configs: am65/j72x: Set CONFIG_LOGLEVEL to 7
PATCH 1/1 configs: am65/j72x: Set CONFIG_LOGLEVEL to 7
By default CONFIG_LOGLEVEL seems to be set to 4 which is too low and doesn't show dev_info/dev_notice/dev_warn messages on console. This has been deliberately set low globally to be conservative setting across the board due to primary bootloader size limitations. It is best to tune per board config as per user needs.
On K3 we have separate SPL and u-boot configs so we can afford to set u-boot CONFIG_LOGLEVEL to 7.
On AM65 this patch causes u-boot.img size to change from 932KB to 940KB with 1 line additional print during MMC boot. i.e. details of Net subsystem
"Net: K3 CPSW: nuss_ver: 0x6BA00102 cpsw_ver: 0x6BA80102 ale_ver: 0x00293904 Ports:1 mdio_freq:1000000"
Similar 8KB difference was seen on J721E.
--- configs/am65x_evm_a53_defconfig | 1 + configs/am65x_hs_evm_a53_defconfig | 1 + configs/j7200_evm_a72_defconfig | 1 + configs/j721e_evm_a72_defconfig | 1 + configs/j721e_hs_evm_a72_defconfig | 1 + 5 files changed, 5 insertions(+)
configs/am65x_evm_a53_defconfig +1 -0
@@ -30,6 +30,7 @@ CONFIG_SPL_LOAD_FIT_ADDRESS=0x81000000 # CONFIG_USE_SPL_FIT_GENERATOR is not set CONFIG_OF_BOARD_SETUP=y CONFIG_BOOTCOMMAND="run findfdt; run envboot; run init_${boot}; run boot_rprocs; run get_kern_${boot}; run get_fdt_${boot}; run get_overlay_${boot}; run run_kern" +CONFIG_LOGLEVEL=7 CONFIG_CONSOLE_MUX=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y CONFIG_SPL_STACK_R=y
configs/am65x_hs_evm_a53_defconfig +1 -0
@@ -32,6 +32,7 @@ CONFIG_SPL_FIT_IMAGE_POST_PROCESS=y # CONFIG_USE_SPL_FIT_GENERATOR is not set CONFIG_OF_BOARD_SETUP=y CONFIG_BOOTCOMMAND="run findfdt; run envboot; run init_${boot}; run get_fit_${boot}; run get_overlaystring; run run_fit" +CONFIG_LOGLEVEL=7 CONFIG_CONSOLE_MUX=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y CONFIG_SPL_STACK_R=y
configs/j7200_evm_a72_defconfig +1 -0
@@ -31,6 +31,7 @@ CONFIG_SPL_LOAD_FIT_ADDRESS=0x81000000 # CONFIG_USE_SPL_FIT_GENERATOR is not set CONFIG_OF_BOARD_SETUP=y CONFIG_BOOTCOMMAND="run findfdt; run envboot; run init_${boot}; run boot_rprocs; run get_kern_${boot}; run get_fdt_${boot}; run get_overlay_${boot}; run run_kern" +CONFIG_LOGLEVEL=7 CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y CONFIG_SPL_STACK_R=y
configs/j721e_evm_a72_defconfig +1 -0
@@ -30,6 +30,7 @@ CONFIG_SPL_LOAD_FIT=y CONFIG_SPL_LOAD_FIT_ADDRESS=0x81000000 # CONFIG_USE_SPL_FIT_GENERATOR is not set CONFIG_BOOTCOMMAND="run findfdt; run envboot; run init_${boot}; run boot_rprocs; run get_kern_${boot}; run get_fdt_${boot}; run get_overlay_${boot}; run run_kern" +CONFIG_LOGLEVEL=7 CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y CONFIG_SPL_STACK_R=y
configs/j721e_hs_evm_a72_defconfig +1 -0
@@ -31,6 +31,7 @@ CONFIG_SPL_LOAD_FIT_ADDRESS=0x81000000 CONFIG_SPL_FIT_IMAGE_POST_PROCESS=y # CONFIG_USE_SPL_FIT_GENERATOR is not set CONFIG_BOOTCOMMAND="run findfdt; run envboot; run init_${boot}; run boot_rprocs; run get_fit_${boot}; run get_overlaystring; run run_fit" +CONFIG_LOGLEVEL=7 CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y CONFIG_SPL_STACK_R=y
Signature · 2 lines
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
PATCH 1/1 configs: am65/j72x: Set CONFIG_LOGLEVEL to 7
Quoted 14 lines · Roger Quadros
By default
CONFIG_LOGLEVELseems to be set to 4 which is too low and doesn't show dev_info/dev_notice/dev_warn messages on console. This has been deliberately set low globally to be conservative setting across the board due to primary bootloader size limitations. It is best to tune per board config as per user needs.On K3 we have separate SPL and u-boot configs so we can afford to set u-boot
CONFIG_LOGLEVELto 7.On AM65 this patch causes u-boot.img size to change from 932KB to 940KB with 1 line additional print during MMC boot. i.e. details of Net subsystem
Quoted 6 lines
"Net: K3 CPSW:
nuss_ver:0x6BA00102cpsw_ver:0x6BA80102ale_ver:0x00293904Ports:1 mdio_freq:1000000"Similar 8KB difference was seen on J721E.
Signed-off-by Roger Quadros <[email protected]>Reviewed-by Nishanth Menon <[email protected]>
Applied to u-boot-ti for-next branch.
Thanks and regards,
Lokesh