Skip to contentSkip to conversation

selftests: net: bridge: add tests for MLDv2

PATCH Applied Nikolay Aleksandrov 2 participants 18 messages Nov 3, 2020 – Nov 5, 2020

Subsystems (5)
lore
Share & tools
lore

Nikolay Aleksandrov

author maintainer
#0 lore raw

cover selftests: net: bridge: add tests for MLDv2

From: Nikolay Aleksandrov <[email protected]>

Hi,
This is the second selftests patch-set for the new multicast functionality which adds tests for the bridge's MLDv2 support. The tests use full precooked packets which are sent via mausezahn and the resulting state after each test is checked for proper X,Y sets, (*,G) source list, source list entry timers, (S,G) existence and flags, packet forwarding and blocking, exclude group expiration and (*,G) auto-add. The first 3 patches factor out common functions which are used by IGMPv3 tests in lib.sh and add support for IPv6 test UDP packet, then patch 4 adds the first test with the initial MLDv2 setup.
The following new tests are added:
- base case: MLDv2 report ff02::cc is_include
- include -> allow report
- include -> is_include report
- include -> is_exclude report
- include -> to_exclude report
- exclude -> allow report
- exclude -> is_include report
- exclude -> is_exclude report
- exclude -> to_exclude report
- include -> block report
- exclude -> block report
- exclude timeout (move to include + entry deletion)
- S,G port entry automatic add to a *,G,exclude port

The variable names and set notation are the same as per RFC 3810, for more information check RFC 3810 sections 2.3 and 7.

Thanks,
Nik

Nikolay Aleksandrov (16):
selftests: net: bridge: factor out mcast_packet_test
selftests: net: lib: add support for IPv6 mcast packet test
selftests: net: bridge: factor out and rename sg state functions
selftests: net: bridge: add initial MLDv2 include test
selftests: net: bridge: add test for mldv2 inc -> allow report
selftests: net: bridge: add test for mldv2 inc -> is_include report
selftests: net: bridge: add test for mldv2 inc -> is_exclude report
selftests: net: bridge: add test for mldv2 inc -> to_exclude report
selftests: net: bridge: add test for mldv2 exc -> allow report
selftests: net: bridge: add test for mldv2 exc -> is_include report
selftests: net: bridge: add test for mldv2 exc -> is_exclude report
selftests: net: bridge: add test for mldv2 exc -> to_exclude report
selftests: net: bridge: add test for mldv2 inc -> block report
selftests: net: bridge: add test for mldv2 exc -> block report
selftests: net: bridge: add test for mldv2 exclude timeout
selftests: net: bridge: add test for mldv2 *,g auto-add

 .../selftests/net/forwarding/bridge_igmp.sh   | 211 ++-----
 .../selftests/net/forwarding/bridge_mld.sh    | 558 ++++++++++++++++++
 tools/testing/selftests/net/forwarding/lib.sh | 107 ++++
 3 files changed, 721 insertions(+), 155 deletions(-)
 create mode 100755 tools/testing/selftests/net/forwarding/bridge_mld.sh
Signature · 1 line
2.25.4
author maintainer
#1 lore raw

PATCH 1/16 selftests: net: bridge: factor out mcast_packet_test

From: Nikolay Aleksandrov <[email protected]>

Factor out mcast_packet_test into lib.sh so it can be later extended and reused by MLDv2 tests.

---
 .../selftests/net/forwarding/bridge_igmp.sh   | 32 -------------------
 tools/testing/selftests/net/forwarding/lib.sh | 32 +++++++++++++++++++
 2 files changed, 32 insertions(+), 32 deletions(-)
tools/testing/selftests/net/forwarding/bridge_igmp.sh +0 -32
index 0e71abdd7a03..50a48ce16ba1 100755
@@ -105,38 +105,6 @@ cleanup()
 	vrf_cleanup
 }
 
-# return 0 if the packet wasn't seen on host2_if or 1 if it was
-mcast_packet_test()
-{
-	local mac=$1
-	local src_ip=$2
-	local ip=$3
-	local host1_if=$4
-	local host2_if=$5
-	local seen=0
-
-	# Add an ACL on `host2_if` which will tell us whether the packet
-	# was received by it or not.
-	tc qdisc add dev $host2_if ingress
-	tc filter add dev $host2_if ingress protocol ip pref 1 handle 101 \
-		flower ip_proto udp dst_mac $mac action drop
-
-	$MZ $host1_if -c 1 -p 64 -b $mac -A $src_ip -B $ip -t udp "dp=4096,sp=2048" -q
-	sleep 1
-
-	tc -j -s filter show dev $host2_if ingress \
-		| jq -e ".[] | select(.options.handle == 101) \
-		| select(.options.actions[0].stats.packets == 1)" &> /dev/null
-	if [[ $? -eq 0 ]]; then
-		seen=1
-	fi
-
-	tc filter del dev $host2_if ingress protocol ip pref 1 handle 101 flower
-	tc qdisc del dev $host2_if ingress
-
-	return $seen
-}
-
 v2reportleave_test()
 {
 	RET=0
tools/testing/selftests/net/forwarding/lib.sh +32 -0
index 927f9ba49e08..bb3ccc6d2165 100644
@@ -1270,3 +1270,35 @@ tcpdump_show()
 {
 	tcpdump -e -n -r $capfile 2>&1
 }
+
+# return 0 if the packet wasn't seen on host2_if or 1 if it was
+mcast_packet_test()
+{
+	local mac=$1
+	local src_ip=$2
+	local ip=$3
+	local host1_if=$4
+	local host2_if=$5
+	local seen=0
+
+	# Add an ACL on `host2_if` which will tell us whether the packet
+	# was received by it or not.
+	tc qdisc add dev $host2_if ingress
+	tc filter add dev $host2_if ingress protocol ip pref 1 handle 101 \
+		flower ip_proto udp dst_mac $mac action drop
+
+	$MZ $host1_if -c 1 -p 64 -b $mac -A $src_ip -B $ip -t udp "dp=4096,sp=2048" -q
+	sleep 1
+
+	tc -j -s filter show dev $host2_if ingress \
+		| jq -e ".[] | select(.options.handle == 101) \
+		| select(.options.actions[0].stats.packets == 1)" &> /dev/null
+	if [[ $? -eq 0 ]]; then
+		seen=1
+	fi
+
+	tc filter del dev $host2_if ingress protocol ip pref 1 handle 101 flower
+	tc qdisc del dev $host2_if ingress
+
+	return $seen
+}
Signature · 1 line
2.25.4
author maintainer
#2 lore raw

PATCH 2/16 selftests: net: lib: add support for IPv6 mcast packet test

In reply to Nikolay Aleksandrov

From: Nikolay Aleksandrov <[email protected]>

In order to test an IPv6 multicast packet we need to pass different tc and mausezahn protocols only, so add a simple check for the destination address which decides if we should generate an IPv4 or IPv6 mcast packet.

