4.14.203-rc1 review

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 drivers/net/ethernet/ibm/ibmveth.c |   10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

drivers/net/ethernet/ibm/ibmveth.c +5 -5

@@ -1366,16 +1366,16 @@ static int ibmveth_poll(struct napi_stru
 			skb_put(skb, length);
 			skb->protocol = eth_type_trans(skb, netdev);
 
-			if (csum_good) {
-				skb->ip_summed = CHECKSUM_UNNECESSARY;
-				ibmveth_rx_csum_helper(skb, adapter);
-			}
-
 			if (length > netdev->mtu + ETH_HLEN) {
 				ibmveth_rx_mss_helper(skb, mss, lrg_pkt);
 				adapter->rx_large_packets++;
 			}
 
+			if (csum_good) {
+				skb->ip_summed = CHECKSUM_UNNECESSARY;
+				ibmveth_rx_csum_helper(skb, adapter);
+			}
+
 			napi_gro_receive(napi, skb);	/* send it up */
 
 			netdev->stats.rx_packets++;

Greg Kroah-Hartman

author maintainer

2020-10-27 14:08 UTC #2 lore raw

PATCH 2/191 ibmveth: Identify ingress large send packets.

From: David Wilder <[email protected]>

[ Upstream commit 413f142cc05cb03f2d1ea83388e40c1ddc0d74e9 ]

Ingress large send packets are identified by either:
The IBMVETH_RXQ_LRG_PKT flag in the receive buffer
or with a -1 placed in the ip header checksum.
The method used depends on firmware version. Frame geometry and sufficient header validation is performed by the hypervisor eliminating the need for further header checks here.

Fixes 7b5967389f5a ("ibmveth: set correct gso_size and gso_type")

Signed-off-by David Wilder <[email protected]>

Reviewed-by Thomas Falcon <[email protected]>

Reviewed-by Cristobal Forno <[email protected]>

Reviewed-by Pradeep Satyanarayana <[email protected]>

Acked-by Willem de Bruijn <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 drivers/net/ethernet/ibm/ibmveth.c |   13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

drivers/net/ethernet/ibm/ibmveth.c +12 -1

@@ -1330,6 +1330,7 @@ static int ibmveth_poll(struct napi_stru
 			int offset = ibmveth_rxq_frame_offset(adapter);
 			int csum_good = ibmveth_rxq_csum_good(adapter);
 			int lrg_pkt = ibmveth_rxq_large_packet(adapter);
+			__sum16 iph_check = 0;
 
 			skb = ibmveth_rxq_get_buffer(adapter);

@@ -1366,7 +1367,17 @@ static int ibmveth_poll(struct napi_stru
 			skb_put(skb, length);
 			skb->protocol = eth_type_trans(skb, netdev);
 
-			if (length > netdev->mtu + ETH_HLEN) {
+			/* PHYP without PLSO support places a -1 in the ip
+			 * checksum for large send frames.
+			 */
+			if (skb->protocol == cpu_to_be16(ETH_P_IP)) {
+				struct iphdr *iph = (struct iphdr *)skb->data;
+
+				iph_check = iph->check;
+			}
+
+			if ((length > netdev->mtu + ETH_HLEN) ||
+			    lrg_pkt || iph_check == 0xffff) {
 				ibmveth_rx_mss_helper(skb, mss, lrg_pkt);
 				adapter->rx_large_packets++;
 			}

Greg Kroah-Hartman

author maintainer

2020-10-27 14:11 UTC #3 lore raw

PATCH 3/191 ipv4: Restore flowi4_oif update before call to xfrm_lookup_route

From: David Ahern <[email protected]>

[ Upstream commit 874fb9e2ca949b443cc419a4f2227cafd4381d39 ]

Tobias reported regressions in IPsec tests following the patch referenced by the Fixes tag below. The root cause is dropping the reset of the flowi4_oif after the fib_lookup. Apparently it is needed for xfrm cases, so restore the oif update to ip_route_output_flow right before the call to xfrm_lookup_route.

Fixes 2fbc6e89b2f1 ("ipv4: Update exception handling for multipath routes via same device")

Reported-by Tobias Brunner <[email protected]>

Signed-off-by David Ahern <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 net/ipv4/route.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

net/ipv4/route.c +3 -1

@@ -2603,10 +2603,12 @@ struct rtable *ip_route_output_flow(stru
 	if (IS_ERR(rt))
 		return rt;
 
-	if (flp4->flowi4_proto)
+	if (flp4->flowi4_proto) {
+		flp4->flowi4_oif = rt->dst.dev->ifindex;
 		rt = (struct rtable *)xfrm_lookup_route(net, &rt->dst,
 							flowi4_to_flowi(flp4),
 							sk, 0);
+	}
 
 	return rt;
 }

Greg Kroah-Hartman

author maintainer

2020-10-27 14:11 UTC #4 lore raw

PATCH 4/191 mlx4: handle non-napi callers to napi_poll

From: Jonathan Lemon <[email protected]>

[ Upstream commit b2b8a92733b288128feb57ffa694758cf475106c ]

netcons calls napi_poll with a budget of 0 to transmit packets. Handle this by:
- skipping RX processing
- do not try to recycle TX packets to the RX cache

Signed-off-by Jonathan Lemon <[email protected]>

Reviewed-by Tariq Toukan <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 drivers/net/ethernet/mellanox/mlx4/en_rx.c |    3 +++
 drivers/net/ethernet/mellanox/mlx4/en_tx.c |    2 +-
 2 files changed, 4 insertions(+), 1 deletion(-)

drivers/net/ethernet/mellanox/mlx4/en_rx.c +3 -0

@@ -948,6 +948,9 @@ int mlx4_en_poll_rx_cq(struct napi_struc
 	bool clean_complete = true;
 	int done;
 
+	if (!budget)
+		return 0;
+
 	if (priv->tx_ring_num[TX_XDP]) {
 		xdp_tx_cq = priv->tx_cq[TX_XDP][cq->ring];
 		if (xdp_tx_cq->xdp_busy) {

drivers/net/ethernet/mellanox/mlx4/en_tx.c +1 -1

@@ -343,7 +343,7 @@ u32 mlx4_en_recycle_tx_desc(struct mlx4_
 		.dma = tx_info->map0_dma,
 	};
 
-	if (!mlx4_en_rx_recycle(ring->recycle_ring, &frame)) {
+	if (!napi_mode || !mlx4_en_rx_recycle(ring->recycle_ring, &frame)) {
 		dma_unmap_page(priv->ddev, tx_info->map0_dma,
 			       PAGE_SIZE, priv->dma_dir);
 		put_page(tx_info->page);

Greg Kroah-Hartman

author maintainer

2020-10-27 14:09 UTC #5 lore raw

PATCH 5/191 net: usb: qmi_wwan: add Cellient MPL200 card

From: Wilken Gottwalt <[email protected]>

[ Upstream commit 28802e7c0c9954218d1830f7507edc9d49b03a00 ]

Add usb ids of the Cellient MPL200 card.

Signed-off-by Wilken Gottwalt <[email protected]>

Acked-by Bjørn Mork <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 drivers/net/usb/qmi_wwan.c |    1 +
 1 file changed, 1 insertion(+)

drivers/net/usb/qmi_wwan.c +1 -0

@@ -1301,6 +1301,7 @@ static const struct usb_device_id produc
 	{QMI_QUIRK_SET_DTR(0x2cb7, 0x0104, 4)},	/* Fibocom NL678 series */
 	{QMI_FIXED_INTF(0x0489, 0xe0b4, 0)},	/* Foxconn T77W968 LTE */
 	{QMI_FIXED_INTF(0x0489, 0xe0b5, 0)},	/* Foxconn T77W968 LTE with eSIM support*/
+	{QMI_FIXED_INTF(0x2692, 0x9025, 4)},    /* Cellient MPL200 (rebranded Qualcomm 05c6:9025) */
 
 	/* 4. Gobi 1000 devices */
 	{QMI_GOBI1K_DEVICE(0x05c6, 0x9212)},	/* Acer Gobi Modem Device */

Greg Kroah-Hartman

author maintainer

2020-10-27 14:11 UTC #6 lore raw

PATCH 6/191 tipc: fix the skb_unshare() in tipc_buf_append()

From: Cong Wang <[email protected]>

[ Upstream commit ed42989eab57d619667d7e87dfbd8fe207db54fe ]

skb_unshare() drops a reference count on the old skb unconditionally, so in the failure case, we end up freeing the skb twice here. And because the skb is allocated in fclone and cloned by caller tipc_msg_reassemble(), the consequence is actually freeing the original skb too, thus triggered the UAF by syzbot.

Fix this by replacing this skb_unshare() with skb_cloned()+skb_copy().

Fixes ff48b6222e65 ("tipc: use skb_unshare() instead in tipc_buf_append()")

Reported-and-tested-by [email protected]

Cc Jon Maloy <[email protected]>

Cc Ying Xue <[email protected]>

Signed-off-by Cong Wang <[email protected]>

Reviewed-by Xin Long <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 net/tipc/msg.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

net/tipc/msg.c +2 -1

@@ -140,7 +140,8 @@ int tipc_buf_append(struct sk_buff **hea
 	if (fragid == FIRST_FRAGMENT) {
 		if (unlikely(head))
 			goto err;
-		frag = skb_unshare(frag, GFP_ATOMIC);
+		if (skb_cloned(frag))
+			frag = skb_copy(frag, GFP_ATOMIC);
 		if (unlikely(!frag))
 			goto err;
 		head = *headbuf = frag;

Greg Kroah-Hartman

author maintainer

2020-10-27 18:18 UTC #7 lore raw

PATCH 7/191 net/ipv4: always honour route mtu during forwarding

From: "Maciej Żenczykowski" <[email protected]>

[ Upstream commit 02a1b175b0e92d9e0fa5df3957ade8d733ceb6a0 ]

Documentation/networking/ip-sysctl.txt:46 says:
ip_forward_use_pmtu - BOOLEAN
By default we don't trust protocol path MTUs while forwarding because they could be easily forged and can lead to unwanted fragmentation by the router.
You only need to enable this if you have user-space software which tries to discover path mtus by itself and depends on the kernel honoring this information. This is normally not the case.
Default: 0 (disabled)
Possible values:
0 - disabled
1 - enabled

Which makes it pretty clear that setting it to 1 is a potential security/safety/DoS issue, and yet it is entirely reasonable to want forwarded traffic to honour explicitly administrator configured route mtus (instead of defaulting to device mtu).

Indeed, I can't think of a single reason why you wouldn't want to. Since you configured a route mtu you probably know better...

It is pretty common to have a higher device mtu to allow receiving large (jumbo) frames, while having some routes via that interface (potentially including the default route to the internet) specify a lower mtu.

Note that ipv6 forwarding uses device mtu unless the route is locked (in which case it will use the route mtu).

This approach is not usable for IPv4 where an 'mtu lock' on a route also has the side effect of disabling TCP path mtu discovery via disabling the IPv4 DF (don't frag) bit on all outgoing frames.

I'm not aware of a way to lock a route from an IPv6 RA, so that also potentially seems wrong.

Signed-off-by Maciej Żenczykowski <[email protected]>

Cc Eric Dumazet <[email protected]>

Cc Willem de Bruijn <[email protected]>

Cc Lorenzo Colitti <[email protected]>

Cc Sunmeet Gill (Sunny) <[email protected]>

Cc Vinay Paradkar <[email protected]>

Cc Tyler Wear <[email protected]>

Cc David Ahern <[email protected]>

Reviewed-by Eric Dumazet <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 include/net/ip.h |    6 ++++++
 1 file changed, 6 insertions(+)

include/net/ip.h +6 -0

@@ -364,12 +364,18 @@ static inline unsigned int ip_dst_mtu_ma
 						    bool forwarding)
 {
 	struct net *net = dev_net(dst->dev);
+	unsigned int mtu;
 
 	if (net->ipv4.sysctl_ip_fwd_use_pmtu ||
 	    ip_mtu_locked(dst) ||
 	    !forwarding)
 		return dst_mtu(dst);
 
+	/* 'forwarding = true' case should always honour route mtu */
+	mtu = dst_metric_raw(dst, RTAX_MTU);
+	if (mtu)
+		return mtu;
+
 	return min(READ_ONCE(dst->dev->mtu), IP_MAX_MTU);
 }

Greg Kroah-Hartman

author maintainer

2020-10-27 14:11 UTC #8 lore raw

PATCH 8/191 r8169: fix data corruption issue on RTL8402

From: Heiner Kallweit <[email protected]>

[ Upstream commit ef9da46ddef071e1bbb943afbbe9b38771855554 ]

Petr reported that after resume from suspend RTL8402 partially truncates incoming packets, and re-initializing register RxConfig before the actual chip re-initialization sequence is needed to avoid the issue.

Reported-by Petr Tesarik <[email protected]>

Proposed-by Petr Tesarik <[email protected]>

Tested-by Petr Tesarik <[email protected]>

Signed-off-by Heiner Kallweit <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 drivers/net/ethernet/realtek/r8169.c |  108 ++++++++++++++++++-----------------
 1 file changed, 56 insertions(+), 52 deletions(-)

drivers/net/ethernet/realtek/r8169.c +56 ~~-52~~

@@ -4501,6 +4501,58 @@ static void rtl_rar_set(struct rtl8169_p
 	rtl_unlock_work(tp);
 }
 
+static void rtl_init_rxcfg(struct rtl8169_private *tp)
+{
+	void __iomem *ioaddr = tp->mmio_addr;
+
+	switch (tp->mac_version) {
+	case RTL_GIGA_MAC_VER_01:
+	case RTL_GIGA_MAC_VER_02:
+	case RTL_GIGA_MAC_VER_03:
+	case RTL_GIGA_MAC_VER_04:
+	case RTL_GIGA_MAC_VER_05:
+	case RTL_GIGA_MAC_VER_06:
+	case RTL_GIGA_MAC_VER_10:
+	case RTL_GIGA_MAC_VER_11:
+	case RTL_GIGA_MAC_VER_12:
+	case RTL_GIGA_MAC_VER_13:
+	case RTL_GIGA_MAC_VER_14:
+	case RTL_GIGA_MAC_VER_15:
+	case RTL_GIGA_MAC_VER_16:
+	case RTL_GIGA_MAC_VER_17:
+		RTL_W32(RxConfig, RX_FIFO_THRESH | RX_DMA_BURST);
+		break;
+	case RTL_GIGA_MAC_VER_18:
+	case RTL_GIGA_MAC_VER_19:
+	case RTL_GIGA_MAC_VER_20:
+	case RTL_GIGA_MAC_VER_21:
+	case RTL_GIGA_MAC_VER_22:
+	case RTL_GIGA_MAC_VER_23:
+	case RTL_GIGA_MAC_VER_24:
+	case RTL_GIGA_MAC_VER_34:
+	case RTL_GIGA_MAC_VER_35:
+		RTL_W32(RxConfig, RX128_INT_EN | RX_MULTI_EN | RX_DMA_BURST);
+		break;
+	case RTL_GIGA_MAC_VER_40:
+	case RTL_GIGA_MAC_VER_41:
+	case RTL_GIGA_MAC_VER_42:
+	case RTL_GIGA_MAC_VER_43:
+	case RTL_GIGA_MAC_VER_44:
+	case RTL_GIGA_MAC_VER_45:
+	case RTL_GIGA_MAC_VER_46:
+	case RTL_GIGA_MAC_VER_47:
+	case RTL_GIGA_MAC_VER_48:
+	case RTL_GIGA_MAC_VER_49:
+	case RTL_GIGA_MAC_VER_50:
+	case RTL_GIGA_MAC_VER_51:
+		RTL_W32(RxConfig, RX128_INT_EN | RX_MULTI_EN | RX_DMA_BURST | RX_EARLY_OFF);
+		break;
+	default:
+		RTL_W32(RxConfig, RX128_INT_EN | RX_DMA_BURST);
+		break;
+	}
+}
+
 static int rtl_set_mac_address(struct net_device *dev, void *p)
 {
 	struct rtl8169_private *tp = netdev_priv(dev);

@@ -4519,6 +4571,10 @@ static int rtl_set_mac_address(struct ne
 
 	pm_runtime_put_noidle(d);
 
+	/* Reportedly at least Asus X453MA truncates packets otherwise */
+	if (tp->mac_version == RTL_GIGA_MAC_VER_37)
+		rtl_init_rxcfg(tp);
+
 	return 0;
 }

@@ -4955,58 +5011,6 @@ static void rtl_init_pll_power_ops(struc
 		break;
 	}
 }
-
-static void rtl_init_rxcfg(struct rtl8169_private *tp)
-{
-	void __iomem *ioaddr = tp->mmio_addr;
-
-	switch (tp->mac_version) {
-	case RTL_GIGA_MAC_VER_01:
-	case RTL_GIGA_MAC_VER_02:
-	case RTL_GIGA_MAC_VER_03:
-	case RTL_GIGA_MAC_VER_04:
-	case RTL_GIGA_MAC_VER_05:
-	case RTL_GIGA_MAC_VER_06:
-	case RTL_GIGA_MAC_VER_10:
-	case RTL_GIGA_MAC_VER_11:
-	case RTL_GIGA_MAC_VER_12:
-	case RTL_GIGA_MAC_VER_13:
-	case RTL_GIGA_MAC_VER_14:
-	case RTL_GIGA_MAC_VER_15:
-	case RTL_GIGA_MAC_VER_16:
-	case RTL_GIGA_MAC_VER_17:
-		RTL_W32(RxConfig, RX_FIFO_THRESH | RX_DMA_BURST);
-		break;
-	case RTL_GIGA_MAC_VER_18:
-	case RTL_GIGA_MAC_VER_19:
-	case RTL_GIGA_MAC_VER_20:
-	case RTL_GIGA_MAC_VER_21:
-	case RTL_GIGA_MAC_VER_22:
-	case RTL_GIGA_MAC_VER_23:
-	case RTL_GIGA_MAC_VER_24:
-	case RTL_GIGA_MAC_VER_34:
-	case RTL_GIGA_MAC_VER_35:
-		RTL_W32(RxConfig, RX128_INT_EN | RX_MULTI_EN | RX_DMA_BURST);
-		break;
-	case RTL_GIGA_MAC_VER_40:
-	case RTL_GIGA_MAC_VER_41:
-	case RTL_GIGA_MAC_VER_42:
-	case RTL_GIGA_MAC_VER_43:
-	case RTL_GIGA_MAC_VER_44:
-	case RTL_GIGA_MAC_VER_45:
-	case RTL_GIGA_MAC_VER_46:
-	case RTL_GIGA_MAC_VER_47:
-	case RTL_GIGA_MAC_VER_48:
-	case RTL_GIGA_MAC_VER_49:
-	case RTL_GIGA_MAC_VER_50:
-	case RTL_GIGA_MAC_VER_51:
-		RTL_W32(RxConfig, RX128_INT_EN | RX_MULTI_EN | RX_DMA_BURST | RX_EARLY_OFF);
-		break;
-	default:
-		RTL_W32(RxConfig, RX128_INT_EN | RX_DMA_BURST);
-		break;
-	}
-}
 
 static void rtl8169_init_ring_indexes(struct rtl8169_private *tp)
 {

Greg Kroah-Hartman

author maintainer

2020-10-27 14:11 UTC #9 lore raw

PATCH 9/191 binder: fix UAF when releasing todo list

From: Todd Kjos <[email protected]>

commit f3277cbfba763cd2826396521b9296de67cf1bbc upstream.

When releasing a thread todo list when tearing down a binder_proc, the following race was possible which could result in a use-after-free:

1.  Thread 1: enter binder_release_work from binder_thread_release
2.  Thread 2: binder_update_ref_for_handle() -> binder_dec_node_ilocked()
3.  Thread 2: dec nodeA --> 0 (will free node)
4.  Thread 1: ACQ inner_proc_lock
5.  Thread 2: block on inner_proc_lock
6.  Thread 1: dequeue work (BINDER_WORK_NODE, part of nodeA)
7.  Thread 1: REL inner_proc_lock
8.  Thread 2: ACQ inner_proc_lock
9.  Thread 2: todo list cleanup, but work was already dequeued

10. Thread 2: free node
11. Thread 2: REL inner_proc_lock
12. Thread 1: deref w->type (UAF)

The problem was that for a BINDER_WORK_NODE, the binder_work element must not be accessed after releasing the inner_proc_lock while processing the todo list elements since another thread might be handling a deref on the node containing the binder_work element leading to the node being freed.

Signed-off-by Todd Kjos <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Cc <[email protected]> # 4.14, 4.19, 5.4, 5.8

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 drivers/android/binder.c |   35 ++++++++++-------------------------
 1 file changed, 10 insertions(+), 25 deletions(-)

drivers/android/binder.c +10 ~~-25~~

@@ -286,7 +286,7 @@ struct binder_device {
 struct binder_work {
 	struct list_head entry;
 
-	enum {
+	enum binder_work_type {
 		BINDER_WORK_TRANSACTION = 1,
 		BINDER_WORK_TRANSACTION_COMPLETE,
 		BINDER_WORK_RETURN_ERROR,

@@ -850,27 +850,6 @@ static struct binder_work *binder_dequeu
 	return w;
 }
 
-/**
- * binder_dequeue_work_head() - Dequeues the item at head of list
- * @proc:         binder_proc associated with list
- * @list:         list to dequeue head
- *
- * Removes the head of the list if there are items on the list
- *
- * Return: pointer dequeued binder_work, NULL if list was empty
- */
-static struct binder_work *binder_dequeue_work_head(
-					struct binder_proc *proc,
-					struct list_head *list)
-{
-	struct binder_work *w;
-
-	binder_inner_proc_lock(proc);
-	w = binder_dequeue_work_head_ilocked(list);
-	binder_inner_proc_unlock(proc);
-	return w;
-}
-
 static void
 binder_defer_work(struct binder_proc *proc, enum binder_deferred_state defer);
 static void binder_free_thread(struct binder_thread *thread);

@@ -4162,13 +4141,17 @@ static void binder_release_work(struct b
 				struct list_head *list)
 {
 	struct binder_work *w;
+	enum binder_work_type wtype;
 
 	while (1) {
-		w = binder_dequeue_work_head(proc, list);
+		binder_inner_proc_lock(proc);
+		w = binder_dequeue_work_head_ilocked(list);
+		wtype = w ? w->type : 0;
+		binder_inner_proc_unlock(proc);
 		if (!w)
 			return;
 
-		switch (w->type) {
+		switch (wtype) {
 		case BINDER_WORK_TRANSACTION: {
 			struct binder_transaction *t;

@@ -4202,9 +4185,11 @@ static void binder_release_work(struct b
 			kfree(death);
 			binder_stats_deleted(BINDER_STAT_DEATH);
 		} break;
+		case BINDER_WORK_NODE:
+			break;
 		default:
 			pr_err("unexpected work type, %d, not freed\n",
-			       w->type);
+			       wtype);
 			break;
 		}
 	}

Greg Kroah-Hartman

author maintainer

2020-10-27 14:08 UTC #10 lore raw

PATCH 10/191 ALSA: bebob: potential info leak in hwdep_read()

From: Dan Carpenter <[email protected]>

commit b41c15f4e1c1f1657da15c482fa837c1b7384452 upstream.

The "count" variable needs to be capped on every path so that we don't copy too much information to the user.

Fixes 618eabeae711 ("ALSA: bebob: Add hwdep interface")

Link https://lore.kernel.org/r/20201007074928.GA2529578@mwanda open here

Acked-by Takashi Sakamoto <[email protected]>

Cc <[email protected]>

Signed-off-by Takashi Iwai <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 sound/firewire/bebob/bebob_hwdep.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

sound/firewire/bebob/bebob_hwdep.c +1 -2

@@ -37,12 +37,11 @@ hwdep_read(struct snd_hwdep *hwdep, char
 	}
 
 	memset(&event, 0, sizeof(event));
+	count = min_t(long, count, sizeof(event.lock_status));
 	if (bebob->dev_lock_changed) {
 		event.lock_status.type = SNDRV_FIREWIRE_EVENT_LOCK_STATUS;
 		event.lock_status.status = (bebob->dev_lock_count > 0);
 		bebob->dev_lock_changed = false;
-
-		count = min_t(long, count, sizeof(event.lock_status));
 	}
 
 	spin_unlock_irq(&bebob->lock);

Greg Kroah-Hartman

author maintainer

2020-10-27 14:11 UTC #11 lore raw

PATCH 11/191 net: hdlc: In hdlc_rcv, check to make sure dev is an HDLC device

From: Xie He <[email protected]>

[ Upstream commit 01c4ceae0a38a0bdbfea6896f41efcd985a9c064 ]

The hdlc_rcv function is used as hdlc_packet_type.func to process any skb received in the kernel with skb->protocol == htons(ETH_P_HDLC). The purpose of this function is to provide second-stage processing for skbs not assigned a "real" L3 skb->protocol value in the first stage.

This function assumes the device from which the skb is received is an HDLC device (a device created by this module). It assumes that netdev_priv(dev) returns a pointer to "struct hdlc_device".

However, it is possible that some driver in the kernel (not necessarily in our control) submits a received skb with skb->protocol == htons(ETH_P_HDLC), from a non-HDLC device. In this case, the skb would still be received by hdlc_rcv. This will cause problems.

hdlc_rcv should be able to recognize and drop invalid skbs. It should first make sure "dev" is actually an HDLC device, before starting its processing. This patch adds this check to hdlc_rcv.

Fixes 1da177e4c3f4 ("Linux-2.6.12-rc2")

Cc Krzysztof Halasa <[email protected]>

Signed-off-by Xie He <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 drivers/net/wan/hdlc.c |   10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

drivers/net/wan/hdlc.c +9 -1

@@ -49,7 +49,15 @@ static struct hdlc_proto *first_proto;
 static int hdlc_rcv(struct sk_buff *skb, struct net_device *dev,
 		    struct packet_type *p, struct net_device *orig_dev)
 {
-	struct hdlc_device *hdlc = dev_to_hdlc(dev);
+	struct hdlc_device *hdlc;
+
+	/* First make sure "dev" is an HDLC device */
+	if (!(dev->priv_flags & IFF_WAN_HDLC)) {
+		kfree_skb(skb);
+		return NET_RX_SUCCESS;
+	}
+
+	hdlc = dev_to_hdlc(dev);
 
 	if (!net_eq(dev_net(dev), &init_net)) {
 		kfree_skb(skb);

Greg Kroah-Hartman

author maintainer

2020-10-27 14:08 UTC #12 lore raw

PATCH 12/191 net: hdlc_raw_eth: Clear the IFF_TX_SKB_SHARING flag after calling ether_setup

From: Xie He <[email protected]>

[ Upstream commit 5fce1e43e2d5bf2f7e3224d7b99b1c65ab2c26e2 ]

This driver calls ether_setup to set up the network device. The ether_setup function would add the IFF_TX_SKB_SHARING flag to the device. This flag indicates that it is safe to transmit shared skbs to the device.

However, this is not true. This driver may pad the frame (in eth_tx) before transmission, so the skb may be modified.

Fixes 550fd08c2ceb ("net: Audit drivers to identify those needing IFF_TX_SKB_SHARING cleared")

Cc Neil Horman <[email protected]>

Cc Krzysztof Halasa <[email protected]>

Signed-off-by Xie He <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 drivers/net/wan/hdlc_raw_eth.c |    1 +
 1 file changed, 1 insertion(+)

drivers/net/wan/hdlc_raw_eth.c +1 -0

@@ -102,6 +102,7 @@ static int raw_eth_ioctl(struct net_devi
 		old_qlen = dev->tx_queue_len;
 		ether_setup(dev);
 		dev->tx_queue_len = old_qlen;
+		dev->priv_flags &= ~IFF_TX_SKB_SHARING;
 		eth_hw_addr_random(dev);
 		call_netdevice_notifiers(NETDEV_POST_TYPE_CHANGE, dev);
 		netif_dormant_off(dev);

Greg Kroah-Hartman

author maintainer

2020-10-27 14:08 UTC #13 lore raw

PATCH 13/191 nfc: Ensure presence of NFC_ATTR_FIRMWARE_NAME attribute in nfc_genl_fw_download()

From: Defang Bo <[email protected]>

[ Upstream commit 280e3ebdafb863b3cb50d5842f056267e15bf40c ]

Check that the NFC_ATTR_FIRMWARE_NAME attributes are provided by the netlink client prior to accessing them.This prevents potential unhandled NULL pointer dereference exceptions which can be triggered by malicious user-mode programs, if they omit one or both of these attributes.

Similar to commit a0323b979f81 ("nfc: Ensure presence of required attributes in the activate_target handler").

Fixes 9674da8759df ("NFC: Add firmware upload netlink command")

Signed-off-by Defang Bo <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 net/nfc/netlink.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

net/nfc/netlink.c +1 -1

@@ -1224,7 +1224,7 @@ static int nfc_genl_fw_download(struct s
 	u32 idx;
 	char firmware_name[NFC_FIRMWARE_NAME_MAXSIZE + 1];
 
-	if (!info->attrs[NFC_ATTR_DEVICE_INDEX])
+	if (!info->attrs[NFC_ATTR_DEVICE_INDEX] || !info->attrs[NFC_ATTR_FIRMWARE_NAME])
 		return -EINVAL;
 
 	idx = nla_get_u32(info->attrs[NFC_ATTR_DEVICE_INDEX]);

Greg Kroah-Hartman

author maintainer

2020-10-27 14:08 UTC #14 lore raw

PATCH 14/191 tcp: fix to update snd_wl1 in bulk receiver fast path

Link https://www.spinics.net/lists/netdev/msg692430.html

From: Neal Cardwell <[email protected]>

[ Upstream commit 18ded910b589839e38a51623a179837ab4cc3789 ]

In the header prediction fast path for a bulk data receiver, if no data is newly acknowledged then we do not call tcp_ack() and do not call tcp_ack_update_window(). This means that a bulk receiver that receives large amounts of data can have the incoming sequence numbers wrap, so that the check in tcp_may_update_window fails:
after(ack_seq, tp->snd_wl1)

If the incoming receive windows are zero in this state, and then the connection that was a bulk data receiver later wants to send data, that connection can find itself persistently rejecting the window updates in incoming ACKs. This means the connection can persistently fail to discover that the receive window has opened, which in turn means that the connection is unable to send anything, and the connection's sending process can get permanently "stuck".

The fix is to update snd_wl1 in the header prediction fast path for a bulk data receiver, so that it keeps up and does not see wrapping problems.

This fix is based on a very nice and thorough analysis and diagnosis by Apollon Oikonomopoulos (see link below).

This is a stable candidate but there is no Fixes tag here since the bug predates current git history. Just for fun: looks like the bug dates back to when header prediction was added in Linux v2.1.8 in Nov 1996. In that version tcp_rcv_established() was added, and the code only updates snd_wl1 in tcp_ack(), and in the new "Bulk data transfer:
receiver" code path it does not call tcp_ack(). This fix seems to apply cleanly at least as far back as v3.2.

Fixes 1da177e4c3f4 ("Linux-2.6.12-rc2")

Signed-off-by Neal Cardwell <[email protected]>

Reported-by Apollon Oikonomopoulos <[email protected]>

Tested-by Apollon Oikonomopoulos <[email protected]>

Acked-by Soheil Hassas Yeganeh <[email protected]>

Acked-by Yuchung Cheng <[email protected]>

Signed-off-by Eric Dumazet <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 net/ipv4/tcp_input.c |    2 ++
 1 file changed, 2 insertions(+)

net/ipv4/tcp_input.c +2 -0

@@ -5539,6 +5539,8 @@ void tcp_rcv_established(struct sock *sk
 				tcp_data_snd_check(sk);
 				if (!inet_csk_ack_scheduled(sk))
 					goto no_ack;
+			} else {
+				tcp_update_wl(tp, TCP_SKB_CB(skb)->seq);
 			}
 
 			__tcp_ack_snd_check(sk, 0);

Greg Kroah-Hartman

author maintainer

2020-10-27 14:08 UTC #15 lore raw

PATCH 15/191 icmp: randomize the global rate limiter

From: Eric Dumazet <[email protected]>

[ Upstream commit b38e7819cae946e2edf869e604af1e65a5d241c5 ]

Keyu Man reported that the ICMP rate limiter could be used by attackers to get useful signal. Details will be provided in an upcoming academic publication.

Our solution is to add some noise, so that the attackers no longer can get help from the predictable token bucket limiter.

Fixes 4cdf507d5452 ("icmp: add a global rate limitation")

Signed-off-by Eric Dumazet <[email protected]>

Reported-by Keyu Man <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 Documentation/networking/ip-sysctl.txt |    4 +++-
 net/ipv4/icmp.c                        |    7 +++++--
 2 files changed, 8 insertions(+), 3 deletions(-)

Documentation/networking/ip-sysctl.txt +3 -1

@@ -905,12 +905,14 @@ icmp_ratelimit - INTEGER
 icmp_msgs_per_sec - INTEGER
 	Limit maximal number of ICMP packets sent per second from this host.
 	Only messages whose type matches icmp_ratemask (see below) are
-	controlled by this limit.
+	controlled by this limit. For security reasons, the precise count
+	of messages per second is randomized.
 	Default: 1000
 
 icmp_msgs_burst - INTEGER
 	icmp_msgs_per_sec controls number of ICMP packets sent per second,
 	while icmp_msgs_burst controls the burst size of these packets.
+	For security reasons, the precise burst size is randomized.
 	Default: 50
 
 icmp_ratemask - INTEGER

net/ipv4/icmp.c +5 -2

@@ -244,7 +244,7 @@ static struct {
 /**
  * icmp_global_allow - Are we allowed to send one more ICMP message ?
  *
- * Uses a token bucket to limit our ICMP messages to sysctl_icmp_msgs_per_sec.
+ * Uses a token bucket to limit our ICMP messages to ~sysctl_icmp_msgs_per_sec.
  * Returns false if we reached the limit and can not send another packet.
  * Note: called with BH disabled
  */

@@ -272,7 +272,10 @@ bool icmp_global_allow(void)
 	}
 	credit = min_t(u32, icmp_global.credit + incr, sysctl_icmp_msgs_burst);
 	if (credit) {
-		credit--;
+		/* We want to use a credit of one in average, but need to randomize
+		 * it for security reasons.
+		 */
+		credit = max_t(int, credit - prandom_u32_max(3), 0);
 		rc = true;
 	}
 	WRITE_ONCE(icmp_global.credit, credit);

Greg Kroah-Hartman

author maintainer

2020-10-27 14:11 UTC #16 lore raw

PATCH 16/191 cifs: remove bogus debug code

From: Dan Carpenter <[email protected]>

commit d367cb960ce88914898cbfa43645c2e43ede9465 upstream.

The "end" pointer is either NULL or it points to the next byte to parse. If there isn't a next byte then dereferencing "end" is an off-by-one out of bounds error. And, of course, if it's NULL that leads to an Oops. Printing "*end" doesn't seem very useful so let's delete this code.

Also for the last debug statement, I noticed that it should be printing "sequence_end" instead of "end" so fix that as well.

Reported-by Dominik Maier <[email protected]>

Signed-off-by Steve French <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 fs/cifs/asn1.c |   16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

fs/cifs/asn1.c +8 -8

@@ -541,8 +541,8 @@ decode_negTokenInit(unsigned char *secur
 		return 0;
 	} else if ((cls != ASN1_CTX) || (con != ASN1_CON)
 		   || (tag != ASN1_EOC)) {
-		cifs_dbg(FYI, "cls = %d con = %d tag = %d end = %p (%d) exit 0\n",
-			 cls, con, tag, end, *end);
+		cifs_dbg(FYI, "cls = %d con = %d tag = %d end = %p exit 0\n",
+			 cls, con, tag, end);
 		return 0;
 	}

@@ -552,8 +552,8 @@ decode_negTokenInit(unsigned char *secur
 		return 0;
 	} else if ((cls != ASN1_UNI) || (con != ASN1_CON)
 		   || (tag != ASN1_SEQ)) {
-		cifs_dbg(FYI, "cls = %d con = %d tag = %d end = %p (%d) exit 1\n",
-			 cls, con, tag, end, *end);
+		cifs_dbg(FYI, "cls = %d con = %d tag = %d end = %p exit 1\n",
+			 cls, con, tag, end);
 		return 0;
 	}

@@ -563,8 +563,8 @@ decode_negTokenInit(unsigned char *secur
 		return 0;
 	} else if ((cls != ASN1_CTX) || (con != ASN1_CON)
 		   || (tag != ASN1_EOC)) {
-		cifs_dbg(FYI, "cls = %d con = %d tag = %d end = %p (%d) exit 0\n",
-			 cls, con, tag, end, *end);
+		cifs_dbg(FYI, "cls = %d con = %d tag = %d end = %p exit 0\n",
+			 cls, con, tag, end);
 		return 0;
 	}

@@ -575,8 +575,8 @@ decode_negTokenInit(unsigned char *secur
 		return 0;
 	} else if ((cls != ASN1_UNI) || (con != ASN1_CON)
 		   || (tag != ASN1_SEQ)) {
-		cifs_dbg(FYI, "cls = %d con = %d tag = %d end = %p (%d) exit 1\n",
-			 cls, con, tag, end, *end);
+		cifs_dbg(FYI, "cls = %d con = %d tag = %d sequence_end = %p exit 1\n",
+			 cls, con, tag, sequence_end);
 		return 0;
 	}

Greg Kroah-Hartman

author maintainer

2020-10-27 14:11 UTC #17 lore raw

PATCH 17/191 cifs: Return the error from crypt_message when enc/dec key not found.

From: Shyam Prasad N <[email protected]>

commit 0bd294b55a5de442370c29fa53bab17aef3ff318 upstream.

In crypt_message, when smb2_get_enc_key returns error, we need to return the error back to the caller. If not, we end up processing the message further, causing a kernel oops due to unwarranted access of memory.

Call Trace:
smb3_receive_transform+0x120/0x870 [cifs]
cifs_demultiplex_thread+0xb53/0xc20 [cifs]
? cifs_handle_standard+0x190/0x190 [cifs]
kthread+0x116/0x130
? kthread_park+0x80/0x80
ret_from_fork+0x1f/0x30

Signed-off-by Shyam Prasad N <[email protected]>

Reviewed-by Pavel Shilovsky <[email protected]>

Reviewed-by Ronnie Sahlberg <[email protected]>

CC Stable <[email protected]>

Signed-off-by Steve French <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 fs/cifs/smb2ops.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

fs/cifs/smb2ops.c +1 -1

@@ -2305,7 +2305,7 @@ crypt_message(struct TCP_Server_Info *se
 	if (rc) {
 		cifs_dbg(VFS, "%s: Could not get %scryption key\n", __func__,
 			 enc ? "en" : "de");
-		return 0;
+		return rc;
 	}
 
 	rc = smb3_crypto_aead_allocate(server);

Greg Kroah-Hartman

author maintainer

2020-10-27 14:08 UTC #18 lore raw

PATCH 18/191 KVM: x86/mmu: Commit zap of remaining invalid pages when recovering lpages

From: Sean Christopherson <[email protected]>

commit e89505698c9f70125651060547da4ff5046124fc upstream.

Call kvm_mmu_commit_zap_page() after exiting the "prepare zap" loop in kvm_recover_nx_lpages() to finish zapping pages in the unlikely event that the loop exited due to lpage_disallowed_mmu_pages being empty. Because the recovery thread drops mmu_lock() when rescheduling, it's possible that lpage_disallowed_mmu_pages could be emptied by a different thread without to_zap reaching zero despite to_zap being derived from the number of disallowed lpages.

Fixes 1aa9b9572b105 ("kvm: x86: mmu: Recovery of shattered NX large pages")

Cc Junaid Shahid <[email protected]>

Cc [email protected]

Signed-off-by Sean Christopherson <[email protected]>

Message-Id: <[email protected]>

Signed-off-by Paolo Bonzini <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 arch/x86/kvm/mmu.c |    1 +
 1 file changed, 1 insertion(+)

arch/x86/kvm/mmu.c +1 -0

@@ -5846,6 +5846,7 @@ static void kvm_recover_nx_lpages(struct
 				cond_resched_lock(&kvm->mmu_lock);
 		}
 	}
+	kvm_mmu_commit_zap_page(kvm, &invalid_list);
 
 	spin_unlock(&kvm->mmu_lock);
 	srcu_read_unlock(&kvm->srcu, rcu_idx);

Greg Kroah-Hartman

author maintainer

2020-10-27 14:08 UTC #19 lore raw

PATCH 19/191 KVM: SVM: Initialize prev_ga_tag before use

From: Suravee Suthikulpanit <[email protected]>

commit f6426ab9c957e97418ac5b0466538792767b1738 upstream.

The function amd_ir_set_vcpu_affinity makes use of the parameter struct amd_iommu_pi_data.prev_ga_tag to determine if it should delete struct amd_iommu_pi_data from a list when not running in AVIC mode.

However, prev_ga_tag is initialized only when AVIC is enabled. The non-zero uninitialized value can cause unintended code path, which ends up making use of the struct vcpu_svm.ir_list and ir_list_lock without being initialized (since they are intended only for the AVIC case).

This triggers NULL pointer dereference bug in the function vm_ir_list_del with the following call trace:

    svm_update_pi_irte+0x3c2/0x550 [kvm_amd]
    ? proc_create_single_data+0x41/0x50
    kvm_arch_irq_bypass_add_producer+0x40/0x60 [kvm]
    __connect+0x5f/0xb0 [irqbypass]
    irq_bypass_register_producer+0xf8/0x120 [irqbypass]
    vfio_msi_set_vector_signal+0x1de/0x2d0 [vfio_pci]
    vfio_msi_set_block+0x77/0xe0 [vfio_pci]
    vfio_pci_set_msi_trigger+0x25c/0x2f0 [vfio_pci]
    vfio_pci_set_irqs_ioctl+0x88/0xb0 [vfio_pci]
    vfio_pci_ioctl+0x2ea/0xed0 [vfio_pci]
    ? alloc_file_pseudo+0xa5/0x100
    vfio_device_fops_unl_ioctl+0x26/0x30 [vfio]
    ? vfio_device_fops_unl_ioctl+0x26/0x30 [vfio]
    __x64_sys_ioctl+0x96/0xd0
    do_syscall_64+0x37/0x80
    entry_SYSCALL_64_after_hwframe+0x44/0xa9

Therefore, initialize prev_ga_tag to zero before use. This should be safe because ga_tag value 0 is invalid (see function avic_vm_init).

Fixes dfa20099e26e ("KVM: SVM: Refactor AVIC vcpu initialization into avic_init_vcpu()")

Signed-off-by Suravee Suthikulpanit <[email protected]>

Message-Id: <[email protected]>

Cc [email protected]

Signed-off-by Paolo Bonzini <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 arch/x86/kvm/svm.c |    1 +
 1 file changed, 1 insertion(+)

arch/x86/kvm/svm.c +1 -0

@@ -4862,6 +4862,7 @@ static int svm_update_pi_irte(struct kvm
 			 * - Tell IOMMU to use legacy mode for this interrupt.
 			 * - Retrieve ga_tag of prior interrupt remapping data.
 			 */
+			pi.prev_ga_tag = 0;
 			pi.is_guest_mode = false;
 			ret = irq_set_vcpu_affinity(host_irq, &pi);

Greg Kroah-Hartman

author maintainer

2020-10-27 14:08 UTC #20 lore raw

PATCH 20/191 ima: Dont ignore errors from crypto_shash_update()

From: Roberto Sassu <[email protected]>

commit 60386b854008adc951c470067f90a2d85b5d520f upstream.

Errors returned by crypto_shash_update() are not checked in ima_calc_boot_aggregate_tfm() and thus can be overwritten at the next iteration of the loop. This patch adds a check after calling crypto_shash_update() and returns immediately if the result is not zero.

Cc [email protected]

Fixes 3323eec921efd ("integrity: IMA as an integrity service provider")

Signed-off-by Roberto Sassu <[email protected]>

Signed-off-by Mimi Zohar <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 security/integrity/ima/ima_crypto.c |    2 ++
 1 file changed, 2 insertions(+)

security/integrity/ima/ima_crypto.c +2 -0

@@ -699,6 +699,8 @@ static int __init ima_calc_boot_aggregat
 		ima_pcrread(i, pcr_i);
 		/* now accumulate with current aggregate */
 		rc = crypto_shash_update(shash, pcr_i, TPM_DIGEST_SIZE);
+		if (rc != 0)
+			return rc;
 	}
 	if (!rc)
 		crypto_shash_final(shash, digest);

Greg Kroah-Hartman

author maintainer

2020-10-27 14:08 UTC #21 lore raw

PATCH 21/191 crypto: algif_aead - Do not set MAY_BACKLOG on the async path

From: Herbert Xu <[email protected]>

commit cbdad1f246dd98e6c9c32a6e5212337f542aa7e0 upstream.

The async path cannot use MAY_BACKLOG because it is not meant to block, which is what MAY_BACKLOG does. On the other hand, both the sync and async paths can make use of MAY_SLEEP.

Fixes 83094e5e9e49 ("crypto: af_alg - add async support to...")

Cc <[email protected]>

Signed-off-by Herbert Xu <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 crypto/algif_aead.c |    7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

crypto/algif_aead.c +4 -3

@@ -83,7 +83,7 @@ static int crypto_aead_copy_sgl(struct c
 	SKCIPHER_REQUEST_ON_STACK(skreq, null_tfm);
 
 	skcipher_request_set_tfm(skreq, null_tfm);
-	skcipher_request_set_callback(skreq, CRYPTO_TFM_REQ_MAY_BACKLOG,
+	skcipher_request_set_callback(skreq, CRYPTO_TFM_REQ_MAY_SLEEP,
 				      NULL, NULL);
 	skcipher_request_set_crypt(skreq, src, dst, len, NULL);

@@ -296,19 +296,20 @@ static int _aead_recvmsg(struct socket *
 		areq->outlen = outlen;
 
 		aead_request_set_callback(&areq->cra_u.aead_req,
-					  CRYPTO_TFM_REQ_MAY_BACKLOG,
+					  CRYPTO_TFM_REQ_MAY_SLEEP,
 					  af_alg_async_cb, areq);
 		err = ctx->enc ? crypto_aead_encrypt(&areq->cra_u.aead_req) :
 				 crypto_aead_decrypt(&areq->cra_u.aead_req);
 
 		/* AIO operation in progress */
-		if (err == -EINPROGRESS || err == -EBUSY)
+		if (err == -EINPROGRESS)
 			return -EIOCBQUEUED;
 
 		sock_put(sk);
 	} else {
 		/* Synchronous operation */
 		aead_request_set_callback(&areq->cra_u.aead_req,
+					  CRYPTO_TFM_REQ_MAY_SLEEP |
 					  CRYPTO_TFM_REQ_MAY_BACKLOG,
 					  af_alg_complete, &ctx->completion);
 		err = af_alg_wait_for_completion(ctx->enc ?

Greg Kroah-Hartman

author maintainer

2020-10-27 14:09 UTC #22 lore raw

PATCH 22/191 EDAC/i5100: Fix error handling order in i5100_init_one()

From: Dinghao Liu <[email protected]>

[ Upstream commit 857a3139bd8be4f702c030c8ca06f3fd69c1741a ]

When pci_get_device_func() fails, the driver doesn't need to execute pci_dev_put(). mci should still be freed, though, to prevent a memory leak. When pci_enable_device() fails, the error injection PCI device "einj" doesn't need to be disabled either.

[ bp: Massage commit message, rename label to "bail_mc_free". ]

Fixes 52608ba205461 ("i5100_edac: probe for device 19 function 0")

Signed-off-by Dinghao Liu <[email protected]>

Signed-off-by Borislav Petkov <[email protected]>

Link https://lkml.kernel.org/r/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/edac/i5100_edac.c | 11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)

drivers/edac/i5100_edac.c +5 -6

index b506eef6b146d..858ef4e15180b 100644
@@ -1072,16 +1072,15 @@ static int i5100_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 				    PCI_DEVICE_ID_INTEL_5100_19, 0);
 	if (!einj) {
 		ret = -ENODEV;
-		goto bail_einj;
+		goto bail_mc_free;
 	}
 
 	rc = pci_enable_device(einj);
 	if (rc < 0) {
 		ret = rc;
-		goto bail_disable_einj;
+		goto bail_einj;
 	}
 
-
 	mci->pdev = &pdev->dev;
 
 	priv = mci->pvt_info;

@@ -1147,14 +1146,14 @@ static int i5100_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 bail_scrub:
 	priv->scrub_enable = 0;
 	cancel_delayed_work_sync(&(priv->i5100_scrubbing));
-	edac_mc_free(mci);
-
-bail_disable_einj:
 	pci_disable_device(einj);
 
 bail_einj:
 	pci_dev_put(einj);
 
+bail_mc_free:
+	edac_mc_free(mci);
+
 bail_disable_ch1:
 	pci_disable_device(ch1mm);

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 14:09 UTC #23 lore raw

PATCH 23/191 x86/fpu: Allow multiple bits in clearcpuid= parameter

From: Arvind Sankar <[email protected]>

[ Upstream commit 0a4bb5e5507a585532cc413125b921c8546fc39f ]

Commit

0c2a3913d6f5 ("x86/fpu: Parse clearcpuid= as early XSAVE argument")

changed clearcpuid parsing from __setup() to cmdline_find_option(). While the __setup() function would have been called for each clearcpuid= parameter on the command line, cmdline_find_option() will only return the last one, so the change effectively made it impossible to disable more than one bit.

Allow a comma-separated list of bit numbers as the argument for clearcpuid to allow multiple bits to be disabled again. Log the bits being disabled for informational purposes.

Also fix the check on the return value of cmdline_find_option(). It returns -1 when the option is not found, so testing as a boolean is incorrect.

Fixes 0c2a3913d6f5 ("x86/fpu: Parse clearcpuid= as early XSAVE argument")

Signed-off-by Arvind Sankar <[email protected]>

Signed-off-by Borislav Petkov <[email protected]>

Link https://lkml.kernel.org/r/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 .../admin-guide/kernel-parameters.txt         |  2 +-
 arch/x86/kernel/fpu/init.c                    | 30 ++++++++++++++-----
 2 files changed, 23 insertions(+), 9 deletions(-)

Documentation/admin-guide/kernel-parameters.txt +1 -1

index dc96e7f10ebcd..0a59fcf934f43 100644
@@ -552,7 +552,7 @@
 			loops can be debugged more effectively on production
 			systems.
 
