Preparation work for using font_desc in vc_data
Subsystems (5)
cover Preparation work for using font_desc in vc_data
Hi Daniel, Hi Greg, Hi all,
We are planning to use font_desc instead of console_font in vc_data, and this is just some prep work for it. It doesn't do much, but at least it removes two "FIXME"s in fbcon.c :)
Peilin Ye (5):
[1/5] fbdev/atafb: Remove unused extern variables
Searching for fontdata gave me this in fbdev/atafb.c:
extern unsigned char fontdata_8x8[]; extern unsigned char fontdata_8x16[];
...which freaked me out, since in 6735b4632def ("Fonts: Support FONT_EXTRA_WORDS macros for built-in fonts") I changed them from char arrays to structures, in lib/fonts/. Fortunately it turns out these extern variables have nothing to do with lib/fonts/, and are not being used anywhere, so remove them for less confusion.
m68k cross-compiled.
[2/5] Fonts: Make font size unsigned in font_desc
Our goal is to use font_desc "everywhere" in the kernel, and signed width and height is inappropriate.
Also, change some printk() format identifiers in console/sticore.c from %d to %u. parisc cross-compiled.
[3/5] Fonts: Add charcount field to font_desc
Add unsigned int charcount to font_desc, and update each of our 13 built-in fonts.
[4/5] fbcon: Avoid hard-coding built-in font charcount [5/5] parisc/sticore: Avoid hard-coding built-in font charcount
Everyone (tty, fbcon, sticore, etc.) is assuming that all built-in fonts have 256 characters, and is using hard-coded 256 or 255 everywhere. These two patches removes some of them. [5/5] is parisc cross-compiled.
Now is a good time to review all find_font() and get_default_font() callers:
drivers/media/pci/solo6x10/solo6x10-enc.c 133 const struct font_desc *vga = find_font("VGA8x16");
drivers/media/test-drivers/vimc/vimc-core.c 268 const struct font_desc *font = find_font("VGA8x16");
drivers/media/test-drivers/vivid/vivid-core.c 1928 const struct font_desc *font = find_font("VGA8x16");
drivers/usb/misc/sisusbvga/sisusb.c 2285 myfont = find_font("VGA8x16");
* These 4 only care about font VGA8x16, so let them be for now;
drivers/video/console/sticore.c 499 fbfont = find_font(fbfont_name);
drivers/video/console/sticore.c 501 fbfont = get_default_font(1024,768, ~(u32)0, ~(u32)0);
* Uses 255 and 256, (hopefully) cleaned up by [5/5]; drivers/video/fbdev/core/fbcon.c 999 if (!fontname[0] || !(font = find_font(fontname)))
drivers/video/fbdev/core/fbcon.c 1000 font = get_default_font(info->var.xres, drivers/video/fbdev/core/fbcon.c 1078 if (!fontname[0] || !(font = find_font(fontname))) drivers/video/fbdev/core/fbcon.c 1079 font = get_default_font(info->var.xres,
* Use 256, cleaned up by [4/5];
drivers/video/fbdev/core/fbcon.c 2548 else if (!(f = find_font(name)))
drivers/video/fbdev/core/fbcon.c 2546 f = get_default_font(info->var.xres, info->var.yres,
* Uses 256 but no easy fix. I'll clean this up after making fbcon_do_set_font() pass a font_desc as parameter;
drivers/firmware/efi/earlycon.c 234 font = get_default_font(xres, yres, -1, -1);
* Does not care about charcount.
Thank you!
Peilin Ye
drivers/video/console/sticore.c | 10 +++++----- drivers/video/fbdev/atafb.c | 8 -------- drivers/video/fbdev/core/fbcon.c | 5 ++--- include/linux/font.h | 3 ++- lib/fonts/font_10x18.c | 1 + lib/fonts/font_6x10.c | 1 + lib/fonts/font_6x11.c | 1 + lib/fonts/font_6x8.c | 1 + lib/fonts/font_7x14.c | 1 + lib/fonts/font_8x16.c | 1 + lib/fonts/font_8x8.c | 1 + lib/fonts/font_acorn_8x8.c | 1 + lib/fonts/font_mini_4x6.c | 1 + lib/fonts/font_pearl_8x8.c | 1 + lib/fonts/font_sun12x22.c | 1 + lib/fonts/font_sun8x16.c | 1 + lib/fonts/font_ter16x32.c | 1 + 17 files changed, 22 insertions(+), 17 deletions(-)
Signature · 6 lines
2.25.1 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
PATCH 1/5 fbdev/atafb: Remove unused extern variables
Remove 6 unused extern variables to reduce confusion. It is worth mentioning that lib/fonts/font_8x8.c and lib/fonts/font_8x16.c also declare fontdata_8x8 and fontdata_8x16 respectively, and this file has nothing to do with them.
---
$ # Build-tested (Ubuntu 20.04) $ sudo apt install gcc-m68k-linux-gnu $ cp arch/m68k/configs/atari_defconfig .config $ make ARCH=m68k menuconfig $ make ARCH=m68k CROSS_COMPILE=m68k-linux-gnu- -j`nproc` all
drivers/video/fbdev/atafb.c | 8 -------- 1 file changed, 8 deletions(-)
drivers/video/fbdev/atafb.c +0 -8
@@ -240,14 +240,6 @@ static int *MV300_reg = MV300_reg_8bit;static int inverse; -extern int fontheight_8x8; -extern int fontwidth_8x8; -extern unsigned char fontdata_8x8[]; - -extern int fontheight_8x16; -extern int fontwidth_8x16; -extern unsigned char fontdata_8x16[]; -/* * struct fb_ops { * * open/release and usage marking
Signature · 6 lines
2.25.1 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
PATCH 2/5 Fonts: Make font size unsigned in font_desc
It is improper to define width and height as signed in struct font_desc. Make them unsigned. Also, change the corresponding printk() format identifiers from %d to %u, in sti_select_fbfont().
---
Build-tested.
drivers/video/console/sticore.c | 2 +- include/linux/font.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)
drivers/video/console/sticore.c +1 -1
@@ -502,7 +502,7 @@ sti_select_fbfont(struct sti_cooked_rom *cooked_rom, const char *fbfont_name)if (!fbfont)return NULL ; -pr_info ("STI selected %dx%d framebuffer font %s for sticon\n" , +pr_info ("STI selected %ux%u framebuffer font %s for sticon\n" , fbfont->width, fbfont->height, fbfont->name); bpc = ((fbfont->width+7 )/8 ) * fbfont->height;
include/linux/font.h +1 -1
@@ -16,7 +16,7 @@struct font_desc {int idx;const char *name; -int width, height; +unsigned int width, height;const void *data;int pref; };
Signature · 6 lines
2.25.1 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
PATCH 3/5 Fonts: Add charcount field to font_desc
Subsystems are assuming the number of characters of our built-in fonts. Include that information in our kernel font descriptor, struct font_desc.