---
 tools/testing/selftests/net/forwarding/lib.sh | 14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)
tools/testing/selftests/net/forwarding/lib.sh +11 -3
index bb3ccc6d2165..0a427b8a039d 100644
@@ -1280,14 +1280,22 @@ mcast_packet_test()
 	local host1_if=$4
 	local host2_if=$5
 	local seen=0
+	local tc_proto="ip"
+	local mz_v6arg=""
+
+	# basic check to see if we were passed an IPv4 address, if not assume IPv6
+	if [[ ! $ip =~ ^[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}$ ]]; then
+		tc_proto="ipv6"
+		mz_v6arg="-6"
+	fi
 
 	# Add an ACL on `host2_if` which will tell us whether the packet
 	# was received by it or not.
 	tc qdisc add dev $host2_if ingress
-	tc filter add dev $host2_if ingress protocol ip pref 1 handle 101 \
+	tc filter add dev $host2_if ingress protocol $tc_proto pref 1 handle 101 \
 		flower ip_proto udp dst_mac $mac action drop
 
-	$MZ $host1_if -c 1 -p 64 -b $mac -A $src_ip -B $ip -t udp "dp=4096,sp=2048" -q
+	$MZ $host1_if $mz_v6arg -c 1 -p 64 -b $mac -A $src_ip -B $ip -t udp "dp=4096,sp=2048" -q
 	sleep 1
 
 	tc -j -s filter show dev $host2_if ingress \
@@ -1297,7 +1305,7 @@ mcast_packet_test()
 		seen=1
 	fi
 
-	tc filter del dev $host2_if ingress protocol ip pref 1 handle 101 flower
+	tc filter del dev $host2_if ingress protocol $tc_proto pref 1 handle 101 flower
 	tc qdisc del dev $host2_if ingress
 
 	return $seen
Signature · 1 line
2.25.4
author maintainer
#3 lore raw

PATCH 3/16 selftests: net: bridge: factor out and rename sg state functions

In reply to Nikolay Aleksandrov

From: Nikolay Aleksandrov <[email protected]>

Factor out S,G entry state checking functions for existence, forwarding, blocking and timer to lib.sh so they can be later used by MLDv2 tests. Add brmcast_ suffix to their name to make the relation to the bridge explicit.

---
 .../selftests/net/forwarding/bridge_igmp.sh   | 179 ++++++------------
 tools/testing/selftests/net/forwarding/lib.sh |  67 +++++++
 2 files changed, 123 insertions(+), 123 deletions(-)
tools/testing/selftests/net/forwarding/bridge_igmp.sh +56 -123
index 50a48ce16ba1..675eff45b037 100755
@@ -137,73 +137,6 @@ v2reportleave_test()
 	log_test "IGMPv2 leave $TEST_GROUP"
 }
 
-check_sg_entries()
-{
-	local report=$1; shift
-	local slist=("$@")
-	local sarg=""
-
-	for src in "${slist[@]}"; do
-		sarg="${sarg} and .source_list[].address == \"$src\""
-	done
-	bridge -j -d -s mdb show dev br0 \
-		| jq -e ".[].mdb[] | \
-			 select(.grp == \"$TEST_GROUP\" and .source_list != null $sarg)" &>/dev/null
-	check_err $? "Wrong *,G entry source list after $report report"
-
-	for sgent in "${slist[@]}"; do
-		bridge -j -d -s mdb show dev br0 \
-			| jq -e ".[].mdb[] | \
-				 select(.grp == \"$TEST_GROUP\" and .src == \"$sgent\")" &>/dev/null
-		check_err $? "Missing S,G entry ($sgent, $TEST_GROUP)"
-	done
-}
-
-check_sg_fwding()
-{
-	local should_fwd=$1; shift
-	local sources=("$@")
-
-	for src in "${sources[@]}"; do
-		local retval=0
-
-		mcast_packet_test $TEST_GROUP_MAC $src $TEST_GROUP $h2 $h1
-		retval=$?
-		if [ $should_fwd -eq 1 ]; then
-			check_fail $retval "Didn't forward traffic from S,G ($src, $TEST_GROUP)"
-		else
-			check_err $retval "Forwarded traffic for blocked S,G ($src, $TEST_GROUP)"
-		fi
-	done
-}
-
-check_sg_state()
-{
-	local is_blocked=$1; shift
-	local sources=("$@")
-	local should_fail=1
-
-	if [ $is_blocked -eq 1 ]; then
-		should_fail=0
-	fi
-
-	for src in "${sources[@]}"; do
-		bridge -j -d -s mdb show dev br0 \
-			| jq -e ".[].mdb[] | \
-				 select(.grp == \"$TEST_GROUP\" and .source_list != null) |
-				 .source_list[] |
-				 select(.address == \"$src\") |
-				 select(.timer == \"0.00\")" &>/dev/null
-		check_err_fail $should_fail $? "Entry $src has zero timer"
-
-		bridge -j -d -s mdb show dev br0 \
-			| jq -e ".[].mdb[] | \
-				 select(.grp == \"$TEST_GROUP\" and .src == \"$src\" and \
-				 .flags[] == \"blocked\")" &>/dev/null
-		check_err_fail $should_fail $? "Entry $src has blocked flag"
-	done
-}
-
 v3include_prepare()
 {
 	local host1_if=$1
@@ -225,7 +158,7 @@ v3include_prepare()
 			 select(.grp == \"$TEST_GROUP\" and \
 				.source_list != null and .filter_mode == \"include\")" &>/dev/null
 	check_err $? "Wrong *,G entry filter mode"
-	check_sg_entries "is_include" "${X[@]}"
+	brmcast_check_sg_entries "is_include" "${X[@]}"
 }
 
 v3exclude_prepare()
@@ -247,10 +180,10 @@ v3exclude_prepare()
 				.source_list != null and .filter_mode == \"exclude\")" &>/dev/null
 	check_err $? "Wrong *,G entry filter mode"
 
-	check_sg_entries "is_exclude" "${X[@]}" "${Y[@]}"
+	brmcast_check_sg_entries "is_exclude" "${X[@]}" "${Y[@]}"
 
-	check_sg_state 0 "${X[@]}"
-	check_sg_state 1 "${Y[@]}"
+	brmcast_check_sg_state 0 "${X[@]}"
+	brmcast_check_sg_state 1 "${Y[@]}"
 
 	bridge -j -d -s mdb show dev br0 \
 		| jq -e ".[].mdb[] | \
@@ -276,10 +209,10 @@ v3include_test()
 
 	v3include_prepare $h1 $ALL_MAC $ALL_GROUP
 
-	check_sg_state 0 "${X[@]}"
+	brmcast_check_sg_state 0 "${X[@]}"
 
-	check_sg_fwding 1 "${X[@]}"
-	check_sg_fwding 0 "192.0.2.100"
+	brmcast_check_sg_fwding 1 "${X[@]}"
+	brmcast_check_sg_fwding 0 "192.0.2.100"
 
 	log_test "IGMPv3 report $TEST_GROUP is_include"
 
@@ -295,12 +228,12 @@ v3inc_allow_test()
 
 	$MZ $h1 -c 1 -b $ALL_MAC -B $ALL_GROUP -t ip "proto=2,p=$MZPKT_ALLOW" -q
 	sleep 1
-	check_sg_entries "allow" "${X[@]}"
+	brmcast_check_sg_entries "allow" "${X[@]}"
 
-	check_sg_state 0 "${X[@]}"
+	brmcast_check_sg_state 0 "${X[@]}"
 
-	check_sg_fwding 1 "${X[@]}"
-	check_sg_fwding 0 "192.0.2.100"
+	brmcast_check_sg_fwding 1 "${X[@]}"
+	brmcast_check_sg_fwding 0 "192.0.2.100"
 
 	log_test "IGMPv3 report $TEST_GROUP include -> allow"
 
@@ -316,12 +249,12 @@ v3inc_is_include_test()
 
 	$MZ $h1 -c 1 -b $ALL_MAC -B $ALL_GROUP -t ip "proto=2,p=$MZPKT_IS_INC2" -q
 	sleep 1
-	check_sg_entries "is_include" "${X[@]}"
+	brmcast_check_sg_entries "is_include" "${X[@]}"
 
-	check_sg_state 0 "${X[@]}"
+	brmcast_check_sg_state 0 "${X[@]}"
 
