Skip to contentSkip to conversation

Input: st1232 - add support resolution reading

PATCH Superseded Andrej Valek 3 participants 6 messages Oct 30, 2020 – Nov 20, 2020

Subsystems (2)

v1 of 4 Superseded Latest is v4 →

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 Input: st1232 - add support resolution reading

Hard-coding resolution for st1633 device was wrong. Some of LCDs like YTS700TLBC-02-100C has assembled Sitronix st1633 touchcontroller too. But the resolution is not 320x480 as was hard-coded.
Add new function which reads correct resolution directly from register.

---
 drivers/input/touchscreen/st1232.c | 52 +++++++++++++++++++++---------
 1 file changed, 36 insertions(+), 16 deletions(-)
drivers/input/touchscreen/st1232.c +36 -16
index 63b29c7279e29..ea74c4ca7698b 100644
@@ -26,15 +26,14 @@
 #define ST1232_TS_NAME	"st1232-ts"
 #define ST1633_TS_NAME	"st1633-ts"
 
+#define REG_XY_RESOLUTION	0x04
+#define REG_XY_COORDINATES	0x12
 #define ST_TS_MAX_FINGERS	10
 
 struct st_chip_info {
 	bool	have_z;
-	u16	max_x;
-	u16	max_y;
 	u16	max_area;
 	u16	max_fingers;
-	u8	start_reg;
 };
 
 struct st1232_ts_data {
@@ -48,15 +47,14 @@ struct st1232_ts_data {
 	u8 *read_buf;
 };
 
-static int st1232_ts_read_data(struct st1232_ts_data *ts)
+static int st1232_ts_read_data(struct st1232_ts_data *ts, u8 reg)
 {
 	struct i2c_client *client = ts->client;
-	u8 start_reg = ts->chip_info->start_reg;
 	struct i2c_msg msg[] = {
 		{
 			.addr	= client->addr,
-			.len	= sizeof(start_reg),
-			.buf	= &start_reg,
+			.len	= sizeof(reg),
+			.buf	= &reg,
 		},
 		{
 			.addr	= client->addr,
@@ -74,6 +72,25 @@ static int st1232_ts_read_data(struct st1232_ts_data *ts)
 	return 0;
 }
 
+static int st1232_ts_read_resolution(struct st1232_ts_data *ts, u16 *max_x,
+				     u16 *max_y)
+{
+	u8 *buf;
+	int error;
+
+	/* select resolution register */
+	error = st1232_ts_read_data(ts, REG_XY_RESOLUTION);
+	if (error)
+		return error;
+
+	 buf = ts->read_buf;
+
+	*max_x = ((buf[0] & 0x0070) << 4) | buf[1];
+	*max_y = ((buf[0] & 0x0007) << 8) | buf[2];
+
+	return 0;
+}
+
 static int st1232_ts_parse_and_report(struct st1232_ts_data *ts)
 {
 	struct input_dev *input = ts->input_dev;
@@ -123,7 +140,7 @@ static irqreturn_t st1232_ts_irq_handler(int irq, void *dev_id)
 	int count;
 	int error;
 
-	error = st1232_ts_read_data(ts);
+	error = st1232_ts_read_data(ts, REG_XY_COORDINATES);
 	if (error)
 		goto out;
 
@@ -157,20 +174,14 @@ static void st1232_ts_power_off(void *data)
 
 static const struct st_chip_info st1232_chip_info = {
 	.have_z		= true,
-	.max_x		= 0x31f, /* 800 - 1 */
-	.max_y		= 0x1df, /* 480 -1 */
 	.max_area	= 0xff,
 	.max_fingers	= 2,
-	.start_reg	= 0x12,
 };
 
 static const struct st_chip_info st1633_chip_info = {
 	.have_z		= false,
-	.max_x		= 0x13f, /* 320 - 1 */
-	.max_y		= 0x1df, /* 480 -1 */
 	.max_area	= 0x00,
 	.max_fingers	= 5,
-	.start_reg	= 0x12,
 };
 
 static int st1232_ts_probe(struct i2c_client *client,
@@ -179,6 +190,7 @@ static int st1232_ts_probe(struct i2c_client *client,
 	const struct st_chip_info *match;
 	struct st1232_ts_data *ts;
 	struct input_dev *input_dev;
+	u16 max_x, max_y;
 	int error;
 
 	match = device_get_match_data(&client->dev);
@@ -239,14 +251,22 @@ static int st1232_ts_probe(struct i2c_client *client,
 	input_dev->name = "st1232-touchscreen";
 	input_dev->id.bustype = BUS_I2C;
 
