Skip to contentSkip to conversation

5.9.2-rc1 review

PATCH In review Greg Kroah-Hartman 9 participants 770 messages Oct 27, 2020 – Nov 9, 2020 3 messages not in the archive Page 4 of 6

Subsystems (5)
lore
Share & tools
lore
author maintainer
#442 lore raw

PATCH 442/757 powerpc/watchpoint: Add hw_len wherever missing

In reply to Greg Kroah-Hartman

From: Ravi Bangoria <[email protected]>

[ Upstream commit 58da5984d2ea6d95f3f9d9e8dd9f7e1b0dddfb3c ]

There are couple of places where we set len but not hw_len. For ptrace/perf watchpoints, when CONFIG_HAVE_HW_BREAKPOINT=Y, hw_len will be calculated and set internally while parsing watchpoint. But when CONFIG_HAVE_HW_BREAKPOINT=N, we need to manually set 'hw_len'. Similarly for xmon as well, hw_len needs to be set directly.

Fixes b57aeab811db ("powerpc/watchpoint: Fix length calculation for unaligned target")
---
 arch/powerpc/kernel/ptrace/ptrace-noadv.c | 1 +
 arch/powerpc/xmon/xmon.c                  | 1 +
 2 files changed, 2 insertions(+)
arch/powerpc/kernel/ptrace/ptrace-noadv.c +1 -0
index 697c7e4b5877f..8bd8d8de5c40b 100644
@@ -219,6 +219,7 @@ long ppc_set_hwdebug(struct task_struct *child, struct ppc_hw_breakpoint *bp_inf
 	brk.address = ALIGN_DOWN(bp_info->addr, HW_BREAKPOINT_SIZE);
 	brk.type = HW_BRK_TYPE_TRANSLATE;
 	brk.len = DABR_MAX_LEN;
+	brk.hw_len = DABR_MAX_LEN;
 	if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_READ)
 		brk.type |= HW_BRK_TYPE_READ;
 	if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_WRITE)
arch/powerpc/xmon/xmon.c +1 -0
index df7bca00f5ec9..55c43a6c91112 100644
@@ -969,6 +969,7 @@ static void insert_cpu_bpts(void)
 			brk.address = dabr[i].address;
 			brk.type = (dabr[i].enabled & HW_BRK_TYPE_DABR) | HW_BRK_TYPE_PRIV_ALL;
 			brk.len = 8;
+			brk.hw_len = 8;
 			__set_breakpoint(i, &brk);
 		}
 	}
Signature · 1 line
2.25.1
author maintainer
#443 lore raw

PATCH 443/757 powerpc/book3s64/hash/4k: Support large linear mapping range with 4K

In reply to Greg Kroah-Hartman

From: Aneesh Kumar K.V <[email protected]>

[ Upstream commit 7746406baa3bc9e23fdd7b7da2f04d86e25ab837 ]

With commit: 0034d395f89d ("powerpc/mm/hash64: Map all the kernel regions in the same 0xc range"), we now split the 64TB address range into 4 contexts each of 16TB. That implies we can do only 16TB linear mapping.

On some systems, eg. Power9, memory attached to nodes > 0 will appear above 16TB in the linear mapping. This resulted in kernel crash when we boot such systems in hash translation mode with 4K PAGE_SIZE.

This patch updates the kernel mapping such that we now start supporting upto 61TB of memory with 4K. The kernel mapping now looks like below 4K PAGE_SIZE and hash translation.

    vmalloc start     = 0xc0003d0000000000
    IO start          = 0xc0003e0000000000
    vmemmap start     = 0xc0003f0000000000

Our MAX_PHYSMEM_BITS for 4K is still 64TB even though we can only map 61TB. We prevent bolt mapping anything outside 61TB range by checking against H_VMALLOC_START.

Fixes 0034d395f89d ("powerpc/mm/hash64: Map all the kernel regions in the same 0xc range")
---
 arch/powerpc/include/asm/book3s/64/hash-4k.h | 13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)
arch/powerpc/include/asm/book3s/64/hash-4k.h +6 -7
index 082b988087011..b3ca542f871ec 100644
@@ -13,20 +13,19 @@
  */
 #define MAX_EA_BITS_PER_CONTEXT		46
 
-#define REGION_SHIFT		(MAX_EA_BITS_PER_CONTEXT - 2)
 
 /*
- * Our page table limit us to 64TB. Hence for the kernel mapping,
- * each MAP area is limited to 16 TB.
- * The four map areas are:  linear mapping, vmap, IO and vmemmap
+ * Our page table limit us to 64TB. For 64TB physical memory, we only need 64GB
+ * of vmemmap space. To better support sparse memory layout, we use 61TB
+ * linear map range, 1TB of vmalloc, 1TB of I/O and 1TB of vmememmap.
  */
+#define REGION_SHIFT		(40)
 #define H_KERN_MAP_SIZE		(ASM_CONST(1) << REGION_SHIFT)
 
 /*
- * Define the address range of the kernel non-linear virtual area
- * 16TB
+ * Define the address range of the kernel non-linear virtual area (61TB)
  */
-#define H_KERN_VIRT_START	ASM_CONST(0xc000100000000000)
+#define H_KERN_VIRT_START	ASM_CONST(0xc0003d0000000000)
 
 #ifndef __ASSEMBLY__
 #define H_PTE_TABLE_SIZE	(sizeof(pte_t) << H_PTE_INDEX_SIZE)
Signature · 1 line
2.25.1
author maintainer
#444 lore raw

PATCH 444/757 powerpc/tau: Use appropriate temperature sample interval

In reply to Greg Kroah-Hartman

From: Finn Thain <[email protected]>

[ Upstream commit 66943005cc41f48e4d05614e8f76c0ca1812f0fd ]

According to the MPC750 Users Manual, the SITV value in Thermal Management Register 3 is 13 bits long. The present code calculates the SITV value as 60 * 500 cycles. This would overflow to give 10 us on a 500 MHz CPU rather than the intended 60 us. (But according to the Microprocessor Datasheet, there is also a factor of 266 that has to be applied to this value on certain parts i.e. speed sort above 266 MHz.) Always use the maximum cycle count, as recommended by the Datasheet.

---
 arch/powerpc/include/asm/reg.h |  2 +-
 arch/powerpc/kernel/tau_6xx.c  | 12 ++++--------
 2 files changed, 5 insertions(+), 9 deletions(-)
arch/powerpc/include/asm/reg.h +1 -1
index 88fb88491fe9f..5647006ed373e 100644
@@ -817,7 +817,7 @@
 #define THRM1_TIN	(1 << 31)
 #define THRM1_TIV	(1 << 30)
 #define THRM1_THRES(x)	((x&0x7f)<<23)
-#define THRM3_SITV(x)	((x&0x3fff)<<1)
+#define THRM3_SITV(x)	((x & 0x1fff) << 1)
 #define THRM1_TID	(1<<2)
 #define THRM1_TIE	(1<<1)
 #define THRM1_V		(1<<0)
arch/powerpc/kernel/tau_6xx.c +4 -8
index e2ab8a111b693..976d5bc1b5176 100644
@@ -178,15 +178,11 @@ static void tau_timeout(void * info)
 	 * complex sleep code needs to be added. One mtspr every time
 	 * tau_timeout is called is probably not a big deal.
 	 *
-	 * Enable thermal sensor and set up sample interval timer
-	 * need 20 us to do the compare.. until a nice 'cpu_speed' function
-	 * call is implemented, just assume a 500 mhz clock. It doesn't really
-	 * matter if we take too long for a compare since it's all interrupt
-	 * driven anyway.
-	 *
-	 * use a extra long time.. (60 us @ 500 mhz)
+	 * The "PowerPC 740 and PowerPC 750 Microprocessor Datasheet"
+	 * recommends that "the maximum value be set in THRM3 under all
+	 * conditions."
 	 */
-	mtspr(SPRN_THRM3, THRM3_SITV(500*60) | THRM3_E);
+	mtspr(SPRN_THRM3, THRM3_SITV(0x1fff) | THRM3_E);
 
 	local_irq_restore(flags);
 }
Signature · 1 line
2.25.1
author maintainer
#445 lore raw

PATCH 445/757 powerpc/tau: Convert from timer to workqueue

In reply to Greg Kroah-Hartman

From: Finn Thain <[email protected]>

[ Upstream commit b1c6a0a10bfaf36ec82fde6f621da72407fa60a1 ]

Since commit 19dbdcb8039cf ("smp: Warn on function calls from softirq context") the Thermal Assist Unit driver causes a warning like the following when CONFIG_SMP is enabled.

  ------------[ cut here ]------------
  WARNING: CPU: 0 PID: 0 at kernel/smp.c:428 smp_call_function_many_cond+0xf4/0x38c
  Modules linked in:
  CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.7.0-pmac #3
  NIP:  c00b37a8 LR: c00b3abc CTR: c001218c
  REGS: c0799c60 TRAP: 0700   Not tainted  (5.7.0-pmac)
  MSR:  00029032 <EE,ME,IR,DR,RI>  CR: 42000224  XER: 00000000
  GPR00: c00b3abc c0799d18 c076e300 c079ef5c c0011fec 00000000 00000000 00000000
  GPR08: 00000100 00000100 00008000 ffffffff 42000224 00000000 c079d040 c079d044
  GPR16: 00000001 00000000 00000004 c0799da0 c079f054 c07a0000 c07a0000 00000000
  GPR24: c0011fec 00000000 c079ef5c c079ef5c 00000000 00000000 00000000 00000000
  NIP [c00b37a8] smp_call_function_many_cond+0xf4/0x38c
  LR [c00b3abc] on_each_cpu+0x38/0x68
  Call Trace:
  [c0799d18] [ffffffff] 0xffffffff (unreliable)
  [c0799d68] [c00b3abc] on_each_cpu+0x38/0x68
  [c0799d88] [c0096704] call_timer_fn.isra.26+0x20/0x7c
  [c0799d98] [c0096b40] run_timer_softirq+0x1d4/0x3fc
  [c0799df8] [c05b4368] __do_softirq+0x118/0x240
  [c0799e58] [c0039c44] irq_exit+0xc4/0xcc
  [c0799e68] [c000ade8] timer_interrupt+0x1b0/0x230
  [c0799ea8] [c0013520] ret_from_except+0x0/0x14
  --- interrupt: 901 at arch_cpu_idle+0x24/0x6c
      LR = arch_cpu_idle+0x24/0x6c
  [c0799f70] [00000001] 0x1 (unreliable)
  [c0799f80] [c0060990] do_idle+0xd8/0x17c
  [c0799fa0] [c0060ba8] cpu_startup_entry+0x24/0x28
  [c0799fb0] [c072d220] start_kernel+0x434/0x44c
  [c0799ff0] [00003860] 0x3860
  Instruction dump:
  8129f204 2f890000 40beff98 3d20c07a 8929eec4 2f890000 40beff88 0fe00000
  81220000 552805de 550802ef 4182ff84 <0fe00000> 3860ffff 7f65db78 7f44d378
  ---[ end trace 34a886e47819c2eb ]---

Don't call on_each_cpu() from a timer callback, call it from a worker thread instead.

---
 arch/powerpc/kernel/tau_6xx.c | 38 +++++++++++++++++------------------
 1 file changed, 18 insertions(+), 20 deletions(-)
arch/powerpc/kernel/tau_6xx.c +18 -20
index 976d5bc1b5176..268205cc347da 100644
@@ -13,13 +13,14 @@
  */
 
 #include <linux/errno.h>
-#include <linux/jiffies.h>
 #include <linux/kernel.h>
 #include <linux/param.h>
 #include <linux/string.h>
 #include <linux/mm.h>
 #include <linux/interrupt.h>
 #include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/workqueue.h>
 
 #include <asm/io.h>
 #include <asm/reg.h>
@@ -39,8 +40,6 @@ static struct tau_temp
 	unsigned char grew;
 } tau[NR_CPUS];
 
-struct timer_list tau_timer;
-
 #undef DEBUG
 
 /* TODO: put these in a /proc interface, with some sanity checks, and maybe
@@ -50,7 +49,7 @@ struct timer_list tau_timer;
 #define step_size		2	/* step size when temp goes out of range */
 #define window_expand		1	/* expand the window by this much */
 /* configurable values for shrinking the window */
-#define shrink_timer	2*HZ	/* period between shrinking the window */
+#define shrink_timer	2000	/* period between shrinking the window */
 #define min_window	2	/* minimum window size, degrees C */
 
 static void set_thresholds(unsigned long cpu)
@@ -187,14 +186,18 @@ static void tau_timeout(void * info)
 	local_irq_restore(flags);
 }
 
-static void tau_timeout_smp(struct timer_list *unused)
-{
+static struct workqueue_struct *tau_workq;
 
-	/* schedule ourselves to be run again */
-	mod_timer(&tau_timer, jiffies + shrink_timer) ;
+static void tau_work_func(struct work_struct *work)
+{
+	msleep(shrink_timer);
 	on_each_cpu(tau_timeout, NULL, 0);
+	/* schedule ourselves to be run again */
+	queue_work(tau_workq, work);
 }
 
+DECLARE_WORK(tau_work, tau_work_func);
+
 /*
  * setup the TAU
  *
@@ -227,21 +230,16 @@ static int __init TAU_init(void)
 		return 1;
 	}
 
-
-	/* first, set up the window shrinking timer */
-	timer_setup(&tau_timer, tau_timeout_smp, 0);
-	tau_timer.expires = jiffies + shrink_timer;
-	add_timer(&tau_timer);
+	tau_workq = alloc_workqueue("tau", WQ_UNBOUND, 1, 0);
+	if (!tau_workq)
+		return -ENOMEM;
 
 	on_each_cpu(TAU_init_smp, NULL, 0);
 
-	printk("Thermal assist unit ");
-#ifdef CONFIG_TAU_INT
-	printk("using interrupts, ");
-#else
-	printk("using timers, ");
-#endif
-	printk("shrink_timer: %d jiffies\n", shrink_timer);
+	queue_work(tau_workq, &tau_work);
+
+	pr_info("Thermal assist unit using %s, shrink_timer: %d ms\n",
+		IS_ENABLED(CONFIG_TAU_INT) ? "interrupts" : "workqueue", shrink_timer);
 	tau_initialized = 1;
 
 	return 0;
Signature · 1 line
2.25.1
author maintainer
#446 lore raw

PATCH 446/757 powerpc/tau: Remove duplicated set_thresholds() call

In reply to Greg Kroah-Hartman

From: Finn Thain <[email protected]>

[ Upstream commit 420ab2bc7544d978a5d0762ee736412fe9c796ab ]

The commentary at the call site seems to disagree with the code. The conditional prevents calling set_thresholds() via the exception handler, which appears to crash. Perhaps that's because it immediately triggers another TAU exception. Anyway, calling set_thresholds() from TAUupdate() is redundant because tau_timeout() does so.

---
 arch/powerpc/kernel/tau_6xx.c | 5 -----
 1 file changed, 5 deletions(-)
arch/powerpc/kernel/tau_6xx.c +0 -5
index 268205cc347da..b8d7e7d498e0a 100644
@@ -110,11 +110,6 @@ static void TAUupdate(int cpu)
 #ifdef DEBUG
 	printk("grew = %d\n", tau[cpu].grew);
 #endif
-
-#ifndef CONFIG_TAU_INT /* tau_timeout will do this if not using interrupts */
-	set_thresholds(cpu);
-#endif
-
 }
 
 #ifdef CONFIG_TAU_INT
Signature · 1 line
2.25.1
author maintainer
#447 lore raw

PATCH 447/757 powerpc/tau: Check processor type before enabling TAU interrupt

In reply to Greg Kroah-Hartman

From: Finn Thain <[email protected]>

[ Upstream commit 5e3119e15fed5b9a9a7e528665ff098a4a8dbdbc ]

According to Freescale's documentation, MPC74XX processors have an erratum that prevents the TAU interrupt from working, so don't try to use it when running on those processors.

---
 arch/powerpc/kernel/tau_6xx.c  | 33 ++++++++++++++-------------------
 arch/powerpc/platforms/Kconfig |  5 ++---
 2 files changed, 16 insertions(+), 22 deletions(-)
arch/powerpc/kernel/tau_6xx.c +14 -19
index b8d7e7d498e0a..614b5b272d9c6 100644
@@ -40,6 +40,8 @@ static struct tau_temp
 	unsigned char grew;
 } tau[NR_CPUS];
 
+static bool tau_int_enable;
+
 #undef DEBUG
 
 /* TODO: put these in a /proc interface, with some sanity checks, and maybe
@@ -54,22 +56,13 @@ static struct tau_temp
 
 static void set_thresholds(unsigned long cpu)
 {
-#ifdef CONFIG_TAU_INT
-	/*
-	 * setup THRM1,
-	 * threshold, valid bit, enable interrupts, interrupt when below threshold
-	 */
-	mtspr(SPRN_THRM1, THRM1_THRES(tau[cpu].low) | THRM1_V | THRM1_TIE | THRM1_TID);
+	u32 maybe_tie = tau_int_enable ? THRM1_TIE : 0;
 
-	/* setup THRM2,
-	 * threshold, valid bit, enable interrupts, interrupt when above threshold
-	 */
-	mtspr (SPRN_THRM2, THRM1_THRES(tau[cpu].high) | THRM1_V | THRM1_TIE);
-#else
-	/* same thing but don't enable interrupts */
-	mtspr(SPRN_THRM1, THRM1_THRES(tau[cpu].low) | THRM1_V | THRM1_TID);
-	mtspr(SPRN_THRM2, THRM1_THRES(tau[cpu].high) | THRM1_V);
-#endif
+	/* setup THRM1, threshold, valid bit, interrupt when below threshold */
+	mtspr(SPRN_THRM1, THRM1_THRES(tau[cpu].low) | THRM1_V | maybe_tie | THRM1_TID);
+
+	/* setup THRM2, threshold, valid bit, interrupt when above threshold */
+	mtspr(SPRN_THRM2, THRM1_THRES(tau[cpu].high) | THRM1_V | maybe_tie);
 }
 
 static void TAUupdate(int cpu)
@@ -142,9 +135,8 @@ static void tau_timeout(void * info)
 	local_irq_save(flags);
 	cpu = smp_processor_id();
 
-#ifndef CONFIG_TAU_INT
-	TAUupdate(cpu);
-#endif
+	if (!tau_int_enable)
+		TAUupdate(cpu);
 
 	size = tau[cpu].high - tau[cpu].low;
 	if (size > min_window && ! tau[cpu].grew) {
@@ -225,6 +217,9 @@ static int __init TAU_init(void)
 		return 1;
 	}
 
+	tau_int_enable = IS_ENABLED(CONFIG_TAU_INT) &&
+			 !strcmp(cur_cpu_spec->platform, "ppc750");
+
 	tau_workq = alloc_workqueue("tau", WQ_UNBOUND, 1, 0);
 	if (!tau_workq)
 		return -ENOMEM;
@@ -234,7 +229,7 @@ static int __init TAU_init(void)
 	queue_work(tau_workq, &tau_work);
 
 	pr_info("Thermal assist unit using %s, shrink_timer: %d ms\n",
-		IS_ENABLED(CONFIG_TAU_INT) ? "interrupts" : "workqueue", shrink_timer);
+		tau_int_enable ? "interrupts" : "workqueue", shrink_timer);
 	tau_initialized = 1;
 
 	return 0;
arch/powerpc/platforms/Kconfig +2 -3
index fb7515b4fa9c6..9fe36f0b54c1a 100644
@@ -223,9 +223,8 @@ config TAU
 	  temperature within 2-4 degrees Celsius. This option shows the current
 	  on-die temperature in /proc/cpuinfo if the cpu supports it.
 
-	  Unfortunately, on some chip revisions, this sensor is very inaccurate
-	  and in many cases, does not work at all, so don't assume the cpu
-	  temp is actually what /proc/cpuinfo says it is.
+	  Unfortunately, this sensor is very inaccurate when uncalibrated, so
+	  don't assume the cpu temp is actually what /proc/cpuinfo says it is.
 
 config TAU_INT
 	bool "Interrupt driven TAU driver (DANGEROUS)"
Signature · 1 line
2.25.1
author maintainer
#448 lore raw

PATCH 448/757 powerpc/tau: Disable TAU between measurements

In reply to Greg Kroah-Hartman

From: Finn Thain <[email protected]>

[ Upstream commit e63d6fb5637e92725cf143559672a34b706bca4f ]

Enabling CONFIG_TAU_INT causes random crashes:

Unrecoverable exception 1700 at c0009414 (msr=1000)

Oops: Unrecoverable exception, sig: 6 [#1]
BE PAGE_SIZE=4K MMU=Hash SMP NR_CPUS=2 PowerMac
Modules linked in:
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.7.0-pmac-00043-gd5f545e1a8593 #5
NIP:  c0009414 LR: c0009414 CTR: c00116fc
REGS: c0799eb8 TRAP: 1700   Not tainted  (5.7.0-pmac-00043-gd5f545e1a8593)
MSR:  00001000 <ME>  CR: 22000228  XER: 00000100

GPR00: 00000000 c0799f70 c076e300 00800000 0291c0ac 00e00000 c076e300 00049032
GPR08: 00000001 c00116fc 00000000 dfbd3200 ffffffff 007f80a8 00000000 00000000
GPR16: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 c075ce04
GPR24: c075ce04 dfff8880 c07b0000 c075ce04 00080000 00000001 c079ef98 c079ef5c NIP [c0009414] arch_cpu_idle+0x24/0x6c
LR [c0009414] arch_cpu_idle+0x24/0x6c

Call Trace:

[c0799f70] [00000001] 0x1 (unreliable)
[c0799f80] [c0060990] do_idle+0xd8/0x17c
[c0799fa0] [c0060ba4] cpu_startup_entry+0x20/0x28
[c0799fb0] [c072d220] start_kernel+0x434/0x44c
[c0799ff0] [00003860] 0x3860
Instruction dump:
XXXXXXXX XXXXXXXX XXXXXXXX 3d20c07b XXXXXXXX XXXXXXXX XXXXXXXX 7c0802a6 XXXXXXXX XXXXXXXX XXXXXXXX 4e800421 XXXXXXXX XXXXXXXX XXXXXXXX 7d2000a6

---[ end trace 3a0c9b5cb216db6b ]---

Resolve this problem by disabling each THRMn comparator when handling the associated THRMn interrupt and by disabling the TAU entirely when updating THRMn thresholds.

---
 arch/powerpc/kernel/tau_6xx.c  | 65 +++++++++++++---------------------
 arch/powerpc/platforms/Kconfig |  9 ++---
 2 files changed, 26 insertions(+), 48 deletions(-)
arch/powerpc/kernel/tau_6xx.c +24 -41
index 614b5b272d9c6..0b4694b8d2482 100644
@@ -42,8 +42,6 @@ static struct tau_temp
 
 static bool tau_int_enable;
 
-#undef DEBUG
-
 /* TODO: put these in a /proc interface, with some sanity checks, and maybe
  * dynamic adjustment to minimize # of interrupts */
 /* configurable values for step size and how much to expand the window when
@@ -67,42 +65,33 @@ static void set_thresholds(unsigned long cpu)
 
 static void TAUupdate(int cpu)
 {
-	unsigned thrm;
-
-#ifdef DEBUG
-	printk("TAUupdate ");
-#endif
+	u32 thrm;
+	u32 bits = THRM1_TIV | THRM1_TIN | THRM1_V;
 
 	/* if both thresholds are crossed, the step_sizes cancel out
 	 * and the window winds up getting expanded twice. */
-	if((thrm = mfspr(SPRN_THRM1)) & THRM1_TIV){ /* is valid? */
-		if(thrm & THRM1_TIN){ /* crossed low threshold */
-			if (tau[cpu].low >= step_size){
-				tau[cpu].low -= step_size;
-				tau[cpu].high -= (step_size - window_expand);
-			}
-			tau[cpu].grew = 1;
-#ifdef DEBUG
-			printk("low threshold crossed ");
-#endif
+	thrm = mfspr(SPRN_THRM1);
+	if ((thrm & bits) == bits) {
+		mtspr(SPRN_THRM1, 0);
+
+		if (tau[cpu].low >= step_size) {
+			tau[cpu].low -= step_size;
+			tau[cpu].high -= (step_size - window_expand);
 		}
+		tau[cpu].grew = 1;
+		pr_debug("%s: low threshold crossed\n", __func__);
 	}
-	if((thrm = mfspr(SPRN_THRM2)) & THRM1_TIV){ /* is valid? */
-		if(thrm & THRM1_TIN){ /* crossed high threshold */
-			if (tau[cpu].high <= 127-step_size){
-				tau[cpu].low += (step_size - window_expand);
-				tau[cpu].high += step_size;
-			}
-			tau[cpu].grew = 1;
-#ifdef DEBUG
-			printk("high threshold crossed ");
-#endif
+	thrm = mfspr(SPRN_THRM2);
+	if ((thrm & bits) == bits) {
+		mtspr(SPRN_THRM2, 0);
+
+		if (tau[cpu].high <= 127 - step_size) {
+			tau[cpu].low += (step_size - window_expand);
+			tau[cpu].high += step_size;
 		}
+		tau[cpu].grew = 1;
+		pr_debug("%s: high threshold crossed\n", __func__);
 	}
-
-#ifdef DEBUG
-	printk("grew = %d\n", tau[cpu].grew);
-#endif
 }
 
 #ifdef CONFIG_TAU_INT
@@ -127,17 +116,17 @@ void TAUException(struct pt_regs * regs)
 static void tau_timeout(void * info)
 {
 	int cpu;
-	unsigned long flags;
 	int size;
 	int shrink;
 
-	/* disabling interrupts *should* be okay */
-	local_irq_save(flags);
 	cpu = smp_processor_id();
 
 	if (!tau_int_enable)
 		TAUupdate(cpu);
 
+	/* Stop thermal sensor comparisons and interrupts */
+	mtspr(SPRN_THRM3, 0);
+
 	size = tau[cpu].high - tau[cpu].low;
 	if (size > min_window && ! tau[cpu].grew) {
 		/* do an exponential shrink of half the amount currently over size */
@@ -159,18 +148,12 @@ static void tau_timeout(void * info)
 
 	set_thresholds(cpu);
 
-	/*
-	 * Do the enable every time, since otherwise a bunch of (relatively)
-	 * complex sleep code needs to be added. One mtspr every time
-	 * tau_timeout is called is probably not a big deal.
-	 *
+	/* Restart thermal sensor comparisons and interrupts.
 	 * The "PowerPC 740 and PowerPC 750 Microprocessor Datasheet"
 	 * recommends that "the maximum value be set in THRM3 under all
 	 * conditions."
 	 */
 	mtspr(SPRN_THRM3, THRM3_SITV(0x1fff) | THRM3_E);
-
-	local_irq_restore(flags);
 }
 
 static struct workqueue_struct *tau_workq;
arch/powerpc/platforms/Kconfig +2 -7
index 9fe36f0b54c1a..b439b027a42f1 100644
@@ -227,7 +227,7 @@ config TAU
 	  don't assume the cpu temp is actually what /proc/cpuinfo says it is.
 
 config TAU_INT
-	bool "Interrupt driven TAU driver (DANGEROUS)"
+	bool "Interrupt driven TAU driver (EXPERIMENTAL)"
 	depends on TAU
 	help
 	  The TAU supports an interrupt driven mode which causes an interrupt
@@ -235,12 +235,7 @@ config TAU_INT
 	  to get notified the temp has exceeded a range. With this option off,
 	  a timer is used to re-check the temperature periodically.
 
-	  However, on some cpus it appears that the TAU interrupt hardware
-	  is buggy and can cause a situation which would lead unexplained hard
-	  lockups.
-
-	  Unless you are extending the TAU driver, or enjoy kernel/hardware
-	  debugging, leave this option off.
+	  If in doubt, say N here.
 
 config TAU_AVERAGE
 	bool "Average high and low temp"
Signature · 1 line
2.25.1
author maintainer
#449 lore raw

PATCH 449/757 powerpc/kasan: Fix CONFIG_KASAN_VMALLOC for 8xx

In reply to Greg Kroah-Hartman

From: Christophe Leroy <[email protected]>

[ Upstream commit 4c42dc5c69a8f24c467a6c997909d2f1d4efdc7f ]

Before the commit identified below, pages tables allocation was performed after the allocation of final shadow area for linear memory. But that commit switched the order, leading to page tables being already allocated at the time 8xx kasan_init_shadow_8M() is called. Due to this, kasan_init_shadow_8M() doesn't map the needed shadow entries because there are already page tables.

kasan_init_shadow_8M() installs huge PMD entries instead of page tables. We could at that time free the page tables, but there is no point in creating page tables that get freed before being used.

Only book3s/32 hash needs early allocation of page tables. For other variants, we can keep the initial order and create remaining page tables after the allocation of final shadow memory for linear mem.

Move back the allocation of shadow page tables for CONFIG_KASAN_VMALLOC into kasan_init() after the loop which creates final shadow memory for linear mem.

---
 arch/powerpc/mm/kasan/kasan_init_32.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)
arch/powerpc/mm/kasan/kasan_init_32.c +9 -3
index fb294046e00e4..929716ea21e9c 100644
@@ -127,8 +127,7 @@ void __init kasan_mmu_init(void)
 {
 	int ret;
 
-	if (early_mmu_has_feature(MMU_FTR_HPTE_TABLE) ||
-	    IS_ENABLED(CONFIG_KASAN_VMALLOC)) {
+	if (early_mmu_has_feature(MMU_FTR_HPTE_TABLE)) {
 		ret = kasan_init_shadow_page_tables(KASAN_SHADOW_START, KASAN_SHADOW_END);
 
 		if (ret)
@@ -139,11 +138,11 @@ void __init kasan_mmu_init(void)
 void __init kasan_init(void)
 {
 	struct memblock_region *reg;
+	int ret;
 
 	for_each_memblock(memory, reg) {
 		phys_addr_t base = reg->base;
 		phys_addr_t top = min(base + reg->size, total_lowmem);
-		int ret;
 
 		if (base >= top)
 			continue;
@@ -153,6 +152,13 @@ void __init kasan_init(void)
 			panic("kasan: kasan_init_region() failed");
 	}
 
+	if (IS_ENABLED(CONFIG_KASAN_VMALLOC)) {
+		ret = kasan_init_shadow_page_tables(KASAN_SHADOW_START, KASAN_SHADOW_END);
+
+		if (ret)
+			panic("kasan: kasan_init_shadow_page_tables() failed");
+	}
+
 	kasan_remap_early_shadow_ro();
 
 	clear_page(kasan_early_shadow_page);
Signature · 1 line
2.25.1
author maintainer
#450 lore raw

PATCH 450/757 powerpc/64s/radix: Fix mm_cpumask trimming race vs kthread_use_mm

In reply to Greg Kroah-Hartman

From: Nicholas Piggin <[email protected]>

[ Upstream commit a665eec0a22e11cdde708c1c256a465ebe768047 ]

Commit 0cef77c7798a7 ("powerpc/64s/radix: flush remote CPUs out of single-threaded mm_cpumask") added a mechanism to trim the mm_cpumask of a process under certain conditions. One of the assumptions is that mm_users would not be incremented via a reference outside the process context with mmget_not_zero() then go on to kthread_use_mm() via that reference.

That invariant was broken by io_uring code (see previous sparc64 fix), but I'll point Fixes: to the original powerpc commit because we are changing that assumption going forward, so this will make backports match up.

Fix this by no longer relying on that assumption, but by having each CPU check the mm is not being used, and clearing their own bit from the mask only if it hasn't been switched-to by the time the IPI is processed.

This relies on commit 38cf307c1f20 ("mm: fix kthread_use_mm() vs TLB invalidate") and ARCH_WANT_IRQS_OFF_ACTIVATE_MM to disable irqs over mm switch sequences.

Fixes 0cef77c7798a7 ("powerpc/64s/radix: flush remote CPUs out of single-threaded mm_cpumask")

Depends-on: 38cf307c1f20 ("mm: fix kthread_use_mm() vs TLB invalidate")

---
 arch/powerpc/include/asm/tlb.h       | 13 -------------
 arch/powerpc/mm/book3s64/radix_tlb.c | 23 ++++++++++++++++-------
 2 files changed, 16 insertions(+), 20 deletions(-)
arch/powerpc/include/asm/tlb.h +0 -13
index fbc6f3002f236..d97f061fecac0 100644
@@ -66,19 +66,6 @@ static inline int mm_is_thread_local(struct mm_struct *mm)
 		return false;
 	return cpumask_test_cpu(smp_processor_id(), mm_cpumask(mm));
 }
-static inline void mm_reset_thread_local(struct mm_struct *mm)
-{
-	WARN_ON(atomic_read(&mm->context.copros) > 0);
-	/*
-	 * It's possible for mm_access to take a reference on mm_users to
-	 * access the remote mm from another thread, but it's not allowed
-	 * to set mm_cpumask, so mm_users may be > 1 here.
-	 */
-	WARN_ON(current->mm != mm);
-	atomic_set(&mm->context.active_cpus, 1);
-	cpumask_clear(mm_cpumask(mm));
-	cpumask_set_cpu(smp_processor_id(), mm_cpumask(mm));
-}
 #else /* CONFIG_PPC_BOOK3S_64 */
 static inline int mm_is_thread_local(struct mm_struct *mm)
 {
arch/powerpc/mm/book3s64/radix_tlb.c +16 -7
index 0d233763441fd..143b4fd396f08 100644
@@ -645,19 +645,29 @@ static void do_exit_flush_lazy_tlb(void *arg)
 	struct mm_struct *mm = arg;
 	unsigned long pid = mm->context.id;
 
+	/*
+	 * A kthread could have done a mmget_not_zero() after the flushing CPU
+	 * checked mm_is_singlethreaded, and be in the process of
+	 * kthread_use_mm when interrupted here. In that case, current->mm will
+	 * be set to mm, because kthread_use_mm() setting ->mm and switching to
+	 * the mm is done with interrupts off.
+	 */
 	if (current->mm == mm)
-		return; /* Local CPU */
+		goto out_flush;
 
 	if (current->active_mm == mm) {
-		/*
-		 * Must be a kernel thread because sender is single-threaded.
-		 */
-		BUG_ON(current->mm);
+		WARN_ON_ONCE(current->mm != NULL);
+		/* Is a kernel thread and is using mm as the lazy tlb */
 		mmgrab(&init_mm);
-		switch_mm(mm, &init_mm, current);
 		current->active_mm = &init_mm;
+		switch_mm_irqs_off(mm, &init_mm, current);
 		mmdrop(mm);
 	}
+
+	atomic_dec(&mm->context.active_cpus);
+	cpumask_clear_cpu(smp_processor_id(), mm_cpumask(mm));
+
+out_flush:
 	_tlbiel_pid(pid, RIC_FLUSH_ALL);
 }
 
@@ -672,7 +682,6 @@ static void exit_flush_lazy_tlbs(struct mm_struct *mm)
 	 */
 	smp_call_function_many(mm_cpumask(mm), do_exit_flush_lazy_tlb,
 				(void *)mm, 1);
-	mm_reset_thread_local(mm);
 }
 
 void radix__flush_tlb_mm(struct mm_struct *mm)
Signature · 1 line
2.25.1
author maintainer
#451 lore raw

PATCH 451/757 powerpc/papr_scm: Fix warning triggered by perf_stats_show()

In reply to Greg Kroah-Hartman

From: Vaibhav Jain <[email protected]>

[ Upstream commit ca78ef2f08ccfa29b711d644964cdf9d7ace15e5 ]

A warning is reported by the kernel in case perf_stats_show() returns an error code. The warning is of the form below:

papr_scm ibm,persistent-memory:ibm,pmemory@44100001:
Failed to query performance stats, Err:-10
dev_attr_show: perf_stats_show+0x0/0x1c0 [papr_scm] returned bad count
fill_read_buffer: dev_attr_show+0x0/0xb0 returned bad count

On investigation it looks like that the compiler is silently truncating the return value of drc_pmem_query_stats() from 'long' to 'int', since the variable used to store the return code 'rc' is an 'int'. This truncated value is then returned back as a 'ssize_t' back from perf_stats_show() to 'dev_attr_show()' which thinks of it as a large unsigned number and triggers this warning..

To fix this we update the type of variable 'rc' from 'int' to 'ssize_t' that prevents the compiler from truncating the return value of drc_pmem_query_stats() and returning correct signed value back from perf_stats_show().

Fixes 2d02bf835e57 ("powerpc/papr_scm: Fetch nvdimm performance stats from PHYP")
---
 arch/powerpc/platforms/pseries/papr_scm.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
arch/powerpc/platforms/pseries/papr_scm.c +3 -2
index a88a707a608aa..5493bc847bd08 100644
@@ -785,7 +785,8 @@ static int papr_scm_ndctl(struct nvdimm_bus_descriptor *nd_desc,
 static ssize_t perf_stats_show(struct device *dev,
 			       struct device_attribute *attr, char *buf)
 {
-	int index, rc;
+	int index;
+	ssize_t rc;
 	struct seq_buf s;
 	struct papr_scm_perf_stat *stat;
 	struct papr_scm_perf_stats *stats;
@@ -820,7 +821,7 @@ static ssize_t perf_stats_show(struct device *dev,
 
 free_stats:
 	kfree(stats);
-	return rc ? rc : seq_buf_used(&s);
+	return rc ? rc : (ssize_t)seq_buf_used(&s);
 }
 DEVICE_ATTR_ADMIN_RO(perf_stats);
 
Signature · 1 line
2.25.1
author maintainer
#452 lore raw

PATCH 452/757 RDMA/cma: Combine cma_ndev_work with cma_work

In reply to Greg Kroah-Hartman

From: Jason Gunthorpe <[email protected]>

[ Upstream commit 7e85bcda8bfe883f4244672ed79f81b7762a1a7e ]

These are the same thing, except that cma_ndev_work doesn't have a state transition. Signal no state transition by setting old_state and new_state == 0.

In all cases the handler function should not be called once rdma_destroy_id() has progressed passed setting the state.

---
 drivers/infiniband/core/cma.c | 38 +++++++----------------------------
 1 file changed, 7 insertions(+), 31 deletions(-)
drivers/infiniband/core/cma.c +7 -31
index 5888311b21198..9c3cb8549ac72 100644
@@ -363,12 +363,6 @@ struct cma_work {
 	struct rdma_cm_event	event;
 };
 
-struct cma_ndev_work {
-	struct work_struct	work;
-	struct rdma_id_private	*id;
-	struct rdma_cm_event	event;
-};
-
 struct iboe_mcast_work {
 	struct work_struct	 work;
 	struct rdma_id_private	*id;
@@ -2647,32 +2641,14 @@ static void cma_work_handler(struct work_struct *_work)
 	struct rdma_id_private *id_priv = work->id;
 
 	mutex_lock(&id_priv->handler_mutex);
-	if (!cma_comp_exch(id_priv, work->old_state, work->new_state))
+	if (READ_ONCE(id_priv->state) == RDMA_CM_DESTROYING ||
+	    READ_ONCE(id_priv->state) == RDMA_CM_DEVICE_REMOVAL)
 		goto out_unlock;
-
-	if (cma_cm_event_handler(id_priv, &work->event)) {
-		cma_id_put(id_priv);
-		destroy_id_handler_unlock(id_priv);
-		goto out_free;
+	if (work->old_state != 0 || work->new_state != 0) {
+		if (!cma_comp_exch(id_priv, work->old_state, work->new_state))
+			goto out_unlock;
 	}
 
-out_unlock:
-	mutex_unlock(&id_priv->handler_mutex);
-	cma_id_put(id_priv);
-out_free:
-	kfree(work);
-}
-
-static void cma_ndev_work_handler(struct work_struct *_work)
-{
-	struct cma_ndev_work *work = container_of(_work, struct cma_ndev_work, work);
-	struct rdma_id_private *id_priv = work->id;
-
-	mutex_lock(&id_priv->handler_mutex);
-	if (id_priv->state == RDMA_CM_DESTROYING ||
-	    id_priv->state == RDMA_CM_DEVICE_REMOVAL)
-		goto out_unlock;
-
 	if (cma_cm_event_handler(id_priv, &work->event)) {
 		cma_id_put(id_priv);
 		destroy_id_handler_unlock(id_priv);
@@ -4656,7 +4632,7 @@ EXPORT_SYMBOL(rdma_leave_multicast);
 static int cma_netdev_change(struct net_device *ndev, struct rdma_id_private *id_priv)
 {
 	struct rdma_dev_addr *dev_addr;
-	struct cma_ndev_work *work;
+	struct cma_work *work;
 
 	dev_addr = &id_priv->id.route.addr.dev_addr;
 
@@ -4669,7 +4645,7 @@ static int cma_netdev_change(struct net_device *ndev, struct rdma_id_private *id
 		if (!work)
 			return -ENOMEM;
 
-		INIT_WORK(&work->work, cma_ndev_work_handler);
+		INIT_WORK(&work->work, cma_work_handler);
 		work->id = id_priv;
 		work->event.event = RDMA_CM_EVENT_ADDR_CHANGE;
 		cma_id_get(id_priv);
Signature · 1 line
2.25.1
author maintainer
#453 lore raw

PATCH 453/757 RDMA/cma: Remove dead code for kernel rdmacm multicast

In reply to Greg Kroah-Hartman

From: Jason Gunthorpe <[email protected]>

[ Upstream commit 1bb5091def706732c749df9aae45fbca003696f2 ]

There is no kernel user of RDMA CM multicast so this code managing the multicast subscription of the kernel-only internal QP is dead. Remove it.

This makes the bug fixes in the next patches much simpler.

---
 drivers/infiniband/core/cma.c | 19 ++++---------------
 1 file changed, 4 insertions(+), 15 deletions(-)
drivers/infiniband/core/cma.c +4 -15
index 9c3cb8549ac72..f737f347ae1fc 100644
@@ -4293,16 +4293,6 @@ static int cma_ib_mc_handler(int status, struct ib_sa_multicast *multicast)
 	else
 		pr_debug_ratelimited("RDMA CM: MULTICAST_ERROR: failed to join multicast. status %d\n",
 				     status);
-	mutex_lock(&id_priv->qp_mutex);
-	if (!status && id_priv->id.qp) {
-		status = ib_attach_mcast(id_priv->id.qp, &multicast->rec.mgid,
-					 be16_to_cpu(multicast->rec.mlid));
-		if (status)
-			pr_debug_ratelimited("RDMA CM: MULTICAST_ERROR: failed to attach QP. status %d\n",
-					     status);
-	}
-	mutex_unlock(&id_priv->qp_mutex);
-
 	event.status = status;
 	event.param.ud.private_data = mc->context;
 	if (!status) {
@@ -4555,6 +4545,10 @@ int rdma_join_multicast(struct rdma_cm_id *id, struct sockaddr *addr,
 	struct cma_multicast *mc;
 	int ret;
 
+	/* Not supported for kernel QPs */
+	if (WARN_ON(id->qp))
+		return -EINVAL;
+
 	if (!id->device)
 		return -EINVAL;
 
@@ -4609,11 +4603,6 @@ void rdma_leave_multicast(struct rdma_cm_id *id, struct sockaddr *addr)
 			list_del(&mc->list);
 			spin_unlock_irq(&id_priv->lock);
 
-			if (id->qp)
-				ib_detach_mcast(id->qp,
-						&mc->multicast.ib->rec.mgid,
-						be16_to_cpu(mc->multicast.ib->rec.mlid));
-
 			BUG_ON(id_priv->cma_dev->device != id->device);
 
 			if (rdma_cap_ib_mcast(id->device, id->port_num)) {
Signature · 1 line
2.25.1
author maintainer
#454 lore raw

PATCH 454/757 RDMA/cma: Consolidate the destruction of a cma_multicast in one place

In reply to Greg Kroah-Hartman

From: Jason Gunthorpe <[email protected]>

[ Upstream commit 3788d2997bc0150ea911a964d5b5a2e11808a936 ]

Two places were open coding this sequence, and also pull in cma_leave_roce_mc_group() which was called only once.

---
 drivers/infiniband/core/cma.c | 63 +++++++++++++++++------------------
 1 file changed, 31 insertions(+), 32 deletions(-)
drivers/infiniband/core/cma.c +31 -32
index f737f347ae1fc..da2c06850b303 100644
@@ -1777,19 +1777,30 @@ static void cma_release_port(struct rdma_id_private *id_priv)
 	mutex_unlock(&lock);
 }
 
-static void cma_leave_roce_mc_group(struct rdma_id_private *id_priv,
-				    struct cma_multicast *mc)
+static void destroy_mc(struct rdma_id_private *id_priv,
+		       struct cma_multicast *mc)
 {
-	struct rdma_dev_addr *dev_addr = &id_priv->id.route.addr.dev_addr;
-	struct net_device *ndev = NULL;
+	if (rdma_cap_ib_mcast(id_priv->id.device, id_priv->id.port_num)) {
+		ib_sa_free_multicast(mc->multicast.ib);
+		kfree(mc);
+		return;
+	}
 
-	if (dev_addr->bound_dev_if)
-		ndev = dev_get_by_index(dev_addr->net, dev_addr->bound_dev_if);
-	if (ndev) {
-		cma_igmp_send(ndev, &mc->multicast.ib->rec.mgid, false);
-		dev_put(ndev);
+	if (rdma_protocol_roce(id_priv->id.device,
+				      id_priv->id.port_num)) {
+		struct rdma_dev_addr *dev_addr =
+			&id_priv->id.route.addr.dev_addr;
+		struct net_device *ndev = NULL;
+
+		if (dev_addr->bound_dev_if)
+			ndev = dev_get_by_index(dev_addr->net,
+						dev_addr->bound_dev_if);
+		if (ndev) {
+			cma_igmp_send(ndev, &mc->multicast.ib->rec.mgid, false);
+			dev_put(ndev);
+		}
+		kref_put(&mc->mcref, release_mc);
 	}
-	kref_put(&mc->mcref, release_mc);
 }
 
 static void cma_leave_mc_groups(struct rdma_id_private *id_priv)
@@ -1797,16 +1808,10 @@ static void cma_leave_mc_groups(struct rdma_id_private *id_priv)
 	struct cma_multicast *mc;
 
 	while (!list_empty(&id_priv->mc_list)) {
-		mc = container_of(id_priv->mc_list.next,
-				  struct cma_multicast, list);
+		mc = list_first_entry(&id_priv->mc_list, struct cma_multicast,
+				      list);
 		list_del(&mc->list);
-		if (rdma_cap_ib_mcast(id_priv->cma_dev->device,
-				      id_priv->id.port_num)) {
-			ib_sa_free_multicast(mc->multicast.ib);
-			kfree(mc);
-		} else {
-			cma_leave_roce_mc_group(id_priv, mc);
-		}
+		destroy_mc(id_priv, mc);
 	}
 }
 
@@ -4599,20 +4604,14 @@ void rdma_leave_multicast(struct rdma_cm_id *id, struct sockaddr *addr)
 	id_priv = container_of(id, struct rdma_id_private, id);
 	spin_lock_irq(&id_priv->lock);
 	list_for_each_entry(mc, &id_priv->mc_list, list) {
-		if (!memcmp(&mc->addr, addr, rdma_addr_size(addr))) {
-			list_del(&mc->list);
-			spin_unlock_irq(&id_priv->lock);
-
-			BUG_ON(id_priv->cma_dev->device != id->device);
+		if (memcmp(&mc->addr, addr, rdma_addr_size(addr)) != 0)
+			continue;
+		list_del(&mc->list);
+		spin_unlock_irq(&id_priv->lock);
 
-			if (rdma_cap_ib_mcast(id->device, id->port_num)) {
-				ib_sa_free_multicast(mc->multicast.ib);
-				kfree(mc);
-			} else if (rdma_protocol_roce(id->device, id->port_num)) {
-				cma_leave_roce_mc_group(id_priv, mc);
-			}
-			return;
-		}
+		WARN_ON(id_priv->cma_dev->device != id->device);
+		destroy_mc(id_priv, mc);
+		return;
 	}
 	spin_unlock_irq(&id_priv->lock);
 }
Signature · 1 line
2.25.1
author maintainer
#455 lore raw

PATCH 455/757 RDMA/cma: Fix use after free race in roce multicast join

In reply to Greg Kroah-Hartman

From: Jason Gunthorpe <[email protected]>

[ Upstream commit b5de0c60cc30c2a3513c7188c73f3f29acc29234 ]

The roce path triggers a work queue that continues to touch the id_priv but doesn't hold any reference on it. Futher, unlike in the IB case, the work queue is not fenced during rdma_destroy_id().

This can trigger a use after free if a destroy is triggered in the incredibly narrow window after the queue_work and the work starting and obtaining the handler_mutex.

The only purpose of this work queue is to run the ULP event callback from the standard context, so switch the design to use the existing cma_work_handler() scheme. This simplifies quite a lot of the flow:

- Use the cma_work_handler() callback to launch the work for roce. This requires generating the event synchronously inside the rdma_join_multicast(), which in turn means the dummy struct ib_sa_multicast can become a simple stack variable.

- cm_work_handler() used the id_priv kref, so we can entirely eliminate the kref inside struct cma_multicast. Since the cma_multicast never leaks into an unprotected work queue the kfree can be done at the same time as for IB.

- Eliminating the general multicast.ib requires using cma_set_mgid() in a few places to recompute the mgid.