-	check_sg_fwding 1 "${X[@]}"
-	check_sg_fwding 0 "192.0.2.100"
+	brmcast_check_sg_fwding 1 "${X[@]}"
+	brmcast_check_sg_fwding 0 "192.0.2.100"
 
 	log_test "IGMPv3 report $TEST_GROUP include -> is_include"
 
@@ -334,8 +267,8 @@ v3inc_is_exclude_test()
 
 	v3exclude_prepare $h1 $ALL_MAC $ALL_GROUP
 
-	check_sg_fwding 1 "${X[@]}" 192.0.2.100
-	check_sg_fwding 0 "${Y[@]}"
+	brmcast_check_sg_fwding 1 "${X[@]}" 192.0.2.100
+	brmcast_check_sg_fwding 0 "${Y[@]}"
 
 	log_test "IGMPv3 report $TEST_GROUP include -> is_exclude"
 
@@ -361,10 +294,10 @@ v3inc_to_exclude_test()
 				.source_list != null and .filter_mode == \"exclude\")" &>/dev/null
 	check_err $? "Wrong *,G entry filter mode"
 
-	check_sg_entries "to_exclude" "${X[@]}" "${Y[@]}"
+	brmcast_check_sg_entries "to_exclude" "${X[@]}" "${Y[@]}"
 
-	check_sg_state 0 "${X[@]}"
-	check_sg_state 1 "${Y[@]}"
+	brmcast_check_sg_state 0 "${X[@]}"
+	brmcast_check_sg_state 1 "${Y[@]}"
 
 	bridge -j -d -s mdb show dev br0 \
 		| jq -e ".[].mdb[] | \
@@ -379,8 +312,8 @@ v3inc_to_exclude_test()
 				.source_list[].address == \"192.0.2.21\")" &>/dev/null
 	check_fail $? "Wrong *,G entry source list, 192.0.2.21 entry still exists"
 
-	check_sg_fwding 1 "${X[@]}" 192.0.2.100
-	check_sg_fwding 0 "${Y[@]}"
+	brmcast_check_sg_fwding 1 "${X[@]}" 192.0.2.100
+	brmcast_check_sg_fwding 0 "${Y[@]}"
 
 	log_test "IGMPv3 report $TEST_GROUP include -> to_exclude"
 
@@ -399,13 +332,13 @@ v3exc_allow_test()
 
 	$MZ $h1 -c 1 -b $ALL_MAC -B $ALL_GROUP -t ip "proto=2,p=$MZPKT_ALLOW2" -q
 	sleep 1
-	check_sg_entries "allow" "${X[@]}" "${Y[@]}"
+	brmcast_check_sg_entries "allow" "${X[@]}" "${Y[@]}"
 
-	check_sg_state 0 "${X[@]}"
-	check_sg_state 1 "${Y[@]}"
+	brmcast_check_sg_state 0 "${X[@]}"
+	brmcast_check_sg_state 1 "${Y[@]}"
 
-	check_sg_fwding 1 "${X[@]}" 192.0.2.100
-	check_sg_fwding 0 "${Y[@]}"
+	brmcast_check_sg_fwding 1 "${X[@]}" 192.0.2.100
+	brmcast_check_sg_fwding 0 "${Y[@]}"
 
 	log_test "IGMPv3 report $TEST_GROUP exclude -> allow"
 
@@ -422,13 +355,13 @@ v3exc_is_include_test()
 
 	$MZ $h1 -c 1 -b $ALL_MAC -B $ALL_GROUP -t ip "proto=2,p=$MZPKT_IS_INC3" -q
 	sleep 1
-	check_sg_entries "is_include" "${X[@]}" "${Y[@]}"
+	brmcast_check_sg_entries "is_include" "${X[@]}" "${Y[@]}"
 
-	check_sg_state 0 "${X[@]}"
-	check_sg_state 1 "${Y[@]}"
+	brmcast_check_sg_state 0 "${X[@]}"
+	brmcast_check_sg_state 1 "${Y[@]}"
 
-	check_sg_fwding 1 "${X[@]}" 192.0.2.100
-	check_sg_fwding 0 "${Y[@]}"
+	brmcast_check_sg_fwding 1 "${X[@]}" 192.0.2.100
+	brmcast_check_sg_fwding 0 "${Y[@]}"
 
 	log_test "IGMPv3 report $TEST_GROUP exclude -> is_include"
 
@@ -445,13 +378,13 @@ v3exc_is_exclude_test()
 
 	$MZ $h1 -c 1 -b $ALL_MAC -B $ALL_GROUP -t ip "proto=2,p=$MZPKT_IS_EXC2" -q
 	sleep 1
-	check_sg_entries "is_exclude" "${X[@]}" "${Y[@]}"
+	brmcast_check_sg_entries "is_exclude" "${X[@]}" "${Y[@]}"
 
-	check_sg_state 0 "${X[@]}"
-	check_sg_state 1 "${Y[@]}"
+	brmcast_check_sg_state 0 "${X[@]}"
+	brmcast_check_sg_state 1 "${Y[@]}"
 
-	check_sg_fwding 1 "${X[@]}" 192.0.2.100
-	check_sg_fwding 0 "${Y[@]}"
+	brmcast_check_sg_fwding 1 "${X[@]}" 192.0.2.100
+	brmcast_check_sg_fwding 0 "${Y[@]}"
 
 	log_test "IGMPv3 report $TEST_GROUP exclude -> is_exclude"
 
@@ -471,13 +404,13 @@ v3exc_to_exclude_test()
 
 	$MZ $h1 -c 1 -b $ALL_MAC -B $ALL_GROUP -t ip "proto=2,p=$MZPKT_TO_EXC" -q
 	sleep 1
-	check_sg_entries "to_exclude" "${X[@]}" "${Y[@]}"
+	brmcast_check_sg_entries "to_exclude" "${X[@]}" "${Y[@]}"
 
-	check_sg_state 0 "${X[@]}"
-	check_sg_state 1 "${Y[@]}"
+	brmcast_check_sg_state 0 "${X[@]}"
+	brmcast_check_sg_state 1 "${Y[@]}"
 
-	check_sg_fwding 1 "${X[@]}" 192.0.2.100
-	check_sg_fwding 0 "${Y[@]}"
+	brmcast_check_sg_fwding 1 "${X[@]}" 192.0.2.100
+	brmcast_check_sg_fwding 0 "${Y[@]}"
 
 	log_test "IGMPv3 report $TEST_GROUP exclude -> to_exclude"
 
@@ -496,9 +429,9 @@ v3inc_block_test()
 	$MZ $h1 -c 1 -b $ALL_MAC -B $ALL_GROUP -t ip "proto=2,p=$MZPKT_BLOCK" -q
 	# make sure the lowered timers have expired (by default 2 seconds)
 	sleep 3
-	check_sg_entries "block" "${X[@]}"
+	brmcast_check_sg_entries "block" "${X[@]}"
 
-	check_sg_state 0 "${X[@]}"
+	brmcast_check_sg_state 0 "${X[@]}"
 
 	bridge -j -d -s mdb show dev br0 \
 		| jq -e ".[].mdb[] | \
@@ -507,8 +440,8 @@ v3inc_block_test()
 				.source_list[].address == \"192.0.2.1\")" &>/dev/null
 	check_fail $? "Wrong *,G entry source list, 192.0.2.1 entry still exists"
 
-	check_sg_fwding 1 "${X[@]}"
-	check_sg_fwding 0 "192.0.2.100"
+	brmcast_check_sg_fwding 1 "${X[@]}"
+	brmcast_check_sg_fwding 0 "192.0.2.100"
 
 	log_test "IGMPv3 report $TEST_GROUP include -> block"
 
