Skip to contentSkip to conversation

UFS fixes

PATCH New Jaegeuk Kim 4 participants 16 messages Oct 24, 2020 – Oct 27, 2020

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH v3 1/1 UFS fixes

Change log from v2:
- use active_req-- instead of __ufshcd_release to avoid UFS timeout

Change log from v1:
- remove clkgating_enable check in __ufshcd_release
- use __uhfshcd_release instead of active_req.

#1 lore raw

PATCH v3 1/5 scsi: ufs: atomic update for clkgating_enable

From: Jaegeuk Kim <[email protected]>

When giving a stress test which enables/disables clkgating, we hit device timeout sometimes. This patch avoids subtle racy condition to address it.

If we use __ufshcd_release(), I've seen that gate_work can be called in parallel with ungate_work, which results in UFS timeout when doing hibern8. Should avoid it.

---
 drivers/scsi/ufs/ufshcd.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)
drivers/scsi/ufs/ufshcd.c +6 -6
index b8f573a02713..e0b479f9eb8a 100644
@@ -1807,19 +1807,19 @@ static ssize_t ufshcd_clkgate_enable_store(struct device *dev,
 		return -EINVAL;
 
 	value = !!value;
+
+	spin_lock_irqsave(hba->host->host_lock, flags);
 	if (value == hba->clk_gating.is_enabled)
 		goto out;
 
-	if (value) {
-		ufshcd_release(hba);
-	} else {
-		spin_lock_irqsave(hba->host->host_lock, flags);
+	if (value)
+		hba->clk_gating.active_reqs--;
+	else
 		hba->clk_gating.active_reqs++;
-		spin_unlock_irqrestore(hba->host->host_lock, flags);
-	}
 
 	hba->clk_gating.is_enabled = value;
 out:
+	spin_unlock_irqrestore(hba->host->host_lock, flags);
 	return count;
 }
 
Signature · 1 line
2.29.0.rc1.297.gfa9743e501-goog
#2 lore raw

Re: [PATCH v3 1/5] scsi: ufs: atomic update for clkgating_enable

Quoted 9 lines · Jaegeuk Kim

From: Jaegeuk Kim <[email protected]>

When giving a stress test which enables/disables clkgating, we hit device timeout sometimes. This patch avoids subtle racy condition to address it.

If we use __ufshcd_release(), I've seen that gate_work can be called in parallel with ungate_work, which results in UFS timeout when doing hibern8. Should avoid it.

I don't understand this comment. gate_work and ungate_work are queued on an ordered workqueue and an ordered workqueue executes at most one work item at any given time in the queued order. How can the two run in parallel?

Thanks,

Can Guo.

Quoted 35 lines
---
 drivers/scsi/ufs/ufshcd.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)
drivers/scsi/ufs/ufshcd.c +6 -6
index b8f573a02713..e0b479f9eb8a 100644
@@ -1807,19 +1807,19 @@ static ssize_t
 ufshcd_clkgate_enable_store(struct device *dev,
 		return -EINVAL;
 
 	value = !!value;
+
+	spin_lock_irqsave(hba->host->host_lock, flags);
 	if (value == hba->clk_gating.is_enabled)
 		goto out;
 
-	if (value) {
-		ufshcd_release(hba);
-	} else {
-		spin_lock_irqsave(hba->host->host_lock, flags);
+	if (value)
+		hba->clk_gating.active_reqs--;
+	else
 		hba->clk_gating.active_reqs++;
-		spin_unlock_irqrestore(hba->host->host_lock, flags);
-	}
 
 	hba->clk_gating.is_enabled = value;
 out:
+	spin_unlock_irqrestore(hba->host->host_lock, flags);
 	return count;
 }
#3 lore raw

Re: [PATCH v3 1/5] scsi: ufs: atomic update for clkgating_enable

Quoted 14 lines · Can Guo
Quoted 7 lines · Jaegeuk Kim

From: Jaegeuk Kim <[email protected]>

When giving a stress test which enables/disables clkgating, we hit device
timeout sometimes. This patch avoids subtle racy condition to address it.

Quoted 5 lines

If we use __ufshcd_release(), I've seen that gate_work can be called in parallel
with ungate_work, which results in UFS timeout when doing hibern8. Should avoid it.

Quoted 3 lines

I don't understand this comment. gate_work and ungate_work are queued on an ordered workqueue and an ordered workqueue executes at most one work item at any given time in the queued order. How can the two run in parallel?

When I hit UFS stuck, I saw this by clkgating tracepoint.

- REQ_CLK_OFF
- CLKS_OFF
- REQ_CLK_OFF
- REQ_CLKS_ON
..

By using active_req, I don't see any problem.

Quoted 40 lines

Thanks,

Can Guo.

Quoted 35 lines
---
 drivers/scsi/ufs/ufshcd.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)
drivers/scsi/ufs/ufshcd.c +6 -6
index b8f573a02713..e0b479f9eb8a 100644
@@ -1807,19 +1807,19 @@ static ssize_t
 ufshcd_clkgate_enable_store(struct device *dev,
 		return -EINVAL;
 
 	value = !!value;
+
+	spin_lock_irqsave(hba->host->host_lock, flags);
 	if (value == hba->clk_gating.is_enabled)
 		goto out;
 
-	if (value) {
-		ufshcd_release(hba);
-	} else {
-		spin_lock_irqsave(hba->host->host_lock, flags);
+	if (value)
+		hba->clk_gating.active_reqs--;
+	else
 		hba->clk_gating.active_reqs++;
-		spin_unlock_irqrestore(hba->host->host_lock, flags);
-	}
 
 	hba->clk_gating.is_enabled = value;
 out:
+	spin_unlock_irqrestore(hba->host->host_lock, flags);
 	return count;
 }
#4 lore raw

Re: [PATCH v3 1/5] scsi: ufs: atomic update for clkgating_enable

Quoted 19 lines · Jaegeuk Kim
Quoted 14 lines · Can Guo
Quoted 7 lines · Jaegeuk Kim

From: Jaegeuk Kim <[email protected]>

When giving a stress test which enables/disables clkgating, we hit device
timeout sometimes. This patch avoids subtle racy condition to address it.

Quoted 5 lines

If we use __ufshcd_release(), I've seen that gate_work can be called in parallel
with ungate_work, which results in UFS timeout when doing hibern8. Should avoid it.

