2_rgrp_error(struct gfs2_rgrpd *rgd)
 		(unsigned long long)rgd->rd_addr);
 	fs_warn(sdp, "umount on all nodes and run fsck.gfs2 to fix the error\n");
 	sprintf(fs_id_buf, "fsid=%s: ", sdp->sd_fsname);
-	gfs2_rgrp_dump(NULL, rgd->rd_gl, fs_id_buf);
+	gfs2_rgrp_dump(NULL, rgd, fs_id_buf);
 	rgd->rd_flags |= GFS2_RDF_ERROR;
 }
 
fs/gfs2/rgrp.h +1 -1
index a1d7e14fc55b9..9a587ada51eda 100644
@@ -67,7 +67,7 @@ extern void gfs2_rlist_add(struct gfs2_inode *ip, struct gfs2_rgrp_list *rlist,
 extern void gfs2_rlist_alloc(struct gfs2_rgrp_list *rlist);
 extern void gfs2_rlist_free(struct gfs2_rgrp_list *rlist);
 extern u64 gfs2_ri_total(struct gfs2_sbd *sdp);
-extern void gfs2_rgrp_dump(struct seq_file *seq, struct gfs2_glock *gl,
+extern void gfs2_rgrp_dump(struct seq_file *seq, struct gfs2_rgrpd *rgd,
 			   const char *fs_id_buf);
 extern int gfs2_rgrp_send_discards(struct gfs2_sbd *sdp, u64 offset,
 				   struct buffer_head *bh,
fs/gfs2/util.c +1 -1
index 1cd0328cae20a..0fba3bf641890 100644
@@ -419,7 +419,7 @@ void gfs2_consist_rgrpd_i(struct gfs2_rgrpd *rgd,
 	char fs_id_buf[sizeof(sdp->sd_fsname) + 7];
 
 	sprintf(fs_id_buf, "fsid=%s: ", sdp->sd_fsname);
-	gfs2_rgrp_dump(NULL, rgd->rd_gl, fs_id_buf);
+	gfs2_rgrp_dump(NULL, rgd, fs_id_buf);
 	gfs2_lm(sdp,
 		"fatal: filesystem consistency error\n"
 		"  RG = %llu\n"
Signature · 1 line
2.25.1
author maintainer
#116 lore raw

PATCH 116/132 gfs2: use-after-free in sysfs deregistration

In reply to Sasha Levin

From: Jamie Iles <[email protected]>

[ Upstream commit c2a04b02c060c4858762edce4674d5cba3e5a96f ]

syzkaller found the following splat with CONFIG_DEBUG_KOBJECT_RELEASE=y:

  Read of size 1 at addr ffff000028e896b8 by task kworker/1:2/228

  CPU: 1 PID: 228 Comm: kworker/1:2 Tainted: G S                5.9.0-rc8+ #101
  Hardware name: linux,dummy-virt (DT)
  Workqueue: events kobject_delayed_cleanup
  Call trace:
   dump_backtrace+0x0/0x4d8
   show_stack+0x34/0x48
   dump_stack+0x174/0x1f8
   print_address_description.constprop.0+0x5c/0x550
   kasan_report+0x13c/0x1c0
   __asan_report_load1_noabort+0x34/0x60
   memcmp+0xd0/0xd8
   gfs2_uevent+0xc4/0x188
   kobject_uevent_env+0x54c/0x1240
   kobject_uevent+0x2c/0x40
   __kobject_del+0x190/0x1d8
   kobject_delayed_cleanup+0x2bc/0x3b8
   process_one_work+0x96c/0x18c0
   worker_thread+0x3f0/0xc30
   kthread+0x390/0x498
   ret_from_fork+0x10/0x18

  Allocated by task 1110:
   kasan_save_stack+0x28/0x58
   __kasan_kmalloc.isra.0+0xc8/0xe8
   kasan_kmalloc+0x10/0x20
   kmem_cache_alloc_trace+0x1d8/0x2f0
   alloc_super+0x64/0x8c0
   sget_fc+0x110/0x620
   get_tree_bdev+0x190/0x648
   gfs2_get_tree+0x50/0x228
   vfs_get_tree+0x84/0x2e8
   path_mount+0x1134/0x1da8
   do_mount+0x124/0x138
   __arm64_sys_mount+0x164/0x238
   el0_svc_common.constprop.0+0x15c/0x598
   do_el0_svc+0x60/0x150
   el0_svc+0x34/0xb0
   el0_sync_handler+0xc8/0x5b4
   el0_sync+0x15c/0x180

  Freed by task 228:
   kasan_save_stack+0x28/0x58
   kasan_set_track+0x28/0x40
   kasan_set_free_info+0x24/0x48
   __kasan_slab_free+0x118/0x190
   kasan_slab_free+0x14/0x20
   slab_free_freelist_hook+0x6c/0x210
   kfree+0x13c/0x460

Use the same pattern as f2fs + ext4 where the kobject destruction must complete before allowing the FS itself to be freed. This means that we need an explicit free_sbd in the callers.

Cc Bob Peterson <[email protected]>
Cc Andreas Gruenbacher <[email protected]>
[Also go to fail_free when init_names fails.]
---
 fs/gfs2/incore.h     |  1 +
 fs/gfs2/ops_fstype.c | 22 +++++-----------------
 fs/gfs2/super.c      |  1 +
 fs/gfs2/sys.c        |  5 ++++-
 4 files changed, 11 insertions(+), 18 deletions(-)
fs/gfs2/incore.h +1 -0
index ca2ec02436ec7..387e99d6eda9e 100644
@@ -705,6 +705,7 @@ struct gfs2_sbd {
 	struct super_block *sd_vfs;
 	struct gfs2_pcpu_lkstats __percpu *sd_lkstats;
 	struct kobject sd_kobj;
+	struct completion sd_kobj_unregister;
 	unsigned long sd_flags;	/* SDF_... */
 	struct gfs2_sb_host sd_sb;
 
fs/gfs2/ops_fstype.c +5 -17
index 6d18d2c91add2..5bd602a290f72 100644
@@ -1062,26 +1062,14 @@ static int gfs2_fill_super(struct super_block *sb, struct fs_context *fc)
 	}
 
 	error = init_names(sdp, silent);
-	if (error) {
-		/* In this case, we haven't initialized sysfs, so we have to
-		   manually free the sdp. */
-		free_sbd(sdp);
-		sb->s_fs_info = NULL;
-		return error;
-	}
+	if (error)
+		goto fail_free;
 
 	snprintf(sdp->sd_fsname, sizeof(sdp->sd_fsname), "%s", sdp->sd_table_name);
 
 	error = gfs2_sys_fs_add(sdp);
-	/*
-	 * If we hit an error here, gfs2_sys_fs_add will have called function
-	 * kobject_put which causes the sysfs usage count to go to zero, which
-	 * causes sysfs to call function gfs2_sbd_release, which frees sdp.
-	 * Subsequent error paths here will call gfs2_sys_fs_del, which also
-	 * kobject_put to free sdp.
-	 */
 	if (error)
-		return error;
+		goto fail_free;
 
 	gfs2_create_debugfs_file(sdp);
 