--- include/linux/font.h | 1 + lib/fonts/font_10x18.c | 1 + lib/fonts/font_6x10.c | 1 + lib/fonts/font_6x11.c | 1 + lib/fonts/font_6x8.c | 1 + lib/fonts/font_7x14.c | 1 + lib/fonts/font_8x16.c | 1 + lib/fonts/font_8x8.c | 1 + lib/fonts/font_acorn_8x8.c | 1 + lib/fonts/font_mini_4x6.c | 1 + lib/fonts/font_pearl_8x8.c | 1 + lib/fonts/font_sun12x22.c | 1 + lib/fonts/font_sun8x16.c | 1 + lib/fonts/font_ter16x32.c | 1 + 14 files changed, 14 insertions(+)
include/linux/font.h +1 -0
@@ -17,6 +17,7 @@ struct font_desc {int idx;const char *name;unsigned int width, height; +unsigned int charcount;const void *data;int pref; };
lib/fonts/font_10x18.c +1 -0
@@ -5137,6 +5137,7 @@ const struct font_desc font_10x18 = { .name = "10x18", .width = 10, .height = 18, + .charcount = 256, .data = fontdata_10x18.data, #ifdef __sparc__ .pref = 5,
lib/fonts/font_6x10.c +1 -0
@@ -3083,6 +3083,7 @@ const struct font_desc font_6x10 = { .name = "6x10", .width = 6, .height = 10, + .charcount = 256, .data = fontdata_6x10.data, .pref = 0, };
lib/fonts/font_6x11.c +1 -0
@@ -3346,6 +3346,7 @@ const struct font_desc font_vga_6x11 = { .name = "ProFont6x11", .width = 6, .height = 11, + .charcount = 256, .data = fontdata_6x11.data,/* Try avoiding this font if possible unless on MAC */ .pref = -2000,
lib/fonts/font_6x8.c +1 -0
@@ -2571,6 +2571,7 @@ const struct font_desc font_6x8 = { .name = "6x8", .width = 6, .height = 8, + .charcount = 256, .data = fontdata_6x8.data, .pref = 0, };
lib/fonts/font_7x14.c +1 -0
@@ -4113,6 +4113,7 @@ const struct font_desc font_7x14 = { .name = "7x14", .width = 7, .height = 14, + .charcount = 256, .data = fontdata_7x14.data, .pref = 0, };
lib/fonts/font_8x16.c +1 -0
@@ -4627,6 +4627,7 @@ const struct font_desc font_vga_8x16 = { .name = "VGA8x16", .width = 8, .height = 16, + .charcount = 256, .data = fontdata_8x16.data, .pref = 0, };
lib/fonts/font_8x8.c +1 -0
@@ -2578,6 +2578,7 @@ const struct font_desc font_vga_8x8 = { .name = "VGA8x8", .width = 8, .height = 8, + .charcount = 256, .data = fontdata_8x8.data, .pref = 0, };
lib/fonts/font_acorn_8x8.c +1 -0
@@ -270,6 +270,7 @@ const struct font_desc font_acorn_8x8 = { .name = "Acorn8x8", .width = 8, .height = 8, + .charcount = 256, .data = acorndata_8x8.data, #ifdef CONFIG_ARCH_ACORN .pref = 20,
lib/fonts/font_mini_4x6.c +1 -0
@@ -2152,6 +2152,7 @@ const struct font_desc font_mini_4x6 = { .name = "MINI4x6", .width = 4, .height = 6, + .charcount = 256, .data = fontdata_mini_4x6.data, .pref = 3, };
lib/fonts/font_pearl_8x8.c +1 -0
@@ -2582,6 +2582,7 @@ const struct font_desc font_pearl_8x8 = { .name = "PEARL8x8", .width = 8, .height = 8, + .charcount = 256, .data = fontdata_pearl8x8.data, .pref = 2, };
lib/fonts/font_sun12x22.c +1 -0
@@ -6156,6 +6156,7 @@ const struct font_desc font_sun_12x22 = { .name = "SUN12x22", .width = 12, .height = 22, + .charcount = 256, .data = fontdata_sun12x22.data, #ifdef __sparc__ .pref = 5,
lib/fonts/font_sun8x16.c +1 -0
@@ -268,6 +268,7 @@ const struct font_desc font_sun_8x16 = { .name = "SUN8x16", .width = 8, .height = 16, + .charcount = 256, .data = fontdata_sun8x16.data, #ifdef __sparc__ .pref = 10,
lib/fonts/font_ter16x32.c +1 -0
@@ -2062,6 +2062,7 @@ const struct font_desc font_ter_16x32 = { .name = "TER16x32", .width = 16, .height = 32, + .charcount = 256, .data = fontdata_ter16x32.data, #ifdef __sparc__ .pref = 5,
Signature · 6 lines
2.25.1 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
PATCH 4/5 fbcon: Avoid hard-coding built-in font charcount
fbcon_startup() and fbcon_init() are hard-coding the number of characters of our built-in fonts as 256. Recently, we included that information in our kernel font descriptor struct font_desc, so use font->charcount instead of a hard-coded value.
This patch depends on patch "Fonts: Add charcount field to font_desc".
--- drivers/video/fbdev/core/fbcon.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-)
drivers/video/fbdev/core/fbcon.c +2 -3
@@ -1004,7 +1004,7 @@ static const char *fbcon_startup(void) vc->vc_font.width = font->width; vc->vc_font.height = font->height; vc->vc_font.data = (void *)(p->fontdata = font->data); - vc->vc_font.charcount =256 ;/* FIXME Need to support more fonts */ + vc->vc_font.charcount = font->charcount; }else { p->fontdata = vc->vc_font.data; }
@@ -1083,8 +1083,7 @@ static void fbcon_init(struct vc_data *vc, int init) vc->vc_font.width = font->width; vc->vc_font.height = font->height; vc->vc_font.data = (void *)(p->fontdata = font->data); - vc->vc_font.charcount =256 ;/* FIXME Need to -support more fonts */ + vc->vc_font.charcount = font->charcount; } }
Signature · 6 lines
2.25.1 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
PATCH 5/5 parisc/sticore: Avoid hard-coding built-in font charcount
sti_select_fbfont() and sti_cook_fonts() are hard-coding the number of characters of our built-in fonts as 256. Recently, we included that information in our kernel font descriptor struct font_desc, so use fbfont->charcount instead of hard-coded values.
This patch depends on patch "Fonts: Add charcount field to font_desc".
---
$ # Build-tested (Ubuntu 20.04) $ sudo apt-get install binutils-hppa64-linux-gnu gcc-7-hppa64-linux-gnu $ cp arch/parisc/configs/generic-64bit_defconfig .config $ make -j`nproc` ARCH=parisc CROSS_COMPILE=hppa64-linux-gnu- all
drivers/video/console/sticore.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/video/console/sticore.c +4 -4
@@ -506,7 +506,7 @@ sti_select_fbfont(struct sti_cooked_rom *cooked_rom, const char *fbfont_name) fbfont->width, fbfont->height, fbfont->name); bpc = ((fbfont->width+7 )/8 ) * fbfont->height; - size = bpc *256 ; + size = bpc * fbfont->charcount; size +=sizeof (struct sti_rom_font ); nf =kzalloc (size,STI_LOWMEM );
@@ -514,7 +514,7 @@ sti_select_fbfont(struct sti_cooked_rom *cooked_rom, const char *fbfont_name)return NULL ; nf->first_char =0 ; - nf->last_char =255 ; + nf->last_char = fbfont->charcount -1 ; nf->width = fbfont->width; nf->height = fbfont->height; nf->font_type =STI_FONT_HPROMAN8 ;
@@ -525,7 +525,7 @@ sti_select_fbfont(struct sti_cooked_rom *cooked_rom, const char *fbfont_name) dest = nf; dest +=sizeof (struct sti_rom_font ); -memcpy (dest, fbfont->data, bpc*256 ); +memcpy (dest, fbfont->data, bpc * fbfont->charcount); cooked_font =kzalloc (sizeof (*cooked_font),GFP_KERNEL );if (!cooked_font) {
@@ -660,7 +660,7 @@ static int sti_cook_fonts(struct sti_cooked_rom *cooked_rom,void sti_font_convert_bytemode (struct sti_struct *sti,struct sti_cooked_font *f) {unsigned char *n, *p, *q; -int size = f->raw->bytes_per_char *256 +sizeof (struct sti_rom_font ); +int size = f->raw->bytes_per_char * (f->raw->last_char +1 ) +sizeof (struct sti_rom_font );struct sti_rom_font *old_font;if (sti->wordmode)
Signature · 6 lines
2.25.1 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH 5/5] parisc/sticore: Avoid hard-coding built-in font charcount
Quoted 8 lines · Peilin Ye
sti_select_fbfont()andsti_cook_fonts()are hard-coding the number of characters of our built-in fonts as 256. Recently, we included that information in our kernel font descriptorstruct font_desc, so usefbfont->charcountinstead of hard-coded values.This patch depends on patch "Fonts: Add charcount field to
font_desc".Signed-off-by Peilin Ye <[email protected]>
Quoted 52 lines
---
$ # Build-tested (Ubuntu 20.04) $ sudo apt-get install binutils-hppa64-linux-gnu gcc-7-hppa64-linux-gnu $ cp arch/parisc/configs/generic-64bit_defconfig .config $ make -j`nproc` ARCH=parisc CROSS_COMPILE=hppa64-linux-gnu- alldrivers/video/console/sticore.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)drivers/video/console/sticore.c +4
-4@@ -506,7 +506,7 @@ sti_select_fbfont(struct sti_cooked_rom *cooked_rom, const char *fbfont_name) fbfont->width, fbfont->height, fbfont->name); bpc = ((fbfont->width+7 )/8 ) * fbfont->height; - size = bpc *256 ; + size = bpc * fbfont->charcount; size +=sizeof (struct sti_rom_font ); nf =kzalloc (size,STI_LOWMEM );@@ -514,7 +514,7 @@ sti_select_fbfont(struct sti_cooked_rom *cooked_rom, const char *fbfont_name)return NULL ; nf->first_char =0 ; - nf->last_char =255 ; + nf->last_char = fbfont->charcount -1 ; nf->width = fbfont->width; nf->height = fbfont->height; nf->font_type =STI_FONT_HPROMAN8 ;@@ -525,7 +525,7 @@ sti_select_fbfont(struct sti_cooked_rom *cooked_rom, const char *fbfont_name) dest = nf; dest +=sizeof (struct sti_rom_font ); -memcpy (dest, fbfont->data, bpc*256 ); +memcpy (dest, fbfont->data, bpc * fbfont->charcount); cooked_font =kzalloc (sizeof (*cooked_font),GFP_KERNEL );if (!cooked_font) {@@ -660,7 +660,7 @@ static int sti_cook_fonts(struct sti_cooked_rom *cooked_rom,void sti_font_convert_bytemode (struct sti_struct *sti,struct sti_cooked_font *f) {unsigned char *n, *p, *q; -int size = f->raw->bytes_per_char *256 +sizeof (struct sti_rom_font ); +int size = f->raw->bytes_per_char * (f->raw->last_char +1 ) +sizeof (struct sti_rom_font );struct sti_rom_font *old_font;if (sti->wordmode)Signature · 1 line
2.25.1
Signature · 7 lines
Daniel Vetter Software Engineer, Intel Corporation http://blog.ffwll.ch _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH 4/5] fbcon: Avoid hard-coding built-in font charcount
In reply to Peilin YeQuoted 8 lines · Peilin Ye
fbcon_startup()andfbcon_init()are hard-coding the number of characters of our built-in fonts as 256. Recently, we included that information in our kernel font descriptorstruct font_desc, so usefont->charcountinstead of a hard-coded value.This patch depends on patch "Fonts: Add charcount field to
font_desc".Signed-off-by Peilin Ye <[email protected]>
So I think this is correct, but it also doesn't do a hole lot yet. fbcon.c still has tons of hard-coded 256 all over, and if (p->userfont).
