Skip to contentSkip to conversation

ARM: dts: stm32: Fix LED5 on STM32MP1 DHCOM PDK2

PATCH In review Marek Vasut 2 participants 2 messages Oct 28, 2020 – Nov 9, 2020

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 ARM: dts: stm32: Fix LED5 on STM32MP1 DHCOM PDK2

On the prototype DHCOM, the LED5 was connected to pin PG2 of the STM32MP15xx, however on the production SoM this was changed to pin PC6. Update the connection in the DT.

Fixes 81d5fc719798 ("ARM: dts: stm32: Add GPIO LEDs for STM32MP1 DHCOM PDK2")
Cc Alexandre Torgue <[email protected]>
Cc Maxime Coquelin <[email protected]>
Cc Patrice Chotard <[email protected]>
Cc Patrick Delaunay <[email protected]>

To: [email protected]

---
 arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi +1 -1
index 3c279ca58ce8..283df559433b 100644
@@ -82,7 +82,7 @@ led {
 
 		led-0 {
 			label = "green:led5";
-			gpios = <&gpiog 2 GPIO_ACTIVE_HIGH>;
+			gpios = <&gpioc 6 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
Signature · 7 lines
2.28.0


_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
#1 lore raw

Hi Marek

Quoted 22 lines · Marek Vasut

On the prototype DHCOM, the LED5 was connected to pin PG2 of the STM32MP15xx, however on the production SoM this was changed to pin PC6. Update the connection in the DT.

Fixes 81d5fc719798 ("ARM: dts: stm32: Add GPIO LEDs for STM32MP1 DHCOM PDK2")
Cc Alexandre Torgue <[email protected]>
Cc Maxime Coquelin <[email protected]>
Cc Patrice Chotard <[email protected]>
Cc Patrick Delaunay <[email protected]>

To: [email protected]

---
  arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi | 2 +-
  1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi +0 -0
index 3c279ca58ce8..283df559433b 100644

arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi led { · line 88

Quoted 8 lines
arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi +1 -1
@@ -82,7 +82,7 @@ led {
 
  		led-0 {
  			label = "green:led5";
-			gpios = <&gpiog 2 GPIO_ACTIVE_HIGH>;
+			gpios = <&gpioc 6 GPIO_ACTIVE_HIGH>;
  			default-state = "off";
  		};
 

Applied on stm32-dt-for-v5.10-fixes.

regards
alex

_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel