selftests: net: bridge: add tests for IGMPv3
Subsystems (5)
Nikolay Aleksandrov
maintainercover selftests: net: bridge: add tests for IGMPv3
From: Nikolay Aleksandrov <[email protected]>
Hi,
This set adds tests for the bridge's new IGMPv3 support. The tests use precooked packets which are sent via mausezahn and the resulting state after each test is checked for proper X,Y sets, (*,G) source list, source list entry timers, (S,G) existence and flags, packet forwarding and blocking, exclude group expiration and (*,G) auto-add. The first 3 patches prepare the existing IGMPv2 tests, then patch 4 adds new helpers which are used throughout the rest of the v3 tests.
The following new tests are added:
- base case: IGMPv3 report 239.10.10.10 is_include (A)
- include -> allow report
- include -> is_include report
- include -> is_exclude report
- include -> to_exclude report
- exclude -> allow report
- exclude -> is_include report
- exclude -> is_exclude report
- exclude -> to_exclude report
- include -> block report
- exclude -> block report
- exclude timeout (move to include + entry deletion)
- S,G port entry automatic add to a *,G,exclude port
The variable names and set notation are the same as per RFC 3376, for more information check RFC 3376 sections 4.2.15 and 6.4.1. MLDv2 tests will be added by a separate patch-set.
Thanks,
Nik
Nikolay Aleksandrov (16):
selftests: net: bridge: rename current igmp tests to igmpv2
selftests: net: bridge: igmp: add support for packet source address
selftests: net: bridge: igmp: check for specific udp ip protocol
selftests: net: bridge: igmp: add IGMPv3 entries' state helpers
selftests: net: bridge: add tests for igmpv3 is_include and inc ->
allow reports
selftests: net: bridge: add test for igmpv3 inc -> is_include report
selftests: net: bridge: add test for igmpv3 inc -> is_exclude report
selftests: net: bridge: add test for igmpv3 inc -> to_exclude report
selftests: net: bridge: add test for igmpv3 exc -> allow report
selftests: net: bridge: add test for igmpv3 exc -> is_include report
selftests: net: bridge: add test for igmpv3 exc -> is_exclude report
selftests: net: bridge: add test for igmpv3 exc -> to_exclude report
selftests: net: bridge: add test for igmpv3 inc -> block report
selftests: net: bridge: add test for igmpv3 exc -> block report
selftests: net: bridge: add test for igmpv3 exclude timeout
selftests: net: bridge: add test for igmpv3 *,g auto-add
.../selftests/net/forwarding/bridge_igmp.sh | 532 +++++++++++++++++- 1 file changed, 520 insertions(+), 12 deletions(-)
Signature · 1 line
2.25.4
Nikolay Aleksandrov
maintainerPATCH 1/16 selftests: net: bridge: rename current igmp tests to igmpv2
From: Nikolay Aleksandrov <[email protected]>
To prepare the bridge_igmp.sh for IGMPv3 we need to rename the current test to IGMPv2.
--- tools/testing/selftests/net/forwarding/bridge_igmp.sh | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)
tools/testing/selftests/net/forwarding/bridge_igmp.sh +5 -5
@@ -1,7 +1,7 @@ #!/bin/bash # SPDX-License-Identifier: GPL-2.0 -ALL_TESTS="reportleave_test" +ALL_TESTS="v2reportleave_test" NUM_NETIFS=4 CHECK_TC="yes" TEST_GROUP="239.10.10.10"
@@ -110,7 +110,7 @@ mcast_packet_test() return $seen } -reportleave_test() +v2reportleave_test() { RET=0 ip address add dev $h2 $TEST_GROUP/32 autojoin
@@ -118,12 +118,12 @@ reportleave_test() sleep 5 bridge mdb show dev br0 | grep $TEST_GROUP 1>/dev/null - check_err $? "Report didn't create mdb entry for $TEST_GROUP" + check_err $? "IGMPv2 report didn't create mdb entry for $TEST_GROUP" mcast_packet_test $TEST_GROUP_MAC $TEST_GROUP $h1 $h2 check_fail $? "Traffic to $TEST_GROUP wasn't forwarded" - log_test "IGMP report $TEST_GROUP" + log_test "IGMPv2 report $TEST_GROUP" RET=0 bridge mdb show dev br0 | grep $TEST_GROUP 1>/dev/null
@@ -139,7 +139,7 @@ reportleave_test() mcast_packet_test $TEST_GROUP_MAC $TEST_GROUP $h1 $h2 check_err $? "Traffic to $TEST_GROUP was forwarded without mdb entry" - log_test "IGMP leave $TEST_GROUP" + log_test "IGMPv2 leave $TEST_GROUP" } trap cleanup EXIT
Signature · 1 line
2.25.4
Nikolay Aleksandrov
maintainerPATCH 2/16 selftests: net: bridge: igmp: add support for packet source address
In reply to Nikolay AleksandrovFrom: Nikolay Aleksandrov <[email protected]>
Add support for one more argument which specifies the source address to use. It will be later used for IGMPv3 S,G entry testing.
--- .../testing/selftests/net/forwarding/bridge_igmp.sh | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-)
tools/testing/selftests/net/forwarding/bridge_igmp.sh +7 -6
@@ -83,9 +83,10 @@ cleanup() mcast_packet_test() { local mac=$1 - local ip=$2 - local host1_if=$3 - local host2_if=$4 + local src_ip=$2 + local ip=$3 + local host1_if=$4 + local host2_if=$5 local seen=0 # Add an ACL on `host2_if` which will tell us whether the packet
@@ -94,7 +95,7 @@ mcast_packet_test() tc filter add dev $host2_if ingress protocol ip pref 1 handle 101 \ flower dst_mac $mac action drop - $MZ $host1_if -c 1 -p 64 -b $mac -B $ip -t udp "dp=4096,sp=2048" -q + $MZ $host1_if -c 1 -p 64 -b $mac -A $src_ip -B $ip -t udp "dp=4096,sp=2048" -q sleep 1 tc -j -s filter show dev $host2_if ingress \
@@ -120,7 +121,7 @@ v2reportleave_test() bridge mdb show dev br0 | grep $TEST_GROUP 1>/dev/null check_err $? "IGMPv2 report didn't create mdb entry for $TEST_GROUP" - mcast_packet_test $TEST_GROUP_MAC $TEST_GROUP $h1 $h2 + mcast_packet_test $TEST_GROUP_MAC 192.0.2.1 $TEST_GROUP $h1 $h2 check_fail $? "Traffic to $TEST_GROUP wasn't forwarded" log_test "IGMPv2 report $TEST_GROUP"
@@ -136,7 +137,7 @@ v2reportleave_test() bridge mdb show dev br0 | grep $TEST_GROUP 1>/dev/null check_fail $? "Leave didn't delete mdb entry for $TEST_GROUP" - mcast_packet_test $TEST_GROUP_MAC $TEST_GROUP $h1 $h2 + mcast_packet_test $TEST_GROUP_MAC 192.0.2.1 $TEST_GROUP $h1 $h2 check_err $? "Traffic to $TEST_GROUP was forwarded without mdb entry" log_test "IGMPv2 leave $TEST_GROUP"
Signature · 1 line
2.25.4
Nikolay Aleksandrov
maintainerPATCH 3/16 selftests: net: bridge: igmp: check for specific udp ip protocol
In reply to Nikolay AleksandrovFrom: Nikolay Aleksandrov <[email protected]>
We have to specifically check for udp protocol in addition to the mac address because in IGMPv3 tests group-specific queries will use the same mac address.