Quoted 3 lines

I don't understand this comment. gate_work and ungate_work are queued on an ordered workqueue and an ordered workqueue executes at most one work item at any given time in the queued order. How can the two run in parallel?

Quoted 8 lines

When I hit UFS stuck, I saw this by clkgating tracepoint.

- REQ_CLK_OFF
- CLKS_OFF
- REQ_CLK_OFF
- REQ_CLKS_ON
..

I don't see how can you tell that the two works are running in parallel just from above trace. May I know what is the exact error by "UFS timeout when doing hibern8"?

By using __ufshcd_release() here, I do see one potential issue if your test quickly toggles on/off of clk_gating - disable it, enable it, disable it and enable it, which will cause that __ufshcd_release() being called twice, meaning we queue two gate_works back to back. So can you try below code and let me know if it helps or not? I am OK with your current change, but I would like to understand the problem. Thanks.

drivers/scsi/ufs/ufshcd.c +2 -0
index 1791bce..3eee438 100644
@@ -2271,6 +2271,8 @@ static void ufshcd_gate_work(struct work_struct *work)
        unsigned long flags;
 
        spin_lock_irqsave(hba->host->host_lock, flags);
+       if (hba->clk_gating.state == CLKS_OFF)
+               goto rel_lock;
        /*
         * In case you are here to cancel this work the gating state
         * would be marked as REQ_CLKS_ON. In this case save time by

Regards,

Can Guo.

Quoted 42 lines

By using active_req, I don't see any problem.

Quoted 40 lines

Thanks,

Can Guo.

Quoted 35 lines
---
 drivers/scsi/ufs/ufshcd.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)
drivers/scsi/ufs/ufshcd.c +6 -6
index b8f573a02713..e0b479f9eb8a 100644
@@ -1807,19 +1807,19 @@ static ssize_t
 ufshcd_clkgate_enable_store(struct device *dev,
 		return -EINVAL;
 
 	value = !!value;
+
+	spin_lock_irqsave(hba->host->host_lock, flags);
 	if (value == hba->clk_gating.is_enabled)
 		goto out;
 
-	if (value) {
-		ufshcd_release(hba);
-	} else {
-		spin_lock_irqsave(hba->host->host_lock, flags);
+	if (value)
+		hba->clk_gating.active_reqs--;
+	else
 		hba->clk_gating.active_reqs++;
-		spin_unlock_irqrestore(hba->host->host_lock, flags);
-	}
 
 	hba->clk_gating.is_enabled = value;
 out:
+	spin_unlock_irqrestore(hba->host->host_lock, flags);
 	return count;
 }
#5 lore raw

Re: [PATCH v3 1/5] scsi: ufs: atomic update for clkgating_enable

Quoted 50 lines · Can Guo
Quoted 22 lines · Jaegeuk Kim
Quoted 14 lines · Can Guo
Quoted 7 lines · Jaegeuk Kim

From: Jaegeuk Kim <[email protected]>

When giving a stress test which enables/disables clkgating, we hit device
timeout sometimes. This patch avoids subtle racy condition to address it.

Quoted 5 lines

If we use __ufshcd_release(), I've seen that gate_work can be called in parallel
with ungate_work, which results in UFS timeout when doing hibern8. Should avoid it.

Quoted 6 lines

I don't understand this comment. gate_work and ungate_work are queued on
an ordered workqueue and an ordered workqueue executes at most one work item
at any given time in the queued order. How can the two run in parallel?

Quoted 8 lines

When I hit UFS stuck, I saw this by clkgating tracepoint.

- REQ_CLK_OFF
- CLKS_OFF
- REQ_CLK_OFF
- REQ_CLKS_ON
..

I don't see how can you tell that the two works are running in parallel just from above trace. May I know what is the exact error by "UFS timeout when doing hibern8"?

By using __ufshcd_release() here, I do see one potential issue if your test quickly toggles on/off of clk_gating - disable it, enable it, disable it and enable it, which will cause that __ufshcd_release() being called twice, meaning
we queue two gate_works back to back. So can you try below code and let me know
if it helps or not? I am OK with your current change, but I would like to understand the problem. Thanks.

drivers/scsi/ufs/ufshcd.c +0 -0
index 1791bce..3eee438 100644

drivers/scsi/ufs/ufshcd.c static void ufshcd_gate_work(struct work_struct *work) · line 2278

Quoted 8 lines
drivers/scsi/ufs/ufshcd.c +2 -0
@@ -2271,6 +2271,8 @@ static void ufshcd_gate_work(struct work_struct *work)
        unsigned long flags;
 
        spin_lock_irqsave(hba->host->host_lock, flags);
+       if (hba->clk_gating.state == CLKS_OFF)
+               goto rel_lock;
        /*
         * In case you are here to cancel this work the gating state
         * would be marked as REQ_CLKS_ON. In this case save time by

This doesn't help. So, I checked this back again, and, like what you said, now suspect __ufshcd_release() which changed state to REQ_CLKS_OFF on CLKS_OFF.

With the below change, I can see the issue anymore. Let me send v4.

---
 drivers/scsi/ufs/ufshcd.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/scsi/ufs/ufshcd.c +2 -1
index b8f573a02713..cc8d5f0c3fdc 100644
@@ -1745,7 +1745,8 @@ static void __ufshcd_release(struct ufs_hba *hba)
 	if (hba->clk_gating.active_reqs || hba->clk_gating.is_suspended ||
 	    hba->ufshcd_state != UFSHCD_STATE_OPERATIONAL ||
 	    ufshcd_any_tag_in_use(hba) || hba->outstanding_tasks ||
-	    hba->active_uic_cmd || hba->uic_async_done)
+	    hba->active_uic_cmd || hba->uic_async_done ||
+	    hba->clk_gating.state == CLKS_OFF)
 		return;
 
 	hba->clk_gating.state = REQ_CLKS_OFF;
Signature · 1 line
2.29.0.rc1.297.gfa9743e501-goog
Quoted 47 lines

Regards,

Can Guo.

Quoted 42 lines

By using active_req, I don't see any problem.

Quoted 40 lines

Thanks,

Can Guo.

