arm64: dts: qcom: Fix dma node name
cover arm64: dts: qcom: Fix dma node name
DMA controller binding describes the node name should be dma-controller and not dma, so fix the node name in the qcom dts files
Vinod Koul (9):
arm64: dts: sdm845: Fix dma node name
arm64: dts: sdm630: Fix dma node name
arm64: dts: qcs404: Fix dma node name
arm64: dts: msm8916: Fix dma node name
arm64: dts: msm8994: Fix dma node name
arm64: dts: msm8996: Fix dma node name
arm64: dts: msm8998: Fix dma node name
arm64: dts: ipq6018: Fix dma node name
arm64: dts: ipq8074: Fix dma node name
arch/arm64/boot/dts/qcom/ipq6018.dtsi | 4 ++-- arch/arm64/boot/dts/qcom/ipq8074.dtsi | 4 ++-- arch/arm64/boot/dts/qcom/msm8916.dtsi | 2 +- arch/arm64/boot/dts/qcom/msm8994.dtsi | 4 ++-- arch/arm64/boot/dts/qcom/msm8996.dtsi | 2 +- arch/arm64/boot/dts/qcom/msm8998.dtsi | 2 +- arch/arm64/boot/dts/qcom/qcs404.dtsi | 4 ++-- arch/arm64/boot/dts/qcom/sdm630.dtsi | 4 ++-- arch/arm64/boot/dts/qcom/sdm845.dtsi | 2 +- 9 files changed, 14 insertions(+), 14 deletions(-)
Signature · 1 line
2.26.2
PATCH 1/9 arm64: dts: sdm845: Fix dma node name
DMA controller binding describes the node name should be dma-controller and not dma, so fix the node name
--- arch/arm64/boot/dts/qcom/sdm845.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm64/boot/dts/qcom/sdm845.dtsi +1 -1
@@ -4484,7 +4484,7 @@ msi-controller@17a40000 { }; }; - slimbam: dma@17184000 { + slimbam: dma-controller@17184000 { compatible = "qcom,bam-v1.7.0"; qcom,controlled-remotely; reg = <0 0x17184000 0 0x2a000>;
Signature · 1 line
2.26.2
PATCH 2/9 arm64: dts: sdm630: Fix dma node name
In reply to Vinod KoulDMA controller binding describes the node name should be dma-controller and not dma, so fix the node name
--- arch/arm64/boot/dts/qcom/sdm630.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
arch/arm64/boot/dts/qcom/sdm630.dtsi +2 -2
@@ -830,7 +830,7 @@ sdhc_1: sdhci@c0c4000 { status = "disabled"; }; - blsp1_dma: dma@c144000 { + blsp1_dma: dma-controller@c144000 { compatible = "qcom,bam-v1.7.0"; reg = <0x0c144000 0x1f000>; interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
@@ -944,7 +944,7 @@ blsp_i2c4: i2c@c178000 { status = "disabled"; }; - blsp2_dma: dma@c184000 { + blsp2_dma: dma-controller@c184000 { compatible = "qcom,bam-v1.7.0"; reg = <0x0c184000 0x1f000>; interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
Signature · 1 line
2.26.2
PATCH 3/9 arm64: dts: qcs404: Fix dma node name
In reply to Vinod KoulDMA controller binding describes the node name should be dma-controller and not dma, so fix the node name
--- arch/arm64/boot/dts/qcom/qcs404.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
arch/arm64/boot/dts/qcom/qcs404.dtsi +2 -2
@@ -801,7 +801,7 @@ sdcc1: sdcc@7804000 { status = "disabled"; }; - blsp1_dma: dma@7884000 { + blsp1_dma: dma-controller@7884000 { compatible = "qcom,bam-v1.7.0"; reg = <0x07884000 0x25000>; interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
@@ -1045,7 +1045,7 @@ blsp1_spi4: spi@78b9000 { status = "disabled"; }; - blsp2_dma: dma@7ac4000 { + blsp2_dma: dma-controller@7ac4000 { compatible = "qcom,bam-v1.7.0"; reg = <0x07ac4000 0x17000>; interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
Signature · 1 line
2.26.2
PATCH 4/9 arm64: dts: msm8916: Fix dma node name
In reply to Vinod KoulDMA controller binding describes the node name should be dma-controller and not dma, so fix the node name
--- arch/arm64/boot/dts/qcom/msm8916.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm64/boot/dts/qcom/msm8916.dtsi +1 -1
@@ -1391,7 +1391,7 @@ sdhc_2: sdhci@7864000 { status = "disabled"; }; - blsp_dma: dma@7884000 { + blsp_dma: dma-controller@7884000 { compatible = "qcom,bam-v1.7.0"; reg = <0x07884000 0x23000>; interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