I think if we instead set vc->vc_font.charcount both in fbcon_init and in fbcon_do_set_font (probably just replace the userfont parameter with font_charcount for now), then we could replace these all with vc->vc_font.charcount. And the code would already improve quite a bit I think.
With just this change here I think we have even more inconsistency, since for built-in fonts vc->vc_font.charcount is now set correctly, but for userfonts we need to instead look at FNTCHARCNT(vc->vc_font.data).
We'd still need to maintain p->userfont because of the refcount chaos, but that is much more work.
Or do I miss something here?
-Daniel
Quoted 30 lines
--- drivers/video/fbdev/core/fbcon.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-)drivers/video/fbdev/core/fbcon.c +2
-3@@ -1004,7 +1004,7 @@ static const char *fbcon_startup(void) vc->vc_font.width = font->width; vc->vc_font.height = font->height; vc->vc_font.data = (void *)(p->fontdata = font->data); - vc->vc_font.charcount =256 ;/* FIXME Need to support more fonts */ + vc->vc_font.charcount = font->charcount; }else { p->fontdata = vc->vc_font.data; }@@ -1083,8 +1083,7 @@ static void fbcon_init(struct vc_data *vc, int init) vc->vc_font.width = font->width; vc->vc_font.height = font->height; vc->vc_font.data = (void *)(p->fontdata = font->data); - vc->vc_font.charcount =256 ;/* FIXME Need to -support more fonts */ + vc->vc_font.charcount = font->charcount; } }Signature · 1 line
2.25.1
Signature · 7 lines
Daniel Vetter Software Engineer, Intel Corporation http://blog.ffwll.ch _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH 4/5] fbcon: Avoid hard-coding built-in font charcount
Quoted 19 lines · Daniel Vetter
Quoted 8 lines · Peilin Ye
fbcon_startup()andfbcon_init()are hard-coding the number of characters of our built-in fonts as 256. Recently, we included that information in our kernel font descriptorstruct font_desc, so usefont->charcountinstead of a hard-coded value.This patch depends on patch "Fonts: Add charcount field to
font_desc".Signed-off-by Peilin Ye <[email protected]>So I think this is correct, but it also doesn't do a hole lot yet.
fbcon.cstill has tons of hard-coded 256 all over, and if (p->userfont).I think if we instead set
vc->vc_font.charcountboth infbcon_initand infbcon_do_set_font(probably just replace the userfont parameter withfont_charcountfor now), then we could replace these all withvc->vc_font.charcount. And the code would already improve quite a bit I think.
Quoted 3 lines
With just this change here I think we have even more inconsistency, since for built-in fonts
vc->vc_font.charcountis now set correctly, but for userfonts we need to instead look atFNTCHARCNT(vc->vc_font.data).
You are right, let's remove FNTCHARCNT() altogether. fbcon_do_set_font() still needs a userfont parameter for refcount handling, I'll just add a charcount parameter to it.
Peilin
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
RFC PATCH v2 4/5 fbdev: Avoid using FNTCHARCNT() and hard-coded font charcount
In reply to Peilin YeFor user-provided fonts, the framebuffer layer is using a negative-indexing macro, FNTCHARCNT(), to keep track of their number of characters. For built-in fonts, it is using hard-coded values (256). This results in something like the following:
map.length = (ops->p->userfont) ? FNTCHARCNT(ops->p->fontdata) : 256;
Recently we added a charcount field to struct font_desc. Use it, and set vc->vc_font.charcount properly whenever vc->vc_font.data is set, so that we can use vc->vc_font.charcount instead of an if-else between FNTCHARCNT() and 256.
This patch depends on patch "Fonts: Add charcount field to font_desc".
---FNTCHARCNT() now disappeared from drivers/video/fbdev/core/. There is one more in drivers/video/console/newport_con.c, but I think that file needs to be handled separately.
Changes in v2:
- Try avoid using FNTCHARCNT() altogether, instead of only changing a little bit (Suggested by Daniel Vetter <[email protected]>)
- Change the title, since we are now removing FNTCHARCNT()
- Set vc->vc_font.charcount properly, in fbcon_startup(), fbcon_init(), fbcon_set_disp() and fbcon_do_set_font()
- Replace hard-coded 256 whenever possible
drivers/video/fbdev/core/fbcon.c | 58 ++++++++++--------------- drivers/video/fbdev/core/fbcon_rotate.c | 2 +- drivers/video/fbdev/core/tileblit.c | 3 +- 3 files changed, 25 insertions(+), 38 deletions(-)
drivers/video/fbdev/core/fbcon.c +23 -35
@@ -1004,7 +1004,7 @@ static const char *fbcon_startup(void) vc->vc_font.width = font->width; vc->vc_font.height = font->height; vc->vc_font.data = (void *)(p->fontdata = font->data); - vc->vc_font.charcount =256 ;/* FIXME Need to support more fonts */ + vc->vc_font.charcount = font->charcount; }else { p->fontdata = vc->vc_font.data; }
@@ -1032,7 +1032,7 @@ static void fbcon_init(struct vc_data *vc, int init)struct vc_data **default_mode = vc->vc_display_fg;struct vc_data *svc = *default_mode;struct fbcon_display *t, *p = &fb_display[vc->vc_num]; -int logo =1 , new_rows, new_cols, rows, cols, charcnt =256 ; +int logo =1 , new_rows, new_cols, rows, cols;int cap, ret;if (WARN_ON (info_idx ==-1 ))
@@ -1068,6 +1068,7 @@ static void fbcon_init(struct vc_data *vc, int init) fvc->vc_font.data); vc->vc_font.width = fvc->vc_font.width; vc->vc_font.height = fvc->vc_font.height; + vc->vc_font.charcount = fvc->vc_font.charcount; p->userfont = t->userfont;if (p->userfont)
@@ -1083,17 +1084,13 @@ static void fbcon_init(struct vc_data *vc, int init) vc->vc_font.width = font->width; vc->vc_font.height = font->height; vc->vc_font.data = (void *)(p->fontdata = font->data); - vc->vc_font.charcount =256 ;/* FIXME Need to -support more fonts */ + vc->vc_font.charcount = font->charcount; } } -if (p->userfont) - charcnt =FNTCHARCNT (p->fontdata); - vc->vc_can_do_color = (fb_get_color_depth (&info->var, &info->fix)!=1 ); vc->vc_complement_mask = vc->vc_can_do_color ?0x7700 :0x0800 ; -if (charcnt ==256 ) { +if (vc->vc_font.charcount ==256 ) { vc->vc_hi_font_mask =0 ; }else { vc->vc_hi_font_mask =0x100 ;
@@ -1358,7 +1355,7 @@ static void fbcon_set_disp(struct fb_info *info, struct fb_var_screeninfo *var,struct vc_data **default_mode, *vc;struct vc_data *svc;struct fbcon_ops *ops = info->fbcon_par; -int rows, cols, charcnt =256 ; +int rows, cols; p = &fb_display[unit];
@@ -1378,12 +1375,11 @@ static void fbcon_set_disp(struct fb_info *info, struct fb_var_screeninfo *var, vc->vc_font.data = (void *)(p->fontdata = t->fontdata); vc->vc_font.width = (*default_mode)->vc_font.width; vc->vc_font.height = (*default_mode)->vc_font.height; + vc->vc_font.charcount = (*default_mode)->vc_font.charcount; p->userfont = t->userfont;if (p->userfont)REFCOUNT (p->fontdata)++; } -if (p->userfont) - charcnt =FNTCHARCNT (p->fontdata); var->activate =FB_ACTIVATE_NOW ; info->var.activate = var->activate;
@@ -1393,7 +1389,7 @@ static void fbcon_set_disp(struct fb_info *info, struct fb_var_screeninfo *var, ops->var = info->var; vc->vc_can_do_color = (fb_get_color_depth (&info->var, &info->fix)!=1 ); vc->vc_complement_mask = vc->vc_can_do_color ?0x7700 :0x0800 ; -if (charcnt ==256 ) { +if (vc->vc_font.charcount ==256 ) { vc->vc_hi_font_mask =0 ; }else { vc->vc_hi_font_mask =0x100 ;
