Skip to contentSkip to conversation

video/fbdev/core: Mark debug-only variable as __maybe_unused

PATCH In review Thomas Zimmermann 4 participants 6 messages Oct 21, 2020 – Nov 1, 2020

Subsystems (3)
lore
Share & tools
lore

Thomas Zimmermann

author maintainer
#0 lore raw

PATCH 1/1 video/fbdev/core: Mark debug-only variable as __maybe_unused

Compiling fbcon.c gives

../drivers/video/fbdev/core/fbcon.c: In function 'fbcon_exit':
../drivers/video/fbdev/core/fbcon.c:3358:7: warning: variable 'pending' set but not used [-Wunused-but-set-variable]

 3358 |   int pending = 0;
      |       ^~~~~~~

The variable pending is only used for fbcon debugging. It's unused otherwise. Mark it accordingly.

---
 drivers/video/fbdev/core/fbcon.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/video/fbdev/core/fbcon.c +1 -1
index d03f62369734..aca1512b6e86 100644
@@ -3355,7 +3355,7 @@ static void fbcon_exit(void)
 #endif
 
 	for_each_registered_fb(i) {
-		int pending = 0;
+		int __maybe_unused pending = 0;
 
 		mapped = 0;
 		info = registered_fb[i];
Signature · 1 line
2.28.0
#1 lore raw

Hi Thomas.

Quoted 11 lines · Thomas Zimmermann

Compiling fbcon.c gives

../drivers/video/fbdev/core/fbcon.c: In function 'fbcon_exit':
../drivers/video/fbdev/core/fbcon.c:3358:7: warning: variable 'pending' set but not used [-Wunused-but-set-variable]

 3358 |   int pending = 0;
      |       ^~~~~~~

The variable pending is only used for fbcon debugging. It's unused otherwise. Mark it accordingly.

A better fix would be to replace the few uses of DPRINTK() with pr_dbg(). pr_info() is alread in use.

ofc, the next step would be to replace all prink() with their pr_ counterparts.

Peilin, maybe this is one for your nice cleanups in fbcon?

Sam

#2 lore raw

Hi Sam,

Quoted 15 lines · Sam Ravnborg

Hi Thomas.

Quoted 11 lines · Thomas Zimmermann

Compiling fbcon.c gives

../drivers/video/fbdev/core/fbcon.c: In function 'fbcon_exit':
../drivers/video/fbdev/core/fbcon.c:3358:7: warning: variable 'pending' set but not used [-Wunused-but-set-variable]

 3358 |   int pending = 0;
      |       ^~~~~~~

The variable pending is only used for fbcon debugging. It's unused otherwise. Mark it accordingly.

Quoted 7 lines

A better fix would be to replace the few uses of DPRINTK() with pr_dbg(). pr_info() is alread in use.

ofc, the next step would be to replace all prink() with their pr_ counterparts.

Peilin, maybe this is one for your nice cleanups in fbcon?

Sure, I will send a patch replacing all printk() except DPRINTK(). Thank you for the suggestion!

Peilin

#3 lore raw

PATCH 1/1 fbcon: Replace printk() with pr_*()

In reply to Sam Ravnborg

Replace printk() with pr_err(), pr_warn() and pr_info(). Do not split long strings, for easier grepping. Use __func__ whenever applicable.

fbcon_prepare_logo() has more than one callers, use "fbcon_prepare_logo:" instead of "fbcon_init:", for less confusion.

