Skip to contentSkip to conversation

4.4.241-rc1 review

PATCH In review Greg Kroah-Hartman 6 participants 119 messages Oct 27, 2020 – Oct 29, 2020 1 message not in the archive

Subsystems (2)
lore
Share & tools
lore

Greg Kroah-Hartman

author maintainer
#0 lore raw

cover 4.4.241-rc1 review

This is the start of the stable review cycle for the 4.4.241 release. There are 112 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Thu, 29 Oct 2020 13:48:36 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.241-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.4.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <[email protected]>

    Linux 4.4.241-rc1

Oliver Neukum <[email protected]>
USB: cdc-wdm: Make wdm_flush() interruptible and add wdm_fsync().

Vincent Mailhol <[email protected]>
usb: cdc-acm: add quirk to blacklist ETAS ES58X devices

Valentin Vidic <[email protected]>
net: korina: cast KSEG0 address to pointer in kfree

Zekun Shen <[email protected]>
ath10k: check idx validity in __ath10k_htt_rx_ring_fill_n()

Eli Billauer <[email protected]>
usb: core: Solve race condition in anchor cleanup functions

Wang Yufen <[email protected]>
brcm80211: fix possible memleak in brcmf_proto_msgbuf_attach

Jan Kara <[email protected]>
reiserfs: Fix memory leak in reiserfs_parse_options()

Peilin Ye <[email protected]>
ipvs: Fix uninit-value in do_ip_vs_set_ctl()

Tong Zhang <[email protected]>
tty: ipwireless: fix error handling

Doug Horn <[email protected]>
Fix use after free in get_capset_info callback.

Chris Chiu <[email protected]>
rtl8xxxu: prevent potential memory leak

Keita Suzuki <[email protected]>
brcmsmac: fix memory leak in wlc_phy_attach_lcnphy

Jing Xiangfeng <[email protected]>
scsi: ibmvfc: Fix error return in ibmvfc_probe()

Abhishek Pandit-Subedi <[email protected]>
Bluetooth: Only mark socket zapped after unlocking

Hamish Martin <[email protected]>
usb: ohci: Default to per-port over-current protection

Darrick J. Wong <[email protected]>
xfs: make sure the rt allocator doesn't run off the end

Eric Biggers <[email protected]>
reiserfs: only call unlock_new_inode() if I_NEW

Keita Suzuki <[email protected]>
misc: rtsx: Fix memory leak in rtsx_pci_probe

Brooke Basile <[email protected]>
ath9k: hif_usb: fix race condition between usb_get_urb() and usb_kill_anchored_urbs()

Jan Kara <[email protected]>
udf: Avoid accessing uninitialized data on failed inode read

Jan Kara <[email protected]>
udf: Limit sparing table size

Zqiang <[email protected]>
usb: gadget: function: printer: fix use-after-free in __lock_acquire

Roman Bolshakov <[email protected]>
scsi: target: core: Add CONTROL field for trace events

Jing Xiangfeng <[email protected]>
scsi: mvumi: Fix error return in mvumi_io_attach()

Christoph Hellwig <[email protected]>
PM: hibernate: remove the bogus call to get_gendisk() in software_resume()

Rustam Kovhaev <[email protected]>
ntfs: add check for mft record size in superblock

Mauro Carvalho Chehab <[email protected]>
media: saa7134: avoid a shift overflow

Pali Rohár <[email protected]>
mmc: sdio: Check for CISTPL_VERS_1 buffer size

Adam Goode <[email protected]>
media: uvcvideo: Ensure all probed info is returned to v4l2

Xiaolong Huang <[email protected]>
media: media/pci: prevent memory leak in bttv_probe

Dinghao Liu <[email protected]>
media: bdisp: Fix runtime PM imbalance on error

Qiushi Wu <[email protected]>
media: exynos4-is: Fix a reference count leak

Qiushi Wu <[email protected]>
media: exynos4-is: Fix a reference count leak due to pm_runtime_get_sync

Qiushi Wu <[email protected]>
media: exynos4-is: Fix several reference count leaks due to pm_runtime_get_sync

Oliver Neukum <[email protected]>
media: ati_remote: sanity check for both endpoints

Pavel Machek <[email protected]>
media: firewire: fix memory leak

Vasant Hegde <[email protected]>
powerpc/powernv/dump: Fix race while processing OPAL dump

Michal Simek <[email protected]>
arm64: dts: zynqmp: Remove additional compatible string for i2c IPs

Krzysztof Kozlowski <[email protected]>
memory: fsl-corenet-cf: Fix handling of platform_get_irq() error

Dan Carpenter <[email protected]>
memory: omap-gpmc: Fix a couple off by ones

Robert Hoo <[email protected]>
KVM: x86: emulating RDPID failure shall return #UD rather than #GP

Krzysztof Kozlowski <[email protected]>
Input: sun4i-ps2 - fix handling of platform_get_irq() error

Krzysztof Kozlowski <[email protected]>
Input: omap4-keypad - fix handling of platform_get_irq() error

Krzysztof Kozlowski <[email protected]>
Input: ep93xx_keypad - fix handling of platform_get_irq() error

Dan Carpenter <[email protected]>
Input: imx6ul_tsc - clean up some errors in imx6ul_tsc_resume()

Alex Williamson <[email protected]>
vfio/pci: Clear token on bypass registration failure

Tobias Jordan <[email protected]>
lib/crc32.c: fix trivial typo in preprocessor condition

Srikar Dronamraju <[email protected]>
cpufreq: powernv: Fix frame-size-overflow in powernv_cpufreq_reboot_notifier

Kajol Jain <[email protected]>
powerpc/perf/hv-gpci: Fix starting index value

Daniel Thompson <[email protected]>
kdb: Fix pager search for multi-line strings

Adrian Hunter <[email protected]>
perf intel-pt: Fix "context_switch event has no tid" error

Finn Thain <[email protected]>
powerpc/tau: Disable TAU between measurements

Finn Thain <[email protected]>
powerpc/tau: Remove duplicated set_thresholds() call

Finn Thain <[email protected]>
powerpc/tau: Use appropriate temperature sample interval

Guillaume Tucker <[email protected]>
ARM: 9007/1: l2c: fix prefetch bits init in L2X0_AUX_CTRL using DT values

Mark Tomlinson <[email protected]>
mtd: mtdoops: Don't write panic data twice

Arnd Bergmann <[email protected]>
mtd: lpddr: fix excessive stack usage with clang

Nicholas Mc Guire <[email protected]>
powerpc/icp-hv: Fix missing of_node_put() in success path

Nicholas Mc Guire <[email protected]>
powerpc/pseries: Fix missing of_node_put() in rng_init()

Håkon Bugge <[email protected]>
IB/mlx4: Adjust delayed work when a dup is observed

Valentin Vidic <[email protected]>
net: korina: fix kfree of rx/tx descriptor array

Tom Rix <[email protected]>
mwifiex: fix double free

Johannes Berg <[email protected]>
nl80211: fix non-split wiphy information

Lorenzo Colitti <[email protected]>
usb: gadget: u_ether: enable qmult on SuperSpeed Plus as well

Dan Carpenter <[email protected]>
mfd: sm501: Fix leaks in probe()

Thomas Gleixner <[email protected]>
net: enic: Cure the enic api locking trainwreck

Eric Dumazet <[email protected]>
quota: clear padding in v2r1_mem2diskdqb()

Takashi Iwai <[email protected]>
ALSA: seq: oss: Avoid mutex lock for a long-time ioctl

Souptick Joarder <[email protected]>
misc: mic: scif: Fix error handling path

Dan Carpenter <[email protected]>
ath6kl: wmi: prevent a shift wrapping bug in ath6kl_wmi_delete_pstream_cmd()

Dan Carpenter <[email protected]>
HID: roccat: add bounds checking in kone_sysfs_write_settings()

Tom Rix <[email protected]>
video: fbdev: sis: fix null ptr dereference

Colin Ian King <[email protected]>
video: fbdev: vga16fb: fix setting of pixclock because a pass-by-value error

Souptick Joarder <[email protected]>
drivers/virt/fsl_hypervisor: Fix error handling path

Artem Savkov <[email protected]>

    pty: do tty_flip_buffer_push without port->lock in pty_write

Tyrel Datwyler <[email protected]>

    tty: hvcs: Don't NULL tty->driver_data until hvcs_cleanup()

Tong Zhang <[email protected]>
tty: serial: earlycon dependency

Alex Dewar <[email protected]>
VMCI: check return value of get_user_pages_fast() for errors

[email protected] <[email protected]>
backlight: sky81452-backlight: Fix refcount imbalance on error

Tianjia Zhang <[email protected]>
scsi: csiostor: Fix wrong return value in csio_hw_prep_fw()

Christophe JAILLET <[email protected]>
scsi: qla4xxx: Fix an error handling path in 'qla4xxx_get_host_stats()'

Tom Rix <[email protected]>
drm/gma500: fix error check

Christophe JAILLET <[email protected]>
mwifiex: Do not use GFP_KERNEL in atomic context

Bryan O'Donoghue <[email protected]>

    wcn36xx: Fix reported 802.11n rx_highest rate wcn3660/wcn3680

Dan Carpenter <[email protected]>
ath9k: Fix potential out of bounds in ath9k_htc_txcompletion_cb()

Dan Carpenter <[email protected]>
ath6kl: prevent potential array overflow in ath6kl_add_new_sta()

Qiushi Wu <[email protected]>
media: ti-vpe: Fix a missing check and reference count leak

Tom Rix <[email protected]>
media: tc358743: initialize variable

Tero Kristo <[email protected]>
crypto: omap-sham - fix digcnt register handling with export/import

Dinghao Liu <[email protected]>
media: omap3isp: Fix memleak in isp_probe

Tom Rix <[email protected]>
media: m5mols: Check function pointer in m5mols_sensor_power

Sylwester Nawrocki <[email protected]>
media: Revert "media: exynos4-is: Add missed check for pinctrl_lookup_state()"

Christophe JAILLET <[email protected]>
crypto: ixp4xx - Fix the size used in a 'dma_free_coherent()' call

Dinghao Liu <[email protected]>
EDAC/i5100: Fix error handling order in i5100_init_one()

Roberto Sassu <[email protected]>
ima: Don't ignore errors from crypto_shash_update()

Dan Carpenter <[email protected]>
cifs: remove bogus debug code

Eric Dumazet <[email protected]>
icmp: randomize the global rate limiter

Neal Cardwell <[email protected]>
tcp: fix to update snd_wl1 in bulk receiver fast path

Defang Bo <[email protected]>
nfc: Ensure presence of NFC_ATTR_FIRMWARE_NAME attribute in nfc_genl_fw_download()

Xie He <[email protected]>
net: hdlc_raw_eth: Clear the IFF_TX_SKB_SHARING flag after calling ether_setup

Xie He <[email protected]>
net: hdlc: In hdlc_rcv, check to make sure dev is an HDLC device

Andrey Ryabinin <[email protected]>
x86/mm/ptdump: Fix soft lockup in page table walker

Andrey Ryabinin <[email protected]>
lib/strscpy: Shut up KASAN false-positives in strscpy()

Andrey Ryabinin <[email protected]>
compiler.h: Add read_word_at_a_time() function.

Andrey Ryabinin <[email protected]>
compiler.h, kasan: Avoid duplicating __read_once_size_nocheck()

Andrey Ryabinin <[email protected]>
mm/kasan: add API to check memory regions

Andrey Ryabinin <[email protected]>
mm/kasan: print name of mem[set,cpy,move]() caller in report

Dan Carpenter <[email protected]>
ALSA: bebob: potential info leak in hwdep_read()

Heiner Kallweit <[email protected]>
r8169: fix data corruption issue on RTL8402

Maciej Żenczykowski <[email protected]>
net/ipv4: always honour route mtu during forwarding

Cong Wang <[email protected]>
tipc: fix the skb_unshare() in tipc_buf_append()

David Wilder <[email protected]>
ibmveth: Identify ingress large send packets.

-------------

Diffstat:

 Documentation/networking/ip-sysctl.txt             |   4 +-
 Makefile                                           |   4 +-
 arch/arm/mm/cache-l2x0.c                           |  16 ++-
 arch/arm64/boot/dts/xilinx/zynqmp.dtsi             |   4 +-
 arch/powerpc/include/asm/reg.h                     |   2 +-
 arch/powerpc/kernel/tau_6xx.c                      |  82 +++++----------
 arch/powerpc/perf/hv-gpci-requests.h               |   6 +-
 arch/powerpc/platforms/Kconfig                     |   9 +-
 arch/powerpc/platforms/powernv/opal-dump.c         |  41 +++++---
 arch/powerpc/platforms/pseries/rng.c               |   1 +
 arch/powerpc/sysdev/xics/icp-hv.c                  |   1 +
 arch/x86/kvm/emulate.c                             |   2 +-
 arch/x86/mm/dump_pagetables.c                      |   2 +
 drivers/cpufreq/powernv-cpufreq.c                  |   9 +-
 drivers/crypto/ixp4xx_crypto.c                     |   2 +-
 drivers/crypto/omap-sham.c                         |   3 +
 drivers/edac/i5100_edac.c                          |  11 +-
 drivers/gpu/drm/gma500/cdv_intel_dp.c              |   2 +-
 drivers/gpu/drm/virtio/virtgpu_kms.c               |   2 +
 drivers/gpu/drm/virtio/virtgpu_vq.c                |  10 +-
 drivers/hid/hid-roccat-kone.c                      |  23 ++--
 drivers/infiniband/hw/mlx4/cm.c                    |   3 +
 drivers/input/keyboard/ep93xx_keypad.c             |   4 +-
 drivers/input/keyboard/omap4-keypad.c              |   6 +-
 drivers/input/serio/sun4i-ps2.c                    |   9 +-
 drivers/input/touchscreen/imx6ul_tsc.c             |  27 +++--
 drivers/media/firewire/firedtv-fw.c                |   6 +-
 drivers/media/i2c/m5mols/m5mols_core.c             |   3 +-
 drivers/media/i2c/tc358743.c                       |   2 +-
 drivers/media/pci/bt8xx/bttv-driver.c              |  13 ++-
 drivers/media/pci/saa7134/saa7134-tvaudio.c        |   3 +-
 drivers/media/platform/exynos4-is/fimc-isp.c       |   4 +-
 drivers/media/platform/exynos4-is/fimc-lite.c      |   2 +-
 drivers/media/platform/exynos4-is/media-dev.c      |   8 +-
 drivers/media/platform/exynos4-is/mipi-csis.c      |   4 +-
 drivers/media/platform/omap3isp/isp.c              |   6 +-
 drivers/media/platform/sti/bdisp/bdisp-v4l2.c      |   3 +-
 drivers/media/platform/ti-vpe/vpe.c                |   2 +
 drivers/media/rc/ati_remote.c                      |   4 +
 drivers/media/usb/uvc/uvc_v4l2.c                   |  30 ++++++
 drivers/memory/fsl-corenet-cf.c                    |   6 +-
 drivers/memory/omap-gpmc.c                         |   4 +-
 drivers/mfd/rtsx_pcr.c                             |   4 +-
 drivers/mfd/sm501.c                                |   8 +-
 drivers/misc/mic/scif/scif_rma.c                   |   4 +-
 drivers/misc/vmw_vmci/vmci_queue_pair.c            |  10 +-
 drivers/mmc/core/sdio_cis.c                        |   3 +
 drivers/mtd/lpddr/lpddr2_nvm.c                     |  35 ++++---
 drivers/mtd/mtdoops.c                              |  11 +-
 drivers/net/ethernet/cisco/enic/enic.h             |   1 +
 drivers/net/ethernet/cisco/enic/enic_api.c         |   6 ++
 drivers/net/ethernet/cisco/enic/enic_main.c        |  27 +++--
 drivers/net/ethernet/ibm/ibmveth.c                 |  13 ++-
 drivers/net/ethernet/korina.c                      |   3 +-
 drivers/net/ethernet/realtek/r8169.c               | 116 +++++++++++----------
 drivers/net/wan/hdlc.c                             |  10 +-
 drivers/net/wan/hdlc_raw_eth.c                     |   1 +
 drivers/net/wireless/ath/ath10k/htt_rx.c           |   8 ++
 drivers/net/wireless/ath/ath6kl/main.c             |   3 +
 drivers/net/wireless/ath/ath6kl/wmi.c              |   5 +
 drivers/net/wireless/ath/ath9k/hif_usb.c           |  19 ++++
 drivers/net/wireless/ath/ath9k/htc_hst.c           |   2 +
 drivers/net/wireless/ath/wcn36xx/main.c            |   2 +-
 drivers/net/wireless/brcm80211/brcmfmac/msgbuf.c   |   2 +
 .../net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c  |   4 +-
 drivers/net/wireless/mwifiex/scan.c                |   2 +-
 drivers/net/wireless/mwifiex/sdio.c                |   2 +
 drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c   |  10 +-
 drivers/scsi/csiostor/csio_hw.c                    |   2 +-
 drivers/scsi/ibmvscsi/ibmvfc.c                     |   1 +
 drivers/scsi/mvumi.c                               |   1 +
 drivers/scsi/qla4xxx/ql4_os.c                      |   2 +-
 drivers/tty/hvc/hvcs.c                             |  14 +--
 drivers/tty/ipwireless/network.c                   |   4 +-
 drivers/tty/ipwireless/tty.c                       |   2 +-
 drivers/tty/pty.c                                  |   2 +-
 drivers/tty/serial/Kconfig                         |   1 +
 drivers/usb/class/cdc-acm.c                        |  11 ++
 drivers/usb/class/cdc-wdm.c                        |  72 ++++++++++---
 drivers/usb/core/urb.c                             |  89 +++++++++-------
 drivers/usb/gadget/function/f_printer.c            |  16 ++-
 drivers/usb/gadget/function/u_ether.c              |   2 +-
 drivers/usb/host/ohci-hcd.c                        |  16 +--
 drivers/vfio/pci/vfio_pci_intrs.c                  |   4 +-
 drivers/video/backlight/sky81452-backlight.c       |   1 +
 drivers/video/fbdev/sis/init.c                     |  11 +-
 drivers/video/fbdev/vga16fb.c                      |  14 +--
 drivers/virt/fsl_hypervisor.c                      |  17 ++-
 fs/cifs/asn1.c                                     |  16 +--
 fs/ntfs/inode.c                                    |   6 ++
 fs/quota/quota_v2.c                                |   1 +
 fs/reiserfs/inode.c                                |   3 +-
 fs/reiserfs/super.c                                |   8 +-
 fs/udf/inode.c                                     |  25 +++--
 fs/udf/super.c                                     |   6 ++
 fs/xfs/xfs_rtalloc.c                               |  11 ++
 include/linux/compiler.h                           |  22 ++--
 include/linux/kasan-checks.h                       |  12 +++
 include/net/ip.h                                   |   6 ++
 include/scsi/scsi_common.h                         |   7 ++
 include/trace/events/target.h                      |  12 +--
 kernel/debug/kdb/kdb_io.c                          |   8 +-
 kernel/power/hibernate.c                           |  11 --
 lib/crc32.c                                        |   2 +-
 lib/string.c                                       |   2 +-
 mm/kasan/kasan.c                                   |  76 ++++++++------
 net/bluetooth/l2cap_sock.c                         |   7 +-
 net/ipv4/icmp.c                                    |   7 +-
 net/ipv4/tcp_input.c                               |   2 +
 net/netfilter/ipvs/ip_vs_ctl.c                     |   7 +-
 net/nfc/netlink.c                                  |   2 +-
 net/tipc/msg.c                                     |   3 +-
 net/wireless/nl80211.c                             |   5 +-
 security/integrity/ima/ima_crypto.c                |   2 +
 sound/core/seq/oss/seq_oss.c                       |   7 +-
 sound/firewire/bebob/bebob_hwdep.c                 |   3 +-
 tools/perf/util/intel-pt.c                         |   8 +-
 117 files changed, 812 insertions(+), 453 deletions(-)
author maintainer
#1 lore raw

PATCH 1/112 ibmveth: Identify ingress large send packets.

From: David Wilder <[email protected]>

[ Upstream commit 413f142cc05cb03f2d1ea83388e40c1ddc0d74e9 ]

Ingress large send packets are identified by either:
The IBMVETH_RXQ_LRG_PKT flag in the receive buffer
or with a -1 placed in the ip header checksum.
The method used depends on firmware version. Frame geometry and sufficient header validation is performed by the hypervisor eliminating the need for further header checks here.

---
 drivers/net/ethernet/ibm/ibmveth.c |   13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)
drivers/net/ethernet/ibm/ibmveth.c +12 -1
@@ -1254,6 +1254,7 @@ static int ibmveth_poll(struct napi_stru
 			int offset = ibmveth_rxq_frame_offset(adapter);
 			int csum_good = ibmveth_rxq_csum_good(adapter);
 			int lrg_pkt = ibmveth_rxq_large_packet(adapter);
+			__sum16 iph_check = 0;
 
 			skb = ibmveth_rxq_get_buffer(adapter);
 
@@ -1305,7 +1306,17 @@ static int ibmveth_poll(struct napi_stru
 				}
 			}
 
-			if (length > netdev->mtu + ETH_HLEN) {
+			/* PHYP without PLSO support places a -1 in the ip
+			 * checksum for large send frames.
+			 */
+			if (skb->protocol == cpu_to_be16(ETH_P_IP)) {
+				struct iphdr *iph = (struct iphdr *)skb->data;
+
+				iph_check = iph->check;
+			}
+
+			if ((length > netdev->mtu + ETH_HLEN) ||
+			    lrg_pkt || iph_check == 0xffff) {
 				ibmveth_rx_mss_helper(skb, mss, lrg_pkt);
 				adapter->rx_large_packets++;
 			}
author maintainer
#2 lore raw

PATCH 2/112 tipc: fix the skb_unshare() in tipc_buf_append()

In reply to Greg Kroah-Hartman

From: Cong Wang <[email protected]>

[ Upstream commit ed42989eab57d619667d7e87dfbd8fe207db54fe ]

skb_unshare() drops a reference count on the old skb unconditionally, so in the failure case, we end up freeing the skb twice here. And because the skb is allocated in fclone and cloned by caller tipc_msg_reassemble(), the consequence is actually freeing the original skb too, thus triggered the UAF by syzbot.

Fix this by replacing this skb_unshare() with skb_cloned()+skb_copy().

Fixes ff48b6222e65 ("tipc: use skb_unshare() instead in tipc_buf_append()")
Reported-and-tested-by [email protected]
Cc Jon Maloy <[email protected]>
Cc Ying Xue <[email protected]>
---
 net/tipc/msg.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
net/tipc/msg.c +2 -1
@@ -138,7 +138,8 @@ int tipc_buf_append(struct sk_buff **hea
 	if (fragid == FIRST_FRAGMENT) {
 		if (unlikely(head))
 			goto err;
-		frag = skb_unshare(frag, GFP_ATOMIC);
+		if (skb_cloned(frag))
+			frag = skb_copy(frag, GFP_ATOMIC);
 		if (unlikely(!frag))
 			goto err;
 		head = *headbuf = frag;
author maintainer
#3 lore raw

PATCH 3/112 net/ipv4: always honour route mtu during forwarding

In reply to Greg Kroah-Hartman

From: "Maciej Żenczykowski" <[email protected]>

[ Upstream commit 02a1b175b0e92d9e0fa5df3957ade8d733ceb6a0 ]

Documentation/networking/ip-sysctl.txt:46 says:
ip_forward_use_pmtu - BOOLEAN
By default we don't trust protocol path MTUs while forwarding because they could be easily forged and can lead to unwanted fragmentation by the router.
You only need to enable this if you have user-space software which tries to discover path mtus by itself and depends on the kernel honoring this information. This is normally not the case.
Default: 0 (disabled)
Possible values:
0 - disabled
1 - enabled

Which makes it pretty clear that setting it to 1 is a potential security/safety/DoS issue, and yet it is entirely reasonable to want forwarded traffic to honour explicitly administrator configured route mtus (instead of defaulting to device mtu).

Indeed, I can't think of a single reason why you wouldn't want to. Since you configured a route mtu you probably know better...

It is pretty common to have a higher device mtu to allow receiving large (jumbo) frames, while having some routes via that interface (potentially including the default route to the internet) specify a lower mtu.

Note that ipv6 forwarding uses device mtu unless the route is locked (in which case it will use the route mtu).

This approach is not usable for IPv4 where an 'mtu lock' on a route also has the side effect of disabling TCP path mtu discovery via disabling the IPv4 DF (don't frag) bit on all outgoing frames.

I'm not aware of a way to lock a route from an IPv6 RA, so that also potentially seems wrong.

Cc Eric Dumazet <[email protected]>
Cc Willem de Bruijn <[email protected]>
Cc Lorenzo Colitti <[email protected]>
Cc Sunmeet Gill (Sunny) <[email protected]>
Cc Vinay Paradkar <[email protected]>
Cc Tyler Wear <[email protected]>
Cc David Ahern <[email protected]>
---
 include/net/ip.h |    6 ++++++
 1 file changed, 6 insertions(+)
include/net/ip.h +6 -0
@@ -317,12 +317,18 @@ static inline unsigned int ip_dst_mtu_ma
 						    bool forwarding)
 {
 	struct net *net = dev_net(dst->dev);
+	unsigned int mtu;
 
 	if (net->ipv4.sysctl_ip_fwd_use_pmtu ||
 	    ip_mtu_locked(dst) ||
 	    !forwarding)
 		return dst_mtu(dst);
 
+	/* 'forwarding = true' case should always honour route mtu */
+	mtu = dst_metric_raw(dst, RTAX_MTU);
+	if (mtu)
+		return mtu;
+
 	return min(READ_ONCE(dst->dev->mtu), IP_MAX_MTU);
 }
 
author maintainer
#4 lore raw

PATCH 4/112 r8169: fix data corruption issue on RTL8402

In reply to Greg Kroah-Hartman

From: Heiner Kallweit <[email protected]>

[ Upstream commit ef9da46ddef071e1bbb943afbbe9b38771855554 ]

Petr reported that after resume from suspend RTL8402 partially truncates incoming packets, and re-initializing register RxConfig before the actual chip re-initialization sequence is needed to avoid the issue.

---
 drivers/net/ethernet/realtek/r8169.c |  116 ++++++++++++++++++-----------------
 1 file changed, 60 insertions(+), 56 deletions(-)
drivers/net/ethernet/realtek/r8169.c +60 -56
@@ -4452,6 +4452,62 @@ static void rtl_rar_set(struct rtl8169_p
 	rtl_unlock_work(tp);
 }
 
+static void rtl_init_rxcfg(struct rtl8169_private *tp)
+{
+	void __iomem *ioaddr = tp->mmio_addr;
+
+	switch (tp->mac_version) {
+	case RTL_GIGA_MAC_VER_01:
+	case RTL_GIGA_MAC_VER_02:
+	case RTL_GIGA_MAC_VER_03:
+	case RTL_GIGA_MAC_VER_04:
+	case RTL_GIGA_MAC_VER_05:
+	case RTL_GIGA_MAC_VER_06:
+	case RTL_GIGA_MAC_VER_10:
+	case RTL_GIGA_MAC_VER_11:
+	case RTL_GIGA_MAC_VER_12:
+	case RTL_GIGA_MAC_VER_13:
+	case RTL_GIGA_MAC_VER_14:
+	case RTL_GIGA_MAC_VER_15:
+	case RTL_GIGA_MAC_VER_16:
+	case RTL_GIGA_MAC_VER_17:
+		RTL_W32(RxConfig, RX_FIFO_THRESH | RX_DMA_BURST);
+		break;
+	case RTL_GIGA_MAC_VER_18:
+	case RTL_GIGA_MAC_VER_19:
+	case RTL_GIGA_MAC_VER_20:
+	case RTL_GIGA_MAC_VER_21:
+	case RTL_GIGA_MAC_VER_22:
+	case RTL_GIGA_MAC_VER_23:
+	case RTL_GIGA_MAC_VER_24:
+	case RTL_GIGA_MAC_VER_34:
+	case RTL_GIGA_MAC_VER_35:
+		RTL_W32(RxConfig, RX128_INT_EN | RX_MULTI_EN | RX_DMA_BURST);
+		break;
+	case RTL_GIGA_MAC_VER_40:
+		RTL_W32(RxConfig, RX128_INT_EN | RX_MULTI_EN | RX_DMA_BURST | RX_EARLY_OFF);
+		break;
+	case RTL_GIGA_MAC_VER_41:
+	case RTL_GIGA_MAC_VER_42:
+	case RTL_GIGA_MAC_VER_43:
+	case RTL_GIGA_MAC_VER_44:
+	case RTL_GIGA_MAC_VER_45:
+	case RTL_GIGA_MAC_VER_46:
+	case RTL_GIGA_MAC_VER_47:
+	case RTL_GIGA_MAC_VER_48:
+		RTL_W32(RxConfig, RX128_INT_EN | RX_DMA_BURST | RX_EARLY_OFF);
+		break;
+	case RTL_GIGA_MAC_VER_49:
+	case RTL_GIGA_MAC_VER_50:
+	case RTL_GIGA_MAC_VER_51:
+		RTL_W32(RxConfig, RX128_INT_EN | RX_MULTI_EN | RX_DMA_BURST | RX_EARLY_OFF);
+		break;
+	default:
+		RTL_W32(RxConfig, RX128_INT_EN | RX_DMA_BURST);
+		break;
+	}
+}
+
 static int rtl_set_mac_address(struct net_device *dev, void *p)
 {
 	struct rtl8169_private *tp = netdev_priv(dev);
@@ -4464,6 +4520,10 @@ static int rtl_set_mac_address(struct ne
 
 	rtl_rar_set(tp, dev->dev_addr);
 
+	/* Reportedly at least Asus X453MA truncates packets otherwise */
+	if (tp->mac_version == RTL_GIGA_MAC_VER_37)
+		rtl_init_rxcfg(tp);
+
 	return 0;
 }
 
@@ -4900,62 +4960,6 @@ static void rtl_init_pll_power_ops(struc
 		break;
 	}
 }
-
-static void rtl_init_rxcfg(struct rtl8169_private *tp)
-{
-	void __iomem *ioaddr = tp->mmio_addr;
-
-	switch (tp->mac_version) {
-	case RTL_GIGA_MAC_VER_01:
-	case RTL_GIGA_MAC_VER_02:
-	case RTL_GIGA_MAC_VER_03:
-	case RTL_GIGA_MAC_VER_04:
-	case RTL_GIGA_MAC_VER_05:
-	case RTL_GIGA_MAC_VER_06:
-	case RTL_GIGA_MAC_VER_10:
-	case RTL_GIGA_MAC_VER_11:
-	case RTL_GIGA_MAC_VER_12:
-	case RTL_GIGA_MAC_VER_13:
-	case RTL_GIGA_MAC_VER_14:
-	case RTL_GIGA_MAC_VER_15:
-	case RTL_GIGA_MAC_VER_16:
-	case RTL_GIGA_MAC_VER_17:
-		RTL_W32(RxConfig, RX_FIFO_THRESH | RX_DMA_BURST);
-		break;
-	case RTL_GIGA_MAC_VER_18:
-	case RTL_GIGA_MAC_VER_19:
-	case RTL_GIGA_MAC_VER_20:
-	case RTL_GIGA_MAC_VER_21:
-	case RTL_GIGA_MAC_VER_22:
-	case RTL_GIGA_MAC_VER_23:
-	case RTL_GIGA_MAC_VER_24:
-	case RTL_GIGA_MAC_VER_34:
-	case RTL_GIGA_MAC_VER_35:
-		RTL_W32(RxConfig, RX128_INT_EN | RX_MULTI_EN | RX_DMA_BURST);
-		break;
-	case RTL_GIGA_MAC_VER_40:
-		RTL_W32(RxConfig, RX128_INT_EN | RX_MULTI_EN | RX_DMA_BURST | RX_EARLY_OFF);
-		break;
-	case RTL_GIGA_MAC_VER_41:
-	case RTL_GIGA_MAC_VER_42:
-	case RTL_GIGA_MAC_VER_43:
-	case RTL_GIGA_MAC_VER_44:
-	case RTL_GIGA_MAC_VER_45:
-	case RTL_GIGA_MAC_VER_46:
-	case RTL_GIGA_MAC_VER_47:
-	case RTL_GIGA_MAC_VER_48:
-		RTL_W32(RxConfig, RX128_INT_EN | RX_DMA_BURST | RX_EARLY_OFF);
-		break;
-	case RTL_GIGA_MAC_VER_49:
-	case RTL_GIGA_MAC_VER_50:
-	case RTL_GIGA_MAC_VER_51:
-		RTL_W32(RxConfig, RX128_INT_EN | RX_MULTI_EN | RX_DMA_BURST | RX_EARLY_OFF);
-		break;
-	default:
-		RTL_W32(RxConfig, RX128_INT_EN | RX_DMA_BURST);
-		break;
-	}
-}
 
 static void rtl8169_init_ring_indexes(struct rtl8169_private *tp)
 {
author maintainer
#5 lore raw

PATCH 5/112 ALSA: bebob: potential info leak in hwdep_read()

In reply to Greg Kroah-Hartman

From: Dan Carpenter <[email protected]>

commit b41c15f4e1c1f1657da15c482fa837c1b7384452 upstream.

The "count" variable needs to be capped on every path so that we don't copy too much information to the user.

---
 sound/firewire/bebob/bebob_hwdep.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
sound/firewire/bebob/bebob_hwdep.c +1 -2
@@ -37,12 +37,11 @@ hwdep_read(struct snd_hwdep *hwdep, char
 	}
 
 	memset(&event, 0, sizeof(event));
+	count = min_t(long, count, sizeof(event.lock_status));
 	if (bebob->dev_lock_changed) {
 		event.lock_status.type = SNDRV_FIREWIRE_EVENT_LOCK_STATUS;
 		event.lock_status.status = (bebob->dev_lock_count > 0);
 		bebob->dev_lock_changed = false;
-
-		count = min_t(long, count, sizeof(event.lock_status));
 	}
 
 	spin_unlock_irq(&bebob->lock);
author maintainer
#6 lore raw

PATCH 6/112 mm/kasan: print name of mem[set,cpy,move]() caller in report

In reply to Greg Kroah-Hartman

From: Andrey Ryabinin <[email protected]>

commit 936bb4bbbb832f81055328b84e5afe1fc7246a8d upstream.

When bogus memory access happens in mem[set,cpy,move]() it's usually caller's fault. So don't blame mem[set,cpy,move]() in bug report, blame the caller instead.