@@ -2027,7 +2023,7 @@ static int fbcon_resize(struct vc_data *vc, unsigned int width,*/ if (pitch <=0 )return -EINVAL ; - size =CALC_FONTSZ (vc->vc_font.height, pitch,FNTCHARCNT (vc->vc_font.data)); + size =CALC_FONTSZ (vc->vc_font.height, pitch, vc->vc_font.charcount);if (size >FNTSIZE (vc->vc_font.data))return -EINVAL ; }
@@ -2075,7 +2071,7 @@ static int fbcon_switch(struct vc_data *vc)struct fbcon_ops *ops;struct fbcon_display *p = &fb_display[vc->vc_num];struct fb_var_screeninfo var; -int i, ret, prev_console, charcnt =256 ; +int i, ret, prev_console; info = registered_fb[con2fb_map[vc->vc_num]]; ops = info->fbcon_par;
@@ -2152,10 +2148,7 @@ static int fbcon_switch(struct vc_data *vc) vc->vc_can_do_color = (fb_get_color_depth (&info->var, &info->fix)!=1 ); vc->vc_complement_mask = vc->vc_can_do_color ?0x7700 :0x0800 ; -if (p->userfont) - charcnt =FNTCHARCNT (vc->vc_font.data); - -if (charcnt >256 ) +if (vc->vc_font.charcount >256 ) vc->vc_complement_mask <<=1 ;updatescrollmode (p, info, vc);
@@ -2289,7 +2282,7 @@ static int fbcon_get_font(struct vc_data *vc, struct console_font *font) font->width = vc->vc_font.width; font->height = vc->vc_font.height; - font->charcount = vc->vc_hi_font_mask ?512 :256 ; + font->charcount = vc->vc_font.charcount;if (!font->data)return 0 ;
@@ -2405,31 +2398,27 @@ static void set_vc_hi_font(struct vc_data *vc, bool set) } } -static int fbcon_do_set_font (struct vc_data *vc,int w,int h, +static int fbcon_do_set_font (struct vc_data *vc,int w,int h,int charcount,const u8 * data,int userfont) {struct fb_info *info = registered_fb[con2fb_map[vc->vc_num]];struct fbcon_ops *ops = info->fbcon_par;struct fbcon_display *p = &fb_display[vc->vc_num];int resize; -int cnt;char *old_data =NULL ; resize = (w != vc->vc_font.width) || (h != vc->vc_font.height);if (p->userfont) old_data = vc->vc_font.data; -if (userfont) - cnt =FNTCHARCNT (data); -else - cnt =256 ; vc->vc_font.data = (void *)(p->fontdata = data);if ((p->userfont = userfont))REFCOUNT (data)++; vc->vc_font.width = w; vc->vc_font.height = h; -if (vc->vc_hi_font_mask && cnt ==256 ) + vc->vc_font.charcount = charcount; +if (vc->vc_hi_font_mask && charcount ==256 )set_vc_hi_font (vc, false); -else if (!vc->vc_hi_font_mask && cnt ==512 ) +else if (!vc->vc_hi_font_mask && charcount ==512 )set_vc_hi_font (vc, true);if (resize) {
@@ -2458,7 +2447,7 @@ static int fbcon_copy_font(struct vc_data *vc, int con)if (od->fontdata == f->data)return 0 ;/* already the same font... */ -return fbcon_do_set_font (vc, f->width, f->height, od->fontdata, od->userfont); +return fbcon_do_set_font (vc, f->width, f->height, f->charcount, od->fontdata, od->userfont); }/*
@@ -2506,9 +2495,10 @@ static int fbcon_set_font(struct vc_data *vc, struct console_font *font,if (!new_data)return -ENOMEM ; +memset (new_data,0 ,FONT_EXTRA_WORDS *sizeof (int )); + new_data +=FONT_EXTRA_WORDS *sizeof (int );FNTSIZE (new_data) = size; -FNTCHARCNT (new_data) = charcount;REFCOUNT (new_data) =0 ;/* usage counter */ for (i=0 ; i< charcount; i++) {memcpy (new_data + i*h*pitch, data + i*32 *pitch, h*pitch);
@@ -2534,7 +2524,7 @@ static int fbcon_set_font(struct vc_data *vc, struct console_font *font,break ; } } -return fbcon_do_set_font (vc, font->width, font->height, new_data,1 ); +return fbcon_do_set_font (vc, font->width, font->height, charcount, new_data,1 ); }static int fbcon_set_def_font (struct vc_data *vc,struct console_font *font,char *name)
@@ -2550,7 +2540,7 @@ static int fbcon_set_def_font(struct vc_data *vc, struct console_font *font, cha font->width = f->width; font->height = f->height; -return fbcon_do_set_font (vc, f->width, f->height, f->data,0 ); +return fbcon_do_set_font (vc, f->width, f->height, f->charcount, f->data,0 ); }static u16 palette_red[16 ];
@@ -3031,8 +3021,7 @@ void fbcon_get_requirement(struct fb_info *info, p = &fb_display[i]; caps->x |=1 << (vc->vc_font.width -1 ); caps->y |=1 << (vc->vc_font.height -1 ); - charcnt = (p->userfont) ? -FNTCHARCNT (p->fontdata) :256 ; + charcnt = vc->vc_font.charcount;if (caps->len < charcnt) caps->len = charcnt; }
@@ -3045,8 +3034,7 @@ void fbcon_get_requirement(struct fb_info *info, p = &fb_display[fg_console]; caps->x =1 << (vc->vc_font.width -1 ); caps->y =1 << (vc->vc_font.height -1 ); - caps->len = (p->userfont) ? -FNTCHARCNT (p->fontdata) :256 ; + caps->len = vc->vc_font.charcount; } } }
drivers/video/fbdev/core/fbcon_rotate.c +1 -1
@@ -33,7 +33,7 @@ static int fbcon_rotate_font(struct fb_info *info, struct vc_data *vc) src = ops->fontdata = vc->vc_font.data; ops->cur_rotate = ops->p->con_rotate; - len = (!ops->p->userfont) ?256 :FNTCHARCNT (src); + len = vc->vc_font.charcount; s_cellsize = ((vc->vc_font.width +7 )/8 ) * vc->vc_font.height; d_cellsize = s_cellsize;
drivers/video/fbdev/core/tileblit.c +1 -2
@@ -145,8 +145,7 @@ void fbcon_set_tileops(struct vc_data *vc, struct fb_info *info) map.width = vc->vc_font.width; map.height = vc->vc_font.height; map.depth =1 ; - map.length = (ops->p->userfont) ? -FNTCHARCNT (ops->p->fontdata) :256 ; + map.length = vc->vc_font.charcount; map.data = ops->p->fontdata; info->tileops->fb_settile (info, &map); }
Signature · 6 lines
2.25.1 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH 3/5] Fonts: Add charcount field to font_desc
In reply to Peilin YeQuoted 5 lines · Peilin Ye
Subsystems are assuming the number of characters of our built-in fonts. Include that information in our kernel font descriptor,
struct font_desc.Signed-off-by Peilin Ye <[email protected]>
atm can't merge this because we need a backmerge of maybe -rc2 into drm-misc-next first. Please remind me if this doesn't land next week. -Daniel
Quoted 188 lines
--- include/linux/font.h | 1 + lib/fonts/font_10x18.c | 1 + lib/fonts/font_6x10.c | 1 + lib/fonts/font_6x11.c | 1 + lib/fonts/font_6x8.c | 1 + lib/fonts/font_7x14.c | 1 + lib/fonts/font_8x16.c | 1 + lib/fonts/font_8x8.c | 1 + lib/fonts/font_acorn_8x8.c | 1 + lib/fonts/font_mini_4x6.c | 1 + lib/fonts/font_pearl_8x8.c | 1 + lib/fonts/font_sun12x22.c | 1 + lib/fonts/font_sun8x16.c | 1 + lib/fonts/font_ter16x32.c | 1 + 14 files changed, 14 insertions(+)include/linux/font.h +1
-0@@ -17,6 +17,7 @@ struct font_desc {int idx;const char *name;unsigned int width, height; +unsigned int charcount;const void *data;int pref; };lib/fonts/font_10x18.c +1
-0@@ -5137,6 +5137,7 @@ const struct font_desc font_10x18 = { .name = "10x18", .width = 10, .height = 18, + .charcount = 256, .data = fontdata_10x18.data, #ifdef __sparc__ .pref = 5,lib/fonts/font_6x10.c +1
-0@@ -3083,6 +3083,7 @@ const struct font_desc font_6x10 = { .name = "6x10", .width = 6, .height = 10, + .charcount = 256, .data = fontdata_6x10.data, .pref = 0, };lib/fonts/font_6x11.c +1
-0@@ -3346,6 +3346,7 @@ const struct font_desc font_vga_6x11 = { .name = "ProFont6x11", .width = 6, .height = 11, + .charcount = 256, .data = fontdata_6x11.data,/* Try avoiding this font if possible unless on MAC */ .pref = -2000,lib/fonts/font_6x8.c +1