-	clearcpuid=BITNUM [X86]
+	clearcpuid=BITNUM[,BITNUM...] [X86]
 			Disable CPUID feature X for the kernel. See
 			arch/x86/include/asm/cpufeatures.h for the valid bit
 			numbers. Note the Linux specific bits are not necessarily

arch/x86/kernel/fpu/init.c +22 -8

index 6abd83572b016..9692ccc583bb3 100644
@@ -249,9 +249,9 @@ static void __init fpu__init_system_ctx_switch(void)
  */
 static void __init fpu__init_parse_early_param(void)
 {
-	char arg[32];
+	char arg[128];
 	char *argptr = arg;
-	int bit;
+	int arglen, res, bit;
 
 	if (cmdline_find_option_bool(boot_command_line, "no387"))
 		setup_clear_cpu_cap(X86_FEATURE_FPU);

@@ -271,12 +271,26 @@ static void __init fpu__init_parse_early_param(void)
 	if (cmdline_find_option_bool(boot_command_line, "noxsaves"))
 		setup_clear_cpu_cap(X86_FEATURE_XSAVES);
 
-	if (cmdline_find_option(boot_command_line, "clearcpuid", arg,
-				sizeof(arg)) &&
-	    get_option(&argptr, &bit) &&
-	    bit >= 0 &&
-	    bit < NCAPINTS * 32)
-		setup_clear_cpu_cap(bit);
+	arglen = cmdline_find_option(boot_command_line, "clearcpuid", arg, sizeof(arg));
+	if (arglen <= 0)
+		return;
+
+	pr_info("Clearing CPUID bits:");
+	do {
+		res = get_option(&argptr, &bit);
+		if (res == 0 || res == 3)
+			break;
+
+		/* If the argument was too long, the last bit may be cut off */
+		if (res == 1 && arglen >= sizeof(arg))
+			break;
+
+		if (bit >= 0 && bit < NCAPINTS * 32) {
+			pr_cont(" " X86_CAP_FMT, x86_cap_flag(bit));
+			setup_clear_cpu_cap(bit);
+		}
+	} while (res == 2);
+	pr_cont("\n");
 }
 
 /*

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 14:11 UTC #24 lore raw

PATCH 24/191 drivers/perf: xgene_pmu: Fix uninitialized resource struct

From: Mark Salter <[email protected]>

[ Upstream commit a76b8236edcf5b785d044b930f9e14ad02b4a484 ]

This splat was reported on newer Fedora kernels booting on certain X-gene based machines:

xgene-pmu APMC0D83:00: X-Gene PMU version 3

 Unable to handle kernel read from unreadable memory at virtual \
 address 0000000000004006
 ...
 Call trace:
  string+0x50/0x100
  vsnprintf+0x160/0x750
  devm_kvasprintf+0x5c/0xb4
  devm_kasprintf+0x54/0x60
  __devm_ioremap_resource+0xdc/0x1a0
  devm_ioremap_resource+0x14/0x20
  acpi_get_pmu_hw_inf.isra.0+0x84/0x15c
  acpi_pmu_dev_add+0xbc/0x21c
  acpi_ns_walk_namespace+0x16c/0x1e4
  acpi_walk_namespace+0xb4/0xfc
  xgene_pmu_probe_pmu_dev+0x7c/0xe0
  xgene_pmu_probe.part.0+0x2c0/0x310
  xgene_pmu_probe+0x54/0x64
  platform_drv_probe+0x60/0xb4
  really_probe+0xe8/0x4a0
  driver_probe_device+0xe4/0x100
  device_driver_attach+0xcc/0xd4
  __driver_attach+0xb0/0x17c
  bus_for_each_dev+0x6c/0xb0
  driver_attach+0x30/0x40
  bus_add_driver+0x154/0x250
  driver_register+0x84/0x140
  __platform_driver_register+0x54/0x60
  xgene_pmu_driver_init+0x28/0x34
  do_one_initcall+0x40/0x204
  do_initcalls+0x104/0x144
  kernel_init_freeable+0x198/0x210
  kernel_init+0x20/0x12c
  ret_from_fork+0x10/0x18
 Code: 91000400 110004e1 eb08009f 540000c0 (38646846)
 ---[ end trace f08c10566496a703 ]---

This is due to use of an uninitialized local resource struct in the xgene pmu driver. The thunderx2_pmu driver avoids this by using the resource list constructed by acpi_dev_get_resources() rather than using a callback from that function. The callback in the xgene driver didn't fully initialize the resource. So get rid of the callback and search the resource list as done by thunderx2.

Fixes 832c927d119b ("perf: xgene: Add APM X-Gene SoC Performance Monitoring Unit driver")

Signed-off-by Mark Salter <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Will Deacon <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/perf/xgene_pmu.c | 32 +++++++++++++++++---------------
 1 file changed, 17 insertions(+), 15 deletions(-)

drivers/perf/xgene_pmu.c +17 ~~-15~~

index 8b79c2f7931f1..806fb1f415c29 100644
@@ -1474,17 +1474,6 @@ static char *xgene_pmu_dev_name(struct device *dev, u32 type, int id)
 }
 
 #if defined(CONFIG_ACPI)
-static int acpi_pmu_dev_add_resource(struct acpi_resource *ares, void *data)
-{
-	struct resource *res = data;
-
-	if (ares->type == ACPI_RESOURCE_TYPE_FIXED_MEMORY32)
-		acpi_dev_resource_memory(ares, res);
-
-	/* Always tell the ACPI core to skip this resource */
-	return 1;
-}
-
 static struct
 xgene_pmu_dev_ctx *acpi_get_pmu_hw_inf(struct xgene_pmu *xgene_pmu,
 				       struct acpi_device *adev, u32 type)

@@ -1496,6 +1485,7 @@ xgene_pmu_dev_ctx *acpi_get_pmu_hw_inf(struct xgene_pmu *xgene_pmu,
 	struct hw_pmu_info *inf;
 	void __iomem *dev_csr;
 	struct resource res;
+	struct resource_entry *rentry;
 	int enable_bit;
 	int rc;

@@ -1504,11 +1494,23 @@ xgene_pmu_dev_ctx *acpi_get_pmu_hw_inf(struct xgene_pmu *xgene_pmu,
 		return NULL;
 
 	INIT_LIST_HEAD(&resource_list);
-	rc = acpi_dev_get_resources(adev, &resource_list,
-				    acpi_pmu_dev_add_resource, &res);
+	rc = acpi_dev_get_resources(adev, &resource_list, NULL, NULL);
+	if (rc <= 0) {
+		dev_err(dev, "PMU type %d: No resources found\n", type);
+		return NULL;
+	}
+
+	list_for_each_entry(rentry, &resource_list, node) {
+		if (resource_type(rentry->res) == IORESOURCE_MEM) {
+			res = *rentry->res;
+			rentry = NULL;
+			break;
+		}
+	}
 	acpi_dev_free_resource_list(&resource_list);
-	if (rc < 0) {
-		dev_err(dev, "PMU type %d: No resource address found\n", type);
+
+	if (rentry) {
+		dev_err(dev, "PMU type %d: No memory resource found\n", type);
 		return NULL;
 	}

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 14:09 UTC #25 lore raw

PATCH 25/191 crypto: algif_skcipher - EBUSY on aio should be an error

From: Herbert Xu <[email protected]>

[ Upstream commit 2a05b029c1ee045b886ebf9efef9985ca23450de ]

I removed the MAY_BACKLOG flag on the aio path a while ago but the error check still incorrectly interpreted EBUSY as success. This may cause the submitter to wait for a request that will never complete.

Fixes dad419970637 ("crypto: algif_skcipher - Do not set...")

Signed-off-by Herbert Xu <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 crypto/algif_skcipher.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

crypto/algif_skcipher.c +1 -1

index d9ec5dca86729..a9dc4eeddcd53 100644
@@ -133,7 +133,7 @@ static int _skcipher_recvmsg(struct socket *sock, struct msghdr *msg,
 			crypto_skcipher_decrypt(&areq->cra_u.skcipher_req);
 
 		/* AIO operation in progress */
-		if (err == -EINPROGRESS || err == -EBUSY)
+		if (err == -EINPROGRESS)
 			return -EIOCBQUEUED;
 
 		sock_put(sk);

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 14:09 UTC #26 lore raw

PATCH 26/191 crypto: mediatek - Fix wrong return value in mtk_desc_ring_alloc()

From: Tianjia Zhang <[email protected]>

[ Upstream commit 8cbde6c6a6d2b1599ff90f932304aab7e32fce89 ]

In case of memory allocation failure, a negative error code should be returned.

Fixes 785e5c616c849 ("crypto: mediatek - Add crypto driver support for some MediaTek chips")

Cc Ryder Lee <[email protected]>

Signed-off-by Tianjia Zhang <[email protected]>

Signed-off-by Herbert Xu <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/crypto/mediatek/mtk-platform.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

drivers/crypto/mediatek/mtk-platform.c +2 -2

index b182e941b0cd8..c58e708d30395 100644
@@ -445,7 +445,7 @@ static void mtk_desc_dma_free(struct mtk_cryp *cryp)
 static int mtk_desc_ring_alloc(struct mtk_cryp *cryp)
 {
 	struct mtk_ring **ring = cryp->ring;
-	int i, err = ENOMEM;
+	int i;
 
 	for (i = 0; i < MTK_RING_MAX; i++) {
 		ring[i] = kzalloc(sizeof(**ring), GFP_KERNEL);

@@ -479,7 +479,7 @@ static int mtk_desc_ring_alloc(struct mtk_cryp *cryp)
 				  ring[i]->cmd_base, ring[i]->cmd_dma);
 		kfree(ring[i]);
 	}
-	return err;
+	return -ENOMEM;
 }
 
 static int mtk_crypto_probe(struct platform_device *pdev)

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 14:11 UTC #27 lore raw

PATCH 27/191 crypto: ixp4xx - Fix the size used in a dma_free_coherent() call

From: Christophe JAILLET <[email protected]>

[ Upstream commit f7ade9aaf66bd5599690acf0597df2c0f6cd825a ]

Update the size used in 'dma_free_coherent()' in order to match the one used in the corresponding 'dma_alloc_coherent()', in 'setup_crypt_desc()'.

Fixes 81bef0150074 ("crypto: ixp4xx - Hardware crypto support for IXP4xx CPUs")

Signed-off-by Christophe JAILLET <[email protected]>

Signed-off-by Herbert Xu <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/crypto/ixp4xx_crypto.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

drivers/crypto/ixp4xx_crypto.c +1 -1

index dadc4a808df5a..4b6773c345ab7 100644
@@ -531,7 +531,7 @@ static void release_ixp_crypto(struct device *dev)
 
 	if (crypt_virt) {
 		dma_free_coherent(dev,
-			NPE_QLEN_TOTAL * sizeof( struct crypt_ctl),
+			NPE_QLEN * sizeof(struct crypt_ctl),
 			crypt_virt, crypt_phys);
 	}
 	return;

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 14:09 UTC #28 lore raw

PATCH 28/191 media: tuner-simple: fix regression in simple_set_radio_freq

From: Tom Rix <[email protected]>

[ Upstream commit 505bfc2a142f12ce7bc7a878b44abc3496f2e747 ]

clang static analysis reports this problem

tuner-simple.c:714:13: warning: Assigned value is
garbage or undefined

        buffer[1] = buffer[3];
                  ^ ~~~~~~~~~

In simple_set_radio_freq buffer[3] used to be done in-function with a switch of tuner type, now done by a call to simple_radio_bandswitch which has this case

	case TUNER_TENA_9533_DI:
	case TUNER_YMEC_TVF_5533MF:
		tuner_dbg("This tuner doesn't ...
		return 0;

which does not set buffer[3]. In the old logic, this case would have returned 0 from simple_set_radio_freq.

Recover this old behavior by returning an error for this codition. Since the old simple_set_radio_freq behavior returned a 0, do the same.

Fixes c7a9f3aa1e1b ("V4L/DVB (7129): tuner-simple: move device-specific code into three separate functions")

Signed-off-by Tom Rix <[email protected]>

Signed-off-by Mauro Carvalho Chehab <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/media/tuners/tuner-simple.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

drivers/media/tuners/tuner-simple.c +3 -2

index cf44d3657f555..9b2501046bd14 100644
@@ -499,7 +499,7 @@ static int simple_radio_bandswitch(struct dvb_frontend *fe, u8 *buffer)
 	case TUNER_TENA_9533_DI:
 	case TUNER_YMEC_TVF_5533MF:
 		tuner_dbg("This tuner doesn't have FM. Most cards have a TEA5767 for FM\n");
-		return 0;
+		return -EINVAL;
 	case TUNER_PHILIPS_FM1216ME_MK3:
 	case TUNER_PHILIPS_FM1236_MK3:
 	case TUNER_PHILIPS_FMD1216ME_MK3:

@@ -700,7 +700,8 @@ static int simple_set_radio_freq(struct dvb_frontend *fe,
 		    TUNER_RATIO_SELECT_50; /* 50 kHz step */
 
 	/* Bandswitch byte */
-	simple_radio_bandswitch(fe, &buffer[0]);
+	if (simple_radio_bandswitch(fe, &buffer[0]))
+		return 0;
 
 	/* Convert from 1/16 kHz V4L steps to 1/20 MHz (=50 kHz) PLL steps
 	   freq * (1 Mhz / 16000 V4L steps) * (20 PLL steps / 1 MHz) =

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 14:09 UTC #29 lore raw

PATCH 29/191 media: Revert "media: exynos4-is: Add missed check for pinctrl_lookup_state()"

From: Sylwester Nawrocki <[email protected]>

[ Upstream commit 00d21f325d58567d81d9172096692d0a9ea7f725 ]

The "idle" pinctrl state is optional as documented in the DT binding. The change introduced by the commit being reverted makes that pinctrl state mandatory and breaks initialization of the whole media driver, since the "idle" state is not specified in any mainline dts.

This reverts commit 18ffec750578 ("media: exynos4-is: Add missed check for pinctrl_lookup_state()") to fix the regression.

Fixes 18ffec750578 ("media: exynos4-is: Add missed check for pinctrl_lookup_state()")

Signed-off-by Sylwester Nawrocki <[email protected]>

Signed-off-by Mauro Carvalho Chehab <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/media/platform/exynos4-is/media-dev.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

drivers/media/platform/exynos4-is/media-dev.c +1 -3

index f772c9b92d9ba..d313f9078e714 100644
@@ -1256,11 +1256,9 @@ static int fimc_md_get_pinctrl(struct fimc_md *fmd)
 	if (IS_ERR(pctl->state_default))
 		return PTR_ERR(pctl->state_default);
 
+	/* PINCTRL_STATE_IDLE is optional */
 	pctl->state_idle = pinctrl_lookup_state(pctl->pinctrl,
 					PINCTRL_STATE_IDLE);
-	if (IS_ERR(pctl->state_idle))
-		return PTR_ERR(pctl->state_idle);
-
 	return 0;
 }

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 14:09 UTC #30 lore raw

PATCH 30/191 media: m5mols: Check function pointer in m5mols_sensor_power

From: Tom Rix <[email protected]>

[ Upstream commit 52438c4463ac904d14bf3496765e67750766f3a6 ]

clang static analysis reports this error

m5mols_core.c:767:4: warning: Called function pointer
is null (null dereference) [core.CallAndMessage]

    info->set_power(&client->dev, 0);
    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

In other places, the set_power ptr is checked.
So add a check.

Fixes bc125106f8af ("[media] Add support for M-5MOLS 8 Mega Pixel camera ISP")

Signed-off-by Tom Rix <[email protected]>

Signed-off-by Sakari Ailus <[email protected]>

Signed-off-by Mauro Carvalho Chehab <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/media/i2c/m5mols/m5mols_core.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

drivers/media/i2c/m5mols/m5mols_core.c +2 -1

index 463534d44756e..9015ebc843b4e 100644
@@ -755,7 +755,8 @@ static int m5mols_sensor_power(struct m5mols_info *info, bool enable)
 
 		ret = regulator_bulk_enable(ARRAY_SIZE(supplies), supplies);
 		if (ret) {
-			info->set_power(&client->dev, 0);
+			if (info->set_power)
+				info->set_power(&client->dev, 0);
 			return ret;
 		}

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 14:09 UTC #31 lore raw

PATCH 31/191 media: uvcvideo: Set media controller entity functions

From: Laurent Pinchart <[email protected]>

[ Upstream commit d6834b4b58d110814aaf3469e7fd87d34ae5ae81 ]

The media controller core prints a warning when an entity is registered without a function being set. This affects the uvcvideo driver, as the warning was added without first addressing the issue in existing drivers. The problem is harmless, but unnecessarily worries users. Fix it by mapping UVC entity types to MC entity functions as accurately as possible using the existing functions.

Fixes b50bde4e476d ("[media] v4l2-subdev: use MEDIA_ENT_T_UNKNOWN for new subdevs")

Signed-off-by Laurent Pinchart <[email protected]>

Reviewed-by Kieran Bingham <[email protected]>

Signed-off-by Mauro Carvalho Chehab <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/media/usb/uvc/uvc_entity.c | 35 ++++++++++++++++++++++++++++++
 1 file changed, 35 insertions(+)

drivers/media/usb/uvc/uvc_entity.c +35 -0

index 554063c07d7a2..f2457953f27c6 100644
@@ -78,10 +78,45 @@ static int uvc_mc_init_entity(struct uvc_video_chain *chain,
 	int ret;
 
 	if (UVC_ENTITY_TYPE(entity) != UVC_TT_STREAMING) {
+		u32 function;
+
 		v4l2_subdev_init(&entity->subdev, &uvc_subdev_ops);
 		strlcpy(entity->subdev.name, entity->name,
 			sizeof(entity->subdev.name));
 
+		switch (UVC_ENTITY_TYPE(entity)) {
+		case UVC_VC_SELECTOR_UNIT:
+			function = MEDIA_ENT_F_VID_MUX;
+			break;
+		case UVC_VC_PROCESSING_UNIT:
+		case UVC_VC_EXTENSION_UNIT:
+			/* For lack of a better option. */
+			function = MEDIA_ENT_F_PROC_VIDEO_PIXEL_FORMATTER;
+			break;
+		case UVC_COMPOSITE_CONNECTOR:
+		case UVC_COMPONENT_CONNECTOR:
+			function = MEDIA_ENT_F_CONN_COMPOSITE;
+			break;
+		case UVC_SVIDEO_CONNECTOR:
+			function = MEDIA_ENT_F_CONN_SVIDEO;
+			break;
+		case UVC_ITT_CAMERA:
+			function = MEDIA_ENT_F_CAM_SENSOR;
+			break;
+		case UVC_TT_VENDOR_SPECIFIC:
+		case UVC_ITT_VENDOR_SPECIFIC:
+		case UVC_ITT_MEDIA_TRANSPORT_INPUT:
+		case UVC_OTT_VENDOR_SPECIFIC:
+		case UVC_OTT_DISPLAY:
+		case UVC_OTT_MEDIA_TRANSPORT_OUTPUT:
+		case UVC_EXTERNAL_VENDOR_SPECIFIC:
+		default:
+			function = MEDIA_ENT_F_V4L2_SUBDEV_UNKNOWN;
+			break;
+		}
+
+		entity->subdev.entity.function = function;
+
 		ret = media_entity_pads_init(&entity->subdev.entity,
 					entity->num_pads, entity->pads);

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 14:11 UTC #32 lore raw

PATCH 32/191 media: omap3isp: Fix memleak in isp_probe

From: Dinghao Liu <[email protected]>

[ Upstream commit d8fc21c17099635e8ebd986d042be65a6c6b5bd0 ]

When devm_ioremap_resource() fails, isp should be
freed just like other error paths in isp_probe.

Fixes 8644cdf972dd6 ("[media] omap3isp: Replace many MMIO regions by two")

Signed-off-by Dinghao Liu <[email protected]>

Signed-off-by Sakari Ailus <[email protected]>

Signed-off-by Mauro Carvalho Chehab <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/media/platform/omap3isp/isp.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

drivers/media/platform/omap3isp/isp.c +4 -2

index b34b6a604f92f..c46402f3e88c1 100644
@@ -2304,8 +2304,10 @@ static int isp_probe(struct platform_device *pdev)
 		mem = platform_get_resource(pdev, IORESOURCE_MEM, i);
 		isp->mmio_base[map_idx] =
 			devm_ioremap_resource(isp->dev, mem);
-		if (IS_ERR(isp->mmio_base[map_idx]))
-			return PTR_ERR(isp->mmio_base[map_idx]);
+		if (IS_ERR(isp->mmio_base[map_idx])) {
+			ret = PTR_ERR(isp->mmio_base[map_idx]);
+			goto error;
+		}
 	}
 
 	ret = isp_get_clocks(isp);

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 18:18 UTC #33 lore raw

PATCH 33/191 crypto: omap-sham - fix digcnt register handling with export/import

From: Tero Kristo <[email protected]>

[ Upstream commit 3faf757bad75f3fc1b2736f0431e295a073a7423 ]

Running export/import for hashes in peculiar order (mostly done by openssl) can mess up the internal book keeping of the OMAP SHA core. Fix by forcibly writing the correct DIGCNT back to hardware. This issue was noticed while transitioning to openssl 1.1 support.

Fixes 0d373d603202 ("crypto: omap-sham - Add OMAP4/AM33XX SHAM Support")

Signed-off-by Tero Kristo <[email protected]>

Signed-off-by Herbert Xu <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/crypto/omap-sham.c | 3 +++
 1 file changed, 3 insertions(+)

drivers/crypto/omap-sham.c +3 -0

index 4e38b87c32284..e34e9561e77d6 100644
@@ -455,6 +455,9 @@ static void omap_sham_write_ctrl_omap4(struct omap_sham_dev *dd, size_t length,
 	struct omap_sham_reqctx *ctx = ahash_request_ctx(dd->req);
 	u32 val, mask;
 
+	if (likely(ctx->digcnt))
+		omap_sham_write(dd, SHA_REG_DIGCNT(dd), ctx->digcnt);
+
 	/*
 	 * Setting ALGO_CONST only for the first iteration and
 	 * CLOSE_HASH only for the last one. Note that flags mode bits

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 14:11 UTC #34 lore raw

PATCH 34/191 cypto: mediatek - fix leaks in mtk_desc_ring_alloc

From: Xiaoliang Pang <[email protected]>

[ Upstream commit 228d284aac61283cde508a925d666f854b57af63 ]

In the init loop, if an error occurs in function 'dma_alloc_coherent', then goto the err_cleanup section, after run i--,
in the array ring, the struct mtk_ring with index i will not be released, causing memory leaks

Fixes 785e5c616c849 ("crypto: mediatek - Add crypto driver support for some MediaTek chips")

Cc Ryder Lee <[email protected]>

Signed-off-by Xiaoliang Pang <[email protected]>

Signed-off-by Herbert Xu <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/crypto/mediatek/mtk-platform.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

drivers/crypto/mediatek/mtk-platform.c +2 -2

index c58e708d30395..b2b1e90a3079d 100644
@@ -472,13 +472,13 @@ static int mtk_desc_ring_alloc(struct mtk_cryp *cryp)
 	return 0;
 
 err_cleanup:
-	for (; i--; ) {
+	do {
 		dma_free_coherent(cryp->dev, MTK_DESC_RING_SZ,
 				  ring[i]->res_base, ring[i]->res_dma);
 		dma_free_coherent(cryp->dev, MTK_DESC_RING_SZ,
 				  ring[i]->cmd_base, ring[i]->cmd_dma);
 		kfree(ring[i]);
-	}
+	} while (i--);
 	return -ENOMEM;
 }

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 14:12 UTC #35 lore raw

PATCH 35/191 media: mx2_emmaprp: Fix memleak in emmaprp_probe

From: Dinghao Liu <[email protected]>

[ Upstream commit 21d387b8d372f859d9e87fdcc7c3b4a432737f4d ]

When platform_get_irq() fails, we should release
vfd and unregister pcdev->v4l2_dev just like the
subsequent error paths.

Fixes d4e192cc44914 ("media: mx2_emmaprp: Check for platform_get_irq() error")

Signed-off-by Dinghao Liu <[email protected]>

Reviewed-by Fabio Estevam <[email protected]>

Signed-off-by Mauro Carvalho Chehab <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/media/platform/mx2_emmaprp.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

drivers/media/platform/mx2_emmaprp.c +5 -2

index 951f2fd415b0d..163e825bf1aac 100644
@@ -942,8 +942,11 @@ static int emmaprp_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, pcdev);
 
 	irq = platform_get_irq(pdev, 0);
-	if (irq < 0)
-		return irq;
+	if (irq < 0) {
+		ret = irq;
+		goto rel_vdev;
+	}
+
 	ret = devm_request_irq(&pdev->dev, irq, emmaprp_irq, 0,
 			       dev_name(&pdev->dev), pcdev);
 	if (ret)

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 14:15 UTC #36 lore raw

PATCH 36/191 media: tc358743: initialize variable

From: Tom Rix <[email protected]>

[ Upstream commit 274cf92d5dff5c2fec1a518078542ffe70d07646 ]

clang static analysis flags this error

tc358743.c:1468:9: warning: Branch condition evaluates
to a garbage value

        return handled ? IRQ_HANDLED : IRQ_NONE;
               ^~~~~~~

handled should be initialized to false.

Fixes d747b806abf4 ("[media] tc358743: add direct interrupt handling")

Signed-off-by Tom Rix <[email protected]>

Signed-off-by Mauro Carvalho Chehab <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/media/i2c/tc358743.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

drivers/media/i2c/tc358743.c +1 -1

index c9647e24a4a3a..f74c4f6814ebb 100644
@@ -1318,7 +1318,7 @@ static int tc358743_isr(struct v4l2_subdev *sd, u32 status, bool *handled)
 static irqreturn_t tc358743_irq_handler(int irq, void *dev_id)
 {
 	struct tc358743_state *state = dev_id;
-	bool handled;
+	bool handled = false;
 
 	tc358743_isr(&state->sd, 0, &handled);

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 18:18 UTC #37 lore raw

PATCH 37/191 media: platform: fcp: Fix a reference count leak.

From: Qiushi Wu <[email protected]>

[ Upstream commit 63e36a381d92a9cded97e90d481ee22566557dd1 ]

Fixes 6eaafbdb668b ("[media] v4l: rcar-fcp: Keep the coding style consistent")

Signed-off-by Qiushi Wu <[email protected]>

Signed-off-by Mauro Carvalho Chehab <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/media/platform/rcar-fcp.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

drivers/media/platform/rcar-fcp.c +3 -1

index 0047d144c9326..19502a1860cf5 100644
@@ -106,8 +106,10 @@ int rcar_fcp_enable(struct rcar_fcp_device *fcp)
 		return 0;
 
 	ret = pm_runtime_get_sync(fcp->dev);
-	if (ret < 0)
+	if (ret < 0) {
+		pm_runtime_put_noidle(fcp->dev);
 		return ret;
+	}
 
 	return 0;
 }

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 18:18 UTC #38 lore raw

PATCH 38/191 media: s5p-mfc: Fix a reference count leak

From: Qiushi Wu <[email protected]>

[ Upstream commit 78741ce98c2e36188e2343434406b0e0bc50b0e7 ]

Fixes c5086f130a77 ("[media] s5p-mfc: Use clock gating only on MFC v5 hardware")

Signed-off-by Qiushi Wu <[email protected]>

Signed-off-by Mauro Carvalho Chehab <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/media/platform/s5p-mfc/s5p_mfc_pm.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

drivers/media/platform/s5p-mfc/s5p_mfc_pm.c +3 -1

index 5e080f32b0e82..95abf2bd7ebae 100644
@@ -83,8 +83,10 @@ int s5p_mfc_power_on(void)
 	int i, ret = 0;
 
 	ret = pm_runtime_get_sync(pm->device);
-	if (ret < 0)
+	if (ret < 0) {
+		pm_runtime_put_noidle(pm->device);
 		return ret;
+	}
 
 	/* clock control */
 	for (i = 0; i < pm->num_clocks; i++) {

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 14:15 UTC #39 lore raw

PATCH 39/191 media: ti-vpe: Fix a missing check and reference count leak

From: Qiushi Wu <[email protected]>

[ Upstream commit 7dae2aaaf432767ca7aa11fa84643a7c2600dbdd ]

pm_runtime_get_sync() increments the runtime PM usage counter even when it returns an error code, causing incorrect ref count if pm_runtime_put_noidle() is not called in error handling paths. And also, when the call of function vpe_runtime_get() failed, we won't call vpe_runtime_put().
Thus call pm_runtime_put_noidle() if pm_runtime_get_sync() fails inside vpe_runtime_get().

Fixes 4571912743ac ("[media] v4l: ti-vpe: Add VPE mem to mem driver")

Signed-off-by Qiushi Wu <[email protected]>

Signed-off-by Mauro Carvalho Chehab <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/media/platform/ti-vpe/vpe.c | 2 ++
 1 file changed, 2 insertions(+)

drivers/media/platform/ti-vpe/vpe.c +2 -0

index 2e8970c7e22da..bbd8bb611915c 100644
@@ -2470,6 +2470,8 @@ static int vpe_runtime_get(struct platform_device *pdev)
 
 	r = pm_runtime_get_sync(&pdev->dev);
 	WARN_ON(r < 0);
+	if (r)
+		pm_runtime_put_noidle(&pdev->dev);
 	return r < 0 ? r : 0;
 }

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 14:12 UTC #40 lore raw

PATCH 40/191 regulator: resolve supply after creating regulator

Link https://lore.kernel.org/r/ba09e0a8617ffeeb25cb4affffe6f3149319cef8.1601155770.git.mirq-linux@rere.qmqm.pl open here

From: Michał Mirosław <[email protected]>

[ Upstream commit aea6cb99703e17019e025aa71643b4d3e0a24413 ]

When creating a new regulator its supply cannot create the sysfs link because the device is not yet published. Remove early supply resolving since it will be done later anyway. This makes the following error disappear and the symlinks get created instead.

DCDC_REG1: supplied by VSYS
VSYS: could not add device link regulator.3 err -2

Note: It doesn't fix the problem for bypassed regulators, though.

Fixes 45389c47526d ("regulator: core: Add early supply resolution for regulators")

Signed-off-by Michał Mirosław <[email protected]>

Signed-off-by Mark Brown <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/regulator/core.c | 21 +++++++++++++--------
 1 file changed, 13 insertions(+), 8 deletions(-)

drivers/regulator/core.c +13 -8

index bd6991a99593d..a3c265177855d 100644
@@ -4090,15 +4090,20 @@ regulator_register(const struct regulator_desc *regulator_desc,
 	else if (regulator_desc->supply_name)
 		rdev->supply_name = regulator_desc->supply_name;
 
-	/*
-	 * Attempt to resolve the regulator supply, if specified,
-	 * but don't return an error if we fail because we will try
-	 * to resolve it again later as more regulators are added.
-	 */
-	if (regulator_resolve_supply(rdev))
-		rdev_dbg(rdev, "unable to resolve supply\n");
-
 	ret = set_machine_constraints(rdev, constraints);
+	if (ret == -EPROBE_DEFER) {
+		/* Regulator might be in bypass mode and so needs its supply
+		 * to set the constraints */
+		/* FIXME: this currently triggers a chicken-and-egg problem
+		 * when creating -SUPPLY symlink in sysfs to a regulator
+		 * that is just being created */
+		ret = regulator_resolve_supply(rdev);
+		if (!ret)
+			ret = set_machine_constraints(rdev, constraints);
+		else
+			rdev_dbg(rdev, "unable to resolve supply early: %pe\n",
+				 ERR_PTR(ret));
+	}
 	if (ret < 0)
 		goto wash;

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 18:18 UTC #41 lore raw

PATCH 41/191 ath10k: provide survey info as accumulated data

From: Venkateswara Naralasetty <[email protected]>

[ Upstream commit 720e5c03e5cb26d33d97f55192b791bb48478aa5 ]

It is expected that the returned counters by .get_survey are monotonic increasing. But the data from ath10k gets reset to zero regularly. Channel active/busy time are then showing incorrect values (less than previous or sometimes zero) for the currently active channel during successive survey dump commands.

example:

  $ iw dev wlan0 survey dump
  Survey data from wlan0
  	frequency:                      5180 MHz [in use]
  	channel active time:            54995 ms
  	channel busy time:              432 ms
  	channel receive time:           0 ms
  	channel transmit time:          59 ms
  ...

  $ iw dev wlan0 survey dump
  Survey data from wlan0
  	frequency:                      5180 MHz [in use]
  	channel active time:            32592 ms
  	channel busy time:              254 ms
  	channel receive time:           0 ms
  	channel transmit time:          0 ms
  ...

The correct way to handle this is to use the non-clearing WMI_BSS_SURVEY_REQ_TYPE_READ wmi_bss_survey_req_type. The firmware will then accumulate the survey data and handle wrap arounds.

Tested-on: QCA9984 hw1.0 10.4-3.5.3-00057
Tested-on: QCA988X hw2.0 10.2.4-1.0-00047
Tested-on: QCA9888 hw2.0 10.4-3.9.0.2-00024
Tested-on: QCA4019 hw1.0 10.4-3.6-00140

Fixes fa7937e3d5c2 ("ath10k: update bss channel survey information")

Signed-off-by Venkateswara Naralasetty <[email protected]>

Tested-by Markus Theil <[email protected]>

Tested-by John Deere <[email protected]>

[[email protected]: adjust commit message]

Signed-off-by Sven Eckelmann <[email protected]>

Signed-off-by Kalle Valo <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/net/wireless/ath/ath10k/mac.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

drivers/net/wireless/ath/ath10k/mac.c +1 -1

index ea47ad4b2343b..be4420ff52b8a 100644
@@ -6718,7 +6718,7 @@ ath10k_mac_update_bss_chan_survey(struct ath10k *ar,
 				  struct ieee80211_channel *channel)
 {
 	int ret;
-	enum wmi_bss_survey_req_type type = WMI_BSS_SURVEY_REQ_TYPE_READ_CLEAR;
+	enum wmi_bss_survey_req_type type = WMI_BSS_SURVEY_REQ_TYPE_READ;
 
 	lockdep_assert_held(&ar->conf_mutex);

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 18:18 UTC #42 lore raw

PATCH 42/191 Bluetooth: hci_uart: Cancel init work before unregistering

From: Samuel Holland <[email protected]>

[ Upstream commit 3b799254cf6f481460719023d7a18f46651e5e7f ]

If hci_uart_tty_close() or hci_uart_unregister_device() is called while hu->init_ready is scheduled, hci_register_dev() could be called after the hci_uart is torn down. Avoid this by ensuring the work is complete or canceled before checking the HCI_UART_REGISTERED flag.

Fixes 9f2aee848fe6 ("Bluetooth: Add delayed init sequence support for UART controllers")

Signed-off-by Samuel Holland <[email protected]>

Signed-off-by Marcel Holtmann <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/bluetooth/hci_ldisc.c  | 1 +
 drivers/bluetooth/hci_serdev.c | 2 ++
 2 files changed, 3 insertions(+)

drivers/bluetooth/hci_ldisc.c +1 -0

index 43221def1d29f..f19606019eb01 100644
@@ -541,6 +541,7 @@ static void hci_uart_tty_close(struct tty_struct *tty)
 		clear_bit(HCI_UART_PROTO_READY, &hu->flags);
 		percpu_up_write(&hu->proto_lock);
 
+		cancel_work_sync(&hu->init_ready);
 		cancel_work_sync(&hu->write_work);
 
 		if (hdev) {

drivers/bluetooth/hci_serdev.c +2 -0

index 72cf2d97b682c..196b046658ff4 100644
@@ -361,6 +361,8 @@ void hci_uart_unregister_device(struct hci_uart *hu)
 	struct hci_dev *hdev = hu->hdev;
 
 	clear_bit(HCI_UART_PROTO_READY, &hu->flags);
+
+	cancel_work_sync(&hu->init_ready);
 	if (test_bit(HCI_UART_REGISTERED, &hu->flags))
 		hci_unregister_dev(hdev);
 	hci_free_dev(hdev);

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 14:11 UTC #43 lore raw

PATCH 43/191 ath6kl: prevent potential array overflow in ath6kl_add_new_sta()

From: Dan Carpenter <[email protected]>

[ Upstream commit 54f9ab7b870934b70e5a21786d951fbcf663970f ]

The value for "aid" comes from skb->data so Smatch marks it as untrusted. If it's invalid then it can result in an out of bounds array access in ath6kl_add_new_sta().

Fixes 572e27c00c9d ("ath6kl: Fix AP mode connect event parsing and TIM updates")

Link https://lore.kernel.org/r/20200813141315.GB457408@mwanda open here

Signed-off-by Kalle Valo <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/net/wireless/ath/ath6kl/main.c | 3 +++
 1 file changed, 3 insertions(+)

drivers/net/wireless/ath/ath6kl/main.c +3 -0

index b90c77ef792ef..1c542cf0fd058 100644
@@ -430,6 +430,9 @@ void ath6kl_connect_ap_mode_sta(struct ath6kl_vif *vif, u16 aid, u8 *mac_addr,
 
 	ath6kl_dbg(ATH6KL_DBG_TRC, "new station %pM aid=%d\n", mac_addr, aid);
 
+	if (aid < 1 || aid > AP_MAX_NUM_STA)
+		return;
+
 	if (assoc_req_len > sizeof(struct ieee80211_hdr_3addr)) {
 		struct ieee80211_mgmt *mgmt =
 			(struct ieee80211_mgmt *) assoc_info;

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 18:14 UTC #44 lore raw

PATCH 44/191 ath9k: Fix potential out of bounds in ath9k_htc_txcompletion_cb()

From: Dan Carpenter <[email protected]>

[ Upstream commit 2705cd7558e718a7240c64eb0afb2edad5f8c190 ]

The value of "htc_hdr->endpoint_id" comes from skb->data so Smatch marks it as untrusted so we have to check it before using it as an array offset.

This is similar to a bug that syzkaller found in commit e4ff08a4d727 ("ath9k: Fix use-after-free Write in ath9k_htc_rx_msg") so it is probably a real issue.

Fixes fb9987d0f748 ("ath9k_htc: Support for AR9271 chipset.")

Link https://lore.kernel.org/r/20200813141253.GA457408@mwanda open here

Signed-off-by Kalle Valo <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/net/wireless/ath/ath9k/htc_hst.c | 2 ++
 1 file changed, 2 insertions(+)

drivers/net/wireless/ath/ath9k/htc_hst.c +2 -0

index f705f0e1cb5be..05fca38b38ed4 100644
@@ -342,6 +342,8 @@ void ath9k_htc_txcompletion_cb(struct htc_target *htc_handle,
 
 	if (skb) {
 		htc_hdr = (struct htc_frame_hdr *) skb->data;
+		if (htc_hdr->endpoint_id >= ARRAY_SIZE(htc_handle->endpoint))
+			goto ret;
 		endpoint = &htc_handle->endpoint[htc_hdr->endpoint_id];
 		skb_pull(skb, sizeof(struct htc_frame_hdr));

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 18:16 UTC #45 lore raw

PATCH 45/191 wcn36xx: Fix reported 802.11n rx_highest rate wcn3660/wcn3680

From: Bryan O'Donoghue <[email protected]>

[ Upstream commit 3b9fb6791e7113679b1eb472e6ce1659e80f5797 ]

Qualcomm's document "80-WL007-1 Rev. J" states that the highest rx rate for the WCN3660 and WCN3680 on MCS 7 is 150 Mbps not the 72 Mbps stated here.

This patch fixes the data-rate declared in the 5GHz table.

Fixes 8e84c2582169 ("wcn36xx: mac80211 driver for Qualcomm WCN3660/WCN3680

hardware")

Signed-off-by Bryan O'Donoghue <[email protected]>

Signed-off-by Kalle Valo <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/net/wireless/ath/wcn36xx/main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

drivers/net/wireless/ath/wcn36xx/main.c +1 -1

index 688152bcfc15c..2450f5f7f79f3 100644
@@ -162,7 +162,7 @@ static struct ieee80211_supported_band wcn_band_5ghz = {
 		.ampdu_density = IEEE80211_HT_MPDU_DENSITY_16,
 		.mcs = {
 			.rx_mask = { 0xff, 0, 0, 0, 0, 0, 0, 0, 0, 0, },
-			.rx_highest = cpu_to_le16(72),
+			.rx_highest = cpu_to_le16(150),
 			.tx_params = IEEE80211_HT_MCS_TX_DEFINED,
 		}
 	}

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 14:11 UTC #46 lore raw

PATCH 46/191 ASoC: qcom: lpass-platform: fix memory leak

From: Rohit kumar <[email protected]>

[ Upstream commit 5fd188215d4eb52703600d8986b22311099a5940 ]

lpass_pcm_data is never freed. Free it in close
ops to avoid memory leak.

Fixes 022d00ee0b55 ("ASoC: lpass-platform: Fix broken pcm data usage")

Signed-off-by Rohit kumar <[email protected]>

Reviewed-by Srinivas Kandagatla <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Mark Brown <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 sound/soc/qcom/lpass-platform.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

sound/soc/qcom/lpass-platform.c +2 -1

index e1945e1772cda..b8f8cb906d805 100644
@@ -67,7 +67,7 @@ static int lpass_platform_pcmops_open(struct snd_pcm_substream *substream)
 	int ret, dma_ch, dir = substream->stream;
 	struct lpass_pcm_data *data;
 
-	data = devm_kzalloc(soc_runtime->dev, sizeof(*data), GFP_KERNEL);
+	data = kzalloc(sizeof(*data), GFP_KERNEL);
 	if (!data)
 		return -ENOMEM;

@@ -127,6 +127,7 @@ static int lpass_platform_pcmops_close(struct snd_pcm_substream *substream)
 	if (v->free_dma_channel)
 		v->free_dma_channel(drvdata, data->dma_ch);
 
+	kfree(data);
 	return 0;
 }

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 14:11 UTC #47 lore raw

PATCH 47/191 ASoC: qcom: lpass-cpu: fix concurrency issue

From: Rohit kumar <[email protected]>

[ Upstream commit 753a6e17942f6f425ca622e1610625998312ad89 ]

i2sctl register value is set to 0 during hw_free(). This impacts any ongoing concurrent session on the same i2s port. As trigger() stop already resets enable bit to 0, there is no need of explicit hw_free. Removing it to fix the issue.

Fixes 80beab8e1d86 ("ASoC: qcom: Add LPASS CPU DAI driver")

Signed-off-by Rohit kumar <[email protected]>

Reviewed-by Srinivas Kandagatla <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Mark Brown <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 sound/soc/qcom/lpass-cpu.c | 16 ----------------
 1 file changed, 16 deletions(-)

sound/soc/qcom/lpass-cpu.c +0 ~~-16~~

index 292b103abada9..475579a9830a3 100644
@@ -182,21 +182,6 @@ static int lpass_cpu_daiops_hw_params(struct snd_pcm_substream *substream,
 	return 0;
 }
 
-static int lpass_cpu_daiops_hw_free(struct snd_pcm_substream *substream,
-		struct snd_soc_dai *dai)
-{
-	struct lpass_data *drvdata = snd_soc_dai_get_drvdata(dai);
-	int ret;
-
-	ret = regmap_write(drvdata->lpaif_map,
-			   LPAIF_I2SCTL_REG(drvdata->variant, dai->driver->id),
-			   0);
-	if (ret)
-		dev_err(dai->dev, "error writing to i2sctl reg: %d\n", ret);
-
-	return ret;
-}
-
 static int lpass_cpu_daiops_prepare(struct snd_pcm_substream *substream,
 		struct snd_soc_dai *dai)
 {

@@ -277,7 +262,6 @@ const struct snd_soc_dai_ops asoc_qcom_lpass_cpu_dai_ops = {
 	.startup	= lpass_cpu_daiops_startup,
 	.shutdown	= lpass_cpu_daiops_shutdown,
 	.hw_params	= lpass_cpu_daiops_hw_params,
-	.hw_free	= lpass_cpu_daiops_hw_free,
 	.prepare	= lpass_cpu_daiops_prepare,
 	.trigger	= lpass_cpu_daiops_trigger,
 };

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 14:11 UTC #48 lore raw

PATCH 48/191 brcmfmac: check ndev pointer

From: Tom Rix <[email protected]>

[ Upstream commit 9c9f015bc9f8839831c7ba0a6d731a3853c464e2 ]

Clang static analysis reports this error

brcmfmac/core.c:490:4: warning: Dereference of null pointer

        (*ifp)->ndev->stats.rx_errors++;
        ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

In this block of code

	if (ret || !(*ifp) || !(*ifp)->ndev) {
		if (ret != -ENODATA && *ifp)
			(*ifp)->ndev->stats.rx_errors++;
		brcmu_pkt_buf_free_skb(skb);
		return -ENODATA;
	}

(*ifp)->ndev being NULL is caught as an error
But then it is used to report the error.

So add a check before using it.

Fixes 91b632803ee4 ("brcmfmac: Use net_device_stats from struct net_device")

Signed-off-by Tom Rix <[email protected]>

Signed-off-by Kalle Valo <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c +1 -1

index bfc0e37b7f344..590bef2defb94 100644
@@ -318,7 +318,7 @@ static int brcmf_rx_hdrpull(struct brcmf_pub *drvr, struct sk_buff *skb,
 	ret = brcmf_proto_hdrpull(drvr, true, skb, ifp);
 
 	if (ret || !(*ifp) || !(*ifp)->ndev) {
-		if (ret != -ENODATA && *ifp)
+		if (ret != -ENODATA && *ifp && (*ifp)->ndev)
 			(*ifp)->ndev->stats.rx_errors++;
 		brcmu_pkt_buf_free_skb(skb);
 		return -ENODATA;

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 14:11 UTC #49 lore raw

PATCH 49/191 mwifiex: Do not use GFP_KERNEL in atomic context

From: Christophe JAILLET <[email protected]>

[ Upstream commit d2ab7f00f4321370a8ee14e5630d4349fdacc42e ]

A possible call chain is as follow:

  mwifiex_sdio_interrupt                            (sdio.c)
    --> mwifiex_main_process                        (main.c)
      --> mwifiex_process_cmdresp                   (cmdevt.c)
        --> mwifiex_process_sta_cmdresp             (sta_cmdresp.c)
          --> mwifiex_ret_802_11_scan               (scan.c)
            --> mwifiex_parse_single_response_buf   (scan.c)

'mwifiex_sdio_interrupt()' is an interrupt function.

Also note that 'mwifiex_ret_802_11_scan()' already uses GFP_ATOMIC.

So use GFP_ATOMIC instead of GFP_KERNEL when memory is allocated in 'mwifiex_parse_single_response_buf()'.

Fixes 7c6fa2a843c5 ("mwifiex: use cfg80211 dynamic scan table and cfg80211_get_bss API")

Fixes 601216e12c65e ("mwifiex: process RX packets in SDIO IRQ thread directly")

Signed-off-by Christophe JAILLET <[email protected]>

Signed-off-by Kalle Valo <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/net/wireless/marvell/mwifiex/scan.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

drivers/net/wireless/marvell/mwifiex/scan.c +1 -1

index 0071c40afe81b..a95b1368dad71 100644
@@ -1890,7 +1890,7 @@ mwifiex_parse_single_response_buf(struct mwifiex_private *priv, u8 **bss_info,
 					    chan, CFG80211_BSS_FTYPE_UNKNOWN,
 					    bssid, timestamp,
 					    cap_info_bitmap, beacon_period,
-					    ie_buf, ie_len, rssi, GFP_KERNEL);
+					    ie_buf, ie_len, rssi, GFP_ATOMIC);
 			if (bss) {
 				bss_priv = (struct mwifiex_bss_priv *)bss->priv;
 				bss_priv->band = band;

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 14:13 UTC #50 lore raw

PATCH 50/191 drm/gma500: fix error check

Link https://patchwork.freedesktop.org/patch/msgid/[email protected]

From: Tom Rix <[email protected]>

[ Upstream commit cdd296cdae1af2d27dae3fcfbdf12c5252ab78cf ]

Reviewing this block of code in cdv_intel_dp_init()

ret = cdv_intel_dp_aux_native_read(gma_encoder, DP_DPCD_REV, ...

cdv_intel_edp_panel_vdd_off(gma_encoder);

if (ret == 0) {
	/* if this fails, presume the device is a ghost */
	DRM_INFO("failed to retrieve link info, disabling eDP\n");
	drm_encoder_cleanup(encoder);
	cdv_intel_dp_destroy(connector);
	goto err_priv;
} else {

The (ret == 0) is not strict enough. cdv_intel_dp_aux_native_read() returns > 0 on success otherwise it is failure.

So change to <=

Fixes d112a8163f83 ("gma500/cdv: Add eDP support")

Signed-off-by Tom Rix <[email protected]>

Signed-off-by Patrik Jakobsson <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/gpu/drm/gma500/cdv_intel_dp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

drivers/gpu/drm/gma500/cdv_intel_dp.c +1 -1

index c52f9adf5e04c..7ec4e3fbafd8c 100644
@@ -2121,7 +2121,7 @@ cdv_intel_dp_init(struct drm_device *dev, struct psb_intel_mode_device *mode_dev
 					       intel_dp->dpcd,
 					       sizeof(intel_dp->dpcd));
 		cdv_intel_edp_panel_vdd_off(gma_encoder);
-		if (ret == 0) {
+		if (ret <= 0) {
 			/* if this fails, presume the device is a ghost */
 			DRM_INFO("failed to retrieve link info, disabling eDP\n");
 			cdv_intel_dp_encoder_destroy(encoder);

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 14:12 UTC #51 lore raw

PATCH 51/191 scsi: qla4xxx: Fix an error handling path in qla4xxx_get_host_stats()

From: Christophe JAILLET <[email protected]>

[ Upstream commit 574918e69720fe62ab3eb42ec3750230c8d16b06 ]

Update the size used in 'dma_free_coherent()' in order to match the one used in the corresponding 'dma_alloc_coherent()'.

Link https://lore.kernel.org/r/[email protected] open here

Fixes 4161cee52df8 ("[SCSI] qla4xxx: Add host statistics support")

Signed-off-by Christophe JAILLET <[email protected]>

Signed-off-by Martin K. Petersen <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/scsi/qla4xxx/ql4_os.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

drivers/scsi/qla4xxx/ql4_os.c +1 -1

index fb3abaf817a35..62022a66e9ee2 100644
@@ -1223,7 +1223,7 @@ static int qla4xxx_get_host_stats(struct Scsi_Host *shost, char *buf, int len)
 			le64_to_cpu(ql_iscsi_stats->iscsi_sequence_error);
 exit_host_stats:
 	if (ql_iscsi_stats)
-		dma_free_coherent(&ha->pdev->dev, host_stats_size,
+		dma_free_coherent(&ha->pdev->dev, stats_size,
 				  ql_iscsi_stats, iscsi_stats_dma);
 
 	ql4_printk(KERN_INFO, ha, "%s: Get host stats done\n",

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 14:12 UTC #52 lore raw

PATCH 52/191 scsi: csiostor: Fix wrong return value in csio_hw_prep_fw()

From: Tianjia Zhang <[email protected]>

[ Upstream commit 44f4daf8678ae5f08c93bbe70792f90cd88e4649 ]

On an error exit path, a negative error code should be returned instead of a positive return value.

