virtiofsd: Announce submounts even without statx()
PATCH 1/1 virtiofsd: Announce submounts even without statx()
Contrary to what the check (and warning) in lo_init() claims, we can announce submounts just fine even without statx() -- the check is based on comparing both the mount ID and st_dev of parent and child. Without statx(), we will not have the mount ID; but we always have st_dev.
The only problems we have (without statx() and its mount ID) are:
(1) Mounting the same device twice may lead to both trees being treated as exactly the same tree by virtiofsd. But that is a problem that is completely independent of mirroring host submounts in the guest. Both submount roots will still show the FUSE_SUBMOUNT flag, because their st_dev still differs from their respective parent.
(2) There is only one exception to (1), and that is if you mount a device inside a mount of itself: Then, its st_dev will be the same as that of its parent, and so without a mount ID, virtiofsd will not be able to recognize the nested mount's root as a submount. However, thanks to virtiofsd then treating both trees as exactly the same tree, it will be caught up in a loop when the guest tries to examine the nested submount, so the guest will always see nothing but an ELOOP there. Therefore, this case is just fully broken without statx(), whether we check for submounts (based on st_dev) or not.
All in all, checking for submounts works well even without comparing the mount ID (i.e., without statx()). The only concern is an edge case that, without statx() mount IDs, is utterly broken anyway.
Thus, drop said check in lo_init().
--- tools/virtiofsd/passthrough_ll.c | 8 -------- 1 file changed, 8 deletions(-)
tools/virtiofsd/passthrough_ll.c +0 -8
@@ -610,14 +610,6 @@ static void lo_init(void *userdata, struct fuse_conn_info *conn) "does not support it\n"); lo->announce_submounts = false; } - -#ifndef CONFIG_STATX -if (lo->announce_submounts) { -fuse_log (FUSE_LOG_WARNING ,"lo_init: Cannot announce submounts, there " -"is no statx()\n" ); - lo->announce_submounts = false; - } -#endif } static void lo_getattr(fuse_req_t req, fuse_ino_t ino,
Signature · 1 line
2.26.2
Quoted 24 lines · * Max Reitz ([email protected]) wrote:
Contrary to what the check (and warning) in
lo_init()claims, we can announce submounts just fine even withoutstatx()-- the check is based on comparing both the mount ID andst_devof parent and child. Withoutstatx(), we will not have the mount ID; but we always havest_dev.The only problems we have (without
statx()and its mount ID) are:(1) Mounting the same device twice may lead to both trees being treated as exactly the same tree by virtiofsd. But that is a problem that is completely independent of mirroring host submounts in the guest. Both submount roots will still show the
FUSE_SUBMOUNTflag, because theirst_devstill differs from their respective parent.(2) There is only one exception to (1), and that is if you mount a device inside a mount of itself: Then, its
st_devwill be the same as that of its parent, and so without a mount ID, virtiofsd will not be able to recognize the nested mount's root as a submount. However, thanks to virtiofsd then treating both trees as exactly the same tree, it will be caught up in a loop when the guest tries to examine the nested submount, so the guest will always see nothing but an ELOOP there. Therefore, this case is just fully broken withoutstatx(), whether we check for submounts (based onst_dev) or not.