Before:

  BUG: KASAN: out-of-bounds access in memset+0x23/0x40 at <address>
After:
  BUG: KASAN: out-of-bounds access in <memset_caller> at <address>
---
 mm/kasan/kasan.c |   64 +++++++++++++++++++++++++++++--------------------------
 1 file changed, 34 insertions(+), 30 deletions(-)
mm/kasan/kasan.c +34 -30
@@ -252,32 +252,36 @@ static __always_inline bool memory_is_po
 	return memory_is_poisoned_n(addr, size);
 }
 
-
-static __always_inline void check_memory_region(unsigned long addr,
-						size_t size, bool write)
+static __always_inline void check_memory_region_inline(unsigned long addr,
+						size_t size, bool write,
+						unsigned long ret_ip)
 {
 	if (unlikely(size == 0))
 		return;
 
 	if (unlikely((void *)addr <
 		kasan_shadow_to_mem((void *)KASAN_SHADOW_START))) {
-		kasan_report(addr, size, write, _RET_IP_);
+		kasan_report(addr, size, write, ret_ip);
 		return;
 	}
 
 	if (likely(!memory_is_poisoned(addr, size)))
 		return;
 
-	kasan_report(addr, size, write, _RET_IP_);
+	kasan_report(addr, size, write, ret_ip);
 }
 
-void __asan_loadN(unsigned long addr, size_t size);
-void __asan_storeN(unsigned long addr, size_t size);
+static void check_memory_region(unsigned long addr,
+				size_t size, bool write,
+				unsigned long ret_ip)
+{
+	check_memory_region_inline(addr, size, write, ret_ip);
+}
 
 #undef memset
 void *memset(void *addr, int c, size_t len)
 {
-	__asan_storeN((unsigned long)addr, len);
+	check_memory_region((unsigned long)addr, len, true, _RET_IP_);
 
 	return __memset(addr, c, len);
 }
@@ -285,8 +289,8 @@ void *memset(void *addr, int c, size_t l
 #undef memmove
 void *memmove(void *dest, const void *src, size_t len)
 {
-	__asan_loadN((unsigned long)src, len);
-	__asan_storeN((unsigned long)dest, len);
+	check_memory_region((unsigned long)src, len, false, _RET_IP_);
+	check_memory_region((unsigned long)dest, len, true, _RET_IP_);
 
 	return __memmove(dest, src, len);
 }
@@ -294,8 +298,8 @@ void *memmove(void *dest, const void *sr
 #undef memcpy
 void *memcpy(void *dest, const void *src, size_t len)
 {
-	__asan_loadN((unsigned long)src, len);
-	__asan_storeN((unsigned long)dest, len);
+	check_memory_region((unsigned long)src, len, false, _RET_IP_);
+	check_memory_region((unsigned long)dest, len, true, _RET_IP_);
 
 	return __memcpy(dest, src, len);
 }
@@ -484,22 +488,22 @@ void __asan_unregister_globals(struct ka
 }
 EXPORT_SYMBOL(__asan_unregister_globals);
 
-#define DEFINE_ASAN_LOAD_STORE(size)				\
-	void __asan_load##size(unsigned long addr)		\
-	{							\
-		check_memory_region(addr, size, false);		\
-	}							\
-	EXPORT_SYMBOL(__asan_load##size);			\
-	__alias(__asan_load##size)				\
-	void __asan_load##size##_noabort(unsigned long);	\
-	EXPORT_SYMBOL(__asan_load##size##_noabort);		\
-	void __asan_store##size(unsigned long addr)		\
-	{							\
-		check_memory_region(addr, size, true);		\
-	}							\
-	EXPORT_SYMBOL(__asan_store##size);			\
-	__alias(__asan_store##size)				\
-	void __asan_store##size##_noabort(unsigned long);	\
+#define DEFINE_ASAN_LOAD_STORE(size)					\
+	void __asan_load##size(unsigned long addr)			\
+	{								\
+		check_memory_region_inline(addr, size, false, _RET_IP_);\
+	}								\
+	EXPORT_SYMBOL(__asan_load##size);				\
+	__alias(__asan_load##size)					\
+	void __asan_load##size##_noabort(unsigned long);		\
+	EXPORT_SYMBOL(__asan_load##size##_noabort);			\
+	void __asan_store##size(unsigned long addr)			\
+	{								\
+		check_memory_region_inline(addr, size, true, _RET_IP_);	\
+	}								\
+	EXPORT_SYMBOL(__asan_store##size);				\
+	__alias(__asan_store##size)					\
+	void __asan_store##size##_noabort(unsigned long);		\
 	EXPORT_SYMBOL(__asan_store##size##_noabort)
 
 DEFINE_ASAN_LOAD_STORE(1);
@@ -510,7 +514,7 @@ DEFINE_ASAN_LOAD_STORE(16);
 
 void __asan_loadN(unsigned long addr, size_t size)
 {
-	check_memory_region(addr, size, false);
+	check_memory_region(addr, size, false, _RET_IP_);
 }
 EXPORT_SYMBOL(__asan_loadN);
 
@@ -520,7 +524,7 @@ EXPORT_SYMBOL(__asan_loadN_noabort);
 
 void __asan_storeN(unsigned long addr, size_t size)
 {
-	check_memory_region(addr, size, true);
+	check_memory_region(addr, size, true, _RET_IP_);
 }
 EXPORT_SYMBOL(__asan_storeN);
 
author maintainer
#7 lore raw

PATCH 7/112 mm/kasan: add API to check memory regions

In reply to Greg Kroah-Hartman

From: Andrey Ryabinin <[email protected]>

commit 64f8ebaf115bcddc4aaa902f981c57ba6506bc42 upstream.

Memory access coded in an assembly won't be seen by KASAN as a compiler can instrument only C code. Add kasan_check_[read,write]() API which is going to be used to check a certain memory range.

---
 include/linux/kasan-checks.h |   12 ++++++++++++
 mm/kasan/kasan.c             |   12 ++++++++++++
 2 files changed, 24 insertions(+)
 create mode 100644 include/linux/kasan-checks.h
include/linux/kasan-checks.h new file +12 -0
@@ -0,0 +1,12 @@
+#ifndef _LINUX_KASAN_CHECKS_H
+#define _LINUX_KASAN_CHECKS_H
+
+#ifdef CONFIG_KASAN
+void kasan_check_read(const void *p, unsigned int size);
+void kasan_check_write(const void *p, unsigned int size);
+#else
+static inline void kasan_check_read(const void *p, unsigned int size) { }
+static inline void kasan_check_write(const void *p, unsigned int size) { }
+#endif
+
+#endif
mm/kasan/kasan.c +12 -0
@@ -278,6 +278,18 @@ static void check_memory_region(unsigned
 	check_memory_region_inline(addr, size, write, ret_ip);
 }
 
+void kasan_check_read(const void *p, unsigned int size)
+{
+	check_memory_region((unsigned long)p, size, false, _RET_IP_);
+}
+EXPORT_SYMBOL(kasan_check_read);
+
+void kasan_check_write(const void *p, unsigned int size)
+{
+	check_memory_region((unsigned long)p, size, true, _RET_IP_);
+}
+EXPORT_SYMBOL(kasan_check_write);
+
 #undef memset
 void *memset(void *addr, int c, size_t len)
 {
author maintainer
#8 lore raw

PATCH 8/112 compiler.h, kasan: Avoid duplicating __read_once_size_nocheck()

In reply to Greg Kroah-Hartman

From: Andrey Ryabinin <[email protected]>

commit bdb5ac801af3d81d36732c2f640d6a1d3df83826 upstream.

Instead of having two identical __read_once_size_nocheck() functions with different attributes, consolidate all the difference in new macro __no_kasan_or_inline and use it. No functional changes.

---
 include/linux/compiler.h |   14 ++++++--------
 1 file changed, 6 insertions(+), 8 deletions(-)
include/linux/compiler.h +6 -8
@@ -241,23 +241,21 @@ void __read_once_size(const volatile voi
 
 #ifdef CONFIG_KASAN
 /*
- * This function is not 'inline' because __no_sanitize_address confilcts
+ * We can't declare function 'inline' because __no_sanitize_address confilcts
  * with inlining. Attempt to inline it may cause a build failure.
  * 	https://gcc.gnu.org/bugzilla/show_bug.cgi?id=67368
  * '__maybe_unused' allows us to avoid defined-but-not-used warnings.
  */
-static __no_sanitize_address __maybe_unused
-void __read_once_size_nocheck(const volatile void *p, void *res, int size)
-{
-	__READ_ONCE_SIZE;
-}
+# define __no_kasan_or_inline __no_sanitize_address __maybe_unused
 #else
-static __always_inline
+# define __no_kasan_or_inline __always_inline
+#endif
+
+static __no_kasan_or_inline
 void __read_once_size_nocheck(const volatile void *p, void *res, int size)
 {
 	__READ_ONCE_SIZE;
 }
-#endif
 
 static __always_inline void __write_once_size(volatile void *p, void *res, int size)
 {
author maintainer
#9 lore raw

PATCH 9/112 compiler.h: Add read_word_at_a_time() function.

In reply to Greg Kroah-Hartman

From: Andrey Ryabinin <[email protected]>

commit 7f1e541fc8d57a143dd5df1d0a1276046e08c083 upstream.

Sometimes we know that it's safe to do potentially out-of-bounds access because we know it won't cross a page boundary. Still, KASAN will report this as a bug.

Add read_word_at_a_time() function which is supposed to be used in such cases. In read_word_at_a_time() KASAN performs relaxed check - only the first byte of access is validated.

[bwh: Backported to 4.4: adjust context]
---
 include/linux/compiler.h |    8 ++++++++
 1 file changed, 8 insertions(+)
include/linux/compiler.h +8 -0
@@ -292,6 +292,7 @@ static __always_inline void __write_once
  * with an explicit memory barrier or atomic instruction that provides the
  * required ordering.
  */
+#include <linux/kasan-checks.h>
 
 #define __READ_ONCE(x, check)						\
 ({									\
@@ -310,6 +311,13 @@ static __always_inline void __write_once
  */
 #define READ_ONCE_NOCHECK(x) __READ_ONCE(x, 0)
 
+static __no_kasan_or_inline
+unsigned long read_word_at_a_time(const void *addr)
+{
+	kasan_check_read(addr, 1);
+	return *(unsigned long *)addr;
+}
+
 #define WRITE_ONCE(x, val) \
 ({							\
 	union { typeof(x) __val; char __c[1]; } __u =	\
author maintainer
#10 lore raw

PATCH 10/112 lib/strscpy: Shut up KASAN false-positives in strscpy()

In reply to Greg Kroah-Hartman

From: Andrey Ryabinin <[email protected]>

commit 1a3241ff10d038ecd096d03380327f2a0b5840a6 upstream.

strscpy() performs the word-at-a-time optimistic reads. So it may may access the memory past the end of the object, which is perfectly fine since strscpy() doesn't use that (past-the-end) data and makes sure the optimistic read won't cross a page boundary.

Use new read_word_at_a_time() to shut up the KASAN.

Note that this potentially could hide some bugs. In example bellow, stscpy() will copy more than we should (1-3 extra uninitialized bytes):

        char dst[8];
        char *src;

        src = kmalloc(5, GFP_KERNEL);
        memset(src, 0xff, 5);
        strscpy(dst, src, 8);
---
 lib/string.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
lib/string.c +1 -1
@@ -202,7 +202,7 @@ ssize_t strscpy(char *dest, const char *
 	while (max >= sizeof(unsigned long)) {
 		unsigned long c, data;
 
-		c = *(unsigned long *)(src+res);
+		c = read_word_at_a_time(src+res);
 		if (has_zero(c, &data, &constants)) {
 			data = prep_zero_mask(c, data, &constants);
 			data = create_zero_mask(data);
author maintainer
#11 lore raw

PATCH 11/112 x86/mm/ptdump: Fix soft lockup in page table walker

In reply to Greg Kroah-Hartman

From: Andrey Ryabinin <[email protected]>

commit 146fbb766934dc003fcbf755b519acef683576bf upstream.

CONFIG_KASAN=y needs a lot of virtual memory mapped for its shadow. In that case ptdump_walk_pgd_level_core() takes a lot of time to walk across all page tables and doing this without
a rescheduling causes soft lockups:

NMI watchdog: BUG: soft lockup - CPU#3 stuck for 23s! [swapper/0:1]
...

 Call Trace:
  ptdump_walk_pgd_level_core+0x40c/0x550
  ptdump_walk_pgd_level_checkwx+0x17/0x20
  mark_rodata_ro+0x13b/0x150
  kernel_init+0x2f/0x120
  ret_from_fork+0x2c/0x40

I guess that this issue might arise even without KASAN on huge machines with several terabytes of RAM.

Stick cond_resched() in pgd loop to fix this.

---
 arch/x86/mm/dump_pagetables.c |    2 ++
 1 file changed, 2 insertions(+)
arch/x86/mm/dump_pagetables.c +2 -0
@@ -15,6 +15,7 @@
 #include <linux/debugfs.h>
 #include <linux/mm.h>
 #include <linux/module.h>
+#include <linux/sched.h>
 #include <linux/seq_file.h>
 
 #include <asm/pgtable.h>
@@ -407,6 +408,7 @@ static void ptdump_walk_pgd_level_core(s
 		} else
 			note_page(m, &st, __pgprot(0), 1);
 
+		cond_resched();
 		start++;
 	}
 
author maintainer
#12 lore raw

PATCH 12/112 net: hdlc: In hdlc_rcv, check to make sure dev is an HDLC device

In reply to Greg Kroah-Hartman

From: Xie He <[email protected]>

[ Upstream commit 01c4ceae0a38a0bdbfea6896f41efcd985a9c064 ]

The hdlc_rcv function is used as hdlc_packet_type.func to process any skb received in the kernel with skb->protocol == htons(ETH_P_HDLC). The purpose of this function is to provide second-stage processing for skbs not assigned a "real" L3 skb->protocol value in the first stage.

This function assumes the device from which the skb is received is an HDLC device (a device created by this module). It assumes that netdev_priv(dev) returns a pointer to "struct hdlc_device".

However, it is possible that some driver in the kernel (not necessarily in our control) submits a received skb with skb->protocol == htons(ETH_P_HDLC), from a non-HDLC device. In this case, the skb would still be received by hdlc_rcv. This will cause problems.

hdlc_rcv should be able to recognize and drop invalid skbs. It should first make sure "dev" is actually an HDLC device, before starting its processing. This patch adds this check to hdlc_rcv.

---
 drivers/net/wan/hdlc.c |   10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)
drivers/net/wan/hdlc.c +9 -1
@@ -57,7 +57,15 @@ int hdlc_change_mtu(struct net_device *d
 static int hdlc_rcv(struct sk_buff *skb, struct net_device *dev,
 		    struct packet_type *p, struct net_device *orig_dev)
 {
-	struct hdlc_device *hdlc = dev_to_hdlc(dev);
+	struct hdlc_device *hdlc;
+
+	/* First make sure "dev" is an HDLC device */
+	if (!(dev->priv_flags & IFF_WAN_HDLC)) {
+		kfree_skb(skb);
+		return NET_RX_SUCCESS;
+	}
+
+	hdlc = dev_to_hdlc(dev);
 
 	if (!net_eq(dev_net(dev), &init_net)) {
 		kfree_skb(skb);
author maintainer
#13 lore raw

PATCH 13/112 net: hdlc_raw_eth: Clear the IFF_TX_SKB_SHARING flag after calling ether_setup

In reply to Greg Kroah-Hartman

From: Xie He <[email protected]>

[ Upstream commit 5fce1e43e2d5bf2f7e3224d7b99b1c65ab2c26e2 ]

This driver calls ether_setup to set up the network device. The ether_setup function would add the IFF_TX_SKB_SHARING flag to the device. This flag indicates that it is safe to transmit shared skbs to the device.

However, this is not true. This driver may pad the frame (in eth_tx) before transmission, so the skb may be modified.

Fixes 550fd08c2ceb ("net: Audit drivers to identify those needing IFF_TX_SKB_SHARING cleared")
Cc Neil Horman <[email protected]>
Cc Krzysztof Halasa <[email protected]>
---
 drivers/net/wan/hdlc_raw_eth.c |    1 +
 1 file changed, 1 insertion(+)
drivers/net/wan/hdlc_raw_eth.c +1 -0
@@ -101,6 +101,7 @@ static int raw_eth_ioctl(struct net_devi
 		old_qlen = dev->tx_queue_len;
 		ether_setup(dev);
 		dev->tx_queue_len = old_qlen;
+		dev->priv_flags &= ~IFF_TX_SKB_SHARING;
 		eth_hw_addr_random(dev);
 		netif_dormant_off(dev);
 		return 0;
author maintainer
#14 lore raw

PATCH 14/112 nfc: Ensure presence of NFC_ATTR_FIRMWARE_NAME attribute in nfc_genl_fw_download()

In reply to Greg Kroah-Hartman

From: Defang Bo <[email protected]>

[ Upstream commit 280e3ebdafb863b3cb50d5842f056267e15bf40c ]

Check that the NFC_ATTR_FIRMWARE_NAME attributes are provided by the netlink client prior to accessing them.This prevents potential unhandled NULL pointer dereference exceptions which can be triggered by malicious user-mode programs, if they omit one or both of these attributes.

Similar to commit a0323b979f81 ("nfc: Ensure presence of required attributes in the activate_target handler").

Fixes 9674da8759df ("NFC: Add firmware upload netlink command")
---
 net/nfc/netlink.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
net/nfc/netlink.c +1 -1
@@ -1190,7 +1190,7 @@ static int nfc_genl_fw_download(struct s
 	u32 idx;
 	char firmware_name[NFC_FIRMWARE_NAME_MAXSIZE + 1];
 
-	if (!info->attrs[NFC_ATTR_DEVICE_INDEX])
+	if (!info->attrs[NFC_ATTR_DEVICE_INDEX] || !info->attrs[NFC_ATTR_FIRMWARE_NAME])
 		return -EINVAL;
 
 	idx = nla_get_u32(info->attrs[NFC_ATTR_DEVICE_INDEX]);
author maintainer
#15 lore raw

PATCH 15/112 tcp: fix to update snd_wl1 in bulk receiver fast path

In reply to Greg Kroah-Hartman

From: Neal Cardwell <[email protected]>

[ Upstream commit 18ded910b589839e38a51623a179837ab4cc3789 ]

In the header prediction fast path for a bulk data receiver, if no data is newly acknowledged then we do not call tcp_ack() and do not call tcp_ack_update_window(). This means that a bulk receiver that receives large amounts of data can have the incoming sequence numbers wrap, so that the check in tcp_may_update_window fails:
after(ack_seq, tp->snd_wl1)

If the incoming receive windows are zero in this state, and then the connection that was a bulk data receiver later wants to send data, that connection can find itself persistently rejecting the window updates in incoming ACKs. This means the connection can persistently fail to discover that the receive window has opened, which in turn means that the connection is unable to send anything, and the connection's sending process can get permanently "stuck".

The fix is to update snd_wl1 in the header prediction fast path for a bulk data receiver, so that it keeps up and does not see wrapping problems.

This fix is based on a very nice and thorough analysis and diagnosis by Apollon Oikonomopoulos (see link below).

This is a stable candidate but there is no Fixes tag here since the bug predates current git history. Just for fun: looks like the bug dates back to when header prediction was added in Linux v2.1.8 in Nov 1996. In that version tcp_rcv_established() was added, and the code only updates snd_wl1 in tcp_ack(), and in the new "Bulk data transfer:
receiver" code path it does not call tcp_ack(). This fix seems to apply cleanly at least as far back as v3.2.

---
 net/ipv4/tcp_input.c |    2 ++
 1 file changed, 2 insertions(+)
net/ipv4/tcp_input.c +2 -0
@@ -5531,6 +5531,8 @@ void tcp_rcv_established(struct sock *sk
 				tcp_data_snd_check(sk);
 				if (!inet_csk_ack_scheduled(sk))
 					goto no_ack;
+			} else {
+				tcp_update_wl(tp, TCP_SKB_CB(skb)->seq);
 			}
 
 			__tcp_ack_snd_check(sk, 0);
author maintainer
#16 lore raw

PATCH 16/112 icmp: randomize the global rate limiter

In reply to Greg Kroah-Hartman

From: Eric Dumazet <[email protected]>

[ Upstream commit b38e7819cae946e2edf869e604af1e65a5d241c5 ]

Keyu Man reported that the ICMP rate limiter could be used by attackers to get useful signal. Details will be provided in an upcoming academic publication.

Our solution is to add some noise, so that the attackers no longer can get help from the predictable token bucket limiter.

Fixes 4cdf507d5452 ("icmp: add a global rate limitation")
---
 Documentation/networking/ip-sysctl.txt |    4 +++-
 net/ipv4/icmp.c                        |    7 +++++--
 2 files changed, 8 insertions(+), 3 deletions(-)
Documentation/networking/ip-sysctl.txt +3 -1
@@ -868,12 +868,14 @@ icmp_ratelimit - INTEGER
 icmp_msgs_per_sec - INTEGER
 	Limit maximal number of ICMP packets sent per second from this host.
 	Only messages whose type matches icmp_ratemask (see below) are
-	controlled by this limit.
+	controlled by this limit. For security reasons, the precise count
+	of messages per second is randomized.
 	Default: 1000
 
 icmp_msgs_burst - INTEGER
 	icmp_msgs_per_sec controls number of ICMP packets sent per second,
 	while icmp_msgs_burst controls the burst size of these packets.
+	For security reasons, the precise burst size is randomized.
 	Default: 50
 
 icmp_ratemask - INTEGER
net/ipv4/icmp.c +5 -2
@@ -246,7 +246,7 @@ static struct {
 /**
  * icmp_global_allow - Are we allowed to send one more ICMP message ?
  *
- * Uses a token bucket to limit our ICMP messages to sysctl_icmp_msgs_per_sec.
+ * Uses a token bucket to limit our ICMP messages to ~sysctl_icmp_msgs_per_sec.
  * Returns false if we reached the limit and can not send another packet.
  * Note: called with BH disabled
  */
@@ -274,7 +274,10 @@ bool icmp_global_allow(void)
 	}
 	credit = min_t(u32, icmp_global.credit + incr, sysctl_icmp_msgs_burst);
 	if (credit) {
-		credit--;
+		/* We want to use a credit of one in average, but need to randomize
+		 * it for security reasons.
+		 */
+		credit = max_t(int, credit - prandom_u32_max(3), 0);
 		rc = true;
 	}
 	WRITE_ONCE(icmp_global.credit, credit);
author maintainer
#17 lore raw

PATCH 17/112 cifs: remove bogus debug code

In reply to Greg Kroah-Hartman

From: Dan Carpenter <[email protected]>

commit d367cb960ce88914898cbfa43645c2e43ede9465 upstream.

The "end" pointer is either NULL or it points to the next byte to parse. If there isn't a next byte then dereferencing "end" is an off-by-one out of bounds error. And, of course, if it's NULL that leads to an Oops. Printing "*end" doesn't seem very useful so let's delete this code.

Also for the last debug statement, I noticed that it should be printing "sequence_end" instead of "end" so fix that as well.

---
 fs/cifs/asn1.c |   16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)
fs/cifs/asn1.c +8 -8
@@ -541,8 +541,8 @@ decode_negTokenInit(unsigned char *secur
 		return 0;
 	} else if ((cls != ASN1_CTX) || (con != ASN1_CON)
 		   || (tag != ASN1_EOC)) {
-		cifs_dbg(FYI, "cls = %d con = %d tag = %d end = %p (%d) exit 0\n",
-			 cls, con, tag, end, *end);
+		cifs_dbg(FYI, "cls = %d con = %d tag = %d end = %p exit 0\n",
+			 cls, con, tag, end);
 		return 0;
 	}
 
@@ -552,8 +552,8 @@ decode_negTokenInit(unsigned char *secur
 		return 0;
 	} else if ((cls != ASN1_UNI) || (con != ASN1_CON)
 		   || (tag != ASN1_SEQ)) {
-		cifs_dbg(FYI, "cls = %d con = %d tag = %d end = %p (%d) exit 1\n",
-			 cls, con, tag, end, *end);
+		cifs_dbg(FYI, "cls = %d con = %d tag = %d end = %p exit 1\n",
+			 cls, con, tag, end);
 		return 0;
 	}
 
@@ -563,8 +563,8 @@ decode_negTokenInit(unsigned char *secur
 		return 0;
 	} else if ((cls != ASN1_CTX) || (con != ASN1_CON)
 		   || (tag != ASN1_EOC)) {
-		cifs_dbg(FYI, "cls = %d con = %d tag = %d end = %p (%d) exit 0\n",
-			 cls, con, tag, end, *end);
+		cifs_dbg(FYI, "cls = %d con = %d tag = %d end = %p exit 0\n",
+			 cls, con, tag, end);
 		return 0;
 	}
 
@@ -575,8 +575,8 @@ decode_negTokenInit(unsigned char *secur
 		return 0;
 	} else if ((cls != ASN1_UNI) || (con != ASN1_CON)
 		   || (tag != ASN1_SEQ)) {
-		cifs_dbg(FYI, "cls = %d con = %d tag = %d end = %p (%d) exit 1\n",
-			 cls, con, tag, end, *end);
+		cifs_dbg(FYI, "cls = %d con = %d tag = %d sequence_end = %p exit 1\n",
+			 cls, con, tag, sequence_end);
 		return 0;
 	}
 
author maintainer
#18 lore raw

PATCH 18/112 ima: Dont ignore errors from crypto_shash_update()

In reply to Greg Kroah-Hartman

From: Roberto Sassu <[email protected]>

commit 60386b854008adc951c470067f90a2d85b5d520f upstream.

Errors returned by crypto_shash_update() are not checked in ima_calc_boot_aggregate_tfm() and thus can be overwritten at the next iteration of the loop. This patch adds a check after calling crypto_shash_update() and returns immediately if the result is not zero.

Fixes 3323eec921efd ("integrity: IMA as an integrity service provider")
---
 security/integrity/ima/ima_crypto.c |    2 ++
 1 file changed, 2 insertions(+)
security/integrity/ima/ima_crypto.c +2 -0
@@ -555,6 +555,8 @@ static int __init ima_calc_boot_aggregat
 		ima_pcrread(i, pcr_i);
 		/* now accumulate with current aggregate */
 		rc = crypto_shash_update(shash, pcr_i, TPM_DIGEST_SIZE);
+		if (rc != 0)
+			return rc;
 	}
 	if (!rc)
 		crypto_shash_final(shash, digest);
author maintainer
#19 lore raw

PATCH 19/112 EDAC/i5100: Fix error handling order in i5100_init_one()

In reply to Greg Kroah-Hartman

From: Dinghao Liu <[email protected]>

[ Upstream commit 857a3139bd8be4f702c030c8ca06f3fd69c1741a ]

When pci_get_device_func() fails, the driver doesn't need to execute pci_dev_put(). mci should still be freed, though, to prevent a memory leak. When pci_enable_device() fails, the error injection PCI device "einj" doesn't need to be disabled either.

[ bp: Massage commit message, rename label to "bail_mc_free". ]

Fixes 52608ba205461 ("i5100_edac: probe for device 19 function 0")
---
 drivers/edac/i5100_edac.c | 11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)
drivers/edac/i5100_edac.c +5 -6
index 40917775dca1c..59d10f48ed6ab 100644
@@ -1075,16 +1075,15 @@ static int i5100_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 				    PCI_DEVICE_ID_INTEL_5100_19, 0);
 	if (!einj) {
 		ret = -ENODEV;
-		goto bail_einj;
+		goto bail_mc_free;
 	}
 
 	rc = pci_enable_device(einj);
 	if (rc < 0) {
 		ret = rc;
-		goto bail_disable_einj;
+		goto bail_einj;
 	}
 
-
 	mci->pdev = &pdev->dev;
 
 	priv = mci->pvt_info;
@@ -1151,14 +1150,14 @@ static int i5100_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 bail_scrub:
 	priv->scrub_enable = 0;
 	cancel_delayed_work_sync(&(priv->i5100_scrubbing));
-	edac_mc_free(mci);
-
-bail_disable_einj:
 	pci_disable_device(einj);
 
 bail_einj:
 	pci_dev_put(einj);
 
+bail_mc_free:
+	edac_mc_free(mci);
+
 bail_disable_ch1:
 	pci_disable_device(ch1mm);
 
Signature · 1 line
2.25.1
author maintainer
#20 lore raw

PATCH 20/112 crypto: ixp4xx - Fix the size used in a dma_free_coherent() call

In reply to Greg Kroah-Hartman

From: Christophe JAILLET <[email protected]>

[ Upstream commit f7ade9aaf66bd5599690acf0597df2c0f6cd825a ]

Update the size used in 'dma_free_coherent()' in order to match the one used in the corresponding 'dma_alloc_coherent()', in 'setup_crypt_desc()'.

Fixes 81bef0150074 ("crypto: ixp4xx - Hardware crypto support for IXP4xx CPUs")
---
 drivers/crypto/ixp4xx_crypto.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/crypto/ixp4xx_crypto.c +1 -1
index 8f27903532812..13657105cfb93 100644
@@ -533,7 +533,7 @@ static void release_ixp_crypto(struct device *dev)
 
 	if (crypt_virt) {
 		dma_free_coherent(dev,
-			NPE_QLEN_TOTAL * sizeof( struct crypt_ctl),
+			NPE_QLEN * sizeof(struct crypt_ctl),
 			crypt_virt, crypt_phys);
 	}
 	return;
Signature · 1 line
2.25.1
author maintainer
#21 lore raw

PATCH 21/112 media: Revert "media: exynos4-is: Add missed check for pinctrl_lookup_state()"

In reply to Greg Kroah-Hartman

From: Sylwester Nawrocki <[email protected]>

[ Upstream commit 00d21f325d58567d81d9172096692d0a9ea7f725 ]

The "idle" pinctrl state is optional as documented in the DT binding. The change introduced by the commit being reverted makes that pinctrl state mandatory and breaks initialization of the whole media driver, since the "idle" state is not specified in any mainline dts.

This reverts commit 18ffec750578 ("media: exynos4-is: Add missed check for pinctrl_lookup_state()") to fix the regression.

Fixes 18ffec750578 ("media: exynos4-is: Add missed check for pinctrl_lookup_state()")
---
 drivers/media/platform/exynos4-is/media-dev.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)
drivers/media/platform/exynos4-is/media-dev.c +1 -3
index 31cc7d94064e3..6bc3c8a2e1443 100644
@@ -1170,11 +1170,9 @@ static int fimc_md_get_pinctrl(struct fimc_md *fmd)
 	if (IS_ERR(pctl->state_default))
 		return PTR_ERR(pctl->state_default);
 
+	/* PINCTRL_STATE_IDLE is optional */
 	pctl->state_idle = pinctrl_lookup_state(pctl->pinctrl,
 					PINCTRL_STATE_IDLE);
-	if (IS_ERR(pctl->state_idle))
-		return PTR_ERR(pctl->state_idle);
-
 	return 0;
 }
 
Signature · 1 line
2.25.1
author maintainer
#22 lore raw

PATCH 22/112 media: m5mols: Check function pointer in m5mols_sensor_power

In reply to Greg Kroah-Hartman

From: Tom Rix <[email protected]>

[ Upstream commit 52438c4463ac904d14bf3496765e67750766f3a6 ]

clang static analysis reports this error

m5mols_core.c:767:4: warning: Called function pointer
is null (null dereference) [core.CallAndMessage]

    info->set_power(&client->dev, 0);
    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

In other places, the set_power ptr is checked.
So add a check.

Fixes bc125106f8af ("[media] Add support for M-5MOLS 8 Mega Pixel camera ISP")
---
 drivers/media/i2c/m5mols/m5mols_core.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/media/i2c/m5mols/m5mols_core.c +2 -1
index 6404c0d93e7af..514267680dc96 100644
@@ -754,7 +754,8 @@ static int m5mols_sensor_power(struct m5mols_info *info, bool enable)
 
 		ret = regulator_bulk_enable(ARRAY_SIZE(supplies), supplies);
 		if (ret) {
-			info->set_power(&client->dev, 0);
+			if (info->set_power)
+				info->set_power(&client->dev, 0);
 			return ret;
 		}
 
Signature · 1 line
2.25.1
author maintainer
#23 lore raw

PATCH 23/112 media: omap3isp: Fix memleak in isp_probe

In reply to Greg Kroah-Hartman

From: Dinghao Liu <[email protected]>

[ Upstream commit d8fc21c17099635e8ebd986d042be65a6c6b5bd0 ]

When devm_ioremap_resource() fails, isp should be
freed just like other error paths in isp_probe.

Fixes 8644cdf972dd6 ("[media] omap3isp: Replace many MMIO regions by two")
---
 drivers/media/platform/omap3isp/isp.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
drivers/media/platform/omap3isp/isp.c +4 -2
index f41e0d08de93e..4c6842202e47c 100644
@@ -2388,8 +2388,10 @@ static int isp_probe(struct platform_device *pdev)
 		mem = platform_get_resource(pdev, IORESOURCE_MEM, i);
 		isp->mmio_base[map_idx] =
 			devm_ioremap_resource(isp->dev, mem);
-		if (IS_ERR(isp->mmio_base[map_idx]))
-			return PTR_ERR(isp->mmio_base[map_idx]);
+		if (IS_ERR(isp->mmio_base[map_idx])) {
+			ret = PTR_ERR(isp->mmio_base[map_idx]);
+			goto error;
+		}
 	}
 
 	ret = isp_get_clocks(isp);
Signature · 1 line
2.25.1
author maintainer
#24 lore raw

PATCH 24/112 crypto: omap-sham - fix digcnt register handling with export/import

In reply to Greg Kroah-Hartman

From: Tero Kristo <[email protected]>

[ Upstream commit 3faf757bad75f3fc1b2736f0431e295a073a7423 ]

Running export/import for hashes in peculiar order (mostly done by openssl) can mess up the internal book keeping of the OMAP SHA core. Fix by forcibly writing the correct DIGCNT back to hardware. This issue was noticed while transitioning to openssl 1.1 support.

Fixes 0d373d603202 ("crypto: omap-sham - Add OMAP4/AM33XX SHAM Support")
---
 drivers/crypto/omap-sham.c | 3 +++
 1 file changed, 3 insertions(+)
drivers/crypto/omap-sham.c +3 -0
index 48adb2a0903e5..7e9a44cee4250 100644
@@ -453,6 +453,9 @@ static void omap_sham_write_ctrl_omap4(struct omap_sham_dev *dd, size_t length,
 	struct omap_sham_reqctx *ctx = ahash_request_ctx(dd->req);
 	u32 val, mask;
 
+	if (likely(ctx->digcnt))
+		omap_sham_write(dd, SHA_REG_DIGCNT(dd), ctx->digcnt);
+
 	/*
 	 * Setting ALGO_CONST only for the first iteration and
 	 * CLOSE_HASH only for the last one. Note that flags mode bits
Signature · 1 line
2.25.1
author maintainer
#25 lore raw

PATCH 25/112 media: tc358743: initialize variable

In reply to Greg Kroah-Hartman

From: Tom Rix <[email protected]>

[ Upstream commit 274cf92d5dff5c2fec1a518078542ffe70d07646 ]

clang static analysis flags this error

tc358743.c:1468:9: warning: Branch condition evaluates
to a garbage value

        return handled ? IRQ_HANDLED : IRQ_NONE;
               ^~~~~~~

handled should be initialized to false.

Fixes d747b806abf4 ("[media] tc358743: add direct interrupt handling")
---
 drivers/media/i2c/tc358743.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/media/i2c/tc358743.c +1 -1
index bc630a7197761..1e95fdb61041b 100644
@@ -1325,7 +1325,7 @@ static int tc358743_isr(struct v4l2_subdev *sd, u32 status, bool *handled)
 static irqreturn_t tc358743_irq_handler(int irq, void *dev_id)
 {
 	struct tc358743_state *state = dev_id;
-	bool handled;
+	bool handled = false;
 
 	tc358743_isr(&state->sd, 0, &handled);
 
Signature · 1 line
2.25.1
author maintainer
#26 lore raw

PATCH 26/112 media: ti-vpe: Fix a missing check and reference count leak

In reply to Greg Kroah-Hartman

From: Qiushi Wu <[email protected]>

[ Upstream commit 7dae2aaaf432767ca7aa11fa84643a7c2600dbdd ]

pm_runtime_get_sync() increments the runtime PM usage counter even when it returns an error code, causing incorrect ref count if pm_runtime_put_noidle() is not called in error handling paths. And also, when the call of function vpe_runtime_get() failed, we won't call vpe_runtime_put().
Thus call pm_runtime_put_noidle() if pm_runtime_get_sync() fails inside vpe_runtime_get().