Link https://lore.kernel.org/r/[email protected] open here

Fixes f40e74ffa3de ("csiostor:firmware upgrade fix")

Cc Praveen Madhavan <[email protected]>

Signed-off-by Tianjia Zhang <[email protected]>

Signed-off-by Martin K. Petersen <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/scsi/csiostor/csio_hw.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

drivers/scsi/csiostor/csio_hw.c +1 -1

index ab30db8c36c6f..bbcba3d08d495 100644
@@ -1997,7 +1997,7 @@ static int csio_hw_prep_fw(struct csio_hw *hw, struct fw_info *fw_info,
 			FW_HDR_FW_VER_MICRO_G(c), FW_HDR_FW_VER_BUILD_G(c),
 			FW_HDR_FW_VER_MAJOR_G(k), FW_HDR_FW_VER_MINOR_G(k),
 			FW_HDR_FW_VER_MICRO_G(k), FW_HDR_FW_VER_BUILD_G(k));
-		ret = EINVAL;
+		ret = -EINVAL;
 		goto bye;
 	}

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 14:12 UTC #53 lore raw

PATCH 53/191 backlight: sky81452-backlight: Fix refcount imbalance on error

From: [email protected] <[email protected]>

[ Upstream commit b7a4f80bc316a56d6ec8750e93e66f42431ed960 ]

When of_property_read_u32_array() returns an error code, a pairing refcount decrement is needed to keep np's refcount balanced.

Fixes f705806c9f355 ("backlight: Add support Skyworks SKY81452 backlight driver")

Signed-off-by Dinghao Liu <[email protected]>

Reviewed-by Daniel Thompson <[email protected]>

Signed-off-by Lee Jones <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/video/backlight/sky81452-backlight.c | 1 +
 1 file changed, 1 insertion(+)

drivers/video/backlight/sky81452-backlight.c +1 -0

index d414c7a3acf5a..a2f77625b7170 100644
@@ -207,6 +207,7 @@ static struct sky81452_bl_platform_data *sky81452_bl_parse_dt(
 					num_entry);
 		if (ret < 0) {
 			dev_err(dev, "led-sources node is invalid.\n");
+			of_node_put(np);
 			return ERR_PTR(-EINVAL);
 		}

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 18:11 UTC #54 lore raw

PATCH 54/191 VMCI: check return value of get_user_pages_fast() for errors

From: Alex Dewar <[email protected]>

[ Upstream commit 90ca6333fd65f318c47bff425e1ea36c0a5539f6 ]

In a couple of places in qp_host_get_user_memory(), get_user_pages_fast() is called without properly checking for errors. If e.g. -EFAULT is returned, this negative value will then be passed on to qp_release_pages(), which expects a u64 as input.

Fix this by only calling qp_release_pages() when we have a positive number returned.

Fixes 06164d2b72aa ("VMCI: queue pairs implementation.")

Signed-off-by Alex Dewar <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Greg Kroah-Hartman <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/misc/vmw_vmci/vmci_queue_pair.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

drivers/misc/vmw_vmci/vmci_queue_pair.c +6 -4

index b4570d5c1fe7d..d6210bf92c1f2 100644
@@ -758,8 +758,9 @@ static int qp_host_get_user_memory(u64 produce_uva,
 	if (retval < (int)produce_q->kernel_if->num_pages) {
 		pr_debug("get_user_pages_fast(produce) failed (retval=%d)",
 			retval);
-		qp_release_pages(produce_q->kernel_if->u.h.header_page,
-				 retval, false);
+		if (retval > 0)
+			qp_release_pages(produce_q->kernel_if->u.h.header_page,
+					retval, false);
 		err = VMCI_ERROR_NO_MEM;
 		goto out;
 	}

@@ -770,8 +771,9 @@ static int qp_host_get_user_memory(u64 produce_uva,
 	if (retval < (int)consume_q->kernel_if->num_pages) {
 		pr_debug("get_user_pages_fast(consume) failed (retval=%d)",
 			retval);
-		qp_release_pages(consume_q->kernel_if->u.h.header_page,
-				 retval, false);
+		if (retval > 0)
+			qp_release_pages(consume_q->kernel_if->u.h.header_page,
+					retval, false);
 		qp_release_pages(produce_q->kernel_if->u.h.header_page,
 				 produce_q->kernel_if->num_pages, false);
 		err = VMCI_ERROR_NO_MEM;

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 14:12 UTC #55 lore raw

PATCH 55/191 tty: serial: earlycon dependency

From: Tong Zhang <[email protected]>

[ Upstream commit 0fb9342d06b0f667b915ba58bfefc030e534a218 ]

parse_options() in drivers/tty/serial/earlycon.c calls uart_parse_earlycon in drivers/tty/serial/serial_core.c therefore selecting SERIAL_EARLYCON should automatically select SERIAL_CORE, otherwise will result in symbol not found error during linking if SERIAL_CORE is not configured as builtin

Fixes 9aac5887595b ("tty/serial: add generic serial earlycon")

Signed-off-by Tong Zhang <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Greg Kroah-Hartman <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/tty/serial/Kconfig | 1 +
 1 file changed, 1 insertion(+)

drivers/tty/serial/Kconfig +1 -0

index b788fee54249d..3628d37773034 100644
@@ -9,6 +9,7 @@ menu "Serial drivers"
 
 config SERIAL_EARLYCON
 	bool
+	depends on SERIAL_CORE
 	help
 	  Support for early consoles with the earlycon parameter. This enables
 	  the console before standard serial driver is probed. The console is

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 14:12 UTC #56 lore raw

PATCH 56/191 tty: hvcs: Dont NULL tty->driver_data until hvcs_cleanup()

From: Tyrel Datwyler <[email protected]>

[ Upstream commit 63ffcbdad738e3d1c857027789a2273df3337624 ]

The code currently NULLs tty->driver_data in hvcs_close() with the intent of informing the next call to hvcs_open() that device needs to be reconfigured. However, when hvcs_cleanup() is called we copy hvcsd from tty->driver_data which was previoulsy NULLed by hvcs_close() and our call to tty_port_put(&hvcsd->port) doesn't actually do anything since &hvcsd->port ends up translating to NULL by chance. This has the side effect that when hvcs_remove() is called we have one too many port references preventing hvcs_destuct_port() from ever being called. This also prevents us from reusing the /dev/hvcsX node in a future hvcs_probe() and we can eventually run out of /dev/hvcsX devices.

Fix this by waiting to NULL tty->driver_data in hvcs_cleanup().

Fixes 27bf7c43a19c ("TTY: hvcs, add tty install")

Signed-off-by Tyrel Datwyler <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Greg Kroah-Hartman <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/tty/hvc/hvcs.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

drivers/tty/hvc/hvcs.c +7 -7

index 63c29fe9d21f1..f77d7f39c113c 100644
@@ -1231,13 +1231,6 @@ static void hvcs_close(struct tty_struct *tty, struct file *filp)
 
 		tty_wait_until_sent(tty, HVCS_CLOSE_WAIT);
 
-		/*
-		 * This line is important because it tells hvcs_open that this
-		 * device needs to be re-configured the next time hvcs_open is
-		 * called.
-		 */
-		tty->driver_data = NULL;
-
 		free_irq(irq, hvcsd);
 		return;
 	} else if (hvcsd->port.count < 0) {

@@ -1252,6 +1245,13 @@ static void hvcs_cleanup(struct tty_struct * tty)
 {
 	struct hvcs_struct *hvcsd = tty->driver_data;
 
+	/*
+	 * This line is important because it tells hvcs_open that this
+	 * device needs to be re-configured the next time hvcs_open is
+	 * called.
+	 */
+	tty->driver_data = NULL;
+
 	tty_port_put(&hvcsd->port);
 }

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 14:12 UTC #57 lore raw

PATCH 57/191 pty: do tty_flip_buffer_push without port->lock in pty_write

From: Artem Savkov <[email protected]>

[ Upstream commit 71a174b39f10b4b93223d374722aa894b5d8a82e ]

b6da31b2c07c "tty: Fix data race in tty_insert_flip_string_fixed_flag" puts tty_flip_buffer_push under port->lock introducing the following possible circular locking dependency:

[30129.876566] ======================================================
[30129.876566] WARNING: possible circular locking dependency detected
[30129.876567] 5.9.0-rc2+ #3 Tainted: G S      W
[30129.876568] ------------------------------------------------------
[30129.876568] sysrq.sh/1222 is trying to acquire lock:
[30129.876569] ffffffff92c39480 (console_owner){....}-{0:0}, at: console_unlock+0x3fe/0xa90

[30129.876572] but task is already holding lock:
[30129.876572] ffff888107cb9018 (&pool->lock/1){-.-.}-{2:2}, at: show_workqueue_state.cold.55+0x15b/0x6ca

[30129.876576] which lock already depends on the new lock.

[30129.876577] the existing dependency chain (in reverse order) is:

[30129.876578] -> #3 (&pool->lock/1){-.-.}-{2:2}:
[30129.876581]        _raw_spin_lock+0x30/0x70
[30129.876581]        __queue_work+0x1a3/0x10f0
[30129.876582]        queue_work_on+0x78/0x80
[30129.876582]        pty_write+0x165/0x1e0
[30129.876583]        n_tty_write+0x47f/0xf00
[30129.876583]        tty_write+0x3d6/0x8d0
[30129.876584]        vfs_write+0x1a8/0x650

[30129.876588] -> #2 (&port->lock#2){-.-.}-{2:2}:
[30129.876590]        _raw_spin_lock_irqsave+0x3b/0x80
[30129.876591]        tty_port_tty_get+0x1d/0xb0
[30129.876592]        tty_port_default_wakeup+0xb/0x30
[30129.876592]        serial8250_tx_chars+0x3d6/0x970
[30129.876593]        serial8250_handle_irq.part.12+0x216/0x380
[30129.876593]        serial8250_default_handle_irq+0x82/0xe0
[30129.876594]        serial8250_interrupt+0xdd/0x1b0
[30129.876595]        __handle_irq_event_percpu+0xfc/0x850

[30129.876602] -> #1 (&port->lock){-.-.}-{2:2}:
[30129.876605]        _raw_spin_lock_irqsave+0x3b/0x80
[30129.876605]        serial8250_console_write+0x12d/0x900
[30129.876606]        console_unlock+0x679/0xa90
[30129.876606]        register_console+0x371/0x6e0
[30129.876607]        univ8250_console_init+0x24/0x27
[30129.876607]        console_init+0x2f9/0x45e

[30129.876609] -> #0 (console_owner){....}-{0:0}:
[30129.876611]        __lock_acquire+0x2f70/0x4e90
[30129.876612]        lock_acquire+0x1ac/0xad0
[30129.876612]        console_unlock+0x460/0xa90
[30129.876613]        vprintk_emit+0x130/0x420
[30129.876613]        printk+0x9f/0xc5
[30129.876614]        show_pwq+0x154/0x618
[30129.876615]        show_workqueue_state.cold.55+0x193/0x6ca
[30129.876615]        __handle_sysrq+0x244/0x460
[30129.876616]        write_sysrq_trigger+0x48/0x4a
[30129.876616]        proc_reg_write+0x1a6/0x240
[30129.876617]        vfs_write+0x1a8/0x650

[30129.876619] other info that might help us debug this:

[30129.876620] Chain exists of:
[30129.876621]   console_owner --> &port->lock#2 --> &pool->lock/1

[30129.876625]  Possible unsafe locking scenario:

[30129.876626]        CPU0                    CPU1
[30129.876626]        ----                    ----
[30129.876627]   lock(&pool->lock/1);
[30129.876628]                                lock(&port->lock#2);
[30129.876630]                                lock(&pool->lock/1);
[30129.876631]   lock(console_owner);

[30129.876633]  *** DEADLOCK ***

[30129.876634] 5 locks held by sysrq.sh/1222:
[30129.876634]  #0: ffff8881d3ce0470 (sb_writers#3){.+.+}-{0:0}, at: vfs_write+0x359/0x650
[30129.876637]  #1: ffffffff92c612c0 (rcu_read_lock){....}-{1:2}, at: __handle_sysrq+0x4d/0x460
[30129.876640]  #2: ffffffff92c612c0 (rcu_read_lock){....}-{1:2}, at: show_workqueue_state+0x5/0xf0
[30129.876642]  #3: ffff888107cb9018 (&pool->lock/1){-.-.}-{2:2}, at: show_workqueue_state.cold.55+0x15b/0x6ca
[30129.876645]  #4: ffffffff92c39980 (console_lock){+.+.}-{0:0}, at: vprintk_emit+0x123/0x420

[30129.876648] stack backtrace:
[30129.876649] CPU: 3 PID: 1222 Comm: sysrq.sh Tainted: G S      W         5.9.0-rc2+ #3
[30129.876649] Hardware name: Intel Corporation 2012 Client Platform/Emerald Lake 2, BIOS ACRVMBY1.86C.0078.P00.1201161002 01/16/2012
[30129.876650] Call Trace:
[30129.876650]  dump_stack+0x9d/0xe0
[30129.876651]  check_noncircular+0x34f/0x410
[30129.876653]  __lock_acquire+0x2f70/0x4e90
[30129.876656]  lock_acquire+0x1ac/0xad0
[30129.876658]  console_unlock+0x460/0xa90
[30129.876660]  vprintk_emit+0x130/0x420
[30129.876660]  printk+0x9f/0xc5
[30129.876661]  show_pwq+0x154/0x618
[30129.876662]  show_workqueue_state.cold.55+0x193/0x6ca
[30129.876664]  __handle_sysrq+0x244/0x460
[30129.876665]  write_sysrq_trigger+0x48/0x4a
[30129.876665]  proc_reg_write+0x1a6/0x240
[30129.876666]  vfs_write+0x1a8/0x650

It looks like the commit was aimed to protect tty_insert_flip_string and there is no need for tty_flip_buffer_push to be under this lock.

Fixes b6da31b2c07c ("tty: Fix data race in tty_insert_flip_string_fixed_flag")

Signed-off-by Artem Savkov <[email protected]>

Acked-by Jiri Slaby <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Greg Kroah-Hartman <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/tty/pty.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

drivers/tty/pty.c +1 -1

index b3208b1b1028d..bca47176db4c2 100644
@@ -120,10 +120,10 @@ static int pty_write(struct tty_struct *tty, const unsigned char *buf, int c)
 		spin_lock_irqsave(&to->port->lock, flags);
 		/* Stuff the data into the input queue of the other end */
 		c = tty_insert_flip_string(to->port, buf, c);
+		spin_unlock_irqrestore(&to->port->lock, flags);
 		/* And shovel */
 		if (c)
 			tty_flip_buffer_push(to->port);
-		spin_unlock_irqrestore(&to->port->lock, flags);
 	}
 	return c;
 }

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 18:11 UTC #58 lore raw

PATCH 58/191 pwm: lpss: Fix off by one error in base_unit math in pwm_lpss_prepare()

From: Hans de Goede <[email protected]>

[ Upstream commit 181f4d2f44463fe09fe4df02e03095cb87151c29 ]

According to the data-sheet the way the PWM controller works is that each input clock-cycle the base_unit gets added to a N bit counter and that counter overflowing determines the PWM output frequency.

So assuming e.g. a 16 bit counter this means that if base_unit is set to 1, after 65535 input clock-cycles the counter has been increased from 0 to 65535 and it will overflow on the next cycle, so it will overflow after every 65536 clock cycles and thus the calculations done in pwm_lpss_prepare() should use 65536 and not 65535.

This commit fixes this. Note this also aligns the calculations in pwm_lpss_prepare() with those in pwm_lpss_get_state().

Note this effectively reverts commit 684309e5043e ("pwm: lpss: Avoid potential overflow of base_unit"). The next patch in this series really fixes the potential overflow of the base_unit value.

Fixes 684309e5043e ("pwm: lpss: Avoid potential overflow of base_unit")

Link https://patchwork.freedesktop.org/patch/msgid/[email protected]

Acked-by Uwe Kleine-König <[email protected]>

Acked-by Thierry Reding <[email protected]>

Signed-off-by Hans de Goede <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/pwm/pwm-lpss.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

drivers/pwm/pwm-lpss.c +3 -3

index 7a4a6406cf69a..da63c029aa286 100644
@@ -105,7 +105,7 @@ static void pwm_lpss_prepare(struct pwm_lpss_chip *lpwm, struct pwm_device *pwm,
 	 * The equation is:
 	 * base_unit = round(base_unit_range * freq / c)
 	 */
-	base_unit_range = BIT(lpwm->info->base_unit_bits) - 1;
+	base_unit_range = BIT(lpwm->info->base_unit_bits);
 	freq *= base_unit_range;
 
 	base_unit = DIV_ROUND_CLOSEST_ULL(freq, c);

@@ -116,8 +116,8 @@ static void pwm_lpss_prepare(struct pwm_lpss_chip *lpwm, struct pwm_device *pwm,
 
 	orig_ctrl = ctrl = pwm_lpss_read(pwm);
 	ctrl &= ~PWM_ON_TIME_DIV_MASK;
-	ctrl &= ~(base_unit_range << PWM_BASE_UNIT_SHIFT);
-	base_unit &= base_unit_range;
+	ctrl &= ~((base_unit_range - 1) << PWM_BASE_UNIT_SHIFT);
+	base_unit &= (base_unit_range - 1);
 	ctrl |= (u32) base_unit << PWM_BASE_UNIT_SHIFT;
 	ctrl |= on_time_div;

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 14:15 UTC #59 lore raw

PATCH 59/191 pwm: lpss: Add range limit check for the base_unit register value

From: Hans de Goede <[email protected]>

[ Upstream commit ef9f60daab309558c8bb3e086a9a11ee40bd6061 ]

When the user requests a high enough period ns value, then the calculations in pwm_lpss_prepare() might result in a base_unit value of 0.

But according to the data-sheet the way the PWM controller works is that each input clock-cycle the base_unit gets added to a N bit counter and that counter overflowing determines the PWM output frequency. Adding 0 to the counter is a no-op. The data-sheet even explicitly states that writing 0 to the base_unit bits will result in the PWM outputting a continuous 0 signal.

When the user requestes a low enough period ns value, then the calculations in pwm_lpss_prepare() might result in a base_unit value which is bigger then base_unit_range - 1. Currently the codes for this deals with this by applying a mask:

	base_unit &= (base_unit_range - 1);

But this means that we let the value overflow the range, we throw away the higher bits and store whatever value is left in the lower bits into the register leading to a random output frequency, rather then clamping the output frequency to the highest frequency which the hardware can do.

This commit fixes both issues by clamping the base_unit value to be between 1 and (base_unit_range - 1).

Fixes 684309e5043e ("pwm: lpss: Avoid potential overflow of base_unit")

Link https://patchwork.freedesktop.org/patch/msgid/[email protected]

Acked-by Thierry Reding <[email protected]>

Signed-off-by Hans de Goede <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/pwm/pwm-lpss.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

drivers/pwm/pwm-lpss.c +2 -1

index da63c029aa286..69f8be065919e 100644
@@ -109,6 +109,8 @@ static void pwm_lpss_prepare(struct pwm_lpss_chip *lpwm, struct pwm_device *pwm,
 	freq *= base_unit_range;
 
 	base_unit = DIV_ROUND_CLOSEST_ULL(freq, c);
+	/* base_unit must not be 0 and we also want to avoid overflowing it */
+	base_unit = clamp_val(base_unit, 1, base_unit_range - 1);
 
 	on_time_div = 255ULL * duty_ns;
 	do_div(on_time_div, period_ns);

@@ -117,7 +119,6 @@ static void pwm_lpss_prepare(struct pwm_lpss_chip *lpwm, struct pwm_device *pwm,
 	orig_ctrl = ctrl = pwm_lpss_read(pwm);
 	ctrl &= ~PWM_ON_TIME_DIV_MASK;
 	ctrl &= ~((base_unit_range - 1) << PWM_BASE_UNIT_SHIFT);
-	base_unit &= (base_unit_range - 1);
 	ctrl |= (u32) base_unit << PWM_BASE_UNIT_SHIFT;
 	ctrl |= on_time_div;

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 14:12 UTC #60 lore raw

PATCH 60/191 drivers/virt/fsl_hypervisor: Fix error handling path

From: Souptick Joarder <[email protected]>

[ Upstream commit 7f360bec37857bfd5a48cef21d86f58a09a3df63 ]

First, when memory allocation for sg_list_unaligned failed, there is a bug of calling put_pages() as we haven't pinned any pages.

Second, if get_user_pages_fast() failed we should unpin num_pinned pages.

This will address both.

As part of these changes, minor update in documentation.

Fixes 6db7199407ca ("drivers/virt: introduce Freescale hypervisor management driver")

Signed-off-by Souptick Joarder <[email protected]>

Reviewed-by Dan Carpenter <[email protected]>

Reviewed-by John Hubbard <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Greg Kroah-Hartman <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/virt/fsl_hypervisor.c | 17 ++++++++---------
 1 file changed, 8 insertions(+), 9 deletions(-)

drivers/virt/fsl_hypervisor.c +8 -9

index 2e1678d22f6ff..1799bfb382e50 100644
@@ -157,7 +157,7 @@ static long ioctl_memcpy(struct fsl_hv_ioctl_memcpy __user *p)
 
 	unsigned int i;
 	long ret = 0;
-	int num_pinned; /* return value from get_user_pages() */
+	int num_pinned = 0; /* return value from get_user_pages_fast() */
 	phys_addr_t remote_paddr; /* The next address in the remote buffer */
 	uint32_t count; /* The number of bytes left to copy */

@@ -174,7 +174,7 @@ static long ioctl_memcpy(struct fsl_hv_ioctl_memcpy __user *p)
 		return -EINVAL;
 
 	/*
-	 * The array of pages returned by get_user_pages() covers only
+	 * The array of pages returned by get_user_pages_fast() covers only
 	 * page-aligned memory.  Since the user buffer is probably not
 	 * page-aligned, we need to handle the discrepancy.
 	 *

@@ -224,7 +224,7 @@ static long ioctl_memcpy(struct fsl_hv_ioctl_memcpy __user *p)
 
 	/*
 	 * 'pages' is an array of struct page pointers that's initialized by
-	 * get_user_pages().
+	 * get_user_pages_fast().
 	 */
 	pages = kzalloc(num_pages * sizeof(struct page *), GFP_KERNEL);
 	if (!pages) {

@@ -241,7 +241,7 @@ static long ioctl_memcpy(struct fsl_hv_ioctl_memcpy __user *p)
 	if (!sg_list_unaligned) {
 		pr_debug("fsl-hv: could not allocate S/G list\n");
 		ret = -ENOMEM;
-		goto exit;
+		goto free_pages;
 	}
 	sg_list = PTR_ALIGN(sg_list_unaligned, sizeof(struct fh_sg_list));

@@ -250,7 +250,6 @@ static long ioctl_memcpy(struct fsl_hv_ioctl_memcpy __user *p)
 		num_pages, pages, (param.source == -1) ? 0 : FOLL_WRITE);
 
 	if (num_pinned != num_pages) {
-		/* get_user_pages() failed */
 		pr_debug("fsl-hv: could not lock source buffer\n");
 		ret = (num_pinned < 0) ? num_pinned : -EFAULT;
 		goto exit;

@@ -292,13 +291,13 @@ static long ioctl_memcpy(struct fsl_hv_ioctl_memcpy __user *p)
 		virt_to_phys(sg_list), num_pages);
 
 exit:
-	if (pages) {
-		for (i = 0; i < num_pages; i++)
-			if (pages[i])
-				put_page(pages[i]);
+	if (pages && (num_pinned > 0)) {
+		for (i = 0; i < num_pinned; i++)
+			put_page(pages[i]);
 	}
 
 	kfree(sg_list_unaligned);
+free_pages:
 	kfree(pages);
 
 	if (!ret)

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 14:12 UTC #61 lore raw

PATCH 61/191 video: fbdev: vga16fb: fix setting of pixclock because a pass-by-value error

Link https://patchwork.freedesktop.org/patch/msgid/[email protected]

From: Colin Ian King <[email protected]>

[ Upstream commit c72fab81ceaa54408b827a2f0486d9a0f4be34cf ]

The pixclock is being set locally because it is being passed as a pass-by-value argument rather than pass-by-reference, so the computed pixclock is never being set in var->pixclock. Fix this by passing by reference.

[This dates back to 2002, I found the offending commit from the git history git://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git ]

Addresses-Coverity: ("Unused value")

Signed-off-by Colin Ian King <[email protected]>

Cc Daniel Vetter <[email protected]>

Cc Jani Nikula <[email protected]>

[b.zolnierkie: minor patch summary fixup]

[b.zolnierkie: removed "Fixes:" tag (not in upstream tree)]

Signed-off-by Bartlomiej Zolnierkiewicz <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/video/fbdev/vga16fb.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

drivers/video/fbdev/vga16fb.c +7 -7

index ee6957a799bb6..aea8fd85cbf70 100644
@@ -243,7 +243,7 @@ static void vga16fb_update_fix(struct fb_info *info)
 }
 
 static void vga16fb_clock_chip(struct vga16fb_par *par,
-			       unsigned int pixclock,
+			       unsigned int *pixclock,
 			       const struct fb_info *info,
 			       int mul, int div)
 {

@@ -259,14 +259,14 @@ static void vga16fb_clock_chip(struct vga16fb_par *par,
 		{     0 /* bad */,    0x00, 0x00}};
 	int err;
 
-	pixclock = (pixclock * mul) / div;
+	*pixclock = (*pixclock * mul) / div;
 	best = vgaclocks;
-	err = pixclock - best->pixclock;
+	err = *pixclock - best->pixclock;
 	if (err < 0) err = -err;
 	for (ptr = vgaclocks + 1; ptr->pixclock; ptr++) {
 		int tmp;
 
-		tmp = pixclock - ptr->pixclock;
+		tmp = *pixclock - ptr->pixclock;
 		if (tmp < 0) tmp = -tmp;
 		if (tmp < err) {
 			err = tmp;

@@ -275,7 +275,7 @@ static void vga16fb_clock_chip(struct vga16fb_par *par,
 	}
 	par->misc |= best->misc;
 	par->clkdiv = best->seq_clock_mode;
-	pixclock = (best->pixclock * div) / mul;		
+	*pixclock = (best->pixclock * div) / mul;
 }
 			       
 #define FAIL(X) return -EINVAL

@@ -497,10 +497,10 @@ static int vga16fb_check_var(struct fb_var_screeninfo *var,
 
 	if (mode & MODE_8BPP)
 		/* pixel clock == vga clock / 2 */
-		vga16fb_clock_chip(par, var->pixclock, info, 1, 2);
+		vga16fb_clock_chip(par, &var->pixclock, info, 1, 2);
 	else
 		/* pixel clock == vga clock */
-		vga16fb_clock_chip(par, var->pixclock, info, 1, 1);
+		vga16fb_clock_chip(par, &var->pixclock, info, 1, 1);
 	
 	var->red.offset = var->green.offset = var->blue.offset = 
 	var->transp.offset = 0;

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 18:09 UTC #62 lore raw

PATCH 62/191 video: fbdev: sis: fix null ptr dereference

Link https://patchwork.freedesktop.org/patch/msgid/[email protected]

From: Tom Rix <[email protected]>

[ Upstream commit ad6f93e9cd56f0b10e9b22e3e137d17a1a035242 ]

Clang static analysis reports this representative error

init.c:2501:18: warning: Array access (from variable 'queuedata') results
in a null pointer dereference

      templ |= ((queuedata[i] & 0xc0) << 3);

This is the problem block of code

   if(ModeNo > 0x13) {
      ...
      if(SiS_Pr->ChipType == SIS_730) {
	 queuedata = &FQBQData730[0];
      } else {
	 queuedata = &FQBQData[0];
      }

} else {

queuedata is not set in the else block

Reviewing the old code, the arrays FQBQData730 and FQBQData were used directly.

So hoist the setting of queuedata out of the if-else block.

Fixes 544393fe584d ("[PATCH] sisfb update")

Signed-off-by Tom Rix <[email protected]>

Cc Thomas Winischhofer <[email protected]>

Cc Andrew Morton <[email protected]>

Signed-off-by Bartlomiej Zolnierkiewicz <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/video/fbdev/sis/init.c | 11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)

drivers/video/fbdev/sis/init.c +5 -6

index dfe3eb769638b..fde27feae5d0c 100644
@@ -2428,6 +2428,11 @@ SiS_SetCRT1FIFO_630(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
 
    i = 0;
 
+	if (SiS_Pr->ChipType == SIS_730)
+		queuedata = &FQBQData730[0];
+	else
+		queuedata = &FQBQData[0];
+
    if(ModeNo > 0x13) {
 
       /* Get VCLK  */

@@ -2445,12 +2450,6 @@ SiS_SetCRT1FIFO_630(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
       /* Get half colordepth */
       colorth = colortharray[(SiS_Pr->SiS_ModeType - ModeEGA)];
 
-      if(SiS_Pr->ChipType == SIS_730) {
-	 queuedata = &FQBQData730[0];
-      } else {
-	 queuedata = &FQBQData[0];
-      }
-
       do {
 	 templ = SiS_CalcDelay2(SiS_Pr, queuedata[i]) * VCLK * colorth;

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 14:12 UTC #63 lore raw

PATCH 63/191 HID: roccat: add bounds checking in kone_sysfs_write_settings()

From: Dan Carpenter <[email protected]>

[ Upstream commit d4f98dbfe717490e771b6e701904bfcf4b4557f0 ]

This code doesn't check if "settings->startup_profile" is within bounds and that could result in an out of bounds array access. What the code does do is it checks if the settings can be written to the firmware, so it's possible that the firmware has a bounds check? It's safer and easier to verify when the bounds checking is done in the kernel.

Fixes 14bf62cde794 ("HID: add driver for Roccat Kone gaming mouse")

Signed-off-by Jiri Kosina <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/hid/hid-roccat-kone.c | 23 ++++++++++++++++-------
 1 file changed, 16 insertions(+), 7 deletions(-)

drivers/hid/hid-roccat-kone.c +16 -7

index bf4675a273965..9be8c31f613fd 100644
@@ -297,31 +297,40 @@ static ssize_t kone_sysfs_write_settings(struct file *fp, struct kobject *kobj,
 	struct kone_device *kone = hid_get_drvdata(dev_get_drvdata(dev));
 	struct usb_device *usb_dev = interface_to_usbdev(to_usb_interface(dev));
 	int retval = 0, difference, old_profile;
+	struct kone_settings *settings = (struct kone_settings *)buf;
 
 	/* I need to get my data in one piece */
 	if (off != 0 || count != sizeof(struct kone_settings))
 		return -EINVAL;
 
 	mutex_lock(&kone->kone_lock);
-	difference = memcmp(buf, &kone->settings, sizeof(struct kone_settings));
+	difference = memcmp(settings, &kone->settings,
+			    sizeof(struct kone_settings));
 	if (difference) {
-		retval = kone_set_settings(usb_dev,
-				(struct kone_settings const *)buf);
-		if (retval) {
-			mutex_unlock(&kone->kone_lock);
-			return retval;
+		if (settings->startup_profile < 1 ||
+		    settings->startup_profile > 5) {
+			retval = -EINVAL;
+			goto unlock;
 		}
 
+		retval = kone_set_settings(usb_dev, settings);
+		if (retval)
+			goto unlock;
+
 		old_profile = kone->settings.startup_profile;
-		memcpy(&kone->settings, buf, sizeof(struct kone_settings));
+		memcpy(&kone->settings, settings, sizeof(struct kone_settings));
 
 		kone_profile_activated(kone, kone->settings.startup_profile);
 
 		if (kone->settings.startup_profile != old_profile)
 			kone_profile_report(kone, kone->settings.startup_profile);
 	}
+unlock:
 	mutex_unlock(&kone->kone_lock);
 
+	if (retval)
+		return retval;
+
 	return sizeof(struct kone_settings);
 }
 static BIN_ATTR(settings, 0660, kone_sysfs_read_settings,

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 14:12 UTC #64 lore raw

PATCH 64/191 pinctrl: mcp23s08: Fix mcp23x17_regmap initialiser

From: Thomas Preston <[email protected]>

[ Upstream commit b445f6237744df5e8d4f56f8733b2108c611220a ]

The mcp23x17_regmap is initialised with structs named "mcp23x16". However, the mcp23s08 driver doesn't support the MCP23016 device yet, so this appears to be a typo.

Fixes 8f38910ba4f6 ("pinctrl: mcp23s08: switch to regmap caching")

Signed-off-by Thomas Preston <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Linus Walleij <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/pinctrl/pinctrl-mcp23s08.c | 22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)

drivers/pinctrl/pinctrl-mcp23s08.c +11 ~~-11~~

index 22558bf294246..12e7f7c54ffaa 100644
@@ -119,7 +119,7 @@ static const struct regmap_config mcp23x08_regmap = {
 	.max_register = MCP_OLAT,
 };
 
-static const struct reg_default mcp23x16_defaults[] = {
+static const struct reg_default mcp23x17_defaults[] = {
 	{.reg = MCP_IODIR << 1,		.def = 0xffff},
 	{.reg = MCP_IPOL << 1,		.def = 0x0000},
 	{.reg = MCP_GPINTEN << 1,	.def = 0x0000},

@@ -130,23 +130,23 @@ static const struct reg_default mcp23x16_defaults[] = {
 	{.reg = MCP_OLAT << 1,		.def = 0x0000},
 };
 
-static const struct regmap_range mcp23x16_volatile_range = {
+static const struct regmap_range mcp23x17_volatile_range = {
 	.range_min = MCP_INTF << 1,
 	.range_max = MCP_GPIO << 1,
 };
 
-static const struct regmap_access_table mcp23x16_volatile_table = {
-	.yes_ranges = &mcp23x16_volatile_range,
+static const struct regmap_access_table mcp23x17_volatile_table = {
+	.yes_ranges = &mcp23x17_volatile_range,
 	.n_yes_ranges = 1,
 };
 
-static const struct regmap_range mcp23x16_precious_range = {
+static const struct regmap_range mcp23x17_precious_range = {
 	.range_min = MCP_GPIO << 1,
 	.range_max = MCP_GPIO << 1,
 };
 
-static const struct regmap_access_table mcp23x16_precious_table = {
-	.yes_ranges = &mcp23x16_precious_range,
+static const struct regmap_access_table mcp23x17_precious_table = {
+	.yes_ranges = &mcp23x17_precious_range,
 	.n_yes_ranges = 1,
 };

@@ -156,10 +156,10 @@ static const struct regmap_config mcp23x17_regmap = {
 
 	.reg_stride = 2,
 	.max_register = MCP_OLAT << 1,
-	.volatile_table = &mcp23x16_volatile_table,
-	.precious_table = &mcp23x16_precious_table,
-	.reg_defaults = mcp23x16_defaults,
-	.num_reg_defaults = ARRAY_SIZE(mcp23x16_defaults),
+	.volatile_table = &mcp23x17_volatile_table,
+	.precious_table = &mcp23x17_precious_table,
+	.reg_defaults = mcp23x17_defaults,
+	.num_reg_defaults = ARRAY_SIZE(mcp23x17_defaults),
 	.cache_type = REGCACHE_FLAT,
 	.val_format_endian = REGMAP_ENDIAN_LITTLE,
 };

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 18:11 UTC #65 lore raw

PATCH 65/191 pinctrl: mcp23s08: Fix mcp23x17 precious range

[0] https://ww1.microchip.com/downloads/en/DeviceDoc/20001952C.pdf

From: Thomas Preston <[email protected]>

[ Upstream commit b9b7fb29433b906635231d0a111224efa009198c ]

On page 23 of the datasheet [0] it says "The register remains unchanged until the interrupt is cleared via a read of INTCAP or GPIO." Include INTCAPA and INTCAPB registers in precious range, so that they aren't accidentally cleared when we read via debugfs.

Fixes 8f38910ba4f6 ("pinctrl: mcp23s08: switch to regmap caching")

Signed-off-by Thomas Preston <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Linus Walleij <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/pinctrl/pinctrl-mcp23s08.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

drivers/pinctrl/pinctrl-mcp23s08.c +1 -1

index 12e7f7c54ffaa..5971338c87572 100644
@@ -141,7 +141,7 @@ static const struct regmap_access_table mcp23x17_volatile_table = {
 };
 
 static const struct regmap_range mcp23x17_precious_range = {
-	.range_min = MCP_GPIO << 1,
+	.range_min = MCP_INTCAP << 1,
 	.range_max = MCP_GPIO << 1,
 };

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 14:12 UTC #66 lore raw

PATCH 66/191 ath6kl: wmi: prevent a shift wrapping bug in ath6kl_wmi_delete_pstream_cmd()

From: Dan Carpenter <[email protected]>

[ Upstream commit 6a950755cec1a90ddaaff3e4acb5333617441c32 ]

The "tsid" is a user controlled u8 which comes from debugfs. Values more than 15 are invalid because "active_tsids" is a 16 bit variable. If the value of "tsid" is more than 31 then that leads to a shift wrapping bug.

Fixes 8fffd9e5ec9e ("ath6kl: Implement support for QOS-enable and QOS-disable from userspace")

Link https://lore.kernel.org/r/20200918142732.GA909725@mwanda open here

Signed-off-by Kalle Valo <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/net/wireless/ath/ath6kl/wmi.c | 5 +++++
 1 file changed, 5 insertions(+)

drivers/net/wireless/ath/ath6kl/wmi.c +5 -0

index d79c2bccf5822..f80f1757b58fc 100644
@@ -2648,6 +2648,11 @@ int ath6kl_wmi_delete_pstream_cmd(struct wmi *wmi, u8 if_idx, u8 traffic_class,
 		return -EINVAL;
 	}
 
+	if (tsid >= 16) {
+		ath6kl_err("invalid tsid: %d\n", tsid);
+		return -EINVAL;
+	}
+
 	skb = ath6kl_wmi_get_new_buf(sizeof(*cmd));
 	if (!skb)
 		return -ENOMEM;

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 18:15 UTC #67 lore raw

PATCH 67/191 misc: mic: scif: Fix error handling path

From: Souptick Joarder <[email protected]>

[ Upstream commit a81072a9c0ae734b7889929b0bc070fe3f353f0e ]

Inside __scif_pin_pages(), when map_flags != SCIF_MAP_KERNEL it will call pin_user_pages_fast() to map nr_pages. However, pin_user_pages_fast() might fail with a return value -ERRNO.

The return value is stored in pinned_pages->nr_pages. which in turn is passed to unpin_user_pages(), which expects pinned_pages->nr_pages >=0, else disaster.

Fix this by assigning pinned_pages->nr_pages to 0 if pin_user_pages_fast() returns -ERRNO.

Fixes ba612aa8b487 ("misc: mic: SCIF memory registration and unregistration")

Cc John Hubbard <[email protected]>

Cc Ira Weiny <[email protected]>

Cc Dan Carpenter <[email protected]>

Reviewed-by John Hubbard <[email protected]>

Signed-off-by Souptick Joarder <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Greg Kroah-Hartman <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/misc/mic/scif/scif_rma.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

drivers/misc/mic/scif/scif_rma.c +2 -2

index 95745dc4e0ecf..f282c2eaab29b 100644
@@ -1404,6 +1404,8 @@ int __scif_pin_pages(void *addr, size_t len, int *out_prot,
 				NULL);
 		up_write(&mm->mmap_sem);
 		if (nr_pages != pinned_pages->nr_pages) {
+			if (pinned_pages->nr_pages < 0)
+				pinned_pages->nr_pages = 0;
 			if (try_upgrade) {
 				if (ulimit)
 					__scif_dec_pinned_vm_lock(mm,

@@ -1424,7 +1426,6 @@ int __scif_pin_pages(void *addr, size_t len, int *out_prot,
 
 	if (pinned_pages->nr_pages < nr_pages) {
 		err = -EFAULT;
-		pinned_pages->nr_pages = nr_pages;
 		goto dec_pinned;
 	}

@@ -1437,7 +1438,6 @@ int __scif_pin_pages(void *addr, size_t len, int *out_prot,
 		__scif_dec_pinned_vm_lock(mm, nr_pages, 0);
 	/* Something went wrong! Rollback */
 error_unmap:
-	pinned_pages->nr_pages = nr_pages;
 	scif_destroy_pinned_pages(pinned_pages);
 	*pages = NULL;
 	dev_dbg(scif_info.mdev.this_device,

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 18:18 UTC #68 lore raw

PATCH 68/191 ALSA: seq: oss: Avoid mutex lock for a long-time ioctl

From: Takashi Iwai <[email protected]>

[ Upstream commit 2759caad2600d503c3b0ed800e7e03d2cd7a4c05 ]

Recently we applied a fix to cover the whole OSS sequencer ioctls with the mutex for dealing with the possible races. This works fine in general, but in theory, this may lead to unexpectedly long stall if an ioctl like SNDCTL_SEQ_SYNC is issued and an event with the far future timestamp was queued.

For fixing such a potential stall, this patch changes the mutex lock applied conditionally excluding such an ioctl command. Also, change the mutex_lock() with the interruptible version for user to allow escaping from the big-hammer mutex.

Fixes 80982c7e834e ("ALSA: seq: oss: Serialize ioctls")

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Takashi Iwai <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 sound/core/seq/oss/seq_oss.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

sound/core/seq/oss/seq_oss.c +5 -2

index 4b78979599131..ade880fe24a41 100644
@@ -187,9 +187,12 @@ odev_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 	if (snd_BUG_ON(!dp))
 		return -ENXIO;
 
-	mutex_lock(&register_mutex);
+	if (cmd != SNDCTL_SEQ_SYNC &&
+	    mutex_lock_interruptible(&register_mutex))
+		return -ERESTARTSYS;
 	rc = snd_seq_oss_ioctl(dp, cmd, arg);
-	mutex_unlock(&register_mutex);
+	if (cmd != SNDCTL_SEQ_SYNC)
+		mutex_unlock(&register_mutex);
 	return rc;
 }

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 18:16 UTC #69 lore raw

PATCH 69/191 usb: dwc2: Fix parameter type in function pointer prototype

Link https://github.com/ClangBuiltLinux/linux/issues/1107

From: Nathan Chancellor <[email protected]>

[ Upstream commit 362b9398c962c9ec563653444e15ef9032ef3a90 ]

When booting up on a Raspberry Pi 4 with Control Flow Integrity checking enabled, the following warning/panic happens:

[    1.626435] CFI failure (target: dwc2_set_bcm_params+0x0/0x4):
[    1.632408] WARNING: CPU: 0 PID: 32 at kernel/cfi.c:30 __cfi_check_fail+0x54/0x5c
[    1.640021] Modules linked in:
[    1.643137] CPU: 0 PID: 32 Comm: kworker/0:1 Not tainted 5.8.0-rc6-next-20200724-00051-g89ba619726de #1
[    1.652693] Hardware name: Raspberry Pi 4 Model B Rev 1.2 (DT)
[    1.658637] Workqueue: events deferred_probe_work_func
[    1.663870] pstate: 60000005 (nZCv daif -PAN -UAO BTYPE=--)
[    1.669542] pc : __cfi_check_fail+0x54/0x5c
[    1.673798] lr : __cfi_check_fail+0x54/0x5c
[    1.678050] sp : ffff8000102bbaa0
[    1.681419] x29: ffff8000102bbaa0 x28: ffffab09e21c7000
[    1.686829] x27: 0000000000000402 x26: ffff0000f6e7c228
[    1.692238] x25: 00000000fb7cdb0d x24: 0000000000000005
[    1.697647] x23: ffffab09e2515000 x22: ffffab09e069a000
[    1.703055] x21: 4c550309df1cf4c1 x20: ffffab09e2433c60
[    1.708462] x19: ffffab09e160dc50 x18: ffff0000f6e8cc78
[    1.713870] x17: 0000000000000041 x16: ffffab09e0bce6f8
[    1.719278] x15: ffffab09e1c819b7 x14: 0000000000000003
[    1.724686] x13: 00000000ffffefff x12: 0000000000000000
[    1.730094] x11: 0000000000000000 x10: 00000000ffffffff
[    1.735501] x9 : c932f7abfc4bc600 x8 : c932f7abfc4bc600
[    1.740910] x7 : 077207610770075f x6 : ffff0000f6c38f00
[    1.746317] x5 : 0000000000000000 x4 : 0000000000000000
[    1.751723] x3 : 0000000000000000 x2 : 0000000000000000
[    1.757129] x1 : ffff8000102bb7d8 x0 : 0000000000000032
[    1.762539] Call trace:
[    1.765030]  __cfi_check_fail+0x54/0x5c
[    1.768938]  __cfi_check+0x5fa6c/0x66afc
[    1.772932]  dwc2_init_params+0xd74/0xd78
[    1.777012]  dwc2_driver_probe+0x484/0x6ec
[    1.781180]  platform_drv_probe+0xb4/0x100
[    1.785350]  really_probe+0x228/0x63c
[    1.789076]  driver_probe_device+0x80/0xc0
[    1.793247]  __device_attach_driver+0x114/0x160
[    1.797857]  bus_for_each_drv+0xa8/0x128
[    1.801851]  __device_attach.llvm.14901095709067289134+0xc0/0x170
[    1.808050]  bus_probe_device+0x44/0x100
[    1.812044]  deferred_probe_work_func+0x78/0xb8
[    1.816656]  process_one_work+0x204/0x3c4
[    1.820736]  worker_thread+0x2f0/0x4c4
[    1.824552]  kthread+0x174/0x184
[    1.827837]  ret_from_fork+0x10/0x18

CFI validates that all indirect calls go to a function with the same exact function pointer prototype. In this case, dwc2_set_bcm_params is the target, which has a parameter of type 'struct dwc2_hsotg *', but it is being implicitly cast to have a parameter of type 'void *' because that is the set_params function pointer prototype. Make the function pointer protoype match the definitions so that there is no more violation.

Fixes 7de1debcd2de ("usb: dwc2: Remove platform static params")

Signed-off-by Nathan Chancellor <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/usb/dwc2/params.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

drivers/usb/dwc2/params.c +1 -1

index a3ffe97170ffd..cf6ff8bfd7f61 100644
@@ -711,7 +711,7 @@ int dwc2_get_hwparams(struct dwc2_hsotg *hsotg)
 int dwc2_init_params(struct dwc2_hsotg *hsotg)
 {
 	const struct of_device_id *match;
-	void (*set_params)(void *data);
+	void (*set_params)(struct dwc2_hsotg *data);
 
 	dwc2_set_default_params(hsotg);
 	dwc2_get_device_properties(hsotg);

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 14:12 UTC #70 lore raw

PATCH 70/191 quota: clear padding in v2r1_mem2diskdqb()

From: Eric Dumazet <[email protected]>

[ Upstream commit 3d3dc274ce736227e3197868ff749cff2f175f63 ]

Freshly allocated memory contains garbage, better make sure to init all struct v2r1_disk_dqblk fields to avoid KMSAN report:

BUG: KMSAN: uninit-value in qtree_entry_unused+0x137/0x1b0 fs/quota/quota_tree.c:218
CPU: 0 PID: 23373 Comm: syz-executor.1 Not tainted 5.9.0-rc4-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x21c/0x280 lib/dump_stack.c:118
 kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:122
 __msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:219
 qtree_entry_unused+0x137/0x1b0 fs/quota/quota_tree.c:218
 v2r1_mem2diskdqb+0x43d/0x710 fs/quota/quota_v2.c:285
 qtree_write_dquot+0x226/0x870 fs/quota/quota_tree.c:394
 v2_write_dquot+0x1ad/0x280 fs/quota/quota_v2.c:333
 dquot_commit+0x4af/0x600 fs/quota/dquot.c:482
 ext4_write_dquot fs/ext4/super.c:5934 [inline]
 ext4_mark_dquot_dirty+0x4d8/0x6a0 fs/ext4/super.c:5985
 mark_dquot_dirty fs/quota/dquot.c:347 [inline]
 mark_all_dquot_dirty fs/quota/dquot.c:385 [inline]
 dquot_alloc_inode+0xc05/0x12b0 fs/quota/dquot.c:1755
 __ext4_new_inode+0x8204/0x9d70 fs/ext4/ialloc.c:1155
 ext4_tmpfile+0x41a/0x850 fs/ext4/namei.c:2686
 vfs_tmpfile+0x2a2/0x570 fs/namei.c:3283
 do_tmpfile fs/namei.c:3316 [inline]
 path_openat+0x4035/0x6a90 fs/namei.c:3359
 do_filp_open+0x2b8/0x710 fs/namei.c:3395
 do_sys_openat2+0xa88/0x1140 fs/open.c:1168
 do_sys_open fs/open.c:1184 [inline]
 __do_compat_sys_openat fs/open.c:1242 [inline]
 __se_compat_sys_openat+0x2a4/0x310 fs/open.c:1240
 __ia32_compat_sys_openat+0x56/0x70 fs/open.c:1240
 do_syscall_32_irqs_on arch/x86/entry/common.c:80 [inline]
 __do_fast_syscall_32+0x129/0x180 arch/x86/entry/common.c:139
 do_fast_syscall_32+0x6a/0xc0 arch/x86/entry/common.c:162
 do_SYSENTER_32+0x73/0x90 arch/x86/entry/common.c:205
 entry_SYSENTER_compat_after_hwframe+0x4d/0x5c
RIP: 0023:0xf7ff4549
Code: b8 01 10 06 03 74 b4 01 10 07 03 74 b0 01 10 08 03 74 d8 01 00 00 00 00 00 00 00 00 00 00 00 00 00 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59 c3 90 90 90 90 eb 0d 90 90 90 90 90 90 90 90 90 90 90 90
RSP: 002b:00000000f55cd0cc EFLAGS: 00000296 ORIG_RAX: 0000000000000127
RAX: ffffffffffffffda RBX: 00000000ffffff9c RCX: 0000000020000000
RDX: 0000000000410481 RSI: 0000000000000000 RDI: 0000000000000000
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000

Uninit was created at:

 kmsan_save_stack_with_flags mm/kmsan/kmsan.c:143 [inline]
 kmsan_internal_poison_shadow+0x66/0xd0 mm/kmsan/kmsan.c:126
 kmsan_slab_alloc+0x8a/0xe0 mm/kmsan/kmsan_hooks.c:80
 slab_alloc_node mm/slub.c:2907 [inline]
 slab_alloc mm/slub.c:2916 [inline]
 __kmalloc+0x2bb/0x4b0 mm/slub.c:3982
 kmalloc include/linux/slab.h:559 [inline]
 getdqbuf+0x56/0x150 fs/quota/quota_tree.c:52
 qtree_write_dquot+0xf2/0x870 fs/quota/quota_tree.c:378
 v2_write_dquot+0x1ad/0x280 fs/quota/quota_v2.c:333
 dquot_commit+0x4af/0x600 fs/quota/dquot.c:482
 ext4_write_dquot fs/ext4/super.c:5934 [inline]
 ext4_mark_dquot_dirty+0x4d8/0x6a0 fs/ext4/super.c:5985
 mark_dquot_dirty fs/quota/dquot.c:347 [inline]
 mark_all_dquot_dirty fs/quota/dquot.c:385 [inline]
 dquot_alloc_inode+0xc05/0x12b0 fs/quota/dquot.c:1755
 __ext4_new_inode+0x8204/0x9d70 fs/ext4/ialloc.c:1155
 ext4_tmpfile+0x41a/0x850 fs/ext4/namei.c:2686
 vfs_tmpfile+0x2a2/0x570 fs/namei.c:3283
 do_tmpfile fs/namei.c:3316 [inline]
 path_openat+0x4035/0x6a90 fs/namei.c:3359
 do_filp_open+0x2b8/0x710 fs/namei.c:3395
 do_sys_openat2+0xa88/0x1140 fs/open.c:1168
 do_sys_open fs/open.c:1184 [inline]
 __do_compat_sys_openat fs/open.c:1242 [inline]
 __se_compat_sys_openat+0x2a4/0x310 fs/open.c:1240
 __ia32_compat_sys_openat+0x56/0x70 fs/open.c:1240
 do_syscall_32_irqs_on arch/x86/entry/common.c:80 [inline]
 __do_fast_syscall_32+0x129/0x180 arch/x86/entry/common.c:139
 do_fast_syscall_32+0x6a/0xc0 arch/x86/entry/common.c:162
 do_SYSENTER_32+0x73/0x90 arch/x86/entry/common.c:205
 entry_SYSENTER_compat_after_hwframe+0x4d/0x5c

Fixes 498c60153ebb ("quota: Implement quota format with 64-bit space and inode limits")

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Eric Dumazet <[email protected]>

Cc Jan Kara <[email protected]>

Signed-off-by Jan Kara <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 fs/quota/quota_v2.c | 1 +
 1 file changed, 1 insertion(+)

fs/quota/quota_v2.c +1 -0

index a73e5b34db418..5d4dc0f84f202 100644
@@ -283,6 +283,7 @@ static void v2r1_mem2diskdqb(void *dp, struct dquot *dquot)
 	d->dqb_curspace = cpu_to_le64(m->dqb_curspace);
 	d->dqb_btime = cpu_to_le64(m->dqb_btime);
 	d->dqb_id = cpu_to_le32(from_kqid(&init_user_ns, dquot->dq_id));
+	d->dqb_pad = 0;
 	if (qtree_entry_unused(info, dp))
 		d->dqb_itime = cpu_to_le64(1);
 }

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 14:12 UTC #71 lore raw

PATCH 71/191 HID: hid-input: fix stylus battery reporting

From: Dmitry Torokhov <[email protected]>

[ Upstream commit 505f394fa239cecb76d916aa858f87ed7ea7fde4 ]

With commit 4f3882177240 hid-input started clearing of "ignored" usages to avoid using garbage that might have been left in them. However "battery strength" usages should not be ignored, as we do want to use them.