--- tools/testing/selftests/net/forwarding/bridge_igmp.sh | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
tools/testing/selftests/net/forwarding/bridge_igmp.sh +1 -1
@@ -93,7 +93,7 @@ mcast_packet_test() # was received by it or not. tc qdisc add dev $host2_if ingress tc filter add dev $host2_if ingress protocol ip pref 1 handle 101 \ - flower dst_mac $mac action drop + flower ip_proto udp dst_mac $mac action drop $MZ $host1_if -c 1 -p 64 -b $mac -A $src_ip -B $ip -t udp "dp=4096,sp=2048" -q sleep 1
Signature · 1 line
2.25.4
Nikolay Aleksandrov
maintainerPATCH 4/16 selftests: net: bridge: igmp: add IGMPv3 entries' state helpers
In reply to Nikolay AleksandrovFrom: Nikolay Aleksandrov <[email protected]>
Add helpers which will be used in subsequent tests, they are:
- check_sg_entries: check for proper source list and S,G entry existence
- check_sg_fwding: check for proper traffic forwarding/blocking
- check_sg_state: check for proper blocked/forwarding entry state
--- .../selftests/net/forwarding/bridge_igmp.sh | 67 +++++++++++++++++++ 1 file changed, 67 insertions(+)
tools/testing/selftests/net/forwarding/bridge_igmp.sh +67 -0
@@ -143,6 +143,73 @@ v2reportleave_test() log_test "IGMPv2 leave $TEST_GROUP" } +check_sg_entries() +{ + local report=$1; shift + local slist=("$@") + local sarg="" + + for src in "${slist[@]}"; do + sarg="${sarg} and .source_list[].address == \"$src\"" + done + bridge -j -d -s mdb show dev br0 \ + | jq -e ".[].mdb[] | \ + select(.grp == \"$TEST_GROUP\" and .source_list != null $sarg)" &>/dev/null + check_err $? "Wrong *,G entry source list after $report report" + + for sgent in "${slist[@]}"; do + bridge -j -d -s mdb show dev br0 \ + | jq -e ".[].mdb[] | \ + select(.grp == \"$TEST_GROUP\" and .src == \"$sgent\")" &>/dev/null + check_err $? "Missing S,G entry ($sgent, $TEST_GROUP)" + done +} + +check_sg_fwding() +{ + local should_fwd=$1; shift + local sources=("$@") + + for src in "${sources[@]}"; do + local retval=0 + + mcast_packet_test $TEST_GROUP_MAC $src $TEST_GROUP $h2 $h1 + retval=$? + if [ $should_fwd -eq 1 ]; then + check_fail $retval "Didn't forward traffic from S,G ($src, $TEST_GROUP)" + else + check_err $retval "Forwarded traffic for blocked S,G ($src, $TEST_GROUP)" + fi + done +} + +check_sg_state() +{ + local is_blocked=$1; shift + local sources=("$@") + local should_fail=1 + + if [ $is_blocked -eq 1 ]; then + should_fail=0 + fi + + for src in "${sources[@]}"; do + bridge -j -d -s mdb show dev br0 \ + | jq -e ".[].mdb[] | \ + select(.grp == \"$TEST_GROUP\" and .source_list != null) | + .source_list[] | + select(.address == \"$src\") | + select(.timer == \"0.00\")" &>/dev/null + check_err_fail $should_fail $? "Entry $src has zero timer" + + bridge -j -d -s mdb show dev br0 \ + | jq -e ".[].mdb[] | \ + select(.grp == \"$TEST_GROUP\" and .src == \"$src\" and \ + .flags[] == \"blocked\")" &>/dev/null + check_err_fail $should_fail $? "Entry $src has blocked flag" + done +} + trap cleanup EXIT setup_prepare
Signature · 1 line
2.25.4
Nikolay Aleksandrov
maintainerPATCH 5/16 selftests: net: bridge: add tests for igmpv3 is_include and inc -> allow reports
In reply to Nikolay AleksandrovFrom: Nikolay Aleksandrov <[email protected]>
First we test is_include/include mode then we build on that with allow effectively achieving:
state report result action
INCLUDE (A) ALLOW (B) INCLUDE (A+B) (B)=GMI
--- .../selftests/net/forwarding/bridge_igmp.sh | 82 ++++++++++++++++++- 1 file changed, 81 insertions(+), 1 deletion(-)
tools/testing/selftests/net/forwarding/bridge_igmp.sh +81 -1
@@ -1,11 +1,20 @@ #!/bin/bash # SPDX-License-Identifier: GPL-2.0 -ALL_TESTS="v2reportleave_test" +ALL_TESTS="v2reportleave_test v3include_test v3inc_allow_test" NUM_NETIFS=4 CHECK_TC="yes" TEST_GROUP="239.10.10.10" TEST_GROUP_MAC="01:00:5e:0a:0a:0a" + +ALL_GROUP="224.0.0.1" +ALL_MAC="01:00:5e:00:00:01" + +# IGMPv3 is_in report: grp 239.10.10.10 is_include 192.0.2.1,192.0.2.2,192.0.2.3 +MZPKT_IS_INC="22:00:9d:de:00:00:00:01:01:00:00:03:ef:0a:0a:0a:c0:00:02:01:c0:00:02:02:c0:00:02:03" +# IGMPv3 allow report: grp 239.10.10.10 allow 192.0.2.10,192.0.2.11,192.0.2.12 +MZPKT_ALLOW="22:00:99:c3:00:00:00:01:05:00:00:03:ef:0a:0a:0a:c0:00:02:0a:c0:00:02:0b:c0:00:02:0c" + source lib.sh h1_create()
@@ -210,6 +219,77 @@ check_sg_state() done } +v3include_prepare() +{ + local host1_if=$1 + local mac=$2 + local group=$3 + local X=("192.0.2.1" "192.0.2.2" "192.0.2.3") + + ip link set dev br0 type bridge mcast_igmp_version 3 + check_err $? "Could not change bridge IGMP version to 3" + + $MZ $host1_if -b $mac -c 1 -B $group -t ip "proto=2,p=$MZPKT_IS_INC" -q + sleep 1 + bridge -j -d -s mdb show dev br0 \ + | jq -e ".[].mdb[] | \ + select(.grp == \"$TEST_GROUP\" and .source_list != null)" &>/dev/null + check_err $? "Missing *,G entry with source list" + bridge -j -d -s mdb show dev br0 \ + | jq -e ".[].mdb[] | \ + select(.grp == \"$TEST_GROUP\" and \ + .source_list != null and .filter_mode == \"include\")" &>/dev/null + check_err $? "Wrong *,G entry filter mode" + check_sg_entries "is_include" "${X[@]}" +} + +v3cleanup() +{ + local port=$1 + local group=$2 + + bridge mdb del dev br0 port $port grp $group + ip link set dev br0 type bridge mcast_igmp_version 2 +} + +v3include_test() +{ + RET=0 + local X=("192.0.2.1" "192.0.2.2" "192.0.2.3") + + v3include_prepare $h1 $ALL_MAC $ALL_GROUP + + check_sg_state 0 "${X[@]}" + + check_sg_fwding 1 "${X[@]}" + check_sg_fwding 0 "192.0.2.100" + + log_test "IGMPv3 report $TEST_GROUP is_include" + + v3cleanup $swp1 $TEST_GROUP +} + +v3inc_allow_test() +{ + RET=0 + local X=("192.0.2.10" "192.0.2.11" "192.0.2.12") + + v3include_prepare $h1 $ALL_MAC $ALL_GROUP + + $MZ $h1 -c 1 -b $ALL_MAC -B $ALL_GROUP -t ip "proto=2,p=$MZPKT_ALLOW" -q + sleep 1 + check_sg_entries "allow" "${X[@]}" + + check_sg_state 0 "${X[@]}" + + check_sg_fwding 1 "${X[@]}" + check_sg_fwding 0 "192.0.2.100" + + log_test "IGMPv3 report $TEST_GROUP include -> allow" + + v3cleanup $swp1 $TEST_GROUP +} + trap cleanup EXIT setup_prepare
Signature · 1 line
2.25.4
Nikolay Aleksandrov
maintainerPATCH 6/16 selftests: net: bridge: add test for igmpv3 inc -> is_include report
In reply to Nikolay AleksandrovFrom: Nikolay Aleksandrov <[email protected]>
The test checks for the following case:
state report result action
INCLUDE (A) IS_IN (B) INCLUDE (A+B) (B)=GMI
--- .../selftests/net/forwarding/bridge_igmp.sh | 25 ++++++++++++++++++- 1 file changed, 24 insertions(+), 1 deletion(-)
tools/testing/selftests/net/forwarding/bridge_igmp.sh +24 -1
@@ -1,7 +1,7 @@ #!/bin/bash # SPDX-License-Identifier: GPL-2.0 -ALL_TESTS="v2reportleave_test v3include_test v3inc_allow_test" +ALL_TESTS="v2reportleave_test v3include_test v3inc_allow_test v3inc_is_include_test" NUM_NETIFS=4 CHECK_TC="yes" TEST_GROUP="239.10.10.10"
@@ -12,6 +12,8 @@ ALL_MAC="01:00:5e:00:00:01" # IGMPv3 is_in report: grp 239.10.10.10 is_include 192.0.2.1,192.0.2.2,192.0.2.3 MZPKT_IS_INC="22:00:9d:de:00:00:00:01:01:00:00:03:ef:0a:0a:0a:c0:00:02:01:c0:00:02:02:c0:00:02:03" +# IGMPv3 is_in report: grp 239.10.10.10 is_include 192.0.2.10,192.0.2.11,192.0.2.12 +MZPKT_IS_INC2="22:00:9d:c3:00:00:00:01:01:00:00:03:ef:0a:0a:0a:c0:00:02:0a:c0:00:02:0b:c0:00:02:0c" # IGMPv3 allow report: grp 239.10.10.10 allow 192.0.2.10,192.0.2.11,192.0.2.12 MZPKT_ALLOW="22:00:99:c3:00:00:00:01:05:00:00:03:ef:0a:0a:0a:c0:00:02:0a:c0:00:02:0b:c0:00:02:0c"
@@ -290,6 +292,27 @@ v3inc_allow_test() v3cleanup $swp1 $TEST_GROUP } +v3inc_is_include_test() +{ + RET=0 + local X=("192.0.2.10" "192.0.2.11" "192.0.2.12") + + v3include_prepare $h1 $ALL_MAC $ALL_GROUP + + $MZ $h1 -c 1 -b $ALL_MAC -B $ALL_GROUP -t ip "proto=2,p=$MZPKT_IS_INC2" -q + sleep 1 + check_sg_entries "is_include" "${X[@]}" + + check_sg_state 0 "${X[@]}" + + check_sg_fwding 1 "${X[@]}" + check_sg_fwding 0 "192.0.2.100" + + log_test "IGMPv3 report $TEST_GROUP include -> is_include" + + v3cleanup $swp1 $TEST_GROUP +} + trap cleanup EXIT setup_prepare
Signature · 1 line
2.25.4
Nikolay Aleksandrov
maintainerPATCH 7/16 selftests: net: bridge: add test for igmpv3 inc -> is_exclude report
In reply to Nikolay AleksandrovFrom: Nikolay Aleksandrov <[email protected]>
The test checks for the following case:
state report result action
INCLUDE (A) IS_EX (B) EXCLUDE (A*B,B-A) (B-A)=0
Delete (A-B) Group Timer=GMI
--- .../selftests/net/forwarding/bridge_igmp.sh | 41 ++++++++++++++++++- 1 file changed, 40 insertions(+), 1 deletion(-)
tools/testing/selftests/net/forwarding/bridge_igmp.sh +40 -1
@@ -1,7 +1,8 @@ #!/bin/bash # SPDX-License-Identifier: GPL-2.0 -ALL_TESTS="v2reportleave_test v3include_test v3inc_allow_test v3inc_is_include_test" +ALL_TESTS="v2reportleave_test v3include_test v3inc_allow_test v3inc_is_include_test \ + v3inc_is_exclude_test" NUM_NETIFS=4 CHECK_TC="yes" TEST_GROUP="239.10.10.10"
@@ -16,6 +17,8 @@ MZPKT_IS_INC="22:00:9d:de:00:00:00:01:01:00:00:03:ef:0a:0a:0a:c0:00:02:01:c0:00: MZPKT_IS_INC2="22:00:9d:c3:00:00:00:01:01:00:00:03:ef:0a:0a:0a:c0:00:02:0a:c0:00:02:0b:c0:00:02:0c" # IGMPv3 allow report: grp 239.10.10.10 allow 192.0.2.10,192.0.2.11,192.0.2.12 MZPKT_ALLOW="22:00:99:c3:00:00:00:01:05:00:00:03:ef:0a:0a:0a:c0:00:02:0a:c0:00:02:0b:c0:00:02:0c" +# IGMPv3 is_ex report: grp 239.10.10.10 is_exclude 192.0.2.1,192.0.2.2,192.0.2.20,192.0.2.21 +MZPKT_IS_EXC="22:00:da:b6:00:00:00:01:02:00:00:04:ef:0a:0a:0a:c0:00:02:01:c0:00:02:02:c0:00:02:14:c0:00:02:15" source lib.sh
@@ -313,6 +316,42 @@ v3inc_is_include_test() v3cleanup $swp1 $TEST_GROUP } +v3inc_is_exclude_test() +{ + RET=0 + local X=("192.0.2.1" "192.0.2.2") + local Y=("192.0.2.20" "192.0.2.21") + + v3include_prepare $h1 $ALL_MAC $ALL_GROUP + + $MZ $h1 -c 1 -b $ALL_MAC -B $ALL_GROUP -t ip "proto=2,p=$MZPKT_IS_EXC" -q + sleep 1 + bridge -j -d -s mdb show dev br0 \ + | jq -e ".[].mdb[] | \ + select(.grp == \"$TEST_GROUP\" and \ + .source_list != null and .filter_mode == \"exclude\")" &>/dev/null + check_err $? "Wrong *,G entry filter mode" + + check_sg_entries "is_exclude" "${X[@]}" "${Y[@]}" + + check_sg_state 0 "${X[@]}" + check_sg_state 1 "${Y[@]}" + + bridge -j -d -s mdb show dev br0 \ + | jq -e ".[].mdb[] | \ + select(.grp == \"$TEST_GROUP\" and \ + .source_list != null and + .source_list[].address == \"192.0.2.3\")" &>/dev/null + check_fail $? "Wrong *,G entry source list, 192.0.2.3 entry still exists" + + check_sg_fwding 1 "${X[@]}" 192.0.2.100 + check_sg_fwding 0 "${Y[@]}" + + log_test "IGMPv3 report $TEST_GROUP include -> is_exclude" + + v3cleanup $swp1 $TEST_GROUP +} + trap cleanup EXIT setup_prepare
Signature · 1 line
2.25.4
Nikolay Aleksandrov
maintainerPATCH 8/16 selftests: net: bridge: add test for igmpv3 inc -> to_exclude report
In reply to Nikolay AleksandrovFrom: Nikolay Aleksandrov <[email protected]>
The test checks for the following case:
state report result action
INCLUDE (A) TO_EX (B) EXCLUDE (A*B,B-A) (B-A)=0
Delete (A-B)
Send Q(G,A*B)
Group Timer=GMI--- .../selftests/net/forwarding/bridge_igmp.sh | 51 ++++++++++++++++++- 1 file changed, 50 insertions(+), 1 deletion(-)
tools/testing/selftests/net/forwarding/bridge_igmp.sh +50 -1
@@ -2,7 +2,7 @@ # SPDX-License-Identifier: GPL-2.0 ALL_TESTS="v2reportleave_test v3include_test v3inc_allow_test v3inc_is_include_test \ - v3inc_is_exclude_test" + v3inc_is_exclude_test v3inc_to_exclude_test" NUM_NETIFS=4 CHECK_TC="yes" TEST_GROUP="239.10.10.10"
@@ -19,6 +19,8 @@ MZPKT_IS_INC2="22:00:9d:c3:00:00:00:01:01:00:00:03:ef:0a:0a:0a:c0:00:02:0a:c0:00 MZPKT_ALLOW="22:00:99:c3:00:00:00:01:05:00:00:03:ef:0a:0a:0a:c0:00:02:0a:c0:00:02:0b:c0:00:02:0c" # IGMPv3 is_ex report: grp 239.10.10.10 is_exclude 192.0.2.1,192.0.2.2,192.0.2.20,192.0.2.21 MZPKT_IS_EXC="22:00:da:b6:00:00:00:01:02:00:00:04:ef:0a:0a:0a:c0:00:02:01:c0:00:02:02:c0:00:02:14:c0:00:02:15" +# IGMPv3 to_ex report: grp 239.10.10.10 to_exclude 192.0.2.1,192.0.2.20,192.0.2.30 +MZPKT_TO_EXC="22:00:9a:b1:00:00:00:01:04:00:00:03:ef:0a:0a:0a:c0:00:02:01:c0:00:02:14:c0:00:02:1e" source lib.sh
@@ -352,6 +354,53 @@ v3inc_is_exclude_test() v3cleanup $swp1 $TEST_GROUP } +v3inc_to_exclude_test() +{ + RET=0 + local X=("192.0.2.1") + local Y=("192.0.2.20" "192.0.2.30") + + v3include_prepare $h1 $ALL_MAC $ALL_GROUP + + ip link set dev br0 type bridge mcast_last_member_interval 500 + check_err $? "Could not change mcast_last_member_interval to 5s" + + $MZ $h1 -c 1 -b $ALL_MAC -B $ALL_GROUP -t ip "proto=2,p=$MZPKT_TO_EXC" -q + sleep 1 + bridge -j -d -s mdb show dev br0 \ + | jq -e ".[].mdb[] | \ + select(.grp == \"$TEST_GROUP\" and \ + .source_list != null and .filter_mode == \"exclude\")" &>/dev/null + check_err $? "Wrong *,G entry filter mode" + + check_sg_entries "to_exclude" "${X[@]}" "${Y[@]}" + + check_sg_state 0 "${X[@]}" + check_sg_state 1 "${Y[@]}" + + bridge -j -d -s mdb show dev br0 \ + | jq -e ".[].mdb[] | \ + select(.grp == \"$TEST_GROUP\" and \ + .source_list != null and + .source_list[].address == \"192.0.2.2\")" &>/dev/null + check_fail $? "Wrong *,G entry source list, 192.0.2.2 entry still exists" + bridge -j -d -s mdb show dev br0 \ + | jq -e ".[].mdb[] | \ + select(.grp == \"$TEST_GROUP\" and \ + .source_list != null and + .source_list[].address == \"192.0.2.21\")" &>/dev/null + check_fail $? "Wrong *,G entry source list, 192.0.2.21 entry still exists" + + check_sg_fwding 1 "${X[@]}" 192.0.2.100 + check_sg_fwding 0 "${Y[@]}" + + log_test "IGMPv3 report $TEST_GROUP include -> to_exclude" + + ip link set dev br0 type bridge mcast_last_member_interval 100 + + v3cleanup $swp1 $TEST_GROUP +} + trap cleanup EXIT setup_prepare
Signature · 1 line
2.25.4
Nikolay Aleksandrov
maintainerPATCH 9/16 selftests: net: bridge: add test for igmpv3 exc -> allow report
In reply to Nikolay AleksandrovFrom: Nikolay Aleksandrov <[email protected]>
The test checks for the following case:
state report result action
EXCLUDE (X,Y) ALLOW (A) EXCLUDE (X+A,Y-A) (A)=GMI
--- .../selftests/net/forwarding/bridge_igmp.sh | 83 +++++++++++++------ 1 file changed, 59 insertions(+), 24 deletions(-)
tools/testing/selftests/net/forwarding/bridge_igmp.sh +59 -24
@@ -2,7 +2,7 @@ # SPDX-License-Identifier: GPL-2.0 ALL_TESTS="v2reportleave_test v3include_test v3inc_allow_test v3inc_is_include_test \ - v3inc_is_exclude_test v3inc_to_exclude_test" + v3inc_is_exclude_test v3inc_to_exclude_test v3exc_allow_test" NUM_NETIFS=4 CHECK_TC="yes" TEST_GROUP="239.10.10.10"