Fixes 3c86aa70bf67 ("RDMA/cm: Add RDMA CM support for IBoE devices")
---
 drivers/infiniband/core/cma.c | 196 +++++++++++++++-------------------
 1 file changed, 88 insertions(+), 108 deletions(-)
drivers/infiniband/core/cma.c +88 -108
index da2c06850b303..baf0b6ae7a8bb 100644
@@ -68,6 +68,9 @@ static const char * const cma_events[] = {
 	[RDMA_CM_EVENT_TIMEWAIT_EXIT]	 = "timewait exit",
 };
 
+static void cma_set_mgid(struct rdma_id_private *id_priv, struct sockaddr *addr,
+			 union ib_gid *mgid);
+
 const char *__attribute_const__ rdma_event_msg(enum rdma_cm_event_type event)
 {
 	size_t index = event;
@@ -345,13 +348,10 @@ struct ib_device *cma_get_ib_dev(struct cma_device *cma_dev)
 
 struct cma_multicast {
 	struct rdma_id_private *id_priv;
-	union {
-		struct ib_sa_multicast *ib;
-	} multicast;
+	struct ib_sa_multicast *sa_mc;
 	struct list_head	list;
 	void			*context;
 	struct sockaddr_storage	addr;
-	struct kref		mcref;
 	u8			join_state;
 };
 
@@ -363,12 +363,6 @@ struct cma_work {
 	struct rdma_cm_event	event;
 };
 
-struct iboe_mcast_work {
-	struct work_struct	 work;
-	struct rdma_id_private	*id;
-	struct cma_multicast	*mc;
-};
-
 union cma_ip_addr {
 	struct in6_addr ip6;
 	struct {
@@ -477,14 +471,6 @@ static void cma_attach_to_dev(struct rdma_id_private *id_priv,
 					  rdma_start_port(cma_dev->device)];
 }
 
-static inline void release_mc(struct kref *kref)
-{
-	struct cma_multicast *mc = container_of(kref, struct cma_multicast, mcref);
-
-	kfree(mc->multicast.ib);
-	kfree(mc);
-}
-
 static void cma_release_dev(struct rdma_id_private *id_priv)
 {
 	mutex_lock(&lock);
@@ -1780,14 +1766,10 @@ static void cma_release_port(struct rdma_id_private *id_priv)
 static void destroy_mc(struct rdma_id_private *id_priv,
 		       struct cma_multicast *mc)
 {
-	if (rdma_cap_ib_mcast(id_priv->id.device, id_priv->id.port_num)) {
-		ib_sa_free_multicast(mc->multicast.ib);
-		kfree(mc);
-		return;
-	}
+	if (rdma_cap_ib_mcast(id_priv->id.device, id_priv->id.port_num))
+		ib_sa_free_multicast(mc->sa_mc);
 
-	if (rdma_protocol_roce(id_priv->id.device,
-				      id_priv->id.port_num)) {
+	if (rdma_protocol_roce(id_priv->id.device, id_priv->id.port_num)) {
 		struct rdma_dev_addr *dev_addr =
 			&id_priv->id.route.addr.dev_addr;
 		struct net_device *ndev = NULL;
@@ -1796,11 +1778,15 @@ static void destroy_mc(struct rdma_id_private *id_priv,
 			ndev = dev_get_by_index(dev_addr->net,
 						dev_addr->bound_dev_if);
 		if (ndev) {
-			cma_igmp_send(ndev, &mc->multicast.ib->rec.mgid, false);
+			union ib_gid mgid;
+
+			cma_set_mgid(id_priv, (struct sockaddr *)&mc->addr,
+				     &mgid);
+			cma_igmp_send(ndev, &mgid, false);
 			dev_put(ndev);
 		}
-		kref_put(&mc->mcref, release_mc);
 	}
+	kfree(mc);
 }
 
 static void cma_leave_mc_groups(struct rdma_id_private *id_priv)
@@ -2664,6 +2650,8 @@ static void cma_work_handler(struct work_struct *_work)
 	mutex_unlock(&id_priv->handler_mutex);
 	cma_id_put(id_priv);
 out_free:
+	if (work->event.event == RDMA_CM_EVENT_MULTICAST_JOIN)
+		rdma_destroy_ah_attr(&work->event.param.ud.ah_attr);
 	kfree(work);
 }
 
@@ -4280,53 +4268,66 @@ int rdma_disconnect(struct rdma_cm_id *id)
 }
 EXPORT_SYMBOL(rdma_disconnect);
 
+static void cma_make_mc_event(int status, struct rdma_id_private *id_priv,
+			      struct ib_sa_multicast *multicast,
+			      struct rdma_cm_event *event,
+			      struct cma_multicast *mc)
+{
+	struct rdma_dev_addr *dev_addr;
+	enum ib_gid_type gid_type;
+	struct net_device *ndev;
+
+	if (!status)
+		status = cma_set_qkey(id_priv, be32_to_cpu(multicast->rec.qkey));
+	else
+		pr_debug_ratelimited("RDMA CM: MULTICAST_ERROR: failed to join multicast. status %d\n",
+				     status);
+
+	event->status = status;
+	event->param.ud.private_data = mc->context;
+	if (status) {
+		event->event = RDMA_CM_EVENT_MULTICAST_ERROR;
+		return;
+	}
+
+	dev_addr = &id_priv->id.route.addr.dev_addr;
+	ndev = dev_get_by_index(dev_addr->net, dev_addr->bound_dev_if);
+	gid_type =
+		id_priv->cma_dev
+			->default_gid_type[id_priv->id.port_num -
+					   rdma_start_port(
+						   id_priv->cma_dev->device)];
+
+	event->event = RDMA_CM_EVENT_MULTICAST_JOIN;
+	if (ib_init_ah_from_mcmember(id_priv->id.device, id_priv->id.port_num,
+				     &multicast->rec, ndev, gid_type,
+				     &event->param.ud.ah_attr)) {
+		event->event = RDMA_CM_EVENT_MULTICAST_ERROR;
+		goto out;
+	}
+
+	event->param.ud.qp_num = 0xFFFFFF;
+	event->param.ud.qkey = be32_to_cpu(multicast->rec.qkey);
+
+out:
+	if (ndev)
+		dev_put(ndev);
+}
+
 static int cma_ib_mc_handler(int status, struct ib_sa_multicast *multicast)
 {
-	struct rdma_id_private *id_priv;
 	struct cma_multicast *mc = multicast->context;
+	struct rdma_id_private *id_priv = mc->id_priv;
 	struct rdma_cm_event event = {};
 	int ret = 0;
 
-	id_priv = mc->id_priv;
 	mutex_lock(&id_priv->handler_mutex);
 	if (id_priv->state != RDMA_CM_ADDR_BOUND &&
 	    id_priv->state != RDMA_CM_ADDR_RESOLVED)
 		goto out;
 
-	if (!status)
-		status = cma_set_qkey(id_priv, be32_to_cpu(multicast->rec.qkey));
-	else
-		pr_debug_ratelimited("RDMA CM: MULTICAST_ERROR: failed to join multicast. status %d\n",
-				     status);
-	event.status = status;
-	event.param.ud.private_data = mc->context;
-	if (!status) {
-		struct rdma_dev_addr *dev_addr =
-			&id_priv->id.route.addr.dev_addr;
-		struct net_device *ndev =
-			dev_get_by_index(dev_addr->net, dev_addr->bound_dev_if);
-		enum ib_gid_type gid_type =
-			id_priv->cma_dev->default_gid_type[id_priv->id.port_num -
-			rdma_start_port(id_priv->cma_dev->device)];
-
-		event.event = RDMA_CM_EVENT_MULTICAST_JOIN;
-		ret = ib_init_ah_from_mcmember(id_priv->id.device,
-					       id_priv->id.port_num,
-					       &multicast->rec,
-					       ndev, gid_type,
-					       &event.param.ud.ah_attr);
-		if (ret)
-			event.event = RDMA_CM_EVENT_MULTICAST_ERROR;
-
-		event.param.ud.qp_num = 0xFFFFFF;
-		event.param.ud.qkey = be32_to_cpu(multicast->rec.qkey);
-		if (ndev)
-			dev_put(ndev);
-	} else
-		event.event = RDMA_CM_EVENT_MULTICAST_ERROR;
-
+	cma_make_mc_event(status, id_priv, multicast, &event, mc);
 	ret = cma_cm_event_handler(id_priv, &event);
-
 	rdma_destroy_ah_attr(&event.param.ud.ah_attr);
 	if (ret) {
 		destroy_id_handler_unlock(id_priv);
@@ -4416,23 +4417,10 @@ static int cma_join_ib_multicast(struct rdma_id_private *id_priv,
 			     IB_SA_MCMEMBER_REC_MTU |
 			     IB_SA_MCMEMBER_REC_HOP_LIMIT;
 
-	mc->multicast.ib = ib_sa_join_multicast(&sa_client, id_priv->id.device,
-						id_priv->id.port_num, &rec,
-						comp_mask, GFP_KERNEL,
-						cma_ib_mc_handler, mc);
-	return PTR_ERR_OR_ZERO(mc->multicast.ib);
-}
-
-static void iboe_mcast_work_handler(struct work_struct *work)
-{
-	struct iboe_mcast_work *mw = container_of(work, struct iboe_mcast_work, work);
-	struct cma_multicast *mc = mw->mc;
-	struct ib_sa_multicast *m = mc->multicast.ib;
-
-	mc->multicast.ib->context = mc;
-	cma_ib_mc_handler(0, m);
-	kref_put(&mc->mcref, release_mc);
-	kfree(mw);
+	mc->sa_mc = ib_sa_join_multicast(&sa_client, id_priv->id.device,
+					 id_priv->id.port_num, &rec, comp_mask,
+					 GFP_KERNEL, cma_ib_mc_handler, mc);
+	return PTR_ERR_OR_ZERO(mc->sa_mc);
 }
 
 static void cma_iboe_set_mgid(struct sockaddr *addr, union ib_gid *mgid,
@@ -4467,52 +4455,47 @@ static void cma_iboe_set_mgid(struct sockaddr *addr, union ib_gid *mgid,
 static int cma_iboe_join_multicast(struct rdma_id_private *id_priv,
 				   struct cma_multicast *mc)
 {
-	struct iboe_mcast_work *work;
+	struct cma_work *work;
 	struct rdma_dev_addr *dev_addr = &id_priv->id.route.addr.dev_addr;
 	int err = 0;
 	struct sockaddr *addr = (struct sockaddr *)&mc->addr;
 	struct net_device *ndev = NULL;
+	struct ib_sa_multicast ib;
 	enum ib_gid_type gid_type;
 	bool send_only;
 
 	send_only = mc->join_state == BIT(SENDONLY_FULLMEMBER_JOIN);
 
-	if (cma_zero_addr((struct sockaddr *)&mc->addr))
+	if (cma_zero_addr(addr))
 		return -EINVAL;
 
 	work = kzalloc(sizeof *work, GFP_KERNEL);
 	if (!work)
 		return -ENOMEM;
 
-	mc->multicast.ib = kzalloc(sizeof(struct ib_sa_multicast), GFP_KERNEL);
-	if (!mc->multicast.ib) {
-		err = -ENOMEM;
-		goto out1;
-	}
-
 	gid_type = id_priv->cma_dev->default_gid_type[id_priv->id.port_num -
 		   rdma_start_port(id_priv->cma_dev->device)];
-	cma_iboe_set_mgid(addr, &mc->multicast.ib->rec.mgid, gid_type);
+	cma_iboe_set_mgid(addr, &ib.rec.mgid, gid_type);
 
-	mc->multicast.ib->rec.pkey = cpu_to_be16(0xffff);
+	ib.rec.pkey = cpu_to_be16(0xffff);
 	if (id_priv->id.ps == RDMA_PS_UDP)
-		mc->multicast.ib->rec.qkey = cpu_to_be32(RDMA_UDP_QKEY);
+		ib.rec.qkey = cpu_to_be32(RDMA_UDP_QKEY);
 
 	if (dev_addr->bound_dev_if)
 		ndev = dev_get_by_index(dev_addr->net, dev_addr->bound_dev_if);
 	if (!ndev) {
 		err = -ENODEV;
-		goto out2;
+		goto err_free;
 	}
-	mc->multicast.ib->rec.rate = iboe_get_rate(ndev);
-	mc->multicast.ib->rec.hop_limit = 1;
-	mc->multicast.ib->rec.mtu = iboe_get_mtu(ndev->mtu);
+	ib.rec.rate = iboe_get_rate(ndev);
+	ib.rec.hop_limit = 1;
+	ib.rec.mtu = iboe_get_mtu(ndev->mtu);
 
 	if (addr->sa_family == AF_INET) {
 		if (gid_type == IB_GID_TYPE_ROCE_UDP_ENCAP) {
-			mc->multicast.ib->rec.hop_limit = IPV6_DEFAULT_HOPLIMIT;
+			ib.rec.hop_limit = IPV6_DEFAULT_HOPLIMIT;
 			if (!send_only) {
-				err = cma_igmp_send(ndev, &mc->multicast.ib->rec.mgid,
+				err = cma_igmp_send(ndev, &ib.rec.mgid,
 						    true);
 			}
 		}
@@ -4521,24 +4504,22 @@ static int cma_iboe_join_multicast(struct rdma_id_private *id_priv,
 			err = -ENOTSUPP;
 	}
 	dev_put(ndev);
-	if (err || !mc->multicast.ib->rec.mtu) {
+	if (err || !ib.rec.mtu) {
 		if (!err)
 			err = -EINVAL;
-		goto out2;
+		goto err_free;
 	}
 	rdma_ip2gid((struct sockaddr *)&id_priv->id.route.addr.src_addr,
-		    &mc->multicast.ib->rec.port_gid);
+		    &ib.rec.port_gid);
 	work->id = id_priv;
-	work->mc = mc;
-	INIT_WORK(&work->work, iboe_mcast_work_handler);
-	kref_get(&mc->mcref);
+	INIT_WORK(&work->work, cma_work_handler);
+	cma_make_mc_event(0, id_priv, &ib, &work->event, mc);
+	/* Balances with cma_id_put() in cma_work_handler */
+	cma_id_get(id_priv);
 	queue_work(cma_wq, &work->work);
-
 	return 0;
 
-out2:
-	kfree(mc->multicast.ib);
-out1:
+err_free:
 	kfree(work);
 	return err;
 }
@@ -4562,7 +4543,7 @@ int rdma_join_multicast(struct rdma_cm_id *id, struct sockaddr *addr,
 	    !cma_comp(id_priv, RDMA_CM_ADDR_RESOLVED))
 		return -EINVAL;
 
-	mc = kmalloc(sizeof *mc, GFP_KERNEL);
+	mc = kzalloc(sizeof(*mc), GFP_KERNEL);
 	if (!mc)
 		return -ENOMEM;
 
@@ -4572,7 +4553,6 @@ int rdma_join_multicast(struct rdma_cm_id *id, struct sockaddr *addr,
 	mc->join_state = join_state;
 
 	if (rdma_protocol_roce(id->device, id->port_num)) {
-		kref_init(&mc->mcref);
 		ret = cma_iboe_join_multicast(id_priv, mc);
 		if (ret)
 			goto out_err;
Signature · 1 line
2.25.1
author maintainer
#456 lore raw

PATCH 456/757 perf intel-pt: Fix "context_switch event has no tid" error

In reply to Greg Kroah-Hartman

From: Adrian Hunter <[email protected]>

[ Upstream commit 7d537a8d2e76bc4fc71e34545ceaa463ac2cd928 ]

A context_switch event can have no tid because pids can be detached from a task while the task is still running (in do_exit()). Note this won't happen with per-task contexts because then tracing stops at perf_event_exit_task()

If a task with no tid gets preempted, or a dying task gets preempted and its parent releases it, when it subsequently gets switched back in, Intel PT will not be able to determine what task is running and prints an error "context_switch event has no tid". However, it is not really an error because the task is in kernel space and the decoder can continue to decode successfully. Fix by changing the error to be only a logged message, and make allowance for tid == -1.

Example:

Using 5.9-rc4 with Preemptible Kernel (Low-Latency Desktop) e.g.

  $ uname -r
  5.9.0-rc4
  $ grep PREEMPT .config
  # CONFIG_PREEMPT_NONE is not set
  # CONFIG_PREEMPT_VOLUNTARY is not set
  CONFIG_PREEMPT=y
  CONFIG_PREEMPT_COUNT=y
  CONFIG_PREEMPTION=y
  CONFIG_PREEMPT_RCU=y
  CONFIG_PREEMPT_NOTIFIERS=y
  CONFIG_DRM_I915_PREEMPT_TIMEOUT=640
  CONFIG_DEBUG_PREEMPT=y
  # CONFIG_PREEMPT_TRACER is not set
  # CONFIG_PREEMPTIRQ_DELAY_TEST is not set

Before:

  $ cat forkit.c
  #include <sys/types.h>
  #include <unistd.h>
  #include <sys/wait.h>

  int main()
  {
          pid_t child;
          int status = 0;
          child = fork();
          if (child == 0)
                  return 123;
          wait(&status);
          return 0;

}

  $ gcc -o forkit forkit.c
  $ sudo ~/bin/perf record --kcore -a -m,64M -e intel_pt/cyc/k &
  [1] 11016
  $ taskset 2 ./forkit
  $ sudo pkill perf
  $ [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 17.262 MB perf.data ]
  [1]+  Terminated              sudo ~/bin/perf record --kcore -a -m,64M -e intel_pt/cyc/k
  $ sudo ~/bin/perf script --show-task-events --show-switch-events --itrace=iqqe-o -C 1 --ns | grep -C 2 forkit
  context_switch event has no tid
           taskset 11019 [001] 66663.270045029:          1 instructions:k:  ffffffffb1d9f844 strnlen_user+0xb4 ([kernel.kallsyms])
           taskset 11019 [001] 66663.270201816:          1 instructions:k:  ffffffffb1a83121 unmap_page_range+0x561 ([kernel.kallsyms])
            forkit 11019 [001] 66663.270327553: PERF_RECORD_COMM exec: forkit:11019/11019
            forkit 11019 [001] 66663.270420028:          1 instructions:k:  ffffffffb1db9537 __clear_user+0x27 ([kernel.kallsyms])
            forkit 11019 [001] 66663.270648704:          1 instructions:k:  ffffffffb18829e6 do_user_addr_fault+0xf6 ([kernel.kallsyms])
            forkit 11019 [001] 66663.270833163:          1 instructions:k:  ffffffffb230a825 irqentry_exit_to_user_mode+0x15 ([kernel.kallsyms])
            forkit 11019 [001] 66663.271092359:          1 instructions:k:  ffffffffb1aea3d9 lock_page_memcg+0x9 ([kernel.kallsyms])
            forkit 11019 [001] 66663.271207092: PERF_RECORD_FORK(11020:11020):(11019:11019)
            forkit 11019 [001] 66663.271234775: PERF_RECORD_SWITCH_CPU_WIDE OUT          next pid/tid: 11020/11020
            forkit 11020 [001] 66663.271238407: PERF_RECORD_SWITCH_CPU_WIDE IN           prev pid/tid: 11019/11019
            forkit 11020 [001] 66663.271312066:          1 instructions:k:  ffffffffb1a88140 handle_mm_fault+0x10 ([kernel.kallsyms])
            forkit 11020 [001] 66663.271476225: PERF_RECORD_EXIT(11020:11020):(11019:11019)
            forkit 11020 [001] 66663.271497488: PERF_RECORD_SWITCH_CPU_WIDE OUT preempt  next pid/tid: 11019/11019
            forkit 11019 [001] 66663.271500523: PERF_RECORD_SWITCH_CPU_WIDE IN           prev pid/tid: 11020/11020
            forkit 11019 [001] 66663.271517241:          1 instructions:k:  ffffffffb24012cd error_entry+0x6d ([kernel.kallsyms])
            forkit 11019 [001] 66663.271664080: PERF_RECORD_EXIT(11019:11019):(1386:1386)

After:

  $ sudo ~/bin/perf script --show-task-events --show-switch-events --itrace=iqqe-o -C 1 --ns | grep -C 2 forkit
           taskset 11019 [001] 66663.270045029:          1 instructions:k:  ffffffffb1d9f844 strnlen_user+0xb4 ([kernel.kallsyms])
           taskset 11019 [001] 66663.270201816:          1 instructions:k:  ffffffffb1a83121 unmap_page_range+0x561 ([kernel.kallsyms])
            forkit 11019 [001] 66663.270327553: PERF_RECORD_COMM exec: forkit:11019/11019
            forkit 11019 [001] 66663.270420028:          1 instructions:k:  ffffffffb1db9537 __clear_user+0x27 ([kernel.kallsyms])
            forkit 11019 [001] 66663.270648704:          1 instructions:k:  ffffffffb18829e6 do_user_addr_fault+0xf6 ([kernel.kallsyms])
            forkit 11019 [001] 66663.270833163:          1 instructions:k:  ffffffffb230a825 irqentry_exit_to_user_mode+0x15 ([kernel.kallsyms])
            forkit 11019 [001] 66663.271092359:          1 instructions:k:  ffffffffb1aea3d9 lock_page_memcg+0x9 ([kernel.kallsyms])
            forkit 11019 [001] 66663.271207092: PERF_RECORD_FORK(11020:11020):(11019:11019)
            forkit 11019 [001] 66663.271234775: PERF_RECORD_SWITCH_CPU_WIDE OUT          next pid/tid: 11020/11020
            forkit 11020 [001] 66663.271238407: PERF_RECORD_SWITCH_CPU_WIDE IN           prev pid/tid: 11019/11019
            forkit 11020 [001] 66663.271312066:          1 instructions:k:  ffffffffb1a88140 handle_mm_fault+0x10 ([kernel.kallsyms])
            forkit 11020 [001] 66663.271476225: PERF_RECORD_EXIT(11020:11020):(11019:11019)
            forkit 11020 [001] 66663.271497488: PERF_RECORD_SWITCH_CPU_WIDE OUT preempt  next pid/tid: 11019/11019
            forkit 11019 [001] 66663.271500523: PERF_RECORD_SWITCH_CPU_WIDE IN           prev pid/tid: 11020/11020
            forkit 11019 [001] 66663.271517241:          1 instructions:k:  ffffffffb24012cd error_entry+0x6d ([kernel.kallsyms])
            forkit 11019 [001] 66663.271664080: PERF_RECORD_EXIT(11019:11019):(1386:1386)
            forkit 11019 [001] 66663.271688752: PERF_RECORD_SWITCH_CPU_WIDE OUT          next pid/tid:    -1/-1
               :-1    -1 [001] 66663.271692086: PERF_RECORD_SWITCH_CPU_WIDE IN           prev pid/tid: 11019/11019
                :-1    -1 [001] 66663.271707466:          1 instructions:k:  ffffffffb18eb096 update_load_avg+0x306 ([kernel.kallsyms])
Fixes 86c2786994bd7c ("perf intel-pt: Add support for PERF_RECORD_SWITCH")
Cc Andi Kleen <[email protected]>
Cc Jiri Olsa <[email protected]>
Cc Yu-cheng Yu <[email protected]>
---
 tools/perf/util/intel-pt.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
tools/perf/util/intel-pt.c +4 -4
index 0af4e81c46e2b..3a0348caec7d6 100644
@@ -1101,6 +1101,8 @@ static void intel_pt_set_pid_tid_cpu(struct intel_pt *pt,
 
 	if (queue->tid == -1 || pt->have_sched_switch) {
 		ptq->tid = machine__get_current_tid(pt->machine, ptq->cpu);
+		if (ptq->tid == -1)
+			ptq->pid = -1;
 		thread__zput(ptq->thread);
 	}
 
@@ -2603,10 +2605,8 @@ static int intel_pt_context_switch(struct intel_pt *pt, union perf_event *event,
 		tid = sample->tid;
 	}
 
-	if (tid == -1) {
-		pr_err("context_switch event has no tid\n");
-		return -EINVAL;
-	}
+	if (tid == -1)
+		intel_pt_log("context_switch event has no tid\n");
 
 	ret = intel_pt_sync_switch(pt, cpu, tid, sample->time);
 	if (ret <= 0)
Signature · 1 line
2.25.1
author maintainer
#457 lore raw

PATCH 457/757 perf metricgroup: Fix uncore metric expressions

In reply to Greg Kroah-Hartman

From: Ian Rogers <[email protected]>

[ Upstream commit dcc81be0fc4e66943041e6e19a5faf8f8704a27e ]

A metric like DRAM_BW_Use has on SkylakeX events uncore_imc/cas_count_read/ and uncore_imc/case_count_write/.

These events open 6 events per socket with pmu names of uncore_imc_[0-5].

The current metric setup code in find_evsel_group assumes one ID will map to 1 event to be recorded in metric_events.

For events with multiple matches, the first event is recorded in metric_events (avoiding matching >1 event with the same name) and the evlist_used updated so that duplicate events aren't removed when the evlist has unused events removed.

Before this change:

  $ /tmp/perf/perf stat -M DRAM_BW_Use -a -- sleep 1

Performance counter stats for 'system wide':

               41.14 MiB  uncore_imc/cas_count_read/
       1,002,614,251 ns   duration_time

         1.002614251 seconds time elapsed

After this change:

  $ /tmp/perf/perf stat -M DRAM_BW_Use -a -- sleep 1

Performance counter stats for 'system wide':

              157.47 MiB  uncore_imc/cas_count_read/ #     0.00 DRAM_BW_Use
              126.97 MiB  uncore_imc/cas_count_write/
       1,003,019,728 ns   duration_time

Erroneous duplication introduced in:
commit 2440689d62e9 ("perf metricgroup: Remove duped metric group events").

Fixes ded80bda8bc9 ("perf expr: Migrate expr ids table to a hashmap").
Cc Adrian Hunter <[email protected]>
Cc Alexander Shishkin <[email protected]>
Cc Alexei Starovoitov <[email protected]>
Cc Andi Kleen <[email protected]>
Cc Andrii Nakryiko <[email protected]>
Cc Athira Jajeev <[email protected]>
Cc Daniel Borkmann <[email protected]>
Cc Jiri Olsa <[email protected]>
Cc John Fastabend <[email protected]>
Cc KP Singh <[email protected]>
Cc Mark Rutland <[email protected]>
Cc Martin KaFai Lau <[email protected]>
Cc Namhyung Kim <[email protected]>
Cc Peter Zijlstra <[email protected]>
Cc Song Liu <[email protected]>
Cc Stephane Eranian <[email protected]>
Cc Yonghong Song <[email protected]>
---
 tools/perf/util/metricgroup.c | 75 ++++++++++++++++++++++++++---------
 1 file changed, 56 insertions(+), 19 deletions(-)
tools/perf/util/metricgroup.c +56 -19
index ab5030fcfed4e..d948a7f910cfa 100644
@@ -150,6 +150,18 @@ static void expr_ids__exit(struct expr_ids *ids)
 		free(ids->id[i].id);
 }
 
+static bool contains_event(struct evsel **metric_events, int num_events,
+			const char *event_name)
+{
+	int i;
+
+	for (i = 0; i < num_events; i++) {
+		if (!strcmp(metric_events[i]->name, event_name))
+			return true;
+	}
+	return false;
+}
+
 /**
  * Find a group of events in perf_evlist that correpond to those from a parsed
  * metric expression. Note, as find_evsel_group is called in the same order as
@@ -180,7 +192,11 @@ static struct evsel *find_evsel_group(struct evlist *perf_evlist,
 	int i = 0, matched_events = 0, events_to_match;
 	const int idnum = (int)hashmap__size(&pctx->ids);
 
-	/* duration_time is grouped separately. */
+	/*
+	 * duration_time is always grouped separately, when events are grouped
+	 * (ie has_constraint is false) then ignore it in the matching loop and
+	 * add it to metric_events at the end.
+	 */
 	if (!has_constraint &&
 	    hashmap__find(&pctx->ids, "duration_time", (void **)&val_ptr))
 		events_to_match = idnum - 1;
@@ -207,23 +223,20 @@ static struct evsel *find_evsel_group(struct evlist *perf_evlist,
 				sizeof(struct evsel *) * idnum);
 			current_leader = ev->leader;
 		}
-		if (hashmap__find(&pctx->ids, ev->name, (void **)&val_ptr)) {
-			if (has_constraint) {
-				/*
-				 * Events aren't grouped, ensure the same event
-				 * isn't matched from two groups.
-				 */
-				for (i = 0; i < matched_events; i++) {
-					if (!strcmp(ev->name,
-						    metric_events[i]->name)) {
-						break;
-					}
-				}
-				if (i != matched_events)
-					continue;
-			}
+		/*
+		 * Check for duplicate events with the same name. For example,
+		 * uncore_imc/cas_count_read/ will turn into 6 events per socket
+		 * on skylakex. Only the first such event is placed in
+		 * metric_events. If events aren't grouped then this also
+		 * ensures that the same event in different sibling groups
+		 * aren't both added to metric_events.
+		 */
+		if (contains_event(metric_events, matched_events, ev->name))
+			continue;
+		/* Does this event belong to the parse context? */
+		if (hashmap__find(&pctx->ids, ev->name, (void **)&val_ptr))
 			metric_events[matched_events++] = ev;
-		}
+
 		if (matched_events == events_to_match)
 			break;
 	}
@@ -239,7 +252,7 @@ static struct evsel *find_evsel_group(struct evlist *perf_evlist,
 	}
 
 	if (matched_events != idnum) {
-		/* Not whole match */
+		/* Not a whole match */
 		return NULL;
 	}
 
@@ -247,8 +260,32 @@ static struct evsel *find_evsel_group(struct evlist *perf_evlist,
 
 	for (i = 0; i < idnum; i++) {
 		ev = metric_events[i];
-		ev->metric_leader = ev;
+		/* Don't free the used events. */
 		set_bit(ev->idx, evlist_used);
+		/*
+		 * The metric leader points to the identically named event in
+		 * metric_events.
+		 */
+		ev->metric_leader = ev;
+		/*
+		 * Mark two events with identical names in the same group (or
+		 * globally) as being in use as uncore events may be duplicated
+		 * for each pmu. Set the metric leader of such events to be the
+		 * event that appears in metric_events.
+		 */
+		evlist__for_each_entry_continue(perf_evlist, ev) {
+			/*
+			 * If events are grouped then the search can terminate
+			 * when then group is left.
+			 */
+			if (!has_constraint &&
+			    ev->leader != metric_events[i]->leader)
+				break;
+			if (!strcmp(metric_events[i]->name, ev->name)) {
+				set_bit(ev->idx, evlist_used);
+				ev->metric_leader = metric_events[i];
+			}
+		}
 	}
 
 	return metric_events[0];
Signature · 1 line
2.25.1
author maintainer
#458 lore raw

PATCH 458/757 RDMA/qedr: Fix resource leak in qedr_create_qp

In reply to Greg Kroah-Hartman

From: Keita Suzuki <[email protected]>

[ Upstream commit 3e45410fe3c202ffb619f301beff0644f717e132 ]

When xa_insert() fails, the acquired resource in qedr_create_qp should also be freed. However, current implementation does not handle the error.

Fix this by adding a new goto label that calls qedr_free_qp_resources.

Fixes 1212767e23bb ("qedr: Add wrapping generic structure for qpidr and adjust idr routines.")
---
 drivers/infiniband/hw/qedr/verbs.c | 52 ++++++++++++++++--------------
 1 file changed, 27 insertions(+), 25 deletions(-)
drivers/infiniband/hw/qedr/verbs.c +27 -25
index db6be39834128..10536cce120e8 100644
@@ -2113,6 +2113,28 @@ static int qedr_create_kernel_qp(struct qedr_dev *dev,
 	return rc;
 }
 
+static int qedr_free_qp_resources(struct qedr_dev *dev, struct qedr_qp *qp,
+				  struct ib_udata *udata)
+{
+	struct qedr_ucontext *ctx =
+		rdma_udata_to_drv_context(udata, struct qedr_ucontext,
+					  ibucontext);
+	int rc;
+
+	if (qp->qp_type != IB_QPT_GSI) {
+		rc = dev->ops->rdma_destroy_qp(dev->rdma_ctx, qp->qed_qp);
+		if (rc)
+			return rc;
+	}
+
+	if (qp->create_type == QEDR_QP_CREATE_USER)
+		qedr_cleanup_user(dev, ctx, qp);
+	else
+		qedr_cleanup_kernel(dev, qp);
+
+	return 0;
+}
+
 struct ib_qp *qedr_create_qp(struct ib_pd *ibpd,
 			     struct ib_qp_init_attr *attrs,
 			     struct ib_udata *udata)
@@ -2159,19 +2181,21 @@ struct ib_qp *qedr_create_qp(struct ib_pd *ibpd,
 		rc = qedr_create_kernel_qp(dev, qp, ibpd, attrs);
 
 	if (rc)
-		goto err;
+		goto out_free_qp;
 
 	qp->ibqp.qp_num = qp->qp_id;
 
 	if (rdma_protocol_iwarp(&dev->ibdev, 1)) {
 		rc = xa_insert(&dev->qps, qp->qp_id, qp, GFP_KERNEL);
 		if (rc)
-			goto err;
+			goto out_free_qp_resources;
 	}
 
 	return &qp->ibqp;
 
-err:
+out_free_qp_resources:
+	qedr_free_qp_resources(dev, qp, udata);
+out_free_qp:
 	kfree(qp);
 
 	return ERR_PTR(-EFAULT);
@@ -2672,28 +2696,6 @@ int qedr_query_qp(struct ib_qp *ibqp,
 	return rc;
 }
 
-static int qedr_free_qp_resources(struct qedr_dev *dev, struct qedr_qp *qp,
-				  struct ib_udata *udata)
-{
-	struct qedr_ucontext *ctx =
-		rdma_udata_to_drv_context(udata, struct qedr_ucontext,
-					  ibucontext);
-	int rc;
-
-	if (qp->qp_type != IB_QPT_GSI) {
-		rc = dev->ops->rdma_destroy_qp(dev->rdma_ctx, qp->qed_qp);
-		if (rc)
-			return rc;
-	}
-
-	if (qp->create_type == QEDR_QP_CREATE_USER)
-		qedr_cleanup_user(dev, ctx, qp);
-	else
-		qedr_cleanup_kernel(dev, qp);
-
-	return 0;
-}
-
 int qedr_destroy_qp(struct ib_qp *ibqp, struct ib_udata *udata)
 {
 	struct qedr_qp *qp = get_qedr_qp(ibqp);
Signature · 1 line
2.25.1
author maintainer
#459 lore raw

PATCH 459/757 RDMA/hns: Set the unsupported wr opcode

In reply to Greg Kroah-Hartman

From: Lijun Ou <[email protected]>

[ Upstream commit 22d3e1ed2cc837af87f76c3c8a4ccf4455e225c5 ]

hip06 does not support IB_WR_LOCAL_INV, so the ps_opcode should be set to an invalid value instead of being left uninitialized.

Fixes 9a4435375cd1 ("IB/hns: Add driver files for hns RoCE driver")
Fixes a2f3d4479fe9 ("RDMA/hns: Avoid unncessary initialization")
---
 drivers/infiniband/hw/hns/hns_roce_hw_v1.c | 1 -
 1 file changed, 1 deletion(-)
drivers/infiniband/hw/hns/hns_roce_hw_v1.c +0 -1
index 109f42458c026..eac971c663791 100644
@@ -271,7 +271,6 @@ static int hns_roce_v1_post_send(struct ib_qp *ibqp,
 				ps_opcode = HNS_ROCE_WQE_OPCODE_SEND;
 				break;
 			case IB_WR_LOCAL_INV:
-				break;
 			case IB_WR_ATOMIC_CMP_AND_SWP:
 			case IB_WR_ATOMIC_FETCH_AND_ADD:
 			case IB_WR_LSO:
Signature · 1 line
2.25.1
author maintainer
#460 lore raw

PATCH 460/757 RDMA/mlx5: Use set_mkc_access_pd_addr_fields() in reg_create()

In reply to Greg Kroah-Hartman

From: Jason Gunthorpe <[email protected]>

[ Upstream commit 1c97ca3da0d12e0156a177f48ed3184c3f202002 ]

reg_create() open codes this helper, use the shared code.

---
 drivers/infiniband/hw/mlx5/mr.c | 15 +--------------
 1 file changed, 1 insertion(+), 14 deletions(-)
drivers/infiniband/hw/mlx5/mr.c +1 -14
index 3e6f2f9c66555..8f5d36f32529e 100644
@@ -1190,29 +1190,16 @@ static struct mlx5_ib_mr *reg_create(struct ib_mr *ibmr, struct ib_pd *pd,
 	MLX5_SET(create_mkey_in, in, pg_access, !!(pg_cap));
 
 	mkc = MLX5_ADDR_OF(create_mkey_in, in, memory_key_mkey_entry);
+	set_mkc_access_pd_addr_fields(mkc, access_flags, virt_addr, pd);
 	MLX5_SET(mkc, mkc, free, !populate);
 	MLX5_SET(mkc, mkc, access_mode_1_0, MLX5_MKC_ACCESS_MODE_MTT);
-	if (MLX5_CAP_GEN(dev->mdev, relaxed_ordering_write))
-		MLX5_SET(mkc, mkc, relaxed_ordering_write,
-			 !!(access_flags & IB_ACCESS_RELAXED_ORDERING));
-	if (MLX5_CAP_GEN(dev->mdev, relaxed_ordering_read))
-		MLX5_SET(mkc, mkc, relaxed_ordering_read,
-			 !!(access_flags & IB_ACCESS_RELAXED_ORDERING));
-	MLX5_SET(mkc, mkc, a, !!(access_flags & IB_ACCESS_REMOTE_ATOMIC));
-	MLX5_SET(mkc, mkc, rw, !!(access_flags & IB_ACCESS_REMOTE_WRITE));
-	MLX5_SET(mkc, mkc, rr, !!(access_flags & IB_ACCESS_REMOTE_READ));
-	MLX5_SET(mkc, mkc, lw, !!(access_flags & IB_ACCESS_LOCAL_WRITE));
-	MLX5_SET(mkc, mkc, lr, 1);
 	MLX5_SET(mkc, mkc, umr_en, 1);
 
-	MLX5_SET64(mkc, mkc, start_addr, virt_addr);
 	MLX5_SET64(mkc, mkc, len, length);
-	MLX5_SET(mkc, mkc, pd, to_mpd(pd)->pdn);
 	MLX5_SET(mkc, mkc, bsf_octword_size, 0);
 	MLX5_SET(mkc, mkc, translations_octword_size,
 		 get_octo_len(virt_addr, length, page_shift));
 	MLX5_SET(mkc, mkc, log_page_size, page_shift);
-	MLX5_SET(mkc, mkc, qpn, 0xffffff);
 	if (populate) {
 		MLX5_SET(create_mkey_in, in, translations_octword_actual_size,
 			 get_octo_len(virt_addr, length, page_shift));
Signature · 1 line
2.25.1
author maintainer
#461 lore raw

PATCH 461/757 RDMA/mlx5: Make mkeys always owned by the kernels PD when not enabled

In reply to Greg Kroah-Hartman

From: Jason Gunthorpe <[email protected]>

[ Upstream commit 5eb29f0d13a66502b91954597270003c90fb66c5 ]

Any mkey that is not enabled and assigned to userspace should have the PD set to a kernel owned PD.

When cache entries are created for the first time the PDN is set to 0, which is probably a kernel PD, but be explicit.

When a MR is registered using the hybrid reg_create with UMR xlt & enable the disabled mkey is pointing at the user PD, keep it pointing at the kernel until a UMR enables it and sets the user PD.

Fixes 9ec4483a3f0f ("IB/mlx5: Move MRs to a kernel PD when freeing them to the MR cache")
---
 drivers/infiniband/hw/mlx5/mr.c | 51 +++++++++++++++++----------------
 1 file changed, 26 insertions(+), 25 deletions(-)
drivers/infiniband/hw/mlx5/mr.c +26 -25
index 8f5d36f32529e..6eb40b33e1ea8 100644
@@ -50,6 +50,29 @@ enum {
 static void
 create_mkey_callback(int status, struct mlx5_async_work *context);
 
+static void set_mkc_access_pd_addr_fields(void *mkc, int acc, u64 start_addr,
+					  struct ib_pd *pd)
+{
+	struct mlx5_ib_dev *dev = to_mdev(pd->device);
+
+	MLX5_SET(mkc, mkc, a, !!(acc & IB_ACCESS_REMOTE_ATOMIC));
+	MLX5_SET(mkc, mkc, rw, !!(acc & IB_ACCESS_REMOTE_WRITE));
+	MLX5_SET(mkc, mkc, rr, !!(acc & IB_ACCESS_REMOTE_READ));
+	MLX5_SET(mkc, mkc, lw, !!(acc & IB_ACCESS_LOCAL_WRITE));
+	MLX5_SET(mkc, mkc, lr, 1);
+
+	if (MLX5_CAP_GEN(dev->mdev, relaxed_ordering_write))
+		MLX5_SET(mkc, mkc, relaxed_ordering_write,
+			 !!(acc & IB_ACCESS_RELAXED_ORDERING));
+	if (MLX5_CAP_GEN(dev->mdev, relaxed_ordering_read))
+		MLX5_SET(mkc, mkc, relaxed_ordering_read,
+			 !!(acc & IB_ACCESS_RELAXED_ORDERING));
+
+	MLX5_SET(mkc, mkc, pd, to_mpd(pd)->pdn);
+	MLX5_SET(mkc, mkc, qpn, 0xffffff);
+	MLX5_SET64(mkc, mkc, start_addr, start_addr);
+}
+
 static void
 assign_mkey_variant(struct mlx5_ib_dev *dev, struct mlx5_core_mkey *mkey,
 		    u32 *in)
@@ -152,12 +175,12 @@ static struct mlx5_ib_mr *alloc_cache_mr(struct mlx5_cache_ent *ent, void *mkc)
 	mr->cache_ent = ent;
 	mr->dev = ent->dev;
 
+	set_mkc_access_pd_addr_fields(mkc, 0, 0, ent->dev->umrc.pd);
 	MLX5_SET(mkc, mkc, free, 1);
 	MLX5_SET(mkc, mkc, umr_en, 1);
 	MLX5_SET(mkc, mkc, access_mode_1_0, ent->access_mode & 0x3);
 	MLX5_SET(mkc, mkc, access_mode_4_2, (ent->access_mode >> 2) & 0x7);
 
-	MLX5_SET(mkc, mkc, qpn, 0xffffff);
 	MLX5_SET(mkc, mkc, translations_octword_size, ent->xlt);
 	MLX5_SET(mkc, mkc, log_page_size, ent->page);
 	return mr;
@@ -774,29 +797,6 @@ int mlx5_mr_cache_cleanup(struct mlx5_ib_dev *dev)
 	return 0;
 }
 
-static void set_mkc_access_pd_addr_fields(void *mkc, int acc, u64 start_addr,
-					  struct ib_pd *pd)
-{
-	struct mlx5_ib_dev *dev = to_mdev(pd->device);
-
-	MLX5_SET(mkc, mkc, a, !!(acc & IB_ACCESS_REMOTE_ATOMIC));
-	MLX5_SET(mkc, mkc, rw, !!(acc & IB_ACCESS_REMOTE_WRITE));
-	MLX5_SET(mkc, mkc, rr, !!(acc & IB_ACCESS_REMOTE_READ));
-	MLX5_SET(mkc, mkc, lw, !!(acc & IB_ACCESS_LOCAL_WRITE));
-	MLX5_SET(mkc, mkc, lr, 1);
-
-	if (MLX5_CAP_GEN(dev->mdev, relaxed_ordering_write))
-		MLX5_SET(mkc, mkc, relaxed_ordering_write,
-			 !!(acc & IB_ACCESS_RELAXED_ORDERING));
-	if (MLX5_CAP_GEN(dev->mdev, relaxed_ordering_read))
-		MLX5_SET(mkc, mkc, relaxed_ordering_read,
-			 !!(acc & IB_ACCESS_RELAXED_ORDERING));
-
-	MLX5_SET(mkc, mkc, pd, to_mpd(pd)->pdn);
-	MLX5_SET(mkc, mkc, qpn, 0xffffff);
-	MLX5_SET64(mkc, mkc, start_addr, start_addr);
-}
-
 struct ib_mr *mlx5_ib_get_dma_mr(struct ib_pd *pd, int acc)
 {
 	struct mlx5_ib_dev *dev = to_mdev(pd->device);
@@ -1190,7 +1190,8 @@ static struct mlx5_ib_mr *reg_create(struct ib_mr *ibmr, struct ib_pd *pd,
 	MLX5_SET(create_mkey_in, in, pg_access, !!(pg_cap));
 
 	mkc = MLX5_ADDR_OF(create_mkey_in, in, memory_key_mkey_entry);
-	set_mkc_access_pd_addr_fields(mkc, access_flags, virt_addr, pd);
+	set_mkc_access_pd_addr_fields(mkc, access_flags, virt_addr,
+				      populate ? pd : dev->umrc.pd);
 	MLX5_SET(mkc, mkc, free, !populate);
 	MLX5_SET(mkc, mkc, access_mode_1_0, MLX5_MKC_ACCESS_MODE_MTT);
 	MLX5_SET(mkc, mkc, umr_en, 1);
Signature · 1 line
2.25.1
author maintainer
#462 lore raw

PATCH 462/757 RDMA/mlx5: Disable IB_DEVICE_MEM_MGT_EXTENSIONS if IB_WR_REG_MR cant work

In reply to Greg Kroah-Hartman

From: Jason Gunthorpe <[email protected]>

[ Upstream commit 0ec52f0194638e2d284ad55eba5a7aff753de1b9 ]

set_reg_wr() always fails if !umr_modify_entity_size_disabled because mlx5_ib_can_use_umr() always fails. Without set_reg_wr() IB_WR_REG_MR doesn't work and that means the device should not advertise IB_DEVICE_MEM_MGT_EXTENSIONS.

Fixes 841b07f99a47 ("IB/mlx5: Block MR WR if UMR is not possible")
---
 drivers/infiniband/hw/mlx5/main.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/infiniband/hw/mlx5/main.c +3 -1
index d60d63221b14d..b805cc8124657 100644
@@ -840,7 +840,9 @@ static int mlx5_ib_query_device(struct ib_device *ibdev,
 		/* We support 'Gappy' memory registration too */
 		props->device_cap_flags |= IB_DEVICE_SG_GAPS_REG;
 	}
-	props->device_cap_flags |= IB_DEVICE_MEM_MGT_EXTENSIONS;
+	/* IB_WR_REG_MR always requires changing the entity size with UMR */
+	if (!MLX5_CAP_GEN(dev->mdev, umr_modify_entity_size_disabled))
+		props->device_cap_flags |= IB_DEVICE_MEM_MGT_EXTENSIONS;
 	if (MLX5_CAP_GEN(mdev, sho)) {
 		props->device_cap_flags |= IB_DEVICE_INTEGRITY_HANDOVER;
 		/* At this stage no support for signature handover */
Signature · 1 line
2.25.1
author maintainer
#463 lore raw

PATCH 463/757 i40iw: Add support to make destroy QP synchronous

In reply to Greg Kroah-Hartman

From: Sindhu, Devale <[email protected]>

[ Upstream commit f2334964e969762e266a616acf9377f6046470a2 ]

Occasionally ib_write_bw crash is seen due to access of a pd object in i40iw_sc_qp_destroy after it is freed. Destroy qp is not synchronous in i40iw and thus the iwqp object could be referencing a pd object that is freed by ib core as a result of successful return from i40iw_destroy_qp.

Wait in i40iw_destroy_qp till all QP references are released and destroy the QP and its associated resources before returning. Switch to use the refcount API vs atomic API for lifetime management of the qp.

