Skip to contentSkip to conversation

Rid W=1 warnings in SCSI

PATCH RESEND In review Lee Jones 3 participants 26 messages Nov 2, 2020 – Nov 17, 2020

Subsystems (8)
lore
Share & tools
lore

Lee Jones

author
#0 lore raw

cover Rid W=1 warnings in SCSI

[Resending to include the SCSI ML as per Martin's request]

This set is part of a larger effort attempting to clean-up W=1 kernel builds, which are currently overwhelmingly riddled with niggly little warnings.

Lee Jones (19):
scsi: aic7xxx: aic79xx_osm: Remove unused variable 'saved_scsiid'
scsi: mpt3sas: mpt3sas_scsih: Fix function documentation formatting
scsi: lpfc: lpfc_scsi: Fix a whole host of kernel-doc issues
scsi: lpfc: lpfc_attr: Demote kernel-doc format for redefined
functions
scsi: lpfc: lpfc_attr: Fix-up a bunch of kernel-doc misdemeanours
scsi: lpfc: lpfc_debugfs: Fix a couple of function documentation
issues
scsi: lpfc: lpfc_bsg: Provide correct documentation for a bunch of
functions
scsi: esas2r: esas2r_disc: Place brackets around a potentially empty

    if()
  scsi: esas2r: esas2r_init: Place brackets around a potentially empty
    if()

scsi: lpfc: lpfc_nvme: Remove unused variable 'phba'
scsi: ufs: ufshcd: Fix some function doc-rot
scsi: lpfc: lpfc_nvme: Fix some kernel-doc related issues
scsi: esas2r: esas2r_int: Add brackets around potentially empty if()s
scsi: lpfc: lpfc_nvmet: Fix-up some formatting and doc-rot issues
scsi: esas2r: esas2r_main: Demote non-conformant kernel-doc header
scsi: advansys: Relocate or remove unused variables
scsi: dc395x: Remove a few unused variables
scsi: dc395x: Mark 's_stat2' as __maybe_unused
scsi: hpsa: Strip out a bunch of set but unused variables

 drivers/scsi/advansys.c              | 16 ++------
 drivers/scsi/aic7xxx/aic79xx_osm.c   |  3 +-
 drivers/scsi/dc395x.c                | 15 +++-----
 drivers/scsi/esas2r/esas2r_disc.c    |  3 +-
 drivers/scsi/esas2r/esas2r_init.c    |  5 ++-
 drivers/scsi/esas2r/esas2r_int.c     |  8 ++--
 drivers/scsi/esas2r/esas2r_main.c    |  8 +---
 drivers/scsi/hpsa.c                  | 25 ++++---------
 drivers/scsi/lpfc/lpfc_attr.c        | 56 +++++++++++++++++-----------
 drivers/scsi/lpfc/lpfc_bsg.c         | 34 ++++++++---------
 drivers/scsi/lpfc/lpfc_debugfs.c     |  3 +-
 drivers/scsi/lpfc/lpfc_nvme.c        | 37 ++++++++----------
 drivers/scsi/lpfc/lpfc_nvmet.c       | 17 ++++-----
 drivers/scsi/lpfc/lpfc_scsi.c        | 48 +++++++++++++++---------
 drivers/scsi/mpt3sas/mpt3sas_scsih.c |  8 ++--
 drivers/scsi/ufs/ufshcd.c            |  3 +-
 16 files changed, 141 insertions(+), 148 deletions(-)
Signature · 1 line
2.25.1
author
#1 lore raw

PATCH RESEND 1/19 scsi: aic7xxx: aic79xx_osm: Remove unused variable 'saved_scsiid'

Fixes the following W=1 kernel build warning(s):

drivers/scsi/aic7xxx/aic79xx_osm.c: In function ‘ahd_linux_queue_abort_cmd’:
drivers/scsi/aic7xxx/aic79xx_osm.c:2143:9: warning: variable ‘saved_scsiid’ set but not used [-Wunused-but-set-variable]

Cc Hannes Reinecke <[email protected]>
---
 drivers/scsi/aic7xxx/aic79xx_osm.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
drivers/scsi/aic7xxx/aic79xx_osm.c +1 -2
index f32398939f74b..d413b1c5fdc54 100644
@@ -2140,7 +2140,6 @@ ahd_linux_queue_abort_cmd(struct scsi_cmnd *cmd)
 	u_int  saved_scbptr;
 	u_int  active_scbptr;
 	u_int  last_phase;
-	u_int  saved_scsiid;
 	u_int  cdb_byte;
 	int    retval = SUCCESS;
 	int    was_paused;
@@ -2254,7 +2253,7 @@ ahd_linux_queue_abort_cmd(struct scsi_cmnd *cmd)
 	 * passed in command.  That command is currently active on the
 	 * bus or is in the disconnected state.
 	 */
-	saved_scsiid = ahd_inb(ahd, SAVED_SCSIID);
+	ahd_inb(ahd, SAVED_SCSIID);
 	if (last_phase != P_BUSFREE
 	    && SCB_GET_TAG(pending_scb) == active_scbptr) {
 
Signature · 1 line
2.25.1
author
#2 lore raw

PATCH RESEND 2/19 scsi: mpt3sas: mpt3sas_scsih: Fix function documentation formatting

In reply to Lee Jones

Fixes the following W=1 kernel build warning(s):

drivers/scsi/mpt3sas/mpt3sas_scsih.c:2778: warning: Function parameter or member 'ioc' not described in 'scsih_tm_cmd_map_status' drivers/scsi/mpt3sas/mpt3sas_scsih.c:2778: warning: Function parameter or member 'channel' not described in 'scsih_tm_cmd_map_status' drivers/scsi/mpt3sas/mpt3sas_scsih.c:2829: warning: Function parameter or member 'ioc' not described in 'scsih_tm_post_processing' drivers/scsi/mpt3sas/mpt3sas_scsih.c:2829: warning: Function parameter or member 'channel' not described in 'scsih_tm_post_processing'

Cc Sathya Prakash <[email protected]>
Cc Sreekanth Reddy <[email protected]>
Cc Suganath Prabu Subramani <[email protected]>
---
 drivers/scsi/mpt3sas/mpt3sas_scsih.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/scsi/mpt3sas/mpt3sas_scsih.c +4 -4
index 5f845d7094fcc..f01983dc73703 100644
@@ -2762,8 +2762,8 @@ mpt3sas_scsih_clear_tm_flag(struct MPT3SAS_ADAPTER *ioc, u16 handle)
 
 /**
  * scsih_tm_cmd_map_status - map the target reset & LUN reset TM status
- * @ioc - per adapter object
- * @channel - the channel assigned by the OS
+ * @ioc: per adapter object
+ * @channel: the channel assigned by the OS
  * @id: the id assigned by the OS
  * @lun: lun number
  * @type: MPI2_SCSITASKMGMT_TASKTYPE__XXX (defined in mpi2_init.h)
@@ -2808,9 +2808,9 @@ scsih_tm_cmd_map_status(struct MPT3SAS_ADAPTER *ioc, uint channel,
 
 /**
  * scsih_tm_post_processing - post processing of target & LUN reset
- * @ioc - per adapter object
+ * @ioc: per adapter object
  * @handle: device handle
- * @channel - the channel assigned by the OS
+ * @channel: the channel assigned by the OS
  * @id: the id assigned by the OS
  * @lun: lun number
  * @type: MPI2_SCSITASKMGMT_TASKTYPE__XXX (defined in mpi2_init.h)
Signature · 1 line
2.25.1
author
#3 lore raw

PATCH RESEND 3/19 scsi: lpfc: lpfc_scsi: Fix a whole host of kernel-doc issues

In reply to Lee Jones

Fixes the following W=1 kernel build warning(s):

drivers/scsi/lpfc/lpfc_scsi.c:331: warning: Function parameter or member 'num_to_alloc' not described in 'lpfc_new_scsi_buf_s3' drivers/scsi/lpfc/lpfc_scsi.c:331: warning: Excess function parameter 'num_to_allocate' description in 'lpfc_new_scsi_buf_s3' drivers/scsi/lpfc/lpfc_scsi.c:507: warning: Function parameter or member 'idx' not described in 'lpfc_sli4_io_xri_aborted' drivers/scsi/lpfc/lpfc_scsi.c:593: warning: Function parameter or member 'ndlp' not described in 'lpfc_get_scsi_buf_s3' drivers/scsi/lpfc/lpfc_scsi.c:593: warning: Function parameter or member 'cmnd' not described in 'lpfc_get_scsi_buf_s3' drivers/scsi/lpfc/lpfc_scsi.c:632: warning: Function parameter or member 'ndlp' not described in 'lpfc_get_scsi_buf_s4' drivers/scsi/lpfc/lpfc_scsi.c:632: warning: Function parameter or member 'cmnd' not described in 'lpfc_get_scsi_buf_s4' drivers/scsi/lpfc/lpfc_scsi.c:744: warning: Function parameter or member 'ndlp' not described in 'lpfc_get_scsi_buf' drivers/scsi/lpfc/lpfc_scsi.c:744: warning: Function parameter or member 'cmnd' not described in 'lpfc_get_scsi_buf' drivers/scsi/lpfc/lpfc_scsi.c:986: warning: Function parameter or member 'new_guard' not described in 'lpfc_bg_err_inject' drivers/scsi/lpfc/lpfc_scsi.c:1393: warning: Function parameter or member 'txop' not described in 'lpfc_sc_to_bg_opcodes' drivers/scsi/lpfc/lpfc_scsi.c:1393: warning: Function parameter or member 'rxop' not described in 'lpfc_sc_to_bg_opcodes' drivers/scsi/lpfc/lpfc_scsi.c:1393: warning: Excess function parameter 'txopt' description in 'lpfc_sc_to_bg_opcodes' drivers/scsi/lpfc/lpfc_scsi.c:1393: warning: Excess function parameter 'rxopt' description in 'lpfc_sc_to_bg_opcodes' drivers/scsi/lpfc/lpfc_scsi.c:1473: warning: Function parameter or member 'txop' not described in 'lpfc_bg_err_opcodes' drivers/scsi/lpfc/lpfc_scsi.c:1473: warning: Function parameter or member 'rxop' not described in 'lpfc_bg_err_opcodes' drivers/scsi/lpfc/lpfc_scsi.c:1473: warning: Excess function parameter 'txopt' description in 'lpfc_bg_err_opcodes' drivers/scsi/lpfc/lpfc_scsi.c:1473: warning: Excess function parameter 'rxopt' description in 'lpfc_bg_err_opcodes' drivers/scsi/lpfc/lpfc_scsi.c:1565: warning: Function parameter or member 'datasegcnt' not described in 'lpfc_bg_setup_bpl' drivers/scsi/lpfc/lpfc_scsi.c:1565: warning: Excess function parameter 'datacnt' description in 'lpfc_bg_setup_bpl' drivers/scsi/lpfc/lpfc_scsi.c:1951: warning: Function parameter or member 'datasegcnt' not described in 'lpfc_bg_setup_sgl' drivers/scsi/lpfc/lpfc_scsi.c:1951: warning: Function parameter or member 'lpfc_cmd' not described in 'lpfc_bg_setup_sgl' drivers/scsi/lpfc/lpfc_scsi.c:1951: warning: Excess function parameter 'datacnt' description in 'lpfc_bg_setup_sgl' drivers/scsi/lpfc/lpfc_scsi.c:2131: warning: Function parameter or member 'lpfc_cmd' not described in 'lpfc_bg_setup_sgl_prot' drivers/scsi/lpfc/lpfc_scsi.c:4476: warning: Function parameter or member 't' not described in 'lpfc_poll_timeout' drivers/scsi/lpfc/lpfc_scsi.c:4476: warning: Excess function parameter 'ptr' description in 'lpfc_poll_timeout' drivers/scsi/lpfc/lpfc_scsi.c:4503: warning: Function parameter or member 'shost' not described in 'lpfc_queuecommand' drivers/scsi/lpfc/lpfc_scsi.c:4503: warning: Excess function parameter 'done' description in 'lpfc_queuecommand' drivers/scsi/lpfc/lpfc_scsi.c:5035: warning: Function parameter or member 'cmnd' not described in 'lpfc_send_taskmgmt' drivers/scsi/lpfc/lpfc_scsi.c:5035: warning: Excess function parameter 'rdata' description in 'lpfc_send_taskmgmt' drivers/scsi/lpfc/lpfc_scsi.c:5688: warning: Function parameter or member 'phba' not described in 'lpfc_create_device_data' drivers/scsi/lpfc/lpfc_scsi.c:5688: warning: Function parameter or member 'pri' not described in 'lpfc_create_device_data' drivers/scsi/lpfc/lpfc_scsi.c:5688: warning: Excess function parameter 'pha' description in 'lpfc_create_device_data' drivers/scsi/lpfc/lpfc_scsi.c:5730: warning: Function parameter or member 'phba' not described in 'lpfc_delete_device_data' drivers/scsi/lpfc/lpfc_scsi.c:5730: warning: Excess function parameter 'pha' description in 'lpfc_delete_device_data' drivers/scsi/lpfc/lpfc_scsi.c:5762: warning: Function parameter or member 'phba' not described in '__lpfc_get_device_data' drivers/scsi/lpfc/lpfc_scsi.c:5762: warning: Excess function parameter 'pha' description in '__lpfc_get_device_data' drivers/scsi/lpfc/lpfc_scsi.c:5818: warning: Function parameter or member 'phba' not described in 'lpfc_find_next_oas_lun' drivers/scsi/lpfc/lpfc_scsi.c:5818: warning: Function parameter or member 'found_lun_pri' not described in 'lpfc_find_next_oas_lun' drivers/scsi/lpfc/lpfc_scsi.c:5818: warning: Excess function parameter 'pha' description in 'lpfc_find_next_oas_lun' drivers/scsi/lpfc/lpfc_scsi.c:5909: warning: Function parameter or member 'phba' not described in 'lpfc_enable_oas_lun' drivers/scsi/lpfc/lpfc_scsi.c:5909: warning: Function parameter or member 'pri' not described in 'lpfc_enable_oas_lun' drivers/scsi/lpfc/lpfc_scsi.c:5909: warning: Excess function parameter 'pha' description in 'lpfc_enable_oas_lun' drivers/scsi/lpfc/lpfc_scsi.c:5968: warning: Function parameter or member 'phba' not described in 'lpfc_disable_oas_lun' drivers/scsi/lpfc/lpfc_scsi.c:5968: warning: Function parameter or member 'pri' not described in 'lpfc_disable_oas_lun' drivers/scsi/lpfc/lpfc_scsi.c:5968: warning: Excess function parameter 'pha' description in 'lpfc_disable_oas_lun'

Cc James Smart <[email protected]>
Cc Dick Kennedy <[email protected]>
---
 drivers/scsi/lpfc/lpfc_scsi.c | 48 ++++++++++++++++++++++-------------
 1 file changed, 30 insertions(+), 18 deletions(-)
drivers/scsi/lpfc/lpfc_scsi.c +30 -18
index 4ffdfd2c8604d..0f0ab86cf1923 100644
@@ -313,7 +313,7 @@ lpfc_scsi_dev_block(struct lpfc_hba *phba)
 /**
  * lpfc_new_scsi_buf_s3 - Scsi buffer allocator for HBA with SLI3 IF spec
  * @vport: The virtual port for which this call being executed.
- * @num_to_allocate: The requested number of buffers to allocate.
+ * @num_to_alloc: The requested number of buffers to allocate.
  *
  * This routine allocates a scsi buffer for device with SLI-3 interface spec,
  * the scsi buffer contains all the necessary information needed to initiate
@@ -497,6 +497,7 @@ lpfc_sli4_vport_delete_fcp_xri_aborted(struct lpfc_vport *vport)
  * lpfc_sli4_io_xri_aborted - Fast-path process of fcp xri abort
  * @phba: pointer to lpfc hba data structure.
  * @axri: pointer to the fcp xri abort wcqe structure.
+ * @idx: index into hdwq
  *
  * This routine is invoked by the worker thread to process a SLI4 fast-path
  * FCP or NVME aborted xri.
@@ -579,6 +580,8 @@ lpfc_sli4_io_xri_aborted(struct lpfc_hba *phba,
 /**
  * lpfc_get_scsi_buf_s3 - Get a scsi buffer from lpfc_scsi_buf_list of the HBA
  * @phba: The HBA for which this call is being executed.
+ * @ndlp: pointer to a node-list data structure.
+ * @cmnd: Pointer to scsi_cmnd data structure.
  *
  * This routine removes a scsi buffer from head of @phba lpfc_scsi_buf_list list
  * and returns to caller.
@@ -618,6 +621,8 @@ lpfc_get_scsi_buf_s3(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp,
 /**
  * lpfc_get_scsi_buf_s4 - Get a scsi buffer from io_buf_list of the HBA
  * @phba: The HBA for which this call is being executed.
+ * @ndlp: pointer to a node-list data structure.
+ * @cmnd: Pointer to scsi_cmnd data structure.
  *
  * This routine removes a scsi buffer from head of @hdwq io_buf_list
  * and returns to caller.
@@ -730,6 +735,8 @@ lpfc_get_scsi_buf_s4(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp,
 /**
  * lpfc_get_scsi_buf - Get a scsi buffer from lpfc_scsi_buf_list of the HBA
  * @phba: The HBA for which this call is being executed.
+ * @ndlp: pointer to a node-list data structure.
+ * @cmnd: Pointer to scsi_cmnd data structure.
  *
  * This routine removes a scsi buffer from head of @phba lpfc_scsi_buf_list list
  * and returns to caller.
@@ -976,7 +983,7 @@ lpfc_scsi_prep_dma_buf_s3(struct lpfc_hba *phba, struct lpfc_io_buf *lpfc_cmd)
  * @sc: The SCSI command to examine
  * @reftag: (out) BlockGuard reference tag for transmitted data
  * @apptag: (out) BlockGuard application tag for transmitted data
- * @new_guard (in) Value to replace CRC with if needed
+ * @new_guard: (in) Value to replace CRC with if needed
  *
  * Returns BG_ERR_* bit mask or 0 if request ignored
  **/
@@ -1381,8 +1388,8 @@ lpfc_bg_err_inject(struct lpfc_hba *phba, struct scsi_cmnd *sc,
  * the specified SCSI command.
  * @phba: The Hba for which this call is being executed.
  * @sc: The SCSI command to examine
- * @txopt: (out) BlockGuard operation for transmitted data
- * @rxopt: (out) BlockGuard operation for received data
+ * @txop: (out) BlockGuard operation for transmitted data
+ * @rxop: (out) BlockGuard operation for received data
  *
  * Returns: zero on success; non-zero if tx and/or rx op cannot be determined
  *
@@ -1461,8 +1468,8 @@ lpfc_sc_to_bg_opcodes(struct lpfc_hba *phba, struct scsi_cmnd *sc,
  * the specified SCSI command in order to force a guard tag error.
  * @phba: The Hba for which this call is being executed.
  * @sc: The SCSI command to examine
- * @txopt: (out) BlockGuard operation for transmitted data
- * @rxopt: (out) BlockGuard operation for received data
+ * @txop: (out) BlockGuard operation for transmitted data
+ * @rxop: (out) BlockGuard operation for received data
  *
  * Returns: zero on success; non-zero if tx and/or rx op cannot be determined
  *
@@ -1533,7 +1540,7 @@ lpfc_bg_err_opcodes(struct lpfc_hba *phba, struct scsi_cmnd *sc,
  * @phba: The Hba for which this call is being executed.
  * @sc: pointer to scsi command we're working on
  * @bpl: pointer to buffer list for protection groups
- * @datacnt: number of segments of data that have been dma mapped
+ * @datasegcnt: number of segments of data that have been dma mapped
  *
  * This function sets up BPL buffer list for protection groups of
  * type LPFC_PG_TYPE_NO_DIF
@@ -1920,7 +1927,8 @@ lpfc_bg_setup_bpl_prot(struct lpfc_hba *phba, struct scsi_cmnd *sc,
  * @phba: The Hba for which this call is being executed.
  * @sc: pointer to scsi command we're working on
  * @sgl: pointer to buffer list for protection groups
- * @datacnt: number of segments of data that have been dma mapped
+ * @datasegcnt: number of segments of data that have been dma mapped
+ * @lpfc_cmd: lpfc scsi command object pointer.
  *
  * This function sets up SGL buffer list for protection groups of
  * type LPFC_PG_TYPE_NO_DIF
@@ -2094,6 +2102,7 @@ lpfc_bg_setup_sgl(struct lpfc_hba *phba, struct scsi_cmnd *sc,
  * @sgl: pointer to buffer list for protection groups
  * @datacnt: number of segments of data that have been dma mapped
  * @protcnt: number of segment of protection data that have been dma mapped
+ * @lpfc_cmd: lpfc scsi command object pointer.
  *
  * This function sets up SGL buffer list for protection groups of
  * type LPFC_PG_TYPE_DIF
@@ -4465,12 +4474,11 @@ void lpfc_poll_start_timer(struct lpfc_hba * phba)
 
 /**
  * lpfc_poll_timeout - Restart polling timer
- * @ptr: Map to lpfc_hba data structure pointer.
+ * @t: Timer construct where lpfc_hba data structure pointer is obtained.
  *
  * This routine restarts fcp_poll timer, when FCP ring  polling is enable
  * and FCP Ring interrupt is disable.
  **/
-
 void lpfc_poll_timeout(struct timer_list *t)
 {
 	struct lpfc_hba *phba = from_timer(phba, t, fcp_poll_timer);
@@ -4486,8 +4494,8 @@ void lpfc_poll_timeout(struct timer_list *t)
 
 /**
  * lpfc_queuecommand - scsi_host_template queuecommand entry point
+ * @shost: kernel scsi host pointer.
  * @cmnd: Pointer to scsi_cmnd data structure.
- * @done: Pointer to done routine.
  *
  * Driver registers this routine to scsi midlayer to submit a @cmd to process.
  * This routine prepares an IOCB from scsi command and provides to firmware.
@@ -5015,7 +5023,7 @@ lpfc_check_fcp_rsp(struct lpfc_vport *vport, struct lpfc_io_buf *lpfc_cmd)
 /**
  * lpfc_send_taskmgmt - Generic SCSI Task Mgmt Handler
  * @vport: The virtual port for which this call is being executed.
- * @rdata: Pointer to remote port local data
+ * @cmnd: Pointer to scsi_cmnd data structure.
  * @tgt_id: Target ID of remote device.
  * @lun_id: Lun number for the TMF
  * @task_mgmt_cmd: type of TMF to send
@@ -5664,10 +5672,11 @@ lpfc_slave_destroy(struct scsi_device *sdev)
 
 /**
  * lpfc_create_device_data - creates and initializes device data structure for OAS
- * @pha: Pointer to host bus adapter structure.
+ * @phba: Pointer to host bus adapter structure.
  * @vport_wwpn: Pointer to vport's wwpn information
  * @target_wwpn: Pointer to target's wwpn information
  * @lun: Lun on target
+ * @pri: Priority
  * @atomic_create: Flag to indicate if memory should be allocated using the
  *		  GFP_ATOMIC flag or not.
  *
@@ -5717,7 +5726,7 @@ lpfc_create_device_data(struct lpfc_hba *phba, struct lpfc_name *vport_wwpn,
 
 /**
  * lpfc_delete_device_data - frees a device data structure for OAS
- * @pha: Pointer to host bus adapter structure.
+ * @phba: Pointer to host bus adapter structure.
  * @lun_info: Pointer to device data structure to free.
  *
  * This routine frees the previously allocated device data structure passed.
@@ -5740,7 +5749,7 @@ lpfc_delete_device_data(struct lpfc_hba *phba,
 
 /**
  * __lpfc_get_device_data - returns the device data for the specified lun
- * @pha: Pointer to host bus adapter structure.
+ * @phba: Pointer to host bus adapter structure.
  * @list: Point to list to search.
  * @vport_wwpn: Pointer to vport's wwpn information
  * @target_wwpn: Pointer to target's wwpn information
@@ -5782,7 +5791,7 @@ __lpfc_get_device_data(struct lpfc_hba *phba, struct list_head *list,
 
 /**
  * lpfc_find_next_oas_lun - searches for the next oas lun
- * @pha: Pointer to host bus adapter structure.
+ * @phba: Pointer to host bus adapter structure.
  * @vport_wwpn: Pointer to vport's wwpn information
  * @target_wwpn: Pointer to target's wwpn information
  * @starting_lun: Pointer to the lun to start searching for
@@ -5790,6 +5799,7 @@ __lpfc_get_device_data(struct lpfc_hba *phba, struct list_head *list,
  * @found_target_wwpn: Pointer to the found lun's target wwpn information
  * @found_lun: Pointer to the found lun.
  * @found_lun_status: Pointer to status of the found lun.
+ * @found_lun_pri: Pointer to priority of the found lun.
  *
  * This routine searches the luns list for the specified lun
  * or the first lun for the vport/target.  If the vport wwpn contains
@@ -5884,10 +5894,11 @@ lpfc_find_next_oas_lun(struct lpfc_hba *phba, struct lpfc_name *vport_wwpn,
 
 /**
  * lpfc_enable_oas_lun - enables a lun for OAS operations
- * @pha: Pointer to host bus adapter structure.
+ * @phba: Pointer to host bus adapter structure.
  * @vport_wwpn: Pointer to vport's wwpn information
  * @target_wwpn: Pointer to target's wwpn information
  * @lun: Lun
+ * @pri: Priority
  *
  * This routine enables a lun for oas operations.  The routines does so by
  * doing the following :
@@ -5944,10 +5955,11 @@ lpfc_enable_oas_lun(struct lpfc_hba *phba, struct lpfc_name *vport_wwpn,
 
 /**
  * lpfc_disable_oas_lun - disables a lun for OAS operations
- * @pha: Pointer to host bus adapter structure.
+ * @phba: Pointer to host bus adapter structure.
  * @vport_wwpn: Pointer to vport's wwpn information
  * @target_wwpn: Pointer to target's wwpn information
  * @lun: Lun
+ * @pri: Priority
  *
  * This routine disables a lun for oas operations.  The routines does so by
  * doing the following :
Signature · 1 line
2.25.1
author
#4 lore raw

PATCH RESEND 4/19 scsi: lpfc: lpfc_attr: Demote kernel-doc format for redefined functions

In reply to Lee Jones

Kernel-doc does not understand this use-case.