Quoted 35 lines
---
 drivers/scsi/ufs/ufshcd.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)
drivers/scsi/ufs/ufshcd.c +6 -6
index b8f573a02713..e0b479f9eb8a 100644
@@ -1807,19 +1807,19 @@ static ssize_t
 ufshcd_clkgate_enable_store(struct device *dev,
 		return -EINVAL;
 
 	value = !!value;
+
+	spin_lock_irqsave(hba->host->host_lock, flags);
 	if (value == hba->clk_gating.is_enabled)
 		goto out;
 
-	if (value) {
-		ufshcd_release(hba);
-	} else {
-		spin_lock_irqsave(hba->host->host_lock, flags);
+	if (value)
+		hba->clk_gating.active_reqs--;
+	else
 		hba->clk_gating.active_reqs++;
-		spin_unlock_irqrestore(hba->host->host_lock, flags);
-	}
 
 	hba->clk_gating.is_enabled = value;
 out:
+	spin_unlock_irqrestore(hba->host->host_lock, flags);
 	return count;
 }
#6 lore raw

Re: [PATCH v3 1/5] scsi: ufs: atomic update for clkgating_enable

Quoted 54 lines · Jaegeuk Kim
Quoted 53 lines · Can Guo
Quoted 22 lines · Jaegeuk Kim
Quoted 14 lines · Can Guo
Quoted 7 lines · Jaegeuk Kim

From: Jaegeuk Kim <[email protected]>

When giving a stress test which enables/disables clkgating, we hit device
timeout sometimes. This patch avoids subtle racy condition to address it.

Quoted 5 lines

If we use __ufshcd_release(), I've seen that gate_work can be called in parallel
with ungate_work, which results in UFS timeout when doing hibern8. Should avoid it.

Quoted 6 lines

I don't understand this comment. gate_work and ungate_work are queued on
an ordered workqueue and an ordered workqueue executes at most one work item
at any given time in the queued order. How can the two run in parallel?

Quoted 8 lines

When I hit UFS stuck, I saw this by clkgating tracepoint.

- REQ_CLK_OFF
- CLKS_OFF
- REQ_CLK_OFF
- REQ_CLKS_ON
..

I don't see how can you tell that the two works are running in parallel just from above trace. May I know what is the exact error by "UFS timeout when doing hibern8"?

By using __ufshcd_release() here, I do see one potential issue if your test quickly toggles on/off of clk_gating - disable it, enable it, disable it and enable it, which will cause that __ufshcd_release() being called twice, meaning
we queue two gate_works back to back. So can you try below code and let me know
if it helps or not? I am OK with your current change, but I would like to understand the problem. Thanks.

drivers/scsi/ufs/ufshcd.c +0 -0
index 1791bce..3eee438 100644
@@ -2271,6 +2271,8 @@ static void ufshcd_gate_work(struct work_struct 
 *work)
        unsigned long flags;
 
Quoted 10 lines
Quoted 6 lines
drivers/scsi/ufs/ufshcd.c +2 -0
        spin_lock_irqsave(hba->host->host_lock, flags);
+       if (hba->clk_gating.state == CLKS_OFF)
+               goto rel_lock;
        /*
         * In case you are here to cancel this work the gating state

* would be marked as REQ_CLKS_ON. In this case save time by

This doesn't help. So, I checked this back again, and, like what you said, now suspect __ufshcd_release() which changed state to REQ_CLKS_OFF on CLKS_OFF.

Aha, sorry that I gave the right analysis but wrong fix - my check won't help since it is checking CLKS_OFF, but at that moment it has become CLKS_REQ_OFF. Your fix is fulfiling the right purpose.

Thanks,

Can Guo.

Quoted 71 lines

With the below change, I can see the issue anymore. Let me send v4.

---
 drivers/scsi/ufs/ufshcd.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/scsi/ufs/ufshcd.c +2 -2
index b8f573a02713..cc8d5f0c3fdc 100644
@@ -1745,7 +1745,8 @@ static void __ufshcd_release(struct ufs_hba *hba)
 	if (hba->clk_gating.active_reqs || hba->clk_gating.is_suspended ||
 	    hba->ufshcd_state != UFSHCD_STATE_OPERATIONAL ||
 	    ufshcd_any_tag_in_use(hba) || hba->outstanding_tasks ||
-	    hba->active_uic_cmd || hba->uic_async_done)
+	    hba->active_uic_cmd || hba->uic_async_done ||
+	    hba->clk_gating.state == CLKS_OFF)
 		return;
 
 	hba->clk_gating.state = REQ_CLKS_OFF;
--

2.29.0.rc1.297.gfa9743e501-goog

Quoted 47 lines

Regards,

Can Guo.

Quoted 42 lines

By using active_req, I don't see any problem.

Quoted 40 lines

Thanks,

Can Guo.

Quoted 35 lines
---
 drivers/scsi/ufs/ufshcd.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)
drivers/scsi/ufs/ufshcd.c +6 -6
index b8f573a02713..e0b479f9eb8a 100644
@@ -1807,19 +1807,19 @@ static ssize_t
 ufshcd_clkgate_enable_store(struct device *dev,
 		return -EINVAL;
 
 	value = !!value;
+
+	spin_lock_irqsave(hba->host->host_lock, flags);
 	if (value == hba->clk_gating.is_enabled)
 		goto out;
 
-	if (value) {
-		ufshcd_release(hba);
-	} else {
-		spin_lock_irqsave(hba->host->host_lock, flags);
+	if (value)
+		hba->clk_gating.active_reqs--;
+	else
 		hba->clk_gating.active_reqs++;
-		spin_unlock_irqrestore(hba->host->host_lock, flags);
-	}
 
 	hba->clk_gating.is_enabled = value;
 out:
+	spin_unlock_irqrestore(hba->host->host_lock, flags);
 	return count;
 }
#7 lore raw

PATCH v3 2/5 scsi: ufs: clear UAC for FFU and RPMB LUNs

In reply to Jaegeuk Kim

From: Jaegeuk Kim <[email protected]>

In order to conduct FFU or RPMB operations, UFS needs to clear UAC. This patch clears it explicitly, so that we could get no failure given early execution.