---
 drivers/video/fbdev/core/fbcon.c | 42 +++++++++++++-------------------
 1 file changed, 17 insertions(+), 25 deletions(-)
drivers/video/fbdev/core/fbcon.c +17 -25
index cef437817b0d..a3e87ab0e523 100644
@@ -659,8 +659,7 @@ static void fbcon_prepare_logo(struct vc_data *vc, struct fb_info *info,
 
 	if (logo_lines > vc->vc_bottom) {
 		logo_shown = FBCON_LOGO_CANSHOW;
-		printk(KERN_INFO
-		       "fbcon_init: disable boot-logo (boot-logo bigger than screen).\n");
+		pr_info("%s: disable boot-logo (boot-logo bigger than screen).\n", __func__);
 	} else {
 		logo_shown = FBCON_LOGO_DRAW;
 		vc->vc_top = logo_lines;
@@ -785,9 +784,8 @@ static int con2fb_release_oldinfo(struct vc_data *vc, struct fb_info *oldinfo,
 			ret = newinfo->fbops->fb_set_par(newinfo);
 
 			if (ret)
-				printk(KERN_ERR "con2fb_release_oldinfo: "
-					"detected unhandled fb_set_par error, "
-					"error code %d\n", ret);
+				pr_err("%s: detected unhandled fb_set_par error, error code %d\n",
+				       __func__, ret);
 		}
 	}
 
@@ -806,9 +804,8 @@ static void con2fb_init_display(struct vc_data *vc, struct fb_info *info,
 		ret = info->fbops->fb_set_par(info);
 
 		if (ret)
-			printk(KERN_ERR "con2fb_init_display: detected "
-				"unhandled fb_set_par error, "
-				"error code %d\n", ret);
+			pr_err("%s: detected unhandled fb_set_par error, error code %d\n",
+			       __func__, ret);
 	}
 
 	ops->flags |= FBCON_FLAGS_INIT;
@@ -1137,9 +1134,8 @@ static void fbcon_init(struct vc_data *vc, int init)
 			ret = info->fbops->fb_set_par(info);
 
 			if (ret)
-				printk(KERN_ERR "fbcon_init: detected "
-					"unhandled fb_set_par error, "
-					"error code %d\n", ret);
+				pr_err("%s: detected unhandled fb_set_par error, error code %d\n",
+				       __func__, ret);
 		}
 
 		ops->flags |= FBCON_FLAGS_INIT;
@@ -2126,9 +2122,8 @@ static int fbcon_switch(struct vc_data *vc)
 			ret = info->fbops->fb_set_par(info);
 
 			if (ret)
-				printk(KERN_ERR "fbcon_switch: detected "
-					"unhandled fb_set_par error, "
-					"error code %d\n", ret);
+				pr_err("%s: detected unhandled fb_set_par error, error code %d\n",
+				       __func__, ret);
 		}
 
 		if (old_info != info)
@@ -2899,9 +2894,8 @@ void fbcon_remap_all(struct fb_info *info)
 		set_con2fb_map(i, idx, 0);
 
 	if (con_is_bound(&fb_con)) {
-		printk(KERN_INFO "fbcon: Remapping primary device, "
-		       "fb%i, to tty %i-%i\n", idx,
-		       first_fb_vc + 1, last_fb_vc + 1);
+		pr_info("fbcon: Remapping primary device, fb%i, to tty %i-%i\n",
+			idx, first_fb_vc + 1, last_fb_vc + 1);
 		info_idx = idx;
 	}
 	console_unlock();
@@ -2914,17 +2908,16 @@ static void fbcon_select_primary(struct fb_info *info)
 	    fb_is_primary_device(info)) {
 		int i;
 
-		printk(KERN_INFO "fbcon: %s (fb%i) is primary device\n",
-		       info->fix.id, info->node);
+		pr_info("fbcon: %s (fb%i) is primary device\n",
+			info->fix.id, info->node);
 		primary_device = info->node;
 
 		for (i = first_fb_vc; i <= last_fb_vc; i++)
 			con2fb_map_boot[i] = primary_device;
 
 		if (con_is_bound(&fb_con)) {
-			printk(KERN_INFO "fbcon: Remapping primary device, "
-			       "fb%i, to tty %i-%i\n", info->node,
-			       first_fb_vc + 1, last_fb_vc + 1);
+			pr_info("fbcon: Remapping primary device, fb%i, to tty %i-%i\n",
+				info->node, first_fb_vc + 1, last_fb_vc + 1);
 			info_idx = primary_device;
 		}
 	}
@@ -3394,9 +3387,8 @@ void __init fb_console_init(void)
 				     "fbcon");
 