Fixes the following W=1 kernel build warning(s):

from drivers/scsi/lpfc/lpfc_attr.c:26:
inlined from ‘lpfc_stat_data_ctrl_store’ at drivers/scsi/lpfc/lpfc_attr.c:4164:3:
drivers/scsi/lpfc/lpfc_attr.c:2315: warning: Excess function parameter 'dev' description in 'lpfc_param_show' drivers/scsi/lpfc/lpfc_attr.c:2315: warning: Excess function parameter 'buf' description in 'lpfc_param_show' drivers/scsi/lpfc/lpfc_attr.c:2343: warning: Excess function parameter 'dev' description in 'lpfc_param_hex_show' drivers/scsi/lpfc/lpfc_attr.c:2343: warning: Excess function parameter 'buf' description in 'lpfc_param_hex_show' drivers/scsi/lpfc/lpfc_attr.c:2377: warning: Function parameter or member 'attr' not described in 'lpfc_param_init' drivers/scsi/lpfc/lpfc_attr.c:2377: warning: Function parameter or member 'default' not described in 'lpfc_param_init' drivers/scsi/lpfc/lpfc_attr.c:2377: warning: Function parameter or member 'minval' not described in 'lpfc_param_init' drivers/scsi/lpfc/lpfc_attr.c:2377: warning: Function parameter or member 'maxval' not described in 'lpfc_param_init' drivers/scsi/lpfc/lpfc_attr.c:2377: warning: Excess function parameter 'phba' description in 'lpfc_param_init' drivers/scsi/lpfc/lpfc_attr.c:2377: warning: Excess function parameter 'val' description in 'lpfc_param_init' drivers/scsi/lpfc/lpfc_attr.c:2414: warning: Function parameter or member 'attr' not described in 'lpfc_param_set' drivers/scsi/lpfc/lpfc_attr.c:2414: warning: Function parameter or member 'default' not described in 'lpfc_param_set' drivers/scsi/lpfc/lpfc_attr.c:2414: warning: Function parameter or member 'minval' not described in 'lpfc_param_set' drivers/scsi/lpfc/lpfc_attr.c:2414: warning: Function parameter or member 'maxval' not described in 'lpfc_param_set' drivers/scsi/lpfc/lpfc_attr.c:2414: warning: Excess function parameter 'phba' description in 'lpfc_param_set' drivers/scsi/lpfc/lpfc_attr.c:2414: warning: Excess function parameter 'val' description in 'lpfc_param_set' drivers/scsi/lpfc/lpfc_attr.c:2454: warning: Excess function parameter 'dev' description in 'lpfc_param_store' drivers/scsi/lpfc/lpfc_attr.c:2454: warning: Excess function parameter 'buf' description in 'lpfc_param_store' drivers/scsi/lpfc/lpfc_attr.c:2454: warning: Excess function parameter 'count' description in 'lpfc_param_store' drivers/scsi/lpfc/lpfc_attr.c:2478: warning: Excess function parameter 'dev' description in 'lpfc_vport_param_show' drivers/scsi/lpfc/lpfc_attr.c:2478: warning: Excess function parameter 'buf' description in 'lpfc_vport_param_show' drivers/scsi/lpfc/lpfc_attr.c:2503: warning: Excess function parameter 'dev' description in 'lpfc_vport_param_hex_show' drivers/scsi/lpfc/lpfc_attr.c:2503: warning: Excess function parameter 'buf' description in 'lpfc_vport_param_hex_show' drivers/scsi/lpfc/lpfc_attr.c:2536: warning: Function parameter or member 'attr' not described in 'lpfc_vport_param_init' drivers/scsi/lpfc/lpfc_attr.c:2536: warning: Function parameter or member 'default' not described in 'lpfc_vport_param_init' drivers/scsi/lpfc/lpfc_attr.c:2536: warning: Function parameter or member 'minval' not described in 'lpfc_vport_param_init' drivers/scsi/lpfc/lpfc_attr.c:2536: warning: Function parameter or member 'maxval' not described in 'lpfc_vport_param_init' drivers/scsi/lpfc/lpfc_attr.c:2536: warning: Excess function parameter 'phba' description in 'lpfc_vport_param_init' drivers/scsi/lpfc/lpfc_attr.c:2536: warning: Excess function parameter 'val' description in 'lpfc_vport_param_init' drivers/scsi/lpfc/lpfc_attr.c:2572: warning: Function parameter or member 'attr' not described in 'lpfc_vport_param_set' drivers/scsi/lpfc/lpfc_attr.c:2572: warning: Function parameter or member 'default' not described in 'lpfc_vport_param_set' drivers/scsi/lpfc/lpfc_attr.c:2572: warning: Function parameter or member 'minval' not described in 'lpfc_vport_param_set' drivers/scsi/lpfc/lpfc_attr.c:2572: warning: Function parameter or member 'maxval' not described in 'lpfc_vport_param_set' drivers/scsi/lpfc/lpfc_attr.c:2572: warning: Excess function parameter 'phba' description in 'lpfc_vport_param_set' drivers/scsi/lpfc/lpfc_attr.c:2572: warning: Excess function parameter 'val' description in 'lpfc_vport_param_set' drivers/scsi/lpfc/lpfc_attr.c:2607: warning: Function parameter or member 'attr' not described in 'lpfc_vport_param_store' drivers/scsi/lpfc/lpfc_attr.c:2607: warning: Excess function parameter 'cdev' description in 'lpfc_vport_param_store' drivers/scsi/lpfc/lpfc_attr.c:2607: warning: Excess function parameter 'buf' description in 'lpfc_vport_param_store' drivers/scsi/lpfc/lpfc_attr.c:2607: warning: Excess function parameter 'count' description in 'lpfc_vport_param_store' drivers/scsi/lpfc/lpfc_attr.c:7081: warning: Function parameter or member 'field' not described in 'lpfc_rport_show_function' drivers/scsi/lpfc/lpfc_attr.c:7081: warning: Function parameter or member 'format_string' not described in 'lpfc_rport_show_function' drivers/scsi/lpfc/lpfc_attr.c:7081: warning: Function parameter or member 'sz' not described in 'lpfc_rport_show_function' drivers/scsi/lpfc/lpfc_attr.c:7081: warning: Function parameter or member 'cast' not described in 'lpfc_rport_show_function' drivers/scsi/lpfc/lpfc_attr.c:7081: warning: Excess function parameter 'cdev' description in 'lpfc_rport_show_function' drivers/scsi/lpfc/lpfc_attr.c:7081: warning: Excess function parameter 'buf' description in 'lpfc_rport_show_function'

Cc James Smart <[email protected]>
Cc Dick Kennedy <[email protected]>
---
 drivers/scsi/lpfc/lpfc_attr.c | 23 ++++++++++++-----------
 1 file changed, 12 insertions(+), 11 deletions(-)
drivers/scsi/lpfc/lpfc_attr.c +12 -11
index 0673d944c2a81..6a33f0607cc8b 100644
@@ -1501,6 +1501,7 @@ lpfc_sli4_pdev_status_reg_wait(struct lpfc_hba *phba)
 /**
  * lpfc_sli4_pdev_reg_request - Request physical dev to perform a register acc
  * @phba: lpfc_hba pointer.
+ * @opcode: The sli4 config command opcode.
  *
  * Description:
  * Request SLI4 interface type-2 device to perform a physical register set
@@ -2284,7 +2285,7 @@ lpfc_enable_bbcr_set(struct lpfc_hba *phba, uint val)
 	return -EINVAL;
 }
 
-/**
+/*
  * lpfc_param_show - Return a cfg attribute value in decimal
  *
  * Description:
@@ -2310,7 +2311,7 @@ lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \
 			phba->cfg_##attr);\
 }
 
-/**
+/*
  * lpfc_param_hex_show - Return a cfg attribute value in hex
  *
  * Description:
@@ -2338,7 +2339,7 @@ lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \
 			phba->cfg_##attr);\
 }
 
-/**
+/*
  * lpfc_param_init - Initializes a cfg attribute
  *
  * Description:
@@ -2372,7 +2373,7 @@ lpfc_##attr##_init(struct lpfc_hba *phba, uint val) \
 	return -EINVAL;\
 }
 
-/**
+/*
  * lpfc_param_set - Set a cfg attribute value
  *
  * Description:
@@ -2409,7 +2410,7 @@ lpfc_##attr##_set(struct lpfc_hba *phba, uint val) \
 	return -EINVAL;\
 }
 
-/**
+/*
  * lpfc_param_store - Set a vport attribute value
  *
  * Description:
@@ -2449,7 +2450,7 @@ lpfc_##attr##_store(struct device *dev, struct device_attribute *attr, \
 		return -EINVAL;\
 }
 
-/**
+/*
  * lpfc_vport_param_show - Return decimal formatted cfg attribute value
  *
  * Description:
@@ -2473,7 +2474,7 @@ lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \
 	return scnprintf(buf, PAGE_SIZE, "%d\n", vport->cfg_##attr);\
 }
 
-/**
+/*
  * lpfc_vport_param_hex_show - Return hex formatted attribute value
  *
  * Description:
@@ -2498,7 +2499,7 @@ lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \
 	return scnprintf(buf, PAGE_SIZE, "%#x\n", vport->cfg_##attr);\
 }
 
-/**
+/*
  * lpfc_vport_param_init - Initialize a vport cfg attribute
  *
  * Description:
@@ -2531,7 +2532,7 @@ lpfc_##attr##_init(struct lpfc_vport *vport, uint val) \
 	return -EINVAL;\
 }
 
-/**
+/*
  * lpfc_vport_param_set - Set a vport cfg attribute
  *
  * Description:
@@ -2567,7 +2568,7 @@ lpfc_##attr##_set(struct lpfc_vport *vport, uint val) \
 	return -EINVAL;\
 }
 
-/**
+/*
  * lpfc_vport_param_store - Set a vport attribute
  *
  * Description:
@@ -7061,7 +7062,7 @@ lpfc_set_rport_loss_tmo(struct fc_rport *rport, uint32_t timeout)
 #endif
 }
 
-/**
+/*
  * lpfc_rport_show_function - Return rport target information
  *
  * Description:
Signature · 1 line
2.25.1
author
#5 lore raw

PATCH RESEND 5/19 scsi: lpfc: lpfc_attr: Fix-up a bunch of kernel-doc misdemeanours

In reply to Lee Jones

Fixes the following W=1 kernel build warning(s):

from drivers/scsi/lpfc/lpfc_attr.c:26:
inlined from ‘lpfc_stat_data_ctrl_store’ at drivers/scsi/lpfc/lpfc_attr.c:4165:3:
drivers/scsi/lpfc/lpfc_attr.c:2537: warning: Function parameter or member 'attr' not described in 'lpfc_vport_param_init' drivers/scsi/lpfc/lpfc_attr.c:2537: warning: Function parameter or member 'default' not described in 'lpfc_vport_param_init' drivers/scsi/lpfc/lpfc_attr.c:2537: warning: Function parameter or member 'minval' not described in 'lpfc_vport_param_init' drivers/scsi/lpfc/lpfc_attr.c:2537: warning: Function parameter or member 'maxval' not described in 'lpfc_vport_param_init' drivers/scsi/lpfc/lpfc_attr.c:2537: warning: Excess function parameter 'phba' description in 'lpfc_vport_param_init' drivers/scsi/lpfc/lpfc_attr.c:2537: warning: Excess function parameter 'val' description in 'lpfc_vport_param_init' drivers/scsi/lpfc/lpfc_attr.c:2792: warning: Function parameter or member 'dev' not described in 'lpfc_soft_wwpn_store' drivers/scsi/lpfc/lpfc_attr.c:2886: warning: Function parameter or member 'dev' not described in 'lpfc_soft_wwnn_store' drivers/scsi/lpfc/lpfc_attr.c:2886: warning: Function parameter or member 'attr' not described in 'lpfc_soft_wwnn_store' drivers/scsi/lpfc/lpfc_attr.c:2886: warning: Excess function parameter 'cdev' description in 'lpfc_soft_wwnn_store' drivers/scsi/lpfc/lpfc_attr.c:3224: warning: Function parameter or member 'vpt_wwpn' not described in 'lpfc_oas_lun_state_set' drivers/scsi/lpfc/lpfc_attr.c:3224: warning: Function parameter or member 'tgt_wwpn' not described in 'lpfc_oas_lun_state_set' drivers/scsi/lpfc/lpfc_attr.c:3224: warning: Function parameter or member 'pri' not described in 'lpfc_oas_lun_state_set' drivers/scsi/lpfc/lpfc_attr.c:3224: warning: Excess function parameter 'ndlp' description in 'lpfc_oas_lun_state_set' drivers/scsi/lpfc/lpfc_attr.c:3264: warning: Function parameter or member 'lun_pri' not described in 'lpfc_oas_lun_get_next' drivers/scsi/lpfc/lpfc_attr.c:3302: warning: Function parameter or member 'pri' not described in 'lpfc_oas_lun_state_change' drivers/scsi/lpfc/lpfc_attr.c:3376: warning: Function parameter or member 'count' not described in 'lpfc_oas_lun_store' drivers/scsi/lpfc/lpfc_attr.c:3835: warning: Function parameter or member 'vport' not described in 'lpfc_tgt_queue_depth_set' drivers/scsi/lpfc/lpfc_attr.c:3835: warning: Excess function parameter 'phba' description in 'lpfc_tgt_queue_depth_set' drivers/scsi/lpfc/lpfc_attr.c:4026: warning: Function parameter or member 'dev' not described in 'lpfc_topology_store' drivers/scsi/lpfc/lpfc_attr.c:4026: warning: Function parameter or member 'attr' not described in 'lpfc_topology_store' drivers/scsi/lpfc/lpfc_attr.c:4026: warning: Function parameter or member 'buf' not described in 'lpfc_topology_store' drivers/scsi/lpfc/lpfc_attr.c:4026: warning: Function parameter or member 'count' not described in 'lpfc_topology_store' drivers/scsi/lpfc/lpfc_attr.c:4026: warning: Excess function parameter 'phba' description in 'lpfc_topology_store' drivers/scsi/lpfc/lpfc_attr.c:4026: warning: Excess function parameter 'val' description in 'lpfc_topology_store' drivers/scsi/lpfc/lpfc_attr.c:4148: warning: Function parameter or member 'attr' not described in 'lpfc_stat_data_ctrl_store' drivers/scsi/lpfc/lpfc_attr.c:4302: warning: Function parameter or member 'attr' not described in 'lpfc_stat_data_ctrl_show' drivers/scsi/lpfc/lpfc_attr.c:4383: warning: Function parameter or member 'buf' not described in 'sysfs_drvr_stat_data_read' drivers/scsi/lpfc/lpfc_attr.c:4383: warning: Excess function parameter 'buff' description in 'sysfs_drvr_stat_data_read' drivers/scsi/lpfc/lpfc_attr.c:4476: warning: Function parameter or member 'dev' not described in 'lpfc_link_speed_store' drivers/scsi/lpfc/lpfc_attr.c:4476: warning: Function parameter or member 'attr' not described in 'lpfc_link_speed_store' drivers/scsi/lpfc/lpfc_attr.c:4476: warning: Function parameter or member 'buf' not described in 'lpfc_link_speed_store' drivers/scsi/lpfc/lpfc_attr.c:4476: warning: Function parameter or member 'count' not described in 'lpfc_link_speed_store' drivers/scsi/lpfc/lpfc_attr.c:4476: warning: Excess function parameter 'phba' description in 'lpfc_link_speed_store' drivers/scsi/lpfc/lpfc_attr.c:4476: warning: Excess function parameter 'val' description in 'lpfc_link_speed_store' drivers/scsi/lpfc/lpfc_attr.c:7117: warning: Function parameter or member 'verbose' not described in 'lpfc_hba_log_verbose_init'

Cc James Smart <[email protected]>
Cc Dick Kennedy <[email protected]>
---
 drivers/scsi/lpfc/lpfc_attr.c | 33 +++++++++++++++++++++++----------
 1 file changed, 23 insertions(+), 10 deletions(-)
drivers/scsi/lpfc/lpfc_attr.c +23 -10
index 6a33f0607cc8b..ada231d4f0c6a 100644
@@ -2771,7 +2771,7 @@ lpfc_soft_wwpn_show(struct device *dev, struct device_attribute *attr,
 
 /**
  * lpfc_soft_wwpn_store - Set the ww port name of the adapter
- * @dev class device that is converted into a Scsi_host.
+ * @dev: class device that is converted into a Scsi_host.
  * @attr: device attribute, not used.
  * @buf: contains the wwpn in hexadecimal.
  * @count: number of wwpn bytes in buf
@@ -2868,7 +2868,8 @@ lpfc_soft_wwnn_show(struct device *dev, struct device_attribute *attr,
 
 /**
  * lpfc_soft_wwnn_store - sets the ww node name of the adapter
- * @cdev: class device that is converted into a Scsi_host.
+ * @dev: class device that is converted into a Scsi_host.
+ * @attr: device attribute, not used.
  * @buf: contains the ww node name in hexadecimal.
  * @count: number of wwnn bytes in buf.
  *
@@ -3204,9 +3205,11 @@ static DEVICE_ATTR(lpfc_xlane_lun_status, S_IRUGO,
  * lpfc_oas_lun_state_set - enable or disable a lun for Optimized Access Storage
  *			   (OAS) operations.
  * @phba: lpfc_hba pointer.
- * @ndlp: pointer to fcp target node.
+ * @vpt_wwpn: wwpn of the vport associated with the returned lun
+ * @tgt_wwpn: wwpn of the target associated with the returned lun
  * @lun: the fc lun for setting oas state.
  * @oas_state: the oas state to be set to the lun.
+ * @pri: priority
  *
  * Returns:
  * SUCCESS : 0
@@ -3244,6 +3247,7 @@ lpfc_oas_lun_state_set(struct lpfc_hba *phba, uint8_t vpt_wwpn[],
  * @vpt_wwpn: wwpn of the vport associated with the returned lun
  * @tgt_wwpn: wwpn of the target associated with the returned lun
  * @lun_status: status of the lun returned lun
+ * @lun_pri: priority of the lun returned lun
  *
  * Returns the first or next lun enabled for OAS operations for the vport/target
  * specified.  If a lun is found, its vport wwpn, target wwpn and status is
@@ -3282,6 +3286,7 @@ lpfc_oas_lun_get_next(struct lpfc_hba *phba, uint8_t vpt_wwpn[],
  * @tgt_wwpn: target wwpn by reference.
  * @lun: the fc lun for setting oas state.
  * @oas_state: the oas state to be set to the oas_lun.
+ * @pri: priority
  *
  * This routine enables (OAS_LUN_ENABLE) or disables (OAS_LUN_DISABLE)
  * a lun for OAS operations.
@@ -3356,6 +3361,7 @@ lpfc_oas_lun_show(struct device *dev, struct device_attribute *attr,
  * @dev: class device that is converted into a Scsi_host.
  * @attr: device attribute, not used.
  * @buf: buffer for passing information.
+ * @count: size of the formatting string
  *
  * This function sets the OAS state for lun.  Before this function is called,
  * the vport wwpn, target wwpn, and oas state need to be set.
@@ -3817,7 +3823,7 @@ lpfc_vport_param_init(tgt_queue_depth, LPFC_MAX_TGT_QDEPTH,
 
 /**
  * lpfc_tgt_queue_depth_store: Sets an attribute value.
- * @phba: pointer the the adapter structure.
+ * @vport: lpfc vport structure pointer.
  * @val: integer attribute value.
  *
  * Description: Sets the parameter to the new value.
@@ -4002,8 +4008,10 @@ LPFC_ATTR(topology, 0, 0, 6,
 
 /**
  * lpfc_topology_set - Set the adapters topology field
- * @phba: lpfc_hba pointer.
- * @val: topology value.
+ * @dev: class device that is converted into a scsi_host.
+ * @attr:device attribute, not used.
+ * @buf: buffer for passing information.
+ * @count: size of the data buffer.
  *
  * Description:
  * If val is in a valid range then set the adapter's topology field and
@@ -4122,6 +4130,7 @@ static DEVICE_ATTR_RO(lpfc_static_vport);
 /**
  * lpfc_stat_data_ctrl_store - write call back for lpfc_stat_data_ctrl sysfs file
  * @dev: Pointer to class device.
+ * @attr: Unused.
  * @buf: Data buffer.
  * @count: Size of the data buffer.
  *
@@ -4285,7 +4294,8 @@ lpfc_stat_data_ctrl_store(struct device *dev, struct device_attribute *attr,
 