---
 drivers/scsi/ufs/ufshcd.c | 70 +++++++++++++++++++++++++++++++++++----
 drivers/scsi/ufs/ufshcd.h |  1 +
 2 files changed, 65 insertions(+), 6 deletions(-)
drivers/scsi/ufs/ufshcd.c +64 -6
index e0b479f9eb8a..011e80a21170 100644
@@ -7057,7 +7057,6 @@ static inline void ufshcd_blk_pm_runtime_init(struct scsi_device *sdev)
 static int ufshcd_scsi_add_wlus(struct ufs_hba *hba)
 {
 	int ret = 0;
-	struct scsi_device *sdev_rpmb;
 	struct scsi_device *sdev_boot;
 
 	hba->sdev_ufs_device = __scsi_add_device(hba->host, 0, 0,
@@ -7070,14 +7069,14 @@ static int ufshcd_scsi_add_wlus(struct ufs_hba *hba)
 	ufshcd_blk_pm_runtime_init(hba->sdev_ufs_device);
 	scsi_device_put(hba->sdev_ufs_device);
 
-	sdev_rpmb = __scsi_add_device(hba->host, 0, 0,
+	hba->sdev_rpmb = __scsi_add_device(hba->host, 0, 0,
 		ufshcd_upiu_wlun_to_scsi_wlun(UFS_UPIU_RPMB_WLUN), NULL);
-	if (IS_ERR(sdev_rpmb)) {
-		ret = PTR_ERR(sdev_rpmb);
+	if (IS_ERR(hba->sdev_rpmb)) {
+		ret = PTR_ERR(hba->sdev_rpmb);
 		goto remove_sdev_ufs_device;
 	}
-	ufshcd_blk_pm_runtime_init(sdev_rpmb);
-	scsi_device_put(sdev_rpmb);
+	ufshcd_blk_pm_runtime_init(hba->sdev_rpmb);
+	scsi_device_put(hba->sdev_rpmb);
 
 	sdev_boot = __scsi_add_device(hba->host, 0, 0,
 		ufshcd_upiu_wlun_to_scsi_wlun(UFS_UPIU_BOOT_WLUN), NULL);
@@ -7601,6 +7600,63 @@ static int ufshcd_add_lus(struct ufs_hba *hba)
 	return ret;
 }
 
+static int
+ufshcd_send_request_sense(struct ufs_hba *hba, struct scsi_device *sdp);
+
+static int ufshcd_clear_ua_wlun(struct ufs_hba *hba, u8 wlun)
+{
+	struct scsi_device *sdp;
+	unsigned long flags;
+	int ret = 0;
+
+	spin_lock_irqsave(hba->host->host_lock, flags);
+	if (wlun  == UFS_UPIU_UFS_DEVICE_WLUN)
+		sdp = hba->sdev_ufs_device;
+	else if (wlun  == UFS_UPIU_RPMB_WLUN)
+		sdp = hba->sdev_rpmb;
+	else
+		BUG_ON(1);
+	if (sdp) {
+		ret = scsi_device_get(sdp);
+		if (!ret && !scsi_device_online(sdp)) {
+			ret = -ENODEV;
+			scsi_device_put(sdp);
+		}
+	} else {
+		ret = -ENODEV;
+	}
+	spin_unlock_irqrestore(hba->host->host_lock, flags);
+	if (ret)
+		goto out_err;
+
+	ret = ufshcd_send_request_sense(hba, sdp);
+	scsi_device_put(sdp);
+out_err:
+	if (ret)
+		dev_err(hba->dev, "%s: UAC clear LU=%x ret = %d\n",
+				__func__, wlun, ret);
+	return ret;
+}
+
+static int ufshcd_clear_ua_wluns(struct ufs_hba *hba)
+{
+	int ret = 0;
+
+	if (!hba->wlun_dev_clr_ua)
+		goto out;
+
+	ret = ufshcd_clear_ua_wlun(hba, UFS_UPIU_UFS_DEVICE_WLUN);
+	if (!ret)
+		ret = ufshcd_clear_ua_wlun(hba, UFS_UPIU_RPMB_WLUN);
+	if (!ret)
+		hba->wlun_dev_clr_ua = false;
+out:
+	if (ret)
+		dev_err(hba->dev, "%s: Failed to clear UAC WLUNS ret = %d\n",
+				__func__, ret);
+	return ret;
+}
+
 /**
  * ufshcd_probe_hba - probe hba to detect device and initialize
  * @hba: per-adapter instance
@@ -7720,6 +7776,8 @@ static void ufshcd_async_scan(void *data, async_cookie_t cookie)
 		pm_runtime_put_sync(hba->dev);
 		ufshcd_exit_clk_scaling(hba);
 		ufshcd_hba_exit(hba);
+	} else {
+		ufshcd_clear_ua_wluns(hba);
 	}
 }
 
drivers/scsi/ufs/ufshcd.h +1 -0
index 47eb1430274c..718881d038f5 100644
@@ -681,6 +681,7 @@ struct ufs_hba {
 	 * "UFS device" W-LU.
 	 */
 	struct scsi_device *sdev_ufs_device;
+	struct scsi_device *sdev_rpmb;
 
 	enum ufs_dev_pwr_mode curr_dev_pwr_mode;
 	enum uic_link_state uic_link_state;
Signature · 1 line
2.29.0.rc1.297.gfa9743e501-goog
#8 lore raw

Re: [PATCH v3 2/5] scsi: ufs: clear UAC for FFU and RPMB LUNs

Quoted 5 lines · Jaegeuk Kim

From: Jaegeuk Kim <[email protected]>

In order to conduct FFU or RPMB operations, UFS needs to clear UAC. This patch clears it explicitly, so that we could get no failure given early execution.

What's the meaning of 'given early execution'?

Quoted 127 lines
---
 drivers/scsi/ufs/ufshcd.c | 70 +++++++++++++++++++++++++++++++++++----
 drivers/scsi/ufs/ufshcd.h |  1 +
 2 files changed, 65 insertions(+), 6 deletions(-)
drivers/scsi/ufs/ufshcd.c +0 -1
index e0b479f9eb8a..011e80a21170 100644
@@ -7057,7 +7057,6 @@ static inline void
 ufshcd_blk_pm_runtime_init(struct scsi_device *sdev)
 static int ufshcd_scsi_add_wlus(struct ufs_hba *hba)
 {
 	int ret = 0;
-	struct scsi_device *sdev_rpmb;
 	struct scsi_device *sdev_boot;
 
drivers/scsi/ufs/ufshcd.c +5 -5
 	hba->sdev_ufs_device = __scsi_add_device(hba->host, 0, 0,
@@ -7070,14 +7069,14 @@ static int ufshcd_scsi_add_wlus(struct ufs_hba 
 *hba)
 	ufshcd_blk_pm_runtime_init(hba->sdev_ufs_device);
 	scsi_device_put(hba->sdev_ufs_device);
 