Fixes 4f3882177240 ("HID: hid-input: clear unmapped usages")

Reported-by Kenneth Albanowski <[email protected]>

Tested-by Kenneth Albanowski <[email protected]>

Signed-off-by Jiri Kosina <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/hid/hid-input.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

drivers/hid/hid-input.c +2 -2

index 3624d6e3384ff..07a043ae69f12 100644
@@ -796,7 +796,7 @@ static void hidinput_configure_usage(struct hid_input *hidinput, struct hid_fiel
 		case 0x3b: /* Battery Strength */
 			hidinput_setup_battery(device, HID_INPUT_REPORT, field);
 			usage->type = EV_PWR;
-			goto ignore;
+			return;
 
 		case 0x3c: /* Invert */
 			map_key_clear(BTN_TOOL_RUBBER);

@@ -1043,7 +1043,7 @@ static void hidinput_configure_usage(struct hid_input *hidinput, struct hid_fiel
 		case HID_DC_BATTERYSTRENGTH:
 			hidinput_setup_battery(device, HID_INPUT_REPORT, field);
 			usage->type = EV_PWR;
-			goto ignore;
+			return;
 		}
 		goto unknown;

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 14:12 UTC #72 lore raw

PATCH 72/191 qtnfmac: fix resource leaks on unsupported iftype error return path

From: Colin Ian King <[email protected]>

[ Upstream commit 63f6982075d890d7563e2469643f05a37d193f01 ]

Currently if an unsupported iftype is detected the error return path does not free the cmd_skb leading to a resource leak. Fix this by free'ing cmd_skb.

Addresses-Coverity: ("Resource leak")

Fixes 805b28c05c8e ("qtnfmac: prepare for AP_VLAN interface type support")

Signed-off-by Colin Ian King <[email protected]>

Signed-off-by Kalle Valo <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/net/wireless/quantenna/qtnfmac/commands.c | 2 ++
 1 file changed, 2 insertions(+)

drivers/net/wireless/quantenna/qtnfmac/commands.c +2 -0

index ed087bbc6f631..f37fda2238acc 100644
@@ -796,6 +796,7 @@ int qtnf_cmd_send_del_intf(struct qtnf_vif *vif)
 	default:
 		pr_warn("VIF%u.%u: unsupported iftype %d\n", vif->mac->macid,
 			vif->vifid, vif->wdev.iftype);
+		dev_kfree_skb(cmd_skb);
 		ret = -EINVAL;
 		goto out;
 	}

@@ -1882,6 +1883,7 @@ int qtnf_cmd_send_change_sta(struct qtnf_vif *vif, const u8 *mac,
 		break;
 	default:
 		pr_err("unsupported iftype %d\n", vif->wdev.iftype);
+		dev_kfree_skb(cmd_skb);
 		ret = -EINVAL;
 		goto out;
 	}

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 14:16 UTC #73 lore raw

PATCH 73/191 net: enic: Cure the enic api locking trainwreck

From: Thomas Gleixner <[email protected]>

[ Upstream commit a53b59ece86c86d16d12ccdaa1ad0c78250a9d96 ]

enic_dev_wait() has a BUG_ON(in_interrupt()).

Chasing the callers of enic_dev_wait() revealed the gems of enic_reset() and enic_tx_hang_reset() which are both invoked through work queues in order to be able to call rtnl_lock(). So far so good.

After locking rtnl both functions acquire enic::enic_api_lock which serializes against the (ab)use from infiniband. This is where the trainwreck starts.

enic::enic_api_lock is a spin_lock() which implicitly disables preemption, but both functions invoke a ton of functions under that lock which can sleep. The BUG_ON(in_interrupt()) does not trigger in that case because it can't detect the preempt disabled condition.

This clearly has never been tested with any of the mandatory debug options for 7+ years, which would have caught that for sure.

Cure it by adding a enic_api_busy member to struct enic, which is modified and evaluated with enic::enic_api_lock held.

If enic_api_devcmd_proxy_by_index() observes enic::enic_api_busy as true, it drops enic::enic_api_lock and busy waits for enic::enic_api_busy to become false.

It would be smarter to wait for a completion of that busy period, but enic_api_devcmd_proxy_by_index() is called with other spin locks held which obviously can't sleep.

Remove the BUG_ON(in_interrupt()) check as well because it's incomplete and with proper debugging enabled the problem would have been caught from the debug checks in schedule_timeout().

Fixes 0b038566c0ea ("drivers/net: enic: Add an interface for USNIC to interact with firmware")

Signed-off-by Thomas Gleixner <[email protected]>

Signed-off-by David S. Miller <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/net/ethernet/cisco/enic/enic.h      |  1 +
 drivers/net/ethernet/cisco/enic/enic_api.c  |  6 +++++
 drivers/net/ethernet/cisco/enic/enic_main.c | 27 ++++++++++++++++-----
 3 files changed, 28 insertions(+), 6 deletions(-)

drivers/net/ethernet/cisco/enic/enic.h +1 -0

index ba032ac9ae86c..893c51a94abbd 100644
@@ -168,6 +168,7 @@ struct enic {
 	u16 num_vfs;
 #endif
 	spinlock_t enic_api_lock;
+	bool enic_api_busy;
 	struct enic_port_profile *pp;
 
 	/* work queue cache line section */

drivers/net/ethernet/cisco/enic/enic_api.c +6 -0

index b161f24522b87..b028ea2dec2b9 100644
@@ -34,6 +34,12 @@ int enic_api_devcmd_proxy_by_index(struct net_device *netdev, int vf,
 	struct vnic_dev *vdev = enic->vdev;
 
 	spin_lock(&enic->enic_api_lock);
+	while (enic->enic_api_busy) {
+		spin_unlock(&enic->enic_api_lock);
+		cpu_relax();
+		spin_lock(&enic->enic_api_lock);
+	}
+
 	spin_lock_bh(&enic->devcmd_lock);
 
 	vnic_dev_cmd_proxy_by_index_start(vdev, vf);

drivers/net/ethernet/cisco/enic/enic_main.c +21 -6

index 52a3b32390a9c..f0bbc0fdeddcb 100644
@@ -2101,8 +2101,6 @@ static int enic_dev_wait(struct vnic_dev *vdev,
 	int done;
 	int err;
 
-	BUG_ON(in_interrupt());
-
 	err = start(vdev, arg);
 	if (err)
 		return err;

@@ -2279,6 +2277,13 @@ static int enic_set_rss_nic_cfg(struct enic *enic)
 		rss_hash_bits, rss_base_cpu, rss_enable);
 }
 
+static void enic_set_api_busy(struct enic *enic, bool busy)
+{
+	spin_lock(&enic->enic_api_lock);
+	enic->enic_api_busy = busy;
+	spin_unlock(&enic->enic_api_lock);
+}
+
 static void enic_reset(struct work_struct *work)
 {
 	struct enic *enic = container_of(work, struct enic, reset);

@@ -2288,7 +2293,9 @@ static void enic_reset(struct work_struct *work)
 
 	rtnl_lock();
 
-	spin_lock(&enic->enic_api_lock);
+	/* Stop any activity from infiniband */
+	enic_set_api_busy(enic, true);
+
 	enic_stop(enic->netdev);
 	enic_dev_soft_reset(enic);
 	enic_reset_addr_lists(enic);

@@ -2296,7 +2303,10 @@ static void enic_reset(struct work_struct *work)
 	enic_set_rss_nic_cfg(enic);
 	enic_dev_set_ig_vlan_rewrite_mode(enic);
 	enic_open(enic->netdev);
-	spin_unlock(&enic->enic_api_lock);
+
+	/* Allow infiniband to fiddle with the device again */
+	enic_set_api_busy(enic, false);
+
 	call_netdevice_notifiers(NETDEV_REBOOT, enic->netdev);
 
 	rtnl_unlock();

@@ -2308,7 +2318,9 @@ static void enic_tx_hang_reset(struct work_struct *work)
 
 	rtnl_lock();
 
-	spin_lock(&enic->enic_api_lock);
+	/* Stop any activity from infiniband */
+	enic_set_api_busy(enic, true);
+
 	enic_dev_hang_notify(enic);
 	enic_stop(enic->netdev);
 	enic_dev_hang_reset(enic);

@@ -2317,7 +2329,10 @@ static void enic_tx_hang_reset(struct work_struct *work)
 	enic_set_rss_nic_cfg(enic);
 	enic_dev_set_ig_vlan_rewrite_mode(enic);
 	enic_open(enic->netdev);
-	spin_unlock(&enic->enic_api_lock);
+
+	/* Allow infiniband to fiddle with the device again */
+	enic_set_api_busy(enic, false);
+
 	call_netdevice_notifiers(NETDEV_REBOOT, enic->netdev);
 
 	rtnl_unlock();

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 14:12 UTC #74 lore raw

PATCH 74/191 mfd: sm501: Fix leaks in probe()

From: Dan Carpenter <[email protected]>

[ Upstream commit 8ce24f8967df2836b4557a23e74dc4bb098249f1 ]

This code should clean up if sm501_init_dev() fails.

Fixes b6d6454fdb66 ("[PATCH] mfd: SM501 core driver")

Signed-off-by Lee Jones <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/mfd/sm501.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

drivers/mfd/sm501.c +7 -1

index 3270b8dbc9498..4ca245518a199 100644
@@ -1425,8 +1425,14 @@ static int sm501_plat_probe(struct platform_device *dev)
 		goto err_claim;
 	}
 
-	return sm501_init_dev(sm);
+	ret = sm501_init_dev(sm);
+	if (ret)
+		goto err_unmap;
+
+	return 0;
 
+ err_unmap:
+	iounmap(sm->regs);
  err_claim:
 	release_resource(sm->regs_claim);
 	kfree(sm->regs_claim);

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 18:15 UTC #75 lore raw

PATCH 75/191 iwlwifi: mvm: split a print to avoid a WARNING in ROC

Link https://lore.kernel.org/r/iwlwifi.20200930102759.58d57c0bdc68.Ib06008665e7bf1199c360aa92691d9c74fb84990@changeid open here

From: Emmanuel Grumbach <[email protected]>

[ Upstream commit 903b3f9badf1d54f77b468b96706dab679b45b14 ]

A print in the remain on channel code was too long and caused a WARNING, split it.

Signed-off-by Emmanuel Grumbach <[email protected]>

Fixes dc28e12f2125 ("iwlwifi: mvm: ROC: Extend the ROC max delay duration & limit ROC duration")

Signed-off-by Luca Coelho <[email protected]>

Signed-off-by Luca Coelho <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c +6 -3

index b86c7a36d3f17..ec2ecdd1cc4ec 100644
@@ -3198,9 +3198,12 @@ static int iwl_mvm_send_aux_roc_cmd(struct iwl_mvm *mvm,
 	aux_roc_req.apply_time_max_delay = cpu_to_le32(delay);
 
 	IWL_DEBUG_TE(mvm,
-		     "ROC: Requesting to remain on channel %u for %ums (requested = %ums, max_delay = %ums, dtim_interval = %ums)\n",
-		     channel->hw_value, req_dur, duration, delay,
-		     dtim_interval);
+		     "ROC: Requesting to remain on channel %u for %ums\n",
+		     channel->hw_value, req_dur);
+	IWL_DEBUG_TE(mvm,
+		     "\t(requested = %ums, max_delay = %ums, dtim_interval = %ums)\n",
+		     duration, delay, dtim_interval);
+
 	/* Set the node address */
 	memcpy(aux_roc_req.node_addr, vif->addr, ETH_ALEN);

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 18:15 UTC #76 lore raw

PATCH 76/191 usb: gadget: f_ncm: fix ncm_bitrate for SuperSpeed and above.

From: Lorenzo Colitti <[email protected]>

[ Upstream commit 986499b1569af980a819817f17238015b27793f6 ]

Currently, SuperSpeed NCM gadgets report a speed of 851 Mbps in USB_CDC_NOTIFY_SPEED_CHANGE. But the calculation appears to assume 16 packets per microframe, and USB 3 and above no longer use microframes.

Maximum speed is actually much higher. On a direct connection, theoretical throughput is at most 3.86 Gbps for gen1x1 and 9.36 Gbps for gen2x1, and I have seen gadget->host iperf throughput of >2 Gbps for gen1x1 and >4 Gbps for gen2x1.

Unfortunately the ConnectionSpeedChange defined in the CDC spec only uses 32-bit values, so we can't report accurate numbers for 10Gbps and above. So, report 3.75Gbps for SuperSpeed (which is roughly maximum theoretical performance) and 4.25Gbps for SuperSpeed Plus (which is close to the maximum that we can report in a 32-bit unsigned integer).

This results in:

[50879.191272] cdc_ncm 2-2:1.0 enx228b127e050c: renamed from usb0
[50879.234778] cdc_ncm 2-2:1.0 enx228b127e050c: 3750 mbit/s downlink 3750 mbit/s uplink

on SuperSpeed and:

[50798.434527] cdc_ncm 8-2:1.0 enx228b127e050c: renamed from usb0
[50798.524278] cdc_ncm 8-2:1.0 enx228b127e050c: 4250 mbit/s downlink 4250 mbit/s uplink

on SuperSpeed Plus.

Fixes 1650113888fe ("usb: gadget: f_ncm: add SuperSpeed descriptors for CDC NCM")

Reviewed-by Maciej Żenczykowski <[email protected]>

Signed-off-by Lorenzo Colitti <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/usb/gadget/function/f_ncm.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

drivers/usb/gadget/function/f_ncm.c +4 -2

index f62cdf1238d77..fbf15ab700f49 100644
@@ -92,8 +92,10 @@ static inline struct f_ncm *func_to_ncm(struct usb_function *f)
 /* peak (theoretical) bulk transfer rate in bits-per-second */
 static inline unsigned ncm_bitrate(struct usb_gadget *g)
 {
-	if (gadget_is_superspeed(g) && g->speed == USB_SPEED_SUPER)
-		return 13 * 1024 * 8 * 1000 * 8;
+	if (gadget_is_superspeed(g) && g->speed >= USB_SPEED_SUPER_PLUS)
+		return 4250000000U;
+	else if (gadget_is_superspeed(g) && g->speed == USB_SPEED_SUPER)
+		return 3750000000U;
 	else if (gadget_is_dualspeed(g) && g->speed == USB_SPEED_HIGH)
 		return 13 * 512 * 8 * 1000 * 8;
 	else

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 18:17 UTC #77 lore raw

PATCH 77/191 usb: gadget: u_ether: enable qmult on SuperSpeed Plus as well

From: Lorenzo Colitti <[email protected]>

[ Upstream commit 4eea21dc67b0c6ba15ae41b1defa113a680a858e ]

The u_ether driver has a qmult setting that multiplies the transmit queue length (which by default is 2).

The intent is that it should be enabled at high/super speed, but because the code does not explicitly check for USB_SUPER_PLUS, it is disabled at that speed.

Fix this by ensuring that the queue multiplier is enabled for any wired link at high speed or above. Using >= for USB_SPEED_* constants seems correct because it is what the gadget_is_xxxspeed functions do.

The queue multiplier substantially helps performance at higher speeds. On a direct SuperSpeed Plus link to a Linux laptop, iperf3 single TCP stream:

Before (qmult=1): 1.3 Gbps
After (qmult=5): 3.2 Gbps

Fixes 04617db7aa68 ("usb: gadget: add SS descriptors to Ethernet gadget")

Reviewed-by Maciej Żenczykowski <[email protected]>

Signed-off-by Lorenzo Colitti <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/usb/gadget/function/u_ether.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

drivers/usb/gadget/function/u_ether.c +1 -1

index 81d84e0c3c6cd..716edd593a994 100644
@@ -97,7 +97,7 @@ struct eth_dev {
 static inline int qlen(struct usb_gadget *gadget, unsigned qmult)
 {
 	if (gadget_is_dualspeed(gadget) && (gadget->speed == USB_SPEED_HIGH ||
-					    gadget->speed == USB_SPEED_SUPER))
+					    gadget->speed >= USB_SPEED_SUPER))
 		return qmult * DEFAULT_QLEN;
 	else
 		return DEFAULT_QLEN;

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 18:17 UTC #78 lore raw

PATCH 78/191 nl80211: fix non-split wiphy information

Link https://lore.kernel.org/r/20200928130717.3e6d9c6bada2.Ie0f151a8d0d00a8e1e18f6a8c9244dd02496af67@changeid open here

From: Johannes Berg <[email protected]>

[ Upstream commit ab10c22bc3b2024f0c9eafa463899a071eac8d97 ]

When dumping wiphy information, we try to split the data into many submessages, but for old userspace we still support the old mode where this doesn't happen.

However, in this case we were not resetting our state correctly and dumping multiple messages for each wiphy, which would have broken such older userspace.

This was broken pretty much immediately afterwards because it only worked in the original commit where non-split dumps didn't have any more data than split dumps...

Fixes fe1abafd942f ("nl80211: re-add channel width and extended capa advertising")

Signed-off-by Johannes Berg <[email protected]>

Signed-off-by Johannes Berg <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 net/wireless/nl80211.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

net/wireless/nl80211.c +4 -1

index bf3caa376f9fe..6bd4f6c8fc2ef 100644
@@ -1784,7 +1784,10 @@ static int nl80211_send_wiphy(struct cfg80211_registered_device *rdev,
 		 * case we'll continue with more data in the next round,
 		 * but break unconditionally so unsplit data stops here.
 		 */
-		state->split_start++;
+		if (state->split)
+			state->split_start++;
+		else
+			state->split_start = 0;
 		break;
 	case 9:
 		if (rdev->wiphy.extended_capabilities &&

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 18:17 UTC #79 lore raw

PATCH 79/191 usb: dwc2: Fix INTR OUT transfers in DDMA mode.

From: Minas Harutyunyan <[email protected]>

[ Upstream commit b2c586eb07efab982419f32b7c3bd96829bc8bcd ]

In DDMA mode if INTR OUT transfers mps not multiple of 4 then single packet corresponds to single descriptor.

Descriptor limit set to mps and desc chain limit set to mps * MAX_DMA_DESC_NUM_GENERIC. On that descriptors complete, to calculate transfer size should be considered correction value for each descriptor.

In start request function, if "continue" is true then dma buffer address should be incremmented by offset for all type of transfers, not only for Control DATA_OUT transfers.

Fixes cf77b5fb9b394 ("usb: dwc2: gadget: Transfer length limit checking for DDMA")

Fixes e02f9aa6119e0 ("usb: dwc2: gadget: EP 0 specific DDMA programming")

Fixes aa3e8bc81311e ("usb: dwc2: gadget: DDMA transfer start and complete")

Signed-off-by Minas Harutyunyan <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/usb/dwc2/gadget.c | 40 ++++++++++++++++++++++++++++++++-------
 1 file changed, 33 insertions(+), 7 deletions(-)

drivers/usb/dwc2/gadget.c +33 -7

index 03bc479d04e0d..d2d4067a1a5f4 100644
@@ -704,8 +704,11 @@ static u32 dwc2_hsotg_read_frameno(struct dwc2_hsotg *hsotg)
  */
 static unsigned int dwc2_gadget_get_chain_limit(struct dwc2_hsotg_ep *hs_ep)
 {
+	const struct usb_endpoint_descriptor *ep_desc = hs_ep->ep.desc;
 	int is_isoc = hs_ep->isochronous;
 	unsigned int maxsize;
+	u32 mps = hs_ep->ep.maxpacket;
+	int dir_in = hs_ep->dir_in;
 
 	if (is_isoc)
 		maxsize = hs_ep->dir_in ? DEV_DMA_ISOC_TX_NBYTES_LIMIT :

@@ -716,6 +719,11 @@ static unsigned int dwc2_gadget_get_chain_limit(struct dwc2_hsotg_ep *hs_ep)
 	/* Above size of one descriptor was chosen, multiple it */
 	maxsize *= MAX_DMA_DESC_NUM_GENERIC;
 
+	/* Interrupt OUT EP with mps not multiple of 4 */
+	if (hs_ep->index)
+		if (usb_endpoint_xfer_int(ep_desc) && !dir_in && (mps % 4))
+			maxsize = mps * MAX_DMA_DESC_NUM_GENERIC;
+
 	return maxsize;
 }

@@ -731,11 +739,14 @@ static unsigned int dwc2_gadget_get_chain_limit(struct dwc2_hsotg_ep *hs_ep)
  * Isochronous - descriptor rx/tx bytes bitfield limit,
  * Control In/Bulk/Interrupt - multiple of mps. This will allow to not
  * have concatenations from various descriptors within one packet.
+ * Interrupt OUT - if mps not multiple of 4 then a single packet corresponds
+ * to a single descriptor.
  *
  * Selects corresponding mask for RX/TX bytes as well.
  */
 static u32 dwc2_gadget_get_desc_params(struct dwc2_hsotg_ep *hs_ep, u32 *mask)
 {
+	const struct usb_endpoint_descriptor *ep_desc = hs_ep->ep.desc;
 	u32 mps = hs_ep->ep.maxpacket;
 	int dir_in = hs_ep->dir_in;
 	u32 desc_size = 0;

@@ -759,6 +770,13 @@ static u32 dwc2_gadget_get_desc_params(struct dwc2_hsotg_ep *hs_ep, u32 *mask)
 		desc_size -= desc_size % mps;
 	}
 
+	/* Interrupt OUT EP with mps not multiple of 4 */
+	if (hs_ep->index)
+		if (usb_endpoint_xfer_int(ep_desc) && !dir_in && (mps % 4)) {
+			desc_size = mps;
+			*mask = DEV_DMA_NBYTES_MASK;
+		}
+
 	return desc_size;
 }

@@ -1094,13 +1112,7 @@ static void dwc2_hsotg_start_req(struct dwc2_hsotg *hsotg,
 				length += (mps - (length % mps));
 		}
 
-		/*
-		 * If more data to send, adjust DMA for EP0 out data stage.
-		 * ureq->dma stays unchanged, hence increment it by already
-		 * passed passed data count before starting new transaction.
-		 */
-		if (!index && hsotg->ep0_state == DWC2_EP0_DATA_OUT &&
-		    continuing)
+		if (continuing)
 			offset = ureq->actual;
 
 		/* Fill DDMA chain entries */

@@ -2260,22 +2272,36 @@ static void dwc2_hsotg_change_ep_iso_parity(struct dwc2_hsotg *hsotg,
  */
 static unsigned int dwc2_gadget_get_xfersize_ddma(struct dwc2_hsotg_ep *hs_ep)
 {
+	const struct usb_endpoint_descriptor *ep_desc = hs_ep->ep.desc;
 	struct dwc2_hsotg *hsotg = hs_ep->parent;
 	unsigned int bytes_rem = 0;
+	unsigned int bytes_rem_correction = 0;
 	struct dwc2_dma_desc *desc = hs_ep->desc_list;
 	int i;
 	u32 status;
+	u32 mps = hs_ep->ep.maxpacket;
+	int dir_in = hs_ep->dir_in;
 
 	if (!desc)
 		return -EINVAL;
 
+	/* Interrupt OUT EP with mps not multiple of 4 */
+	if (hs_ep->index)
+		if (usb_endpoint_xfer_int(ep_desc) && !dir_in && (mps % 4))
+			bytes_rem_correction = 4 - (mps % 4);
+
 	for (i = 0; i < hs_ep->desc_count; ++i) {
 		status = desc->status;
 		bytes_rem += status & DEV_DMA_NBYTES_MASK;
+		bytes_rem -= bytes_rem_correction;
 
 		if (status & DEV_DMA_STS_MASK)
 			dev_err(hsotg->dev, "descriptor %d closed with %x\n",
 				i, status & DEV_DMA_STS_MASK);
+
+		if (status & DEV_DMA_L)
+			break;
+
 		desc++;
 	}

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 18:17 UTC #80 lore raw

PATCH 80/191 scsi: be2iscsi: Fix a theoretical leak in beiscsi_create_eqs()

Link https://lore.kernel.org/r/20200928091300.GD377727@mwanda open here

From: Dan Carpenter <[email protected]>

[ Upstream commit 38b2db564d9ab7797192ef15d7aade30633ceeae ]

The be_fill_queue() function can only fail when "eq_vaddress" is NULL and since it's non-NULL here that means the function call can't fail. But imagine if it could, then in that situation we would want to store the "paddr" so that dma memory can be released.

Fixes bfead3b2cb46 ("[SCSI] be2iscsi: Adding msix and mcc_rings V3")

Signed-off-by Martin K. Petersen <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/scsi/be2iscsi/be_main.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

drivers/scsi/be2iscsi/be_main.c +2 -2

index b4542e7e2ad5b..86e1eac3a4703 100644
@@ -3013,6 +3013,7 @@ static int beiscsi_create_eqs(struct beiscsi_hba *phba,
 			goto create_eq_error;
 		}
 
+		mem->dma = paddr;
 		mem->va = eq_vaddress;
 		ret = be_fill_queue(eq, phba->params.num_eq_entries,
 				    sizeof(struct be_eq_entry), eq_vaddress);

@@ -3022,7 +3023,6 @@ static int beiscsi_create_eqs(struct beiscsi_hba *phba,
 			goto create_eq_error;
 		}
 
-		mem->dma = paddr;
 		ret = beiscsi_cmd_eq_create(&phba->ctrl, eq,
 					    phwi_context->cur_eqd);
 		if (ret) {

@@ -3079,6 +3079,7 @@ static int beiscsi_create_cqs(struct beiscsi_hba *phba,
 			goto create_cq_error;
 		}
 
+		mem->dma = paddr;
 		ret = be_fill_queue(cq, phba->params.num_cq_entries,
 				    sizeof(struct sol_cqe), cq_vaddress);
 		if (ret) {

@@ -3088,7 +3089,6 @@ static int beiscsi_create_cqs(struct beiscsi_hba *phba,
 			goto create_cq_error;
 		}
 
-		mem->dma = paddr;
 		ret = beiscsi_cmd_cq_create(&phba->ctrl, cq, eq, false,
 					    false, 0);
 		if (ret) {

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 18:17 UTC #81 lore raw

PATCH 81/191 mwifiex: fix double free

From: Tom Rix <[email protected]>

[ Upstream commit 53708f4fd9cfe389beab5c8daa763bcd0e0b4aef ]

clang static analysis reports this problem:

sdio.c:2403:3: warning: Attempt to free released memory

        kfree(card->mpa_rx.buf);
        ^~~~~~~~~~~~~~~~~~~~~~~

When mwifiex_init_sdio() fails in its first call to mwifiex_alloc_sdio_mpa_buffer, it falls back to calling it again. If the second alloc of mpa_tx.buf fails, the error handler will try to free the old, previously freed mpa_rx.buf. Reviewing the code, it looks like a second double free would happen with mwifiex_cleanup_sdio().

So set both pointers to NULL when they are freed.

Fixes 5e6e3a92b9a4 ("wireless: mwifiex: initial commit for Marvell mwifiex driver")

Signed-off-by Tom Rix <[email protected]>

Reviewed-by Brian Norris <[email protected]>

Signed-off-by Kalle Valo <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/net/wireless/marvell/mwifiex/sdio.c | 2 ++
 1 file changed, 2 insertions(+)

drivers/net/wireless/marvell/mwifiex/sdio.c +2 -0

index fd5183c10c4ed..0e858621eef32 100644
@@ -1973,6 +1973,8 @@ static int mwifiex_alloc_sdio_mpa_buffers(struct mwifiex_adapter *adapter,
 		kfree(card->mpa_rx.buf);
 		card->mpa_tx.buf_size = 0;
 		card->mpa_rx.buf_size = 0;
+		card->mpa_tx.buf = NULL;
+		card->mpa_rx.buf = NULL;
 	}
 
 	return ret;

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 18:17 UTC #82 lore raw

PATCH 82/191 net: korina: fix kfree of rx/tx descriptor array

From: Valentin Vidic <[email protected]>

[ Upstream commit 3af5f0f5c74ecbaf757ef06c3f80d56751277637 ]

kmalloc returns KSEG0 addresses so convert back from KSEG1 in kfree. Also make sure array is freed when the driver is unloaded from the kernel.

Fixes ef11291bcd5f ("Add support the Korina (IDT RC32434) Ethernet MAC")

Signed-off-by Valentin Vidic <[email protected]>

Acked-by Willem de Bruijn <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/net/ethernet/korina.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

drivers/net/ethernet/korina.c +2 -1

index 3c0a6451273df..1357d464e8c43 100644
@@ -1188,7 +1188,7 @@ static int korina_probe(struct platform_device *pdev)
 	return rc;
 
 probe_err_register:
-	kfree(lp->td_ring);
+	kfree(KSEG0ADDR(lp->td_ring));
 probe_err_td_ring:
 	iounmap(lp->tx_dma_regs);
 probe_err_dma_tx:

@@ -1208,6 +1208,7 @@ static int korina_remove(struct platform_device *pdev)
 	iounmap(lp->eth_regs);
 	iounmap(lp->rx_dma_regs);
 	iounmap(lp->tx_dma_regs);
+	kfree(KSEG0ADDR(lp->td_ring));
 
 	unregister_netdev(bif->dev);
 	free_netdev(bif->dev);

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 18:17 UTC #83 lore raw

PATCH 83/191 mm/memcg: fix device private memcg accounting

From: Ralph Campbell <[email protected]>

[ Upstream commit 9a137153fc8798a89d8fce895cd0a06ea5b8e37c ]

The code in mc_handle_swap_pte() checks for non_swap_entry() and returns NULL before checking is_device_private_entry() so device private pages are never handled. Fix this by checking for non_swap_entry() after handling device private swap PTEs.

I assume the memory cgroup accounting would be off somehow when moving a process to another memory cgroup. Currently, the device private page is charged like a normal anonymous page when allocated and is uncharged when the page is freed so I think that path is OK.

Signed-off-by Ralph Campbell <[email protected]>

Acked-by Johannes Weiner <[email protected]>

Cc Michal Hocko <[email protected]>

Cc Vladimir Davydov <[email protected]>

Cc Jerome Glisse <[email protected]>

Cc Balbir Singh <[email protected]>

Cc Ira Weiny <[email protected]>

Link https://lkml.kernel.org/r/[email protected] open here

xFixes: c733a82874a7 ("mm/memcontrol: support MEMORY_DEVICE_PRIVATE")

Signed-off-by Sasha Levin <[email protected]>

---
 mm/memcontrol.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

mm/memcontrol.c +4 -1

index 5cbcd4b81bf8f..70707d44a6903 100644
@@ -4514,7 +4514,7 @@ static struct page *mc_handle_swap_pte(struct vm_area_struct *vma,
 	struct page *page = NULL;
 	swp_entry_t ent = pte_to_swp_entry(ptent);
 
-	if (!(mc.flags & MOVE_ANON) || non_swap_entry(ent))
+	if (!(mc.flags & MOVE_ANON))
 		return NULL;
 
 	/*

@@ -4533,6 +4533,9 @@ static struct page *mc_handle_swap_pte(struct vm_area_struct *vma,
 		return page;
 	}
 
+	if (non_swap_entry(ent))
+		return NULL;
+
 	/*
 	 * Because lookup_swap_cache() updates some statistics counter,
 	 * we call find_get_page() with swapper_space directly.

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 18:16 UTC #84 lore raw

PATCH 84/191 mm, oom_adj: dont loop through tasks in __set_oom_adj when not necessary

From: Suren Baghdasaryan <[email protected]>

[ Upstream commit 67197a4f28d28d0b073ab0427b03cb2ee5382578 ]

Currently __set_oom_adj loops through all processes in the system to keep oom_score_adj and oom_score_adj_min in sync between processes sharing their mm. This is done for any task with more that one mm_users, which includes processes with multiple threads (sharing mm and signals). However for such processes the loop is unnecessary because their signal structure is shared as well.

Android updates oom_score_adj whenever a tasks changes its role (background/foreground/...) or binds to/unbinds from a service, making it more/less important. Such operation can happen frequently. We noticed that updates to oom_score_adj became more expensive and after further investigation found out that the patch mentioned in "Fixes" introduced a regression. Using Pixel 4 with a typical Android workload, write time to oom_score_adj increased from ~3.57us to ~362us. Moreover this regression linearly depends on the number of multi-threaded processes running on the system.

Mark the mm with a new MMF_MULTIPROCESS flag bit when task is created with (CLONE_VM && !CLONE_THREAD && !CLONE_VFORK). Change __set_oom_adj to use MMF_MULTIPROCESS instead of mm_users to decide whether oom_score_adj update should be synchronized between multiple processes. To prevent races between clone() and __set_oom_adj(), when oom_score_adj of the process being cloned might be modified from userspace, we use oom_adj_mutex. Its scope is changed to global.

The combination of (CLONE_VM && !CLONE_THREAD) is rarely used except for the case of vfork(). To prevent performance regressions of vfork(), we skip taking oom_adj_mutex and setting MMF_MULTIPROCESS when CLONE_VFORK is specified. Clearing the MMF_MULTIPROCESS flag (when the last process sharing the mm exits) is left out of this patch to keep it simple and because it is believed that this threading model is rare. Should there ever be a need for optimizing that case as well, it can be done by hooking into the exit path, likely following the mm_update_next_owner pattern.

With the combination of (CLONE_VM && !CLONE_THREAD && !CLONE_VFORK) being quite rare, the regression is gone after the change is applied.

[[email protected]: v3]

Link https://lkml.kernel.org/r/[email protected] open here

Fixes 44a70adec910 ("mm, oom_adj: make sure processes sharing mm have same view of oom_score_adj")

Reported-by Tim Murray <[email protected]>

Signed-off-by Suren Baghdasaryan <[email protected]>

Acked-by Christian Brauner <[email protected]>

Acked-by Michal Hocko <[email protected]>

Acked-by Oleg Nesterov <[email protected]>

Cc Ingo Molnar <[email protected]>

Cc Peter Zijlstra <[email protected]>

Cc Thomas Gleixner <[email protected]>

Cc Eugene Syromiatnikov <[email protected]>

Cc Christian Kellner <[email protected]>

Cc Adrian Reber <[email protected]>

Cc Shakeel Butt <[email protected]>

Cc Aleksa Sarai <[email protected]>

Cc Alexey Dobriyan <[email protected]>

Cc "Eric W. Biederman" <[email protected]>

Cc Alexey Gladkov <[email protected]>

Cc Michel Lespinasse <[email protected]>

Cc Daniel Jordan <[email protected]>

Cc Andrei Vagin <[email protected]>

Cc Bernd Edlinger <[email protected]>

Cc John Johansen <[email protected]>

Cc Yafang Shao <[email protected]>

Link https://lkml.kernel.org/r/[email protected] open here

Debugged-by Minchan Kim <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 fs/proc/base.c                 |  3 +--
 include/linux/oom.h            |  1 +
 include/linux/sched/coredump.h |  1 +
 kernel/fork.c                  | 21 +++++++++++++++++++++
 mm/oom_kill.c                  |  2 ++
 5 files changed, 26 insertions(+), 2 deletions(-)

fs/proc/base.c +1 -2

index 64695dcf89f3b..eeb81d9648c67 100644
@@ -1041,7 +1041,6 @@ static ssize_t oom_adj_read(struct file *file, char __user *buf, size_t count,
 
 static int __set_oom_adj(struct file *file, int oom_adj, bool legacy)
 {
-	static DEFINE_MUTEX(oom_adj_mutex);
 	struct mm_struct *mm = NULL;
 	struct task_struct *task;
 	int err = 0;

@@ -1081,7 +1080,7 @@ static int __set_oom_adj(struct file *file, int oom_adj, bool legacy)
 		struct task_struct *p = find_lock_task_mm(task);
 
 		if (p) {
-			if (atomic_read(&p->mm->mm_users) > 1) {
+			if (test_bit(MMF_MULTIPROCESS, &p->mm->flags)) {
 				mm = p->mm;
 				mmgrab(mm);
 			}

include/linux/oom.h +1 -0

index 6adac113e96d2..c84597595cb41 100644
@@ -45,6 +45,7 @@ struct oom_control {
 };
 
 extern struct mutex oom_lock;
+extern struct mutex oom_adj_mutex;
 
 static inline void set_current_oom_origin(void)
 {

include/linux/sched/coredump.h +1 -0

index ecdc6542070f1..dfd82eab29025 100644
@@ -72,6 +72,7 @@ static inline int get_dumpable(struct mm_struct *mm)
 #define MMF_DISABLE_THP		24	/* disable THP for all VMAs */
 #define MMF_OOM_VICTIM		25	/* mm is the oom victim */
 #define MMF_OOM_REAP_QUEUED	26	/* mm was queued for oom_reaper */
+#define MMF_MULTIPROCESS	27	/* mm is shared between processes */
 #define MMF_DISABLE_THP_MASK	(1 << MMF_DISABLE_THP)
 
 #define MMF_INIT_MASK		(MMF_DUMPABLE_MASK | MMF_DUMP_FILTER_MASK |\

kernel/fork.c +21 -0

index 0a328cf0cb136..535aeb7ca145c 100644
@@ -1544,6 +1544,25 @@ static __always_inline void delayed_free_task(struct task_struct *tsk)
 		free_task(tsk);
 }
 
+static void copy_oom_score_adj(u64 clone_flags, struct task_struct *tsk)
+{
+	/* Skip if kernel thread */
+	if (!tsk->mm)
+		return;
+
+	/* Skip if spawning a thread or using vfork */
+	if ((clone_flags & (CLONE_VM | CLONE_THREAD | CLONE_VFORK)) != CLONE_VM)
+		return;
+
+	/* We need to synchronize with __set_oom_adj */
+	mutex_lock(&oom_adj_mutex);
+	set_bit(MMF_MULTIPROCESS, &tsk->mm->flags);
+	/* Update the values in case they were changed after copy_signal */
+	tsk->signal->oom_score_adj = current->signal->oom_score_adj;
+	tsk->signal->oom_score_adj_min = current->signal->oom_score_adj_min;
+	mutex_unlock(&oom_adj_mutex);
+}
+
 /*
  * This creates a new process as a copy of the old one,
  * but does not actually start it yet.

@@ -1952,6 +1971,8 @@ static __latent_entropy struct task_struct *copy_process(
 	trace_task_newtask(p, clone_flags);
 	uprobe_copy_process(p, clone_flags);
 
+	copy_oom_score_adj(clone_flags, p);
+
 	return p;
 
 bad_fork_cancel_cgroup:

mm/oom_kill.c +2 -0

index 7a5c0b229c6ae..6482d743c5c88 100644
@@ -53,6 +53,8 @@ int sysctl_oom_kill_allocating_task;
 int sysctl_oom_dump_tasks = 1;
 
 DEFINE_MUTEX(oom_lock);
+/* Serializes oom_score_adj and oom_score_adj_min updates */
+DEFINE_MUTEX(oom_adj_mutex);
 
 #ifdef CONFIG_NUMA
 /**

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 18:16 UTC #85 lore raw

PATCH 85/191 IB/mlx4: Fix starvation in paravirt mux/demux

From: Håkon Bugge <[email protected]>

[ Upstream commit 7fd1507df7cee9c533f38152fcd1dd769fcac6ce ]

The mlx4 driver will proxy MAD packets through the PF driver. A VM or an instantiated VF will send its MAD packets to the PF driver using loop-back. The PF driver will be informed by an interrupt, but defer the handling and polling of CQEs to a worker thread running on an ordered work-queue.

Consider the following scenario: the VMs will in short proximity in time, for example due to a network event, send many MAD packets to the PF driver. Lets say there are K VMs, each sending N packets.

The interrupt from the first VM will start the worker thread, which will poll N CQEs. A common case here is where the PF driver will multiplex the packets received from the VMs out on the wire QP.

But before the wire QP has returned a send CQE and associated interrupt, the other K - 1 VMs have sent their N packets as well.

The PF driver has to multiplex K * N packets out on the wire QP. But the send-queue on the wire QP has a finite capacity.

So, in this scenario, if K * N is larger than the send-queue capacity of the wire QP, we will get MAD packets dropped on the floor with this dynamic debug message:

mlx4_ib_multiplex_mad: failed sending GSI to wire on behalf of slave 2 (-11)

and this despite the fact that the wire send-queue could have capacity, but the PF driver isn't aware, because the wire send CQEs have not yet been polled.

We can also have a similar scenario inbound, with a wire recv-queue larger than the tunnel QP's send-queue. If many remote peers send MAD packets to the very same VM, the tunnel send-queue destined to the VM could allegedly be construed to be full by the PF driver.

This starvation is fixed by introducing separate work queues for the wire QPs vs. the tunnel QPs.

With this fix, using a dual ported HCA, 8 VFs instantiated, we could run cmtime on each of the 18 interfaces towards a similar configured peer, each cmtime instance with 800 QPs (all in all 14400 QPs) without a single CM packet getting lost.

Fixes 3cf69cc8dbeb ("IB/mlx4: Add CM paravirtualization")

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Håkon Bugge <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/infiniband/hw/mlx4/mad.c     | 34 +++++++++++++++++++++++++---
 drivers/infiniband/hw/mlx4/mlx4_ib.h |  2 ++
 2 files changed, 33 insertions(+), 3 deletions(-)

drivers/infiniband/hw/mlx4/mad.c +31 -3

index c69158ccab822..60d4f2c9c24d8 100644
@@ -1305,6 +1305,18 @@ static void mlx4_ib_tunnel_comp_handler(struct ib_cq *cq, void *arg)
 	spin_unlock_irqrestore(&dev->sriov.going_down_lock, flags);
 }
 
+static void mlx4_ib_wire_comp_handler(struct ib_cq *cq, void *arg)
+{
+	unsigned long flags;
+	struct mlx4_ib_demux_pv_ctx *ctx = cq->cq_context;
+	struct mlx4_ib_dev *dev = to_mdev(ctx->ib_dev);
+
+	spin_lock_irqsave(&dev->sriov.going_down_lock, flags);
+	if (!dev->sriov.is_going_down && ctx->state == DEMUX_PV_STATE_ACTIVE)
+		queue_work(ctx->wi_wq, &ctx->work);
+	spin_unlock_irqrestore(&dev->sriov.going_down_lock, flags);
+}
+
 static int mlx4_ib_post_pv_qp_buf(struct mlx4_ib_demux_pv_ctx *ctx,
 				  struct mlx4_ib_demux_pv_qp *tun_qp,
 				  int index)

@@ -2012,7 +2024,8 @@ static int create_pv_resources(struct ib_device *ibdev, int slave, int port,
 		cq_size *= 2;
 
 	cq_attr.cqe = cq_size;
-	ctx->cq = ib_create_cq(ctx->ib_dev, mlx4_ib_tunnel_comp_handler,
+	ctx->cq = ib_create_cq(ctx->ib_dev,
+			       create_tun ? mlx4_ib_tunnel_comp_handler : mlx4_ib_wire_comp_handler,
 			       NULL, ctx, &cq_attr);
 	if (IS_ERR(ctx->cq)) {
 		ret = PTR_ERR(ctx->cq);

@@ -2049,6 +2062,7 @@ static int create_pv_resources(struct ib_device *ibdev, int slave, int port,
 		INIT_WORK(&ctx->work, mlx4_ib_sqp_comp_worker);
 
 	ctx->wq = to_mdev(ibdev)->sriov.demux[port - 1].wq;
+	ctx->wi_wq = to_mdev(ibdev)->sriov.demux[port - 1].wi_wq;
 
 	ret = ib_req_notify_cq(ctx->cq, IB_CQ_NEXT_COMP);
 	if (ret) {

@@ -2192,7 +2206,7 @@ static int mlx4_ib_alloc_demux_ctx(struct mlx4_ib_dev *dev,
 		goto err_mcg;
 	}
 
-	snprintf(name, sizeof name, "mlx4_ibt%d", port);
+	snprintf(name, sizeof(name), "mlx4_ibt%d", port);
 	ctx->wq = alloc_ordered_workqueue(name, WQ_MEM_RECLAIM);
 	if (!ctx->wq) {
 		pr_err("Failed to create tunnelling WQ for port %d\n", port);

@@ -2200,7 +2214,15 @@ static int mlx4_ib_alloc_demux_ctx(struct mlx4_ib_dev *dev,
 		goto err_wq;
 	}
 
-	snprintf(name, sizeof name, "mlx4_ibud%d", port);
+	snprintf(name, sizeof(name), "mlx4_ibwi%d", port);
+	ctx->wi_wq = alloc_ordered_workqueue(name, WQ_MEM_RECLAIM);
+	if (!ctx->wi_wq) {
+		pr_err("Failed to create wire WQ for port %d\n", port);
+		ret = -ENOMEM;
+		goto err_wiwq;
+	}
+
+	snprintf(name, sizeof(name), "mlx4_ibud%d", port);
 	ctx->ud_wq = alloc_ordered_workqueue(name, WQ_MEM_RECLAIM);
 	if (!ctx->ud_wq) {
 		pr_err("Failed to create up/down WQ for port %d\n", port);

@@ -2211,6 +2233,10 @@ static int mlx4_ib_alloc_demux_ctx(struct mlx4_ib_dev *dev,
 	return 0;
 
 err_udwq:
+	destroy_workqueue(ctx->wi_wq);
+	ctx->wi_wq = NULL;
+
+err_wiwq:
 	destroy_workqueue(ctx->wq);
 	ctx->wq = NULL;

@@ -2258,12 +2284,14 @@ static void mlx4_ib_free_demux_ctx(struct mlx4_ib_demux_ctx *ctx)
 				ctx->tun[i]->state = DEMUX_PV_STATE_DOWNING;
 		}
 		flush_workqueue(ctx->wq);
+		flush_workqueue(ctx->wi_wq);
 		for (i = 0; i < dev->dev->caps.sqp_demux; i++) {
 			destroy_pv_resources(dev, i, ctx->port, ctx->tun[i], 0);
 			free_pv_object(dev, i, ctx->port);
 		}
 		kfree(ctx->tun);
 		destroy_workqueue(ctx->ud_wq);
+		destroy_workqueue(ctx->wi_wq);
 		destroy_workqueue(ctx->wq);
 	}
 }

drivers/infiniband/hw/mlx4/mlx4_ib.h +2 -0

index 1fa19820355af..ed72c09080c1d 100644
@@ -463,6 +463,7 @@ struct mlx4_ib_demux_pv_ctx {
 	struct ib_pd *pd;
 	struct work_struct work;
 	struct workqueue_struct *wq;
+	struct workqueue_struct *wi_wq;
 	struct mlx4_ib_demux_pv_qp qp[2];
 };

@@ -470,6 +471,7 @@ struct mlx4_ib_demux_ctx {
 	struct ib_device *ib_dev;
 	int port;
 	struct workqueue_struct *wq;
+	struct workqueue_struct *wi_wq;
 	struct workqueue_struct *ud_wq;
 	spinlock_t ud_lock;
 	atomic64_t subnet_prefix;

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 14:12 UTC #86 lore raw

PATCH 86/191 IB/mlx4: Adjust delayed work when a dup is observed

From: Håkon Bugge <[email protected]>

[ Upstream commit 785167a114855c5aa75efca97000e405c2cc85bf ]

When scheduling delayed work to clean up the cache, if the entry already has been scheduled for deletion, we adjust the delay.