 /**
  * lpfc_stat_data_ctrl_show - Read function for lpfc_stat_data_ctrl sysfs file
- * @dev: Pointer to class device object.
+ * @dev: Pointer to class device.
+ * @attr: Unused.
  * @buf: Data buffer.
  *
  * This function is the read call back function for
@@ -4364,7 +4374,7 @@ static DEVICE_ATTR_RW(lpfc_stat_data_ctrl);
  * @filp: sysfs file
  * @kobj: Pointer to the kernel object
  * @bin_attr: Attribute object
- * @buff: Buffer pointer
+ * @buf: Buffer pointer
  * @off: File offset
  * @count: Buffer size
  *
@@ -4451,8 +4461,10 @@ static struct bin_attribute sysfs_drvr_stat_data_attr = {
 */
 /**
  * lpfc_link_speed_set - Set the adapters link speed
- * @phba: lpfc_hba pointer.
- * @val: link speed value.
+ * @dev: Pointer to class device.
+ * @attr: Unused.
+ * @buf: Data buffer.
+ * @count: Size of the data buffer.
  *
  * Description:
  * If val is in a valid range then set the adapter's link speed field and
@@ -7111,6 +7123,7 @@ lpfc_set_vport_symbolic_name(struct fc_vport *fc_vport)
 /**
  * lpfc_hba_log_verbose_init - Set hba's log verbose level
  * @phba: Pointer to lpfc_hba struct.
+ * @verbose: Verbose level to set.
  *
  * This function is called by the lpfc_get_cfgparam() routine to set the
  * module lpfc_log_verbose into the @phba cfg_log_verbose for use with
Signature · 1 line
2.25.1
author
#6 lore raw

PATCH RESEND 6/19 scsi: lpfc: lpfc_debugfs: Fix a couple of function documentation issues

In reply to Lee Jones

Fixes the following W=1 kernel build warning(s):

drivers/scsi/lpfc/lpfc_debugfs.c:4204: warning: Function parameter or member 'len' not described in 'lpfc_idiag_queacc_read_qe' drivers/scsi/lpfc/lpfc_debugfs.c:4781: warning: Function parameter or member 'ctlregid' not described in 'lpfc_idiag_ctlacc_read_reg' drivers/scsi/lpfc/lpfc_debugfs.c:4781: warning: Excess function parameter 'drbregid' description in 'lpfc_idiag_ctlacc_read_reg'

Cc James Smart <[email protected]>
Cc Dick Kennedy <[email protected]>
---
 drivers/scsi/lpfc/lpfc_debugfs.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/scsi/lpfc/lpfc_debugfs.c +2 -1
index 325081ac65539..5a354abcbafc4 100644
@@ -4186,6 +4186,7 @@ lpfc_idiag_que_param_check(struct lpfc_queue *q, int index, int count)
 /**
  * lpfc_idiag_queacc_read_qe - read a single entry from the given queue index
  * @pbuffer: The pointer to buffer to copy the read data into.
+ * @len: Length of the buffer.
  * @pque: The pointer to the queue to be read.
  * @index: The index into the queue entry.
  *
@@ -4762,7 +4763,7 @@ lpfc_idiag_drbacc_write(struct file *file, const char __user *buf,
  * @phba: The pointer to hba structure.
  * @pbuffer: The pointer to the buffer to copy the data to.
  * @len: The length of bytes to copied.
- * @drbregid: The id to doorbell registers.
+ * @ctlregid: The id to doorbell registers.
  *
  * Description:
  * This routine reads a control register and copies its content to the
Signature · 1 line
2.25.1
author
#7 lore raw

PATCH RESEND 7/19 scsi: lpfc: lpfc_bsg: Provide correct documentation for a bunch of functions

In reply to Lee Jones

Fixes the following W=1 kernel build warning(s):

drivers/scsi/lpfc/lpfc_bsg.c:917: warning: Function parameter or member 'phba' not described in 'lpfc_bsg_ct_unsol_event' drivers/scsi/lpfc/lpfc_bsg.c:917: warning: Function parameter or member 'pring' not described in 'lpfc_bsg_ct_unsol_event' drivers/scsi/lpfc/lpfc_bsg.c:1484: warning: Function parameter or member 'cmp' not described in 'lpfc_issue_ct_rsp' drivers/scsi/lpfc/lpfc_bsg.c:3900: warning: Function parameter or member 'job' not described in 'lpfc_bsg_sli_cfg_read_cmd_ext' drivers/scsi/lpfc/lpfc_bsg.c:3900: warning: Function parameter or member 'dmabuf' not described in 'lpfc_bsg_sli_cfg_read_cmd_ext' drivers/scsi/lpfc/lpfc_bsg.c:3900: warning: Excess function parameter 'mb' description in 'lpfc_bsg_sli_cfg_read_cmd_ext' drivers/scsi/lpfc/lpfc_bsg.c:3900: warning: Excess function parameter 'dmabuff' description in 'lpfc_bsg_sli_cfg_read_cmd_ext' drivers/scsi/lpfc/lpfc_bsg.c:4088: warning: Function parameter or member 'job' not described in 'lpfc_bsg_sli_cfg_write_cmd_ext' drivers/scsi/lpfc/lpfc_bsg.c:4088: warning: Function parameter or member 'nemb_tp' not described in 'lpfc_bsg_sli_cfg_write_cmd_ext' drivers/scsi/lpfc/lpfc_bsg.c:4088: warning: Function parameter or member 'dmabuf' not described in 'lpfc_bsg_sli_cfg_write_cmd_ext' drivers/scsi/lpfc/lpfc_bsg.c:4088: warning: Excess function parameter 'mb' description in 'lpfc_bsg_sli_cfg_write_cmd_ext' drivers/scsi/lpfc/lpfc_bsg.c:4088: warning: Excess function parameter 'dmabuff' description in 'lpfc_bsg_sli_cfg_write_cmd_ext' drivers/scsi/lpfc/lpfc_bsg.c:4254: warning: Function parameter or member 'job' not described in 'lpfc_bsg_handle_sli_cfg_mbox' drivers/scsi/lpfc/lpfc_bsg.c:4254: warning: Function parameter or member 'dmabuf' not described in 'lpfc_bsg_handle_sli_cfg_mbox' drivers/scsi/lpfc/lpfc_bsg.c:4254: warning: Excess function parameter 'mb' description in 'lpfc_bsg_handle_sli_cfg_mbox' drivers/scsi/lpfc/lpfc_bsg.c:4254: warning: Excess function parameter 'dmabuff' description in 'lpfc_bsg_handle_sli_cfg_mbox' drivers/scsi/lpfc/lpfc_bsg.c:4403: warning: Function parameter or member 'job' not described in 'lpfc_bsg_read_ebuf_get' drivers/scsi/lpfc/lpfc_bsg.c:4403: warning: Excess function parameter 'dmabuf' description in 'lpfc_bsg_read_ebuf_get' drivers/scsi/lpfc/lpfc_bsg.c:4474: warning: Function parameter or member 'job' not described in 'lpfc_bsg_write_ebuf_set' drivers/scsi/lpfc/lpfc_bsg.c:4600: warning: Function parameter or member 'job' not described in 'lpfc_bsg_handle_sli_cfg_ebuf' drivers/scsi/lpfc/lpfc_bsg.c:4600: warning: Function parameter or member 'dmabuf' not described in 'lpfc_bsg_handle_sli_cfg_ebuf' drivers/scsi/lpfc/lpfc_bsg.c:4600: warning: Excess function parameter 'mb' description in 'lpfc_bsg_handle_sli_cfg_ebuf' drivers/scsi/lpfc/lpfc_bsg.c:4600: warning: Excess function parameter 'dmabuff' description in 'lpfc_bsg_handle_sli_cfg_ebuf' drivers/scsi/lpfc/lpfc_bsg.c:4645: warning: Function parameter or member 'job' not described in 'lpfc_bsg_handle_sli_cfg_ext' drivers/scsi/lpfc/lpfc_bsg.c:4645: warning: Function parameter or member 'dmabuf' not described in 'lpfc_bsg_handle_sli_cfg_ext' drivers/scsi/lpfc/lpfc_bsg.c:4645: warning: Excess function parameter 'mb' description in 'lpfc_bsg_handle_sli_cfg_ext' drivers/scsi/lpfc/lpfc_bsg.c:4645: warning: Excess function parameter 'dmabuff' description in 'lpfc_bsg_handle_sli_cfg_ext' drivers/scsi/lpfc/lpfc_bsg.c:4723: warning: Function parameter or member 'job' not described in 'lpfc_bsg_issue_mbox' drivers/scsi/lpfc/lpfc_bsg.c:4723: warning: Excess function parameter 'mb' description in 'lpfc_bsg_issue_mbox'

Cc James Smart <[email protected]>
Cc Dick Kennedy <[email protected]>
---
 drivers/scsi/lpfc/lpfc_bsg.c | 34 +++++++++++++++++-----------------
 1 file changed, 17 insertions(+), 17 deletions(-)
drivers/scsi/lpfc/lpfc_bsg.c +17 -17
index 5b66b8ea83635..abe7c53f8caa4 100644
@@ -902,11 +902,8 @@ diag_cmd_data_free(struct lpfc_hba *phba, struct lpfc_dmabufext *mlist)
 	return 0;
 }
 
-/**
+/*
  * lpfc_bsg_ct_unsol_event - process an unsolicited CT command
- * @phba:
- * @pring:
- * @piocbq:
  *
  * This function is called when an unsolicited CT command is received.  It
  * forwards the event to any processes registered to receive CT events.
@@ -1455,7 +1452,8 @@ lpfc_issue_ct_rsp_cmp(struct lpfc_hba *phba,
  * @phba: Pointer to HBA context object.
  * @job: Pointer to the job object.
  * @tag: tag index value into the ports context exchange array.
- * @bmp: Pointer to a dma buffer descriptor.
+ * @cmp: Pointer to a cmp dma buffer descriptor.
+ * @bmp: Pointer to a bmp dma buffer descriptor.
  * @num_entry: Number of enties in the bde.
  **/
 static int
@@ -3867,9 +3865,9 @@ lpfc_bsg_sli_cfg_dma_desc_setup(struct lpfc_hba *phba, enum nemb_type nemb_tp,
 /**
  * lpfc_bsg_sli_cfg_mse_read_cmd_ext - sli_config non-embedded mailbox cmd read
  * @phba: Pointer to HBA context object.
- * @mb: Pointer to a BSG mailbox object.
+ * @job: Pointer to the job object.
  * @nemb_tp: Enumerate of non-embedded mailbox command type.
- * @dmabuff: Pointer to a DMA buffer descriptor.
+ * @dmabuf: Pointer to a DMA buffer descriptor.
  *
  * This routine performs SLI_CONFIG (0x9B) read mailbox command operation with
  * non-embedded external bufffers.
@@ -4056,8 +4054,9 @@ lpfc_bsg_sli_cfg_read_cmd_ext(struct lpfc_hba *phba, struct bsg_job *job,
 /**
  * lpfc_bsg_sli_cfg_write_cmd_ext - sli_config non-embedded mailbox cmd write
  * @phba: Pointer to HBA context object.
- * @mb: Pointer to a BSG mailbox object.
- * @dmabuff: Pointer to a DMA buffer descriptor.
+ * @job: Pointer to the job object.
+ * @nemb_tp: Enumerate of non-embedded mailbox command type.
+ * @dmabuf: Pointer to a DMA buffer descriptor.
  *
  * This routine performs SLI_CONFIG (0x9B) write mailbox command operation with
  * non-embedded external bufffers.
@@ -4222,8 +4221,8 @@ lpfc_bsg_sli_cfg_write_cmd_ext(struct lpfc_hba *phba, struct bsg_job *job,
 /**
  * lpfc_bsg_handle_sli_cfg_mbox - handle sli-cfg mailbox cmd with ext buffer
  * @phba: Pointer to HBA context object.
- * @mb: Pointer to a BSG mailbox object.
- * @dmabuff: Pointer to a DMA buffer descriptor.
+ * @job: Pointer to the job object.
+ * @dmabuf: Pointer to a DMA buffer descriptor.
  *
  * This routine handles SLI_CONFIG (0x9B) mailbox command with non-embedded
  * external bufffers, including both 0x9B with non-embedded MSEs and 0x9B
@@ -4374,7 +4373,7 @@ lpfc_bsg_mbox_ext_abort(struct lpfc_hba *phba)
 /**
  * lpfc_bsg_read_ebuf_get - get the next mailbox read external buffer
  * @phba: Pointer to HBA context object.
- * @dmabuf: Pointer to a DMA buffer descriptor.
+ * @job: Pointer to the job object.
  *
  * This routine extracts the next mailbox read external buffer back to
  * user space through BSG.
@@ -4444,6 +4443,7 @@ lpfc_bsg_read_ebuf_get(struct lpfc_hba *phba, struct bsg_job *job)
 /**
  * lpfc_bsg_write_ebuf_set - set the next mailbox write external buffer
  * @phba: Pointer to HBA context object.
+ * @job: Pointer to the job object.
  * @dmabuf: Pointer to a DMA buffer descriptor.
  *
  * This routine sets up the next mailbox read external buffer obtained
@@ -4569,8 +4569,8 @@ lpfc_bsg_write_ebuf_set(struct lpfc_hba *phba, struct bsg_job *job,
 /**
  * lpfc_bsg_handle_sli_cfg_ebuf - handle ext buffer with sli-cfg mailbox cmd
  * @phba: Pointer to HBA context object.
- * @mb: Pointer to a BSG mailbox object.
- * @dmabuff: Pointer to a DMA buffer descriptor.
+ * @job: Pointer to the job object.
+ * @dmabuf: Pointer to a DMA buffer descriptor.
  *
  * This routine handles the external buffer with SLI_CONFIG (0x9B) mailbox
  * command with multiple non-embedded external buffers.
@@ -4614,8 +4614,8 @@ lpfc_bsg_handle_sli_cfg_ebuf(struct lpfc_hba *phba, struct bsg_job *job,
 /**
  * lpfc_bsg_handle_sli_cfg_ext - handle sli-cfg mailbox with external buffer
  * @phba: Pointer to HBA context object.
- * @mb: Pointer to a BSG mailbox object.
- * @dmabuff: Pointer to a DMA buffer descriptor.
+ * @job: Pointer to the job object.
+ * @dmabuf: Pointer to a DMA buffer descriptor.
  *
  * This routine checkes and handles non-embedded multi-buffer SLI_CONFIG
  * (0x9B) mailbox commands and external buffers.
@@ -4688,7 +4688,7 @@ lpfc_bsg_handle_sli_cfg_ext(struct lpfc_hba *phba, struct bsg_job *job,
 /**
  * lpfc_bsg_issue_mbox - issues a mailbox command on behalf of an app
  * @phba: Pointer to HBA context object.
- * @mb: Pointer to a mailbox object.
+ * @job: Pointer to the job object.
  * @vport: Pointer to a vport object.
  *
  * Allocate a tracking object, mailbox command memory, get a mailbox
Signature · 1 line
2.25.1
author
#8 lore raw

PATCH RESEND 8/19 scsi: esas2r: esas2r_disc: Place brackets around a potentially empty if()

In reply to Lee Jones

Fixes the following W=1 kernel build warning(s):

drivers/scsi/esas2r/esas2r_disc.c: In function ‘esas2r_disc_get_phys_addr’:
drivers/scsi/esas2r/esas2r_disc.c:1035:17: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]

Cc Bradley Grove <[email protected]>
---
 drivers/scsi/esas2r/esas2r_disc.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/scsi/esas2r/esas2r_disc.c +2 -1
index 1c079f4300a56..ba42536d1e87a 100644
@@ -1031,8 +1031,9 @@ static u32 esas2r_disc_get_phys_addr(struct esas2r_sg_context *sgc, u64 *addr)
 {
 	struct esas2r_adapter *a = sgc->adapter;
 
-	if (sgc->length > ESAS2R_DISC_BUF_LEN)
+	if (sgc->length > ESAS2R_DISC_BUF_LEN) {
 		esas2r_bugon();
+	}
 
 	*addr = a->uncached_phys
 		+ (u64)((u8 *)a->disc_buffer - a->uncached);
Signature · 1 line
2.25.1
author
#9 lore raw

PATCH RESEND 9/19 scsi: esas2r: esas2r_init: Place brackets around a potentially empty if()

In reply to Lee Jones

Fixes the following W=1 kernel build warning(s):

drivers/scsi/esas2r/esas2r_init.c: In function ‘esas2r_init_adapter’:
drivers/scsi/esas2r/esas2r_init.c:418:41: warning: suggest braces around empty body in an ‘else’ statement [-Wempty-body]

Cc Bradley Grove <[email protected]>
---
 drivers/scsi/esas2r/esas2r_init.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
drivers/scsi/esas2r/esas2r_init.c +3 -2
index 09c5c24bf391f..4b91db7ba919c 100644
@@ -412,10 +412,11 @@ int esas2r_init_adapter(struct Scsi_Host *host, struct pci_dev *pcid,
 	esas2r_disable_chip_interrupts(a);
 	esas2r_check_adapter(a);
 
-	if (!esas2r_init_adapter_hw(a, true))
+	if (!esas2r_init_adapter_hw(a, true)) {
 		esas2r_log(ESAS2R_LOG_CRIT, "failed to initialize hardware!");
-	else
+	} else {
 		esas2r_debug("esas2r_init_adapter ok");
+	}
 
 	esas2r_claim_interrupts(a);
 
Signature · 1 line
2.25.1
author
#10 lore raw

PATCH RESEND 10/19 scsi: lpfc: lpfc_nvme: Remove unused variable 'phba'

In reply to Lee Jones

Fixes the following W=1 kernel build warning(s):

drivers/scsi/lpfc/lpfc_nvme.c: In function ‘lpfc_nvme_ls_abort’:
drivers/scsi/lpfc/lpfc_nvme.c:943:19: warning: variable ‘phba’ set but not used [-Wunused-but-set-variable]

Cc James Smart <[email protected]>
Cc Dick Kennedy <[email protected]>
---
 drivers/scsi/lpfc/lpfc_nvme.c | 2 --
 1 file changed, 2 deletions(-)
drivers/scsi/lpfc/lpfc_nvme.c +0 -2
index 69f1a0457f51e..33d007ca5c8e6 100644
@@ -940,7 +940,6 @@ lpfc_nvme_ls_abort(struct nvme_fc_local_port *pnvme_lport,
 {
 	struct lpfc_nvme_lport *lport;
 	struct lpfc_vport *vport;
-	struct lpfc_hba *phba;
 	struct lpfc_nodelist *ndlp;
 	int ret;
 
@@ -948,7 +947,6 @@ lpfc_nvme_ls_abort(struct nvme_fc_local_port *pnvme_lport,
 	if (unlikely(!lport))
 		return;
 	vport = lport->vport;
-	phba = vport->phba;
 
 	if (vport->load_flag & FC_UNLOADING)
 		return;
Signature · 1 line
2.25.1
author
#11 lore raw

PATCH RESEND 11/19 scsi: ufs: ufshcd: Fix some function doc-rot

In reply to Lee Jones

Fixes the following W=1 kernel build warning(s):

drivers/scsi/ufs/ufshcd.c:6603: warning: Function parameter or member 'hba' not described in 'ufshcd_try_to_abort_task' drivers/scsi/ufs/ufshcd.c:6603: warning: Function parameter or member 'tag' not described in 'ufshcd_try_to_abort_task' drivers/scsi/ufs/ufshcd.c:6603: warning: Excess function parameter 'cmd' description in 'ufshcd_try_to_abort_task'

Cc Alim Akhtar <[email protected]>
Cc Avri Altman <[email protected]>
Cc Santosh Yaraganavi <[email protected]>
Cc Vinayak Holikatti <[email protected]>
---
 drivers/scsi/ufs/ufshcd.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/scsi/ufs/ufshcd.c +2 -1
index 2309253d3101c..7ba3e923eb585 100644
@@ -6594,7 +6594,8 @@ static void ufshcd_set_req_abort_skip(struct ufs_hba *hba, unsigned long bitmap)
 
 /**
  * ufshcd_try_to_abort_task - abort a specific task
- * @cmd: SCSI command pointer
+ * @hba: Pointer to adapter instance
+ * @tag: Task tag/index to be aborted
  *
  * Abort the pending command in device by sending UFS_ABORT_TASK task management
  * command, and in host controller by clearing the door-bell register. There can
Signature · 1 line
2.25.1
author
#12 lore raw

PATCH RESEND 12/19 scsi: lpfc: lpfc_nvme: Fix some kernel-doc related issues

In reply to Lee Jones

Fixes the following W=1 kernel build warning(s):

drivers/scsi/lpfc/lpfc_nvme.c: In function ‘lpfc_nvme_ls_abort’:
drivers/scsi/lpfc/lpfc_nvme.c:943:19: warning: variable ‘phba’ set but not used [-Wunused-but-set-variable] drivers/scsi/lpfc/lpfc_nvme.c:256: warning: Excess function parameter 'lpfc_pnvme' description in 'lpfc_nvme_create_queue' drivers/scsi/lpfc/lpfc_nvme.c:804: warning: Function parameter or member 'pnvme_rport' not described in 'lpfc_nvme_ls_req' drivers/scsi/lpfc/lpfc_nvme.c:804: warning: Excess function parameter 'nvme_rport' description in 'lpfc_nvme_ls_req' drivers/scsi/lpfc/lpfc_nvme.c:1312: warning: Function parameter or member 'lpfc_ncmd' not described in 'lpfc_nvme_prep_io_cmd' drivers/scsi/lpfc/lpfc_nvme.c:1312: warning: Excess function parameter 'lpfcn_cmd' description in 'lpfc_nvme_prep_io_cmd' drivers/scsi/lpfc/lpfc_nvme.c:1416: warning: Function parameter or member 'lpfc_ncmd' not described in 'lpfc_nvme_prep_io_dma' drivers/scsi/lpfc/lpfc_nvme.c:1416: warning: Excess function parameter 'lpfcn_cmd' description in 'lpfc_nvme_prep_io_dma' drivers/scsi/lpfc/lpfc_nvme.c:1594: warning: bad line: indicated in @lpfc_nvme_rport. drivers/scsi/lpfc/lpfc_nvme.c:1605: warning: Function parameter or member 'pnvme_lport' not described in 'lpfc_nvme_fcp_io_submit' drivers/scsi/lpfc/lpfc_nvme.c:1605: warning: Function parameter or member 'pnvme_rport' not described in 'lpfc_nvme_fcp_io_submit' drivers/scsi/lpfc/lpfc_nvme.c:1605: warning: Function parameter or member 'pnvme_fcreq' not described in 'lpfc_nvme_fcp_io_submit' drivers/scsi/lpfc/lpfc_nvme.c:1605: warning: Excess function parameter 'lpfc_pnvme' description in 'lpfc_nvme_fcp_io_submit' drivers/scsi/lpfc/lpfc_nvme.c:1605: warning: Excess function parameter 'lpfc_nvme_lport' description in 'lpfc_nvme_fcp_io_submit' drivers/scsi/lpfc/lpfc_nvme.c:1605: warning: Excess function parameter 'lpfc_nvme_rport' description in 'lpfc_nvme_fcp_io_submit' drivers/scsi/lpfc/lpfc_nvme.c:1605: warning: Excess function parameter 'lpfc_nvme_fcreq' description in 'lpfc_nvme_fcp_io_submit' drivers/scsi/lpfc/lpfc_nvme.c:1852: warning: Function parameter or member 'abts_cmpl' not described in 'lpfc_nvme_abort_fcreq_cmpl' drivers/scsi/lpfc/lpfc_nvme.c:1852: warning: Excess function parameter 'rspiocb' description in 'lpfc_nvme_abort_fcreq_cmpl' drivers/scsi/lpfc/lpfc_nvme.c:1888: warning: Function parameter or member 'pnvme_lport' not described in 'lpfc_nvme_fcp_abort' drivers/scsi/lpfc/lpfc_nvme.c:1888: warning: Function parameter or member 'pnvme_rport' not described in 'lpfc_nvme_fcp_abort' drivers/scsi/lpfc/lpfc_nvme.c:1888: warning: Function parameter or member 'pnvme_fcreq' not described in 'lpfc_nvme_fcp_abort' drivers/scsi/lpfc/lpfc_nvme.c:1888: warning: Excess function parameter 'lpfc_pnvme' description in 'lpfc_nvme_fcp_abort' drivers/scsi/lpfc/lpfc_nvme.c:1888: warning: Excess function parameter 'lpfc_nvme_lport' description in 'lpfc_nvme_fcp_abort' drivers/scsi/lpfc/lpfc_nvme.c:1888: warning: Excess function parameter 'lpfc_nvme_rport' description in 'lpfc_nvme_fcp_abort' drivers/scsi/lpfc/lpfc_nvme.c:1888: warning: Excess function parameter 'lpfc_nvme_fcreq' description in 'lpfc_nvme_fcp_abort' drivers/scsi/lpfc/lpfc_nvme.c:2089: warning: Function parameter or member 'ndlp' not described in 'lpfc_get_nvme_buf' drivers/scsi/lpfc/lpfc_nvme.c:2089: warning: Function parameter or member 'idx' not described in 'lpfc_get_nvme_buf' drivers/scsi/lpfc/lpfc_nvme.c:2089: warning: Function parameter or member 'expedite' not described in 'lpfc_get_nvme_buf' drivers/scsi/lpfc/lpfc_nvme.c:2193: warning: Function parameter or member 'vport' not described in 'lpfc_nvme_create_localport' drivers/scsi/lpfc/lpfc_nvme.c:2326: warning: Function parameter or member 'vport' not described in 'lpfc_nvme_destroy_localport' drivers/scsi/lpfc/lpfc_nvme.c:2326: warning: Excess function parameter 'pnvme' description in 'lpfc_nvme_destroy_localport' drivers/scsi/lpfc/lpfc_nvme.c:2544: warning: Function parameter or member 'vport' not described in 'lpfc_nvme_rescan_port' drivers/scsi/lpfc/lpfc_nvme.c:2544: warning: Function parameter or member 'ndlp' not described in 'lpfc_nvme_rescan_port'

Cc James Smart <[email protected]>
Cc Dick Kennedy <[email protected]>
---
 drivers/scsi/lpfc/lpfc_nvme.c | 35 +++++++++++++++--------------------
 1 file changed, 15 insertions(+), 20 deletions(-)
drivers/scsi/lpfc/lpfc_nvme.c +15 -20
index 33d007ca5c8e6..42eb144fed0d1 100644
@@ -235,7 +235,6 @@ lpfc_nvme_prep_abort_wqe(struct lpfc_iocbq *pwqeq, u16 xritag, u8 opt)
 /**
  * lpfc_nvme_create_queue -
  * @pnvme_lport: Transport localport that LS is to be issued from
- * @lpfc_pnvme: Pointer to the driver's nvme instance data
  * @qidx: An cpu index used to affinitize IO queues and MSIX vectors.
  * @qsize: Size of the queue in bytes
  * @handle: An opaque driver handle used in follow-up calls.
@@ -787,7 +786,7 @@ __lpfc_nvme_ls_req(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 /**
  * lpfc_nvme_ls_req - Issue an NVME Link Service request
  * @pnvme_lport: Transport localport that LS is to be issued from.
- * @nvme_rport: Transport remoteport that LS is to be sent to.
+ * @pnvme_rport: Transport remoteport that LS is to be sent to.
  * @pnvme_lsreq: the transport nvme_ls_req structure for the LS
  *
  * Driver registers this routine to handle any link service request
@@ -1290,7 +1289,7 @@ lpfc_nvme_io_cmd_wqe_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pwqeIn,
 /**
  * lpfc_nvme_prep_io_cmd - Issue an NVME-over-FCP IO
  * @vport: pointer to a host virtual N_Port data structure
- * @lpfcn_cmd: Pointer to lpfc scsi command
+ * @lpfc_ncmd: Pointer to lpfc scsi command
  * @pnode: pointer to a node-list data structure
  * @cstat: pointer to the control status structure
  *
@@ -1398,7 +1397,7 @@ lpfc_nvme_prep_io_cmd(struct lpfc_vport *vport,
 /**
  * lpfc_nvme_prep_io_dma - Issue an NVME-over-FCP IO
  * @vport: pointer to a host virtual N_Port data structure
- * @lpfcn_cmd: Pointer to lpfc scsi command
+ * @lpfc_ncmd: Pointer to lpfc scsi command
  *
  * Driver registers this routine as it io request handler.  This
  * routine issues an fcp WQE with data from the @lpfc_nvme_fcpreq
@@ -1580,16 +1579,14 @@ lpfc_nvme_prep_io_dma(struct lpfc_vport *vport,
 
 /**
  * lpfc_nvme_fcp_io_submit - Issue an NVME-over-FCP IO
- * @lpfc_pnvme: Pointer to the driver's nvme instance data
- * @lpfc_nvme_lport: Pointer to the driver's local port data
- * @lpfc_nvme_rport: Pointer to the rport getting the @lpfc_nvme_ereq
- * @lpfc_nvme_fcreq: IO request from nvme fc to driver.
+ * @pnvme_lport: Pointer to the driver's local port data
+ * @pnvme_rport: Pointer to the rport getting the @lpfc_nvme_ereq
  * @hw_queue_handle: Driver-returned handle in lpfc_nvme_create_queue
+ * @pnvme_fcreq: IO request from nvme fc to driver.
  *
  * Driver registers this routine as it io request handler.  This
  * routine issues an fcp WQE with data from the @lpfc_nvme_fcpreq
- * data structure to the rport
- indicated in @lpfc_nvme_rport.
+ * data structure to the rport indicated in @lpfc_nvme_rport.
  *
  * Return value :
  *   0 - Success
@@ -1837,7 +1834,7 @@ lpfc_nvme_fcp_io_submit(struct nvme_fc_local_port *pnvme_lport,
  * lpfc_nvme_abort_fcreq_cmpl - Complete an NVME FCP abort request.
  * @phba: Pointer to HBA context object
  * @cmdiocb: Pointer to command iocb object.
- * @rspiocb: Pointer to response iocb object.
+ * @abts_cmpl: Pointer to wcqe complete object.
  *
  * This is the callback function for any NVME FCP IO that was aborted.
  *
@@ -1863,11 +1860,10 @@ lpfc_nvme_abort_fcreq_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
 
 /**
  * lpfc_nvme_fcp_abort - Issue an NVME-over-FCP ABTS
- * @lpfc_pnvme: Pointer to the driver's nvme instance data
- * @lpfc_nvme_lport: Pointer to the driver's local port data
- * @lpfc_nvme_rport: Pointer to the rport getting the @lpfc_nvme_ereq
- * @lpfc_nvme_fcreq: IO request from nvme fc to driver.
+ * @pnvme_lport: Pointer to the driver's local port data
+ * @pnvme_rport: Pointer to the rport getting the @lpfc_nvme_ereq
  * @hw_queue_handle: Driver-returned handle in lpfc_nvme_create_queue
+ * @pnvme_fcreq: IO request from nvme fc to driver.
  *
  * Driver registers this routine as its nvme request io abort handler.  This
  * routine issues an fcp Abort WQE with data from the @lpfc_nvme_fcpreq
@@ -2070,9 +2066,8 @@ static struct nvme_fc_port_template lpfc_nvme_template = {
 	.fcprqst_priv_sz = sizeof(struct lpfc_nvme_fcpreq_priv),
 };
 
-/**
+/*
  * lpfc_get_nvme_buf - Get a nvme buffer from io_buf_list of the HBA
- * @phba: The HBA for which this call is being executed.
  *
  * This routine removes a nvme buffer from head of @hdwq io_buf_list
  * and returns to caller.
@@ -2172,7 +2167,7 @@ lpfc_release_nvme_buf(struct lpfc_hba *phba, struct lpfc_io_buf *lpfc_ncmd)
 
 /**
  * lpfc_nvme_create_localport - Create/Bind an nvme localport instance.
- * @pvport - the lpfc_vport instance requesting a localport.
+ * @vport - the lpfc_vport instance requesting a localport.
  *
  * This routine is invoked to create an nvme localport instance to bind
  * to the nvme_fc_transport.  It is called once during driver load
@@ -2319,7 +2314,7 @@ lpfc_nvme_lport_unreg_wait(struct lpfc_vport *vport,
 
 /**
  * lpfc_nvme_destroy_localport - Destroy lpfc_nvme bound to nvme transport.
- * @pnvme: pointer to lpfc nvme data structure.
+ * @vport: pointer to a host virtual N_Port data structure
  *
  * This routine is invoked to destroy all lports bound to the phba.
  * The lport memory was allocated by the nvme fc transport and is
@@ -2538,7 +2533,7 @@ lpfc_nvme_register_port(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
 #endif
 }
 
-/**
+/*
  * lpfc_nvme_rescan_port - Check to see if we should rescan this remoteport
  *
  * If the ndlp represents an NVME Target, that we are logged into,
Signature · 1 line
2.25.1
author
#13 lore raw

PATCH RESEND 13/19 scsi: esas2r: esas2r_int: Add brackets around potentially empty if()s

In reply to Lee Jones

Fixes the following W=1 kernel build warning(s):

drivers/scsi/esas2r/esas2r_int.c: In function ‘esas2r_doorbell_interrupt’:
drivers/scsi/esas2r/esas2r_int.c:692:22: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body] drivers/scsi/esas2r/esas2r_int.c: In function ‘esas2r_send_reset_ae’:
drivers/scsi/esas2r/esas2r_int.c:868:44: warning: suggest braces around empty body in an ‘else’ statement [-Wempty-body]

Cc Bradley Grove <[email protected]>
---
 drivers/scsi/esas2r/esas2r_int.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)
drivers/scsi/esas2r/esas2r_int.c +5 -3
index f16d6bcf9bb6d..5281d93563275 100644
@@ -688,8 +688,9 @@ static void esas2r_doorbell_interrupt(struct esas2r_adapter *a, u32 doorbell)
 		esas2r_local_reset_adapter(a);
 	}
 
-	if (!(doorbell & DRBL_FORCE_INT))
+	if (!(doorbell & DRBL_FORCE_INT)) {
 		esas2r_trace_exit();
+	}
 }
 
 void esas2r_force_interrupt(struct esas2r_adapter *a)
@@ -862,10 +863,11 @@ void esas2r_send_reset_ae(struct esas2r_adapter *a, bool pwr_mgt)
 	ae.byflags = 0;
 	ae.bylength = (u8)sizeof(struct atto_vda_ae_hdr);
 
-	if (pwr_mgt)
+	if (pwr_mgt) {
 		esas2r_hdebug("*** sending power management AE ***");
-	else
+	} else {
 		esas2r_hdebug("*** sending reset AE ***");
+	}
 
 	esas2r_queue_fw_event(a, fw_event_vda_ae, &ae,
 			      sizeof(union atto_vda_ae));
Signature · 1 line
2.25.1
author
#14 lore raw

PATCH RESEND 14/19 scsi: lpfc: lpfc_nvmet: Fix-up some formatting and doc-rot issues

In reply to Lee Jones

Fixes the following W=1 kernel build warning(s):

drivers/scsi/lpfc/lpfc_nvmet.c:386: warning: Function parameter or member 'ctx_buf' not described in 'lpfc_nvmet_ctxbuf_post' drivers/scsi/lpfc/lpfc_nvmet.c:386: warning: Excess function parameter 'ctxp' description in 'lpfc_nvmet_ctxbuf_post' drivers/scsi/lpfc/lpfc_nvmet.c:386: warning: Excess function parameter 'mp' description in 'lpfc_nvmet_ctxbuf_post' drivers/scsi/lpfc/lpfc_nvmet.c:1310: warning: Function parameter or member 'targetport' not described in 'lpfc_nvmet_ls_req' drivers/scsi/lpfc/lpfc_nvmet.c:1310: warning: Function parameter or member 'hosthandle' not described in 'lpfc_nvmet_ls_req' drivers/scsi/lpfc/lpfc_nvmet.c:1310: warning: Function parameter or member 'pnvme_lsreq' not described in 'lpfc_nvmet_ls_req' drivers/scsi/lpfc/lpfc_nvmet.c:1350: warning: Function parameter or member 'hosthandle' not described in 'lpfc_nvmet_ls_abort' drivers/scsi/lpfc/lpfc_nvmet.c:1350: warning: Function parameter or member 'pnvme_lsreq' not described in 'lpfc_nvmet_ls_abort' drivers/scsi/lpfc/lpfc_nvmet.c:3607: warning: Function parameter or member 'phba' not described in 'lpfc_nvmet_invalidate_host' drivers/scsi/lpfc/lpfc_nvmet.c:3607: warning: Function parameter or member 'ndlp' not described in 'lpfc_nvmet_invalidate_host'

Cc James Smart <[email protected]>
Cc Dick Kennedy <[email protected]>
---
 drivers/scsi/lpfc/lpfc_nvmet.c | 17 ++++++++---------
 1 file changed, 8 insertions(+), 9 deletions(-)
drivers/scsi/lpfc/lpfc_nvmet.c +8 -9
index d4ade7cdb93a9..675253093e877 100644
@@ -371,8 +371,7 @@ lpfc_nvmet_xmt_ls_rsp_cmp(struct lpfc_hba *phba, struct lpfc_iocbq *cmdwqe,
 /**
  * lpfc_nvmet_ctxbuf_post - Repost a NVMET RQ DMA buffer and clean up context
  * @phba: HBA buffer is associated with
- * @ctxp: context to clean up
- * @mp: Buffer to free
+ * @ctx_buf: ctx buffer context
  *
  * Description: Frees the given DMA buffer in the appropriate way given by
  * reposting it to its associated RQ so it can be reused.
@@ -1291,10 +1290,10 @@ lpfc_nvmet_ls_req_cmp(struct lpfc_hba *phba, struct lpfc_iocbq *cmdwqe,
 
 /**
  * lpfc_nvmet_ls_req - Issue an Link Service request
- * @targetport - pointer to target instance registered with nvmet transport.
- * @hosthandle - hosthandle set by the driver in a prior ls_rqst_rcv.
+ * @targetport: pointer to target instance registered with nvmet transport.
+ * @hosthandle: hosthandle set by the driver in a prior ls_rqst_rcv.
  *               Driver sets this value to the ndlp pointer.
- * @pnvme_lsreq - the transport nvme_ls_req structure for the LS
+ * @pnvme_lsreq: the transport nvme_ls_req structure for the LS
  *
  * Driver registers this routine to handle any link service request
  * from the nvme_fc transport to a remote nvme-aware port.
@@ -1336,9 +1335,9 @@ lpfc_nvmet_ls_req(struct nvmet_fc_target_port *targetport,
 /**
  * lpfc_nvmet_ls_abort - Abort a prior NVME LS request
  * @targetport: Transport targetport, that LS was issued from.
- * @hosthandle - hosthandle set by the driver in a prior ls_rqst_rcv.
+ * @hosthandle: hosthandle set by the driver in a prior ls_rqst_rcv.
  *               Driver sets this value to the ndlp pointer.
- * @pnvme_lsreq - the transport nvme_ls_req structure for LS to be aborted
+ * @pnvme_lsreq: the transport nvme_ls_req structure for LS to be aborted
  *
  * Driver registers this routine to abort an NVME LS request that is
  * in progress (from the transports perspective).
@@ -3596,8 +3595,8 @@ lpfc_nvme_unsol_ls_issue_abort(struct lpfc_hba *phba,
 /**
  * lpfc_nvmet_invalidate_host
  *
- * @phba - pointer to the driver instance bound to an adapter port.
- * @ndlp - pointer to an lpfc_nodelist type
+ * @phba: pointer to the driver instance bound to an adapter port.
+ * @ndlp: pointer to an lpfc_nodelist type
  *
  * This routine upcalls the nvmet transport to invalidate an NVME
  * host to which this target instance had active connections.
Signature · 1 line
2.25.1
author
#15 lore raw

PATCH RESEND 15/19 scsi: esas2r: esas2r_main: Demote non-conformant kernel-doc header

In reply to Lee Jones

Fixes the following W=1 kernel build warning(s):

drivers/scsi/esas2r/esas2r_main.c:911: warning: Function parameter or member 'a' not described in 'esas2r_check_active_queue' drivers/scsi/esas2r/esas2r_main.c:911: warning: Function parameter or member 'abort_request' not described in 'esas2r_check_active_queue' drivers/scsi/esas2r/esas2r_main.c:911: warning: Function parameter or member 'cmd' not described in 'esas2r_check_active_queue' drivers/scsi/esas2r/esas2r_main.c:911: warning: Function parameter or member 'queue' not described in 'esas2r_check_active_queue'

Cc Bradley Grove <[email protected]>
---
 drivers/scsi/esas2r/esas2r_main.c | 8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)
drivers/scsi/esas2r/esas2r_main.c +2 -6
index 7b49e2e9fcdec..923e6e5ddbf90 100644
@@ -894,15 +894,11 @@ static void complete_task_management_request(struct esas2r_adapter *a,
 	esas2r_free_request(a, rq);
 }
 
-/**
+/*
  * Searches the specified queue for the specified queue for the command
  * to abort.
  *
- * @param [in] a
- * @param [in] abort_request
- * @param [in] cmd
- * t
- * @return 0 on failure, 1 if command was not found, 2 if command was found
+ * Return 0 on failure, 1 if command was not found, 2 if command was found
  */
 static int esas2r_check_active_queue(struct esas2r_adapter *a,
 				     struct esas2r_request **abort_request,
Signature · 1 line
2.25.1
author
#16 lore raw

PATCH RESEND 16/19 scsi: advansys: Relocate or remove unused variables

In reply to Lee Jones

Fixes the following W=1 kernel build warning(s):

drivers/scsi/advansys.c: In function ‘asc_prt_asc_board_eeprom’:
drivers/scsi/advansys.c:2879:15: warning: variable ‘asc_dvc_varp’ set but not used [-Wunused-but-set-variable] drivers/scsi/advansys.c: In function ‘asc_prt_driver_conf’:
drivers/scsi/advansys.c:3174:6: warning: variable ‘chip_scsi_id’ set but not used [-Wunused-but-set-variable] drivers/scsi/advansys.c: In function ‘AdvISR’:
drivers/scsi/advansys.c:6114:9: warning: variable ‘target_bit’ set but not used [-Wunused-but-set-variable]

Cc Matthew Wilcox <[email protected]>
Cc Hannes Reinecke <[email protected]>
---
 drivers/scsi/advansys.c | 16 +++-------------
 1 file changed, 3 insertions(+), 13 deletions(-)
drivers/scsi/advansys.c +3 -13
index c2c7850ff7b42..79830e77afa97 100644
@@ -2876,15 +2876,15 @@ static int asc_get_eeprom_string(ushort *serialnum, uchar *cp)
 static void asc_prt_asc_board_eeprom(struct seq_file *m, struct Scsi_Host *shost)
 {
 	struct asc_board *boardp = shost_priv(shost);
-	ASC_DVC_VAR *asc_dvc_varp;
 	ASCEEP_CONFIG *ep;
 	int i;
+	uchar serialstr[13];
 #ifdef CONFIG_ISA
+	ASC_DVC_VAR *asc_dvc_varp;
 	int isa_dma_speed[] = { 10, 8, 7, 6, 5, 4, 3, 2 };
-#endif /* CONFIG_ISA */
-	uchar serialstr[13];
 
 	asc_dvc_varp = &boardp->dvc_var.asc_dvc_var;
+#endif /* CONFIG_ISA */
 	ep = &boardp->eep_config.asc_eep;
 
 	seq_printf(m,
@@ -3171,7 +3171,6 @@ static void asc_prt_adv_board_eeprom(struct seq_file *m, struct Scsi_Host *shost
 static void asc_prt_driver_conf(struct seq_file *m, struct Scsi_Host *shost)
 {
 	struct asc_board *boardp = shost_priv(shost);
-	int chip_scsi_id;
 
 	seq_printf(m,
 		"\nLinux Driver Configuration and Information for AdvanSys SCSI Host %d:\n",
@@ -3197,12 +3196,6 @@ static void asc_prt_driver_conf(struct seq_file *m, struct Scsi_Host *shost)
 		   boardp->asc_n_io_port);
 
 	seq_printf(m, " io_port 0x%lx\n", shost->io_port);
-
-	if (ASC_NARROW_BOARD(boardp)) {
-		chip_scsi_id = boardp->dvc_cfg.asc_dvc_cfg.chip_scsi_id;
-	} else {
-		chip_scsi_id = boardp->dvc_var.adv_dvc_var.chip_scsi_id;
-	}
 }
 
 /*
@@ -6111,7 +6104,6 @@ static int AdvISR(ADV_DVC_VAR *asc_dvc)
 {
 	AdvPortAddr iop_base;
 	uchar int_stat;
-	ushort target_bit;
 	ADV_CARR_T *free_carrp;
 	__le32 irq_next_vpa;
 	ADV_SCSI_REQ_Q *scsiq;
@@ -6198,8 +6190,6 @@ static int AdvISR(ADV_DVC_VAR *asc_dvc)
 		asc_dvc->carr_freelist = free_carrp;
 		asc_dvc->carr_pending_cnt--;
 
-		target_bit = ADV_TID_TO_TIDMASK(scsiq->target_id);
-
 		/*
 		 * Clear request microcode control flag.
 		 */
Signature · 1 line
2.25.1
author
#17 lore raw

PATCH RESEND 17/19 scsi: dc395x: Remove a few unused variables

In reply to Lee Jones

Fixes the following W=1 kernel build warning(s):

drivers/scsi/dc395x.c: In function ‘data_io_transfer’:
drivers/scsi/dc395x.c:2400:16: warning: variable ‘data2’ set but not used [-Wunused-but-set-variable] drivers/scsi/dc395x.c:2400:6: warning: variable ‘data’ set but not used [-Wunused-but-set-variable] drivers/scsi/dc395x.c: In function ‘reselect’:
drivers/scsi/dc395x.c:2992:5: warning: variable ‘arblostflag’ set but not used [-Wunused-but-set-variable] drivers/scsi/dc395x.c: In function ‘doing_srb_done’:
drivers/scsi/dc395x.c:3393:28: warning: variable ‘dir’ set but not used [-Wunused-but-set-variable]

Cc Oliver Neukum <[email protected]>
Cc Ali Akcaagac <[email protected]>
Cc Jamie Lenehan <[email protected]>
Cc "C.L. Huang" <[email protected]>
Cc Erich Chen <[email protected]>
Cc Kurt Garloff <[email protected]>
---
 drivers/scsi/dc395x.c | 13 ++++---------
 1 file changed, 4 insertions(+), 9 deletions(-)
drivers/scsi/dc395x.c +4 -9
index fa16894d8758c..f838fe8d74578 100644
@@ -2397,7 +2397,6 @@ static void data_io_transfer(struct AdapterCtlBlk *acb,
 	}
 #endif				/* DC395x_LASTPIO */
 	else {		/* xfer pad */
-		u8 data = 0, data2 = 0;
 		if (srb->sg_count) {
 			srb->adapter_status = H_OVER_UNDER_RUN;
 			srb->status |= OVER_RUN;
@@ -2412,8 +2411,8 @@ static void data_io_transfer(struct AdapterCtlBlk *acb,
 			DC395x_write8(acb, TRM_S1040_SCSI_CONFIG2,
 				      CFG2_WIDEFIFO);
 			if (io_dir & DMACMD_DIR) {
-				data = DC395x_read8(acb, TRM_S1040_SCSI_FIFO);
-				data2 = DC395x_read8(acb, TRM_S1040_SCSI_FIFO);
+				DC395x_read8(acb, TRM_S1040_SCSI_FIFO);
+				DC395x_read8(acb, TRM_S1040_SCSI_FIFO);
 			} else {
 				/* Danger, Robinson: If you find KGs
 				 * scattered over the wide disk, the driver
@@ -2427,7 +2426,7 @@ static void data_io_transfer(struct AdapterCtlBlk *acb,
 			/* Danger, Robinson: If you find a collection of Ks on your disk
 			 * something broke :-( */
 			if (io_dir & DMACMD_DIR)
-				data = DC395x_read8(acb, TRM_S1040_SCSI_FIFO);
+				DC395x_read8(acb, TRM_S1040_SCSI_FIFO);
 			else
 				DC395x_write8(acb, TRM_S1040_SCSI_FIFO, 'K');
 		}
@@ -2989,7 +2988,6 @@ static void reselect(struct AdapterCtlBlk *acb)
 	struct ScsiReqBlk *srb = NULL;
 	u16 rsel_tar_lun_id;
 	u8 id, lun;
-	u8 arblostflag = 0;
 	dprintkdbg(DBG_0, "reselect: acb=%p\n", acb);
 
 	clear_fifo(acb, "reselect");
@@ -3011,7 +3009,6 @@ static void reselect(struct AdapterCtlBlk *acb)
 				srb->cmd, dcb->target_id,
 				dcb->target_lun, rsel_tar_lun_id,
 				DC395x_read16(acb, TRM_S1040_SCSI_STATUS));
-			arblostflag = 1;
 			/*srb->state |= SRB_DISCONNECT; */
 
 			srb->state = SRB_READY;
@@ -3042,7 +3039,7 @@ static void reselect(struct AdapterCtlBlk *acb)
 			"disconnection? <%02i-%i>\n",
 			dcb->target_id, dcb->target_lun);
 
-	if (dcb->sync_mode & EN_TAG_QUEUEING /*&& !arblostflag */) {
+	if (dcb->sync_mode & EN_TAG_QUEUEING) {
 		srb = acb->tmp_srb;
 		dcb->active_srb = srb;
 	} else {
@@ -3390,11 +3387,9 @@ static void doing_srb_done(struct AdapterCtlBlk *acb, u8 did_flag,
 		struct scsi_cmnd *p;
 
 		list_for_each_entry_safe(srb, tmp, &dcb->srb_going_list, list) {
-			enum dma_data_direction dir;
 			int result;
 
 			p = srb->cmd;
-			dir = p->sc_data_direction;
 			result = MK_RES(0, did_flag, 0, 0);
 			printk("G:%p(%02i-%i) ", p,
 			       p->device->id, (u8)p->device->lun);
Signature · 1 line
2.25.1
author
#18 lore raw

PATCH RESEND 18/19 scsi: dc395x: Mark 's_stat2' as __maybe_unused

In reply to Lee Jones

It's only utilised when debugging is enabled.

Fixes the following W=1 kernel build warning(s):

drivers/scsi/dc395x.c: In function ‘start_scsi’:
drivers/scsi/dc395x.c:1359:6: warning: variable ‘s_stat2’ set but not used [-Wunused-but-set-variable]

Cc Oliver Neukum <[email protected]>
Cc Ali Akcaagac <[email protected]>
Cc Jamie Lenehan <[email protected]>
Cc "C.L. Huang" <[email protected]>
Cc Erich Chen <[email protected]>
Cc Kurt Garloff <[email protected]>
---
 drivers/scsi/dc395x.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/scsi/dc395x.c +1 -1
index f838fe8d74578..7b522ff345d5e 100644
@@ -1356,7 +1356,7 @@ void selection_timeout_missed(unsigned long ptr)
 static u8 start_scsi(struct AdapterCtlBlk* acb, struct DeviceCtlBlk* dcb,
 		struct ScsiReqBlk* srb)
 {
-	u16 s_stat2, return_code;
+	u16 __maybe_unused s_stat2, return_code;
 	u8 s_stat, scsicommand, i, identify_message;
 	u8 *ptr;
 	dprintkdbg(DBG_0, "start_scsi: (0x%p) <%02i-%i> srb=%p\n",
Signature · 1 line
2.25.1
author
#19 lore raw

PATCH RESEND 19/19 scsi: hpsa: Strip out a bunch of set but unused variables

In reply to Lee Jones

Fixes the following W=1 kernel build warning(s):

drivers/scsi/hpsa.c: In function ‘hpsa_volume_offline’:
drivers/scsi/hpsa.c:3885:5: warning: variable ‘scsi_status’ set but not used [-Wunused-but-set-variable] drivers/scsi/hpsa.c:3884:6: warning: variable ‘cmd_status’ set but not used [-Wunused-but-set-variable] drivers/scsi/hpsa.c: In function ‘hpsa_update_scsi_devices’:
drivers/scsi/hpsa.c:4354:9: warning: variable ‘n_ext_target_devs’ set but not used [-Wunused-but-set-variable] drivers/scsi/hpsa.c: In function ‘hpsa_scatter_gather’:
drivers/scsi/hpsa.c:4583:36: warning: variable ‘last_sg’ set but not used [-Wunused-but-set-variable] drivers/scsi/hpsa.c: In function ‘hpsa_init_one’:
drivers/scsi/hpsa.c:8639:6: warning: variable ‘dac’ set but not used [-Wunused-but-set-variable] drivers/scsi/hpsa.c: In function ‘hpsa_enter_performant_mode’:
drivers/scsi/hpsa.c:9300:7: warning: variable ‘rc’ set but not used [-Wunused-but-set-variable]

---
 drivers/scsi/hpsa.c | 25 +++++++------------------
 1 file changed, 7 insertions(+), 18 deletions(-)
drivers/scsi/hpsa.c +7 -18
index 16fd378285d27..02e20bed8a484 100644
@@ -3881,8 +3881,6 @@ static unsigned char hpsa_volume_offline(struct ctlr_info *h,
 	u8 sense_key, asc, ascq;
 	int sense_len;
 	int rc, ldstat = 0;
-	u16 cmd_status;
-	u8 scsi_status;
 #define ASC_LUN_NOT_READY 0x04
 #define ASCQ_LUN_NOT_READY_FORMAT_IN_PROGRESS 0x04
 #define ASCQ_LUN_NOT_READY_INITIALIZING_CMD_REQ 0x02
@@ -3902,8 +3900,6 @@ static unsigned char hpsa_volume_offline(struct ctlr_info *h,
 	else
 		sense_len = c->err_info->SenseLen;
 	decode_sense_data(sense, sense_len, &sense_key, &asc, &ascq);
-	cmd_status = c->err_info->CommandStatus;
-	scsi_status = c->err_info->ScsiStatus;
 	cmd_free(h, c);
 
 	/* Determine the reason for not ready state */
@@ -4351,7 +4347,7 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h)
 	u32 ndev_allocated = 0;
 	struct hpsa_scsi_dev_t **currentsd, *this_device, *tmpdevice;
 	int ncurrent = 0;
-	int i, n_ext_target_devs, ndevs_to_allocate;
+	int i, ndevs_to_allocate;
 	int raid_ctlr_position;
 	bool physical_device;
 	DECLARE_BITMAP(lunzerobits, MAX_EXT_TARGETS);
@@ -4416,7 +4412,6 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h)
 		raid_ctlr_position = nphysicals + nlogicals;
 
 	/* adjust our table of devices */
-	n_ext_target_devs = 0;
 	for (i = 0; i < nphysicals + nlogicals + 1; i++) {
 		u8 *lunaddrbytes, is_OBDR = 0;
 		int rc = 0;
@@ -4580,7 +4575,7 @@ static int hpsa_scatter_gather(struct ctlr_info *h,
 		struct scsi_cmnd *cmd)
 {
 	struct scatterlist *sg;
-	int use_sg, i, sg_limit, chained, last_sg;
+	int use_sg, i, sg_limit, chained;
 	struct SGDescriptor *curr_sg;
 
 	BUG_ON(scsi_sg_count(cmd) > h->maxsgentries);
@@ -4602,7 +4597,6 @@ static int hpsa_scatter_gather(struct ctlr_info *h,
 	curr_sg = cp->SG;
 	chained = use_sg > h->max_cmd_sg_entries;
 	sg_limit = chained ? h->max_cmd_sg_entries - 1 : use_sg;
-	last_sg = scsi_sg_count(cmd) - 1;
 	scsi_for_each_sg(cmd, sg, sg_limit, i) {
 		hpsa_set_sg_descriptor(curr_sg, sg);
 		curr_sg++;
@@ -8635,7 +8629,7 @@ static struct ctlr_info *hpda_alloc_ctlr_info(void)
 
 static int hpsa_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 {
-	int dac, rc;
+	int rc;
 	struct ctlr_info *h;
 	int try_soft_reset = 0;
 	unsigned long flags;
@@ -8711,13 +8705,9 @@ static int hpsa_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	/* configure PCI DMA stuff */
 	rc = dma_set_mask(&pdev->dev, DMA_BIT_MASK(64));
-	if (rc == 0) {
-		dac = 1;
-	} else {
+	if (rc != 0)
 		rc = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
-		if (rc == 0) {
-			dac = 0;
-		} else {
+		if (rc != 0) {
 			dev_err(&pdev->dev, "no suitable DMA available\n");
 			goto clean3;	/* shost, pci, lu, aer/h */
 		}
@@ -9298,10 +9288,9 @@ static int hpsa_enter_performant_mode(struct ctlr_info *h, u32 trans_support)
 	} else if (trans_support & CFGTBL_Trans_io_accel2) {
 		u64 cfg_offset, cfg_base_addr_index;
 		u32 bft2_offset, cfg_base_addr;
-		int rc;
 
-		rc = hpsa_find_cfg_addrs(h->pdev, h->vaddr, &cfg_base_addr,
-			&cfg_base_addr_index, &cfg_offset);
+		hpsa_find_cfg_addrs(h->pdev, h->vaddr, &cfg_base_addr,
+				    &cfg_base_addr_index, &cfg_offset);
 		BUILD_BUG_ON(offsetof(struct io_accel2_cmd, sg) != 64);
 		bft2[15] = h->ioaccel_maxsg + HPSA_IOACCEL2_HEADER_SZ;
 		calc_bucket_map(bft2, ARRAY_SIZE(bft2), h->ioaccel_maxsg,
Signature · 1 line
2.25.1
#20 lore raw

Re: [RESEND 19/19] scsi: hpsa: Strip out a bunch of set but unused variables

I love your patch! Perhaps something to improve:

Hi Lee,

I love your patch! Perhaps something to improve:

[auto build test WARNING on mkp-scsi/for-next]
[also build test WARNING on scsi/for-next linus/master v5.10-rc2 next-20201103] [cannot apply to linux/master]
[If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]

url:    https://github.com/0day-ci/linux/commits/Lee-Jones/Rid-W-1-warnings-in-SCSI/20201102-222943
base:   https://git.kernel.org/pub/scm/linux/kernel/git/mkp/scsi.git for-next
config: s390-randconfig-r015-20201103 (attached as .config)
compiler: clang version 12.0.0 (https://github.com/llvm/llvm-project 1fcd5d5655e29f85e12b402e32974f207cfedf32)

reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross
# install s390 cross compiling tool for clang build
# apt-get install binutils-s390x-linux-gnu
# https://github.com/0day-ci/linux/commit/072f10ed00f6c539280c1143a76e724bd7618c22
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review Lee-Jones/Rid-W-1-warnings-in-SCSI/20201102-222943 git checkout 072f10ed00f6c539280c1143a76e724bd7618c22
# save the attached .config to linux build tree
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross ARCH=s390

If you fix the issue, kindly add following tag as appropriate

All warnings (new ones prefixed by >>):

   #define __le32_to_cpu(x) __swab32((__force __u32)(__le32)(x))
                                                             ^
   include/uapi/linux/swab.h:119:21: note: expanded from macro '__swab32'
           ___constant_swab32(x) :                 \
                              ^
   include/uapi/linux/swab.h:19:12: note: expanded from macro '___constant_swab32'
           (((__u32)(x) & (__u32)0x000000ffUL) << 24) |            \
                     ^
   In file included from drivers/scsi/hpsa.c:24:
   In file included from include/linux/pci.h:39:
   In file included from include/linux/io.h:13:
   In file included from arch/s390/include/asm/io.h:80:
   include/asm-generic/io.h:490:61: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
           val = __le32_to_cpu((__le32 __force)__raw_readl(PCI_IOBASE + addr));
                                                           ~~~~~~~~~~ ^
   include/uapi/linux/byteorder/big_endian.h:34:59: note: expanded from macro '__le32_to_cpu'
   #define __le32_to_cpu(x) __swab32((__force __u32)(__le32)(x))
                                                             ^
   include/uapi/linux/swab.h:119:21: note: expanded from macro '__swab32'
           ___constant_swab32(x) :                 \
                              ^
   include/uapi/linux/swab.h:20:12: note: expanded from macro '___constant_swab32'
           (((__u32)(x) & (__u32)0x0000ff00UL) <<  8) |            \
                     ^
   In file included from drivers/scsi/hpsa.c:24:
   In file included from include/linux/pci.h:39:
   In file included from include/linux/io.h:13:
   In file included from arch/s390/include/asm/io.h:80:
   include/asm-generic/io.h:490:61: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
           val = __le32_to_cpu((__le32 __force)__raw_readl(PCI_IOBASE + addr));
                                                           ~~~~~~~~~~ ^
   include/uapi/linux/byteorder/big_endian.h:34:59: note: expanded from macro '__le32_to_cpu'
   #define __le32_to_cpu(x) __swab32((__force __u32)(__le32)(x))
                                                             ^
   include/uapi/linux/swab.h:119:21: note: expanded from macro '__swab32'
           ___constant_swab32(x) :                 \
                              ^
   include/uapi/linux/swab.h:21:12: note: expanded from macro '___constant_swab32'
           (((__u32)(x) & (__u32)0x00ff0000UL) >>  8) |            \
                     ^
   In file included from drivers/scsi/hpsa.c:24:
   In file included from include/linux/pci.h:39:
   In file included from include/linux/io.h:13:
   In file included from arch/s390/include/asm/io.h:80:
   include/asm-generic/io.h:490:61: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
           val = __le32_to_cpu((__le32 __force)__raw_readl(PCI_IOBASE + addr));
                                                           ~~~~~~~~~~ ^
   include/uapi/linux/byteorder/big_endian.h:34:59: note: expanded from macro '__le32_to_cpu'
   #define __le32_to_cpu(x) __swab32((__force __u32)(__le32)(x))
                                                             ^
   include/uapi/linux/swab.h:119:21: note: expanded from macro '__swab32'
           ___constant_swab32(x) :                 \
                              ^
   include/uapi/linux/swab.h:22:12: note: expanded from macro '___constant_swab32'
           (((__u32)(x) & (__u32)0xff000000UL) >> 24)))
                     ^
   In file included from drivers/scsi/hpsa.c:24:
   In file included from include/linux/pci.h:39:
   In file included from include/linux/io.h:13:
   In file included from arch/s390/include/asm/io.h:80:
   include/asm-generic/io.h:490:61: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
           val = __le32_to_cpu((__le32 __force)__raw_readl(PCI_IOBASE + addr));
                                                           ~~~~~~~~~~ ^
   include/uapi/linux/byteorder/big_endian.h:34:59: note: expanded from macro '__le32_to_cpu'
   #define __le32_to_cpu(x) __swab32((__force __u32)(__le32)(x))
                                                             ^
   include/uapi/linux/swab.h:120:12: note: expanded from macro '__swab32'
           __fswab32(x))
                     ^
   In file included from drivers/scsi/hpsa.c:24:
   In file included from include/linux/pci.h:39:
   In file included from include/linux/io.h:13:
   In file included from arch/s390/include/asm/io.h:80:
   include/asm-generic/io.h:501:33: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
           __raw_writeb(value, PCI_IOBASE + addr);
                               ~~~~~~~~~~ ^
   include/asm-generic/io.h:511:59: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
           __raw_writew((u16 __force)cpu_to_le16(value), PCI_IOBASE + addr);
                                                         ~~~~~~~~~~ ^
   include/asm-generic/io.h:521:59: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
           __raw_writel((u32 __force)cpu_to_le32(value), PCI_IOBASE + addr);
                                                         ~~~~~~~~~~ ^
   include/asm-generic/io.h:609:20: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
           readsb(PCI_IOBASE + addr, buffer, count);
                  ~~~~~~~~~~ ^
   include/asm-generic/io.h:617:20: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
           readsw(PCI_IOBASE + addr, buffer, count);
                  ~~~~~~~~~~ ^
   include/asm-generic/io.h:625:20: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
           readsl(PCI_IOBASE + addr, buffer, count);
                  ~~~~~~~~~~ ^
   include/asm-generic/io.h:634:21: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
           writesb(PCI_IOBASE + addr, buffer, count);
                   ~~~~~~~~~~ ^
   include/asm-generic/io.h:643:21: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
           writesw(PCI_IOBASE + addr, buffer, count);
                   ~~~~~~~~~~ ^
   include/asm-generic/io.h:652:21: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
           writesl(PCI_IOBASE + addr, buffer, count);
                   ~~~~~~~~~~ ^
>> drivers/scsi/hpsa.c:8710:3: warning: misleading indentation; statement is not part of the previous 'if' [-Wmisleading-indentation]
                   if (rc != 0) {
                   ^
   drivers/scsi/hpsa.c:8708:2: note: previous statement is here
           if (rc != 0)
           ^
   drivers/scsi/hpsa.c:8635:16: warning: unused variable 'flags' [-Wunused-variable]
           unsigned long flags;
                         ^
   drivers/scsi/hpsa.c:8712:9: error: use of undeclared label 'clean3'
                           goto clean3;    /* shost, pci, lu, aer/h */
                                ^
   drivers/scsi/hpsa.c:8688:8: error: use of undeclared label 'clean1'
                   goto clean1;    /* aer/h */
                        ^
   drivers/scsi/hpsa.c:8700:8: error: use of undeclared label 'clean2_5'
                   goto clean2_5;  /* pci, lu, aer/h */
                        ^
   drivers/scsi/hpsa.c:8694:8: error: use of undeclared label 'clean2'
                   goto clean2;    /* lu, aer/h */
                        ^
   drivers/scsi/hpsa.c:8707:32: warning: shift count >= width of type [-Wshift-count-overflow]
           rc = dma_set_mask(&pdev->dev, DMA_BIT_MASK(64));
                                         ^~~~~~~~~~~~~~~~
   include/linux/dma-mapping.h:76:54: note: expanded from macro 'DMA_BIT_MASK'
   #define DMA_BIT_MASK(n) (((n) == 64) ? ~0ULL : ((1ULL<<(n))-1))
                                                        ^ ~~~
   drivers/scsi/hpsa.c:8717:2: error: unknown type name 'h'
           h->access.set_intr_mask(h, HPSA_INTR_OFF);
           ^
   drivers/scsi/hpsa.c:8717:3: error: expected identifier or '('
           h->access.set_intr_mask(h, HPSA_INTR_OFF);
            ^
>> drivers/scsi/hpsa.c:8719:2: warning: declaration specifier missing, defaulting to 'int'
           rc = hpsa_request_irqs(h, do_hpsa_intr_msi, do_hpsa_intr_intx);
           ^
           int
   drivers/scsi/hpsa.c:8719:25: error: use of undeclared identifier 'h'
           rc = hpsa_request_irqs(h, do_hpsa_intr_msi, do_hpsa_intr_intx);
                                  ^
   drivers/scsi/hpsa.c:8720:2: error: expected identifier or '('
           if (rc)
           ^
   drivers/scsi/hpsa.c:8722:2: warning: declaration specifier missing, defaulting to 'int'
           rc = hpsa_alloc_cmd_pool(h);
           ^
           int
   drivers/scsi/hpsa.c:8722:27: error: use of undeclared identifier 'h'
           rc = hpsa_alloc_cmd_pool(h);
                                    ^
   drivers/scsi/hpsa.c:8723:2: error: expected identifier or '('
           if (rc)
           ^
   drivers/scsi/hpsa.c:8725:2: warning: declaration specifier missing, defaulting to 'int'
           rc = hpsa_alloc_sg_chain_blocks(h);
           ^
           int
   drivers/scsi/hpsa.c:8725:34: error: use of undeclared identifier 'h'
           rc = hpsa_alloc_sg_chain_blocks(h);
                                           ^
   drivers/scsi/hpsa.c:8726:2: error: expected identifier or '('
           if (rc)
           ^
   drivers/scsi/hpsa.c:8728:2: error: expected identifier or '('
           init_waitqueue_head(&h->scan_wait_queue);
           ^
   include/linux/wait.h:66:2: note: expanded from macro 'init_waitqueue_head'
           do {                                                                    \
           ^
   drivers/scsi/hpsa.c:8728:2: error: expected identifier or '('
   include/linux/wait.h:70:4: note: expanded from macro 'init_waitqueue_head'
           } while (0)
             ^
   drivers/scsi/hpsa.c:8729:2: error: expected identifier or '('
           init_waitqueue_head(&h->event_sync_wait_queue);
           ^
   include/linux/wait.h:66:2: note: expanded from macro 'init_waitqueue_head'
           do {                                                                    \
           ^
   drivers/scsi/hpsa.c:8729:2: error: expected identifier or '('
   include/linux/wait.h:70:4: note: expanded from macro 'init_waitqueue_head'
           } while (0)
             ^
   drivers/scsi/hpsa.c:8730:2: error: expected identifier or '('
           mutex_init(&h->reset_mutex);
           ^
   include/linux/mutex.h:115:32: note: expanded from macro 'mutex_init'
   #define mutex_init(mutex)                                               \
                                                                           ^
   drivers/scsi/hpsa.c:8730:2: error: expected identifier or '('
   include/linux/mutex.h:120:3: note: expanded from macro 'mutex_init'
   } while (0)
     ^
   drivers/scsi/hpsa.c:8731:2: error: unknown type name 'h'
           h->scan_finished = 1; /* no scan currently in progress */
           ^

fatal error: too many errors emitted, stopping now [-ferror-limit=] 26 warnings and 20 errors generated.

vim +/if +8710 drivers/scsi/hpsa.c

8629
8630 static int hpsa_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
8631 {
8632 int rc;
8633 struct ctlr_info *h;
8634 int try_soft_reset = 0;
8635 unsigned long flags;
8636 u32 board_id;
8637
8638 if (number_of_controllers == 0)
8639 printk(KERN_INFO DRIVER_NAME "\n");
8640
8641 rc = hpsa_lookup_board_id(pdev, &board_id, NULL);
8642 if (rc < 0) {
8643 dev_warn(&pdev->dev, "Board ID not found\n");
8644 return rc;
8645 }
8646
8647 rc = hpsa_init_reset_devices(pdev, board_id);
8648 if (rc) {
8649 if (rc != -ENOTSUPP)
8650 return rc;
8651 /* If the reset fails in a particular way (it has no way to do
8652 * a proper hard reset, so returns -ENOTSUPP) we can try to do
8653 * a soft reset once we get the controller configured up to the
8654 * point that it can accept a command.
8655 */
8656 try_soft_reset = 1;
8657 rc = 0;
8658 }
8659
8660 reinit_after_soft_reset:
8661
8662 /* Command structures must be aligned on a 32-byte boundary because
8663 * the 5 lower bits of the address are used by the hardware. and by
8664 * the driver. See comments in hpsa.h for more info.
8665 */
8666 BUILD_BUG_ON(sizeof(struct CommandList) % COMMANDLIST_ALIGNMENT);
8667 h = hpda_alloc_ctlr_info();
8668 if (!h) {
8669 dev_err(&pdev->dev, "Failed to allocate controller head\n");
8670 return -ENOMEM;
8671 }
8672
8673 h->pdev = pdev;
8674
8675 h->intr_mode = hpsa_simple_mode ? SIMPLE_MODE_INT : PERF_MODE_INT;
8676 INIT_LIST_HEAD(&h->offline_device_list);
8677 spin_lock_init(&h->lock);
8678 spin_lock_init(&h->offline_device_lock);
8679 spin_lock_init(&h->scan_lock);
8680 spin_lock_init(&h->reset_lock);
8681 atomic_set(&h->passthru_cmds_avail, HPSA_MAX_CONCURRENT_PASSTHRUS);
8682
8683 /* Allocate and clear per-cpu variable lockup_detected */
8684 h->lockup_detected = alloc_percpu(u32);
8685 if (!h->lockup_detected) {
8686 dev_err(&h->pdev->dev, "Failed to allocate lockup detector\n");
8687 rc = -ENOMEM;
8688 goto clean1; /* aer/h */
8689 }
8690 set_lockup_detected_for_all_cpus(h, 0);
8691
8692 rc = hpsa_pci_init(h);
8693 if (rc)
8694 goto clean2; /* lu, aer/h */
8695
8696 /* relies on h-> settings made by hpsa_pci_init, including
8697 * interrupt_mode h->intr */
8698 rc = hpsa_scsi_host_alloc(h);
8699 if (rc)
8700 goto clean2_5; /* pci, lu, aer/h */
8701
8702 sprintf(h->devname, HPSA "%d", h->scsi_host->host_no);
8703 h->ctlr = number_of_controllers;
8704 number_of_controllers++;
8705
8706 /* configure PCI DMA stuff */
8707 rc = dma_set_mask(&pdev->dev, DMA_BIT_MASK(64));
8708 if (rc != 0)
8709 rc = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));

> 8710			if (rc != 0) {
  8711				dev_err(&pdev->dev, "no suitable DMA available\n");
  8712				goto clean3;	/* shost, pci, lu, aer/h */
  8713			}
  8714		}
  8715	
  8716		/* make sure the board interrupts are off */
  8717		h->access.set_intr_mask(h, HPSA_INTR_OFF);
  8718	
> 8719		rc = hpsa_request_irqs(h, do_hpsa_intr_msi, do_hpsa_intr_intx);

8720 if (rc)
8721 goto clean3; /* shost, pci, lu, aer/h */
8722 rc = hpsa_alloc_cmd_pool(h);
8723 if (rc)
8724 goto clean4; /* irq, shost, pci, lu, aer/h */
8725 rc = hpsa_alloc_sg_chain_blocks(h);
8726 if (rc)
8727 goto clean5; /* cmd, irq, shost, pci, lu, aer/h */
8728 init_waitqueue_head(&h->scan_wait_queue);
8729 init_waitqueue_head(&h->event_sync_wait_queue);
8730 mutex_init(&h->reset_mutex);
8731 h->scan_finished = 1; /* no scan currently in progress */
8732 h->scan_waiting = 0;
8733
8734 pci_set_drvdata(pdev, h);
8735 h->ndevices = 0;
8736
8737 spin_lock_init(&h->devlock);
8738 rc = hpsa_put_ctlr_into_performant_mode(h);
8739 if (rc)
8740 goto clean6; /* sg, cmd, irq, shost, pci, lu, aer/h */
8741
8742 /* create the resubmit workqueue */
8743 h->rescan_ctlr_wq = hpsa_create_controller_wq(h, "rescan");
8744 if (!h->rescan_ctlr_wq) {
8745 rc = -ENOMEM;
8746 goto clean7;
8747 }
8748
8749 h->resubmit_wq = hpsa_create_controller_wq(h, "resubmit");
8750 if (!h->resubmit_wq) {
8751 rc = -ENOMEM;
8752 goto clean7; /* aer/h */
8753 }
8754
8755 h->monitor_ctlr_wq = hpsa_create_controller_wq(h, "monitor");
8756 if (!h->monitor_ctlr_wq) {
8757 rc = -ENOMEM;
8758 goto clean7;
8759 }
8760
8761 /*
8762 * At this point, the controller is ready to take commands.
8763 * Now, if reset_devices and the hard reset didn't work, try
8764 * the soft reset and see if that works.
8765 */
8766 if (try_soft_reset) {
8767
8768 /* This is kind of gross. We may or may not get a completion
8769 * from the soft reset command, and if we do, then the value
8770 * from the fifo may or may not be valid. So, we wait 10 secs
8771 * after the reset throwing away any completions we get during
8772 * that time. Unregister the interrupt handler and register
8773 * fake ones to scoop up any residual completions.
8774 */
8775 spin_lock_irqsave(&h->lock, flags);
8776 h->access.set_intr_mask(h, HPSA_INTR_OFF);
8777 spin_unlock_irqrestore(&h->lock, flags);
8778 hpsa_free_irqs(h);
8779 rc = hpsa_request_irqs(h, hpsa_msix_discard_completions,
8780 hpsa_intx_discard_completions);
8781 if (rc) {
8782 dev_warn(&h->pdev->dev,
8783 "Failed to request_irq after soft reset.\n");
8784 /*
8785 * cannot goto clean7 or free_irqs will be called
8786 * again. Instead, do its work
8787 */
8788 hpsa_free_performant_mode(h); /* clean7 */
8789 hpsa_free_sg_chain_blocks(h); /* clean6 */
8790 hpsa_free_cmd_pool(h); /* clean5 */
8791 /*
8792 * skip hpsa_free_irqs(h) clean4 since that
8793 * was just called before request_irqs failed
8794 */
8795 goto clean3;
8796 }
8797
8798 rc = hpsa_kdump_soft_reset(h);
8799 if (rc)
8800 /* Neither hard nor soft reset worked, we're hosed. */
8801 goto clean7;
8802
8803 dev_info(&h->pdev->dev, "Board READY.\n");
8804 dev_info(&h->pdev->dev,
8805 "Waiting for stale completions to drain.\n");
8806 h->access.set_intr_mask(h, HPSA_INTR_ON);
8807 msleep(10000);
8808 h->access.set_intr_mask(h, HPSA_INTR_OFF);
8809
8810 rc = controller_reset_failed(h->cfgtable);
8811 if (rc)
8812 dev_info(&h->pdev->dev,
8813 "Soft reset appears to have failed.\n");
8814
8815 /* since the controller's reset, we have to go back and re-init
8816 * everything. Easiest to just forget what we've done and do it
8817 * all over again.
8818 */
8819 hpsa_undo_allocations_after_kdump_soft_reset(h);
8820 try_soft_reset = 0;
8821 if (rc)
8822 /* don't goto clean, we already unallocated */
8823 return -ENODEV;
8824
8825 goto reinit_after_soft_reset;
8826 }
8827
8828 /* Enable Accelerated IO path at driver layer */
8829 h->acciopath_status = 1;
8830 /* Disable discovery polling.*/
8831 h->discovery_polling = 0;
8832
8833
8834 /* Turn the interrupts on so we can service requests */
8835 h->access.set_intr_mask(h, HPSA_INTR_ON);
8836
8837 hpsa_hba_inquiry(h);
8838
8839 h->lastlogicals = kzalloc(sizeof(*(h->lastlogicals)), GFP_KERNEL);
8840 if (!h->lastlogicals)
8841 dev_info(&h->pdev->dev,
8842 "Can't track change to report lun data\n");
8843
8844 /* hook into SCSI subsystem */
8845 rc = hpsa_scsi_add_host(h);
8846 if (rc)
8847 goto clean7; /* perf, sg, cmd, irq, shost, pci, lu, aer/h */
8848
8849 /* Monitor the controller for firmware lockups */
8850 h->heartbeat_sample_interval = HEARTBEAT_SAMPLE_INTERVAL;
8851 INIT_DELAYED_WORK(&h->monitor_ctlr_work, hpsa_monitor_ctlr_worker);
8852 schedule_delayed_work(&h->monitor_ctlr_work,
8853 h->heartbeat_sample_interval);
8854 INIT_DELAYED_WORK(&h->rescan_ctlr_work, hpsa_rescan_ctlr_worker);
8855 queue_delayed_work(h->rescan_ctlr_wq, &h->rescan_ctlr_work,
8856 h->heartbeat_sample_interval);
8857 INIT_DELAYED_WORK(&h->event_monitor_work, hpsa_event_monitor_worker);
8858 schedule_delayed_work(&h->event_monitor_work,
8859 HPSA_EVENT_MONITOR_INTERVAL);
8860 return 0;
8861

---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all(a)lists.01.org

author
#21 lore raw

Re: [RESEND 19/19] scsi: hpsa: Strip out a bunch of set but unused variables

Quoted 26 lines · kernel test robot

Hi Lee,

I love your patch! Perhaps something to improve:

[auto build test WARNING on mkp-scsi/for-next]
[also build test WARNING on scsi/for-next linus/master v5.10-rc2 next-20201103] [cannot apply to linux/master]
[If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]

url:    https://github.com/0day-ci/linux/commits/Lee-Jones/Rid-W-1-warnings-in-SCSI/20201102-222943
base:   https://git.kernel.org/pub/scm/linux/kernel/git/mkp/scsi.git for-next
config: s390-randconfig-r015-20201103 (attached as .config)
compiler: clang version 12.0.0 (https://github.com/llvm/llvm-project 1fcd5d5655e29f85e12b402e32974f207cfedf32)

reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross
# install s390 cross compiling tool for clang build
# apt-get install binutils-s390x-linux-gnu
# https://github.com/0day-ci/linux/commit/072f10ed00f6c539280c1143a76e724bd7618c22
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review Lee-Jones/Rid-W-1-warnings-in-SCSI/20201102-222943 git checkout 072f10ed00f6c539280c1143a76e724bd7618c22
# save the attached .config to linux build tree
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross ARCH=s390

[...]

Quoted 3 lines
  8706		/* configure PCI DMA stuff */
  8707		rc = dma_set_mask(&pdev->dev, DMA_BIT_MASK(64));
  8708		if (rc != 0)

Ah, missing brace.

I wonder why my own compiler didn't complain.

Will fix.

Quoted 13 lines

8709 rc = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));

Quoted 1 line

8710 if (rc != 0) {

8711 dev_err(&pdev->dev, "no suitable DMA available\n");
8712 goto clean3; /* shost, pci, lu, aer/h */
8713 }
8714 }
8715
8716 /* make sure the board interrupts are off */
8717 h->access.set_intr_mask(h, HPSA_INTR_OFF);
8718

Quoted 1 line

8719 rc = hpsa_request_irqs(h, do_hpsa_intr_msi, do_hpsa_intr_intx);

8720 if (rc)
8721 goto clean3; /* shost, pci, lu, aer/h */

Signature · 4 lines
Lee Jones [李琼斯]
Senior Technical Lead - Developer Services
Linaro.org │ Open source software for Arm SoCs
Follow Linaro: Facebook | Twitter | Blog
#22 lore raw

Re: [RESEND 19/19] scsi: hpsa: Strip out a bunch of set but unused variables

In reply to Lee Jones
I love your patch! Yet something to improve:

Hi Lee,

I love your patch! Yet something to improve:

[auto build test ERROR on mkp-scsi/for-next]
[also build test ERROR on scsi/for-next linus/master v5.10-rc2 next-20201103] [cannot apply to linux/master]
[If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]

url:    https://github.com/0day-ci/linux/commits/Lee-Jones/Rid-W-1-warnings-in-SCSI/20201102-222943
base:   https://git.kernel.org/pub/scm/linux/kernel/git/mkp/scsi.git for-next
config: x86_64-rhel (attached as .config)
compiler: gcc-9 (Debian 9.3.0-15) 9.3.0
reproduce (this is a W=1 build):
        # https://github.com/0day-ci/linux/commit/072f10ed00f6c539280c1143a76e724bd7618c22
        git remote add linux-review https://github.com/0day-ci/linux
        git fetch --no-tags linux-review Lee-Jones/Rid-W-1-warnings-in-SCSI/20201102-222943
        git checkout 072f10ed00f6c539280c1143a76e724bd7618c22
        # save the attached .config to linux build tree
        make W=1 ARCH=x86_64 

If you fix the issue, kindly add following tag as appropriate

All errors (new ones prefixed by >>):

drivers/scsi/hpsa.c: In function 'hpsa_init_one':
drivers/scsi/hpsa.c:8708:2: warning: this 'if' clause does not guard... [-Wmisleading-indentation]

    8708 |  if (rc != 0)
         |  ^~
   drivers/scsi/hpsa.c:8710:3: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the 'if'
    8710 |   if (rc != 0) {
         |   ^~
>> drivers/scsi/hpsa.c:8712:4: error: label 'clean3' used but not defined
    8712 |    goto clean3; /* shost, pci, lu, aer/h */
         |    ^~~~
>> drivers/scsi/hpsa.c:8700:3: error: label 'clean2_5' used but not defined
    8700 |   goto clean2_5; /* pci, lu, aer/h */
         |   ^~~~
>> drivers/scsi/hpsa.c:8694:3: error: label 'clean2' used but not defined
    8694 |   goto clean2; /* lu, aer/h */
         |   ^~~~
>> drivers/scsi/hpsa.c:8688:3: error: label 'clean1' used but not defined
    8688 |   goto clean1; /* aer/h */
         |   ^~~~
   drivers/scsi/hpsa.c:8660:1: warning: label 'reinit_after_soft_reset' defined but not used [-Wunused-label]
    8660 | reinit_after_soft_reset:
         | ^~~~~~~~~~~~~~~~~~~~~~~
   drivers/scsi/hpsa.c:8635:16: warning: unused variable 'flags' [-Wunused-variable]
    8635 |  unsigned long flags;
         |                ^~~~~
   drivers/scsi/hpsa.c:8634:6: warning: variable 'try_soft_reset' set but not used [-Wunused-but-set-variable]
    8634 |  int try_soft_reset = 0;
         |      ^~~~~~~~~~~~~~
   drivers/scsi/hpsa.c: At top level:
>> drivers/scsi/hpsa.c:8717:3: error: expected '=', ',', ';', 'asm' or '__attribute__' before '->' token
    8717 |  h->access.set_intr_mask(h, HPSA_INTR_OFF);
         |   ^~
   drivers/scsi/hpsa.c:8719:2: warning: data definition has no type or storage class
    8719 |  rc = hpsa_request_irqs(h, do_hpsa_intr_msi, do_hpsa_intr_intx);
         |  ^~
>> drivers/scsi/hpsa.c:8719:2: error: type defaults to 'int' in declaration of 'rc' [-Werror=implicit-int]
>> drivers/scsi/hpsa.c:8719:25: error: 'h' undeclared here (not in a function)
    8719 |  rc = hpsa_request_irqs(h, do_hpsa_intr_msi, do_hpsa_intr_intx);
         |                         ^
>> drivers/scsi/hpsa.c:8720:2: error: expected identifier or '(' before 'if'
    8720 |  if (rc)
         |  ^~
   drivers/scsi/hpsa.c:8722:2: warning: data definition has no type or storage class
    8722 |  rc = hpsa_alloc_cmd_pool(h);
         |  ^~
   drivers/scsi/hpsa.c:8722:2: error: type defaults to 'int' in declaration of 'rc' [-Werror=implicit-int]
>> drivers/scsi/hpsa.c:8722:2: error: redefinition of 'rc'
   drivers/scsi/hpsa.c:8719:2: note: previous definition of 'rc' was here
    8719 |  rc = hpsa_request_irqs(h, do_hpsa_intr_msi, do_hpsa_intr_intx);
         |  ^~
   drivers/scsi/hpsa.c:8723:2: error: expected identifier or '(' before 'if'
    8723 |  if (rc)
         |  ^~
   drivers/scsi/hpsa.c:8725:2: warning: data definition has no type or storage class
    8725 |  rc = hpsa_alloc_sg_chain_blocks(h);
         |  ^~
   drivers/scsi/hpsa.c:8725:2: error: type defaults to 'int' in declaration of 'rc' [-Werror=implicit-int]
   drivers/scsi/hpsa.c:8725:2: error: redefinition of 'rc'
   drivers/scsi/hpsa.c:8719:2: note: previous definition of 'rc' was here
    8719 |  rc = hpsa_request_irqs(h, do_hpsa_intr_msi, do_hpsa_intr_intx);
         |  ^~
   drivers/scsi/hpsa.c:8726:2: error: expected identifier or '(' before 'if'
    8726 |  if (rc)
         |  ^~
   In file included from include/linux/mmzone.h:10,
                    from include/linux/gfp.h:6,
                    from include/linux/umh.h:4,
                    from include/linux/kmod.h:9,
                    from include/linux/module.h:16,
                    from drivers/scsi/hpsa.c:21:
>> include/linux/wait.h:66:2: error: expected identifier or '(' before 'do'
      66 |  do {         \
         |  ^~
   drivers/scsi/hpsa.c:8728:2: note: in expansion of macro 'init_waitqueue_head'
    8728 |  init_waitqueue_head(&h->scan_wait_queue);
         |  ^~~~~~~~~~~~~~~~~~~
>> include/linux/wait.h:70:4: error: expected identifier or '(' before 'while'
      70 |  } while (0)
         |    ^~~~~
   drivers/scsi/hpsa.c:8728:2: note: in expansion of macro 'init_waitqueue_head'
    8728 |  init_waitqueue_head(&h->scan_wait_queue);
         |  ^~~~~~~~~~~~~~~~~~~
>> include/linux/wait.h:66:2: error: expected identifier or '(' before 'do'
      66 |  do {         \
         |  ^~
   drivers/scsi/hpsa.c:8729:2: note: in expansion of macro 'init_waitqueue_head'
    8729 |  init_waitqueue_head(&h->event_sync_wait_queue);
         |  ^~~~~~~~~~~~~~~~~~~
>> include/linux/wait.h:70:4: error: expected identifier or '(' before 'while'
      70 |  } while (0)
         |    ^~~~~
   drivers/scsi/hpsa.c:8729:2: note: in expansion of macro 'init_waitqueue_head'
    8729 |  init_waitqueue_head(&h->event_sync_wait_queue);
         |  ^~~~~~~~~~~~~~~~~~~
   In file included from include/linux/seqlock.h:19,
                    from include/linux/mmzone.h:16,
                    from include/linux/gfp.h:6,
                    from include/linux/umh.h:4,
                    from include/linux/kmod.h:9,
                    from include/linux/module.h:16,
                    from drivers/scsi/hpsa.c:21:
>> include/linux/mutex.h:116:1: error: expected identifier or '(' before 'do'
     116 | do {         \
         | ^~
   drivers/scsi/hpsa.c:8730:2: note: in expansion of macro 'mutex_init'
    8730 |  mutex_init(&h->reset_mutex);
         |  ^~~~~~~~~~
>> include/linux/mutex.h:120:3: error: expected identifier or '(' before 'while'
     120 | } while (0)
         |   ^~~~~
   drivers/scsi/hpsa.c:8730:2: note: in expansion of macro 'mutex_init'
    8730 |  mutex_init(&h->reset_mutex);
         |  ^~~~~~~~~~
   drivers/scsi/hpsa.c:8731:3: error: expected '=', ',', ';', 'asm' or '__attribute__' before '->' token
    8731 |  h->scan_finished = 1; /* no scan currently in progress */
         |   ^~
   drivers/scsi/hpsa.c:8732:3: error: expected '=', ',', ';', 'asm' or '__attribute__' before '->' token
    8732 |  h->scan_waiting = 0;
         |   ^~
   drivers/scsi/hpsa.c:8734:2: warning: data definition has no type or storage class
    8734 |  pci_set_drvdata(pdev, h);
         |  ^~~~~~~~~~~~~~~
>> drivers/scsi/hpsa.c:8734:2: error: type defaults to 'int' in declaration of 'pci_set_drvdata' [-Werror=implicit-int]
   drivers/scsi/hpsa.c:8734:2: warning: parameter names (without types) in function declaration
>> drivers/scsi/hpsa.c:8734:2: error: conflicting types for 'pci_set_drvdata'
   In file included from drivers/scsi/hpsa.c:24:
   include/linux/pci.h:1870:20: note: previous definition of 'pci_set_drvdata' was here
    1870 | static inline void pci_set_drvdata(struct pci_dev *pdev, void *data)
         |                    ^~~~~~~~~~~~~~~
   drivers/scsi/hpsa.c:8735:3: error: expected '=', ',', ';', 'asm' or '__attribute__' before '->' token
    8735 |  h->ndevices = 0;
         |   ^~
   In file included from include/linux/mmzone.h:8,
                    from include/linux/gfp.h:6,
                    from include/linux/umh.h:4,
                    from include/linux/kmod.h:9,
                    from include/linux/module.h:16,
                    from drivers/scsi/hpsa.c:21:
>> include/linux/spinlock.h:345:1: error: expected identifier or '(' before 'do'
     345 | do {      \
         | ^~
   drivers/scsi/hpsa.c:8737:2: note: in expansion of macro 'spin_lock_init'
    8737 |  spin_lock_init(&h->devlock);
         |  ^~~~~~~~~~~~~~
>> include/linux/spinlock.h:348:3: error: expected identifier or '(' before 'while'
     348 | } while (0)
         |   ^~~~~
   drivers/scsi/hpsa.c:8737:2: note: in expansion of macro 'spin_lock_init'
    8737 |  spin_lock_init(&h->devlock);
         |  ^~~~~~~~~~~~~~
   drivers/scsi/hpsa.c:8738:2: warning: data definition has no type or storage class
    8738 |  rc = hpsa_put_ctlr_into_performant_mode(h);
         |  ^~
   drivers/scsi/hpsa.c:8738:2: error: type defaults to 'int' in declaration of 'rc' [-Werror=implicit-int]
   drivers/scsi/hpsa.c:8738:2: error: redefinition of 'rc'
   drivers/scsi/hpsa.c:8719:2: note: previous definition of 'rc' was here
    8719 |  rc = hpsa_request_irqs(h, do_hpsa_intr_msi, do_hpsa_intr_intx);
         |  ^~
   drivers/scsi/hpsa.c:8739:2: error: expected identifier or '(' before 'if'
    8739 |  if (rc)
         |  ^~
   drivers/scsi/hpsa.c:8743:3: error: expected '=', ',', ';', 'asm' or '__attribute__' before '->' token
    8743 |  h->rescan_ctlr_wq = hpsa_create_controller_wq(h, "rescan");
         |   ^~
   drivers/scsi/hpsa.c:8744:2: error: expected identifier or '(' before 'if'
    8744 |  if (!h->rescan_ctlr_wq) {
         |  ^~
   drivers/scsi/hpsa.c:8749:3: error: expected '=', ',', ';', 'asm' or '__attribute__' before '->' token
    8749 |  h->resubmit_wq = hpsa_create_controller_wq(h, "resubmit");
         |   ^~
   drivers/scsi/hpsa.c:8750:2: error: expected identifier or '(' before 'if'
    8750 |  if (!h->resubmit_wq) {
         |  ^~
   drivers/scsi/hpsa.c:8755:3: error: expected '=', ',', ';', 'asm' or '__attribute__' before '->' token
    8755 |  h->monitor_ctlr_wq = hpsa_create_controller_wq(h, "monitor");
         |   ^~
   drivers/scsi/hpsa.c:8756:2: error: expected identifier or '(' before 'if'
    8756 |  if (!h->monitor_ctlr_wq) {
         |  ^~
   drivers/scsi/hpsa.c:8766:2: error: expected identifier or '(' before 'if'
    8766 |  if (try_soft_reset) {
         |  ^~
   drivers/scsi/hpsa.c:8829:3: error: expected '=', ',', ';', 'asm' or '__attribute__' before '->' token
    8829 |  h->acciopath_status = 1;
         |   ^~
   drivers/scsi/hpsa.c:8831:3: error: expected '=', ',', ';', 'asm' or '__attribute__' before '->' token
    8831 |  h->discovery_polling = 0;
         |   ^~
   drivers/scsi/hpsa.c:8835:3: error: expected '=', ',', ';', 'asm' or '__attribute__' before '->' token
    8835 |  h->access.set_intr_mask(h, HPSA_INTR_ON);
         |   ^~
   drivers/scsi/hpsa.c:8837:2: warning: data definition has no type or storage class
    8837 |  hpsa_hba_inquiry(h);
         |  ^~~~~~~~~~~~~~~~
>> drivers/scsi/hpsa.c:8837:2: error: type defaults to 'int' in declaration of 'hpsa_hba_inquiry' [-Werror=implicit-int]
   drivers/scsi/hpsa.c:8837:2: warning: parameter names (without types) in function declaration
   drivers/scsi/hpsa.c:8837:2: error: conflicting types for 'hpsa_hba_inquiry'
   drivers/scsi/hpsa.c:7917:13: note: previous definition of 'hpsa_hba_inquiry' was here
    7917 | static void hpsa_hba_inquiry(struct ctlr_info *h)
         |             ^~~~~~~~~~~~~~~~
   drivers/scsi/hpsa.c:8839:3: error: expected '=', ',', ';', 'asm' or '__attribute__' before '->' token
    8839 |  h->lastlogicals = kzalloc(sizeof(*(h->lastlogicals)), GFP_KERNEL);
         |   ^~
   drivers/scsi/hpsa.c:8840:2: error: expected identifier or '(' before 'if'
    8840 |  if (!h->lastlogicals)
         |  ^~
   drivers/scsi/hpsa.c:8845:2: warning: data definition has no type or storage class
    8845 |  rc = hpsa_scsi_add_host(h);
         |  ^~
   drivers/scsi/hpsa.c:8845:2: error: type defaults to 'int' in declaration of 'rc' [-Werror=implicit-int]
   drivers/scsi/hpsa.c:8845:2: error: redefinition of 'rc'
   drivers/scsi/hpsa.c:8719:2: note: previous definition of 'rc' was here
    8719 |  rc = hpsa_request_irqs(h, do_hpsa_intr_msi, do_hpsa_intr_intx);
         |  ^~
   drivers/scsi/hpsa.c:8846:2: error: expected identifier or '(' before 'if'
    8846 |  if (rc)
         |  ^~
   drivers/scsi/hpsa.c:8850:3: error: expected '=', ',', ';', 'asm' or '__attribute__' before '->' token
    8850 |  h->heartbeat_sample_interval = HEARTBEAT_SAMPLE_INTERVAL;
         |   ^~
   In file included from include/linux/srcu.h:21,
                    from include/linux/notifier.h:16,
                    from arch/x86/include/asm/uprobes.h:13,
                    from include/linux/uprobes.h:49,
                    from include/linux/mm_types.h:14,
                    from include/linux/mmzone.h:21,
                    from include/linux/gfp.h:6,
                    from include/linux/umh.h:4,
                    from include/linux/kmod.h:9,
                    from include/linux/module.h:16,
                    from drivers/scsi/hpsa.c:21:
   include/linux/workqueue.h:256:2: error: expected identifier or '(' before 'do'
     256 |  do {        \
         |  ^~
   include/linux/workqueue.h:272:2: note: in expansion of macro '__INIT_DELAYED_WORK'
     272 |  __INIT_DELAYED_WORK(_work, _func, 0)
         |  ^~~~~~~~~~~~~~~~~~~
   drivers/scsi/hpsa.c:8851:2: note: in expansion of macro 'INIT_DELAYED_WORK'
    8851 |  INIT_DELAYED_WORK(&h->monitor_ctlr_work, hpsa_monitor_ctlr_worker);
         |  ^~~~~~~~~~~~~~~~~
   include/linux/workqueue.h:261:4: error: expected identifier or '(' before 'while'
     261 |  } while (0)
         |    ^~~~~
   include/linux/workqueue.h:272:2: note: in expansion of macro '__INIT_DELAYED_WORK'
     272 |  __INIT_DELAYED_WORK(_work, _func, 0)
         |  ^~~~~~~~~~~~~~~~~~~
   drivers/scsi/hpsa.c:8851:2: note: in expansion of macro 'INIT_DELAYED_WORK'
    8851 |  INIT_DELAYED_WORK(&h->monitor_ctlr_work, hpsa_monitor_ctlr_worker);
         |  ^~~~~~~~~~~~~~~~~
   drivers/scsi/hpsa.c:8852:24: error: expected declaration specifiers or '...' before '&' token
    8852 |  schedule_delayed_work(&h->monitor_ctlr_work,
         |                        ^
   drivers/scsi/hpsa.c:8853:5: error: expected declaration specifiers or '...' before 'h'
    8853 |     h->heartbeat_sample_interval);
         |     ^
   In file included from include/linux/srcu.h:21,
                    from include/linux/notifier.h:16,
                    from arch/x86/include/asm/uprobes.h:13,
                    from include/linux/uprobes.h:49,
                    from include/linux/mm_types.h:14,
                    from include/linux/mmzone.h:21,
                    from include/linux/gfp.h:6,
                    from include/linux/umh.h:4,
                    from include/linux/kmod.h:9,
                    from include/linux/module.h:16,
                    from drivers/scsi/hpsa.c:21:
   include/linux/workqueue.h:256:2: error: expected identifier or '(' before 'do'
     256 |  do {        \
         |  ^~
   include/linux/workqueue.h:272:2: note: in expansion of macro '__INIT_DELAYED_WORK'
     272 |  __INIT_DELAYED_WORK(_work, _func, 0)
         |  ^~~~~~~~~~~~~~~~~~~
   drivers/scsi/hpsa.c:8854:2: note: in expansion of macro 'INIT_DELAYED_WORK'
    8854 |  INIT_DELAYED_WORK(&h->rescan_ctlr_work, hpsa_rescan_ctlr_worker);
         |  ^~~~~~~~~~~~~~~~~
   include/linux/workqueue.h:261:4: error: expected identifier or '(' before 'while'
     261 |  } while (0)
         |    ^~~~~
   include/linux/workqueue.h:272:2: note: in expansion of macro '__INIT_DELAYED_WORK'
     272 |  __INIT_DELAYED_WORK(_work, _func, 0)
         |  ^~~~~~~~~~~~~~~~~~~
   drivers/scsi/hpsa.c:8854:2: note: in expansion of macro 'INIT_DELAYED_WORK'
    8854 |  INIT_DELAYED_WORK(&h->rescan_ctlr_work, hpsa_rescan_ctlr_worker);
         |  ^~~~~~~~~~~~~~~~~
   drivers/scsi/hpsa.c:8855:22: error: expected ')' before '->' token
    8855 |  queue_delayed_work(h->rescan_ctlr_wq, &h->rescan_ctlr_work,
         |                      ^~
         |                      )
   In file included from include/linux/srcu.h:21,
                    from include/linux/notifier.h:16,
                    from arch/x86/include/asm/uprobes.h:13,
                    from include/linux/uprobes.h:49,
                    from include/linux/mm_types.h:14,
                    from include/linux/mmzone.h:21,
                    from include/linux/gfp.h:6,

