Skip to contentSkip to conversation

phy: tegra: xusb: Fix dangling pointer on probe failure

PATCH Applied Marc Zyngier 3 participants 3 messages Oct 13, 2020 – Oct 29, 2020

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 phy: tegra: xusb: Fix dangling pointer on probe failure

If, for some reason, the xusb PHY fails to probe, it leaves a dangling pointer attached to the platform device structure.

This would normally be harmless, but the Tegra XHCI driver then goes and extract that pointer from the PHY device. Things go downhill from there:

    8.752082] [004d554e5145533c] address between user and kernel address ranges
[    8.752085] Internal error: Oops: 96000004 [#1] PREEMPT SMP
[    8.752088] Modules linked in: max77620_regulator(E+) xhci_tegra(E+) sdhci_tegra(E+) xhci_hcd(E) sdhci_pltfm(E) cqhci(E) fixed(E) usbcore(E) scsi_mod(E) sdhci(E) host1x(E+)
[    8.752103] CPU: 4 PID: 158 Comm: systemd-udevd Tainted: G S      W   E     5.9.0-rc7-00298-gf6337624c4fe #1980
[    8.752105] Hardware name: NVIDIA Jetson TX2 Developer Kit (DT)
[    8.752108] pstate: 20000005 (nzCv daif -PAN -UAO BTYPE=--)
[    8.752115] pc : kobject_put+0x1c/0x21c
[    8.752120] lr : put_device+0x20/0x30
[    8.752121] sp : ffffffc012eb3840
[    8.752122] x29: ffffffc012eb3840 x28: ffffffc010e82638
[    8.752125] x27: ffffffc008d56440 x26: 0000000000000000
[    8.752128] x25: ffffff81eb508200 x24: 0000000000000000
[    8.752130] x23: ffffff81eb538800 x22: 0000000000000000
[    8.752132] x21: 00000000fffffdfb x20: ffffff81eb538810
[    8.752134] x19: 3d4d554e51455300 x18: 0000000000000020
[    8.752136] x17: ffffffc008d00270 x16: ffffffc008d00c94
[    8.752138] x15: 0000000000000004 x14: ffffff81ebd4ae90
[    8.752140] x13: 0000000000000000 x12: ffffff81eb86a4e8
[    8.752142] x11: ffffff81eb86a480 x10: ffffff81eb862fea
[    8.752144] x9 : ffffffc01055fb28 x8 : ffffff81eb86a4a8
[    8.752146] x7 : 0000000000000001 x6 : 0000000000000001
[    8.752148] x5 : ffffff81dff8bc38 x4 : 0000000000000000
[    8.752150] x3 : 0000000000000001 x2 : 0000000000000001
[    8.752152] x1 : 0000000000000002 x0 : 3d4d554e51455300
[    8.752155] Call trace:
[    8.752157]  kobject_put+0x1c/0x21c
[    8.752160]  put_device+0x20/0x30
[    8.752164]  tegra_xusb_padctl_put+0x24/0x3c
[    8.752170]  tegra_xusb_probe+0x8b0/0xd10 [xhci_tegra]
[    8.752174]  platform_drv_probe+0x60/0xb4
[    8.752176]  really_probe+0xf0/0x504
[    8.752179]  driver_probe_device+0x100/0x170
[    8.752181]  device_driver_attach+0xcc/0xd4
[    8.752183]  __driver_attach+0xb0/0x17c
[    8.752185]  bus_for_each_dev+0x7c/0xd4
[    8.752187]  driver_attach+0x30/0x3c
[    8.752189]  bus_add_driver+0x154/0x250
[    8.752191]  driver_register+0x84/0x140
[    8.752193]  __platform_driver_register+0x54/0x60
[    8.752197]  tegra_xusb_init+0x40/0x1000 [xhci_tegra]
[    8.752201]  do_one_initcall+0x54/0x2d0
[    8.752205]  do_init_module+0x68/0x29c
[    8.752207]  load_module+0x2178/0x26c0
[    8.752209]  __do_sys_finit_module+0xb0/0x120
[    8.752211]  __arm64_sys_finit_module+0x2c/0x40
[    8.752215]  el0_svc_common.constprop.0+0x80/0x240
[    8.752218]  do_el0_svc+0x30/0xa0
[    8.752220]  el0_svc+0x18/0x50
[    8.752223]  el0_sync_handler+0x90/0x318
[    8.752225]  el0_sync+0x158/0x180
[    8.752230] Code: a9bd7bfd 910003fd a90153f3 aa0003f3 (3940f000)
[    8.752232] ---[ end trace 90f6c89d62d85ff5 ]---

Reset the pointer on probe failure fixes the issue.

Fixes 53d2a715c2403 ("phy: Add Tegra XUSB pad controller support")
---
 drivers/phy/tegra/xusb.c | 1 +
 1 file changed, 1 insertion(+)
drivers/phy/tegra/xusb.c +1 -0
index de4a46fe1763..ad88d74c1884 100644
@@ -1242,6 +1242,7 @@ static int tegra_xusb_padctl_probe(struct platform_device *pdev)
 reset:
 	reset_control_assert(padctl->rst);
 remove:
+	platform_set_drvdata(pdev, NULL);
 	soc->ops->remove(padctl);
 	return err;
 }
Signature · 1 line
2.28.0
#1 lore raw
Quoted 73 lines · Marc Zyngier

If, for some reason, the xusb PHY fails to probe, it leaves a dangling pointer attached to the platform device structure.