@@ -17,6 +17,8 @@ MZPKT_IS_INC="22:00:9d:de:00:00:00:01:01:00:00:03:ef:0a:0a:0a:c0:00:02:01:c0:00: MZPKT_IS_INC2="22:00:9d:c3:00:00:00:01:01:00:00:03:ef:0a:0a:0a:c0:00:02:0a:c0:00:02:0b:c0:00:02:0c" # IGMPv3 allow report: grp 239.10.10.10 allow 192.0.2.10,192.0.2.11,192.0.2.12 MZPKT_ALLOW="22:00:99:c3:00:00:00:01:05:00:00:03:ef:0a:0a:0a:c0:00:02:0a:c0:00:02:0b:c0:00:02:0c" +# IGMPv3 allow report: grp 239.10.10.10 allow 192.0.2.20,192.0.2.30 +MZPKT_ALLOW2="22:00:5b:b4:00:00:00:01:05:00:00:02:ef:0a:0a:0a:c0:00:02:14:c0:00:02:1e" # IGMPv3 is_ex report: grp 239.10.10.10 is_exclude 192.0.2.1,192.0.2.2,192.0.2.20,192.0.2.21 MZPKT_IS_EXC="22:00:da:b6:00:00:00:01:02:00:00:04:ef:0a:0a:0a:c0:00:02:01:c0:00:02:02:c0:00:02:14:c0:00:02:15" # IGMPv3 to_ex report: grp 239.10.10.10 to_exclude 192.0.2.1,192.0.2.20,192.0.2.30
@@ -250,6 +252,38 @@ v3include_prepare() check_sg_entries "is_include" "${X[@]}" } +v3exclude_prepare() +{ + local host1_if=$1 + local mac=$2 + local group=$3 + local pkt=$4 + local X=("192.0.2.1" "192.0.2.2") + local Y=("192.0.2.20" "192.0.2.21") + + v3include_prepare $host1_if $mac $group + + $MZ $host1_if -c 1 -b $mac -B $group -t ip "proto=2,p=$MZPKT_IS_EXC" -q + sleep 1 + bridge -j -d -s mdb show dev br0 \ + | jq -e ".[].mdb[] | \ + select(.grp == \"$TEST_GROUP\" and \ + .source_list != null and .filter_mode == \"exclude\")" &>/dev/null + check_err $? "Wrong *,G entry filter mode" + + check_sg_entries "is_exclude" "${X[@]}" "${Y[@]}" + + check_sg_state 0 "${X[@]}" + check_sg_state 1 "${Y[@]}" + + bridge -j -d -s mdb show dev br0 \ + | jq -e ".[].mdb[] | \ + select(.grp == \"$TEST_GROUP\" and \ + .source_list != null and + .source_list[].address == \"192.0.2.3\")" &>/dev/null + check_fail $? "Wrong *,G entry source list, 192.0.2.3 entry still exists" +} + v3cleanup() { local port=$1
@@ -321,30 +355,8 @@ v3inc_is_include_test() v3inc_is_exclude_test() { RET=0 - local X=("192.0.2.1" "192.0.2.2") - local Y=("192.0.2.20" "192.0.2.21") - - v3include_prepare $h1 $ALL_MAC $ALL_GROUP - - $MZ $h1 -c 1 -b $ALL_MAC -B $ALL_GROUP -t ip "proto=2,p=$MZPKT_IS_EXC" -q - sleep 1 - bridge -j -d -s mdb show dev br0 \ - | jq -e ".[].mdb[] | \ - select(.grp == \"$TEST_GROUP\" and \ - .source_list != null and .filter_mode == \"exclude\")" &>/dev/null - check_err $? "Wrong *,G entry filter mode" - - check_sg_entries "is_exclude" "${X[@]}" "${Y[@]}" - check_sg_state 0 "${X[@]}" - check_sg_state 1 "${Y[@]}" - - bridge -j -d -s mdb show dev br0 \ - | jq -e ".[].mdb[] | \ - select(.grp == \"$TEST_GROUP\" and \ - .source_list != null and - .source_list[].address == \"192.0.2.3\")" &>/dev/null - check_fail $? "Wrong *,G entry source list, 192.0.2.3 entry still exists" + v3exclude_prepare $h1 $ALL_MAC $ALL_GROUP check_sg_fwding 1 "${X[@]}" 192.0.2.100 check_sg_fwding 0 "${Y[@]}"
@@ -401,6 +413,29 @@ v3inc_to_exclude_test() v3cleanup $swp1 $TEST_GROUP } +v3exc_allow_test() +{ + RET=0 + local X=("192.0.2.1" "192.0.2.2" "192.0.2.20" "192.0.2.30") + local Y=("192.0.2.21") + + v3exclude_prepare $h1 $ALL_MAC $ALL_GROUP + + $MZ $h1 -c 1 -b $ALL_MAC -B $ALL_GROUP -t ip "proto=2,p=$MZPKT_ALLOW2" -q + sleep 1 + check_sg_entries "allow" "${X[@]}" "${Y[@]}" + + check_sg_state 0 "${X[@]}" + check_sg_state 1 "${Y[@]}" + + check_sg_fwding 1 "${X[@]}" 192.0.2.100 + check_sg_fwding 0 "${Y[@]}" + + log_test "IGMPv3 report $TEST_GROUP exclude -> allow" + + v3cleanup $swp1 $TEST_GROUP +} + trap cleanup EXIT setup_prepare
Signature · 1 line
2.25.4
Nikolay Aleksandrov
maintainerPATCH 10/16 selftests: net: bridge: add test for igmpv3 exc -> is_include report
In reply to Nikolay AleksandrovFrom: Nikolay Aleksandrov <[email protected]>
The test checks for the following case:
state report result action
EXCLUDE (X,Y) IS_IN (A) EXCLUDE (X+A,Y-A) (A)=GMI
--- .../selftests/net/forwarding/bridge_igmp.sh | 27 ++++++++++++++++++- 1 file changed, 26 insertions(+), 1 deletion(-)
tools/testing/selftests/net/forwarding/bridge_igmp.sh +26 -1
@@ -2,7 +2,7 @@ # SPDX-License-Identifier: GPL-2.0 ALL_TESTS="v2reportleave_test v3include_test v3inc_allow_test v3inc_is_include_test \ - v3inc_is_exclude_test v3inc_to_exclude_test v3exc_allow_test" + v3inc_is_exclude_test v3inc_to_exclude_test v3exc_allow_test v3exc_is_include_test" NUM_NETIFS=4 CHECK_TC="yes" TEST_GROUP="239.10.10.10"