vim +/clean3 +8712 drivers/scsi/hpsa.c

8b834bff1b73dce Ming Lei           2018-03-13  8629  
6f039790510fd63 Greg Kroah-Hartman 2012-12-21  8630  static int hpsa_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
4c2a8c40d877eff Stephen M. Cameron 2010-06-16  8631  {
072f10ed00f6c53 Lee Jones          2020-11-02  8632  	int rc;
4c2a8c40d877eff Stephen M. Cameron 2010-06-16  8633  	struct ctlr_info *h;
64670ac8702ec37 Stephen M. Cameron 2011-05-03  8634  	int try_soft_reset = 0;
64670ac8702ec37 Stephen M. Cameron 2011-05-03  8635  	unsigned long flags;
6b6c1cd7da65225 Tomas Henzl        2015-04-02  8636  	u32 board_id;
4c2a8c40d877eff Stephen M. Cameron 2010-06-16  8637  
4c2a8c40d877eff Stephen M. Cameron 2010-06-16  8638  	if (number_of_controllers == 0)
4c2a8c40d877eff Stephen M. Cameron 2010-06-16  8639  		printk(KERN_INFO DRIVER_NAME "\n");
4c2a8c40d877eff Stephen M. Cameron 2010-06-16  8640  
135ae6edeb51979 Hannes Reinecke    2017-08-15  8641  	rc = hpsa_lookup_board_id(pdev, &board_id, NULL);
6b6c1cd7da65225 Tomas Henzl        2015-04-02  8642  	if (rc < 0) {
6b6c1cd7da65225 Tomas Henzl        2015-04-02  8643  		dev_warn(&pdev->dev, "Board ID not found\n");
6b6c1cd7da65225 Tomas Henzl        2015-04-02  8644  		return rc;
6b6c1cd7da65225 Tomas Henzl        2015-04-02  8645  	}
6b6c1cd7da65225 Tomas Henzl        2015-04-02  8646  
6b6c1cd7da65225 Tomas Henzl        2015-04-02  8647  	rc = hpsa_init_reset_devices(pdev, board_id);
64670ac8702ec37 Stephen M. Cameron 2011-05-03  8648  	if (rc) {
64670ac8702ec37 Stephen M. Cameron 2011-05-03  8649  		if (rc != -ENOTSUPP)
4c2a8c40d877eff Stephen M. Cameron 2010-06-16  8650  			return rc;
64670ac8702ec37 Stephen M. Cameron 2011-05-03  8651  		/* If the reset fails in a particular way (it has no way to do
64670ac8702ec37 Stephen M. Cameron 2011-05-03  8652  		 * a proper hard reset, so returns -ENOTSUPP) we can try to do
64670ac8702ec37 Stephen M. Cameron 2011-05-03  8653  		 * a soft reset once we get the controller configured up to the
64670ac8702ec37 Stephen M. Cameron 2011-05-03  8654  		 * point that it can accept a command.
64670ac8702ec37 Stephen M. Cameron 2011-05-03  8655  		 */
64670ac8702ec37 Stephen M. Cameron 2011-05-03  8656  		try_soft_reset = 1;
64670ac8702ec37 Stephen M. Cameron 2011-05-03  8657  		rc = 0;
64670ac8702ec37 Stephen M. Cameron 2011-05-03  8658  	}
64670ac8702ec37 Stephen M. Cameron 2011-05-03  8659  
64670ac8702ec37 Stephen M. Cameron 2011-05-03  8660  reinit_after_soft_reset:
4c2a8c40d877eff Stephen M. Cameron 2010-06-16  8661  
303932fd4ff63e8 Don Brace          2010-02-04  8662  	/* Command structures must be aligned on a 32-byte boundary because
303932fd4ff63e8 Don Brace          2010-02-04  8663  	 * the 5 lower bits of the address are used by the hardware. and by
303932fd4ff63e8 Don Brace          2010-02-04  8664  	 * the driver.  See comments in hpsa.h for more info.
303932fd4ff63e8 Don Brace          2010-02-04  8665  	 */
303932fd4ff63e8 Don Brace          2010-02-04  8666  	BUILD_BUG_ON(sizeof(struct CommandList) % COMMANDLIST_ALIGNMENT);
8b834bff1b73dce Ming Lei           2018-03-13  8667  	h = hpda_alloc_ctlr_info();
105a3dbc74522c2 Robert Elliott     2015-04-23  8668  	if (!h) {
105a3dbc74522c2 Robert Elliott     2015-04-23  8669  		dev_err(&pdev->dev, "Failed to allocate controller head\n");
ecd9aad402765ab Stephen M. Cameron 2010-02-04  8670  		return -ENOMEM;
105a3dbc74522c2 Robert Elliott     2015-04-23  8671  	}
edd163687ea59f0 Stephen M. Cameron 2009-12-08  8672  
55c06c7171f63aa Stephen M. Cameron 2010-05-27  8673  	h->pdev = pdev;
105a3dbc74522c2 Robert Elliott     2015-04-23  8674  
a9a3a2739a44fc0 Stephen M. Cameron 2011-02-15  8675  	h->intr_mode = hpsa_simple_mode ? SIMPLE_MODE_INT : PERF_MODE_INT;
9846590edadb3c9 Stephen M. Cameron 2014-02-21  8676  	INIT_LIST_HEAD(&h->offline_device_list);
6eaf46fdc719991 Stephen M. Cameron 2011-01-06  8677  	spin_lock_init(&h->lock);
9846590edadb3c9 Stephen M. Cameron 2014-02-21  8678  	spin_lock_init(&h->offline_device_lock);
6eaf46fdc719991 Stephen M. Cameron 2011-01-06  8679  	spin_lock_init(&h->scan_lock);
c59d04f30d4216a Don Brace          2017-05-04  8680  	spin_lock_init(&h->reset_lock);
34f0c6277c686b1 Don Brace          2015-01-23  8681  	atomic_set(&h->passthru_cmds_avail, HPSA_MAX_CONCURRENT_PASSTHRUS);
094963dad88c86f Stephen M. Cameron 2014-05-29  8682  
094963dad88c86f Stephen M. Cameron 2014-05-29  8683  	/* Allocate and clear per-cpu variable lockup_detected */
094963dad88c86f Stephen M. Cameron 2014-05-29  8684  	h->lockup_detected = alloc_percpu(u32);
2a5ac3265378687 Stephen M. Cameron 2014-07-03  8685  	if (!h->lockup_detected) {
105a3dbc74522c2 Robert Elliott     2015-04-23  8686  		dev_err(&h->pdev->dev, "Failed to allocate lockup detector\n");
2a5ac3265378687 Stephen M. Cameron 2014-07-03  8687  		rc = -ENOMEM;
2efa5929cb44826 Robert Elliott     2015-04-23 @8688  		goto clean1;	/* aer/h */
2a5ac3265378687 Stephen M. Cameron 2014-07-03  8689  	}
094963dad88c86f Stephen M. Cameron 2014-05-29  8690  	set_lockup_detected_for_all_cpus(h, 0);
094963dad88c86f Stephen M. Cameron 2014-05-29  8691  
55c06c7171f63aa Stephen M. Cameron 2010-05-27  8692  	rc = hpsa_pci_init(h);
105a3dbc74522c2 Robert Elliott     2015-04-23  8693  	if (rc)
2946e82bdd76568 Robert Elliott     2015-04-23 @8694  		goto clean2;	/* lu, aer/h */
2946e82bdd76568 Robert Elliott     2015-04-23  8695  
2946e82bdd76568 Robert Elliott     2015-04-23  8696  	/* relies on h-> settings made by hpsa_pci_init, including
2946e82bdd76568 Robert Elliott     2015-04-23  8697  	 * interrupt_mode h->intr */
2946e82bdd76568 Robert Elliott     2015-04-23  8698  	rc = hpsa_scsi_host_alloc(h);
2946e82bdd76568 Robert Elliott     2015-04-23  8699  	if (rc)
2946e82bdd76568 Robert Elliott     2015-04-23 @8700  		goto clean2_5;	/* pci, lu, aer/h */
edd163687ea59f0 Stephen M. Cameron 2009-12-08  8701  
2946e82bdd76568 Robert Elliott     2015-04-23  8702  	sprintf(h->devname, HPSA "%d", h->scsi_host->host_no);
edd163687ea59f0 Stephen M. Cameron 2009-12-08  8703  	h->ctlr = number_of_controllers;
edd163687ea59f0 Stephen M. Cameron 2009-12-08  8704  	number_of_controllers++;
edd163687ea59f0 Stephen M. Cameron 2009-12-08  8705  
edd163687ea59f0 Stephen M. Cameron 2009-12-08  8706  	/* configure PCI DMA stuff */
8bc8f47ea3964ef Christoph Hellwig  2018-10-10  8707  	rc = dma_set_mask(&pdev->dev, DMA_BIT_MASK(64));
072f10ed00f6c53 Lee Jones          2020-11-02  8708  	if (rc != 0)
8bc8f47ea3964ef Christoph Hellwig  2018-10-10  8709  		rc = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
072f10ed00f6c53 Lee Jones          2020-11-02  8710  		if (rc != 0) {
edd163687ea59f0 Stephen M. Cameron 2009-12-08  8711  			dev_err(&pdev->dev, "no suitable DMA available\n");
2946e82bdd76568 Robert Elliott     2015-04-23 @8712  			goto clean3;	/* shost, pci, lu, aer/h */
edd163687ea59f0 Stephen M. Cameron 2009-12-08  8713  		}
ecd9aad402765ab Stephen M. Cameron 2010-02-04  8714  	}

edd163687ea59f0 Stephen M. Cameron 2009-12-08 8715
edd163687ea59f0 Stephen M. Cameron 2009-12-08 8716 /* make sure the board interrupts are off */
edd163687ea59f0 Stephen M. Cameron 2009-12-08 @8717 h->access.set_intr_mask(h, HPSA_INTR_OFF);
10f66018088fd0c Stephen M. Cameron 2010-06-16 8718