@@ -1179,9 +1167,9 @@ static int gfs2_fill_super(struct super_block *sb, struct fs_context *fc)
 	gfs2_lm_unmount(sdp);
 fail_debug:
 	gfs2_delete_debugfs_file(sdp);
-	/* gfs2_sys_fs_del must be the last thing we do, since it causes
-	 * sysfs to call function gfs2_sbd_release, which frees sdp. */
 	gfs2_sys_fs_del(sdp);
+fail_free:
+	free_sbd(sdp);
 	sb->s_fs_info = NULL;
 	return error;
 }
fs/gfs2/super.c +1 -0
index 47d0ae158b699..1f26f1610cba9 100644
@@ -735,6 +735,7 @@ static void gfs2_put_super(struct super_block *sb)
 
 	/*  At this point, we're through participating in the lockspace  */
 	gfs2_sys_fs_del(sdp);
+	free_sbd(sdp);
 }
 
 /**
fs/gfs2/sys.c +4 -1
index d28c41bd69b05..c3e72dba7418a 100644
@@ -303,7 +303,7 @@ static void gfs2_sbd_release(struct kobject *kobj)
 {
 	struct gfs2_sbd *sdp = container_of(kobj, struct gfs2_sbd, sd_kobj);
 
-	free_sbd(sdp);
+	complete(&sdp->sd_kobj_unregister);
 }
 
 static struct kobj_type gfs2_ktype = {
@@ -655,6 +655,7 @@ int gfs2_sys_fs_add(struct gfs2_sbd *sdp)
 	sprintf(ro, "RDONLY=%d", sb_rdonly(sb));
 	sprintf(spectator, "SPECTATOR=%d", sdp->sd_args.ar_spectator ? 1 : 0);
 
+	init_completion(&sdp->sd_kobj_unregister);
 	sdp->sd_kobj.kset = gfs2_kset;
 	error = kobject_init_and_add(&sdp->sd_kobj, &gfs2_ktype, NULL,
 				     "%s", sdp->sd_table_name);
@@ -685,6 +686,7 @@ int gfs2_sys_fs_add(struct gfs2_sbd *sdp)
 fail_reg:
 	fs_err(sdp, "error %d adding sysfs files\n", error);
 	kobject_put(&sdp->sd_kobj);
+	wait_for_completion(&sdp->sd_kobj_unregister);
 	sb->s_fs_info = NULL;
 	return error;
 }
@@ -695,6 +697,7 @@ void gfs2_sys_fs_del(struct gfs2_sbd *sdp)
 	sysfs_remove_group(&sdp->sd_kobj, &tune_group);
 	sysfs_remove_group(&sdp->sd_kobj, &lock_module_group);
 	kobject_put(&sdp->sd_kobj);
+	wait_for_completion(&sdp->sd_kobj_unregister);
 }
 
 static int gfs2_uevent(struct kset *kset, struct kobject *kobj,
Signature · 1 line
2.25.1
author maintainer
#117 lore raw

PATCH 117/132 gfs2: add validation checks for size of superblock

In reply to Sasha Levin

From: Anant Thazhemadam <[email protected]>

[ Upstream commit 0ddc5154b24c96f20e94d653b0a814438de6032b ]

In gfs2_check_sb(), no validation checks are performed with regards to the size of the superblock.
syzkaller detected a slab-out-of-bounds bug that was primarily caused because the block size for a superblock was set to zero.
A valid size for a superblock is a power of 2 between 512 and PAGE_SIZE. Performing validation checks and ensuring that the size of the superblock is valid fixes this bug.

Reported-by syzbot+af90d47a37376844e731 at syzkaller.appspotmail.com
Tested-by syzbot+af90d47a37376844e731 at syzkaller.appspotmail.com
[Minor code reordering.]
---
 fs/gfs2/ops_fstype.c | 18 +++++++++++-------
 1 file changed, 11 insertions(+), 7 deletions(-)
fs/gfs2/ops_fstype.c +11 -7
index 5bd602a290f72..03c33fc03c055 100644
@@ -169,15 +169,19 @@ static int gfs2_check_sb(struct gfs2_sbd *sdp, int silent)
 		return -EINVAL;
 	}
 
-	/*  If format numbers match exactly, we're done.  */
-
-	if (sb->sb_fs_format == GFS2_FORMAT_FS &&
-	    sb->sb_multihost_format == GFS2_FORMAT_MULTI)
-		return 0;
+	if (sb->sb_fs_format != GFS2_FORMAT_FS ||
+	    sb->sb_multihost_format != GFS2_FORMAT_MULTI) {
+		fs_warn(sdp, "Unknown on-disk format, unable to mount\n");
+		return -EINVAL;
+	}
 
-	fs_warn(sdp, "Unknown on-disk format, unable to mount\n");
+	if (sb->sb_bsize < 512 || sb->sb_bsize > PAGE_SIZE ||
+	    (sb->sb_bsize & (sb->sb_bsize - 1))) {
+		pr_warn("Invalid superblock size\n");
+		return -EINVAL;
+	}
 
-	return -EINVAL;
+	return 0;
 }
 
 static void end_bio_io_page(struct bio *bio)
Signature · 1 line
2.25.1
author maintainer
#118 lore raw

PATCH 118/132 Handle STATUS_IO_TIMEOUT gracefully

In reply to Sasha Levin

From: Rohith Surabattula <[email protected]>

[ Upstream commit 8e670f77c4a55013db6d23b962f9bf6673a5e7b6 ]

Currently STATUS_IO_TIMEOUT is not treated as retriable error. It is currently mapped to ETIMEDOUT and returned to userspace for most system calls. STATUS_IO_TIMEOUT is returned by server in case of unavailability or throttling errors.