 RIP: 0010:i40iw_sc_qp_destroy+0x4b/0x120 [i40iw]
 [...]
 RSP: 0018:ffffb4a7042e3ba8 EFLAGS: 00010002
 RAX: 0000000000000000 RBX: 0000000000000001 RCX: dead000000000122
 RDX: ffffb4a7042e3bac RSI: ffff8b7ef9b1e940 RDI: ffff8b7efbf09080
 RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000
 R10: 8080808080808080 R11: 0000000000000010 R12: ffff8b7efbf08050
 R13: 0000000000000001 R14: ffff8b7f15042928 R15: ffff8b7ef9b1e940
 FS:  0000000000000000(0000) GS:ffff8b7f2fa00000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000000000400 CR3: 000000020d60a006 CR4: 00000000001606e0
 Call Trace:
  i40iw_exec_cqp_cmd+0x4d3/0x5c0 [i40iw]
  ? try_to_wake_up+0x1ea/0x5d0
  ? __switch_to_asm+0x40/0x70
  i40iw_process_cqp_cmd+0x95/0xa0 [i40iw]
  i40iw_handle_cqp_op+0x42/0x1a0 [i40iw]
  ? cm_event_handler+0x13c/0x1f0 [iw_cm]
  i40iw_rem_ref+0xa0/0xf0 [i40iw]
  cm_work_handler+0x99c/0xd10 [iw_cm]
  process_one_work+0x1a1/0x360
  worker_thread+0x30/0x380
  ? process_one_work+0x360/0x360
  kthread+0x10c/0x130
  ? kthread_park+0x80/0x80
  ret_from_fork+0x35/0x40
---
 drivers/infiniband/hw/i40iw/i40iw.h       |  9 ++--
 drivers/infiniband/hw/i40iw/i40iw_cm.c    | 10 ++--
 drivers/infiniband/hw/i40iw/i40iw_hw.c    |  4 +-
 drivers/infiniband/hw/i40iw/i40iw_utils.c | 59 ++++-------------------
 drivers/infiniband/hw/i40iw/i40iw_verbs.c | 31 ++++++++----
 drivers/infiniband/hw/i40iw/i40iw_verbs.h |  3 +-
 6 files changed, 45 insertions(+), 71 deletions(-)
drivers/infiniband/hw/i40iw/i40iw.h +4 -5
index 25747b85a79c7..832b80de004fb 100644
@@ -409,8 +409,8 @@ static inline struct i40iw_qp *to_iwqp(struct ib_qp *ibqp)
 }
 
 /* i40iw.c */
-void i40iw_add_ref(struct ib_qp *);
-void i40iw_rem_ref(struct ib_qp *);
+void i40iw_qp_add_ref(struct ib_qp *ibqp);
+void i40iw_qp_rem_ref(struct ib_qp *ibqp);
 struct ib_qp *i40iw_get_qp(struct ib_device *, int);
 
 void i40iw_flush_wqes(struct i40iw_device *iwdev,
@@ -554,9 +554,8 @@ enum i40iw_status_code i40iw_manage_qhash(struct i40iw_device *iwdev,
 					  bool wait);
 void i40iw_receive_ilq(struct i40iw_sc_vsi *vsi, struct i40iw_puda_buf *rbuf);
 void i40iw_free_sqbuf(struct i40iw_sc_vsi *vsi, void *bufp);
-void i40iw_free_qp_resources(struct i40iw_device *iwdev,
-			     struct i40iw_qp *iwqp,
-			     u32 qp_num);
+void i40iw_free_qp_resources(struct i40iw_qp *iwqp);
+
 enum i40iw_status_code i40iw_obj_aligned_mem(struct i40iw_device *iwdev,
 					     struct i40iw_dma_mem *memptr,
 					     u32 size, u32 mask);
drivers/infiniband/hw/i40iw/i40iw_cm.c +5 -5
index a3b95805c154e..3053c345a5a34 100644
@@ -2322,7 +2322,7 @@ static void i40iw_rem_ref_cm_node(struct i40iw_cm_node *cm_node)
 	iwqp = cm_node->iwqp;
 	if (iwqp) {
 		iwqp->cm_node = NULL;
-		i40iw_rem_ref(&iwqp->ibqp);
+		i40iw_qp_rem_ref(&iwqp->ibqp);
 		cm_node->iwqp = NULL;
 	} else if (cm_node->qhash_set) {
 		i40iw_get_addr_info(cm_node, &nfo);
@@ -3452,7 +3452,7 @@ void i40iw_cm_disconn(struct i40iw_qp *iwqp)
 		kfree(work);
 		return;
 	}
-	i40iw_add_ref(&iwqp->ibqp);
+	i40iw_qp_add_ref(&iwqp->ibqp);
 	spin_unlock_irqrestore(&iwdev->qptable_lock, flags);
 
 	work->iwqp = iwqp;
@@ -3623,7 +3623,7 @@ static void i40iw_disconnect_worker(struct work_struct *work)
 
 	kfree(dwork);
 	i40iw_cm_disconn_true(iwqp);
-	i40iw_rem_ref(&iwqp->ibqp);
+	i40iw_qp_rem_ref(&iwqp->ibqp);
 }
 
 /**
@@ -3745,7 +3745,7 @@ int i40iw_accept(struct iw_cm_id *cm_id, struct iw_cm_conn_param *conn_param)
 	cm_node->lsmm_size = accept.size + conn_param->private_data_len;
 	i40iw_cm_init_tsa_conn(iwqp, cm_node);
 	cm_id->add_ref(cm_id);
-	i40iw_add_ref(&iwqp->ibqp);
+	i40iw_qp_add_ref(&iwqp->ibqp);
 
 	attr.qp_state = IB_QPS_RTS;
 	cm_node->qhash_set = false;
@@ -3908,7 +3908,7 @@ int i40iw_connect(struct iw_cm_id *cm_id, struct iw_cm_conn_param *conn_param)
 	iwqp->cm_node = cm_node;
 	cm_node->iwqp = iwqp;
 	iwqp->cm_id = cm_id;
-	i40iw_add_ref(&iwqp->ibqp);
+	i40iw_qp_add_ref(&iwqp->ibqp);
 
 	if (cm_node->state != I40IW_CM_STATE_OFFLOADED) {
 		cm_node->state = I40IW_CM_STATE_SYN_SENT;
drivers/infiniband/hw/i40iw/i40iw_hw.c +2 -2
index e1085634b8d9d..56fdc161f6f8e 100644
@@ -313,7 +313,7 @@ void i40iw_process_aeq(struct i40iw_device *iwdev)
 					    __func__, info->qp_cq_id);
 				continue;
 			}
-			i40iw_add_ref(&iwqp->ibqp);
+			i40iw_qp_add_ref(&iwqp->ibqp);
 			spin_unlock_irqrestore(&iwdev->qptable_lock, flags);
 			qp = &iwqp->sc_qp;
 			spin_lock_irqsave(&iwqp->lock, flags);
@@ -426,7 +426,7 @@ void i40iw_process_aeq(struct i40iw_device *iwdev)
 			break;
 		}
 		if (info->qp)
-			i40iw_rem_ref(&iwqp->ibqp);
+			i40iw_qp_rem_ref(&iwqp->ibqp);
 	} while (1);
 
 	if (aeqcnt)
drivers/infiniband/hw/i40iw/i40iw_utils.c +10 -49

114 lines not on this page · raw message

drivers/infiniband/hw/i40iw/i40iw_verbs.c +22 -9
index 1321e3a36491b..09caad228aa4f 100644
@@ -363,11 +363,11 @@ static struct i40iw_pbl *i40iw_get_pbl(unsigned long va,
  * @iwqp: qp ptr (user or kernel)
  * @qp_num: qp number assigned
  */
-void i40iw_free_qp_resources(struct i40iw_device *iwdev,
-			     struct i40iw_qp *iwqp,
-			     u32 qp_num)
+void i40iw_free_qp_resources(struct i40iw_qp *iwqp)
 {
 	struct i40iw_pbl *iwpbl = &iwqp->iwpbl;
+	struct i40iw_device *iwdev = iwqp->iwdev;
+	u32 qp_num = iwqp->ibqp.qp_num;
 
 	i40iw_ieq_cleanup_qp(iwdev->vsi.ieq, &iwqp->sc_qp);
 	i40iw_dealloc_push_page(iwdev, &iwqp->sc_qp);
@@ -401,6 +401,10 @@ static void i40iw_clean_cqes(struct i40iw_qp *iwqp, struct i40iw_cq *iwcq)
 static int i40iw_destroy_qp(struct ib_qp *ibqp, struct ib_udata *udata)
 {
 	struct i40iw_qp *iwqp = to_iwqp(ibqp);
+	struct ib_qp_attr attr;
+	struct i40iw_device *iwdev = iwqp->iwdev;
+
+	memset(&attr, 0, sizeof(attr));
 
 	iwqp->destroyed = 1;
 
@@ -415,7 +419,15 @@ static int i40iw_destroy_qp(struct ib_qp *ibqp, struct ib_udata *udata)
 		}
 	}
 
-	i40iw_rem_ref(&iwqp->ibqp);
+	attr.qp_state = IB_QPS_ERR;
+	i40iw_modify_qp(&iwqp->ibqp, &attr, IB_QP_STATE, NULL);
+	i40iw_qp_rem_ref(&iwqp->ibqp);
+	wait_for_completion(&iwqp->free_qp);
+	i40iw_cqp_qp_destroy_cmd(&iwdev->sc_dev, &iwqp->sc_qp);
+	i40iw_rem_pdusecount(iwqp->iwpd, iwdev);
+	i40iw_free_qp_resources(iwqp);
+	i40iw_rem_devusecount(iwdev);
+
 	return 0;
 }
 
@@ -576,6 +588,7 @@ static struct ib_qp *i40iw_create_qp(struct ib_pd *ibpd,
 	qp->back_qp = (void *)iwqp;
 	qp->push_idx = I40IW_INVALID_PUSH_PAGE_INDEX;
 
+	iwqp->iwdev = iwdev;
 	iwqp->ctx_info.iwarp_info = &iwqp->iwarp_info;
 
 	if (i40iw_allocate_dma_mem(dev->hw,
@@ -600,7 +613,6 @@ static struct ib_qp *i40iw_create_qp(struct ib_pd *ibpd,
 		goto error;
 	}
 
-	iwqp->iwdev = iwdev;
 	iwqp->iwpd = iwpd;
 	iwqp->ibqp.qp_num = qp_num;
 	qp = &iwqp->sc_qp;
@@ -714,7 +726,7 @@ static struct ib_qp *i40iw_create_qp(struct ib_pd *ibpd,
 		goto error;
 	}
 
-	i40iw_add_ref(&iwqp->ibqp);
+	refcount_set(&iwqp->refcount, 1);
 	spin_lock_init(&iwqp->lock);
 	iwqp->sig_all = (init_attr->sq_sig_type == IB_SIGNAL_ALL_WR) ? 1 : 0;
 	iwdev->qp_table[qp_num] = iwqp;
@@ -736,10 +748,11 @@ static struct ib_qp *i40iw_create_qp(struct ib_pd *ibpd,
 	}
 	init_completion(&iwqp->sq_drained);
 	init_completion(&iwqp->rq_drained);
+	init_completion(&iwqp->free_qp);
 
 	return &iwqp->ibqp;
 error:
-	i40iw_free_qp_resources(iwdev, iwqp, qp_num);
+	i40iw_free_qp_resources(iwqp);
 	return ERR_PTR(err_code);
 }
 
@@ -2637,13 +2650,13 @@ static const struct ib_device_ops i40iw_dev_ops = {
 	.get_hw_stats = i40iw_get_hw_stats,
 	.get_port_immutable = i40iw_port_immutable,
 	.iw_accept = i40iw_accept,
-	.iw_add_ref = i40iw_add_ref,
+	.iw_add_ref = i40iw_qp_add_ref,
 	.iw_connect = i40iw_connect,
 	.iw_create_listen = i40iw_create_listen,
 	.iw_destroy_listen = i40iw_destroy_listen,
 	.iw_get_qp = i40iw_get_qp,
 	.iw_reject = i40iw_reject,
-	.iw_rem_ref = i40iw_rem_ref,
+	.iw_rem_ref = i40iw_qp_rem_ref,
 	.map_mr_sg = i40iw_map_mr_sg,
 	.mmap = i40iw_mmap,
 	.modify_qp = i40iw_modify_qp,
drivers/infiniband/hw/i40iw/i40iw_verbs.h +2 -1
index 331bc21cbcc73..bab71f3e56374 100644
@@ -139,7 +139,7 @@ struct i40iw_qp {
 	struct i40iw_qp_host_ctx_info ctx_info;
 	struct i40iwarp_offload_info iwarp_info;
 	void *allocated_buffer;
-	atomic_t refcount;
+	refcount_t refcount;
 	struct iw_cm_id *cm_id;
 	void *cm_node;
 	struct ib_mr *lsmm_mr;
@@ -174,5 +174,6 @@ struct i40iw_qp {
 	struct i40iw_dma_mem ietf_mem;
 	struct completion sq_drained;
 	struct completion rq_drained;
+	struct completion free_qp;
 };
 #endif
Signature · 1 line
2.25.1
author maintainer
#464 lore raw

PATCH 464/757 perf stat: Skip duration_time in setup_system_wide

In reply to Greg Kroah-Hartman

From: Jin Yao <[email protected]>

[ Upstream commit 002a3d690f95804bdef6b70b26154103518e13d9 ]

Some metrics (such as DRAM_BW_Use) consists of uncore events and duration_time. For uncore events, counter->core.system_wide is true. But for duration_time, counter->core.system_wide is false so target.system_wide is set to false.

Then 'enable_on_exec' is set in perf_event_attr of uncore event. Kernel will return error when trying to open the uncore event.

This patch skips the duration_time in setup_system_wide then target.system_wide will be set to true for the evlist of uncore events + duration_time.

Before (tested on skylake desktop):

  # perf stat -M DRAM_BW_Use -- sleep 1
  Error:
  The sys_perf_event_open() syscall returned with 22 (Invalid argument) for event (arb/event=0x84,umask=0x1/).
  /bin/dmesg | grep -i perf may provide additional information.

After:

  # perf stat -M DRAM_BW_Use -- sleep 1

Performance counter stats for 'system wide':

                169      arb/event=0x84,umask=0x1/ #     0.00 DRAM_BW_Use
             40,427      arb/event=0x81,umask=0x1/
      1,000,902,197 ns   duration_time
        1.000902197 seconds time elapsed
Fixes e3ba76deef23064f ("perf tools: Force uncore events to system wide monitoring")
Cc Alexander Shishkin <[email protected]>
Cc Andi Kleen <[email protected]>
Cc Jin Yao <[email protected]>
Cc Jiri Olsa <[email protected]>
Cc Kan Liang <[email protected]>
Cc Peter Zijlstra <[email protected]>
---
 tools/perf/builtin-stat.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
tools/perf/builtin-stat.c +3 -1
index fddc97cac9841..eef64b1411a4a 100644
@@ -2063,8 +2063,10 @@ static void setup_system_wide(int forks)
 		struct evsel *counter;
 
 		evlist__for_each_entry(evsel_list, counter) {
-			if (!counter->core.system_wide)
+			if (!counter->core.system_wide &&
+			    strcmp(counter->name, "duration_time")) {
 				return;
+			}
 		}
 
 		if (evsel_list->core.nr_entries)
Signature · 1 line
2.25.1
author maintainer
#465 lore raw

PATCH 465/757 RDMA/hns: Add check for the validity of sl configuration

In reply to Greg Kroah-Hartman

From: Jiaran Zhang <[email protected]>

[ Upstream commit 172505cfa3a8ee98acaa569fd3be97697b333958 ]

According to the RoCE v1 specification, the sl (service level) 0-7 are mapped directly to priorities 0-7 respectively, sl 8-15 are reserved. The driver should verify whether the the value of sl is larger than 7, if so, an exception should be returned.

Fixes 926a01dc000d ("RDMA/hns: Add QP operations support for hip08 SoC")
---
 drivers/infiniband/hw/hns/hns_roce_hw_v2.c | 12 ++++++++++--
 drivers/infiniband/hw/hns/hns_roce_hw_v2.h |  2 ++
 2 files changed, 12 insertions(+), 2 deletions(-)
drivers/infiniband/hw/hns/hns_roce_hw_v2.c +10 -2
index 4cda95ed1fbe2..59087d5811ba3 100644
@@ -4259,11 +4259,19 @@ static int hns_roce_v2_set_path(struct ib_qp *ibqp,
 		       V2_QPC_BYTE_28_FL_S, 0);
 	memcpy(context->dgid, grh->dgid.raw, sizeof(grh->dgid.raw));
 	memset(qpc_mask->dgid, 0, sizeof(grh->dgid.raw));
+
+	hr_qp->sl = rdma_ah_get_sl(&attr->ah_attr);
+	if (unlikely(hr_qp->sl > MAX_SERVICE_LEVEL)) {
+		ibdev_err(ibdev,
+			  "failed to fill QPC, sl (%d) shouldn't be larger than %d.\n",
+			  hr_qp->sl, MAX_SERVICE_LEVEL);
+		return -EINVAL;
+	}
+
 	roce_set_field(context->byte_28_at_fl, V2_QPC_BYTE_28_SL_M,
-		       V2_QPC_BYTE_28_SL_S, rdma_ah_get_sl(&attr->ah_attr));
+		       V2_QPC_BYTE_28_SL_S, hr_qp->sl);
 	roce_set_field(qpc_mask->byte_28_at_fl, V2_QPC_BYTE_28_SL_M,
 		       V2_QPC_BYTE_28_SL_S, 0);
-	hr_qp->sl = rdma_ah_get_sl(&attr->ah_attr);
 
 	return 0;
 }
drivers/infiniband/hw/hns/hns_roce_hw_v2.h +2 -0
index ac29be43b6bd5..17f35f91f4ad2 100644
@@ -1941,6 +1941,8 @@ struct hns_roce_eq_context {
 #define HNS_ROCE_V2_AEQE_EVENT_QUEUE_NUM_S 0
 #define HNS_ROCE_V2_AEQE_EVENT_QUEUE_NUM_M GENMASK(23, 0)
 
+#define MAX_SERVICE_LEVEL 0x7
+
 struct hns_roce_wqe_atomic_seg {
 	__le64          fetchadd_swap_data;
 	__le64          cmp_data;
Signature · 1 line
2.25.1
author maintainer
#466 lore raw

PATCH 466/757 RDMA/hns: Solve the overflow of the calc_pg_sz()

In reply to Greg Kroah-Hartman

From: Jiaran Zhang <[email protected]>

[ Upstream commit 768202a0825d447de785e87ff1ea1d3c86a71727 ]

calc_pg_sz() may gets a data calculation overflow if the PAGE_SIZE is 64 KB and hop_num is 2. It is because that all variables involved in calculation are defined in type of int. So change the type of bt_chunk_size, buf_chunk_size and obj_per_chunk_default to u64.

Fixes ba6bb7e97421 ("RDMA/hns: Add interfaces to get pf capabilities from firmware")
---
 drivers/infiniband/hw/hns/hns_roce_hw_v2.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/infiniband/hw/hns/hns_roce_hw_v2.c +3 -3
index 59087d5811ba3..547f8c7dcf561 100644
@@ -1770,9 +1770,9 @@ static void calc_pg_sz(int obj_num, int obj_size, int hop_num, int ctx_bt_num,
 		       int *buf_page_size, int *bt_page_size, u32 hem_type)
 {
 	u64 obj_per_chunk;
-	int bt_chunk_size = 1 << PAGE_SHIFT;
-	int buf_chunk_size = 1 << PAGE_SHIFT;
-	int obj_per_chunk_default = buf_chunk_size / obj_size;
+	u64 bt_chunk_size = PAGE_SIZE;
+	u64 buf_chunk_size = PAGE_SIZE;
+	u64 obj_per_chunk_default = buf_chunk_size / obj_size;
 
 	*buf_page_size = 0;
 	*bt_page_size = 0;
Signature · 1 line
2.25.1
author maintainer
#467 lore raw

PATCH 467/757 RDMA/hns: Fix the wrong value of rnr_retry when querying qp

In reply to Greg Kroah-Hartman

From: Wenpeng Liang <[email protected]>

[ Upstream commit 99fcf82521d91468ee6115a3c253aa032dc63cbc ]

The rnr_retry returned to the user is not correct, it should be got from another fields in QPC.

Fixes bfe860351e31 ("RDMA/hns: Fix cast from or to restricted __le32 for driver")
---
 drivers/infiniband/hw/hns/hns_roce_hw_v2.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/infiniband/hw/hns/hns_roce_hw_v2.c +3 -1
index 547f8c7dcf561..9eaed58fbaee0 100644
@@ -4767,7 +4767,9 @@ static int hns_roce_v2_query_qp(struct ib_qp *ibqp, struct ib_qp_attr *qp_attr,
 	qp_attr->retry_cnt = roce_get_field(context.byte_212_lsn,
 					    V2_QPC_BYTE_212_RETRY_CNT_M,
 					    V2_QPC_BYTE_212_RETRY_CNT_S);
-	qp_attr->rnr_retry = le32_to_cpu(context.rq_rnr_timer);
+	qp_attr->rnr_retry = roce_get_field(context.byte_244_rnr_rxack,
+					    V2_QPC_BYTE_244_RNR_CNT_M,
+					    V2_QPC_BYTE_244_RNR_CNT_S);
 
 done:
 	qp_attr->cur_qp_state = qp_attr->qp_state;
Signature · 1 line
2.25.1
author maintainer
#468 lore raw

PATCH 468/757 RDMA/hns: Fix configuration of ack_req_freq in QPC

In reply to Greg Kroah-Hartman

From: Weihang Li <[email protected]>

[ Upstream commit fbed9d2be292504e04caa2057e3a9477a1e1d040 ]

The hardware will add AckReq flag in BTH header according to the value of ack_req_freq to request ACK from responder for the packets with this flag. It should be greater than or equal to lp_pktn_ini instead of using a fixed value.

Fixes 7b9bd73ed13d ("RDMA/hns: Fix wrong assignment of lp_pktn_ini in QPC")
---
 drivers/infiniband/hw/hns/hns_roce_hw_v2.c | 18 ++++++++++++------
 1 file changed, 12 insertions(+), 6 deletions(-)
drivers/infiniband/hw/hns/hns_roce_hw_v2.c +12 -6
index 9eaed58fbaee0..f72ee3b5d05f6 100644
@@ -3641,9 +3641,6 @@ static void modify_qp_reset_to_init(struct ib_qp *ibqp,
 			     V2_QPC_BYTE_76_SRQ_EN_S, 1);
 	}
 
-	roce_set_field(context->byte_172_sq_psn, V2_QPC_BYTE_172_ACK_REQ_FREQ_M,
-		       V2_QPC_BYTE_172_ACK_REQ_FREQ_S, 4);
-
 	roce_set_bit(context->byte_172_sq_psn, V2_QPC_BYTE_172_FRE_S, 1);
 
 	hr_qp->access_flags = attr->qp_access_flags;
@@ -3954,6 +3951,7 @@ static int modify_qp_init_to_rtr(struct ib_qp *ibqp,
 	dma_addr_t trrl_ba;
 	dma_addr_t irrl_ba;
 	enum ib_mtu mtu;
+	u8 lp_pktn_ini;
 	u8 port_num;
 	u64 *mtts;
 	u8 *dmac;
@@ -4061,13 +4059,21 @@ static int modify_qp_init_to_rtr(struct ib_qp *ibqp,
 	}
 
 #define MAX_LP_MSG_LEN 65536
-	/* MTU*(2^LP_PKTN_INI) shouldn't be bigger than 64kb */
+	/* MTU * (2 ^ LP_PKTN_INI) shouldn't be bigger than 64KB */
+	lp_pktn_ini = ilog2(MAX_LP_MSG_LEN / ib_mtu_enum_to_int(mtu));
+
 	roce_set_field(context->byte_56_dqpn_err, V2_QPC_BYTE_56_LP_PKTN_INI_M,
-		       V2_QPC_BYTE_56_LP_PKTN_INI_S,
-		       ilog2(MAX_LP_MSG_LEN / ib_mtu_enum_to_int(mtu)));
+		       V2_QPC_BYTE_56_LP_PKTN_INI_S, lp_pktn_ini);
 	roce_set_field(qpc_mask->byte_56_dqpn_err, V2_QPC_BYTE_56_LP_PKTN_INI_M,
 		       V2_QPC_BYTE_56_LP_PKTN_INI_S, 0);
 
+	/* ACK_REQ_FREQ should be larger than or equal to LP_PKTN_INI */
+	roce_set_field(context->byte_172_sq_psn, V2_QPC_BYTE_172_ACK_REQ_FREQ_M,
+		       V2_QPC_BYTE_172_ACK_REQ_FREQ_S, lp_pktn_ini);
+	roce_set_field(qpc_mask->byte_172_sq_psn,
+		       V2_QPC_BYTE_172_ACK_REQ_FREQ_M,
+		       V2_QPC_BYTE_172_ACK_REQ_FREQ_S, 0);
+
 	roce_set_bit(qpc_mask->byte_108_rx_reqepsn,
 		     V2_QPC_BYTE_108_RX_REQ_PSN_ERR_S, 0);
 	roce_set_field(qpc_mask->byte_96_rx_reqmsn, V2_QPC_BYTE_96_RX_REQ_MSN_M,
Signature · 1 line
2.25.1
author maintainer
#469 lore raw

PATCH 469/757 RDMA/hns: Fix missing sq_sig_type when querying QP

In reply to Greg Kroah-Hartman

From: Weihang Li <[email protected]>

[ Upstream commit 05df49279f8926178ecb3ce88e61b63104cd6293 ]

The sq_sig_type field should be filled when querying QP, or the users may get a wrong value.

Fixes 926a01dc000d ("RDMA/hns: Add QP operations support for hip08 SoC")
---
 drivers/infiniband/hw/hns/hns_roce_hw_v2.c | 1 +
 1 file changed, 1 insertion(+)
drivers/infiniband/hw/hns/hns_roce_hw_v2.c +1 -0
index f72ee3b5d05f6..cee140920c579 100644
@@ -4791,6 +4791,7 @@ static int hns_roce_v2_query_qp(struct ib_qp *ibqp, struct ib_qp_attr *qp_attr,
 	}
 
 	qp_init_attr->cap = qp_attr->cap;
+	qp_init_attr->sq_sig_type = hr_qp->sq_signal_bits;
 
 out:
 	mutex_unlock(&hr_qp->mutex);
Signature · 1 line
2.25.1
author maintainer
#470 lore raw

PATCH 470/757 RDMA/mlx5: Fix type warning of sizeof in __mlx5_ib_alloc_counters()

In reply to Greg Kroah-Hartman

From: Liu Shixin <[email protected]>

[ Upstream commit b942fc0319a72b83146b79619eb578e989062911 ]

sizeof() when applied to a pointer typed expression should give the size of the pointed data, even if the data is a pointer.

---
 drivers/infiniband/hw/mlx5/counters.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/infiniband/hw/mlx5/counters.c +2 -2
index 145f3cb40ccba..aeeb14ecb3ee7 100644
@@ -456,12 +456,12 @@ static int __mlx5_ib_alloc_counters(struct mlx5_ib_dev *dev,
 		cnts->num_ext_ppcnt_counters = ARRAY_SIZE(ext_ppcnt_cnts);
 		num_counters += ARRAY_SIZE(ext_ppcnt_cnts);
 	}
-	cnts->names = kcalloc(num_counters, sizeof(cnts->names), GFP_KERNEL);
+	cnts->names = kcalloc(num_counters, sizeof(*cnts->names), GFP_KERNEL);
 	if (!cnts->names)
 		return -ENOMEM;
 
 	cnts->offsets = kcalloc(num_counters,
-				sizeof(cnts->offsets), GFP_KERNEL);
+				sizeof(*cnts->offsets), GFP_KERNEL);
 	if (!cnts->offsets)
 		goto err_names;
 
Signature · 1 line
2.25.1
author maintainer
#471 lore raw

PATCH 471/757 mtd: hyperbus: hbmc-am654: Fix direct mapping setup flash access

In reply to Greg Kroah-Hartman

From: Vignesh Raghavendra <[email protected]>

[ Upstream commit aca31ce96814c84d1a41aaa109c15abe61005af7 ]

Setting up of direct mapping should be done with flash node's IO address space and not with controller's IO region.

Fixes b6fe8bc67d2d3 ("mtd: hyperbus: move direct mapping setup to AM654 HBMC driver")
---
 drivers/mtd/hyperbus/hbmc-am654.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/mtd/hyperbus/hbmc-am654.c +2 -2
index e0e33f6bf513b..1e70ecfffa39f 100644
@@ -70,7 +70,8 @@ static int am654_hbmc_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, priv);
 
-	ret = of_address_to_resource(np, 0, &res);
+	priv->hbdev.np = of_get_next_child(np, NULL);
+	ret = of_address_to_resource(priv->hbdev.np, 0, &res);
 	if (ret)
 		return ret;
 
@@ -103,7 +104,6 @@ static int am654_hbmc_probe(struct platform_device *pdev)
 	priv->ctlr.dev = dev;
 	priv->ctlr.ops = &am654_hbmc_ops;
 	priv->hbdev.ctlr = &priv->ctlr;
-	priv->hbdev.np = of_get_next_child(dev->of_node, NULL);
 	ret = hyperbus_register_device(&priv->hbdev);
 	if (ret) {
 		dev_err(dev, "failed to register controller\n");
Signature · 1 line
2.25.1
author maintainer
#472 lore raw

PATCH 472/757 mtd: rawnand: stm32_fmc2: fix a buffer overflow

In reply to Greg Kroah-Hartman

From: Christophe Kerello <[email protected]>

[ Upstream commit ab16f54ef3cdb6bbc06a36f636a89e6db8a6cea3 ]

This patch solves following static checker warning:
drivers/mtd/nand/raw/stm32_fmc2_nand.c:350 stm32_fmc2_nfc_select_chip()
error: buffer overflow 'nfc->data_phys_addr' 2 <= 2

The CS value can only be 0 or 1.

Fixes 2cd457f328c1 ("mtd: rawnand: stm32_fmc2: add STM32 FMC2 NAND flash controller driver")
---
 drivers/mtd/nand/raw/stm32_fmc2_nand.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/mtd/nand/raw/stm32_fmc2_nand.c +1 -1
index 7f4546ae91303..5792fb240cb2b 100644
@@ -1762,7 +1762,7 @@ static int stm32_fmc2_nfc_parse_child(struct stm32_fmc2_nfc *nfc,
 			return ret;
 		}
 
-		if (cs > FMC2_MAX_CE) {
+		if (cs >= FMC2_MAX_CE) {
 			dev_err(nfc->dev, "invalid reg value: %d\n", cs);
 			return -EINVAL;
 		}
Signature · 1 line
2.25.1
author maintainer
#473 lore raw

PATCH 473/757 mtd: rawnand: vf610: disable clk on error handling path in probe

In reply to Greg Kroah-Hartman

From: Evgeny Novikov <[email protected]>

[ Upstream commit cb7dc3178a9862614b1e7567d77f4679f027a074 ]

vf610_nfc_probe() does not invoke clk_disable_unprepare() on one error handling path. The patch fixes that.

Found by Linux Driver Verification project (linuxtesting.org).

Fixes 6f0ce4dfc5a3 ("mtd: rawnand: vf610: Avoid a potential NULL pointer dereference")
---
 drivers/mtd/nand/raw/vf610_nfc.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
drivers/mtd/nand/raw/vf610_nfc.c +4 -2
index 7248c59011836..fcca45e2abe20 100644
@@ -852,8 +852,10 @@ static int vf610_nfc_probe(struct platform_device *pdev)
 	}
 
 	of_id = of_match_device(vf610_nfc_dt_ids, &pdev->dev);
-	if (!of_id)
-		return -ENODEV;
+	if (!of_id) {
+		err = -ENODEV;
+		goto err_disable_clk;
+	}
 
 	nfc->variant = (enum vf610_nfc_variant)of_id->data;
 
Signature · 1 line
2.25.1
author maintainer
#474 lore raw

PATCH 474/757 mtd: spinand: gigadevice: Only one dummy byte in QUADIO

In reply to Greg Kroah-Hartman

From: Hauke Mehrtens <[email protected]>

[ Upstream commit 6387ad9caf8f09747a8569e5876086b72ee9382c ]

The datasheet only lists one dummy byte in the 0xEH operation for the following chips:
* GD5F1GQ4xExxG
* GD5F1GQ4xFxxG
* GD5F1GQ4UAYIG
* GD5F4GQ4UAYIG

Fixes c93c613214ac ("mtd: spinand: add support for GigaDevice GD5FxGQ4xA")
---
 drivers/mtd/nand/spi/gigadevice.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/mtd/nand/spi/gigadevice.c +2 -2
index d219c970042a2..679d3c43e15aa 100644
@@ -21,7 +21,7 @@
 #define GD5FXGQ4UXFXXG_STATUS_ECC_UNCOR_ERROR	(7 << 4)
 
 static SPINAND_OP_VARIANTS(read_cache_variants,
-		SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(0, 2, NULL, 0),
+		SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(0, 1, NULL, 0),
 		SPINAND_PAGE_READ_FROM_CACHE_X4_OP(0, 1, NULL, 0),
 		SPINAND_PAGE_READ_FROM_CACHE_DUALIO_OP(0, 1, NULL, 0),
 		SPINAND_PAGE_READ_FROM_CACHE_X2_OP(0, 1, NULL, 0),
@@ -29,7 +29,7 @@ static SPINAND_OP_VARIANTS(read_cache_variants,
 		SPINAND_PAGE_READ_FROM_CACHE_OP(false, 0, 1, NULL, 0));
 
 static SPINAND_OP_VARIANTS(read_cache_variants_f,
-		SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(0, 2, NULL, 0),
+		SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(0, 1, NULL, 0),
 		SPINAND_PAGE_READ_FROM_CACHE_X4_OP_3A(0, 1, NULL, 0),
 		SPINAND_PAGE_READ_FROM_CACHE_DUALIO_OP(0, 1, NULL, 0),
 		SPINAND_PAGE_READ_FROM_CACHE_X2_OP_3A(0, 1, NULL, 0),
Signature · 1 line
2.25.1
author maintainer
#475 lore raw

PATCH 475/757 mtd: spinand: gigadevice: Add QE Bit

In reply to Greg Kroah-Hartman

From: Hauke Mehrtens <[email protected]>

[ Upstream commit aea7687e77bebce5b67fab9d03347bd8df7933c7 ]

The following GigaDevice chips have the QE BIT in the feature flags, I checked the datasheets, but did not try this.
* GD5F1GQ4xExxG
* GD5F1GQ4xFxxG
* GD5F1GQ4UAYIG
* GD5F4GQ4UAYIG

The Quad operations like 0xEB mention that the QE bit has to be set.

Fixes c93c613214ac ("mtd: spinand: add support for GigaDevice GD5FxGQ4xA")
---
 drivers/mtd/nand/spi/gigadevice.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)
drivers/mtd/nand/spi/gigadevice.c +5 -5
index 679d3c43e15aa..0b7667e60780f 100644
@@ -202,7 +202,7 @@ static const struct spinand_info gigadevice_spinand_table[] = {
 		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
 					      &write_cache_variants,
 					      &update_cache_variants),
-		     0,
+		     SPINAND_HAS_QE_BIT,
 		     SPINAND_ECCINFO(&gd5fxgq4xa_ooblayout,
 				     gd5fxgq4xa_ecc_get_status)),
 	SPINAND_INFO("GD5F2GQ4xA",
@@ -212,7 +212,7 @@ static const struct spinand_info gigadevice_spinand_table[] = {
 		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
 					      &write_cache_variants,
 					      &update_cache_variants),
-		     0,
+		     SPINAND_HAS_QE_BIT,
 		     SPINAND_ECCINFO(&gd5fxgq4xa_ooblayout,
 				     gd5fxgq4xa_ecc_get_status)),
 	SPINAND_INFO("GD5F4GQ4xA",
@@ -222,7 +222,7 @@ static const struct spinand_info gigadevice_spinand_table[] = {
 		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
 					      &write_cache_variants,
 					      &update_cache_variants),
-		     0,
+		     SPINAND_HAS_QE_BIT,
 		     SPINAND_ECCINFO(&gd5fxgq4xa_ooblayout,
 				     gd5fxgq4xa_ecc_get_status)),
 	SPINAND_INFO("GD5F1GQ4UExxG",
@@ -232,7 +232,7 @@ static const struct spinand_info gigadevice_spinand_table[] = {
 		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
 					      &write_cache_variants,
 					      &update_cache_variants),
-		     0,
+		     SPINAND_HAS_QE_BIT,
 		     SPINAND_ECCINFO(&gd5fxgq4_variant2_ooblayout,
 				     gd5fxgq4uexxg_ecc_get_status)),
 	SPINAND_INFO("GD5F1GQ4UFxxG",
@@ -242,7 +242,7 @@ static const struct spinand_info gigadevice_spinand_table[] = {
 		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants_f,
 					      &write_cache_variants,
 					      &update_cache_variants),
-		     0,
+		     SPINAND_HAS_QE_BIT,
 		     SPINAND_ECCINFO(&gd5fxgq4_variant2_ooblayout,
 				     gd5fxgq4ufxxg_ecc_get_status)),
 };
Signature · 1 line
2.25.1
author maintainer
#476 lore raw

PATCH 476/757 mtd: rawnand: ams-delta: Fix non-OF build warning

In reply to Greg Kroah-Hartman

From: Janusz Krzysztofik <[email protected]>

[ Upstream commit 6d11178762f7c8338a028b428198383b8978b280 ]

Commit 7c2f66a960fc ("mtd: rawnand: ams-delta: Add module device tables") introduced an OF module device table but wrapped a reference to it with of_match_ptr() which resolves to NULL in non-OF configs. That resulted in a clang compiler warning on unused variable in non-OF builds. Fix it.

drivers/mtd/nand/raw/ams-delta.c:373:34: warning: unused variable 'gpio_nand_of_id_table' [-Wunused-const-variable]

   static const struct of_device_id gpio_nand_of_id_table[] = {
                                    ^

1 warning generated.

---
 drivers/mtd/nand/raw/ams-delta.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/mtd/nand/raw/ams-delta.c +2 -0
index fdba155416d25..0bf4cfc251472 100644
@@ -400,12 +400,14 @@ static int gpio_nand_remove(struct platform_device *pdev)
 	return 0;
 }
 
+#ifdef CONFIG_OF
 static const struct of_device_id gpio_nand_of_id_table[] = {
 	{
 		/* sentinel */
 	},
 };
 MODULE_DEVICE_TABLE(of, gpio_nand_of_id_table);
+#endif
 
 static const struct platform_device_id gpio_nand_plat_id_table[] = {
 	{
Signature · 1 line
2.25.1
author maintainer
#477 lore raw

PATCH 477/757 kdb: Fix pager search for multi-line strings

In reply to Greg Kroah-Hartman

From: Daniel Thompson <[email protected]>

[ Upstream commit d081a6e353168f15e63eb9e9334757f20343319f ]

Currently using forward search doesn't handle multi-line strings correctly. The search routine replaces line breaks with \0 during the search and, for regular searches ("help | grep Common\n"), there is code after the line has been discarded or printed to replace the break character.

However during a pager search ("help\n" followed by "/Common\n") when the string is matched we will immediately return to normal output and the code that should restore the \n becomes unreachable. Fix this by restoring the replaced character when we disable the search mode and update the comment accordingly.

Fixes fb6daa7520f9d ("kdb: Provide forward search at more prompt")
---
 kernel/debug/kdb/kdb_io.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)
kernel/debug/kdb/kdb_io.c +6 -2
index 9d847ab851dbe..e240c97086e20 100644
@@ -706,12 +706,16 @@ int vkdb_printf(enum kdb_msgsrc src, const char *fmt, va_list ap)
 			size_avail = sizeof(kdb_buffer) - len;
 			goto kdb_print_out;
 		}
-		if (kdb_grepping_flag >= KDB_GREPPING_FLAG_SEARCH)
+		if (kdb_grepping_flag >= KDB_GREPPING_FLAG_SEARCH) {
 			/*
 			 * This was a interactive search (using '/' at more
-			 * prompt) and it has completed. Clear the flag.
+			 * prompt) and it has completed. Replace the \0 with
+			 * its original value to ensure multi-line strings
+			 * are handled properly, and return to normal mode.
 			 */
+			*cphold = replaced_byte;
 			kdb_grepping_flag = 0;
+		}
 		/*
 		 * at this point the string is a full line and
 		 * should be printed, up to the null.
Signature · 1 line
2.25.1
author maintainer
#478 lore raw

PATCH 478/757 overflow: Include header file with SIZE_MAX declaration

In reply to Greg Kroah-Hartman

From: Leon Romanovsky <[email protected]>

[ Upstream commit a4947e84f23474803b62a2759b5808147e4e15f9 ]

The various array_size functions use SIZE_MAX define, but missed limits.h causes to failure to compile code that needs overflow.h.

In file included from drivers/infiniband/core/uverbs_std_types_device.c:6:
./include/linux/overflow.h: In function 'array_size':
./include/linux/overflow.h:258:10: error: 'SIZE_MAX' undeclared (first use in this function)

   258 |   return SIZE_MAX;
       |          ^~~~~~~~
Fixes 610b15c50e86 ("overflow.h: Add allocation size calculation helpers")
---
 include/linux/overflow.h | 1 +
 1 file changed, 1 insertion(+)
include/linux/overflow.h +1 -0
index 93fcef105061b..ff3c48f0abc5b 100644
@@ -3,6 +3,7 @@
 #define __LINUX_OVERFLOW_H
 
 #include <linux/compiler.h>
+#include <linux/limits.h>
 
 /*
  * In the fallback code below, we need to compute the minimum and
Signature · 1 line
2.25.1
author maintainer
#479 lore raw

PATCH 479/757 mtd: parsers: bcm63xx: Do not make it modular

In reply to Greg Kroah-Hartman

From: Florian Fainelli <[email protected]>

[ Upstream commit b597cc75f7fe76708bc6ab3f0e09bbff6f09ae4a ]

With commit 91e81150d388 ("mtd: parsers: bcm63xx: simplify CFE detection"), we generate a reference to fw_arg3 which is the fourth firmware/command line argument on MIPS platforms. That symbol is not exported and would cause a linking failure.

The parser is typically necessary to boot a BCM63xx-based system anyway so having it be part of the kernel image makes sense, therefore make it 'bool' instead of 'tristate'.

Fixes 91e81150d388 ("mtd: parsers: bcm63xx: simplify CFE detection")
---
 drivers/mtd/parsers/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/mtd/parsers/Kconfig +1 -1
index f98363c9b3630..e72354322f628 100644
@@ -12,7 +12,7 @@ config MTD_BCM47XX_PARTS
 	  boards.
 
 config MTD_BCM63XX_PARTS
-	tristate "BCM63XX CFE partitioning parser"
+	bool "BCM63XX CFE partitioning parser"
 	depends on BCM63XX || BMIPS_GENERIC || COMPILE_TEST
 	select CRC32
 	select MTD_PARSER_IMAGETAG
Signature · 1 line
2.25.1
author maintainer
#480 lore raw

PATCH 480/757 RDMA/ipoib: Set rtnl_link_ops for ipoib interfaces

In reply to Greg Kroah-Hartman

From: Kamal Heib <[email protected]>

[ Upstream commit 5ce2dced8e95e76ff7439863a118a053a7fc6f91 ]

Report the "ipoib pkey", "mode" and "umcast" netlink attributes for every IPoiB interface type, not just children created with 'ip link add'.

After setting the rtnl_link_ops for the parent interface, implement the dellink() callback to block users from trying to remove it.

Fixes 862096a8bbf8 ("IB/ipoib: Add more rtnl_link_ops callbacks")
---
 drivers/infiniband/ulp/ipoib/ipoib_main.c    |  2 ++
 drivers/infiniband/ulp/ipoib/ipoib_netlink.c | 11 +++++++++++
 drivers/infiniband/ulp/ipoib/ipoib_vlan.c    |  2 ++
 3 files changed, 15 insertions(+)
drivers/infiniband/ulp/ipoib/ipoib_main.c +2 -0
index f772fe8c5b663..abfab89423f41 100644
@@ -2480,6 +2480,8 @@ static struct net_device *ipoib_add_port(const char *format,
 	/* call event handler to ensure pkey in sync */
 	queue_work(ipoib_workqueue, &priv->flush_heavy);
 
+	ndev->rtnl_link_ops = ipoib_get_link_ops();
+
 	result = register_netdev(ndev);
 	if (result) {
 		pr_warn("%s: couldn't register ipoib port %d; error %d\n",
drivers/infiniband/ulp/ipoib/ipoib_netlink.c +11 -0
index 38c984d16996d..d5a90a66b45cf 100644
@@ -144,6 +144,16 @@ static int ipoib_new_child_link(struct net *src_net, struct net_device *dev,
 	return 0;
 }
 
+static void ipoib_del_child_link(struct net_device *dev, struct list_head *head)
+{
+	struct ipoib_dev_priv *priv = ipoib_priv(dev);
+
+	if (!priv->parent)
+		return;
+
+	unregister_netdevice_queue(dev, head);
+}
+
 static size_t ipoib_get_size(const struct net_device *dev)
 {
 	return nla_total_size(2) +	/* IFLA_IPOIB_PKEY   */
@@ -158,6 +168,7 @@ static struct rtnl_link_ops ipoib_link_ops __read_mostly = {
 	.priv_size	= sizeof(struct ipoib_dev_priv),
 	.setup		= ipoib_setup_common,
 	.newlink	= ipoib_new_child_link,
+	.dellink	= ipoib_del_child_link,
 	.changelink	= ipoib_changelink,
 	.get_size	= ipoib_get_size,
 	.fill_info	= ipoib_fill_info,
drivers/infiniband/ulp/ipoib/ipoib_vlan.c +2 -0
index 30865605e0980..4c50a87ed7cc2 100644
@@ -195,6 +195,8 @@ int ipoib_vlan_add(struct net_device *pdev, unsigned short pkey)
 	}
 	priv = ipoib_priv(ndev);
 
+	ndev->rtnl_link_ops = ipoib_get_link_ops();
+
 	result = __ipoib_vlan_add(ppriv, priv, pkey, IPOIB_LEGACY_CHILD);
 
 	if (result && ndev->reg_state == NETREG_UNINITIALIZED)
Signature · 1 line
2.25.1
author maintainer
#481 lore raw

PATCH 481/757 powerpc/64: fix irq replay missing preempt

In reply to Greg Kroah-Hartman

From: Nicholas Piggin <[email protected]>

[ Upstream commit 903fd31d3212ab72d564c68f6cfb5d04db68773e ]

Prior to commit 3282a3da25bd ("powerpc/64: Implement soft interrupt replay in C"), replayed interrupts returned by the regular interrupt exit code, which performs preemption in case an interrupt had set need_resched.

This logic was missed by the conversion. Adding preempt_disable/enable around the interrupt replay and final irq enable will reschedule if needed.

Fixes 3282a3da25bd ("powerpc/64: Implement soft interrupt replay in C")
---
 arch/powerpc/kernel/irq.c | 7 +++++++
 1 file changed, 7 insertions(+)
arch/powerpc/kernel/irq.c +7 -0
index bf21ebd361900..77019699606a5 100644
@@ -368,6 +368,12 @@ notrace void arch_local_irq_restore(unsigned long mask)
 		}
 	}
 
+	/*
+	 * Disable preempt here, so that the below preempt_enable will
+	 * perform resched if required (a replayed interrupt may set
+	 * need_resched).
+	 */
+	preempt_disable();
 	irq_soft_mask_set(IRQS_ALL_DISABLED);
 	trace_hardirqs_off();
 
@@ -377,6 +383,7 @@ notrace void arch_local_irq_restore(unsigned long mask)
 	trace_hardirqs_on();
 	irq_soft_mask_set(IRQS_ENABLED);
 	__hard_irq_enable();
+	preempt_enable();
 }
 EXPORT_SYMBOL(arch_local_irq_restore);
 
Signature · 1 line
2.25.1
author maintainer
#482 lore raw

PATCH 482/757 powerpc/64: fix irq replay pt_regs->softe value

In reply to Greg Kroah-Hartman

From: Nicholas Piggin <[email protected]>

[ Upstream commit 2b48e96be2f9f7151197fd25dc41487054bc6f5b ]

Replayed interrupts get an "artificial" struct pt_regs constructed to pass to interrupt handler functions. This did not get the softe field set correctly, it's as though the interrupt has hit while irqs are disabled. It should be IRQS_ENABLED.

This is possibly harmless, asynchronous handlers should not be testing if irqs were disabled, but it might be possible for example some code is shared with synchronous or NMI handlers, and it makes more sense if debug output looks at this.

Fixes 3282a3da25bd ("powerpc/64: Implement soft interrupt replay in C")
---
 arch/powerpc/kernel/irq.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/powerpc/kernel/irq.c +1 -1
index 77019699606a5..3fdad93368858 100644
@@ -214,7 +214,7 @@ void replay_soft_interrupts(void)
 	struct pt_regs regs;
 
 	ppc_save_regs(&regs);
-	regs.softe = IRQS_ALL_DISABLED;
+	regs.softe = IRQS_ENABLED;
 
 again:
 	if (IS_ENABLED(CONFIG_PPC_IRQ_SOFT_MASK_DEBUG))
Signature · 1 line
2.25.1
author maintainer
#483 lore raw

PATCH 483/757 powerpc: PPC_SECURE_BOOT should not require PowerNV

In reply to Greg Kroah-Hartman

From: Daniel Axtens <[email protected]>

[ Upstream commit 5c5e46dad939b2bf4df04293ab9ac68abd7c1f55 ]

In commit 61f879d97ce4 ("powerpc/pseries: Detect secure and trusted boot state of the system.") we taught the kernel how to understand the secure-boot parameters used by a pseries guest.

However, CONFIG_PPC_SECURE_BOOT still requires PowerNV. I didn't catch this because pseries_le_defconfig includes support for PowerNV and so everything still worked. Indeed, most configs will. Nonetheless, technically PPC_SECURE_BOOT doesn't require PowerNV any more.

The secure variables support (PPC_SECVAR_SYSFS) doesn't do anything on pSeries yet, but I don't think it's worth adding a new condition - at some stage we'll want to add a backend for pSeries anyway.

Fixes 61f879d97ce4 ("powerpc/pseries: Detect secure and trusted boot state of the system.")
---
 arch/powerpc/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/powerpc/Kconfig +1 -1
index 787e829b6f25c..997da0221780b 100644
@@ -980,7 +980,7 @@ config PPC_MEM_KEYS
 config PPC_SECURE_BOOT
 	prompt "Enable secure boot support"
 	bool
-	depends on PPC_POWERNV
+	depends on PPC_POWERNV || PPC_PSERIES
 	depends on IMA_ARCH_POLICY
 	imply IMA_SECURE_AND_OR_TRUSTED_BOOT
 	help
Signature · 1 line
2.25.1
author maintainer
#484 lore raw

PATCH 484/757 powerpc/perf: Exclude pmc5/6 from the irrelevant PMU group constraints

In reply to Greg Kroah-Hartman

From: Athira Rajeev <[email protected]>

[ Upstream commit 3b6c3adbb2fa42749c3d38cfc4d4d0b7e096bb7b ]

PMU counter support functions enforces event constraints for group of events to check if all events in a group can be monitored. Incase of event codes using PMC5 and PMC6 ( 500fa and 600f4 respectively ), not all constraints are applicable, say the threshold or sample bits. But current code includes pmc5 and pmc6 in some group constraints (like IC_DC Qualifier bits) which is actually not applicable and hence results in those events not getting counted when scheduled along with group of other events. Patch fixes this by excluding PMC5/6 from constraints which are not relevant for it.

---
 arch/powerpc/perf/isa207-common.c | 10 ++++++++++
 1 file changed, 10 insertions(+)
arch/powerpc/perf/isa207-common.c +10 -0
index 964437adec185..2848904df6383 100644
@@ -288,6 +288,15 @@ int isa207_get_constraint(u64 event, unsigned long *maskp, unsigned long *valp)
 
 		mask  |= CNST_PMC_MASK(pmc);
 		value |= CNST_PMC_VAL(pmc);
+
+		/*
+		 * PMC5 and PMC6 are used to count cycles and instructions and
+		 * they do not support most of the constraint bits. Add a check
+		 * to exclude PMC5/6 from most of the constraints except for
+		 * EBB/BHRB.
+		 */
+		if (pmc >= 5)
+			goto ebb_bhrb;
 	}
 
 	if (pmc <= 4) {
@@ -357,6 +366,7 @@ int isa207_get_constraint(u64 event, unsigned long *maskp, unsigned long *valp)
 		}
 	}
 
+ebb_bhrb:
 	if (!pmc && ebb)
 		/* EBB events must specify the PMC */
 		return -1;
Signature · 1 line
2.25.1
author maintainer
#485 lore raw

PATCH 485/757 powerpc/perf/hv-gpci: Fix starting index value

In reply to Greg Kroah-Hartman

From: Kajol Jain <[email protected]>

[ Upstream commit 0f9866f7e85765bbda86666df56c92f377c3bc10 ]

Commit 9e9f60108423f ("powerpc/perf/{hv-gpci, hv-common}: generate requests with counters annotated") adds a framework for defining gpci counters.
In this patch, they adds starting_index value as '0xffffffffffffffff'. which is wrong as starting_index is of size 32 bits.

Because of this, incase we try to run hv-gpci event we get error.