Fixes 3cf69cc8dbeb ("IB/mlx4: Add CM paravirtualization")

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Håkon Bugge <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/infiniband/hw/mlx4/cm.c | 3 +++
 1 file changed, 3 insertions(+)

drivers/infiniband/hw/mlx4/cm.c +3 -0

index 8c79a480f2b76..d3e11503e67ca 100644
@@ -307,6 +307,9 @@ static void schedule_delayed(struct ib_device *ibdev, struct id_map_entry *id)
 	if (!sriov->is_going_down) {
 		id->scheduled_delete = 1;
 		schedule_delayed_work(&id->timeout, CM_CLEANUP_CACHE_TIMEOUT);
+	} else if (id->scheduled_delete) {
+		/* Adjust timeout if already scheduled */
+		mod_delayed_work(system_wq, &id->timeout, CM_CLEANUP_CACHE_TIMEOUT);
 	}
 	spin_unlock_irqrestore(&sriov->going_down_lock, flags);
 	spin_unlock(&sriov->id_map_lock);

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 18:16 UTC #87 lore raw

PATCH 87/191 powerpc/pseries: Fix missing of_node_put() in rng_init()

From: Nicholas Mc Guire <[email protected]>

[ Upstream commit 67c3e59443f5fc77be39e2ce0db75fbfa78c7965 ]

The call to of_find_compatible_node() returns a node pointer with refcount incremented thus it must be explicitly decremented here before returning.

Fixes a489043f4626 ("powerpc/pseries: Implement arch_get_random_long() based on H_RANDOM")

Signed-off-by Nicholas Mc Guire <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 arch/powerpc/platforms/pseries/rng.c | 1 +
 1 file changed, 1 insertion(+)

arch/powerpc/platforms/pseries/rng.c +1 -0

index 31ca557af60bc..262b8c5e1b9d0 100644
@@ -40,6 +40,7 @@ static __init int rng_init(void)
 
 	ppc_md.get_random_seed = pseries_get_random_long;
 
+	of_node_put(dn);
 	return 0;
 }
 machine_subsys_initcall(pseries, rng_init);

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 18:16 UTC #88 lore raw

PATCH 88/191 powerpc/icp-hv: Fix missing of_node_put() in success path

From: Nicholas Mc Guire <[email protected]>

[ Upstream commit d3e669f31ec35856f5e85df9224ede5bdbf1bc7b ]

Both of_find_compatible_node() and of_find_node_by_type() will return a refcounted node on success - thus for the success path the node must be explicitly released with a of_node_put().

Fixes 0b05ac6e2480 ("powerpc/xics: Rewrite XICS driver")

Signed-off-by Nicholas Mc Guire <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 arch/powerpc/sysdev/xics/icp-hv.c | 1 +
 1 file changed, 1 insertion(+)

arch/powerpc/sysdev/xics/icp-hv.c +1 -0

index bbc839a98c414..003deaabb5680 100644
@@ -179,6 +179,7 @@ int icp_hv_init(void)
 
 	icp_ops = &icp_hv_ops;
 
+	of_node_put(np);
 	return 0;
 }

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 14:12 UTC #89 lore raw

PATCH 89/191 mtd: lpddr: fix excessive stack usage with clang

Link https://lore.kernel.org/linux-mtd/[email protected] open here

From: Arnd Bergmann <[email protected]>

[ Upstream commit 3e1b6469f8324bee5927b063e2aca30d3e56b907 ]

Building lpddr2_nvm with clang can result in a giant stack usage in one function:

drivers/mtd/lpddr/lpddr2_nvm.c:399:12: error: stack frame size of 1144 bytes in function 'lpddr2_nvm_probe' [-Werror,-Wframe-larger-than=]

The problem is that clang decides to build a copy of the mtd_info structure on the stack and then do a memcpy() into the actual version. It shouldn't really do it that way, but it's not strictly a bug either.

As a workaround, use a static const version of the structure to assign most of the members upfront and then only set the few members that require runtime knowledge at probe time.

Fixes 96ba9dd65788 ("mtd: lpddr: add driver for LPDDR2-NVM PCM memories")

Signed-off-by Arnd Bergmann <[email protected]>

Reviewed-by Nathan Chancellor <[email protected]>

Acked-by Miquel Raynal <[email protected]>

Signed-off-by Miquel Raynal <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/mtd/lpddr/lpddr2_nvm.c | 35 ++++++++++++++++++----------------
 1 file changed, 19 insertions(+), 16 deletions(-)

drivers/mtd/lpddr/lpddr2_nvm.c +19 ~~-16~~

index 2342277c9bcb0..5e36366d9b36d 100644
@@ -408,6 +408,17 @@ static int lpddr2_nvm_lock(struct mtd_info *mtd, loff_t start_add,
 	return lpddr2_nvm_do_block_op(mtd, start_add, len, LPDDR2_NVM_LOCK);
 }
 
+static const struct mtd_info lpddr2_nvm_mtd_info = {
+	.type		= MTD_RAM,
+	.writesize	= 1,
+	.flags		= (MTD_CAP_NVRAM | MTD_POWERUP_LOCK),
+	._read		= lpddr2_nvm_read,
+	._write		= lpddr2_nvm_write,
+	._erase		= lpddr2_nvm_erase,
+	._unlock	= lpddr2_nvm_unlock,
+	._lock		= lpddr2_nvm_lock,
+};
+
 /*
  * lpddr2_nvm driver probe method
  */

@@ -448,6 +459,7 @@ static int lpddr2_nvm_probe(struct platform_device *pdev)
 		.pfow_base	= OW_BASE_ADDRESS,
 		.fldrv_priv	= pcm_data,
 	};
+
 	if (IS_ERR(map->virt))
 		return PTR_ERR(map->virt);

@@ -459,22 +471,13 @@ static int lpddr2_nvm_probe(struct platform_device *pdev)
 		return PTR_ERR(pcm_data->ctl_regs);
 
 	/* Populate mtd_info data structure */
-	*mtd = (struct mtd_info) {
-		.dev		= { .parent = &pdev->dev },
-		.name		= pdev->dev.init_name,
-		.type		= MTD_RAM,
-		.priv		= map,
-		.size		= resource_size(add_range),
-		.erasesize	= ERASE_BLOCKSIZE * pcm_data->bus_width,
-		.writesize	= 1,
-		.writebufsize	= WRITE_BUFFSIZE * pcm_data->bus_width,
-		.flags		= (MTD_CAP_NVRAM | MTD_POWERUP_LOCK),
-		._read		= lpddr2_nvm_read,
-		._write		= lpddr2_nvm_write,
-		._erase		= lpddr2_nvm_erase,
-		._unlock	= lpddr2_nvm_unlock,
-		._lock		= lpddr2_nvm_lock,
-	};
+	*mtd = lpddr2_nvm_mtd_info;
+	mtd->dev.parent		= &pdev->dev;
+	mtd->name		= pdev->dev.init_name;
+	mtd->priv		= map;
+	mtd->size		= resource_size(add_range);
+	mtd->erasesize		= ERASE_BLOCKSIZE * pcm_data->bus_width;
+	mtd->writebufsize	= WRITE_BUFFSIZE * pcm_data->bus_width;
 
 	/* Verify the presence of the device looking for PFOW string */
 	if (!lpddr2_nvm_pfow_present(map)) {

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 18:16 UTC #90 lore raw

PATCH 90/191 mtd: mtdoops: Dont write panic data twice

Link https://lore.kernel.org/linux-mtd/[email protected] open here

From: Mark Tomlinson <[email protected]>

[ Upstream commit c1cf1d57d1492235309111ea6a900940213a9166 ]

If calling mtdoops_write, don't also schedule work to be done later.

Although this appears to not be causing an issue, possibly because the scheduled work will never get done, it is confusing.

Fixes 016c1291ce70 ("mtd: mtdoops: do not use mtd->panic_write directly")

Signed-off-by Mark Tomlinson <[email protected]>

Signed-off-by Miquel Raynal <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/mtd/mtdoops.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

drivers/mtd/mtdoops.c +6 -5

index 97bb8f6304d4f..09165eaac7a15 100644
@@ -313,12 +313,13 @@ static void mtdoops_do_dump(struct kmsg_dumper *dumper,
 	kmsg_dump_get_buffer(dumper, true, cxt->oops_buf + MTDOOPS_HEADER_SIZE,
 			     record_size - MTDOOPS_HEADER_SIZE, NULL);
 
-	/* Panics must be written immediately */
-	if (reason != KMSG_DUMP_OOPS)
+	if (reason != KMSG_DUMP_OOPS) {
+		/* Panics must be written immediately */
 		mtdoops_write(cxt, 1);
-
-	/* For other cases, schedule work to write it "nicely" */
-	schedule_work(&cxt->work_write);
+	} else {
+		/* For other cases, schedule work to write it "nicely" */
+		schedule_work(&cxt->work_write);
+	}
 }
 
 static void mtdoops_notify_add(struct mtd_info *mtd)

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 18:16 UTC #91 lore raw

PATCH 91/191 ARM: 9007/1: l2c: fix prefetch bits init in L2X0_AUX_CTRL using DT values

Link https://lore.kernel.org/lkml/76f2f3ad5e77e356e0a5b99ceee1e774a2842c25.1597061474.git.guillaume.tucker@collabora.com/ open here

From: Guillaume Tucker <[email protected]>

[ Upstream commit 8e007b367a59bcdf484c81f6df9bd5a4cc179ca6 ]

The L310_PREFETCH_CTRL register bits 28 and 29 to enable data and instruction prefetch respectively can also be accessed via the L2X0_AUX_CTRL register. They appear to be actually wired together in hardware between the registers. Changing them in the prefetch register only will get undone when restoring the aux control register later on. For this reason, set these bits in both registers during initialisation according to the devicetree property values.

Fixes ec3bd0e68a67 ("ARM: 8391/1: l2c: add options to overwrite prefetching behavior")

Signed-off-by Guillaume Tucker <[email protected]>

Signed-off-by Russell King <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 arch/arm/mm/cache-l2x0.c | 16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)

arch/arm/mm/cache-l2x0.c +12 -4

index 808efbb89b88c..02f613def40dc 100644
@@ -1261,20 +1261,28 @@ static void __init l2c310_of_parse(const struct device_node *np,
 
 	ret = of_property_read_u32(np, "prefetch-data", &val);
 	if (ret == 0) {
-		if (val)
+		if (val) {
 			prefetch |= L310_PREFETCH_CTRL_DATA_PREFETCH;
-		else
+			*aux_val |= L310_PREFETCH_CTRL_DATA_PREFETCH;
+		} else {
 			prefetch &= ~L310_PREFETCH_CTRL_DATA_PREFETCH;
+			*aux_val &= ~L310_PREFETCH_CTRL_DATA_PREFETCH;
+		}
+		*aux_mask &= ~L310_PREFETCH_CTRL_DATA_PREFETCH;
 	} else if (ret != -EINVAL) {
 		pr_err("L2C-310 OF prefetch-data property value is missing\n");
 	}
 
 	ret = of_property_read_u32(np, "prefetch-instr", &val);
 	if (ret == 0) {
-		if (val)
+		if (val) {
 			prefetch |= L310_PREFETCH_CTRL_INSTR_PREFETCH;
-		else
+			*aux_val |= L310_PREFETCH_CTRL_INSTR_PREFETCH;
+		} else {
 			prefetch &= ~L310_PREFETCH_CTRL_INSTR_PREFETCH;
+			*aux_val &= ~L310_PREFETCH_CTRL_INSTR_PREFETCH;
+		}
+		*aux_mask &= ~L310_PREFETCH_CTRL_INSTR_PREFETCH;
 	} else if (ret != -EINVAL) {
 		pr_err("L2C-310 OF prefetch-instr property value is missing\n");
 	}

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 18:16 UTC #92 lore raw

PATCH 92/191 arc: plat-hsdk: fix kconfig dependency warning when !RESET_CONTROLLER

From: Necip Fazil Yildiran <[email protected]>

[ Upstream commit 63bcf87cb1c57956e1179f1a78dde625c7e3cba7 ]

When ARC_SOC_HSDK is enabled and RESET_CONTROLLER is disabled, it results in the following Kbuild warning:

WARNING: unmet direct dependencies detected for RESET_HSDK
Depends on [n]: RESET_CONTROLLER [=n] && HAS_IOMEM [=y] && (ARC_SOC_HSDK [=y] || COMPILE_TEST [=n]) Selected by [y]:
- ARC_SOC_HSDK [=y] && ISA_ARCV2 [=y]

The reason is that ARC_SOC_HSDK selects RESET_HSDK without depending on or selecting RESET_CONTROLLER while RESET_HSDK is subordinate to RESET_CONTROLLER.

Honor the kconfig menu hierarchy to remove kconfig dependency warnings.

Fixes a528629dfd3b ("ARC: [plat-hsdk] select CONFIG_RESET_HSDK from Kconfig")

Signed-off-by Necip Fazil Yildiran <[email protected]>

Signed-off-by Vineet Gupta <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 arch/arc/plat-hsdk/Kconfig | 1 +
 1 file changed, 1 insertion(+)

arch/arc/plat-hsdk/Kconfig +1 -0

index 8fb1600b29b76..e5f65a044c7b9 100644
@@ -11,4 +11,5 @@ menuconfig ARC_SOC_HSDK
 	select ARC_HAS_ACCL_REGS
 	select ARC_IRQ_NO_AUTOSAVE
 	select CLK_HSDK
+	select RESET_CONTROLLER
 	select RESET_HSDK

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 18:16 UTC #93 lore raw

PATCH 93/191 xfs: limit entries returned when counting fsmap records

From: Darrick J. Wong <[email protected]>

[ Upstream commit acd1ac3aa22fd58803a12d26b1ab7f70232f8d8d ]

If userspace asked fsmap to count the number of entries, we cannot return more than UINT_MAX entries because fmh_entries is u32. Therefore, stop counting if we hit this limit or else we will waste time to return truncated results.

Fixes e89c041338ed ("xfs: implement the GETFSMAP ioctl")

Signed-off-by Darrick J. Wong <[email protected]>

Reviewed-by Christoph Hellwig <[email protected]>

Reviewed-by Chandan Babu R <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 fs/xfs/xfs_fsmap.c | 3 +++
 1 file changed, 3 insertions(+)

fs/xfs/xfs_fsmap.c +3 -0

index 43cfc07996a43..e7622e0841868 100644
@@ -273,6 +273,9 @@ xfs_getfsmap_helper(
 
 	/* Are we just counting mappings? */
 	if (info->head->fmh_count == 0) {
+		if (info->head->fmh_entries == UINT_MAX)
+			return -ECANCELED;
+
 		if (rec_daddr > info->next_daddr)
 			info->head->fmh_entries++;

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 18:16 UTC #94 lore raw

PATCH 94/191 RDMA/qedr: Fix use of uninitialized field

From: Michal Kalderon <[email protected]>

[ Upstream commit a379ad54e55a12618cae7f6333fd1b3071de9606 ]

dev->attr.page_size_caps was used uninitialized when setting device attributes

Fixes ec72fce401c6 ("qedr: Add support for RoCE HW init")

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Michal Kalderon <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/infiniband/hw/qedr/main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

drivers/infiniband/hw/qedr/main.c +1 -1

index 3e48ed64760b7..8c9e23d1f434e 100644
@@ -548,7 +548,7 @@ static int qedr_set_device_attr(struct qedr_dev *dev)
 	qed_attr = dev->ops->rdma_query_device(dev->rdma_ctx);
 
 	/* Part 2 - check capabilities */
-	page_size = ~dev->attr.page_size_caps + 1;
+	page_size = ~qed_attr->page_size_caps + 1;
 	if (page_size > PAGE_SIZE) {
 		DP_ERR(dev,
 		       "Kernel PAGE_SIZE is %ld which is smaller than minimum page size (%d) required by qedr\n",

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 14:12 UTC #95 lore raw

PATCH 95/191 powerpc/tau: Use appropriate temperature sample interval

From: Finn Thain <[email protected]>

[ Upstream commit 66943005cc41f48e4d05614e8f76c0ca1812f0fd ]

According to the MPC750 Users Manual, the SITV value in Thermal Management Register 3 is 13 bits long. The present code calculates the SITV value as 60 * 500 cycles. This would overflow to give 10 us on a 500 MHz CPU rather than the intended 60 us. (But according to the Microprocessor Datasheet, there is also a factor of 266 that has to be applied to this value on certain parts i.e. speed sort above 266 MHz.) Always use the maximum cycle count, as recommended by the Datasheet.

Fixes 1da177e4c3f41 ("Linux-2.6.12-rc2")

Signed-off-by Finn Thain <[email protected]>

Tested-by Stan Johnson <[email protected]>

Link https://lore.kernel.org/r/896f542e5f0f1d6cf8218524c2b67d79f3d69b3c.1599260540.git.fthain@telegraphics.com.au open here

Signed-off-by Sasha Levin <[email protected]>

---
 arch/powerpc/include/asm/reg.h |  2 +-
 arch/powerpc/kernel/tau_6xx.c  | 12 ++++--------
 2 files changed, 5 insertions(+), 9 deletions(-)

arch/powerpc/include/asm/reg.h +1 -1

index 05f3c2b3aa0ec..d6be5781a97ce 100644
@@ -753,7 +753,7 @@
 #define THRM1_TIN	(1 << 31)
 #define THRM1_TIV	(1 << 30)
 #define THRM1_THRES(x)	((x&0x7f)<<23)
-#define THRM3_SITV(x)	((x&0x3fff)<<1)
+#define THRM3_SITV(x)	((x & 0x1fff) << 1)
 #define THRM1_TID	(1<<2)
 #define THRM1_TIE	(1<<1)
 #define THRM1_V		(1<<0)

arch/powerpc/kernel/tau_6xx.c +4 -8

index a3374e8a258c6..64a27b20cf55e 100644
@@ -175,15 +175,11 @@ static void tau_timeout(void * info)
 	 * complex sleep code needs to be added. One mtspr every time
 	 * tau_timeout is called is probably not a big deal.
 	 *
-	 * Enable thermal sensor and set up sample interval timer
-	 * need 20 us to do the compare.. until a nice 'cpu_speed' function
-	 * call is implemented, just assume a 500 mhz clock. It doesn't really
-	 * matter if we take too long for a compare since it's all interrupt
-	 * driven anyway.
-	 *
-	 * use a extra long time.. (60 us @ 500 mhz)
+	 * The "PowerPC 740 and PowerPC 750 Microprocessor Datasheet"
+	 * recommends that "the maximum value be set in THRM3 under all
+	 * conditions."
 	 */
-	mtspr(SPRN_THRM3, THRM3_SITV(500*60) | THRM3_E);
+	mtspr(SPRN_THRM3, THRM3_SITV(0x1fff) | THRM3_E);
 
 	local_irq_restore(flags);
 }

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 14:12 UTC #96 lore raw

PATCH 96/191 powerpc/tau: Remove duplicated set_thresholds() call

From: Finn Thain <[email protected]>

[ Upstream commit 420ab2bc7544d978a5d0762ee736412fe9c796ab ]

The commentary at the call site seems to disagree with the code. The conditional prevents calling set_thresholds() via the exception handler, which appears to crash. Perhaps that's because it immediately triggers another TAU exception. Anyway, calling set_thresholds() from TAUupdate() is redundant because tau_timeout() does so.

Fixes 1da177e4c3f41 ("Linux-2.6.12-rc2")

Signed-off-by Finn Thain <[email protected]>

Tested-by Stan Johnson <[email protected]>

Link https://lore.kernel.org/r/d7c7ee33232cf72a6a6bbb6ef05838b2e2b113c0.1599260540.git.fthain@telegraphics.com.au open here

Signed-off-by Sasha Levin <[email protected]>

---
 arch/powerpc/kernel/tau_6xx.c | 5 -----
 1 file changed, 5 deletions(-)

arch/powerpc/kernel/tau_6xx.c +0 -5

index 64a27b20cf55e..9e8b709a2aae4 100644
@@ -108,11 +108,6 @@ void TAUupdate(int cpu)
 #ifdef DEBUG
 	printk("grew = %d\n", tau[cpu].grew);
 #endif
-
-#ifndef CONFIG_TAU_INT /* tau_timeout will do this if not using interrupts */
-	set_thresholds(cpu);
-#endif
-
 }
 
 #ifdef CONFIG_TAU_INT

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 14:16 UTC #97 lore raw

PATCH 97/191 powerpc/tau: Disable TAU between measurements

From: Finn Thain <[email protected]>

[ Upstream commit e63d6fb5637e92725cf143559672a34b706bca4f ]

Enabling CONFIG_TAU_INT causes random crashes:

Unrecoverable exception 1700 at c0009414 (msr=1000)

Oops: Unrecoverable exception, sig: 6 [#1]
BE PAGE_SIZE=4K MMU=Hash SMP NR_CPUS=2 PowerMac
Modules linked in:
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.7.0-pmac-00043-gd5f545e1a8593 #5
NIP:  c0009414 LR: c0009414 CTR: c00116fc
REGS: c0799eb8 TRAP: 1700   Not tainted  (5.7.0-pmac-00043-gd5f545e1a8593)
MSR:  00001000 <ME>  CR: 22000228  XER: 00000100

GPR00: 00000000 c0799f70 c076e300 00800000 0291c0ac 00e00000 c076e300 00049032
GPR08: 00000001 c00116fc 00000000 dfbd3200 ffffffff 007f80a8 00000000 00000000
GPR16: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 c075ce04
GPR24: c075ce04 dfff8880 c07b0000 c075ce04 00080000 00000001 c079ef98 c079ef5c NIP [c0009414] arch_cpu_idle+0x24/0x6c
LR [c0009414] arch_cpu_idle+0x24/0x6c

Call Trace:

[c0799f70] [00000001] 0x1 (unreliable)
[c0799f80] [c0060990] do_idle+0xd8/0x17c
[c0799fa0] [c0060ba4] cpu_startup_entry+0x20/0x28
[c0799fb0] [c072d220] start_kernel+0x434/0x44c
[c0799ff0] [00003860] 0x3860
Instruction dump:
XXXXXXXX XXXXXXXX XXXXXXXX 3d20c07b XXXXXXXX XXXXXXXX XXXXXXXX 7c0802a6 XXXXXXXX XXXXXXXX XXXXXXXX 4e800421 XXXXXXXX XXXXXXXX XXXXXXXX 7d2000a6

---[ end trace 3a0c9b5cb216db6b ]---

Resolve this problem by disabling each THRMn comparator when handling the associated THRMn interrupt and by disabling the TAU entirely when updating THRMn thresholds.

Fixes 1da177e4c3f41 ("Linux-2.6.12-rc2")

Signed-off-by Finn Thain <[email protected]>

Tested-by Stan Johnson <[email protected]>

Link https://lore.kernel.org/r/5a0ba3dc5612c7aac596727331284a3676c08472.1599260540.git.fthain@telegraphics.com.au open here

Signed-off-by Sasha Levin <[email protected]>

---
 arch/powerpc/kernel/tau_6xx.c  | 65 +++++++++++++---------------------
 arch/powerpc/platforms/Kconfig |  9 ++---
 2 files changed, 26 insertions(+), 48 deletions(-)

arch/powerpc/kernel/tau_6xx.c +24 ~~-41~~

index 9e8b709a2aae4..2615cd66dad84 100644
@@ -38,8 +38,6 @@ static struct tau_temp
 
 struct timer_list tau_timer;
 
-#undef DEBUG
-
 /* TODO: put these in a /proc interface, with some sanity checks, and maybe
  * dynamic adjustment to minimize # of interrupts */
 /* configurable values for step size and how much to expand the window when

@@ -72,42 +70,33 @@ void set_thresholds(unsigned long cpu)
 
 void TAUupdate(int cpu)
 {
-	unsigned thrm;
-
-#ifdef DEBUG
-	printk("TAUupdate ");
-#endif
+	u32 thrm;
+	u32 bits = THRM1_TIV | THRM1_TIN | THRM1_V;
 
 	/* if both thresholds are crossed, the step_sizes cancel out
 	 * and the window winds up getting expanded twice. */
-	if((thrm = mfspr(SPRN_THRM1)) & THRM1_TIV){ /* is valid? */
-		if(thrm & THRM1_TIN){ /* crossed low threshold */
-			if (tau[cpu].low >= step_size){
-				tau[cpu].low -= step_size;
-				tau[cpu].high -= (step_size - window_expand);
-			}
-			tau[cpu].grew = 1;
-#ifdef DEBUG
-			printk("low threshold crossed ");
-#endif
+	thrm = mfspr(SPRN_THRM1);
+	if ((thrm & bits) == bits) {
+		mtspr(SPRN_THRM1, 0);
+
+		if (tau[cpu].low >= step_size) {
+			tau[cpu].low -= step_size;
+			tau[cpu].high -= (step_size - window_expand);
 		}
+		tau[cpu].grew = 1;
+		pr_debug("%s: low threshold crossed\n", __func__);
 	}
-	if((thrm = mfspr(SPRN_THRM2)) & THRM1_TIV){ /* is valid? */
-		if(thrm & THRM1_TIN){ /* crossed high threshold */
-			if (tau[cpu].high <= 127-step_size){
-				tau[cpu].low += (step_size - window_expand);
-				tau[cpu].high += step_size;
-			}
-			tau[cpu].grew = 1;
-#ifdef DEBUG
-			printk("high threshold crossed ");
-#endif
+	thrm = mfspr(SPRN_THRM2);
+	if ((thrm & bits) == bits) {
+		mtspr(SPRN_THRM2, 0);
+
+		if (tau[cpu].high <= 127 - step_size) {
+			tau[cpu].low += (step_size - window_expand);
+			tau[cpu].high += step_size;
 		}
+		tau[cpu].grew = 1;
+		pr_debug("%s: high threshold crossed\n", __func__);
 	}
-
-#ifdef DEBUG
-	printk("grew = %d\n", tau[cpu].grew);
-#endif
 }
 
 #ifdef CONFIG_TAU_INT

@@ -132,18 +121,18 @@ void TAUException(struct pt_regs * regs)
 static void tau_timeout(void * info)
 {
 	int cpu;
-	unsigned long flags;
 	int size;
 	int shrink;
 
-	/* disabling interrupts *should* be okay */
-	local_irq_save(flags);
 	cpu = smp_processor_id();
 
 #ifndef CONFIG_TAU_INT
 	TAUupdate(cpu);
 #endif
 
+	/* Stop thermal sensor comparisons and interrupts */
+	mtspr(SPRN_THRM3, 0);
+
 	size = tau[cpu].high - tau[cpu].low;
 	if (size > min_window && ! tau[cpu].grew) {
 		/* do an exponential shrink of half the amount currently over size */

@@ -165,18 +154,12 @@ static void tau_timeout(void * info)
 
 	set_thresholds(cpu);
 
-	/*
-	 * Do the enable every time, since otherwise a bunch of (relatively)
-	 * complex sleep code needs to be added. One mtspr every time
-	 * tau_timeout is called is probably not a big deal.
-	 *
+	/* Restart thermal sensor comparisons and interrupts.
 	 * The "PowerPC 740 and PowerPC 750 Microprocessor Datasheet"
 	 * recommends that "the maximum value be set in THRM3 under all
 	 * conditions."
 	 */
 	mtspr(SPRN_THRM3, THRM3_SITV(0x1fff) | THRM3_E);
-
-	local_irq_restore(flags);
 }
 
 static void tau_timeout_smp(unsigned long unused)

arch/powerpc/platforms/Kconfig +2 -7

index d5e34ce5fd5d9..e06ccba351330 100644
@@ -243,7 +243,7 @@ config TAU
 	  temp is actually what /proc/cpuinfo says it is.
 
 config TAU_INT
-	bool "Interrupt driven TAU driver (DANGEROUS)"
+	bool "Interrupt driven TAU driver (EXPERIMENTAL)"
 	depends on TAU
 	---help---
 	  The TAU supports an interrupt driven mode which causes an interrupt

@@ -251,12 +251,7 @@ config TAU_INT
 	  to get notified the temp has exceeded a range. With this option off,
 	  a timer is used to re-check the temperature periodically.
 
-	  However, on some cpus it appears that the TAU interrupt hardware
-	  is buggy and can cause a situation which would lead unexplained hard
-	  lockups.
-
-	  Unless you are extending the TAU driver, or enjoy kernel/hardware
-	  debugging, leave this option off.
+	  If in doubt, say N here.
 
 config TAU_AVERAGE
 	bool "Average high and low temp"

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 14:12 UTC #98 lore raw

PATCH 98/191 perf intel-pt: Fix "context_switch event has no tid" error

Link http://lore.kernel.org/lkml/[email protected] open here

From: Adrian Hunter <[email protected]>

[ Upstream commit 7d537a8d2e76bc4fc71e34545ceaa463ac2cd928 ]

A context_switch event can have no tid because pids can be detached from a task while the task is still running (in do_exit()). Note this won't happen with per-task contexts because then tracing stops at perf_event_exit_task()

If a task with no tid gets preempted, or a dying task gets preempted and its parent releases it, when it subsequently gets switched back in, Intel PT will not be able to determine what task is running and prints an error "context_switch event has no tid". However, it is not really an error because the task is in kernel space and the decoder can continue to decode successfully. Fix by changing the error to be only a logged message, and make allowance for tid == -1.

Example:

Using 5.9-rc4 with Preemptible Kernel (Low-Latency Desktop) e.g.

  $ uname -r
  5.9.0-rc4
  $ grep PREEMPT .config
  # CONFIG_PREEMPT_NONE is not set
  # CONFIG_PREEMPT_VOLUNTARY is not set
  CONFIG_PREEMPT=y
  CONFIG_PREEMPT_COUNT=y
  CONFIG_PREEMPTION=y
  CONFIG_PREEMPT_RCU=y
  CONFIG_PREEMPT_NOTIFIERS=y
  CONFIG_DRM_I915_PREEMPT_TIMEOUT=640
  CONFIG_DEBUG_PREEMPT=y
  # CONFIG_PREEMPT_TRACER is not set
  # CONFIG_PREEMPTIRQ_DELAY_TEST is not set

Before:

  $ cat forkit.c

  #include <sys/types.h>
  #include <unistd.h>
  #include <sys/wait.h>

  int main()
  {
          pid_t child;
          int status = 0;

          child = fork();
          if (child == 0)
                  return 123;
          wait(&status);
          return 0;

}

  $ gcc -o forkit forkit.c
  $ sudo ~/bin/perf record --kcore -a -m,64M -e intel_pt/cyc/k &
  [1] 11016
  $ taskset 2 ./forkit
  $ sudo pkill perf
  $ [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 17.262 MB perf.data ]

  [1]+  Terminated              sudo ~/bin/perf record --kcore -a -m,64M -e intel_pt/cyc/k
  $ sudo ~/bin/perf script --show-task-events --show-switch-events --itrace=iqqe-o -C 1 --ns | grep -C 2 forkit
  context_switch event has no tid
           taskset 11019 [001] 66663.270045029:          1 instructions:k:  ffffffffb1d9f844 strnlen_user+0xb4 ([kernel.kallsyms])
           taskset 11019 [001] 66663.270201816:          1 instructions:k:  ffffffffb1a83121 unmap_page_range+0x561 ([kernel.kallsyms])
            forkit 11019 [001] 66663.270327553: PERF_RECORD_COMM exec: forkit:11019/11019
            forkit 11019 [001] 66663.270420028:          1 instructions:k:  ffffffffb1db9537 __clear_user+0x27 ([kernel.kallsyms])
            forkit 11019 [001] 66663.270648704:          1 instructions:k:  ffffffffb18829e6 do_user_addr_fault+0xf6 ([kernel.kallsyms])
            forkit 11019 [001] 66663.270833163:          1 instructions:k:  ffffffffb230a825 irqentry_exit_to_user_mode+0x15 ([kernel.kallsyms])
            forkit 11019 [001] 66663.271092359:          1 instructions:k:  ffffffffb1aea3d9 lock_page_memcg+0x9 ([kernel.kallsyms])
            forkit 11019 [001] 66663.271207092: PERF_RECORD_FORK(11020:11020):(11019:11019)
            forkit 11019 [001] 66663.271234775: PERF_RECORD_SWITCH_CPU_WIDE OUT          next pid/tid: 11020/11020
            forkit 11020 [001] 66663.271238407: PERF_RECORD_SWITCH_CPU_WIDE IN           prev pid/tid: 11019/11019
            forkit 11020 [001] 66663.271312066:          1 instructions:k:  ffffffffb1a88140 handle_mm_fault+0x10 ([kernel.kallsyms])
            forkit 11020 [001] 66663.271476225: PERF_RECORD_EXIT(11020:11020):(11019:11019)
            forkit 11020 [001] 66663.271497488: PERF_RECORD_SWITCH_CPU_WIDE OUT preempt  next pid/tid: 11019/11019
            forkit 11019 [001] 66663.271500523: PERF_RECORD_SWITCH_CPU_WIDE IN           prev pid/tid: 11020/11020
            forkit 11019 [001] 66663.271517241:          1 instructions:k:  ffffffffb24012cd error_entry+0x6d ([kernel.kallsyms])
            forkit 11019 [001] 66663.271664080: PERF_RECORD_EXIT(11019:11019):(1386:1386)

After:

  $ sudo ~/bin/perf script --show-task-events --show-switch-events --itrace=iqqe-o -C 1 --ns | grep -C 2 forkit
           taskset 11019 [001] 66663.270045029:          1 instructions:k:  ffffffffb1d9f844 strnlen_user+0xb4 ([kernel.kallsyms])
           taskset 11019 [001] 66663.270201816:          1 instructions:k:  ffffffffb1a83121 unmap_page_range+0x561 ([kernel.kallsyms])
            forkit 11019 [001] 66663.270327553: PERF_RECORD_COMM exec: forkit:11019/11019
            forkit 11019 [001] 66663.270420028:          1 instructions:k:  ffffffffb1db9537 __clear_user+0x27 ([kernel.kallsyms])
            forkit 11019 [001] 66663.270648704:          1 instructions:k:  ffffffffb18829e6 do_user_addr_fault+0xf6 ([kernel.kallsyms])
            forkit 11019 [001] 66663.270833163:          1 instructions:k:  ffffffffb230a825 irqentry_exit_to_user_mode+0x15 ([kernel.kallsyms])
            forkit 11019 [001] 66663.271092359:          1 instructions:k:  ffffffffb1aea3d9 lock_page_memcg+0x9 ([kernel.kallsyms])
            forkit 11019 [001] 66663.271207092: PERF_RECORD_FORK(11020:11020):(11019:11019)
            forkit 11019 [001] 66663.271234775: PERF_RECORD_SWITCH_CPU_WIDE OUT          next pid/tid: 11020/11020
            forkit 11020 [001] 66663.271238407: PERF_RECORD_SWITCH_CPU_WIDE IN           prev pid/tid: 11019/11019
            forkit 11020 [001] 66663.271312066:          1 instructions:k:  ffffffffb1a88140 handle_mm_fault+0x10 ([kernel.kallsyms])
            forkit 11020 [001] 66663.271476225: PERF_RECORD_EXIT(11020:11020):(11019:11019)
            forkit 11020 [001] 66663.271497488: PERF_RECORD_SWITCH_CPU_WIDE OUT preempt  next pid/tid: 11019/11019
            forkit 11019 [001] 66663.271500523: PERF_RECORD_SWITCH_CPU_WIDE IN           prev pid/tid: 11020/11020
            forkit 11019 [001] 66663.271517241:          1 instructions:k:  ffffffffb24012cd error_entry+0x6d ([kernel.kallsyms])
            forkit 11019 [001] 66663.271664080: PERF_RECORD_EXIT(11019:11019):(1386:1386)
            forkit 11019 [001] 66663.271688752: PERF_RECORD_SWITCH_CPU_WIDE OUT          next pid/tid:    -1/-1
               :-1    -1 [001] 66663.271692086: PERF_RECORD_SWITCH_CPU_WIDE IN           prev pid/tid: 11019/11019
                :-1    -1 [001] 66663.271707466:          1 instructions:k:  ffffffffb18eb096 update_load_avg+0x306 ([kernel.kallsyms])

Fixes 86c2786994bd7c ("perf intel-pt: Add support for PERF_RECORD_SWITCH")

Signed-off-by Adrian Hunter <[email protected]>

Cc Andi Kleen <[email protected]>

Cc Jiri Olsa <[email protected]>

Cc Yu-cheng Yu <[email protected]>

Signed-off-by Arnaldo Carvalho de Melo <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 tools/perf/util/intel-pt.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

tools/perf/util/intel-pt.c +4 -4

index e8e05e7838b26..66591e8e26470 100644
@@ -906,6 +906,8 @@ static void intel_pt_set_pid_tid_cpu(struct intel_pt *pt,
 
 	if (queue->tid == -1 || pt->have_sched_switch) {
 		ptq->tid = machine__get_current_tid(pt->machine, ptq->cpu);
+		if (ptq->tid == -1)
+			ptq->pid = -1;
 		thread__zput(ptq->thread);
 	}

@@ -1948,10 +1950,8 @@ static int intel_pt_context_switch(struct intel_pt *pt, union perf_event *event,
 		tid = sample->tid;
 	}
 
-	if (tid == -1) {
-		pr_err("context_switch event has no tid\n");
-		return -EINVAL;
-	}
+	if (tid == -1)
+		intel_pt_log("context_switch event has no tid\n");
 
 	intel_pt_log("context_switch: cpu %d pid %d tid %d time %"PRIu64" tsc %#"PRIx64"\n",
 		     cpu, pid, tid, sample->time, perf_time_to_tsc(sample->time,

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 18:15 UTC #99 lore raw

PATCH 99/191 RDMA/hns: Set the unsupported wr opcode

From: Lijun Ou <[email protected]>

[ Upstream commit 22d3e1ed2cc837af87f76c3c8a4ccf4455e225c5 ]

hip06 does not support IB_WR_LOCAL_INV, so the ps_opcode should be set to an invalid value instead of being left uninitialized.

Fixes 9a4435375cd1 ("IB/hns: Add driver files for hns RoCE driver")

Fixes a2f3d4479fe9 ("RDMA/hns: Avoid unncessary initialization")

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Lijun Ou <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/infiniband/hw/hns/hns_roce_hw_v1.c | 1 -
 1 file changed, 1 deletion(-)

drivers/infiniband/hw/hns/hns_roce_hw_v1.c +0 -1

index 8208c30f03c5a..bdfef9abe8f33 100644
@@ -243,7 +243,6 @@ int hns_roce_v1_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr,
 				ps_opcode = HNS_ROCE_WQE_OPCODE_SEND;
 				break;
 			case IB_WR_LOCAL_INV:
-				break;
 			case IB_WR_ATOMIC_CMP_AND_SWP:
 			case IB_WR_ATOMIC_FETCH_AND_ADD:
 			case IB_WR_LSO:

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 18:15 UTC #100 lore raw

PATCH 100/191 kdb: Fix pager search for multi-line strings

From: Daniel Thompson <[email protected]>

[ Upstream commit d081a6e353168f15e63eb9e9334757f20343319f ]

Currently using forward search doesn't handle multi-line strings correctly. The search routine replaces line breaks with \0 during the search and, for regular searches ("help | grep Common\n"), there is code after the line has been discarded or printed to replace the break character.

However during a pager search ("help\n" followed by "/Common\n") when the string is matched we will immediately return to normal output and the code that should restore the \n becomes unreachable. Fix this by restoring the replaced character when we disable the search mode and update the comment accordingly.

Fixes fb6daa7520f9d ("kdb: Provide forward search at more prompt")

Link https://lore.kernel.org/r/[email protected] open here

Reviewed-by Douglas Anderson <[email protected]>

Signed-off-by Daniel Thompson <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 kernel/debug/kdb/kdb_io.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

kernel/debug/kdb/kdb_io.c +6 -2

index 6a4b41484afe6..b45576ca3b0da 100644
@@ -679,12 +679,16 @@ int vkdb_printf(enum kdb_msgsrc src, const char *fmt, va_list ap)
 			size_avail = sizeof(kdb_buffer) - len;
 			goto kdb_print_out;
 		}
-		if (kdb_grepping_flag >= KDB_GREPPING_FLAG_SEARCH)
+		if (kdb_grepping_flag >= KDB_GREPPING_FLAG_SEARCH) {
 			/*
 			 * This was a interactive search (using '/' at more
-			 * prompt) and it has completed. Clear the flag.
+			 * prompt) and it has completed. Replace the \0 with
+			 * its original value to ensure multi-line strings
+			 * are handled properly, and return to normal mode.
 			 */
+			*cphold = replaced_byte;
 			kdb_grepping_flag = 0;
+		}
 		/*
 		 * at this point the string is a full line and
 		 * should be printed, up to the null.

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 14:14 UTC #101 lore raw

PATCH 101/191 overflow: Include header file with SIZE_MAX declaration

From: Leon Romanovsky <[email protected]>

[ Upstream commit a4947e84f23474803b62a2759b5808147e4e15f9 ]

The various array_size functions use SIZE_MAX define, but missed limits.h causes to failure to compile code that needs overflow.h.

In file included from drivers/infiniband/core/uverbs_std_types_device.c:6:
./include/linux/overflow.h: In function 'array_size':
./include/linux/overflow.h:258:10: error: 'SIZE_MAX' undeclared (first use in this function)

   258 |   return SIZE_MAX;
       |          ^~~~~~~~

Fixes 610b15c50e86 ("overflow.h: Add allocation size calculation helpers")

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Leon Romanovsky <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 include/linux/overflow.h | 1 +
 1 file changed, 1 insertion(+)

include/linux/overflow.h +1 -0

index 40b48e2133cb8..38a47cc62cf3a 100644
@@ -3,6 +3,7 @@
 #define __LINUX_OVERFLOW_H
 
 #include <linux/compiler.h>
+#include <linux/limits.h>
 
 /*
  * In the fallback code below, we need to compute the minimum and

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 14:16 UTC #102 lore raw

PATCH 102/191 powerpc/perf: Exclude pmc5/6 from the irrelevant PMU group constraints

From: Athira Rajeev <[email protected]>

[ Upstream commit 3b6c3adbb2fa42749c3d38cfc4d4d0b7e096bb7b ]

PMU counter support functions enforces event constraints for group of events to check if all events in a group can be monitored. Incase of event codes using PMC5 and PMC6 ( 500fa and 600f4 respectively ), not all constraints are applicable, say the threshold or sample bits. But current code includes pmc5 and pmc6 in some group constraints (like IC_DC Qualifier bits) which is actually not applicable and hence results in those events not getting counted when scheduled along with group of other events. Patch fixes this by excluding PMC5/6 from constraints which are not relevant for it.

Fixes 7ffd948 ("powerpc/perf: factor out power8 pmu functions")

Signed-off-by Athira Rajeev <[email protected]>

Reviewed-by Madhavan Srinivasan <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 arch/powerpc/perf/isa207-common.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

arch/powerpc/perf/isa207-common.c +10 -0

index 7ecea7143e587..dd9f88fed63ce 100644
@@ -275,6 +275,15 @@ int isa207_get_constraint(u64 event, unsigned long *maskp, unsigned long *valp)
 
 		mask  |= CNST_PMC_MASK(pmc);
 		value |= CNST_PMC_VAL(pmc);
+
+		/*
+		 * PMC5 and PMC6 are used to count cycles and instructions and
+		 * they do not support most of the constraint bits. Add a check
+		 * to exclude PMC5/6 from most of the constraints except for
+		 * EBB/BHRB.
+		 */
+		if (pmc >= 5)
+			goto ebb_bhrb;
 	}
 
 	if (pmc <= 4) {

@@ -333,6 +342,7 @@ int isa207_get_constraint(u64 event, unsigned long *maskp, unsigned long *valp)
 		}
 	}
 
+ebb_bhrb:
 	if (!pmc && ebb)
 		/* EBB events must specify the PMC */
 		return -1;

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 14:13 UTC #103 lore raw

PATCH 103/191 powerpc/perf/hv-gpci: Fix starting index value

From: Kajol Jain <[email protected]>

[ Upstream commit 0f9866f7e85765bbda86666df56c92f377c3bc10 ]

Commit 9e9f60108423f ("powerpc/perf/{hv-gpci, hv-common}: generate requests with counters annotated") adds a framework for defining gpci counters.
In this patch, they adds starting_index value as '0xffffffffffffffff'. which is wrong as starting_index is of size 32 bits.

Because of this, incase we try to run hv-gpci event we get error.

In power9 machine:

command#: perf stat -e hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/

          -C 0 -I 1000
event syntax error: '..bie_count_and_time_tlbie_instructions_issued/'
                                  \___ value too big for format, maximum is 4294967295

This patch fix this issue and changes starting_index value to '0xffffffff'

After this patch:

command#: perf stat -e hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/ -C 0 -I 1000

     1.000085786              1,024      hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/
     2.000287818              1,024      hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/
     2.439113909             17,408      hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/

Fixes 9e9f60108423 ("powerpc/perf/{hv-gpci, hv-common}: generate requests with counters annotated")

Signed-off-by Kajol Jain <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 arch/powerpc/perf/hv-gpci-requests.h | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

arch/powerpc/perf/hv-gpci-requests.h +3 -3

index e608f9db12ddc..8965b4463d433 100644
@@ -95,7 +95,7 @@ REQUEST(__field(0,	8,	partition_id)
 
 #define REQUEST_NAME system_performance_capabilities
 #define REQUEST_NUM 0x40
-#define REQUEST_IDX_KIND "starting_index=0xffffffffffffffff"
+#define REQUEST_IDX_KIND "starting_index=0xffffffff"
 #include I(REQUEST_BEGIN)
 REQUEST(__field(0,	1,	perf_collect_privileged)
 	__field(0x1,	1,	capability_mask)

@@ -223,7 +223,7 @@ REQUEST(__field(0,	2, partition_id)
 
 #define REQUEST_NAME system_hypervisor_times
 #define REQUEST_NUM 0xF0
-#define REQUEST_IDX_KIND "starting_index=0xffffffffffffffff"
+#define REQUEST_IDX_KIND "starting_index=0xffffffff"
 #include I(REQUEST_BEGIN)
 REQUEST(__count(0,	8,	time_spent_to_dispatch_virtual_processors)
 	__count(0x8,	8,	time_spent_processing_virtual_processor_timers)

@@ -234,7 +234,7 @@ REQUEST(__count(0,	8,	time_spent_to_dispatch_virtual_processors)
 
 #define REQUEST_NAME system_tlbie_count_and_time
 #define REQUEST_NUM 0xF4
-#define REQUEST_IDX_KIND "starting_index=0xffffffffffffffff"
+#define REQUEST_IDX_KIND "starting_index=0xffffffff"
 #include I(REQUEST_BEGIN)
 REQUEST(__count(0,	8,	tlbie_instructions_issued)
 	/*

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 14:13 UTC #104 lore raw

PATCH 104/191 cpufreq: powernv: Fix frame-size-overflow in powernv_cpufreq_reboot_notifier

From: Srikar Dronamraju <[email protected]>

[ Upstream commit a2d0230b91f7e23ceb5d8fb6a9799f30517ec33a ]

The patch avoids allocating cpufreq_policy on stack hence fixing frame size overflow in 'powernv_cpufreq_reboot_notifier':

drivers/cpufreq/powernv-cpufreq.c: In function powernv_cpufreq_reboot_notifier:
drivers/cpufreq/powernv-cpufreq.c:906:1: error: the frame size of 2064 bytes is larger than 2048 bytes

Fixes cf30af76 ("cpufreq: powernv: Set the cpus to nominal frequency during reboot/kexec")

Signed-off-by Srikar Dronamraju <[email protected]>

Reviewed-by Daniel Axtens <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/cpufreq/powernv-cpufreq.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

drivers/cpufreq/powernv-cpufreq.c +6 -3

index dc81fc2bf8015..56c3d86e5b9de 100644
@@ -846,12 +846,15 @@ static int powernv_cpufreq_reboot_notifier(struct notifier_block *nb,
 				unsigned long action, void *unused)
 {
 	int cpu;
-	struct cpufreq_policy cpu_policy;
+	struct cpufreq_policy *cpu_policy;
 
 	rebooting = true;
 	for_each_online_cpu(cpu) {
-		cpufreq_get_policy(&cpu_policy, cpu);
-		powernv_cpufreq_target_index(&cpu_policy, get_nominal_index());
+		cpu_policy = cpufreq_cpu_get(cpu);
+		if (!cpu_policy)
+			continue;
+		powernv_cpufreq_target_index(cpu_policy, get_nominal_index());
+		cpufreq_cpu_put(cpu_policy);
 	}
 
 	return NOTIFY_DONE;

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 14:17 UTC #105 lore raw

PATCH 105/191 IB/rdmavt: Fix sizeof mismatch

From: Colin Ian King <[email protected]>

[ Upstream commit 8e71f694e0c819db39af2336f16eb9689f1ae53f ]

An incorrect sizeof is being used, struct rvt_ibport ** is not correct, it should be struct rvt_ibport *. Note that since ** is the same size as
* this is not causing any issues. Improve this fix by using sizeof(*rdi->ports) as this allows us to not even reference the type of the pointer. Also remove line breaks as the entire statement can fit on one line.

Link https://lore.kernel.org/r/[email protected] open here

Addresses-Coverity: ("Sizeof not portable (SIZEOF_MISMATCH)")

Fixes ff6acd69518e ("IB/rdmavt: Add device structure allocation")

Signed-off-by Colin Ian King <[email protected]>

Reviewed-by Ira Weiny <[email protected]>

Acked-by Dennis Dalessandro <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/infiniband/sw/rdmavt/vt.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

drivers/infiniband/sw/rdmavt/vt.c +1 -3

index 64bdd442078a1..03a367db38e6d 100644
@@ -97,9 +97,7 @@ struct rvt_dev_info *rvt_alloc_device(size_t size, int nports)
 	if (!rdi)
 		return rdi;
 
-	rdi->ports = kcalloc(nports,
-			     sizeof(struct rvt_ibport **),
-			     GFP_KERNEL);
+	rdi->ports = kcalloc(nports, sizeof(*rdi->ports), GFP_KERNEL);
 	if (!rdi->ports)
 		ib_dealloc_device(&rdi->ibdev);

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 14:14 UTC #106 lore raw

PATCH 106/191 f2fs: wait for sysfs kobject removal before freeing f2fs_sb_info

From: Jamie Iles <[email protected]>

[ Upstream commit ae284d87abade58c8db7760c808f311ef1ce693c ]

syzkaller found that with CONFIG_DEBUG_KOBJECT_RELEASE=y, unmounting an f2fs filesystem could result in the following splat:

kobject: 'loop5' ((____ptrval____)): kobject_release, parent 0000000000000000 (delayed 250)
kobject: 'f2fs_xattr_entry-7:5' ((____ptrval____)): kobject_release, parent 0000000000000000 (delayed 750)

  ------------[ cut here ]------------
  ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x98
  WARNING: CPU: 0 PID: 699 at lib/debugobjects.c:485 debug_print_object+0x180/0x240
  Kernel panic - not syncing: panic_on_warn set ...
  CPU: 0 PID: 699 Comm: syz-executor.5 Tainted: G S                5.9.0-rc8+ #101
  Hardware name: linux,dummy-virt (DT)
  Call trace:
   dump_backtrace+0x0/0x4d8
   show_stack+0x34/0x48
   dump_stack+0x174/0x1f8
   panic+0x360/0x7a0
   __warn+0x244/0x2ec
   report_bug+0x240/0x398
   bug_handler+0x50/0xc0
   call_break_hook+0x160/0x1d8
   brk_handler+0x30/0xc0
   do_debug_exception+0x184/0x340
   el1_dbg+0x48/0xb0
   el1_sync_handler+0x170/0x1c8
   el1_sync+0x80/0x100
   debug_print_object+0x180/0x240
   debug_check_no_obj_freed+0x200/0x430
   slab_free_freelist_hook+0x190/0x210
   kfree+0x13c/0x460
   f2fs_put_super+0x624/0xa58
   generic_shutdown_super+0x120/0x300
   kill_block_super+0x94/0xf8
   kill_f2fs_super+0x244/0x308
   deactivate_locked_super+0x104/0x150
   deactivate_super+0x118/0x148
   cleanup_mnt+0x27c/0x3c0
   __cleanup_mnt+0x28/0x38
   task_work_run+0x10c/0x248
   do_notify_resume+0x9d4/0x1188
   work_pending+0x8/0x34c

Like the error handling for f2fs_register_sysfs(), we need to wait for the kobject to be destroyed before returning to prevent a potential use-after-free.