This patch will map the STATUS_IO_TIMEOUT to EAGAIN, so that it can be retried. Also, added a check to drop the connection to not overload the server in case of ongoing unavailability.

---
 fs/cifs/cifsglob.h     |  2 ++
 fs/cifs/connect.c      | 15 ++++++++++++++-
 fs/cifs/smb2maperror.c |  2 +-
 fs/cifs/smb2ops.c      | 15 +++++++++++++++
 4 files changed, 32 insertions(+), 2 deletions(-)
fs/cifs/cifsglob.h +2 -0
index fad37d61910aa..c330028fd1702 100644
@@ -510,6 +510,8 @@ struct smb_version_operations {
 		      struct fiemap_extent_info *, u64, u64);
 	/* version specific llseek implementation */
 	loff_t (*llseek)(struct file *, struct cifs_tcon *, loff_t, int);
+	/* Check for STATUS_IO_TIMEOUT */
+	bool (*is_status_io_timeout)(char *buf);
 };
 
 struct smb_version_values {
fs/cifs/connect.c +14 -1
index a61abde09ffe1..f36b548786ea5 100644
@@ -69,6 +69,9 @@ extern bool disable_legacy_dialects;
 #define TLINK_ERROR_EXPIRE	(1 * HZ)
 #define TLINK_IDLE_EXPIRE	(600 * HZ)
 
+/* Drop the connection to not overload the server */
+#define NUM_STATUS_IO_TIMEOUT   5
+
 enum {
 	/* Mount options that take no arguments */
 	Opt_user_xattr, Opt_nouser_xattr,
@@ -1116,7 +1119,7 @@ cifs_demultiplex_thread(void *p)
 	struct task_struct *task_to_wake = NULL;
 	struct mid_q_entry *mids[MAX_COMPOUND];
 	char *bufs[MAX_COMPOUND];
-	unsigned int noreclaim_flag;
+	unsigned int noreclaim_flag, num_io_timeout = 0;
 
 	noreclaim_flag = memalloc_noreclaim_save();
 	cifs_dbg(FYI, "Demultiplex PID: %d\n", task_pid_nr(current));
@@ -1212,6 +1215,16 @@ cifs_demultiplex_thread(void *p)
 			continue;
 		}
 
+		if (server->ops->is_status_io_timeout &&
+		    server->ops->is_status_io_timeout(buf)) {
+			num_io_timeout++;
+			if (num_io_timeout > NUM_STATUS_IO_TIMEOUT) {
+				cifs_reconnect(server);
+				num_io_timeout = 0;
+				continue;
+			}
+		}
+
 		server->lstrp = jiffies;
 
 		for (i = 0; i < num_mids; i++) {
fs/cifs/smb2maperror.c +1 -1
index 7fde3775cb574..b004cf87692a7 100644
@@ -488,7 +488,7 @@ static const struct status_to_posix_error smb2_error_map_table[] = {
 	{STATUS_PIPE_CONNECTED, -EIO, "STATUS_PIPE_CONNECTED"},
 	{STATUS_PIPE_LISTENING, -EIO, "STATUS_PIPE_LISTENING"},
 	{STATUS_INVALID_READ_MODE, -EIO, "STATUS_INVALID_READ_MODE"},
-	{STATUS_IO_TIMEOUT, -ETIMEDOUT, "STATUS_IO_TIMEOUT"},
+	{STATUS_IO_TIMEOUT, -EAGAIN, "STATUS_IO_TIMEOUT"},
 	{STATUS_FILE_FORCED_CLOSED, -EIO, "STATUS_FILE_FORCED_CLOSED"},
 	{STATUS_PROFILING_NOT_STARTED, -EIO, "STATUS_PROFILING_NOT_STARTED"},
 	{STATUS_PROFILING_NOT_STOPPED, -EIO, "STATUS_PROFILING_NOT_STOPPED"},
fs/cifs/smb2ops.c +15 -0
index d44df8f95bcd4..8c3b997e718a0 100644
@@ -2346,6 +2346,17 @@ smb2_is_session_expired(char *buf)
 	return true;
 }
 
+static bool
+smb2_is_status_io_timeout(char *buf)
+{
+	struct smb2_sync_hdr *shdr = (struct smb2_sync_hdr *)buf;
+
+	if (shdr->Status == STATUS_IO_TIMEOUT)
+		return true;
+	else
+		return false;
+}
+
 static int
 smb2_oplock_response(struct cifs_tcon *tcon, struct cifs_fid *fid,
 		     struct cifsInodeInfo *cinode)
@@ -4809,6 +4820,7 @@ struct smb_version_operations smb20_operations = {
 	.make_node = smb2_make_node,
 	.fiemap = smb3_fiemap,
 	.llseek = smb3_llseek,
+	.is_status_io_timeout = smb2_is_status_io_timeout,
 };
 
 struct smb_version_operations smb21_operations = {
@@ -4909,6 +4921,7 @@ struct smb_version_operations smb21_operations = {
 	.make_node = smb2_make_node,
 	.fiemap = smb3_fiemap,
 	.llseek = smb3_llseek,
+	.is_status_io_timeout = smb2_is_status_io_timeout,
 };
 
 struct smb_version_operations smb30_operations = {
@@ -5019,6 +5032,7 @@ struct smb_version_operations smb30_operations = {
 	.make_node = smb2_make_node,
 	.fiemap = smb3_fiemap,
 	.llseek = smb3_llseek,
+	.is_status_io_timeout = smb2_is_status_io_timeout,
 };
 
 struct smb_version_operations smb311_operations = {
@@ -5130,6 +5144,7 @@ struct smb_version_operations smb311_operations = {
 	.make_node = smb2_make_node,
 	.fiemap = smb3_fiemap,
 	.llseek = smb3_llseek,
+	.is_status_io_timeout = smb2_is_status_io_timeout,
 };
 
 struct smb_version_values smb20_values = {
Signature · 1 line
2.25.1
author maintainer
#119 lore raw

PATCH 119/132 cifs: handle -EINTR in cifs_setattr

In reply to Sasha Levin

From: Ronnie Sahlberg <[email protected]>

[ Upstream commit c6cc4c5a72505a0ecefc9b413f16bec512f38078 ]

RHBZ: 1848178

Some calls that set attributes, like utimensat(), are not supposed to return -EINTR and thus do not have handlers for this in glibc which causes us to leak -EINTR to the applications which are also unprepared to handle it.