@@ -15,6 +15,8 @@ ALL_MAC="01:00:5e:00:00:01" MZPKT_IS_INC="22:00:9d:de:00:00:00:01:01:00:00:03:ef:0a:0a:0a:c0:00:02:01:c0:00:02:02:c0:00:02:03" # IGMPv3 is_in report: grp 239.10.10.10 is_include 192.0.2.10,192.0.2.11,192.0.2.12 MZPKT_IS_INC2="22:00:9d:c3:00:00:00:01:01:00:00:03:ef:0a:0a:0a:c0:00:02:0a:c0:00:02:0b:c0:00:02:0c" +# IGMPv3 is_in report: grp 239.10.10.10 is_include 192.0.2.20,192.0.2.30 +MZPKT_IS_INC3="22:00:5f:b4:00:00:00:01:01:00:00:02:ef:0a:0a:0a:c0:00:02:14:c0:00:02:1e" # IGMPv3 allow report: grp 239.10.10.10 allow 192.0.2.10,192.0.2.11,192.0.2.12 MZPKT_ALLOW="22:00:99:c3:00:00:00:01:05:00:00:03:ef:0a:0a:0a:c0:00:02:0a:c0:00:02:0b:c0:00:02:0c" # IGMPv3 allow report: grp 239.10.10.10 allow 192.0.2.20,192.0.2.30
@@ -436,6 +438,29 @@ v3exc_allow_test() v3cleanup $swp1 $TEST_GROUP } +v3exc_is_include_test() +{ + RET=0 + local X=("192.0.2.1" "192.0.2.2" "192.0.2.20" "192.0.2.30") + local Y=("192.0.2.21") + + v3exclude_prepare $h1 $ALL_MAC $ALL_GROUP + + $MZ $h1 -c 1 -b $ALL_MAC -B $ALL_GROUP -t ip "proto=2,p=$MZPKT_IS_INC3" -q + sleep 1 + check_sg_entries "is_include" "${X[@]}" "${Y[@]}" + + check_sg_state 0 "${X[@]}" + check_sg_state 1 "${Y[@]}" + + check_sg_fwding 1 "${X[@]}" 192.0.2.100 + check_sg_fwding 0 "${Y[@]}" + + log_test "IGMPv3 report $TEST_GROUP exclude -> is_include" + + v3cleanup $swp1 $TEST_GROUP +} + trap cleanup EXIT setup_prepare
Signature · 1 line
2.25.4
Nikolay Aleksandrov
maintainerPATCH 11/16 selftests: net: bridge: add test for igmpv3 exc -> is_exclude report
In reply to Nikolay AleksandrovFrom: Nikolay Aleksandrov <[email protected]>
The test checks for the following case:
state report result action
EXCLUDE (X,Y) IS_EX (A) EXCLUDE (A-Y,Y*A) (A-X-Y)=GMI
Delete (X-A) Delete (Y-A) Group Timer=GMI
--- .../selftests/net/forwarding/bridge_igmp.sh | 28 ++++++++++++++++++- 1 file changed, 27 insertions(+), 1 deletion(-)
tools/testing/selftests/net/forwarding/bridge_igmp.sh +27 -1
@@ -2,7 +2,8 @@ # SPDX-License-Identifier: GPL-2.0 ALL_TESTS="v2reportleave_test v3include_test v3inc_allow_test v3inc_is_include_test \ - v3inc_is_exclude_test v3inc_to_exclude_test v3exc_allow_test v3exc_is_include_test" + v3inc_is_exclude_test v3inc_to_exclude_test v3exc_allow_test v3exc_is_include_test \ + v3exc_is_exclude_test" NUM_NETIFS=4 CHECK_TC="yes" TEST_GROUP="239.10.10.10"
@@ -23,6 +24,8 @@ MZPKT_ALLOW="22:00:99:c3:00:00:00:01:05:00:00:03:ef:0a:0a:0a:c0:00:02:0a:c0:00:0 MZPKT_ALLOW2="22:00:5b:b4:00:00:00:01:05:00:00:02:ef:0a:0a:0a:c0:00:02:14:c0:00:02:1e" # IGMPv3 is_ex report: grp 239.10.10.10 is_exclude 192.0.2.1,192.0.2.2,192.0.2.20,192.0.2.21 MZPKT_IS_EXC="22:00:da:b6:00:00:00:01:02:00:00:04:ef:0a:0a:0a:c0:00:02:01:c0:00:02:02:c0:00:02:14:c0:00:02:15" +# IGMPv3 is_ex report: grp 239.10.10.10 is_exclude 192.0.2.20,192.0.2.30 +MZPKT_IS_EXC2="22:00:5e:b4:00:00:00:01:02:00:00:02:ef:0a:0a:0a:c0:00:02:14:c0:00:02:1e" # IGMPv3 to_ex report: grp 239.10.10.10 to_exclude 192.0.2.1,192.0.2.20,192.0.2.30 MZPKT_TO_EXC="22:00:9a:b1:00:00:00:01:04:00:00:03:ef:0a:0a:0a:c0:00:02:01:c0:00:02:14:c0:00:02:1e"
@@ -461,6 +464,29 @@ v3exc_is_include_test() v3cleanup $swp1 $TEST_GROUP } +v3exc_is_exclude_test() +{ + RET=0 + local X=("192.0.2.30") + local Y=("192.0.2.20") + + v3exclude_prepare $h1 $ALL_MAC $ALL_GROUP + + $MZ $h1 -c 1 -b $ALL_MAC -B $ALL_GROUP -t ip "proto=2,p=$MZPKT_IS_EXC2" -q + sleep 1 + check_sg_entries "is_exclude" "${X[@]}" "${Y[@]}" + + check_sg_state 0 "${X[@]}" + check_sg_state 1 "${Y[@]}" + + check_sg_fwding 1 "${X[@]}" 192.0.2.100 + check_sg_fwding 0 "${Y[@]}" + + log_test "IGMPv3 report $TEST_GROUP exclude -> is_exclude" + + v3cleanup $swp1 $TEST_GROUP +} + trap cleanup EXIT setup_prepare
Signature · 1 line
2.25.4
Nikolay Aleksandrov
maintainerPATCH 12/16 selftests: net: bridge: add test for igmpv3 exc -> to_exclude report
In reply to Nikolay AleksandrovFrom: Nikolay Aleksandrov <[email protected]>
The test checks for the following case:
state report result action
EXCLUDE (X,Y) TO_EX (A) EXCLUDE (A-Y,Y*A) (A-X-Y)=Group Timer
Delete (X-A)
Delete (Y-A)
Send Q(G,A-Y)
Group Timer=GMI--- .../selftests/net/forwarding/bridge_igmp.sh | 30 ++++++++++++++++++- 1 file changed, 29 insertions(+), 1 deletion(-)
tools/testing/selftests/net/forwarding/bridge_igmp.sh +29 -1
@@ -3,7 +3,7 @@ ALL_TESTS="v2reportleave_test v3include_test v3inc_allow_test v3inc_is_include_test \ v3inc_is_exclude_test v3inc_to_exclude_test v3exc_allow_test v3exc_is_include_test \ - v3exc_is_exclude_test" + v3exc_is_exclude_test v3exc_to_exclude_test" NUM_NETIFS=4 CHECK_TC="yes" TEST_GROUP="239.10.10.10"
@@ -487,6 +487,34 @@ v3exc_is_exclude_test() v3cleanup $swp1 $TEST_GROUP } +v3exc_to_exclude_test() +{ + RET=0 + local X=("192.0.2.1" "192.0.2.30") + local Y=("192.0.2.20") + + v3exclude_prepare $h1 $ALL_MAC $ALL_GROUP + + ip link set dev br0 type bridge mcast_last_member_interval 500 + check_err $? "Could not change mcast_last_member_interval to 5s" + + $MZ $h1 -c 1 -b $ALL_MAC -B $ALL_GROUP -t ip "proto=2,p=$MZPKT_TO_EXC" -q + sleep 1 + check_sg_entries "to_exclude" "${X[@]}" "${Y[@]}" + + check_sg_state 0 "${X[@]}" + check_sg_state 1 "${Y[@]}" + + check_sg_fwding 1 "${X[@]}" 192.0.2.100 + check_sg_fwding 0 "${Y[@]}" + + log_test "IGMPv3 report $TEST_GROUP exclude -> to_exclude" + + ip link set dev br0 type bridge mcast_last_member_interval 100 + + v3cleanup $swp1 $TEST_GROUP +} + trap cleanup EXIT setup_prepare