+	/* read resolution from chip */
+	error = st1232_ts_read_resolution(ts, &max_x, &max_y);
+	if (error) {
+		dev_err(&client->dev,
+			"Failed to read resolution: %d\n", error);
+		return error;
+	}
+
 	if (ts->chip_info->have_z)
 		input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, 0,
 				     ts->chip_info->max_area, 0, 0);
 
 	input_set_abs_params(input_dev, ABS_MT_POSITION_X,
-			     0, ts->chip_info->max_x, 0, 0);
+			     0, max_x, 0, 0);
 	input_set_abs_params(input_dev, ABS_MT_POSITION_Y,
-			     0, ts->chip_info->max_y, 0, 0);
+			     0, max_y, 0, 0);
 
 	touchscreen_parse_properties(input_dev, true, &ts->prop);
 
Signature · 1 line
2.20.1
#1 lore raw
Thank you for the patch! Perhaps something to improve:

Hi Andrej,

Thank you for the patch! Perhaps something to improve:

[auto build test WARNING on input/next]
[also build test WARNING on v5.10-rc2 next-20201102]
[If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]

url:    https://github.com/0day-ci/linux/commits/Andrej-Valek/Input-st1232-add-support-resolution-reading/20201030-173555
base:   https://git.kernel.org/pub/scm/linux/kernel/git/dtor/input.git next
config: i386-randconfig-m021-20201102 (attached as .config)
compiler: gcc-9 (Debian 9.3.0-15) 9.3.0

If you fix the issue, kindly add following tag as appropriate

smatch warnings:
drivers/input/touchscreen/st1232.c:86 st1232_ts_read_resolution() warn: inconsistent indenting

vim +86 drivers/input/touchscreen/st1232.c

    74	
    75	static int st1232_ts_read_resolution(struct st1232_ts_data *ts, u16 *max_x,
    76					     u16 *max_y)
    77	{
    78		u8 *buf;
    79		int error;
    80	
    81		/* select resolution register */
    82		error = st1232_ts_read_data(ts, REG_XY_RESOLUTION);
    83		if (error)
    84			return error;
    85	
  > 86		 buf = ts->read_buf;
    87	
    88		*max_x = ((buf[0] & 0x0070) << 4) | buf[1];
    89		*max_y = ((buf[0] & 0x0007) << 8) | buf[2];
    90	
    91		return 0;
    92	}
    93	

---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/[email protected]

#2 lore raw

PATCH v2 1/1 Input: st1232 - add support resolution reading

Hard-coding resolution for st1633 device was wrong. Some of LCDs like YTS700TLBC-02-100C has assembled Sitronix st1633 touchcontroller too. But the resolution is not 320x480 as was hard-coded.
Add new function which reads correct resolution directly from register.

---
 drivers/input/touchscreen/st1232.c | 52 +++++++++++++++++++++---------
 1 file changed, 36 insertions(+), 16 deletions(-)
drivers/input/touchscreen/st1232.c +36 -16
index 63b29c7279e29..1b4b139c85330 100644
@@ -26,15 +26,14 @@
 #define ST1232_TS_NAME	"st1232-ts"
 #define ST1633_TS_NAME	"st1633-ts"
 
+#define REG_XY_RESOLUTION	0x04
+#define REG_XY_COORDINATES	0x12
 #define ST_TS_MAX_FINGERS	10
 
 struct st_chip_info {
 	bool	have_z;
-	u16	max_x;
-	u16	max_y;
 	u16	max_area;
 	u16	max_fingers;
-	u8	start_reg;
 };
 
 struct st1232_ts_data {
@@ -48,15 +47,14 @@ struct st1232_ts_data {
 	u8 *read_buf;
 };
 
-static int st1232_ts_read_data(struct st1232_ts_data *ts)
+static int st1232_ts_read_data(struct st1232_ts_data *ts, u8 reg)
 {
 	struct i2c_client *client = ts->client;
-	u8 start_reg = ts->chip_info->start_reg;
 	struct i2c_msg msg[] = {
 		{
 			.addr	= client->addr,
-			.len	= sizeof(start_reg),
-			.buf	= &start_reg,
+			.len	= sizeof(reg),
+			.buf	= &reg,
 		},
 		{
 			.addr	= client->addr,
@@ -74,6 +72,25 @@ static int st1232_ts_read_data(struct st1232_ts_data *ts)
 	return 0;
 }
 
+static int st1232_ts_read_resolution(struct st1232_ts_data *ts, u16 *max_x,
+				     u16 *max_y)
+{
+	u8 *buf;
+	int error;
+
+	/* select resolution register */
+	error = st1232_ts_read_data(ts, REG_XY_RESOLUTION);
+	if (error)
+		return error;
+
+	buf = ts->read_buf;
+
+	*max_x = ((buf[0] & 0x0070) << 4) | buf[1];
+	*max_y = ((buf[0] & 0x0007) << 8) | buf[2];
+
+	return 0;
+}
+
 static int st1232_ts_parse_and_report(struct st1232_ts_data *ts)
 {
 	struct input_dev *input = ts->input_dev;
@@ -123,7 +140,7 @@ static irqreturn_t st1232_ts_irq_handler(int irq, void *dev_id)
 	int count;
 	int error;
 