For example tar will break if utimensat() return -EINTR and abort unpacking the archive. Other applications may break too.

To handle this we add checks, and retry, for -EINTR in cifs_setattr()

---
 fs/cifs/inode.c | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)
fs/cifs/inode.c +9 -4
index 7708175062eba..8c0b7f40714ba 100644
@@ -2885,13 +2885,18 @@ cifs_setattr(struct dentry *direntry, struct iattr *attrs)
 {
 	struct cifs_sb_info *cifs_sb = CIFS_SB(direntry->d_sb);
 	struct cifs_tcon *pTcon = cifs_sb_master_tcon(cifs_sb);
+	int rc, retries = 0;
 
-	if (pTcon->unix_ext)
-		return cifs_setattr_unix(direntry, attrs);
-
-	return cifs_setattr_nounix(direntry, attrs);
+	do {
+		if (pTcon->unix_ext)
+			rc = cifs_setattr_unix(direntry, attrs);
+		else
+			rc = cifs_setattr_nounix(direntry, attrs);
+		retries++;
+	} while (is_retryable_error(rc) && retries < 2);
 
 	/* BB: add cifs_setattr_legacy for really old servers */
+	return rc;
 }
 
 #if 0
Signature · 1 line
2.25.1
author maintainer
#120 lore raw

PATCH 120/132 arm64: dts: renesas: ulcb: add full-pwr-cycle-in-suspend into eMMC nodes

In reply to Sasha Levin

From: Yoshihiro Shimoda <[email protected]>

[ Upstream commit 992d7a8b88c83c05664b649fc54501ce58e19132 ]

Add full-pwr-cycle-in-suspend property to do a graceful shutdown of the eMMC device in system suspend.

---
 arch/arm64/boot/dts/renesas/ulcb.dtsi | 1 +
 1 file changed, 1 insertion(+)
arch/arm64/boot/dts/renesas/ulcb.dtsi +1 -0
index ff88af8e39d3f..a2e085db87c53 100644
@@ -469,6 +469,7 @@ &sdhi2 {
 	mmc-hs200-1_8v;
 	mmc-hs400-1_8v;
 	non-removable;
+	full-pwr-cycle-in-suspend;
 	status = "okay";
 };
 
Signature · 1 line
2.25.1
author maintainer
#121 lore raw

PATCH 121/132 ARM: dts: omap4: Fix sgx clock rate for 4430

In reply to Sasha Levin

From: Tony Lindgren <[email protected]>

[ Upstream commit 19d3e9a0bdd57b90175f30390edeb06851f5f9f3 ]

We currently have a different clock rate for droid4 compared to the stock v3.0.8 based Android Linux kernel:

# cat /sys/kernel/debug/clk/dpll_*_m7x2_ck/clk_rate
266666667
307200000
# cat /sys/kernel/debug/clk/l3_gfx_cm:clk:0000:0/clk_rate
307200000

Let's fix this by configuring sgx to use 153.6 MHz instead of 307.2 MHz. Looks like also at least duover needs this change to avoid hangs, so let's apply it for all 4430.

This helps a bit with thermal issues that seem to be related to memory corruption when using sgx. It seems that other driver related issues still remain though.

Cc Arthur Demchenkov <[email protected]>
Cc Merlijn Wajer <[email protected]>
Cc Sebastian Reichel <[email protected]>
---
 arch/arm/boot/dts/omap4.dtsi    |  2 +-
 arch/arm/boot/dts/omap443x.dtsi | 10 ++++++++++
 2 files changed, 11 insertions(+), 1 deletion(-)
arch/arm/boot/dts/omap4.dtsi +1 -1
index 4400f5f8e0992..a70c50edd764b 100644
@@ -389,7 +389,7 @@ abb_iva: regulator-abb-iva {
 			status = "disabled";
 		};
 
-		target-module@56000000 {
+		sgx_module: target-module@56000000 {
 			compatible = "ti,sysc-omap4", "ti,sysc";
 			reg = <0x5600fe00 0x4>,
 			      <0x5600fe10 0x4>;
arch/arm/boot/dts/omap443x.dtsi +10 -0
index cbcdcb4e7d1c2..86b9caf461dfa 100644
@@ -74,3 +74,13 @@ &cpu_thermal {
 };
 
 /include/ "omap443x-clocks.dtsi"
+
+/*
+ * Use dpll_per for sgx at 153.6MHz like droid4 stock v3.0.8 Android kernel
+ */
+&sgx_module {
+	assigned-clocks = <&l3_gfx_clkctrl OMAP4_GPU_CLKCTRL 24>,
+			  <&dpll_per_m7x2_ck>;
+	assigned-clock-rates = <0>, <153600000>;
+	assigned-clock-parents = <&dpll_per_m7x2_ck>;
+};
Signature · 1 line
2.25.1
author maintainer
#122 lore raw

PATCH 122/132 memory: emif: Remove bogus debugfs error handling

In reply to Sasha Levin

From: Dan Carpenter <[email protected]>

[ Upstream commit fd22781648080cc400772b3c68aa6b059d2d5420 ]

Callers are generally not supposed to check the return values from debugfs functions. Debugfs functions never return NULL so this error handling will never trigger. (Historically debugfs functions used to return a mix of NULL and error pointers but it was eventually deemed too complicated for something which wasn't intended to be used in normal situations).

Delete all the error handling.