Fixes 4571912743ac ("[media] v4l: ti-vpe: Add VPE mem to mem driver")
---
 drivers/media/platform/ti-vpe/vpe.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/media/platform/ti-vpe/vpe.c +2 -0
index b5f8c425cd2ef..8a3714bfb77e8 100644
@@ -2135,6 +2135,8 @@ static int vpe_runtime_get(struct platform_device *pdev)
 
 	r = pm_runtime_get_sync(&pdev->dev);
 	WARN_ON(r < 0);
+	if (r)
+		pm_runtime_put_noidle(&pdev->dev);
 	return r < 0 ? r : 0;
 }
 
Signature · 1 line
2.25.1
author maintainer
#27 lore raw

PATCH 27/112 ath6kl: prevent potential array overflow in ath6kl_add_new_sta()

In reply to Greg Kroah-Hartman

From: Dan Carpenter <[email protected]>

[ Upstream commit 54f9ab7b870934b70e5a21786d951fbcf663970f ]

The value for "aid" comes from skb->data so Smatch marks it as untrusted. If it's invalid then it can result in an out of bounds array access in ath6kl_add_new_sta().

Fixes 572e27c00c9d ("ath6kl: Fix AP mode connect event parsing and TIM updates")
---
 drivers/net/wireless/ath/ath6kl/main.c | 3 +++
 1 file changed, 3 insertions(+)
drivers/net/wireless/ath/ath6kl/main.c +3 -0
index 1af3fed5a72ca..1a68518279689 100644
@@ -430,6 +430,9 @@ void ath6kl_connect_ap_mode_sta(struct ath6kl_vif *vif, u16 aid, u8 *mac_addr,
 
 	ath6kl_dbg(ATH6KL_DBG_TRC, "new station %pM aid=%d\n", mac_addr, aid);
 
+	if (aid < 1 || aid > AP_MAX_NUM_STA)
+		return;
+
 	if (assoc_req_len > sizeof(struct ieee80211_hdr_3addr)) {
 		struct ieee80211_mgmt *mgmt =
 			(struct ieee80211_mgmt *) assoc_info;
Signature · 1 line
2.25.1
author maintainer
#28 lore raw

PATCH 28/112 ath9k: Fix potential out of bounds in ath9k_htc_txcompletion_cb()

In reply to Greg Kroah-Hartman

From: Dan Carpenter <[email protected]>

[ Upstream commit 2705cd7558e718a7240c64eb0afb2edad5f8c190 ]

The value of "htc_hdr->endpoint_id" comes from skb->data so Smatch marks it as untrusted so we have to check it before using it as an array offset.

This is similar to a bug that syzkaller found in commit e4ff08a4d727 ("ath9k: Fix use-after-free Write in ath9k_htc_rx_msg") so it is probably a real issue.

Fixes fb9987d0f748 ("ath9k_htc: Support for AR9271 chipset.")
---
 drivers/net/wireless/ath/ath9k/htc_hst.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/net/wireless/ath/ath9k/htc_hst.c +2 -0
index 1af216aa5adae..625823e45d8f0 100644
@@ -346,6 +346,8 @@ void ath9k_htc_txcompletion_cb(struct htc_target *htc_handle,
 
 	if (skb) {
 		htc_hdr = (struct htc_frame_hdr *) skb->data;
+		if (htc_hdr->endpoint_id >= ARRAY_SIZE(htc_handle->endpoint))
+			goto ret;
 		endpoint = &htc_handle->endpoint[htc_hdr->endpoint_id];
 		skb_pull(skb, sizeof(struct htc_frame_hdr));
 
Signature · 1 line
2.25.1
author maintainer
#29 lore raw

PATCH 29/112 wcn36xx: Fix reported 802.11n rx_highest rate wcn3660/wcn3680

In reply to Greg Kroah-Hartman

From: Bryan O'Donoghue <[email protected]>

[ Upstream commit 3b9fb6791e7113679b1eb472e6ce1659e80f5797 ]

Qualcomm's document "80-WL007-1 Rev. J" states that the highest rx rate for the WCN3660 and WCN3680 on MCS 7 is 150 Mbps not the 72 Mbps stated here.

This patch fixes the data-rate declared in the 5GHz table.

Fixes 8e84c2582169 ("wcn36xx: mac80211 driver for Qualcomm WCN3660/WCN3680

hardware")

---
 drivers/net/wireless/ath/wcn36xx/main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/wireless/ath/wcn36xx/main.c +1 -1
index a27279c2c6950..274d114962e8a 100644
@@ -156,7 +156,7 @@ static struct ieee80211_supported_band wcn_band_5ghz = {
 		.ampdu_density = IEEE80211_HT_MPDU_DENSITY_16,
 		.mcs = {
 			.rx_mask = { 0xff, 0, 0, 0, 0, 0, 0, 0, 0, 0, },
-			.rx_highest = cpu_to_le16(72),
+			.rx_highest = cpu_to_le16(150),
 			.tx_params = IEEE80211_HT_MCS_TX_DEFINED,
 		}
 	}
Signature · 1 line
2.25.1
author maintainer
#30 lore raw

PATCH 30/112 mwifiex: Do not use GFP_KERNEL in atomic context

In reply to Greg Kroah-Hartman

From: Christophe JAILLET <[email protected]>

[ Upstream commit d2ab7f00f4321370a8ee14e5630d4349fdacc42e ]

A possible call chain is as follow:

  mwifiex_sdio_interrupt                            (sdio.c)
    --> mwifiex_main_process                        (main.c)
      --> mwifiex_process_cmdresp                   (cmdevt.c)
        --> mwifiex_process_sta_cmdresp             (sta_cmdresp.c)
          --> mwifiex_ret_802_11_scan               (scan.c)
            --> mwifiex_parse_single_response_buf   (scan.c)

'mwifiex_sdio_interrupt()' is an interrupt function.

Also note that 'mwifiex_ret_802_11_scan()' already uses GFP_ATOMIC.

So use GFP_ATOMIC instead of GFP_KERNEL when memory is allocated in 'mwifiex_parse_single_response_buf()'.

Fixes 7c6fa2a843c5 ("mwifiex: use cfg80211 dynamic scan table and cfg80211_get_bss API")

or

Fixes 601216e12c65e ("mwifiex: process RX packets in SDIO IRQ thread directly")
---
 drivers/net/wireless/mwifiex/scan.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/wireless/mwifiex/scan.c +1 -1
index e7c8972431d34..e54dd4b7face6 100644
@@ -1862,7 +1862,7 @@ mwifiex_parse_single_response_buf(struct mwifiex_private *priv, u8 **bss_info,
 					    chan, CFG80211_BSS_FTYPE_UNKNOWN,
 					    bssid, timestamp,
 					    cap_info_bitmap, beacon_period,
-					    ie_buf, ie_len, rssi, GFP_KERNEL);
+					    ie_buf, ie_len, rssi, GFP_ATOMIC);
 			if (bss) {
 				bss_priv = (struct mwifiex_bss_priv *)bss->priv;
 				bss_priv->band = band;
Signature · 1 line
2.25.1
author maintainer
#31 lore raw

PATCH 31/112 drm/gma500: fix error check

In reply to Greg Kroah-Hartman

From: Tom Rix <[email protected]>

[ Upstream commit cdd296cdae1af2d27dae3fcfbdf12c5252ab78cf ]

Reviewing this block of code in cdv_intel_dp_init()

ret = cdv_intel_dp_aux_native_read(gma_encoder, DP_DPCD_REV, ...

cdv_intel_edp_panel_vdd_off(gma_encoder);

if (ret == 0) {
	/* if this fails, presume the device is a ghost */
	DRM_INFO("failed to retrieve link info, disabling eDP\n");
	drm_encoder_cleanup(encoder);
	cdv_intel_dp_destroy(connector);
	goto err_priv;
} else {

The (ret == 0) is not strict enough. cdv_intel_dp_aux_native_read() returns > 0 on success otherwise it is failure.

So change to <=

Fixes d112a8163f83 ("gma500/cdv: Add eDP support")
---
 drivers/gpu/drm/gma500/cdv_intel_dp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/gma500/cdv_intel_dp.c +1 -1
index d3de377dc857e..25c68e4dc7a53 100644
@@ -2120,7 +2120,7 @@ cdv_intel_dp_init(struct drm_device *dev, struct psb_intel_mode_device *mode_dev
 					       intel_dp->dpcd,
 					       sizeof(intel_dp->dpcd));
 		cdv_intel_edp_panel_vdd_off(gma_encoder);
-		if (ret == 0) {
+		if (ret <= 0) {
 			/* if this fails, presume the device is a ghost */
 			DRM_INFO("failed to retrieve link info, disabling eDP\n");
 			cdv_intel_dp_encoder_destroy(encoder);
Signature · 1 line
2.25.1
author maintainer
#32 lore raw

PATCH 32/112 scsi: qla4xxx: Fix an error handling path in qla4xxx_get_host_stats()

In reply to Greg Kroah-Hartman

From: Christophe JAILLET <[email protected]>

[ Upstream commit 574918e69720fe62ab3eb42ec3750230c8d16b06 ]

Update the size used in 'dma_free_coherent()' in order to match the one used in the corresponding 'dma_alloc_coherent()'.

Fixes 4161cee52df8 ("[SCSI] qla4xxx: Add host statistics support")
---
 drivers/scsi/qla4xxx/ql4_os.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/scsi/qla4xxx/ql4_os.c +1 -1
index 3fda5836aac69..f10088a1d38c0 100644
@@ -1223,7 +1223,7 @@ static int qla4xxx_get_host_stats(struct Scsi_Host *shost, char *buf, int len)
 			le64_to_cpu(ql_iscsi_stats->iscsi_sequence_error);
 exit_host_stats:
 	if (ql_iscsi_stats)
-		dma_free_coherent(&ha->pdev->dev, host_stats_size,
+		dma_free_coherent(&ha->pdev->dev, stats_size,
 				  ql_iscsi_stats, iscsi_stats_dma);
 
 	ql4_printk(KERN_INFO, ha, "%s: Get host stats done\n",
Signature · 1 line
2.25.1
author maintainer
#33 lore raw

PATCH 33/112 scsi: csiostor: Fix wrong return value in csio_hw_prep_fw()

In reply to Greg Kroah-Hartman

From: Tianjia Zhang <[email protected]>

[ Upstream commit 44f4daf8678ae5f08c93bbe70792f90cd88e4649 ]

On an error exit path, a negative error code should be returned instead of a positive return value.

Fixes f40e74ffa3de ("csiostor:firmware upgrade fix")
Cc Praveen Madhavan <[email protected]>
---
 drivers/scsi/csiostor/csio_hw.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/scsi/csiostor/csio_hw.c +1 -1
index dab195f04da78..06ca0495f3e8e 100644
@@ -1973,7 +1973,7 @@ static int csio_hw_prep_fw(struct csio_hw *hw, struct fw_info *fw_info,
 			FW_HDR_FW_VER_MICRO_G(c), FW_HDR_FW_VER_BUILD_G(c),
 			FW_HDR_FW_VER_MAJOR_G(k), FW_HDR_FW_VER_MINOR_G(k),
 			FW_HDR_FW_VER_MICRO_G(k), FW_HDR_FW_VER_BUILD_G(k));
-		ret = EINVAL;
+		ret = -EINVAL;
 		goto bye;
 	}
 
Signature · 1 line
2.25.1
author maintainer
#34 lore raw

PATCH 34/112 backlight: sky81452-backlight: Fix refcount imbalance on error

In reply to Greg Kroah-Hartman

From: [email protected] <[email protected]>

[ Upstream commit b7a4f80bc316a56d6ec8750e93e66f42431ed960 ]

When of_property_read_u32_array() returns an error code, a pairing refcount decrement is needed to keep np's refcount balanced.

Fixes f705806c9f355 ("backlight: Add support Skyworks SKY81452 backlight driver")
---
 drivers/video/backlight/sky81452-backlight.c | 1 +
 1 file changed, 1 insertion(+)
drivers/video/backlight/sky81452-backlight.c +1 -0
index d414c7a3acf5a..a2f77625b7170 100644
@@ -207,6 +207,7 @@ static struct sky81452_bl_platform_data *sky81452_bl_parse_dt(
 					num_entry);
 		if (ret < 0) {
 			dev_err(dev, "led-sources node is invalid.\n");
+			of_node_put(np);
 			return ERR_PTR(-EINVAL);
 		}
 
Signature · 1 line
2.25.1
author maintainer
#35 lore raw

PATCH 35/112 VMCI: check return value of get_user_pages_fast() for errors

In reply to Greg Kroah-Hartman

From: Alex Dewar <[email protected]>

[ Upstream commit 90ca6333fd65f318c47bff425e1ea36c0a5539f6 ]

In a couple of places in qp_host_get_user_memory(), get_user_pages_fast() is called without properly checking for errors. If e.g. -EFAULT is returned, this negative value will then be passed on to qp_release_pages(), which expects a u64 as input.

Fix this by only calling qp_release_pages() when we have a positive number returned.

Fixes 06164d2b72aa ("VMCI: queue pairs implementation.")
---
 drivers/misc/vmw_vmci/vmci_queue_pair.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)
drivers/misc/vmw_vmci/vmci_queue_pair.c +6 -4
index 3877f534fd3f4..e57340e980c4b 100644
@@ -758,8 +758,9 @@ static int qp_host_get_user_memory(u64 produce_uva,
 	if (retval < (int)produce_q->kernel_if->num_pages) {
 		pr_debug("get_user_pages_fast(produce) failed (retval=%d)",
 			retval);
-		qp_release_pages(produce_q->kernel_if->u.h.header_page,
-				 retval, false);
+		if (retval > 0)
+			qp_release_pages(produce_q->kernel_if->u.h.header_page,
+					retval, false);
 		err = VMCI_ERROR_NO_MEM;
 		goto out;
 	}
@@ -770,8 +771,9 @@ static int qp_host_get_user_memory(u64 produce_uva,
 	if (retval < (int)consume_q->kernel_if->num_pages) {
 		pr_debug("get_user_pages_fast(consume) failed (retval=%d)",
 			retval);
-		qp_release_pages(consume_q->kernel_if->u.h.header_page,
-				 retval, false);
+		if (retval > 0)
+			qp_release_pages(consume_q->kernel_if->u.h.header_page,
+					retval, false);
 		qp_release_pages(produce_q->kernel_if->u.h.header_page,
 				 produce_q->kernel_if->num_pages, false);
 		err = VMCI_ERROR_NO_MEM;
Signature · 1 line
2.25.1
author maintainer
#36 lore raw

PATCH 36/112 tty: serial: earlycon dependency

In reply to Greg Kroah-Hartman

From: Tong Zhang <[email protected]>

[ Upstream commit 0fb9342d06b0f667b915ba58bfefc030e534a218 ]

parse_options() in drivers/tty/serial/earlycon.c calls uart_parse_earlycon in drivers/tty/serial/serial_core.c therefore selecting SERIAL_EARLYCON should automatically select SERIAL_CORE, otherwise will result in symbol not found error during linking if SERIAL_CORE is not configured as builtin

Fixes 9aac5887595b ("tty/serial: add generic serial earlycon")
---
 drivers/tty/serial/Kconfig | 1 +
 1 file changed, 1 insertion(+)
drivers/tty/serial/Kconfig +1 -0
index f38beb28e7ae6..5c3c86d4fe716 100644
@@ -9,6 +9,7 @@ menu "Serial drivers"
 
 config SERIAL_EARLYCON
 	bool
+	depends on SERIAL_CORE
 	help
 	  Support for early consoles with the earlycon parameter. This enables
 	  the console before standard serial driver is probed. The console is
Signature · 1 line
2.25.1
author maintainer
#37 lore raw

PATCH 37/112 tty: hvcs: Dont NULL tty->driver_data until hvcs_cleanup()

In reply to Greg Kroah-Hartman

From: Tyrel Datwyler <[email protected]>

[ Upstream commit 63ffcbdad738e3d1c857027789a2273df3337624 ]

The code currently NULLs tty->driver_data in hvcs_close() with the intent of informing the next call to hvcs_open() that device needs to be reconfigured. However, when hvcs_cleanup() is called we copy hvcsd from tty->driver_data which was previoulsy NULLed by hvcs_close() and our call to tty_port_put(&hvcsd->port) doesn't actually do anything since &hvcsd->port ends up translating to NULL by chance. This has the side effect that when hvcs_remove() is called we have one too many port references preventing hvcs_destuct_port() from ever being called. This also prevents us from reusing the /dev/hvcsX node in a future hvcs_probe() and we can eventually run out of /dev/hvcsX devices.

Fix this by waiting to NULL tty->driver_data in hvcs_cleanup().

---
 drivers/tty/hvc/hvcs.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)
drivers/tty/hvc/hvcs.c +7 -7
index 5997b17311113..cba662c50f919 100644
@@ -1232,13 +1232,6 @@ static void hvcs_close(struct tty_struct *tty, struct file *filp)
 
 		tty_wait_until_sent(tty, HVCS_CLOSE_WAIT);
 
-		/*
-		 * This line is important because it tells hvcs_open that this
-		 * device needs to be re-configured the next time hvcs_open is
-		 * called.
-		 */
-		tty->driver_data = NULL;
-
 		free_irq(irq, hvcsd);
 		return;
 	} else if (hvcsd->port.count < 0) {
@@ -1254,6 +1247,13 @@ static void hvcs_cleanup(struct tty_struct * tty)
 {
 	struct hvcs_struct *hvcsd = tty->driver_data;
 
+	/*
+	 * This line is important because it tells hvcs_open that this
+	 * device needs to be re-configured the next time hvcs_open is
+	 * called.
+	 */
+	tty->driver_data = NULL;
+
 	tty_port_put(&hvcsd->port);
 }
 
Signature · 1 line
2.25.1
author maintainer
#38 lore raw

PATCH 38/112 pty: do tty_flip_buffer_push without port->lock in pty_write

In reply to Greg Kroah-Hartman

From: Artem Savkov <[email protected]>

[ Upstream commit 71a174b39f10b4b93223d374722aa894b5d8a82e ]

b6da31b2c07c "tty: Fix data race in tty_insert_flip_string_fixed_flag" puts tty_flip_buffer_push under port->lock introducing the following possible circular locking dependency:

[30129.876566] ======================================================
[30129.876566] WARNING: possible circular locking dependency detected
[30129.876567] 5.9.0-rc2+ #3 Tainted: G S      W
[30129.876568] ------------------------------------------------------
[30129.876568] sysrq.sh/1222 is trying to acquire lock:
[30129.876569] ffffffff92c39480 (console_owner){....}-{0:0}, at: console_unlock+0x3fe/0xa90
[30129.876572] but task is already holding lock:
[30129.876572] ffff888107cb9018 (&pool->lock/1){-.-.}-{2:2}, at: show_workqueue_state.cold.55+0x15b/0x6ca
[30129.876576] which lock already depends on the new lock.
[30129.876577] the existing dependency chain (in reverse order) is:
[30129.876578] -> #3 (&pool->lock/1){-.-.}-{2:2}:
[30129.876581]        _raw_spin_lock+0x30/0x70
[30129.876581]        __queue_work+0x1a3/0x10f0
[30129.876582]        queue_work_on+0x78/0x80
[30129.876582]        pty_write+0x165/0x1e0
[30129.876583]        n_tty_write+0x47f/0xf00
[30129.876583]        tty_write+0x3d6/0x8d0
[30129.876584]        vfs_write+0x1a8/0x650
[30129.876588] -> #2 (&port->lock#2){-.-.}-{2:2}:
[30129.876590]        _raw_spin_lock_irqsave+0x3b/0x80
[30129.876591]        tty_port_tty_get+0x1d/0xb0
[30129.876592]        tty_port_default_wakeup+0xb/0x30
[30129.876592]        serial8250_tx_chars+0x3d6/0x970
[30129.876593]        serial8250_handle_irq.part.12+0x216/0x380
[30129.876593]        serial8250_default_handle_irq+0x82/0xe0
[30129.876594]        serial8250_interrupt+0xdd/0x1b0
[30129.876595]        __handle_irq_event_percpu+0xfc/0x850
[30129.876602] -> #1 (&port->lock){-.-.}-{2:2}:
[30129.876605]        _raw_spin_lock_irqsave+0x3b/0x80
[30129.876605]        serial8250_console_write+0x12d/0x900
[30129.876606]        console_unlock+0x679/0xa90
[30129.876606]        register_console+0x371/0x6e0
[30129.876607]        univ8250_console_init+0x24/0x27
[30129.876607]        console_init+0x2f9/0x45e
[30129.876609] -> #0 (console_owner){....}-{0:0}:
[30129.876611]        __lock_acquire+0x2f70/0x4e90
[30129.876612]        lock_acquire+0x1ac/0xad0
[30129.876612]        console_unlock+0x460/0xa90
[30129.876613]        vprintk_emit+0x130/0x420
[30129.876613]        printk+0x9f/0xc5
[30129.876614]        show_pwq+0x154/0x618
[30129.876615]        show_workqueue_state.cold.55+0x193/0x6ca
[30129.876615]        __handle_sysrq+0x244/0x460
[30129.876616]        write_sysrq_trigger+0x48/0x4a
[30129.876616]        proc_reg_write+0x1a6/0x240
[30129.876617]        vfs_write+0x1a8/0x650
[30129.876619] other info that might help us debug this:
[30129.876620] Chain exists of:
[30129.876621]   console_owner --> &port->lock#2 --> &pool->lock/1
[30129.876625]  Possible unsafe locking scenario:
[30129.876626]        CPU0                    CPU1
[30129.876626]        ----                    ----
[30129.876627]   lock(&pool->lock/1);
[30129.876628]                                lock(&port->lock#2);
[30129.876630]                                lock(&pool->lock/1);
[30129.876631]   lock(console_owner);
[30129.876633]  *** DEADLOCK ***
[30129.876634] 5 locks held by sysrq.sh/1222:
[30129.876634]  #0: ffff8881d3ce0470 (sb_writers#3){.+.+}-{0:0}, at: vfs_write+0x359/0x650
[30129.876637]  #1: ffffffff92c612c0 (rcu_read_lock){....}-{1:2}, at: __handle_sysrq+0x4d/0x460
[30129.876640]  #2: ffffffff92c612c0 (rcu_read_lock){....}-{1:2}, at: show_workqueue_state+0x5/0xf0
[30129.876642]  #3: ffff888107cb9018 (&pool->lock/1){-.-.}-{2:2}, at: show_workqueue_state.cold.55+0x15b/0x6ca
[30129.876645]  #4: ffffffff92c39980 (console_lock){+.+.}-{0:0}, at: vprintk_emit+0x123/0x420
[30129.876648] stack backtrace:
[30129.876649] CPU: 3 PID: 1222 Comm: sysrq.sh Tainted: G S      W         5.9.0-rc2+ #3
[30129.876649] Hardware name: Intel Corporation 2012 Client Platform/Emerald Lake 2, BIOS ACRVMBY1.86C.0078.P00.1201161002 01/16/2012
[30129.876650] Call Trace:
[30129.876650]  dump_stack+0x9d/0xe0
[30129.876651]  check_noncircular+0x34f/0x410
[30129.876653]  __lock_acquire+0x2f70/0x4e90
[30129.876656]  lock_acquire+0x1ac/0xad0
[30129.876658]  console_unlock+0x460/0xa90
[30129.876660]  vprintk_emit+0x130/0x420
[30129.876660]  printk+0x9f/0xc5
[30129.876661]  show_pwq+0x154/0x618
[30129.876662]  show_workqueue_state.cold.55+0x193/0x6ca
[30129.876664]  __handle_sysrq+0x244/0x460
[30129.876665]  write_sysrq_trigger+0x48/0x4a
[30129.876665]  proc_reg_write+0x1a6/0x240
[30129.876666]  vfs_write+0x1a8/0x650

It looks like the commit was aimed to protect tty_insert_flip_string and there is no need for tty_flip_buffer_push to be under this lock.

Fixes b6da31b2c07c ("tty: Fix data race in tty_insert_flip_string_fixed_flag")
---
 drivers/tty/pty.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/tty/pty.c +1 -1
index c8a2e5b0eff76..8ee146b14aae8 100644
@@ -115,10 +115,10 @@ static int pty_write(struct tty_struct *tty, const unsigned char *buf, int c)
 		spin_lock_irqsave(&to->port->lock, flags);
 		/* Stuff the data into the input queue of the other end */
 		c = tty_insert_flip_string(to->port, buf, c);
+		spin_unlock_irqrestore(&to->port->lock, flags);
 		/* And shovel */
 		if (c)
 			tty_flip_buffer_push(to->port);
-		spin_unlock_irqrestore(&to->port->lock, flags);
 	}
 	return c;
 }
Signature · 1 line
2.25.1
author maintainer
#39 lore raw

PATCH 39/112 drivers/virt/fsl_hypervisor: Fix error handling path

In reply to Greg Kroah-Hartman

From: Souptick Joarder <[email protected]>

[ Upstream commit 7f360bec37857bfd5a48cef21d86f58a09a3df63 ]

First, when memory allocation for sg_list_unaligned failed, there is a bug of calling put_pages() as we haven't pinned any pages.

Second, if get_user_pages_fast() failed we should unpin num_pinned pages.

This will address both.

As part of these changes, minor update in documentation.

Fixes 6db7199407ca ("drivers/virt: introduce Freescale hypervisor management driver")
---
 drivers/virt/fsl_hypervisor.c | 17 ++++++++---------
 1 file changed, 8 insertions(+), 9 deletions(-)
drivers/virt/fsl_hypervisor.c +8 -9
index 9f96c7e61387d..0d11b5043db53 100644
@@ -157,7 +157,7 @@ static long ioctl_memcpy(struct fsl_hv_ioctl_memcpy __user *p)
 
 	unsigned int i;
 	long ret = 0;
-	int num_pinned; /* return value from get_user_pages() */
+	int num_pinned = 0; /* return value from get_user_pages_fast() */
 	phys_addr_t remote_paddr; /* The next address in the remote buffer */
 	uint32_t count; /* The number of bytes left to copy */
 
@@ -174,7 +174,7 @@ static long ioctl_memcpy(struct fsl_hv_ioctl_memcpy __user *p)
 		return -EINVAL;
 
 	/*
-	 * The array of pages returned by get_user_pages() covers only
+	 * The array of pages returned by get_user_pages_fast() covers only
 	 * page-aligned memory.  Since the user buffer is probably not
 	 * page-aligned, we need to handle the discrepancy.
 	 *
@@ -224,7 +224,7 @@ static long ioctl_memcpy(struct fsl_hv_ioctl_memcpy __user *p)
 
 	/*
 	 * 'pages' is an array of struct page pointers that's initialized by
-	 * get_user_pages().
+	 * get_user_pages_fast().
 	 */
 	pages = kzalloc(num_pages * sizeof(struct page *), GFP_KERNEL);
 	if (!pages) {
@@ -241,7 +241,7 @@ static long ioctl_memcpy(struct fsl_hv_ioctl_memcpy __user *p)
 	if (!sg_list_unaligned) {
 		pr_debug("fsl-hv: could not allocate S/G list\n");
 		ret = -ENOMEM;
-		goto exit;
+		goto free_pages;
 	}
 	sg_list = PTR_ALIGN(sg_list_unaligned, sizeof(struct fh_sg_list));
 
@@ -254,7 +254,6 @@ static long ioctl_memcpy(struct fsl_hv_ioctl_memcpy __user *p)
 	up_read(&current->mm->mmap_sem);
 
 	if (num_pinned != num_pages) {
-		/* get_user_pages() failed */
 		pr_debug("fsl-hv: could not lock source buffer\n");
 		ret = (num_pinned < 0) ? num_pinned : -EFAULT;
 		goto exit;
@@ -296,13 +295,13 @@ static long ioctl_memcpy(struct fsl_hv_ioctl_memcpy __user *p)
 		virt_to_phys(sg_list), num_pages);
 
 exit:
-	if (pages) {
-		for (i = 0; i < num_pages; i++)
-			if (pages[i])
-				put_page(pages[i]);
+	if (pages && (num_pinned > 0)) {
+		for (i = 0; i < num_pinned; i++)
+			put_page(pages[i]);
 	}
 
 	kfree(sg_list_unaligned);
+free_pages:
 	kfree(pages);
 
 	if (!ret)
Signature · 1 line
2.25.1
author maintainer
#40 lore raw

PATCH 40/112 video: fbdev: vga16fb: fix setting of pixclock because a pass-by-value error

In reply to Greg Kroah-Hartman

From: Colin Ian King <[email protected]>

[ Upstream commit c72fab81ceaa54408b827a2f0486d9a0f4be34cf ]

The pixclock is being set locally because it is being passed as a pass-by-value argument rather than pass-by-reference, so the computed pixclock is never being set in var->pixclock. Fix this by passing by reference.

[This dates back to 2002, I found the offending commit from the git history git://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git ]

Addresses-Coverity: ("Unused value")

Cc Daniel Vetter <[email protected]>
Cc Jani Nikula <[email protected]>
[b.zolnierkie: minor patch summary fixup]
[b.zolnierkie: removed "Fixes:" tag (not in upstream tree)]
---
 drivers/video/fbdev/vga16fb.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)
drivers/video/fbdev/vga16fb.c +7 -7
index 1acdb41a8a7c3..06cee2a40a9bf 100644
@@ -243,7 +243,7 @@ static void vga16fb_update_fix(struct fb_info *info)
 }
 
 static void vga16fb_clock_chip(struct vga16fb_par *par,
-			       unsigned int pixclock,
+			       unsigned int *pixclock,
 			       const struct fb_info *info,
 			       int mul, int div)
 {
@@ -259,14 +259,14 @@ static void vga16fb_clock_chip(struct vga16fb_par *par,
 		{     0 /* bad */,    0x00, 0x00}};
 	int err;
 
-	pixclock = (pixclock * mul) / div;
+	*pixclock = (*pixclock * mul) / div;
 	best = vgaclocks;
-	err = pixclock - best->pixclock;
+	err = *pixclock - best->pixclock;
 	if (err < 0) err = -err;
 	for (ptr = vgaclocks + 1; ptr->pixclock; ptr++) {
 		int tmp;
 
-		tmp = pixclock - ptr->pixclock;
+		tmp = *pixclock - ptr->pixclock;
 		if (tmp < 0) tmp = -tmp;
 		if (tmp < err) {
 			err = tmp;
@@ -275,7 +275,7 @@ static void vga16fb_clock_chip(struct vga16fb_par *par,
 	}
 	par->misc |= best->misc;
 	par->clkdiv = best->seq_clock_mode;
-	pixclock = (best->pixclock * div) / mul;		
+	*pixclock = (best->pixclock * div) / mul;
 }
 			       
 #define FAIL(X) return -EINVAL
@@ -497,10 +497,10 @@ static int vga16fb_check_var(struct fb_var_screeninfo *var,
 
 	if (mode & MODE_8BPP)
 		/* pixel clock == vga clock / 2 */
-		vga16fb_clock_chip(par, var->pixclock, info, 1, 2);
+		vga16fb_clock_chip(par, &var->pixclock, info, 1, 2);
 	else
 		/* pixel clock == vga clock */
-		vga16fb_clock_chip(par, var->pixclock, info, 1, 1);
+		vga16fb_clock_chip(par, &var->pixclock, info, 1, 1);
 	
 	var->red.offset = var->green.offset = var->blue.offset = 
 	var->transp.offset = 0;
Signature · 1 line
2.25.1
author maintainer
#41 lore raw

PATCH 41/112 video: fbdev: sis: fix null ptr dereference

In reply to Greg Kroah-Hartman

From: Tom Rix <[email protected]>

[ Upstream commit ad6f93e9cd56f0b10e9b22e3e137d17a1a035242 ]

Clang static analysis reports this representative error

init.c:2501:18: warning: Array access (from variable 'queuedata') results
in a null pointer dereference

      templ |= ((queuedata[i] & 0xc0) << 3);

This is the problem block of code

   if(ModeNo > 0x13) {
      ...
      if(SiS_Pr->ChipType == SIS_730) {
	 queuedata = &FQBQData730[0];
      } else {
	 queuedata = &FQBQData[0];
      }

} else {

   }

queuedata is not set in the else block

Reviewing the old code, the arrays FQBQData730 and FQBQData were used directly.

So hoist the setting of queuedata out of the if-else block.

---
 drivers/video/fbdev/sis/init.c | 11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)
drivers/video/fbdev/sis/init.c +5 -6
index dfe3eb769638b..fde27feae5d0c 100644
@@ -2428,6 +2428,11 @@ SiS_SetCRT1FIFO_630(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
 
    i = 0;
 
+	if (SiS_Pr->ChipType == SIS_730)
+		queuedata = &FQBQData730[0];
+	else
+		queuedata = &FQBQData[0];
+
    if(ModeNo > 0x13) {
 
       /* Get VCLK  */
@@ -2445,12 +2450,6 @@ SiS_SetCRT1FIFO_630(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
       /* Get half colordepth */
       colorth = colortharray[(SiS_Pr->SiS_ModeType - ModeEGA)];
 
-      if(SiS_Pr->ChipType == SIS_730) {
-	 queuedata = &FQBQData730[0];
-      } else {
-	 queuedata = &FQBQData[0];
-      }
-
       do {
 	 templ = SiS_CalcDelay2(SiS_Pr, queuedata[i]) * VCLK * colorth;
 
Signature · 1 line
2.25.1
author maintainer
#42 lore raw

PATCH 42/112 HID: roccat: add bounds checking in kone_sysfs_write_settings()

In reply to Greg Kroah-Hartman

From: Dan Carpenter <[email protected]>

[ Upstream commit d4f98dbfe717490e771b6e701904bfcf4b4557f0 ]

This code doesn't check if "settings->startup_profile" is within bounds and that could result in an out of bounds array access. What the code does do is it checks if the settings can be written to the firmware, so it's possible that the firmware has a bounds check? It's safer and easier to verify when the bounds checking is done in the kernel.