-0@@ -2571,6 +2571,7 @@ const struct font_desc font_6x8 = { .name = "6x8", .width = 6, .height = 8, + .charcount = 256, .data = fontdata_6x8.data, .pref = 0, };lib/fonts/font_7x14.c +1
-0@@ -4113,6 +4113,7 @@ const struct font_desc font_7x14 = { .name = "7x14", .width = 7, .height = 14, + .charcount = 256, .data = fontdata_7x14.data, .pref = 0, };lib/fonts/font_8x16.c +1
-0@@ -4627,6 +4627,7 @@ const struct font_desc font_vga_8x16 = { .name = "VGA8x16", .width = 8, .height = 16, + .charcount = 256, .data = fontdata_8x16.data, .pref = 0, };lib/fonts/font_8x8.c +1
-0@@ -2578,6 +2578,7 @@ const struct font_desc font_vga_8x8 = { .name = "VGA8x8", .width = 8, .height = 8, + .charcount = 256, .data = fontdata_8x8.data, .pref = 0, };lib/fonts/font_acorn_8x8.c +1
-0@@ -270,6 +270,7 @@ const struct font_desc font_acorn_8x8 = { .name = "Acorn8x8", .width = 8, .height = 8, + .charcount = 256, .data = acorndata_8x8.data, #ifdef CONFIG_ARCH_ACORN .pref = 20,lib/fonts/font_mini_4x6.c +1
-0@@ -2152,6 +2152,7 @@ const struct font_desc font_mini_4x6 = { .name = "MINI4x6", .width = 4, .height = 6, + .charcount = 256, .data = fontdata_mini_4x6.data, .pref = 3, };lib/fonts/font_pearl_8x8.c +1
-0@@ -2582,6 +2582,7 @@ const struct font_desc font_pearl_8x8 = { .name = "PEARL8x8", .width = 8, .height = 8, + .charcount = 256, .data = fontdata_pearl8x8.data, .pref = 2, };lib/fonts/font_sun12x22.c +1
-0@@ -6156,6 +6156,7 @@ const struct font_desc font_sun_12x22 = { .name = "SUN12x22", .width = 12, .height = 22, + .charcount = 256, .data = fontdata_sun12x22.data, #ifdef __sparc__ .pref = 5,lib/fonts/font_sun8x16.c +1
-0@@ -268,6 +268,7 @@ const struct font_desc font_sun_8x16 = { .name = "SUN8x16", .width = 8, .height = 16, + .charcount = 256, .data = fontdata_sun8x16.data, #ifdef __sparc__ .pref = 10,lib/fonts/font_ter16x32.c +1
-0@@ -2062,6 +2062,7 @@ const struct font_desc font_ter_16x32 = { .name = "TER16x32", .width = 16, .height = 32, + .charcount = 256, .data = fontdata_ter16x32.data, #ifdef __sparc__ .pref = 5,Signature · 1 line
2.25.1
Signature · 7 lines
Daniel Vetter Software Engineer, Intel Corporation http://blog.ffwll.ch _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH 3/5] Fonts: Add charcount field to font_desc
Quoted 11 lines · Daniel Vetter
Quoted 5 lines · Peilin Ye
Subsystems are assuming the number of characters of our built-in fonts. Include that information in our kernel font descriptor,
struct font_desc.Signed-off-by Peilin Ye <[email protected]>Reviewed-by Daniel Vetter <[email protected]>atm can't merge this because we need a backmerge of maybe -rc2 into drm-misc-next first. Please remind me if this doesn't land next week.
Sure, thanks for reviewing these!
Peilin
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
PATCH v2 3/5 Fonts: Add charcount field to font_desc
In reply to Peilin YeSubsystems are assuming the number of characters of our built-in fonts. Include that information in our kernel font descriptor, struct font_desc.
---
Change in v2:
- Rebase onto 5.10-rc1.
include/linux/font.h | 1 + lib/fonts/font_10x18.c | 1 + lib/fonts/font_6x10.c | 1 + lib/fonts/font_6x11.c | 1 + lib/fonts/font_6x8.c | 1 + lib/fonts/font_7x14.c | 1 + lib/fonts/font_8x16.c | 1 + lib/fonts/font_8x8.c | 1 + lib/fonts/font_acorn_8x8.c | 1 + lib/fonts/font_mini_4x6.c | 1 + lib/fonts/font_pearl_8x8.c | 1 + lib/fonts/font_sun12x22.c | 1 + lib/fonts/font_sun8x16.c | 1 + lib/fonts/font_ter16x32.c | 1 + 14 files changed, 14 insertions(+)
include/linux/font.h +1 -0
@@ -17,6 +17,7 @@ struct font_desc {int idx;const char *name;int width, height; +unsigned int charcount;const void *data;int pref; };
lib/fonts/font_10x18.c +1 -0
@@ -5137,6 +5137,7 @@ const struct font_desc font_10x18 = { .name = "10x18", .width = 10, .height = 18, + .charcount = 256, .data = fontdata_10x18.data, #ifdef __sparc__ .pref = 5,
lib/fonts/font_6x10.c +1 -0
@@ -3083,6 +3083,7 @@ const struct font_desc font_6x10 = { .name = "6x10", .width = 6, .height = 10, + .charcount = 256, .data = fontdata_6x10.data, .pref = 0, };
lib/fonts/font_6x11.c +1 -0
@@ -3346,6 +3346,7 @@ const struct font_desc font_vga_6x11 = { .name = "ProFont6x11", .width = 6, .height = 11, + .charcount = 256, .data = fontdata_6x11.data,/* Try avoiding this font if possible unless on MAC */ .pref = -2000,
lib/fonts/font_6x8.c +1 -0
@@ -2571,6 +2571,7 @@ const struct font_desc font_6x8 = { .name = "6x8", .width = 6, .height = 8, + .charcount = 256, .data = fontdata_6x8.data, .pref = 0, };
lib/fonts/font_7x14.c +1 -0
@@ -4113,6 +4113,7 @@ const struct font_desc font_7x14 = { .name = "7x14", .width = 7, .height = 14, + .charcount = 256, .data = fontdata_7x14.data, .pref = 0, };
lib/fonts/font_8x16.c +1 -0
@@ -4627,6 +4627,7 @@ const struct font_desc font_vga_8x16 = { .name = "VGA8x16", .width = 8, .height = 16, + .charcount = 256, .data = fontdata_8x16.data, .pref = 0, };
lib/fonts/font_8x8.c +1 -0
@@ -2578,6 +2578,7 @@ const struct font_desc font_vga_8x8 = { .name = "VGA8x8", .width = 8, .height = 8, + .charcount = 256, .data = fontdata_8x8.data, .pref = 0, };
lib/fonts/font_acorn_8x8.c +1 -0
@@ -270,6 +270,7 @@ const struct font_desc font_acorn_8x8 = { .name = "Acorn8x8", .width = 8, .height = 8, + .charcount = 256, .data = acorndata_8x8.data, #ifdef CONFIG_ARCH_ACORN .pref = 20,
lib/fonts/font_mini_4x6.c +1 -0
@@ -2152,6 +2152,7 @@ const struct font_desc font_mini_4x6 = { .name = "MINI4x6", .width = 4, .height = 6, + .charcount = 256, .data = fontdata_mini_4x6.data, .pref = 3, };
lib/fonts/font_pearl_8x8.c +1 -0
@@ -2582,6 +2582,7 @@ const struct font_desc font_pearl_8x8 = { .name = "PEARL8x8", .width = 8, .height = 8, + .charcount = 256, .data = fontdata_pearl8x8.data, .pref = 2, };
lib/fonts/font_sun12x22.c +1 -0
@@ -6156,6 +6156,7 @@ const struct font_desc font_sun_12x22 = { .name = "SUN12x22", .width = 12, .height = 22, + .charcount = 256, .data = fontdata_sun12x22.data, #ifdef __sparc__ .pref = 5,
lib/fonts/font_sun8x16.c +1 -0
@@ -268,6 +268,7 @@ const struct font_desc font_sun_8x16 = { .name = "SUN8x16", .width = 8, .height = 16, + .charcount = 256, .data = fontdata_sun8x16.data, #ifdef __sparc__ .pref = 10,
lib/fonts/font_ter16x32.c +1 -0
@@ -2062,6 +2062,7 @@ const struct font_desc font_ter_16x32 = { .name = "TER16x32", .width = 16, .height = 32, + .charcount = 256, .data = fontdata_ter16x32.data, #ifdef __sparc__ .pref = 5,
Signature · 6 lines
2.25.1 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH 3/5 v2] Fonts: Add charcount field to font_desc
Quoted 9 lines · Peilin Ye
Subsystems are assuming the number of characters of our built-in fonts. Include that information in our kernel font descriptor,
struct font_desc.Signed-off-by Peilin Ye <[email protected]>Reviewed-by Daniel Vetter <[email protected]>---
Change in v2:
- Rebase onto 5.10-rc1.
Hm there's a tiny conflict now with this because of the unsigned vs signed discussion we've had.
Can you please rebase the remaining 3 patches onto linux-next or drm-misc-next or so and then resubmit?