In power9 machine:

command#: perf stat -e hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/

          -C 0 -I 1000
event syntax error: '..bie_count_and_time_tlbie_instructions_issued/'
                                  \___ value too big for format, maximum is 4294967295

This patch fix this issue and changes starting_index value to '0xffffffff'

After this patch:

command#: perf stat -e hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/ -C 0 -I 1000

     1.000085786              1,024      hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/
     2.000287818              1,024      hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/
     2.439113909             17,408      hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/
Fixes 9e9f60108423 ("powerpc/perf/{hv-gpci, hv-common}: generate requests with counters annotated")
---
 arch/powerpc/perf/hv-gpci-requests.h | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
arch/powerpc/perf/hv-gpci-requests.h +3 -3
index e608f9db12ddc..8965b4463d433 100644
@@ -95,7 +95,7 @@ REQUEST(__field(0,	8,	partition_id)
 
 #define REQUEST_NAME system_performance_capabilities
 #define REQUEST_NUM 0x40
-#define REQUEST_IDX_KIND "starting_index=0xffffffffffffffff"
+#define REQUEST_IDX_KIND "starting_index=0xffffffff"
 #include I(REQUEST_BEGIN)
 REQUEST(__field(0,	1,	perf_collect_privileged)
 	__field(0x1,	1,	capability_mask)
@@ -223,7 +223,7 @@ REQUEST(__field(0,	2, partition_id)
 
 #define REQUEST_NAME system_hypervisor_times
 #define REQUEST_NUM 0xF0
-#define REQUEST_IDX_KIND "starting_index=0xffffffffffffffff"
+#define REQUEST_IDX_KIND "starting_index=0xffffffff"
 #include I(REQUEST_BEGIN)
 REQUEST(__count(0,	8,	time_spent_to_dispatch_virtual_processors)
 	__count(0x8,	8,	time_spent_processing_virtual_processor_timers)
@@ -234,7 +234,7 @@ REQUEST(__count(0,	8,	time_spent_to_dispatch_virtual_processors)
 
 #define REQUEST_NAME system_tlbie_count_and_time
 #define REQUEST_NUM 0xF4
-#define REQUEST_IDX_KIND "starting_index=0xffffffffffffffff"
+#define REQUEST_IDX_KIND "starting_index=0xffffffff"
 #include I(REQUEST_BEGIN)
 REQUEST(__count(0,	8,	tlbie_instructions_issued)
 	/*
Signature · 1 line
2.25.1
author maintainer
#486 lore raw

PATCH 486/757 perf stat: Fix out of bounds CPU map access when handling armv8_pmu events

In reply to Greg Kroah-Hartman

From: Namhyung Kim <[email protected]>

[ Upstream commit bef69bd7cfc363ab94b84ea29102f3e913ed3c6c ]

It was reported that 'perf stat' crashed when using with armv8_pmu (CPU) events with the task mode. As 'perf stat' uses an empty cpu map for task mode but armv8_pmu has its own cpu mask, it has confused which map it should use when accessing file descriptors and this causes segfaults:

(gdb) bt
#0 0x0000000000603fc8 in perf_evsel__close_fd_cpu (evsel=<optimized out>,

      cpu=<optimized out>) at evsel.c:122
  #1  perf_evsel__close_cpu (evsel=evsel@entry=0x716e950, cpu=7) at evsel.c:156
  #2  0x00000000004d4718 in evlist__close (evlist=0x70a7cb0) at util/evlist.c:1242
  #3  0x0000000000453404 in __run_perf_stat (argc=3, argc@entry=1, argv=0x30,
      argv@entry=0xfffffaea2f90, run_idx=119, run_idx@entry=1701998435)
      at builtin-stat.c:929
  #4  0x0000000000455058 in run_perf_stat (run_idx=1701998435, argv=0xfffffaea2f90,
      argc=1) at builtin-stat.c:947
  #5  cmd_stat (argc=1, argv=0xfffffaea2f90) at builtin-stat.c:2357
  #6  0x00000000004bb888 in run_builtin (p=p@entry=0x9764b8 <commands+288>,
      argc=argc@entry=4, argv=argv@entry=0xfffffaea2f90) at perf.c:312
  #7  0x00000000004bbb54 in handle_internal_command (argc=argc@entry=4,
      argv=argv@entry=0xfffffaea2f90) at perf.c:364

#8 0x0000000000435378 in run_argv (argcp=<synthetic pointer>,
argv=<synthetic pointer>) at perf.c:408
#9 main (argc=4, argv=0xfffffaea2f90) at perf.c:538

To fix this, I simply used the given cpu map unless the evsel actually is not a system-wide event (like uncore events).

Fixes 7736627b865d ("perf stat: Use affinity for closing file descriptors")
Cc Alexander Shishkin <[email protected]>
Cc Mark Rutland <[email protected]>
Cc Peter Zijlstra <[email protected]>
Cc Stephane Eranian <[email protected]>
---
 tools/lib/perf/evlist.c | 3 +++
 1 file changed, 3 insertions(+)
tools/lib/perf/evlist.c +3 -0
index 2208444ecb448..cfcdbd7be066e 100644
@@ -45,6 +45,9 @@ static void __perf_evlist__propagate_maps(struct perf_evlist *evlist,
 	if (!evsel->own_cpus || evlist->has_user_cpus) {
 		perf_cpu_map__put(evsel->cpus);
 		evsel->cpus = perf_cpu_map__get(evlist->cpus);
+	} else if (!evsel->system_wide && perf_cpu_map__empty(evlist->cpus)) {
+		perf_cpu_map__put(evsel->cpus);
+		evsel->cpus = perf_cpu_map__get(evlist->cpus);
 	} else if (evsel->cpus != evsel->own_cpus) {
 		perf_cpu_map__put(evsel->cpus);
 		evsel->cpus = perf_cpu_map__get(evsel->own_cpus);
Signature · 1 line
2.25.1
author maintainer
#487 lore raw

PATCH 487/757 i3c: master: Fix error return in cdns_i3c_master_probe()

In reply to Greg Kroah-Hartman

From: Jing Xiangfeng <[email protected]>

[ Upstream commit abea14bfdebbe9bd02f2ad24a1f3a878ed21c8f0 ]

Fix to return negative error code -ENOMEM from the error handling case instead of 0.

---
 drivers/i3c/master/i3c-master-cdns.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/i3c/master/i3c-master-cdns.c +3 -1
index 3fee8bd7fe20b..3f2226928fe05 100644
@@ -1635,8 +1635,10 @@ static int cdns_i3c_master_probe(struct platform_device *pdev)
 	master->ibi.slots = devm_kcalloc(&pdev->dev, master->ibi.num_slots,
 					 sizeof(*master->ibi.slots),
 					 GFP_KERNEL);
-	if (!master->ibi.slots)
+	if (!master->ibi.slots) {
+		ret = -ENOMEM;
 		goto err_disable_sysclk;
+	}
 
 	writel(IBIR_THR(1), master->regs + CMD_IBI_THR_CTRL);
 	writel(MST_INT_IBIR_THR, master->regs + MST_IER);
Signature · 1 line
2.25.1
author maintainer
#488 lore raw

PATCH 488/757 powerpc/security: Fix link stack flush instruction

In reply to Greg Kroah-Hartman

From: Nicholas Piggin <[email protected]>

[ Upstream commit 792254a77201453d9a77479e63dc216ad90462d2 ]

The inline execution path for the hardware assisted branch flush instruction failed to set CTR to the correct value before bcctr, causing a crash when the feature is enabled.

Fixes 4d24e21cc694 ("powerpc/security: Allow for processors that flush the link stack using the special bcctr")
---
 arch/powerpc/include/asm/asm-prototypes.h |  4 ++-
 arch/powerpc/kernel/entry_64.S            |  8 ++++--
 arch/powerpc/kernel/security.c            | 34 ++++++++++++++++-------
 3 files changed, 33 insertions(+), 13 deletions(-)
arch/powerpc/include/asm/asm-prototypes.h +3 -1
index de14b1a34d568..9652756b0694c 100644
@@ -144,7 +144,9 @@ void _kvmppc_restore_tm_pr(struct kvm_vcpu *vcpu, u64 guest_msr);
 void _kvmppc_save_tm_pr(struct kvm_vcpu *vcpu, u64 guest_msr);
 
 /* Patch sites */
-extern s32 patch__call_flush_branch_caches;
+extern s32 patch__call_flush_branch_caches1;
+extern s32 patch__call_flush_branch_caches2;
+extern s32 patch__call_flush_branch_caches3;
 extern s32 patch__flush_count_cache_return;
 extern s32 patch__flush_link_stack_return;
 extern s32 patch__call_kvm_flush_link_stack;
arch/powerpc/kernel/entry_64.S +6 -2
index 733e40eba4ebe..2f3846192ec7d 100644
@@ -430,7 +430,11 @@ _ASM_NOKPROBE_SYMBOL(save_nvgprs);
 
 #define FLUSH_COUNT_CACHE	\
 1:	nop;			\
-	patch_site 1b, patch__call_flush_branch_caches
+	patch_site 1b, patch__call_flush_branch_caches1; \
+1:	nop;			\
+	patch_site 1b, patch__call_flush_branch_caches2; \
+1:	nop;			\
+	patch_site 1b, patch__call_flush_branch_caches3
 
 .macro nops number
 	.rept \number
@@ -512,7 +516,7 @@ _GLOBAL(_switch)
 
 	kuap_check_amr r9, r10
 
-	FLUSH_COUNT_CACHE
+	FLUSH_COUNT_CACHE	/* Clobbers r9, ctr */
 
 	/*
 	 * On SMP kernels, care must be taken because a task may be
arch/powerpc/kernel/security.c +24 -10
index c9876aab31421..e4e1a94ccf6a6 100644
@@ -430,30 +430,44 @@ device_initcall(stf_barrier_debugfs_init);
 
 static void update_branch_cache_flush(void)
 {
+	u32 *site;
+
 #ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
+	site = &patch__call_kvm_flush_link_stack;
 	// This controls the branch from guest_exit_cont to kvm_flush_link_stack
 	if (link_stack_flush_type == BRANCH_CACHE_FLUSH_NONE) {
-		patch_instruction_site(&patch__call_kvm_flush_link_stack,
-				       ppc_inst(PPC_INST_NOP));
+		patch_instruction_site(site, ppc_inst(PPC_INST_NOP));
 	} else {
 		// Could use HW flush, but that could also flush count cache
-		patch_branch_site(&patch__call_kvm_flush_link_stack,
-				  (u64)&kvm_flush_link_stack, BRANCH_SET_LINK);
+		patch_branch_site(site, (u64)&kvm_flush_link_stack, BRANCH_SET_LINK);
 	}
 #endif
 
+	// Patch out the bcctr first, then nop the rest
+	site = &patch__call_flush_branch_caches3;
+	patch_instruction_site(site, ppc_inst(PPC_INST_NOP));
+	site = &patch__call_flush_branch_caches2;
+	patch_instruction_site(site, ppc_inst(PPC_INST_NOP));
+	site = &patch__call_flush_branch_caches1;
+	patch_instruction_site(site, ppc_inst(PPC_INST_NOP));
+
 	// This controls the branch from _switch to flush_branch_caches
 	if (count_cache_flush_type == BRANCH_CACHE_FLUSH_NONE &&
 	    link_stack_flush_type == BRANCH_CACHE_FLUSH_NONE) {
-		patch_instruction_site(&patch__call_flush_branch_caches,
-				       ppc_inst(PPC_INST_NOP));
+		// Nothing to be done
+
 	} else if (count_cache_flush_type == BRANCH_CACHE_FLUSH_HW &&
 		   link_stack_flush_type == BRANCH_CACHE_FLUSH_HW) {
-		patch_instruction_site(&patch__call_flush_branch_caches,
-				       ppc_inst(PPC_INST_BCCTR_FLUSH));
+		// Patch in the bcctr last
+		site = &patch__call_flush_branch_caches1;
+		patch_instruction_site(site, ppc_inst(0x39207fff)); // li r9,0x7fff
+		site = &patch__call_flush_branch_caches2;
+		patch_instruction_site(site, ppc_inst(0x7d2903a6)); // mtctr r9
+		site = &patch__call_flush_branch_caches3;
+		patch_instruction_site(site, ppc_inst(PPC_INST_BCCTR_FLUSH));
+
 	} else {
-		patch_branch_site(&patch__call_flush_branch_caches,
-				  (u64)&flush_branch_caches, BRANCH_SET_LINK);
+		patch_branch_site(site, (u64)&flush_branch_caches, BRANCH_SET_LINK);
 
 		// If we just need to flush the link stack, early return
 		if (count_cache_flush_type == BRANCH_CACHE_FLUSH_NONE) {
Signature · 1 line
2.25.1
author maintainer
#489 lore raw

PATCH 489/757 powerpc/book3s64/radix: Make radix_mem_block_size 64bit

In reply to Greg Kroah-Hartman

From: Aneesh Kumar K.V <[email protected]>

[ Upstream commit 950805f4d90eda14325ceab56b0f00d034baa8bc ]

Similar to commit 89c140bbaeee ("pseries: Fix 64 bit logical memory block panic") make sure different variables tracking lmb_size are updated to be 64 bit.

Fixes af9d00e93a4f ("powerpc/mm/radix: Create separate mappings for hot-plugged memory")
---
 arch/powerpc/include/asm/book3s/64/mmu.h | 2 +-
 arch/powerpc/mm/book3s64/radix_pgtable.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)
arch/powerpc/include/asm/book3s/64/mmu.h +1 -1
index b392384a3b150..86173bfc39feb 100644
@@ -85,7 +85,7 @@ extern unsigned int mmu_base_pid;
 /*
  * memory block size used with radix translation.
  */
-extern unsigned int __ro_after_init radix_mem_block_size;
+extern unsigned long __ro_after_init radix_mem_block_size;
 
 #define PRTB_SIZE_SHIFT	(mmu_pid_bits + 4)
 #define PRTB_ENTRIES	(1ul << mmu_pid_bits)
arch/powerpc/mm/book3s64/radix_pgtable.c +1 -1
index d5f0c10d752a3..aae8550379bae 100644
@@ -34,7 +34,7 @@
 
 unsigned int mmu_pid_bits;
 unsigned int mmu_base_pid;
-unsigned int radix_mem_block_size __ro_after_init;
+unsigned long radix_mem_block_size __ro_after_init;
 
 static __ref void *early_alloc_pgtable(unsigned long size, int nid,
 			unsigned long region_start, unsigned long region_end)
Signature · 1 line
2.25.1
author maintainer
#490 lore raw

PATCH 490/757 powerpc/papr_scm: Add PAPR command family to pass-through command-set

In reply to Greg Kroah-Hartman

From: Vaibhav Jain <[email protected]>

[ Upstream commit 13135b461cf205941308984bd3271ec7d403dc40 ]

Add NVDIMM_FAMILY_PAPR to the list of valid 'dimm_family_mask' acceptable by papr_scm. This is needed as since commit 92fe2aa859f5 ("libnvdimm: Validate command family indices") libnvdimm performs a validation of 'nd_cmd_pkg.nd_family' received as part of ND_CMD_CALL processing to ensure only known command families can use the general ND_CMD_CALL pass-through functionality.

Without this change the ND_CMD_CALL pass-through targeting NVDIMM_FAMILY_PAPR error out with -EINVAL.

Fixes 92fe2aa859f5 ("libnvdimm: Validate command family indices")
---
 arch/powerpc/platforms/pseries/papr_scm.c | 3 +++
 1 file changed, 3 insertions(+)
arch/powerpc/platforms/pseries/papr_scm.c +3 -0
index 5493bc847bd08..27268370dee00 100644
@@ -898,6 +898,9 @@ static int papr_scm_nvdimm_init(struct papr_scm_priv *p)
 	p->bus_desc.of_node = p->pdev->dev.of_node;
 	p->bus_desc.provider_name = kstrdup(p->pdev->name, GFP_KERNEL);
 
+	/* Set the dimm command family mask to accept PDSMs */
+	set_bit(NVDIMM_FAMILY_PAPR, &p->bus_desc.dimm_family_mask);
+
 	if (!p->bus_desc.provider_name)
 		return -ENOMEM;
 
Signature · 1 line
2.25.1
author maintainer
#491 lore raw

PATCH 491/757 cpufreq: powernv: Fix frame-size-overflow in powernv_cpufreq_reboot_notifier

In reply to Greg Kroah-Hartman

From: Srikar Dronamraju <[email protected]>

[ Upstream commit a2d0230b91f7e23ceb5d8fb6a9799f30517ec33a ]

The patch avoids allocating cpufreq_policy on stack hence fixing frame size overflow in 'powernv_cpufreq_reboot_notifier':

drivers/cpufreq/powernv-cpufreq.c: In function powernv_cpufreq_reboot_notifier:
drivers/cpufreq/powernv-cpufreq.c:906:1: error: the frame size of 2064 bytes is larger than 2048 bytes

Fixes cf30af76 ("cpufreq: powernv: Set the cpus to nominal frequency during reboot/kexec")
---
 drivers/cpufreq/powernv-cpufreq.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)
drivers/cpufreq/powernv-cpufreq.c +6 -3
index a9af15e994ccf..e439b43c19ebe 100644
@@ -885,12 +885,15 @@ static int powernv_cpufreq_reboot_notifier(struct notifier_block *nb,
 				unsigned long action, void *unused)
 {
 	int cpu;
-	struct cpufreq_policy cpu_policy;
+	struct cpufreq_policy *cpu_policy;
 
 	rebooting = true;
 	for_each_online_cpu(cpu) {
-		cpufreq_get_policy(&cpu_policy, cpu);
-		powernv_cpufreq_target_index(&cpu_policy, get_nominal_index());
+		cpu_policy = cpufreq_cpu_get(cpu);
+		if (!cpu_policy)
+			continue;
+		powernv_cpufreq_target_index(cpu_policy, get_nominal_index());
+		cpufreq_cpu_put(cpu_policy);
 	}
 
 	return NOTIFY_DONE;
Signature · 1 line
2.25.1
author maintainer
#492 lore raw

PATCH 492/757 IB/rdmavt: Fix sizeof mismatch

In reply to Greg Kroah-Hartman

From: Colin Ian King <[email protected]>

[ Upstream commit 8e71f694e0c819db39af2336f16eb9689f1ae53f ]

An incorrect sizeof is being used, struct rvt_ibport ** is not correct, it should be struct rvt_ibport *. Note that since ** is the same size as
* this is not causing any issues. Improve this fix by using sizeof(*rdi->ports) as this allows us to not even reference the type of the pointer. Also remove line breaks as the entire statement can fit on one line.

Addresses-Coverity: ("Sizeof not portable (SIZEOF_MISMATCH)")

Fixes ff6acd69518e ("IB/rdmavt: Add device structure allocation")
---
 drivers/infiniband/sw/rdmavt/vt.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)
drivers/infiniband/sw/rdmavt/vt.c +1 -3
index f904bb34477ae..2d534c450f3c8 100644
@@ -95,9 +95,7 @@ struct rvt_dev_info *rvt_alloc_device(size_t size, int nports)
 	if (!rdi)
 		return rdi;
 
-	rdi->ports = kcalloc(nports,
-			     sizeof(struct rvt_ibport **),
-			     GFP_KERNEL);
+	rdi->ports = kcalloc(nports, sizeof(*rdi->ports), GFP_KERNEL);
 	if (!rdi->ports)
 		ib_dealloc_device(&rdi->ibdev);
 
Signature · 1 line
2.25.1
author maintainer
#493 lore raw

PATCH 493/757 RDMA/rxe: Fix skb lifetime in rxe_rcv_mcast_pkt()

In reply to Greg Kroah-Hartman

From: Bob Pearson <[email protected]>

[ Upstream commit e7ec96fc7932f48a6d6cdd05bf82004a1a04285b ]

The changes referenced below replaced sbk_clone)_ by taking additional references, passing the skb along and then freeing the skb. This deleted the packets before they could be processed and additionally passed bad data in each packet. Since pkt is stored in skb->cb changing pkt->qp changed it for all the packets.

Replace skb_get() by sbk_clone() in rxe_rcv_mcast_pkt() for cases where multiple QPs are receiving multicast packets on the same address.

Delete kfree_skb() because the packets need to live until they have been processed by each QP. They are freed later.

Fixes 86af61764151 ("IB/rxe: remove unnecessary skb_clone")
Fixes fe896ceb5772 ("IB/rxe: replace refcount_inc with skb_get")
---
 drivers/infiniband/sw/rxe/rxe_recv.c | 17 ++++++++++++-----
 1 file changed, 12 insertions(+), 5 deletions(-)
drivers/infiniband/sw/rxe/rxe_recv.c +12 -5
index 7e123d3c4d09b..967ee8e1699cd 100644
@@ -260,6 +260,8 @@ static void rxe_rcv_mcast_pkt(struct rxe_dev *rxe, struct sk_buff *skb)
 	struct rxe_mc_elem *mce;
 	struct rxe_qp *qp;
 	union ib_gid dgid;
+	struct sk_buff *per_qp_skb;
+	struct rxe_pkt_info *per_qp_pkt;
 	int err;
 
 	if (skb->protocol == htons(ETH_P_IP))
@@ -288,21 +290,26 @@ static void rxe_rcv_mcast_pkt(struct rxe_dev *rxe, struct sk_buff *skb)
 		if (err)
 			continue;
 
-		/* if *not* the last qp in the list
-		 * increase the users of the skb then post to the next qp
+		/* for all but the last qp create a new clone of the
+		 * skb and pass to the qp.
 		 */
 		if (mce->qp_list.next != &mcg->qp_list)
-			skb_get(skb);
+			per_qp_skb = skb_clone(skb, GFP_ATOMIC);
+		else
+			per_qp_skb = skb;
 
-		pkt->qp = qp;
+		per_qp_pkt = SKB_TO_PKT(per_qp_skb);
+		per_qp_pkt->qp = qp;
 		rxe_add_ref(qp);
-		rxe_rcv_pkt(pkt, skb);
+		rxe_rcv_pkt(per_qp_pkt, per_qp_skb);
 	}
 
 	spin_unlock_bh(&mcg->mcg_lock);
 
 	rxe_drop_ref(mcg);	/* drop ref from rxe_pool_get_key. */
 
+	return;
+
 err1:
 	kfree_skb(skb);
 }
Signature · 1 line
2.25.1
author maintainer
#494 lore raw

PATCH 494/757 f2fs: reject CASEFOLD inode flag without casefold feature

In reply to Greg Kroah-Hartman

From: Eric Biggers <[email protected]>

[ Upstream commit f6322f3f1212e005e7e6aa82ceb62be53030a64b ]

syzbot reported:

    general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN
    KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
    CPU: 0 PID: 6860 Comm: syz-executor835 Not tainted 5.9.0-rc8-syzkaller #0
    Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
    RIP: 0010:utf8_casefold+0x43/0x1b0 fs/unicode/utf8-core.c:107
    [...]
    Call Trace:
     f2fs_init_casefolded_name fs/f2fs/dir.c:85 [inline]
     __f2fs_setup_filename fs/f2fs/dir.c:118 [inline]
     f2fs_prepare_lookup+0x3bf/0x640 fs/f2fs/dir.c:163
     f2fs_lookup+0x10d/0x920 fs/f2fs/namei.c:494
     __lookup_hash+0x115/0x240 fs/namei.c:1445
     filename_create+0x14b/0x630 fs/namei.c:3467
     user_path_create fs/namei.c:3524 [inline]
     do_mkdirat+0x56/0x310 fs/namei.c:3664
     do_syscall_64+0x31/0x70 arch/x86/entry/common.c:46
     entry_SYSCALL_64_after_hwframe+0x44/0xa9
    [...]

The problem is that an inode has F2FS_CASEFOLD_FL set, but the filesystem doesn't have the casefold feature flag set, and therefore super_block::s_encoding is NULL.

Fix this by making sanity_check_inode() reject inodes that have F2FS_CASEFOLD_FL when the filesystem doesn't have the casefold feature.

Reported-by [email protected]
Fixes 2c2eb7a300cd ("f2fs: Support case-insensitive file name lookups")
---
 fs/f2fs/inode.c | 7 +++++++
 1 file changed, 7 insertions(+)
fs/f2fs/inode.c +7 -0
index 66969ae852b97..5195e083fc1e6 100644
@@ -287,6 +287,13 @@ static bool sanity_check_inode(struct inode *inode, struct page *node_page)
 		return false;
 	}
 
+	if ((fi->i_flags & F2FS_CASEFOLD_FL) && !f2fs_sb_has_casefold(sbi)) {
+		set_sbi_flag(sbi, SBI_NEED_FSCK);
+		f2fs_warn(sbi, "%s: inode (ino=%lx) has casefold flag, but casefold feature is off",
+			  __func__, inode->i_ino);
+		return false;
+	}
+
 	if (f2fs_has_extra_attr(inode) && f2fs_sb_has_compression(sbi) &&
 			fi->i_flags & F2FS_COMPR_FL &&
 			F2FS_FITS_IN_INODE(ri, fi->i_extra_isize,
Signature · 1 line
2.25.1
author maintainer
#495 lore raw

PATCH 495/757 um: vector: Use GFP_ATOMIC under spin lock

In reply to Greg Kroah-Hartman

From: Tiezhu Yang <[email protected]>

[ Upstream commit e4e721fe4ccb504a29d1e8d4047667557281d932 ]

Use GFP_ATOMIC instead of GFP_KERNEL under spin lock to fix possible sleep-in-atomic-context bugs.

Fixes 9807019a62dc ("um: Loadable BPF "Firmware" for vector drivers")
---
 arch/um/drivers/vector_kern.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
arch/um/drivers/vector_kern.c +2 -2
index 8735c468230a5..555203e3e7b45 100644
@@ -1403,7 +1403,7 @@ static int vector_net_load_bpf_flash(struct net_device *dev,
 		kfree(vp->bpf->filter);
 		vp->bpf->filter = NULL;
 	} else {
-		vp->bpf = kmalloc(sizeof(struct sock_fprog), GFP_KERNEL);
+		vp->bpf = kmalloc(sizeof(struct sock_fprog), GFP_ATOMIC);
 		if (vp->bpf == NULL) {
 			netdev_err(dev, "failed to allocate memory for firmware\n");
 			goto flash_fail;
@@ -1415,7 +1415,7 @@ static int vector_net_load_bpf_flash(struct net_device *dev,
 	if (request_firmware(&fw, efl->data, &vdevice->pdev.dev))
 		goto flash_fail;
 
-	vp->bpf->filter = kmemdup(fw->data, fw->size, GFP_KERNEL);
+	vp->bpf->filter = kmemdup(fw->data, fw->size, GFP_ATOMIC);
 	if (!vp->bpf->filter)
 		goto free_buffer;
 
Signature · 1 line
2.25.1
author maintainer
#496 lore raw

PATCH 496/757 um: time-travel: Fix IRQ handling in time_travel_handle_message()

In reply to Greg Kroah-Hartman

From: Johannes Berg <[email protected]>

[ Upstream commit ebef8ea2ba967026192a26f4529890893919bc57 ]

As the comment here indicates, we need to do the polling in the idle loop without blocking interrupts, since interrupts can be vhost-user messages that we must process even while in our idle loop.

I don't know why I explained one thing and implemented another, but we have indeed observed random hangs due to this, depending on the timing of the messages.

Fixes 88ce64249233 ("um: Implement time-travel=ext")
---
 arch/um/kernel/time.c | 14 +++++++++-----
 1 file changed, 9 insertions(+), 5 deletions(-)
arch/um/kernel/time.c +9 -5
index 25eaa6a0c6583..c07436e89e599 100644
@@ -70,13 +70,17 @@ static void time_travel_handle_message(struct um_timetravel_msg *msg,
 	 * read of the message and write of the ACK.
 	 */
 	if (mode != TTMH_READ) {
+		bool disabled = irqs_disabled();
+
+		BUG_ON(mode == TTMH_IDLE && !disabled);
+
+		if (disabled)
+			local_irq_enable();
 		while (os_poll(1, &time_travel_ext_fd) != 0) {
-			if (mode == TTMH_IDLE) {
-				BUG_ON(!irqs_disabled());
-				local_irq_enable();
-				local_irq_disable();
-			}
+			/* nothing */
 		}
+		if (disabled)
+			local_irq_disable();
 	}
 
 	ret = os_read_file(time_travel_ext_fd, msg, sizeof(*msg));
Signature · 1 line
2.25.1
author maintainer
#497 lore raw

PATCH 497/757 thermal: core: Adding missing nlmsg_free() in thermal_genl_sampling_temp()

In reply to Greg Kroah-Hartman

From: Jing Xiangfeng <[email protected]>

[ Upstream commit 48b458591749d35c927351b4960b49e35af30fe6 ]

thermal_genl_sampling_temp() misses to call nlmsg_free() in an error path.

Jump to out_free to fix it.

Fixes 1ce50e7d408ef2 ("thermal: core: genetlink support for events/cmd/sampling")
---
 drivers/thermal/thermal_netlink.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/thermal/thermal_netlink.c +2 -1
index af7b2383e8f6b..019f4812def6c 100644
@@ -78,7 +78,7 @@ int thermal_genl_sampling_temp(int id, int temp)
 	hdr = genlmsg_put(skb, 0, 0, &thermal_gnl_family, 0,
 			  THERMAL_GENL_SAMPLING_TEMP);
 	if (!hdr)
-		return -EMSGSIZE;
+		goto out_free;
 
 	if (nla_put_u32(skb, THERMAL_GENL_ATTR_TZ_ID, id))
 		goto out_cancel;
@@ -93,6 +93,7 @@ int thermal_genl_sampling_temp(int id, int temp)
 	return 0;
 out_cancel:
 	genlmsg_cancel(skb, hdr);
+out_free:
 	nlmsg_free(skb);
 
 	return -EMSGSIZE;
Signature · 1 line
2.25.1
author maintainer
#498 lore raw

PATCH 498/757 maiblox: mediatek: Fix handling of platform_get_irq() error

In reply to Greg Kroah-Hartman

From: Krzysztof Kozlowski <[email protected]>

[ Upstream commit 558e4c36ec9f2722af4fe8ef84dc812bcdb5c43a ]

platform_get_irq() returns -ERRNO on error. In such case casting to u32 and comparing to 0 would pass the check.

Fixes 623a6143a845 ("mailbox: mediatek: Add Mediatek CMDQ driver")
---
 drivers/mailbox/mtk-cmdq-mailbox.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)
drivers/mailbox/mtk-cmdq-mailbox.c +3 -5
index 484d4438cd835..5665b6ea8119f 100644
@@ -69,7 +69,7 @@ struct cmdq_task {
 struct cmdq {
 	struct mbox_controller	mbox;
 	void __iomem		*base;
-	u32			irq;
+	int			irq;
 	u32			thread_nr;
 	u32			irq_mask;
 	struct cmdq_thread	*thread;
@@ -525,10 +525,8 @@ static int cmdq_probe(struct platform_device *pdev)
 	}
 
 	cmdq->irq = platform_get_irq(pdev, 0);
-	if (!cmdq->irq) {
-		dev_err(dev, "failed to get irq\n");
-		return -EINVAL;
-	}
+	if (cmdq->irq < 0)
+		return cmdq->irq;
 
 	plat_data = (struct gce_plat *)of_device_get_match_data(dev);
 	if (!plat_data) {
Signature · 1 line
2.25.1
author maintainer
#499 lore raw

PATCH 499/757 perf trace: Fix off by ones in memset() after realloc() in arches using libaudit

In reply to Greg Kroah-Hartman

From: Jiri Slaby <[email protected]>

[ Upstream commit f3013f7ed465479e60c1ab1921a5718fc541cc3b ]

'perf trace ls' started crashing after commit d21cb73a9025 on !HAVE_SYSCALL_TABLE_SUPPORT configs (armv7l here) like this:

0 strlen () at ../sysdeps/arm/armv6t2/strlen.S:126
1 0xb6800780 in __vfprintf_internal (s=0xbeff9908, s@entry=0xbeff9900, format=0xa27160 "]: %s()", ap=..., mode_flags=<optimized out>) at vfprintf-internal.c:1688
...

  5  0x0056ecdc in fprintf (__fmt=0xa27160 "]: %s()", __stream=<optimized out>) at /usr/include/bits/stdio2.h:100
  6  trace__sys_exit (trace=trace@entry=0xbeffc710, evsel=evsel@entry=0xd968d0, event=<optimized out>, sample=sample@entry=0xbeffc3e8) at builtin-trace.c:2475
  7  0x00566d40 in trace__handle_event (sample=0xbeffc3e8, event=<optimized out>, trace=0xbeffc710) at builtin-trace.c:3122

...
15 main (argc=2, argv=0xbefff6e8) at perf.c:538

It is because memset in trace__read_syscall_info zeroes wrong memory:

1) when initializing for the first time, it does not reset the last id.

2) in other cases, it resets the last id of previous buffer.

ad 1) it causes the crash above as sc->name used in the fprintf above
contains garbage.

ad 2) it sets nonexistent from true back to false for id 11 here. Not
sure, what the consequences are.

So fix it by introducing a special case for the initial initialization and do the right +1 in both cases.

Fixes d21cb73a9025 ("perf trace: Grow the syscall table as needed when using libaudit")
Cc Adrian Hunter <[email protected]>
Cc Jiri Olsa <[email protected]>
Cc Namhyung Kim <[email protected]>
Cc Peter Zijlstra <[email protected]>
---
 tools/perf/builtin-trace.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)
tools/perf/builtin-trace.c +5 -1
index bea461b6f937b..44a75f234db17 100644
@@ -1762,7 +1762,11 @@ static int trace__read_syscall_info(struct trace *trace, int id)
 		if (table == NULL)
 			return -ENOMEM;
 
-		memset(table + trace->sctbl->syscalls.max_id, 0, (id - trace->sctbl->syscalls.max_id) * sizeof(*sc));
+		// Need to memset from offset 0 and +1 members if brand new
+		if (trace->syscalls.table == NULL)
+			memset(table, 0, (id + 1) * sizeof(*sc));
+		else
+			memset(table + trace->sctbl->syscalls.max_id + 1, 0, (id - trace->sctbl->syscalls.max_id) * sizeof(*sc));
 
 		trace->syscalls.table	      = table;
 		trace->sctbl->syscalls.max_id = id;
Signature · 1 line
2.25.1
author maintainer
#500 lore raw

PATCH 500/757 selftests/powerpc: Fix eeh-basic.sh exit codes

In reply to Greg Kroah-Hartman

From: Oliver O'Halloran <[email protected]>

[ Upstream commit 996f9e0f93f16211945c8d5f18f296a88cb32f91 ]

The kselftests test running infrastructure expects tests to finish with an exit code of 4 if the test decided it should be skipped. Currently eeh-basic.sh exits with the number of devices that failed to recover, so if four devices didn't recover we'll report a skip instead of a fail.

Fix this by checking if the return code is non-zero and report success and failure by returning 0 or 1 respectively. For the cases where should actually skip return 4.

Fixes 85d86c8aa52e ("selftests/powerpc: Add basic EEH selftest")
---
 tools/testing/selftests/powerpc/eeh/eeh-basic.sh | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)
tools/testing/selftests/powerpc/eeh/eeh-basic.sh +6 -3
index 8a8d0f456946c..0d783e1065c86 100755
@@ -1,17 +1,19 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0-only
 
+KSELFTESTS_SKIP=4
+
 . ./eeh-functions.sh
 
 if ! eeh_supported ; then
 	echo "EEH not supported on this system, skipping"
-	exit 0;
+	exit $KSELFTESTS_SKIP;
 fi
 
 if [ ! -e "/sys/kernel/debug/powerpc/eeh_dev_check" ] && \
    [ ! -e "/sys/kernel/debug/powerpc/eeh_dev_break" ] ; then
 	echo "debugfs EEH testing files are missing. Is debugfs mounted?"
-	exit 1;
+	exit $KSELFTESTS_SKIP;
 fi
 
 pre_lspci=`mktemp`
@@ -84,4 +86,5 @@ echo "$failed devices failed to recover ($dev_count tested)"
 lspci | diff -u $pre_lspci -
 rm -f $pre_lspci
 
-exit $failed
+test "$failed" == 0
+exit $?
Signature · 1 line
2.25.1
author maintainer
#501 lore raw

PATCH 501/757 f2fs: wait for sysfs kobject removal before freeing f2fs_sb_info

In reply to Greg Kroah-Hartman

From: Jamie Iles <[email protected]>

[ Upstream commit ae284d87abade58c8db7760c808f311ef1ce693c ]

syzkaller found that with CONFIG_DEBUG_KOBJECT_RELEASE=y, unmounting an f2fs filesystem could result in the following splat:

kobject: 'loop5' ((____ptrval____)): kobject_release, parent 0000000000000000 (delayed 250)
kobject: 'f2fs_xattr_entry-7:5' ((____ptrval____)): kobject_release, parent 0000000000000000 (delayed 750)

  ------------[ cut here ]------------
  ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x98
  WARNING: CPU: 0 PID: 699 at lib/debugobjects.c:485 debug_print_object+0x180/0x240
  Kernel panic - not syncing: panic_on_warn set ...
  CPU: 0 PID: 699 Comm: syz-executor.5 Tainted: G S                5.9.0-rc8+ #101
  Hardware name: linux,dummy-virt (DT)
  Call trace:
   dump_backtrace+0x0/0x4d8
   show_stack+0x34/0x48
   dump_stack+0x174/0x1f8
   panic+0x360/0x7a0
   __warn+0x244/0x2ec
   report_bug+0x240/0x398
   bug_handler+0x50/0xc0
   call_break_hook+0x160/0x1d8
   brk_handler+0x30/0xc0
   do_debug_exception+0x184/0x340
   el1_dbg+0x48/0xb0
   el1_sync_handler+0x170/0x1c8
   el1_sync+0x80/0x100
   debug_print_object+0x180/0x240
   debug_check_no_obj_freed+0x200/0x430
   slab_free_freelist_hook+0x190/0x210
   kfree+0x13c/0x460
   f2fs_put_super+0x624/0xa58
   generic_shutdown_super+0x120/0x300
   kill_block_super+0x94/0xf8
   kill_f2fs_super+0x244/0x308
   deactivate_locked_super+0x104/0x150
   deactivate_super+0x118/0x148
   cleanup_mnt+0x27c/0x3c0
   __cleanup_mnt+0x28/0x38
   task_work_run+0x10c/0x248
   do_notify_resume+0x9d4/0x1188
   work_pending+0x8/0x34c

Like the error handling for f2fs_register_sysfs(), we need to wait for the kobject to be destroyed before returning to prevent a potential use-after-free.

Fixes bf9e697ecd42 ("f2fs: expose features to sysfs entry")
Cc Jaegeuk Kim <[email protected]>
Cc Chao Yu <[email protected]>
---
 fs/f2fs/sysfs.c | 1 +
 1 file changed, 1 insertion(+)
fs/f2fs/sysfs.c +1 -0
index 88ed9969cc862..5fe7d8fa93801 100644
@@ -968,4 +968,5 @@ void f2fs_unregister_sysfs(struct f2fs_sb_info *sbi)
 	}
 	kobject_del(&sbi->s_kobj);
 	kobject_put(&sbi->s_kobj);
+	wait_for_completion(&sbi->s_kobj_unregister);
 }
Signature · 1 line
2.25.1
author maintainer
#502 lore raw

PATCH 502/757 afs: Fix rapid cell addition/removal by not using RCU on cells tree

In reply to Greg Kroah-Hartman

From: David Howells <[email protected]>

[ Upstream commit 92e3cc91d8f51ce64a8b7c696377180953dd316e ]

There are a number of problems that are being seen by the rapidly mounting and unmounting an afs dynamic root with an explicit cell and volume specified (which should probably be rejected, but that's a separate issue):

What the tests are doing is to look up/create a cell record for the name given and then tear it down again without actually using it to try to talk to a server. This is repeated endlessly, very fast, and the new cell collides with the old one if it's not quick enough to reuse it.

It appears (as suggested by Hillf Danton) that the search through the RB tree under a read_seqbegin_or_lock() under RCU conditions isn't safe and that it's not blocking the write_seqlock(), despite taking two passes at it. He suggested that the code should take a ref on the cell it's attempting to look at - but this shouldn't be necessary until we've compared the cell names. It's possible that I'm missing a barrier somewhere.

However, using an RCU search for this is overkill, really - we only need to access the cell name in a few places, and they're places where we're may end up sleeping anyway.

Fix this by switching to an R/W semaphore instead.

Additionally, draw the down_read() call inside the function (renamed to afs_find_cell()) since all the callers were taking the RCU read lock (or should've been[*]).

[*] afs_probe_cell_name() should have been, but that doesn't appear to be involved in the bug reports.

The symptoms of this look like:

	general protection fault, probably for non-canonical address 0xf27d208691691fdb: 0000 [#1] PREEMPT SMP KASAN
	KASAN: maybe wild-memory-access in range [0x93e924348b48fed8-0x93e924348b48fedf]
	...
	RIP: 0010:strncasecmp lib/string.c:52 [inline]
	RIP: 0010:strncasecmp+0x5f/0x240 lib/string.c:43
	 afs_lookup_cell_rcu+0x313/0x720 fs/afs/cell.c:88
	 afs_lookup_cell+0x2ee/0x1440 fs/afs/cell.c:249
	 afs_parse_source fs/afs/super.c:290 [inline]
	...
Fixes 989782dcdc91 ("afs: Overhaul cell database management")
Reported-by [email protected]
cc Hillf Danton <[email protected]>
---
 fs/afs/cell.c     | 131 ++++++++++++++++++++--------------------------
 fs/afs/dynroot.c  |  21 +++-----
 fs/afs/internal.h |   6 +--
 fs/afs/main.c     |   2 +-
 fs/afs/super.c    |   4 +-
 5 files changed, 71 insertions(+), 93 deletions(-)
fs/afs/cell.c +58 -73
index 5b79cdceefa0f..5da83e84952a2 100644
@@ -41,15 +41,15 @@ static void afs_set_cell_timer(struct afs_net *net, time64_t delay)
 }
 
 /*
- * Look up and get an activation reference on a cell record under RCU
- * conditions.  The caller must hold the RCU read lock.
+ * Look up and get an activation reference on a cell record.  The caller must
+ * hold net->cells_lock at least read-locked.
  */
-struct afs_cell *afs_lookup_cell_rcu(struct afs_net *net,
-				     const char *name, unsigned int namesz)
+static struct afs_cell *afs_find_cell_locked(struct afs_net *net,
+					     const char *name, unsigned int namesz)
 {
 	struct afs_cell *cell = NULL;
 	struct rb_node *p;
-	int n, seq = 0, ret = 0;
+	int n;
 
 	_enter("%*.*s", namesz, namesz, name);
 
@@ -58,61 +58,48 @@ struct afs_cell *afs_lookup_cell_rcu(struct afs_net *net,
 	if (namesz > AFS_MAXCELLNAME)
 		return ERR_PTR(-ENAMETOOLONG);
 
-	do {
-		/* Unfortunately, rbtree walking doesn't give reliable results
-		 * under just the RCU read lock, so we have to check for
-		 * changes.
-		 */
-		if (cell)
-			afs_put_cell(net, cell);
-		cell = NULL;
-		ret = -ENOENT;
-
-		read_seqbegin_or_lock(&net->cells_lock, &seq);
-
-		if (!name) {
-			cell = rcu_dereference_raw(net->ws_cell);
-			if (cell) {
-				afs_get_cell(cell);
-				ret = 0;
-				break;
-			}
-			ret = -EDESTADDRREQ;
-			continue;
-		}
+	if (!name) {
+		cell = net->ws_cell;
+		if (!cell)
+			return ERR_PTR(-EDESTADDRREQ);
+		afs_get_cell(cell);
+		return cell;
+	}
 
-		p = rcu_dereference_raw(net->cells.rb_node);
-		while (p) {
-			cell = rb_entry(p, struct afs_cell, net_node);
-
-			n = strncasecmp(cell->name, name,
-					min_t(size_t, cell->name_len, namesz));
-			if (n == 0)
-				n = cell->name_len - namesz;
-			if (n < 0) {
-				p = rcu_dereference_raw(p->rb_left);
-			} else if (n > 0) {
-				p = rcu_dereference_raw(p->rb_right);
-			} else {
-				if (atomic_inc_not_zero(&cell->usage)) {
-					ret = 0;
-					break;
-				}
-				/* We want to repeat the search, this time with
-				 * the lock properly locked.
-				 */
-			}
-			cell = NULL;
-		}
+	p = net->cells.rb_node;
+	while (p) {
+		cell = rb_entry(p, struct afs_cell, net_node);
 
-	} while (need_seqretry(&net->cells_lock, seq));
+		n = strncasecmp(cell->name, name,
+				min_t(size_t, cell->name_len, namesz));
+		if (n == 0)
+			n = cell->name_len - namesz;
+		if (n < 0)
+			p = p->rb_left;
+		else if (n > 0)
+			p = p->rb_right;
+		else
+			goto found;
+	}
+
+	return ERR_PTR(-ENOENT);
 
-	done_seqretry(&net->cells_lock, seq);
+found:
+	if (!atomic_inc_not_zero(&cell->usage))
+		return ERR_PTR(-ENOENT);
 
-	if (ret != 0 && cell)
-		afs_put_cell(net, cell);
+	return cell;
+}
 
-	return ret == 0 ? cell : ERR_PTR(ret);
+struct afs_cell *afs_find_cell(struct afs_net *net,
+			       const char *name, unsigned int namesz)
+{
+	struct afs_cell *cell;
+
+	down_read(&net->cells_lock);
+	cell = afs_find_cell_locked(net, name, namesz);
+	up_read(&net->cells_lock);
+	return cell;
 }
 
 /*
@@ -245,9 +232,7 @@ struct afs_cell *afs_lookup_cell(struct afs_net *net,
 	_enter("%s,%s", name, vllist);
 
 	if (!excl) {
-		rcu_read_lock();
-		cell = afs_lookup_cell_rcu(net, name, namesz);
-		rcu_read_unlock();
+		cell = afs_find_cell(net, name, namesz);
 		if (!IS_ERR(cell))
 			goto wait_for_cell;
 	}
@@ -268,7 +253,7 @@ struct afs_cell *afs_lookup_cell(struct afs_net *net,
 	/* Find the insertion point and check to see if someone else added a
 	 * cell whilst we were allocating.
 	 */
-	write_seqlock(&net->cells_lock);
+	down_write(&net->cells_lock);
 
 	pp = &net->cells.rb_node;
 	parent = NULL;
@@ -293,7 +278,7 @@ struct afs_cell *afs_lookup_cell(struct afs_net *net,
 	rb_link_node_rcu(&cell->net_node, parent, pp);
 	rb_insert_color(&cell->net_node, &net->cells);
 	atomic_inc(&net->cells_outstanding);
-	write_sequnlock(&net->cells_lock);
+	up_write(&net->cells_lock);
 
 	queue_work(afs_wq, &cell->manager);
 
@@ -323,7 +308,7 @@ struct afs_cell *afs_lookup_cell(struct afs_net *net,
 		afs_get_cell(cursor);
 		ret = 0;
 	}
-	write_sequnlock(&net->cells_lock);
+	up_write(&net->cells_lock);
 	kfree(candidate);
 	if (ret == 0)
 		goto wait_for_cell;
@@ -377,10 +362,10 @@ int afs_cell_init(struct afs_net *net, const char *rootcell)
 		afs_get_cell(new_root);
 
 	/* install the new cell */
-	write_seqlock(&net->cells_lock);
-	old_root = rcu_access_pointer(net->ws_cell);
-	rcu_assign_pointer(net->ws_cell, new_root);
-	write_sequnlock(&net->cells_lock);
+	down_write(&net->cells_lock);
+	old_root = net->ws_cell;
+	net->ws_cell = new_root;
+	up_write(&net->cells_lock);
 
 	afs_put_cell(net, old_root);
 	_leave(" = 0");
@@ -674,12 +659,12 @@ static void afs_manage_cell(struct work_struct *work)
 	switch (cell->state) {
 	case AFS_CELL_INACTIVE:
 	case AFS_CELL_FAILED:
-		write_seqlock(&net->cells_lock);
+		down_write(&net->cells_lock);
 		usage = 1;
 		deleted = atomic_try_cmpxchg_relaxed(&cell->usage, &usage, 0);
 		if (deleted)
 			rb_erase(&cell->net_node, &net->cells);
-		write_sequnlock(&net->cells_lock);
+		up_write(&net->cells_lock);
 		if (deleted)
 			goto final_destruction;
 		if (cell->state == AFS_CELL_FAILED)
@@ -779,7 +764,7 @@ void afs_manage_cells(struct work_struct *work)
 	 * lack of use and cells whose DNS results have expired and dispatch
 	 * their managers.
 	 */
-	read_seqlock_excl(&net->cells_lock);
+	down_read(&net->cells_lock);
 
 	for (cursor = rb_first(&net->cells); cursor; cursor = rb_next(cursor)) {
 		struct afs_cell *cell =
@@ -824,7 +809,7 @@ void afs_manage_cells(struct work_struct *work)
 			queue_work(afs_wq, &cell->manager);
 	}
 
-	read_sequnlock_excl(&net->cells_lock);
+	up_read(&net->cells_lock);
 
 	/* Update the timer on the way out.  We have to pass an increment on
 	 * cells_outstanding in the namespace that we are in to the timer or
@@ -854,10 +839,10 @@ void afs_cell_purge(struct afs_net *net)
 
 	_enter("");
 
-	write_seqlock(&net->cells_lock);
-	ws = rcu_access_pointer(net->ws_cell);
-	RCU_INIT_POINTER(net->ws_cell, NULL);
-	write_sequnlock(&net->cells_lock);
+	down_write(&net->cells_lock);
+	ws = net->ws_cell;
+	net->ws_cell = NULL;
+	up_write(&net->cells_lock);
 	afs_put_cell(net, ws);
 
 	_debug("del timer");
fs/afs/dynroot.c +8 -13
index 7b784af604fd9..5b8de4fee6cda 100644
@@ -123,7 +123,7 @@ static int afs_probe_cell_name(struct dentry *dentry)
 		len--;
 	}
 
-	cell = afs_lookup_cell_rcu(net, name, len);
+	cell = afs_find_cell(net, name, len);
 	if (!IS_ERR(cell)) {
 		afs_put_cell(net, cell);
 		return 0;
@@ -179,7 +179,6 @@ static struct dentry *afs_lookup_atcell(struct dentry *dentry)
 	struct afs_cell *cell;
 	struct afs_net *net = afs_d2net(dentry);
 	struct dentry *ret;
-	unsigned int seq = 0;
 	char *name;
 	int len;
 
@@ -191,17 +190,13 @@ static struct dentry *afs_lookup_atcell(struct dentry *dentry)
 	if (!name)
 		goto out_p;
 
-	rcu_read_lock();
-	do {
-		read_seqbegin_or_lock(&net->cells_lock, &seq);
-		cell = rcu_dereference_raw(net->ws_cell);
-		if (cell) {
-			len = cell->name_len;
-			memcpy(name, cell->name, len + 1);
-		}
-	} while (need_seqretry(&net->cells_lock, seq));
-	done_seqretry(&net->cells_lock, seq);
-	rcu_read_unlock();
+	down_read(&net->cells_lock);
+	cell = net->ws_cell;
+	if (cell) {
+		len = cell->name_len;
+		memcpy(name, cell->name, len + 1);
+	}
+	up_read(&net->cells_lock);
 
 	ret = ERR_PTR(-ENOENT);
 	if (!cell)
fs/afs/internal.h +3 -3
index e5f0446f27e5f..257c0f07742fb 100644
@@ -263,11 +263,11 @@ struct afs_net {
 
 	/* Cell database */
 	struct rb_root		cells;
-	struct afs_cell __rcu	*ws_cell;
+	struct afs_cell		*ws_cell;
 	struct work_struct	cells_manager;
 	struct timer_list	cells_timer;
 	atomic_t		cells_outstanding;
-	seqlock_t		cells_lock;
+	struct rw_semaphore	cells_lock;
 	struct mutex		cells_alias_lock;
 
 	struct mutex		proc_cells_lock;
@@ -917,7 +917,7 @@ static inline bool afs_cb_is_broken(unsigned int cb_break,
  * cell.c
  */
 extern int afs_cell_init(struct afs_net *, const char *);
-extern struct afs_cell *afs_lookup_cell_rcu(struct afs_net *, const char *, unsigned);
+extern struct afs_cell *afs_find_cell(struct afs_net *, const char *, unsigned);
 extern struct afs_cell *afs_lookup_cell(struct afs_net *, const char *, unsigned,
 					const char *, bool);
 extern struct afs_cell *afs_get_cell(struct afs_cell *);
fs/afs/main.c +1 -1
index 31b472f7c734c..accdd8970e7c0 100644
@@ -78,7 +78,7 @@ static int __net_init afs_net_init(struct net *net_ns)
 	mutex_init(&net->socket_mutex);
 
 	net->cells = RB_ROOT;
-	seqlock_init(&net->cells_lock);
+	init_rwsem(&net->cells_lock);
 	INIT_WORK(&net->cells_manager, afs_manage_cells);
 	timer_setup(&net->cells_timer, afs_cells_timer, 0);
 
fs/afs/super.c +1 -3
index b552357b1d137..0be99016ecfb9 100644
@@ -634,9 +634,7 @@ static int afs_init_fs_context(struct fs_context *fc)
 	ctx->net = afs_net(fc->net_ns);
 
 	/* Default to the workstation cell. */
-	rcu_read_lock();
-	cell = afs_lookup_cell_rcu(ctx->net, NULL, 0);
-	rcu_read_unlock();
+	cell = afs_find_cell(ctx->net, NULL, 0);
 	if (IS_ERR(cell))
 		cell = NULL;
 	ctx->cell = cell;
Signature · 1 line
2.25.1
author maintainer
#503 lore raw

PATCH 503/757 afs: Fix cell refcounting by splitting the usage counter

In reply to Greg Kroah-Hartman

From: David Howells <[email protected]>

[ Upstream commit 88c853c3f5c0a07c5db61b494ee25152535cfeee ]

Management of the lifetime of afs_cell struct has some problems due to the usage counter being used to determine whether objects of that type are in use in addition to whether anyone might be interested in the structure.