Fixes 14bf62cde794 ("HID: add driver for Roccat Kone gaming mouse")
---
 drivers/hid/hid-roccat-kone.c | 23 ++++++++++++++++-------
 1 file changed, 16 insertions(+), 7 deletions(-)
drivers/hid/hid-roccat-kone.c +16 -7
index c29265055ac1a..6c2b821c8d8b5 100644
@@ -299,31 +299,40 @@ static ssize_t kone_sysfs_write_settings(struct file *fp, struct kobject *kobj,
 	struct kone_device *kone = hid_get_drvdata(dev_get_drvdata(dev));
 	struct usb_device *usb_dev = interface_to_usbdev(to_usb_interface(dev));
 	int retval = 0, difference, old_profile;
+	struct kone_settings *settings = (struct kone_settings *)buf;
 
 	/* I need to get my data in one piece */
 	if (off != 0 || count != sizeof(struct kone_settings))
 		return -EINVAL;
 
 	mutex_lock(&kone->kone_lock);
-	difference = memcmp(buf, &kone->settings, sizeof(struct kone_settings));
+	difference = memcmp(settings, &kone->settings,
+			    sizeof(struct kone_settings));
 	if (difference) {
-		retval = kone_set_settings(usb_dev,
-				(struct kone_settings const *)buf);
-		if (retval) {
-			mutex_unlock(&kone->kone_lock);
-			return retval;
+		if (settings->startup_profile < 1 ||
+		    settings->startup_profile > 5) {
+			retval = -EINVAL;
+			goto unlock;
 		}
 
+		retval = kone_set_settings(usb_dev, settings);
+		if (retval)
+			goto unlock;
+
 		old_profile = kone->settings.startup_profile;
-		memcpy(&kone->settings, buf, sizeof(struct kone_settings));
+		memcpy(&kone->settings, settings, sizeof(struct kone_settings));
 
 		kone_profile_activated(kone, kone->settings.startup_profile);
 
 		if (kone->settings.startup_profile != old_profile)
 			kone_profile_report(kone, kone->settings.startup_profile);
 	}
+unlock:
 	mutex_unlock(&kone->kone_lock);
 
+	if (retval)
+		return retval;
+
 	return sizeof(struct kone_settings);
 }
 static BIN_ATTR(settings, 0660, kone_sysfs_read_settings,
Signature · 1 line
2.25.1
author maintainer
#43 lore raw

PATCH 43/112 ath6kl: wmi: prevent a shift wrapping bug in ath6kl_wmi_delete_pstream_cmd()

In reply to Greg Kroah-Hartman

From: Dan Carpenter <[email protected]>

[ Upstream commit 6a950755cec1a90ddaaff3e4acb5333617441c32 ]

The "tsid" is a user controlled u8 which comes from debugfs. Values more than 15 are invalid because "active_tsids" is a 16 bit variable. If the value of "tsid" is more than 31 then that leads to a shift wrapping bug.

Fixes 8fffd9e5ec9e ("ath6kl: Implement support for QOS-enable and QOS-disable from userspace")
---
 drivers/net/wireless/ath/ath6kl/wmi.c | 5 +++++
 1 file changed, 5 insertions(+)
drivers/net/wireless/ath/ath6kl/wmi.c +5 -0
index b2ec254f154e0..7e1010475cfb2 100644
@@ -2644,6 +2644,11 @@ int ath6kl_wmi_delete_pstream_cmd(struct wmi *wmi, u8 if_idx, u8 traffic_class,
 		return -EINVAL;
 	}
 
+	if (tsid >= 16) {
+		ath6kl_err("invalid tsid: %d\n", tsid);
+		return -EINVAL;
+	}
+
 	skb = ath6kl_wmi_get_new_buf(sizeof(*cmd));
 	if (!skb)
 		return -ENOMEM;
Signature · 1 line
2.25.1
author maintainer
#44 lore raw

PATCH 44/112 misc: mic: scif: Fix error handling path

In reply to Greg Kroah-Hartman

From: Souptick Joarder <[email protected]>

[ Upstream commit a81072a9c0ae734b7889929b0bc070fe3f353f0e ]

Inside __scif_pin_pages(), when map_flags != SCIF_MAP_KERNEL it will call pin_user_pages_fast() to map nr_pages. However, pin_user_pages_fast() might fail with a return value -ERRNO.

The return value is stored in pinned_pages->nr_pages. which in turn is passed to unpin_user_pages(), which expects pinned_pages->nr_pages >=0, else disaster.

Fix this by assigning pinned_pages->nr_pages to 0 if pin_user_pages_fast() returns -ERRNO.

Fixes ba612aa8b487 ("misc: mic: SCIF memory registration and unregistration")
Cc John Hubbard <[email protected]>
Cc Ira Weiny <[email protected]>
Cc Dan Carpenter <[email protected]>
---
 drivers/misc/mic/scif/scif_rma.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/misc/mic/scif/scif_rma.c +2 -2
index 71c69e1c4ac05..4188b88c20a4a 100644
@@ -1403,6 +1403,8 @@ int __scif_pin_pages(void *addr, size_t len, int *out_prot,
 				NULL);
 		up_write(&mm->mmap_sem);
 		if (nr_pages != pinned_pages->nr_pages) {
+			if (pinned_pages->nr_pages < 0)
+				pinned_pages->nr_pages = 0;
 			if (try_upgrade) {
 				if (ulimit)
 					__scif_dec_pinned_vm_lock(mm,
@@ -1423,7 +1425,6 @@ int __scif_pin_pages(void *addr, size_t len, int *out_prot,
 
 	if (pinned_pages->nr_pages < nr_pages) {
 		err = -EFAULT;
-		pinned_pages->nr_pages = nr_pages;
 		goto dec_pinned;
 	}
 
@@ -1436,7 +1437,6 @@ int __scif_pin_pages(void *addr, size_t len, int *out_prot,
 		__scif_dec_pinned_vm_lock(mm, nr_pages, 0);
 	/* Something went wrong! Rollback */
 error_unmap:
-	pinned_pages->nr_pages = nr_pages;
 	scif_destroy_pinned_pages(pinned_pages);
 	*pages = NULL;
 	dev_dbg(scif_info.mdev.this_device,
Signature · 1 line
2.25.1
author maintainer
#45 lore raw

PATCH 45/112 ALSA: seq: oss: Avoid mutex lock for a long-time ioctl

In reply to Greg Kroah-Hartman

From: Takashi Iwai <[email protected]>

[ Upstream commit 2759caad2600d503c3b0ed800e7e03d2cd7a4c05 ]

Recently we applied a fix to cover the whole OSS sequencer ioctls with the mutex for dealing with the possible races. This works fine in general, but in theory, this may lead to unexpectedly long stall if an ioctl like SNDCTL_SEQ_SYNC is issued and an event with the far future timestamp was queued.

For fixing such a potential stall, this patch changes the mutex lock applied conditionally excluding such an ioctl command. Also, change the mutex_lock() with the interruptible version for user to allow escaping from the big-hammer mutex.

Fixes 80982c7e834e ("ALSA: seq: oss: Serialize ioctls")
---
 sound/core/seq/oss/seq_oss.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)
sound/core/seq/oss/seq_oss.c +5 -2
index 8044775999eda..4d1548b951c41 100644
@@ -186,9 +186,12 @@ odev_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 	if (snd_BUG_ON(!dp))
 		return -ENXIO;
 
-	mutex_lock(&register_mutex);
+	if (cmd != SNDCTL_SEQ_SYNC &&
+	    mutex_lock_interruptible(&register_mutex))
+		return -ERESTARTSYS;
 	rc = snd_seq_oss_ioctl(dp, cmd, arg);
-	mutex_unlock(&register_mutex);
+	if (cmd != SNDCTL_SEQ_SYNC)
+		mutex_unlock(&register_mutex);
 	return rc;
 }
 
Signature · 1 line
2.25.1
author maintainer
#46 lore raw

PATCH 46/112 quota: clear padding in v2r1_mem2diskdqb()

In reply to Greg Kroah-Hartman

From: Eric Dumazet <[email protected]>

[ Upstream commit 3d3dc274ce736227e3197868ff749cff2f175f63 ]

Freshly allocated memory contains garbage, better make sure to init all struct v2r1_disk_dqblk fields to avoid KMSAN report:

BUG: KMSAN: uninit-value in qtree_entry_unused+0x137/0x1b0 fs/quota/quota_tree.c:218
CPU: 0 PID: 23373 Comm: syz-executor.1 Not tainted 5.9.0-rc4-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x21c/0x280 lib/dump_stack.c:118
 kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:122
 __msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:219
 qtree_entry_unused+0x137/0x1b0 fs/quota/quota_tree.c:218
 v2r1_mem2diskdqb+0x43d/0x710 fs/quota/quota_v2.c:285
 qtree_write_dquot+0x226/0x870 fs/quota/quota_tree.c:394
 v2_write_dquot+0x1ad/0x280 fs/quota/quota_v2.c:333
 dquot_commit+0x4af/0x600 fs/quota/dquot.c:482
 ext4_write_dquot fs/ext4/super.c:5934 [inline]
 ext4_mark_dquot_dirty+0x4d8/0x6a0 fs/ext4/super.c:5985
 mark_dquot_dirty fs/quota/dquot.c:347 [inline]
 mark_all_dquot_dirty fs/quota/dquot.c:385 [inline]
 dquot_alloc_inode+0xc05/0x12b0 fs/quota/dquot.c:1755
 __ext4_new_inode+0x8204/0x9d70 fs/ext4/ialloc.c:1155
 ext4_tmpfile+0x41a/0x850 fs/ext4/namei.c:2686
 vfs_tmpfile+0x2a2/0x570 fs/namei.c:3283
 do_tmpfile fs/namei.c:3316 [inline]
 path_openat+0x4035/0x6a90 fs/namei.c:3359
 do_filp_open+0x2b8/0x710 fs/namei.c:3395
 do_sys_openat2+0xa88/0x1140 fs/open.c:1168
 do_sys_open fs/open.c:1184 [inline]
 __do_compat_sys_openat fs/open.c:1242 [inline]
 __se_compat_sys_openat+0x2a4/0x310 fs/open.c:1240
 __ia32_compat_sys_openat+0x56/0x70 fs/open.c:1240
 do_syscall_32_irqs_on arch/x86/entry/common.c:80 [inline]
 __do_fast_syscall_32+0x129/0x180 arch/x86/entry/common.c:139
 do_fast_syscall_32+0x6a/0xc0 arch/x86/entry/common.c:162
 do_SYSENTER_32+0x73/0x90 arch/x86/entry/common.c:205
 entry_SYSENTER_compat_after_hwframe+0x4d/0x5c
RIP: 0023:0xf7ff4549
Code: b8 01 10 06 03 74 b4 01 10 07 03 74 b0 01 10 08 03 74 d8 01 00 00 00 00 00 00 00 00 00 00 00 00 00 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59 c3 90 90 90 90 eb 0d 90 90 90 90 90 90 90 90 90 90 90 90
RSP: 002b:00000000f55cd0cc EFLAGS: 00000296 ORIG_RAX: 0000000000000127
RAX: ffffffffffffffda RBX: 00000000ffffff9c RCX: 0000000020000000
RDX: 0000000000410481 RSI: 0000000000000000 RDI: 0000000000000000
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000

Uninit was created at:

 kmsan_save_stack_with_flags mm/kmsan/kmsan.c:143 [inline]
 kmsan_internal_poison_shadow+0x66/0xd0 mm/kmsan/kmsan.c:126
 kmsan_slab_alloc+0x8a/0xe0 mm/kmsan/kmsan_hooks.c:80
 slab_alloc_node mm/slub.c:2907 [inline]
 slab_alloc mm/slub.c:2916 [inline]
 __kmalloc+0x2bb/0x4b0 mm/slub.c:3982
 kmalloc include/linux/slab.h:559 [inline]
 getdqbuf+0x56/0x150 fs/quota/quota_tree.c:52
 qtree_write_dquot+0xf2/0x870 fs/quota/quota_tree.c:378
 v2_write_dquot+0x1ad/0x280 fs/quota/quota_v2.c:333
 dquot_commit+0x4af/0x600 fs/quota/dquot.c:482
 ext4_write_dquot fs/ext4/super.c:5934 [inline]
 ext4_mark_dquot_dirty+0x4d8/0x6a0 fs/ext4/super.c:5985
 mark_dquot_dirty fs/quota/dquot.c:347 [inline]
 mark_all_dquot_dirty fs/quota/dquot.c:385 [inline]
 dquot_alloc_inode+0xc05/0x12b0 fs/quota/dquot.c:1755
 __ext4_new_inode+0x8204/0x9d70 fs/ext4/ialloc.c:1155
 ext4_tmpfile+0x41a/0x850 fs/ext4/namei.c:2686
 vfs_tmpfile+0x2a2/0x570 fs/namei.c:3283
 do_tmpfile fs/namei.c:3316 [inline]
 path_openat+0x4035/0x6a90 fs/namei.c:3359
 do_filp_open+0x2b8/0x710 fs/namei.c:3395
 do_sys_openat2+0xa88/0x1140 fs/open.c:1168
 do_sys_open fs/open.c:1184 [inline]
 __do_compat_sys_openat fs/open.c:1242 [inline]
 __se_compat_sys_openat+0x2a4/0x310 fs/open.c:1240
 __ia32_compat_sys_openat+0x56/0x70 fs/open.c:1240
 do_syscall_32_irqs_on arch/x86/entry/common.c:80 [inline]
 __do_fast_syscall_32+0x129/0x180 arch/x86/entry/common.c:139
 do_fast_syscall_32+0x6a/0xc0 arch/x86/entry/common.c:162
 do_SYSENTER_32+0x73/0x90 arch/x86/entry/common.c:205
 entry_SYSENTER_compat_after_hwframe+0x4d/0x5c
Fixes 498c60153ebb ("quota: Implement quota format with 64-bit space and inode limits")
Cc Jan Kara <[email protected]>
---
 fs/quota/quota_v2.c | 1 +
 1 file changed, 1 insertion(+)
fs/quota/quota_v2.c +1 -0
index 2aa012a68e90e..9891b8fb0432f 100644
@@ -266,6 +266,7 @@ static void v2r1_mem2diskdqb(void *dp, struct dquot *dquot)
 	d->dqb_curspace = cpu_to_le64(m->dqb_curspace);
 	d->dqb_btime = cpu_to_le64(m->dqb_btime);
 	d->dqb_id = cpu_to_le32(from_kqid(&init_user_ns, dquot->dq_id));
+	d->dqb_pad = 0;
 	if (qtree_entry_unused(info, dp))
 		d->dqb_itime = cpu_to_le64(1);
 }
Signature · 1 line
2.25.1
author maintainer
#47 lore raw

PATCH 47/112 net: enic: Cure the enic api locking trainwreck

In reply to Greg Kroah-Hartman

From: Thomas Gleixner <[email protected]>

[ Upstream commit a53b59ece86c86d16d12ccdaa1ad0c78250a9d96 ]

enic_dev_wait() has a BUG_ON(in_interrupt()).

Chasing the callers of enic_dev_wait() revealed the gems of enic_reset() and enic_tx_hang_reset() which are both invoked through work queues in order to be able to call rtnl_lock(). So far so good.

After locking rtnl both functions acquire enic::enic_api_lock which serializes against the (ab)use from infiniband. This is where the trainwreck starts.

enic::enic_api_lock is a spin_lock() which implicitly disables preemption, but both functions invoke a ton of functions under that lock which can sleep. The BUG_ON(in_interrupt()) does not trigger in that case because it can't detect the preempt disabled condition.

This clearly has never been tested with any of the mandatory debug options for 7+ years, which would have caught that for sure.

Cure it by adding a enic_api_busy member to struct enic, which is modified and evaluated with enic::enic_api_lock held.

If enic_api_devcmd_proxy_by_index() observes enic::enic_api_busy as true, it drops enic::enic_api_lock and busy waits for enic::enic_api_busy to become false.

It would be smarter to wait for a completion of that busy period, but enic_api_devcmd_proxy_by_index() is called with other spin locks held which obviously can't sleep.

Remove the BUG_ON(in_interrupt()) check as well because it's incomplete and with proper debugging enabled the problem would have been caught from the debug checks in schedule_timeout().

Fixes 0b038566c0ea ("drivers/net: enic: Add an interface for USNIC to interact with firmware")
---
 drivers/net/ethernet/cisco/enic/enic.h      |  1 +
 drivers/net/ethernet/cisco/enic/enic_api.c  |  6 +++++
 drivers/net/ethernet/cisco/enic/enic_main.c | 27 ++++++++++++++++-----
 3 files changed, 28 insertions(+), 6 deletions(-)
drivers/net/ethernet/cisco/enic/enic.h +1 -0
index 7ba6d530b0c0a..230a4157ae9d0 100644
@@ -163,6 +163,7 @@ struct enic {
 	u16 num_vfs;
 #endif
 	spinlock_t enic_api_lock;
+	bool enic_api_busy;
 	struct enic_port_profile *pp;
 
 	/* work queue cache line section */
drivers/net/ethernet/cisco/enic/enic_api.c +6 -0
index b161f24522b87..b028ea2dec2b9 100644
@@ -34,6 +34,12 @@ int enic_api_devcmd_proxy_by_index(struct net_device *netdev, int vf,
 	struct vnic_dev *vdev = enic->vdev;
 
 	spin_lock(&enic->enic_api_lock);
+	while (enic->enic_api_busy) {
+		spin_unlock(&enic->enic_api_lock);
+		cpu_relax();
+		spin_lock(&enic->enic_api_lock);
+	}
+
 	spin_lock_bh(&enic->devcmd_lock);
 
 	vnic_dev_cmd_proxy_by_index_start(vdev, vf);
drivers/net/ethernet/cisco/enic/enic_main.c +21 -6
index 3fd1cba0c7ec3..5c74e55b75e52 100644
@@ -1938,8 +1938,6 @@ static int enic_dev_wait(struct vnic_dev *vdev,
 	int done;
 	int err;
 
-	BUG_ON(in_interrupt());
-
 	err = start(vdev, arg);
 	if (err)
 		return err;
@@ -2116,6 +2114,13 @@ static int enic_set_rss_nic_cfg(struct enic *enic)
 		rss_hash_bits, rss_base_cpu, rss_enable);
 }
 
+static void enic_set_api_busy(struct enic *enic, bool busy)
+{
+	spin_lock(&enic->enic_api_lock);
+	enic->enic_api_busy = busy;
+	spin_unlock(&enic->enic_api_lock);
+}
+
 static void enic_reset(struct work_struct *work)
 {
 	struct enic *enic = container_of(work, struct enic, reset);
@@ -2125,7 +2130,9 @@ static void enic_reset(struct work_struct *work)
 
 	rtnl_lock();
 
-	spin_lock(&enic->enic_api_lock);
+	/* Stop any activity from infiniband */
+	enic_set_api_busy(enic, true);
+
 	enic_stop(enic->netdev);
 	enic_dev_soft_reset(enic);
 	enic_reset_addr_lists(enic);
@@ -2133,7 +2140,10 @@ static void enic_reset(struct work_struct *work)
 	enic_set_rss_nic_cfg(enic);
 	enic_dev_set_ig_vlan_rewrite_mode(enic);
 	enic_open(enic->netdev);
-	spin_unlock(&enic->enic_api_lock);
+
+	/* Allow infiniband to fiddle with the device again */
+	enic_set_api_busy(enic, false);
+
 	call_netdevice_notifiers(NETDEV_REBOOT, enic->netdev);
 
 	rtnl_unlock();
@@ -2145,7 +2155,9 @@ static void enic_tx_hang_reset(struct work_struct *work)
 
 	rtnl_lock();
 
-	spin_lock(&enic->enic_api_lock);
+	/* Stop any activity from infiniband */
+	enic_set_api_busy(enic, true);
+
 	enic_dev_hang_notify(enic);
 	enic_stop(enic->netdev);
 	enic_dev_hang_reset(enic);
@@ -2154,7 +2166,10 @@ static void enic_tx_hang_reset(struct work_struct *work)
 	enic_set_rss_nic_cfg(enic);
 	enic_dev_set_ig_vlan_rewrite_mode(enic);
 	enic_open(enic->netdev);
-	spin_unlock(&enic->enic_api_lock);
+
+	/* Allow infiniband to fiddle with the device again */
+	enic_set_api_busy(enic, false);
+
 	call_netdevice_notifiers(NETDEV_REBOOT, enic->netdev);
 
 	rtnl_unlock();
Signature · 1 line
2.25.1
author maintainer
#48 lore raw

PATCH 48/112 mfd: sm501: Fix leaks in probe()

In reply to Greg Kroah-Hartman

From: Dan Carpenter <[email protected]>

[ Upstream commit 8ce24f8967df2836b4557a23e74dc4bb098249f1 ]

This code should clean up if sm501_init_dev() fails.

Fixes b6d6454fdb66 ("[PATCH] mfd: SM501 core driver")
---
 drivers/mfd/sm501.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)
drivers/mfd/sm501.c +7 -1
index fbec711c41956..0fe273d2f6190 100644
@@ -1430,8 +1430,14 @@ static int sm501_plat_probe(struct platform_device *dev)
 		goto err_claim;
 	}
 
-	return sm501_init_dev(sm);
+	ret = sm501_init_dev(sm);
+	if (ret)
+		goto err_unmap;
+
+	return 0;
 
+ err_unmap:
+	iounmap(sm->regs);
  err_claim:
 	release_resource(sm->regs_claim);
 	kfree(sm->regs_claim);
Signature · 1 line
2.25.1
author maintainer
#49 lore raw

PATCH 49/112 usb: gadget: u_ether: enable qmult on SuperSpeed Plus as well

In reply to Greg Kroah-Hartman

From: Lorenzo Colitti <[email protected]>

[ Upstream commit 4eea21dc67b0c6ba15ae41b1defa113a680a858e ]

The u_ether driver has a qmult setting that multiplies the transmit queue length (which by default is 2).

The intent is that it should be enabled at high/super speed, but because the code does not explicitly check for USB_SUPER_PLUS, it is disabled at that speed.

Fix this by ensuring that the queue multiplier is enabled for any wired link at high speed or above. Using >= for USB_SPEED_* constants seems correct because it is what the gadget_is_xxxspeed functions do.

The queue multiplier substantially helps performance at higher speeds. On a direct SuperSpeed Plus link to a Linux laptop, iperf3 single TCP stream:

Before (qmult=1): 1.3 Gbps
After (qmult=5): 3.2 Gbps

Fixes 04617db7aa68 ("usb: gadget: add SS descriptors to Ethernet gadget")
---
 drivers/usb/gadget/function/u_ether.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/usb/gadget/function/u_ether.c +1 -1
index e69f20b2a3f44..46c50135ef9f7 100644
@@ -96,7 +96,7 @@ struct eth_dev {
 static inline int qlen(struct usb_gadget *gadget, unsigned qmult)
 {
 	if (gadget_is_dualspeed(gadget) && (gadget->speed == USB_SPEED_HIGH ||
-					    gadget->speed == USB_SPEED_SUPER))
+					    gadget->speed >= USB_SPEED_SUPER))
 		return qmult * DEFAULT_QLEN;
 	else
 		return DEFAULT_QLEN;
Signature · 1 line
2.25.1
author maintainer
#50 lore raw

PATCH 50/112 nl80211: fix non-split wiphy information

In reply to Greg Kroah-Hartman

From: Johannes Berg <[email protected]>

[ Upstream commit ab10c22bc3b2024f0c9eafa463899a071eac8d97 ]

When dumping wiphy information, we try to split the data into many submessages, but for old userspace we still support the old mode where this doesn't happen.

However, in this case we were not resetting our state correctly and dumping multiple messages for each wiphy, which would have broken such older userspace.

This was broken pretty much immediately afterwards because it only worked in the original commit where non-split dumps didn't have any more data than split dumps...

---
 net/wireless/nl80211.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
net/wireless/nl80211.c +4 -1
index 95366e35ab134..7748d674677c9 100644
@@ -1672,7 +1672,10 @@ static int nl80211_send_wiphy(struct cfg80211_registered_device *rdev,
 		 * case we'll continue with more data in the next round,
 		 * but break unconditionally so unsplit data stops here.
 		 */
-		state->split_start++;
+		if (state->split)
+			state->split_start++;
+		else
+			state->split_start = 0;
 		break;
 	case 9:
 		if (rdev->wiphy.extended_capabilities &&
Signature · 1 line
2.25.1
author maintainer
#51 lore raw

PATCH 51/112 mwifiex: fix double free

In reply to Greg Kroah-Hartman

From: Tom Rix <[email protected]>

[ Upstream commit 53708f4fd9cfe389beab5c8daa763bcd0e0b4aef ]

clang static analysis reports this problem:

sdio.c:2403:3: warning: Attempt to free released memory

        kfree(card->mpa_rx.buf);
        ^~~~~~~~~~~~~~~~~~~~~~~

When mwifiex_init_sdio() fails in its first call to mwifiex_alloc_sdio_mpa_buffer, it falls back to calling it again. If the second alloc of mpa_tx.buf fails, the error handler will try to free the old, previously freed mpa_rx.buf. Reviewing the code, it looks like a second double free would happen with mwifiex_cleanup_sdio().

So set both pointers to NULL when they are freed.

Fixes 5e6e3a92b9a4 ("wireless: mwifiex: initial commit for Marvell mwifiex driver")
---
 drivers/net/wireless/mwifiex/sdio.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/net/wireless/mwifiex/sdio.c +2 -0
index 78a8474e1a3dc..abfe4e8700ed3 100644
@@ -1928,6 +1928,8 @@ static int mwifiex_alloc_sdio_mpa_buffers(struct mwifiex_adapter *adapter,
 		kfree(card->mpa_rx.buf);
 		card->mpa_tx.buf_size = 0;
 		card->mpa_rx.buf_size = 0;
+		card->mpa_tx.buf = NULL;
+		card->mpa_rx.buf = NULL;
 	}
 
 	return ret;
Signature · 1 line
2.25.1
author maintainer
#52 lore raw

PATCH 52/112 net: korina: fix kfree of rx/tx descriptor array

In reply to Greg Kroah-Hartman

From: Valentin Vidic <[email protected]>

[ Upstream commit 3af5f0f5c74ecbaf757ef06c3f80d56751277637 ]

kmalloc returns KSEG0 addresses so convert back from KSEG1 in kfree. Also make sure array is freed when the driver is unloaded from the kernel.

Fixes ef11291bcd5f ("Add support the Korina (IDT RC32434) Ethernet MAC")
---
 drivers/net/ethernet/korina.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/net/ethernet/korina.c +2 -1
index 07eabf72c480c..3954c80f70fcb 100644
@@ -1188,7 +1188,7 @@ static int korina_probe(struct platform_device *pdev)
 	return rc;
 
 probe_err_register:
-	kfree(lp->td_ring);
+	kfree(KSEG0ADDR(lp->td_ring));
 probe_err_td_ring:
 	iounmap(lp->tx_dma_regs);
 probe_err_dma_tx:
@@ -1208,6 +1208,7 @@ static int korina_remove(struct platform_device *pdev)
 	iounmap(lp->eth_regs);
 	iounmap(lp->rx_dma_regs);
 	iounmap(lp->tx_dma_regs);
+	kfree(KSEG0ADDR(lp->td_ring));
 
 	unregister_netdev(bif->dev);
 	free_netdev(bif->dev);
Signature · 1 line
2.25.1
author maintainer
#53 lore raw

PATCH 53/112 IB/mlx4: Adjust delayed work when a dup is observed

In reply to Greg Kroah-Hartman

From: Håkon Bugge <[email protected]>

[ Upstream commit 785167a114855c5aa75efca97000e405c2cc85bf ]

When scheduling delayed work to clean up the cache, if the entry already has been scheduled for deletion, we adjust the delay.

Fixes 3cf69cc8dbeb ("IB/mlx4: Add CM paravirtualization")
---
 drivers/infiniband/hw/mlx4/cm.c | 3 +++
 1 file changed, 3 insertions(+)
drivers/infiniband/hw/mlx4/cm.c +3 -0
index 5dc920fe13269..c8c586c78d071 100644
@@ -309,6 +309,9 @@ static void schedule_delayed(struct ib_device *ibdev, struct id_map_entry *id)
 	if (!sriov->is_going_down) {
 		id->scheduled_delete = 1;
 		schedule_delayed_work(&id->timeout, CM_CLEANUP_CACHE_TIMEOUT);
+	} else if (id->scheduled_delete) {
+		/* Adjust timeout if already scheduled */
+		mod_delayed_work(system_wq, &id->timeout, CM_CLEANUP_CACHE_TIMEOUT);
 	}
 	spin_unlock_irqrestore(&sriov->going_down_lock, flags);
 	spin_unlock(&sriov->id_map_lock);
Signature · 1 line
2.25.1
author maintainer
#54 lore raw

PATCH 54/112 powerpc/pseries: Fix missing of_node_put() in rng_init()

In reply to Greg Kroah-Hartman

From: Nicholas Mc Guire <[email protected]>

[ Upstream commit 67c3e59443f5fc77be39e2ce0db75fbfa78c7965 ]

The call to of_find_compatible_node() returns a node pointer with refcount incremented thus it must be explicitly decremented here before returning.

Fixes a489043f4626 ("powerpc/pseries: Implement arch_get_random_long() based on H_RANDOM")
---
 arch/powerpc/platforms/pseries/rng.c | 1 +
 1 file changed, 1 insertion(+)
arch/powerpc/platforms/pseries/rng.c +1 -0
index 31ca557af60bc..262b8c5e1b9d0 100644
@@ -40,6 +40,7 @@ static __init int rng_init(void)
 
 	ppc_md.get_random_seed = pseries_get_random_long;
 
+	of_node_put(dn);
 	return 0;
 }
 machine_subsys_initcall(pseries, rng_init);
Signature · 1 line
2.25.1
author maintainer
#55 lore raw

PATCH 55/112 powerpc/icp-hv: Fix missing of_node_put() in success path

In reply to Greg Kroah-Hartman

From: Nicholas Mc Guire <[email protected]>

[ Upstream commit d3e669f31ec35856f5e85df9224ede5bdbf1bc7b ]

Both of_find_compatible_node() and of_find_node_by_type() will return a refcounted node on success - thus for the success path the node must be explicitly released with a of_node_put().

---
 arch/powerpc/sysdev/xics/icp-hv.c | 1 +
 1 file changed, 1 insertion(+)
arch/powerpc/sysdev/xics/icp-hv.c +1 -0
index c1917cf67c3de..3205e64c452bd 100644
@@ -179,6 +179,7 @@ int icp_hv_init(void)
 
 	icp_ops = &icp_hv_ops;
 
+	of_node_put(np);
 	return 0;
 }
 
Signature · 1 line
2.25.1
author maintainer
#56 lore raw

PATCH 56/112 mtd: lpddr: fix excessive stack usage with clang

In reply to Greg Kroah-Hartman

From: Arnd Bergmann <[email protected]>

[ Upstream commit 3e1b6469f8324bee5927b063e2aca30d3e56b907 ]

Building lpddr2_nvm with clang can result in a giant stack usage in one function:

drivers/mtd/lpddr/lpddr2_nvm.c:399:12: error: stack frame size of 1144 bytes in function 'lpddr2_nvm_probe' [-Werror,-Wframe-larger-than=]

The problem is that clang decides to build a copy of the mtd_info structure on the stack and then do a memcpy() into the actual version. It shouldn't really do it that way, but it's not strictly a bug either.

As a workaround, use a static const version of the structure to assign most of the members upfront and then only set the few members that require runtime knowledge at probe time.

---
 drivers/mtd/lpddr/lpddr2_nvm.c | 35 ++++++++++++++++++----------------
 1 file changed, 19 insertions(+), 16 deletions(-)
drivers/mtd/lpddr/lpddr2_nvm.c +19 -16
index 2342277c9bcb0..5e36366d9b36d 100644
@@ -408,6 +408,17 @@ static int lpddr2_nvm_lock(struct mtd_info *mtd, loff_t start_add,
 	return lpddr2_nvm_do_block_op(mtd, start_add, len, LPDDR2_NVM_LOCK);
 }
 
+static const struct mtd_info lpddr2_nvm_mtd_info = {
+	.type		= MTD_RAM,
+	.writesize	= 1,
+	.flags		= (MTD_CAP_NVRAM | MTD_POWERUP_LOCK),
+	._read		= lpddr2_nvm_read,
+	._write		= lpddr2_nvm_write,
+	._erase		= lpddr2_nvm_erase,
+	._unlock	= lpddr2_nvm_unlock,
+	._lock		= lpddr2_nvm_lock,
+};
+
 /*
  * lpddr2_nvm driver probe method
  */
@@ -448,6 +459,7 @@ static int lpddr2_nvm_probe(struct platform_device *pdev)
 		.pfow_base	= OW_BASE_ADDRESS,
 		.fldrv_priv	= pcm_data,
 	};
+
 	if (IS_ERR(map->virt))
 		return PTR_ERR(map->virt);
 
@@ -459,22 +471,13 @@ static int lpddr2_nvm_probe(struct platform_device *pdev)
 		return PTR_ERR(pcm_data->ctl_regs);
 
 	/* Populate mtd_info data structure */
-	*mtd = (struct mtd_info) {
-		.dev		= { .parent = &pdev->dev },
-		.name		= pdev->dev.init_name,
-		.type		= MTD_RAM,
-		.priv		= map,
-		.size		= resource_size(add_range),
-		.erasesize	= ERASE_BLOCKSIZE * pcm_data->bus_width,
-		.writesize	= 1,
-		.writebufsize	= WRITE_BUFFSIZE * pcm_data->bus_width,
-		.flags		= (MTD_CAP_NVRAM | MTD_POWERUP_LOCK),
-		._read		= lpddr2_nvm_read,
-		._write		= lpddr2_nvm_write,
-		._erase		= lpddr2_nvm_erase,
-		._unlock	= lpddr2_nvm_unlock,
-		._lock		= lpddr2_nvm_lock,
-	};
+	*mtd = lpddr2_nvm_mtd_info;
+	mtd->dev.parent		= &pdev->dev;
+	mtd->name		= pdev->dev.init_name;
+	mtd->priv		= map;
+	mtd->size		= resource_size(add_range);
+	mtd->erasesize		= ERASE_BLOCKSIZE * pcm_data->bus_width;
+	mtd->writebufsize	= WRITE_BUFFSIZE * pcm_data->bus_width;
 
 	/* Verify the presence of the device looking for PFOW string */
 	if (!lpddr2_nvm_pfow_present(map)) {
Signature · 1 line
2.25.1
author maintainer
#57 lore raw

PATCH 57/112 mtd: mtdoops: Dont write panic data twice

In reply to Greg Kroah-Hartman

From: Mark Tomlinson <[email protected]>

[ Upstream commit c1cf1d57d1492235309111ea6a900940213a9166 ]

If calling mtdoops_write, don't also schedule work to be done later.

Although this appears to not be causing an issue, possibly because the scheduled work will never get done, it is confusing.

Fixes 016c1291ce70 ("mtd: mtdoops: do not use mtd->panic_write directly")
---
 drivers/mtd/mtdoops.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)
drivers/mtd/mtdoops.c +6 -5
index 97bb8f6304d4f..09165eaac7a15 100644
@@ -313,12 +313,13 @@ static void mtdoops_do_dump(struct kmsg_dumper *dumper,
 	kmsg_dump_get_buffer(dumper, true, cxt->oops_buf + MTDOOPS_HEADER_SIZE,
 			     record_size - MTDOOPS_HEADER_SIZE, NULL);
 
-	/* Panics must be written immediately */
-	if (reason != KMSG_DUMP_OOPS)
+	if (reason != KMSG_DUMP_OOPS) {
+		/* Panics must be written immediately */
 		mtdoops_write(cxt, 1);
-
-	/* For other cases, schedule work to write it "nicely" */
-	schedule_work(&cxt->work_write);
+	} else {
+		/* For other cases, schedule work to write it "nicely" */
+		schedule_work(&cxt->work_write);
+	}
 }
 
 static void mtdoops_notify_add(struct mtd_info *mtd)
Signature · 1 line
2.25.1
author maintainer
#58 lore raw

PATCH 58/112 ARM: 9007/1: l2c: fix prefetch bits init in L2X0_AUX_CTRL using DT values

In reply to Greg Kroah-Hartman

From: Guillaume Tucker <[email protected]>

[ Upstream commit 8e007b367a59bcdf484c81f6df9bd5a4cc179ca6 ]

The L310_PREFETCH_CTRL register bits 28 and 29 to enable data and instruction prefetch respectively can also be accessed via the L2X0_AUX_CTRL register. They appear to be actually wired together in hardware between the registers. Changing them in the prefetch register only will get undone when restoring the aux control register later on. For this reason, set these bits in both registers during initialisation according to the devicetree property values.