Fixes bf9e697ecd42 ("f2fs: expose features to sysfs entry")

Cc Jaegeuk Kim <[email protected]>

Cc Chao Yu <[email protected]>

Signed-off-by Jamie Iles <[email protected]>

Reviewed-by Chao Yu <[email protected]>

Signed-off-by Jaegeuk Kim <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 fs/f2fs/sysfs.c | 1 +
 1 file changed, 1 insertion(+)

fs/f2fs/sysfs.c +1 -0

index a55919eec0351..6a13099b3c823 100644
@@ -563,4 +563,5 @@ void f2fs_unregister_sysfs(struct f2fs_sb_info *sbi)
 	}
 	kobject_del(&sbi->s_kobj);
 	kobject_put(&sbi->s_kobj);
+	wait_for_completion(&sbi->s_kobj_unregister);
 }

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 18:05 UTC #107 lore raw

PATCH 107/191 lib/crc32.c: fix trivial typo in preprocessor condition

From: Tobias Jordan <[email protected]>

[ Upstream commit 904542dc56524f921a6bab0639ff6249c01e775f ]

Whether crc32_be needs a lookup table is chosen based on CRC_LE_BITS. Obviously, the _be function should be governed by the _BE_ define.

This probably never pops up as it's hard to come up with a configuration where CRC_BE_BITS isn't the same as CRC_LE_BITS and as nobody is using bitwise CRC anyway.

Fixes 46c5801eaf86 ("crc32: bolt on crc32c")

Signed-off-by Tobias Jordan <[email protected]>

Cc Krzysztof Kozlowski <[email protected]>

Cc Jonathan Corbet <[email protected]>

Cc Mauro Carvalho Chehab <[email protected]>

Link https://lkml.kernel.org/r/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 lib/crc32.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

lib/crc32.c +1 -1

index 6ddc92bc14609..a1ccb4a8a9950 100644
@@ -327,7 +327,7 @@ static inline u32 __pure crc32_be_generic(u32 crc, unsigned char const *p,
 	return crc;
 }
 
-#if CRC_LE_BITS == 1
+#if CRC_BE_BITS == 1
 u32 __pure crc32_be(u32 crc, unsigned char const *p, size_t len)
 {
 	return crc32_be_generic(crc, p, len, NULL, CRCPOLY_BE);

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 18:13 UTC #108 lore raw

PATCH 108/191 ramfs: fix nommu mmap with gaps in the page cache

From: Matthew Wilcox (Oracle) <[email protected]>

[ Upstream commit 50b7d85680086126d7bd91dae81d57d4cb1ab6b7 ]

ramfs needs to check that pages are both physically contiguous and contiguous in the file. If the page cache happens to have, eg, page A for index 0 of the file, no page for index 1, and page A+1 for index 2, then an mmap of the first two pages of the file will succeed when it should fail.

Fixes 642fb4d1f1dd ("[PATCH] NOMMU: Provide shared-writable mmap support on ramfs")

Signed-off-by Matthew Wilcox (Oracle) <[email protected]>

Cc David Howells <[email protected]>

Link https://lkml.kernel.org/r/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 fs/ramfs/file-nommu.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

fs/ramfs/file-nommu.c +1 -1

index 3ac1f23870837..5e1ebbe639ebf 100644
@@ -228,7 +228,7 @@ static unsigned long ramfs_nommu_get_unmapped_area(struct file *file,
 	if (!pages)
 		goto out_free;
 
-	nr = find_get_pages(inode->i_mapping, &pgoff, lpages, pages);
+	nr = find_get_pages_contig(inode->i_mapping, pgoff, lpages, pages);
 	if (nr != lpages)
 		goto out_free_pages; /* leave if some pages were missing */

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 18:13 UTC #109 lore raw

PATCH 109/191 rapidio: fix error handling path

From: Souptick Joarder <[email protected]>

[ Upstream commit fa63f083b3492b5ed5332b8d7c90b03b5ef24a1d ]

rio_dma_transfer() attempts to clamp the return value of pin_user_pages_fast() to be >= 0. However, the attempt fails because nr_pages is overridden a few lines later, and restored to the undesirable -ERRNO value.

The return value is ultimately stored in nr_pages, which in turn is passed to unpin_user_pages(), which expects nr_pages >= 0, else, disaster.

Fix this by fixing the nesting of the assignment to nr_pages: nr_pages should be clamped to zero if pin_user_pages_fast() returns -ERRNO, or set to the return value of pin_user_pages_fast(), otherwise.

[[email protected]: new changelog]

Fixes e8de370188d09 ("rapidio: add mport char device driver")

Signed-off-by Souptick Joarder <[email protected]>

Reviewed-by Ira Weiny <[email protected]>

Reviewed-by John Hubbard <[email protected]>

Cc Matthew Wilcox <[email protected]>

Cc Matt Porter <[email protected]>

Cc Alexandre Bounine <[email protected]>

Cc Gustavo A. R. Silva <[email protected]>

Cc Madhuparna Bhowmik <[email protected]>

Cc Dan Carpenter <[email protected]>

Link https://lkml.kernel.org/r/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/rapidio/devices/rio_mport_cdev.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

drivers/rapidio/devices/rio_mport_cdev.c +7 -6

index f207f8725993c..171d6bcad5bc5 100644
@@ -900,15 +900,16 @@ rio_dma_transfer(struct file *filp, u32 transfer_mode,
 				rmcd_error("get_user_pages_unlocked err=%ld",
 					   pinned);
 				nr_pages = 0;
-			} else
+			} else {
 				rmcd_error("pinned %ld out of %ld pages",
 					   pinned, nr_pages);
+				/*
+				 * Set nr_pages up to mean "how many pages to unpin, in
+				 * the error handler:
+				 */
+				nr_pages = pinned;
+			}
 			ret = -EFAULT;
-			/*
-			 * Set nr_pages up to mean "how many pages to unpin, in
-			 * the error handler:
-			 */
-			nr_pages = pinned;
 			goto err_pg;
 		}

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 14:14 UTC #110 lore raw

PATCH 110/191 rapidio: fix the missed put_device() for rio_mport_add_riodev

From: Jing Xiangfeng <[email protected]>

[ Upstream commit 85094c05eeb47d195a74a25366a2db066f1c9d47 ]

rio_mport_add_riodev() misses to call put_device() when the device already exists. Add the missed function call to fix it.

Fixes e8de370188d0 ("rapidio: add mport char device driver")

Signed-off-by Jing Xiangfeng <[email protected]>

Reviewed-by Dan Carpenter <[email protected]>

Cc Matt Porter <[email protected]>

Cc Alexandre Bounine <[email protected]>

Cc Gustavo A. R. Silva <[email protected]>

Cc John Hubbard <[email protected]>

Cc Kees Cook <[email protected]>

Cc Madhuparna Bhowmik <[email protected]>

Link https://lkml.kernel.org/r/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/rapidio/devices/rio_mport_cdev.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

drivers/rapidio/devices/rio_mport_cdev.c +4 -1

index 171d6bcad5bc5..a87c024d56700 100644
@@ -1739,6 +1739,7 @@ static int rio_mport_add_riodev(struct mport_cdev_priv *priv,
 	struct rio_dev *rdev;
 	struct rio_switch *rswitch = NULL;
 	struct rio_mport *mport;
+	struct device *dev;
 	size_t size;
 	u32 rval;
 	u32 swpinfo = 0;

@@ -1753,8 +1754,10 @@ static int rio_mport_add_riodev(struct mport_cdev_priv *priv,
 	rmcd_debug(RDEV, "name:%s ct:0x%x did:0x%x hc:0x%x", dev_info.name,
 		   dev_info.comptag, dev_info.destid, dev_info.hopcount);
 
-	if (bus_find_device_by_name(&rio_bus_type, NULL, dev_info.name)) {
+	dev = bus_find_device_by_name(&rio_bus_type, NULL, dev_info.name);
+	if (dev) {
 		rmcd_debug(RDEV, "device %s already exists", dev_info.name);
+		put_device(dev);
 		return -EEXIST;
 	}

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 14:16 UTC #111 lore raw

PATCH 111/191 mailbox: avoid timer start from callback

From: Jassi Brar <[email protected]>

[ Upstream commit c7dacf5b0f32957b24ef29df1207dc2cd8307743 ]

If the txdone is done by polling, it is possible for msg_submit() to start the timer while txdone_hrtimer() callback is running. If the timer needs recheduling, it could already be enqueued by the time hrtimer_forward_now() is called, leading hrtimer to loudly complain.

WARNING: CPU: 3 PID: 74 at kernel/time/hrtimer.c:932 hrtimer_forward+0xc4/0x110
CPU: 3 PID: 74 Comm: kworker/u8:1 Not tainted 5.9.0-rc2-00236-gd3520067d01c-dirty #5
Hardware name: Libre Computer AML-S805X-AC (DT)
Workqueue: events_freezable_power_ thermal_zone_device_check
pstate: 20000085 (nzCv daIf -PAN -UAO BTYPE=--)
pc : hrtimer_forward+0xc4/0x110
lr : txdone_hrtimer+0xf8/0x118

[...]

This can be fixed by not starting the timer from the callback path. Which requires the timer reloading as long as any message is queued on the channel, and not just when current tx is not done yet.

Fixes 0cc67945ea59 ("mailbox: switch to hrtimer for tx_complete polling")

Reported-by Da Xue <[email protected]>

Reviewed-by Sudeep Holla <[email protected]>

Tested-by Sudeep Holla <[email protected]>

Acked-by Jerome Brunet <[email protected]>

Tested-by Jerome Brunet <[email protected]>

Signed-off-by Jassi Brar <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/mailbox/mailbox.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

drivers/mailbox/mailbox.c +7 -5

index 055c90b8253cb..10a559cfb7ea3 100644
@@ -85,9 +85,12 @@ static void msg_submit(struct mbox_chan *chan)
 exit:
 	spin_unlock_irqrestore(&chan->lock, flags);
 
-	if (!err && (chan->txdone_method & TXDONE_BY_POLL))
-		/* kick start the timer immediately to avoid delays */
-		hrtimer_start(&chan->mbox->poll_hrt, 0, HRTIMER_MODE_REL);
+	/* kick start the timer immediately to avoid delays */
+	if (!err && (chan->txdone_method & TXDONE_BY_POLL)) {
+		/* but only if not already active */
+		if (!hrtimer_active(&chan->mbox->poll_hrt))
+			hrtimer_start(&chan->mbox->poll_hrt, 0, HRTIMER_MODE_REL);
+	}
 }
 
 static void tx_tick(struct mbox_chan *chan, int r)

@@ -125,11 +128,10 @@ static enum hrtimer_restart txdone_hrtimer(struct hrtimer *hrtimer)
 		struct mbox_chan *chan = &mbox->chans[i];
 
 		if (chan->active_req && chan->cl) {
+			resched = true;
 			txdone = chan->mbox->ops->last_tx_done(chan);
 			if (txdone)
 				tx_tick(chan, 0);
-			else
-				resched = true;
 		}
 	}

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 18:14 UTC #112 lore raw

PATCH 112/191 i2c: rcar: Auto select RESET_CONTROLLER

From: Dirk Behme <[email protected]>

[ Upstream commit 5b9bacf28a973a6b16510493416baeefa2c06289 ]

The i2c-rcar driver utilizes the Generic Reset Controller kernel feature, so select the RESET_CONTROLLER option when the I2C_RCAR option is selected with a Gen3 SoC.

Fixes 2b16fd63059ab9 ("i2c: rcar: handle RXDMA HW behaviour on Gen3")

Signed-off-by Dirk Behme <[email protected]>

Signed-off-by Andy Lowe <[email protected]>

[erosca: Add "if ARCH_RCAR_GEN3" per Wolfram's request]

Signed-off-by Eugeniu Rosca <[email protected]>

Signed-off-by Wolfram Sang <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/i2c/busses/Kconfig | 1 +
 1 file changed, 1 insertion(+)

drivers/i2c/busses/Kconfig +1 -0

index b72a25585d52b..c457f65136f83 100644
@@ -1095,6 +1095,7 @@ config I2C_RCAR
 	depends on HAS_DMA
 	depends on ARCH_RENESAS || COMPILE_TEST
 	select I2C_SLAVE
+	select RESET_CONTROLLER if ARCH_RCAR_GEN3
 	help
 	  If you say yes to this option, support will be included for the
 	  R-Car I2C controller.

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 14:13 UTC #113 lore raw

PATCH 113/191 PCI: iproc: Set affinity mask on MSI interrupts

From: Mark Tomlinson <[email protected]>

[ Upstream commit eb7eacaa5b9e4f665bd08d416c8f88e63d2f123c ]

The core interrupt code expects the irq_set_affinity call to update the effective affinity for the interrupt. This was not being done, so update iproc_msi_irq_set_affinity() to do so.

Link https://lore.kernel.org/r/[email protected] open here

Fixes 3bc2b2348835 ("PCI: iproc: Add iProc PCIe MSI support")

Signed-off-by Mark Tomlinson <[email protected]>

Signed-off-by Lorenzo Pieralisi <[email protected]>

Reviewed-by Ray Jui <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/pci/host/pcie-iproc-msi.c | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

drivers/pci/host/pcie-iproc-msi.c +9 -4

index 2d0f535a2f69a..7e6f7b8504d2f 100644
@@ -217,15 +217,20 @@ static int iproc_msi_irq_set_affinity(struct irq_data *data,
 	struct iproc_msi *msi = irq_data_get_irq_chip_data(data);
 	int target_cpu = cpumask_first(mask);
 	int curr_cpu;
+	int ret;
 
 	curr_cpu = hwirq_to_cpu(msi, data->hwirq);
 	if (curr_cpu == target_cpu)
-		return IRQ_SET_MASK_OK_DONE;
+		ret = IRQ_SET_MASK_OK_DONE;
+	else {
+		/* steer MSI to the target CPU */
+		data->hwirq = hwirq_to_canonical_hwirq(msi, data->hwirq) + target_cpu;
+		ret = IRQ_SET_MASK_OK;
+	}
 
-	/* steer MSI to the target CPU */
-	data->hwirq = hwirq_to_canonical_hwirq(msi, data->hwirq) + target_cpu;
+	irq_data_update_effective_affinity(data, cpumask_of(target_cpu));
 
-	return IRQ_SET_MASK_OK;
+	return ret;
 }
 
 static void iproc_msi_irq_compose_msi_msg(struct irq_data *data,

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 14:13 UTC #114 lore raw

PATCH 114/191 clk: at91: clk-main: update key before writing AT91_CKGR_MOR

From: Claudiu Beznea <[email protected]>

[ Upstream commit 85d071e7f19a6a9abf30476b90b3819642568756 ]

SAMA5D2 datasheet specifies on chapter 33.22.8 (PMC Clock Generator Main Oscillator Register) that writing any value other than 0x37 on KEY field aborts the write operation. Use the key when selecting main clock parent.

Fixes 27cb1c2083373 ("clk: at91: rework main clk implementation")

Signed-off-by Claudiu Beznea <[email protected]>

Reviewed-by Alexandre Belloni <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Stephen Boyd <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/clk/at91/clk-main.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

drivers/clk/at91/clk-main.c +8 -3

index 90988e7a5b47f..2e7da9b379d48 100644
@@ -517,12 +517,17 @@ static int clk_sam9x5_main_set_parent(struct clk_hw *hw, u8 index)
 		return -EINVAL;
 
 	regmap_read(regmap, AT91_CKGR_MOR, &tmp);
-	tmp &= ~MOR_KEY_MASK;
 
 	if (index && !(tmp & AT91_PMC_MOSCSEL))
-		regmap_write(regmap, AT91_CKGR_MOR, tmp | AT91_PMC_MOSCSEL);
+		tmp = AT91_PMC_MOSCSEL;
 	else if (!index && (tmp & AT91_PMC_MOSCSEL))
-		regmap_write(regmap, AT91_CKGR_MOR, tmp & ~AT91_PMC_MOSCSEL);
+		tmp = 0;
+	else
+		return 0;
+
+	regmap_update_bits(regmap, AT91_CKGR_MOR,
+			   AT91_PMC_MOSCSEL | MOR_KEY_MASK,
+			   tmp | AT91_PMC_KEY);
 
 	while (!clk_sam9x5_main_ready(regmap))
 		cpu_relax();

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 18:14 UTC #115 lore raw

PATCH 115/191 clk: bcm2835: add missing release if devm_clk_hw_register fails

From: Navid Emamdoost <[email protected]>

[ Upstream commit f6c992ca7dd4f49042eec61f3fb426c94d901675 ]

In the implementation of bcm2835_register_pll(), the allocated pll is leaked if devm_clk_hw_register() fails to register hw. Release pll if devm_clk_hw_register() fails.

Signed-off-by Navid Emamdoost <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Fixes 41691b8862e2 ("clk: bcm2835: Add support for programming the audio domain clocks")

Signed-off-by Stephen Boyd <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/clk/bcm/clk-bcm2835.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

drivers/clk/bcm/clk-bcm2835.c +3 -1

index 6db4204e5d5d5..98295b9703178 100644
@@ -1354,8 +1354,10 @@ static struct clk_hw *bcm2835_register_pll(struct bcm2835_cprman *cprman,
 	pll->hw.init = &init;
 
 	ret = devm_clk_hw_register(cprman->dev, &pll->hw);
-	if (ret)
+	if (ret) {
+		kfree(pll);
 		return NULL;
+	}
 	return &pll->hw;
 }

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 18:14 UTC #116 lore raw

PATCH 116/191 ext4: limit entries returned when counting fsmap records

Link https://lore.kernel.org/r/20201001222148.GA49520@magnolia open here

From: Darrick J. Wong <[email protected]>

[ Upstream commit af8c53c8bc087459b1aadd4c94805d8272358d79 ]

If userspace asked fsmap to try to count the number of entries, we cannot return more than UINT_MAX entries because fmh_entries is u32. Therefore, stop counting if we hit this limit or else we will waste time to return truncated results.

Fixes 0c9ec4beecac ("ext4: support GETFSMAP ioctls")

Signed-off-by Darrick J. Wong <[email protected]>

Signed-off-by Theodore Ts'o <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 fs/ext4/fsmap.c | 3 +++
 1 file changed, 3 insertions(+)

fs/ext4/fsmap.c +3 -0

index 7ec3408985980..1a4d42a1b161d 100644
@@ -121,6 +121,9 @@ static int ext4_getfsmap_helper(struct super_block *sb,
 
 	/* Are we just counting mappings? */
 	if (info->gfi_head->fmh_count == 0) {
+		if (info->gfi_head->fmh_entries == UINT_MAX)
+			return EXT4_QUERY_RANGE_ABORT;
+
 		if (rec_fsblk > info->gfi_next_fsblk)
 			info->gfi_head->fmh_entries++;

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 14:13 UTC #117 lore raw

PATCH 117/191 vfio/pci: Clear token on bypass registration failure

From: Alex Williamson <[email protected]>

[ Upstream commit 852b1beecb6ff9326f7ca4bc0fe69ae860ebdb9e ]

The eventfd context is used as our irqbypass token, therefore if an eventfd is re-used, our token is the same. The irqbypass code will return an -EBUSY in this case, but we'll still attempt to unregister the producer, where if that duplicate token still exists, results in removing the wrong object. Clear the token of failed producers so that they harmlessly fall out when unregistered.

Fixes 6d7425f109d2 ("vfio: Register/unregister irq_bypass_producer")

Reported-by guomin chen <[email protected]>

Tested-by guomin chen <[email protected]>

Signed-off-by Alex Williamson <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/vfio/pci/vfio_pci_intrs.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

drivers/vfio/pci/vfio_pci_intrs.c +3 -1

index bdfdd506bc588..c989f777bf771 100644
@@ -355,11 +355,13 @@ static int vfio_msi_set_vector_signal(struct vfio_pci_device *vdev,
 	vdev->ctx[vector].producer.token = trigger;
 	vdev->ctx[vector].producer.irq = irq;
 	ret = irq_bypass_register_producer(&vdev->ctx[vector].producer);
-	if (unlikely(ret))
+	if (unlikely(ret)) {
 		dev_info(&pdev->dev,
 		"irq bypass producer (token %p) registration fails: %d\n",
 		vdev->ctx[vector].producer.token, ret);
 
+		vdev->ctx[vector].producer.token = NULL;
+	}
 	vdev->ctx[vector].trigger = trigger;
 
 	return 0;

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 14:17 UTC #118 lore raw

PATCH 118/191 vfio iommu type1: Fix memory leak in vfio_iommu_type1_pin_pages

From: Xiaoyang Xu <[email protected]>

[ Upstream commit 2e6cfd496f5b57034cf2aec738799571b5a52124 ]

pfn is not added to pfn_list when vfio_add_to_pfn_list fails. vfio_unpin_page_external will exit directly without calling vfio_iova_put_vfio_pfn. This will lead to a memory leak.

Fixes a54eb55045ae ("vfio iommu type1: Add support for mediated devices")

Signed-off-by Xiaoyang Xu <[email protected]>

[aw: simplified logic, add Fixes]

Signed-off-by Alex Williamson <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/vfio/vfio_iommu_type1.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

drivers/vfio/vfio_iommu_type1.c +2 -1

index 9c8ed9d7f9aa5..bfbe5236239bd 100644
@@ -629,7 +629,8 @@ static int vfio_iommu_type1_pin_pages(void *iommu_data,
 
 		ret = vfio_add_to_pfn_list(dma, iova, phys_pfn[i]);
 		if (ret) {
-			vfio_unpin_page_external(dma, iova, do_accounting);
+			if (put_pfn(phys_pfn[i], dma->prot) && do_accounting)
+				vfio_lock_acct(dma, -1, true);
 			goto pin_unwind;
 		}
 	}

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 18:14 UTC #119 lore raw

PATCH 119/191 Input: imx6ul_tsc - clean up some errors in imx6ul_tsc_resume()

From: Dan Carpenter <[email protected]>

[ Upstream commit 30df23c5ecdfb8da5b0bc17ceef67eff9e1b0957 ]

If imx6ul_tsc_init() fails then we need to clean up the clocks.

I reversed the "if (input_dev->users) {" condition to make the code a bit simpler.

Fixes 6cc527b05847 ("Input: imx6ul_tsc - propagate the errors")

Link https://lore.kernel.org/r/20200905124942.GC183976@mwanda open here

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/input/touchscreen/imx6ul_tsc.c | 27 +++++++++++++++-----------
 1 file changed, 16 insertions(+), 11 deletions(-)

drivers/input/touchscreen/imx6ul_tsc.c +16 ~~-11~~

index ee82a975bfd29..5759c1592a456 100644
@@ -542,20 +542,25 @@ static int __maybe_unused imx6ul_tsc_resume(struct device *dev)
 
 	mutex_lock(&input_dev->mutex);
 
-	if (input_dev->users) {
-		retval = clk_prepare_enable(tsc->adc_clk);
-		if (retval)
-			goto out;
-
-		retval = clk_prepare_enable(tsc->tsc_clk);
-		if (retval) {
-			clk_disable_unprepare(tsc->adc_clk);
-			goto out;
-		}
+	if (!input_dev->users)
+		goto out;
 
-		retval = imx6ul_tsc_init(tsc);
+	retval = clk_prepare_enable(tsc->adc_clk);
+	if (retval)
+		goto out;
+
+	retval = clk_prepare_enable(tsc->tsc_clk);
+	if (retval) {
+		clk_disable_unprepare(tsc->adc_clk);
+		goto out;
 	}
 
+	retval = imx6ul_tsc_init(tsc);
+	if (retval) {
+		clk_disable_unprepare(tsc->tsc_clk);
+		clk_disable_unprepare(tsc->adc_clk);
+		goto out;
+	}
 out:
 	mutex_unlock(&input_dev->mutex);
 	return retval;

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 18:14 UTC #120 lore raw

PATCH 120/191 Input: stmfts - fix a & vs && typo

From: YueHaibing <[email protected]>

[ Upstream commit d04afe14b23651e7a8bc89727a759e982a8458e4 ]

In stmfts_sysfs_hover_enable_write(), we should check value and sdata->hover_enabled is all true.

Fixes 78bcac7b2ae1 ("Input: add support for the STMicroelectronics FingerTip touchscreen")

Signed-off-by YueHaibing <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/input/touchscreen/stmfts.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

drivers/input/touchscreen/stmfts.c +1 -1

index c72662c979e79..d9e93dabbca21 100644
@@ -484,7 +484,7 @@ static ssize_t stmfts_sysfs_hover_enable_write(struct device *dev,
 
 	mutex_lock(&sdata->mutex);
 
-	if (value & sdata->hover_enabled)
+	if (value && sdata->hover_enabled)
 		goto out;
 
 	if (sdata->running)

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 18:14 UTC #121 lore raw

PATCH 121/191 Input: ep93xx_keypad - fix handling of platform_get_irq() error

From: Krzysztof Kozlowski <[email protected]>

[ Upstream commit 7d50f6656dacf085a00beeedbc48b19a37d17881 ]

platform_get_irq() returns -ERRNO on error. In such case comparison to 0 would pass the check.

Fixes 60214f058f44 ("Input: ep93xx_keypad - update driver to new core support")

Signed-off-by Krzysztof Kozlowski <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/input/keyboard/ep93xx_keypad.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

drivers/input/keyboard/ep93xx_keypad.c +2 -2

index f77b295e0123e..01788a78041b3 100644
@@ -257,8 +257,8 @@ static int ep93xx_keypad_probe(struct platform_device *pdev)
 	}
 
 	keypad->irq = platform_get_irq(pdev, 0);
-	if (!keypad->irq) {
-		err = -ENXIO;
+	if (keypad->irq < 0) {
+		err = keypad->irq;
 		goto failed_free;
 	}

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 14:13 UTC #122 lore raw

PATCH 122/191 Input: omap4-keypad - fix handling of platform_get_irq() error

From: Krzysztof Kozlowski <[email protected]>

[ Upstream commit 4738dd1992fa13acfbbd71800c71c612f466fa44 ]

platform_get_irq() returns -ERRNO on error. In such case comparison to 0 would pass the check.

Fixes f3a1ba60dbdb ("Input: omap4-keypad - use platform device helpers")

Signed-off-by Krzysztof Kozlowski <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/input/keyboard/omap4-keypad.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

drivers/input/keyboard/omap4-keypad.c +2 -4

index 616fdd94b0694..5480f1a5658ee 100644
@@ -253,10 +253,8 @@ static int omap4_keypad_probe(struct platform_device *pdev)
 	}
 
 	irq = platform_get_irq(pdev, 0);
-	if (!irq) {
-		dev_err(&pdev->dev, "no keyboard irq assigned\n");
-		return -EINVAL;
-	}
+	if (irq < 0)
+		return irq;
 
 	keypad_data = kzalloc(sizeof(struct omap4_keypad), GFP_KERNEL);
 	if (!keypad_data) {

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 14:13 UTC #123 lore raw

PATCH 123/191 Input: twl4030_keypad - fix handling of platform_get_irq() error

From: Krzysztof Kozlowski <[email protected]>

[ Upstream commit c277e1f0dc3c7d7b5b028e20dd414df241642036 ]

platform_get_irq() returns -ERRNO on error. In such case casting to unsigned and comparing to 0 would pass the check.

Fixes 7abf38d6d13c ("Input: twl4030-keypad - add device tree support")

Reported-by kernel test robot <[email protected]>

Signed-off-by Krzysztof Kozlowski <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/input/keyboard/twl4030_keypad.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

drivers/input/keyboard/twl4030_keypad.c +3 -5

index f9f98ef1d98e3..8677dbe0fd209 100644
@@ -63,7 +63,7 @@ struct twl4030_keypad {
 	bool		autorepeat;
 	unsigned int	n_rows;
 	unsigned int	n_cols;
-	unsigned int	irq;
+	int		irq;
 
 	struct device *dbg_dev;
 	struct input_dev *input;

@@ -389,10 +389,8 @@ static int twl4030_kp_probe(struct platform_device *pdev)
 	}
 
 	kp->irq = platform_get_irq(pdev, 0);
-	if (!kp->irq) {
-		dev_err(&pdev->dev, "no keyboard irq assigned\n");
-		return -EINVAL;
-	}
+	if (kp->irq < 0)
+		return kp->irq;
 
 	error = matrix_keypad_build_keymap(keymap_data, NULL,
 					   TWL4030_MAX_ROWS,

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 18:14 UTC #124 lore raw

PATCH 124/191 Input: sun4i-ps2 - fix handling of platform_get_irq() error

From: Krzysztof Kozlowski <[email protected]>

[ Upstream commit cafb3abea6136e59ea534004e5773361e196bb94 ]

platform_get_irq() returns -ERRNO on error. In such case comparison to 0 would pass the check.

Fixes e443631d20f5 ("Input: serio - add support for Alwinner A10/A20 PS/2 controller")

Signed-off-by Krzysztof Kozlowski <[email protected]>

Acked-by Chen-Yu Tsai <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/input/serio/sun4i-ps2.c | 9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)

drivers/input/serio/sun4i-ps2.c +3 -6

index 04b96fe393397..46512b4d686a8 100644
@@ -210,7 +210,6 @@ static int sun4i_ps2_probe(struct platform_device *pdev)
 	struct sun4i_ps2data *drvdata;
 	struct serio *serio;
 	struct device *dev = &pdev->dev;
-	unsigned int irq;
 	int error;
 
 	drvdata = kzalloc(sizeof(struct sun4i_ps2data), GFP_KERNEL);

@@ -263,14 +262,12 @@ static int sun4i_ps2_probe(struct platform_device *pdev)
 	writel(0, drvdata->reg_base + PS2_REG_GCTL);
 
 	/* Get IRQ for the device */
-	irq = platform_get_irq(pdev, 0);
-	if (!irq) {
-		dev_err(dev, "no IRQ found\n");
-		error = -ENXIO;
+	drvdata->irq = platform_get_irq(pdev, 0);
+	if (drvdata->irq < 0) {
+		error = drvdata->irq;
 		goto err_disable_clk;
 	}
 
-	drvdata->irq = irq;
 	drvdata->serio = serio;
 	drvdata->dev = dev;

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 18:14 UTC #125 lore raw

PATCH 125/191 KVM: x86: emulating RDPID failure shall return #UD rather than #GP

From: Robert Hoo <[email protected]>

[ Upstream commit a9e2e0ae686094571378c72d8146b5a1a92d0652 ]

Per Intel's SDM, RDPID takes a #UD if it is unsupported, which is more or less what KVM is emulating when MSR_TSC_AUX is not available. In fact, there are no scenarios in which RDPID is supposed to #GP.

Fixes fb6d4d340e ("KVM: x86: emulate RDPID")

Signed-off-by Robert Hoo <[email protected]>

Message-Id: <[email protected]>

Reviewed-by Jim Mattson <[email protected]>

Signed-off-by Paolo Bonzini <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 arch/x86/kvm/emulate.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

arch/x86/kvm/emulate.c +1 -1

index 4cc8a4a6f1d00..46559812da24e 100644
@@ -3544,7 +3544,7 @@ static int em_rdpid(struct x86_emulate_ctxt *ctxt)
 	u64 tsc_aux = 0;
 
 	if (ctxt->ops->get_msr(ctxt, MSR_TSC_AUX, &tsc_aux))
-		return emulate_gp(ctxt, 0);
+		return emulate_ud(ctxt);
 	ctxt->dst.val = tsc_aux;
 	return X86EMUL_CONTINUE;
 }

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 14:13 UTC #126 lore raw

PATCH 126/191 memory: omap-gpmc: Fix a couple off by ones

From: Dan Carpenter <[email protected]>

[ Upstream commit 4c54228ac8fd55044195825873c50a524131fa53 ]

These comparisons should be >= instead of > to prevent reading one element beyond the end of the gpmc_cs[] array.

Fixes cdd6928c589a ("ARM: OMAP2+: Add device-tree support for NOR flash")

Fixes f37e4580c409 ("ARM: OMAP2: Dynamic allocator for GPMC memory space")

Link https://lore.kernel.org/r/20200825104707.GB278587@mwanda open here

Acked-by Roger Quadros <[email protected]>

Signed-off-by Krzysztof Kozlowski <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/memory/omap-gpmc.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

drivers/memory/omap-gpmc.c +2 -2

index 7059bbda2faca..cc0da96d07cae 100644
@@ -951,7 +951,7 @@ static int gpmc_cs_remap(int cs, u32 base)
 	int ret;
 	u32 old_base, size;
 
-	if (cs > gpmc_cs_num) {
+	if (cs >= gpmc_cs_num) {
 		pr_err("%s: requested chip-select is disabled\n", __func__);
 		return -ENODEV;
 	}

@@ -986,7 +986,7 @@ int gpmc_cs_request(int cs, unsigned long size, unsigned long *base)
 	struct resource *res = &gpmc->mem;
 	int r = -1;
 
-	if (cs > gpmc_cs_num) {
+	if (cs >= gpmc_cs_num) {
 		pr_err("%s: requested chip-select is disabled\n", __func__);
 		return -ENODEV;
 	}

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 18:14 UTC #127 lore raw

PATCH 127/191 memory: fsl-corenet-cf: Fix handling of platform_get_irq() error

From: Krzysztof Kozlowski <[email protected]>

[ Upstream commit dd85345abca60a8916617e8d75c0f9ce334336dd ]

platform_get_irq() returns -ERRNO on error. In such case comparison to 0 would pass the check.

Fixes 54afbec0d57f ("memory: Freescale CoreNet Coherency Fabric error reporting driver")

Signed-off-by Krzysztof Kozlowski <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/memory/fsl-corenet-cf.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

drivers/memory/fsl-corenet-cf.c +2 -4

index 662d050243bec..2fbf8d09af36b 100644
@@ -215,10 +215,8 @@ static int ccf_probe(struct platform_device *pdev)
 	dev_set_drvdata(&pdev->dev, ccf);
 
 	irq = platform_get_irq(pdev, 0);
-	if (!irq) {
-		dev_err(&pdev->dev, "%s: no irq\n", __func__);
-		return -ENXIO;
-	}
+	if (irq < 0)
+		return irq;
 
 	ret = devm_request_irq(&pdev->dev, irq, ccf_irq, 0, pdev->name, ccf);
 	if (ret) {

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 18:14 UTC #128 lore raw

PATCH 128/191 arm64: dts: qcom: msm8916: Fix MDP/DSI interrupts

From: Stephan Gerhold <[email protected]>

[ Upstream commit 027cca9eb5b450c3f6bb916ba999144c2ec23cb7 ]

The mdss node sets #interrupt-cells = <1>, so its interrupts should be referenced using a single cell (in this case: only the interrupt number).

However, right now the mdp/dsi node both have two interrupt cells set, e.g. interrupts = <4 0>. The 0 is probably meant to say IRQ_TYPE_NONE (= 0), but with #interrupt-cells = <1> this is actually interpreted as a second interrupt line.

Remove the IRQ flags from both interrupts to fix this.

Fixes 305410ffd1b2 ("arm64: dts: msm8916: Add display support")

Signed-off-by Stephan Gerhold <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Bjorn Andersson <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 arch/arm64/boot/dts/qcom/msm8916.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

arch/arm64/boot/dts/qcom/msm8916.dtsi +2 -2

index 3cc449425a038..02b7a44f790b5 100644
@@ -818,7 +818,7 @@ mdp: mdp@1a01000 {
 				reg-names = "mdp_phys";
 
 				interrupt-parent = <&mdss>;
-				interrupts = <0 0>;
+				interrupts = <0>;
 
 				clocks = <&gcc GCC_MDSS_AHB_CLK>,
 					 <&gcc GCC_MDSS_AXI_CLK>,

@@ -850,7 +850,7 @@ dsi0: dsi@1a98000 {
 				reg-names = "dsi_ctrl";
 
 				interrupt-parent = <&mdss>;
-				interrupts = <4 0>;
+				interrupts = <4>;
 
 				assigned-clocks = <&gcc BYTE0_CLK_SRC>,
 						  <&gcc PCLK0_CLK_SRC>;

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 18:13 UTC #129 lore raw

PATCH 129/191 ARM: dts: owl-s500: Fix incorrect PPI interrupt specifiers

From: Cristian Ciocaltea <[email protected]>

[ Upstream commit 55f6c9931f7c32f19cf221211f099dfd8dab3af9 ]

The PPI interrupts for cortex-a9 were incorrectly specified, fix them.

Fixes fdfe7f4f9d85 ("ARM: dts: Add Actions Semi S500 and LeMaker Guitar")

Signed-off-by Cristian Ciocaltea <[email protected]>

Reviewed-by Peter Korsgaard <[email protected]>

Reviewed-by Manivannan Sadhasivam <[email protected]>

Signed-off-by Manivannan Sadhasivam <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 arch/arm/boot/dts/owl-s500.dtsi | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

arch/arm/boot/dts/owl-s500.dtsi +3 -3

index 51a48741d4c01..2557ce026add2 100644
@@ -82,21 +82,21 @@ scu: scu@b0020000 {
 		global_timer: timer@b0020200 {
 			compatible = "arm,cortex-a9-global-timer";
 			reg = <0xb0020200 0x100>;
-			interrupts = <GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
+			interrupts = <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
 			status = "disabled";
 		};
 
 		twd_timer: timer@b0020600 {
 			compatible = "arm,cortex-a9-twd-timer";
 			reg = <0xb0020600 0x20>;
-			interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
+			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
 			status = "disabled";
 		};
 
 		twd_wdt: wdt@b0020620 {
 			compatible = "arm,cortex-a9-twd-wdt";
 			reg = <0xb0020620 0xe0>;
-			interrupts = <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
+			interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
 			status = "disabled";
 		};

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 18:13 UTC #130 lore raw

PATCH 130/191 arm64: dts: zynqmp: Remove additional compatible string for i2c IPs

Link https://lore.kernel.org/r/cc294ae1a79ef845af6809ddb4049f0c0f5bb87a.1598259551.git.michal.simek@xilinx.com open here

From: Michal Simek <[email protected]>

[ Upstream commit 35292518cb0a626fcdcabf739aed75060a018ab5 ]

DT binding permits only one compatible string which was decribed in past by commit 63cab195bf49 ("i2c: removed work arounds in i2c driver for Zynq Ultrascale+ MPSoC").
The commit aea37006e183 ("dt-bindings: i2c: cadence: Migrate i2c-cadence documentation to YAML") has converted binding to yaml and the following issues is reported:
...: i2c@ff030000: compatible: Additional items are not allowed ('cdns,i2c-r1p10' was unexpected)
From schema:
.../Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml fds ...: i2c@ff030000: compatible: ['cdns,i2c-r1p14', 'cdns,i2c-r1p10'] is too long

The commit c415f9e8304a ("ARM64: zynqmp: Fix i2c node's compatible string") has added the second compatible string but without removing origin one. The patch is only keeping one compatible string "cdns,i2c-r1p14".

Fixes c415f9e8304a ("ARM64: zynqmp: Fix i2c node's compatible string")

Signed-off-by Michal Simek <[email protected]>

Reviewed-by Krzysztof Kozlowski <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

arch/arm64/boot/dts/xilinx/zynqmp.dtsi +2 -2

index 7665fbddff280..0531843117f46 100644
@@ -410,7 +410,7 @@ gpio: gpio@ff0a0000 {
 		};
 
 		i2c0: i2c@ff020000 {
-			compatible = "cdns,i2c-r1p14", "cdns,i2c-r1p10";
+			compatible = "cdns,i2c-r1p14";
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 17 4>;

@@ -420,7 +420,7 @@ i2c0: i2c@ff020000 {
 		};
 
 		i2c1: i2c@ff030000 {
-			compatible = "cdns,i2c-r1p14", "cdns,i2c-r1p10";
+			compatible = "cdns,i2c-r1p14";
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 18 4>;

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 14:13 UTC #131 lore raw

PATCH 131/191 powerpc/powernv/dump: Fix race while processing OPAL dump

From: Vasant Hegde <[email protected]>

[ Upstream commit 0a43ae3e2beb77e3481d812834d33abe270768ab ]

Every dump reported by OPAL is exported to userspace through a sysfs interface and notified using kobject_uevent(). The userspace daemon (opal_errd) then reads the dump and acknowledges that the dump is saved safely to disk. Once acknowledged the kernel removes the respective sysfs file entry causing respective resources to be released including kobject.

However it's possible the userspace daemon may already be scanning dump entries when a new sysfs dump entry is created by the kernel. User daemon may read this new entry and ack it even before kernel can notify userspace about it through kobject_uevent() call. If that happens then we have a potential race between dump_ack_store->kobject_put() and kobject_uevent which can lead to use-after-free of a kernfs object resulting in a kernel crash.

This patch fixes this race by protecting the sysfs file creation/notification by holding a reference count on kobject until we safely send kobject_uevent().

The function create_dump_obj() returns the dump object which if used by caller function will end up in use-after-free problem again. However, the return value of create_dump_obj() function isn't being used today and there is no need as well. Hence change it to return void to make this fix complete.

Fixes c7e64b9ce04a ("powerpc/powernv Platform dump interface")

Signed-off-by Vasant Hegde <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 arch/powerpc/platforms/powernv/opal-dump.c | 41 +++++++++++++++-------
 1 file changed, 29 insertions(+), 12 deletions(-)

arch/powerpc/platforms/powernv/opal-dump.c +29 ~~-12~~

index 4c827826c05eb..e21e2c0af69d2 100644
@@ -319,15 +319,14 @@ static ssize_t dump_attr_read(struct file *filep, struct kobject *kobj,
 	return count;
 }
 
-static struct dump_obj *create_dump_obj(uint32_t id, size_t size,
-					uint32_t type)
+static void create_dump_obj(uint32_t id, size_t size, uint32_t type)
 {
 	struct dump_obj *dump;
 	int rc;
 
 	dump = kzalloc(sizeof(*dump), GFP_KERNEL);
 	if (!dump)
-		return NULL;
+		return;
 
 	dump->kobj.kset = dump_kset;

@@ -347,21 +346,39 @@ static struct dump_obj *create_dump_obj(uint32_t id, size_t size,
 	rc = kobject_add(&dump->kobj, NULL, "0x%x-0x%x", type, id);
 	if (rc) {
 		kobject_put(&dump->kobj);
-		return NULL;
+		return;
 	}
 
+	/*
+	 * As soon as the sysfs file for this dump is created/activated there is
+	 * a chance the opal_errd daemon (or any userspace) might read and
+	 * acknowledge the dump before kobject_uevent() is called. If that
+	 * happens then there is a potential race between
+	 * dump_ack_store->kobject_put() and kobject_uevent() which leads to a
+	 * use-after-free of a kernfs object resulting in a kernel crash.
+	 *
+	 * To avoid that, we need to take a reference on behalf of the bin file,
+	 * so that our reference remains valid while we call kobject_uevent().
+	 * We then drop our reference before exiting the function, leaving the
+	 * bin file to drop the last reference (if it hasn't already).
+	 */
+
+	/* Take a reference for the bin file */
+	kobject_get(&dump->kobj);
 	rc = sysfs_create_bin_file(&dump->kobj, &dump->dump_attr);
-	if (rc) {
+	if (rc == 0) {
+		kobject_uevent(&dump->kobj, KOBJ_ADD);
+
+		pr_info("%s: New platform dump. ID = 0x%x Size %u\n",
+			__func__, dump->id, dump->size);
+	} else {
+		/* Drop reference count taken for bin file */
 		kobject_put(&dump->kobj);
-		return NULL;
 	}
 
-	pr_info("%s: New platform dump. ID = 0x%x Size %u\n",
-		__func__, dump->id, dump->size);
-
-	kobject_uevent(&dump->kobj, KOBJ_ADD);
-
-	return dump;
+	/* Drop our reference */
+	kobject_put(&dump->kobj);
+	return;
 }
 
 static irqreturn_t process_dump(int irq, void *data)

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 14:14 UTC #132 lore raw

PATCH 132/191 nvmet: fix uninitialized work for zero kato

From: zhenwei pi <[email protected]>

[ Upstream commit 85bd23f3dc09a2ae9e56885420e52c54bf983713 ]

When connecting a controller with a zero kato value using the following command line

   nvme connect -t tcp -n NQN -a ADDR -s PORT --keep-alive-tmo=0

the warning below can be reproduced:

WARNING: CPU: 1 PID: 241 at kernel/workqueue.c:1627 __queue_delayed_work+0x6d/0x90
with trace:
  mod_delayed_work_on+0x59/0x90
  nvmet_update_cc+0xee/0x100 [nvmet]
  nvmet_execute_prop_set+0x72/0x80 [nvmet]
  nvmet_tcp_try_recv_pdu+0x2f7/0x770 [nvmet_tcp]
  nvmet_tcp_io_work+0x63f/0xb2d [nvmet_tcp]
  ...

This is caused by queuing up an uninitialized work. Althrough the keep-alive timer is disabled during allocating the controller (fixed in 0d3b6a8d213a), ka_work still has a chance to run (called by nvmet_start_ctrl).

Fixes 0d3b6a8d213a ("nvmet: Disable keep-alive timer when kato is cleared to 0h")

Signed-off-by zhenwei pi <[email protected]>

Signed-off-by Christoph Hellwig <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/nvme/target/core.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

drivers/nvme/target/core.c +2 -1

index d0be85d0c289a..7d6d30a2d7719 100644
@@ -611,7 +611,8 @@ static void nvmet_start_ctrl(struct nvmet_ctrl *ctrl)
 	 * in case a host died before it enabled the controller.  Hence, simply
 	 * reset the keep alive timer when the controller is enabled.
 	 */
-	mod_delayed_work(system_wq, &ctrl->ka_work, ctrl->kato * HZ);
+	if (ctrl->kato)
+		mod_delayed_work(system_wq, &ctrl->ka_work, ctrl->kato * HZ);
 }
 
 static void nvmet_clear_ctrl(struct nvmet_ctrl *ctrl)

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 14:17 UTC #133 lore raw

PATCH 133/191 NTB: hw: amd: fix an issue about leak system resources

From: Kaige Li <[email protected]>

[ Upstream commit 44a0a3c17919db1498cebb02ecf3cf4abc1ade7b ]

The related system resources were not released when pci_set_dma_mask(), pci_set_consistent_dma_mask(), or pci_iomap() return error in the amd_ntb_init_pci() function. Add pci_release_regions() to fix it.

Fixes a1b3695820aa ("NTB: Add support for AMD PCI-Express Non-Transparent Bridge")

Signed-off-by Kaige Li <[email protected]>

Signed-off-by Jon Mason <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/ntb/hw/amd/ntb_hw_amd.c | 1 +
 1 file changed, 1 insertion(+)

drivers/ntb/hw/amd/ntb_hw_amd.c +1 -0

index f0788aae05c9c..72a7981ef73fb 100644
@@ -1032,6 +1032,7 @@ static int amd_ntb_init_pci(struct amd_ntb_dev *ndev,
 
 err_dma_mask:
 	pci_clear_master(pdev);
+	pci_release_regions(pdev);
 err_pci_regions:
 	pci_disable_device(pdev);
 err_pci_enable:

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 14:14 UTC #134 lore raw

PATCH 134/191 perf: correct SNOOPX field offset

From: Al Grant <[email protected]>

[ Upstream commit f3d301c1f2f5676465cdf3259737ea19cc82731f ]

perf_event.h has macros that define the field offsets in the data_src bitmask in perf records. The SNOOPX and REMOTE offsets were both 37. These are distinct fields, and the bitfield layout in perf_mem_data_src confirms that SNOOPX should be at offset 38.

Fixes 52839e653b5629bd ("perf tools: Add support for printing new mem_info encodings")

Signed-off-by Al Grant <[email protected]>

Signed-off-by Peter Zijlstra (Intel) <[email protected]>

Reviewed-by Andi Kleen <[email protected]>

Link https://lkml.kernel.org/r/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 include/uapi/linux/perf_event.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

include/uapi/linux/perf_event.h +1 -1

index 362493a2f950b..fc72a3839c9dc 100644
@@ -1033,7 +1033,7 @@ union perf_mem_data_src {
 
 #define PERF_MEM_SNOOPX_FWD	0x01 /* forward */
 /* 1 free */
-#define PERF_MEM_SNOOPX_SHIFT	37
+#define PERF_MEM_SNOOPX_SHIFT  38
 
 /* locked instruction */
 #define PERF_MEM_LOCK_NA	0x01 /* not available */

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 14:18 UTC #135 lore raw

PATCH 135/191 i2c: core: Restore acpi_walk_dep_device_list() getting called after registering the ACPI i2c devs

Link https://bugzilla.kernel.org/show_bug.cgi?id=209627

From: Hans de Goede <[email protected]>

[ Upstream commit 8058d69905058ec8f467a120b5ec5bb831ea67f3 ]

Commit 21653a4181ff ("i2c: core: Call i2c_acpi_install_space_handler() before i2c_acpi_register_devices()")'s intention was to only move the acpi_install_address_space_handler() call to the point before where the ACPI declared i2c-children of the adapter where instantiated by i2c_acpi_register_devices().

But i2c_acpi_install_space_handler() had a call to acpi_walk_dep_device_list() hidden (that is I missed it) at the end of it, so as an unwanted side-effect now acpi_walk_dep_device_list() was also being called before i2c_acpi_register_devices().

Move the acpi_walk_dep_device_list() call to the end of i2c_acpi_register_devices(), so that it is once again called *after* the i2c_client-s hanging of the adapter have been created.

This fixes the Microsoft Surface Go 2 hanging at boot.