-	sdev_rpmb = __scsi_add_device(hba->host, 0, 0,
+	hba->sdev_rpmb = __scsi_add_device(hba->host, 0, 0,
 		ufshcd_upiu_wlun_to_scsi_wlun(UFS_UPIU_RPMB_WLUN), NULL);
-	if (IS_ERR(sdev_rpmb)) {
-		ret = PTR_ERR(sdev_rpmb);
+	if (IS_ERR(hba->sdev_rpmb)) {
+		ret = PTR_ERR(hba->sdev_rpmb);
 		goto remove_sdev_ufs_device;
 	}
-	ufshcd_blk_pm_runtime_init(sdev_rpmb);
-	scsi_device_put(sdev_rpmb);
+	ufshcd_blk_pm_runtime_init(hba->sdev_rpmb);
+	scsi_device_put(hba->sdev_rpmb);
 
 	sdev_boot = __scsi_add_device(hba->host, 0, 0,
drivers/scsi/ufs/ufshcd.c +57 -0
 		ufshcd_upiu_wlun_to_scsi_wlun(UFS_UPIU_BOOT_WLUN), NULL);
@@ -7601,6 +7600,63 @@ static int ufshcd_add_lus(struct ufs_hba *hba)
 	return ret;
 }
 
+static int
+ufshcd_send_request_sense(struct ufs_hba *hba, struct scsi_device 
 *sdp);
+
+static int ufshcd_clear_ua_wlun(struct ufs_hba *hba, u8 wlun)
+{
+	struct scsi_device *sdp;
+	unsigned long flags;
+	int ret = 0;
+
+	spin_lock_irqsave(hba->host->host_lock, flags);
+	if (wlun  == UFS_UPIU_UFS_DEVICE_WLUN)
+		sdp = hba->sdev_ufs_device;
+	else if (wlun  == UFS_UPIU_RPMB_WLUN)
+		sdp = hba->sdev_rpmb;
+	else
+		BUG_ON(1);
+	if (sdp) {
+		ret = scsi_device_get(sdp);
+		if (!ret && !scsi_device_online(sdp)) {
+			ret = -ENODEV;
+			scsi_device_put(sdp);
+		}
+	} else {
+		ret = -ENODEV;
+	}
+	spin_unlock_irqrestore(hba->host->host_lock, flags);
+	if (ret)
+		goto out_err;
+
+	ret = ufshcd_send_request_sense(hba, sdp);
+	scsi_device_put(sdp);
+out_err:
+	if (ret)
+		dev_err(hba->dev, "%s: UAC clear LU=%x ret = %d\n",
+				__func__, wlun, ret);
+	return ret;
+}
+
+static int ufshcd_clear_ua_wluns(struct ufs_hba *hba)
+{
+	int ret = 0;
+
+	if (!hba->wlun_dev_clr_ua)
+		goto out;
+
+	ret = ufshcd_clear_ua_wlun(hba, UFS_UPIU_UFS_DEVICE_WLUN);
+	if (!ret)
+		ret = ufshcd_clear_ua_wlun(hba, UFS_UPIU_RPMB_WLUN);
+	if (!ret)
+		hba->wlun_dev_clr_ua = false;
+out:
+	if (ret)
+		dev_err(hba->dev, "%s: Failed to clear UAC WLUNS ret = %d\n",
+				__func__, ret);
+	return ret;
+}
+
 /**
  * ufshcd_probe_hba - probe hba to detect device and initialize

* @hba: per-adapter instance

drivers/scsi/ufs/ufshcd.c +2 -0
@@ -7720,6 +7776,8 @@ static void ufshcd_async_scan(void *data,
 async_cookie_t cookie)
 		pm_runtime_put_sync(hba->dev);
 		ufshcd_exit_clk_scaling(hba);
 		ufshcd_hba_exit(hba);
+	} else {
+		ufshcd_clear_ua_wluns(hba);
 	}
 }
drivers/scsi/ufs/ufshcd.h +1 -0
index 47eb1430274c..718881d038f5 100644
@@ -681,6 +681,7 @@ struct ufs_hba {
 	 * "UFS device" W-LU.
 	 */
 	struct scsi_device *sdev_ufs_device;
+	struct scsi_device *sdev_rpmb;
 
 	enum ufs_dev_pwr_mode curr_dev_pwr_mode;
 	enum uic_link_state uic_link_state;
#9 lore raw

Re: [PATCH v3 2/5] scsi: ufs: clear UAC for FFU and RPMB LUNs

Quoted 10 lines · On 10/26, [email protected] wrote:
Quoted 7 lines · Jaegeuk Kim

From: Jaegeuk Kim <[email protected]>

In order to conduct FFU or RPMB operations, UFS needs to clear UAC. This patch
clears it explicitly, so that we could get no failure given early execution.

What's the meaning of 'given early execution'?

I saw there's hba->wlun_dev_clr_ua to clear UA at ufshcd_set_dev_pwr_mode(), and thus, assumed there's other path to clear UA. So, with this patch, user can try FFU or RPMB requests regardless of that being done.

Quoted 128 lines
Quoted 128 lines
---
 drivers/scsi/ufs/ufshcd.c | 70 +++++++++++++++++++++++++++++++++++----
 drivers/scsi/ufs/ufshcd.h |  1 +
 2 files changed, 65 insertions(+), 6 deletions(-)
drivers/scsi/ufs/ufshcd.c +0 -1
index e0b479f9eb8a..011e80a21170 100644
@@ -7057,7 +7057,6 @@ static inline void
 ufshcd_blk_pm_runtime_init(struct scsi_device *sdev)
 static int ufshcd_scsi_add_wlus(struct ufs_hba *hba)
 {
 	int ret = 0;
-	struct scsi_device *sdev_rpmb;
 	struct scsi_device *sdev_boot;
 
drivers/scsi/ufs/ufshcd.c +5 -5
 	hba->sdev_ufs_device = __scsi_add_device(hba->host, 0, 0,
@@ -7070,14 +7069,14 @@ static int ufshcd_scsi_add_wlus(struct ufs_hba
 *hba)
 	ufshcd_blk_pm_runtime_init(hba->sdev_ufs_device);
 	scsi_device_put(hba->sdev_ufs_device);
 