Fixes ec3bd0e68a67 ("ARM: 8391/1: l2c: add options to overwrite prefetching behavior")
---
 arch/arm/mm/cache-l2x0.c | 16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)
arch/arm/mm/cache-l2x0.c +12 -4
index 493692d838c67..0b6f8a93d8c60 100644
@@ -1228,20 +1228,28 @@ static void __init l2c310_of_parse(const struct device_node *np,
 
 	ret = of_property_read_u32(np, "prefetch-data", &val);
 	if (ret == 0) {
-		if (val)
+		if (val) {
 			prefetch |= L310_PREFETCH_CTRL_DATA_PREFETCH;
-		else
+			*aux_val |= L310_PREFETCH_CTRL_DATA_PREFETCH;
+		} else {
 			prefetch &= ~L310_PREFETCH_CTRL_DATA_PREFETCH;
+			*aux_val &= ~L310_PREFETCH_CTRL_DATA_PREFETCH;
+		}
+		*aux_mask &= ~L310_PREFETCH_CTRL_DATA_PREFETCH;
 	} else if (ret != -EINVAL) {
 		pr_err("L2C-310 OF prefetch-data property value is missing\n");
 	}
 
 	ret = of_property_read_u32(np, "prefetch-instr", &val);
 	if (ret == 0) {
-		if (val)
+		if (val) {
 			prefetch |= L310_PREFETCH_CTRL_INSTR_PREFETCH;
-		else
+			*aux_val |= L310_PREFETCH_CTRL_INSTR_PREFETCH;
+		} else {
 			prefetch &= ~L310_PREFETCH_CTRL_INSTR_PREFETCH;
+			*aux_val &= ~L310_PREFETCH_CTRL_INSTR_PREFETCH;
+		}
+		*aux_mask &= ~L310_PREFETCH_CTRL_INSTR_PREFETCH;
 	} else if (ret != -EINVAL) {
 		pr_err("L2C-310 OF prefetch-instr property value is missing\n");
 	}
Signature · 1 line
2.25.1
author maintainer
#59 lore raw

PATCH 59/112 powerpc/tau: Use appropriate temperature sample interval

In reply to Greg Kroah-Hartman

From: Finn Thain <[email protected]>

[ Upstream commit 66943005cc41f48e4d05614e8f76c0ca1812f0fd ]

According to the MPC750 Users Manual, the SITV value in Thermal Management Register 3 is 13 bits long. The present code calculates the SITV value as 60 * 500 cycles. This would overflow to give 10 us on a 500 MHz CPU rather than the intended 60 us. (But according to the Microprocessor Datasheet, there is also a factor of 266 that has to be applied to this value on certain parts i.e. speed sort above 266 MHz.) Always use the maximum cycle count, as recommended by the Datasheet.

---
 arch/powerpc/include/asm/reg.h |  2 +-
 arch/powerpc/kernel/tau_6xx.c  | 12 ++++--------
 2 files changed, 5 insertions(+), 9 deletions(-)
arch/powerpc/include/asm/reg.h +1 -1
index ca372bbc0ffee..dd262f09a99ed 100644
@@ -647,7 +647,7 @@
 #define THRM1_TIN	(1 << 31)
 #define THRM1_TIV	(1 << 30)
 #define THRM1_THRES(x)	((x&0x7f)<<23)
-#define THRM3_SITV(x)	((x&0x3fff)<<1)
+#define THRM3_SITV(x)	((x & 0x1fff) << 1)
 #define THRM1_TID	(1<<2)
 #define THRM1_TIE	(1<<1)
 #define THRM1_V		(1<<0)
arch/powerpc/kernel/tau_6xx.c +4 -8
index a753b72efbc0c..1880481322880 100644
@@ -174,15 +174,11 @@ static void tau_timeout(void * info)
 	 * complex sleep code needs to be added. One mtspr every time
 	 * tau_timeout is called is probably not a big deal.
 	 *
-	 * Enable thermal sensor and set up sample interval timer
-	 * need 20 us to do the compare.. until a nice 'cpu_speed' function
-	 * call is implemented, just assume a 500 mhz clock. It doesn't really
-	 * matter if we take too long for a compare since it's all interrupt
-	 * driven anyway.
-	 *
-	 * use a extra long time.. (60 us @ 500 mhz)
+	 * The "PowerPC 740 and PowerPC 750 Microprocessor Datasheet"
+	 * recommends that "the maximum value be set in THRM3 under all
+	 * conditions."
 	 */
-	mtspr(SPRN_THRM3, THRM3_SITV(500*60) | THRM3_E);
+	mtspr(SPRN_THRM3, THRM3_SITV(0x1fff) | THRM3_E);
 
 	local_irq_restore(flags);
 }
Signature · 1 line
2.25.1
author maintainer
#60 lore raw

PATCH 60/112 powerpc/tau: Remove duplicated set_thresholds() call

In reply to Greg Kroah-Hartman

From: Finn Thain <[email protected]>

[ Upstream commit 420ab2bc7544d978a5d0762ee736412fe9c796ab ]

The commentary at the call site seems to disagree with the code. The conditional prevents calling set_thresholds() via the exception handler, which appears to crash. Perhaps that's because it immediately triggers another TAU exception. Anyway, calling set_thresholds() from TAUupdate() is redundant because tau_timeout() does so.

---
 arch/powerpc/kernel/tau_6xx.c | 5 -----
 1 file changed, 5 deletions(-)
arch/powerpc/kernel/tau_6xx.c +0 -5
index 1880481322880..f6a92bf5ebfc6 100644
@@ -107,11 +107,6 @@ void TAUupdate(int cpu)
 #ifdef DEBUG
 	printk("grew = %d\n", tau[cpu].grew);
 #endif
-
-#ifndef CONFIG_TAU_INT /* tau_timeout will do this if not using interrupts */
-	set_thresholds(cpu);
-#endif
-
 }
 
 #ifdef CONFIG_TAU_INT
Signature · 1 line
2.25.1
author maintainer
#61 lore raw

PATCH 61/112 powerpc/tau: Disable TAU between measurements

In reply to Greg Kroah-Hartman

From: Finn Thain <[email protected]>

[ Upstream commit e63d6fb5637e92725cf143559672a34b706bca4f ]

Enabling CONFIG_TAU_INT causes random crashes:

Unrecoverable exception 1700 at c0009414 (msr=1000)

Oops: Unrecoverable exception, sig: 6 [#1]
BE PAGE_SIZE=4K MMU=Hash SMP NR_CPUS=2 PowerMac
Modules linked in:
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.7.0-pmac-00043-gd5f545e1a8593 #5
NIP:  c0009414 LR: c0009414 CTR: c00116fc
REGS: c0799eb8 TRAP: 1700   Not tainted  (5.7.0-pmac-00043-gd5f545e1a8593)
MSR:  00001000 <ME>  CR: 22000228  XER: 00000100

GPR00: 00000000 c0799f70 c076e300 00800000 0291c0ac 00e00000 c076e300 00049032
GPR08: 00000001 c00116fc 00000000 dfbd3200 ffffffff 007f80a8 00000000 00000000
GPR16: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 c075ce04
GPR24: c075ce04 dfff8880 c07b0000 c075ce04 00080000 00000001 c079ef98 c079ef5c NIP [c0009414] arch_cpu_idle+0x24/0x6c
LR [c0009414] arch_cpu_idle+0x24/0x6c

Call Trace:

[c0799f70] [00000001] 0x1 (unreliable)
[c0799f80] [c0060990] do_idle+0xd8/0x17c
[c0799fa0] [c0060ba4] cpu_startup_entry+0x20/0x28
[c0799fb0] [c072d220] start_kernel+0x434/0x44c
[c0799ff0] [00003860] 0x3860
Instruction dump:
XXXXXXXX XXXXXXXX XXXXXXXX 3d20c07b XXXXXXXX XXXXXXXX XXXXXXXX 7c0802a6 XXXXXXXX XXXXXXXX XXXXXXXX 4e800421 XXXXXXXX XXXXXXXX XXXXXXXX 7d2000a6

---[ end trace 3a0c9b5cb216db6b ]---

Resolve this problem by disabling each THRMn comparator when handling the associated THRMn interrupt and by disabling the TAU entirely when updating THRMn thresholds.

---
 arch/powerpc/kernel/tau_6xx.c  | 65 +++++++++++++---------------------
 arch/powerpc/platforms/Kconfig |  9 ++---
 2 files changed, 26 insertions(+), 48 deletions(-)
arch/powerpc/kernel/tau_6xx.c +24 -41
index f6a92bf5ebfc6..70c9d134a9d44 100644
@@ -37,8 +37,6 @@ static struct tau_temp
 
 struct timer_list tau_timer;
 
-#undef DEBUG
-
 /* TODO: put these in a /proc interface, with some sanity checks, and maybe
  * dynamic adjustment to minimize # of interrupts */
 /* configurable values for step size and how much to expand the window when
@@ -71,42 +69,33 @@ void set_thresholds(unsigned long cpu)
 
 void TAUupdate(int cpu)
 {
-	unsigned thrm;
-
-#ifdef DEBUG
-	printk("TAUupdate ");
-#endif
+	u32 thrm;
+	u32 bits = THRM1_TIV | THRM1_TIN | THRM1_V;
 
 	/* if both thresholds are crossed, the step_sizes cancel out
 	 * and the window winds up getting expanded twice. */
-	if((thrm = mfspr(SPRN_THRM1)) & THRM1_TIV){ /* is valid? */
-		if(thrm & THRM1_TIN){ /* crossed low threshold */
-			if (tau[cpu].low >= step_size){
-				tau[cpu].low -= step_size;
-				tau[cpu].high -= (step_size - window_expand);
-			}
-			tau[cpu].grew = 1;
-#ifdef DEBUG
-			printk("low threshold crossed ");
-#endif
+	thrm = mfspr(SPRN_THRM1);
+	if ((thrm & bits) == bits) {
+		mtspr(SPRN_THRM1, 0);
+
+		if (tau[cpu].low >= step_size) {
+			tau[cpu].low -= step_size;
+			tau[cpu].high -= (step_size - window_expand);
 		}
+		tau[cpu].grew = 1;
+		pr_debug("%s: low threshold crossed\n", __func__);
 	}
-	if((thrm = mfspr(SPRN_THRM2)) & THRM1_TIV){ /* is valid? */
-		if(thrm & THRM1_TIN){ /* crossed high threshold */
-			if (tau[cpu].high <= 127-step_size){
-				tau[cpu].low += (step_size - window_expand);
-				tau[cpu].high += step_size;
-			}
-			tau[cpu].grew = 1;
-#ifdef DEBUG
-			printk("high threshold crossed ");
-#endif
+	thrm = mfspr(SPRN_THRM2);
+	if ((thrm & bits) == bits) {
+		mtspr(SPRN_THRM2, 0);
+
+		if (tau[cpu].high <= 127 - step_size) {
+			tau[cpu].low += (step_size - window_expand);
+			tau[cpu].high += step_size;
 		}
+		tau[cpu].grew = 1;
+		pr_debug("%s: high threshold crossed\n", __func__);
 	}
-
-#ifdef DEBUG
-	printk("grew = %d\n", tau[cpu].grew);
-#endif
 }
 
 #ifdef CONFIG_TAU_INT
@@ -131,18 +120,18 @@ void TAUException(struct pt_regs * regs)
 static void tau_timeout(void * info)
 {
 	int cpu;
-	unsigned long flags;
 	int size;
 	int shrink;
 
-	/* disabling interrupts *should* be okay */
-	local_irq_save(flags);
 	cpu = smp_processor_id();
 
 #ifndef CONFIG_TAU_INT
 	TAUupdate(cpu);
 #endif
 
+	/* Stop thermal sensor comparisons and interrupts */
+	mtspr(SPRN_THRM3, 0);
+
 	size = tau[cpu].high - tau[cpu].low;
 	if (size > min_window && ! tau[cpu].grew) {
 		/* do an exponential shrink of half the amount currently over size */
@@ -164,18 +153,12 @@ static void tau_timeout(void * info)
 
 	set_thresholds(cpu);
 
-	/*
-	 * Do the enable every time, since otherwise a bunch of (relatively)
-	 * complex sleep code needs to be added. One mtspr every time
-	 * tau_timeout is called is probably not a big deal.
-	 *
+	/* Restart thermal sensor comparisons and interrupts.
 	 * The "PowerPC 740 and PowerPC 750 Microprocessor Datasheet"
 	 * recommends that "the maximum value be set in THRM3 under all
 	 * conditions."
 	 */
 	mtspr(SPRN_THRM3, THRM3_SITV(0x1fff) | THRM3_E);
-
-	local_irq_restore(flags);
 }
 
 static void tau_timeout_smp(unsigned long unused)
arch/powerpc/platforms/Kconfig +2 -7
index b7f9c408bf24f..0a0281a21ea50 100644
@@ -242,7 +242,7 @@ config TAU
 	  temp is actually what /proc/cpuinfo says it is.
 
 config TAU_INT
-	bool "Interrupt driven TAU driver (DANGEROUS)"
+	bool "Interrupt driven TAU driver (EXPERIMENTAL)"
 	depends on TAU
 	---help---
 	  The TAU supports an interrupt driven mode which causes an interrupt
@@ -250,12 +250,7 @@ config TAU_INT
 	  to get notified the temp has exceeded a range. With this option off,
 	  a timer is used to re-check the temperature periodically.
 
-	  However, on some cpus it appears that the TAU interrupt hardware
-	  is buggy and can cause a situation which would lead unexplained hard
-	  lockups.
-
-	  Unless you are extending the TAU driver, or enjoy kernel/hardware
-	  debugging, leave this option off.
+	  If in doubt, say N here.
 
 config TAU_AVERAGE
 	bool "Average high and low temp"
Signature · 1 line
2.25.1
author maintainer
#62 lore raw

PATCH 62/112 perf intel-pt: Fix "context_switch event has no tid" error

In reply to Greg Kroah-Hartman

From: Adrian Hunter <[email protected]>

[ Upstream commit 7d537a8d2e76bc4fc71e34545ceaa463ac2cd928 ]

A context_switch event can have no tid because pids can be detached from a task while the task is still running (in do_exit()). Note this won't happen with per-task contexts because then tracing stops at perf_event_exit_task()

If a task with no tid gets preempted, or a dying task gets preempted and its parent releases it, when it subsequently gets switched back in, Intel PT will not be able to determine what task is running and prints an error "context_switch event has no tid". However, it is not really an error because the task is in kernel space and the decoder can continue to decode successfully. Fix by changing the error to be only a logged message, and make allowance for tid == -1.

Example:

Using 5.9-rc4 with Preemptible Kernel (Low-Latency Desktop) e.g.

  $ uname -r
  5.9.0-rc4
  $ grep PREEMPT .config
  # CONFIG_PREEMPT_NONE is not set
  # CONFIG_PREEMPT_VOLUNTARY is not set
  CONFIG_PREEMPT=y
  CONFIG_PREEMPT_COUNT=y
  CONFIG_PREEMPTION=y
  CONFIG_PREEMPT_RCU=y
  CONFIG_PREEMPT_NOTIFIERS=y
  CONFIG_DRM_I915_PREEMPT_TIMEOUT=640
  CONFIG_DEBUG_PREEMPT=y
  # CONFIG_PREEMPT_TRACER is not set
  # CONFIG_PREEMPTIRQ_DELAY_TEST is not set

Before:

  $ cat forkit.c
  #include <sys/types.h>
  #include <unistd.h>
  #include <sys/wait.h>

  int main()
  {
          pid_t child;
          int status = 0;
          child = fork();
          if (child == 0)
                  return 123;
          wait(&status);
          return 0;

}

  $ gcc -o forkit forkit.c
  $ sudo ~/bin/perf record --kcore -a -m,64M -e intel_pt/cyc/k &
  [1] 11016
  $ taskset 2 ./forkit
  $ sudo pkill perf
  $ [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 17.262 MB perf.data ]
  [1]+  Terminated              sudo ~/bin/perf record --kcore -a -m,64M -e intel_pt/cyc/k
  $ sudo ~/bin/perf script --show-task-events --show-switch-events --itrace=iqqe-o -C 1 --ns | grep -C 2 forkit
  context_switch event has no tid
           taskset 11019 [001] 66663.270045029:          1 instructions:k:  ffffffffb1d9f844 strnlen_user+0xb4 ([kernel.kallsyms])
           taskset 11019 [001] 66663.270201816:          1 instructions:k:  ffffffffb1a83121 unmap_page_range+0x561 ([kernel.kallsyms])
            forkit 11019 [001] 66663.270327553: PERF_RECORD_COMM exec: forkit:11019/11019
            forkit 11019 [001] 66663.270420028:          1 instructions:k:  ffffffffb1db9537 __clear_user+0x27 ([kernel.kallsyms])
            forkit 11019 [001] 66663.270648704:          1 instructions:k:  ffffffffb18829e6 do_user_addr_fault+0xf6 ([kernel.kallsyms])
            forkit 11019 [001] 66663.270833163:          1 instructions:k:  ffffffffb230a825 irqentry_exit_to_user_mode+0x15 ([kernel.kallsyms])
            forkit 11019 [001] 66663.271092359:          1 instructions:k:  ffffffffb1aea3d9 lock_page_memcg+0x9 ([kernel.kallsyms])
            forkit 11019 [001] 66663.271207092: PERF_RECORD_FORK(11020:11020):(11019:11019)
            forkit 11019 [001] 66663.271234775: PERF_RECORD_SWITCH_CPU_WIDE OUT          next pid/tid: 11020/11020
            forkit 11020 [001] 66663.271238407: PERF_RECORD_SWITCH_CPU_WIDE IN           prev pid/tid: 11019/11019
            forkit 11020 [001] 66663.271312066:          1 instructions:k:  ffffffffb1a88140 handle_mm_fault+0x10 ([kernel.kallsyms])
            forkit 11020 [001] 66663.271476225: PERF_RECORD_EXIT(11020:11020):(11019:11019)
            forkit 11020 [001] 66663.271497488: PERF_RECORD_SWITCH_CPU_WIDE OUT preempt  next pid/tid: 11019/11019
            forkit 11019 [001] 66663.271500523: PERF_RECORD_SWITCH_CPU_WIDE IN           prev pid/tid: 11020/11020
            forkit 11019 [001] 66663.271517241:          1 instructions:k:  ffffffffb24012cd error_entry+0x6d ([kernel.kallsyms])
            forkit 11019 [001] 66663.271664080: PERF_RECORD_EXIT(11019:11019):(1386:1386)

After:

  $ sudo ~/bin/perf script --show-task-events --show-switch-events --itrace=iqqe-o -C 1 --ns | grep -C 2 forkit
           taskset 11019 [001] 66663.270045029:          1 instructions:k:  ffffffffb1d9f844 strnlen_user+0xb4 ([kernel.kallsyms])
           taskset 11019 [001] 66663.270201816:          1 instructions:k:  ffffffffb1a83121 unmap_page_range+0x561 ([kernel.kallsyms])
            forkit 11019 [001] 66663.270327553: PERF_RECORD_COMM exec: forkit:11019/11019
            forkit 11019 [001] 66663.270420028:          1 instructions:k:  ffffffffb1db9537 __clear_user+0x27 ([kernel.kallsyms])
            forkit 11019 [001] 66663.270648704:          1 instructions:k:  ffffffffb18829e6 do_user_addr_fault+0xf6 ([kernel.kallsyms])
            forkit 11019 [001] 66663.270833163:          1 instructions:k:  ffffffffb230a825 irqentry_exit_to_user_mode+0x15 ([kernel.kallsyms])
            forkit 11019 [001] 66663.271092359:          1 instructions:k:  ffffffffb1aea3d9 lock_page_memcg+0x9 ([kernel.kallsyms])
            forkit 11019 [001] 66663.271207092: PERF_RECORD_FORK(11020:11020):(11019:11019)
            forkit 11019 [001] 66663.271234775: PERF_RECORD_SWITCH_CPU_WIDE OUT          next pid/tid: 11020/11020
            forkit 11020 [001] 66663.271238407: PERF_RECORD_SWITCH_CPU_WIDE IN           prev pid/tid: 11019/11019
            forkit 11020 [001] 66663.271312066:          1 instructions:k:  ffffffffb1a88140 handle_mm_fault+0x10 ([kernel.kallsyms])
            forkit 11020 [001] 66663.271476225: PERF_RECORD_EXIT(11020:11020):(11019:11019)
            forkit 11020 [001] 66663.271497488: PERF_RECORD_SWITCH_CPU_WIDE OUT preempt  next pid/tid: 11019/11019
            forkit 11019 [001] 66663.271500523: PERF_RECORD_SWITCH_CPU_WIDE IN           prev pid/tid: 11020/11020
            forkit 11019 [001] 66663.271517241:          1 instructions:k:  ffffffffb24012cd error_entry+0x6d ([kernel.kallsyms])
            forkit 11019 [001] 66663.271664080: PERF_RECORD_EXIT(11019:11019):(1386:1386)
            forkit 11019 [001] 66663.271688752: PERF_RECORD_SWITCH_CPU_WIDE OUT          next pid/tid:    -1/-1
               :-1    -1 [001] 66663.271692086: PERF_RECORD_SWITCH_CPU_WIDE IN           prev pid/tid: 11019/11019
                :-1    -1 [001] 66663.271707466:          1 instructions:k:  ffffffffb18eb096 update_load_avg+0x306 ([kernel.kallsyms])
Fixes 86c2786994bd7c ("perf intel-pt: Add support for PERF_RECORD_SWITCH")
Cc Andi Kleen <[email protected]>
Cc Jiri Olsa <[email protected]>
Cc Yu-cheng Yu <[email protected]>
---
 tools/perf/util/intel-pt.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
tools/perf/util/intel-pt.c +4 -4
index c8f2d084a8ce3..be5a7c1b36ff3 100644
@@ -794,6 +794,8 @@ static void intel_pt_set_pid_tid_cpu(struct intel_pt *pt,
 
 	if (queue->tid == -1 || pt->have_sched_switch) {
 		ptq->tid = machine__get_current_tid(pt->machine, ptq->cpu);
+		if (ptq->tid == -1)
+			ptq->pid = -1;
 		thread__zput(ptq->thread);
 	}
 
@@ -1634,10 +1636,8 @@ static int intel_pt_context_switch(struct intel_pt *pt, union perf_event *event,
 		tid = sample->tid;
 	}
 
-	if (tid == -1) {
-		pr_err("context_switch event has no tid\n");
-		return -EINVAL;
-	}
+	if (tid == -1)
+		intel_pt_log("context_switch event has no tid\n");
 
 	intel_pt_log("context_switch: cpu %d pid %d tid %d time %"PRIu64" tsc %#"PRIx64"\n",
 		     cpu, pid, tid, sample->time, perf_time_to_tsc(sample->time,
Signature · 1 line
2.25.1
author maintainer
#63 lore raw

PATCH 63/112 kdb: Fix pager search for multi-line strings

In reply to Greg Kroah-Hartman

From: Daniel Thompson <[email protected]>

[ Upstream commit d081a6e353168f15e63eb9e9334757f20343319f ]

Currently using forward search doesn't handle multi-line strings correctly. The search routine replaces line breaks with \0 during the search and, for regular searches ("help | grep Common\n"), there is code after the line has been discarded or printed to replace the break character.

However during a pager search ("help\n" followed by "/Common\n") when the string is matched we will immediately return to normal output and the code that should restore the \n becomes unreachable. Fix this by restoring the replaced character when we disable the search mode and update the comment accordingly.

Fixes fb6daa7520f9d ("kdb: Provide forward search at more prompt")
---
 kernel/debug/kdb/kdb_io.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)
kernel/debug/kdb/kdb_io.c +6 -2
index cc892a9e109d8..ae39b014b7d6c 100644
@@ -683,12 +683,16 @@ int vkdb_printf(enum kdb_msgsrc src, const char *fmt, va_list ap)
 			size_avail = sizeof(kdb_buffer) - len;
 			goto kdb_print_out;
 		}
-		if (kdb_grepping_flag >= KDB_GREPPING_FLAG_SEARCH)
+		if (kdb_grepping_flag >= KDB_GREPPING_FLAG_SEARCH) {
 			/*
 			 * This was a interactive search (using '/' at more
-			 * prompt) and it has completed. Clear the flag.
+			 * prompt) and it has completed. Replace the \0 with
+			 * its original value to ensure multi-line strings
+			 * are handled properly, and return to normal mode.
 			 */
+			*cphold = replaced_byte;
 			kdb_grepping_flag = 0;
+		}
 		/*
 		 * at this point the string is a full line and
 		 * should be printed, up to the null.
Signature · 1 line
2.25.1
author maintainer
#64 lore raw

PATCH 64/112 powerpc/perf/hv-gpci: Fix starting index value

In reply to Greg Kroah-Hartman

From: Kajol Jain <[email protected]>

[ Upstream commit 0f9866f7e85765bbda86666df56c92f377c3bc10 ]

Commit 9e9f60108423f ("powerpc/perf/{hv-gpci, hv-common}: generate requests with counters annotated") adds a framework for defining gpci counters.
In this patch, they adds starting_index value as '0xffffffffffffffff'. which is wrong as starting_index is of size 32 bits.

Because of this, incase we try to run hv-gpci event we get error.

In power9 machine:

command#: perf stat -e hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/

          -C 0 -I 1000
event syntax error: '..bie_count_and_time_tlbie_instructions_issued/'
                                  \___ value too big for format, maximum is 4294967295

This patch fix this issue and changes starting_index value to '0xffffffff'

After this patch:

command#: perf stat -e hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/ -C 0 -I 1000

     1.000085786              1,024      hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/
     2.000287818              1,024      hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/
     2.439113909             17,408      hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/
Fixes 9e9f60108423 ("powerpc/perf/{hv-gpci, hv-common}: generate requests with counters annotated")
---
 arch/powerpc/perf/hv-gpci-requests.h | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
arch/powerpc/perf/hv-gpci-requests.h +3 -3
index acd17648cd188..5ea24d16a74a1 100644
@@ -94,7 +94,7 @@ REQUEST(__field(0,	8,	partition_id)
 
 #define REQUEST_NAME system_performance_capabilities
 #define REQUEST_NUM 0x40
-#define REQUEST_IDX_KIND "starting_index=0xffffffffffffffff"
+#define REQUEST_IDX_KIND "starting_index=0xffffffff"
 #include I(REQUEST_BEGIN)
 REQUEST(__field(0,	1,	perf_collect_privileged)
 	__field(0x1,	1,	capability_mask)
@@ -222,7 +222,7 @@ REQUEST(__field(0,	2, partition_id)
 
 #define REQUEST_NAME system_hypervisor_times
 #define REQUEST_NUM 0xF0
-#define REQUEST_IDX_KIND "starting_index=0xffffffffffffffff"
+#define REQUEST_IDX_KIND "starting_index=0xffffffff"
 #include I(REQUEST_BEGIN)
 REQUEST(__count(0,	8,	time_spent_to_dispatch_virtual_processors)
 	__count(0x8,	8,	time_spent_processing_virtual_processor_timers)
@@ -233,7 +233,7 @@ REQUEST(__count(0,	8,	time_spent_to_dispatch_virtual_processors)
 
 #define REQUEST_NAME system_tlbie_count_and_time
 #define REQUEST_NUM 0xF4
-#define REQUEST_IDX_KIND "starting_index=0xffffffffffffffff"
+#define REQUEST_IDX_KIND "starting_index=0xffffffff"
 #include I(REQUEST_BEGIN)
 REQUEST(__count(0,	8,	tlbie_instructions_issued)
 	/*
Signature · 1 line
2.25.1
author maintainer
#65 lore raw

PATCH 65/112 cpufreq: powernv: Fix frame-size-overflow in powernv_cpufreq_reboot_notifier

In reply to Greg Kroah-Hartman

From: Srikar Dronamraju <[email protected]>

[ Upstream commit a2d0230b91f7e23ceb5d8fb6a9799f30517ec33a ]

The patch avoids allocating cpufreq_policy on stack hence fixing frame size overflow in 'powernv_cpufreq_reboot_notifier':

drivers/cpufreq/powernv-cpufreq.c: In function powernv_cpufreq_reboot_notifier:
drivers/cpufreq/powernv-cpufreq.c:906:1: error: the frame size of 2064 bytes is larger than 2048 bytes

Fixes cf30af76 ("cpufreq: powernv: Set the cpus to nominal frequency during reboot/kexec")
---
 drivers/cpufreq/powernv-cpufreq.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)
drivers/cpufreq/powernv-cpufreq.c +6 -3
index 57e6c45724e73..1930a1d1a1892 100644
@@ -410,12 +410,15 @@ static int powernv_cpufreq_reboot_notifier(struct notifier_block *nb,
 				unsigned long action, void *unused)
 {
 	int cpu;
-	struct cpufreq_policy cpu_policy;
+	struct cpufreq_policy *cpu_policy;
 
 	rebooting = true;
 	for_each_online_cpu(cpu) {
-		cpufreq_get_policy(&cpu_policy, cpu);
-		powernv_cpufreq_target_index(&cpu_policy, get_nominal_index());
+		cpu_policy = cpufreq_cpu_get(cpu);
+		if (!cpu_policy)
+			continue;
+		powernv_cpufreq_target_index(cpu_policy, get_nominal_index());
+		cpufreq_cpu_put(cpu_policy);
 	}
 
 	return NOTIFY_DONE;
Signature · 1 line
2.25.1
author maintainer
#66 lore raw

PATCH 66/112 lib/crc32.c: fix trivial typo in preprocessor condition

In reply to Greg Kroah-Hartman

From: Tobias Jordan <[email protected]>

[ Upstream commit 904542dc56524f921a6bab0639ff6249c01e775f ]

Whether crc32_be needs a lookup table is chosen based on CRC_LE_BITS. Obviously, the _be function should be governed by the _BE_ define.

This probably never pops up as it's hard to come up with a configuration where CRC_BE_BITS isn't the same as CRC_LE_BITS and as nobody is using bitwise CRC anyway.

Fixes 46c5801eaf86 ("crc32: bolt on crc32c")
Cc Krzysztof Kozlowski <[email protected]>
Cc Jonathan Corbet <[email protected]>
Cc Mauro Carvalho Chehab <[email protected]>
---
 lib/crc32.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
lib/crc32.c +1 -1
index 9a907d489d951..eed675bcd6751 100644
@@ -327,7 +327,7 @@ static inline u32 __pure crc32_be_generic(u32 crc, unsigned char const *p,
 	return crc;
 }
 
-#if CRC_LE_BITS == 1
+#if CRC_BE_BITS == 1
 u32 __pure crc32_be(u32 crc, unsigned char const *p, size_t len)
 {
 	return crc32_be_generic(crc, p, len, NULL, CRCPOLY_BE);
Signature · 1 line
2.25.1
author maintainer
#67 lore raw

PATCH 67/112 vfio/pci: Clear token on bypass registration failure

In reply to Greg Kroah-Hartman

From: Alex Williamson <[email protected]>

[ Upstream commit 852b1beecb6ff9326f7ca4bc0fe69ae860ebdb9e ]

The eventfd context is used as our irqbypass token, therefore if an eventfd is re-used, our token is the same. The irqbypass code will return an -EBUSY in this case, but we'll still attempt to unregister the producer, where if that duplicate token still exists, results in removing the wrong object. Clear the token of failed producers so that they harmlessly fall out when unregistered.

Fixes 6d7425f109d2 ("vfio: Register/unregister irq_bypass_producer")
---
 drivers/vfio/pci/vfio_pci_intrs.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/vfio/pci/vfio_pci_intrs.c +3 -1
index f7d48661aa944..af4f7ebb45a79 100644
@@ -364,11 +364,13 @@ static int vfio_msi_set_vector_signal(struct vfio_pci_device *vdev,
 	vdev->ctx[vector].producer.token = trigger;
 	vdev->ctx[vector].producer.irq = irq;
 	ret = irq_bypass_register_producer(&vdev->ctx[vector].producer);
-	if (unlikely(ret))
+	if (unlikely(ret)) {
 		dev_info(&pdev->dev,
 		"irq bypass producer (token %p) registration fails: %d\n",
 		vdev->ctx[vector].producer.token, ret);
 
+		vdev->ctx[vector].producer.token = NULL;
+	}
 	vdev->ctx[vector].trigger = trigger;
 
 	return 0;
Signature · 1 line
2.25.1
author maintainer
#68 lore raw

PATCH 68/112 Input: imx6ul_tsc - clean up some errors in imx6ul_tsc_resume()

In reply to Greg Kroah-Hartman

From: Dan Carpenter <[email protected]>

[ Upstream commit 30df23c5ecdfb8da5b0bc17ceef67eff9e1b0957 ]

If imx6ul_tsc_init() fails then we need to clean up the clocks.

I reversed the "if (input_dev->users) {" condition to make the code a bit simpler.

---
 drivers/input/touchscreen/imx6ul_tsc.c | 27 +++++++++++++++-----------
 1 file changed, 16 insertions(+), 11 deletions(-)
drivers/input/touchscreen/imx6ul_tsc.c +16 -11
index 8275267eac254..4be7ddc04af0f 100644
@@ -490,20 +490,25 @@ static int __maybe_unused imx6ul_tsc_resume(struct device *dev)
 
 	mutex_lock(&input_dev->mutex);
 
-	if (input_dev->users) {
-		retval = clk_prepare_enable(tsc->adc_clk);
-		if (retval)
-			goto out;
-
-		retval = clk_prepare_enable(tsc->tsc_clk);
-		if (retval) {
-			clk_disable_unprepare(tsc->adc_clk);
-			goto out;
-		}
+	if (!input_dev->users)
+		goto out;
 
-		retval = imx6ul_tsc_init(tsc);
+	retval = clk_prepare_enable(tsc->adc_clk);
+	if (retval)
+		goto out;
+
+	retval = clk_prepare_enable(tsc->tsc_clk);
+	if (retval) {
+		clk_disable_unprepare(tsc->adc_clk);
+		goto out;
 	}
 
+	retval = imx6ul_tsc_init(tsc);
+	if (retval) {
+		clk_disable_unprepare(tsc->tsc_clk);
+		clk_disable_unprepare(tsc->adc_clk);
+		goto out;
+	}
 out:
 	mutex_unlock(&input_dev->mutex);
 	return retval;
Signature · 1 line
2.25.1
author maintainer
#69 lore raw

PATCH 69/112 Input: ep93xx_keypad - fix handling of platform_get_irq() error

In reply to Greg Kroah-Hartman

From: Krzysztof Kozlowski <[email protected]>

[ Upstream commit 7d50f6656dacf085a00beeedbc48b19a37d17881 ]

platform_get_irq() returns -ERRNO on error. In such case comparison to 0 would pass the check.

Fixes 60214f058f44 ("Input: ep93xx_keypad - update driver to new core support")
---
 drivers/input/keyboard/ep93xx_keypad.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/input/keyboard/ep93xx_keypad.c +2 -2
index f77b295e0123e..01788a78041b3 100644
@@ -257,8 +257,8 @@ static int ep93xx_keypad_probe(struct platform_device *pdev)
 	}
 
 	keypad->irq = platform_get_irq(pdev, 0);
-	if (!keypad->irq) {
-		err = -ENXIO;
+	if (keypad->irq < 0) {
+		err = keypad->irq;
 		goto failed_free;
 	}
 
Signature · 1 line
2.25.1
author maintainer
#70 lore raw

PATCH 70/112 Input: omap4-keypad - fix handling of platform_get_irq() error

In reply to Greg Kroah-Hartman

From: Krzysztof Kozlowski <[email protected]>

[ Upstream commit 4738dd1992fa13acfbbd71800c71c612f466fa44 ]

platform_get_irq() returns -ERRNO on error. In such case comparison to 0 would pass the check.