Fixes 21653a4181ff ("i2c: core: Call i2c_acpi_install_space_handler() before i2c_acpi_register_devices()")

Reported-by Rainer Finke <[email protected]>

Reported-by Kieran Bingham <[email protected]>

Tested-by Kieran Bingham <[email protected]>

Signed-off-by Hans de Goede <[email protected]>

Signed-off-by Wolfram Sang <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/i2c/i2c-core-acpi.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

drivers/i2c/i2c-core-acpi.c +10 -1

index 0d4d5dcf94f39..52ae674ebf5bf 100644
@@ -219,6 +219,7 @@ static acpi_status i2c_acpi_add_device(acpi_handle handle, u32 level,
 void i2c_acpi_register_devices(struct i2c_adapter *adap)
 {
 	acpi_status status;
+	acpi_handle handle;
 
 	if (!has_acpi_companion(&adap->dev))
 		return;

@@ -229,6 +230,15 @@ void i2c_acpi_register_devices(struct i2c_adapter *adap)
 				     adap, NULL);
 	if (ACPI_FAILURE(status))
 		dev_warn(&adap->dev, "failed to enumerate I2C slaves\n");
+
+	if (!adap->dev.parent)
+		return;
+
+	handle = ACPI_HANDLE(adap->dev.parent);
+	if (!handle)
+		return;
+
+	acpi_walk_dep_device_list(handle);
 }
 
 const struct acpi_device_id *

@@ -684,7 +694,6 @@ int i2c_acpi_install_space_handler(struct i2c_adapter *adapter)
 		return -ENOMEM;
 	}
 
-	acpi_walk_dep_device_list(handle);
 	return 0;
 }

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 14:14 UTC #136 lore raw

PATCH 136/191 crypto: ccp - fix error handling

From: Pavel Machek <[email protected]>

[ Upstream commit e356c49c6cf0db3f00e1558749170bd56e47652d ]

Fix resource leak in error handling.

Signed-off-by Pavel Machek (CIP) <[email protected]>

Acked-by John Allen <[email protected]>

Signed-off-by Herbert Xu <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/crypto/ccp/ccp-ops.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

drivers/crypto/ccp/ccp-ops.c +1 -1

index 626b643d610eb..20ca9c9e109e0 100644
@@ -1752,7 +1752,7 @@ ccp_run_sha_cmd(struct ccp_cmd_queue *cmd_q, struct ccp_cmd *cmd)
 			break;
 		default:
 			ret = -EINVAL;
-			goto e_ctx;
+			goto e_data;
 		}
 	} else {
 		/* Stash the context */

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 14:15 UTC #137 lore raw

PATCH 137/191 media: firewire: fix memory leak

From: Pavel Machek <[email protected]>

[ Upstream commit b28e32798c78a346788d412f1958f36bb760ec03 ]

Fix memory leak in node_probe.

Signed-off-by Pavel Machek (CIP) <[email protected]>

Signed-off-by Mauro Carvalho Chehab <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/media/firewire/firedtv-fw.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

drivers/media/firewire/firedtv-fw.c +4 -2

index 5d634706a7eaa..382f290c3f4d5 100644
@@ -271,8 +271,10 @@ static int node_probe(struct fw_unit *unit, const struct ieee1394_device_id *id)
 
 	name_len = fw_csr_string(unit->directory, CSR_MODEL,
 				 name, sizeof(name));
-	if (name_len < 0)
-		return name_len;
+	if (name_len < 0) {
+		err = name_len;
+		goto fail_free;
+	}
 	for (i = ARRAY_SIZE(model_names); --i; )
 		if (strlen(model_names[i]) <= name_len &&
 		    strncmp(name, model_names[i], name_len) == 0)

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 18:09 UTC #138 lore raw

PATCH 138/191 media: ati_remote: sanity check for both endpoints

From: Oliver Neukum <[email protected]>

[ Upstream commit a8be80053ea74bd9c3f9a3810e93b802236d6498 ]

If you do sanity checks, you should do them for both endpoints. Hence introduce checking for endpoint type for the output endpoint, too.

Reported-by [email protected]

Signed-off-by Oliver Neukum <[email protected]>

Signed-off-by Sean Young <[email protected]>

Signed-off-by Mauro Carvalho Chehab <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/media/rc/ati_remote.c | 4 ++++
 1 file changed, 4 insertions(+)

drivers/media/rc/ati_remote.c +4 -0

index d0871d60a7231..8e3af398a6c4e 100644
@@ -845,6 +845,10 @@ static int ati_remote_probe(struct usb_interface *interface,
 		err("%s: endpoint_in message size==0? \n", __func__);
 		return -ENODEV;
 	}
+	if (!usb_endpoint_is_int_out(endpoint_out)) {
+		err("%s: Unexpected endpoint_out\n", __func__);
+		return -ENODEV;
+	}
 
 	ati_remote = kzalloc(sizeof (struct ati_remote), GFP_KERNEL);
 	rc_dev = rc_allocate_device(RC_DRIVER_SCANCODE);

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 14:15 UTC #139 lore raw

PATCH 139/191 media: st-delta: Fix reference count leak in delta_run_work

From: Aditya Pakki <[email protected]>

[ Upstream commit 57cc666d36adc7b45e37ba4cd7bc4e44ec4c43d7 ]

delta_run_work() calls delta_get_sync() that increments the reference counter. In case of failure, decrement the reference count by calling delta_put_autosuspend().

Signed-off-by Aditya Pakki <[email protected]>

Signed-off-by Mauro Carvalho Chehab <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/media/platform/sti/delta/delta-v4l2.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

drivers/media/platform/sti/delta/delta-v4l2.c +3 -1

index b2dc3d223a9c9..7c925f309158d 100644
@@ -970,8 +970,10 @@ static void delta_run_work(struct work_struct *work)
 	/* enable the hardware */
 	if (!dec->pm) {
 		ret = delta_get_sync(ctx);
-		if (ret)
+		if (ret) {
+			delta_put_autosuspend(ctx);
 			goto err;
+		}
 	}
 
 	/* decode this access unit */

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 18:09 UTC #140 lore raw

PATCH 140/191 media: sti: Fix reference count leaks

From: Qiushi Wu <[email protected]>

[ Upstream commit 6f4432bae9f2d12fc1815b5e26cc07e69bcad0df ]

Signed-off-by Qiushi Wu <[email protected]>

Signed-off-by Mauro Carvalho Chehab <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/media/platform/sti/hva/hva-hw.c | 2 ++
 1 file changed, 2 insertions(+)

drivers/media/platform/sti/hva/hva-hw.c +2 -0

index ec25bdcfa3d1e..8dce2ccc551cb 100644
@@ -272,6 +272,7 @@ static unsigned long int hva_hw_get_ip_version(struct hva_dev *hva)
 
 	if (pm_runtime_get_sync(dev) < 0) {
 		dev_err(dev, "%s     failed to get pm_runtime\n", HVA_PREFIX);
+		pm_runtime_put_noidle(dev);
 		mutex_unlock(&hva->protect_mutex);
 		return -EFAULT;
 	}

@@ -557,6 +558,7 @@ void hva_hw_dump_regs(struct hva_dev *hva, struct seq_file *s)
 
 	if (pm_runtime_get_sync(dev) < 0) {
 		seq_puts(s, "Cannot wake up IP\n");
+		pm_runtime_put_noidle(dev);
 		mutex_unlock(&hva->protect_mutex);
 		return;
 	}

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 18:09 UTC #141 lore raw

PATCH 141/191 media: exynos4-is: Fix several reference count leaks due to pm_runtime_get_sync

From: Qiushi Wu <[email protected]>

[ Upstream commit 7ef64ceea0008c17e94a8a2c60c5d6d46f481996 ]

On calling pm_runtime_get_sync() the reference count of the device is incremented. In case of failure, decrement the reference count before returning the error.

Signed-off-by Qiushi Wu <[email protected]>

Signed-off-by Mauro Carvalho Chehab <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/media/platform/exynos4-is/fimc-isp.c  | 4 +++-
 drivers/media/platform/exynos4-is/fimc-lite.c | 2 +-
 2 files changed, 4 insertions(+), 2 deletions(-)

drivers/media/platform/exynos4-is/fimc-isp.c +3 -1

index fd793d3ac0725..89989b2961599 100644
@@ -311,8 +311,10 @@ static int fimc_isp_subdev_s_power(struct v4l2_subdev *sd, int on)
 
 	if (on) {
 		ret = pm_runtime_get_sync(&is->pdev->dev);
-		if (ret < 0)
+		if (ret < 0) {
+			pm_runtime_put(&is->pdev->dev);
 			return ret;
+		}
 		set_bit(IS_ST_PWR_ON, &is->state);
 
 		ret = fimc_is_start_firmware(is);

drivers/media/platform/exynos4-is/fimc-lite.c +1 -1

index 4a3c9948ca547..1cdca5ce48439 100644
@@ -480,7 +480,7 @@ static int fimc_lite_open(struct file *file)
 	set_bit(ST_FLITE_IN_USE, &fimc->state);
 	ret = pm_runtime_get_sync(&fimc->pdev->dev);
 	if (ret < 0)
-		goto unlock;
+		goto err_pm;
 
 	ret = v4l2_fh_open(file);
 	if (ret < 0)

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 18:09 UTC #142 lore raw

PATCH 142/191 media: exynos4-is: Fix a reference count leak due to pm_runtime_get_sync

From: Qiushi Wu <[email protected]>

[ Upstream commit c47f7c779ef0458a58583f00c9ed71b7f5a4d0a2 ]

On calling pm_runtime_get_sync() the reference count of the device is incremented. In case of failure, decrement the reference count before returning the error.

Signed-off-by Qiushi Wu <[email protected]>

Signed-off-by Mauro Carvalho Chehab <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/media/platform/exynos4-is/media-dev.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

drivers/media/platform/exynos4-is/media-dev.c +3 -1

index d313f9078e714..24fb0f4b95e18 100644
@@ -479,8 +479,10 @@ static int fimc_md_register_sensor_entities(struct fimc_md *fmd)
 		return -ENXIO;
 
 	ret = pm_runtime_get_sync(fmd->pmf);
-	if (ret < 0)
+	if (ret < 0) {
+		pm_runtime_put(fmd->pmf);
 		return ret;
+	}
 
 	fmd->num_sensors = 0;

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 14:15 UTC #143 lore raw

PATCH 143/191 media: exynos4-is: Fix a reference count leak

From: Qiushi Wu <[email protected]>

[ Upstream commit 64157b2cb1940449e7df2670e85781c690266588 ]

Signed-off-by Qiushi Wu <[email protected]>

Signed-off-by Mauro Carvalho Chehab <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/media/platform/exynos4-is/mipi-csis.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

drivers/media/platform/exynos4-is/mipi-csis.c +3 -1

index 560aadabcb111..040d10df17c97 100644
@@ -513,8 +513,10 @@ static int s5pcsis_s_stream(struct v4l2_subdev *sd, int enable)
 	if (enable) {
 		s5pcsis_clear_counters(state);
 		ret = pm_runtime_get_sync(&state->pdev->dev);
-		if (ret && ret != 1)
+		if (ret && ret != 1) {
+			pm_runtime_put_noidle(&state->pdev->dev);
 			return ret;
+		}
 	}
 
 	mutex_lock(&state->lock);

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 14:18 UTC #144 lore raw

PATCH 144/191 media: vsp1: Fix runtime PM imbalance on error

From: Dinghao Liu <[email protected]>

[ Upstream commit 98fae901c8883640202802174a4bd70a1b9118bd ]

pm_runtime_get_sync() increments the runtime PM usage counter even when it returns an error code. Thus a pairing decrement is needed on the error handling path to keep the counter balanced.

Signed-off-by Dinghao Liu <[email protected]>

Reviewed-by Kieran Bingham <[email protected]>

Reviewed-by Laurent Pinchart <[email protected]>

Signed-off-by Mauro Carvalho Chehab <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/media/platform/vsp1/vsp1_drv.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

drivers/media/platform/vsp1/vsp1_drv.c +8 -3

index eed9516e25e1d..5836fb298de27 100644
@@ -549,7 +549,12 @@ int vsp1_device_get(struct vsp1_device *vsp1)
 	int ret;
 
 	ret = pm_runtime_get_sync(vsp1->dev);
-	return ret < 0 ? ret : 0;
+	if (ret < 0) {
+		pm_runtime_put_noidle(vsp1->dev);
+		return ret;
+	}
+
+	return 0;
 }
 
 /*

@@ -829,12 +834,12 @@ static int vsp1_probe(struct platform_device *pdev)
 	/* Configure device parameters based on the version register. */
 	pm_runtime_enable(&pdev->dev);
 
-	ret = pm_runtime_get_sync(&pdev->dev);
+	ret = vsp1_device_get(vsp1);
 	if (ret < 0)
 		goto done;
 
 	vsp1->version = vsp1_read(vsp1, VI6_IP_VERSION);
-	pm_runtime_put_sync(&pdev->dev);
+	vsp1_device_put(vsp1);
 
 	for (i = 0; i < ARRAY_SIZE(vsp1_device_infos); ++i) {
 		if ((vsp1->version & VI6_IP_VERSION_MODEL_MASK) ==

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 18:05 UTC #145 lore raw

PATCH 145/191 media: platform: s3c-camif: Fix runtime PM imbalance on error

From: Dinghao Liu <[email protected]>

[ Upstream commit dafa3605fe60d5a61239d670919b2a36e712481e ]

pm_runtime_get_sync() increments the runtime PM usage counter even when it returns an error code. Thus a pairing decrement is needed on the error handling path to keep the counter balanced.

Also, call pm_runtime_disable() when pm_runtime_get_sync() returns an error code.

Signed-off-by Dinghao Liu <[email protected]>

Reviewed-by Sylwester Nawrocki <[email protected]>

Signed-off-by Mauro Carvalho Chehab <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/media/platform/s3c-camif/camif-core.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

drivers/media/platform/s3c-camif/camif-core.c +2 -3

index c4ab63986c8f0..95b11f69555c3 100644
@@ -475,7 +475,7 @@ static int s3c_camif_probe(struct platform_device *pdev)
 
 	ret = camif_media_dev_init(camif);
 	if (ret < 0)
-		goto err_alloc;
+		goto err_pm;
 
 	ret = camif_register_sensor(camif);
 	if (ret < 0)

@@ -509,10 +509,9 @@ static int s3c_camif_probe(struct platform_device *pdev)
 	media_device_unregister(&camif->media_dev);
 	media_device_cleanup(&camif->media_dev);
 	camif_unregister_media_entities(camif);
-err_alloc:
+err_pm:
 	pm_runtime_put(dev);
 	pm_runtime_disable(dev);
-err_pm:
 	camif_clk_put(camif);
 err_clk:
 	s3c_camif_unregister_subdev(camif);

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 14:18 UTC #146 lore raw

PATCH 146/191 media: platform: sti: hva: Fix runtime PM imbalance on error

From: Dinghao Liu <[email protected]>

[ Upstream commit d912a1d9e9afe69c6066c1ceb6bfc09063074075 ]

pm_runtime_get_sync() increments the runtime PM usage counter even when it returns an error code. Thus a pairing decrement is needed on the error handling path to keep the counter balanced.

Signed-off-by Dinghao Liu <[email protected]>

Signed-off-by Mauro Carvalho Chehab <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/media/platform/sti/hva/hva-hw.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

drivers/media/platform/sti/hva/hva-hw.c +1 -1

index 8dce2ccc551cb..1185f6b6721e9 100644
@@ -393,7 +393,7 @@ int hva_hw_probe(struct platform_device *pdev, struct hva_dev *hva)
 	ret = pm_runtime_get_sync(dev);
 	if (ret < 0) {
 		dev_err(dev, "%s     failed to set PM\n", HVA_PREFIX);
-		goto err_clk;
+		goto err_pm;
 	}
 
 	/* check IP hardware version */

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 18:13 UTC #147 lore raw

PATCH 147/191 media: bdisp: Fix runtime PM imbalance on error

From: Dinghao Liu <[email protected]>

[ Upstream commit dbd2f2dc025f9be8ae063e4f270099677238f620 ]

pm_runtime_get_sync() increments the runtime PM usage counter even when it returns an error code. Thus a pairing decrement is needed on the error handling path to keep the counter balanced.

Signed-off-by Dinghao Liu <[email protected]>

Reviewed-by Fabien Dessenne <[email protected]>

Signed-off-by Mauro Carvalho Chehab <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/media/platform/sti/bdisp/bdisp-v4l2.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

drivers/media/platform/sti/bdisp/bdisp-v4l2.c +1 -2

index 601ca2b2ecd34..79de7d413cf5e 100644
@@ -1367,7 +1367,7 @@ static int bdisp_probe(struct platform_device *pdev)
 	ret = pm_runtime_get_sync(dev);
 	if (ret < 0) {
 		dev_err(dev, "failed to set PM\n");
-		goto err_dbg;
+		goto err_pm;
 	}
 
 	/* Filters */

@@ -1395,7 +1395,6 @@ static int bdisp_probe(struct platform_device *pdev)
 	bdisp_hw_free_filters(bdisp->dev);
 err_pm:
 	pm_runtime_put(dev);
-err_dbg:
 	bdisp_debugfs_remove(bdisp);
 err_v4l2:
 	v4l2_device_unregister(&bdisp->v4l2_dev);

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 18:13 UTC #148 lore raw

PATCH 148/191 media: media/pci: prevent memory leak in bttv_probe

From: Xiaolong Huang <[email protected]>

[ Upstream commit 7b817585b730665126b45df5508dd69526448bc8 ]

In bttv_probe if some functions such as pci_enable_device, pci_set_dma_mask and request_mem_region fails the allocated
memory for btv should be released.

Signed-off-by Xiaolong Huang <[email protected]>

Signed-off-by Mauro Carvalho Chehab <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/media/pci/bt8xx/bttv-driver.c | 13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)

drivers/media/pci/bt8xx/bttv-driver.c +10 -3

index 227086a2e99c8..9e38c8b3ea762 100644
@@ -4055,11 +4055,13 @@ static int bttv_probe(struct pci_dev *dev, const struct pci_device_id *pci_id)
 	btv->id  = dev->device;
 	if (pci_enable_device(dev)) {
 		pr_warn("%d: Can't enable device\n", btv->c.nr);
-		return -EIO;
+		result = -EIO;
+		goto free_mem;
 	}
 	if (pci_set_dma_mask(dev, DMA_BIT_MASK(32))) {
 		pr_warn("%d: No suitable DMA available\n", btv->c.nr);
-		return -EIO;
+		result = -EIO;
+		goto free_mem;
 	}
 	if (!request_mem_region(pci_resource_start(dev,0),
 				pci_resource_len(dev,0),

@@ -4067,7 +4069,8 @@ static int bttv_probe(struct pci_dev *dev, const struct pci_device_id *pci_id)
 		pr_warn("%d: can't request iomem (0x%llx)\n",
 			btv->c.nr,
 			(unsigned long long)pci_resource_start(dev, 0));
-		return -EBUSY;
+		result = -EBUSY;
+		goto free_mem;
 	}
 	pci_set_master(dev);
 	pci_set_command(dev);

@@ -4253,6 +4256,10 @@ static int bttv_probe(struct pci_dev *dev, const struct pci_device_id *pci_id)
 	release_mem_region(pci_resource_start(btv->c.pci,0),
 			   pci_resource_len(btv->c.pci,0));
 	pci_disable_device(btv->c.pci);
+
+free_mem:
+	bttvs[btv->c.nr] = NULL;
+	kfree(btv);
 	return result;
 }

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 14:14 UTC #149 lore raw

PATCH 149/191 media: uvcvideo: Ensure all probed info is returned to v4l2

From: Adam Goode <[email protected]>

[ Upstream commit 8a652a17e3c005dcdae31b6c8fdf14382a29cbbe ]

bFrameIndex and bFormatIndex can be negotiated by the camera during probing, resulting in the camera choosing a different format than expected. v4l2 can already accommodate such changes, but the code was not updating the proper fields.

Without such a change, v4l2 would potentially interpret the payload incorrectly, causing corrupted output. This was happening on the Elgato HD60 S+, which currently always renegotiates to format 1.

As an aside, the Elgato firmware is buggy and should not be renegotating, but it is still a valid thing for the camera to do. Both macOS and Windows will properly probe and read uncorrupted images from this camera.

With this change, both qv4l2 and chromium can now read uncorrupted video from the Elgato HD60 S+.

[Add blank lines, remove periods at the of messages]

Signed-off-by Adam Goode <[email protected]>

Signed-off-by Laurent Pinchart <[email protected]>

Signed-off-by Mauro Carvalho Chehab <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/media/usb/uvc/uvc_v4l2.c | 30 ++++++++++++++++++++++++++++++
 1 file changed, 30 insertions(+)

drivers/media/usb/uvc/uvc_v4l2.c +30 -0

index 3e7e283a44a8e..644afd55c0f0f 100644
@@ -252,11 +252,41 @@ static int uvc_v4l2_try_format(struct uvc_streaming *stream,
 	if (ret < 0)
 		goto done;
 
+	/* After the probe, update fmt with the values returned from
+	 * negotiation with the device.
+	 */
+	for (i = 0; i < stream->nformats; ++i) {
+		if (probe->bFormatIndex == stream->format[i].index) {
+			format = &stream->format[i];
+			break;
+		}
+	}
+
+	if (i == stream->nformats) {
+		uvc_trace(UVC_TRACE_FORMAT, "Unknown bFormatIndex %u\n",
+			  probe->bFormatIndex);
+		return -EINVAL;
+	}
+
+	for (i = 0; i < format->nframes; ++i) {
+		if (probe->bFrameIndex == format->frame[i].bFrameIndex) {
+			frame = &format->frame[i];
+			break;
+		}
+	}
+
+	if (i == format->nframes) {
+		uvc_trace(UVC_TRACE_FORMAT, "Unknown bFrameIndex %u\n",
+			  probe->bFrameIndex);
+		return -EINVAL;
+	}
+
 	fmt->fmt.pix.width = frame->wWidth;
 	fmt->fmt.pix.height = frame->wHeight;
 	fmt->fmt.pix.field = V4L2_FIELD_NONE;
 	fmt->fmt.pix.bytesperline = uvc_v4l2_get_bytesperline(format, frame);
 	fmt->fmt.pix.sizeimage = probe->dwMaxVideoFrameSize;
+	fmt->fmt.pix.pixelformat = format->fcc;
 	fmt->fmt.pix.colorspace = format->colorspace;
 	fmt->fmt.pix.priv = 0;

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 14:18 UTC #150 lore raw

PATCH 150/191 mmc: sdio: Check for CISTPL_VERS_1 buffer size

From: Pali Rohár <[email protected]>

[ Upstream commit 8ebe2607965d3e2dc02029e8c7dd35fbe508ffd0 ]

Before parsing CISTPL_VERS_1 structure check that its size is at least two bytes to prevent buffer overflow.

Signed-off-by Pali Rohár <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Ulf Hansson <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/mmc/core/sdio_cis.c | 3 +++
 1 file changed, 3 insertions(+)

drivers/mmc/core/sdio_cis.c +3 -0

index f8c372839d244..2ca5cd79018b4 100644
@@ -30,6 +30,9 @@ static int cistpl_vers_1(struct mmc_card *card, struct sdio_func *func,
 	unsigned i, nr_strings;
 	char **buffer, *string;
 
+	if (size < 2)
+		return 0;
+
 	/* Find all null-terminated (including zero length) strings in
 	   the TPLLV1_INFO field. Trailing garbage is ignored. */
 	buf += 2;

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 14:18 UTC #151 lore raw

PATCH 151/191 media: saa7134: avoid a shift overflow

From: Mauro Carvalho Chehab <[email protected]>

[ Upstream commit 15a36aae1ec1c1f17149b6113b92631791830740 ]

As reported by smatch:

	drivers/media/pci/saa7134//saa7134-tvaudio.c:686 saa_dsp_writel() warn: should 'reg << 2' be a 64 bit type?

On a 64-bits Kernel, the shift might be bigger than 32 bits.

In real, this should never happen, but let's shut up the warning.

Signed-off-by Mauro Carvalho Chehab <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/media/pci/saa7134/saa7134-tvaudio.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

drivers/media/pci/saa7134/saa7134-tvaudio.c +2 -1

index 68d400e1e240e..8c3da6f7a60f1 100644
@@ -693,7 +693,8 @@ int saa_dsp_writel(struct saa7134_dev *dev, int reg, u32 value)
 {
 	int err;
 
-	audio_dbg(2, "dsp write reg 0x%x = 0x%06x\n", reg << 2, value);
+	audio_dbg(2, "dsp write reg 0x%x = 0x%06x\n",
+		  (reg << 2) & 0xffffffff, value);
 	err = saa_dsp_wait_bit(dev,SAA7135_DSP_RWSTATE_WRR);
 	if (err < 0)
 		return err;

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 18:12 UTC #152 lore raw

PATCH 152/191 fs: dlm: fix configfs memory leak

From: Alexander Aring <[email protected]>

[ Upstream commit 3d2825c8c6105b0f36f3ff72760799fa2e71420e ]

This patch fixes the following memory detected by kmemleak and umount gfs2 filesystem which removed the last lockspace:

unreferenced object 0xffff9264f482f600 (size 192):
comm "dlm_controld", pid 325, jiffies 4294690276 (age 48.136s) hex dump (first 32 bytes):

    00 00 00 00 00 00 00 00 6e 6f 64 65 73 00 00 00  ........nodes...
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<00000000060481d7>] make_space+0x41/0x130
    [<000000008d905d46>] configfs_mkdir+0x1a2/0x5f0
    [<00000000729502cf>] vfs_mkdir+0x155/0x210
    [<000000000369bcf1>] do_mkdirat+0x6d/0x110
    [<00000000cc478a33>] do_syscall_64+0x33/0x40
    [<00000000ce9ccf01>] entry_SYSCALL_64_after_hwframe+0x44/0xa9

The patch just remembers the "nodes" entry pointer in space as I think it's created as subdirectory when parent "spaces" is created. In function drop_space() we will lost the pointer reference to nds because configfs_remove_default_groups(). However as this subdirectory is always available when "spaces" exists it will just be freed when "spaces" will be freed.

Signed-off-by Alexander Aring <[email protected]>

Signed-off-by David Teigland <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 fs/dlm/config.c | 3 +++
 1 file changed, 3 insertions(+)

fs/dlm/config.c +3 -0

index 7211e826d90df..472f4f835d3e1 100644
@@ -218,6 +218,7 @@ struct dlm_space {
 	struct list_head members;
 	struct mutex members_lock;
 	int members_count;
+	struct dlm_nodes *nds;
 };
 
 struct dlm_comms {

@@ -426,6 +427,7 @@ static struct config_group *make_space(struct config_group *g, const char *name)
 	INIT_LIST_HEAD(&sp->members);
 	mutex_init(&sp->members_lock);
 	sp->members_count = 0;
+	sp->nds = nds;
 	return &sp->group;
 
  fail:

@@ -447,6 +449,7 @@ static void drop_space(struct config_group *g, struct config_item *i)
 static void release_space(struct config_item *i)
 {
 	struct dlm_space *sp = config_item_to_space(i);
+	kfree(sp->nds);
 	kfree(sp);
 }

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 18:11 UTC #153 lore raw

PATCH 153/191 media: venus: core: Fix runtime PM imbalance in venus_probe

From: Dinghao Liu <[email protected]>

[ Upstream commit bbe516e976fce538db96bd2b7287df942faa14a3 ]

pm_runtime_get_sync() increments the runtime PM usage counter even when it returns an error code. Thus a pairing decrement is needed on the error handling path to keep the counter balanced. For other error paths after this call, things are the same.

Fix this by adding pm_runtime_put_noidle() after 'err_runtime_disable' label. But in this case, the error path after pm_runtime_put_sync() will decrease PM usage counter twice. Thus add an extra pm_runtime_get_noresume() in this path to balance PM counter.

Signed-off-by Dinghao Liu <[email protected]>

Signed-off-by Mauro Carvalho Chehab <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/media/platform/qcom/venus/core.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

drivers/media/platform/qcom/venus/core.c +4 -1

index 9360b36b82cd8..0a011b117a6db 100644
@@ -236,8 +236,10 @@ static int venus_probe(struct platform_device *pdev)
 		goto err_dev_unregister;
 
 	ret = pm_runtime_put_sync(dev);
-	if (ret)
+	if (ret) {
+		pm_runtime_get_noresume(dev);
 		goto err_dev_unregister;
+	}
 
 	return 0;

@@ -248,6 +250,7 @@ static int venus_probe(struct platform_device *pdev)
 err_venus_shutdown:
 	venus_shutdown(dev);
 err_runtime_disable:
+	pm_runtime_put_noidle(dev);
 	pm_runtime_set_suspended(dev);
 	pm_runtime_disable(dev);
 	hfi_destroy(core);

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 18:11 UTC #154 lore raw

PATCH 154/191 ntfs: add check for mft record size in superblock

From: Rustam Kovhaev <[email protected]>

[ Upstream commit 4f8c94022f0bc3babd0a124c0a7dcdd7547bd94e ]

Number of bytes allocated for mft record should be equal to the mft record size stored in ntfs superblock as reported by syzbot, userspace might trigger out-of-bounds read by dereferencing ctx->attr in ntfs_attr_find()

Reported-by [email protected]

Signed-off-by Rustam Kovhaev <[email protected]>

Link https://syzkaller.appspot.com/bug?extid=aed06913f36eff9b544e

Tested-by [email protected]

Acked-by Anton Altaparmakov <[email protected]>

Link https://lkml.kernel.org/r/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 fs/ntfs/inode.c | 6 ++++++
 1 file changed, 6 insertions(+)

fs/ntfs/inode.c +6 -0

index 7c410f8794124..2aa073b82d30f 100644
@@ -1844,6 +1844,12 @@ int ntfs_read_inode_mount(struct inode *vi)
 		brelse(bh);
 	}
 
+	if (le32_to_cpu(m->bytes_allocated) != vol->mft_record_size) {
+		ntfs_error(sb, "Incorrect mft record size %u in superblock, should be %u.",
+				le32_to_cpu(m->bytes_allocated), vol->mft_record_size);
+		goto err_out;
+	}
+
 	/* Apply the mst fixups. */
 	if (post_read_mst_fixup((NTFS_RECORD*)m, vol->mft_record_size)) {
 		/* FIXME: Try to use the $MFTMirr now. */

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 14:15 UTC #155 lore raw

PATCH 155/191 mac80211: handle lack of sband->bitrates in rates

From: Thomas Pedersen <[email protected]>

[ Upstream commit 8b783d104e7f40684333d2ec155fac39219beb2f ]

Even though a driver or mac80211 shouldn't produce a legacy bitrate if sband->bitrates doesn't exist, don't crash if that is the case either.

This fixes a kernel panic if station dump is run before last_rate can be updated with a data frame when sband->bitrates is missing (eg. in S1G bands).

Signed-off-by Thomas Pedersen <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Johannes Berg <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 net/mac80211/cfg.c      | 3 ++-
 net/mac80211/sta_info.c | 4 ++++
 2 files changed, 6 insertions(+), 1 deletion(-)

net/mac80211/cfg.c +2 -1

index c883cb67b7311..0b82d8da4ab0a 100644
@@ -661,7 +661,8 @@ void sta_set_rate_info_tx(struct sta_info *sta,
 		u16 brate;
 
 		sband = ieee80211_get_sband(sta->sdata);
-		if (sband) {
+		WARN_ON_ONCE(sband && !sband->bitrates);
+		if (sband && sband->bitrates) {
 			brate = sband->bitrates[rate->idx].bitrate;
 			rinfo->legacy = DIV_ROUND_UP(brate, 1 << shift);
 		}

net/mac80211/sta_info.c +4 -0

index 6af5fda6461ce..2a18687019003 100644
@@ -2004,6 +2004,10 @@ static void sta_stats_decode_rate(struct ieee80211_local *local, u16 rate,
 
 		rinfo->flags = 0;
 		sband = local->hw.wiphy->bands[band];
+
+		if (WARN_ON_ONCE(!sband->bitrates))
+			break;
+
 		brate = sband->bitrates[rate_idx].bitrate;
 		if (rinfo->bw == RATE_INFO_BW_5)
 			shift = 2;

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 14:18 UTC #156 lore raw

PATCH 156/191 PM: hibernate: remove the bogus call to get_gendisk() in software_resume()

From: Christoph Hellwig <[email protected]>

[ Upstream commit 428805c0c5e76ef643b1fbc893edfb636b3d8aef ]

get_gendisk grabs a reference on the disk and file operation, so this code will leak both of them while having absolutely no use for the gendisk itself.

This effectively reverts commit 2df83fa4bce421f ("PM / Hibernate: Use get_gendisk to verify partition if resume_file is integer format")

Signed-off-by Christoph Hellwig <[email protected]>

Signed-off-by Rafael J. Wysocki <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 kernel/power/hibernate.c | 11 -----------
 1 file changed, 11 deletions(-)

kernel/power/hibernate.c +0 ~~-11~~

index 2e65aacfa1162..02df69a8ee3c0 100644
@@ -833,17 +833,6 @@ static int software_resume(void)
 
 	/* Check if the device is there */
 	swsusp_resume_device = name_to_dev_t(resume_file);
-
-	/*
-	 * name_to_dev_t is ineffective to verify parition if resume_file is in
-	 * integer format. (e.g. major:minor)
-	 */
-	if (isdigit(resume_file[0]) && resume_wait) {
-		int partno;
-		while (!get_gendisk(swsusp_resume_device, &partno))
-			msleep(10);
-	}
-
 	if (!swsusp_resume_device) {
 		/*
 		 * Some device discovery might still be in progress; we need

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 18:12 UTC #157 lore raw

PATCH 157/191 scsi: mvumi: Fix error return in mvumi_io_attach()

From: Jing Xiangfeng <[email protected]>

[ Upstream commit 055f15ab2cb4a5cbc4c0a775ef3d0066e0fa9b34 ]

Return PTR_ERR() from the error handling case instead of 0.

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Jing Xiangfeng <[email protected]>

Signed-off-by Martin K. Petersen <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/scsi/mvumi.c | 1 +
 1 file changed, 1 insertion(+)

drivers/scsi/mvumi.c +1 -0

index fe97401ad1927..1fffa301c1b9f 100644
@@ -2439,6 +2439,7 @@ static int mvumi_io_attach(struct mvumi_hba *mhba)
 	if (IS_ERR(mhba->dm_thread)) {
 		dev_err(&mhba->pdev->dev,
 			"failed to create device scan thread\n");
+		ret = PTR_ERR(mhba->dm_thread);
 		mutex_unlock(&mhba->sas_discovery_mutex);
 		goto fail_create_thread;
 	}

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 18:11 UTC #158 lore raw

PATCH 158/191 scsi: target: core: Add CONTROL field for trace events

From: Roman Bolshakov <[email protected]>

[ Upstream commit 7010645ba7256992818b518163f46bd4cdf8002a ]

trace-cmd report doesn't show events from target subsystem because scsi_command_size() leaks through event format string:

[target:target_sequencer_start] function scsi_command_size not defined [target:target_cmd_complete] function scsi_command_size not defined

Addition of scsi_command_size() to plugin_scsi.c in trace-cmd doesn't help because an expression is used inside TP_printk(). trace-cmd event parser doesn't understand minus sign inside [ ]:

Error: expected ']' but read '-'

Rather than duplicating kernel code in plugin_scsi.c, provide a dedicated field for CONTROL byte.

Link https://lore.kernel.org/r/[email protected] open here

Reviewed-by Mike Christie <[email protected]>

Signed-off-by Roman Bolshakov <[email protected]>

Signed-off-by Martin K. Petersen <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 include/scsi/scsi_common.h    |  7 +++++++
 include/trace/events/target.h | 12 ++++++------
 2 files changed, 13 insertions(+), 6 deletions(-)

include/scsi/scsi_common.h +7 -0

index 731ac09ed2313..5b567b43e1b16 100644
@@ -25,6 +25,13 @@ scsi_command_size(const unsigned char *cmnd)
 		scsi_varlen_cdb_length(cmnd) : COMMAND_SIZE(cmnd[0]);
 }
 
+static inline unsigned char
+scsi_command_control(const unsigned char *cmnd)
+{
+	return (cmnd[0] == VARIABLE_LENGTH_CMD) ?
+		cmnd[1] : cmnd[COMMAND_SIZE(cmnd[0]) - 1];
+}
+
 /* Returns a human-readable name for the device */
 extern const char *scsi_device_type(unsigned type);

include/trace/events/target.h +6 -6

index 914a872dd3435..e87a3716b0ac9 100644
@@ -140,6 +140,7 @@ TRACE_EVENT(target_sequencer_start,
 		__field( unsigned int,	opcode		)
 		__field( unsigned int,	data_length	)
 		__field( unsigned int,	task_attribute  )
+		__field( unsigned char,	control		)
 		__array( unsigned char,	cdb, TCM_MAX_COMMAND_SIZE	)
 		__string( initiator,	cmd->se_sess->se_node_acl->initiatorname	)
 	),

@@ -149,6 +150,7 @@ TRACE_EVENT(target_sequencer_start,
 		__entry->opcode		= cmd->t_task_cdb[0];
 		__entry->data_length	= cmd->data_length;
 		__entry->task_attribute	= cmd->sam_task_attr;
+		__entry->control	= scsi_command_control(cmd->t_task_cdb);
 		memcpy(__entry->cdb, cmd->t_task_cdb, TCM_MAX_COMMAND_SIZE);
 		__assign_str(initiator, cmd->se_sess->se_node_acl->initiatorname);
 	),

@@ -158,9 +160,7 @@ TRACE_EVENT(target_sequencer_start,
 		  show_opcode_name(__entry->opcode),
 		  __entry->data_length, __print_hex(__entry->cdb, 16),
 		  show_task_attribute_name(__entry->task_attribute),
-		  scsi_command_size(__entry->cdb) <= 16 ?
-			__entry->cdb[scsi_command_size(__entry->cdb) - 1] :
-			__entry->cdb[1]
+		  __entry->control
 	)
 );

@@ -175,6 +175,7 @@ TRACE_EVENT(target_cmd_complete,
 		__field( unsigned int,	opcode		)
 		__field( unsigned int,	data_length	)
 		__field( unsigned int,	task_attribute  )
+		__field( unsigned char,	control		)
 		__field( unsigned char,	scsi_status	)
 		__field( unsigned char,	sense_length	)
 		__array( unsigned char,	cdb, TCM_MAX_COMMAND_SIZE	)

@@ -187,6 +188,7 @@ TRACE_EVENT(target_cmd_complete,
 		__entry->opcode		= cmd->t_task_cdb[0];
 		__entry->data_length	= cmd->data_length;
 		__entry->task_attribute	= cmd->sam_task_attr;
+		__entry->control	= scsi_command_control(cmd->t_task_cdb);
 		__entry->scsi_status	= cmd->scsi_status;
 		__entry->sense_length	= cmd->scsi_status == SAM_STAT_CHECK_CONDITION ?
 			min(18, ((u8 *) cmd->sense_buffer)[SPC_ADD_SENSE_LEN_OFFSET] + 8) : 0;

@@ -203,9 +205,7 @@ TRACE_EVENT(target_cmd_complete,
 		  show_opcode_name(__entry->opcode),
 		  __entry->data_length, __print_hex(__entry->cdb, 16),
 		  show_task_attribute_name(__entry->task_attribute),
-		  scsi_command_size(__entry->cdb) <= 16 ?
-			__entry->cdb[scsi_command_size(__entry->cdb) - 1] :
-			__entry->cdb[1]
+		  __entry->control
 	)
 );

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 14:15 UTC #159 lore raw

PATCH 159/191 mic: vop: copy data to kernel space then write to io memory

From: Sherry Sun <[email protected]>

[ Upstream commit 675f0ad4046946e80412896436164d172cd92238 ]

Read and write io memory should address align on ARCH ARM. Change to use memcpy_toio to avoid kernel panic caused by the address un-align issue.

Signed-off-by Sherry Sun <[email protected]>

Signed-off-by Joakim Zhang <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Greg Kroah-Hartman <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/misc/mic/vop/vop_vringh.c | 20 ++++++++++++++------
 1 file changed, 14 insertions(+), 6 deletions(-)

drivers/misc/mic/vop/vop_vringh.c +14 -6

index fed992e2c2583..99bde52a3a256 100644
@@ -611,6 +611,7 @@ static int vop_virtio_copy_from_user(struct vop_vdev *vdev, void __user *ubuf,
 	size_t partlen;
 	bool dma = VOP_USE_DMA;
 	int err = 0;
+	size_t offset = 0;
 
 	if (daddr & (dma_alignment - 1)) {
 		vdev->tx_dst_unaligned += len;

@@ -659,13 +660,20 @@ static int vop_virtio_copy_from_user(struct vop_vdev *vdev, void __user *ubuf,
 	 * We are copying to IO below and should ideally use something
 	 * like copy_from_user_toio(..) if it existed.
 	 */
-	if (copy_from_user((void __force *)dbuf, ubuf, len)) {
-		err = -EFAULT;
-		dev_err(vop_dev(vdev), "%s %d err %d\n",
-			__func__, __LINE__, err);
-		goto err;
+	while (len) {
+		partlen = min_t(size_t, len, VOP_INT_DMA_BUF_SIZE);
+
+		if (copy_from_user(vvr->buf, ubuf + offset, partlen)) {
+			err = -EFAULT;
+			dev_err(vop_dev(vdev), "%s %d err %d\n",
+				__func__, __LINE__, err);
+			goto err;
+		}
+		memcpy_toio(dbuf + offset, vvr->buf, partlen);
+		offset += partlen;
+		vdev->out_bytes += partlen;
+		len -= partlen;
 	}
-	vdev->out_bytes += len;
 	err = 0;
 err:
 	vpdev->hw_ops->iounmap(vpdev, dbuf);

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 14:15 UTC #160 lore raw

PATCH 160/191 misc: vop: add round_up(x,4) for vring_size to avoid kernel panic

From: Sherry Sun <[email protected]>

[ Upstream commit cc1a2679865a94b83804822996eed010a50a7c1d ]

Since struct _mic_vring_info and vring are allocated together and follow vring, if the vring_size() is not four bytes aligned, which will cause the start address of struct _mic_vring_info is not four byte aligned. For example, when vring entries is 128, the vring_size() will be 5126 bytes. The _mic_vring_info struct layout in ddr looks like:
0x90002400: 00000000 00390000 EE010000 0000C0FF
Here 0x39 is the avail_idx member, and 0xC0FFEE01 is the magic member.

When EP use ioread32(magic) to reads the magic in RC's share memory, it will cause kernel panic on ARM64 platform due to the cross-byte io read. Here read magic in user space use le32toh(vr0->info->magic) will meet the same issue.
So add round_up(x,4) for vring_size, then the struct _mic_vring_info will store in this way:
0x90002400: 00000000 00000000 00000039 C0FFEE01
Which will avoid kernel panic when read magic in struct _mic_vring_info.

Signed-off-by Sherry Sun <[email protected]>

Signed-off-by Joakim Zhang <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Greg Kroah-Hartman <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/misc/mic/vop/vop_main.c   | 2 +-
 drivers/misc/mic/vop/vop_vringh.c | 4 ++--
 samples/mic/mpssd/mpssd.c         | 4 ++--
 3 files changed, 5 insertions(+), 5 deletions(-)

drivers/misc/mic/vop/vop_main.c +1 -1

index a341938c7e2c6..e7cb57f8ddfe2 100644
@@ -301,7 +301,7 @@ static struct virtqueue *vop_find_vq(struct virtio_device *dev,
 	/* First assign the vring's allocated in host memory */
 	vqconfig = _vop_vq_config(vdev->desc) + index;
 	memcpy_fromio(&config, vqconfig, sizeof(config));
-	_vr_size = vring_size(le16_to_cpu(config.num), MIC_VIRTIO_RING_ALIGN);
+	_vr_size = round_up(vring_size(le16_to_cpu(config.num), MIC_VIRTIO_RING_ALIGN), 4);
 	vr_size = PAGE_ALIGN(_vr_size + sizeof(struct _mic_vring_info));
 	va = vpdev->hw_ops->ioremap(vpdev, le64_to_cpu(config.address),
 			vr_size);

drivers/misc/mic/vop/vop_vringh.c +2 -2

index 99bde52a3a256..49e7a7240469c 100644
@@ -308,7 +308,7 @@ static int vop_virtio_add_device(struct vop_vdev *vdev,
 
 		num = le16_to_cpu(vqconfig[i].num);
 		mutex_init(&vvr->vr_mutex);
-		vr_size = PAGE_ALIGN(vring_size(num, MIC_VIRTIO_RING_ALIGN) +
+		vr_size = PAGE_ALIGN(round_up(vring_size(num, MIC_VIRTIO_RING_ALIGN), 4) +
 			sizeof(struct _mic_vring_info));
 		vr->va = (void *)
 			__get_free_pages(GFP_KERNEL | __GFP_ZERO,

@@ -320,7 +320,7 @@ static int vop_virtio_add_device(struct vop_vdev *vdev,
 			goto err;
 		}
 		vr->len = vr_size;
-		vr->info = vr->va + vring_size(num, MIC_VIRTIO_RING_ALIGN);
+		vr->info = vr->va + round_up(vring_size(num, MIC_VIRTIO_RING_ALIGN), 4);
 		vr->info->magic = cpu_to_le32(MIC_MAGIC + vdev->virtio_id + i);
 		vr_addr = dma_map_single(&vpdev->dev, vr->va, vr_size,
 					 DMA_BIDIRECTIONAL);

samples/mic/mpssd/mpssd.c +2 -2

index 49db1def1721c..84e583ab8fd0c 100644
@@ -414,9 +414,9 @@ mic_virtio_copy(struct mic_info *mic, int fd,
 
 static inline unsigned _vring_size(unsigned int num, unsigned long align)
 {
-	return ((sizeof(struct vring_desc) * num + sizeof(__u16) * (3 + num)
+	return _ALIGN_UP(((sizeof(struct vring_desc) * num + sizeof(__u16) * (3 + num)
 				+ align - 1) & ~(align - 1))
-		+ sizeof(__u16) * 3 + sizeof(struct vring_used_elem) * num;
+		+ sizeof(__u16) * 3 + sizeof(struct vring_used_elem) * num, 4);
 }
 
 /*

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 18:04 UTC #161 lore raw

PATCH 161/191 usb: gadget: function: printer: fix use-after-free in __lock_acquire

From: Zqiang <[email protected]>

[ Upstream commit e8d5f92b8d30bb4ade76494490c3c065e12411b1 ]

Fix this by increase object reference count.

BUG: KASAN: use-after-free in __lock_acquire+0x3fd4/0x4180
kernel/locking/lockdep.c:3831
Read of size 8 at addr ffff8880683b0018 by task syz-executor.0/3377

CPU: 1 PID: 3377 Comm: syz-executor.0 Not tainted 5.6.11 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0xce/0x128 lib/dump_stack.c:118
 print_address_description.constprop.4+0x21/0x3c0 mm/kasan/report.c:374
 __kasan_report+0x131/0x1b0 mm/kasan/report.c:506
 kasan_report+0x12/0x20 mm/kasan/common.c:641
 __asan_report_load8_noabort+0x14/0x20 mm/kasan/generic_report.c:135
 __lock_acquire+0x3fd4/0x4180 kernel/locking/lockdep.c:3831
 lock_acquire+0x127/0x350 kernel/locking/lockdep.c:4488
 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline]
 _raw_spin_lock_irqsave+0x35/0x50 kernel/locking/spinlock.c:159
 printer_ioctl+0x4a/0x110 drivers/usb/gadget/function/f_printer.c:723
 vfs_ioctl fs/ioctl.c:47 [inline]
 ksys_ioctl+0xfb/0x130 fs/ioctl.c:763
 __do_sys_ioctl fs/ioctl.c:772 [inline]
 __se_sys_ioctl fs/ioctl.c:770 [inline]
 __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:770
 do_syscall_64+0x9e/0x510 arch/x86/entry/common.c:294
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x4531a9
Code: ed 60 fc ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48

89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 bb 60 fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007fd14ad72c78 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 000000000073bfa8 RCX: 00000000004531a9
RDX: fffffffffffffff9 RSI: 000000000000009e RDI: 0000000000000003
RBP: 0000000000000003 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000004bbd61
R13: 00000000004d0a98 R14: 00007fd14ad736d4 R15: 00000000ffffffff

Allocated by task 2393:
 save_stack+0x21/0x90 mm/kasan/common.c:72
 set_track mm/kasan/common.c:80 [inline]
 __kasan_kmalloc.constprop.3+0xa7/0xd0 mm/kasan/common.c:515
 kasan_kmalloc+0x9/0x10 mm/kasan/common.c:529
 kmem_cache_alloc_trace+0xfa/0x2d0 mm/slub.c:2813
 kmalloc include/linux/slab.h:555 [inline]
 kzalloc include/linux/slab.h:669 [inline]
 gprinter_alloc+0xa1/0x870 drivers/usb/gadget/function/f_printer.c:1416
 usb_get_function+0x58/0xc0 drivers/usb/gadget/functions.c:61
 config_usb_cfg_link+0x1ed/0x3e0 drivers/usb/gadget/configfs.c:444
 configfs_symlink+0x527/0x11d0 fs/configfs/symlink.c:202
 vfs_symlink+0x33d/0x5b0 fs/namei.c:4201
 do_symlinkat+0x11b/0x1d0 fs/namei.c:4228
 __do_sys_symlinkat fs/namei.c:4242 [inline]
 __se_sys_symlinkat fs/namei.c:4239 [inline]
 __x64_sys_symlinkat+0x73/0xb0 fs/namei.c:4239
 do_syscall_64+0x9e/0x510 arch/x86/entry/common.c:294
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Freed by task 3368:
 save_stack+0x21/0x90 mm/kasan/common.c:72
 set_track mm/kasan/common.c:80 [inline]
 kasan_set_free_info mm/kasan/common.c:337 [inline]
 __kasan_slab_free+0x135/0x190 mm/kasan/common.c:476
 kasan_slab_free+0xe/0x10 mm/kasan/common.c:485
 slab_free_hook mm/slub.c:1444 [inline]
 slab_free_freelist_hook mm/slub.c:1477 [inline]
 slab_free mm/slub.c:3034 [inline]
 kfree+0xf7/0x410 mm/slub.c:3995
 gprinter_free+0x49/0xd0 drivers/usb/gadget/function/f_printer.c:1353
 usb_put_function+0x38/0x50 drivers/usb/gadget/functions.c:87
 config_usb_cfg_unlink+0x2db/0x3b0 drivers/usb/gadget/configfs.c:485
 configfs_unlink+0x3b9/0x7f0 fs/configfs/symlink.c:250
 vfs_unlink+0x287/0x570 fs/namei.c:4073
 do_unlinkat+0x4f9/0x620 fs/namei.c:4137
 __do_sys_unlink fs/namei.c:4184 [inline]
 __se_sys_unlink fs/namei.c:4182 [inline]
 __x64_sys_unlink+0x42/0x50 fs/namei.c:4182
 do_syscall_64+0x9e/0x510 arch/x86/entry/common.c:294
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

The buggy address belongs to the object at ffff8880683b0000
 which belongs to the cache kmalloc-1k of size 1024
The buggy address is located 24 bytes inside of
 1024-byte region [ffff8880683b0000, ffff8880683b0400)
The buggy address belongs to the page:
page:ffffea0001a0ec00 refcount:1 mapcount:0 mapping:ffff88806c00e300
index:0xffff8880683b1800 compound_mapcount: 0
flags: 0x100000000010200(slab|head)
raw: 0100000000010200 0000000000000000 0000000600000001 ffff88806c00e300
raw: ffff8880683b1800 000000008010000a 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Reported-by Kyungtae Kim <[email protected]>

Signed-off-by Zqiang <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/usb/gadget/function/f_printer.c | 16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)

drivers/usb/gadget/function/f_printer.c +14 -2

index e6d4fa5eeff10..b2b43a5518786 100644
@@ -35,6 +35,7 @@
 #include <linux/types.h>
 #include <linux/ctype.h>
 #include <linux/cdev.h>
+#include <linux/kref.h>
 
 #include <asm/byteorder.h>
 #include <linux/io.h>

@@ -68,7 +69,7 @@ struct printer_dev {
 	struct usb_gadget	*gadget;
 	s8			interface;
 	struct usb_ep		*in_ep, *out_ep;
-
+	struct kref             kref;
 	struct list_head	rx_reqs;	/* List of free RX structs */
 	struct list_head	rx_reqs_active;	/* List of Active RX xfers */
 	struct list_head	rx_buffers;	/* List of completed xfers */

@@ -222,6 +223,13 @@ static inline struct usb_endpoint_descriptor *ep_desc(struct usb_gadget *gadget,
 
 /*-------------------------------------------------------------------------*/
 
+static void printer_dev_free(struct kref *kref)
+{
+	struct printer_dev *dev = container_of(kref, struct printer_dev, kref);
+
+	kfree(dev);
+}
+
 static struct usb_request *
 printer_req_alloc(struct usb_ep *ep, unsigned len, gfp_t gfp_flags)
 {

@@ -352,6 +360,7 @@ printer_open(struct inode *inode, struct file *fd)
 
 	spin_unlock_irqrestore(&dev->lock, flags);
 
+	kref_get(&dev->kref);
 	DBG(dev, "printer_open returned %x\n", ret);
 	return ret;
 }

@@ -369,6 +378,7 @@ printer_close(struct inode *inode, struct file *fd)
 	dev->printer_status &= ~PRINTER_SELECTED;
 	spin_unlock_irqrestore(&dev->lock, flags);
 
+	kref_put(&dev->kref, printer_dev_free);
 	DBG(dev, "printer_close\n");
 
 	return 0;

@@ -1354,7 +1364,8 @@ static void gprinter_free(struct usb_function *f)
 	struct f_printer_opts *opts;
 
 	opts = container_of(f->fi, struct f_printer_opts, func_inst);
-	kfree(dev);
+
+	kref_put(&dev->kref, printer_dev_free);
 	mutex_lock(&opts->lock);
 	--opts->refcnt;
 	mutex_unlock(&opts->lock);

@@ -1423,6 +1434,7 @@ static struct usb_function *gprinter_alloc(struct usb_function_instance *fi)
 		return ERR_PTR(-ENOMEM);
 	}
 
+	kref_init(&dev->kref);
 	++opts->refcnt;
 	dev->minor = opts->minor;
 	dev->pnp_string = opts->pnp_string;

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 18:09 UTC #162 lore raw

PATCH 162/191 udf: Limit sparing table size

From: Jan Kara <[email protected]>

[ Upstream commit 44ac6b829c4e173fdf6df18e6dd86aecf9a3dc99 ]

Although UDF standard allows it, we don't support sparing table larger than a single block. Check it during mount so that we don't try to access memory beyond end of buffer.