This is made trickier by cell objects being cached for a period of time in case they're quickly reused as they hold the result of a setup process that may be slow (DNS lookups, AFS RPC ops).

Problems include the cached root volume from alias resolution pinning its parent cell record, rmmod occasionally hanging and occasionally producing assertion failures.

Fix this by splitting the count of active users from the struct reference count. Things then work as follows:

(1) The cell cache keeps +1 on the cell's activity count and this has to be dropped before the cell can be removed. afs_manage_cell() tries to exchange the 1 to a 0 with the cells_lock write-locked, and if successful, the record is removed from the net->cells.

(2) One struct ref is 'owned' by the activity count. That is put when the active count is reduced to 0 (final_destruction label).

(3) A ref can be held on a cell whilst it is queued for management on a work queue without confusing the active count. afs_queue_cell() is added to wrap this.

(4) The queue's ref is dropped at the end of the management. This is split out into a separate function, afs_manage_cell_work().

(5) The root volume record is put after a cell is removed (at the final_destruction label) rather then in the RCU destruction routine.

(6) Volumes hold struct refs, but aren't active users.

(7) Both counts are displayed in /proc/net/afs/cells.

There are some management function changes:

(*) afs_put_cell() now just decrements the refcount and triggers the RCU
destruction if it becomes 0. It no longer sets a timer to have the manager do this.

(*) afs_use_cell() and afs_unuse_cell() are added to increase and decrease
the active count. afs_unuse_cell() sets the management timer.

(*) afs_queue_cell() is added to queue a cell with approprate refs.

There are also some other fixes:

(*) Don't let /proc/net/afs/cells access a cell's vllist if it's NULL.

(*) Make sure that candidate cells in lookups are properly destroyed
rather than being simply kfree'd. This ensures the bits it points to are destroyed also.

(*) afs_dec_cells_outstanding() is now called in cell destruction rather
than at "final_destruction". This ensures that cell->net is still valid to the end of the destructor.

(*) As a consequence of the previous two changes, move the increment of
net->cells_outstanding that was at the point of insertion into the tree to the allocation routine to correctly balance things.

Fixes 989782dcdc91 ("afs: Overhaul cell database management")
---
 fs/afs/cell.c      | 149 +++++++++++++++++++++++++++++++--------------
 fs/afs/dynroot.c   |   2 +-
 fs/afs/internal.h  |   8 ++-
 fs/afs/mntpt.c     |   4 +-
 fs/afs/proc.c      |  23 ++++---
 fs/afs/super.c     |  12 ++--
 fs/afs/vl_alias.c  |   8 +--
 fs/afs/vl_rotate.c |   2 +-
 fs/afs/volume.c    |   4 +-
 9 files changed, 136 insertions(+), 76 deletions(-)
fs/afs/cell.c +103 -46
index 5da83e84952a2..c906000b0ff84 100644
@@ -19,7 +19,7 @@ static unsigned __read_mostly afs_cell_gc_delay = 10;
 static unsigned __read_mostly afs_cell_min_ttl = 10 * 60;
 static unsigned __read_mostly afs_cell_max_ttl = 24 * 60 * 60;
 
-static void afs_manage_cell(struct work_struct *);
+static void afs_manage_cell_work(struct work_struct *);
 
 static void afs_dec_cells_outstanding(struct afs_net *net)
 {
@@ -62,8 +62,7 @@ static struct afs_cell *afs_find_cell_locked(struct afs_net *net,
 		cell = net->ws_cell;
 		if (!cell)
 			return ERR_PTR(-EDESTADDRREQ);
-		afs_get_cell(cell);
-		return cell;
+		goto found;
 	}
 
 	p = net->cells.rb_node;
@@ -85,12 +84,12 @@ static struct afs_cell *afs_find_cell_locked(struct afs_net *net,
 	return ERR_PTR(-ENOENT);
 
 found:
-	if (!atomic_inc_not_zero(&cell->usage))
-		return ERR_PTR(-ENOENT);
-
-	return cell;
+	return afs_use_cell(cell);
 }
 
+/*
+ * Look up and get an activation reference on a cell record.
+ */
 struct afs_cell *afs_find_cell(struct afs_net *net,
 			       const char *name, unsigned int namesz)
 {
@@ -153,8 +152,9 @@ static struct afs_cell *afs_alloc_cell(struct afs_net *net,
 		cell->name[i] = tolower(name[i]);
 	cell->name[i] = 0;
 
-	atomic_set(&cell->usage, 2);
-	INIT_WORK(&cell->manager, afs_manage_cell);
+	atomic_set(&cell->ref, 1);
+	atomic_set(&cell->active, 0);
+	INIT_WORK(&cell->manager, afs_manage_cell_work);
 	cell->volumes = RB_ROOT;
 	INIT_HLIST_HEAD(&cell->proc_volumes);
 	seqlock_init(&cell->volume_lock);
@@ -193,6 +193,7 @@ static struct afs_cell *afs_alloc_cell(struct afs_net *net,
 	cell->dns_source = vllist->source;
 	cell->dns_status = vllist->status;
 	smp_store_release(&cell->dns_lookup_count, 1); /* vs source/status */
+	atomic_inc(&net->cells_outstanding);
 
 	_leave(" = %p", cell);
 	return cell;
@@ -275,12 +276,12 @@ struct afs_cell *afs_lookup_cell(struct afs_net *net,
 
 	cell = candidate;
 	candidate = NULL;
+	atomic_set(&cell->active, 2);
 	rb_link_node_rcu(&cell->net_node, parent, pp);
 	rb_insert_color(&cell->net_node, &net->cells);
-	atomic_inc(&net->cells_outstanding);
 	up_write(&net->cells_lock);
 
-	queue_work(afs_wq, &cell->manager);
+	afs_queue_cell(cell);
 
 wait_for_cell:
 	_debug("wait_for_cell");
@@ -305,16 +306,17 @@ struct afs_cell *afs_lookup_cell(struct afs_net *net,
 	if (excl) {
 		ret = -EEXIST;
 	} else {
-		afs_get_cell(cursor);
+		afs_use_cell(cursor);
 		ret = 0;
 	}
 	up_write(&net->cells_lock);
-	kfree(candidate);
+	if (candidate)
+		afs_put_cell(candidate);
 	if (ret == 0)
 		goto wait_for_cell;
 	goto error_noput;
 error:
-	afs_put_cell(net, cell);
+	afs_unuse_cell(net, cell);
 error_noput:
 	_leave(" = %d [error]", ret);
 	return ERR_PTR(ret);
@@ -359,7 +361,7 @@ int afs_cell_init(struct afs_net *net, const char *rootcell)
 	}
 
 	if (!test_and_set_bit(AFS_CELL_FL_NO_GC, &new_root->flags))
-		afs_get_cell(new_root);
+		afs_use_cell(new_root);
 
 	/* install the new cell */
 	down_write(&net->cells_lock);
@@ -367,7 +369,7 @@ int afs_cell_init(struct afs_net *net, const char *rootcell)
 	net->ws_cell = new_root;
 	up_write(&net->cells_lock);
 
-	afs_put_cell(net, old_root);
+	afs_unuse_cell(net, old_root);
 	_leave(" = 0");
 	return 0;
 }
@@ -473,18 +475,21 @@ static int afs_update_cell(struct afs_cell *cell)
 static void afs_cell_destroy(struct rcu_head *rcu)
 {
 	struct afs_cell *cell = container_of(rcu, struct afs_cell, rcu);
+	struct afs_net *net = cell->net;
+	int u;
 
 	_enter("%p{%s}", cell, cell->name);
 
-	ASSERTCMP(atomic_read(&cell->usage), ==, 0);
+	u = atomic_read(&cell->ref);
+	ASSERTCMP(u, ==, 0);
 
-	afs_put_volume(cell->net, cell->root_volume, afs_volume_trace_put_cell_root);
-	afs_put_vlserverlist(cell->net, rcu_access_pointer(cell->vl_servers));
-	afs_put_cell(cell->net, cell->alias_of);
+	afs_put_vlserverlist(net, rcu_access_pointer(cell->vl_servers));
+	afs_unuse_cell(net, cell->alias_of);
 	key_put(cell->anonymous_key);
 	kfree(cell->name);
 	kfree(cell);
 
+	afs_dec_cells_outstanding(net);
 	_leave(" [destroyed]");
 }
 
@@ -519,16 +524,50 @@ void afs_cells_timer(struct timer_list *timer)
  */
 struct afs_cell *afs_get_cell(struct afs_cell *cell)
 {
-	atomic_inc(&cell->usage);
+	if (atomic_read(&cell->ref) <= 0)
+		BUG();
+
+	atomic_inc(&cell->ref);
 	return cell;
 }
 
 /*
  * Drop a reference on a cell record.
  */
-void afs_put_cell(struct afs_net *net, struct afs_cell *cell)
+void afs_put_cell(struct afs_cell *cell)
+{
+	if (cell) {
+		unsigned int u, a;
+
+		u = atomic_dec_return(&cell->ref);
+		if (u == 0) {
+			a = atomic_read(&cell->active);
+			WARN(a != 0, "Cell active count %u > 0\n", a);
+			call_rcu(&cell->rcu, afs_cell_destroy);
+		}
+	}
+}
+
+/*
+ * Note a cell becoming more active.
+ */
+struct afs_cell *afs_use_cell(struct afs_cell *cell)
+{
+	if (atomic_read(&cell->ref) <= 0)
+		BUG();
+
+	atomic_inc(&cell->active);
+	return cell;
+}
+
+/*
+ * Record a cell becoming less active.  When the active counter reaches 1, it
+ * is scheduled for destruction, but may get reactivated.
+ */
+void afs_unuse_cell(struct afs_net *net, struct afs_cell *cell)
 {
 	time64_t now, expire_delay;
+	int a;
 
 	if (!cell)
 		return;
@@ -541,11 +580,21 @@ void afs_put_cell(struct afs_net *net, struct afs_cell *cell)
 	if (cell->vl_servers->nr_servers)
 		expire_delay = afs_cell_gc_delay;
 
-	if (atomic_dec_return(&cell->usage) > 1)
-		return;
+	a = atomic_dec_return(&cell->active);
+	WARN_ON(a == 0);
+	if (a == 1)
+		/* 'cell' may now be garbage collected. */
+		afs_set_cell_timer(net, expire_delay);
+}
 
-	/* 'cell' may now be garbage collected. */
-	afs_set_cell_timer(net, expire_delay);
+/*
+ * Queue a cell for management, giving the workqueue a ref to hold.
+ */
+void afs_queue_cell(struct afs_cell *cell)
+{
+	afs_get_cell(cell);
+	if (!queue_work(afs_wq, &cell->manager))
+		afs_put_cell(cell);
 }
 
 /*
@@ -645,12 +694,11 @@ static void afs_deactivate_cell(struct afs_net *net, struct afs_cell *cell)
  * Manage a cell record, initialising and destroying it, maintaining its DNS
  * records.
  */
-static void afs_manage_cell(struct work_struct *work)
+static void afs_manage_cell(struct afs_cell *cell)
 {
-	struct afs_cell *cell = container_of(work, struct afs_cell, manager);
 	struct afs_net *net = cell->net;
 	bool deleted;
-	int ret, usage;
+	int ret, active;
 
 	_enter("%s", cell->name);
 
@@ -660,10 +708,11 @@ static void afs_manage_cell(struct work_struct *work)
 	case AFS_CELL_INACTIVE:
 	case AFS_CELL_FAILED:
 		down_write(&net->cells_lock);
-		usage = 1;
-		deleted = atomic_try_cmpxchg_relaxed(&cell->usage, &usage, 0);
-		if (deleted)
+		active = 1;
+		deleted = atomic_try_cmpxchg_relaxed(&cell->active, &active, 0);
+		if (deleted) {
 			rb_erase(&cell->net_node, &net->cells);
+		}
 		up_write(&net->cells_lock);
 		if (deleted)
 			goto final_destruction;
@@ -688,7 +737,7 @@ static void afs_manage_cell(struct work_struct *work)
 		goto again;
 
 	case AFS_CELL_ACTIVE:
-		if (atomic_read(&cell->usage) > 1) {
+		if (atomic_read(&cell->active) > 1) {
 			if (test_and_clear_bit(AFS_CELL_FL_DO_LOOKUP, &cell->flags)) {
 				ret = afs_update_cell(cell);
 				if (ret < 0)
@@ -701,7 +750,7 @@ static void afs_manage_cell(struct work_struct *work)
 		goto again;
 
 	case AFS_CELL_DEACTIVATING:
-		if (atomic_read(&cell->usage) > 1)
+		if (atomic_read(&cell->active) > 1)
 			goto reverse_deactivation;
 		afs_deactivate_cell(net, cell);
 		smp_store_release(&cell->state, AFS_CELL_INACTIVE);
@@ -733,9 +782,18 @@ static void afs_manage_cell(struct work_struct *work)
 	return;
 
 final_destruction:
-	call_rcu(&cell->rcu, afs_cell_destroy);
-	afs_dec_cells_outstanding(net);
-	_leave(" [destruct %d]", atomic_read(&net->cells_outstanding));
+	/* The root volume is pinning the cell */
+	afs_put_volume(cell->net, cell->root_volume, afs_volume_trace_put_cell_root);
+	cell->root_volume = NULL;
+	afs_put_cell(cell);
+}
+
+static void afs_manage_cell_work(struct work_struct *work)
+{
+	struct afs_cell *cell = container_of(work, struct afs_cell, manager);
+
+	afs_manage_cell(cell);
+	afs_put_cell(cell);
 }
 
 /*
@@ -769,21 +827,20 @@ void afs_manage_cells(struct work_struct *work)
 	for (cursor = rb_first(&net->cells); cursor; cursor = rb_next(cursor)) {
 		struct afs_cell *cell =
 			rb_entry(cursor, struct afs_cell, net_node);
-		unsigned usage;
+		unsigned active;
 		bool sched_cell = false;
 
-		usage = atomic_read(&cell->usage);
-		_debug("manage %s %u", cell->name, usage);
+		active = atomic_read(&cell->active);
+		_debug("manage %s %u %u", cell->name, atomic_read(&cell->ref), active);
 
-		ASSERTCMP(usage, >=, 1);
+		ASSERTCMP(active, >=, 1);
 
 		if (purging) {
 			if (test_and_clear_bit(AFS_CELL_FL_NO_GC, &cell->flags))
-				usage = atomic_dec_return(&cell->usage);
-			ASSERTCMP(usage, ==, 1);
+				atomic_dec(&cell->active);
 		}
 
-		if (usage == 1) {
+		if (active == 1) {
 			struct afs_vlserver_list *vllist;
 			time64_t expire_at = cell->last_inactive;
 
@@ -806,7 +863,7 @@ void afs_manage_cells(struct work_struct *work)
 		}
 
 		if (sched_cell)
-			queue_work(afs_wq, &cell->manager);
+			afs_queue_cell(cell);
 	}
 
 	up_read(&net->cells_lock);
@@ -843,7 +900,7 @@ void afs_cell_purge(struct afs_net *net)
 	ws = net->ws_cell;
 	net->ws_cell = NULL;
 	up_write(&net->cells_lock);
-	afs_put_cell(net, ws);
+	afs_unuse_cell(net, ws);
 
 	_debug("del timer");
 	if (del_timer_sync(&net->cells_timer))
fs/afs/dynroot.c +1 -1
index 5b8de4fee6cda..da32797dd4257 100644
@@ -125,7 +125,7 @@ static int afs_probe_cell_name(struct dentry *dentry)
 
 	cell = afs_find_cell(net, name, len);
 	if (!IS_ERR(cell)) {
-		afs_put_cell(net, cell);
+		afs_unuse_cell(net, cell);
 		return 0;
 	}
 
fs/afs/internal.h +6 -2
index 257c0f07742fb..0363511290c8d 100644
@@ -363,7 +363,8 @@ struct afs_cell {
 #endif
 	time64_t		dns_expiry;	/* Time AFSDB/SRV record expires */
 	time64_t		last_inactive;	/* Time of last drop of usage count */
-	atomic_t		usage;
+	atomic_t		ref;		/* Struct refcount */
+	atomic_t		active;		/* Active usage counter */
 	unsigned long		flags;
 #define AFS_CELL_FL_NO_GC	0		/* The cell was added manually, don't auto-gc */
 #define AFS_CELL_FL_DO_LOOKUP	1		/* DNS lookup requested */
@@ -920,8 +921,11 @@ extern int afs_cell_init(struct afs_net *, const char *);
 extern struct afs_cell *afs_find_cell(struct afs_net *, const char *, unsigned);
 extern struct afs_cell *afs_lookup_cell(struct afs_net *, const char *, unsigned,
 					const char *, bool);
+extern struct afs_cell *afs_use_cell(struct afs_cell *);
+extern void afs_unuse_cell(struct afs_net *, struct afs_cell *);
 extern struct afs_cell *afs_get_cell(struct afs_cell *);
-extern void afs_put_cell(struct afs_net *, struct afs_cell *);
+extern void afs_put_cell(struct afs_cell *);
+extern void afs_queue_cell(struct afs_cell *);
 extern void afs_manage_cells(struct work_struct *);
 extern void afs_cells_timer(struct timer_list *);
 extern void __net_exit afs_cell_purge(struct afs_net *);
fs/afs/mntpt.c +2 -2
index 79bc5f1338edf..c69a0282960cc 100644
@@ -88,7 +88,7 @@ static int afs_mntpt_set_params(struct fs_context *fc, struct dentry *mntpt)
 		ctx->force = true;
 	}
 	if (ctx->cell) {
-		afs_put_cell(ctx->net, ctx->cell);
+		afs_unuse_cell(ctx->net, ctx->cell);
 		ctx->cell = NULL;
 	}
 	if (test_bit(AFS_VNODE_PSEUDODIR, &vnode->flags)) {
@@ -124,7 +124,7 @@ static int afs_mntpt_set_params(struct fs_context *fc, struct dentry *mntpt)
 		char *buf;
 
 		if (src_as->cell)
-			ctx->cell = afs_get_cell(src_as->cell);
+			ctx->cell = afs_use_cell(src_as->cell);
 
 		if (size < 2 || size > PAGE_SIZE - 1)
 			return -EINVAL;
fs/afs/proc.c +11 -12
index e8babb62ed442..76fbe0560cfb7 100644
@@ -38,7 +38,7 @@ static int afs_proc_cells_show(struct seq_file *m, void *v)
 
 	if (v == SEQ_START_TOKEN) {
 		/* display header on line 1 */
-		seq_puts(m, "USE    TTL SV ST NAME\n");
+		seq_puts(m, "USE ACT    TTL SV ST NAME\n");
 		return 0;
 	}
 
@@ -46,10 +46,11 @@ static int afs_proc_cells_show(struct seq_file *m, void *v)
 	vllist = rcu_dereference(cell->vl_servers);
 
 	/* display one cell per line on subsequent lines */
-	seq_printf(m, "%3u %6lld %2u %2u %s\n",
-		   atomic_read(&cell->usage),
+	seq_printf(m, "%3u %3u %6lld %2u %2u %s\n",
+		   atomic_read(&cell->ref),
+		   atomic_read(&cell->active),
 		   cell->dns_expiry - ktime_get_real_seconds(),
-		   vllist->nr_servers,
+		   vllist ? vllist->nr_servers : 0,
 		   cell->state,
 		   cell->name);
 	return 0;
@@ -128,7 +129,7 @@ static int afs_proc_cells_write(struct file *file, char *buf, size_t size)
 		}
 
 		if (test_and_set_bit(AFS_CELL_FL_NO_GC, &cell->flags))
-			afs_put_cell(net, cell);
+			afs_unuse_cell(net, cell);
 	} else {
 		goto inval;
 	}
@@ -154,13 +155,11 @@ static int afs_proc_rootcell_show(struct seq_file *m, void *v)
 	struct afs_net *net;
 
 	net = afs_seq2net_single(m);
-	if (rcu_access_pointer(net->ws_cell)) {
-		rcu_read_lock();
-		cell = rcu_dereference(net->ws_cell);
-		if (cell)
-			seq_printf(m, "%s\n", cell->name);
-		rcu_read_unlock();
-	}
+	down_read(&net->cells_lock);
+	cell = net->ws_cell;
+	if (cell)
+		seq_printf(m, "%s\n", cell->name);
+	up_read(&net->cells_lock);
 	return 0;
 }
 
fs/afs/super.c +6 -6
index 0be99016ecfb9..e72c223f831d2 100644
@@ -294,7 +294,7 @@ static int afs_parse_source(struct fs_context *fc, struct fs_parameter *param)
 			       cellnamesz, cellnamesz, cellname ?: "");
 			return PTR_ERR(cell);
 		}
-		afs_put_cell(ctx->net, ctx->cell);
+		afs_unuse_cell(ctx->net, ctx->cell);
 		ctx->cell = cell;
 	}
 
@@ -389,8 +389,8 @@ static int afs_validate_fc(struct fs_context *fc)
 				_debug("switch to alias");
 				key_put(ctx->key);
 				ctx->key = NULL;
-				cell = afs_get_cell(ctx->cell->alias_of);
-				afs_put_cell(ctx->net, ctx->cell);
+				cell = afs_use_cell(ctx->cell->alias_of);
+				afs_unuse_cell(ctx->net, ctx->cell);
 				ctx->cell = cell;
 				goto reget_key;
 			}
@@ -508,7 +508,7 @@ static struct afs_super_info *afs_alloc_sbi(struct fs_context *fc)
 		if (ctx->dyn_root) {
 			as->dyn_root = true;
 		} else {
-			as->cell = afs_get_cell(ctx->cell);
+			as->cell = afs_use_cell(ctx->cell);
 			as->volume = afs_get_volume(ctx->volume,
 						    afs_volume_trace_get_alloc_sbi);
 		}
@@ -521,7 +521,7 @@ static void afs_destroy_sbi(struct afs_super_info *as)
 	if (as) {
 		struct afs_net *net = afs_net(as->net_ns);
 		afs_put_volume(net, as->volume, afs_volume_trace_put_destroy_sbi);
-		afs_put_cell(net, as->cell);
+		afs_unuse_cell(net, as->cell);
 		put_net(as->net_ns);
 		kfree(as);
 	}
@@ -607,7 +607,7 @@ static void afs_free_fc(struct fs_context *fc)
 
 	afs_destroy_sbi(fc->s_fs_info);
 	afs_put_volume(ctx->net, ctx->volume, afs_volume_trace_put_free_fc);
-	afs_put_cell(ctx->net, ctx->cell);
+	afs_unuse_cell(ctx->net, ctx->cell);
 	key_put(ctx->key);
 	kfree(ctx);
 }
fs/afs/vl_alias.c +4 -4
index 5082ef04e99c5..ddb4cb67d0fd9 100644
@@ -177,7 +177,7 @@ static int afs_compare_cell_roots(struct afs_cell *cell)
 
 is_alias:
 	rcu_read_unlock();
-	cell->alias_of = afs_get_cell(p);
+	cell->alias_of = afs_use_cell(p);
 	return 1;
 }
 
@@ -247,18 +247,18 @@ static int afs_query_for_alias(struct afs_cell *cell, struct key *key)
 			continue;
 		if (p->root_volume)
 			continue; /* Ignore cells that have a root.cell volume. */
-		afs_get_cell(p);
+		afs_use_cell(p);
 		mutex_unlock(&cell->net->proc_cells_lock);
 
 		if (afs_query_for_alias_one(cell, key, p) != 0)
 			goto is_alias;
 
 		if (mutex_lock_interruptible(&cell->net->proc_cells_lock) < 0) {
-			afs_put_cell(cell->net, p);
+			afs_unuse_cell(cell->net, p);
 			return -ERESTARTSYS;
 		}
 
-		afs_put_cell(cell->net, p);
+		afs_unuse_cell(cell->net, p);
 	}
 
 	mutex_unlock(&cell->net->proc_cells_lock);
fs/afs/vl_rotate.c +1 -1
index c0458c903b310..da3b072d4d638 100644
@@ -45,7 +45,7 @@ static bool afs_start_vl_iteration(struct afs_vl_cursor *vc)
 	    cell->dns_expiry <= ktime_get_real_seconds()) {
 		dns_lookup_count = smp_load_acquire(&cell->dns_lookup_count);
 		set_bit(AFS_CELL_FL_DO_LOOKUP, &cell->flags);
-		queue_work(afs_wq, &cell->manager);
+		afs_queue_cell(cell);
 
 		if (cell->dns_source == DNS_RECORD_UNAVAILABLE) {
 			if (wait_var_event_interruptible(
fs/afs/volume.c +2 -2
index 9bc0509e3634c..a838030e95634 100644
@@ -106,7 +106,7 @@ static struct afs_volume *afs_alloc_volume(struct afs_fs_context *params,
 	return volume;
 
 error_1:
-	afs_put_cell(params->net, volume->cell);
+	afs_put_cell(volume->cell);
 	kfree(volume);
 error_0:
 	return ERR_PTR(ret);
@@ -228,7 +228,7 @@ static void afs_destroy_volume(struct afs_net *net, struct afs_volume *volume)
 
 	afs_remove_volume_from_cell(volume);
 	afs_put_serverlist(net, rcu_access_pointer(volume->servers));
-	afs_put_cell(net, volume->cell);
+	afs_put_cell(volume->cell);
 	trace_afs_volume(volume->vid, atomic_read(&volume->usage),
 			 afs_volume_trace_free);
 	kfree_rcu(volume, rcu);
Signature · 1 line
2.25.1
author maintainer
#504 lore raw

PATCH 504/757 afs: Fix cell purging with aliases

In reply to Greg Kroah-Hartman

From: David Howells <[email protected]>

[ Upstream commit 286377f6bdf71568a4cf07104fe44006ae0dba6d ]

When the afs module is removed, one of the things that has to be done is to purge the cell database. afs_cell_purge() cancels the management timer and then starts the cell manager work item to do the purging. This does a single run through and then assumes that all cells are now purged - but this is no longer the case.

With the introduction of alias detection, a later cell in the database can now be holding an active count on an earlier cell (cell->alias_of). The purge scan passes by the earlier cell first, but this can't be got rid of until it has discarded the alias. Ordinarily, afs_unuse_cell() would handle this by setting the management timer to trigger another pass - but afs_set_cell_timer() doesn't do anything if the namespace is being removed (net->live == false). rmmod then hangs in the wait on cells_outstanding in afs_cell_purge().

Fix this by making afs_set_cell_timer() directly queue the cell manager if net->live is false. This causes additional management passes.

Queueing the cell manager increments cells_outstanding to make sure the wait won't complete until all cells are destroyed.

Fixes 8a070a964877 ("afs: Detect cell aliases 1 - Cells with root volumes")
---
 fs/afs/cell.c | 3 +++
 1 file changed, 3 insertions(+)
fs/afs/cell.c +3 -0
index c906000b0ff84..1944be78e9b0d 100644
@@ -19,6 +19,7 @@ static unsigned __read_mostly afs_cell_gc_delay = 10;
 static unsigned __read_mostly afs_cell_min_ttl = 10 * 60;
 static unsigned __read_mostly afs_cell_max_ttl = 24 * 60 * 60;
 
+static void afs_queue_cell_manager(struct afs_net *);
 static void afs_manage_cell_work(struct work_struct *);
 
 static void afs_dec_cells_outstanding(struct afs_net *net)
@@ -37,6 +38,8 @@ static void afs_set_cell_timer(struct afs_net *net, time64_t delay)
 		atomic_inc(&net->cells_outstanding);
 		if (timer_reduce(&net->cells_timer, jiffies + delay * HZ))
 			afs_dec_cells_outstanding(net);
+	} else {
+		afs_queue_cell_manager(net);
 	}
 }
 
Signature · 1 line
2.25.1
author maintainer
#505 lore raw

PATCH 505/757 afs: Fix cell removal

In reply to Greg Kroah-Hartman

From: David Howells <[email protected]>

[ Upstream commit 1d0e850a49a5b56f8f3cb51e74a11e2fedb96be6 ]

Fix cell removal by inserting a more final state than AFS_CELL_FAILED that indicates that the cell has been unpublished in case the manager is already requeued and will go through again. The new AFS_CELL_REMOVED state will just immediately leave the manager function.

Going through a second time in the AFS_CELL_FAILED state will cause it to try to remove the cell again, potentially leading to the proc list being removed.

Fixes 989782dcdc91 ("afs: Overhaul cell database management")
Reported-by [email protected]
Reported-by [email protected]
Reported-by [email protected]
Reported-by [email protected]
Reported-by [email protected]
Reported-by [email protected]
cc Hillf Danton <[email protected]>
---
 fs/afs/cell.c     | 16 ++++++++++------
 fs/afs/internal.h |  1 +
 2 files changed, 11 insertions(+), 6 deletions(-)
fs/afs/cell.c +10 -6
index 1944be78e9b0d..bc7ed46aaca9f 100644
@@ -291,11 +291,11 @@ struct afs_cell *afs_lookup_cell(struct afs_net *net,
 	wait_var_event(&cell->state,
 		       ({
 			       state = smp_load_acquire(&cell->state); /* vs error */
-			       state == AFS_CELL_ACTIVE || state == AFS_CELL_FAILED;
+			       state == AFS_CELL_ACTIVE || state == AFS_CELL_REMOVED;
 		       }));
 
 	/* Check the state obtained from the wait check. */
-	if (state == AFS_CELL_FAILED) {
+	if (state == AFS_CELL_REMOVED) {
 		ret = cell->error;
 		goto error;
 	}
@@ -700,7 +700,6 @@ static void afs_deactivate_cell(struct afs_net *net, struct afs_cell *cell)
 static void afs_manage_cell(struct afs_cell *cell)
 {
 	struct afs_net *net = cell->net;
-	bool deleted;
 	int ret, active;
 
 	_enter("%s", cell->name);
@@ -712,13 +711,15 @@ static void afs_manage_cell(struct afs_cell *cell)
 	case AFS_CELL_FAILED:
 		down_write(&net->cells_lock);
 		active = 1;
-		deleted = atomic_try_cmpxchg_relaxed(&cell->active, &active, 0);
-		if (deleted) {
+		if (atomic_try_cmpxchg_relaxed(&cell->active, &active, 0)) {
 			rb_erase(&cell->net_node, &net->cells);
+			smp_store_release(&cell->state, AFS_CELL_REMOVED);
 		}
 		up_write(&net->cells_lock);
-		if (deleted)
+		if (cell->state == AFS_CELL_REMOVED) {
+			wake_up_var(&cell->state);
 			goto final_destruction;
+		}
 		if (cell->state == AFS_CELL_FAILED)
 			goto done;
 		smp_store_release(&cell->state, AFS_CELL_UNSET);
@@ -760,6 +761,9 @@ static void afs_manage_cell(struct afs_cell *cell)
 		wake_up_var(&cell->state);
 		goto again;
 
+	case AFS_CELL_REMOVED:
+		goto done;
+
 	default:
 		break;
 	}
fs/afs/internal.h +1 -0
index 0363511290c8d..06e617ee4cd1e 100644
@@ -326,6 +326,7 @@ enum afs_cell_state {
 	AFS_CELL_DEACTIVATING,
 	AFS_CELL_INACTIVE,
 	AFS_CELL_FAILED,
+	AFS_CELL_REMOVED,
 };
 
 /*
Signature · 1 line
2.25.1
author maintainer
#506 lore raw

PATCH 506/757 RDMA/rxe: Handle skb_clone() failure in rxe_recv.c

In reply to Greg Kroah-Hartman

From: Bob Pearson <[email protected]>

[ Upstream commit 71abf20b28ff87fee6951ec2218d5ce7969c4e87 ]

If skb_clone() is unable to allocate memory for a new sk_buff this is not detected by the current code.

Check for a NULL return and continue. This is similar to other errors in this loop over QPs attached to the multicast address and consistent with the unreliable UD transport.

Fixes e7ec96fc7932f ("RDMA/rxe: Fix skb lifetime in rxe_rcv_mcast_pkt()")

Addresses-Coverity-ID: 1497804: Null pointer dereferences (NULL_RETURNS)

---
 drivers/infiniband/sw/rxe/rxe_recv.c | 3 +++
 1 file changed, 3 insertions(+)
drivers/infiniband/sw/rxe/rxe_recv.c +3 -0
index 967ee8e1699cd..2da4187db80c9 100644
@@ -298,6 +298,9 @@ static void rxe_rcv_mcast_pkt(struct rxe_dev *rxe, struct sk_buff *skb)
 		else
 			per_qp_skb = skb;
 
+		if (unlikely(!per_qp_skb))
+			continue;
+
 		per_qp_pkt = SKB_TO_PKT(per_qp_skb);
 		per_qp_pkt->qp = qp;
 		rxe_add_ref(qp);
Signature · 1 line
2.25.1
author maintainer
#507 lore raw

PATCH 507/757 mm/page_owner: change split_page_owner to take a count

In reply to Greg Kroah-Hartman

From: Matthew Wilcox (Oracle) <[email protected]>

[ Upstream commit 8fb156c9ee2db94f7127c930c89917634a1a9f56 ]

The implementation of split_page_owner() prefers a count rather than the old order of the page. When we support a variable size THP, we won't have the order at this point, but we will have the number of pages. So change the interface to what the caller and callee would prefer.

---
 include/linux/page_owner.h | 6 +++---
 mm/huge_memory.c           | 2 +-
 mm/page_alloc.c            | 2 +-
 mm/page_owner.c            | 4 ++--
 4 files changed, 7 insertions(+), 7 deletions(-)
include/linux/page_owner.h +3 -3
index 8679ccd722e89..3468794f83d23 100644
@@ -11,7 +11,7 @@ extern struct page_ext_operations page_owner_ops;
 extern void __reset_page_owner(struct page *page, unsigned int order);
 extern void __set_page_owner(struct page *page,
 			unsigned int order, gfp_t gfp_mask);
-extern void __split_page_owner(struct page *page, unsigned int order);
+extern void __split_page_owner(struct page *page, unsigned int nr);
 extern void __copy_page_owner(struct page *oldpage, struct page *newpage);
 extern void __set_page_owner_migrate_reason(struct page *page, int reason);
 extern void __dump_page_owner(struct page *page);
@@ -31,10 +31,10 @@ static inline void set_page_owner(struct page *page,
 		__set_page_owner(page, order, gfp_mask);
 }
 
-static inline void split_page_owner(struct page *page, unsigned int order)
+static inline void split_page_owner(struct page *page, unsigned int nr)
 {
 	if (static_branch_unlikely(&page_owner_inited))
-		__split_page_owner(page, order);
+		__split_page_owner(page, nr);
 }
 static inline void copy_page_owner(struct page *oldpage, struct page *newpage)
 {
mm/huge_memory.c +1 -1
index da397779a6d43..dbac774103769 100644
@@ -2451,7 +2451,7 @@ static void __split_huge_page(struct page *page, struct list_head *list,
 
 	ClearPageCompound(head);
 
-	split_page_owner(head, HPAGE_PMD_ORDER);
+	split_page_owner(head, HPAGE_PMD_NR);
 
 	/* See comment in __split_huge_page_tail() */
 	if (PageAnon(head)) {
mm/page_alloc.c +1 -1
index d99c2db7f254f..3fb35fe6a9e44 100644
@@ -3209,7 +3209,7 @@ void split_page(struct page *page, unsigned int order)
 
 	for (i = 1; i < (1 << order); i++)
 		set_page_refcounted(page + i);
-	split_page_owner(page, order);
+	split_page_owner(page, 1 << order);
 }
 EXPORT_SYMBOL_GPL(split_page);
 
mm/page_owner.c +2 -2
index 3604615094235..4ca3051a10358 100644
@@ -204,7 +204,7 @@ void __set_page_owner_migrate_reason(struct page *page, int reason)
 	page_owner->last_migrate_reason = reason;
 }
 
-void __split_page_owner(struct page *page, unsigned int order)
+void __split_page_owner(struct page *page, unsigned int nr)
 {
 	int i;
 	struct page_ext *page_ext = lookup_page_ext(page);
@@ -213,7 +213,7 @@ void __split_page_owner(struct page *page, unsigned int order)
 	if (unlikely(!page_ext))
 		return;
 
-	for (i = 0; i < (1 << order); i++) {
+	for (i = 0; i < nr; i++) {
 		page_owner = get_page_owner(page_ext);
 		page_owner->order = 0;
 		page_ext = page_ext_next(page_ext);
Signature · 1 line
2.25.1
author maintainer
#508 lore raw

PATCH 508/757 mm/huge_memory: fix split assumption of page size

In reply to Greg Kroah-Hartman

From: Kirill A. Shutemov <[email protected]>

[ Upstream commit 8cce54756806e5777069c46011c5f54f9feac717 ]

File THPs may now be of arbitrary size, and we can't rely on that size after doing the split so remember the number of pages before we start the split.

---
 mm/huge_memory.c | 15 ++++++++-------
 1 file changed, 8 insertions(+), 7 deletions(-)
mm/huge_memory.c +8 -7
index dbac774103769..d37e205d3eae7 100644
@@ -2335,13 +2335,13 @@ static void unmap_page(struct page *page)
 	VM_BUG_ON_PAGE(!unmap_success, page);
 }
 
-static void remap_page(struct page *page)
+static void remap_page(struct page *page, unsigned int nr)
 {
 	int i;
 	if (PageTransHuge(page)) {
 		remove_migration_ptes(page, page, true);
 	} else {
-		for (i = 0; i < HPAGE_PMD_NR; i++)
+		for (i = 0; i < nr; i++)
 			remove_migration_ptes(page + i, page + i, true);
 	}
 }
@@ -2416,6 +2416,7 @@ static void __split_huge_page(struct page *page, struct list_head *list,
 	struct lruvec *lruvec;
 	struct address_space *swap_cache = NULL;
 	unsigned long offset = 0;
+	unsigned int nr = thp_nr_pages(head);
 	int i;
 
 	lruvec = mem_cgroup_page_lruvec(head, pgdat);
@@ -2431,7 +2432,7 @@ static void __split_huge_page(struct page *page, struct list_head *list,
 		xa_lock(&swap_cache->i_pages);
 	}
 
-	for (i = HPAGE_PMD_NR - 1; i >= 1; i--) {
+	for (i = nr - 1; i >= 1; i--) {
 		__split_huge_page_tail(head, i, lruvec, list);
 		/* Some pages can be beyond i_size: drop them from page cache */
 		if (head[i].index >= end) {
@@ -2451,7 +2452,7 @@ static void __split_huge_page(struct page *page, struct list_head *list,
 
 	ClearPageCompound(head);
 
-	split_page_owner(head, HPAGE_PMD_NR);
+	split_page_owner(head, nr);
 
 	/* See comment in __split_huge_page_tail() */
 	if (PageAnon(head)) {
@@ -2470,9 +2471,9 @@ static void __split_huge_page(struct page *page, struct list_head *list,
 
 	spin_unlock_irqrestore(&pgdat->lru_lock, flags);
 
-	remap_page(head);
+	remap_page(head, nr);
 
-	for (i = 0; i < HPAGE_PMD_NR; i++) {
+	for (i = 0; i < nr; i++) {
 		struct page *subpage = head + i;
 		if (subpage == page)
 			continue;
@@ -2725,7 +2726,7 @@ int split_huge_page_to_list(struct page *page, struct list_head *list)
 fail:		if (mapping)
 			xa_unlock(&mapping->i_pages);
 		spin_unlock_irqrestore(&pgdata->lru_lock, flags);
-		remap_page(head);
+		remap_page(head, thp_nr_pages(head));
 		ret = -EBUSY;
 	}
 
Signature · 1 line
2.25.1
author maintainer
#509 lore raw

PATCH 509/757 mm: fix a race during THP splitting

In reply to Greg Kroah-Hartman

From: Huang Ying <[email protected]>

[ Upstream commit c4f9c701f9b44299e6adbc58d1a4bb2c40383494 ]

It is reported that the following bug is triggered if the HDD is used as swap device,

[ 5758.157556] BUG: kernel NULL pointer dereference, address: 0000000000000007
[ 5758.165331] #PF: supervisor write access in kernel mode
[ 5758.171161] #PF: error_code(0x0002) - not-present page
[ 5758.176894] PGD 0 P4D 0
[ 5758.179721] Oops: 0002 [#1] SMP PTI
[ 5758.183614] CPU: 10 PID: 316 Comm: kswapd1 Kdump: loaded Tainted: G S               --------- ---  5.9.0-0.rc3.1.tst.el8.x86_64 #1
[ 5758.196717] Hardware name: Intel Corporation S2600CP/S2600CP, BIOS SE5C600.86B.02.01.0002.082220131453 08/22/2013
[ 5758.208176] RIP: 0010:split_swap_cluster+0x47/0x60
[ 5758.213522] Code: c1 e3 06 48 c1 eb 0f 48 8d 1c d8 48 89 df e8 d0 20 6a 00 80 63 07 fb 48 85 db 74 16 48 89 df c6 07 00 66 66 66 90 31 c0 5b c3 <80> 24 25 07 00 00 00 fb 31 c0 5b c3 b8 f0 ff ff ff 5b c3 66 0f 1f
[ 5758.234478] RSP: 0018:ffffb147442d7af0 EFLAGS: 00010246
[ 5758.240309] RAX: 0000000000000000 RBX: 000000000014b217 RCX: ffffb14779fd9000
[ 5758.248281] RDX: 000000000014b217 RSI: ffff9c52f2ab1400 RDI: 000000000014b217
[ 5758.256246] RBP: ffffe00c51168080 R08: ffffe00c5116fe08 R09: ffff9c52fffd3000
[ 5758.264208] R10: ffffe00c511537c8 R11: ffff9c52fffd3c90 R12: 0000000000000000
[ 5758.272172] R13: ffffe00c51170000 R14: ffffe00c51170000 R15: ffffe00c51168040
[ 5758.280134] FS:  0000000000000000(0000) GS:ffff9c52f2a80000(0000) knlGS:0000000000000000
[ 5758.289163] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 5758.295575] CR2: 0000000000000007 CR3: 0000000022a0e003 CR4: 00000000000606e0
[ 5758.303538] Call Trace:
[ 5758.306273]  split_huge_page_to_list+0x88b/0x950
[ 5758.311433]  deferred_split_scan+0x1ca/0x310
[ 5758.316202]  do_shrink_slab+0x12c/0x2a0
[ 5758.320491]  shrink_slab+0x20f/0x2c0
[ 5758.324482]  shrink_node+0x240/0x6c0
[ 5758.328469]  balance_pgdat+0x2d1/0x550
[ 5758.332652]  kswapd+0x201/0x3c0
[ 5758.336157]  ? finish_wait+0x80/0x80
[ 5758.340147]  ? balance_pgdat+0x550/0x550
[ 5758.344525]  kthread+0x114/0x130
[ 5758.348126]  ? kthread_park+0x80/0x80
[ 5758.352214]  ret_from_fork+0x22/0x30
[ 5758.356203] Modules linked in: fuse zram rfkill sunrpc intel_rapl_msr intel_rapl_common sb_edac x86_pkg_temp_thermal intel_powerclamp coretemp mgag200 iTCO_wdt crct10dif_pclmul iTCO_vendor_support drm_kms_helper crc32_pclmul ghash_clmulni_intel syscopyarea sysfillrect sysimgblt fb_sys_fops cec rapl joydev intel_cstate ipmi_si ipmi_devintf drm intel_uncore i2c_i801 ipmi_msghandler pcspkr lpc_ich mei_me i2c_smbus mei ioatdma ip_tables xfs libcrc32c sr_mod sd_mod cdrom t10_pi sg igb ahci libahci i2c_algo_bit crc32c_intel libata dca wmi dm_mirror dm_region_hash dm_log dm_mod
[ 5758.412673] CR2: 0000000000000007
[    0.000000] Linux version 5.9.0-0.rc3.1.tst.el8.x86_64 ([email protected]) (gcc (GCC) 8.3.1 20191121 (Red Hat 8.3.1-5), GNU ld version 2.30-79.el8) #1 SMP Wed Sep 9 16:03:34 EDT 2020

After further digging it's found that the following race condition exists in the original implementation,

CPU1 CPU2
---- ----
deferred_split_scan()
split_huge_page(page) /* page isn't compound head */

    split_huge_page_to_list(page, NULL)
      __split_huge_page(page, )
        ClearPageCompound(head)
        /* unlock all subpages except page (not head) */
                                                                 add_to_swap(head)  /* not THP */
                                                                   get_swap_page(head)
                                                                   add_to_swap_cache(head, )
                                                                     SetPageSwapCache(head)
     if PageSwapCache(head)
       split_swap_cluster(/* swap entry of head */)
         /* Deref sis->cluster_info: NULL accessing! */

So, in split_huge_page_to_list(), PageSwapCache() is called for the already split and unlocked "head", which may be added to swap cache in another CPU. So split_swap_cluster() may be called wrongly.

To fix the race, the call to split_swap_cluster() is moved to __split_huge_page() before all subpages are unlocked. So that the PageSwapCache() is stable.

---
 mm/huge_memory.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)
mm/huge_memory.c +7 -6
index d37e205d3eae7..18a6f8c8b2844 100644
@@ -2473,6 +2473,12 @@ static void __split_huge_page(struct page *page, struct list_head *list,
 
 	remap_page(head, nr);
 
+	if (PageSwapCache(head)) {
+		swp_entry_t entry = { .val = page_private(head) };
+
+		split_swap_cluster(entry);
+	}
+
 	for (i = 0; i < nr; i++) {
 		struct page *subpage = head + i;
 		if (subpage == page)
@@ -2707,12 +2713,7 @@ int split_huge_page_to_list(struct page *page, struct list_head *list)
 		}
 
 		__split_huge_page(page, list, end, flags);
-		if (PageSwapCache(head)) {
-			swp_entry_t entry = { .val = page_private(head) };
-
-			ret = split_swap_cluster(entry);
-		} else
-			ret = 0;
+		ret = 0;
 	} else {
 		if (IS_ENABLED(CONFIG_DEBUG_VM) && mapcount) {
 			pr_alert("total_mapcount: %u, page_count(): %u\n",
Signature · 1 line
2.25.1
author maintainer
#510 lore raw

PATCH 510/757 lib/crc32.c: fix trivial typo in preprocessor condition

In reply to Greg Kroah-Hartman

From: Tobias Jordan <[email protected]>

[ Upstream commit 904542dc56524f921a6bab0639ff6249c01e775f ]

Whether crc32_be needs a lookup table is chosen based on CRC_LE_BITS. Obviously, the _be function should be governed by the _BE_ define.

This probably never pops up as it's hard to come up with a configuration where CRC_BE_BITS isn't the same as CRC_LE_BITS and as nobody is using bitwise CRC anyway.

Fixes 46c5801eaf86 ("crc32: bolt on crc32c")
Cc Krzysztof Kozlowski <[email protected]>
Cc Jonathan Corbet <[email protected]>
Cc Mauro Carvalho Chehab <[email protected]>
---
 lib/crc32.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
lib/crc32.c +1 -1
index 35a03d03f9738..2a68dfd3b96c8 100644
@@ -331,7 +331,7 @@ static inline u32 __pure crc32_be_generic(u32 crc, unsigned char const *p,
 	return crc;
 }
 
-#if CRC_LE_BITS == 1
+#if CRC_BE_BITS == 1
 u32 __pure crc32_be(u32 crc, unsigned char const *p, size_t len)
 {
 	return crc32_be_generic(crc, p, len, NULL, CRC32_POLY_BE);
Signature · 1 line
2.25.1
author maintainer
#511 lore raw

PATCH 511/757 ramfs: fix nommu mmap with gaps in the page cache

In reply to Greg Kroah-Hartman

From: Matthew Wilcox (Oracle) <[email protected]>

[ Upstream commit 50b7d85680086126d7bd91dae81d57d4cb1ab6b7 ]

ramfs needs to check that pages are both physically contiguous and contiguous in the file. If the page cache happens to have, eg, page A for index 0 of the file, no page for index 1, and page A+1 for index 2, then an mmap of the first two pages of the file will succeed when it should fail.