@@ -528,13 +461,13 @@ v3exc_block_test()
 
 	$MZ $h1 -c 1 -b $ALL_MAC -B $ALL_GROUP -t ip "proto=2,p=$MZPKT_BLOCK" -q
 	sleep 1
-	check_sg_entries "block" "${X[@]}" "${Y[@]}"
+	brmcast_check_sg_entries "block" "${X[@]}" "${Y[@]}"
 
-	check_sg_state 0 "${X[@]}"
-	check_sg_state 1 "${Y[@]}"
+	brmcast_check_sg_state 0 "${X[@]}"
+	brmcast_check_sg_state 1 "${Y[@]}"
 
-	check_sg_fwding 1 "${X[@]}" 192.0.2.100
-	check_sg_fwding 0 "${Y[@]}"
+	brmcast_check_sg_fwding 1 "${X[@]}" 192.0.2.100
+	brmcast_check_sg_fwding 0 "${Y[@]}"
 
 	log_test "IGMPv3 report $TEST_GROUP exclude -> block"
 
@@ -574,12 +507,12 @@ v3exc_timeout_test()
 				.source_list[].address == \"192.0.2.2\")" &>/dev/null
 	check_fail $? "Wrong *,G entry source list, 192.0.2.2 entry still exists"
 
-	check_sg_entries "allow" "${X[@]}"
+	brmcast_check_sg_entries "allow" "${X[@]}"
 
-	check_sg_state 0 "${X[@]}"
+	brmcast_check_sg_state 0 "${X[@]}"
 
-	check_sg_fwding 1 "${X[@]}"
-	check_sg_fwding 0 192.0.2.100
+	brmcast_check_sg_fwding 1 "${X[@]}"
+	brmcast_check_sg_fwding 0 192.0.2.100
 
 	log_test "IGMPv3 group $TEST_GROUP exclude timeout"
 
@@ -610,7 +543,7 @@ v3star_ex_auto_add_test()
 				.flags[] == \"added_by_star_ex\")" &>/dev/null
 	check_err $? "Auto-added S,G entry doesn't have added_by_star_ex flag"
 
-	check_sg_fwding 1 192.0.2.3
+	brmcast_check_sg_fwding 1 192.0.2.3
 
 	log_test "IGMPv3 S,G port entry automatic add to a *,G port"
 
tools/testing/selftests/net/forwarding/lib.sh +67 -0

70 lines not on this page · raw message

Signature · 1 line
2.25.4
author maintainer
#4 lore raw

PATCH 4/16 selftests: net: bridge: add initial MLDv2 include test

In reply to Nikolay Aleksandrov

From: Nikolay Aleksandrov <[email protected]>

Add the initial setup for MLDv2 tests with the first test of a simple is_include report. For MLDv2 we need to setup the bridge properly and we also send the full precooked packets instead of relying on mausezahn to fill in some parts. For verification we use the generic S,G state checking functions from lib.sh.

---
 .../selftests/net/forwarding/bridge_mld.sh    | 146 ++++++++++++++++++
 1 file changed, 146 insertions(+)
 create mode 100755 tools/testing/selftests/net/forwarding/bridge_mld.sh
tools/testing/selftests/net/forwarding/bridge_mld.sh new file +146 -0
new file mode 100755
index 000000000000..3d0d579e4e03
@@ -0,0 +1,146 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+ALL_TESTS="mldv2include_test"
+NUM_NETIFS=4
+CHECK_TC="yes"
+TEST_GROUP="ff02::cc"
+TEST_GROUP_MAC="33:33:00:00:00:cc"
+
+# MLDv2 is_in report: grp ff02::cc is_include 2001:db8:1::1,2001:db8:1::2,2001:db8:1::3
+MZPKT_IS_INC="33:33:00:00:00:01:fe:54:00:04:5e:ba:86:dd:60:0a:2d:ae:00:54:00:01:fe:80:00:\
+00:00:00:00:00:fc:54:00:ff:fe:04:5e:ba:ff:02:00:00:00:00:00:00:00:00:00:00:00:00:00:01:3a:\
+00:05:02:00:00:00:00:8f:00:8e:d9:00:00:00:01:01:00:00:03:ff:02:00:00:00:00:00:00:00:00:00:\
+00:00:00:00:cc:20:01:0d:b8:00:01:00:00:00:00:00:00:00:00:00:01:20:01:0d:b8:00:01:00:00:00:\
+00:00:00:00:00:00:02:20:01:0d:b8:00:01:00:00:00:00:00:00:00:00:00:03"
+
+source lib.sh
+
+h1_create()
+{
+	simple_if_init $h1 2001:db8:1::1/64
+}
+
+h1_destroy()
+{
+	simple_if_fini $h1 2001:db8:1::1/64
+}
+
+h2_create()
+{
+	simple_if_init $h2 2001:db8:1::2/64
+}
+
+h2_destroy()
+{
+	simple_if_fini $h2 2001:db8:1::2/64
+}
+
+switch_create()
+{
+	ip link add dev br0 type bridge mcast_snooping 1 mcast_query_response_interval 100 \
+					mcast_mld_version 2 mcast_startup_query_interval 300 \
+					mcast_querier 1
+
+	ip link set dev $swp1 master br0
+	ip link set dev $swp2 master br0
+
+	ip link set dev br0 up
+	ip link set dev $swp1 up
+	ip link set dev $swp2 up
+
+	# make sure a query has been generated
+	sleep 5
+}
+
+switch_destroy()
+{
+	ip link set dev $swp2 down
+	ip link set dev $swp1 down
+
+	ip link del dev br0
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	vrf_prepare
+
+	h1_create
+	h2_create
+
+	switch_create
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	switch_destroy
+
+	h2_destroy
+	h1_destroy
+
+	vrf_cleanup
+}
+
+mldv2include_prepare()
+{
+	local host1_if=$1
+	local X=("2001:db8:1::1" "2001:db8:1::2" "2001:db8:1::3")
+
+	ip link set dev br0 type bridge mcast_mld_version 2
+	check_err $? "Could not change bridge MLD version to 2"
+
+	$MZ $host1_if $MZPKT_IS_INC -q
+	sleep 1
+	bridge -j -d -s mdb show dev br0 \
+		| jq -e ".[].mdb[] | \
+			 select(.grp == \"$TEST_GROUP\" and .source_list != null)" &>/dev/null
+	check_err $? "Missing *,G entry with source list"
+	bridge -j -d -s mdb show dev br0 \
+		| jq -e ".[].mdb[] | \
+			 select(.grp == \"$TEST_GROUP\" and \
+				.source_list != null and .filter_mode == \"include\")" &>/dev/null
+	check_err $? "Wrong *,G entry filter mode"
+	brmcast_check_sg_entries "is_include" "${X[@]}"
+}
+
+mldv2cleanup()
+{
+	local port=$1
+
+	bridge mdb del dev br0 port $port grp $TEST_GROUP
+	ip link set dev br0 type bridge mcast_mld_version 1
+}
+
+mldv2include_test()
+{
+	RET=0
+	local X=("2001:db8:1::1" "2001:db8:1::2" "2001:db8:1::3")
+
+	mldv2include_prepare $h1
+
+	brmcast_check_sg_state 0 "${X[@]}"
+
+	brmcast_check_sg_fwding 1 "${X[@]}"
+	brmcast_check_sg_fwding 0 "2001:db8:1::100"
+
+	log_test "MLDv2 report $TEST_GROUP is_include"
+
+	mldv2cleanup $swp1
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+exit $EXIT_STATUS
Signature · 1 line
2.25.4
author maintainer
#5 lore raw