Fixes f3a1ba60dbdb ("Input: omap4-keypad - use platform device helpers")
---
 drivers/input/keyboard/omap4-keypad.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)
drivers/input/keyboard/omap4-keypad.c +2 -4
index 3d2c60c8de830..c6a468dfdfb48 100644
@@ -253,10 +253,8 @@ static int omap4_keypad_probe(struct platform_device *pdev)
 	}
 
 	irq = platform_get_irq(pdev, 0);
-	if (!irq) {
-		dev_err(&pdev->dev, "no keyboard irq assigned\n");
-		return -EINVAL;
-	}
+	if (irq < 0)
+		return irq;
 
 	keypad_data = kzalloc(sizeof(struct omap4_keypad), GFP_KERNEL);
 	if (!keypad_data) {
Signature · 1 line
2.25.1
author maintainer
#71 lore raw

PATCH 71/112 Input: sun4i-ps2 - fix handling of platform_get_irq() error

In reply to Greg Kroah-Hartman

From: Krzysztof Kozlowski <[email protected]>

[ Upstream commit cafb3abea6136e59ea534004e5773361e196bb94 ]

platform_get_irq() returns -ERRNO on error. In such case comparison to 0 would pass the check.

Fixes e443631d20f5 ("Input: serio - add support for Alwinner A10/A20 PS/2 controller")
---
 drivers/input/serio/sun4i-ps2.c | 9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)
drivers/input/serio/sun4i-ps2.c +3 -6
index 04b96fe393397..46512b4d686a8 100644
@@ -210,7 +210,6 @@ static int sun4i_ps2_probe(struct platform_device *pdev)
 	struct sun4i_ps2data *drvdata;
 	struct serio *serio;
 	struct device *dev = &pdev->dev;
-	unsigned int irq;
 	int error;
 
 	drvdata = kzalloc(sizeof(struct sun4i_ps2data), GFP_KERNEL);
@@ -263,14 +262,12 @@ static int sun4i_ps2_probe(struct platform_device *pdev)
 	writel(0, drvdata->reg_base + PS2_REG_GCTL);
 
 	/* Get IRQ for the device */
-	irq = platform_get_irq(pdev, 0);
-	if (!irq) {
-		dev_err(dev, "no IRQ found\n");
-		error = -ENXIO;
+	drvdata->irq = platform_get_irq(pdev, 0);
+	if (drvdata->irq < 0) {
+		error = drvdata->irq;
 		goto err_disable_clk;
 	}
 
-	drvdata->irq = irq;
 	drvdata->serio = serio;
 	drvdata->dev = dev;
 
Signature · 1 line
2.25.1
author maintainer
#72 lore raw

PATCH 72/112 KVM: x86: emulating RDPID failure shall return #UD rather than #GP

In reply to Greg Kroah-Hartman

From: Robert Hoo <[email protected]>

[ Upstream commit a9e2e0ae686094571378c72d8146b5a1a92d0652 ]

Per Intel's SDM, RDPID takes a #UD if it is unsupported, which is more or less what KVM is emulating when MSR_TSC_AUX is not available. In fact, there are no scenarios in which RDPID is supposed to #GP.

Fixes fb6d4d340e ("KVM: x86: emulate RDPID")

Message-Id: <[email protected]>

---
 arch/x86/kvm/emulate.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/x86/kvm/emulate.c +1 -1
index 466028623e1a0..0c1e249a7ab69 100644
@@ -3524,7 +3524,7 @@ static int em_rdpid(struct x86_emulate_ctxt *ctxt)
 	u64 tsc_aux = 0;
 
 	if (ctxt->ops->get_msr(ctxt, MSR_TSC_AUX, &tsc_aux))
-		return emulate_gp(ctxt, 0);
+		return emulate_ud(ctxt);
 	ctxt->dst.val = tsc_aux;
 	return X86EMUL_CONTINUE;
 }
Signature · 1 line
2.25.1
author maintainer
#73 lore raw

PATCH 73/112 memory: omap-gpmc: Fix a couple off by ones

In reply to Greg Kroah-Hartman

From: Dan Carpenter <[email protected]>

[ Upstream commit 4c54228ac8fd55044195825873c50a524131fa53 ]

These comparisons should be >= instead of > to prevent reading one element beyond the end of the gpmc_cs[] array.

Fixes cdd6928c589a ("ARM: OMAP2+: Add device-tree support for NOR flash")
Fixes f37e4580c409 ("ARM: OMAP2: Dynamic allocator for GPMC memory space")
---
 drivers/memory/omap-gpmc.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/memory/omap-gpmc.c +2 -2
index 49691a8c74ee9..af187c91fc33b 100644
@@ -928,7 +928,7 @@ static int gpmc_cs_remap(int cs, u32 base)
 	int ret;
 	u32 old_base, size;
 
-	if (cs > gpmc_cs_num) {
+	if (cs >= gpmc_cs_num) {
 		pr_err("%s: requested chip-select is disabled\n", __func__);
 		return -ENODEV;
 	}
@@ -963,7 +963,7 @@ int gpmc_cs_request(int cs, unsigned long size, unsigned long *base)
 	struct resource *res = &gpmc->mem;
 	int r = -1;
 
-	if (cs > gpmc_cs_num) {
+	if (cs >= gpmc_cs_num) {
 		pr_err("%s: requested chip-select is disabled\n", __func__);
 		return -ENODEV;
 	}
Signature · 1 line
2.25.1
author maintainer
#74 lore raw

PATCH 74/112 memory: fsl-corenet-cf: Fix handling of platform_get_irq() error

In reply to Greg Kroah-Hartman

From: Krzysztof Kozlowski <[email protected]>

[ Upstream commit dd85345abca60a8916617e8d75c0f9ce334336dd ]

platform_get_irq() returns -ERRNO on error. In such case comparison to 0 would pass the check.

Fixes 54afbec0d57f ("memory: Freescale CoreNet Coherency Fabric error reporting driver")
---
 drivers/memory/fsl-corenet-cf.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)
drivers/memory/fsl-corenet-cf.c +2 -4
index 662d050243bec..2fbf8d09af36b 100644
@@ -215,10 +215,8 @@ static int ccf_probe(struct platform_device *pdev)
 	dev_set_drvdata(&pdev->dev, ccf);
 
 	irq = platform_get_irq(pdev, 0);
-	if (!irq) {
-		dev_err(&pdev->dev, "%s: no irq\n", __func__);
-		return -ENXIO;
-	}
+	if (irq < 0)
+		return irq;
 
 	ret = devm_request_irq(&pdev->dev, irq, ccf_irq, 0, pdev->name, ccf);
 	if (ret) {
Signature · 1 line
2.25.1
author maintainer
#75 lore raw

PATCH 75/112 arm64: dts: zynqmp: Remove additional compatible string for i2c IPs

In reply to Greg Kroah-Hartman

From: Michal Simek <[email protected]>

[ Upstream commit 35292518cb0a626fcdcabf739aed75060a018ab5 ]

DT binding permits only one compatible string which was decribed in past by commit 63cab195bf49 ("i2c: removed work arounds in i2c driver for Zynq Ultrascale+ MPSoC").
The commit aea37006e183 ("dt-bindings: i2c: cadence: Migrate i2c-cadence documentation to YAML") has converted binding to yaml and the following issues is reported:
...: i2c@ff030000: compatible: Additional items are not allowed ('cdns,i2c-r1p10' was unexpected)
From schema:
.../Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml fds ...: i2c@ff030000: compatible: ['cdns,i2c-r1p14', 'cdns,i2c-r1p10'] is too long

The commit c415f9e8304a ("ARM64: zynqmp: Fix i2c node's compatible string") has added the second compatible string but without removing origin one. The patch is only keeping one compatible string "cdns,i2c-r1p14".

---
 arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
arch/arm64/boot/dts/xilinx/zynqmp.dtsi +2 -2
index 172402cc1a0f5..ae2cbbdb634e4 100644
@@ -191,7 +191,7 @@ i2c_clk: i2c_clk {
 		};
 
 		i2c0: i2c@ff020000 {
-			compatible = "cdns,i2c-r1p14", "cdns,i2c-r1p10";
+			compatible = "cdns,i2c-r1p14";
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 17 4>;
@@ -202,7 +202,7 @@ i2c0: i2c@ff020000 {
 		};
 
 		i2c1: i2c@ff030000 {
-			compatible = "cdns,i2c-r1p14", "cdns,i2c-r1p10";
+			compatible = "cdns,i2c-r1p14";
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 18 4>;
Signature · 1 line
2.25.1
author maintainer
#76 lore raw

PATCH 76/112 powerpc/powernv/dump: Fix race while processing OPAL dump

In reply to Greg Kroah-Hartman

From: Vasant Hegde <[email protected]>

[ Upstream commit 0a43ae3e2beb77e3481d812834d33abe270768ab ]

Every dump reported by OPAL is exported to userspace through a sysfs interface and notified using kobject_uevent(). The userspace daemon (opal_errd) then reads the dump and acknowledges that the dump is saved safely to disk. Once acknowledged the kernel removes the respective sysfs file entry causing respective resources to be released including kobject.

However it's possible the userspace daemon may already be scanning dump entries when a new sysfs dump entry is created by the kernel. User daemon may read this new entry and ack it even before kernel can notify userspace about it through kobject_uevent() call. If that happens then we have a potential race between dump_ack_store->kobject_put() and kobject_uevent which can lead to use-after-free of a kernfs object resulting in a kernel crash.

This patch fixes this race by protecting the sysfs file creation/notification by holding a reference count on kobject until we safely send kobject_uevent().

The function create_dump_obj() returns the dump object which if used by caller function will end up in use-after-free problem again. However, the return value of create_dump_obj() function isn't being used today and there is no need as well. Hence change it to return void to make this fix complete.

Fixes c7e64b9ce04a ("powerpc/powernv Platform dump interface")
---
 arch/powerpc/platforms/powernv/opal-dump.c | 41 +++++++++++++++-------
 1 file changed, 29 insertions(+), 12 deletions(-)
arch/powerpc/platforms/powernv/opal-dump.c +29 -12
index 4c827826c05eb..e21e2c0af69d2 100644
@@ -319,15 +319,14 @@ static ssize_t dump_attr_read(struct file *filep, struct kobject *kobj,
 	return count;
 }
 
-static struct dump_obj *create_dump_obj(uint32_t id, size_t size,
-					uint32_t type)
+static void create_dump_obj(uint32_t id, size_t size, uint32_t type)
 {
 	struct dump_obj *dump;
 	int rc;
 
 	dump = kzalloc(sizeof(*dump), GFP_KERNEL);
 	if (!dump)
-		return NULL;
+		return;
 
 	dump->kobj.kset = dump_kset;
 
@@ -347,21 +346,39 @@ static struct dump_obj *create_dump_obj(uint32_t id, size_t size,
 	rc = kobject_add(&dump->kobj, NULL, "0x%x-0x%x", type, id);
 	if (rc) {
 		kobject_put(&dump->kobj);
-		return NULL;
+		return;
 	}
 
+	/*
+	 * As soon as the sysfs file for this dump is created/activated there is
+	 * a chance the opal_errd daemon (or any userspace) might read and
+	 * acknowledge the dump before kobject_uevent() is called. If that
+	 * happens then there is a potential race between
+	 * dump_ack_store->kobject_put() and kobject_uevent() which leads to a
+	 * use-after-free of a kernfs object resulting in a kernel crash.
+	 *
+	 * To avoid that, we need to take a reference on behalf of the bin file,
+	 * so that our reference remains valid while we call kobject_uevent().
+	 * We then drop our reference before exiting the function, leaving the
+	 * bin file to drop the last reference (if it hasn't already).
+	 */
+
+	/* Take a reference for the bin file */
+	kobject_get(&dump->kobj);
 	rc = sysfs_create_bin_file(&dump->kobj, &dump->dump_attr);
-	if (rc) {
+	if (rc == 0) {
+		kobject_uevent(&dump->kobj, KOBJ_ADD);
+
+		pr_info("%s: New platform dump. ID = 0x%x Size %u\n",
+			__func__, dump->id, dump->size);
+	} else {
+		/* Drop reference count taken for bin file */
 		kobject_put(&dump->kobj);
-		return NULL;
 	}
 
-	pr_info("%s: New platform dump. ID = 0x%x Size %u\n",
-		__func__, dump->id, dump->size);
-
-	kobject_uevent(&dump->kobj, KOBJ_ADD);
-
-	return dump;
+	/* Drop our reference */
+	kobject_put(&dump->kobj);
+	return;
 }
 
 static irqreturn_t process_dump(int irq, void *data)
Signature · 1 line
2.25.1
author maintainer
#77 lore raw

PATCH 77/112 media: firewire: fix memory leak

In reply to Greg Kroah-Hartman

From: Pavel Machek <[email protected]>

[ Upstream commit b28e32798c78a346788d412f1958f36bb760ec03 ]

Fix memory leak in node_probe.

---
 drivers/media/firewire/firedtv-fw.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
drivers/media/firewire/firedtv-fw.c +4 -2
index 5d634706a7eaa..382f290c3f4d5 100644
@@ -271,8 +271,10 @@ static int node_probe(struct fw_unit *unit, const struct ieee1394_device_id *id)
 
 	name_len = fw_csr_string(unit->directory, CSR_MODEL,
 				 name, sizeof(name));
-	if (name_len < 0)
-		return name_len;
+	if (name_len < 0) {
+		err = name_len;
+		goto fail_free;
+	}
 	for (i = ARRAY_SIZE(model_names); --i; )
 		if (strlen(model_names[i]) <= name_len &&
 		    strncmp(name, model_names[i], name_len) == 0)
Signature · 1 line
2.25.1
author maintainer
#78 lore raw

PATCH 78/112 media: ati_remote: sanity check for both endpoints

In reply to Greg Kroah-Hartman

From: Oliver Neukum <[email protected]>

[ Upstream commit a8be80053ea74bd9c3f9a3810e93b802236d6498 ]

If you do sanity checks, you should do them for both endpoints. Hence introduce checking for endpoint type for the output endpoint, too.

---
 drivers/media/rc/ati_remote.c | 4 ++++
 1 file changed, 4 insertions(+)
drivers/media/rc/ati_remote.c +4 -0
index a35631891cc00..3c3f4c4f6be40 100644
@@ -843,6 +843,10 @@ static int ati_remote_probe(struct usb_interface *interface,
 		err("%s: endpoint_in message size==0? \n", __func__);
 		return -ENODEV;
 	}
+	if (!usb_endpoint_is_int_out(endpoint_out)) {
+		err("%s: Unexpected endpoint_out\n", __func__);
+		return -ENODEV;
+	}
 
 	ati_remote = kzalloc(sizeof (struct ati_remote), GFP_KERNEL);
 	rc_dev = rc_allocate_device();
Signature · 1 line
2.25.1
author maintainer
#79 lore raw

PATCH 79/112 media: exynos4-is: Fix several reference count leaks due to pm_runtime_get_sync

In reply to Greg Kroah-Hartman

From: Qiushi Wu <[email protected]>

[ Upstream commit 7ef64ceea0008c17e94a8a2c60c5d6d46f481996 ]

On calling pm_runtime_get_sync() the reference count of the device is incremented. In case of failure, decrement the reference count before returning the error.

---
 drivers/media/platform/exynos4-is/fimc-isp.c  | 4 +++-
 drivers/media/platform/exynos4-is/fimc-lite.c | 2 +-
 2 files changed, 4 insertions(+), 2 deletions(-)
drivers/media/platform/exynos4-is/fimc-isp.c +3 -1
index 5d78f5716f3b8..ad280c5258b34 100644
@@ -311,8 +311,10 @@ static int fimc_isp_subdev_s_power(struct v4l2_subdev *sd, int on)
 
 	if (on) {
 		ret = pm_runtime_get_sync(&is->pdev->dev);
-		if (ret < 0)
+		if (ret < 0) {
+			pm_runtime_put(&is->pdev->dev);
 			return ret;
+		}
 		set_bit(IS_ST_PWR_ON, &is->state);
 
 		ret = fimc_is_start_firmware(is);
drivers/media/platform/exynos4-is/fimc-lite.c +1 -1
index 60660c3a5de0d..65b33470a1b1b 100644
@@ -487,7 +487,7 @@ static int fimc_lite_open(struct file *file)
 	set_bit(ST_FLITE_IN_USE, &fimc->state);
 	ret = pm_runtime_get_sync(&fimc->pdev->dev);
 	if (ret < 0)
-		goto unlock;
+		goto err_pm;
 
 	ret = v4l2_fh_open(file);
 	if (ret < 0)
Signature · 1 line
2.25.1
author maintainer
#80 lore raw

PATCH 80/112 media: exynos4-is: Fix a reference count leak due to pm_runtime_get_sync

In reply to Greg Kroah-Hartman

From: Qiushi Wu <[email protected]>

[ Upstream commit c47f7c779ef0458a58583f00c9ed71b7f5a4d0a2 ]

On calling pm_runtime_get_sync() the reference count of the device is incremented. In case of failure, decrement the reference count before returning the error.

---
 drivers/media/platform/exynos4-is/media-dev.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/media/platform/exynos4-is/media-dev.c +3 -1
index 6bc3c8a2e1443..76fadd3e3ada2 100644
@@ -413,8 +413,10 @@ static int fimc_md_register_sensor_entities(struct fimc_md *fmd)
 		return -ENXIO;
 
 	ret = pm_runtime_get_sync(fmd->pmf);
-	if (ret < 0)
+	if (ret < 0) {
+		pm_runtime_put(fmd->pmf);
 		return ret;
+	}
 
 	fmd->num_sensors = 0;
 
Signature · 1 line
2.25.1
author maintainer
#81 lore raw

PATCH 81/112 media: exynos4-is: Fix a reference count leak

In reply to Greg Kroah-Hartman

From: Qiushi Wu <[email protected]>

[ Upstream commit 64157b2cb1940449e7df2670e85781c690266588 ]

pm_runtime_get_sync() increments the runtime PM usage counter even when it returns an error code, causing incorrect ref count if pm_runtime_put_noidle() is not called in error handling paths. Thus call pm_runtime_put_noidle() if pm_runtime_get_sync() fails.

---
 drivers/media/platform/exynos4-is/mipi-csis.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/media/platform/exynos4-is/mipi-csis.c +3 -1
index 4b85105dc159b..4f7a0f59f36c2 100644
@@ -513,8 +513,10 @@ static int s5pcsis_s_stream(struct v4l2_subdev *sd, int enable)
 	if (enable) {
 		s5pcsis_clear_counters(state);
 		ret = pm_runtime_get_sync(&state->pdev->dev);
-		if (ret && ret != 1)
+		if (ret && ret != 1) {
+			pm_runtime_put_noidle(&state->pdev->dev);
 			return ret;
+		}
 	}
 
 	mutex_lock(&state->lock);
Signature · 1 line
2.25.1
author maintainer
#82 lore raw

PATCH 82/112 media: bdisp: Fix runtime PM imbalance on error

In reply to Greg Kroah-Hartman

From: Dinghao Liu <[email protected]>

[ Upstream commit dbd2f2dc025f9be8ae063e4f270099677238f620 ]

pm_runtime_get_sync() increments the runtime PM usage counter even when it returns an error code. Thus a pairing decrement is needed on the error handling path to keep the counter balanced.

---
 drivers/media/platform/sti/bdisp/bdisp-v4l2.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
drivers/media/platform/sti/bdisp/bdisp-v4l2.c +1 -2
index a00dfaa1b945d..6c97063cb3b3f 100644
@@ -1369,7 +1369,7 @@ static int bdisp_probe(struct platform_device *pdev)
 	ret = pm_runtime_get_sync(dev);
 	if (ret < 0) {
 		dev_err(dev, "failed to set PM\n");
-		goto err_dbg;
+		goto err_pm;
 	}
 
 	/* Continuous memory allocator */
@@ -1406,7 +1406,6 @@ static int bdisp_probe(struct platform_device *pdev)
 	vb2_dma_contig_cleanup_ctx(bdisp->alloc_ctx);
 err_pm:
 	pm_runtime_put(dev);
-err_dbg:
 	bdisp_debugfs_remove(bdisp);
 err_v4l2:
 	v4l2_device_unregister(&bdisp->v4l2_dev);
Signature · 1 line
2.25.1
author maintainer
#83 lore raw

PATCH 83/112 media: media/pci: prevent memory leak in bttv_probe

In reply to Greg Kroah-Hartman

From: Xiaolong Huang <[email protected]>

[ Upstream commit 7b817585b730665126b45df5508dd69526448bc8 ]

In bttv_probe if some functions such as pci_enable_device, pci_set_dma_mask and request_mem_region fails the allocated
memory for btv should be released.

---
 drivers/media/pci/bt8xx/bttv-driver.c | 13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)
drivers/media/pci/bt8xx/bttv-driver.c +10 -3
index 51dbef2f9a489..10c9c078af014 100644
@@ -4053,11 +4053,13 @@ static int bttv_probe(struct pci_dev *dev, const struct pci_device_id *pci_id)
 	btv->id  = dev->device;
 	if (pci_enable_device(dev)) {
 		pr_warn("%d: Can't enable device\n", btv->c.nr);
-		return -EIO;
+		result = -EIO;
+		goto free_mem;
 	}
 	if (pci_set_dma_mask(dev, DMA_BIT_MASK(32))) {
 		pr_warn("%d: No suitable DMA available\n", btv->c.nr);
-		return -EIO;
+		result = -EIO;
+		goto free_mem;
 	}
 	if (!request_mem_region(pci_resource_start(dev,0),
 				pci_resource_len(dev,0),
@@ -4065,7 +4067,8 @@ static int bttv_probe(struct pci_dev *dev, const struct pci_device_id *pci_id)
 		pr_warn("%d: can't request iomem (0x%llx)\n",
 			btv->c.nr,
 			(unsigned long long)pci_resource_start(dev, 0));
-		return -EBUSY;
+		result = -EBUSY;
+		goto free_mem;
 	}
 	pci_set_master(dev);
 	pci_set_command(dev);
@@ -4251,6 +4254,10 @@ static int bttv_probe(struct pci_dev *dev, const struct pci_device_id *pci_id)
 	release_mem_region(pci_resource_start(btv->c.pci,0),
 			   pci_resource_len(btv->c.pci,0));
 	pci_disable_device(btv->c.pci);
+
+free_mem:
+	bttvs[btv->c.nr] = NULL;
+	kfree(btv);
 	return result;
 }
 
Signature · 1 line
2.25.1
author maintainer
#84 lore raw

PATCH 84/112 media: uvcvideo: Ensure all probed info is returned to v4l2

In reply to Greg Kroah-Hartman

From: Adam Goode <[email protected]>

[ Upstream commit 8a652a17e3c005dcdae31b6c8fdf14382a29cbbe ]

bFrameIndex and bFormatIndex can be negotiated by the camera during probing, resulting in the camera choosing a different format than expected. v4l2 can already accommodate such changes, but the code was not updating the proper fields.

Without such a change, v4l2 would potentially interpret the payload incorrectly, causing corrupted output. This was happening on the Elgato HD60 S+, which currently always renegotiates to format 1.

As an aside, the Elgato firmware is buggy and should not be renegotating, but it is still a valid thing for the camera to do. Both macOS and Windows will properly probe and read uncorrupted images from this camera.

With this change, both qv4l2 and chromium can now read uncorrupted video from the Elgato HD60 S+.

[Add blank lines, remove periods at the of messages]

---
 drivers/media/usb/uvc/uvc_v4l2.c | 30 ++++++++++++++++++++++++++++++
 1 file changed, 30 insertions(+)
drivers/media/usb/uvc/uvc_v4l2.c +30 -0
index 0e7d16fe84d42..a0a544628053d 100644
@@ -242,11 +242,41 @@ static int uvc_v4l2_try_format(struct uvc_streaming *stream,
 	if (ret < 0)
 		goto done;
 
+	/* After the probe, update fmt with the values returned from
+	 * negotiation with the device.
+	 */
+	for (i = 0; i < stream->nformats; ++i) {
+		if (probe->bFormatIndex == stream->format[i].index) {
+			format = &stream->format[i];
+			break;
+		}
+	}
+
+	if (i == stream->nformats) {
+		uvc_trace(UVC_TRACE_FORMAT, "Unknown bFormatIndex %u\n",
+			  probe->bFormatIndex);
+		return -EINVAL;
+	}
+
+	for (i = 0; i < format->nframes; ++i) {
+		if (probe->bFrameIndex == format->frame[i].bFrameIndex) {
+			frame = &format->frame[i];
+			break;
+		}
+	}
+
+	if (i == format->nframes) {
+		uvc_trace(UVC_TRACE_FORMAT, "Unknown bFrameIndex %u\n",
+			  probe->bFrameIndex);
+		return -EINVAL;
+	}
+
 	fmt->fmt.pix.width = frame->wWidth;
 	fmt->fmt.pix.height = frame->wHeight;
 	fmt->fmt.pix.field = V4L2_FIELD_NONE;
 	fmt->fmt.pix.bytesperline = format->bpp * frame->wWidth / 8;
 	fmt->fmt.pix.sizeimage = probe->dwMaxVideoFrameSize;
+	fmt->fmt.pix.pixelformat = format->fcc;
 	fmt->fmt.pix.colorspace = format->colorspace;
 	fmt->fmt.pix.priv = 0;
 
Signature · 1 line
2.25.1
author maintainer
#85 lore raw

PATCH 85/112 mmc: sdio: Check for CISTPL_VERS_1 buffer size

In reply to Greg Kroah-Hartman

From: Pali Rohár <[email protected]>

[ Upstream commit 8ebe2607965d3e2dc02029e8c7dd35fbe508ffd0 ]

Before parsing CISTPL_VERS_1 structure check that its size is at least two bytes to prevent buffer overflow.

---
 drivers/mmc/core/sdio_cis.c | 3 +++
 1 file changed, 3 insertions(+)
drivers/mmc/core/sdio_cis.c +3 -0
index 8e94e555b788d..8651bd30863d4 100644
@@ -30,6 +30,9 @@ static int cistpl_vers_1(struct mmc_card *card, struct sdio_func *func,
 	unsigned i, nr_strings;
 	char **buffer, *string;
 
+	if (size < 2)
+		return 0;
+
 	/* Find all null-terminated (including zero length) strings in
 	   the TPLLV1_INFO field. Trailing garbage is ignored. */
 	buf += 2;
Signature · 1 line
2.25.1
author maintainer
#86 lore raw

PATCH 86/112 media: saa7134: avoid a shift overflow

In reply to Greg Kroah-Hartman

From: Mauro Carvalho Chehab <[email protected]>

[ Upstream commit 15a36aae1ec1c1f17149b6113b92631791830740 ]

As reported by smatch:

	drivers/media/pci/saa7134//saa7134-tvaudio.c:686 saa_dsp_writel() warn: should 'reg << 2' be a 64 bit type?

On a 64-bits Kernel, the shift might be bigger than 32 bits.

In real, this should never happen, but let's shut up the warning.

---
 drivers/media/pci/saa7134/saa7134-tvaudio.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/media/pci/saa7134/saa7134-tvaudio.c +2 -1
index 21a579309575d..02407983ce236 100644
@@ -696,7 +696,8 @@ int saa_dsp_writel(struct saa7134_dev *dev, int reg, u32 value)
 {
 	int err;
 
-	audio_dbg(2, "dsp write reg 0x%x = 0x%06x\n", reg << 2, value);
+	audio_dbg(2, "dsp write reg 0x%x = 0x%06x\n",
+		  (reg << 2) & 0xffffffff, value);
 	err = saa_dsp_wait_bit(dev,SAA7135_DSP_RWSTATE_WRR);
 	if (err < 0)
 		return err;
Signature · 1 line
2.25.1
author maintainer
#87 lore raw

PATCH 87/112 ntfs: add check for mft record size in superblock

In reply to Greg Kroah-Hartman

From: Rustam Kovhaev <[email protected]>

[ Upstream commit 4f8c94022f0bc3babd0a124c0a7dcdd7547bd94e ]

Number of bytes allocated for mft record should be equal to the mft record size stored in ntfs superblock as reported by syzbot, userspace might trigger out-of-bounds read by dereferencing ctx->attr in ntfs_attr_find()

---
 fs/ntfs/inode.c | 6 ++++++
 1 file changed, 6 insertions(+)
fs/ntfs/inode.c +6 -0
index d284f07eda775..38260c07de8b5 100644
@@ -1844,6 +1844,12 @@ int ntfs_read_inode_mount(struct inode *vi)
 		brelse(bh);
 	}
 
+	if (le32_to_cpu(m->bytes_allocated) != vol->mft_record_size) {
+		ntfs_error(sb, "Incorrect mft record size %u in superblock, should be %u.",
+				le32_to_cpu(m->bytes_allocated), vol->mft_record_size);
+		goto err_out;
+	}
+
 	/* Apply the mst fixups. */
 	if (post_read_mst_fixup((NTFS_RECORD*)m, vol->mft_record_size)) {
 		/* FIXME: Try to use the $MFTMirr now. */
Signature · 1 line
2.25.1
author maintainer
#88 lore raw

PATCH 88/112 PM: hibernate: remove the bogus call to get_gendisk() in software_resume()

In reply to Greg Kroah-Hartman

From: Christoph Hellwig <[email protected]>

[ Upstream commit 428805c0c5e76ef643b1fbc893edfb636b3d8aef ]

get_gendisk grabs a reference on the disk and file operation, so this code will leak both of them while having absolutely no use for the gendisk itself.

This effectively reverts commit 2df83fa4bce421f ("PM / Hibernate: Use get_gendisk to verify partition if resume_file is integer format")

---
 kernel/power/hibernate.c | 11 -----------
 1 file changed, 11 deletions(-)
kernel/power/hibernate.c +0 -11
index 3124cebaec31e..7d73b30c55ccd 100644
@@ -779,17 +779,6 @@ static int software_resume(void)
 
 	/* Check if the device is there */
 	swsusp_resume_device = name_to_dev_t(resume_file);
-
-	/*
-	 * name_to_dev_t is ineffective to verify parition if resume_file is in
-	 * integer format. (e.g. major:minor)
-	 */
-	if (isdigit(resume_file[0]) && resume_wait) {
-		int partno;
-		while (!get_gendisk(swsusp_resume_device, &partno))
-			msleep(10);
-	}
-
 	if (!swsusp_resume_device) {
 		/*
 		 * Some device discovery might still be in progress; we need
Signature · 1 line
2.25.1
author maintainer
#89 lore raw

PATCH 89/112 scsi: mvumi: Fix error return in mvumi_io_attach()

In reply to Greg Kroah-Hartman

From: Jing Xiangfeng <[email protected]>

[ Upstream commit 055f15ab2cb4a5cbc4c0a775ef3d0066e0fa9b34 ]

Return PTR_ERR() from the error handling case instead of 0.

---
 drivers/scsi/mvumi.c | 1 +
 1 file changed, 1 insertion(+)
drivers/scsi/mvumi.c +1 -0
index 39285070f3b51..17ec51f9d9880 100644
@@ -2476,6 +2476,7 @@ static int mvumi_io_attach(struct mvumi_hba *mhba)
 	if (IS_ERR(mhba->dm_thread)) {
 		dev_err(&mhba->pdev->dev,
 			"failed to create device scan thread\n");
+		ret = PTR_ERR(mhba->dm_thread);
 		mutex_unlock(&mhba->sas_discovery_mutex);
 		goto fail_create_thread;
 	}
Signature · 1 line
2.25.1
author maintainer
#90 lore raw

PATCH 90/112 scsi: target: core: Add CONTROL field for trace events

In reply to Greg Kroah-Hartman

From: Roman Bolshakov <[email protected]>

[ Upstream commit 7010645ba7256992818b518163f46bd4cdf8002a ]

trace-cmd report doesn't show events from target subsystem because scsi_command_size() leaks through event format string:

[target:target_sequencer_start] function scsi_command_size not defined [target:target_cmd_complete] function scsi_command_size not defined

Addition of scsi_command_size() to plugin_scsi.c in trace-cmd doesn't help because an expression is used inside TP_printk(). trace-cmd event parser doesn't understand minus sign inside [ ]:

Error: expected ']' but read '-'

Rather than duplicating kernel code in plugin_scsi.c, provide a dedicated field for CONTROL byte.

---
 include/scsi/scsi_common.h    |  7 +++++++
 include/trace/events/target.h | 12 ++++++------
 2 files changed, 13 insertions(+), 6 deletions(-)
include/scsi/scsi_common.h +7 -0
index 11571b2a831e3..92ba09200f89b 100644
@@ -24,6 +24,13 @@ scsi_command_size(const unsigned char *cmnd)
 		scsi_varlen_cdb_length(cmnd) : COMMAND_SIZE(cmnd[0]);
 }
 
+static inline unsigned char
+scsi_command_control(const unsigned char *cmnd)
+{
+	return (cmnd[0] == VARIABLE_LENGTH_CMD) ?
+		cmnd[1] : cmnd[COMMAND_SIZE(cmnd[0]) - 1];
+}
+
 /* Returns a human-readable name for the device */
 extern const char *scsi_device_type(unsigned type);
 
include/trace/events/target.h +6 -6
index 50fea660c0f89..d543e8b87e50a 100644
@@ -139,6 +139,7 @@ TRACE_EVENT(target_sequencer_start,
 		__field( unsigned int,	opcode		)
 		__field( unsigned int,	data_length	)
 		__field( unsigned int,	task_attribute  )
+		__field( unsigned char,	control		)
 		__array( unsigned char,	cdb, TCM_MAX_COMMAND_SIZE	)
 		__string( initiator,	cmd->se_sess->se_node_acl->initiatorname	)
 	),
@@ -148,6 +149,7 @@ TRACE_EVENT(target_sequencer_start,
 		__entry->opcode		= cmd->t_task_cdb[0];
 		__entry->data_length	= cmd->data_length;
 		__entry->task_attribute	= cmd->sam_task_attr;
+		__entry->control	= scsi_command_control(cmd->t_task_cdb);
 		memcpy(__entry->cdb, cmd->t_task_cdb, TCM_MAX_COMMAND_SIZE);
 		__assign_str(initiator, cmd->se_sess->se_node_acl->initiatorname);
 	),
@@ -157,9 +159,7 @@ TRACE_EVENT(target_sequencer_start,
 		  show_opcode_name(__entry->opcode),
 		  __entry->data_length, __print_hex(__entry->cdb, 16),
 		  show_task_attribute_name(__entry->task_attribute),
-		  scsi_command_size(__entry->cdb) <= 16 ?
-			__entry->cdb[scsi_command_size(__entry->cdb) - 1] :
-			__entry->cdb[1]
+		  __entry->control
 	)
 );
 
@@ -174,6 +174,7 @@ TRACE_EVENT(target_cmd_complete,
 		__field( unsigned int,	opcode		)
 		__field( unsigned int,	data_length	)
 		__field( unsigned int,	task_attribute  )
+		__field( unsigned char,	control		)
 		__field( unsigned char,	scsi_status	)
 		__field( unsigned char,	sense_length	)
 		__array( unsigned char,	cdb, TCM_MAX_COMMAND_SIZE	)
@@ -186,6 +187,7 @@ TRACE_EVENT(target_cmd_complete,
 		__entry->opcode		= cmd->t_task_cdb[0];
 		__entry->data_length	= cmd->data_length;
 		__entry->task_attribute	= cmd->sam_task_attr;
+		__entry->control	= scsi_command_control(cmd->t_task_cdb);
 		__entry->scsi_status	= cmd->scsi_status;
 		__entry->sense_length	= cmd->scsi_status == SAM_STAT_CHECK_CONDITION ?
 			min(18, ((u8 *) cmd->sense_buffer)[SPC_ADD_SENSE_LEN_OFFSET] + 8) : 0;
@@ -202,9 +204,7 @@ TRACE_EVENT(target_cmd_complete,
 		  show_opcode_name(__entry->opcode),
 		  __entry->data_length, __print_hex(__entry->cdb, 16),
 		  show_task_attribute_name(__entry->task_attribute),
-		  scsi_command_size(__entry->cdb) <= 16 ?
-			__entry->cdb[scsi_command_size(__entry->cdb) - 1] :
-			__entry->cdb[1]
+		  __entry->control
 	)
 );
 
Signature · 1 line
2.25.1
author maintainer
#91 lore raw

PATCH 91/112 usb: gadget: function: printer: fix use-after-free in __lock_acquire

In reply to Greg Kroah-Hartman

From: Zqiang <[email protected]>

[ Upstream commit e8d5f92b8d30bb4ade76494490c3c065e12411b1 ]

Fix this by increase object reference count.