-	error = st1232_ts_read_data(ts);
+	error = st1232_ts_read_data(ts, REG_XY_COORDINATES);
 	if (error)
 		goto out;
 
@@ -157,20 +174,14 @@ static void st1232_ts_power_off(void *data)
 
 static const struct st_chip_info st1232_chip_info = {
 	.have_z		= true,
-	.max_x		= 0x31f, /* 800 - 1 */
-	.max_y		= 0x1df, /* 480 -1 */
 	.max_area	= 0xff,
 	.max_fingers	= 2,
-	.start_reg	= 0x12,
 };
 
 static const struct st_chip_info st1633_chip_info = {
 	.have_z		= false,
-	.max_x		= 0x13f, /* 320 - 1 */
-	.max_y		= 0x1df, /* 480 -1 */
 	.max_area	= 0x00,
 	.max_fingers	= 5,
-	.start_reg	= 0x12,
 };
 
 static int st1232_ts_probe(struct i2c_client *client,
@@ -179,6 +190,7 @@ static int st1232_ts_probe(struct i2c_client *client,
 	const struct st_chip_info *match;
 	struct st1232_ts_data *ts;
 	struct input_dev *input_dev;
+	u16 max_x, max_y;
 	int error;
 
 	match = device_get_match_data(&client->dev);
@@ -239,14 +251,22 @@ static int st1232_ts_probe(struct i2c_client *client,
 	input_dev->name = "st1232-touchscreen";
 	input_dev->id.bustype = BUS_I2C;
 
+	/* read resolution from chip */
+	error = st1232_ts_read_resolution(ts, &max_x, &max_y);
+	if (error) {
+		dev_err(&client->dev,
+			"Failed to read resolution: %d\n", error);
+		return error;
+	}
+
 	if (ts->chip_info->have_z)
 		input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, 0,
 				     ts->chip_info->max_area, 0, 0);
 
 	input_set_abs_params(input_dev, ABS_MT_POSITION_X,
-			     0, ts->chip_info->max_x, 0, 0);
+			     0, max_x, 0, 0);
 	input_set_abs_params(input_dev, ABS_MT_POSITION_Y,
-			     0, ts->chip_info->max_y, 0, 0);
+			     0, max_y, 0, 0);
 
 	touchscreen_parse_properties(input_dev, true, &ts->prop);
 
Signature · 1 line
2.20.1
maintainer Applied
#3 lore raw
Quoted 6 lines · Andrej Valek

Hard-coding resolution for st1633 device was wrong. Some of LCDs like YTS700TLBC-02-100C has assembled Sitronix st1633 touchcontroller too. But the resolution is not 320x480 as was hard-coded.
Add new function which reads correct resolution directly from register.

Applied, thank you.

Signature · 1 line
Dmitry
#4 lore raw

Hello Dimitry,

Thank you for that.
What about the other patches?

Regards,
Andrej

Quoted 19 lines

-----Original Message-----
From: Dmitry Torokhov <[email protected]>
Sent: Thursday, November 12, 2020 2:54 AM
To: Valek, Andrej (ADV D EU SK SI-BP1) <[email protected]>
Cc: linux-input(a)vger.kernel.org; linux-kernel(a)vger.kernel.org; kbuild-all(a)lists.01.org
Subject: Re: [PATCH v2] Input: st1232 - add support resolution reading

Quoted 6 lines · Andrej Valek

Hard-coding resolution for st1633 device was wrong. Some of LCDs like YTS700TLBC-02-100C has assembled Sitronix st1633 touchcontroller too. But the resolution is not 320x480 as was hard-coded.
Add new function which reads correct resolution directly from register.

Applied, thank you.

--
Dmitry

#5 lore raw

Hello again Dimitry,

I haven't received any response yet, so I will ask again.

I would like to know, the current status about my other patches for goodix and atmel input. Are there any problems, or what I have to do, to be applied?

Thanks,
Andrej

Quoted 28 lines

Hello Dimitry,

Thank you for that.
What about the other patches?

Regards,
Andrej

Quoted 9 lines

-----Original Message-----
From: Dmitry Torokhov <[email protected]>
Sent: Thursday, November 12, 2020 2:54 AM>
To: Valek, Andrej (ADV D EU SK SI-BP1) <[email protected]>
Cc: linux-input(a)vger.kernel.org; linux-kernel(a)vger.kernel.org; kbuild-all(a)lists.01.org
Subject: Re: [PATCH v2] Input: st1232 - add support resolution reading

On Tue, Nov 03, 2020 at 08:39:49AM +0100, Andrej Valek wrote:

Quoted 9 lines
Quoted 6 lines

Hard-coding resolution for st1633 device was wrong. Some of LCDs like YTS700TLBC-02-100C has assembled Sitronix st1633 touchcontroller too. But the resolution is not 320x480 as was hard-coded.
Add new function which reads correct resolution directly from register.

Applied, thank you.

--

Quoted 1 line

Dmitry