This would normally be harmless, but the Tegra XHCI driver then goes and extract that pointer from the PHY device. Things go downhill from there:

    8.752082] [004d554e5145533c] address between user and kernel address ranges
[    8.752085] Internal error: Oops: 96000004 [#1] PREEMPT SMP
[    8.752088] Modules linked in: max77620_regulator(E+) xhci_tegra(E+) sdhci_tegra(E+) xhci_hcd(E) sdhci_pltfm(E) cqhci(E) fixed(E) usbcore(E) scsi_mod(E) sdhci(E) host1x(E+)
[    8.752103] CPU: 4 PID: 158 Comm: systemd-udevd Tainted: G S      W   E     5.9.0-rc7-00298-gf6337624c4fe #1980
[    8.752105] Hardware name: NVIDIA Jetson TX2 Developer Kit (DT)
[    8.752108] pstate: 20000005 (nzCv daif -PAN -UAO BTYPE=--)
[    8.752115] pc : kobject_put+0x1c/0x21c
[    8.752120] lr : put_device+0x20/0x30
[    8.752121] sp : ffffffc012eb3840
[    8.752122] x29: ffffffc012eb3840 x28: ffffffc010e82638
[    8.752125] x27: ffffffc008d56440 x26: 0000000000000000
[    8.752128] x25: ffffff81eb508200 x24: 0000000000000000
[    8.752130] x23: ffffff81eb538800 x22: 0000000000000000
[    8.752132] x21: 00000000fffffdfb x20: ffffff81eb538810
[    8.752134] x19: 3d4d554e51455300 x18: 0000000000000020
[    8.752136] x17: ffffffc008d00270 x16: ffffffc008d00c94
[    8.752138] x15: 0000000000000004 x14: ffffff81ebd4ae90
[    8.752140] x13: 0000000000000000 x12: ffffff81eb86a4e8
[    8.752142] x11: ffffff81eb86a480 x10: ffffff81eb862fea
[    8.752144] x9 : ffffffc01055fb28 x8 : ffffff81eb86a4a8
[    8.752146] x7 : 0000000000000001 x6 : 0000000000000001
[    8.752148] x5 : ffffff81dff8bc38 x4 : 0000000000000000
[    8.752150] x3 : 0000000000000001 x2 : 0000000000000001
[    8.752152] x1 : 0000000000000002 x0 : 3d4d554e51455300
[    8.752155] Call trace:
[    8.752157]  kobject_put+0x1c/0x21c
[    8.752160]  put_device+0x20/0x30
[    8.752164]  tegra_xusb_padctl_put+0x24/0x3c
[    8.752170]  tegra_xusb_probe+0x8b0/0xd10 [xhci_tegra]
[    8.752174]  platform_drv_probe+0x60/0xb4
[    8.752176]  really_probe+0xf0/0x504
[    8.752179]  driver_probe_device+0x100/0x170
[    8.752181]  device_driver_attach+0xcc/0xd4
[    8.752183]  __driver_attach+0xb0/0x17c
[    8.752185]  bus_for_each_dev+0x7c/0xd4
[    8.752187]  driver_attach+0x30/0x3c
[    8.752189]  bus_add_driver+0x154/0x250
[    8.752191]  driver_register+0x84/0x140
[    8.752193]  __platform_driver_register+0x54/0x60
[    8.752197]  tegra_xusb_init+0x40/0x1000 [xhci_tegra]
[    8.752201]  do_one_initcall+0x54/0x2d0
[    8.752205]  do_init_module+0x68/0x29c
[    8.752207]  load_module+0x2178/0x26c0
[    8.752209]  __do_sys_finit_module+0xb0/0x120
[    8.752211]  __arm64_sys_finit_module+0x2c/0x40
[    8.752215]  el0_svc_common.constprop.0+0x80/0x240
[    8.752218]  do_el0_svc+0x30/0xa0
[    8.752220]  el0_svc+0x18/0x50
[    8.752223]  el0_sync_handler+0x90/0x318
[    8.752225]  el0_sync+0x158/0x180
[    8.752230] Code: a9bd7bfd 910003fd a90153f3 aa0003f3 (3940f000)
[    8.752232] ---[ end trace 90f6c89d62d85ff5 ]---

Reset the pointer on probe failure fixes the issue.

Fixes 53d2a715c2403 ("phy: Add Tegra XUSB pad controller support")
---
 drivers/phy/tegra/xusb.c | 1 +
 1 file changed, 1 insertion(+)
drivers/phy/tegra/xusb.c +0 -0
index de4a46fe1763..ad88d74c1884 100644

drivers/phy/tegra/xusb.c static int tegra_xusb_padctl_probe(struct platform_device *pdev) · line 1248

Quoted 7 lines
drivers/phy/tegra/xusb.c +1 -0
@@ -1242,6 +1242,7 @@ static int tegra_xusb_padctl_probe(struct platform_device *pdev)
 reset:
 	reset_control_assert(padctl->rst);
 remove:
+	platform_set_drvdata(pdev, NULL);
 	soc->ops->remove(padctl);
 	return err;
 }

Sorry, I had missed this before. Why is this necessary? The driver core already does dev_set_drvdata(dev, NULL) on failure, which is the same as your platform_set_drvdata() here.

I suppose one possible explanation would be if for some reason we end up here in the error cleanup path but with err == 0.

Do you have more information on when this happens so that I can repro and investigate? Alternatively, if you've still got this set up, can you do a quick test to see if "err" is indeed a negative error code when we get here?

Thierry

maintainer Applied
#2 lore raw
In reply to Marc Zyngier
Quoted 6 lines · Marc Zyngier

If, for some reason, the xusb PHY fails to probe, it leaves a dangling pointer attached to the platform device structure.

This would normally be harmless, but the Tegra XHCI driver then goes and extract that pointer from the PHY device. Things go downhill from there:

Applied, thanks

Signature · 1 line
~Vinod