Fixes 642fb4d1f1dd ("[PATCH] NOMMU: Provide shared-writable mmap support on ramfs")
Cc David Howells <[email protected]>
---
 fs/ramfs/file-nommu.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
fs/ramfs/file-nommu.c +1 -1
index 4146954549560..355523f4a4bf3 100644
@@ -224,7 +224,7 @@ static unsigned long ramfs_nommu_get_unmapped_area(struct file *file,
 	if (!pages)
 		goto out_free;
 
-	nr = find_get_pages(inode->i_mapping, &pgoff, lpages, pages);
+	nr = find_get_pages_contig(inode->i_mapping, pgoff, lpages, pages);
 	if (nr != lpages)
 		goto out_free_pages; /* leave if some pages were missing */
 
Signature · 1 line
2.25.1
author maintainer
#512 lore raw

PATCH 512/757 rapidio: fix error handling path

In reply to Greg Kroah-Hartman

From: Souptick Joarder <[email protected]>

[ Upstream commit fa63f083b3492b5ed5332b8d7c90b03b5ef24a1d ]

rio_dma_transfer() attempts to clamp the return value of pin_user_pages_fast() to be >= 0. However, the attempt fails because nr_pages is overridden a few lines later, and restored to the undesirable -ERRNO value.

The return value is ultimately stored in nr_pages, which in turn is passed to unpin_user_pages(), which expects nr_pages >= 0, else, disaster.

Fix this by fixing the nesting of the assignment to nr_pages: nr_pages should be clamped to zero if pin_user_pages_fast() returns -ERRNO, or set to the return value of pin_user_pages_fast(), otherwise.

[[email protected]: new changelog]

Fixes e8de370188d09 ("rapidio: add mport char device driver")
Cc Matthew Wilcox <[email protected]>
Cc Matt Porter <[email protected]>
Cc Alexandre Bounine <[email protected]>
Cc Gustavo A. R. Silva <[email protected]>
Cc Madhuparna Bhowmik <[email protected]>
Cc Dan Carpenter <[email protected]>
---
 drivers/rapidio/devices/rio_mport_cdev.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)
drivers/rapidio/devices/rio_mport_cdev.c +7 -6
index a30342942e26f..163b6c72501d6 100644
@@ -871,15 +871,16 @@ rio_dma_transfer(struct file *filp, u32 transfer_mode,
 				rmcd_error("pin_user_pages_fast err=%ld",
 					   pinned);
 				nr_pages = 0;
-			} else
+			} else {
 				rmcd_error("pinned %ld out of %ld pages",
 					   pinned, nr_pages);
+				/*
+				 * Set nr_pages up to mean "how many pages to unpin, in
+				 * the error handler:
+				 */
+				nr_pages = pinned;
+			}
 			ret = -EFAULT;
-			/*
-			 * Set nr_pages up to mean "how many pages to unpin, in
-			 * the error handler:
-			 */
-			nr_pages = pinned;
 			goto err_pg;
 		}
 
Signature · 1 line
2.25.1
author maintainer
#513 lore raw

PATCH 513/757 rapidio: fix the missed put_device() for rio_mport_add_riodev

In reply to Greg Kroah-Hartman

From: Jing Xiangfeng <[email protected]>

[ Upstream commit 85094c05eeb47d195a74a25366a2db066f1c9d47 ]

rio_mport_add_riodev() misses to call put_device() when the device already exists. Add the missed function call to fix it.

Fixes e8de370188d0 ("rapidio: add mport char device driver")
Cc Matt Porter <[email protected]>
Cc Alexandre Bounine <[email protected]>
Cc Gustavo A. R. Silva <[email protected]>
Cc John Hubbard <[email protected]>
Cc Kees Cook <[email protected]>
Cc Madhuparna Bhowmik <[email protected]>
---
 drivers/rapidio/devices/rio_mport_cdev.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
drivers/rapidio/devices/rio_mport_cdev.c +4 -1
index 163b6c72501d6..94331d999d273 100644
@@ -1680,6 +1680,7 @@ static int rio_mport_add_riodev(struct mport_cdev_priv *priv,
 	struct rio_dev *rdev;
 	struct rio_switch *rswitch = NULL;
 	struct rio_mport *mport;
+	struct device *dev;
 	size_t size;
 	u32 rval;
 	u32 swpinfo = 0;
@@ -1694,8 +1695,10 @@ static int rio_mport_add_riodev(struct mport_cdev_priv *priv,
 	rmcd_debug(RDEV, "name:%s ct:0x%x did:0x%x hc:0x%x", dev_info.name,
 		   dev_info.comptag, dev_info.destid, dev_info.hopcount);
 
-	if (bus_find_device_by_name(&rio_bus_type, NULL, dev_info.name)) {
+	dev = bus_find_device_by_name(&rio_bus_type, NULL, dev_info.name);
+	if (dev) {
 		rmcd_debug(RDEV, "device %s already exists", dev_info.name);
+		put_device(dev);
 		return -EEXIST;
 	}
 
Signature · 1 line
2.25.1
author maintainer
#514 lore raw

PATCH 514/757 mailbox: avoid timer start from callback

In reply to Greg Kroah-Hartman

From: Jassi Brar <[email protected]>

[ Upstream commit c7dacf5b0f32957b24ef29df1207dc2cd8307743 ]

If the txdone is done by polling, it is possible for msg_submit() to start the timer while txdone_hrtimer() callback is running. If the timer needs recheduling, it could already be enqueued by the time hrtimer_forward_now() is called, leading hrtimer to loudly complain.

WARNING: CPU: 3 PID: 74 at kernel/time/hrtimer.c:932 hrtimer_forward+0xc4/0x110
CPU: 3 PID: 74 Comm: kworker/u8:1 Not tainted 5.9.0-rc2-00236-gd3520067d01c-dirty #5
Hardware name: Libre Computer AML-S805X-AC (DT)
Workqueue: events_freezable_power_ thermal_zone_device_check
pstate: 20000085 (nzCv daIf -PAN -UAO BTYPE=--)
pc : hrtimer_forward+0xc4/0x110
lr : txdone_hrtimer+0xf8/0x118

[...]

This can be fixed by not starting the timer from the callback path. Which requires the timer reloading as long as any message is queued on the channel, and not just when current tx is not done yet.

Fixes 0cc67945ea59 ("mailbox: switch to hrtimer for tx_complete polling")
---
 drivers/mailbox/mailbox.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)
drivers/mailbox/mailbox.c +7 -5
index 0b821a5b2db84..3e7d4b20ab34f 100644
@@ -82,9 +82,12 @@ static void msg_submit(struct mbox_chan *chan)
 exit:
 	spin_unlock_irqrestore(&chan->lock, flags);
 
-	if (!err && (chan->txdone_method & TXDONE_BY_POLL))
-		/* kick start the timer immediately to avoid delays */
-		hrtimer_start(&chan->mbox->poll_hrt, 0, HRTIMER_MODE_REL);
+	/* kick start the timer immediately to avoid delays */
+	if (!err && (chan->txdone_method & TXDONE_BY_POLL)) {
+		/* but only if not already active */
+		if (!hrtimer_active(&chan->mbox->poll_hrt))
+			hrtimer_start(&chan->mbox->poll_hrt, 0, HRTIMER_MODE_REL);
+	}
 }
 
 static void tx_tick(struct mbox_chan *chan, int r)
@@ -122,11 +125,10 @@ static enum hrtimer_restart txdone_hrtimer(struct hrtimer *hrtimer)
 		struct mbox_chan *chan = &mbox->chans[i];
 
 		if (chan->active_req && chan->cl) {
+			resched = true;
 			txdone = chan->mbox->ops->last_tx_done(chan);
 			if (txdone)
 				tx_tick(chan, 0);
-			else
-				resched = true;
 		}
 	}
 
Signature · 1 line
2.25.1
author maintainer
#515 lore raw

PATCH 515/757 clk: meson: axg-audio: separate axg and g12a regmap tables

In reply to Greg Kroah-Hartman

From: Jerome Brunet <[email protected]>

[ Upstream commit cdabb1ffc7c2349b8930f752df1edcafc1d37cc1 ]

There are more differences than what we initially thought. Let's keeps things clear and separate the axg and g12a regmap tables of the audio clock controller.

---
 drivers/clk/meson/axg-audio.c | 135 ++++++++++++++++++++++++++++++++--
 1 file changed, 127 insertions(+), 8 deletions(-)
drivers/clk/meson/axg-audio.c +127 -8
index 53715e36326c6..9918cb375de30 100644
@@ -1209,13 +1209,132 @@ static struct clk_hw_onecell_data sm1_audio_hw_onecell_data = {
 };
 
 
-/* Convenience table to populate regmap in .probe()
- * Note that this table is shared between both AXG and G12A,
- * with spdifout_b clocks being exclusive to G12A. Since those
- * clocks are not declared within the AXG onecell table, we do not
- * feel the need to have separate AXG/G12A regmap tables.
- */
+/* Convenience table to populate regmap in .probe(). */
 static struct clk_regmap *const axg_clk_regmaps[] = {
+	&ddr_arb,
+	&pdm,
+	&tdmin_a,
+	&tdmin_b,
+	&tdmin_c,
+	&tdmin_lb,
+	&tdmout_a,
+	&tdmout_b,
+	&tdmout_c,
+	&frddr_a,
+	&frddr_b,
+	&frddr_c,
+	&toddr_a,
+	&toddr_b,
+	&toddr_c,
+	&loopback,
+	&spdifin,
+	&spdifout,
+	&resample,
+	&power_detect,
+	&mst_a_mclk_sel,
+	&mst_b_mclk_sel,
+	&mst_c_mclk_sel,
+	&mst_d_mclk_sel,
+	&mst_e_mclk_sel,
+	&mst_f_mclk_sel,
+	&mst_a_mclk_div,
+	&mst_b_mclk_div,
+	&mst_c_mclk_div,
+	&mst_d_mclk_div,
+	&mst_e_mclk_div,
+	&mst_f_mclk_div,
+	&mst_a_mclk,
+	&mst_b_mclk,
+	&mst_c_mclk,
+	&mst_d_mclk,
+	&mst_e_mclk,
+	&mst_f_mclk,
+	&spdifout_clk_sel,
+	&spdifout_clk_div,
+	&spdifout_clk,
+	&spdifin_clk_sel,
+	&spdifin_clk_div,
+	&spdifin_clk,
+	&pdm_dclk_sel,
+	&pdm_dclk_div,
+	&pdm_dclk,
+	&pdm_sysclk_sel,
+	&pdm_sysclk_div,
+	&pdm_sysclk,
+	&mst_a_sclk_pre_en,
+	&mst_b_sclk_pre_en,
+	&mst_c_sclk_pre_en,
+	&mst_d_sclk_pre_en,
+	&mst_e_sclk_pre_en,
+	&mst_f_sclk_pre_en,
+	&mst_a_sclk_div,
+	&mst_b_sclk_div,
+	&mst_c_sclk_div,
+	&mst_d_sclk_div,
+	&mst_e_sclk_div,
+	&mst_f_sclk_div,
+	&mst_a_sclk_post_en,
+	&mst_b_sclk_post_en,
+	&mst_c_sclk_post_en,
+	&mst_d_sclk_post_en,
+	&mst_e_sclk_post_en,
+	&mst_f_sclk_post_en,
+	&mst_a_sclk,
+	&mst_b_sclk,
+	&mst_c_sclk,
+	&mst_d_sclk,
+	&mst_e_sclk,
+	&mst_f_sclk,
+	&mst_a_lrclk_div,
+	&mst_b_lrclk_div,
+	&mst_c_lrclk_div,
+	&mst_d_lrclk_div,
+	&mst_e_lrclk_div,
+	&mst_f_lrclk_div,
+	&mst_a_lrclk,
+	&mst_b_lrclk,
+	&mst_c_lrclk,
+	&mst_d_lrclk,
+	&mst_e_lrclk,
+	&mst_f_lrclk,
+	&tdmin_a_sclk_sel,
+	&tdmin_b_sclk_sel,
+	&tdmin_c_sclk_sel,
+	&tdmin_lb_sclk_sel,
+	&tdmout_a_sclk_sel,
+	&tdmout_b_sclk_sel,
+	&tdmout_c_sclk_sel,
+	&tdmin_a_sclk_pre_en,
+	&tdmin_b_sclk_pre_en,
+	&tdmin_c_sclk_pre_en,
+	&tdmin_lb_sclk_pre_en,
+	&tdmout_a_sclk_pre_en,
+	&tdmout_b_sclk_pre_en,
+	&tdmout_c_sclk_pre_en,
+	&tdmin_a_sclk_post_en,
+	&tdmin_b_sclk_post_en,
+	&tdmin_c_sclk_post_en,
+	&tdmin_lb_sclk_post_en,
+	&tdmout_a_sclk_post_en,
+	&tdmout_b_sclk_post_en,
+	&tdmout_c_sclk_post_en,
+	&tdmin_a_sclk,
+	&tdmin_b_sclk,
+	&tdmin_c_sclk,
+	&tdmin_lb_sclk,
+	&tdmout_a_sclk,
+	&tdmout_b_sclk,
+	&tdmout_c_sclk,
+	&tdmin_a_lrclk,
+	&tdmin_b_lrclk,
+	&tdmin_c_lrclk,
+	&tdmin_lb_lrclk,
+	&tdmout_a_lrclk,
+	&tdmout_b_lrclk,
+	&tdmout_c_lrclk,
+};
+
+static struct clk_regmap *const g12a_clk_regmaps[] = {
 	&ddr_arb,
 	&pdm,
 	&tdmin_a,
@@ -1713,8 +1832,8 @@ static const struct audioclk_data axg_audioclk_data = {
 };
 
 static const struct audioclk_data g12a_audioclk_data = {
-	.regmap_clks = axg_clk_regmaps,
-	.regmap_clk_num = ARRAY_SIZE(axg_clk_regmaps),
+	.regmap_clks = g12a_clk_regmaps,
+	.regmap_clk_num = ARRAY_SIZE(g12a_clk_regmaps),
 	.hw_onecell_data = &g12a_audio_hw_onecell_data,
 	.reset_offset = AUDIO_SW_RESET,
 	.reset_num = 26,
Signature · 1 line
2.25.1
author maintainer
#516 lore raw

PATCH 516/757 rtc: ds1307: Clear OSF flag on DS1388 when setting time

In reply to Greg Kroah-Hartman

From: Chris Packham <[email protected]>

[ Upstream commit f471b05f76e4b1b6ba07ebc7681920a5c5b97c5d ]

Ensure the OSF flag is cleared on the DS1388 when the clock is set.

Fixes df11b323b16f ("rtc: ds1307: handle oscillator failure flags for ds1388 variant")
---
 drivers/rtc/rtc-ds1307.c | 4 ++++
 1 file changed, 4 insertions(+)
drivers/rtc/rtc-ds1307.c +4 -0
index 54c85cdd019dd..c9c3de14bc62f 100644
@@ -352,6 +352,10 @@ static int ds1307_set_time(struct device *dev, struct rtc_time *t)
 		regmap_update_bits(ds1307->regmap, DS1340_REG_FLAG,
 				   DS1340_BIT_OSF, 0);
 		break;
+	case ds_1388:
+		regmap_update_bits(ds1307->regmap, DS1388_REG_FLAG,
+				   DS1388_BIT_OSF, 0);
+		break;
 	case mcp794xx:
 		/*
 		 * these bits were cleared when preparing the date/time
Signature · 1 line
2.25.1
author maintainer
#517 lore raw

PATCH 517/757 i2c: rcar: Auto select RESET_CONTROLLER

In reply to Greg Kroah-Hartman

From: Dirk Behme <[email protected]>

[ Upstream commit 5b9bacf28a973a6b16510493416baeefa2c06289 ]

The i2c-rcar driver utilizes the Generic Reset Controller kernel feature, so select the RESET_CONTROLLER option when the I2C_RCAR option is selected with a Gen3 SoC.

Fixes 2b16fd63059ab9 ("i2c: rcar: handle RXDMA HW behaviour on Gen3")
[erosca: Add "if ARCH_RCAR_GEN3" per Wolfram's request]
---
 drivers/i2c/busses/Kconfig | 1 +
 1 file changed, 1 insertion(+)
drivers/i2c/busses/Kconfig +1 -0
index 293e7a0760e77..7ccbfbcb02e9a 100644
@@ -1181,6 +1181,7 @@ config I2C_RCAR
 	tristate "Renesas R-Car I2C Controller"
 	depends on ARCH_RENESAS || COMPILE_TEST
 	select I2C_SLAVE
+	select RESET_CONTROLLER if ARCH_RCAR_GEN3
 	help
 	  If you say yes to this option, support will be included for the
 	  R-Car I2C controller.
Signature · 1 line
2.25.1
author maintainer
#518 lore raw

PATCH 518/757 clk: meson: g12a: mark fclk_div2 as critical

In reply to Greg Kroah-Hartman

From: Stefan Agner <[email protected]>

[ Upstream commit 2c4e80e06790cb49ad2603855d30c5aac2209c47 ]

On Amlogic Meson G12b platform, similar to fclk_div3, the fclk_div2 seems to be necessary for the system to operate correctly as well.

Typically, the clock also gets chosen by the eMMC peripheral. This probably masked the problem so far. However, when booting from a SD card the clock seems to get disabled which leads to a system freeze.

Let's mark this clock as critical, fixing boot from SD card on G12b platforms.

---
 drivers/clk/meson/g12a.c | 11 +++++++++++
 1 file changed, 11 insertions(+)
drivers/clk/meson/g12a.c +11 -0
index 9803d44bb1578..b814d44917a5d 100644
@@ -298,6 +298,17 @@ static struct clk_regmap g12a_fclk_div2 = {
 			&g12a_fclk_div2_div.hw
 		},
 		.num_parents = 1,
+		/*
+		 * Similar to fclk_div3, it seems that this clock is used by
+		 * the resident firmware and is required by the platform to
+		 * operate correctly.
+		 * Until the following condition are met, we need this clock to
+		 * be marked as critical:
+		 * a) Mark the clock used by a firmware resource, if possible
+		 * b) CCF has a clock hand-off mechanism to make the sure the
+		 *    clock stays on until the proper driver comes along
+		 */
+		.flags = CLK_IS_CRITICAL,
 	},
 };
 
Signature · 1 line
2.25.1
author maintainer
#519 lore raw

PATCH 519/757 PCI: designware-ep: Fix the Header Type check

In reply to Greg Kroah-Hartman

From: Hou Zhiqiang <[email protected]>

[ Upstream commit 16270a92355722e387e9ca19627c5a4d7bae1354 ]

The current check will result in the multiple function device fails to initialize. So fix the check by masking out the multiple function bit.

Fixes 0b24134f7888 ("PCI: dwc: Add validation that PCIe core is set to correct mode")
---
 drivers/pci/controller/dwc/pcie-designware-ep.c | 3 ++-
 include/uapi/linux/pci_regs.h                   | 1 +
 2 files changed, 3 insertions(+), 1 deletion(-)
drivers/pci/controller/dwc/pcie-designware-ep.c +2 -1
index 305bfec2424d8..29f5c616c3bc6 100644
@@ -505,7 +505,8 @@ int dw_pcie_ep_init_complete(struct dw_pcie_ep *ep)
 	u32 reg;
 	int i;
 
-	hdr_type = dw_pcie_readb_dbi(pci, PCI_HEADER_TYPE);
+	hdr_type = dw_pcie_readb_dbi(pci, PCI_HEADER_TYPE) &
+		   PCI_HEADER_TYPE_MASK;
 	if (hdr_type != PCI_HEADER_TYPE_NORMAL) {
 		dev_err(pci->dev,
 			"PCIe controller is not set to EP mode (hdr_type:0x%x)!\n",
include/uapi/linux/pci_regs.h +1 -0
index f9701410d3b52..57a222014cd20 100644
@@ -76,6 +76,7 @@
 #define PCI_CACHE_LINE_SIZE	0x0c	/* 8 bits */
 #define PCI_LATENCY_TIMER	0x0d	/* 8 bits */
 #define PCI_HEADER_TYPE		0x0e	/* 8 bits */
+#define  PCI_HEADER_TYPE_MASK		0x7f
 #define  PCI_HEADER_TYPE_NORMAL		0
 #define  PCI_HEADER_TYPE_BRIDGE		1
 #define  PCI_HEADER_TYPE_CARDBUS	2
Signature · 1 line
2.25.1
author maintainer
#520 lore raw

PATCH 520/757 PCI: aardvark: Fix compilation on s390

In reply to Greg Kroah-Hartman

From: Pali Rohár <[email protected]>

[ Upstream commit b32c012e4b98f0126aa327be2d1f409963057643 ]

Include linux/gpio/consumer.h instead of linux/gpio.h, as is said in the latter file.

This was reported by kernel test bot when compiling for s390.

drivers/pci/controller/pci-aardvark.c:350:2: error: implicit declaration of function 'gpiod_set_value_cansleep' [-Werror,-Wimplicit-function-declaration] drivers/pci/controller/pci-aardvark.c:1074:21: error: implicit declaration of function 'devm_gpiod_get_from_of_node' [-Werror,-Wimplicit-function-declaration] drivers/pci/controller/pci-aardvark.c:1076:14: error: use of undeclared identifier 'GPIOD_OUT_LOW'

---
 drivers/pci/controller/pci-aardvark.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/pci/controller/pci-aardvark.c +1 -1
index 1559f79e63b6f..1c5f2fd47c511 100644
@@ -9,7 +9,7 @@
  */
 
 #include <linux/delay.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/irqdomain.h>
Signature · 1 line
2.25.1
author maintainer
#521 lore raw

PATCH 521/757 PCI: aardvark: Check for errors from pci_bridge_emul_init() call

In reply to Greg Kroah-Hartman

From: Pali Rohár <[email protected]>

[ Upstream commit 7862a6134456c8b4f8c39e8c94aa97e5c2f7f2b7 ]

Function pci_bridge_emul_init() may fail so correctly check for errors.

Fixes 8a3ebd8de328 ("PCI: aardvark: Implement emulated root PCI bridge config space")
---
 drivers/pci/controller/pci-aardvark.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)
drivers/pci/controller/pci-aardvark.c +7 -4
index 1c5f2fd47c511..2e2e2a2ff51d3 100644
@@ -607,7 +607,7 @@ static struct pci_bridge_emul_ops advk_pci_bridge_emul_ops = {
  * Initialize the configuration space of the PCI-to-PCI bridge
  * associated with the given PCIe interface.
  */
-static void advk_sw_pci_bridge_init(struct advk_pcie *pcie)
+static int advk_sw_pci_bridge_init(struct advk_pcie *pcie)
 {
 	struct pci_bridge_emul *bridge = &pcie->bridge;
 
@@ -633,8 +633,7 @@ static void advk_sw_pci_bridge_init(struct advk_pcie *pcie)
 	bridge->data = pcie;
 	bridge->ops = &advk_pci_bridge_emul_ops;
 
-	pci_bridge_emul_init(bridge, 0);
-
+	return pci_bridge_emul_init(bridge, 0);
 }
 
 static bool advk_pcie_valid_device(struct advk_pcie *pcie, struct pci_bus *bus,
@@ -1167,7 +1166,11 @@ static int advk_pcie_probe(struct platform_device *pdev)
 
 	advk_pcie_setup_hw(pcie);
 
-	advk_sw_pci_bridge_init(pcie);
+	ret = advk_sw_pci_bridge_init(pcie);
+	if (ret) {
+		dev_err(dev, "Failed to register emulated root PCI bridge\n");
+		return ret;
+	}
 
 	ret = advk_pcie_init_irq_domain(pcie);
 	if (ret) {
Signature · 1 line
2.25.1
author maintainer
#522 lore raw

PATCH 522/757 PCI: iproc: Set affinity mask on MSI interrupts

In reply to Greg Kroah-Hartman

From: Mark Tomlinson <[email protected]>

[ Upstream commit eb7eacaa5b9e4f665bd08d416c8f88e63d2f123c ]

The core interrupt code expects the irq_set_affinity call to update the effective affinity for the interrupt. This was not being done, so update iproc_msi_irq_set_affinity() to do so.

---
 drivers/pci/controller/pcie-iproc-msi.c | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)
drivers/pci/controller/pcie-iproc-msi.c +9 -4
index 3176ad3ab0e52..908475d27e0e7 100644
@@ -209,15 +209,20 @@ static int iproc_msi_irq_set_affinity(struct irq_data *data,
 	struct iproc_msi *msi = irq_data_get_irq_chip_data(data);
 	int target_cpu = cpumask_first(mask);
 	int curr_cpu;
+	int ret;
 
 	curr_cpu = hwirq_to_cpu(msi, data->hwirq);
 	if (curr_cpu == target_cpu)
-		return IRQ_SET_MASK_OK_DONE;
+		ret = IRQ_SET_MASK_OK_DONE;
+	else {
+		/* steer MSI to the target CPU */
+		data->hwirq = hwirq_to_canonical_hwirq(msi, data->hwirq) + target_cpu;
+		ret = IRQ_SET_MASK_OK;
+	}
 
-	/* steer MSI to the target CPU */
-	data->hwirq = hwirq_to_canonical_hwirq(msi, data->hwirq) + target_cpu;
+	irq_data_update_effective_affinity(data, cpumask_of(target_cpu));
 
-	return IRQ_SET_MASK_OK;
+	return ret;
 }
 
 static void iproc_msi_irq_compose_msi_msg(struct irq_data *data,
Signature · 1 line
2.25.1
author maintainer
#523 lore raw

PATCH 523/757 rpmsg: smd: Fix a kobj leak in in qcom_smd_parse_edge()

In reply to Greg Kroah-Hartman

From: Dan Carpenter <[email protected]>

[ Upstream commit e69ee0cf655e8e0c4a80f4319e36019b74f17639 ]

We need to call of_node_put(node) on the error paths for this function.

---
 drivers/rpmsg/qcom_smd.c | 32 ++++++++++++++++++++++----------
 1 file changed, 22 insertions(+), 10 deletions(-)
drivers/rpmsg/qcom_smd.c +22 -10
index 4abbeea782fa4..19903de6268db 100644
@@ -1338,7 +1338,7 @@ static int qcom_smd_parse_edge(struct device *dev,
 	ret = of_property_read_u32(node, key, &edge->edge_id);
 	if (ret) {
 		dev_err(dev, "edge missing %s property\n", key);
-		return -EINVAL;
+		goto put_node;
 	}
 
 	edge->remote_pid = QCOM_SMEM_HOST_ANY;
@@ -1349,32 +1349,37 @@ static int qcom_smd_parse_edge(struct device *dev,
 	edge->mbox_client.knows_txdone = true;
 	edge->mbox_chan = mbox_request_channel(&edge->mbox_client, 0);
 	if (IS_ERR(edge->mbox_chan)) {
-		if (PTR_ERR(edge->mbox_chan) != -ENODEV)
-			return PTR_ERR(edge->mbox_chan);
+		if (PTR_ERR(edge->mbox_chan) != -ENODEV) {
+			ret = PTR_ERR(edge->mbox_chan);
+			goto put_node;
+		}
 
 		edge->mbox_chan = NULL;
 
 		syscon_np = of_parse_phandle(node, "qcom,ipc", 0);
 		if (!syscon_np) {
 			dev_err(dev, "no qcom,ipc node\n");
-			return -ENODEV;
+			ret = -ENODEV;
+			goto put_node;
 		}
 
 		edge->ipc_regmap = syscon_node_to_regmap(syscon_np);
-		if (IS_ERR(edge->ipc_regmap))
-			return PTR_ERR(edge->ipc_regmap);
+		if (IS_ERR(edge->ipc_regmap)) {
+			ret = PTR_ERR(edge->ipc_regmap);
+			goto put_node;
+		}
 
 		key = "qcom,ipc";
 		ret = of_property_read_u32_index(node, key, 1, &edge->ipc_offset);
 		if (ret < 0) {
 			dev_err(dev, "no offset in %s\n", key);
-			return -EINVAL;
+			goto put_node;
 		}
 
 		ret = of_property_read_u32_index(node, key, 2, &edge->ipc_bit);
 		if (ret < 0) {
 			dev_err(dev, "no bit in %s\n", key);
-			return -EINVAL;
+			goto put_node;
 		}
 	}
 
@@ -1385,7 +1390,8 @@ static int qcom_smd_parse_edge(struct device *dev,
 	irq = irq_of_parse_and_map(node, 0);
 	if (irq < 0) {
 		dev_err(dev, "required smd interrupt missing\n");
-		return -EINVAL;
+		ret = irq;
+		goto put_node;
 	}
 
 	ret = devm_request_irq(dev, irq,
@@ -1393,12 +1399,18 @@ static int qcom_smd_parse_edge(struct device *dev,
 			       node->name, edge);
 	if (ret) {
 		dev_err(dev, "failed to request smd irq\n");
-		return ret;
+		goto put_node;
 	}
 
 	edge->irq = irq;
 
 	return 0;
+
+put_node:
+	of_node_put(node);
+	edge->of_node = NULL;
+
+	return ret;
 }
 
 /*
Signature · 1 line
2.25.1
author maintainer
#524 lore raw

PATCH 524/757 rpmsg: Avoid double-free in mtk_rpmsg_register_device

In reply to Greg Kroah-Hartman

From: Nicolas Boichat <[email protected]>

[ Upstream commit 231331b2dbd71487159a0400d9ffd967eb0d0e08 ]

If rpmsg_register_device fails, it will call mtk_rpmsg_release_device which already frees mdev.

---
 drivers/rpmsg/mtk_rpmsg.c | 9 +--------
 1 file changed, 1 insertion(+), 8 deletions(-)
drivers/rpmsg/mtk_rpmsg.c +1 -8
index 83f2b8804ee98..96a17ec291401 100644
@@ -200,7 +200,6 @@ static int mtk_rpmsg_register_device(struct mtk_rpmsg_rproc_subdev *mtk_subdev,
 	struct rpmsg_device *rpdev;
 	struct mtk_rpmsg_device *mdev;
 	struct platform_device *pdev = mtk_subdev->pdev;
-	int ret;
 
 	mdev = kzalloc(sizeof(*mdev), GFP_KERNEL);
 	if (!mdev)
@@ -219,13 +218,7 @@ static int mtk_rpmsg_register_device(struct mtk_rpmsg_rproc_subdev *mtk_subdev,
 	rpdev->dev.parent = &pdev->dev;
 	rpdev->dev.release = mtk_rpmsg_release_device;
 
-	ret = rpmsg_register_device(rpdev);
-	if (ret) {
-		kfree(mdev);
-		return ret;
-	}
-
-	return 0;
+	return rpmsg_register_device(rpdev);
 }
 
 static void mtk_register_device_work_function(struct work_struct *register_work)
Signature · 1 line
2.25.1
author maintainer
#525 lore raw

PATCH 525/757 remoteproc: stm32: Fix pointer assignement

In reply to Greg Kroah-Hartman

From: Mathieu Poirier <[email protected]>

[ Upstream commit cb2d8d5b196c2e96e29343383c8c8d8db68b934e ]

Fix the assignment of the @state pointer - it is obviously wrong.

Fixes 376ffdc04456 ("remoteproc: stm32: Properly set co-processor state when attaching")
---
 drivers/remoteproc/stm32_rproc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/remoteproc/stm32_rproc.c +1 -1
index f4da42fc0eeb1..d2414cc1d90d6 100644
@@ -685,7 +685,7 @@ static int stm32_rproc_get_m4_status(struct stm32_rproc *ddata,
 		 * We couldn't get the coprocessor's state, assume
 		 * it is not running.
 		 */
-		state = M4_STATE_OFF;
+		*state = M4_STATE_OFF;
 		return 0;
 	}
 
Signature · 1 line
2.25.1
author maintainer
#526 lore raw

PATCH 526/757 PCI/IOV: Mark VFs as not implementing PCI_COMMAND_MEMORY

In reply to Greg Kroah-Hartman

From: Matthew Rosato <[email protected]>

[ Upstream commit 12856e7acde4702b7c3238c15fcba86ff6aa507f ]

For VFs, the Memory Space Enable bit in the Command Register is hard-wired to 0.

Add a new bit to signify devices where the Command Register Memory Space Enable bit does not control the device's response to MMIO accesses.

Fixes abafbc551fdd ("vfio-pci: Invalidate mmaps and block MMIO access on disabled memory")
---
 drivers/pci/iov.c   | 1 +
 include/linux/pci.h | 1 +
 2 files changed, 2 insertions(+)
drivers/pci/iov.c +1 -0
index b37e08c4f9d1a..4afd4ee4f7f04 100644
@@ -180,6 +180,7 @@ int pci_iov_add_virtfn(struct pci_dev *dev, int id)
 	virtfn->device = iov->vf_device;
 	virtfn->is_virtfn = 1;
 	virtfn->physfn = pci_dev_get(dev);
+	virtfn->no_command_memory = 1;
 
 	if (id == 0)
 		pci_read_vf_config_common(virtfn);
include/linux/pci.h +1 -0
index 835530605c0d7..3ff723124ca7f 100644
@@ -445,6 +445,7 @@ struct pci_dev {
 	unsigned int	is_probed:1;		/* Device probing in progress */
 	unsigned int	link_active_reporting:1;/* Device capable of reporting link active */
 	unsigned int	no_vf_scan:1;		/* Don't scan for VFs after IOV enablement */
+	unsigned int	no_command_memory:1;	/* No PCI_COMMAND_MEMORY */
 	pci_dev_flags_t dev_flags;
 	atomic_t	enable_cnt;	/* pci_enable_device has been called */
 
Signature · 1 line
2.25.1
author maintainer
#527 lore raw

PATCH 527/757 vfio: add a singleton check for vfio_group_pin_pages

In reply to Greg Kroah-Hartman

From: Yan Zhao <[email protected]>

[ Upstream commit 7ef32e52368f62a4e041a4f0abefb4fb64e7fd4a ]

Page pinning is used both to translate and pin device mappings for DMA purpose, as well as to indicate to the IOMMU backend to limit the dirty page scope to those pages that have been pinned, in the case of an IOMMU backed device.
To support this, the vfio_pin_pages() interface limits itself to only singleton groups such that the IOMMU backend can consider dirty page scope only at the group level. Implement the same requirement for the vfio_group_pin_pages() interface.

Fixes 95fc87b44104 ("vfio: Selective dirty page tracking if IOMMU backed device pins pages")
---
 drivers/vfio/vfio.c | 3 +++
 1 file changed, 3 insertions(+)
drivers/vfio/vfio.c +3 -0
index 262ab0efd06c6..532bcaf28c11d 100644
@@ -2051,6 +2051,9 @@ int vfio_group_pin_pages(struct vfio_group *group,
 	if (!group || !user_iova_pfn || !phys_pfn || !npage)
 		return -EINVAL;
 
+	if (group->dev_counter > 1)
+		return -EINVAL;
+
 	if (npage > VFIO_PIN_PAGES_MAX_ENTRIES)
 		return -E2BIG;
 
Signature · 1 line
2.25.1
author maintainer
#528 lore raw

PATCH 528/757 s390/pci: Mark all VFs as not implementing PCI_COMMAND_MEMORY

In reply to Greg Kroah-Hartman

From: Matthew Rosato <[email protected]>

[ Upstream commit 08b6e22b850c28b6032da1e4d767a33116e23dfb ]

For s390 we can have VFs that are passed-through without the associated PF. Firmware provides an emulation layer to allow these devices to operate independently, but is missing emulation of the Memory Space Enable bit. For these as well as linked VFs, set no_command_memory which specifies these devices do not implement PCI_COMMAND_MEMORY.

Fixes abafbc551fdd ("vfio-pci: Invalidate mmaps and block MMIO access on disabled memory")
---
 arch/s390/pci/pci_bus.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
arch/s390/pci/pci_bus.c +3 -2
index 5967f30141563..c93486a9989bc 100644
@@ -197,9 +197,10 @@ void pcibios_bus_add_device(struct pci_dev *pdev)
 	 * With pdev->no_vf_scan the common PCI probing code does not
 	 * perform PF/VF linking.
 	 */
-	if (zdev->vfn)
+	if (zdev->vfn) {
 		zpci_bus_setup_virtfn(zdev->zbus, pdev, zdev->vfn);
-
+		pdev->no_command_memory = 1;
+	}
 }
 
 static int zpci_bus_add_device(struct zpci_bus *zbus, struct zpci_dev *zdev)
Signature · 1 line
2.25.1
author maintainer
#529 lore raw

PATCH 529/757 vfio/pci: Decouple PCI_COMMAND_MEMORY bit checks from is_virtfn

In reply to Greg Kroah-Hartman

From: Matthew Rosato <[email protected]>

[ Upstream commit 515ecd5368f1510152fa4f9b9ce55b66ac56c334 ]

While it is true that devices with is_virtfn=1 will have a Memory Space Enable bit that is hard-wired to 0, this is not the only case where we see this behavior -- For example some bare-metal hypervisors lack Memory Space Enable bit emulation for devices not setting is_virtfn (s390). Fix this by instead checking for the newly-added no_command_memory bit which directly denotes the need for PCI_COMMAND_MEMORY emulation in vfio.

Fixes abafbc551fdd ("vfio-pci: Invalidate mmaps and block MMIO access on disabled memory")
---
 drivers/vfio/pci/vfio_pci_config.c | 24 ++++++++++++++----------
 1 file changed, 14 insertions(+), 10 deletions(-)
drivers/vfio/pci/vfio_pci_config.c +14 -10
index d98843feddce0..5076d0155bc3f 100644
@@ -406,7 +406,7 @@ bool __vfio_pci_memory_enabled(struct vfio_pci_device *vdev)
 	 * PF SR-IOV capability, there's therefore no need to trigger
 	 * faults based on the virtual value.
 	 */
-	return pdev->is_virtfn || (cmd & PCI_COMMAND_MEMORY);
+	return pdev->no_command_memory || (cmd & PCI_COMMAND_MEMORY);
 }
 
 /*
@@ -520,8 +520,8 @@ static int vfio_basic_config_read(struct vfio_pci_device *vdev, int pos,
 
 	count = vfio_default_config_read(vdev, pos, count, perm, offset, val);
 
-	/* Mask in virtual memory enable for SR-IOV devices */
-	if (offset == PCI_COMMAND && vdev->pdev->is_virtfn) {
+	/* Mask in virtual memory enable */
+	if (offset == PCI_COMMAND && vdev->pdev->no_command_memory) {
 		u16 cmd = le16_to_cpu(*(__le16 *)&vdev->vconfig[PCI_COMMAND]);
 		u32 tmp_val = le32_to_cpu(*val);
 
@@ -589,9 +589,11 @@ static int vfio_basic_config_write(struct vfio_pci_device *vdev, int pos,
 		 * shows it disabled (phys_mem/io, then the device has
 		 * undergone some kind of backdoor reset and needs to be
 		 * restored before we allow it to enable the bars.
-		 * SR-IOV devices will trigger this, but we catch them later
+		 * SR-IOV devices will trigger this - for mem enable let's
+		 * catch this now and for io enable it will be caught later
 		 */
-		if ((new_mem && virt_mem && !phys_mem) ||
+		if ((new_mem && virt_mem && !phys_mem &&
+		     !pdev->no_command_memory) ||
 		    (new_io && virt_io && !phys_io) ||
 		    vfio_need_bar_restore(vdev))
 			vfio_bar_restore(vdev);
@@ -1734,12 +1736,14 @@ int vfio_config_init(struct vfio_pci_device *vdev)
 				 vconfig[PCI_INTERRUPT_PIN]);
 
 		vconfig[PCI_INTERRUPT_PIN] = 0; /* Gratuitous for good VFs */
-
+	}
+	if (pdev->no_command_memory) {
 		/*
-		 * VFs do no implement the memory enable bit of the COMMAND
-		 * register therefore we'll not have it set in our initial
-		 * copy of config space after pci_enable_device().  For
-		 * consistency with PFs, set the virtual enable bit here.
+		 * VFs and devices that set pdev->no_command_memory do not
+		 * implement the memory enable bit of the COMMAND register
+		 * therefore we'll not have it set in our initial copy of
+		 * config space after pci_enable_device().  For consistency
+		 * with PFs, set the virtual enable bit here.
 		 */
 		*(__le16 *)&vconfig[PCI_COMMAND] |=
 					cpu_to_le16(PCI_COMMAND_MEMORY);
Signature · 1 line
2.25.1
author maintainer
#530 lore raw

PATCH 530/757 vfio: fix a missed vfio group put in vfio_pin_pages

In reply to Greg Kroah-Hartman

From: Yan Zhao <[email protected]>

[ Upstream commit 28b130244061863cf0437b7af1625fb45ec1a71e ]

When error occurs, need to put vfio group after a successful get.

Fixes 95fc87b44104 ("vfio: Selective dirty page tracking if IOMMU backed device pins pages")
---
 drivers/vfio/vfio.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
drivers/vfio/vfio.c +4 -2
index 532bcaf28c11d..2151bc7f87ab1 100644
@@ -1949,8 +1949,10 @@ int vfio_pin_pages(struct device *dev, unsigned long *user_pfn, int npage,
 	if (!group)
 		return -ENODEV;
 
-	if (group->dev_counter > 1)
-		return -EINVAL;
+	if (group->dev_counter > 1) {
+		ret = -EINVAL;
+		goto err_pin_pages;
+	}
 
 	ret = vfio_group_add_container_user(group);
 	if (ret)
Signature · 1 line
2.25.1
author maintainer
#531 lore raw

PATCH 531/757 vfio/type1: fix dirty bitmap calculation in vfio_dma_rw

In reply to Greg Kroah-Hartman

From: Yan Zhao <[email protected]>

[ Upstream commit 2c5af98592f65517170c7bcc714566590d3f7397 ]

The count of dirtied pages is not only determined by count of copied pages, but also by the start offset.

e.g. if offset = PAGE_SIZE - 1, and *copied=2, the dirty pages count is 2, instead of 1 or 0.

Fixes d6a4c185660c ("vfio iommu: Implementation of ioctl for dirty pages tracking")
---
 drivers/vfio/vfio_iommu_type1.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/vfio/vfio_iommu_type1.c +2 -1
index 5fbf0c1f74338..d0438388feebe 100644
@@ -2933,7 +2933,8 @@ static int vfio_iommu_type1_dma_rw_chunk(struct vfio_iommu *iommu,
 			 * size
 			 */
 			bitmap_set(dma->bitmap, offset >> pgshift,
-				   *copied >> pgshift);
+				   ((offset + *copied - 1) >> pgshift) -
+				   (offset >> pgshift) + 1);
 		}
 	} else
 		*copied = copy_from_user(data, (void __user *)vaddr,
Signature · 1 line
2.25.1
author maintainer
#532 lore raw

PATCH 532/757 clk: qcom: gcc-sdm660: Fix wrong parent_map

In reply to Greg Kroah-Hartman

From: Konrad Dybcio <[email protected]>

[ Upstream commit d46e5a39f9be9288f1ce2170c4c7f8098f4e7f68 ]

This was likely overlooked while porting the driver upstream.

Fixes f2a76a2955c0 ("clk: qcom: Add Global Clock controller (GCC) driver for SDM660")
---
 drivers/clk/qcom/gcc-sdm660.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/clk/qcom/gcc-sdm660.c +1 -1
index f0b47b7d50ca6..31258795e7b86 100644
@@ -666,7 +666,7 @@ static struct clk_rcg2 hmss_rbcpr_clk_src = {
 	.cmd_rcgr = 0x48044,
 	.mnd_width = 0,
 	.hid_width = 5,
-	.parent_map = gcc_parent_map_xo_gpll0_gpll0_early_div,
+	.parent_map = gcc_parent_map_xo_gpll0,
 	.freq_tbl = ftbl_hmss_rbcpr_clk_src,
 	.clkr.hw.init = &(struct clk_init_data){
 		.name = "hmss_rbcpr_clk_src",
Signature · 1 line
2.25.1
author maintainer
#533 lore raw

PATCH 533/757 clk: keystone: sci-clk: fix parsing assigned-clock data during probe

In reply to Greg Kroah-Hartman

From: Tero Kristo <[email protected]>

[ Upstream commit 2f05cced7307489faab873367fb20cd212e1d890 ]

The DT clock probe loop incorrectly terminates after processing "clocks" only, fix this by re-starting the loop when all entries for current DT property have been parsed.

Fixes 8e48b33f9def ("clk: keystone: sci-clk: probe clocks from DT instead of firmware")
---
 drivers/clk/keystone/sci-clk.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/clk/keystone/sci-clk.c +1 -1
index 2ad26cb927fdb..f126b6045afa7 100644
@@ -522,7 +522,7 @@ static int ti_sci_scan_clocks_from_dt(struct sci_clk_provider *provider)
 		np = of_find_node_with_property(np, *clk_name);
 		if (!np) {
 			clk_name++;
-			break;
+			continue;
 		}
 
 		if (!of_device_is_available(np))
Signature · 1 line
2.25.1
author maintainer
#534 lore raw

PATCH 534/757 pwm: rockchip: Keep enabled PWMs running while probing

In reply to Greg Kroah-Hartman

From: Simon South <[email protected]>

[ Upstream commit 457f74abbed060a0395f75ab5297f2d76cada516 ]

Following commit cfc4c189bc70 ("pwm: Read initial hardware state at request time") the Rockchip PWM driver can no longer assume a device's pwm_state structure has been populated after a call to pwmchip_add(). Consequently, the test in rockchip_pwm_probe() intended to prevent the driver from stopping PWM devices already enabled by the bootloader no longer functions reliably and this can lead to the kernel hanging during startup, particularly on devices like the Pinebook Pro that use a PWM-controlled backlight for their display.

Avoid this by querying the device directly at probe time to determine whether or not it is enabled.

Fixes cfc4c189bc70 ("pwm: Read initial hardware state at request time")
---
 drivers/pwm/pwm-rockchip.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
drivers/pwm/pwm-rockchip.c +4 -1
index eb8c9cb645a6c..098e94335cb5b 100644
@@ -288,6 +288,7 @@ static int rockchip_pwm_probe(struct platform_device *pdev)
 	const struct of_device_id *id;
 	struct rockchip_pwm_chip *pc;
 	struct resource *r;
+	u32 enable_conf, ctrl;
 	int ret, count;
 
 	id = of_match_device(rockchip_pwm_dt_ids, &pdev->dev);
@@ -362,7 +363,9 @@ static int rockchip_pwm_probe(struct platform_device *pdev)
 	}
 
 	/* Keep the PWM clk enabled if the PWM appears to be up and running. */
-	if (!pwm_is_enabled(pc->chip.pwms))
+	enable_conf = pc->data->enable_conf;
+	ctrl = readl_relaxed(pc->base + pc->data->regs.ctrl);
+	if ((ctrl & enable_conf) != enable_conf)
 		clk_disable(pc->clk);
 
 	return 0;
Signature · 1 line
2.25.1
author maintainer
#535 lore raw

PATCH 535/757 pwm: img: Fix null pointer access in probe

In reply to Greg Kroah-Hartman

From: Hauke Mehrtens <[email protected]>

[ Upstream commit b39c0615d0667b3a6f2f5c4bf99ffadf3b518bb1 ]

dev_get_drvdata() is called in img_pwm_runtime_resume() before the driver data is set.
When pm_runtime_enabled() returns false in img_pwm_probe() it calls img_pwm_runtime_resume() which results in a null pointer access.

This patch fixes the problem by setting the driver data earlier in the img_pwm_probe() function.

This crash was seen when booting the Imagination Technologies Creator Ci40 (Marduk) with kernel 5.4 in OpenWrt.

Fixes e690ae526216 ("pwm: img: Add runtime PM")
---
 drivers/pwm/pwm-img.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/pwm/pwm-img.c +2 -1
index 599a0f66a3845..a34d95ed70b20 100644
@@ -277,6 +277,8 @@ static int img_pwm_probe(struct platform_device *pdev)
 		return PTR_ERR(pwm->pwm_clk);
 	}
 
+	platform_set_drvdata(pdev, pwm);
+
 	pm_runtime_set_autosuspend_delay(&pdev->dev, IMG_PWM_PM_TIMEOUT);
 	pm_runtime_use_autosuspend(&pdev->dev);
 	pm_runtime_enable(&pdev->dev);
@@ -313,7 +315,6 @@ static int img_pwm_probe(struct platform_device *pdev)
 		goto err_suspend;
 	}
 
-	platform_set_drvdata(pdev, pwm);
 	return 0;
 
 err_suspend:
Signature · 1 line
2.25.1
author maintainer
#536 lore raw

PATCH 536/757 nfsd: Cache R, RW, and W opens separately

In reply to Greg Kroah-Hartman

From: J. Bruce Fields <[email protected]>

[ Upstream commit ae3c57b5ca47665dc3416447a5534a9796096d86 ]

The nfsd open code has always kept separate read-only, read-write, and write-only opens as necessary to ensure that when a client closes or downgrades, we don't retain more access than necessary.

Also, I didn't realize the cache behaved this way when I wrote 94415b06eb8a "nfsd4: a client's own opens needn't prevent delegations". There I assumed fi_fds[O_WRONLY] and fi_fds[O_RDWR] would always be distinct. The violation of that assumption is triggering a WARN_ON_ONCE() and could also cause the server to give out a delegation when it shouldn't.

Fixes 94415b06eb8a ("nfsd4: a client's own opens needn't prevent delegations")
---
 fs/nfsd/filecache.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
fs/nfsd/filecache.c +1 -1
index c8b9d2667ee6f..3c6c2f7d1688b 100644
@@ -889,7 +889,7 @@ nfsd_file_find_locked(struct inode *inode, unsigned int may_flags,
 
 	hlist_for_each_entry_rcu(nf, &nfsd_file_hashtbl[hashval].nfb_head,
 				 nf_node, lockdep_is_held(&nfsd_file_hashtbl[hashval].nfb_lock)) {
-		if ((need & nf->nf_may) != need)
+		if (nf->nf_may != need)
 			continue;
 		if (nf->nf_inode != inode)
 			continue;
Signature · 1 line
2.25.1
author maintainer
#537 lore raw

PATCH 537/757 remoteproc/mediatek: fix null pointer dereference on null scp pointer

In reply to Greg Kroah-Hartman

From: Colin Ian King <[email protected]>

[ Upstream commit 434ac4d51407ce3764a6ae96a89d90b8ae2826fb ]

Currently when pointer scp is null a dev_err is being called that references the pointer which is the very thing we are trying to avoid doing. Remove the extraneous error message to avoid this issue.