PATCH 5/16 selftests: net: bridge: add test for mldv2 inc -> allow report

In reply to Nikolay Aleksandrov

From: Nikolay Aleksandrov <[email protected]>

The test checks for the following case:

   Router State  Report Received  New Router State     Actions
   INCLUDE (A)     ALLOW (B)      INCLUDE (A+B)        (B)=MALI
---
 .../selftests/net/forwarding/bridge_mld.sh    | 29 ++++++++++++++++++-
 1 file changed, 28 insertions(+), 1 deletion(-)
tools/testing/selftests/net/forwarding/bridge_mld.sh +28 -1
index 3d0d579e4e03..accc4ec2dcce 100755
@@ -1,7 +1,7 @@
 #!/bin/bash
 # SPDX-License-Identifier: GPL-2.0
 
-ALL_TESTS="mldv2include_test"
+ALL_TESTS="mldv2include_test mldv2inc_allow_test"
 NUM_NETIFS=4
 CHECK_TC="yes"
 TEST_GROUP="ff02::cc"
@@ -13,6 +13,12 @@ MZPKT_IS_INC="33:33:00:00:00:01:fe:54:00:04:5e:ba:86:dd:60:0a:2d:ae:00:54:00:01:
 00:05:02:00:00:00:00:8f:00:8e:d9:00:00:00:01:01:00:00:03:ff:02:00:00:00:00:00:00:00:00:00:\
 00:00:00:00:cc:20:01:0d:b8:00:01:00:00:00:00:00:00:00:00:00:01:20:01:0d:b8:00:01:00:00:00:\
 00:00:00:00:00:00:02:20:01:0d:b8:00:01:00:00:00:00:00:00:00:00:00:03"
+# MLDv2 allow report: grp ff02::cc allow 2001:db8:1::10,2001:db8:1::11,2001:db8:1::12
+MZPKT_ALLOW="33:33:00:00:00:01:fe:54:00:04:5e:ba:86:dd:60:0a:2d:ae:00:54:00:01:fe:80:00:00:\
+00:00:00:00:fc:54:00:ff:fe:04:5e:ba:ff:02:00:00:00:00:00:00:00:00:00:00:00:00:00:01:3a:00:05:\
+02:00:00:00:00:8f:00:8a:ac:00:00:00:01:05:00:00:03:ff:02:00:00:00:00:00:00:00:00:00:00:00:00:\
+00:cc:20:01:0d:b8:00:01:00:00:00:00:00:00:00:00:00:10:20:01:0d:b8:00:01:00:00:00:00:00:00:00:\
+00:00:11:20:01:0d:b8:00:01:00:00:00:00:00:00:00:00:00:12"
 
 source lib.sh
 
@@ -136,6 +142,27 @@ mldv2include_test()
 	mldv2cleanup $swp1
 }
 
+mldv2inc_allow_test()
+{
+	RET=0
+	local X=("2001:db8:1::10" "2001:db8:1::11" "2001:db8:1::12")
+
+	mldv2include_prepare $h1
+
+	$MZ $h1 -c 1 $MZPKT_ALLOW -q
+	sleep 1
+	brmcast_check_sg_entries "allow" "${X[@]}"
+
+	brmcast_check_sg_state 0 "${X[@]}"
+
+	brmcast_check_sg_fwding 1 "${X[@]}"
+	brmcast_check_sg_fwding 0 "2001:db8:1::100"
+
+	log_test "MLDv2 report $TEST_GROUP include -> allow"
+
+	mldv2cleanup $swp1
+}
+
 trap cleanup EXIT
 
 setup_prepare
Signature · 1 line
2.25.4
author maintainer
#6 lore raw

PATCH 6/16 selftests: net: bridge: add test for mldv2 inc -> is_include report

In reply to Nikolay Aleksandrov

From: Nikolay Aleksandrov <[email protected]>

The test checks for the following case:
Router State Report Received New Router State Actions
INCLUDE (A) IS_IN (B) INCLUDE (A+B) (B)=MALI

---
 .../selftests/net/forwarding/bridge_mld.sh    | 29 ++++++++++++++++++-
 1 file changed, 28 insertions(+), 1 deletion(-)
tools/testing/selftests/net/forwarding/bridge_mld.sh +28 -1
index accc4ec2dcce..a93bf6fa6caa 100755
@@ -1,7 +1,7 @@
 #!/bin/bash
 # SPDX-License-Identifier: GPL-2.0
 
-ALL_TESTS="mldv2include_test mldv2inc_allow_test"
+ALL_TESTS="mldv2include_test mldv2inc_allow_test mldv2inc_is_include_test"
 NUM_NETIFS=4
 CHECK_TC="yes"
 TEST_GROUP="ff02::cc"
@@ -13,6 +13,12 @@ MZPKT_IS_INC="33:33:00:00:00:01:fe:54:00:04:5e:ba:86:dd:60:0a:2d:ae:00:54:00:01:
 00:05:02:00:00:00:00:8f:00:8e:d9:00:00:00:01:01:00:00:03:ff:02:00:00:00:00:00:00:00:00:00:\
 00:00:00:00:cc:20:01:0d:b8:00:01:00:00:00:00:00:00:00:00:00:01:20:01:0d:b8:00:01:00:00:00:\
 00:00:00:00:00:00:02:20:01:0d:b8:00:01:00:00:00:00:00:00:00:00:00:03"
+# MLDv2 is_in report: grp ff02::cc is_include 2001:db8:1::10,2001:db8:1::11,2001:db8:1::12
+MZPKT_IS_INC2="33:33:00:00:00:01:fe:54:00:04:5e:ba:86:dd:60:0a:2d:ae:00:54:00:01:fe:80:00:\
+00:00:00:00:00:fc:54:00:ff:fe:04:5e:ba:ff:02:00:00:00:00:00:00:00:00:00:00:00:00:00:01:3a:00:\
+05:02:00:00:00:00:8f:00:8e:ac:00:00:00:01:01:00:00:03:ff:02:00:00:00:00:00:00:00:00:00:00:00:\
+00:00:cc:20:01:0d:b8:00:01:00:00:00:00:00:00:00:00:00:10:20:01:0d:b8:00:01:00:00:00:00:00:00:\
+00:00:00:11:20:01:0d:b8:00:01:00:00:00:00:00:00:00:00:00:12"
 # MLDv2 allow report: grp ff02::cc allow 2001:db8:1::10,2001:db8:1::11,2001:db8:1::12
 MZPKT_ALLOW="33:33:00:00:00:01:fe:54:00:04:5e:ba:86:dd:60:0a:2d:ae:00:54:00:01:fe:80:00:00:\
 00:00:00:00:fc:54:00:ff:fe:04:5e:ba:ff:02:00:00:00:00:00:00:00:00:00:00:00:00:00:01:3a:00:05:\
@@ -163,6 +169,27 @@ mldv2inc_allow_test()
 	mldv2cleanup $swp1
 }
 
+mldv2inc_is_include_test()
+{
+	RET=0
+	local X=("2001:db8:1::10" "2001:db8:1::11" "2001:db8:1::12")
+
+	mldv2include_prepare $h1
+
+	$MZ $h1 -c 1 $MZPKT_IS_INC2 -q
+	sleep 1
+	brmcast_check_sg_entries "is_include" "${X[@]}"
+
+	brmcast_check_sg_state 0 "${X[@]}"
+
+	brmcast_check_sg_fwding 1 "${X[@]}"
+	brmcast_check_sg_fwding 0 "2001:db8:1::100"
+
+	log_test "MLDv2 report $TEST_GROUP include -> is_include"
+
+	mldv2cleanup $swp1
+}
+
 trap cleanup EXIT
 
 setup_prepare
Signature · 1 line
2.25.4
author maintainer
#7 lore raw

PATCH 7/16 selftests: net: bridge: add test for mldv2 inc -> is_exclude report

In reply to Nikolay Aleksandrov

From: Nikolay Aleksandrov <[email protected]>

The test checks for the following case:
Router State Report Received New Router State Actions
INCLUDE (A) IS_EX (B) EXCLUDE (A*B, B-A) (B-A)=0
Delete (A-B) Filter Timer=MALI