105a3dbc74522c2 Robert Elliott     2015-04-23 @8719  	rc = hpsa_request_irqs(h, do_hpsa_intr_msi, do_hpsa_intr_intx);
105a3dbc74522c2 Robert Elliott     2015-04-23 @8720  	if (rc)
2946e82bdd76568 Robert Elliott     2015-04-23  8721  		goto clean3;	/* shost, pci, lu, aer/h */
d37ffbe4d52d4e7 Robert Elliott     2015-04-23 @8722  	rc = hpsa_alloc_cmd_pool(h);
8947fd10865db32 Robert Elliott     2015-01-23  8723  	if (rc)
2946e82bdd76568 Robert Elliott     2015-04-23  8724  		goto clean4;	/* irq, shost, pci, lu, aer/h */
105a3dbc74522c2 Robert Elliott     2015-04-23  8725  	rc = hpsa_alloc_sg_chain_blocks(h);
105a3dbc74522c2 Robert Elliott     2015-04-23  8726  	if (rc)
2946e82bdd76568 Robert Elliott     2015-04-23  8727  		goto clean5;	/* cmd, irq, shost, pci, lu, aer/h */
a08a8471b7aed3d Stephen M. Cameron 2010-02-04  8728  	init_waitqueue_head(&h->scan_wait_queue);
d604f5336aee7e6 Webb Scales        2015-04-23  8729  	init_waitqueue_head(&h->event_sync_wait_queue);
d604f5336aee7e6 Webb Scales        2015-04-23  8730  	mutex_init(&h->reset_mutex);
a08a8471b7aed3d Stephen M. Cameron 2010-02-04  8731  	h->scan_finished = 1; /* no scan currently in progress */
87b9e6aa87d9411 Don Brace          2017-03-10  8732  	h->scan_waiting = 0;
edd163687ea59f0 Stephen M. Cameron 2009-12-08  8733  
edd163687ea59f0 Stephen M. Cameron 2009-12-08 @8734  	pci_set_drvdata(pdev, h);
9a41338e5b474ad Stephen M. Cameron 2011-05-03  8735  	h->ndevices = 0;
2946e82bdd76568 Robert Elliott     2015-04-23  8736  
9a41338e5b474ad Stephen M. Cameron 2011-05-03  8737  	spin_lock_init(&h->devlock);
105a3dbc74522c2 Robert Elliott     2015-04-23  8738  	rc = hpsa_put_ctlr_into_performant_mode(h);
105a3dbc74522c2 Robert Elliott     2015-04-23  8739  	if (rc)
2946e82bdd76568 Robert Elliott     2015-04-23  8740  		goto clean6; /* sg, cmd, irq, shost, pci, lu, aer/h */
2946e82bdd76568 Robert Elliott     2015-04-23  8741  
2efa5929cb44826 Robert Elliott     2015-04-23  8742  	/* create the resubmit workqueue */
2efa5929cb44826 Robert Elliott     2015-04-23  8743  	h->rescan_ctlr_wq = hpsa_create_controller_wq(h, "rescan");
2efa5929cb44826 Robert Elliott     2015-04-23  8744  	if (!h->rescan_ctlr_wq) {
2efa5929cb44826 Robert Elliott     2015-04-23  8745  		rc = -ENOMEM;
2efa5929cb44826 Robert Elliott     2015-04-23  8746  		goto clean7;
2efa5929cb44826 Robert Elliott     2015-04-23  8747  	}
2efa5929cb44826 Robert Elliott     2015-04-23  8748  
2efa5929cb44826 Robert Elliott     2015-04-23  8749  	h->resubmit_wq = hpsa_create_controller_wq(h, "resubmit");
2efa5929cb44826 Robert Elliott     2015-04-23  8750  	if (!h->resubmit_wq) {
2efa5929cb44826 Robert Elliott     2015-04-23  8751  		rc = -ENOMEM;
2efa5929cb44826 Robert Elliott     2015-04-23  8752  		goto clean7;	/* aer/h */
2efa5929cb44826 Robert Elliott     2015-04-23  8753  	}
64670ac8702ec37 Stephen M. Cameron 2011-05-03  8754  
0119208885b3faf Don Brace          2019-05-07  8755  	h->monitor_ctlr_wq = hpsa_create_controller_wq(h, "monitor");
0119208885b3faf Don Brace          2019-05-07  8756  	if (!h->monitor_ctlr_wq) {
0119208885b3faf Don Brace          2019-05-07  8757  		rc = -ENOMEM;
0119208885b3faf Don Brace          2019-05-07  8758  		goto clean7;
0119208885b3faf Don Brace          2019-05-07  8759  	}
0119208885b3faf Don Brace          2019-05-07  8760  
105a3dbc74522c2 Robert Elliott     2015-04-23  8761  	/*
105a3dbc74522c2 Robert Elliott     2015-04-23  8762  	 * At this point, the controller is ready to take commands.
64670ac8702ec37 Stephen M. Cameron 2011-05-03  8763  	 * Now, if reset_devices and the hard reset didn't work, try
64670ac8702ec37 Stephen M. Cameron 2011-05-03  8764  	 * the soft reset and see if that works.
64670ac8702ec37 Stephen M. Cameron 2011-05-03  8765  	 */
64670ac8702ec37 Stephen M. Cameron 2011-05-03  8766  	if (try_soft_reset) {
64670ac8702ec37 Stephen M. Cameron 2011-05-03  8767  
64670ac8702ec37 Stephen M. Cameron 2011-05-03  8768  		/* This is kind of gross.  We may or may not get a completion
64670ac8702ec37 Stephen M. Cameron 2011-05-03  8769  		 * from the soft reset command, and if we do, then the value
64670ac8702ec37 Stephen M. Cameron 2011-05-03  8770  		 * from the fifo may or may not be valid.  So, we wait 10 secs
64670ac8702ec37 Stephen M. Cameron 2011-05-03  8771  		 * after the reset throwing away any completions we get during
64670ac8702ec37 Stephen M. Cameron 2011-05-03  8772  		 * that time.  Unregister the interrupt handler and register
64670ac8702ec37 Stephen M. Cameron 2011-05-03  8773  		 * fake ones to scoop up any residual completions.
64670ac8702ec37 Stephen M. Cameron 2011-05-03  8774  		 */
64670ac8702ec37 Stephen M. Cameron 2011-05-03  8775  		spin_lock_irqsave(&h->lock, flags);
64670ac8702ec37 Stephen M. Cameron 2011-05-03  8776  		h->access.set_intr_mask(h, HPSA_INTR_OFF);
64670ac8702ec37 Stephen M. Cameron 2011-05-03  8777  		spin_unlock_irqrestore(&h->lock, flags);
ec501a18637d04a Robert Elliott     2015-01-23  8778  		hpsa_free_irqs(h);
9ee61794879dad6 Robert Elliott     2015-01-23  8779  		rc = hpsa_request_irqs(h, hpsa_msix_discard_completions,
64670ac8702ec37 Stephen M. Cameron 2011-05-03  8780  					hpsa_intx_discard_completions);
64670ac8702ec37 Stephen M. Cameron 2011-05-03  8781  		if (rc) {
9ee61794879dad6 Robert Elliott     2015-01-23  8782  			dev_warn(&h->pdev->dev,
9ee61794879dad6 Robert Elliott     2015-01-23  8783  				"Failed to request_irq after soft reset.\n");
d498757c5efd41d Robert Elliott     2015-04-23  8784  			/*
b2ef480c4b6548e Robert Elliott     2015-04-23  8785  			 * cannot goto clean7 or free_irqs will be called
b2ef480c4b6548e Robert Elliott     2015-04-23  8786  			 * again. Instead, do its work
b2ef480c4b6548e Robert Elliott     2015-04-23  8787  			 */
b2ef480c4b6548e Robert Elliott     2015-04-23  8788  			hpsa_free_performant_mode(h);	/* clean7 */
b2ef480c4b6548e Robert Elliott     2015-04-23  8789  			hpsa_free_sg_chain_blocks(h);	/* clean6 */
b2ef480c4b6548e Robert Elliott     2015-04-23  8790  			hpsa_free_cmd_pool(h);		/* clean5 */
b2ef480c4b6548e Robert Elliott     2015-04-23  8791  			/*
b2ef480c4b6548e Robert Elliott     2015-04-23  8792  			 * skip hpsa_free_irqs(h) clean4 since that
b2ef480c4b6548e Robert Elliott     2015-04-23  8793  			 * was just called before request_irqs failed
d498757c5efd41d Robert Elliott     2015-04-23  8794  			 */
d498757c5efd41d Robert Elliott     2015-04-23  8795  			goto clean3;
64670ac8702ec37 Stephen M. Cameron 2011-05-03  8796  		}
64670ac8702ec37 Stephen M. Cameron 2011-05-03  8797  
64670ac8702ec37 Stephen M. Cameron 2011-05-03  8798  		rc = hpsa_kdump_soft_reset(h);
64670ac8702ec37 Stephen M. Cameron 2011-05-03  8799  		if (rc)
64670ac8702ec37 Stephen M. Cameron 2011-05-03  8800  			/* Neither hard nor soft reset worked, we're hosed. */
7ef7323f4bf467c Don Brace          2015-07-18  8801  			goto clean7;
64670ac8702ec37 Stephen M. Cameron 2011-05-03  8802  
64670ac8702ec37 Stephen M. Cameron 2011-05-03  8803  		dev_info(&h->pdev->dev, "Board READY.\n");
64670ac8702ec37 Stephen M. Cameron 2011-05-03  8804  		dev_info(&h->pdev->dev,
64670ac8702ec37 Stephen M. Cameron 2011-05-03  8805  			"Waiting for stale completions to drain.\n");
64670ac8702ec37 Stephen M. Cameron 2011-05-03  8806  		h->access.set_intr_mask(h, HPSA_INTR_ON);
64670ac8702ec37 Stephen M. Cameron 2011-05-03  8807  		msleep(10000);
64670ac8702ec37 Stephen M. Cameron 2011-05-03  8808  		h->access.set_intr_mask(h, HPSA_INTR_OFF);
64670ac8702ec37 Stephen M. Cameron 2011-05-03  8809  
64670ac8702ec37 Stephen M. Cameron 2011-05-03  8810  		rc = controller_reset_failed(h->cfgtable);
64670ac8702ec37 Stephen M. Cameron 2011-05-03  8811  		if (rc)
64670ac8702ec37 Stephen M. Cameron 2011-05-03  8812  			dev_info(&h->pdev->dev,
64670ac8702ec37 Stephen M. Cameron 2011-05-03  8813  				"Soft reset appears to have failed.\n");
64670ac8702ec37 Stephen M. Cameron 2011-05-03  8814  
64670ac8702ec37 Stephen M. Cameron 2011-05-03  8815  		/* since the controller's reset, we have to go back and re-init
64670ac8702ec37 Stephen M. Cameron 2011-05-03  8816  		 * everything.  Easiest to just forget what we've done and do it
64670ac8702ec37 Stephen M. Cameron 2011-05-03  8817  		 * all over again.
64670ac8702ec37 Stephen M. Cameron 2011-05-03  8818  		 */
64670ac8702ec37 Stephen M. Cameron 2011-05-03  8819  		hpsa_undo_allocations_after_kdump_soft_reset(h);
64670ac8702ec37 Stephen M. Cameron 2011-05-03  8820  		try_soft_reset = 0;
64670ac8702ec37 Stephen M. Cameron 2011-05-03  8821  		if (rc)
b2ef480c4b6548e Robert Elliott     2015-04-23  8822  			/* don't goto clean, we already unallocated */
64670ac8702ec37 Stephen M. Cameron 2011-05-03  8823  			return -ENODEV;
64670ac8702ec37 Stephen M. Cameron 2011-05-03  8824  
64670ac8702ec37 Stephen M. Cameron 2011-05-03  8825  		goto reinit_after_soft_reset;
64670ac8702ec37 Stephen M. Cameron 2011-05-03  8826  	}
edd163687ea59f0 Stephen M. Cameron 2009-12-08  8827  
da0697bd3075598 Scott Teel         2014-02-18  8828  	/* Enable Accelerated IO path at driver layer */
da0697bd3075598 Scott Teel         2014-02-18  8829  	h->acciopath_status = 1;
34592254c13324a Scott Teel         2015-11-04  8830  	/* Disable discovery polling.*/
34592254c13324a Scott Teel         2015-11-04  8831  	h->discovery_polling = 0;
da0697bd3075598 Scott Teel         2014-02-18  8832  
e863d68e4881b08 Scott Teel         2014-02-18  8833  
edd163687ea59f0 Stephen M. Cameron 2009-12-08  8834  	/* Turn the interrupts on so we can service requests */
edd163687ea59f0 Stephen M. Cameron 2009-12-08  8835  	h->access.set_intr_mask(h, HPSA_INTR_ON);
edd163687ea59f0 Stephen M. Cameron 2009-12-08  8836  
339b2b14c634da5 Stephen M. Cameron 2010-02-04 @8837  	hpsa_hba_inquiry(h);
8a98db7386b5fed Stephen M. Cameron 2013-12-04  8838  
34592254c13324a Scott Teel         2015-11-04  8839  	h->lastlogicals = kzalloc(sizeof(*(h->lastlogicals)), GFP_KERNEL);
34592254c13324a Scott Teel         2015-11-04  8840  	if (!h->lastlogicals)
34592254c13324a Scott Teel         2015-11-04  8841  		dev_info(&h->pdev->dev,
34592254c13324a Scott Teel         2015-11-04  8842  			"Can't track change to report lun data\n");
34592254c13324a Scott Teel         2015-11-04  8843  
cf47723763a7235 Don Brace          2016-04-27  8844  	/* hook into SCSI subsystem */
cf47723763a7235 Don Brace          2016-04-27  8845  	rc = hpsa_scsi_add_host(h);
cf47723763a7235 Don Brace          2016-04-27  8846  	if (rc)
cf47723763a7235 Don Brace          2016-04-27  8847  		goto clean7; /* perf, sg, cmd, irq, shost, pci, lu, aer/h */
cf47723763a7235 Don Brace          2016-04-27  8848  
8a98db7386b5fed Stephen M. Cameron 2013-12-04  8849  	/* Monitor the controller for firmware lockups */
8a98db7386b5fed Stephen M. Cameron 2013-12-04  8850  	h->heartbeat_sample_interval = HEARTBEAT_SAMPLE_INTERVAL;
8a98db7386b5fed Stephen M. Cameron 2013-12-04  8851  	INIT_DELAYED_WORK(&h->monitor_ctlr_work, hpsa_monitor_ctlr_worker);
8a98db7386b5fed Stephen M. Cameron 2013-12-04 @8852  	schedule_delayed_work(&h->monitor_ctlr_work,
8a98db7386b5fed Stephen M. Cameron 2013-12-04 @8853  				h->heartbeat_sample_interval);
6636e7f455b33b9 Don Brace          2015-01-23  8854  	INIT_DELAYED_WORK(&h->rescan_ctlr_work, hpsa_rescan_ctlr_worker);
6636e7f455b33b9 Don Brace          2015-01-23 @8855  	queue_delayed_work(h->rescan_ctlr_wq, &h->rescan_ctlr_work,
6636e7f455b33b9 Don Brace          2015-01-23  8856  				h->heartbeat_sample_interval);
3d38f00c4107cc0 Scott Teel         2017-05-04  8857  	INIT_DELAYED_WORK(&h->event_monitor_work, hpsa_event_monitor_worker);
3d38f00c4107cc0 Scott Teel         2017-05-04  8858  	schedule_delayed_work(&h->event_monitor_work,
3d38f00c4107cc0 Scott Teel         2017-05-04  8859  				HPSA_EVENT_MONITOR_INTERVAL);
88bf6d62db4393f Stephen M. Cameron 2013-11-01 @8860  	return 0;
edd163687ea59f0 Stephen M. Cameron 2009-12-08  8861  
2946e82bdd76568 Robert Elliott     2015-04-23 @8862  clean7: /* perf, sg, cmd, irq, shost, pci, lu, aer/h */
105a3dbc74522c2 Robert Elliott     2015-04-23  8863  	hpsa_free_performant_mode(h);
105a3dbc74522c2 Robert Elliott     2015-04-23  8864  	h->access.set_intr_mask(h, HPSA_INTR_OFF);
105a3dbc74522c2 Robert Elliott     2015-04-23  8865  clean6: /* sg, cmd, irq, pci, lockup, wq/aer/h */
33a2ffce51d9598 Stephen M. Cameron 2010-02-25  8866  	hpsa_free_sg_chain_blocks(h);
2946e82bdd76568 Robert Elliott     2015-04-23  8867  clean5: /* cmd, irq, shost, pci, lu, aer/h */
2e9d1b3626c4383 Stephen M. Cameron 2011-05-03  8868  	hpsa_free_cmd_pool(h);
2946e82bdd76568 Robert Elliott     2015-04-23  8869  clean4: /* irq, shost, pci, lu, aer/h */
ec501a18637d04a Robert Elliott     2015-01-23  8870  	hpsa_free_irqs(h);
2946e82bdd76568 Robert Elliott     2015-04-23  8871  clean3: /* shost, pci, lu, aer/h */
2946e82bdd76568 Robert Elliott     2015-04-23  8872  	scsi_host_put(h->scsi_host);
2946e82bdd76568 Robert Elliott     2015-04-23  8873  	h->scsi_host = NULL;
2946e82bdd76568 Robert Elliott     2015-04-23  8874  clean2_5: /* pci, lu, aer/h */
195f2c65f99e047 Robert Elliott     2015-04-23  8875  	hpsa_free_pci_init(h);
2946e82bdd76568 Robert Elliott     2015-04-23  8876  clean2: /* lu, aer/h */
105a3dbc74522c2 Robert Elliott     2015-04-23  8877  	if (h->lockup_detected) {
105a3dbc74522c2 Robert Elliott     2015-04-23  8878  		free_percpu(h->lockup_detected);
105a3dbc74522c2 Robert Elliott     2015-04-23  8879  		h->lockup_detected = NULL;
105a3dbc74522c2 Robert Elliott     2015-04-23  8880  	}
105a3dbc74522c2 Robert Elliott     2015-04-23  8881  clean1:	/* wq/aer/h */
105a3dbc74522c2 Robert Elliott     2015-04-23  8882  	if (h->resubmit_wq) {
080ef1cc7fdf5d0 Don Brace          2015-01-23  8883  		destroy_workqueue(h->resubmit_wq);
105a3dbc74522c2 Robert Elliott     2015-04-23  8884  		h->resubmit_wq = NULL;
105a3dbc74522c2 Robert Elliott     2015-04-23  8885  	}
105a3dbc74522c2 Robert Elliott     2015-04-23  8886  	if (h->rescan_ctlr_wq) {
6636e7f455b33b9 Don Brace          2015-01-23  8887  		destroy_workqueue(h->rescan_ctlr_wq);
105a3dbc74522c2 Robert Elliott     2015-04-23  8888  		h->rescan_ctlr_wq = NULL;
105a3dbc74522c2 Robert Elliott     2015-04-23  8889  	}
0119208885b3faf Don Brace          2019-05-07  8890  	if (h->monitor_ctlr_wq) {
0119208885b3faf Don Brace          2019-05-07  8891  		destroy_workqueue(h->monitor_ctlr_wq);
0119208885b3faf Don Brace          2019-05-07  8892  		h->monitor_ctlr_wq = NULL;
0119208885b3faf Don Brace          2019-05-07  8893  	}
edd163687ea59f0 Stephen M. Cameron 2009-12-08 @8894  	kfree(h);
ecd9aad402765ab Stephen M. Cameron 2010-02-04  8895  	return rc;
edd163687ea59f0 Stephen M. Cameron 2009-12-08 @8896  }

edd163687ea59f0 Stephen M. Cameron 2009-12-08 8897

---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all(a)lists.01.org

author
#23 lore raw

PATCH v2 19/19 scsi: hpsa: Strip out a bunch of set but unused variables

In reply to Lee Jones

Fixes the following W=1 kernel build warning(s):

drivers/scsi/hpsa.c: In function ‘hpsa_volume_offline’:
drivers/scsi/hpsa.c:3885:5: warning: variable ‘scsi_status’ set but not used [-Wunused-but-set-variable] drivers/scsi/hpsa.c:3884:6: warning: variable ‘cmd_status’ set but not used [-Wunused-but-set-variable] drivers/scsi/hpsa.c: In function ‘hpsa_update_scsi_devices’:
drivers/scsi/hpsa.c:4354:9: warning: variable ‘n_ext_target_devs’ set but not used [-Wunused-but-set-variable] drivers/scsi/hpsa.c: In function ‘hpsa_scatter_gather’:
drivers/scsi/hpsa.c:4583:36: warning: variable ‘last_sg’ set but not used [-Wunused-but-set-variable] drivers/scsi/hpsa.c: In function ‘hpsa_init_one’:
drivers/scsi/hpsa.c:8639:6: warning: variable ‘dac’ set but not used [-Wunused-but-set-variable] drivers/scsi/hpsa.c: In function ‘hpsa_enter_performant_mode’:
drivers/scsi/hpsa.c:9300:7: warning: variable ‘rc’ set but not used [-Wunused-but-set-variable]

---

v2: Fix missing '{'

drivers/scsi/hpsa.c | 25 +++++++------------------

 1 file changed, 7 insertions(+), 18 deletions(-)
drivers/scsi/hpsa.c +7 -18
index 16fd378285d27..99562b6bb8ccf 100644
@@ -3881,8 +3881,6 @@ static unsigned char hpsa_volume_offline(struct ctlr_info *h,
 	u8 sense_key, asc, ascq;
 	int sense_len;
 	int rc, ldstat = 0;
-	u16 cmd_status;
-	u8 scsi_status;
 #define ASC_LUN_NOT_READY 0x04
 #define ASCQ_LUN_NOT_READY_FORMAT_IN_PROGRESS 0x04
 #define ASCQ_LUN_NOT_READY_INITIALIZING_CMD_REQ 0x02
@@ -3902,8 +3900,6 @@ static unsigned char hpsa_volume_offline(struct ctlr_info *h,
 	else
 		sense_len = c->err_info->SenseLen;
 	decode_sense_data(sense, sense_len, &sense_key, &asc, &ascq);
-	cmd_status = c->err_info->CommandStatus;
-	scsi_status = c->err_info->ScsiStatus;
 	cmd_free(h, c);
 
 	/* Determine the reason for not ready state */
@@ -4351,7 +4347,7 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h)
 	u32 ndev_allocated = 0;
 	struct hpsa_scsi_dev_t **currentsd, *this_device, *tmpdevice;
 	int ncurrent = 0;
-	int i, n_ext_target_devs, ndevs_to_allocate;
+	int i, ndevs_to_allocate;
 	int raid_ctlr_position;
 	bool physical_device;
 	DECLARE_BITMAP(lunzerobits, MAX_EXT_TARGETS);
@@ -4416,7 +4412,6 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h)
 		raid_ctlr_position = nphysicals + nlogicals;
 
 	/* adjust our table of devices */
-	n_ext_target_devs = 0;
 	for (i = 0; i < nphysicals + nlogicals + 1; i++) {
 		u8 *lunaddrbytes, is_OBDR = 0;
 		int rc = 0;
@@ -4580,7 +4575,7 @@ static int hpsa_scatter_gather(struct ctlr_info *h,
 		struct scsi_cmnd *cmd)
 {
 	struct scatterlist *sg;
-	int use_sg, i, sg_limit, chained, last_sg;
+	int use_sg, i, sg_limit, chained;
 	struct SGDescriptor *curr_sg;
 
 	BUG_ON(scsi_sg_count(cmd) > h->maxsgentries);
@@ -4602,7 +4597,6 @@ static int hpsa_scatter_gather(struct ctlr_info *h,
 	curr_sg = cp->SG;
 	chained = use_sg > h->max_cmd_sg_entries;
 	sg_limit = chained ? h->max_cmd_sg_entries - 1 : use_sg;
-	last_sg = scsi_sg_count(cmd) - 1;
 	scsi_for_each_sg(cmd, sg, sg_limit, i) {
 		hpsa_set_sg_descriptor(curr_sg, sg);
 		curr_sg++;
@@ -8635,7 +8629,7 @@ static struct ctlr_info *hpda_alloc_ctlr_info(void)
 
 static int hpsa_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 {
-	int dac, rc;
+	int rc;
 	struct ctlr_info *h;
 	int try_soft_reset = 0;
 	unsigned long flags;
@@ -8711,13 +8705,9 @@ static int hpsa_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	/* configure PCI DMA stuff */
 	rc = dma_set_mask(&pdev->dev, DMA_BIT_MASK(64));
-	if (rc == 0) {
-		dac = 1;
-	} else {
+	if (rc != 0) {
 		rc = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
-		if (rc == 0) {
-			dac = 0;
-		} else {
+		if (rc != 0) {
 			dev_err(&pdev->dev, "no suitable DMA available\n");
 			goto clean3;	/* shost, pci, lu, aer/h */
 		}
@@ -9298,10 +9288,9 @@ static int hpsa_enter_performant_mode(struct ctlr_info *h, u32 trans_support)
 	} else if (trans_support & CFGTBL_Trans_io_accel2) {
 		u64 cfg_offset, cfg_base_addr_index;
 		u32 bft2_offset, cfg_base_addr;
-		int rc;
 
-		rc = hpsa_find_cfg_addrs(h->pdev, h->vaddr, &cfg_base_addr,
-			&cfg_base_addr_index, &cfg_offset);
+		hpsa_find_cfg_addrs(h->pdev, h->vaddr, &cfg_base_addr,
+				    &cfg_base_addr_index, &cfg_offset);
 		BUILD_BUG_ON(offsetof(struct io_accel2_cmd, sg) != 64);
 		bft2[15] = h->ioaccel_maxsg + HPSA_IOACCEL2_HEADER_SZ;
 		calc_bucket_map(bft2, ARRAY_SIZE(bft2), h->ioaccel_maxsg,
Signature · 1 line
2.25.1
#24 lore raw

Re: [PATCH v2 19/19] scsi: hpsa: Strip out a bunch of set but unused variables

Lee,

Quoted 13 lines

Fixes the following W=1 kernel build warning(s):

drivers/scsi/hpsa.c: In function ‘hpsa_volume_offline’:
drivers/scsi/hpsa.c:3885:5: warning: variable ‘scsi_status’ set but not used [-Wunused-but-set-variable] drivers/scsi/hpsa.c:3884:6: warning: variable ‘cmd_status’ set but not used [-Wunused-but-set-variable] drivers/scsi/hpsa.c: In function ‘hpsa_update_scsi_devices’:
drivers/scsi/hpsa.c:4354:9: warning: variable ‘n_ext_target_devs’ set but not used [-Wunused-but-set-variable] drivers/scsi/hpsa.c: In function ‘hpsa_scatter_gather’:
drivers/scsi/hpsa.c:4583:36: warning: variable ‘last_sg’ set but not used [-Wunused-but-set-variable] drivers/scsi/hpsa.c: In function ‘hpsa_init_one’:
drivers/scsi/hpsa.c:8639:6: warning: variable ‘dac’ set but not used [-Wunused-but-set-variable] drivers/scsi/hpsa.c: In function ‘hpsa_enter_performant_mode’:
drivers/scsi/hpsa.c:9300:7: warning: variable ‘rc’ set but not used [-Wunused-but-set-variable]

Applied to 5.11/scsi-staging, thanks!

Signature · 1 line
Martin K. Petersen	Oracle Linux Engineering
#25 lore raw
In reply to Lee Jones

Lee,

Quoted 3 lines

This set is part of a larger effort attempting to clean-up W=1 kernel builds, which are currently overwhelmingly riddled with niggly little warnings.

Applied 1-18 to 5.11/scsi-staging, thanks! Patch 19 didn't build.

Signature · 1 line
Martin K. Petersen	Oracle Linux Engineering