-	sdev_rpmb = __scsi_add_device(hba->host, 0, 0,
+	hba->sdev_rpmb = __scsi_add_device(hba->host, 0, 0,
 		ufshcd_upiu_wlun_to_scsi_wlun(UFS_UPIU_RPMB_WLUN), NULL);
-	if (IS_ERR(sdev_rpmb)) {
-		ret = PTR_ERR(sdev_rpmb);
+	if (IS_ERR(hba->sdev_rpmb)) {
+		ret = PTR_ERR(hba->sdev_rpmb);
 		goto remove_sdev_ufs_device;
 	}
-	ufshcd_blk_pm_runtime_init(sdev_rpmb);
-	scsi_device_put(sdev_rpmb);
+	ufshcd_blk_pm_runtime_init(hba->sdev_rpmb);
+	scsi_device_put(hba->sdev_rpmb);
 
 	sdev_boot = __scsi_add_device(hba->host, 0, 0,
drivers/scsi/ufs/ufshcd.c +57 -0
 		ufshcd_upiu_wlun_to_scsi_wlun(UFS_UPIU_BOOT_WLUN), NULL);
@@ -7601,6 +7600,63 @@ static int ufshcd_add_lus(struct ufs_hba *hba)
 	return ret;
 }
 
+static int
+ufshcd_send_request_sense(struct ufs_hba *hba, struct scsi_device
 *sdp);
+
+static int ufshcd_clear_ua_wlun(struct ufs_hba *hba, u8 wlun)
+{
+	struct scsi_device *sdp;
+	unsigned long flags;
+	int ret = 0;
+
+	spin_lock_irqsave(hba->host->host_lock, flags);
+	if (wlun  == UFS_UPIU_UFS_DEVICE_WLUN)
+		sdp = hba->sdev_ufs_device;
+	else if (wlun  == UFS_UPIU_RPMB_WLUN)
+		sdp = hba->sdev_rpmb;
+	else
+		BUG_ON(1);
+	if (sdp) {
+		ret = scsi_device_get(sdp);
+		if (!ret && !scsi_device_online(sdp)) {
+			ret = -ENODEV;
+			scsi_device_put(sdp);
+		}
+	} else {
+		ret = -ENODEV;
+	}
+	spin_unlock_irqrestore(hba->host->host_lock, flags);
+	if (ret)
+		goto out_err;
+
+	ret = ufshcd_send_request_sense(hba, sdp);
+	scsi_device_put(sdp);
+out_err:
+	if (ret)
+		dev_err(hba->dev, "%s: UAC clear LU=%x ret = %d\n",
+				__func__, wlun, ret);
+	return ret;
+}
+
+static int ufshcd_clear_ua_wluns(struct ufs_hba *hba)
+{
+	int ret = 0;
+
+	if (!hba->wlun_dev_clr_ua)
+		goto out;
+
+	ret = ufshcd_clear_ua_wlun(hba, UFS_UPIU_UFS_DEVICE_WLUN);
+	if (!ret)
+		ret = ufshcd_clear_ua_wlun(hba, UFS_UPIU_RPMB_WLUN);
+	if (!ret)
+		hba->wlun_dev_clr_ua = false;
+out:
+	if (ret)
+		dev_err(hba->dev, "%s: Failed to clear UAC WLUNS ret = %d\n",
+				__func__, ret);
+	return ret;
+}
+
 /**
  * ufshcd_probe_hba - probe hba to detect device and initialize

* @hba: per-adapter instance

drivers/scsi/ufs/ufshcd.c +2 -0
@@ -7720,6 +7776,8 @@ static void ufshcd_async_scan(void *data,
 async_cookie_t cookie)
 		pm_runtime_put_sync(hba->dev);
 		ufshcd_exit_clk_scaling(hba);
 		ufshcd_hba_exit(hba);
+	} else {
+		ufshcd_clear_ua_wluns(hba);
 	}
 }
drivers/scsi/ufs/ufshcd.h +1 -0
index 47eb1430274c..718881d038f5 100644
@@ -681,6 +681,7 @@ struct ufs_hba {
 	 * "UFS device" W-LU.
 	 */
 	struct scsi_device *sdev_ufs_device;
+	struct scsi_device *sdev_rpmb;
 
 	enum ufs_dev_pwr_mode curr_dev_pwr_mode;
 	enum uic_link_state uic_link_state;
#10 lore raw

Re: [PATCH v3 2/5] scsi: ufs: clear UAC for FFU and RPMB LUNs

In reply to Jaegeuk Kim
I love your patch! Perhaps something to improve:

Hi Jaegeuk,

I love your patch! Perhaps something to improve:

[auto build test WARNING on scsi/for-next]
[also build test WARNING on mkp-scsi/for-next linus/master linux/master v5.10-rc1 next-20201027] [If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]

url:    https://github.com/0day-ci/linux/commits/Jaegeuk-Kim/scsi-ufs-atomic-update-for-clkgating_enable/20201025-000720
base:   https://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi.git for-next
config: x86_64-randconfig-a012-20201027 (attached as .config)
compiler: clang version 12.0.0 (https://github.com/llvm/llvm-project f2c25c70791de95d2466e09b5b58fc37f6ccd7a4)

reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross
# install x86_64 cross compiling tool for clang build
# apt-get install binutils-x86-64-linux-gnu
# https://github.com/0day-ci/linux/commit/48327c0914e146090df19aaa6df3f0ed569d9669
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review Jaegeuk-Kim/scsi-ufs-atomic-update-for-clkgating_enable/20201025-000720 git checkout 48327c0914e146090df19aaa6df3f0ed569d9669
# save the attached .config to linux build tree
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross ARCH=x86_64

If you fix the issue, kindly add following tag as appropriate

All warnings (new ones prefixed by >>):