Signature · 1 line
2.26.2
PATCH 5/9 arm64: dts: msm8994: Fix dma node name
In reply to Vinod KoulDMA controller binding describes the node name should be dma-controller and not dma, so fix the node name
--- arch/arm64/boot/dts/qcom/msm8994.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
arch/arm64/boot/dts/qcom/msm8994.dtsi +2 -2
@@ -305,7 +305,7 @@ sdhc1: sdhci@f9824900 { status = "disabled"; }; - blsp1_dma: dma@f9904000 { + blsp1_dma: dma-controller@f9904000 { compatible = "qcom,bam-v1.7.0"; reg = <0xf9904000 0x19000>; interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
@@ -401,7 +401,7 @@ blsp_i2c4: i2c@f9926000 { status = "disabled"; }; - blsp2_dma: dma@f9944000 { + blsp2_dma: dma-controller@f9944000 { compatible = "qcom,bam-v1.7.0"; reg = <0xf9944000 0x19000>; interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
Signature · 1 line
2.26.2
PATCH 6/9 arm64: dts: msm8996: Fix dma node name
In reply to Vinod KoulDMA controller binding describes the node name should be dma-controller and not dma, so fix the node name
--- arch/arm64/boot/dts/qcom/msm8996.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm64/boot/dts/qcom/msm8996.dtsi +1 -1
@@ -1990,7 +1990,7 @@ dwc3@7600000 { }; }; - slimbam: dma@9184000 { + slimbam: dma-controller@9184000 { compatible = "qcom,bam-v1.7.0"; qcom,controlled-remotely; reg = <0x09184000 0x32000>;
Signature · 1 line
2.26.2
PATCH 7/9 arm64: dts: msm8998: Fix dma node name
In reply to Vinod KoulDMA controller binding describes the node name should be dma-controller and not dma, so fix the node name
--- arch/arm64/boot/dts/qcom/msm8998.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm64/boot/dts/qcom/msm8998.dtsi +1 -1
@@ -1754,7 +1754,7 @@ sdhc2: sdhci@c0a4900 { status = "disabled"; }; - blsp1_dma: dma@c144000 { + blsp1_dma: dma-controller@c144000 { compatible = "qcom,bam-v1.7.0"; reg = <0x0c144000 0x25000>; interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
Signature · 1 line
2.26.2
PATCH 8/9 arm64: dts: ipq6018: Fix dma node name
In reply to Vinod KoulDMA controller binding describes the node name should be dma-controller and not dma, so fix the node name
--- arch/arm64/boot/dts/qcom/ipq6018.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
arch/arm64/boot/dts/qcom/ipq6018.dtsi +2 -2
@@ -192,7 +192,7 @@ prng: qrng@e1000 { clock-names = "core"; }; - cryptobam: dma@704000 { + cryptobam: dma-controller@704000 { compatible = "qcom,bam-v1.7.0"; reg = <0x00704000 0x20000>; interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
@@ -252,7 +252,7 @@ tcsr_q6: syscon@1945000 { reg = <0x01945000 0xe000>; }; - blsp_dma: dma@7884000 { + blsp_dma: dma-controller@7884000 { compatible = "qcom,bam-v1.7.0"; reg = <0x07884000 0x2b000>; interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
Signature · 1 line
2.26.2
PATCH 9/9 arm64: dts: ipq8074: Fix dma node name
In reply to Vinod KoulDMA controller binding describes the node name should be dma-controller and not dma, so fix the node name
--- arch/arm64/boot/dts/qcom/ipq8074.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
arch/arm64/boot/dts/qcom/ipq8074.dtsi +2 -2
@@ -276,7 +276,7 @@ sdhc_1: sdhci@7824900 { status = "disabled"; }; - blsp_dma: dma@7884000 { + blsp_dma: dma-controller@7884000 { compatible = "qcom,bam-v1.7.0"; reg = <0x07884000 0x2b000>; interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
@@ -372,7 +372,7 @@ blsp1_i2c3: i2c@78b7000 { status = "disabled"; }; - qpic_bam: dma@7984000 { + qpic_bam: dma-controller@7984000 { compatible = "qcom,bam-v1.7.0"; reg = <0x07984000 0x1a000>; interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
Signature · 1 line
2.26.2