---
 drivers/memory/emif.c | 33 +++++----------------------------
 1 file changed, 5 insertions(+), 28 deletions(-)
drivers/memory/emif.c +5 -28
index 9d9127bf2a590..74d69c761cfca 100644
@@ -163,35 +163,12 @@ static const struct file_operations emif_mr4_fops = {
 
 static int __init_or_module emif_debugfs_init(struct emif_data *emif)
 {
-	struct dentry	*dentry;
-	int		ret;
-
-	dentry = debugfs_create_dir(dev_name(emif->dev), NULL);
-	if (!dentry) {
-		ret = -ENOMEM;
-		goto err0;
-	}
-	emif->debugfs_root = dentry;
-
-	dentry = debugfs_create_file("regcache_dump", S_IRUGO,
-			emif->debugfs_root, emif, &emif_regdump_fops);
-	if (!dentry) {
-		ret = -ENOMEM;
-		goto err1;
-	}
-
-	dentry = debugfs_create_file("mr4", S_IRUGO,
-			emif->debugfs_root, emif, &emif_mr4_fops);
-	if (!dentry) {
-		ret = -ENOMEM;
-		goto err1;
-	}
-
+	emif->debugfs_root = debugfs_create_dir(dev_name(emif->dev), NULL);
+	debugfs_create_file("regcache_dump", S_IRUGO, emif->debugfs_root, emif,
+			    &emif_regdump_fops);
+	debugfs_create_file("mr4", S_IRUGO, emif->debugfs_root, emif,
+			    &emif_mr4_fops);
 	return 0;
-err1:
-	debugfs_remove_recursive(emif->debugfs_root);
-err0:
-	return ret;
 }
 
 static void __exit emif_debugfs_exit(struct emif_data *emif)
Signature · 1 line
2.25.1
author maintainer
#123 lore raw

PATCH 123/132 ARM: dts: s5pv210: remove DMA controller bus node name to fix dtschema warnings

In reply to Sasha Levin

From: Krzysztof Kozlowski <[email protected]>

[ Upstream commit ea4e792f3c8931fffec4d700cf6197d84e9f35a6 ]

There is no need to keep DMA controller nodes under AMBA bus node. Remove the "amba" node to fix dtschema warnings like:

amba: $nodename:0: 'amba' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'

---
 arch/arm/boot/dts/s5pv210.dtsi | 49 +++++++++++++++-------------------
 1 file changed, 21 insertions(+), 28 deletions(-)
arch/arm/boot/dts/s5pv210.dtsi +21 -28
index 1b0ee884e91db..84e4447931de5 100644
@@ -128,35 +128,28 @@ wakeup-interrupt-controller {
 			};
 		};
 
-		amba {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "simple-bus";
-			ranges;
-
-			pdma0: dma@e0900000 {
-				compatible = "arm,pl330", "arm,primecell";
-				reg = <0xe0900000 0x1000>;
-				interrupt-parent = <&vic0>;
-				interrupts = <19>;
-				clocks = <&clocks CLK_PDMA0>;
-				clock-names = "apb_pclk";
-				#dma-cells = <1>;
-				#dma-channels = <8>;
-				#dma-requests = <32>;
-			};
+		pdma0: dma@e0900000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0xe0900000 0x1000>;
+			interrupt-parent = <&vic0>;
+			interrupts = <19>;
+			clocks = <&clocks CLK_PDMA0>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <32>;
+		};
 
-			pdma1: dma@e0a00000 {
-				compatible = "arm,pl330", "arm,primecell";
-				reg = <0xe0a00000 0x1000>;
-				interrupt-parent = <&vic0>;
-				interrupts = <20>;
-				clocks = <&clocks CLK_PDMA1>;
-				clock-names = "apb_pclk";
-				#dma-cells = <1>;
-				#dma-channels = <8>;
-				#dma-requests = <32>;
-			};
+		pdma1: dma@e0a00000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0xe0a00000 0x1000>;
+			interrupt-parent = <&vic0>;
+			interrupts = <20>;
+			clocks = <&clocks CLK_PDMA1>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <32>;
 		};
 
 		adc: adc@e1700000 {
Signature · 1 line
2.25.1
author maintainer
#124 lore raw

PATCH 124/132 ARM: dts: s5pv210: move fixed clocks under root node

In reply to Sasha Levin

From: Krzysztof Kozlowski <[email protected]>

[ Upstream commit d38cae370e5f2094cbc38db3082b8e9509ae52ce ]

The fixed clocks are kept under dedicated 'external-clocks' node, thus a fake 'reg' was added. This is not correct with dtschema as fixed-clock binding does not have a 'reg' property. Moving fixed clocks out of 'soc' to root node fixes multiple dtbs_check warnings:

external-clocks: $nodename:0: 'external-clocks' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
external-clocks: #size-cells:0:0: 0 is not one of [1, 2]
external-clocks: oscillator@0:reg:0: [0] is too short
external-clocks: oscillator@1:reg:0: [1] is too short
external-clocks: 'ranges' is a required property
oscillator@0: 'reg' does not match any of the regexes: 'pinctrl-[0-9]+'

---
 arch/arm/boot/dts/s5pv210.dtsi | 36 +++++++++++++---------------------
 1 file changed, 14 insertions(+), 22 deletions(-)
arch/arm/boot/dts/s5pv210.dtsi +14 -22
index 84e4447931de5..5c760a6d79557 100644
@@ -52,34 +52,26 @@ cpu@0 {
 		};
 	};
 
+	xxti: oscillator-0 {
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+		clock-output-names = "xxti";
+		#clock-cells = <0>;
+	};
+
+	xusbxti: oscillator-1 {
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+		clock-output-names = "xusbxti";
+		#clock-cells = <0>;
+	};
+
 	soc {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges;
 
-		external-clocks {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			xxti: oscillator@0 {
-				compatible = "fixed-clock";
-				reg = <0>;
-				clock-frequency = <0>;
-				clock-output-names = "xxti";
-				#clock-cells = <0>;
-			};
-
-			xusbxti: oscillator@1 {
-				compatible = "fixed-clock";
-				reg = <1>;
-				clock-frequency = <0>;
-				clock-output-names = "xusbxti";
-				#clock-cells = <0>;
-			};
-		};
-
 		onenand: onenand@b0600000 {
 			compatible = "samsung,s5pv210-onenand";
 			reg = <0xb0600000 0x2000>,
Signature · 1 line
2.25.1
author maintainer
#125 lore raw