Addresses-Coverity: ("Dereference after null check")

Fixes 63c13d61eafe ("remoteproc/mediatek: add SCP support for mt8183")
---
 drivers/remoteproc/mtk_scp_ipi.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)
drivers/remoteproc/mtk_scp_ipi.c +1 -3
index 3d3d87210ef2c..58d1d7e571d66 100644
@@ -30,10 +30,8 @@ int scp_ipi_register(struct mtk_scp *scp,
 		     scp_ipi_handler_t handler,
 		     void *priv)
 {
-	if (!scp) {
-		dev_err(scp->dev, "scp device is not ready\n");
+	if (!scp)
 		return -EPROBE_DEFER;
-	}
 
 	if (WARN_ON(id >= SCP_IPI_MAX) || WARN_ON(handler == NULL))
 		return -EINVAL;
Signature · 1 line
2.25.1
author maintainer
#538 lore raw

PATCH 538/757 PCI: hv: Fix hibernation in case interrupts are not re-created

In reply to Greg Kroah-Hartman

From: Dexuan Cui <[email protected]>

[ Upstream commit 915cff7f38c5e4d47f187f8049245afc2cb3e503 ]

pci_restore_msi_state() directly writes the MSI/MSI-X related registers via MMIO. On a physical machine, this works perfectly; for a Linux VM running on a hypervisor, which typically enables IOMMU interrupt remapping, the hypervisor usually should trap and emulate the MMIO accesses in order to re-create the necessary interrupt remapping table entries in the IOMMU, otherwise the interrupts can not work in the VM after hibernation.

Hyper-V is different from other hypervisors in that it does not trap and emulate the MMIO accesses, and instead it uses a para-virtualized method, which requires the VM to call hv_compose_msi_msg() to notify the hypervisor of the info that would be passed to the hypervisor in the case of the trap-and-emulate method. This is not an issue to a lot of PCI device drivers, which destroy and re-create the interrupts across hibernation, so hv_compose_msi_msg() is called automatically. However, some PCI device drivers (e.g. the in-tree GPU driver nouveau and the out-of-tree Nvidia proprietary GPU driver) do not destroy and re-create MSI/MSI-X interrupts across hibernation, so hv_pci_resume() has to call hv_compose_msi_msg(), otherwise the PCI device drivers can no longer receive interrupts after the VM resumes from hibernation.

Hyper-V is also different in that chip->irq_unmask() may fail in a Linux VM running on Hyper-V (on a physical machine, chip->irq_unmask() can not fail because unmasking an MSI/MSI-X register just means an MMIO write): during hibernation, when a CPU is offlined, the kernel tries to move the interrupt to the remaining CPUs that haven't been offlined yet. In this case, hv_irq_unmask() -> hv_do_hypercall() always fails because the vmbus channel has been closed: here the early "return" in hv_irq_unmask() means the pci_msi_unmask_irq() is not called, i.e. the desc->masked remains "true", so later after hibernation, the MSI interrupt always remains masked, which is incorrect. Refer to cpu_disable_common() -> fixup_irqs() -> irq_migrate_all_off_this_cpu() -> migrate_one_irq():

static bool migrate_one_irq(struct irq_desc *desc) {
...

        if (maskchip && chip->irq_mask)
                chip->irq_mask(d);
...
        err = irq_do_set_affinity(d, affinity, false);
...
        if (maskchip && chip->irq_unmask)
                chip->irq_unmask(d);

Fix the issue by calling pci_msi_unmask_irq() unconditionally in hv_irq_unmask(). Also suppress the error message for hibernation because the hypercall failure during hibernation does not matter (at this time all the devices have been frozen). Note: the correct affinity info is still updated into the irqdata data structure in migrate_one_irq() -> irq_do_set_affinity() -> hv_set_affinity(), so later when the VM resumes, hv_pci_restore_msi_state() is able to correctly restore the interrupt with the correct affinity.

---
 drivers/pci/controller/pci-hyperv.c | 50 +++++++++++++++++++++++++++--
 1 file changed, 47 insertions(+), 3 deletions(-)
drivers/pci/controller/pci-hyperv.c +47 -3
index fc4c3a15e5707..a9df492fbffa2 100644
@@ -1276,11 +1276,25 @@ static void hv_irq_unmask(struct irq_data *data)
 exit_unlock:
 	spin_unlock_irqrestore(&hbus->retarget_msi_interrupt_lock, flags);
 
-	if (res) {
+	/*
+	 * During hibernation, when a CPU is offlined, the kernel tries
+	 * to move the interrupt to the remaining CPUs that haven't
+	 * been offlined yet. In this case, the below hv_do_hypercall()
+	 * always fails since the vmbus channel has been closed:
+	 * refer to cpu_disable_common() -> fixup_irqs() ->
+	 * irq_migrate_all_off_this_cpu() -> migrate_one_irq().
+	 *
+	 * Suppress the error message for hibernation because the failure
+	 * during hibernation does not matter (at this time all the devices
+	 * have been frozen). Note: the correct affinity info is still updated
+	 * into the irqdata data structure in migrate_one_irq() ->
+	 * irq_do_set_affinity() -> hv_set_affinity(), so later when the VM
+	 * resumes, hv_pci_restore_msi_state() is able to correctly restore
+	 * the interrupt with the correct affinity.
+	 */
+	if (res && hbus->state != hv_pcibus_removing)
 		dev_err(&hbus->hdev->device,
 			"%s() failed: %#llx", __func__, res);
-		return;
-	}
 
 	pci_msi_unmask_irq(data);
 }
@@ -3372,6 +3386,34 @@ static int hv_pci_suspend(struct hv_device *hdev)
 	return 0;
 }
 
+static int hv_pci_restore_msi_msg(struct pci_dev *pdev, void *arg)
+{
+	struct msi_desc *entry;
+	struct irq_data *irq_data;
+
+	for_each_pci_msi_entry(entry, pdev) {
+		irq_data = irq_get_irq_data(entry->irq);
+		if (WARN_ON_ONCE(!irq_data))
+			return -EINVAL;
+
+		hv_compose_msi_msg(irq_data, &entry->msg);
+	}
+
+	return 0;
+}
+
+/*
+ * Upon resume, pci_restore_msi_state() -> ... ->  __pci_write_msi_msg()
+ * directly writes the MSI/MSI-X registers via MMIO, but since Hyper-V
+ * doesn't trap and emulate the MMIO accesses, here hv_compose_msi_msg()
+ * must be used to ask Hyper-V to re-create the IOMMU Interrupt Remapping
+ * Table entries.
+ */
+static void hv_pci_restore_msi_state(struct hv_pcibus_device *hbus)
+{
+	pci_walk_bus(hbus->pci_bus, hv_pci_restore_msi_msg, NULL);
+}
+
 static int hv_pci_resume(struct hv_device *hdev)
 {
 	struct hv_pcibus_device *hbus = hv_get_drvdata(hdev);
@@ -3405,6 +3447,8 @@ static int hv_pci_resume(struct hv_device *hdev)
 
 	prepopulate_bars(hbus);
 
+	hv_pci_restore_msi_state(hbus);
+
 	hbus->state = hv_pcibus_installed;
 	return 0;
 out:
Signature · 1 line
2.25.1
author maintainer
#539 lore raw

PATCH 539/757 clk: rockchip: Initialize hw to error to avoid undefined behavior

In reply to Greg Kroah-Hartman

From: Stephen Boyd <[email protected]>

[ Upstream commit b608f11d49ec671739604cc763248d8e8fadbbeb ]

We can get down to this return value from ERR_CAST() without initializing hw. Set it to -ENOMEM so that we always return something sane.

Fixes the following smatch warning:

drivers/clk/rockchip/clk-half-divider.c:228 rockchip_clk_register_halfdiv() error: uninitialized symbol 'hw'. drivers/clk/rockchip/clk-half-divider.c:228 rockchip_clk_register_halfdiv() warn: passing zero to 'ERR_CAST'

Cc Elaine Zhang <[email protected]>
Cc Heiko Stuebner <[email protected]>
Fixes 956060a52795 ("clk: rockchip: add support for half divider")
---
 drivers/clk/rockchip/clk-half-divider.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/clk/rockchip/clk-half-divider.c +1 -1
index b333fc28c94b6..37c858d689e0d 100644
@@ -166,7 +166,7 @@ struct clk *rockchip_clk_register_halfdiv(const char *name,
 					  unsigned long flags,
 					  spinlock_t *lock)
 {
-	struct clk *clk;
+	struct clk *clk = ERR_PTR(-ENOMEM);
 	struct clk_mux *mux = NULL;
 	struct clk_gate *gate = NULL;
 	struct clk_divider *div = NULL;
Signature · 1 line
2.25.1
author maintainer
#540 lore raw

PATCH 540/757 clk: mediatek: add UART0 clock support

In reply to Greg Kroah-Hartman

From: Hanks Chen <[email protected]>

[ Upstream commit 804a892456b73604b7ecfb1b00a96a29f3d2aedf ]

Add MT6779 UART0 clock support.

Fixes 710774e04861 ("clk: mediatek: Add MT6779 clock support")
---
 drivers/clk/mediatek/clk-mt6779.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/clk/mediatek/clk-mt6779.c +2 -0
index 9766cccf5844c..6e0d3a1667291 100644
@@ -919,6 +919,8 @@ static const struct mtk_gate infra_clks[] = {
 		    "pwm_sel", 19),
 	GATE_INFRA0(CLK_INFRA_PWM, "infra_pwm",
 		    "pwm_sel", 21),
+	GATE_INFRA0(CLK_INFRA_UART0, "infra_uart0",
+		    "uart_sel", 22),
 	GATE_INFRA0(CLK_INFRA_UART1, "infra_uart1",
 		    "uart_sel", 23),
 	GATE_INFRA0(CLK_INFRA_UART2, "infra_uart2",
Signature · 1 line
2.25.1
author maintainer
#541 lore raw

PATCH 541/757 module: statically initialize init section freeing data

In reply to Greg Kroah-Hartman

From: Daniel Jordan <[email protected]>

[ Upstream commit fdf09ab887829cd1b671e45d9549f8ec1ffda0fa ]

Corentin hit the following workqueue warning when running with CRYPTO_MANAGER_EXTRA_TESTS:

  WARNING: CPU: 2 PID: 147 at kernel/workqueue.c:1473 __queue_work+0x3b8/0x3d0
  Modules linked in: ghash_generic
  CPU: 2 PID: 147 Comm: modprobe Not tainted
      5.6.0-rc1-next-20200214-00068-g166c9264f0b1-dirty #545
  Hardware name: Pine H64 model A (DT)
  pc : __queue_work+0x3b8/0x3d0
  Call trace:
   __queue_work+0x3b8/0x3d0
   queue_work_on+0x6c/0x90
   do_init_module+0x188/0x1f0
   load_module+0x1d00/0x22b0

I wasn't able to reproduce on x86 or rpi 3b+.

This is

WARN_ON(!list_empty(&work->entry))

from __queue_work(), and it happens because the init_free_wq work item isn't initialized in time for a crypto test that requests the gcm module. Some crypto tests were recently moved earlier in boot as explained in commit c4741b230597 ("crypto: run initcalls for generic implementations earlier"), which went into mainline less than two weeks before the Fixes commit.

Avoid the warning by statically initializing init_free_wq and the corresponding llist.

Tested-on: sun50i-h6-pine-h64
Tested-on: imx8mn-ddr4-evk
Tested-on: sun50i-a64-bananapi-m64

---
 kernel/module.c | 13 +++----------
 1 file changed, 3 insertions(+), 10 deletions(-)
kernel/module.c +3 -10
index 1c5cff34d9f28..8486123ffd7af 100644
@@ -91,8 +91,9 @@ EXPORT_SYMBOL_GPL(module_mutex);
 static LIST_HEAD(modules);
 
 /* Work queue for freeing init sections in success case */
-static struct work_struct init_free_wq;
-static struct llist_head init_free_list;
+static void do_free_init(struct work_struct *w);
+static DECLARE_WORK(init_free_wq, do_free_init);
+static LLIST_HEAD(init_free_list);
 
 #ifdef CONFIG_MODULES_TREE_LOOKUP
 
@@ -3579,14 +3580,6 @@ static void do_free_init(struct work_struct *w)
 	}
 }
 
-static int __init modules_wq_init(void)
-{
-	INIT_WORK(&init_free_wq, do_free_init);
-	init_llist_head(&init_free_list);
-	return 0;
-}
-module_init(modules_wq_init);
-
 /*
  * This is where the real work happens.
  *
Signature · 1 line
2.25.1
author maintainer
#542 lore raw

PATCH 542/757 clk: at91: clk-main: update key before writing AT91_CKGR_MOR

In reply to Greg Kroah-Hartman

From: Claudiu Beznea <[email protected]>

[ Upstream commit 85d071e7f19a6a9abf30476b90b3819642568756 ]

SAMA5D2 datasheet specifies on chapter 33.22.8 (PMC Clock Generator Main Oscillator Register) that writing any value other than 0x37 on KEY field aborts the write operation. Use the key when selecting main clock parent.

---
 drivers/clk/at91/clk-main.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)
drivers/clk/at91/clk-main.c +8 -3
index 5c83e899084ff..cfae2f59df665 100644
@@ -437,12 +437,17 @@ static int clk_sam9x5_main_set_parent(struct clk_hw *hw, u8 index)
 		return -EINVAL;
 
 	regmap_read(regmap, AT91_CKGR_MOR, &tmp);
-	tmp &= ~MOR_KEY_MASK;
 
 	if (index && !(tmp & AT91_PMC_MOSCSEL))
-		regmap_write(regmap, AT91_CKGR_MOR, tmp | AT91_PMC_MOSCSEL);
+		tmp = AT91_PMC_MOSCSEL;
 	else if (!index && (tmp & AT91_PMC_MOSCSEL))
-		regmap_write(regmap, AT91_CKGR_MOR, tmp & ~AT91_PMC_MOSCSEL);
+		tmp = 0;
+	else
+		return 0;
+
+	regmap_update_bits(regmap, AT91_CKGR_MOR,
+			   AT91_PMC_MOSCSEL | MOR_KEY_MASK,
+			   tmp | AT91_PMC_KEY);
 
 	while (!clk_sam9x5_main_ready(regmap))
 		cpu_relax();
Signature · 1 line
2.25.1
author maintainer
#543 lore raw

PATCH 543/757 clk: bcm2835: add missing release if devm_clk_hw_register fails

In reply to Greg Kroah-Hartman

From: Navid Emamdoost <[email protected]>

[ Upstream commit f6c992ca7dd4f49042eec61f3fb426c94d901675 ]

In the implementation of bcm2835_register_pll(), the allocated pll is leaked if devm_clk_hw_register() fails to register hw. Release pll if devm_clk_hw_register() fails.

Fixes 41691b8862e2 ("clk: bcm2835: Add support for programming the audio domain clocks")
---
 drivers/clk/bcm/clk-bcm2835.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/clk/bcm/clk-bcm2835.c +3 -1
index 3439bc65bb4e3..1ac803e14fa3e 100644
@@ -1338,8 +1338,10 @@ static struct clk_hw *bcm2835_register_pll(struct bcm2835_cprman *cprman,
 	pll->hw.init = &init;
 
 	ret = devm_clk_hw_register(cprman->dev, &pll->hw);
-	if (ret)
+	if (ret) {
+		kfree(pll);
 		return NULL;
+	}
 	return &pll->hw;
 }
 
Signature · 1 line
2.25.1
author maintainer
#544 lore raw

PATCH 544/757 kbuild: deb-pkg: do not build linux-headers package if CONFIG_MODULES=n

In reply to Greg Kroah-Hartman

From: Masahiro Yamada <[email protected]>

[ Upstream commit bac977cbc0d6731fb8e67c2be0e4acbd959e10b3 ]

Since commit 269a535ca931 ("modpost: generate vmlinux.symvers and reuse it for the second modpost"), with CONFIG_MODULES disabled, "make deb-pkg" (or "make bindeb-pkg") fails with:

find: ‘Module.symvers’: No such file or directory

If CONFIG_MODULES is disabled, it doesn't really make sense to build the linux-headers package.

Fixes 269a535ca931 ("modpost: generate vmlinux.symvers and reuse it for the second modpost")
---
 scripts/package/builddeb |  6 ++++--
 scripts/package/mkdebian | 19 ++++++++++++-------
 2 files changed, 16 insertions(+), 9 deletions(-)
scripts/package/builddeb +4 -2
index 6df3c9f8b2da6..8277144298a00 100755
@@ -202,8 +202,10 @@ EOF
 done
 
 if [ "$ARCH" != "um" ]; then
-	deploy_kernel_headers debian/linux-headers
-	create_package linux-headers-$version debian/linux-headers
+	if is_enabled CONFIG_MODULES; then
+		deploy_kernel_headers debian/linux-headers
+		create_package linux-headers-$version debian/linux-headers
+	fi
 
 	deploy_libc_headers debian/linux-libc-dev
 	create_package linux-libc-dev debian/linux-libc-dev
scripts/package/mkdebian +12 -7
index 48fbd3d0284a8..ccd46aad1dff6 100755
@@ -183,13 +183,6 @@ Description: Linux kernel, version $version
  This package contains the Linux kernel, modules and corresponding other
  files, version: $version.
 
-Package: $kernel_headers_packagename
-Architecture: $debarch
-Description: Linux kernel headers for $version on $debarch
- This package provides kernel header files for $version on $debarch
- .
- This is useful for people who need to build external modules
-
 Package: linux-libc-dev
 Section: devel
 Provides: linux-kernel-headers
@@ -200,6 +193,18 @@ Description: Linux support headers for userspace development
 Multi-Arch: same
 EOF
 
+if is_enabled CONFIG_MODULES; then
+cat <<EOF >> debian/control
+
+Package: $kernel_headers_packagename
+Architecture: $debarch
+Description: Linux kernel headers for $version on $debarch
+ This package provides kernel header files for $version on $debarch
+ .
+ This is useful for people who need to build external modules
+EOF
+fi
+
 if is_enabled CONFIG_DEBUG_INFO; then
 cat <<EOF >> debian/control
 
Signature · 1 line
2.25.1
author maintainer
#545 lore raw

PATCH 545/757 watchdog: Fix memleak in watchdog_cdev_register

In reply to Greg Kroah-Hartman

From: Dinghao Liu <[email protected]>

[ Upstream commit 5afb6d203d0293512aa2c6ae098274a2a4f6ed02 ]

When watchdog_kworker is NULL, we should free wd_data before the function returns to prevent memleak.

Fixes 664a39236e718 ("watchdog: Introduce hardware maximum heartbeat in watchdog core")
---
 drivers/watchdog/watchdog_dev.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/watchdog/watchdog_dev.c +3 -1
index 6798addabd5a0..785270ee337cb 100644
@@ -994,8 +994,10 @@ static int watchdog_cdev_register(struct watchdog_device *wdd)
 	wd_data->wdd = wdd;
 	wdd->wd_data = wd_data;
 
-	if (IS_ERR_OR_NULL(watchdog_kworker))
+	if (IS_ERR_OR_NULL(watchdog_kworker)) {
+		kfree(wd_data);
 		return -ENODEV;
+	}
 
 	device_initialize(&wd_data->dev);
 	wd_data->dev.devt = MKDEV(MAJOR(watchdog_devt), wdd->id);
Signature · 1 line
2.25.1
author maintainer
#546 lore raw

PATCH 546/757 watchdog: Use put_device on error

In reply to Greg Kroah-Hartman

From: Dinghao Liu <[email protected]>

[ Upstream commit 937425d4cd3ae4e2882b41e332bbbab616bcf0ad ]

We should use put_device() instead of freeing device directly after device_initialize().

---
 drivers/watchdog/watchdog_dev.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/watchdog/watchdog_dev.c +1 -1
index 785270ee337cb..bcf01af3fa6a8 100644
@@ -1023,7 +1023,7 @@ static int watchdog_cdev_register(struct watchdog_device *wdd)
 				pr_err("%s: a legacy watchdog module is probably present.\n",
 					wdd->info->identity);
 			old_wd_data = NULL;
-			kfree(wd_data);
+			put_device(&wd_data->dev);
 			return err;
 		}
 	}
Signature · 1 line
2.25.1
author maintainer
#547 lore raw

PATCH 547/757 watchdog: sp5100: Fix definition of EFCH_PM_DECODEEN3

In reply to Greg Kroah-Hartman

From: Guenter Roeck <[email protected]>

[ Upstream commit 08c619b4923056b5dd2d5045757468c76ad0e3fe ]

EFCH_PM_DECODEEN3 is supposed to access DECODEEN register bits 24..31, in other words the register at byte offset 3.

Cc Jan Kiszka <[email protected]>
Fixes 887d2ec51e34b ("watchdog: sp5100_tco: Add support for recent FCH versions")
---
 drivers/watchdog/sp5100_tco.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/watchdog/sp5100_tco.h +1 -1
index 87eaf357ae01f..adf015aa4126f 100644
@@ -70,7 +70,7 @@
 #define EFCH_PM_DECODEEN_WDT_TMREN	BIT(7)
 
 
-#define EFCH_PM_DECODEEN3		0x00
+#define EFCH_PM_DECODEEN3		0x03
 #define EFCH_PM_DECODEEN_SECOND_RES	GENMASK(1, 0)
 #define EFCH_PM_WATCHDOG_DISABLE	((u8)GENMASK(3, 2))
 
Signature · 1 line
2.25.1
author maintainer
#548 lore raw

PATCH 548/757 clk: at91: sam9x60: support only two programmable clocks

In reply to Greg Kroah-Hartman

From: Claudiu Beznea <[email protected]>

[ Upstream commit fcedb589b5a88d73d3155c4a8690d6dda91a3156 ]

According to datasheet (Chapter 29.16.13, PMC Programmable Clock Register) there are only two programmable clocks on SAM9X60.

---
 drivers/clk/at91/sam9x60.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/clk/at91/sam9x60.c +1 -1
index ab6318c0589e9..3c4c956035954 100644
@@ -279,7 +279,7 @@ static void __init sam9x60_pmc_setup(struct device_node *np)
 	parent_names[3] = "masterck";
 	parent_names[4] = "pllack_divck";
 	parent_names[5] = "upllck_divck";
-	for (i = 0; i < 8; i++) {
+	for (i = 0; i < 2; i++) {
 		char name[6];
 
 		snprintf(name, sizeof(name), "prog%d", i);
Signature · 1 line
2.25.1
author maintainer
#549 lore raw

PATCH 549/757 svcrdma: fix bounce buffers for unaligned offsets and multiple pages

In reply to Greg Kroah-Hartman

From: Dan Aloni <[email protected]>

[ Upstream commit c327a310ec4d6ecbea13185ed56c11def441d9ab ]

This was discovered using O_DIRECT at the client side, with small unaligned file offsets or IOs that span multiple file pages.

Fixes e248aa7be86 ("svcrdma: Remove max_sge check at connect time")
---
 net/sunrpc/xprtrdma/svc_rdma_sendto.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
net/sunrpc/xprtrdma/svc_rdma_sendto.c +2 -1
index 7b94d971feb3b..c3d588b149aaa 100644
@@ -638,10 +638,11 @@ static int svc_rdma_pull_up_reply_msg(struct svcxprt_rdma *rdma,
 		while (remaining) {
 			len = min_t(u32, PAGE_SIZE - pageoff, remaining);
 
-			memcpy(dst, page_address(*ppages), len);
+			memcpy(dst, page_address(*ppages) + pageoff, len);
 			remaining -= len;
 			dst += len;
 			pageoff = 0;
+			ppages++;
 		}
 	}
 
Signature · 1 line
2.25.1
author maintainer
#550 lore raw

PATCH 550/757 ext4: fix dead loop in ext4_mb_new_blocks

In reply to Greg Kroah-Hartman

From: Ye Bin <[email protected]>

[ Upstream commit 70022da804f0f3f152115688885608c39182082e ]

As we test disk offline/online with running fsstress, we find fsstress process is keeping running state.
kworker/u32:3-262 [004] ...1 140.787471: ext4_mb_discard_preallocations: dev 8,32 needed 114
....
kworker/u32:3-262 [004] ...1 140.787471: ext4_mb_discard_preallocations: dev 8,32 needed 114

ext4_mb_new_blocks
repeat:

        ext4_mb_discard_preallocations_should_retry(sb, ac, &seq)
                freed = ext4_mb_discard_preallocations
                        ext4_mb_discard_group_preallocations
                                this_cpu_inc(discard_pa_seq);
                ---> freed == 0
                seq_retry = ext4_get_discard_pa_seq_sum
                        for_each_possible_cpu(__cpu)
                                __seq += per_cpu(discard_pa_seq, __cpu);
                if (seq_retry != *seq) {
                        *seq = seq_retry;
                        ret = true;
                }

As we see seq_retry is sum of discard_pa_seq every cpu, if ext4_mb_discard_group_preallocations return zero discard_pa_seq in this cpu maybe increase one, so condition "seq_retry != *seq" have always been met.
Ritesh Harjani suggest to in ext4_mb_discard_group_preallocations function we only increase discard_pa_seq when there is some PA to free.

Fixes 07b5b8e1ac40 ("ext4: mballoc: introduce pcpu seqcnt for freeing PA to improve ENOSPC handling")
---
 fs/ext4/mballoc.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
fs/ext4/mballoc.c +3 -1
index 132c118d12e15..ff47347012f4b 100644
@@ -4189,7 +4189,6 @@ ext4_mb_discard_group_preallocations(struct super_block *sb,
 	INIT_LIST_HEAD(&list);
 repeat:
 	ext4_lock_group(sb, group);
-	this_cpu_inc(discard_pa_seq);
 	list_for_each_entry_safe(pa, tmp,
 				&grp->bb_prealloc_list, pa_group_list) {
 		spin_lock(&pa->pa_lock);
@@ -4206,6 +4205,9 @@ ext4_mb_discard_group_preallocations(struct super_block *sb,
 		/* seems this one can be freed ... */
 		ext4_mb_mark_pa_deleted(sb, pa);
 
+		if (!free)
+			this_cpu_inc(discard_pa_seq);
+
 		/* we can trust pa_free ... */
 		free += pa->pa_free;
 
Signature · 1 line
2.25.1
author maintainer
#551 lore raw

PATCH 551/757 ext4: discard preallocations before releasing group lock

In reply to Greg Kroah-Hartman

From: Jan Kara <[email protected]>

[ Upstream commit 5b3dc19dda6691e8ab574e8eede1aef6f02a4f1c ]

ext4_mb_discard_group_preallocations() can be releasing group lock with preallocations accumulated on its local list. Thus although discard_pa_seq was incremented and concurrent allocating processes will be retrying allocations, it can happen that premature ENOSPC error is returned because blocks used for preallocations are not available for reuse yet. Make sure we always free locally accumulated preallocations before releasing group lock.

Fixes 07b5b8e1ac40 ("ext4: mballoc: introduce pcpu seqcnt for freeing PA to improve ENOSPC handling")
---
 fs/ext4/mballoc.c | 33 +++++++++++++--------------------
 1 file changed, 13 insertions(+), 20 deletions(-)
fs/ext4/mballoc.c +13 -20
index ff47347012f4b..a8d99f676fb1f 100644
@@ -4160,7 +4160,7 @@ ext4_mb_discard_group_preallocations(struct super_block *sb,
 	struct ext4_buddy e4b;
 	int err;
 	int busy = 0;
-	int free = 0;
+	int free, free_total = 0;
 
 	mb_debug(sb, "discard preallocation for group %u\n", group);
 	if (list_empty(&grp->bb_prealloc_list))
@@ -4188,6 +4188,7 @@ ext4_mb_discard_group_preallocations(struct super_block *sb,
 
 	INIT_LIST_HEAD(&list);
 repeat:
+	free = 0;
 	ext4_lock_group(sb, group);
 	list_for_each_entry_safe(pa, tmp,
 				&grp->bb_prealloc_list, pa_group_list) {
@@ -4217,22 +4218,6 @@ ext4_mb_discard_group_preallocations(struct super_block *sb,
 		list_add(&pa->u.pa_tmp_list, &list);
 	}
 
-	/* if we still need more blocks and some PAs were used, try again */
-	if (free < needed && busy) {
-		busy = 0;
-		ext4_unlock_group(sb, group);
-		cond_resched();
-		goto repeat;
-	}
-
-	/* found anything to free? */
-	if (list_empty(&list)) {
-		BUG_ON(free != 0);
-		mb_debug(sb, "Someone else may have freed PA for this group %u\n",
-			 group);
-		goto out;
-	}
-
 	/* now free all selected PAs */
 	list_for_each_entry_safe(pa, tmp, &list, u.pa_tmp_list) {
 
@@ -4250,14 +4235,22 @@ ext4_mb_discard_group_preallocations(struct super_block *sb,
 		call_rcu(&(pa)->u.pa_rcu, ext4_mb_pa_callback);
 	}
 
-out:
+	free_total += free;
+
+	/* if we still need more blocks and some PAs were used, try again */
+	if (free_total < needed && busy) {
+		ext4_unlock_group(sb, group);
+		cond_resched();
+		busy = 0;
+		goto repeat;
+	}
 	ext4_unlock_group(sb, group);
 	ext4_mb_unload_buddy(&e4b);
 	put_bh(bitmap_bh);
 out_dbg:
 	mb_debug(sb, "discarded (%d) blocks preallocated for group %u bb_free (%d)\n",
-		 free, group, grp->bb_free);
-	return free;
+		 free_total, group, grp->bb_free);
+	return free_total;
 }
 
 /*
Signature · 1 line
2.25.1
author maintainer
#552 lore raw

PATCH 552/757 ext4: disallow modifying DAX inode flag if inline_data has been set

In reply to Greg Kroah-Hartman

From: Xiao Yang <[email protected]>

[ Upstream commit aa2f77920b743c44e02e2dc8474bbf8bd30007a2 ]

inline_data is mutually exclusive to DAX so enabling both of them triggers the following issue:
------------------------------------------

# mkfs.ext4 -F -O inline_data /dev/pmem1
...
# mount /dev/pmem1 /mnt
# echo 'test' >/mnt/file
# lsattr -l /mnt/file
/mnt/file                    Inline_Data
# xfs_io -c "chattr +x" /mnt/file
# xfs_io -c "lsattr -v" /mnt/file
[dax] /mnt/file
# umount /mnt
# mount /dev/pmem1 /mnt
# cat /mnt/file
cat: /mnt/file: Numerical result out of range
------------------------------------------
---
 fs/ext4/ext4.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
fs/ext4/ext4.h +1 -1
index 523e00d7b3924..69187b6205b2b 100644
@@ -492,7 +492,7 @@ struct flex_groups {
 
 /* Flags which are mutually exclusive to DAX */
 #define EXT4_DAX_MUT_EXCL (EXT4_VERITY_FL | EXT4_ENCRYPT_FL |\
-			   EXT4_JOURNAL_DATA_FL)
+			   EXT4_JOURNAL_DATA_FL | EXT4_INLINE_DATA_FL)
 
 /* Mask out flags that are inappropriate for the given type of inode. */
 static inline __u32 ext4_mask_flags(umode_t mode, __u32 flags)
Signature · 1 line
2.25.1
author maintainer
#553 lore raw

PATCH 553/757 ext4: limit entries returned when counting fsmap records

In reply to Greg Kroah-Hartman

From: Darrick J. Wong <[email protected]>

[ Upstream commit af8c53c8bc087459b1aadd4c94805d8272358d79 ]

If userspace asked fsmap to try to count the number of entries, we cannot return more than UINT_MAX entries because fmh_entries is u32. Therefore, stop counting if we hit this limit or else we will waste time to return truncated results.

---
 fs/ext4/fsmap.c | 3 +++
 1 file changed, 3 insertions(+)
fs/ext4/fsmap.c +3 -0
index dbccf46f17709..37347ba868b70 100644
@@ -108,6 +108,9 @@ static int ext4_getfsmap_helper(struct super_block *sb,
 
 	/* Are we just counting mappings? */
 	if (info->gfi_head->fmh_count == 0) {
+		if (info->gfi_head->fmh_entries == UINT_MAX)
+			return EXT4_QUERY_RANGE_ABORT;
+
 		if (rec_fsblk > info->gfi_next_fsblk)
 			info->gfi_head->fmh_entries++;
 
Signature · 1 line
2.25.1
author maintainer
#554 lore raw

PATCH 554/757 vfio/pci: Clear token on bypass registration failure

In reply to Greg Kroah-Hartman

From: Alex Williamson <[email protected]>

[ Upstream commit 852b1beecb6ff9326f7ca4bc0fe69ae860ebdb9e ]

The eventfd context is used as our irqbypass token, therefore if an eventfd is re-used, our token is the same. The irqbypass code will return an -EBUSY in this case, but we'll still attempt to unregister the producer, where if that duplicate token still exists, results in removing the wrong object. Clear the token of failed producers so that they harmlessly fall out when unregistered.

Fixes 6d7425f109d2 ("vfio: Register/unregister irq_bypass_producer")
---
 drivers/vfio/pci/vfio_pci_intrs.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/vfio/pci/vfio_pci_intrs.c +3 -1
index 1d9fb25929459..869dce5f134dd 100644
@@ -352,11 +352,13 @@ static int vfio_msi_set_vector_signal(struct vfio_pci_device *vdev,
 	vdev->ctx[vector].producer.token = trigger;
 	vdev->ctx[vector].producer.irq = irq;
 	ret = irq_bypass_register_producer(&vdev->ctx[vector].producer);
-	if (unlikely(ret))
+	if (unlikely(ret)) {
 		dev_info(&pdev->dev,
 		"irq bypass producer (token %p) registration fails: %d\n",
 		vdev->ctx[vector].producer.token, ret);
 
+		vdev->ctx[vector].producer.token = NULL;
+	}
 	vdev->ctx[vector].trigger = trigger;
 
 	return 0;
Signature · 1 line
2.25.1
author maintainer
#555 lore raw

PATCH 555/757 vfio iommu type1: Fix memory leak in vfio_iommu_type1_pin_pages

In reply to Greg Kroah-Hartman

From: Xiaoyang Xu <[email protected]>

[ Upstream commit 2e6cfd496f5b57034cf2aec738799571b5a52124 ]

pfn is not added to pfn_list when vfio_add_to_pfn_list fails. vfio_unpin_page_external will exit directly without calling vfio_iova_put_vfio_pfn. This will lead to a memory leak.

Fixes a54eb55045ae ("vfio iommu type1: Add support for mediated devices")
[aw: simplified logic, add Fixes]
---
 drivers/vfio/vfio_iommu_type1.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/vfio/vfio_iommu_type1.c +2 -1
index d0438388feebe..9dde5ed852fd0 100644
@@ -693,7 +693,8 @@ static int vfio_iommu_type1_pin_pages(void *iommu_data,
 
 		ret = vfio_add_to_pfn_list(dma, iova, phys_pfn[i]);
 		if (ret) {
-			vfio_unpin_page_external(dma, iova, do_accounting);
+			if (put_pfn(phys_pfn[i], dma->prot) && do_accounting)
+				vfio_lock_acct(dma, -1, true);
 			goto pin_unwind;
 		}
 
Signature · 1 line
2.25.1
author maintainer
#556 lore raw

PATCH 556/757 clk: qcom: gdsc: Keep RETAIN_FF bit set if gdsc is already on

In reply to Greg Kroah-Hartman

From: Stephen Boyd <[email protected]>

[ Upstream commit fda48bf5c86d88fd7074e318f290ad636dff4eaa ]

If the GDSC is enabled out of boot but doesn't have the retain ff bit set we will get confusing results where the registers that are powered by the GDSC lose their contents on the first power off of the GDSC but thereafter they retain their contents. This is because gdsc_init() fails to make sure the RETAIN_FF bit is set when it probes the GDSC the first time and thus powering off the GDSC causes the register contents to be reset. We do set the RETAIN_FF bit the next time we power on the GDSC, see gdsc_enable(), so that subsequent GDSC power off's don't lose register contents state.

Forcibly set the bit at device probe time so that the kernel's assumed view of the GDSC is consistent with the state of the hardware. This fixes a problem where the audio PLL doesn't work on sc7180 when the bootloader leaves the lpass_core_hm GDSC enabled at boot (e.g. to make a noise) but critically doesn't set the RETAIN_FF bit.

Cc Douglas Anderson <[email protected]>
Cc Taniya Das <[email protected]>
Cc Rajendra Nayak <[email protected]>
Fixes 173722995cdb ("clk: qcom: gdsc: Add support to enable retention of GSDCR")
---
 drivers/clk/qcom/gdsc.c | 8 ++++++++
 1 file changed, 8 insertions(+)
drivers/clk/qcom/gdsc.c +8 -0
index bfc4ac02f9ea2..af26e0695b866 100644
@@ -358,6 +358,14 @@ static int gdsc_init(struct gdsc *sc)
 	if ((sc->flags & VOTABLE) && on)
 		gdsc_enable(&sc->pd);
 
+	/*
+	 * Make sure the retain bit is set if the GDSC is already on, otherwise
+	 * we end up turning off the GDSC and destroying all the register
+	 * contents that we thought we were saving.
+	 */
+	if ((sc->flags & RETAIN_FF_ENABLE) && on)
+		gdsc_retain_ff_on(sc);
+
 	/* If ALWAYS_ON GDSCs are not ON, turn them ON */
 	if (sc->flags & ALWAYS_ON) {
 		if (!on)
Signature · 1 line
2.25.1
author maintainer
#557 lore raw

PATCH 557/757 clk: imx8mq: Fix usdhc parents order

In reply to Greg Kroah-Hartman

From: Abel Vesa <[email protected]>

[ Upstream commit b159c63d82ff8ffddc6c6f0eb881b113b36ecad7 ]

According to the latest RM (see Table 5-1. Clock Root Table), both usdhc root clocks have the parent order as follows:

000 - 25M_REF_CLK
001 - SYSTEM_PLL1_DIV2
010 - SYSTEM_PLL1_CLK
011 - SYSTEM_PLL2_DIV2
100 - SYSTEM_PLL3_CLK
101 - SYSTEM_PLL1_DIV3
110 - AUDIO_PLL2_CLK
111 - SYSTEM_PLL1_DIV8

So the audio_pll2_out and sys3_pll_out have to be swapped.

---
 drivers/clk/imx/clk-imx8mq.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/clk/imx/clk-imx8mq.c +2 -2
index a64aace213c27..7762c5825e77d 100644
@@ -157,10 +157,10 @@ static const char * const imx8mq_qspi_sels[] = {"osc_25m", "sys1_pll_400m", "sys
 					 "audio_pll2_out", "sys1_pll_266m", "sys3_pll_out", "sys1_pll_100m", };
 
 static const char * const imx8mq_usdhc1_sels[] = {"osc_25m", "sys1_pll_400m", "sys1_pll_800m", "sys2_pll_500m",
-					 "audio_pll2_out", "sys1_pll_266m", "sys3_pll_out", "sys1_pll_100m", };
+					 "sys3_pll_out", "sys1_pll_266m", "audio_pll2_out", "sys1_pll_100m", };
 
 static const char * const imx8mq_usdhc2_sels[] = {"osc_25m", "sys1_pll_400m", "sys1_pll_800m", "sys2_pll_500m",
-					 "audio_pll2_out", "sys1_pll_266m", "sys3_pll_out", "sys1_pll_100m", };
+					 "sys3_pll_out", "sys1_pll_266m", "audio_pll2_out", "sys1_pll_100m", };
 
 static const char * const imx8mq_i2c1_sels[] = {"osc_25m", "sys1_pll_160m", "sys2_pll_50m", "sys3_pll_out", "audio_pll1_out",
 					 "video_pll1_out", "audio_pll2_out", "sys1_pll_133m", };
Signature · 1 line
2.25.1
author maintainer
#558 lore raw

PATCH 558/757 SUNRPC: fix copying of multiple pages in gss_read_proxy_verf()

In reply to Greg Kroah-Hartman

From: Martijn de Gouw <[email protected]>

[ Upstream commit d48c8124749c9a5081fe68680f83605e272c984b ]

When the passed token is longer than 4032 bytes, the remaining part of the token must be copied from the rqstp->rq_arg.pages. But the copy must make sure it happens in a consecutive way.

With the existing code, the first memcpy copies 'length' bytes from argv->iobase, but since the header is in front, this never fills the whole first page of in_token->pages.

The mecpy in the loop copies the following bytes, but starts writing at the next page of in_token->pages. This leaves the last bytes of page 0 unwritten.

Symptoms were that users with many groups were not able to access NFS exports, when using Active Directory as the KDC.

Fixes 5866efa8cbfb "SUNRPC: Fix svcauth_gss_proxy_init()"
---
 net/sunrpc/auth_gss/svcauth_gss.c | 27 +++++++++++++++++----------
 1 file changed, 17 insertions(+), 10 deletions(-)
net/sunrpc/auth_gss/svcauth_gss.c +17 -10
index 258b04372f854..bd4678db9d76b 100644
@@ -1147,9 +1147,9 @@ static int gss_read_proxy_verf(struct svc_rqst *rqstp,
 			       struct gssp_in_token *in_token)
 {
 	struct kvec *argv = &rqstp->rq_arg.head[0];
-	unsigned int page_base, length;
-	int pages, i, res;
-	size_t inlen;
+	unsigned int length, pgto_offs, pgfrom_offs;
+	int pages, i, res, pgto, pgfrom;
+	size_t inlen, to_offs, from_offs;
 
 	res = gss_read_common_verf(gc, argv, authp, in_handle);
 	if (res)
@@ -1177,17 +1177,24 @@ static int gss_read_proxy_verf(struct svc_rqst *rqstp,
 	memcpy(page_address(in_token->pages[0]), argv->iov_base, length);
 	inlen -= length;
 
-	i = 1;
-	page_base = rqstp->rq_arg.page_base;
+	to_offs = length;
+	from_offs = rqstp->rq_arg.page_base;
 	while (inlen) {
-		length = min_t(unsigned int, inlen, PAGE_SIZE);
-		memcpy(page_address(in_token->pages[i]),
-		       page_address(rqstp->rq_arg.pages[i]) + page_base,
+		pgto = to_offs >> PAGE_SHIFT;
+		pgfrom = from_offs >> PAGE_SHIFT;
+		pgto_offs = to_offs & ~PAGE_MASK;
+		pgfrom_offs = from_offs & ~PAGE_MASK;
+
+		length = min_t(unsigned int, inlen,
+			 min_t(unsigned int, PAGE_SIZE - pgto_offs,
+			       PAGE_SIZE - pgfrom_offs));
+		memcpy(page_address(in_token->pages[pgto]) + pgto_offs,
+		       page_address(rqstp->rq_arg.pages[pgfrom]) + pgfrom_offs,
 		       length);
 
+		to_offs += length;
+		from_offs += length;
 		inlen -= length;
-		page_base = 0;
-		i++;
 	}
 	return 0;
 }
Signature · 1 line
2.25.1
author maintainer
#559 lore raw

PATCH 559/757 NFSv4.2: Fix NFS4ERR_STALE error when doing inter server copy

In reply to Greg Kroah-Hartman

From: Dai Ngo <[email protected]>

[ Upstream commit 0cfcd405e758ba1d277e58436fb32f06888c3e41 ]

NFS_FS=y as dependency of CONFIG_NFSD_V4_2_INTER_SSC still have build errors and some configs with NFSD=m to get NFS4ERR_STALE error when doing inter server copy.

Added ops table in nfs_common for knfsd to access NFS client modules.

Fixes 3ac3711adb88 ("NFSD: Fix NFS server build errors")
---
 fs/nfs/nfs4file.c       | 38 ++++++++++++++---
 fs/nfs/nfs4super.c      |  5 +++
 fs/nfs/super.c          | 17 ++++++++
 fs/nfs_common/Makefile  |  1 +
 fs/nfs_common/nfs_ssc.c | 94 +++++++++++++++++++++++++++++++++++++++++
 fs/nfsd/Kconfig         |  2 +-
 fs/nfsd/nfs4proc.c      |  3 +-
 include/linux/nfs_ssc.h | 67 +++++++++++++++++++++++++++++
 8 files changed, 219 insertions(+), 8 deletions(-)
 create mode 100644 fs/nfs_common/nfs_ssc.c
 create mode 100644 include/linux/nfs_ssc.h
fs/nfs/nfs4file.c +32 -6
index fdfc77486acee..984938024011b 100644
@@ -9,6 +9,7 @@
 #include <linux/falloc.h>
 #include <linux/mount.h>
 #include <linux/nfs_fs.h>
+#include <linux/nfs_ssc.h>
 #include "delegation.h"
 #include "internal.h"
 #include "iostat.h"
@@ -314,9 +315,8 @@ static loff_t nfs42_remap_file_range(struct file *src_file, loff_t src_off,
 static int read_name_gen = 1;
 #define SSC_READ_NAME_BODY "ssc_read_%d"
 
-struct file *
-nfs42_ssc_open(struct vfsmount *ss_mnt, struct nfs_fh *src_fh,
-		nfs4_stateid *stateid)
+static struct file *__nfs42_ssc_open(struct vfsmount *ss_mnt,
+		struct nfs_fh *src_fh, nfs4_stateid *stateid)
 {
 	struct nfs_fattr fattr;
 	struct file *filep, *res;
@@ -398,14 +398,40 @@ nfs42_ssc_open(struct vfsmount *ss_mnt, struct nfs_fh *src_fh,
 	fput(filep);
 	goto out_free_name;
 }
-EXPORT_SYMBOL_GPL(nfs42_ssc_open);
-void nfs42_ssc_close(struct file *filep)
+
+static void __nfs42_ssc_close(struct file *filep)
 {
 	struct nfs_open_context *ctx = nfs_file_open_context(filep);
 
 	ctx->state->flags = 0;
 }
-EXPORT_SYMBOL_GPL(nfs42_ssc_close);
+
+static const struct nfs4_ssc_client_ops nfs4_ssc_clnt_ops_tbl = {
+	.sco_open = __nfs42_ssc_open,
+	.sco_close = __nfs42_ssc_close,
+};
+
+/**
+ * nfs42_ssc_register_ops - Wrapper to register NFS_V4 ops in nfs_common
+ *
+ * Return values:
+ *   None
+ */
+void nfs42_ssc_register_ops(void)
+{
+	nfs42_ssc_register(&nfs4_ssc_clnt_ops_tbl);
+}
+
+/**
+ * nfs42_ssc_unregister_ops - wrapper to un-register NFS_V4 ops in nfs_common
+ *
+ * Return values:
+ *   None.
+ */
+void nfs42_ssc_unregister_ops(void)
+{
+	nfs42_ssc_unregister(&nfs4_ssc_clnt_ops_tbl);
+}
 #endif /* CONFIG_NFS_V4_2 */
 
 const struct file_operations nfs4_file_operations = {
fs/nfs/nfs4super.c +5 -0
index 0c1ab846b83dd..93f5c1678ec29 100644
@@ -7,6 +7,7 @@
 #include <linux/mount.h>
 #include <linux/nfs4_mount.h>
 #include <linux/nfs_fs.h>
+#include <linux/nfs_ssc.h>
 #include "delegation.h"
 #include "internal.h"
 #include "nfs4_fs.h"
@@ -279,6 +280,9 @@ static int __init init_nfs_v4(void)
 	if (err)
 		goto out2;
 
+#ifdef CONFIG_NFS_V4_2
+	nfs42_ssc_register_ops();
+#endif
 	register_nfs_version(&nfs_v4);
 	return 0;
 out2:
@@ -297,6 +301,7 @@ static void __exit exit_nfs_v4(void)
 	unregister_nfs_version(&nfs_v4);
 #ifdef CONFIG_NFS_V4_2
 	nfs4_xattr_cache_exit();
+	nfs42_ssc_unregister_ops();
 #endif
 	nfs4_unregister_sysctl();
 	nfs_idmap_quit();
fs/nfs/super.c +17 -0
index 7a70287f21a2c..f7dad8227a5f4 100644
@@ -57,6 +57,7 @@
 #include <linux/rcupdate.h>
 
 #include <linux/uaccess.h>
+#include <linux/nfs_ssc.h>
 
 #include "nfs4_fs.h"
 #include "callback.h"
@@ -85,6 +86,10 @@ const struct super_operations nfs_sops = {
 };
 EXPORT_SYMBOL_GPL(nfs_sops);
 
+static const struct nfs_ssc_client_ops nfs_ssc_clnt_ops_tbl = {
+	.sco_sb_deactive = nfs_sb_deactive,
+};
+
 #if IS_ENABLED(CONFIG_NFS_V4)
 static int __init register_nfs4_fs(void)
 {
@@ -106,6 +111,16 @@ static void unregister_nfs4_fs(void)
 }
 #endif
 
+static void nfs_ssc_register_ops(void)
+{
+	nfs_ssc_register(&nfs_ssc_clnt_ops_tbl);
+}
+
+static void nfs_ssc_unregister_ops(void)
+{
+	nfs_ssc_unregister(&nfs_ssc_clnt_ops_tbl);
+}
+
 static struct shrinker acl_shrinker = {
 	.count_objects	= nfs_access_cache_count,
 	.scan_objects	= nfs_access_cache_scan,
@@ -133,6 +148,7 @@ int __init register_nfs_fs(void)
 	ret = register_shrinker(&acl_shrinker);
 	if (ret < 0)
 		goto error_3;
+	nfs_ssc_register_ops();
 	return 0;
 error_3:
 	nfs_unregister_sysctl();
@@ -152,6 +168,7 @@ void __exit unregister_nfs_fs(void)
 	unregister_shrinker(&acl_shrinker);
 	nfs_unregister_sysctl();
 	unregister_nfs4_fs();
+	nfs_ssc_unregister_ops();
 	unregister_filesystem(&nfs_fs_type);
 }
 
fs/nfs_common/Makefile +1 -0
index 4bebe834c0091..fa82f5aaa6d95 100644
@@ -7,3 +7,4 @@ obj-$(CONFIG_NFS_ACL_SUPPORT) += nfs_acl.o
 nfs_acl-objs := nfsacl.o
 
 obj-$(CONFIG_GRACE_PERIOD) += grace.o
+obj-$(CONFIG_GRACE_PERIOD) += nfs_ssc.o
fs/nfs_common/nfs_ssc.c new file +94 -0

94 lines not on this page · raw message

fs/nfsd/Kconfig +1 -1
index 99d2cae91bd68..f368f3215f88f 100644
@@ -136,7 +136,7 @@ config NFSD_FLEXFILELAYOUT
 
 config NFSD_V4_2_INTER_SSC
 	bool "NFSv4.2 inter server to server COPY"
-	depends on NFSD_V4 && NFS_V4_1 && NFS_V4_2 && NFS_FS=y
+	depends on NFSD_V4 && NFS_V4_1 && NFS_V4_2
 	help
 	  This option enables support for NFSv4.2 inter server to
 	  server copy where the destination server calls the NFSv4.2
fs/nfsd/nfs4proc.c +2 -1
index eaf50eafa9359..84e10aef14175 100644
@@ -38,6 +38,7 @@
 #include <linux/slab.h>
 #include <linux/kthread.h>
 #include <linux/sunrpc/addr.h>
+#include <linux/nfs_ssc.h>
 
 #include "idmap.h"
 #include "cache.h"
@@ -1247,7 +1248,7 @@ nfsd4_interssc_connect(struct nl4_server *nss, struct svc_rqst *rqstp,
 static void
 nfsd4_interssc_disconnect(struct vfsmount *ss_mnt)
 {
-	nfs_sb_deactive(ss_mnt->mnt_sb);
+	nfs_do_sb_deactive(ss_mnt->mnt_sb);
 	mntput(ss_mnt);
 }
 
include/linux/nfs_ssc.h new file +67 -0

67 lines not on this page · raw message

Signature · 1 line
2.25.1
author maintainer
#560 lore raw

PATCH 560/757 platform/chrome: cros_ec_typec: Send enum values to usb_role_switch_set_role()

In reply to Greg Kroah-Hartman

From: Azhar Shaikh <[email protected]>

[ Upstream commit 5381b0ed54b6af3c0e8184b43e34154e17904848 ]

usb_role_switch_set_role() has the second argument as enum for usb_role. Currently depending upon the data role i.e. UFP(0) or DFP(1) is sent. This eventually translates to USB_ROLE_NONE in case of UFP and USB_ROLE_DEVICE in case of DFP. Correct this by sending correct enum values as USB_ROLE_DEVICE in case of UFP and USB_ROLE_HOST in case of DFP.

Fixes 7e7def15fa4b ("platform/chrome: cros_ec_typec: Add USB mux control")
Cc Prashant Malani <[email protected]>
---
 drivers/platform/chrome/cros_ec_typec.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/platform/chrome/cros_ec_typec.c +2 -1
index 3fcd27ec9ad8f..10ef1fc75c0e1 100644
@@ -591,7 +591,8 @@ static int cros_typec_port_update(struct cros_typec_data *typec, int port_num)
 		dev_warn(typec->dev, "Configure muxes failed, err = %d\n", ret);
 
 	return usb_role_switch_set_role(typec->ports[port_num]->role_sw,
-					!!(resp.role & PD_CTRL_RESP_ROLE_DATA));
+					resp.role & PD_CTRL_RESP_ROLE_DATA
+					? USB_ROLE_HOST : USB_ROLE_DEVICE);
 }
 
 static int cros_typec_get_cmd_version(struct cros_typec_data *typec)
Signature · 1 line
2.25.1
author maintainer
#561 lore raw

PATCH 561/757 platform/chrome: cros_ec_lightbar: Reduce ligthbar get version command

In reply to Greg Kroah-Hartman

From: Gwendal Grignou <[email protected]>

[ Upstream commit 1e7913ff5f9f1b73146ad8522958bd266f22a510 ]

By default, the lightbar commands are set to the biggest lightbar command and response. That length is greater than 128 bytes and may not work on all machines. But all EC are probed for lightbar by sending a get version request. Set that request size precisely.

Before the command would be:

cros_ec_cmd: version: 0, command: EC_CMD_LIGHTBAR_CMD, outsize: 194, insize: 128, result: 0

Afer:

cros_ec_cmd: version: 0, command: EC_CMD_LIGHTBAR_CMD, outsize: 1, insize: 8, result: 0

Fixes a841178445bb7 ("mfd: cros_ec: Use a zero-length array for command data")
---
 drivers/platform/chrome/cros_ec_lightbar.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/platform/chrome/cros_ec_lightbar.c +2 -0
index b59180bff5a3e..ef61298c30bdd 100644
@@ -116,6 +116,8 @@ static int get_lightbar_version(struct cros_ec_dev *ec,
 
 	param = (struct ec_params_lightbar *)msg->data;
 	param->cmd = LIGHTBAR_CMD_VERSION;
+	msg->outsize = sizeof(param->cmd);
+	msg->result = sizeof(resp->version);
 	ret = cros_ec_cmd_xfer_status(ec->ec_dev, msg);
 	if (ret < 0) {
 		ret = 0;
Signature · 1 line
2.25.1
author maintainer
#562 lore raw

PATCH 562/757 Input: elants_i2c - fix typo for an attribute to show calibration count

In reply to Greg Kroah-Hartman

From: Johnny Chuang <[email protected]>

[ Upstream commit 93f634069707cfe562c38739f5062feccbe9a834 ]

Fixed typo for command from 0xE0 to 0xD0.

Fixes cf520c643012 ("Input: elants_i2c - provide an attribute to show calibration count")
---
 drivers/input/touchscreen/elants_i2c.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/input/touchscreen/elants_i2c.c +1 -1
index b0bd5bb079bec..75b39ef39b743 100644
@@ -90,7 +90,7 @@
 /* FW read command, 0x53 0x?? 0x0, 0x01 */
 #define E_ELAN_INFO_FW_VER	0x00
 #define E_ELAN_INFO_BC_VER	0x10
-#define E_ELAN_INFO_REK		0xE0
+#define E_ELAN_INFO_REK		0xD0
 #define E_ELAN_INFO_TEST_VER	0xE0
 #define E_ELAN_INFO_FW_ID	0xF0
 #define E_INFO_OSR		0xD6
Signature · 1 line
2.25.1
author maintainer
#563 lore raw

PATCH 563/757 Input: imx6ul_tsc - clean up some errors in imx6ul_tsc_resume()

In reply to Greg Kroah-Hartman

From: Dan Carpenter <[email protected]>

[ Upstream commit 30df23c5ecdfb8da5b0bc17ceef67eff9e1b0957 ]

If imx6ul_tsc_init() fails then we need to clean up the clocks.

I reversed the "if (input_dev->users) {" condition to make the code a bit simpler.

---
 drivers/input/touchscreen/imx6ul_tsc.c | 27 +++++++++++++++-----------
 1 file changed, 16 insertions(+), 11 deletions(-)
drivers/input/touchscreen/imx6ul_tsc.c +16 -11
index 9ed258854349b..5e6ba5c4eca2a 100644
@@ -530,20 +530,25 @@ static int __maybe_unused imx6ul_tsc_resume(struct device *dev)
 
 	mutex_lock(&input_dev->mutex);
 
-	if (input_dev->users) {
-		retval = clk_prepare_enable(tsc->adc_clk);
-		if (retval)
-			goto out;
-
-		retval = clk_prepare_enable(tsc->tsc_clk);
-		if (retval) {
-			clk_disable_unprepare(tsc->adc_clk);
-			goto out;
-		}
+	if (!input_dev->users)
+		goto out;
 
-		retval = imx6ul_tsc_init(tsc);
+	retval = clk_prepare_enable(tsc->adc_clk);
+	if (retval)
+		goto out;
+
+	retval = clk_prepare_enable(tsc->tsc_clk);
+	if (retval) {
+		clk_disable_unprepare(tsc->adc_clk);
+		goto out;
 	}
 
+	retval = imx6ul_tsc_init(tsc);
+	if (retval) {
+		clk_disable_unprepare(tsc->tsc_clk);
+		clk_disable_unprepare(tsc->adc_clk);
+		goto out;
+	}
 out:
 	mutex_unlock(&input_dev->mutex);
 	return retval;
Signature · 1 line
2.25.1
author maintainer
#564 lore raw

PATCH 564/757 Input: stmfts - fix a & vs && typo

In reply to Greg Kroah-Hartman

From: YueHaibing <[email protected]>

[ Upstream commit d04afe14b23651e7a8bc89727a759e982a8458e4 ]

In stmfts_sysfs_hover_enable_write(), we should check value and sdata->hover_enabled is all true.

Fixes 78bcac7b2ae1 ("Input: add support for the STMicroelectronics FingerTip touchscreen")
---
 drivers/input/touchscreen/stmfts.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/input/touchscreen/stmfts.c +1 -1
index df946869d4cd1..9a64e1dbc04ad 100644
@@ -479,7 +479,7 @@ static ssize_t stmfts_sysfs_hover_enable_write(struct device *dev,
 
 	mutex_lock(&sdata->mutex);
 
-	if (value & sdata->hover_enabled)
+	if (value && sdata->hover_enabled)
 		goto out;
 
 	if (sdata->running)
Signature · 1 line
2.25.1
author maintainer
#565 lore raw

PATCH 565/757 Input: ep93xx_keypad - fix handling of platform_get_irq() error

In reply to Greg Kroah-Hartman

From: Krzysztof Kozlowski <[email protected]>

[ Upstream commit 7d50f6656dacf085a00beeedbc48b19a37d17881 ]

platform_get_irq() returns -ERRNO on error. In such case comparison to 0 would pass the check.

Fixes 60214f058f44 ("Input: ep93xx_keypad - update driver to new core support")
---
 drivers/input/keyboard/ep93xx_keypad.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/input/keyboard/ep93xx_keypad.c +2 -2
index 7c70492d9d6b5..f831f01501d58 100644
@@ -250,8 +250,8 @@ static int ep93xx_keypad_probe(struct platform_device *pdev)
 	}
 
 	keypad->irq = platform_get_irq(pdev, 0);
-	if (!keypad->irq) {
-		err = -ENXIO;
+	if (keypad->irq < 0) {
+		err = keypad->irq;
 		goto failed_free;
 	}
 
Signature · 1 line
2.25.1
author maintainer
#566 lore raw

PATCH 566/757 Input: omap4-keypad - fix handling of platform_get_irq() error

In reply to Greg Kroah-Hartman

From: Krzysztof Kozlowski <[email protected]>

[ Upstream commit 4738dd1992fa13acfbbd71800c71c612f466fa44 ]

platform_get_irq() returns -ERRNO on error. In such case comparison to 0 would pass the check.

Fixes f3a1ba60dbdb ("Input: omap4-keypad - use platform device helpers")
---
 drivers/input/keyboard/omap4-keypad.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)
drivers/input/keyboard/omap4-keypad.c +2 -4
index 94c94d7f5155f..d6c924032aaa8 100644
@@ -240,10 +240,8 @@ static int omap4_keypad_probe(struct platform_device *pdev)
 	}
 
 	irq = platform_get_irq(pdev, 0);
-	if (!irq) {
-		dev_err(&pdev->dev, "no keyboard irq assigned\n");
-		return -EINVAL;
-	}
+	if (irq < 0)
+		return irq;
 
 	keypad_data = kzalloc(sizeof(struct omap4_keypad), GFP_KERNEL);
 	if (!keypad_data) {
Signature · 1 line
2.25.1
author maintainer
#567 lore raw

PATCH 567/757 Input: twl4030_keypad - fix handling of platform_get_irq() error

In reply to Greg Kroah-Hartman

From: Krzysztof Kozlowski <[email protected]>

[ Upstream commit c277e1f0dc3c7d7b5b028e20dd414df241642036 ]

platform_get_irq() returns -ERRNO on error. In such case casting to unsigned and comparing to 0 would pass the check.

---
 drivers/input/keyboard/twl4030_keypad.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)
drivers/input/keyboard/twl4030_keypad.c +3 -5
index af3a6824f1a4d..77e0743a3cf85 100644
@@ -50,7 +50,7 @@ struct twl4030_keypad {
 	bool		autorepeat;
 	unsigned int	n_rows;
 	unsigned int	n_cols;
-	unsigned int	irq;
+	int		irq;
 
 	struct device *dbg_dev;
 	struct input_dev *input;
@@ -376,10 +376,8 @@ static int twl4030_kp_probe(struct platform_device *pdev)
 	}
 
 	kp->irq = platform_get_irq(pdev, 0);
-	if (!kp->irq) {
-		dev_err(&pdev->dev, "no keyboard irq assigned\n");
-		return -EINVAL;
-	}
+	if (kp->irq < 0)
+		return kp->irq;
 
 	error = matrix_keypad_build_keymap(keymap_data, NULL,
 					   TWL4030_MAX_ROWS,
Signature · 1 line
2.25.1
author maintainer
#568 lore raw

PATCH 568/757 Input: sun4i-ps2 - fix handling of platform_get_irq() error

In reply to Greg Kroah-Hartman

From: Krzysztof Kozlowski <[email protected]>

[ Upstream commit cafb3abea6136e59ea534004e5773361e196bb94 ]

platform_get_irq() returns -ERRNO on error. In such case comparison to 0 would pass the check.

Fixes e443631d20f5 ("Input: serio - add support for Alwinner A10/A20 PS/2 controller")
---
 drivers/input/serio/sun4i-ps2.c | 9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)
drivers/input/serio/sun4i-ps2.c +3 -6
index a681a2c04e399..f15ed3dcdb9b2 100644
@@ -211,7 +211,6 @@ static int sun4i_ps2_probe(struct platform_device *pdev)
 	struct sun4i_ps2data *drvdata;
 	struct serio *serio;
 	struct device *dev = &pdev->dev;
-	unsigned int irq;
 	int error;
 
 	drvdata = kzalloc(sizeof(struct sun4i_ps2data), GFP_KERNEL);
@@ -264,14 +263,12 @@ static int sun4i_ps2_probe(struct platform_device *pdev)
 	writel(0, drvdata->reg_base + PS2_REG_GCTL);
 
 	/* Get IRQ for the device */
-	irq = platform_get_irq(pdev, 0);
-	if (!irq) {
-		dev_err(dev, "no IRQ found\n");
-		error = -ENXIO;
+	drvdata->irq = platform_get_irq(pdev, 0);
+	if (drvdata->irq < 0) {
+		error = drvdata->irq;
 		goto err_disable_clk;
 	}
 
-	drvdata->irq = irq;
 	drvdata->serio = serio;
 	drvdata->dev = dev;
 
Signature · 1 line
2.25.1
author maintainer
#569 lore raw

PATCH 569/757 KVM: x86: emulating RDPID failure shall return #UD rather than #GP

In reply to Greg Kroah-Hartman

From: Robert Hoo <[email protected]>

[ Upstream commit a9e2e0ae686094571378c72d8146b5a1a92d0652 ]

Per Intel's SDM, RDPID takes a #UD if it is unsupported, which is more or less what KVM is emulating when MSR_TSC_AUX is not available. In fact, there are no scenarios in which RDPID is supposed to #GP.

Fixes fb6d4d340e ("KVM: x86: emulate RDPID")

Message-Id: <[email protected]>

---
 arch/x86/kvm/emulate.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/x86/kvm/emulate.c +1 -1
index 2f6510de6b0c0..85111cd0adcd0 100644
@@ -3606,7 +3606,7 @@ static int em_rdpid(struct x86_emulate_ctxt *ctxt)
 	u64 tsc_aux = 0;
 
 	if (ctxt->ops->get_msr(ctxt, MSR_TSC_AUX, &tsc_aux))
-		return emulate_gp(ctxt, 0);
+		return emulate_ud(ctxt);
 	ctxt->dst.val = tsc_aux;
 	return X86EMUL_CONTINUE;
 }
Signature · 1 line
2.25.1
author maintainer
#570 lore raw

PATCH 570/757 KVM: nSVM: CR3 MBZ bits are only 63:52

In reply to Greg Kroah-Hartman

From: Krish Sadhukhan <[email protected]>

[ Upstream commit fb0f33fdefe9f473dc5f7b71345096c8d60ab9dd ]

Commit 761e4169346553c180bbd4a383aedd72f905bc9a created a wrong mask for the CR3 MBZ bits. According to APM vol 2, only the upper 12 bits are MBZ.

Fixes 761e41693465 ("KVM: nSVM: Check that MBZ bits in CR3 and CR4 are not set on vmrun of nested guests", 2020-07-08)

Message-Id: <[email protected]>

---
 arch/x86/kvm/svm/nested.c | 2 +-
 arch/x86/kvm/svm/svm.h    | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)
arch/x86/kvm/svm/nested.c +1 -1
index e90bc436f5849..27042c9ea40d6 100644
@@ -243,7 +243,7 @@ static bool nested_vmcb_checks(struct vcpu_svm *svm, struct vmcb *vmcb)
 	} else {
 		if (!(vmcb->save.cr4 & X86_CR4_PAE) ||
 		    !(vmcb->save.cr0 & X86_CR0_PE) ||
-		    (vmcb->save.cr3 & MSR_CR3_LONG_RESERVED_MASK))
+		    (vmcb->save.cr3 & MSR_CR3_LONG_MBZ_MASK))
 			return false;
 	}
 	if (kvm_valid_cr4(&svm->vcpu, vmcb->save.cr4))
arch/x86/kvm/svm/svm.h +1 -1
index a798e17317094..c0d75b1e06645 100644
@@ -345,7 +345,7 @@ static inline bool gif_set(struct vcpu_svm *svm)
 /* svm.c */
 #define MSR_CR3_LEGACY_RESERVED_MASK		0xfe7U
 #define MSR_CR3_LEGACY_PAE_RESERVED_MASK	0x7U
-#define MSR_CR3_LONG_RESERVED_MASK		0xfff0000000000fe7U
+#define MSR_CR3_LONG_MBZ_MASK			0xfff0000000000000U
 #define MSR_INVALID				0xffffffffU
 
 u32 svm_msrpm_offset(u32 msr);
Signature · 1 line
2.25.1
author maintainer
#571 lore raw

PATCH 571/757 scsi: bfa: Fix error return in bfad_pci_init()

In reply to Greg Kroah-Hartman

From: Jing Xiangfeng <[email protected]>

[ Upstream commit f0f6c3a4fcb80fcbcce4ff6739996dd98c228afd ]

Fix to return error code -ENODEV from the error handling case instead of 0.

Fixes 11ea3824140c ("scsi: bfa: fix calls to dma_set_mask_and_coherent()")
---
 drivers/scsi/bfa/bfad.c | 1 +
 1 file changed, 1 insertion(+)
drivers/scsi/bfa/bfad.c +1 -0
index bc5d84f87d8fc..440ef32be048f 100644
@@ -749,6 +749,7 @@ bfad_pci_init(struct pci_dev *pdev, struct bfad_s *bfad)
 
 	if (bfad->pci_bar0_kva == NULL) {
 		printk(KERN_ERR "Fail to map bar0\n");
+		rc = -ENODEV;
 		goto out_release_region;
 	}
 
Signature · 1 line
2.25.1
author maintainer
#572 lore raw

PATCH 572/757 arm64: mm: use single quantity to represent the PA to VA translation

In reply to Greg Kroah-Hartman

From: Ard Biesheuvel <[email protected]>

[ Upstream commit 7bc1a0f9e1765830e945669c99c59c35cf9bca82 ]

On arm64, the global variable memstart_addr represents the physical address of PAGE_OFFSET, and so physical to virtual translations or vice versa used to come down to simple additions or subtractions involving the values of PAGE_OFFSET and memstart_addr.

When support for 52-bit virtual addressing was introduced, we had to deal with PAGE_OFFSET potentially being outside of the region that can be covered by the virtual range (as the 52-bit VA capable build needs to be able to run on systems that are only 48-bit VA capable), and for this reason, another translation was introduced, and recorded in the global variable physvirt_offset.

However, if we go back to the original definition of memstart_addr, i.e., the physical address of PAGE_OFFSET, it turns out that there is no need for two separate translations: instead, we can simply subtract the size of the unaddressable VA space from memstart_addr to make the available physical memory appear in the 48-bit addressable VA region.

This simplifies things, but also fixes a bug on KASLR builds, which may update memstart_addr later on in arm64_memblock_init(), but fails to update vmemmap and physvirt_offset accordingly.

---
 arch/arm64/include/asm/memory.h  |  5 ++---
 arch/arm64/include/asm/pgtable.h |  4 ++--
 arch/arm64/mm/init.c             | 30 ++++++++++--------------------
 3 files changed, 14 insertions(+), 25 deletions(-)
arch/arm64/include/asm/memory.h +2 -3
index afa722504bfde..1ded73189874d 100644
@@ -164,7 +164,6 @@
 extern u64			vabits_actual;
 #define PAGE_END		(_PAGE_END(vabits_actual))
 
-extern s64			physvirt_offset;
 extern s64			memstart_addr;
 /* PHYS_OFFSET - the physical address of the start of memory. */
 #define PHYS_OFFSET		({ VM_BUG_ON(memstart_addr & 1); memstart_addr; })
@@ -240,7 +239,7 @@ static inline const void *__tag_set(const void *addr, u8 tag)
  */
 #define __is_lm_address(addr)	(!(((u64)addr) & BIT(vabits_actual - 1)))
 
-#define __lm_to_phys(addr)	(((addr) + physvirt_offset))
+#define __lm_to_phys(addr)	(((addr) & ~PAGE_OFFSET) + PHYS_OFFSET)
 #define __kimg_to_phys(addr)	((addr) - kimage_voffset)
 
 #define __virt_to_phys_nodebug(x) ({					\
@@ -258,7 +257,7 @@ extern phys_addr_t __phys_addr_symbol(unsigned long x);
 #define __phys_addr_symbol(x)	__pa_symbol_nodebug(x)
 #endif /* CONFIG_DEBUG_VIRTUAL */
 
-#define __phys_to_virt(x)	((unsigned long)((x) - physvirt_offset))
+#define __phys_to_virt(x)	((unsigned long)((x) - PHYS_OFFSET) | PAGE_OFFSET)
 #define __phys_to_kimg(x)	((unsigned long)((x) + kimage_voffset))
 
 /*
arch/arm64/include/asm/pgtable.h +2 -2
index d5d3fbe739534..88233d42d9c29 100644
@@ -23,6 +23,8 @@
 #define VMALLOC_START		(MODULES_END)
 #define VMALLOC_END		(- PUD_SIZE - VMEMMAP_SIZE - SZ_64K)
 
+#define vmemmap			((struct page *)VMEMMAP_START - (memstart_addr >> PAGE_SHIFT))
+
 #define FIRST_USER_ADDRESS	0UL
 
 #ifndef __ASSEMBLY__
@@ -33,8 +35,6 @@
 #include <linux/mm_types.h>
 #include <linux/sched.h>
 
-extern struct page *vmemmap;
-
 extern void __pte_error(const char *file, int line, unsigned long val);
 extern void __pmd_error(const char *file, int line, unsigned long val);
 extern void __pud_error(const char *file, int line, unsigned long val);
arch/arm64/mm/init.c +10 -20
index 481d22c32a2e7..324f0e0894f6e 100644
@@ -54,12 +54,6 @@
 s64 memstart_addr __ro_after_init = -1;
 EXPORT_SYMBOL(memstart_addr);
 
-s64 physvirt_offset __ro_after_init;
-EXPORT_SYMBOL(physvirt_offset);
-
-struct page *vmemmap __ro_after_init;
-EXPORT_SYMBOL(vmemmap);
-
 /*
  * We create both ZONE_DMA and ZONE_DMA32. ZONE_DMA covers the first 1G of
  * memory as some devices, namely the Raspberry Pi 4, have peripherals with
@@ -290,20 +284,6 @@ void __init arm64_memblock_init(void)
 	memstart_addr = round_down(memblock_start_of_DRAM(),
 				   ARM64_MEMSTART_ALIGN);
 
-	physvirt_offset = PHYS_OFFSET - PAGE_OFFSET;
-
-	vmemmap = ((struct page *)VMEMMAP_START - (memstart_addr >> PAGE_SHIFT));
-
-	/*
-	 * If we are running with a 52-bit kernel VA config on a system that
-	 * does not support it, we have to offset our vmemmap and physvirt_offset
-	 * s.t. we avoid the 52-bit portion of the direct linear map
-	 */
-	if (IS_ENABLED(CONFIG_ARM64_VA_BITS_52) && (vabits_actual != 52)) {
-		vmemmap += (_PAGE_OFFSET(48) - _PAGE_OFFSET(52)) >> PAGE_SHIFT;
-		physvirt_offset = PHYS_OFFSET - _PAGE_OFFSET(48);
-	}
-
 	/*
 	 * Remove the memory that we will not be able to cover with the
 	 * linear mapping. Take care not to clip the kernel which may be
@@ -318,6 +298,16 @@ void __init arm64_memblock_init(void)
 		memblock_remove(0, memstart_addr);
 	}
 
+	/*
+	 * If we are running with a 52-bit kernel VA config on a system that
+	 * does not support it, we have to place the available physical
+	 * memory in the 48-bit addressable part of the linear region, i.e.,
+	 * we have to move it upward. Since memstart_addr represents the
+	 * physical address of PAGE_OFFSET, we have to *subtract* from it.
+	 */
+	if (IS_ENABLED(CONFIG_ARM64_VA_BITS_52) && (vabits_actual != 52))
+		memstart_addr -= _PAGE_OFFSET(48) - _PAGE_OFFSET(52);
+
 	/*
 	 * Apply the memory limit if it was set. Since the kernel may be loaded
 	 * high up in memory, add back the kernel region that must be accessible
Signature · 1 line
2.25.1
author maintainer
#573 lore raw

PATCH 573/757 bpf: Enforce id generation for all may-be-null register type

In reply to Greg Kroah-Hartman

From: Martin KaFai Lau <[email protected]>

[ Upstream commit 93c230e3f5bd6e1d2b2759d582fdfe9c2731473b ]

The commit af7ec1383361 ("bpf: Add bpf_skc_to_tcp6_sock() helper") introduces RET_PTR_TO_BTF_ID_OR_NULL and
the commit eaa6bcb71ef6 ("bpf: Introduce bpf_per_cpu_ptr()") introduces RET_PTR_TO_MEM_OR_BTF_ID_OR_NULL.
Note that for RET_PTR_TO_MEM_OR_BTF_ID_OR_NULL, the reg0->type could become PTR_TO_MEM_OR_NULL which is not covered by BPF_PROBE_MEM.

The BPF_REG_0 will then hold a _OR_NULL pointer type. This _OR_NULL pointer type requires the bpf program to explicitly do a NULL check first. After NULL check, the verifier will mark all registers having the same reg->id as safe to use. However, the reg->id
is not set for those new _OR_NULL return types. One of the ways that may be wrong is, checking NULL for one btf_id typed pointer will end up validating all other btf_id typed pointers because
all of them have id == 0. The later tests will exercise
this path.

To fix it and also avoid similar issue in the future, this patch moves the id generation logic out of each individual RET type test in check_helper_call(). Instead, it does one reg_type_may_be_null() test and then do the id generation if needed.

This patch also adds a WARN_ON_ONCE in mark_ptr_or_null_reg() to catch future breakage.

The _OR_NULL pointer usage in the bpf_iter_reg.ctx_arg_info is fine because it just happens that the existing id generation after check_ctx_access() has covered it. It is also using the reg_type_may_be_null() to decide if id generation is needed or not.

Fixes af7ec1383361 ("bpf: Add bpf_skc_to_tcp6_sock() helper")
Fixes eaa6bcb71ef6 ("bpf: Introduce bpf_per_cpu_ptr()")
---
 kernel/bpf/verifier.c | 11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)
kernel/bpf/verifier.c +5 -6
index 5b9d2cf06fc6b..c38ebc9af9468 100644
@@ -4885,24 +4885,19 @@ static int check_helper_call(struct bpf_verifier_env *env, int func_id, int insn
 				regs[BPF_REG_0].id = ++env->id_gen;
 		} else {
 			regs[BPF_REG_0].type = PTR_TO_MAP_VALUE_OR_NULL;
-			regs[BPF_REG_0].id = ++env->id_gen;
 		}
 	} else if (fn->ret_type == RET_PTR_TO_SOCKET_OR_NULL) {
 		mark_reg_known_zero(env, regs, BPF_REG_0);
 		regs[BPF_REG_0].type = PTR_TO_SOCKET_OR_NULL;
-		regs[BPF_REG_0].id = ++env->id_gen;
 	} else if (fn->ret_type == RET_PTR_TO_SOCK_COMMON_OR_NULL) {
 		mark_reg_known_zero(env, regs, BPF_REG_0);
 		regs[BPF_REG_0].type = PTR_TO_SOCK_COMMON_OR_NULL;
-		regs[BPF_REG_0].id = ++env->id_gen;
 	} else if (fn->ret_type == RET_PTR_TO_TCP_SOCK_OR_NULL) {
 		mark_reg_known_zero(env, regs, BPF_REG_0);
 		regs[BPF_REG_0].type = PTR_TO_TCP_SOCK_OR_NULL;
-		regs[BPF_REG_0].id = ++env->id_gen;
 	} else if (fn->ret_type == RET_PTR_TO_ALLOC_MEM_OR_NULL) {
 		mark_reg_known_zero(env, regs, BPF_REG_0);
 		regs[BPF_REG_0].type = PTR_TO_MEM_OR_NULL;
-		regs[BPF_REG_0].id = ++env->id_gen;
 		regs[BPF_REG_0].mem_size = meta.mem_size;
 	} else if (fn->ret_type == RET_PTR_TO_BTF_ID_OR_NULL) {
 		int ret_btf_id;
@@ -4922,6 +4917,9 @@ static int check_helper_call(struct bpf_verifier_env *env, int func_id, int insn
 		return -EINVAL;
 	}
 
+	if (reg_type_may_be_null(regs[BPF_REG_0].type))
+		regs[BPF_REG_0].id = ++env->id_gen;
+
 	if (is_ptr_cast_function(func_id)) {
 		/* For release_reference() */
 		regs[BPF_REG_0].ref_obj_id = meta.ref_obj_id;
@@ -6847,7 +6845,8 @@ static void mark_ptr_or_null_reg(struct bpf_func_state *state,
 				 struct bpf_reg_state *reg, u32 id,
 				 bool is_null)
 {
-	if (reg_type_may_be_null(reg->type) && reg->id == id) {
+	if (reg_type_may_be_null(reg->type) && reg->id == id &&
+	    !WARN_ON_ONCE(!reg->id)) {
 		/* Old offset (both fixed and variable parts) should
 		 * have been known-zero, because we don't allow pointer
 		 * arithmetic on pointers that might be NULL.
Signature · 1 line
2.25.1
author maintainer
#574 lore raw

PATCH 574/757 net: dsa: seville: the packet buffer is 2 megabits, not megabytes

In reply to Greg Kroah-Hartman

From: Maxim Kochetkov <[email protected]>

[ Upstream commit a15a6afb3bf9388eb83a4b876d3453f305fba909 ]

The VSC9953 Seville switch has 2 megabits of buffer split into 4360 words of 60 bytes each. 2048 * 1024 is 2 megabytes instead of 2 megabits. 2 megabits is (2048 / 8) * 1024 = 256 * 1024.

Fixes a63ed92d217f ("net: dsa: seville: fix buffer size of the queue system")
---
 drivers/net/dsa/ocelot/seville_vsc9953.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/dsa/ocelot/seville_vsc9953.c +1 -1
index 9e9fd19e1d00c..e2cd49eec0370 100644
@@ -1010,7 +1010,7 @@ static const struct felix_info seville_info_vsc9953 = {
 	.vcap_is2_keys		= vsc9953_vcap_is2_keys,
 	.vcap_is2_actions	= vsc9953_vcap_is2_actions,
 	.vcap			= vsc9953_vcap_props,
-	.shared_queue_sz	= 2048 * 1024,
+	.shared_queue_sz	= 256 * 1024,
 	.num_mact_rows		= 2048,
 	.num_ports		= 10,
 	.mdio_bus_alloc		= vsc9953_mdio_bus_alloc,
Signature · 1 line
2.25.1
author maintainer
#575 lore raw

PATCH 575/757 netfilter: conntrack: connection timeout after re-register

In reply to Greg Kroah-Hartman

From: Francesco Ruggeri <[email protected]>

[ Upstream commit 4f25434bccc28cf8a07876ef5142a2869a674353 ]

If the first packet conntrack sees after a re-register is an outgoing keepalive packet with no data (SEG.SEQ = SND.NXT-1), td_end is set to SND.NXT-1.
When the peer correctly acknowledges SND.NXT, tcp_in_window fails check III (Upper bound for valid (s)ack: sack <= receiver.td_end) and returns false, which cascades into nf_conntrack_in setting skb->_nfct = 0 and in later conntrack iptables rules not matching. In cases where iptables are dropping packets that do not match conntrack rules this can result in idle tcp connections to time out.

v2: adjust td_end when getting the reply rather than when sending out
the keepalive packet.

Fixes f94e63801ab2 ("netfilter: conntrack: reset tcp maxwin on re-register")
---
 net/netfilter/nf_conntrack_proto_tcp.c | 19 +++++++++++++------
 1 file changed, 13 insertions(+), 6 deletions(-)
net/netfilter/nf_conntrack_proto_tcp.c +13 -6
index e8c86ee4c1c48..c8fb2187ad4b2 100644
@@ -541,13 +541,20 @@ static bool tcp_in_window(const struct nf_conn *ct,
 			swin = win << sender->td_scale;
 			sender->td_maxwin = (swin == 0 ? 1 : swin);
 			sender->td_maxend = end + sender->td_maxwin;
-			/*
-			 * We haven't seen traffic in the other direction yet
-			 * but we have to tweak window tracking to pass III
-			 * and IV until that happens.
-			 */
-			if (receiver->td_maxwin == 0)
+			if (receiver->td_maxwin == 0) {
+				/* We haven't seen traffic in the other
+				 * direction yet but we have to tweak window
+				 * tracking to pass III and IV until that
+				 * happens.
+				 */
 				receiver->td_end = receiver->td_maxend = sack;
+			} else if (sack == receiver->td_end + 1) {
+				/* Likely a reply to a keepalive.
+				 * Needed for III.
+				 */
+				receiver->td_end++;
+			}
+
 		}
 	} else if (((state->state == TCP_CONNTRACK_SYN_SENT
 		     && dir == IP_CT_DIR_ORIGINAL)
Signature · 1 line
2.25.1
author maintainer
#576 lore raw

PATCH 576/757 netfilter: ebtables: Fixes dropping of small packets in bridge nat

In reply to Greg Kroah-Hartman

From: Timothée COCAULT <[email protected]>

[ Upstream commit 63137bc5882a1882c553d389fdeeeace86ee1741 ]

Fixes an error causing small packets to get dropped. skb_ensure_writable expects the second parameter to be a length in the ethernet payload.=20 If we want to write the ethernet header (src, dst), we should pass 0. Otherwise, packets with small payloads (< ETH_ALEN) will get dropped.

Fixes c1a831167901 ("netfilter: bridge: convert skb_make_writable to skb_ensure_writable")
---
 net/bridge/netfilter/ebt_dnat.c     | 2 +-
 net/bridge/netfilter/ebt_redirect.c | 2 +-
 net/bridge/netfilter/ebt_snat.c     | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)
net/bridge/netfilter/ebt_dnat.c +1 -1
index 12a4f4d936810..3fda71a8579d1 100644
@@ -21,7 +21,7 @@ ebt_dnat_tg(struct sk_buff *skb, const struct xt_action_param *par)
 {
 	const struct ebt_nat_info *info = par->targinfo;
 
-	if (skb_ensure_writable(skb, ETH_ALEN))
+	if (skb_ensure_writable(skb, 0))
 		return EBT_DROP;
 
 	ether_addr_copy(eth_hdr(skb)->h_dest, info->mac);
net/bridge/netfilter/ebt_redirect.c +1 -1
index 0cad62a4052b9..307790562b492 100644
@@ -21,7 +21,7 @@ ebt_redirect_tg(struct sk_buff *skb, const struct xt_action_param *par)
 {
 	const struct ebt_redirect_info *info = par->targinfo;
 
-	if (skb_ensure_writable(skb, ETH_ALEN))
+	if (skb_ensure_writable(skb, 0))
 		return EBT_DROP;
 
 	if (xt_hooknum(par) != NF_BR_BROUTING)
net/bridge/netfilter/ebt_snat.c +1 -1
index 27443bf229a3b..7dfbcdfc30e5d 100644
@@ -22,7 +22,7 @@ ebt_snat_tg(struct sk_buff *skb, const struct xt_action_param *par)
 {
 	const struct ebt_nat_info *info = par->targinfo;
 
-	if (skb_ensure_writable(skb, ETH_ALEN * 2))
+	if (skb_ensure_writable(skb, 0))
 		return EBT_DROP;
 
 	ether_addr_copy(eth_hdr(skb)->h_source, info->mac);
Signature · 1 line
2.25.1
author maintainer
#577 lore raw

PATCH 577/757 vdpa/mlx5: Make use of a specific 16 bit endianness API

In reply to Greg Kroah-Hartman

From: Eli Cohen <[email protected]>

[ Upstream commit 36bdcf318bc21af24de10b68e32cdea6b9a8d17f ]

Introduce a dedicated function to be used for setting 16 bit fields per virio endianness requirements and use it to set the mtu field.

---
 drivers/vdpa/mlx5/net/mlx5_vnet.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)
drivers/vdpa/mlx5/net/mlx5_vnet.c +6 -2
index 74264e5906951..56228467d7ec6 100644
@@ -1522,6 +1522,11 @@ static inline bool mlx5_vdpa_is_little_endian(struct mlx5_vdpa_dev *mvdev)
 		(mvdev->actual_features & (1ULL << VIRTIO_F_VERSION_1));
 }
 
+static __virtio16 cpu_to_mlx5vdpa16(struct mlx5_vdpa_dev *mvdev, u16 val)
+{
+	return __cpu_to_virtio16(mlx5_vdpa_is_little_endian(mvdev), val);
+}
+
 static int mlx5_vdpa_set_features(struct vdpa_device *vdev, u64 features)
 {
 	struct mlx5_vdpa_dev *mvdev = to_mvdev(vdev);
@@ -1535,8 +1540,7 @@ static int mlx5_vdpa_set_features(struct vdpa_device *vdev, u64 features)
 		return err;
 
 	ndev->mvdev.actual_features = features & ndev->mvdev.mlx_features;
-	ndev->config.mtu = __cpu_to_virtio16(mlx5_vdpa_is_little_endian(mvdev),
-					     ndev->mtu);
+	ndev->config.mtu = cpu_to_mlx5vdpa16(mvdev, ndev->mtu);
 	return err;
 }
 
Signature · 1 line
2.25.1
author maintainer
#578 lore raw

PATCH 578/757 vdpa/mlx5: Fix failure to bring link up

In reply to Greg Kroah-Hartman

From: Eli Cohen <[email protected]>

[ Upstream commit 36b02df2d204da9f7a571f16ed9e91a4d083f207 ]

Set VIRTIO_NET_S_LINK_UP in config status to allow the get the bring the net device's link up.

Fixes 1a86b377aa21 ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices")
---
 drivers/vdpa/mlx5/net/mlx5_vnet.c | 1 +
 1 file changed, 1 insertion(+)
drivers/vdpa/mlx5/net/mlx5_vnet.c +1 -0
index 56228467d7ec6..5ca309473c03d 100644
@@ -1541,6 +1541,7 @@ static int mlx5_vdpa_set_features(struct vdpa_device *vdev, u64 features)
 
 	ndev->mvdev.actual_features = features & ndev->mvdev.mlx_features;
 	ndev->config.mtu = cpu_to_mlx5vdpa16(mvdev, ndev->mtu);
+	ndev->config.status |= cpu_to_mlx5vdpa16(mvdev, VIRTIO_NET_S_LINK_UP);
 	return err;
 }
 
Signature · 1 line
2.25.1
author maintainer
#579 lore raw

PATCH 579/757 vdpa/mlx5: Setup driver only if VIRTIO_CONFIG_S_DRIVER_OK

In reply to Greg Kroah-Hartman

From: Eli Cohen <[email protected]>

[ Upstream commit 1897f0b618b0af0eb9dca709ab6bdf9ef1969ef7 ]

set_map() is used by mlx5 vdpa to create a memory region based on the address map passed by the iotlb argument. If we get successive calls, we will destroy the current memory region and build another one based on the new address mapping. We also need to setup the hardware resources since they depend on the memory region.

If these calls happen before DRIVER_OK, It means that driver VQs may also not been setup and we may not create them yet. In this case we want to avoid setting up the other resources and defer this till we get DRIVER OK.

Fixes 1a86b377aa21 ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices")
---
 drivers/vdpa/mlx5/net/mlx5_vnet.c | 3 +++
 1 file changed, 3 insertions(+)
drivers/vdpa/mlx5/net/mlx5_vnet.c +3 -0
index 5ca309473c03d..1fa6fcac82992 100644
@@ -1658,6 +1658,9 @@ static int mlx5_vdpa_change_map(struct mlx5_vdpa_net *ndev, struct vhost_iotlb *
 	if (err)
 		goto err_mr;
 
+	if (!(ndev->mvdev.status & VIRTIO_CONFIG_S_DRIVER_OK))
+		return 0;
+
 	restore_channels_info(ndev);
 	err = setup_driver(ndev);
 	if (err)
Signature · 1 line
2.25.1
author maintainer
#580 lore raw

PATCH 580/757 selftests: mptcp: depends on built-in IPv6

In reply to Greg Kroah-Hartman

From: Matthieu Baerts <[email protected]>

[ Upstream commit 287d35405989cfe0090e3059f7788dc531879a8d ]

Recently, CONFIG_MPTCP_IPV6 no longer selects CONFIG_IPV6. As a consequence, if CONFIG_MPTCP_IPV6=y is added to the kconfig, it will no longer ensure CONFIG_IPV6=y. If it is not enabled, CONFIG_MPTCP_IPV6 will stay disabled and selftests will fail.

We also need CONFIG_IPV6 to be built-in. For more details, please see commit 0ed37ac586c0 ("mptcp: depends on IPV6 but not as a module").

Note that 'make kselftest-merge' will take all 'config' files found in 'tools/testsing/selftests'. Because some of them already set CONFIG_IPV6=y, MPTCP selftests were still passing. But they will fail if MPTCP selftests are launched manually after having executed this command to prepare the kernel config:

  ./scripts/kconfig/merge_config.sh -m .config \
      ./tools/testing/selftests/net/mptcp/config
Fixes 010b430d5df5 ("mptcp: MPTCP_IPV6 should depend on IPV6 instead of selecting it")
---
 tools/testing/selftests/net/mptcp/config | 1 +
 1 file changed, 1 insertion(+)
tools/testing/selftests/net/mptcp/config +1 -0
index 8df5cb8f71ff9..741a1c4f4ae8f 100644
@@ -1,4 +1,5 @@
 CONFIG_MPTCP=y
+CONFIG_IPV6=y
 CONFIG_MPTCP_IPV6=y
 CONFIG_INET_DIAG=m
 CONFIG_INET_MPTCP_DIAG=m
Signature · 1 line
2.25.1
#581 lore raw

Re: [PATCH 5.9 580/757] selftests: mptcp: depends on built-in IPv6

Hi Greg,

Quoted 8 lines · Greg Kroah-Hartman

From: Matthieu Baerts <[email protected]>

[ Upstream commit 287d35405989cfe0090e3059f7788dc531879a8d ]

Recently, CONFIG_MPTCP_IPV6 no longer selects CONFIG_IPV6. As a consequence, if CONFIG_MPTCP_IPV6=y is added to the kconfig, it will no longer ensure CONFIG_IPV6=y. If it is not enabled, CONFIG_MPTCP_IPV6 will stay disabled and selftests will fail.

I think Sasha wanted to drop this patch [1]. But as I said earlier [2], this patch is not wrong, it is just not needed in v5.9 because the "Fixes" commit 010b430d5df5 ("mptcp: MPTCP_IPV6 should depend on IPV6 instead of selecting it") is not in v5.9.

I guess it is certainly easier to keep it because it is not wrong and doesn't hurt.

[1] https://lore.kernel.org/stable/20201026142329.GJ4060117@sasha-vm/
[2] https://lore.kernel.org/stable/[email protected]/

Cheers,
Matt

Signature · 2 lines
Tessares | Belgium | Hybrid Access Solutions
www.tessares.net
maintainer
#582 lore raw

Re: [PATCH 5.9 580/757] selftests: mptcp: depends on built-in IPv6

Quoted 7 lines · Matthieu Baerts

Hi Greg,

Quoted 4 lines · Greg Kroah-Hartman

From: Matthieu Baerts <[email protected]>

[ Upstream commit 287d35405989cfe0090e3059f7788dc531879a8d ]

Quoted 8 lines
Quoted 4 lines

Recently, CONFIG_MPTCP_IPV6 no longer selects CONFIG_IPV6. As a consequence, if CONFIG_MPTCP_IPV6=y is added to the kconfig, it will no longer ensure CONFIG_IPV6=y. If it is not enabled, CONFIG_MPTCP_IPV6 will stay disabled and selftests will fail.

I think Sasha wanted to drop this patch [1]. But as I said earlier [2], this patch is not wrong, it is just not needed in v5.9 because the "Fixes" commit 010b430d5df5 ("mptcp: MPTCP_IPV6 should depend on IPV6 instead of selecting it") is not in v5.9.

I guess it is certainly easier to keep it because it is not wrong and doesn't hurt.

I dropped a wrong patch by accident :(

Fixing this up... Thanks for pointing it out!

Signature · 2 lines
Thanks,
Sasha
author maintainer
#583 lore raw

PATCH 581/757 netfilter: nf_fwd_netdev: clear timestamp in forwarding path

In reply to Greg Kroah-Hartman

From: Pablo Neira Ayuso <[email protected]>

[ Upstream commit c77761c8a59405cb7aa44188b30fffe13fbdd02d ]

Similar to 7980d2eabde8 ("ipvs: clear skb->tstamp in forwarding path"). fq qdisc requires tstamp to be cleared in forwarding path.

Fixes 8203e2d844d3 ("net: clear skb->tstamp in forwarding paths")
Fixes fb420d5d91c1 ("tcp/fq: move back to CLOCK_MONOTONIC")
Fixes 80b14dee2bea ("net: Add a new socket option for a future transmit time.")
---
 net/netfilter/nf_dup_netdev.c  | 1 +
 net/netfilter/nft_fwd_netdev.c | 1 +
 2 files changed, 2 insertions(+)
net/netfilter/nf_dup_netdev.c +1 -0
index 2b01a151eaa80..a579e59ee5c5e 100644
@@ -19,6 +19,7 @@ static void nf_do_netdev_egress(struct sk_buff *skb, struct net_device *dev)
 		skb_push(skb, skb->mac_len);
 
 	skb->dev = dev;
+	skb->tstamp = 0;
 	dev_queue_xmit(skb);
 }
 
net/netfilter/nft_fwd_netdev.c +1 -0
index 3087e23297dbf..b77985986b24e 100644
@@ -138,6 +138,7 @@ static void nft_fwd_neigh_eval(const struct nft_expr *expr,
 		return;
 
 	skb->dev = dev;
+	skb->tstamp = 0;
 	neigh_xmit(neigh_table, dev, addr, skb);
 out:
 	regs->verdict.code = verdict;
Signature · 1 line
2.25.1
author maintainer
#584 lore raw

PATCH 582/757 soc: xilinx: Fix error code in zynqmp_pm_probe()

In reply to Greg Kroah-Hartman

From: Dan Carpenter <[email protected]>

[ Upstream commit a6f2f0fdc73aacc6e10ae48ae78634dba26702d4 ]

This should be returning PTR_ERR() but it returns IS_ERR() instead.

---
 drivers/soc/xilinx/zynqmp_power.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/soc/xilinx/zynqmp_power.c +1 -1
index 31ff49fcd078b..c556623dae024 100644
@@ -205,7 +205,7 @@ static int zynqmp_pm_probe(struct platform_device *pdev)
 		rx_chan = mbox_request_channel_byname(client, "rx");
 		if (IS_ERR(rx_chan)) {
 			dev_err(&pdev->dev, "Failed to request rx channel\n");
-			return IS_ERR(rx_chan);
+			return PTR_ERR(rx_chan);
 		}
 	} else if (of_find_property(pdev->dev.of_node, "interrupts", NULL)) {
 		irq = platform_get_irq(pdev, 0);
Signature · 1 line
2.25.1
author maintainer
#585 lore raw

PATCH 583/757 arm64: dts: meson: vim3: correct led polarity

In reply to Greg Kroah-Hartman

From: Jerome Brunet <[email protected]>

[ Upstream commit 1f9d87d08e4a2299e86f8a1600aedf87ecd3b636 ]

The LEDs on the vim3 are active when the gpio is high, not low.

Fixes c6d29c66e582 ("arm64: dts: meson-g12b-khadas-vim3: add initial device-tree")
---
 arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi +2 -2
index 94f75b4465044..73783692e30ee 100644
@@ -41,13 +41,13 @@ leds {
 
 		led-white {
 			label = "vim3:white:sys";
-			gpios = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
 
 		led-red {
 			label = "vim3:red";
-			gpios = <&gpio_expander 5 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio_expander 5 GPIO_ACTIVE_HIGH>;
 		};
 	};
 
Signature · 1 line
2.25.1
author maintainer
#586 lore raw

PATCH 584/757 ARM: dts: imx6sl: fix rng node

In reply to Greg Kroah-Hartman

From: Horia Geantă <[email protected]>

[ Upstream commit 82ffb35c2ce63ef8e0325f75eb48022abcf8edbe ]

rng DT node was added without a compatible string.

i.MX driver for RNGC (drivers/char/hw_random/imx-rngc.c) also claims support for RNGB, and is currently used for i.MX25.

Let's use this driver also for RNGB block in i.MX6SL.

Fixes e29fe21cff96 ("ARM: dts: add device tree source for imx6sl SoC")
---
 arch/arm/boot/dts/imx6sl.dtsi | 2 ++
 1 file changed, 2 insertions(+)
arch/arm/boot/dts/imx6sl.dtsi +2 -0
index 1c7180f285393..91a8c54d5e113 100644
@@ -939,8 +939,10 @@ memory-controller@21b0000 {
 			};
 
 			rngb: rngb@21b4000 {
+				compatible = "fsl,imx6sl-rngb", "fsl,imx25-rngb";
 				reg = <0x021b4000 0x4000>;
 				interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SL_CLK_DUMMY>;
 			};
 
 			weim: weim@21b8000 {
Signature · 1 line
2.25.1
author maintainer
#587 lore raw

PATCH 585/757 ARM: at91: pm: of_node_put() after its usage

In reply to Greg Kroah-Hartman

From: Claudiu Beznea <[email protected]>

[ Upstream commit e222f943519564978e082c152b4140a47e93392c ]

Put node after it has been used.

Fixes 13f16017d3e3f ("ARM: at91: pm: Tie the USB clock mask to the pmc")
---
 arch/arm/mach-at91/pm.c | 1 +
 1 file changed, 1 insertion(+)
arch/arm/mach-at91/pm.c +1 -0
index 2aab043441e8f..eae8aaaadc3bf 100644
@@ -800,6 +800,7 @@ static void __init at91_pm_init(void (*pm_idle)(void))
 
 	pmc_np = of_find_matching_node_and_match(NULL, atmel_pmc_ids, &of_id);
 	soc_pm.data.pmc = of_iomap(pmc_np, 0);
+	of_node_put(pmc_np);
 	if (!soc_pm.data.pmc) {
 		pr_err("AT91: PM not supported, PMC not found\n");
 		return;
Signature · 1 line
2.25.1