---
 .../selftests/net/forwarding/bridge_mld.sh    | 54 ++++++++++++++++++-
 1 file changed, 53 insertions(+), 1 deletion(-)
tools/testing/selftests/net/forwarding/bridge_mld.sh +53 -1
index a93bf6fa6caa..ddef8699be7d 100755
@@ -1,7 +1,7 @@
 #!/bin/bash
 # SPDX-License-Identifier: GPL-2.0
 
-ALL_TESTS="mldv2include_test mldv2inc_allow_test mldv2inc_is_include_test"
+ALL_TESTS="mldv2include_test mldv2inc_allow_test mldv2inc_is_include_test mldv2inc_is_exclude_test"
 NUM_NETIFS=4
 CHECK_TC="yes"
 TEST_GROUP="ff02::cc"
@@ -25,6 +25,12 @@ MZPKT_ALLOW="33:33:00:00:00:01:fe:54:00:04:5e:ba:86:dd:60:0a:2d:ae:00:54:00:01:f
 02:00:00:00:00:8f:00:8a:ac:00:00:00:01:05:00:00:03:ff:02:00:00:00:00:00:00:00:00:00:00:00:00:\
 00:cc:20:01:0d:b8:00:01:00:00:00:00:00:00:00:00:00:10:20:01:0d:b8:00:01:00:00:00:00:00:00:00:\
 00:00:11:20:01:0d:b8:00:01:00:00:00:00:00:00:00:00:00:12"
+# MLDv2 is_ex report: grp ff02::cc is_exclude 2001:db8:1::1,2001:db8:1::2,2001:db8:1::20,2001:db8:1::21
+MZPKT_IS_EXC="33:33:00:00:00:01:fe:54:00:04:5e:ba:86:dd:60:0a:2d:ae:00:64:00:01:fe:80:00:00:00:\
+00:00:00:fc:54:00:ff:fe:04:5e:ba:ff:02:00:00:00:00:00:00:00:00:00:00:00:00:00:01:3a:00:05:02:00:\
+00:00:00:8f:00:5f:d0:00:00:00:01:02:00:00:04:ff:02:00:00:00:00:00:00:00:00:00:00:00:00:00:cc:20:\
+01:0d:b8:00:01:00:00:00:00:00:00:00:00:00:01:20:01:0d:b8:00:01:00:00:00:00:00:00:00:00:00:02:20:\
+01:0d:b8:00:01:00:00:00:00:00:00:00:00:00:20:20:01:0d:b8:00:01:00:00:00:00:00:00:00:00:00:21"
 
 source lib.sh
 
@@ -123,6 +129,38 @@ mldv2include_prepare()
 	brmcast_check_sg_entries "is_include" "${X[@]}"
 }
 
+mldv2exclude_prepare()
+{
+	local host1_if=$1
+	local mac=$2
+	local group=$3
+	local pkt=$4
+	local X=("2001:db8:1::1" "2001:db8:1::2")
+	local Y=("2001:db8:1::20" "2001:db8:1::21")
+
+	mldv2include_prepare $h1
+
+	$MZ $host1_if -c 1 $MZPKT_IS_EXC -q
+	sleep 1
+	bridge -j -d -s mdb show dev br0 \
+		| jq -e ".[].mdb[] | \
+			 select(.grp == \"$TEST_GROUP\" and \
+			 .source_list != null and .filter_mode == \"exclude\")" &>/dev/null
+	check_err $? "Wrong *,G entry filter mode"
+
+	brmcast_check_sg_entries "is_exclude" "${X[@]}" "${Y[@]}"
+
+	brmcast_check_sg_state 0 "${X[@]}"
+	brmcast_check_sg_state 1 "${Y[@]}"
+
+	bridge -j -d -s mdb show dev br0 \
+		| jq -e ".[].mdb[] | \
+			 select(.grp == \"$TEST_GROUP\" and \
+				.source_list != null and
+				.source_list[].address == \"2001:db8:1::3\")" &>/dev/null
+	check_fail $? "Wrong *,G entry source list, 2001:db8:1::3 entry still exists"
+}
+
 mldv2cleanup()
 {
 	local port=$1
@@ -190,6 +228,20 @@ mldv2inc_is_include_test()
 	mldv2cleanup $swp1
 }
 
+mldv2inc_is_exclude_test()
+{
+	RET=0
+
+	mldv2exclude_prepare $h1
+
+	brmcast_check_sg_fwding 1 "${X[@]}" 2001:db8:1::100
+	brmcast_check_sg_fwding 0 "${Y[@]}"
+
+	log_test "MLDv2 report $TEST_GROUP include -> is_exclude"
+
+	mldv2cleanup $swp1
+}
+
 trap cleanup EXIT
 
 setup_prepare
Signature · 1 line
2.25.4
author maintainer
#8 lore raw

PATCH 8/16 selftests: net: bridge: add test for mldv2 inc -> to_exclude report

In reply to Nikolay Aleksandrov

From: Nikolay Aleksandrov <[email protected]>

The test checks for the following case:

   Router State  Report Received  New Router State     Actions
   INCLUDE (A)     TO_EX (B)      EXCLUDE (A*B,B-A)    (B-A)=0
                                                       Delete (A-B)
                                                       Send Q(MA,A*B)
                                                       Filter Timer=MALI
---
 .../selftests/net/forwarding/bridge_mld.sh    | 56 ++++++++++++++++++-
 1 file changed, 55 insertions(+), 1 deletion(-)
tools/testing/selftests/net/forwarding/bridge_mld.sh +55 -1
index ddef8699be7d..571b01ef672c 100755
@@ -1,7 +1,8 @@
 #!/bin/bash
 # SPDX-License-Identifier: GPL-2.0
 
-ALL_TESTS="mldv2include_test mldv2inc_allow_test mldv2inc_is_include_test mldv2inc_is_exclude_test"
+ALL_TESTS="mldv2include_test mldv2inc_allow_test mldv2inc_is_include_test mldv2inc_is_exclude_test \
+	   mldv2inc_to_exclude_test"
 NUM_NETIFS=4
 CHECK_TC="yes"
 TEST_GROUP="ff02::cc"
@@ -31,6 +32,12 @@ MZPKT_IS_EXC="33:33:00:00:00:01:fe:54:00:04:5e:ba:86:dd:60:0a:2d:ae:00:64:00:01:
 00:00:00:8f:00:5f:d0:00:00:00:01:02:00:00:04:ff:02:00:00:00:00:00:00:00:00:00:00:00:00:00:cc:20:\
 01:0d:b8:00:01:00:00:00:00:00:00:00:00:00:01:20:01:0d:b8:00:01:00:00:00:00:00:00:00:00:00:02:20:\
 01:0d:b8:00:01:00:00:00:00:00:00:00:00:00:20:20:01:0d:b8:00:01:00:00:00:00:00:00:00:00:00:21"
+# MLDv2 to_ex report: grp ff02::cc to_exclude 2001:db8:1::1,2001:db8:1::20,2001:db8:1::30
+MZPKT_TO_EXC="33:33:00:00:00:01:fe:54:00:04:5e:ba:86:dd:60:0a:2d:ae:00:54:00:01:fe:80:00:00:00:\
+00:00:00:fc:54:00:ff:fe:04:5e:ba:ff:02:00:00:00:00:00:00:00:00:00:00:00:00:00:01:3a:00:05:02:00:\
+00:00:00:8f:00:8b:8e:00:00:00:01:04:00:00:03:ff:02:00:00:00:00:00:00:00:00:00:00:00:00:00:cc:20:\
+01:0d:b8:00:01:00:00:00:00:00:00:00:00:00:01:20:01:0d:b8:00:01:00:00:00:00:00:00:00:00:00:20:20:\
+01:0d:b8:00:01:00:00:00:00:00:00:00:00:00:30"
 