PATCH 125/132 ARM: dts: s5pv210: move PMU node out of clock controller

In reply to Sasha Levin

From: Krzysztof Kozlowski <[email protected]>

[ Upstream commit bb98fff84ad1ea321823759edaba573a16fa02bd ]

The Power Management Unit (PMU) is a separate device which has little common with clock controller. Moving it to one level up (from clock controller child to SoC) allows to remove fake simple-bus compatible and dtbs_check warnings like:

clock-controller@e0100000: $nodename:0:

    'clock-controller@e0100000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
---
 arch/arm/boot/dts/s5pv210.dtsi | 13 +++++--------
 1 file changed, 5 insertions(+), 8 deletions(-)
arch/arm/boot/dts/s5pv210.dtsi +5 -8
index 5c760a6d79557..46221a5c8ce59 100644
@@ -92,19 +92,16 @@ chipid@e0000000 {
 		};
 
 		clocks: clock-controller@e0100000 {
-			compatible = "samsung,s5pv210-clock", "simple-bus";
+			compatible = "samsung,s5pv210-clock";
 			reg = <0xe0100000 0x10000>;
 			clock-names = "xxti", "xusbxti";
 			clocks = <&xxti>, <&xusbxti>;
 			#clock-cells = <1>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
+		};
 
-			pmu_syscon: syscon@e0108000 {
-				compatible = "samsung-s5pv210-pmu", "syscon";
-				reg = <0xe0108000 0x8000>;
-			};
+		pmu_syscon: syscon@e0108000 {
+			compatible = "samsung-s5pv210-pmu", "syscon";
+			reg = <0xe0108000 0x8000>;
 		};
 
 		pinctrl0: pinctrl@e0200000 {
Signature · 1 line
2.25.1
author maintainer
#126 lore raw

PATCH 126/132 ARM: dts: s5pv210: remove dedicated 'audio-subsystem' node

In reply to Sasha Levin

From: Krzysztof Kozlowski <[email protected]>

[ Upstream commit 6c17a2974abf68a58517f75741b15c4aba42b4b8 ]

The 'audio-subsystem' node is an artificial creation, not representing real hardware. The hardware is described by its nodes - AUDSS clock controller and I2S0.

Remove the 'audio-subsystem' node along with its undocumented compatible to fix dtbs_check warnings like:

audio-subsystem: $nodename:0: 'audio-subsystem' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'

---
 arch/arm/boot/dts/s5pv210.dtsi | 65 +++++++++++++++-------------------
 1 file changed, 29 insertions(+), 36 deletions(-)
arch/arm/boot/dts/s5pv210.dtsi +29 -36
index 46221a5c8ce59..2871351ab9074 100644
@@ -223,43 +223,36 @@ i2c2: i2c@e1a00000 {
 			status = "disabled";
 		};
 
-		audio-subsystem {
-			compatible = "samsung,s5pv210-audss", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			clk_audss: clock-controller@eee10000 {
-				compatible = "samsung,s5pv210-audss-clock";
-				reg = <0xeee10000 0x1000>;
-				clock-names = "hclk", "xxti",
-						"fout_epll",
-						"sclk_audio0";
-				clocks = <&clocks DOUT_HCLKP>, <&xxti>,
-						<&clocks FOUT_EPLL>,
-						<&clocks SCLK_AUDIO0>;
-				#clock-cells = <1>;
-			};
+		clk_audss: clock-controller@eee10000 {
+			compatible = "samsung,s5pv210-audss-clock";
+			reg = <0xeee10000 0x1000>;
+			clock-names = "hclk", "xxti",
+				      "fout_epll",
+				      "sclk_audio0";
+			clocks = <&clocks DOUT_HCLKP>, <&xxti>,
+				 <&clocks FOUT_EPLL>,
+				 <&clocks SCLK_AUDIO0>;
+			#clock-cells = <1>;
+		};
 
-			i2s0: i2s@eee30000 {
-				compatible = "samsung,s5pv210-i2s";
-				reg = <0xeee30000 0x1000>;
-				interrupt-parent = <&vic2>;
-				interrupts = <16>;
-				dma-names = "rx", "tx", "tx-sec";
-				dmas = <&pdma1 9>, <&pdma1 10>, <&pdma1 11>;
-				clock-names = "iis",
-						"i2s_opclk0",
-						"i2s_opclk1";
-				clocks = <&clk_audss CLK_I2S>,
-						<&clk_audss CLK_I2S>,
-						<&clk_audss CLK_DOUT_AUD_BUS>;
-				samsung,idma-addr = <0xc0010000>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2s0_bus>;
-				#sound-dai-cells = <0>;
-				status = "disabled";
-			};
+		i2s0: i2s@eee30000 {
+			compatible = "samsung,s5pv210-i2s";
+			reg = <0xeee30000 0x1000>;
+			interrupt-parent = <&vic2>;
+			interrupts = <16>;
+			dma-names = "rx", "tx", "tx-sec";
+			dmas = <&pdma1 9>, <&pdma1 10>, <&pdma1 11>;
+			clock-names = "iis",
+				      "i2s_opclk0",
+				      "i2s_opclk1";
+			clocks = <&clk_audss CLK_I2S>,
+				 <&clk_audss CLK_I2S>,
+				 <&clk_audss CLK_DOUT_AUD_BUS>;
+			samsung,idma-addr = <0xc0010000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2s0_bus>;
+			#sound-dai-cells = <0>;
+			status = "disabled";
 		};
 
 		i2s1: i2s@e2100000 {
Signature · 1 line
2.25.1
author maintainer
#127 lore raw

PATCH 127/132 ARM: dts: s5pv210: align SPI GPIO node name with dtschema in Aries

In reply to Sasha Levin

From: Krzysztof Kozlowski <[email protected]>

[ Upstream commit 1ed7f6d0bab2f1794f1eb4ed032e90575552fd21 ]

The device tree schema expects SPI controller to be named "spi", otherwise dtbs_check complain with a warning like:

spi-gpio-0: $nodename:0: 'spi-gpio-0' does not match '^spi(@.*|-[0-9a-f])*$'

---
 arch/arm/boot/dts/s5pv210-aries.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/boot/dts/s5pv210-aries.dtsi +1 -1
index cf858029292ed..aa2138048165c 100644
@@ -507,7 +507,7 @@ poweroff: syscon-poweroff {
 		value = <0x5200>;
 	};
 