Reported-by [email protected]

Signed-off-by Jan Kara <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 fs/udf/super.c | 6 ++++++
 1 file changed, 6 insertions(+)

fs/udf/super.c +6 -0

index 51de27685e185..2b8147ecd97fb 100644
@@ -1385,6 +1385,12 @@ static int udf_load_sparable_map(struct super_block *sb,
 			(int)spm->numSparingTables);
 		return -EIO;
 	}
+	if (le32_to_cpu(spm->sizeSparingTable) > sb->s_blocksize) {
+		udf_err(sb, "error loading logical volume descriptor: "
+			"Too big sparing table size (%u)\n",
+			le32_to_cpu(spm->sizeSparingTable));
+		return -EIO;
+	}
 
 	for (i = 0; i < spm->numSparingTables; i++) {
 		loc = le32_to_cpu(spm->locSparingTable[i]);

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 14:15 UTC #163 lore raw

PATCH 163/191 udf: Avoid accessing uninitialized data on failed inode read

From: Jan Kara <[email protected]>

[ Upstream commit 044e2e26f214e5ab26af85faffd8d1e4ec066931 ]

When we fail to read inode, some data accessed in udf_evict_inode() may be uninitialized. Move the accesses to !is_bad_inode() branch.

Reported-by [email protected]

Signed-off-by Jan Kara <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 fs/udf/inode.c | 25 ++++++++++++++-----------
 1 file changed, 14 insertions(+), 11 deletions(-)

fs/udf/inode.c +14 ~~-11~~

index 3c1b54091d6cc..dd57bd446340c 100644
@@ -132,21 +132,24 @@ void udf_evict_inode(struct inode *inode)
 	struct udf_inode_info *iinfo = UDF_I(inode);
 	int want_delete = 0;
 
-	if (!inode->i_nlink && !is_bad_inode(inode)) {
-		want_delete = 1;
-		udf_setsize(inode, 0);
-		udf_update_inode(inode, IS_SYNC(inode));
+	if (!is_bad_inode(inode)) {
+		if (!inode->i_nlink) {
+			want_delete = 1;
+			udf_setsize(inode, 0);
+			udf_update_inode(inode, IS_SYNC(inode));
+		}
+		if (iinfo->i_alloc_type != ICBTAG_FLAG_AD_IN_ICB &&
+		    inode->i_size != iinfo->i_lenExtents) {
+			udf_warn(inode->i_sb,
+				 "Inode %lu (mode %o) has inode size %llu different from extent length %llu. Filesystem need not be standards compliant.\n",
+				 inode->i_ino, inode->i_mode,
+				 (unsigned long long)inode->i_size,
+				 (unsigned long long)iinfo->i_lenExtents);
+		}
 	}
 	truncate_inode_pages_final(&inode->i_data);
 	invalidate_inode_buffers(inode);
 	clear_inode(inode);
-	if (iinfo->i_alloc_type != ICBTAG_FLAG_AD_IN_ICB &&
-	    inode->i_size != iinfo->i_lenExtents) {
-		udf_warn(inode->i_sb, "Inode %lu (mode %o) has inode size %llu different from extent length %llu. Filesystem need not be standards compliant.\n",
-			 inode->i_ino, inode->i_mode,
-			 (unsigned long long)inode->i_size,
-			 (unsigned long long)iinfo->i_lenExtents);
-	}
 	kfree(iinfo->i_ext.i_data);
 	iinfo->i_ext.i_data = NULL;
 	udf_clear_extent_cache(inode);

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 18:09 UTC #164 lore raw

PATCH 164/191 USB: cdc-acm: handle broken union descriptors

From: Johan Hovold <[email protected]>

[ Upstream commit 960c7339de27c6d6fec13b54880501c3576bb08d ]

Handle broken union functional descriptors where the master-interface doesn't exist or where its class is of neither Communication or Data type (as required by the specification) by falling back to "combined-interface" probing.

Note that this still allows for handling union descriptors with switched interfaces.

This specifically makes the Whistler radio scanners TRX series devices work with the driver without adding further quirks to the device-id table.

Reported-by Daniel Caujolle-Bert <[email protected]>

Tested-by Daniel Caujolle-Bert <[email protected]>

Acked-by Oliver Neukum <[email protected]>

Signed-off-by Johan Hovold <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Greg Kroah-Hartman <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/usb/class/cdc-acm.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

drivers/usb/class/cdc-acm.c +12 -0

index b3e4b014a1cc0..dff9860213624 100644
@@ -1287,9 +1287,21 @@ static int acm_probe(struct usb_interface *intf,
 			}
 		}
 	} else {
+		int class = -1;
+
 		data_intf_num = union_header->bSlaveInterface0;
 		control_interface = usb_ifnum_to_if(usb_dev, union_header->bMasterInterface0);
 		data_interface = usb_ifnum_to_if(usb_dev, data_intf_num);
+
+		if (control_interface)
+			class = control_interface->cur_altsetting->desc.bInterfaceClass;
+
+		if (class != USB_CLASS_COMM && class != USB_CLASS_CDC_DATA) {
+			dev_dbg(&intf->dev, "Broken union descriptor, assuming single interface\n");
+			combined_interfaces = 1;
+			control_interface = data_interface = intf;
+			goto look_for_collapsed_interface;
+		}
 	}
 
 	if (!control_interface || !data_interface) {

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 18:09 UTC #165 lore raw

PATCH 165/191 can: flexcan: flexcan_chip_stop(): add error handling and propagate error value

From: Joakim Zhang <[email protected]>

[ Upstream commit 9ad02c7f4f279504bdd38ab706fdc97d5f2b2a9c ]

This patch implements error handling and propagates the error value of flexcan_chip_stop(). This function will be called from flexcan_suspend() in an upcoming patch in some SoCs which support LPSR mode.

Add a new function flexcan_chip_stop_disable_on_error() that tries to disable the chip even in case of errors.

Signed-off-by Joakim Zhang <[email protected]>

[mkl: introduce flexcan_chip_stop_disable_on_error() and use it in flexcan_close()]

Signed-off-by Marc Kleine-Budde <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/net/can/flexcan.c | 34 ++++++++++++++++++++++++++++------
 1 file changed, 28 insertions(+), 6 deletions(-)

drivers/net/can/flexcan.c +28 -6

index 84dd79041285a..94468a883f369 100644
@@ -1055,18 +1055,23 @@ static int flexcan_chip_start(struct net_device *dev)
 	return err;
 }
 
-/* flexcan_chip_stop
+/* __flexcan_chip_stop
  *
- * this functions is entered with clocks enabled
+ * this function is entered with clocks enabled
  */
-static void flexcan_chip_stop(struct net_device *dev)
+static int __flexcan_chip_stop(struct net_device *dev, bool disable_on_error)
 {
 	struct flexcan_priv *priv = netdev_priv(dev);
 	struct flexcan_regs __iomem *regs = priv->regs;
+	int err;
 
 	/* freeze + disable module */
-	flexcan_chip_freeze(priv);
-	flexcan_chip_disable(priv);
+	err = flexcan_chip_freeze(priv);
+	if (err && !disable_on_error)
+		return err;
+	err = flexcan_chip_disable(priv);
+	if (err && !disable_on_error)
+		goto out_chip_unfreeze;
 
 	/* Disable all interrupts */
 	flexcan_write(0, &regs->imask2);

@@ -1076,6 +1081,23 @@ static void flexcan_chip_stop(struct net_device *dev)
 
 	flexcan_transceiver_disable(priv);
 	priv->can.state = CAN_STATE_STOPPED;
+
+	return 0;
+
+ out_chip_unfreeze:
+	flexcan_chip_unfreeze(priv);
+
+	return err;
+}
+
+static inline int flexcan_chip_stop_disable_on_error(struct net_device *dev)
+{
+	return __flexcan_chip_stop(dev, true);
+}
+
+static inline int flexcan_chip_stop(struct net_device *dev)
+{
+	return __flexcan_chip_stop(dev, false);
 }
 
 static int flexcan_open(struct net_device *dev)

@@ -1129,7 +1151,7 @@ static int flexcan_close(struct net_device *dev)
 
 	netif_stop_queue(dev);
 	can_rx_offload_disable(&priv->offload);
-	flexcan_chip_stop(dev);
+	flexcan_chip_stop_disable_on_error(dev);
 
 	free_irq(dev->irq, dev);
 	clk_disable_unprepare(priv->clk_per);

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 18:09 UTC #166 lore raw

PATCH 166/191 ath9k: hif_usb: fix race condition between usb_get_urb() and usb_kill_anchored_urbs()

Link https://syzkaller.appspot.com/bug?id=cabffad18eb74197f84871802fd2c5117b61febf

From: Brooke Basile <[email protected]>

[ Upstream commit 03fb92a432ea5abe5909bca1455b7e44a9380480 ]

Calls to usb_kill_anchored_urbs() after usb_kill_urb() on multiprocessor systems create a race condition in which usb_kill_anchored_urbs() deallocates the URB before the completer callback is called in usb_kill_urb(), resulting in a use-after-free.
To fix this, add proper lock protection to usb_kill_urb() calls that can possibly run concurrently with usb_kill_anchored_urbs().

Reported-by [email protected]

Signed-off-by Brooke Basile <[email protected]>

Signed-off-by Kalle Valo <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/net/wireless/ath/ath9k/hif_usb.c | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

drivers/net/wireless/ath/ath9k/hif_usb.c +19 -0

index e80d509bc5415..ce3a785212740 100644
@@ -447,10 +447,19 @@ static void hif_usb_stop(void *hif_handle)
 	spin_unlock_irqrestore(&hif_dev->tx.tx_lock, flags);
 
 	/* The pending URBs have to be canceled. */
+	spin_lock_irqsave(&hif_dev->tx.tx_lock, flags);
 	list_for_each_entry_safe(tx_buf, tx_buf_tmp,
 				 &hif_dev->tx.tx_pending, list) {
+		usb_get_urb(tx_buf->urb);
+		spin_unlock_irqrestore(&hif_dev->tx.tx_lock, flags);
 		usb_kill_urb(tx_buf->urb);
+		list_del(&tx_buf->list);
+		usb_free_urb(tx_buf->urb);
+		kfree(tx_buf->buf);
+		kfree(tx_buf);
+		spin_lock_irqsave(&hif_dev->tx.tx_lock, flags);
 	}
+	spin_unlock_irqrestore(&hif_dev->tx.tx_lock, flags);
 
 	usb_kill_anchored_urbs(&hif_dev->mgmt_submitted);
 }

@@ -760,27 +769,37 @@ static void ath9k_hif_usb_dealloc_tx_urbs(struct hif_device_usb *hif_dev)
 	struct tx_buf *tx_buf = NULL, *tx_buf_tmp = NULL;
 	unsigned long flags;
 
+	spin_lock_irqsave(&hif_dev->tx.tx_lock, flags);
 	list_for_each_entry_safe(tx_buf, tx_buf_tmp,
 				 &hif_dev->tx.tx_buf, list) {
+		usb_get_urb(tx_buf->urb);
+		spin_unlock_irqrestore(&hif_dev->tx.tx_lock, flags);
 		usb_kill_urb(tx_buf->urb);
 		list_del(&tx_buf->list);
 		usb_free_urb(tx_buf->urb);
 		kfree(tx_buf->buf);
 		kfree(tx_buf);
+		spin_lock_irqsave(&hif_dev->tx.tx_lock, flags);
 	}
+	spin_unlock_irqrestore(&hif_dev->tx.tx_lock, flags);
 
 	spin_lock_irqsave(&hif_dev->tx.tx_lock, flags);
 	hif_dev->tx.flags |= HIF_USB_TX_FLUSH;
 	spin_unlock_irqrestore(&hif_dev->tx.tx_lock, flags);
 
+	spin_lock_irqsave(&hif_dev->tx.tx_lock, flags);
 	list_for_each_entry_safe(tx_buf, tx_buf_tmp,
 				 &hif_dev->tx.tx_pending, list) {
+		usb_get_urb(tx_buf->urb);
+		spin_unlock_irqrestore(&hif_dev->tx.tx_lock, flags);
 		usb_kill_urb(tx_buf->urb);
 		list_del(&tx_buf->list);
 		usb_free_urb(tx_buf->urb);
 		kfree(tx_buf->buf);
 		kfree(tx_buf);
+		spin_lock_irqsave(&hif_dev->tx.tx_lock, flags);
 	}
+	spin_unlock_irqrestore(&hif_dev->tx.tx_lock, flags);
 
 	usb_kill_anchored_urbs(&hif_dev->mgmt_submitted);
 }

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 14:18 UTC #167 lore raw

PATCH 167/191 misc: rtsx: Fix memory leak in rtsx_pci_probe

From: Keita Suzuki <[email protected]>

[ Upstream commit bc28369c6189009b66d9619dd9f09bd8c684bb98 ]

When mfd_add_devices() fail, pcr->slots should also be freed. However, the current implementation does not free the member, leading to a memory leak.

Fix this by adding a new goto label that frees pcr->slots.

Signed-off-by Keita Suzuki <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Greg Kroah-Hartman <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/mfd/rtsx_pcr.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

drivers/mfd/rtsx_pcr.c +3 -1

index 3cf69e5c57035..c9e45b6befacf 100644
@@ -1268,12 +1268,14 @@ static int rtsx_pci_probe(struct pci_dev *pcidev,
 	ret = mfd_add_devices(&pcidev->dev, pcr->id, rtsx_pcr_cells,
 			ARRAY_SIZE(rtsx_pcr_cells), NULL, 0, NULL);
 	if (ret < 0)
-		goto disable_irq;
+		goto free_slots;
 
 	schedule_delayed_work(&pcr->idle_work, msecs_to_jiffies(200));
 
 	return 0;
 
+free_slots:
+	kfree(pcr->slots);
 disable_irq:
 	free_irq(pcr->irq, (void *)pcr);
 disable_msi:

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 18:07 UTC #168 lore raw

PATCH 168/191 reiserfs: only call unlock_new_inode() if I_NEW

From: Eric Biggers <[email protected]>

[ Upstream commit 8859bf2b1278d064a139e3031451524a49a56bd0 ]

unlock_new_inode() is only meant to be called after a new inode has already been inserted into the hash table. But reiserfs_new_inode() can call it even before it has inserted the inode, triggering the WARNING in unlock_new_inode(). Fix this by only calling unlock_new_inode() if the inode has the I_NEW flag set, indicating that it's in the table.

This addresses the syzbot report "WARNING in unlock_new_inode"
(https://syzkaller.appspot.com/bug?extid=187510916eb6a14598f7).

Link https://lore.kernel.org/r/[email protected] open here

Reported-by [email protected]

Signed-off-by Eric Biggers <[email protected]>

Signed-off-by Jan Kara <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 fs/reiserfs/inode.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

fs/reiserfs/inode.c +2 -1

index 4b0fed69e0330..06c4d376b0e39 100644
@@ -2160,7 +2160,8 @@ int reiserfs_new_inode(struct reiserfs_transaction_handle *th,
 out_inserted_sd:
 	clear_nlink(inode);
 	th->t_trans_id = 0;	/* so the caller can't use this handle later */
-	unlock_new_inode(inode); /* OK to do even if we hadn't locked it */
+	if (inode->i_state & I_NEW)
+		unlock_new_inode(inode);
 	iput(inode);
 	return err;
 }

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 18:08 UTC #169 lore raw

PATCH 169/191 xfs: make sure the rt allocator doesnt run off the end

From: Darrick J. Wong <[email protected]>

[ Upstream commit 2a6ca4baed620303d414934aa1b7b0a8e7bab05f ]

There's an overflow bug in the realtime allocator. If the rt volume is large enough to handle a single allocation request that is larger than the maximum bmap extent length and the rt bitmap ends exactly on a bitmap block boundary, it's possible that the near allocator will try to check the freeness of a range that extends past the end of the bitmap. This fails with a corruption error and shuts down the fs.

Therefore, constrain maxlen so that the range scan cannot run off the end of the rt bitmap.

Signed-off-by Darrick J. Wong <[email protected]>

Reviewed-by Christoph Hellwig <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 fs/xfs/xfs_rtalloc.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

fs/xfs/xfs_rtalloc.c +11 -0

index cdcb7235e41ae..7d3b56872e563 100644
@@ -257,6 +257,9 @@ xfs_rtallocate_extent_block(
 		end = XFS_BLOCKTOBIT(mp, bbno + 1) - 1;
 	     i <= end;
 	     i++) {
+		/* Make sure we don't scan off the end of the rt volume. */
+		maxlen = min(mp->m_sb.sb_rextents, i + maxlen) - i;
+
 		/*
 		 * See if there's a free extent of maxlen starting at i.
 		 * If it's not so then next will contain the first non-free.

@@ -448,6 +451,14 @@ xfs_rtallocate_extent_near(
 	 */
 	if (bno >= mp->m_sb.sb_rextents)
 		bno = mp->m_sb.sb_rextents - 1;
+
+	/* Make sure we don't run off the end of the rt volume. */
+	maxlen = min(mp->m_sb.sb_rextents, bno + maxlen) - bno;
+	if (maxlen < minlen) {
+		*rtblock = NULLRTBLOCK;
+		return 0;
+	}
+
 	/*
 	 * Try the exact allocation first.
 	 */

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 14:19 UTC #170 lore raw

PATCH 170/191 usb: ohci: Default to per-port over-current protection

From: Hamish Martin <[email protected]>

[ Upstream commit b77d2a0a223bc139ee8904991b2922d215d02636 ]

Some integrated OHCI controller hubs do not expose all ports of the hub to pins on the SoC. In some cases the unconnected ports generate spurious over-current events. For example the Broadcom 56060/Ranger 2 SoC contains a nominally 3 port hub but only the first port is wired.

Default behaviour for ohci-platform driver is to use global over-current protection mode (AKA "ganged"). This leads to the spurious over-current events affecting all ports in the hub.

We now alter the default to use per-port over-current protection.

This patch results in the following configuration changes depending on quirks:
- For quirk OHCI_QUIRK_SUPERIO no changes. These systems remain set up for ganged power switching and no over-current protection.
- For quirk OHCI_QUIRK_AMD756 or OHCI_QUIRK_HUB_POWER power switching remains at none, while over-current protection is now guaranteed to be set to per-port rather than the previous behaviour where it was either none or global over-current protection depending on the value at function entry.

Acked-by Alan Stern <[email protected]>

Signed-off-by Hamish Martin <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Greg Kroah-Hartman <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/usb/host/ohci-hcd.c | 16 ++++++++++------
 1 file changed, 10 insertions(+), 6 deletions(-)

drivers/usb/host/ohci-hcd.c +10 -6

index 4ea1530257e27..dfc24be376002 100644
@@ -665,20 +665,24 @@ static int ohci_run (struct ohci_hcd *ohci)
 
 	/* handle root hub init quirks ... */
 	val = roothub_a (ohci);
-	val &= ~(RH_A_PSM | RH_A_OCPM);
+	/* Configure for per-port over-current protection by default */
+	val &= ~RH_A_NOCP;
+	val |= RH_A_OCPM;
 	if (ohci->flags & OHCI_QUIRK_SUPERIO) {
-		/* NSC 87560 and maybe others */
+		/* NSC 87560 and maybe others.
+		 * Ganged power switching, no over-current protection.
+		 */
 		val |= RH_A_NOCP;
-		val &= ~(RH_A_POTPGT | RH_A_NPS);
-		ohci_writel (ohci, val, &ohci->regs->roothub.a);
+		val &= ~(RH_A_POTPGT | RH_A_NPS | RH_A_PSM | RH_A_OCPM);
 	} else if ((ohci->flags & OHCI_QUIRK_AMD756) ||
 			(ohci->flags & OHCI_QUIRK_HUB_POWER)) {
 		/* hub power always on; required for AMD-756 and some
-		 * Mac platforms.  ganged overcurrent reporting, if any.
+		 * Mac platforms.
 		 */
 		val |= RH_A_NPS;
-		ohci_writel (ohci, val, &ohci->regs->roothub.a);
 	}
+	ohci_writel(ohci, val, &ohci->regs->roothub.a);
+
 	ohci_writel (ohci, RH_HS_LPSC, &ohci->regs->roothub.status);
 	ohci_writel (ohci, (val & RH_A_NPS) ? 0 : RH_B_PPCM,
 						&ohci->regs->roothub.b);

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 18:05 UTC #171 lore raw

PATCH 171/191 Bluetooth: Only mark socket zapped after unlocking

From: Abhishek Pandit-Subedi <[email protected]>

[ Upstream commit 20ae4089d0afeb24e9ceb026b996bfa55c983cc2 ]

Since l2cap_sock_teardown_cb doesn't acquire the channel lock before setting the socket as zapped, it could potentially race with l2cap_sock_release which frees the socket. Thus, wait until the cleanup is complete before marking the socket as zapped.

This race was reproduced on a JBL GO speaker after the remote device rejected L2CAP connection due to resource unavailability.

Here is a dmesg log with debug logs from a repro of this bug:

[ 3465.424086] Bluetooth: hci_core.c:hci_acldata_packet() hci0 len 16 handle 0x0003 flags 0x0002
[ 3465.424090] Bluetooth: hci_conn.c:hci_conn_enter_active_mode() hcon 00000000cfedd07d mode 0
[ 3465.424094] Bluetooth: l2cap_core.c:l2cap_recv_acldata() conn 000000007eae8952 len 16 flags 0x2
[ 3465.424098] Bluetooth: l2cap_core.c:l2cap_recv_frame() len 12, cid 0x0001
[ 3465.424102] Bluetooth: l2cap_core.c:l2cap_raw_recv() conn 000000007eae8952
[ 3465.424175] Bluetooth: l2cap_core.c:l2cap_sig_channel() code 0x03 len 8 id 0x0c
[ 3465.424180] Bluetooth: l2cap_core.c:l2cap_connect_create_rsp() dcid 0x0045 scid 0x0000 result 0x02 status 0x00
[ 3465.424189] Bluetooth: l2cap_core.c:l2cap_chan_put() chan 000000006acf9bff orig refcnt 4
[ 3465.424196] Bluetooth: l2cap_core.c:l2cap_chan_del() chan 000000006acf9bff, conn 000000007eae8952, err 111, state BT_CONNECT
[ 3465.424203] Bluetooth: l2cap_sock.c:l2cap_sock_teardown_cb() chan 000000006acf9bff state BT_CONNECT
[ 3465.424221] Bluetooth: l2cap_core.c:l2cap_chan_put() chan 000000006acf9bff orig refcnt 3
[ 3465.424226] Bluetooth: hci_core.h:hci_conn_drop() hcon 00000000cfedd07d orig refcnt 6
[ 3465.424234] BUG: spinlock bad magic on CPU#2, kworker/u17:0/159
[ 3465.425626] Bluetooth: hci_sock.c:hci_sock_sendmsg() sock 000000002bb0cb64 sk 00000000a7964053
[ 3465.430330]  lock: 0xffffff804410aac0, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0
[ 3465.430332] Causing a watchdog bite!

Signed-off-by Abhishek Pandit-Subedi <[email protected]>

Reported-by Balakrishna Godavarthi <[email protected]>

Reviewed-by Manish Mandlik <[email protected]>

Signed-off-by Marcel Holtmann <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 net/bluetooth/l2cap_sock.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

net/bluetooth/l2cap_sock.c +4 -3

index 7ff82f97e42cc..f94b14beba2bc 100644
@@ -1342,8 +1342,6 @@ static void l2cap_sock_teardown_cb(struct l2cap_chan *chan, int err)
 
 	parent = bt_sk(sk)->parent;
 
-	sock_set_flag(sk, SOCK_ZAPPED);
-
 	switch (chan->state) {
 	case BT_OPEN:
 	case BT_BOUND:

@@ -1370,8 +1368,11 @@ static void l2cap_sock_teardown_cb(struct l2cap_chan *chan, int err)
 
 		break;
 	}
-
 	release_sock(sk);
+
+	/* Only zap after cleanup to avoid use after free race */
+	sock_set_flag(sk, SOCK_ZAPPED);
+
 }
 
 static void l2cap_sock_state_change_cb(struct l2cap_chan *chan, int state,

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 14:19 UTC #172 lore raw

PATCH 172/191 scsi: ibmvfc: Fix error return in ibmvfc_probe()

From: Jing Xiangfeng <[email protected]>

[ Upstream commit 5e48a084f4e824e1b624d3fd7ddcf53d2ba69e53 ]

Fix to return error code PTR_ERR() from the error handling case instead of 0.

Link https://lore.kernel.org/r/[email protected] open here

Acked-by Tyrel Datwyler <[email protected]>

Signed-off-by Jing Xiangfeng <[email protected]>

Signed-off-by Martin K. Petersen <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/scsi/ibmvscsi/ibmvfc.c | 1 +
 1 file changed, 1 insertion(+)

drivers/scsi/ibmvscsi/ibmvfc.c +1 -0

index 34612add3829f..dbacd9830d3df 100644
@@ -4797,6 +4797,7 @@ static int ibmvfc_probe(struct vio_dev *vdev, const struct vio_device_id *id)
 	if (IS_ERR(vhost->work_thread)) {
 		dev_err(dev, "Couldn't create kernel thread: %ld\n",
 			PTR_ERR(vhost->work_thread));
+		rc = PTR_ERR(vhost->work_thread);
 		goto free_host_mem;
 	}

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 18:05 UTC #173 lore raw

PATCH 173/191 brcmsmac: fix memory leak in wlc_phy_attach_lcnphy

From: Keita Suzuki <[email protected]>

[ Upstream commit f4443293d741d1776b86ed1dd8c4e4285d0775fc ]

When wlc_phy_txpwr_srom_read_lcnphy fails in wlc_phy_attach_lcnphy, the allocated pi->u.pi_lcnphy is leaked, since struct brcms_phy will be freed in the caller function.

Fix this by calling wlc_phy_detach_lcnphy in the error handler of wlc_phy_txpwr_srom_read_lcnphy before returning.

Signed-off-by Keita Suzuki <[email protected]>

Signed-off-by Kalle Valo <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 .../net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c    | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c +3 -1

index 93d4cde0eb313..c9f48ec46f4a1 100644
@@ -5090,8 +5090,10 @@ bool wlc_phy_attach_lcnphy(struct brcms_phy *pi)
 	pi->pi_fptr.radioloftget = wlc_lcnphy_get_radio_loft;
 	pi->pi_fptr.detach = wlc_phy_detach_lcnphy;
 
-	if (!wlc_phy_txpwr_srom_read_lcnphy(pi))
+	if (!wlc_phy_txpwr_srom_read_lcnphy(pi)) {
+		kfree(pi->u.pi_lcnphy);
 		return false;
+	}
 
 	if (LCNREV_IS(pi->pubpi.phy_rev, 1)) {
 		if (pi_lcn->lcnphy_tempsense_option == 3) {

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 18:06 UTC #174 lore raw

PATCH 174/191 rtl8xxxu: prevent potential memory leak

From: Chris Chiu <[email protected]>

[ Upstream commit 86279456a4d47782398d3cb8193f78f672e36cac ]

Free the skb if usb_submit_urb fails on rx_urb. And free the urb no matter usb_submit_urb succeeds or not in rtl8xxxu_submit_int_urb.

Signed-off-by Chris Chiu <[email protected]>

Signed-off-by Kalle Valo <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c +9 -1

index 63f37fa72e4ba..5cf61710ae2f1 100644
@@ -5453,7 +5453,6 @@ static int rtl8xxxu_submit_int_urb(struct ieee80211_hw *hw)
 	ret = usb_submit_urb(urb, GFP_KERNEL);
 	if (ret) {
 		usb_unanchor_urb(urb);
-		usb_free_urb(urb);
 		goto error;
 	}

@@ -5462,6 +5461,7 @@ static int rtl8xxxu_submit_int_urb(struct ieee80211_hw *hw)
 	rtl8xxxu_write32(priv, REG_USB_HIMR, val32);
 
 error:
+	usb_free_urb(urb);
 	return ret;
 }

@@ -5787,6 +5787,7 @@ static int rtl8xxxu_start(struct ieee80211_hw *hw)
 	struct rtl8xxxu_priv *priv = hw->priv;
 	struct rtl8xxxu_rx_urb *rx_urb;
 	struct rtl8xxxu_tx_urb *tx_urb;
+	struct sk_buff *skb;
 	unsigned long flags;
 	int ret, i;

@@ -5837,6 +5838,13 @@ static int rtl8xxxu_start(struct ieee80211_hw *hw)
 		rx_urb->hw = hw;
 
 		ret = rtl8xxxu_submit_rx_urb(priv, rx_urb);
+		if (ret) {
+			if (ret != -ENOMEM) {
+				skb = (struct sk_buff *)rx_urb->urb.context;
+				dev_kfree_skb(skb);
+			}
+			rtl8xxxu_queue_rx_urb(priv, rx_urb);
+		}
 	}
 exit:
 	/*

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 14:19 UTC #175 lore raw

PATCH 175/191 Fix use after free in get_capset_info callback.

Link http://patchwork.freedesktop.org/patch/msgid/[email protected]

From: Doug Horn <[email protected]>

[ Upstream commit e219688fc5c3d0d9136f8d29d7e0498388f01440 ]

If a response to virtio_gpu_cmd_get_capset_info takes longer than five seconds to return, the callback will access freed kernel memory in vg->capsets.

Signed-off-by Doug Horn <[email protected]>

Signed-off-by Gerd Hoffmann <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/gpu/drm/virtio/virtgpu_kms.c |  2 ++
 drivers/gpu/drm/virtio/virtgpu_vq.c  | 10 +++++++---
 2 files changed, 9 insertions(+), 3 deletions(-)

drivers/gpu/drm/virtio/virtgpu_kms.c +2 -0

index 6400506a06b07..bed450fbb2168 100644
@@ -113,8 +113,10 @@ static void virtio_gpu_get_capsets(struct virtio_gpu_device *vgdev,
 					 vgdev->capsets[i].id > 0, 5 * HZ);
 		if (ret == 0) {
 			DRM_ERROR("timed out waiting for cap set %d\n", i);
+			spin_lock(&vgdev->display_info_lock);
 			kfree(vgdev->capsets);
 			vgdev->capsets = NULL;
+			spin_unlock(&vgdev->display_info_lock);
 			return;
 		}
 		DRM_INFO("cap set %d: id %d, max-version %d, max-size %d\n",

drivers/gpu/drm/virtio/virtgpu_vq.c +7 -3

index a3be65e689fd2..a956c73ea85e5 100644
@@ -563,9 +563,13 @@ static void virtio_gpu_cmd_get_capset_info_cb(struct virtio_gpu_device *vgdev,
 	int i = le32_to_cpu(cmd->capset_index);
 
 	spin_lock(&vgdev->display_info_lock);
-	vgdev->capsets[i].id = le32_to_cpu(resp->capset_id);
-	vgdev->capsets[i].max_version = le32_to_cpu(resp->capset_max_version);
-	vgdev->capsets[i].max_size = le32_to_cpu(resp->capset_max_size);
+	if (vgdev->capsets) {
+		vgdev->capsets[i].id = le32_to_cpu(resp->capset_id);
+		vgdev->capsets[i].max_version = le32_to_cpu(resp->capset_max_version);
+		vgdev->capsets[i].max_size = le32_to_cpu(resp->capset_max_size);
+	} else {
+		DRM_ERROR("invalid capset memory.");
+	}
 	spin_unlock(&vgdev->display_info_lock);
 	wake_up(&vgdev->resp_wq);
 }

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 14:16 UTC #176 lore raw

PATCH 176/191 scsi: qedi: Protect active command list to avoid list corruption

From: Nilesh Javali <[email protected]>

[ Upstream commit c0650e28448d606c84f76c34333dba30f61de993 ]

Protect active command list for non-I/O commands like login response, logout response, text response, and recovery cleanup of active list to avoid list corruption.

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Nilesh Javali <[email protected]>

Signed-off-by Manish Rangankar <[email protected]>

Signed-off-by Martin K. Petersen <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/scsi/qedi/qedi_fw.c    | 8 ++++++++
 drivers/scsi/qedi/qedi_iscsi.c | 2 ++
 2 files changed, 10 insertions(+)

drivers/scsi/qedi/qedi_fw.c +8 -0

index 2e5e04a7623fa..e688300faeefd 100644
@@ -62,6 +62,7 @@ static void qedi_process_logout_resp(struct qedi_ctx *qedi,
 		  "Freeing tid=0x%x for cid=0x%x\n",
 		  cmd->task_id, qedi_conn->iscsi_conn_id);
 
+	spin_lock(&qedi_conn->list_lock);
 	if (likely(cmd->io_cmd_in_list)) {
 		cmd->io_cmd_in_list = false;
 		list_del_init(&cmd->io_cmd);

@@ -72,6 +73,7 @@ static void qedi_process_logout_resp(struct qedi_ctx *qedi,
 			  cmd->task_id, qedi_conn->iscsi_conn_id,
 			  &cmd->io_cmd);
 	}
+	spin_unlock(&qedi_conn->list_lock);
 
 	cmd->state = RESPONSE_RECEIVED;
 	qedi_clear_task_idx(qedi, cmd->task_id);

@@ -127,6 +129,7 @@ static void qedi_process_text_resp(struct qedi_ctx *qedi,
 		  "Freeing tid=0x%x for cid=0x%x\n",
 		  cmd->task_id, qedi_conn->iscsi_conn_id);
 
+	spin_lock(&qedi_conn->list_lock);
 	if (likely(cmd->io_cmd_in_list)) {
 		cmd->io_cmd_in_list = false;
 		list_del_init(&cmd->io_cmd);

@@ -137,6 +140,7 @@ static void qedi_process_text_resp(struct qedi_ctx *qedi,
 			  cmd->task_id, qedi_conn->iscsi_conn_id,
 			  &cmd->io_cmd);
 	}
+	spin_unlock(&qedi_conn->list_lock);
 
 	cmd->state = RESPONSE_RECEIVED;
 	qedi_clear_task_idx(qedi, cmd->task_id);

@@ -231,11 +235,13 @@ static void qedi_process_tmf_resp(struct qedi_ctx *qedi,
 
 	tmf_hdr = (struct iscsi_tm *)qedi_cmd->task->hdr;
 
+	spin_lock(&qedi_conn->list_lock);
 	if (likely(qedi_cmd->io_cmd_in_list)) {
 		qedi_cmd->io_cmd_in_list = false;
 		list_del_init(&qedi_cmd->io_cmd);
 		qedi_conn->active_cmd_count--;
 	}
+	spin_unlock(&qedi_conn->list_lock);
 
 	if (((tmf_hdr->flags & ISCSI_FLAG_TM_FUNC_MASK) ==
 	      ISCSI_TM_FUNC_LOGICAL_UNIT_RESET) ||

@@ -299,11 +305,13 @@ static void qedi_process_login_resp(struct qedi_ctx *qedi,
 		  ISCSI_LOGIN_RESPONSE_HDR_DATA_SEG_LEN_MASK;
 	qedi_conn->gen_pdu.resp_wr_ptr = qedi_conn->gen_pdu.resp_buf + pld_len;
 
+	spin_lock(&qedi_conn->list_lock);
 	if (likely(cmd->io_cmd_in_list)) {
 		cmd->io_cmd_in_list = false;
 		list_del_init(&cmd->io_cmd);
 		qedi_conn->active_cmd_count--;
 	}
+	spin_unlock(&qedi_conn->list_lock);
 
 	memset(task_ctx, '\0', sizeof(*task_ctx));

drivers/scsi/qedi/qedi_iscsi.c +2 -0

index 4d7971c3f339b..c55fb411c8a55 100644
@@ -983,11 +983,13 @@ static void qedi_cleanup_active_cmd_list(struct qedi_conn *qedi_conn)
 {
 	struct qedi_cmd *cmd, *cmd_tmp;
 
+	spin_lock(&qedi_conn->list_lock);
 	list_for_each_entry_safe(cmd, cmd_tmp, &qedi_conn->active_cmd_list,
 				 io_cmd) {
 		list_del_init(&cmd->io_cmd);
 		qedi_conn->active_cmd_count--;
 	}
+	spin_unlock(&qedi_conn->list_lock);
 }
 
 static void qedi_ep_disconnect(struct iscsi_endpoint *ep)

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 18:05 UTC #177 lore raw

PATCH 177/191 scsi: qedi: Fix list_del corruption while removing active I/O

From: Nilesh Javali <[email protected]>

[ Upstream commit 28b35d17f9f8573d4646dd8df08917a4076a6b63 ]

While aborting the I/O, the firmware cleanup task timed out and driver deleted the I/O from active command list. Some time later the firmware sent the cleanup task response and driver again deleted the I/O from active command list causing firmware to send completion for non-existent I/O and list_del corruption of active command list.

Add fix to check if I/O is present before deleting it from the active command list to ensure firmware sends valid I/O completion and protect against list_del corruption.

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Nilesh Javali <[email protected]>

Signed-off-by Manish Rangankar <[email protected]>

Signed-off-by Martin K. Petersen <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/scsi/qedi/qedi_fw.c | 15 +++++++++++----
 1 file changed, 11 insertions(+), 4 deletions(-)

drivers/scsi/qedi/qedi_fw.c +11 -4

index e688300faeefd..e8f2c662471e0 100644
@@ -844,8 +844,11 @@ static void qedi_process_cmd_cleanup_resp(struct qedi_ctx *qedi,
 			qedi_clear_task_idx(qedi_conn->qedi, rtid);
 
 			spin_lock(&qedi_conn->list_lock);
-			list_del_init(&dbg_cmd->io_cmd);
-			qedi_conn->active_cmd_count--;
+			if (likely(dbg_cmd->io_cmd_in_list)) {
+				dbg_cmd->io_cmd_in_list = false;
+				list_del_init(&dbg_cmd->io_cmd);
+				qedi_conn->active_cmd_count--;
+			}
 			spin_unlock(&qedi_conn->list_lock);
 			qedi_cmd->state = CLEANUP_RECV;
 			wake_up_interruptible(&qedi_conn->wait_queue);

@@ -1265,6 +1268,7 @@ int qedi_cleanup_all_io(struct qedi_ctx *qedi, struct qedi_conn *qedi_conn,
 		qedi_conn->cmd_cleanup_req++;
 		qedi_iscsi_cleanup_task(ctask, true);
 
+		cmd->io_cmd_in_list = false;
 		list_del_init(&cmd->io_cmd);
 		qedi_conn->active_cmd_count--;
 		QEDI_WARN(&qedi->dbg_ctx,

@@ -1478,8 +1482,11 @@ static void qedi_tmf_work(struct work_struct *work)
 	spin_unlock_bh(&qedi_conn->tmf_work_lock);
 
 	spin_lock(&qedi_conn->list_lock);
-	list_del_init(&cmd->io_cmd);
-	qedi_conn->active_cmd_count--;
+	if (likely(cmd->io_cmd_in_list)) {
+		cmd->io_cmd_in_list = false;
+		list_del_init(&cmd->io_cmd);
+		qedi_conn->active_cmd_count--;
+	}
 	spin_unlock(&qedi_conn->list_lock);
 
 	clear_bit(QEDI_CONN_FW_CLEANUP, &qedi_conn->flags);

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 18:08 UTC #178 lore raw

PATCH 178/191 tty: ipwireless: fix error handling

From: Tong Zhang <[email protected]>

[ Upstream commit db332356222d9429731ab9395c89cca403828460 ]

ipwireless_send_packet() can only return 0 on success and -ENOMEM on error, the caller should check non zero for error condition

Signed-off-by Tong Zhang <[email protected]>

Acked-by David Sterba <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Greg Kroah-Hartman <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/tty/ipwireless/network.c | 4 ++--
 drivers/tty/ipwireless/tty.c     | 2 +-
 2 files changed, 3 insertions(+), 3 deletions(-)

drivers/tty/ipwireless/network.c +2 -2

index 695439c031474..abc737ae81d1c 100644
@@ -117,7 +117,7 @@ static int ipwireless_ppp_start_xmit(struct ppp_channel *ppp_channel,
 					       skb->len,
 					       notify_packet_sent,
 					       network);
-			if (ret == -1) {
+			if (ret < 0) {
 				skb_pull(skb, 2);
 				return 0;
 			}

@@ -134,7 +134,7 @@ static int ipwireless_ppp_start_xmit(struct ppp_channel *ppp_channel,
 					       notify_packet_sent,
 					       network);
 			kfree(buf);
-			if (ret == -1)
+			if (ret < 0)
 				return 0;
 		}
 		kfree_skb(skb);

drivers/tty/ipwireless/tty.c +1 -1

index 1ef751c27ac6d..cb04971843306 100644
@@ -218,7 +218,7 @@ static int ipw_write(struct tty_struct *linux_tty,
 	ret = ipwireless_send_packet(tty->hardware, IPW_CHANNEL_RAS,
 			       buf, count,
 			       ipw_write_packet_sent_callback, tty);
-	if (ret == -1) {
+	if (ret < 0) {
 		mutex_unlock(&tty->ipw_tty_mutex);
 		return 0;
 	}

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 14:16 UTC #179 lore raw

PATCH 179/191 ipvs: Fix uninit-value in do_ip_vs_set_ctl()

Link https://syzkaller.appspot.com/bug?id=46ebfb92a8a812621a001ef04d90dfa459520fe2

From: Peilin Ye <[email protected]>

[ Upstream commit c5a8a8498eed1c164afc94f50a939c1a10abf8ad ]

do_ip_vs_set_ctl() is referencing uninitialized stack value when len is zero. Fix it.

Reported-by [email protected]

Signed-off-by Peilin Ye <[email protected]>

Acked-by Julian Anastasov <[email protected]>

Reviewed-by Simon Horman <[email protected]>

Signed-off-by Pablo Neira Ayuso <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 net/netfilter/ipvs/ip_vs_ctl.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

net/netfilter/ipvs/ip_vs_ctl.c +4 -3

index 5ec80818ace2c..c1672ff009637 100644
@@ -2425,6 +2425,10 @@ do_ip_vs_set_ctl(struct sock *sk, int cmd, void __user *user, unsigned int len)
 		/* Set timeout values for (tcp tcpfin udp) */
 		ret = ip_vs_set_timeout(ipvs, (struct ip_vs_timeout_user *)arg);
 		goto out_unlock;
+	} else if (!len) {
+		/* No more commands with len == 0 below */
+		ret = -EINVAL;
+		goto out_unlock;
 	}
 
 	usvc_compat = (struct ip_vs_service_user *)arg;

@@ -2501,9 +2505,6 @@ do_ip_vs_set_ctl(struct sock *sk, int cmd, void __user *user, unsigned int len)
 		break;
 	case IP_VS_SO_SET_DELDEST:
 		ret = ip_vs_del_dest(svc, &udest);
-		break;
-	default:
-		ret = -EINVAL;
 	}
 
   out_unlock:

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 18:08 UTC #180 lore raw

PATCH 180/191 reiserfs: Fix memory leak in reiserfs_parse_options()

From: Jan Kara <[email protected]>

[ Upstream commit e9d4709fcc26353df12070566970f080e651f0c9 ]

When a usrjquota or grpjquota mount option is used multiple times, we will leak memory allocated for the file name. Make sure the last setting is used and all the previous ones are properly freed.

Reported-by [email protected]

Signed-off-by Jan Kara <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 fs/reiserfs/super.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

fs/reiserfs/super.c +4 -4

index 9caf3948417c0..fbae5f4eea09c 100644
@@ -1264,6 +1264,10 @@ static int reiserfs_parse_options(struct super_block *s,
 						 "turned on.");
 				return 0;
 			}
+			if (qf_names[qtype] !=
+			    REISERFS_SB(s)->s_qf_names[qtype])
+				kfree(qf_names[qtype]);
+			qf_names[qtype] = NULL;
 			if (*arg) {	/* Some filename specified? */
 				if (REISERFS_SB(s)->s_qf_names[qtype]
 				    && strcmp(REISERFS_SB(s)->s_qf_names[qtype],

@@ -1293,10 +1297,6 @@ static int reiserfs_parse_options(struct super_block *s,
 				else
 					*mount_options |= 1 << REISERFS_GRPQUOTA;
 			} else {
-				if (qf_names[qtype] !=
-				    REISERFS_SB(s)->s_qf_names[qtype])
-					kfree(qf_names[qtype]);
-				qf_names[qtype] = NULL;
 				if (qtype == USRQUOTA)
 					*mount_options &= ~(1 << REISERFS_USRQUOTA);
 				else

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 14:16 UTC #181 lore raw

PATCH 181/191 mwifiex: dont call del_timer_sync() on uninitialized timer

[1] https://syzkaller.appspot.com/bug?id=26525f643f454dd7be0078423e3cdb0d57744959
[2] https://lkml.kernel.org/r/CA+ASDXMHt2gq9Hy+iP_BYkWXsSreWdp3_bAfMkNcuqJ3K+-jbQ@mail.gmail.com

From: Tetsuo Handa <[email protected]>

[ Upstream commit 621a3a8b1c0ecf16e1e5667ea5756a76a082b738 ]

syzbot is reporting that del_timer_sync() is called from mwifiex_usb_cleanup_tx_aggr() from mwifiex_unregister_dev() without checking timer_setup() from mwifiex_usb_tx_init() was called [1].

Ganapathi Bhat proposed a possibly cleaner fix, but it seems that that fix was forgotten [2].

"grep -FrB1 'del_timer' drivers/ | grep -FA1 '.function)'" says that currently there are 28 locations which call del_timer[_sync]() only if that timer's function field was initialized (because timer_setup() sets that timer's function field). Therefore, let's use same approach here.

Reported-by syzbot <[email protected]>

Cc Ganapathi Bhat <[email protected]>

Cc Brian Norris <[email protected]>

Signed-off-by Tetsuo Handa <[email protected]>

Reviewed-by Brian Norris <[email protected]>

Acked-by Ganapathi Bhat <[email protected]>

Signed-off-by Kalle Valo <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/net/wireless/marvell/mwifiex/usb.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

drivers/net/wireless/marvell/mwifiex/usb.c +2 -1

index 50890cab8807b..44d5005188c93 100644
@@ -1335,7 +1335,8 @@ static void mwifiex_usb_cleanup_tx_aggr(struct mwifiex_adapter *adapter)
 				skb_dequeue(&port->tx_aggr.aggr_list)))
 				mwifiex_write_data_complete(adapter, skb_tmp,
 							    0, -1);
-		del_timer_sync(&port->tx_aggr.timer_cnxt.hold_timer);
+		if (port->tx_aggr.timer_cnxt.hold_timer.function)
+			del_timer_sync(&port->tx_aggr.timer_cnxt.hold_timer);
 		port->tx_aggr.timer_cnxt.is_hold_timer_set = false;
 		port->tx_aggr.timer_cnxt.hold_tmo_msecs = 0;
 	}

Signature · 1 line

2.25.1

Greg Kroah-Hartman

author maintainer

2020-10-27 18:08 UTC #182 lore raw

PATCH 182/191 brcm80211: fix possible memleak in brcmf_proto_msgbuf_attach