 source lib.sh
 
@@ -242,6 +249,53 @@ mldv2inc_is_exclude_test()
 	mldv2cleanup $swp1
 }
 
+mldv2inc_to_exclude_test()
+{
+	RET=0
+	local X=("2001:db8:1::1")
+	local Y=("2001:db8:1::20" "2001:db8:1::30")
+
+	mldv2include_prepare $h1
+
+	ip link set dev br0 type bridge mcast_last_member_interval 500
+	check_err $? "Could not change mcast_last_member_interval to 5s"
+
+	$MZ $h1 -c 1 $MZPKT_TO_EXC -q
+	sleep 1
+	bridge -j -d -s mdb show dev br0 \
+		| jq -e ".[].mdb[] | \
+			 select(.grp == \"$TEST_GROUP\" and \
+				.source_list != null and .filter_mode == \"exclude\")" &>/dev/null
+	check_err $? "Wrong *,G entry filter mode"
+
+	brmcast_check_sg_entries "to_exclude" "${X[@]}" "${Y[@]}"
+
+	brmcast_check_sg_state 0 "${X[@]}"
+	brmcast_check_sg_state 1 "${Y[@]}"
+
+	bridge -j -d -s mdb show dev br0 \
+		| jq -e ".[].mdb[] | \
+			 select(.grp == \"$TEST_GROUP\" and \
+				.source_list != null and
+				.source_list[].address == \"2001:db8:1::2\")" &>/dev/null
+	check_fail $? "Wrong *,G entry source list, 2001:db8:1::2 entry still exists"
+	bridge -j -d -s mdb show dev br0 \
+		| jq -e ".[].mdb[] | \
+			 select(.grp == \"$TEST_GROUP\" and \
+				.source_list != null and
+				.source_list[].address == \"2001:db8:1::21\")" &>/dev/null
+	check_fail $? "Wrong *,G entry source list, 2001:db8:1::21 entry still exists"
+
+	brmcast_check_sg_fwding 1 "${X[@]}" 2001:db8:1::100
+	brmcast_check_sg_fwding 0 "${Y[@]}"
+
+	log_test "MLDv2 report $TEST_GROUP include -> to_exclude"
+
+	ip link set dev br0 type bridge mcast_last_member_interval 100
+
+	mldv2cleanup $swp1
+}
+
 trap cleanup EXIT
 
 setup_prepare
Signature · 1 line
2.25.4
author maintainer
#9 lore raw

PATCH 9/16 selftests: net: bridge: add test for mldv2 exc -> allow report

In reply to Nikolay Aleksandrov

From: Nikolay Aleksandrov <[email protected]>

The test checks for the following case:

   Router State  Report Received  New Router State     Actions
   EXCLUDE (X,Y)   ALLOW (A)      EXCLUDE (X+A,Y-A)    (A)=MALI
---
 .../selftests/net/forwarding/bridge_mld.sh    | 30 ++++++++++++++++++-
 1 file changed, 29 insertions(+), 1 deletion(-)
tools/testing/selftests/net/forwarding/bridge_mld.sh +29 -1
index 571b01ef672c..97882c13f278 100755
@@ -2,7 +2,7 @@
 # SPDX-License-Identifier: GPL-2.0
 
 ALL_TESTS="mldv2include_test mldv2inc_allow_test mldv2inc_is_include_test mldv2inc_is_exclude_test \
-	   mldv2inc_to_exclude_test"
+	   mldv2inc_to_exclude_test mldv2exc_allow_test"
 NUM_NETIFS=4
 CHECK_TC="yes"
 TEST_GROUP="ff02::cc"
@@ -26,6 +26,11 @@ MZPKT_ALLOW="33:33:00:00:00:01:fe:54:00:04:5e:ba:86:dd:60:0a:2d:ae:00:54:00:01:f
 02:00:00:00:00:8f:00:8a:ac:00:00:00:01:05:00:00:03:ff:02:00:00:00:00:00:00:00:00:00:00:00:00:\
 00:cc:20:01:0d:b8:00:01:00:00:00:00:00:00:00:00:00:10:20:01:0d:b8:00:01:00:00:00:00:00:00:00:\
 00:00:11:20:01:0d:b8:00:01:00:00:00:00:00:00:00:00:00:12"
+# MLDv2 allow report: grp ff02::cc allow 2001:db8:1::20,2001:db8:1::30
+MZPKT_ALLOW2="33:33:00:00:00:01:fe:54:00:04:5e:ba:86:dd:60:0a:2d:ae:00:44:00:01:fe:80:00:00:00:\
+00:00:00:fc:54:00:ff:fe:04:5e:ba:ff:02:00:00:00:00:00:00:00:00:00:00:00:00:00:01:3a:00:05:02:00:\
+00:00:00:8f:00:b8:5a:00:00:00:01:05:00:00:02:ff:02:00:00:00:00:00:00:00:00:00:00:00:00:00:cc:20:\
+01:0d:b8:00:01:00:00:00:00:00:00:00:00:00:20:20:01:0d:b8:00:01:00:00:00:00:00:00:00:00:00:30"
 # MLDv2 is_ex report: grp ff02::cc is_exclude 2001:db8:1::1,2001:db8:1::2,2001:db8:1::20,2001:db8:1::21
 MZPKT_IS_EXC="33:33:00:00:00:01:fe:54:00:04:5e:ba:86:dd:60:0a:2d:ae:00:64:00:01:fe:80:00:00:00:\
 00:00:00:fc:54:00:ff:fe:04:5e:ba:ff:02:00:00:00:00:00:00:00:00:00:00:00:00:00:01:3a:00:05:02:00:\
@@ -296,6 +301,29 @@ mldv2inc_to_exclude_test()
 	mldv2cleanup $swp1
 }
 
+mldv2exc_allow_test()
+{
+	RET=0
+	local X=("2001:db8:1::1" "2001:db8:1::2" "2001:db8:1::20" "2001:db8:1::30")
+	local Y=("2001:db8:1::21")
+
+	mldv2exclude_prepare $h1
+
+	$MZ $h1 -c 1 $MZPKT_ALLOW2 -q
+	sleep 1
+	brmcast_check_sg_entries "allow" "${X[@]}" "${Y[@]}"
+
+	brmcast_check_sg_state 0 "${X[@]}"
+	brmcast_check_sg_state 1 "${Y[@]}"
+
+	brmcast_check_sg_fwding 1 "${X[@]}" 2001:db8:1::100
+	brmcast_check_sg_fwding 0 "${Y[@]}"
+
+	log_test "MLDv2 report $TEST_GROUP exclude -> allow"
+
+	mldv2cleanup $swp1
+}
+
 trap cleanup EXIT
 
 setup_prepare
Signature · 1 line
2.25.4
author maintainer
#10 lore raw

PATCH 10/16 selftests: net: bridge: add test for mldv2 exc -> is_include report

In reply to Nikolay Aleksandrov

From: Nikolay Aleksandrov <[email protected]>

The test checks for the following case:
Router State Report Received New Router State Actions
EXCLUDE (X,Y) IS_IN (A) EXCLUDE (X+A, Y-A) (A)=MALI