-	spi_lcd: spi-gpio-0 {
+	spi_lcd: spi-2 {
 		compatible = "spi-gpio";
 		#address-cells = <1>;
 		#size-cells = <0>;
Signature · 1 line
2.25.1
author maintainer
#128 lore raw

PATCH 128/132 soc: qcom: rpmh-rsc: Sleep waiting for tcs slots to be free

In reply to Sasha Levin

From: Stephen Boyd <[email protected]>

[ Upstream commit 2bc20f3c8487bd5bc4dd9ad2c06d2ba05fd4e838 ]

The busy loop in rpmh_rsc_send_data() is written with the assumption that the udelay will be preempted by the tcs_tx_done() irq handler when the TCS slots are all full. This doesn't hold true when the calling thread is an irqthread and the tcs_tx_done() irq is also an irqthread. That's because kernel irqthreads are SCHED_FIFO and thus need to voluntarily give up priority by calling into the scheduler so that other threads can run.

I see RCU stalls when I boot with irqthreads on the kernel commandline because the modem remoteproc driver is trying to send an rpmh async message from an irqthread that needs to give up the CPU for the rpmh irqthread to run and clear out tcs slots.

 rcu: INFO: rcu_preempt self-detected stall on CPU
 rcu:     0-....: (1 GPs behind) idle=402/1/0x4000000000000002 softirq=2108/2109 fqs=4920
  (t=21016 jiffies g=2933 q=590)
 Task dump for CPU 0:
 irq/11-smp2p    R  running task        0   148      2 0x00000028
 Call trace:
  dump_backtrace+0x0/0x154
  show_stack+0x20/0x2c
  sched_show_task+0xfc/0x108
  dump_cpu_task+0x44/0x50
  rcu_dump_cpu_stacks+0xa4/0xf8
  rcu_sched_clock_irq+0x7dc/0xaa8
  update_process_times+0x30/0x54
  tick_sched_handle+0x50/0x64
  tick_sched_timer+0x4c/0x8c
  __hrtimer_run_queues+0x21c/0x36c
  hrtimer_interrupt+0xf0/0x22c
  arch_timer_handler_phys+0x40/0x50
  handle_percpu_devid_irq+0x114/0x25c
  __handle_domain_irq+0x84/0xc4
  gic_handle_irq+0xd0/0x178
  el1_irq+0xbc/0x180
  save_return_addr+0x18/0x28
  return_address+0x54/0x88
  preempt_count_sub+0x40/0x88
  _raw_spin_unlock_irqrestore+0x4c/0x6c
  ___ratelimit+0xd0/0x128
  rpmh_rsc_send_data+0x24c/0x378
  __rpmh_write+0x1b0/0x208
  rpmh_write_async+0x90/0xbc
  rpmhpd_send_corner+0x60/0x8c
  rpmhpd_aggregate_corner+0x8c/0x124
  rpmhpd_set_performance_state+0x8c/0xbc
  _genpd_set_performance_state+0xdc/0x1b8
  dev_pm_genpd_set_performance_state+0xb8/0xf8
  q6v5_pds_disable+0x34/0x60 [qcom_q6v5_mss]
  qcom_msa_handover+0x38/0x44 [qcom_q6v5_mss]
  q6v5_handover_interrupt+0x24/0x3c [qcom_q6v5]
  handle_nested_irq+0xd0/0x138
  qcom_smp2p_intr+0x188/0x200
  irq_thread_fn+0x2c/0x70
  irq_thread+0xfc/0x14c
  kthread+0x11c/0x12c
  ret_from_fork+0x10/0x18

This busy loop naturally lends itself to using a wait queue so that each thread that tries to send a message will sleep waiting on the waitqueue and only be woken up when a free slot is available. This should make things more predictable too because the scheduler will be able to sleep tasks that are waiting on a free tcs instead of the busy loop we currently have today.

---
 drivers/soc/qcom/rpmh-internal.h |   4 ++
 drivers/soc/qcom/rpmh-rsc.c      | 115 +++++++++++++++----------------
 2 files changed, 58 insertions(+), 61 deletions(-)
drivers/soc/qcom/rpmh-internal.h +4 -0
index ef60e790a750a..344ba687c13be 100644
@@ -8,6 +8,7 @@
 #define __RPM_INTERNAL_H__
 
 #include <linux/bitmap.h>
+#include <linux/wait.h>
 #include <soc/qcom/tcs.h>
 
 #define TCS_TYPE_NR			4
@@ -106,6 +107,8 @@ struct rpmh_ctrlr {
  * @lock:               Synchronize state of the controller.  If RPMH's cache
  *                      lock will also be held, the order is: drv->lock then
  *                      cache_lock.
+ * @tcs_wait:           Wait queue used to wait for @tcs_in_use to free up a
+ *                      slot
  * @client:             Handle to the DRV's client.
  */
 struct rsc_drv {
@@ -118,6 +121,7 @@ struct rsc_drv {
 	struct tcs_group tcs[TCS_TYPE_NR];
 	DECLARE_BITMAP(tcs_in_use, MAX_TCS_NR);
 	spinlock_t lock;
+	wait_queue_head_t tcs_wait;
 	struct rpmh_ctrlr client;
 };
 
drivers/soc/qcom/rpmh-rsc.c +54 -61

163 lines not on this page · raw message

Signature · 1 line
2.25.1
author maintainer
#129 lore raw

PATCH 129/132 firmware: arm_scmi: Move scmi bus init and exit calls into the driver

In reply to Sasha Levin

From: Sudeep Holla <[email protected]>

[ Upstream commit 5a2f0a0bdf201e2183904b6217f9c74774c961a8 ]

In preparation to enable building scmi as a single module, let us move the scmi bus {de-,}initialisation call into the driver.

The main reason for this is to keep it simple instead of maintaining it as separate modules and dealing with all possible initcall races and deferred probe handling. We can move it as separate modules if needed in future.