Signature · 1 line
2.25.4
Nikolay Aleksandrov
maintainerPATCH 13/16 selftests: net: bridge: add test for igmpv3 inc -> block report
In reply to Nikolay AleksandrovFrom: Nikolay Aleksandrov <[email protected]>
The test checks for the following case:
state report result action
INCLUDE (A) BLOCK (B) INCLUDE (A) Send Q(G,A*B)
--- .../selftests/net/forwarding/bridge_igmp.sh | 33 ++++++++++++++++++- 1 file changed, 32 insertions(+), 1 deletion(-)
tools/testing/selftests/net/forwarding/bridge_igmp.sh +32 -1
@@ -3,7 +3,7 @@ ALL_TESTS="v2reportleave_test v3include_test v3inc_allow_test v3inc_is_include_test \ v3inc_is_exclude_test v3inc_to_exclude_test v3exc_allow_test v3exc_is_include_test \ - v3exc_is_exclude_test v3exc_to_exclude_test" + v3exc_is_exclude_test v3exc_to_exclude_test v3inc_block_test" NUM_NETIFS=4 CHECK_TC="yes" TEST_GROUP="239.10.10.10"
@@ -28,6 +28,8 @@ MZPKT_IS_EXC="22:00:da:b6:00:00:00:01:02:00:00:04:ef:0a:0a:0a:c0:00:02:01:c0:00: MZPKT_IS_EXC2="22:00:5e:b4:00:00:00:01:02:00:00:02:ef:0a:0a:0a:c0:00:02:14:c0:00:02:1e" # IGMPv3 to_ex report: grp 239.10.10.10 to_exclude 192.0.2.1,192.0.2.20,192.0.2.30 MZPKT_TO_EXC="22:00:9a:b1:00:00:00:01:04:00:00:03:ef:0a:0a:0a:c0:00:02:01:c0:00:02:14:c0:00:02:1e" +# IGMPv3 block report: grp 239.10.10.10 block 192.0.2.1,192.0.2.20,192.0.2.30 +MZPKT_BLOCK="22:00:98:b1:00:00:00:01:06:00:00:03:ef:0a:0a:0a:c0:00:02:01:c0:00:02:14:c0:00:02:1e" source lib.sh
@@ -515,6 +517,35 @@ v3exc_to_exclude_test() v3cleanup $swp1 $TEST_GROUP } +v3inc_block_test() +{ + RET=0 + local X=("192.0.2.2" "192.0.2.3") + + v3include_prepare $h1 $ALL_MAC $ALL_GROUP + + $MZ $h1 -c 1 -b $ALL_MAC -B $ALL_GROUP -t ip "proto=2,p=$MZPKT_BLOCK" -q + # make sure the lowered timers have expired (by default 2 seconds) + sleep 3 + check_sg_entries "block" "${X[@]}" + + check_sg_state 0 "${X[@]}" + + bridge -j -d -s mdb show dev br0 \ + | jq -e ".[].mdb[] | \ + select(.grp == \"$TEST_GROUP\" and \ + .source_list != null and + .source_list[].address == \"192.0.2.1\")" &>/dev/null + check_fail $? "Wrong *,G entry source list, 192.0.2.1 entry still exists" + + check_sg_fwding 1 "${X[@]}" + check_sg_fwding 0 "192.0.2.100" + + log_test "IGMPv3 report $TEST_GROUP include -> block" + + v3cleanup $swp1 $TEST_GROUP +} + trap cleanup EXIT setup_prepare
Signature · 1 line
2.25.4
Nikolay Aleksandrov
maintainerPATCH 14/16 selftests: net: bridge: add test for igmpv3 exc -> block report
In reply to Nikolay AleksandrovFrom: Nikolay Aleksandrov <[email protected]>
The test checks for the following case:
state report result action
EXCLUDE (X,Y) BLOCK (A) EXCLUDE (X+(A-Y),Y) (A-X-Y)=Group Timer
Send Q(G,A-Y)
--- .../selftests/net/forwarding/bridge_igmp.sh | 30 ++++++++++++++++++- 1 file changed, 29 insertions(+), 1 deletion(-)
tools/testing/selftests/net/forwarding/bridge_igmp.sh +29 -1
@@ -3,7 +3,7 @@ ALL_TESTS="v2reportleave_test v3include_test v3inc_allow_test v3inc_is_include_test \ v3inc_is_exclude_test v3inc_to_exclude_test v3exc_allow_test v3exc_is_include_test \ - v3exc_is_exclude_test v3exc_to_exclude_test v3inc_block_test" + v3exc_is_exclude_test v3exc_to_exclude_test v3inc_block_test v3exc_block_test" NUM_NETIFS=4 CHECK_TC="yes" TEST_GROUP="239.10.10.10"
@@ -546,6 +546,34 @@ v3inc_block_test() v3cleanup $swp1 $TEST_GROUP } +v3exc_block_test() +{ + RET=0 + local X=("192.0.2.1" "192.0.2.2" "192.0.2.30") + local Y=("192.0.2.20" "192.0.2.21") + + v3exclude_prepare $h1 $ALL_MAC $ALL_GROUP + + ip link set dev br0 type bridge mcast_last_member_interval 500 + check_err $? "Could not change mcast_last_member_interval to 5s" + + $MZ $h1 -c 1 -b $ALL_MAC -B $ALL_GROUP -t ip "proto=2,p=$MZPKT_BLOCK" -q + sleep 1 + check_sg_entries "block" "${X[@]}" "${Y[@]}" + + check_sg_state 0 "${X[@]}" + check_sg_state 1 "${Y[@]}" + + check_sg_fwding 1 "${X[@]}" 192.0.2.100 + check_sg_fwding 0 "${Y[@]}" + + log_test "IGMPv3 report $TEST_GROUP exclude -> block" + + ip link set dev br0 type bridge mcast_last_member_interval 100 + + v3cleanup $swp1 $TEST_GROUP +} + trap cleanup EXIT setup_prepare
Signature · 1 line
2.25.4
Nikolay Aleksandrov
maintainerPATCH 15/16 selftests: net: bridge: add test for igmpv3 exclude timeout
In reply to Nikolay AleksandrovFrom: Nikolay Aleksandrov <[email protected]>
Test that when a group in exclude mode expires it changes mode to include and the blocked entries are deleted.