Thanks, Daniel
Quoted 188 lines
include/linux/font.h | 1 + lib/fonts/font_10x18.c | 1 + lib/fonts/font_6x10.c | 1 + lib/fonts/font_6x11.c | 1 + lib/fonts/font_6x8.c | 1 + lib/fonts/font_7x14.c | 1 + lib/fonts/font_8x16.c | 1 + lib/fonts/font_8x8.c | 1 + lib/fonts/font_acorn_8x8.c | 1 + lib/fonts/font_mini_4x6.c | 1 + lib/fonts/font_pearl_8x8.c | 1 + lib/fonts/font_sun12x22.c | 1 + lib/fonts/font_sun8x16.c | 1 + lib/fonts/font_ter16x32.c | 1 + 14 files changed, 14 insertions(+)include/linux/font.h +1
-0@@ -17,6 +17,7 @@ struct font_desc {int idx;const char *name;int width, height; +unsigned int charcount;const void *data;int pref; };lib/fonts/font_10x18.c +1
-0@@ -5137,6 +5137,7 @@ const struct font_desc font_10x18 = { .name = "10x18", .width = 10, .height = 18, + .charcount = 256, .data = fontdata_10x18.data, #ifdef __sparc__ .pref = 5,lib/fonts/font_6x10.c +1
-0@@ -3083,6 +3083,7 @@ const struct font_desc font_6x10 = { .name = "6x10", .width = 6, .height = 10, + .charcount = 256, .data = fontdata_6x10.data, .pref = 0, };lib/fonts/font_6x11.c +1
-0@@ -3346,6 +3346,7 @@ const struct font_desc font_vga_6x11 = { .name = "ProFont6x11", .width = 6, .height = 11, + .charcount = 256, .data = fontdata_6x11.data,/* Try avoiding this font if possible unless on MAC */ .pref = -2000,lib/fonts/font_6x8.c +1
-0@@ -2571,6 +2571,7 @@ const struct font_desc font_6x8 = { .name = "6x8", .width = 6, .height = 8, + .charcount = 256, .data = fontdata_6x8.data, .pref = 0, };lib/fonts/font_7x14.c +1
-0@@ -4113,6 +4113,7 @@ const struct font_desc font_7x14 = { .name = "7x14", .width = 7, .height = 14, + .charcount = 256, .data = fontdata_7x14.data, .pref = 0, };lib/fonts/font_8x16.c +1
-0@@ -4627,6 +4627,7 @@ const struct font_desc font_vga_8x16 = { .name = "VGA8x16", .width = 8, .height = 16, + .charcount = 256, .data = fontdata_8x16.data, .pref = 0, };lib/fonts/font_8x8.c +1
-0@@ -2578,6 +2578,7 @@ const struct font_desc font_vga_8x8 = { .name = "VGA8x8", .width = 8, .height = 8, + .charcount = 256, .data = fontdata_8x8.data, .pref = 0, };lib/fonts/font_acorn_8x8.c +1
-0@@ -270,6 +270,7 @@ const struct font_desc font_acorn_8x8 = { .name = "Acorn8x8", .width = 8, .height = 8, + .charcount = 256, .data = acorndata_8x8.data, #ifdef CONFIG_ARCH_ACORN .pref = 20,lib/fonts/font_mini_4x6.c +1
-0@@ -2152,6 +2152,7 @@ const struct font_desc font_mini_4x6 = { .name = "MINI4x6", .width = 4, .height = 6, + .charcount = 256, .data = fontdata_mini_4x6.data, .pref = 3, };lib/fonts/font_pearl_8x8.c +1
-0@@ -2582,6 +2582,7 @@ const struct font_desc font_pearl_8x8 = { .name = "PEARL8x8", .width = 8, .height = 8, + .charcount = 256, .data = fontdata_pearl8x8.data, .pref = 2, };lib/fonts/font_sun12x22.c +1
-0@@ -6156,6 +6156,7 @@ const struct font_desc font_sun_12x22 = { .name = "SUN12x22", .width = 12, .height = 22, + .charcount = 256, .data = fontdata_sun12x22.data, #ifdef __sparc__ .pref = 5,lib/fonts/font_sun8x16.c +1
-0@@ -268,6 +268,7 @@ const struct font_desc font_sun_8x16 = { .name = "SUN8x16", .width = 8, .height = 16, + .charcount = 256, .data = fontdata_sun8x16.data, #ifdef __sparc__ .pref = 10,lib/fonts/font_ter16x32.c +1
-0@@ -2062,6 +2062,7 @@ const struct font_desc font_ter_16x32 = { .name = "TER16x32", .width = 16, .height = 32, + .charcount = 256, .data = fontdata_ter16x32.data, #ifdef __sparc__ .pref = 5,Signature · 1 line
2.25.1
Signature · 3 lines
Daniel Vetter Software Engineer, Intel Corporation http://blog.ffwll.ch
Re: [PATCH 2/5] Fonts: Make font size unsigned in font_desc
In reply to Peilin YeQuoted 5 lines · Peilin Ye
It is improper to define
widthandheightas signed instruct font_desc. Make them unsigned. Also, change the correspondingprintk()format identifiers from%dto%u, insti_select_fbfont().Signed-off-by Peilin Ye <[email protected]>
I'm not entirely sure of the motivation here ... height/width should never ever be even close to the limit here. Or have you seen integer math that could potentially go wrong if we go with unsigned instead of int? -Daniel
Quoted 36 lines
---
Build-tested.drivers/video/console/sticore.c | 2 +- include/linux/font.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)drivers/video/console/sticore.c +1
-1@@ -502,7 +502,7 @@ sti_select_fbfont(struct sti_cooked_rom *cooked_rom, const char *fbfont_name)if (!fbfont)return NULL ; -pr_info ("STI selected %dx%d framebuffer font %s for sticon\n" , +pr_info ("STI selected %ux%u framebuffer font %s for sticon\n" , fbfont->width, fbfont->height, fbfont->name); bpc = ((fbfont->width+7 )/8 ) * fbfont->height;include/linux/font.h +1
-1@@ -16,7 +16,7 @@struct font_desc {int idx;const char *name; -int width, height; +unsigned int width, height;const void *data;int pref; };Signature · 1 line
2.25.1
Signature · 7 lines
Daniel Vetter Software Engineer, Intel Corporation http://blog.ffwll.ch _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH 2/5] Fonts: Make font size unsigned in font_desc
Quoted 10 lines · Daniel Vetter
Quoted 5 lines · Peilin Ye
It is improper to define
widthandheightas signed instruct font_desc. Make them unsigned. Also, change the correspondingprintk()format identifiers from%dto%u, insti_select_fbfont().Signed-off-by Peilin Ye <[email protected]>I'm not entirely sure of the motivation here ... height/width should never ever be even close to the limit here. Or have you seen integer math that could potentially go wrong if we go with unsigned instead of int?
Oh... No, I have not. I just thought we shouldn't represent a length using a signed value. Also, width and height in console_font are unsigned int - that shouldn't matter that much though.
[3/5] doesn't hunk properly without this patch, I'll send a v2 for [3/5] soon.
Peilin
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH 2/5] Fonts: Make font size unsigned in font_desc
Quoted 8 lines · Peilin Ye
Quoted 7 lines · Daniel Vetter
Quoted 5 lines · Peilin Ye
It is improper to define
widthandheightas signed instruct font_desc. Make them unsigned. Also, change the correspondingprintk()format identifiers from%dto%u, insti_select_fbfont().Signed-off-by Peilin Ye <[email protected]>
Quoted 7 lines
Quoted 3 lines
I'm not entirely sure of the motivation here ... height/width should never ever be even close to the limit here. Or have you seen integer math that could potentially go wrong if we go with unsigned instead of int?
Oh... No, I have not. I just thought we shouldn't represent a length using a signed value. Also, width and height in
console_fontare unsigned int - that shouldn't matter that much though.
Oh this is actually a good reason, since that's the uapi structure. And so using the exact same signedness should help a bit with accidental casting bugs.
If you mention this in the commit message I think this is good to go. -Daniel
Quoted 6 lines
[3/5] doesn't hunk properly without this patch, I'll send a v2 for [3/5] soon.
Peilin
Signature · 7 lines
Daniel Vetter Software Engineer, Intel Corporation http://blog.ffwll.ch _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH 2/5] Fonts: Make font size unsigned in font_desc
Quoted 17 lines · Daniel Vetter
Quoted 8 lines · Peilin Ye
Quoted 7 lines · Daniel Vetter
Quoted 5 lines · Peilin Ye
It is improper to define
widthandheightas signed instruct font_desc. Make them unsigned. Also, change the correspondingprintk()format identifiers from%dto%u, insti_select_fbfont().Signed-off-by Peilin Ye <[email protected]>Quoted 7 lines
Quoted 3 lines
I'm not entirely sure of the motivation here ... height/width should never ever be even close to the limit here. Or have you seen integer math that could potentially go wrong if we go with unsigned instead of int?
Oh... No, I have not. I just thought we shouldn't represent a length using a signed value. Also, width and height in
console_fontare unsigned int - that shouldn't matter that much though.
Quoted 5 lines
Oh this is actually a good reason, since that's the uapi structure. And so using the exact same signedness should help a bit with accidental casting bugs.
If you mention this in the commit message I think this is good to go.
Ah, I see, v2 on the way. Please ignore [v2 3/5], that doesn't hunk with this patch in effect...
One newbie question, should I mention in the commit message, if a patch depends on another patch in the series in order to hunk properly?