---
 drivers/firmware/arm_scmi/bus.c    |  6 ++----
 drivers/firmware/arm_scmi/common.h |  3 +++
 drivers/firmware/arm_scmi/driver.c | 16 +++++++++++++++-
 3 files changed, 20 insertions(+), 5 deletions(-)
drivers/firmware/arm_scmi/bus.c +2 -4
index db55c43a2cbda..1377ec76a45db 100644
@@ -230,7 +230,7 @@ static void scmi_devices_unregister(void)
 	bus_for_each_dev(&scmi_bus_type, NULL, NULL, __scmi_devices_unregister);
 }
 
-static int __init scmi_bus_init(void)
+int __init scmi_bus_init(void)
 {
 	int retval;
 
@@ -240,12 +240,10 @@ static int __init scmi_bus_init(void)
 
 	return retval;
 }
-subsys_initcall(scmi_bus_init);
 
-static void __exit scmi_bus_exit(void)
+void __exit scmi_bus_exit(void)
 {
 	scmi_devices_unregister();
 	bus_unregister(&scmi_bus_type);
 	ida_destroy(&scmi_bus_id);
 }
-module_exit(scmi_bus_exit);
drivers/firmware/arm_scmi/common.h +3 -0
index 31fe5a22a0112..927b216e371d8 100644
@@ -154,6 +154,9 @@ void scmi_setup_protocol_implemented(const struct scmi_handle *handle,
 
 int scmi_base_protocol_init(struct scmi_handle *h);
 
+int __init scmi_bus_init(void);
+void __exit scmi_bus_exit(void);
+
 /* SCMI Transport */
 /**
  * struct scmi_chan_info - Structure representing a SCMI channel information
drivers/firmware/arm_scmi/driver.c +15 -1
index 7483cacf63f97..82fa9e4db2272 100644
@@ -919,7 +919,21 @@ static struct platform_driver scmi_driver = {
 	.remove = scmi_remove,
 };
 
-module_platform_driver(scmi_driver);
+static int __init scmi_driver_init(void)
+{
+	scmi_bus_init();
+
+	return platform_driver_register(&scmi_driver);
+}
+module_init(scmi_driver_init);
+
+static void __exit scmi_driver_exit(void)
+{
+	scmi_bus_exit();
+
+	platform_driver_unregister(&scmi_driver);
+}
+module_exit(scmi_driver_exit);
 
 MODULE_ALIAS("platform: arm-scmi");
 MODULE_AUTHOR("Sudeep Holla <[email protected]>");
Signature · 1 line
2.25.1
author maintainer
#130 lore raw

PATCH 130/132 nbd: make the config put is called before the notifying the waiter

In reply to Sasha Levin

From: Xiubo Li <[email protected]>

[ Upstream commit 87aac3a80af5cbad93e63250e8a1e19095ba0d30 ]

There has one race case for ceph's rbd-nbd tool. When do mapping it may fail with EBUSY from ioctl(nbd, NBD_DO_IT), but actually the nbd device has already unmaped.

It dues to if just after the wake_up(), the recv_work() is scheduled out and defers calling the nbd_config_put(), though the map process has exited the "nbd->recv_task" is not cleared.

---
 drivers/block/nbd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/block/nbd.c +1 -1
index bc9dc1f847e19..955b754fd5555 100644
@@ -798,9 +798,9 @@ static void recv_work(struct work_struct *work)
 
 		blk_mq_complete_request(blk_mq_rq_from_pdu(cmd));
 	}
+	nbd_config_put(nbd);
 	atomic_dec(&config->recv_threads);
 	wake_up(&config->recv_wq);
-	nbd_config_put(nbd);
 	kfree(args);
 }
 
Signature · 1 line
2.25.1
author maintainer
#131 lore raw

PATCH 131/132 sgl_alloc_order: fix memory leak

In reply to Sasha Levin

From: Douglas Gilbert <[email protected]>

[ Upstream commit b2a182a40278bc5849730e66bca01a762188ed86 ]

sgl_alloc_order() can fail when 'length' is large on a memory constrained system. When order > 0 it will potentially be making several multi-page allocations with the later ones more likely to fail than the earlier one. So it is important that sgl_alloc_order() frees up any pages it has obtained before returning NULL. In the case when order > 0 it calls the wrong free page function and leaks. In testing the leak was sufficient to bring down my 8 GiB laptop with OOM.

---
 lib/scatterlist.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
lib/scatterlist.c +1 -1
index 5d63a8857f361..c448642e0f786 100644
@@ -514,7 +514,7 @@ struct scatterlist *sgl_alloc_order(unsigned long long length,
 		elem_len = min_t(u64, length, PAGE_SIZE << order);
 		page = alloc_pages(gfp, order);
 		if (!page) {
-			sgl_free(sgl);
+			sgl_free_order(sgl, order);
 			return NULL;
 		}
 
Signature · 1 line
2.25.1
author maintainer
#132 lore raw

PATCH 132/132 nvme-rdma: fix crash when connect rejected

In reply to Sasha Levin

From: Chao Leng <[email protected]>

[ Upstream commit 43efdb8e870ee0f58633fd579aa5b5185bf5d39e ]

A crash can happened when a connect is rejected. The host establishes
the connection after received ConnectReply, and then continues to send the fabrics Connect command. If the controller does not receive the ReadyToUse capsule, host may receive a ConnectReject reply.

Call nvme_rdma_destroy_queue_ib after the host received the RDMA_CM_EVENT_REJECTED event. Then when the fabrics Connect command times out, nvme_rdma_timeout calls nvme_rdma_complete_rq to fail the request. A crash happenes due to use after free in nvme_rdma_complete_rq.

nvme_rdma_destroy_queue_ib is redundant when handling the RDMA_CM_EVENT_REJECTED event as nvme_rdma_destroy_queue_ib is already called in connection failure handler.

---
 drivers/nvme/host/rdma.c | 1 -
 1 file changed, 1 deletion(-)
drivers/nvme/host/rdma.c +0 -1
index 4a0bc8927048a..99f627b0053f7 100644
@@ -1900,7 +1900,6 @@ static int nvme_rdma_cm_handler(struct rdma_cm_id *cm_id,
 		complete(&queue->cm_done);
 		return 0;
 	case RDMA_CM_EVENT_REJECTED:
-		nvme_rdma_destroy_queue_ib(queue);
 		cm_error = nvme_rdma_conn_rejected(queue, ev);
 		break;
 	case RDMA_CM_EVENT_ROUTE_ERROR:
Signature · 1 line
2.25.1