--- .../selftests/net/forwarding/bridge_igmp.sh | 49 ++++++++++++++++++- 1 file changed, 48 insertions(+), 1 deletion(-)
tools/testing/selftests/net/forwarding/bridge_igmp.sh +48 -1
@@ -3,7 +3,8 @@ ALL_TESTS="v2reportleave_test v3include_test v3inc_allow_test v3inc_is_include_test \ v3inc_is_exclude_test v3inc_to_exclude_test v3exc_allow_test v3exc_is_include_test \ - v3exc_is_exclude_test v3exc_to_exclude_test v3inc_block_test v3exc_block_test" + v3exc_is_exclude_test v3exc_to_exclude_test v3inc_block_test v3exc_block_test \ + v3exc_timeout_test" NUM_NETIFS=4 CHECK_TC="yes" TEST_GROUP="239.10.10.10"
@@ -574,6 +575,52 @@ v3exc_block_test() v3cleanup $swp1 $TEST_GROUP } +v3exc_timeout_test() +{ + RET=0 + local X=("192.0.2.20" "192.0.2.30") + + # GMI should be 3 seconds + ip link set dev br0 type bridge mcast_query_interval 100 mcast_query_response_interval 100 + + v3exclude_prepare $h1 $ALL_MAC $ALL_GROUP + ip link set dev br0 type bridge mcast_query_interval 500 mcast_query_response_interval 500 + $MZ $h1 -c 1 -b $ALL_MAC -B $ALL_GROUP -t ip "proto=2,p=$MZPKT_ALLOW2" -q + sleep 3 + bridge -j -d -s mdb show dev br0 \ + | jq -e ".[].mdb[] | \ + select(.grp == \"$TEST_GROUP\" and \ + .source_list != null and .filter_mode == \"include\")" &>/dev/null + check_err $? "Wrong *,G entry filter mode" + + bridge -j -d -s mdb show dev br0 \ + | jq -e ".[].mdb[] | \ + select(.grp == \"$TEST_GROUP\" and \ + .source_list != null and + .source_list[].address == \"192.0.2.1\")" &>/dev/null + check_fail $? "Wrong *,G entry source list, 192.0.2.1 entry still exists" + bridge -j -d -s mdb show dev br0 \ + | jq -e ".[].mdb[] | \ + select(.grp == \"$TEST_GROUP\" and \ + .source_list != null and + .source_list[].address == \"192.0.2.2\")" &>/dev/null + check_fail $? "Wrong *,G entry source list, 192.0.2.2 entry still exists" + + check_sg_entries "allow" "${X[@]}" + + check_sg_state 0 "${X[@]}" + + check_sg_fwding 1 "${X[@]}" + check_sg_fwding 0 192.0.2.100 + + log_test "IGMPv3 group $TEST_GROUP exclude timeout" + + ip link set dev br0 type bridge mcast_query_interval 12500 \ + mcast_query_response_interval 1000 + + v3cleanup $swp1 $TEST_GROUP +} + trap cleanup EXIT setup_prepare
Signature · 1 line
2.25.4
Nikolay Aleksandrov
maintainerPATCH 16/16 selftests: net: bridge: add test for igmpv3 *,g auto-add
In reply to Nikolay AleksandrovFrom: Nikolay Aleksandrov <[email protected]>
When we have *,G ports in exclude mode and a new S,G,port is added the kernel has to automatically create an S,G entry for each exclude port to get proper forwarding.
--- .../selftests/net/forwarding/bridge_igmp.sh | 31 ++++++++++++++++++- 1 file changed, 30 insertions(+), 1 deletion(-)
tools/testing/selftests/net/forwarding/bridge_igmp.sh +30 -1
@@ -4,7 +4,7 @@ ALL_TESTS="v2reportleave_test v3include_test v3inc_allow_test v3inc_is_include_test \ v3inc_is_exclude_test v3inc_to_exclude_test v3exc_allow_test v3exc_is_include_test \ v3exc_is_exclude_test v3exc_to_exclude_test v3inc_block_test v3exc_block_test \ - v3exc_timeout_test" + v3exc_timeout_test v3star_ex_auto_add_test" NUM_NETIFS=4 CHECK_TC="yes" TEST_GROUP="239.10.10.10"
@@ -621,6 +621,35 @@ v3exc_timeout_test() v3cleanup $swp1 $TEST_GROUP } +v3star_ex_auto_add_test() +{ + RET=0 + + v3exclude_prepare $h1 $ALL_MAC $ALL_GROUP + + $MZ $h2 -c 1 -b $ALL_MAC -B $ALL_GROUP -t ip "proto=2,p=$MZPKT_IS_INC" -q + sleep 1 + bridge -j -d -s mdb show dev br0 \ + | jq -e ".[].mdb[] | \ + select(.grp == \"$TEST_GROUP\" and .src == \"192.0.2.3\" and \ + .port == \"$swp1\")" &>/dev/null + check_err $? "S,G entry for *,G port doesn't exist" + + bridge -j -d -s mdb show dev br0 \ + | jq -e ".[].mdb[] | \ + select(.grp == \"$TEST_GROUP\" and .src == \"192.0.2.3\" and \ + .port == \"$swp1\" and \ + .flags[] == \"added_by_star_ex\")" &>/dev/null + check_err $? "Auto-added S,G entry doesn't have added_by_star_ex flag" + + check_sg_fwding 1 192.0.2.3 + + log_test "IGMPv3 S,G port entry automatic add to a *,G port" + + v3cleanup $swp1 $TEST_GROUP + v3cleanup $swp2 $TEST_GROUP +} + trap cleanup EXIT setup_prepare
Signature · 1 line
2.25.4
Quoted 22 lines · On Tue, 27 Oct 2020 20:59:18 +0200 Nikolay Aleksandrov wrote:
This set adds tests for the bridge's new IGMPv3 support. The tests use precooked packets which are sent via mausezahn and the resulting state after each test is checked for proper X,Y sets, (*,G) source list, source list entry timers, (S,G) existence and flags, packet forwarding and blocking, exclude group expiration and (*,G) auto-add. The first 3 patches prepare the existing IGMPv2 tests, then patch 4 adds new helpers which are used throughout the rest of the v3 tests.
The following new tests are added:
- base case: IGMPv3 report 239.10.10.10is_include(A)
- include -> allow report
- include ->is_includereport
- include ->is_excludereport
- include ->to_excludereport
- exclude -> allow report
- exclude ->is_includereport
- exclude ->is_excludereport
- exclude ->to_excludereport
- include -> block report
- exclude -> block report
- exclude timeout (move to include + entry deletion)
- S,G port entry automatic add to a *,G,exclude port
Quoted 3 lines
The variable names and set notation are the same as per RFC 3376, for more information check RFC 3376 sections 4.2.15 and 6.4.1. MLDv2 tests will be added by a separate patch-set.
Applied, thanks Nik!