Peilin
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
PATCH v2 2/5 Fonts: Make font size unsigned in font_desc
In reply to Peilin Yewidth and height are defined as unsigned in our UAPI font descriptor struct console_font. Make them unsigned in our kernel font descriptor struct font_desc, too.
Also, change the corresponding printk() format identifiers from %d to %u, in sti_select_fbfont().
---
Change in v2:
- Mention struct console_font in the commit message. (Suggested by Daniel Vetter <[email protected]>)
drivers/video/console/sticore.c | 2 +- include/linux/font.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)
drivers/video/console/sticore.c +1 -1
@@ -502,7 +502,7 @@ sti_select_fbfont(struct sti_cooked_rom *cooked_rom, const char *fbfont_name)if (!fbfont)return NULL ; -pr_info ("STI selected %dx%d framebuffer font %s for sticon\n" , +pr_info ("STI selected %ux%u framebuffer font %s for sticon\n" , fbfont->width, fbfont->height, fbfont->name); bpc = ((fbfont->width+7 )/8 ) * fbfont->height;
include/linux/font.h +1 -1
@@ -16,7 +16,7 @@struct font_desc {int idx;const char *name; -int width, height; +unsigned int width, height;const void *data;int pref; };
Signature · 6 lines
2.25.1 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
Daniel Vetter
AppliedRe: [PATCH v2 2/5] Fonts: Make font size unsigned in font_desc
Quoted 8 lines · Peilin Ye
widthandheightare defined as unsigned in our UAPI font descriptorstruct console_font. Make them unsigned in our kernel font descriptorstruct font_desc, too.Also, change the corresponding
printk()format identifiers from%dto%u, insti_select_fbfont().Signed-off-by Peilin Ye <[email protected]>
Pushed to drm-misc-next, thanks for the patch.
-Daniel
Quoted 38 lines
---
Change in v2:
- Mentionstruct console_fontin the commit message. (Suggested by Daniel Vetter <[email protected]>)drivers/video/console/sticore.c | 2 +- include/linux/font.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)drivers/video/console/sticore.c +1
-1@@ -502,7 +502,7 @@ sti_select_fbfont(struct sti_cooked_rom *cooked_rom, const char *fbfont_name)if (!fbfont)return NULL ; -pr_info ("STI selected %dx%d framebuffer font %s for sticon\n" , +pr_info ("STI selected %ux%u framebuffer font %s for sticon\n" , fbfont->width, fbfont->height, fbfont->name); bpc = ((fbfont->width+7 )/8 ) * fbfont->height;include/linux/font.h +1
-1@@ -16,7 +16,7 @@struct font_desc {int idx;const char *name; -int width, height; +unsigned int width, height;const void *data;int pref; };Signature · 1 line
2.25.1
Signature · 7 lines
Daniel Vetter Software Engineer, Intel Corporation http://blog.ffwll.ch _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
Daniel Vetter
AppliedRe: [PATCH 1/5] fbdev/atafb: Remove unused extern variables
In reply to Peilin YeQuoted 6 lines · Peilin Ye
Remove 6 unused extern variables to reduce confusion. It is worth mentioning that
lib/fonts/font_8x8.candlib/fonts/font_8x16.calso declarefontdata_8x8andfontdata_8x16respectively, and this file has nothing to do with them.Signed-off-by Peilin Ye <[email protected]>
This was unused ever since this driver was merged into 2.1.67 (I looked at historical linux git trees quickly). Save to delete I'd say, probably just copypasted from some outdated driver template that was even older.
Applied to drm-misc-next.
-Daniel
Quoted 32 lines
---
$ # Build-tested (Ubuntu 20.04) $ sudo apt install gcc-m68k-linux-gnu $ cp arch/m68k/configs/atari_defconfig .config $ make ARCH=m68k menuconfig $ make ARCH=m68k CROSS_COMPILE=m68k-linux-gnu- -j`nproc` alldrivers/video/fbdev/atafb.c | 8 -------- 1 file changed, 8 deletions(-)drivers/video/fbdev/atafb.c +0
-8@@ -240,14 +240,6 @@ static int *MV300_reg = MV300_reg_8bit;static int inverse; -extern int fontheight_8x8; -extern int fontwidth_8x8; -extern unsigned char fontdata_8x8[]; - -extern int fontheight_8x16; -extern int fontwidth_8x16; -extern unsigned char fontdata_8x16[]; -/* * struct fb_ops { * * open/release and usage marking Signature · 1 line
2.25.1
Signature · 7 lines
Daniel Vetter Software Engineer, Intel Corporation http://blog.ffwll.ch _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH 1/5] fbdev/atafb: Remove unused extern variables
In reply to Peilin YeQuoted 6 lines · Peilin Ye
Remove 6 unused extern variables to reduce confusion. It is worth mentioning that
lib/fonts/font_8x8.candlib/fonts/font_8x16.calso declarefontdata_8x8andfontdata_8x16respectively, and this file has nothing to do with them.Signed-off-by Peilin Ye <[email protected]>
Gr{oetje,eeting}s,
Geert
Signature · 9 lines
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected] In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH 1/5] fbdev/atafb: Remove unused extern variables
In reply to Peilin YeAm 27.10.20 um 17:31 schrieb Peilin Ye:
Quoted 6 lines
Remove 6 unused extern variables to reduce confusion. It is worth mentioning that
lib/fonts/font_8x8.candlib/fonts/font_8x16.calso declarefontdata_8x8andfontdata_8x16respectively, and this file has nothing to do with them.Signed-off-by Peilin Ye <[email protected]>
Quoted 30 lines
---
$ # Build-tested (Ubuntu 20.04) $ sudo apt install gcc-m68k-linux-gnu $ cp arch/m68k/configs/atari_defconfig .config $ make ARCH=m68k menuconfig $ make ARCH=m68k CROSS_COMPILE=m68k-linux-gnu- -j`nproc` alldrivers/video/fbdev/atafb.c | 8 -------- 1 file changed, 8 deletions(-)drivers/video/fbdev/atafb.c +0
-8@@ -240,14 +240,6 @@ static int *MV300_reg = MV300_reg_8bit;static int inverse; -extern int fontheight_8x8; -extern int fontwidth_8x8; -extern unsigned char fontdata_8x8[]; - -extern int fontheight_8x16; -extern int fontwidth_8x16; -extern unsigned char fontdata_8x16[]; -/* * struct fb_ops { * * open/release and usage marking
Signature · 10 lines
Thomas Zimmermann Graphics Driver Developer SUSE Software Solutions Germany GmbH Maxfeldstr. 5, 90409 Nürnberg, Germany (HRB 36809, AG Nürnberg) Geschäftsführer: Felix Imendörffer _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
Following up
In reply to Peilin YeHi Daniel,
More about the 3 things we've discussed before:
1. Cleaning up con_font_op():
(drivers/tty/vt/vt.c)
int con_font_op(struct vc_data *vc, struct console_font_op *op)
{
switch (op->op) {
case KD_FONT_OP_SET:
return con_font_set(vc, op);
case KD_FONT_OP_GET:
return con_font_get(vc, op);
case KD_FONT_OP_SET_DEFAULT:
return con_font_default(vc, op);
case KD_FONT_OP_COPY:
return con_font_copy(vc, op);
}
return -ENOSYS;
}Quoted 4 lines · Daniel Vetter
I think if we change the conf_font_get/set/default/copy functions to not take the *op struct (which is take pretty arbitrarily from one of the ioctl), but the parameters each needs directly, that would clean up the code a _lot_.
This is on my TODO list! One day I came up with some idea about fbcon.c, so I postponed this a bit...
2. Removing dummy functions, like sisusbdummycon_font_set():
Turns out, before c396a5bf457f ("console: Expand dummy functions for CFI"), they were just some macros:
-#define SISUSBCONDUMMY (void *)sisusbdummycon_dummy +static int sisusbdummycon_font_set(struct vc_data *vc,
+ struct console_font *font,
+ unsigned int flags)
+{
+ return 0;
+}
...and they had been there for a very long (10+ years) time. Removing code like this makes me a bit nervous, and...
Quoted 4 lines · Daniel Vetter
This actually does something. tbh I would not be surprises if the
fb_setutility is the only thing that uses this - with a bit of code search we could perhaps confirm this, and delete all the other implementations.
...you mentioned code search, where & what should we look at, in order to confirm it's safe to remove them?
3. Using font_desc in vc_data:
Our plan for the gradual conversion was to use a helper function to set font for a vc, but after reviewing the 300-ish occurrence of vc_font, it seems like code doesn't usually set it as a whole:
(drivers/usb/misc/sisusbvga/sisusb_con.c)
[...]
c->vc_font.height = sisusb->current_font_height;
[...]
...that's it! It only cares about the height. There are only 4 or 5
places in fbcon.c that actually set all fields of `vc_font`, like:
vc->vc_font.width = font->width;
vc->vc_font.height = font->height;
vc->vc_font.data = (void *)(p->fontdata = font->data);
vc->vc_font.charcount = 256; /* FIXME Need to support more fonts */
To make it even more complicated, `p` is a `struct fbcon_display *`,
containing yet another font data pointer (`fontdata`) that I think
should be replaced by a `font_desc *`...