>> drivers/scsi/ufs/ufshcd.c:7618:3: warning: variable 'sdp' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized]
                   BUG_ON(1);
                   ^~~~~~~~~
   include/asm-generic/bug.h:63:32: note: expanded from macro 'BUG_ON'
   #define BUG_ON(condition) do { if (unlikely(condition)) BUG(); } while (0)
                                  ^~~~~~~~~~~~~~~~~~~~~~~~
   include/linux/compiler.h:56:28: note: expanded from macro 'if'
   #define if(cond, ...) if ( __trace_if_var( !!(cond , ## __VA_ARGS__) ) )
                              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   include/linux/compiler.h:58:30: note: expanded from macro '__trace_if_var'
   #define __trace_if_var(cond) (__builtin_constant_p(cond) ? (cond) : __trace_if_value(cond))
                                ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/scsi/ufs/ufshcd.c:7619:6: note: uninitialized use occurs here
           if (sdp) {
               ^~~
   include/linux/compiler.h:56:47: note: expanded from macro 'if'
   #define if(cond, ...) if ( __trace_if_var( !!(cond , ## __VA_ARGS__) ) )
                                                 ^~~~
   include/linux/compiler.h:58:52: note: expanded from macro '__trace_if_var'
   #define __trace_if_var(cond) (__builtin_constant_p(cond) ? (cond) : __trace_if_value(cond))
                                                      ^~~~
   drivers/scsi/ufs/ufshcd.c:7618:3: note: remove the 'if' if its condition is always true
                   BUG_ON(1);
                   ^
   include/asm-generic/bug.h:63:32: note: expanded from macro 'BUG_ON'
   #define BUG_ON(condition) do { if (unlikely(condition)) BUG(); } while (0)
                                  ^
   include/linux/compiler.h:56:23: note: expanded from macro 'if'
   #define if(cond, ...) if ( __trace_if_var( !!(cond , ## __VA_ARGS__) ) )
                         ^
   drivers/scsi/ufs/ufshcd.c:7608:25: note: initialize the variable 'sdp' to silence this warning
           struct scsi_device *sdp;
                                  ^
                                   = NULL

1 warning generated.

vim +7618 drivers/scsi/ufs/ufshcd.c

7605
7606 static int ufshcd_clear_ua_wlun(struct ufs_hba *hba, u8 wlun)
7607 {
7608 struct scsi_device *sdp;
7609 unsigned long flags;
7610 int ret = 0;
7611
7612 spin_lock_irqsave(hba->host->host_lock, flags);
7613 if (wlun == UFS_UPIU_UFS_DEVICE_WLUN)
7614 sdp = hba->sdev_ufs_device;
7615 else if (wlun == UFS_UPIU_RPMB_WLUN)
7616 sdp = hba->sdev_rpmb;
7617 else

> 7618			BUG_ON(1);

7619 if (sdp) {
7620 ret = scsi_device_get(sdp);
7621 if (!ret && !scsi_device_online(sdp)) {
7622 ret = -ENODEV;
7623 scsi_device_put(sdp);
7624 }
7625 } else {
7626 ret = -ENODEV;
7627 }
7628 spin_unlock_irqrestore(hba->host->host_lock, flags);
7629 if (ret)
7630 goto out_err;
7631
7632 ret = ufshcd_send_request_sense(hba, sdp);
7633 scsi_device_put(sdp);
7634 out_err:
7635 if (ret)
7636 dev_err(hba->dev, "%s: UAC clear LU=%x ret = %d\n",
7637 __func__, wlun, ret);
7638 return ret;
7639 }
7640

---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all(a)lists.01.org

#11 lore raw

PATCH v3 3/5 scsi: ufs: use WQ_HIGHPRI for gating work

In reply to Jaegeuk Kim

From: Jaegeuk Kim <[email protected]>

Must have WQ_MEM_RECLAIM
``WQ_MEM_RECLAIM``
All wq which might be used in the memory reclaim paths **MUST** have this flag set. The wq is guaranteed to have at least one execution context regardless of memory pressure.

---
 drivers/scsi/ufs/ufshcd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/scsi/ufs/ufshcd.c +1 -1
index 011e80a21170..bc0d623aed66 100644
@@ -1867,7 +1867,7 @@ static void ufshcd_init_clk_gating(struct ufs_hba *hba)
 	snprintf(wq_name, ARRAY_SIZE(wq_name), "ufs_clk_gating_%d",
 		 hba->host->host_no);
 	hba->clk_gating.clk_gating_workq = alloc_ordered_workqueue(wq_name,
-							   WQ_MEM_RECLAIM);
+					WQ_MEM_RECLAIM | WQ_HIGHPRI);
 
 	hba->clk_gating.is_enabled = true;
 
Signature · 1 line
2.29.0.rc1.297.gfa9743e501-goog
Reviewed-by on v3 3/5
#12 lore raw

Re: [PATCH v3 3/5] scsi: ufs: use WQ_HIGHPRI for gating work

Quoted 10 lines · Jaegeuk Kim

From: Jaegeuk Kim <[email protected]>

Must have WQ_MEM_RECLAIM
``WQ_MEM_RECLAIM``
All wq which might be used in the memory reclaim paths **MUST** have this flag set. The wq is guaranteed to have at least one execution context regardless of memory pressure.

---

Quoted 16 lines
 drivers/scsi/ufs/ufshcd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/scsi/ufs/ufshcd.c +1 -1
index 011e80a21170..bc0d623aed66 100644
@@ -1867,7 +1867,7 @@ static void ufshcd_init_clk_gating(struct ufs_hba 
 *hba)
 	snprintf(wq_name, ARRAY_SIZE(wq_name), "ufs_clk_gating_%d",
 		 hba->host->host_no);
 	hba->clk_gating.clk_gating_workq = alloc_ordered_workqueue(wq_name,
-							   WQ_MEM_RECLAIM);
+					WQ_MEM_RECLAIM | WQ_HIGHPRI);
 
 	hba->clk_gating.is_enabled = true;
#13 lore raw

PATCH v3 4/5 scsi: add more contexts in the ufs tracepoints

In reply to Jaegeuk Kim

From: Jaegeuk Kim <[email protected]>

This adds user-friendly tracepoints with group id.