 	if (IS_ERR(fbcon_device)) {
-		printk(KERN_WARNING "Unable to create device "
-		       "for fbcon; errno = %ld\n",
-		       PTR_ERR(fbcon_device));
+		pr_warn("Unable to create device for fbcon; errno = %ld\n",
+			PTR_ERR(fbcon_device));
 		fbcon_device = NULL;
 	} else
 		fbcon_init_device();
Signature · 1 line
2.25.1
#4 lore raw

Re: [PATCH] fbcon: Replace printk() with pr_*()

Quoted 17 lines · Peilin Ye

Replace printk() with pr_err(), pr_warn() and pr_info(). Do not split long strings, for easier grepping. Use __func__ whenever applicable.

fbcon_prepare_logo() has more than one callers, use "fbcon_prepare_logo:" instead of "fbcon_init:", for less confusion.

---
 drivers/video/fbdev/core/fbcon.c | 42 +++++++++++++-------------------
 1 file changed, 17 insertions(+), 25 deletions(-)
drivers/video/fbdev/core/fbcon.c +0 -0
index cef437817b0d..a3e87ab0e523 100644

drivers/video/fbdev/core/fbcon.c static void fbcon_prepare_logo(struct vc_data *vc, struct fb_info *info, · line 662

Quoted 6 lines
drivers/video/fbdev/core/fbcon.c +1 -2
@@ -659,8 +659,7 @@ static void fbcon_prepare_logo(struct vc_data *vc, struct fb_info *info,
 
 	if (logo_lines > vc->vc_bottom) {
 		logo_shown = FBCON_LOGO_CANSHOW;
-		printk(KERN_INFO
-		       "fbcon_init: disable boot-logo (boot-logo bigger than screen).\n");
+		pr_info("%s: disable boot-logo (boot-logo bigger than screen).\n", __func__);

Shouldn't this be:

		dev_info(info->dev, "...");

instead?

It's a driver, and you have access to the struct device that is being worked on, so always try to use the dev_* versions of these calls instead when ever possible.

thanks,

greg k-h
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel

#5 lore raw

Re: [PATCH] fbcon: Replace printk() with pr_*()

Quoted 26 lines · Greg Kroah-Hartman
Quoted 17 lines · Peilin Ye

Replace printk() with pr_err(), pr_warn() and pr_info(). Do not split long strings, for easier grepping. Use __func__ whenever applicable.

fbcon_prepare_logo() has more than one callers, use "fbcon_prepare_logo:" instead of "fbcon_init:", for less confusion.

---
 drivers/video/fbdev/core/fbcon.c | 42 +++++++++++++-------------------
 1 file changed, 17 insertions(+), 25 deletions(-)
drivers/video/fbdev/core/fbcon.c +0 -0
index cef437817b0d..a3e87ab0e523 100644

drivers/video/fbdev/core/fbcon.c static void fbcon_prepare_logo(struct vc_data *vc, struct fb_info *info, · line 662

Quoted 6 lines
drivers/video/fbdev/core/fbcon.c +1 -2
@@ -659,8 +659,7 @@ static void fbcon_prepare_logo(struct vc_data *vc, struct fb_info *info,
 
 	if (logo_lines > vc->vc_bottom) {
 		logo_shown = FBCON_LOGO_CANSHOW;
-		printk(KERN_INFO
-		       "fbcon_init: disable boot-logo (boot-logo bigger than screen).\n");
+		pr_info("%s: disable boot-logo (boot-logo bigger than screen).\n", __func__);

Shouldn't this be:

Quoted 6 lines
		dev_info(info->dev, "...");

instead?

It's a driver, and you have access to the struct device that is being worked on, so always try to use the dev_* versions of these calls instead when ever possible.

Ah, I see. I'll fix them in v2, thank you!

Peilin