BUG: KASAN: use-after-free in __lock_acquire+0x3fd4/0x4180
kernel/locking/lockdep.c:3831
Read of size 8 at addr ffff8880683b0018 by task syz-executor.0/3377

CPU: 1 PID: 3377 Comm: syz-executor.0 Not tainted 5.6.11 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0xce/0x128 lib/dump_stack.c:118
 print_address_description.constprop.4+0x21/0x3c0 mm/kasan/report.c:374
 __kasan_report+0x131/0x1b0 mm/kasan/report.c:506
 kasan_report+0x12/0x20 mm/kasan/common.c:641
 __asan_report_load8_noabort+0x14/0x20 mm/kasan/generic_report.c:135
 __lock_acquire+0x3fd4/0x4180 kernel/locking/lockdep.c:3831
 lock_acquire+0x127/0x350 kernel/locking/lockdep.c:4488
 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline]
 _raw_spin_lock_irqsave+0x35/0x50 kernel/locking/spinlock.c:159
 printer_ioctl+0x4a/0x110 drivers/usb/gadget/function/f_printer.c:723
 vfs_ioctl fs/ioctl.c:47 [inline]
 ksys_ioctl+0xfb/0x130 fs/ioctl.c:763
 __do_sys_ioctl fs/ioctl.c:772 [inline]
 __se_sys_ioctl fs/ioctl.c:770 [inline]
 __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:770
 do_syscall_64+0x9e/0x510 arch/x86/entry/common.c:294
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x4531a9
Code: ed 60 fc ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48

89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 bb 60 fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007fd14ad72c78 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 000000000073bfa8 RCX: 00000000004531a9
RDX: fffffffffffffff9 RSI: 000000000000009e RDI: 0000000000000003
RBP: 0000000000000003 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000004bbd61
R13: 00000000004d0a98 R14: 00007fd14ad736d4 R15: 00000000ffffffff

Allocated by task 2393:
 save_stack+0x21/0x90 mm/kasan/common.c:72
 set_track mm/kasan/common.c:80 [inline]
 __kasan_kmalloc.constprop.3+0xa7/0xd0 mm/kasan/common.c:515
 kasan_kmalloc+0x9/0x10 mm/kasan/common.c:529
 kmem_cache_alloc_trace+0xfa/0x2d0 mm/slub.c:2813
 kmalloc include/linux/slab.h:555 [inline]
 kzalloc include/linux/slab.h:669 [inline]
 gprinter_alloc+0xa1/0x870 drivers/usb/gadget/function/f_printer.c:1416
 usb_get_function+0x58/0xc0 drivers/usb/gadget/functions.c:61
 config_usb_cfg_link+0x1ed/0x3e0 drivers/usb/gadget/configfs.c:444
 configfs_symlink+0x527/0x11d0 fs/configfs/symlink.c:202
 vfs_symlink+0x33d/0x5b0 fs/namei.c:4201
 do_symlinkat+0x11b/0x1d0 fs/namei.c:4228
 __do_sys_symlinkat fs/namei.c:4242 [inline]
 __se_sys_symlinkat fs/namei.c:4239 [inline]
 __x64_sys_symlinkat+0x73/0xb0 fs/namei.c:4239
 do_syscall_64+0x9e/0x510 arch/x86/entry/common.c:294
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Freed by task 3368:
 save_stack+0x21/0x90 mm/kasan/common.c:72
 set_track mm/kasan/common.c:80 [inline]
 kasan_set_free_info mm/kasan/common.c:337 [inline]
 __kasan_slab_free+0x135/0x190 mm/kasan/common.c:476
 kasan_slab_free+0xe/0x10 mm/kasan/common.c:485
 slab_free_hook mm/slub.c:1444 [inline]
 slab_free_freelist_hook mm/slub.c:1477 [inline]
 slab_free mm/slub.c:3034 [inline]
 kfree+0xf7/0x410 mm/slub.c:3995
 gprinter_free+0x49/0xd0 drivers/usb/gadget/function/f_printer.c:1353
 usb_put_function+0x38/0x50 drivers/usb/gadget/functions.c:87
 config_usb_cfg_unlink+0x2db/0x3b0 drivers/usb/gadget/configfs.c:485
 configfs_unlink+0x3b9/0x7f0 fs/configfs/symlink.c:250
 vfs_unlink+0x287/0x570 fs/namei.c:4073
 do_unlinkat+0x4f9/0x620 fs/namei.c:4137
 __do_sys_unlink fs/namei.c:4184 [inline]
 __se_sys_unlink fs/namei.c:4182 [inline]
 __x64_sys_unlink+0x42/0x50 fs/namei.c:4182
 do_syscall_64+0x9e/0x510 arch/x86/entry/common.c:294
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

The buggy address belongs to the object at ffff8880683b0000
 which belongs to the cache kmalloc-1k of size 1024
The buggy address is located 24 bytes inside of
 1024-byte region [ffff8880683b0000, ffff8880683b0400)
The buggy address belongs to the page:
page:ffffea0001a0ec00 refcount:1 mapcount:0 mapping:ffff88806c00e300
index:0xffff8880683b1800 compound_mapcount: 0
flags: 0x100000000010200(slab|head)
raw: 0100000000010200 0000000000000000 0000000600000001 ffff88806c00e300
raw: ffff8880683b1800 000000008010000a 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
---
 drivers/usb/gadget/function/f_printer.c | 16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)
drivers/usb/gadget/function/f_printer.c +14 -2
index 69afc17fca38f..7b21ef09fffc2 100644
@@ -35,6 +35,7 @@
 #include <linux/types.h>
 #include <linux/ctype.h>
 #include <linux/cdev.h>
+#include <linux/kref.h>
 
 #include <asm/byteorder.h>
 #include <linux/io.h>
@@ -69,7 +70,7 @@ struct printer_dev {
 	struct usb_gadget	*gadget;
 	s8			interface;
 	struct usb_ep		*in_ep, *out_ep;
-
+	struct kref             kref;
 	struct list_head	rx_reqs;	/* List of free RX structs */
 	struct list_head	rx_reqs_active;	/* List of Active RX xfers */
 	struct list_head	rx_buffers;	/* List of completed xfers */
@@ -223,6 +224,13 @@ static inline struct usb_endpoint_descriptor *ep_desc(struct usb_gadget *gadget,
 
 /*-------------------------------------------------------------------------*/
 
+static void printer_dev_free(struct kref *kref)
+{
+	struct printer_dev *dev = container_of(kref, struct printer_dev, kref);
+
+	kfree(dev);
+}
+
 static struct usb_request *
 printer_req_alloc(struct usb_ep *ep, unsigned len, gfp_t gfp_flags)
 {
@@ -353,6 +361,7 @@ printer_open(struct inode *inode, struct file *fd)
 
 	spin_unlock_irqrestore(&dev->lock, flags);
 
+	kref_get(&dev->kref);
 	DBG(dev, "printer_open returned %x\n", ret);
 	return ret;
 }
@@ -370,6 +379,7 @@ printer_close(struct inode *inode, struct file *fd)
 	dev->printer_status &= ~PRINTER_SELECTED;
 	spin_unlock_irqrestore(&dev->lock, flags);
 
+	kref_put(&dev->kref, printer_dev_free);
 	DBG(dev, "printer_close\n");
 
 	return 0;
@@ -1316,7 +1326,8 @@ static void gprinter_free(struct usb_function *f)
 	struct f_printer_opts *opts;
 
 	opts = container_of(f->fi, struct f_printer_opts, func_inst);
-	kfree(dev);
+
+	kref_put(&dev->kref, printer_dev_free);
 	mutex_lock(&opts->lock);
 	--opts->refcnt;
 	mutex_unlock(&opts->lock);
@@ -1385,6 +1396,7 @@ static struct usb_function *gprinter_alloc(struct usb_function_instance *fi)
 		return ERR_PTR(-ENOMEM);
 	}
 
+	kref_init(&dev->kref);
 	++opts->refcnt;
 	dev->minor = opts->minor;
 	dev->pnp_string = opts->pnp_string;
Signature · 1 line
2.25.1
author maintainer
#92 lore raw

PATCH 92/112 udf: Limit sparing table size

In reply to Greg Kroah-Hartman

From: Jan Kara <[email protected]>

[ Upstream commit 44ac6b829c4e173fdf6df18e6dd86aecf9a3dc99 ]

Although UDF standard allows it, we don't support sparing table larger than a single block. Check it during mount so that we don't try to access memory beyond end of buffer.

---
 fs/udf/super.c | 6 ++++++
 1 file changed, 6 insertions(+)
fs/udf/super.c +6 -0
index 159977ec8e548..710f1b8fad9bf 100644
@@ -1390,6 +1390,12 @@ static int udf_load_sparable_map(struct super_block *sb,
 			(int)spm->numSparingTables);
 		return -EIO;
 	}
+	if (le32_to_cpu(spm->sizeSparingTable) > sb->s_blocksize) {
+		udf_err(sb, "error loading logical volume descriptor: "
+			"Too big sparing table size (%u)\n",
+			le32_to_cpu(spm->sizeSparingTable));
+		return -EIO;
+	}
 
 	for (i = 0; i < spm->numSparingTables; i++) {
 		loc = le32_to_cpu(spm->locSparingTable[i]);
Signature · 1 line
2.25.1
author maintainer
#93 lore raw

PATCH 93/112 udf: Avoid accessing uninitialized data on failed inode read

In reply to Greg Kroah-Hartman

From: Jan Kara <[email protected]>

[ Upstream commit 044e2e26f214e5ab26af85faffd8d1e4ec066931 ]

When we fail to read inode, some data accessed in udf_evict_inode() may be uninitialized. Move the accesses to !is_bad_inode() branch.

---
 fs/udf/inode.c | 25 ++++++++++++++-----------
 1 file changed, 14 insertions(+), 11 deletions(-)
fs/udf/inode.c +14 -11
index 3876448ec0dcb..2c39c1c81196c 100644
@@ -140,21 +140,24 @@ void udf_evict_inode(struct inode *inode)
 	struct udf_inode_info *iinfo = UDF_I(inode);
 	int want_delete = 0;
 
-	if (!inode->i_nlink && !is_bad_inode(inode)) {
-		want_delete = 1;
-		udf_setsize(inode, 0);
-		udf_update_inode(inode, IS_SYNC(inode));
+	if (!is_bad_inode(inode)) {
+		if (!inode->i_nlink) {
+			want_delete = 1;
+			udf_setsize(inode, 0);
+			udf_update_inode(inode, IS_SYNC(inode));
+		}
+		if (iinfo->i_alloc_type != ICBTAG_FLAG_AD_IN_ICB &&
+		    inode->i_size != iinfo->i_lenExtents) {
+			udf_warn(inode->i_sb,
+				 "Inode %lu (mode %o) has inode size %llu different from extent length %llu. Filesystem need not be standards compliant.\n",
+				 inode->i_ino, inode->i_mode,
+				 (unsigned long long)inode->i_size,
+				 (unsigned long long)iinfo->i_lenExtents);
+		}
 	}
 	truncate_inode_pages_final(&inode->i_data);
 	invalidate_inode_buffers(inode);
 	clear_inode(inode);
-	if (iinfo->i_alloc_type != ICBTAG_FLAG_AD_IN_ICB &&
-	    inode->i_size != iinfo->i_lenExtents) {
-		udf_warn(inode->i_sb, "Inode %lu (mode %o) has inode size %llu different from extent length %llu. Filesystem need not be standards compliant.\n",
-			 inode->i_ino, inode->i_mode,
-			 (unsigned long long)inode->i_size,
-			 (unsigned long long)iinfo->i_lenExtents);
-	}
 	kfree(iinfo->i_ext.i_data);
 	iinfo->i_ext.i_data = NULL;
 	udf_clear_extent_cache(inode);
Signature · 1 line
2.25.1
author maintainer
#94 lore raw

PATCH 94/112 ath9k: hif_usb: fix race condition between usb_get_urb() and usb_kill_anchored_urbs()

In reply to Greg Kroah-Hartman

From: Brooke Basile <[email protected]>

[ Upstream commit 03fb92a432ea5abe5909bca1455b7e44a9380480 ]

Calls to usb_kill_anchored_urbs() after usb_kill_urb() on multiprocessor systems create a race condition in which usb_kill_anchored_urbs() deallocates the URB before the completer callback is called in usb_kill_urb(), resulting in a use-after-free.
To fix this, add proper lock protection to usb_kill_urb() calls that can possibly run concurrently with usb_kill_anchored_urbs().

---
 drivers/net/wireless/ath/ath9k/hif_usb.c | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)
drivers/net/wireless/ath/ath9k/hif_usb.c +19 -0
index 76d91859cfde9..75072a8f8cf42 100644
@@ -445,10 +445,19 @@ static void hif_usb_stop(void *hif_handle)
 	spin_unlock_irqrestore(&hif_dev->tx.tx_lock, flags);
 
 	/* The pending URBs have to be canceled. */
+	spin_lock_irqsave(&hif_dev->tx.tx_lock, flags);
 	list_for_each_entry_safe(tx_buf, tx_buf_tmp,
 				 &hif_dev->tx.tx_pending, list) {
+		usb_get_urb(tx_buf->urb);
+		spin_unlock_irqrestore(&hif_dev->tx.tx_lock, flags);
 		usb_kill_urb(tx_buf->urb);
+		list_del(&tx_buf->list);
+		usb_free_urb(tx_buf->urb);
+		kfree(tx_buf->buf);
+		kfree(tx_buf);
+		spin_lock_irqsave(&hif_dev->tx.tx_lock, flags);
 	}
+	spin_unlock_irqrestore(&hif_dev->tx.tx_lock, flags);
 
 	usb_kill_anchored_urbs(&hif_dev->mgmt_submitted);
 }
@@ -758,27 +767,37 @@ static void ath9k_hif_usb_dealloc_tx_urbs(struct hif_device_usb *hif_dev)
 	struct tx_buf *tx_buf = NULL, *tx_buf_tmp = NULL;
 	unsigned long flags;
 
+	spin_lock_irqsave(&hif_dev->tx.tx_lock, flags);
 	list_for_each_entry_safe(tx_buf, tx_buf_tmp,
 				 &hif_dev->tx.tx_buf, list) {
+		usb_get_urb(tx_buf->urb);
+		spin_unlock_irqrestore(&hif_dev->tx.tx_lock, flags);
 		usb_kill_urb(tx_buf->urb);
 		list_del(&tx_buf->list);
 		usb_free_urb(tx_buf->urb);
 		kfree(tx_buf->buf);
 		kfree(tx_buf);
+		spin_lock_irqsave(&hif_dev->tx.tx_lock, flags);
 	}
+	spin_unlock_irqrestore(&hif_dev->tx.tx_lock, flags);
 
 	spin_lock_irqsave(&hif_dev->tx.tx_lock, flags);
 	hif_dev->tx.flags |= HIF_USB_TX_FLUSH;
 	spin_unlock_irqrestore(&hif_dev->tx.tx_lock, flags);
 
+	spin_lock_irqsave(&hif_dev->tx.tx_lock, flags);
 	list_for_each_entry_safe(tx_buf, tx_buf_tmp,
 				 &hif_dev->tx.tx_pending, list) {
+		usb_get_urb(tx_buf->urb);
+		spin_unlock_irqrestore(&hif_dev->tx.tx_lock, flags);
 		usb_kill_urb(tx_buf->urb);
 		list_del(&tx_buf->list);
 		usb_free_urb(tx_buf->urb);
 		kfree(tx_buf->buf);
 		kfree(tx_buf);
+		spin_lock_irqsave(&hif_dev->tx.tx_lock, flags);
 	}
+	spin_unlock_irqrestore(&hif_dev->tx.tx_lock, flags);
 
 	usb_kill_anchored_urbs(&hif_dev->mgmt_submitted);
 }
Signature · 1 line
2.25.1
author maintainer
#95 lore raw

PATCH 95/112 misc: rtsx: Fix memory leak in rtsx_pci_probe

In reply to Greg Kroah-Hartman

From: Keita Suzuki <[email protected]>

[ Upstream commit bc28369c6189009b66d9619dd9f09bd8c684bb98 ]

When mfd_add_devices() fail, pcr->slots should also be freed. However, the current implementation does not free the member, leading to a memory leak.

Fix this by adding a new goto label that frees pcr->slots.

---
 drivers/mfd/rtsx_pcr.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/mfd/rtsx_pcr.c +3 -1
index 98029ee0959e3..be61f8606a045 100644
@@ -1255,12 +1255,14 @@ static int rtsx_pci_probe(struct pci_dev *pcidev,
 	ret = mfd_add_devices(&pcidev->dev, pcr->id, rtsx_pcr_cells,
 			ARRAY_SIZE(rtsx_pcr_cells), NULL, 0, NULL);
 	if (ret < 0)
-		goto disable_irq;
+		goto free_slots;
 
 	schedule_delayed_work(&pcr->idle_work, msecs_to_jiffies(200));
 
 	return 0;
 
+free_slots:
+	kfree(pcr->slots);
 disable_irq:
 	free_irq(pcr->irq, (void *)pcr);
 disable_msi:
Signature · 1 line
2.25.1
author maintainer
#96 lore raw

PATCH 96/112 reiserfs: only call unlock_new_inode() if I_NEW

In reply to Greg Kroah-Hartman

From: Eric Biggers <[email protected]>

[ Upstream commit 8859bf2b1278d064a139e3031451524a49a56bd0 ]

unlock_new_inode() is only meant to be called after a new inode has already been inserted into the hash table. But reiserfs_new_inode() can call it even before it has inserted the inode, triggering the WARNING in unlock_new_inode(). Fix this by only calling unlock_new_inode() if the inode has the I_NEW flag set, indicating that it's in the table.

This addresses the syzbot report "WARNING in unlock_new_inode"
(https://syzkaller.appspot.com/bug?extid=187510916eb6a14598f7).

---
 fs/reiserfs/inode.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
fs/reiserfs/inode.c +2 -1
index cfb4691d92741..ccbb15ab029f4 100644
@@ -2157,7 +2157,8 @@ int reiserfs_new_inode(struct reiserfs_transaction_handle *th,
 out_inserted_sd:
 	clear_nlink(inode);
 	th->t_trans_id = 0;	/* so the caller can't use this handle later */
-	unlock_new_inode(inode); /* OK to do even if we hadn't locked it */
+	if (inode->i_state & I_NEW)
+		unlock_new_inode(inode);
 	iput(inode);
 	return err;
 }
Signature · 1 line
2.25.1
author maintainer
#97 lore raw

PATCH 97/112 xfs: make sure the rt allocator doesnt run off the end

In reply to Greg Kroah-Hartman

From: Darrick J. Wong <[email protected]>

[ Upstream commit 2a6ca4baed620303d414934aa1b7b0a8e7bab05f ]

There's an overflow bug in the realtime allocator. If the rt volume is large enough to handle a single allocation request that is larger than the maximum bmap extent length and the rt bitmap ends exactly on a bitmap block boundary, it's possible that the near allocator will try to check the freeness of a range that extends past the end of the bitmap. This fails with a corruption error and shuts down the fs.

Therefore, constrain maxlen so that the range scan cannot run off the end of the rt bitmap.

---
 fs/xfs/xfs_rtalloc.c | 11 +++++++++++
 1 file changed, 11 insertions(+)
fs/xfs/xfs_rtalloc.c +11 -0
index 919b6544b61a3..bda5248fc6498 100644
@@ -256,6 +256,9 @@ xfs_rtallocate_extent_block(
 		end = XFS_BLOCKTOBIT(mp, bbno + 1) - 1;
 	     i <= end;
 	     i++) {
+		/* Make sure we don't scan off the end of the rt volume. */
+		maxlen = min(mp->m_sb.sb_rextents, i + maxlen) - i;
+
 		/*
 		 * See if there's a free extent of maxlen starting at i.
 		 * If it's not so then next will contain the first non-free.
@@ -447,6 +450,14 @@ xfs_rtallocate_extent_near(
 	 */
 	if (bno >= mp->m_sb.sb_rextents)
 		bno = mp->m_sb.sb_rextents - 1;
+
+	/* Make sure we don't run off the end of the rt volume. */
+	maxlen = min(mp->m_sb.sb_rextents, bno + maxlen) - bno;
+	if (maxlen < minlen) {
+		*rtblock = NULLRTBLOCK;
+		return 0;
+	}
+
 	/*
 	 * Try the exact allocation first.
 	 */
Signature · 1 line
2.25.1
author maintainer
#98 lore raw

PATCH 98/112 usb: ohci: Default to per-port over-current protection

In reply to Greg Kroah-Hartman

From: Hamish Martin <[email protected]>

[ Upstream commit b77d2a0a223bc139ee8904991b2922d215d02636 ]

Some integrated OHCI controller hubs do not expose all ports of the hub to pins on the SoC. In some cases the unconnected ports generate spurious over-current events. For example the Broadcom 56060/Ranger 2 SoC contains a nominally 3 port hub but only the first port is wired.

Default behaviour for ohci-platform driver is to use global over-current protection mode (AKA "ganged"). This leads to the spurious over-current events affecting all ports in the hub.

We now alter the default to use per-port over-current protection.

This patch results in the following configuration changes depending on quirks:
- For quirk OHCI_QUIRK_SUPERIO no changes. These systems remain set up for ganged power switching and no over-current protection.
- For quirk OHCI_QUIRK_AMD756 or OHCI_QUIRK_HUB_POWER power switching remains at none, while over-current protection is now guaranteed to be set to per-port rather than the previous behaviour where it was either none or global over-current protection depending on the value at function entry.

---
 drivers/usb/host/ohci-hcd.c | 16 ++++++++++------
 1 file changed, 10 insertions(+), 6 deletions(-)
drivers/usb/host/ohci-hcd.c +10 -6
index 27bd3e49fe8e3..07d76d9d4ce1b 100644
@@ -663,20 +663,24 @@ static int ohci_run (struct ohci_hcd *ohci)
 
 	/* handle root hub init quirks ... */
 	val = roothub_a (ohci);
-	val &= ~(RH_A_PSM | RH_A_OCPM);
+	/* Configure for per-port over-current protection by default */
+	val &= ~RH_A_NOCP;
+	val |= RH_A_OCPM;
 	if (ohci->flags & OHCI_QUIRK_SUPERIO) {
-		/* NSC 87560 and maybe others */
+		/* NSC 87560 and maybe others.
+		 * Ganged power switching, no over-current protection.
+		 */
 		val |= RH_A_NOCP;
-		val &= ~(RH_A_POTPGT | RH_A_NPS);
-		ohci_writel (ohci, val, &ohci->regs->roothub.a);
+		val &= ~(RH_A_POTPGT | RH_A_NPS | RH_A_PSM | RH_A_OCPM);
 	} else if ((ohci->flags & OHCI_QUIRK_AMD756) ||
 			(ohci->flags & OHCI_QUIRK_HUB_POWER)) {
 		/* hub power always on; required for AMD-756 and some
-		 * Mac platforms.  ganged overcurrent reporting, if any.
+		 * Mac platforms.
 		 */
 		val |= RH_A_NPS;
-		ohci_writel (ohci, val, &ohci->regs->roothub.a);
 	}
+	ohci_writel(ohci, val, &ohci->regs->roothub.a);
+
 	ohci_writel (ohci, RH_HS_LPSC, &ohci->regs->roothub.status);
 	ohci_writel (ohci, (val & RH_A_NPS) ? 0 : RH_B_PPCM,
 						&ohci->regs->roothub.b);
Signature · 1 line
2.25.1
author maintainer
#99 lore raw

PATCH 99/112 Bluetooth: Only mark socket zapped after unlocking

In reply to Greg Kroah-Hartman

From: Abhishek Pandit-Subedi <[email protected]>

[ Upstream commit 20ae4089d0afeb24e9ceb026b996bfa55c983cc2 ]

Since l2cap_sock_teardown_cb doesn't acquire the channel lock before setting the socket as zapped, it could potentially race with l2cap_sock_release which frees the socket. Thus, wait until the cleanup is complete before marking the socket as zapped.

This race was reproduced on a JBL GO speaker after the remote device rejected L2CAP connection due to resource unavailability.

Here is a dmesg log with debug logs from a repro of this bug:

[ 3465.424086] Bluetooth: hci_core.c:hci_acldata_packet() hci0 len 16 handle 0x0003 flags 0x0002
[ 3465.424090] Bluetooth: hci_conn.c:hci_conn_enter_active_mode() hcon 00000000cfedd07d mode 0
[ 3465.424094] Bluetooth: l2cap_core.c:l2cap_recv_acldata() conn 000000007eae8952 len 16 flags 0x2
[ 3465.424098] Bluetooth: l2cap_core.c:l2cap_recv_frame() len 12, cid 0x0001
[ 3465.424102] Bluetooth: l2cap_core.c:l2cap_raw_recv() conn 000000007eae8952
[ 3465.424175] Bluetooth: l2cap_core.c:l2cap_sig_channel() code 0x03 len 8 id 0x0c
[ 3465.424180] Bluetooth: l2cap_core.c:l2cap_connect_create_rsp() dcid 0x0045 scid 0x0000 result 0x02 status 0x00
[ 3465.424189] Bluetooth: l2cap_core.c:l2cap_chan_put() chan 000000006acf9bff orig refcnt 4
[ 3465.424196] Bluetooth: l2cap_core.c:l2cap_chan_del() chan 000000006acf9bff, conn 000000007eae8952, err 111, state BT_CONNECT
[ 3465.424203] Bluetooth: l2cap_sock.c:l2cap_sock_teardown_cb() chan 000000006acf9bff state BT_CONNECT
[ 3465.424221] Bluetooth: l2cap_core.c:l2cap_chan_put() chan 000000006acf9bff orig refcnt 3
[ 3465.424226] Bluetooth: hci_core.h:hci_conn_drop() hcon 00000000cfedd07d orig refcnt 6
[ 3465.424234] BUG: spinlock bad magic on CPU#2, kworker/u17:0/159
[ 3465.425626] Bluetooth: hci_sock.c:hci_sock_sendmsg() sock 000000002bb0cb64 sk 00000000a7964053
[ 3465.430330]  lock: 0xffffff804410aac0, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0
[ 3465.430332] Causing a watchdog bite!
---
 net/bluetooth/l2cap_sock.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)
net/bluetooth/l2cap_sock.c +4 -3
index e562385d9440e..30731ce390ba0 100644
@@ -1330,8 +1330,6 @@ static void l2cap_sock_teardown_cb(struct l2cap_chan *chan, int err)
 
 	parent = bt_sk(sk)->parent;
 
-	sock_set_flag(sk, SOCK_ZAPPED);
-
 	switch (chan->state) {
 	case BT_OPEN:
 	case BT_BOUND:
@@ -1358,8 +1356,11 @@ static void l2cap_sock_teardown_cb(struct l2cap_chan *chan, int err)
 
 		break;
 	}
-
 	release_sock(sk);
+
+	/* Only zap after cleanup to avoid use after free race */
+	sock_set_flag(sk, SOCK_ZAPPED);
+
 }
 
 static void l2cap_sock_state_change_cb(struct l2cap_chan *chan, int state,
Signature · 1 line
2.25.1
author maintainer
#100 lore raw

PATCH 100/112 scsi: ibmvfc: Fix error return in ibmvfc_probe()

In reply to Greg Kroah-Hartman

From: Jing Xiangfeng <[email protected]>

[ Upstream commit 5e48a084f4e824e1b624d3fd7ddcf53d2ba69e53 ]

Fix to return error code PTR_ERR() from the error handling case instead of 0.

---
 drivers/scsi/ibmvscsi/ibmvfc.c | 1 +
 1 file changed, 1 insertion(+)
drivers/scsi/ibmvscsi/ibmvfc.c +1 -0
index 0526a47e30a3f..db80ab8335dfb 100644
@@ -4790,6 +4790,7 @@ static int ibmvfc_probe(struct vio_dev *vdev, const struct vio_device_id *id)
 	if (IS_ERR(vhost->work_thread)) {
 		dev_err(dev, "Couldn't create kernel thread: %ld\n",
 			PTR_ERR(vhost->work_thread));
+		rc = PTR_ERR(vhost->work_thread);
 		goto free_host_mem;
 	}
 
Signature · 1 line
2.25.1
author maintainer
#101 lore raw

PATCH 101/112 brcmsmac: fix memory leak in wlc_phy_attach_lcnphy

In reply to Greg Kroah-Hartman

From: Keita Suzuki <[email protected]>

[ Upstream commit f4443293d741d1776b86ed1dd8c4e4285d0775fc ]

When wlc_phy_txpwr_srom_read_lcnphy fails in wlc_phy_attach_lcnphy, the allocated pi->u.pi_lcnphy is leaked, since struct brcms_phy will be freed in the caller function.

Fix this by calling wlc_phy_detach_lcnphy in the error handler of wlc_phy_txpwr_srom_read_lcnphy before returning.

---
 drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c +3 -1
index 93d4cde0eb313..c9f48ec46f4a1 100644
@@ -5090,8 +5090,10 @@ bool wlc_phy_attach_lcnphy(struct brcms_phy *pi)
 	pi->pi_fptr.radioloftget = wlc_lcnphy_get_radio_loft;
 	pi->pi_fptr.detach = wlc_phy_detach_lcnphy;
 
-	if (!wlc_phy_txpwr_srom_read_lcnphy(pi))
+	if (!wlc_phy_txpwr_srom_read_lcnphy(pi)) {
+		kfree(pi->u.pi_lcnphy);
 		return false;
+	}
 
 	if (LCNREV_IS(pi->pubpi.phy_rev, 1)) {
 		if (pi_lcn->lcnphy_tempsense_option == 3) {
Signature · 1 line
2.25.1
author maintainer
#102 lore raw

PATCH 102/112 rtl8xxxu: prevent potential memory leak

In reply to Greg Kroah-Hartman

From: Chris Chiu <[email protected]>

[ Upstream commit 86279456a4d47782398d3cb8193f78f672e36cac ]

Free the skb if usb_submit_urb fails on rx_urb. And free the urb no matter usb_submit_urb succeeds or not in rtl8xxxu_submit_int_urb.

---
 drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)
drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c +9 -1
index 8254d4b22c50b..b8d387edde65c 100644
@@ -5135,7 +5135,6 @@ static int rtl8xxxu_submit_int_urb(struct ieee80211_hw *hw)
 	ret = usb_submit_urb(urb, GFP_KERNEL);
 	if (ret) {
 		usb_unanchor_urb(urb);
-		usb_free_urb(urb);
 		goto error;
 	}
 
@@ -5144,6 +5143,7 @@ static int rtl8xxxu_submit_int_urb(struct ieee80211_hw *hw)
 	rtl8xxxu_write32(priv, REG_USB_HIMR, val32);
 
 error:
+	usb_free_urb(urb);
 	return ret;
 }
 
@@ -5424,6 +5424,7 @@ static int rtl8xxxu_start(struct ieee80211_hw *hw)
 	struct rtl8xxxu_priv *priv = hw->priv;
 	struct rtl8xxxu_rx_urb *rx_urb;
 	struct rtl8xxxu_tx_urb *tx_urb;
+	struct sk_buff *skb;
 	unsigned long flags;
 	int ret, i;
 
@@ -5472,6 +5473,13 @@ static int rtl8xxxu_start(struct ieee80211_hw *hw)
 		rx_urb->hw = hw;
 
 		ret = rtl8xxxu_submit_rx_urb(priv, rx_urb);
+		if (ret) {
+			if (ret != -ENOMEM) {
+				skb = (struct sk_buff *)rx_urb->urb.context;
+				dev_kfree_skb(skb);
+			}
+			rtl8xxxu_queue_rx_urb(priv, rx_urb);
+		}
 	}
 exit:
 	/*
Signature · 1 line
2.25.1
author maintainer
#103 lore raw

PATCH 103/112 Fix use after free in get_capset_info callback.

In reply to Greg Kroah-Hartman

From: Doug Horn <[email protected]>

[ Upstream commit e219688fc5c3d0d9136f8d29d7e0498388f01440 ]

If a response to virtio_gpu_cmd_get_capset_info takes longer than five seconds to return, the callback will access freed kernel memory in vg->capsets.