---
 drivers/scsi/ufs/ufshcd.c  |  6 ++++--
 include/trace/events/ufs.h | 21 +++++++++++++++++----
 2 files changed, 21 insertions(+), 6 deletions(-)
drivers/scsi/ufs/ufshcd.c +4 -2
index bc0d623aed66..c94610cbecae 100644
@@ -348,7 +348,7 @@ static void ufshcd_add_command_trace(struct ufs_hba *hba,
 		unsigned int tag, const char *str)
 {
 	sector_t lba = -1;
-	u8 opcode = 0;
+	u8 opcode = 0, group_id = 0;
 	u32 intr, doorbell;
 	struct ufshcd_lrb *lrbp = &hba->lrb[tag];
 	struct scsi_cmnd *cmd = lrbp->cmd;
@@ -374,13 +374,15 @@ static void ufshcd_add_command_trace(struct ufs_hba *hba,
 				lba = cmd->request->bio->bi_iter.bi_sector;
 			transfer_len = be32_to_cpu(
 				lrbp->ucd_req_ptr->sc.exp_data_transfer_len);
+			if (opcode == WRITE_10)
+				group_id = lrbp->cmd->cmnd[6];
 		}
 	}
 
 	intr = ufshcd_readl(hba, REG_INTERRUPT_STATUS);
 	doorbell = ufshcd_readl(hba, REG_UTP_TRANSFER_REQ_DOOR_BELL);
 	trace_ufshcd_command(dev_name(hba->dev), str, tag,
-				doorbell, transfer_len, intr, lba, opcode);
+			doorbell, transfer_len, intr, lba, opcode, group_id);
 }
 
 static void ufshcd_print_clk_freqs(struct ufs_hba *hba)
include/trace/events/ufs.h +17 -4
index 84841b3a7ffd..50654f352639 100644
@@ -11,6 +11,15 @@
 
 #include <linux/tracepoint.h>
 
+#define str_opcode(opcode)						\
+	__print_symbolic(opcode,					\
+		{ WRITE_16,		"WRITE_16" },			\
+		{ WRITE_10,		"WRITE_10" },			\
+		{ READ_16,		"READ_16" },			\
+		{ READ_10,		"READ_10" },			\
+		{ SYNCHRONIZE_CACHE,	"SYNC" },			\
+		{ UNMAP,		"UNMAP" })
+
 #define UFS_LINK_STATES			\
 	EM(UIC_LINK_OFF_STATE)		\
 	EM(UIC_LINK_ACTIVE_STATE)	\
@@ -215,9 +224,10 @@ DEFINE_EVENT(ufshcd_template, ufshcd_init,
 TRACE_EVENT(ufshcd_command,
 	TP_PROTO(const char *dev_name, const char *str, unsigned int tag,
 			u32 doorbell, int transfer_len, u32 intr, u64 lba,
-			u8 opcode),
+			u8 opcode, u8 group_id),
 
-	TP_ARGS(dev_name, str, tag, doorbell, transfer_len, intr, lba, opcode),
+	TP_ARGS(dev_name, str, tag, doorbell, transfer_len,
+				intr, lba, opcode, group_id),
 
 	TP_STRUCT__entry(
 		__string(dev_name, dev_name)
@@ -228,6 +238,7 @@ TRACE_EVENT(ufshcd_command,
 		__field(u32, intr)
 		__field(u64, lba)
 		__field(u8, opcode)
+		__field(u8, group_id)
 	),
 
 	TP_fast_assign(
@@ -239,13 +250,15 @@ TRACE_EVENT(ufshcd_command,
 		__entry->intr = intr;
 		__entry->lba = lba;
 		__entry->opcode = opcode;
+		__entry->group_id = group_id;
 	),
 
 	TP_printk(
-		"%s: %s: tag: %u, DB: 0x%x, size: %d, IS: %u, LBA: %llu, opcode: 0x%x",
+		"%s: %s: tag: %u, DB: 0x%x, size: %d, IS: %u, LBA: %llu, opcode: 0x%x (%s), group_id: 0x%x",
 		__get_str(str), __get_str(dev_name), __entry->tag,
 		__entry->doorbell, __entry->transfer_len,
-		__entry->intr, __entry->lba, (u32)__entry->opcode
+		__entry->intr, __entry->lba, (u32)__entry->opcode,
+		str_opcode(__entry->opcode), (u32)__entry->group_id
 	)
 );
 
Signature · 1 line
2.29.0.rc1.297.gfa9743e501-goog
#14 lore raw

PATCH v3 5/5 scsi: ufs: fix clkgating on/off correctly

In reply to Jaegeuk Kim

The below call stack prevents clk_gating at every IO completion. We can remove the condition, ufshcd_any_tag_in_use(), since clkgating_work will check it again.

ufshcd_complete_requests(struct ufs_hba *hba)
ufshcd_transfer_req_compl()

    __ufshcd_transfer_req_compl()
      __ufshcd_release(hba)
        if (ufshcd_any_tag_in_use() == 1)
           return;
  ufshcd_tmc_handler(hba);
    blk_mq_tagset_busy_iter();
---
 drivers/scsi/ufs/ufshcd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/scsi/ufs/ufshcd.c +1 -1
index c94610cbecae..38043c6b8d5f 100644
@@ -1746,7 +1746,7 @@ static void __ufshcd_release(struct ufs_hba *hba)
 
 	if (hba->clk_gating.active_reqs || hba->clk_gating.is_suspended ||
 	    hba->ufshcd_state != UFSHCD_STATE_OPERATIONAL ||
-	    ufshcd_any_tag_in_use(hba) || hba->outstanding_tasks ||
+	    hba->outstanding_tasks ||
 	    hba->active_uic_cmd || hba->uic_async_done)
 		return;
 
Signature · 1 line
2.29.0.rc1.297.gfa9743e501-goog
Reviewed-by on v3 5/5
#15 lore raw

Re: [PATCH v3 5/5] scsi: ufs: fix clkgating on/off correctly

Quoted 13 lines · Jaegeuk Kim

The below call stack prevents clk_gating at every IO completion. We can remove the condition, ufshcd_any_tag_in_use(), since clkgating_work will check it again.

ufshcd_complete_requests(struct ufs_hba *hba)
ufshcd_transfer_req_compl()

    __ufshcd_transfer_req_compl()
      __ufshcd_release(hba)
        if (ufshcd_any_tag_in_use() == 1)
           return;
  ufshcd_tmc_handler(hba);
    blk_mq_tagset_busy_iter();
Quoted 2 lines

---

Quoted 15 lines
 drivers/scsi/ufs/ufshcd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/scsi/ufs/ufshcd.c +1 -1
index c94610cbecae..38043c6b8d5f 100644
@@ -1746,7 +1746,7 @@ static void __ufshcd_release(struct ufs_hba *hba)
 
 	if (hba->clk_gating.active_reqs || hba->clk_gating.is_suspended ||
 	    hba->ufshcd_state != UFSHCD_STATE_OPERATIONAL ||
-	    ufshcd_any_tag_in_use(hba) || hba->outstanding_tasks ||
+	    hba->outstanding_tasks ||
 	    hba->active_uic_cmd || hba->uic_async_done)
 		return;