In conclusion, I think it's all about a few hard problems in fbcon.c.
I'll keep trying and see how it goes.Thank you,
Peilin Ye
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: Following up
Quoted 48 lines · Peilin Ye
Hi Daniel,
More about the 3 things we've discussed before:
1. Cleaning up
con_font_op():(
drivers/tty/vt/vt.c)
intcon_font_op(struct vc_data *vc, struct console_font_op *op){ switch (op->op) { case KD_FONT_OP_SET: return con_font_set(vc, op); case KD_FONT_OP_GET: return con_font_get(vc, op); case KD_FONT_OP_SET_DEFAULT: return con_font_default(vc, op); case KD_FONT_OP_COPY: return con_font_copy(vc, op); } return -ENOSYS; }Quoted 4 lines · Daniel Vetter
I think if we change the conf_font_get/set/default/copy functions to not take the *op struct (which is take pretty arbitrarily from one of the ioctl), but the parameters each needs directly, that would clean up the code a _lot_.
This is on my TODO list! One day I came up with some idea about
fbcon.c, so I postponed this a bit...2. Removing dummy functions, like
sisusbdummycon_font_set():Turns out, before
c396a5bf457f("console: Expand dummy functions for CFI"), they were just some macros:(quoted diff) +6
-1-#define SISUSBCONDUMMY (void *)sisusbdummycon_dummy +static int sisusbdummycon_font_set(struct vc_data *vc, + struct console_font *font, + unsigned int flags) +{ + return 0; +} ...and they had been there for a very long (10+ years) time. Removing code like this makes me a bit nervous, and...
Quoted 8 lines
Quoted 4 lines · Daniel Vetter
This actually does something. tbh I would not be surprises if the
fb_setutility is the only thing that uses this - with a bit of code search we could perhaps confirm this, and delete all the other implementations....you mentioned code search, where & what should we look at, in order to confirm it's safe to remove them?
Way back there was google's code search, which was awesome. Now I just put the structure name/ioctl #define/number into google/bing/duckduckgo and see if anything turns up. Plus check how it's used in fb tools (although I just recently learned that fb-test pretty much disappeared from the internet, very hard to find the original).
If you're unsure, we can merge a patch, then wait about 1 year for any users to show up with problems. If that's not the case, assume they're all gone, or it was never used and just implemented because it was copied from somewhere else, or "just in case". There's lots of dead uapi around.
Quoted 19 lines
3. Using
font_descinvc_data:Our plan for the gradual conversion was to use a helper function to set font for a vc, but after reviewing the 300-ish occurrence of
vc_font, it seems like code doesn't usually set it as a whole:(
drivers/usb/misc/sisusbvga/sisusb_con.c)
[...]
c->vc_font.height=sisusb->current_font_height; [...]...that's it! It only cares about the height. There are only 4 or 5 places in
fbcon.cthat actually set all fields ofvc_font, like:
vc->vc_font.width=font->width;
vc->vc_font.height=font->height;
vc->vc_font.data= (void *)(p->fontdata =font->data);vc->vc_font.charcount= 256; /* FIXME Need to support more fonts */
Quoted 6 lines
To make it even more complicated,
pis astruct fbcon_display *, containing yet another font data pointer (fontdata) that I think should be replaced by afont_desc *...In conclusion, I think it's all about a few hard problems in
fbcon.c. I'll keep trying and see how it goes.
Yeah fbcon.c is pretty good horrors unfortunately :-/ -Daniel
Signature · 7 lines
Daniel Vetter Software Engineer, Intel Corporation http://blog.ffwll.ch _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: Following up
Quoted 11 lines · Daniel Vetter
Quoted 2 lines · Peilin Ye
...you mentioned code search, where & what should we look at, in order to confirm it's safe to remove them?
Way back there was google's code search, which was awesome. Now I just put the structure name/ioctl #define/number into google/bing/duckduckgo and see if anything turns up. Plus check how it's used in fb tools (although I just recently learned that fb-test pretty much disappeared from the internet, very hard to find the original).
Quoted 5 lines
If you're unsure, we can merge a patch, then wait about 1 year for any users to show up with problems. If that's not the case, assume they're all gone, or it was never used and just implemented because it was copied from somewhere else, or "just in case". There's lots of dead uapi around.
I see, it will be my next thing to do. Hopefully this will remove a lot of console_font occurrences.
Peilin
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
Quoted 5 lines · Peilin Ye
Hi Daniel, Hi Greg, Hi all,
We are planning to use
font_descinstead ofconsole_fontinvc_data, and this is just some prep work for it. It doesn't do much, but at least it removes two "FIXME"s infbcon.c:)
Btw nitpeek on how you submit patches: The threading you're using here is "deep" i.e. every patch is reply to the previous patch. The usual thing is flat, i.e. all patches are replies to the cover letter.
I think only very old versions of git had the former as a default, so not sure what's going on. But the deep threading makes piecing the conversation together quite a bit harder, at least here in mutt. -Daniel
Quoted 89 lines
Peilin Ye (5):
[1/5] fbdev/atafb: Remove unused extern variablesSearching for
fontdatagave me this infbdev/atafb.c:extern unsigned char fontdata_8x8[]; extern unsigned char fontdata_8x16[];...which freaked me out, since in
6735b4632def("Fonts: SupportFONT_EXTRA_WORDSmacros for built-in fonts") I changed them from char arrays to structures, inlib/fonts/. Fortunately it turns out these extern variables have nothing to do withlib/fonts/, and are not being used anywhere, so remove them for less confusion.m68k cross-compiled.
[2/5] Fonts: Make font size unsigned in
font_descOur goal is to use
font_desc"everywhere" in the kernel, and signedwidthandheightis inappropriate.Also, change some
printk()format identifiers inconsole/sticore.cfrom%dto%u. parisc cross-compiled.[3/5] Fonts: Add charcount field to
font_descAdd
unsigned int charcounttofont_desc, and update each of our 13 built-in fonts.[4/5] fbcon: Avoid hard-coding built-in font charcount [5/5] parisc/sticore: Avoid hard-coding built-in font charcount
Everyone (tty, fbcon, sticore, etc.) is assuming that all built-in fonts have 256 characters, and is using hard-coded 256 or 255 everywhere. These two patches removes some of them. [5/5] is parisc cross-compiled.
Now is a good time to review all
find_font()andget_default_font()callers:drivers/media/pci/solo6x10/solo6x10-enc.c 133 const struct font_desc *vga = find_font("VGA8x16"); drivers/media/test-drivers/vimc/vimc-core.c 268 const struct font_desc *font = find_font("VGA8x16"); drivers/media/test-drivers/vivid/vivid-core.c 1928 const struct font_desc *font = find_font("VGA8x16"); drivers/usb/misc/sisusbvga/sisusb.c 2285 myfont = find_font("VGA8x16"); * These 4 only care about font VGA8x16, so let them be for now; drivers/video/console/sticore.c 499 fbfont = find_font(fbfont_name); drivers/video/console/sticore.c 501 fbfont = get_default_font(1024,768, ~(u32)0, ~(u32)0); * Uses 255 and 256, (hopefully) cleaned up by [5/5];
drivers/video/fbdev/core/fbcon.c999 if (!fontname[0] || !(font =find_font(fontname)))drivers/video/fbdev/core/fbcon.c 1000 font = get_default_font(info->var.xres, drivers/video/fbdev/core/fbcon.c 1078 if (!fontname[0] || !(font = find_font(fontname))) drivers/video/fbdev/core/fbcon.c 1079 font = get_default_font(info->var.xres,* Use 256, cleaned up by [4/5];
drivers/video/fbdev/core/fbcon.c2548 else if (!(f =find_font(name)))
drivers/video/fbdev/core/fbcon.c2546 f = get_default_font(info->var.xres,info->var.yres,
* Uses 256 but no easy fix. I'll clean this up after makingfbcon_do_set_font()pass afont_descas parameter;
drivers/firmware/efi/earlycon.c234 font =get_default_font(xres, yres, -1, -1);
* Does not care about charcount.Thank you!
Peilin Yedrivers/video/console/sticore.c | 10 +++++----- drivers/video/fbdev/atafb.c | 8 -------- drivers/video/fbdev/core/fbcon.c | 5 ++--- include/linux/font.h | 3 ++- lib/fonts/font_10x18.c | 1 + lib/fonts/font_6x10.c | 1 + lib/fonts/font_6x11.c | 1 + lib/fonts/font_6x8.c | 1 + lib/fonts/font_7x14.c | 1 + lib/fonts/font_8x16.c | 1 + lib/fonts/font_8x8.c | 1 + lib/fonts/font_acorn_8x8.c | 1 + lib/fonts/font_mini_4x6.c | 1 + lib/fonts/font_pearl_8x8.c | 1 + lib/fonts/font_sun12x22.c | 1 + lib/fonts/font_sun8x16.c | 1 + lib/fonts/font_ter16x32.c | 1 + 17 files changed, 22 insertions(+), 17 deletions(-)Signature · 1 line
2.25.1
Signature · 3 lines
Daniel Vetter Software Engineer, Intel Corporation http://blog.ffwll.ch