ARM: dts: stm32: Fix uSD card-detect GPIO on DHCOM
Subsystems (3)
PATCH 1/1 ARM: dts: stm32: Fix uSD card-detect GPIO on DHCOM
The uSD slot card-detect GPIO is connected to PG1, fix it.
--- arch/arm/dts/stm32mp15xx-dhcom.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/dts/stm32mp15xx-dhcom.dtsi +1 -1
@@ -329,7 +329,7 @@ pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_a>; pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_dir_pins_a>; pinctrl-2 = <&sdmmc1_b4_sleep_pins_a &sdmmc1_dir_sleep_pins_a>; - cd-gpios = <&gpioi 8 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; + cd-gpios = <&gpiog 1 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; disable-wp; st,sig-dir; st,neg-edge;
Signature · 1 line
2.28.0
PATCH 1/1 ARM: dts: stm32: Fix uSD card-detect GPIO on DHCOM
Hi Marek
Quoted 14 lines · Marek Vasut
The uSD slot card-detect GPIO is connected to PG1, fix it.
Signed-off-by Marek Vasut <[email protected]>Cc Patrice Chotard <[email protected]>Cc Patrick Delaunay <[email protected]>--- arch/arm/dts/stm32mp15xx-dhcom.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)arch/arm/dts/stm32mp15xx-dhcom.dtsi +0
-0
arch/arm/dts/stm32mp15xx-dhcom.dtsi line 335
Quoted 8 lines
arch/arm/dts/stm32mp15xx-dhcom.dtsi +1
-1@@ -329,7 +329,7 @@ pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_a>; pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_dir_pins_a>; pinctrl-2 = <&sdmmc1_b4_sleep_pins_a &sdmmc1_dir_sleep_pins_a>; - cd-gpios = <&gpioi 8 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; + cd-gpios = <&gpiog 1 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; disable-wp; st,sig-dir; st,neg-edge;
Thanks
PATCH 1/1 ARM: dts: stm32: Fix uSD card-detect GPIO on DHCOM
In reply to Marek VasutHi Marek,
Quoted 32 lines
From: Marek Vasut <[email protected]>
Sent: mercredi 28 octobre 2020 21:38
To: u-boot at lists.denx.de
Cc: Marek Vasut <[email protected]>; Patrice CHOTARD <[email protected]>; Patrick DELAUNAY <[email protected]>
Subject: [PATCH] ARM: dts: stm32: Fix uSD card-detect GPIO on DHCOM
Importance: HighThe uSD slot card-detect GPIO is connected to PG1, fix it.
Signed-off-by Marek Vasut <[email protected]>Cc Patrice Chotard <[email protected]>Cc Patrick Delaunay <[email protected]>--- arch/arm/dts/stm32mp15xx-dhcom.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)arch/arm/dts/stm32mp15xx- renamed from arch/arm/dts/stm32mp15xx-dhcom.dtsi +0
-0
dhcom.dtsi
index18c08c9435..1081d0c069100644arch/arm/dts/stm32mp15xx-dhcom.dtsi +1
-2@@ -329,7 +329,7 @@ pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_a>; pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_dir_pins_a>; pinctrl-2 = <&sdmmc1_b4_sleep_pins_a &sdmmc1_dir_sleep_pins_a>; - cd-gpios = <&gpioi 8 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; + cd-gpios = <&gpiog 1 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; disable-wp; st,sig-dir; st,neg-edge; --
Quoted 1 line
2.28.0
Thanks
Patrick
PATCH 1/1 ARM: dts: stm32: Fix uSD card-detect GPIO on DHCOM
In reply to Marek VasutHi Marek,
Quoted 12 lines
From: Marek Vasut <[email protected]>
Sent: mercredi 28 octobre 2020 21:38The uSD slot card-detect GPIO is connected to PG1, fix it.
Signed-off-by Marek Vasut <[email protected]>Cc Patrice Chotard <[email protected]>Cc Patrick Delaunay <[email protected]>--- arch/arm/dts/stm32mp15xx-dhcom.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
Applied to u-boot-stm/master, thanks!
Regards
Patrick