---
 drivers/gpu/drm/virtio/virtgpu_kms.c |  2 ++
 drivers/gpu/drm/virtio/virtgpu_vq.c  | 10 +++++++---
 2 files changed, 9 insertions(+), 3 deletions(-)
drivers/gpu/drm/virtio/virtgpu_kms.c +2 -0
index 06496a1281622..476b9993b0682 100644
@@ -113,8 +113,10 @@ static void virtio_gpu_get_capsets(struct virtio_gpu_device *vgdev,
 					 vgdev->capsets[i].id > 0, 5 * HZ);
 		if (ret == 0) {
 			DRM_ERROR("timed out waiting for cap set %d\n", i);
+			spin_lock(&vgdev->display_info_lock);
 			kfree(vgdev->capsets);
 			vgdev->capsets = NULL;
+			spin_unlock(&vgdev->display_info_lock);
 			return;
 		}
 		DRM_INFO("cap set %d: id %d, max-version %d, max-size %d\n",
drivers/gpu/drm/virtio/virtgpu_vq.c +7 -3
index 772a5a3b0ce1a..18e8fcad6690b 100644
@@ -596,9 +596,13 @@ static void virtio_gpu_cmd_get_capset_info_cb(struct virtio_gpu_device *vgdev,
 	int i = le32_to_cpu(cmd->capset_index);
 
 	spin_lock(&vgdev->display_info_lock);
-	vgdev->capsets[i].id = le32_to_cpu(resp->capset_id);
-	vgdev->capsets[i].max_version = le32_to_cpu(resp->capset_max_version);
-	vgdev->capsets[i].max_size = le32_to_cpu(resp->capset_max_size);
+	if (vgdev->capsets) {
+		vgdev->capsets[i].id = le32_to_cpu(resp->capset_id);
+		vgdev->capsets[i].max_version = le32_to_cpu(resp->capset_max_version);
+		vgdev->capsets[i].max_size = le32_to_cpu(resp->capset_max_size);
+	} else {
+		DRM_ERROR("invalid capset memory.");
+	}
 	spin_unlock(&vgdev->display_info_lock);
 	wake_up(&vgdev->resp_wq);
 }
Signature · 1 line
2.25.1
author maintainer
#104 lore raw

PATCH 104/112 tty: ipwireless: fix error handling

In reply to Greg Kroah-Hartman

From: Tong Zhang <[email protected]>

[ Upstream commit db332356222d9429731ab9395c89cca403828460 ]

ipwireless_send_packet() can only return 0 on success and -ENOMEM on error, the caller should check non zero for error condition

---
 drivers/tty/ipwireless/network.c | 4 ++--
 drivers/tty/ipwireless/tty.c     | 2 +-
 2 files changed, 3 insertions(+), 3 deletions(-)
drivers/tty/ipwireless/network.c +2 -2
index c0dfb642383b2..dc7f4eb18e0a7 100644
@@ -116,7 +116,7 @@ static int ipwireless_ppp_start_xmit(struct ppp_channel *ppp_channel,
 					       skb->len,
 					       notify_packet_sent,
 					       network);
-			if (ret == -1) {
+			if (ret < 0) {
 				skb_pull(skb, 2);
 				return 0;
 			}
@@ -133,7 +133,7 @@ static int ipwireless_ppp_start_xmit(struct ppp_channel *ppp_channel,
 					       notify_packet_sent,
 					       network);
 			kfree(buf);
-			if (ret == -1)
+			if (ret < 0)
 				return 0;
 		}
 		kfree_skb(skb);
drivers/tty/ipwireless/tty.c +1 -1
index 345cebb07ae79..0b06b1847450f 100644
@@ -217,7 +217,7 @@ static int ipw_write(struct tty_struct *linux_tty,
 	ret = ipwireless_send_packet(tty->hardware, IPW_CHANNEL_RAS,
 			       buf, count,
 			       ipw_write_packet_sent_callback, tty);
-	if (ret == -1) {
+	if (ret < 0) {
 		mutex_unlock(&tty->ipw_tty_mutex);
 		return 0;
 	}
Signature · 1 line
2.25.1
author maintainer
#105 lore raw

PATCH 105/112 ipvs: Fix uninit-value in do_ip_vs_set_ctl()

In reply to Greg Kroah-Hartman

From: Peilin Ye <[email protected]>

[ Upstream commit c5a8a8498eed1c164afc94f50a939c1a10abf8ad ]

do_ip_vs_set_ctl() is referencing uninitialized stack value when len is zero. Fix it.

---
 net/netfilter/ipvs/ip_vs_ctl.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)
net/netfilter/ipvs/ip_vs_ctl.c +4 -3
index b176f76dfaa14..c7ee962a547b9 100644
@@ -2383,6 +2383,10 @@ do_ip_vs_set_ctl(struct sock *sk, int cmd, void __user *user, unsigned int len)
 		/* Set timeout values for (tcp tcpfin udp) */
 		ret = ip_vs_set_timeout(ipvs, (struct ip_vs_timeout_user *)arg);
 		goto out_unlock;
+	} else if (!len) {
+		/* No more commands with len == 0 below */
+		ret = -EINVAL;
+		goto out_unlock;
 	}
 
 	usvc_compat = (struct ip_vs_service_user *)arg;
@@ -2459,9 +2463,6 @@ do_ip_vs_set_ctl(struct sock *sk, int cmd, void __user *user, unsigned int len)
 		break;
 	case IP_VS_SO_SET_DELDEST:
 		ret = ip_vs_del_dest(svc, &udest);
-		break;
-	default:
-		ret = -EINVAL;
 	}
 
   out_unlock:
Signature · 1 line
2.25.1
author maintainer
#106 lore raw

PATCH 106/112 reiserfs: Fix memory leak in reiserfs_parse_options()

In reply to Greg Kroah-Hartman

From: Jan Kara <[email protected]>

[ Upstream commit e9d4709fcc26353df12070566970f080e651f0c9 ]

When a usrjquota or grpjquota mount option is used multiple times, we will leak memory allocated for the file name. Make sure the last setting is used and all the previous ones are properly freed.

---
 fs/reiserfs/super.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
fs/reiserfs/super.c +4 -4
index f9796fd515315..503d8c06e0d93 100644
@@ -1232,6 +1232,10 @@ static int reiserfs_parse_options(struct super_block *s,
 						 "turned on.");
 				return 0;
 			}
+			if (qf_names[qtype] !=
+			    REISERFS_SB(s)->s_qf_names[qtype])
+				kfree(qf_names[qtype]);
+			qf_names[qtype] = NULL;
 			if (*arg) {	/* Some filename specified? */
 				if (REISERFS_SB(s)->s_qf_names[qtype]
 				    && strcmp(REISERFS_SB(s)->s_qf_names[qtype],
@@ -1261,10 +1265,6 @@ static int reiserfs_parse_options(struct super_block *s,
 				else
 					*mount_options |= 1 << REISERFS_GRPQUOTA;
 			} else {
-				if (qf_names[qtype] !=
-				    REISERFS_SB(s)->s_qf_names[qtype])
-					kfree(qf_names[qtype]);
-				qf_names[qtype] = NULL;
 				if (qtype == USRQUOTA)
 					*mount_options &= ~(1 << REISERFS_USRQUOTA);
 				else
Signature · 1 line
2.25.1
author maintainer
#107 lore raw

PATCH 107/112 brcm80211: fix possible memleak in brcmf_proto_msgbuf_attach

In reply to Greg Kroah-Hartman

From: Wang Yufen <[email protected]>

[ Upstream commit 6c151410d5b57e6bb0d91a735ac511459539a7bf ]

When brcmf_proto_msgbuf_attach fail and msgbuf->txflow_wq != NULL, we should destroy the workqueue.

---
 drivers/net/wireless/brcm80211/brcmfmac/msgbuf.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/net/wireless/brcm80211/brcmfmac/msgbuf.c +2 -0
index f944f356d9c51..cacb43573f579 100644
@@ -1530,6 +1530,8 @@ int brcmf_proto_msgbuf_attach(struct brcmf_pub *drvr)
 					  BRCMF_TX_IOCTL_MAX_MSG_SIZE,
 					  msgbuf->ioctbuf,
 					  msgbuf->ioctbuf_handle);
+		if (msgbuf->txflow_wq)
+			destroy_workqueue(msgbuf->txflow_wq);
 		kfree(msgbuf);
 	}
 	return -ENOMEM;
Signature · 1 line
2.25.1
author maintainer
#108 lore raw

PATCH 108/112 usb: core: Solve race condition in anchor cleanup functions

In reply to Greg Kroah-Hartman

From: Eli Billauer <[email protected]>

[ Upstream commit fbc299437c06648afcc7891e6e2e6638dd48d4df ]

usb_kill_anchored_urbs() is commonly used to cancel all URBs on an anchor just before releasing resources which the URBs rely on. By doing so, users of this function rely on that no completer callbacks will take place from any URB on the anchor after it returns.

However if this function is called in parallel with __usb_hcd_giveback_urb processing a URB on the anchor, the latter may call the completer callback after usb_kill_anchored_urbs() returns. This can lead to a kernel panic due to use after release of memory in interrupt context.

The race condition is that __usb_hcd_giveback_urb() first unanchors the URB and then makes the completer callback. Such URB is hence invisible to usb_kill_anchored_urbs(), allowing it to return before the completer has been called, since the anchor's urb_list is empty.

Even worse, if the racing completer callback resubmits the URB, it may remain in the system long after usb_kill_anchored_urbs() returns.

Hence list_empty(&anchor->urb_list), which is used in the existing while-loop, doesn't reliably ensure that all URBs of the anchor are gone.

A similar problem exists with usb_poison_anchored_urbs() and usb_scuttle_anchored_urbs().

This patch adds an external do-while loop, which ensures that all URBs are indeed handled before these three functions return. This change has no effect at all unless the race condition occurs, in which case the loop will busy-wait until the racing completer callback has finished. This is a rare condition, so the CPU waste of this spinning is negligible.

The additional do-while loop relies on usb_anchor_check_wakeup(), which returns true iff the anchor list is empty, and there is no __usb_hcd_giveback_urb() in the system that is in the middle of the unanchor-before-complete phase. The @suspend_wakeups member of struct usb_anchor is used for this purpose, which was introduced to solve another problem which the same race condition causes, in commit 6ec4147e7bdb ("usb-anchor: Delay usb_wait_anchor_empty_timeout wake up till completion is done").

The surely_empty variable is necessary, because usb_anchor_check_wakeup() must be called with the lock held to prevent races. However the spinlock must be released and reacquired if the outer loop spins with an empty URB list while waiting for the unanchor-before-complete passage to finish:
The completer callback may very well attempt to take the very same lock.

To summarize, using usb_anchor_check_wakeup() means that the patched functions can return only when the anchor's list is empty, and there is no invisible URB being processed. Since the inner while loop finishes on the empty list condition, the new do-while loop will terminate as well, except for when the said race condition occurs.

---
 drivers/usb/core/urb.c | 89 +++++++++++++++++++++++++-----------------
 1 file changed, 54 insertions(+), 35 deletions(-)
drivers/usb/core/urb.c +54 -35
index c095cde55329c..8c4bfd42f785d 100644
@@ -767,11 +767,12 @@ void usb_block_urb(struct urb *urb)
 EXPORT_SYMBOL_GPL(usb_block_urb);
 
 /**
- * usb_kill_anchored_urbs - cancel transfer requests en masse
+ * usb_kill_anchored_urbs - kill all URBs associated with an anchor
  * @anchor: anchor the requests are bound to
  *
- * this allows all outstanding URBs to be killed starting
- * from the back of the queue
+ * This kills all outstanding URBs starting from the back of the queue,
+ * with guarantee that no completer callbacks will take place from the
+ * anchor after this function returns.
  *
  * This routine should not be called by a driver after its disconnect
  * method has returned.
@@ -779,20 +780,26 @@ EXPORT_SYMBOL_GPL(usb_block_urb);
 void usb_kill_anchored_urbs(struct usb_anchor *anchor)
 {
 	struct urb *victim;
+	int surely_empty;
 
-	spin_lock_irq(&anchor->lock);
-	while (!list_empty(&anchor->urb_list)) {
-		victim = list_entry(anchor->urb_list.prev, struct urb,
-				    anchor_list);
-		/* we must make sure the URB isn't freed before we kill it*/
-		usb_get_urb(victim);
-		spin_unlock_irq(&anchor->lock);
-		/* this will unanchor the URB */
-		usb_kill_urb(victim);
-		usb_put_urb(victim);
+	do {
 		spin_lock_irq(&anchor->lock);
-	}
-	spin_unlock_irq(&anchor->lock);
+		while (!list_empty(&anchor->urb_list)) {
+			victim = list_entry(anchor->urb_list.prev,
+					    struct urb, anchor_list);
+			/* make sure the URB isn't freed before we kill it */
+			usb_get_urb(victim);
+			spin_unlock_irq(&anchor->lock);
+			/* this will unanchor the URB */
+			usb_kill_urb(victim);
+			usb_put_urb(victim);
+			spin_lock_irq(&anchor->lock);
+		}
+		surely_empty = usb_anchor_check_wakeup(anchor);
+
+		spin_unlock_irq(&anchor->lock);
+		cpu_relax();
+	} while (!surely_empty);
 }
 EXPORT_SYMBOL_GPL(usb_kill_anchored_urbs);
 
@@ -811,21 +818,27 @@ EXPORT_SYMBOL_GPL(usb_kill_anchored_urbs);
 void usb_poison_anchored_urbs(struct usb_anchor *anchor)
 {
 	struct urb *victim;
+	int surely_empty;
 
-	spin_lock_irq(&anchor->lock);
-	anchor->poisoned = 1;
-	while (!list_empty(&anchor->urb_list)) {
-		victim = list_entry(anchor->urb_list.prev, struct urb,
-				    anchor_list);
-		/* we must make sure the URB isn't freed before we kill it*/
-		usb_get_urb(victim);
-		spin_unlock_irq(&anchor->lock);
-		/* this will unanchor the URB */
-		usb_poison_urb(victim);
-		usb_put_urb(victim);
+	do {
 		spin_lock_irq(&anchor->lock);
-	}
-	spin_unlock_irq(&anchor->lock);
+		anchor->poisoned = 1;
+		while (!list_empty(&anchor->urb_list)) {
+			victim = list_entry(anchor->urb_list.prev,
+					    struct urb, anchor_list);
+			/* make sure the URB isn't freed before we kill it */
+			usb_get_urb(victim);
+			spin_unlock_irq(&anchor->lock);
+			/* this will unanchor the URB */
+			usb_poison_urb(victim);
+			usb_put_urb(victim);
+			spin_lock_irq(&anchor->lock);
+		}
+		surely_empty = usb_anchor_check_wakeup(anchor);
+
+		spin_unlock_irq(&anchor->lock);
+		cpu_relax();
+	} while (!surely_empty);
 }
 EXPORT_SYMBOL_GPL(usb_poison_anchored_urbs);
 
@@ -965,14 +978,20 @@ void usb_scuttle_anchored_urbs(struct usb_anchor *anchor)
 {
 	struct urb *victim;
 	unsigned long flags;
+	int surely_empty;
+
+	do {
+		spin_lock_irqsave(&anchor->lock, flags);
+		while (!list_empty(&anchor->urb_list)) {
+			victim = list_entry(anchor->urb_list.prev,
+					    struct urb, anchor_list);
+			__usb_unanchor_urb(victim, anchor);
+		}
+		surely_empty = usb_anchor_check_wakeup(anchor);
 
-	spin_lock_irqsave(&anchor->lock, flags);
-	while (!list_empty(&anchor->urb_list)) {
-		victim = list_entry(anchor->urb_list.prev, struct urb,
-				    anchor_list);
-		__usb_unanchor_urb(victim, anchor);
-	}
-	spin_unlock_irqrestore(&anchor->lock, flags);
+		spin_unlock_irqrestore(&anchor->lock, flags);
+		cpu_relax();
+	} while (!surely_empty);
 }
 
 EXPORT_SYMBOL_GPL(usb_scuttle_anchored_urbs);
Signature · 1 line
2.25.1
author maintainer
#109 lore raw

PATCH 109/112 ath10k: check idx validity in __ath10k_htt_rx_ring_fill_n()

In reply to Greg Kroah-Hartman

From: Zekun Shen <[email protected]>

[ Upstream commit bad60b8d1a7194df38fd7fe4b22f3f4dcf775099 ]

The idx in __ath10k_htt_rx_ring_fill_n function lives in consistent dma region writable by the device. Malfunctional or malicious device could manipulate such idx to have a OOB write. Either by

    htt->rx_ring.netbufs_ring[idx] = skb;
or by
    ath10k_htt_set_paddrs_ring(htt, paddr, idx);

The idx can also be negative as it's signed, giving a large memory space to write to.

It's possibly exploitable by corruptting a legit pointer with a skb pointer. And then fill skb with payload as rougue object.

Part of the log here. Sometimes it appears as UAF when writing to a freed memory by chance.

 [   15.594376] BUG: unable to handle page fault for address: ffff887f5c1804f0
 [   15.595483] #PF: supervisor write access in kernel mode
 [   15.596250] #PF: error_code(0x0002) - not-present page
 [   15.597013] PGD 0 P4D 0
 [   15.597395] Oops: 0002 [#1] SMP KASAN PTI
 [   15.597967] CPU: 0 PID: 82 Comm: kworker/u2:2 Not tainted 5.6.0 #69
 [   15.598843] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
 BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
 [   15.600438] Workqueue: ath10k_wq ath10k_core_register_work [ath10k_core]
 [   15.601389] RIP: 0010:__ath10k_htt_rx_ring_fill_n
 (linux/drivers/net/wireless/ath/ath10k/htt_rx.c:173) ath10k_core
---
 drivers/net/wireless/ath/ath10k/htt_rx.c | 8 ++++++++
 1 file changed, 8 insertions(+)
drivers/net/wireless/ath/ath10k/htt_rx.c +8 -0
index a65b5d7f59f44..1c6c422dbad64 100644
@@ -99,6 +99,14 @@ static int __ath10k_htt_rx_ring_fill_n(struct ath10k_htt *htt, int num)
 	BUILD_BUG_ON(HTT_RX_RING_FILL_LEVEL >= HTT_RX_RING_SIZE / 2);
 
 	idx = __le32_to_cpu(*htt->rx_ring.alloc_idx.vaddr);
+
+	if (idx < 0 || idx >= htt->rx_ring.size) {
+		ath10k_err(htt->ar, "rx ring index is not valid, firmware malfunctioning?\n");
+		idx &= htt->rx_ring.size_mask;
+		ret = -ENOMEM;
+		goto fail;
+	}
+
 	while (num > 0) {
 		skb = dev_alloc_skb(HTT_RX_BUF_SIZE + HTT_RX_DESC_ALIGN);
 		if (!skb) {
Signature · 1 line
2.25.1
author maintainer
#110 lore raw

PATCH 110/112 net: korina: cast KSEG0 address to pointer in kfree

In reply to Greg Kroah-Hartman

From: Valentin Vidic <[email protected]>

[ Upstream commit 3bd57b90554b4bb82dce638e0668ef9dc95d3e96 ]

Fixes gcc warning:

passing argument 1 of 'kfree' makes pointer from integer without a cast

Fixes 3af5f0f5c74e ("net: korina: fix kfree of rx/tx descriptor array")
---
 drivers/net/ethernet/korina.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/net/ethernet/korina.c +2 -2
index 3954c80f70fcb..b491de946a0e6 100644
@@ -1188,7 +1188,7 @@ static int korina_probe(struct platform_device *pdev)
 	return rc;
 
 probe_err_register:
-	kfree(KSEG0ADDR(lp->td_ring));
+	kfree((struct dma_desc *)KSEG0ADDR(lp->td_ring));
 probe_err_td_ring:
 	iounmap(lp->tx_dma_regs);
 probe_err_dma_tx:
@@ -1208,7 +1208,7 @@ static int korina_remove(struct platform_device *pdev)
 	iounmap(lp->eth_regs);
 	iounmap(lp->rx_dma_regs);
 	iounmap(lp->tx_dma_regs);
-	kfree(KSEG0ADDR(lp->td_ring));
+	kfree((struct dma_desc *)KSEG0ADDR(lp->td_ring));
 
 	unregister_netdev(bif->dev);
 	free_netdev(bif->dev);
Signature · 1 line
2.25.1
author maintainer
#111 lore raw

PATCH 111/112 usb: cdc-acm: add quirk to blacklist ETAS ES58X devices

In reply to Greg Kroah-Hartman

From: Vincent Mailhol <[email protected]>

commit a4f88430af896bf34ec25a7a5f0e053fb3d928e0 upstream.

The ES58X devices has a CDC ACM interface (used for debug
purpose). During probing, the device is thus recognized as USB Modem (CDC ACM), preventing the etas-es58x module to load:
usbcore: registered new interface driver etas_es58x
usb 1-1.1: new full-speed USB device number 14 using xhci_hcd
usb 1-1.1: New USB device found, idVendor=108c, idProduct=0159, bcdDevice= 1.00 usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-1.1: Product: ES581.4
usb 1-1.1: Manufacturer: ETAS GmbH
usb 1-1.1: SerialNumber: 2204355
cdc_acm 1-1.1:1.0: No union descriptor, testing for castrated device cdc_acm 1-1.1:1.0: ttyACM0: USB ACM device

Thus, these have been added to the ignore list in
drivers/usb/class/cdc-acm.c

N.B. Future firmware release of the ES58X will remove the CDC-ACM interface.

lsusb -v of the three devices variant (ES581.4, ES582.1 and ES584.1):

Bus 001 Device 011: ID 108c:0159 Robert Bosch GmbH ES581.4 Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 2 Communications
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x108c Robert Bosch GmbH
idProduct 0x0159
bcdDevice 1.00
iManufacturer 1 ETAS GmbH
iProduct 2 ES581.4
iSerial 3 2204355
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 0x0035
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 5 Bus Powered Configuration
bmAttributes 0x80
(Bus Powered)
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 2 Communications
bInterfaceSubClass 2 Abstract (modem)
bInterfaceProtocol 0
iInterface 4 ACM Control Interface
CDC Header:
bcdCDC 1.10
CDC Call Management:
bmCapabilities 0x01
call management
bDataInterface 0
CDC ACM:
bmCapabilities 0x06
sends break
line coding and serial state
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0010 1x 16 bytes
bInterval 10
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Device Status: 0x0000
(Bus Powered)

Bus 001 Device 012: ID 108c:0168 Robert Bosch GmbH ES582 Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 2 Communications
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x108c Robert Bosch GmbH
idProduct 0x0168
bcdDevice 1.00
iManufacturer 1 ETAS GmbH
iProduct 2 ES582
iSerial 3 0108933
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 0x0043
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 2 Communications
bInterfaceSubClass 2 Abstract (modem)
bInterfaceProtocol 1 AT-commands (v.25ter)
iInterface 0
CDC Header:
bcdCDC 1.10
CDC ACM:
bmCapabilities 0x02
line coding and serial state
CDC Union:
bMasterInterface 0
bSlaveInterface 1
CDC Call Management:
bmCapabilities 0x03
call management
use DataInterface
bDataInterface 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 16
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 10 CDC Data
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 2 Communications
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)

Bus 001 Device 013: ID 108c:0169 Robert Bosch GmbH ES584.1 Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 2 Communications
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x108c Robert Bosch GmbH
idProduct 0x0169
bcdDevice 1.00
iManufacturer 1 ETAS GmbH
iProduct 2 ES584.1
iSerial 3 0100320
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 0x0043
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 2 Communications
bInterfaceSubClass 2 Abstract (modem)
bInterfaceProtocol 1 AT-commands (v.25ter)
iInterface 0
CDC Header:
bcdCDC 1.10
CDC ACM:
bmCapabilities 0x02
line coding and serial state
CDC Union:
bMasterInterface 0
bSlaveInterface 1
CDC Call Management:
bmCapabilities 0x03
call management
use DataInterface
bDataInterface 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 16
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 10 CDC Data
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 2 Communications
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)

---
 drivers/usb/class/cdc-acm.c |   11 +++++++++++
 1 file changed, 11 insertions(+)
drivers/usb/class/cdc-acm.c +11 -0
@@ -1897,6 +1897,17 @@ static const struct usb_device_id acm_id
 	.driver_info = IGNORE_DEVICE,
 	},
 
+	/* Exclude ETAS ES58x */
+	{ USB_DEVICE(0x108c, 0x0159), /* ES581.4 */
+	.driver_info = IGNORE_DEVICE,
+	},
+	{ USB_DEVICE(0x108c, 0x0168), /* ES582.1 */
+	.driver_info = IGNORE_DEVICE,
+	},
+	{ USB_DEVICE(0x108c, 0x0169), /* ES584.1 */
+	.driver_info = IGNORE_DEVICE,
+	},
+
 	{ USB_DEVICE(0x1bc7, 0x0021), /* Telit 3G ACM only composition */
 	.driver_info = SEND_ZERO_PACKET,
 	},
author maintainer
#112 lore raw

PATCH 112/112 USB: cdc-wdm: Make wdm_flush() interruptible and add wdm_fsync().

In reply to Greg Kroah-Hartman

From: Oliver Neukum <[email protected]>

commit 37d2a36394d954413a495da61da1b2a51ecd28ab upstream.

syzbot is reporting hung task at wdm_flush() [1], for there is a circular dependency that wdm_flush() from flip_close() for /dev/cdc-wdm0 forever waits for /dev/raw-gadget to be closed while close() for /dev/raw-gadget cannot be called unless close() for /dev/cdc-wdm0 completes.

Tetsuo Handa considered that such circular dependency is an usage error [2] which corresponds to an unresponding broken hardware [3]. But Alan Stern responded that we should be prepared for such hardware [4]. Therefore, this patch changes wdm_flush() to use wait_event_interruptible_timeout() which gives up after 30 seconds, for hardware that remains silent must be ignored. The 30 seconds are coming out of thin air.

Changing wait_event() to wait_event_interruptible_timeout() makes error reporting from close() syscall less reliable. To compensate it, this patch also implements wdm_fsync() which does not use timeout. Those who want to be very sure that data has gone out to the device are now advised to call fsync(), with a caveat that fsync() can return -EINVAL when running on older kernels which do not implement wdm_fsync().

This patch also fixes three more problems (listed below) found during exhaustive discussion and testing.

Since multiple threads can concurrently call wdm_write()/wdm_flush(), we need to use wake_up_all() whenever clearing WDM_IN_USE in order to make sure that all waiters are woken up. Also, error reporting needs to use fetch-and-clear approach in order not to report same error for multiple times.

Since wdm_flush() checks WDM_DISCONNECTING, wdm_write() should as well check WDM_DISCONNECTING.

In wdm_flush(), since locks are not held, it is not safe to dereference desc->intf after checking that WDM_DISCONNECTING is not set [5]. Thus, remove dev_err() from wdm_flush().

[1] https://syzkaller.appspot.com/bug?id=e7b761593b23eb50855b9ea31e3be5472b711186
[2] https://lkml.kernel.org/r/[email protected]
[3] https://lkml.kernel.org/r/[email protected]
[4] https://lkml.kernel.org/r/[email protected]
[5] https://lkml.kernel.org/r/[email protected]

---
 drivers/usb/class/cdc-wdm.c |   72 +++++++++++++++++++++++++++++++++-----------
 1 file changed, 55 insertions(+), 17 deletions(-)
drivers/usb/class/cdc-wdm.c +55 -17
@@ -61,6 +61,9 @@ MODULE_DEVICE_TABLE (usb, wdm_ids);
 
 #define WDM_MAX			16
 
+/* we cannot wait forever at flush() */
+#define WDM_FLUSH_TIMEOUT	(30 * HZ)
+
 /* CDC-WMC r1.1 requires wMaxCommand to be "at least 256 decimal (0x100)" */
 #define WDM_DEFAULT_BUFSIZE	256
 
@@ -151,7 +154,7 @@ static void wdm_out_callback(struct urb
 	kfree(desc->outbuf);
 	desc->outbuf = NULL;
 	clear_bit(WDM_IN_USE, &desc->flags);
-	wake_up(&desc->wait);
+	wake_up_all(&desc->wait);
 }
 
 static void wdm_in_callback(struct urb *urb)
@@ -382,6 +385,9 @@ static ssize_t wdm_write
 	if (test_bit(WDM_RESETTING, &desc->flags))
 		r = -EIO;
 
+	if (test_bit(WDM_DISCONNECTING, &desc->flags))
+		r = -ENODEV;
+
 	if (r < 0) {
 		rv = r;
 		goto out_free_mem_pm;
@@ -413,6 +419,7 @@ static ssize_t wdm_write
 	if (rv < 0) {
 		desc->outbuf = NULL;
 		clear_bit(WDM_IN_USE, &desc->flags);
+		wake_up_all(&desc->wait); /* for wdm_wait_for_response() */
 		dev_err(&desc->intf->dev, "Tx URB error: %d\n", rv);
 		rv = usb_translate_errors(rv);
 		goto out_free_mem_pm;
@@ -573,28 +580,58 @@ err:
 	return rv;
 }
 
-static int wdm_flush(struct file *file, fl_owner_t id)
+static int wdm_wait_for_response(struct file *file, long timeout)
 {
 	struct wdm_device *desc = file->private_data;
+	long rv; /* Use long here because (int) MAX_SCHEDULE_TIMEOUT < 0. */
 
-	wait_event(desc->wait,
-			/*
-			 * needs both flags. We cannot do with one
-			 * because resetting it would cause a race
-			 * with write() yet we need to signal
-			 * a disconnect
-			 */
-			!test_bit(WDM_IN_USE, &desc->flags) ||
-			test_bit(WDM_DISCONNECTING, &desc->flags));
-
-	/* cannot dereference desc->intf if WDM_DISCONNECTING */
+	/*
+	 * Needs both flags. We cannot do with one because resetting it would
+	 * cause a race with write() yet we need to signal a disconnect.
+	 */
+	rv = wait_event_interruptible_timeout(desc->wait,
+			      !test_bit(WDM_IN_USE, &desc->flags) ||
+			      test_bit(WDM_DISCONNECTING, &desc->flags),
+			      timeout);
+
+	/*
+	 * To report the correct error. This is best effort.
+	 * We are inevitably racing with the hardware.
+	 */
 	if (test_bit(WDM_DISCONNECTING, &desc->flags))
 		return -ENODEV;
-	if (desc->werr < 0)
-		dev_err(&desc->intf->dev, "Error in flush path: %d\n",
-			desc->werr);
+	if (!rv)
+		return -EIO;
+	if (rv < 0)
+		return -EINTR;
+
+	spin_lock_irq(&desc->iuspin);
+	rv = desc->werr;
+	desc->werr = 0;
+	spin_unlock_irq(&desc->iuspin);
+
+	return usb_translate_errors(rv);
 
-	return usb_translate_errors(desc->werr);
+}
+
+/*
+ * You need to send a signal when you react to malicious or defective hardware.
+ * Also, don't abort when fsync() returned -EINVAL, for older kernels which do
+ * not implement wdm_flush() will return -EINVAL.
+ */
+static int wdm_fsync(struct file *file, loff_t start, loff_t end, int datasync)
+{
+	return wdm_wait_for_response(file, MAX_SCHEDULE_TIMEOUT);
+}
+
+/*
+ * Same with wdm_fsync(), except it uses finite timeout in order to react to
+ * malicious or defective hardware which ceased communication after close() was
+ * implicitly called due to process termination.
+ */
+static int wdm_flush(struct file *file, fl_owner_t id)
+{
+	return wdm_wait_for_response(file, WDM_FLUSH_TIMEOUT);
 }
 
 static unsigned int wdm_poll(struct file *file, struct poll_table_struct *wait)
@@ -719,6 +756,7 @@ static const struct file_operations wdm_
 	.owner =	THIS_MODULE,
 	.read =		wdm_read,
 	.write =	wdm_write,
+	.fsync =	wdm_fsync,
 	.open =		wdm_open,
 	.flush =	wdm_flush,
 	.release =	wdm_release,

A message that is not in the archive (sent off-list or not yet received): [email protected]

#114 lore raw
Quoted 6 lines · Guenter Roeck
Quoted 5 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 4.4.241 release. There are 112 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Quoted 9 lines
Quoted 3 lines

Responses should be made by Thu, 29 Oct 2020 13:48:36 +0000. Anything received after that time might be too late.

Build results:

	total: 165 pass: 165 fail: 0
Qemu test results:
	total: 332 pass: 332 fail: 0

Did anyone receive the original e-mail ? Looks like I have been tagged as spammer, and I am having trouble sending e-mails.

Guenter

#115 lore raw

Hello!

Quoted 11 lines · Guenter Roeck
Quoted 10 lines · Guenter Roeck
Quoted 8 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 4.4.241 release. There are 112 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Thu, 29 Oct 2020 13:48:36 +0000. Anything received after that time might be too late.

Quoted 8 lines
Quoted 5 lines

Build results:

      total: 165 pass: 165 fail: 0
Qemu test results:
      total: 332 pass: 332 fail: 0

Did anyone receive the original e-mail ? Looks like I have been tagged as spammer, and I am having trouble sending e-mails.

If the original is from 3.5 hours ago, yeah, we got it. I'm not seeing lore updated, but that's probably another issue.

Greetings!

Daniel Díaz
[email protected]

#116 lore raw
Quoted 20 lines · Daniel Díaz

Hello!

Quoted 17 lines · Guenter Roeck
Quoted 15 lines · Guenter Roeck
Quoted 8 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 4.4.241 release. There are 112 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Thu, 29 Oct 2020 13:48:36 +0000. Anything received after that time might be too late.

Build results:

      total: 165 pass: 165 fail: 0
Qemu test results:
      total: 332 pass: 332 fail: 0
Quoted 6 lines
Quoted 2 lines

Did anyone receive the original e-mail ? Looks like I have been tagged as spammer, and I am having trouble sending e-mails.

If the original is from 3.5 hours ago, yeah, we got it. I'm not seeing lore updated, but that's probably another issue.

Thanks. Greg KH mentioned that lore.kernel.org was down. I got lots of "undeliverable" messages back, same as yesterday for a different e-mail. In that case no one received it, so I thought the same happened again.

Guenter

Tested-by on the v1 series
#117 lore raw
In reply to Greg Kroah-Hartman
Quoted 7 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 4.4.241 release. There are 112 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Thu, 29 Oct 2020 13:48:36 +0000. Anything received after that time might be too late.

https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/pipelines/208235853

It shows failed compilation, but that seems to be test problem, not a real problem. So... no problems detected by CIP project.

Best regards,
Pavel

Signature · 2 lines
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Tested-by Linux Kernel Functional Testing on the v1 series
#118 lore raw
In reply to Greg Kroah-Hartman
Quoted 10 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 4.4.241 release. There are 112 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Thu, 29 Oct 2020 13:48:36 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

Quoted 9 lines
        https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.241-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.4.y
and the diffstat can be found below.

thanks,

greg k-h

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Summary
------------------------------------------------------------------------

kernel: 4.4.241-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.4.y
git commit: b3d9b0c29dc82606492af20d03760fb07876eb22
git describe: v4.4.240-113-gb3d9b0c29dc8
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-4.4.y/build/v4.4.240-113-gb3d9b0c29dc8

No regressions (compared to build v4.4.240)

No fixes (compared to build v4.4.240)

Ran 7633 total tests in the following environments and test suites.

Environments
--------------
- i386
- juno-r2 - arm64
- qemu_arm
- qemu_arm64
- qemu_i386
- qemu_x86_64
- x15 - arm
- x86_64
- x86-kasan

Test Suites
-----------
* build
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-containers-tests
* ltp-controllers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-tracing-tests
* network-basic-tests
* v4l2-compliance
* ltp-commands-tests
* ltp-cve-tests
* ltp-fs-tests
* ltp-math-tests
* install-android-platform-tools-r2600
* perf

Summary
------------------------------------------------------------------------

kernel: 4.4.241-rc1
git repo: https://git.linaro.org/lkft/arm64-stable-rc.git
git branch: 4.4.241-rc1-hikey-20201027-837
git commit: 7aa5c99e548c0f8522c9c04b9f489957aee944b9
git describe: 4.4.241-rc1-hikey-20201027-837
Test details: https://qa-reports.linaro.org/lkft/linaro-hikey-stable-rc-4.4-oe/build/4.4.241-rc1-hikey-20201027-837

No regressions (compared to build 4.4.241-rc1-hikey-20201024-836)

No fixes (compared to build 4.4.241-rc1-hikey-20201024-836)

Ran 1748 total tests in the following environments and test suites.

Environments
--------------
- hi6220-hikey - arm64

Test Suites
-----------
* build
* install-android-platform-tools-r2600
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-cpuhotplug-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* perf
* v4l2-compliance

Signature · 2 lines
Linaro LKFT
https://lkft.linaro.org
maintainer Tested-by on the v1 series
#119 lore raw
In reply to Greg Kroah-Hartman
Quoted 9 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 4.4.241 release. There are 112 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Thu, 29 Oct 2020 13:48:36 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

Quoted 8 lines
	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.241-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.4.y
and the diffstat can be found below.

thanks,

greg k-h

All tests passing for Tegra ...

Test results for stable-v4.4:

    6 builds:	6 pass, 0 fail
    12 boots:	12 pass, 0 fail
    25 tests:	25 pass, 0 fail

Linux version: 4.4.241-rc1-gb3d9b0c29dc8
Boards tested: tegra124-jetson-tk1, tegra20-ventana,

                tegra30-cardhu-a04

Jon