Quoted 8 lines
All in all, checking for submounts works well even without comparing the mount ID (i.e., without
statx()). The only concern is an edge case that, withoutstatx()mount IDs, is utterly broken anyway.Thus, drop said check in
lo_init().Reported-by Miklos Szeredi <[email protected]>Signed-off-by Max Reitz <[email protected]>
OK, that seems to have been the outcome of the discussion here:
https://lists.gnu.org/archive/html/qemu-devel/2020-11/msg00500.html
so
Quoted 26 lines
--- tools/virtiofsd/passthrough_ll.c | 8 -------- 1 file changed, 8 deletions(-)tools/virtiofsd/passthrough_ll.c +0
-8@@ -610,14 +610,6 @@ static void lo_init(void *userdata, struct fuse_conn_info *conn) "does not support it\n"); lo->announce_submounts = false; } - -#ifndef CONFIG_STATX -if (lo->announce_submounts) { -fuse_log (FUSE_LOG_WARNING ,"lo_init: Cannot announce submounts, there " -"is no statx()\n" ); - lo->announce_submounts = false; - } -#endif } static void lo_getattr(fuse_req_t req, fuse_ino_t ino,Signature · 1 line
2.26.2
Signature · 1 line
Dr. David Alan Gilbert / [email protected] / Manchester, UK
Quoted 29 lines · Dr. David Alan Gilbert
Quoted 28 lines · * Max Reitz ([email protected]) wrote:
Contrary to what the check (and warning) in
lo_init()claims, we can announce submounts just fine even withoutstatx()-- the check is based on comparing both the mount ID andst_devof parent and child. Withoutstatx(), we will not have the mount ID; but we always havest_dev.The only problems we have (without
statx()and its mount ID) are:(1) Mounting the same device twice may lead to both trees being treated as exactly the same tree by virtiofsd. But that is a problem that is completely independent of mirroring host submounts in the guest. Both submount roots will still show the
FUSE_SUBMOUNTflag, because theirst_devstill differs from their respective parent.(2) There is only one exception to (1), and that is if you mount a device inside a mount of itself: Then, its
st_devwill be the same as that of its parent, and so without a mount ID, virtiofsd will not be able to recognize the nested mount's root as a submount. However, thanks to virtiofsd then treating both trees as exactly the same tree, it will be caught up in a loop when the guest tries to examine the nested submount, so the guest will always see nothing but an ELOOP there. Therefore, this case is just fully broken withoutstatx(), whether we check for submounts (based onst_dev) or not.All in all, checking for submounts works well even without comparing the mount ID (i.e., without
statx()). The only concern is an edge case that, withoutstatx()mount IDs, is utterly broken anyway.
Quoted 7 lines
Quoted 4 lines
Thus, drop said check in
lo_init().Reported-by Miklos Szeredi <[email protected]>Signed-off-by Max Reitz <[email protected]>OK, that seems to have been the outcome of the discussion here:
https://lists.gnu.org/archive/html/qemu-devel/2020-11/msg00500.html
That’s right.
Quoted 4 lines
so
Reviewed-by Dr. David Alan Gilbert <[email protected]>
Thanks :)
Max
Quoted 24 lines · * Max Reitz ([email protected]) wrote:
Contrary to what the check (and warning) in
lo_init()claims, we can announce submounts just fine even withoutstatx()-- the check is based on comparing both the mount ID andst_devof parent and child. Withoutstatx(), we will not have the mount ID; but we always havest_dev.The only problems we have (without
statx()and its mount ID) are:(1) Mounting the same device twice may lead to both trees being treated as exactly the same tree by virtiofsd. But that is a problem that is completely independent of mirroring host submounts in the guest. Both submount roots will still show the
FUSE_SUBMOUNTflag, because theirst_devstill differs from their respective parent.(2) There is only one exception to (1), and that is if you mount a device inside a mount of itself: Then, its
st_devwill be the same as that of its parent, and so without a mount ID, virtiofsd will not be able to recognize the nested mount's root as a submount. However, thanks to virtiofsd then treating both trees as exactly the same tree, it will be caught up in a loop when the guest tries to examine the nested submount, so the guest will always see nothing but an ELOOP there. Therefore, this case is just fully broken withoutstatx(), whether we check for submounts (based onst_dev) or not.
Quoted 8 lines
All in all, checking for submounts works well even without comparing the mount ID (i.e., without
statx()). The only concern is an edge case that, withoutstatx()mount IDs, is utterly broken anyway.Thus, drop said check in
lo_init().Reported-by Miklos Szeredi <[email protected]>Signed-off-by Max Reitz <[email protected]>
Queued
Quoted 27 lines
--- tools/virtiofsd/passthrough_ll.c | 8 -------- 1 file changed, 8 deletions(-)tools/virtiofsd/passthrough_ll.c +0
-8@@ -610,14 +610,6 @@ static void lo_init(void *userdata, struct fuse_conn_info *conn) "does not support it\n"); lo->announce_submounts = false; } - -#ifndef CONFIG_STATX -if (lo->announce_submounts) { -fuse_log (FUSE_LOG_WARNING ,"lo_init: Cannot announce submounts, there " -"is no statx()\n" ); - lo->announce_submounts = false; - } -#endif } static void lo_getattr(fuse_req_t req, fuse_ino_t ino,Signature · 1 line
2.26.2
Signature · 1 line
Dr. David Alan Gilbert / [email protected] / Manchester, UK