---
 .../selftests/net/forwarding/bridge_mld.sh    | 30 ++++++++++++++++++-
 1 file changed, 29 insertions(+), 1 deletion(-)
tools/testing/selftests/net/forwarding/bridge_mld.sh +29 -1
index 97882c13f278..bae865b5bc8c 100755
@@ -2,7 +2,7 @@
 # SPDX-License-Identifier: GPL-2.0
 
 ALL_TESTS="mldv2include_test mldv2inc_allow_test mldv2inc_is_include_test mldv2inc_is_exclude_test \
-	   mldv2inc_to_exclude_test mldv2exc_allow_test"
+	   mldv2inc_to_exclude_test mldv2exc_allow_test mldv2exc_is_include_test"
 NUM_NETIFS=4
 CHECK_TC="yes"
 TEST_GROUP="ff02::cc"
@@ -20,6 +20,11 @@ MZPKT_IS_INC2="33:33:00:00:00:01:fe:54:00:04:5e:ba:86:dd:60:0a:2d:ae:00:54:00:01
 05:02:00:00:00:00:8f:00:8e:ac:00:00:00:01:01:00:00:03:ff:02:00:00:00:00:00:00:00:00:00:00:00:\
 00:00:cc:20:01:0d:b8:00:01:00:00:00:00:00:00:00:00:00:10:20:01:0d:b8:00:01:00:00:00:00:00:00:\
 00:00:00:11:20:01:0d:b8:00:01:00:00:00:00:00:00:00:00:00:12"
+# MLDv2 is_in report: grp ff02::cc is_include 2001:db8:1::20,2001:db8:1::30
+MZPKT_IS_INC3="33:33:00:00:00:01:fe:54:00:04:5e:ba:86:dd:60:0a:2d:ae:00:44:00:01:fe:80:00:00:00:\
+00:00:00:fc:54:00:ff:fe:04:5e:ba:ff:02:00:00:00:00:00:00:00:00:00:00:00:00:00:01:3a:00:05:02:00:\
+00:00:00:8f:00:bc:5a:00:00:00:01:01:00:00:02:ff:02:00:00:00:00:00:00:00:00:00:00:00:00:00:cc:20:\
+01:0d:b8:00:01:00:00:00:00:00:00:00:00:00:20:20:01:0d:b8:00:01:00:00:00:00:00:00:00:00:00:30"
 # MLDv2 allow report: grp ff02::cc allow 2001:db8:1::10,2001:db8:1::11,2001:db8:1::12
 MZPKT_ALLOW="33:33:00:00:00:01:fe:54:00:04:5e:ba:86:dd:60:0a:2d:ae:00:54:00:01:fe:80:00:00:\
 00:00:00:00:fc:54:00:ff:fe:04:5e:ba:ff:02:00:00:00:00:00:00:00:00:00:00:00:00:00:01:3a:00:05:\
@@ -324,6 +329,29 @@ mldv2exc_allow_test()
 	mldv2cleanup $swp1
 }
 
+mldv2exc_is_include_test()
+{
+	RET=0
+	local X=("2001:db8:1::1" "2001:db8:1::2" "2001:db8:1::20" "2001:db8:1::30")
+	local Y=("2001:db8:1::21")
+
+	mldv2exclude_prepare $h1
+
+	$MZ $h1 -c 1 $MZPKT_IS_INC3 -q
+	sleep 1
+	brmcast_check_sg_entries "is_include" "${X[@]}" "${Y[@]}"
+
+	brmcast_check_sg_state 0 "${X[@]}"
+	brmcast_check_sg_state 1 "${Y[@]}"
+
+	brmcast_check_sg_fwding 1 "${X[@]}" 2001:db8:1::100
+	brmcast_check_sg_fwding 0 "${Y[@]}"
+
+	log_test "MLDv2 report $TEST_GROUP exclude -> is_include"
+
+	mldv2cleanup $swp1
+}
+
 trap cleanup EXIT
 
 setup_prepare
Signature · 1 line
2.25.4
author maintainer
#11 lore raw

PATCH 11/16 selftests: net: bridge: add test for mldv2 exc -> is_exclude report

In reply to Nikolay Aleksandrov

From: Nikolay Aleksandrov <[email protected]>

The test checks for the following case:
Router State Report Received New Router State Actions
EXCLUDE (X,Y) IS_EX (A) EXCLUDE (A-Y, Y*A) (A-X-Y)=MALI
Delete (X-A) Delete (Y-A) Filter Timer=MALI

---
 .../selftests/net/forwarding/bridge_mld.sh    | 31 ++++++++++++++++++-
 1 file changed, 30 insertions(+), 1 deletion(-)
tools/testing/selftests/net/forwarding/bridge_mld.sh +30 -1
index bae865b5bc8c..0f48c8da041b 100755
@@ -2,7 +2,8 @@
 # SPDX-License-Identifier: GPL-2.0
 
 ALL_TESTS="mldv2include_test mldv2inc_allow_test mldv2inc_is_include_test mldv2inc_is_exclude_test \
-	   mldv2inc_to_exclude_test mldv2exc_allow_test mldv2exc_is_include_test"
+	   mldv2inc_to_exclude_test mldv2exc_allow_test mldv2exc_is_include_test \
+	   mldv2exc_is_exclude_test"
 NUM_NETIFS=4
 CHECK_TC="yes"
 TEST_GROUP="ff02::cc"
@@ -42,6 +43,11 @@ MZPKT_IS_EXC="33:33:00:00:00:01:fe:54:00:04:5e:ba:86:dd:60:0a:2d:ae:00:64:00:01:
 00:00:00:8f:00:5f:d0:00:00:00:01:02:00:00:04:ff:02:00:00:00:00:00:00:00:00:00:00:00:00:00:cc:20:\
 01:0d:b8:00:01:00:00:00:00:00:00:00:00:00:01:20:01:0d:b8:00:01:00:00:00:00:00:00:00:00:00:02:20:\
 01:0d:b8:00:01:00:00:00:00:00:00:00:00:00:20:20:01:0d:b8:00:01:00:00:00:00:00:00:00:00:00:21"
+# MLDv2 is_ex report: grp ff02::cc is_exclude 2001:db8:1::20,2001:db8:1::30
+MZPKT_IS_EXC2="33:33:00:00:00:01:fe:54:00:04:5e:ba:86:dd:60:0a:2d:ae:00:44:00:01:fe:80:00:00:00:\
+00:00:00:fc:54:00:ff:fe:04:5e:ba:ff:02:00:00:00:00:00:00:00:00:00:00:00:00:00:01:3a:00:05:02:00:\
+00:00:00:8f:00:bb:5a:00:00:00:01:02:00:00:02:ff:02:00:00:00:00:00:00:00:00:00:00:00:00:00:cc:20:\
+01:0d:b8:00:01:00:00:00:00:00:00:00:00:00:20:20:01:0d:b8:00:01:00:00:00:00:00:00:00:00:00:30"
 # MLDv2 to_ex report: grp ff02::cc to_exclude 2001:db8:1::1,2001:db8:1::20,2001:db8:1::30
 MZPKT_TO_EXC="33:33:00:00:00:01:fe:54:00:04:5e:ba:86:dd:60:0a:2d:ae:00:54:00:01:fe:80:00:00:00:\
 00:00:00:fc:54:00:ff:fe:04:5e:ba:ff:02:00:00:00:00:00:00:00:00:00:00:00:00:00:01:3a:00:05:02:00:\
@@ -352,6 +358,29 @@ mldv2exc_is_include_test()
 	mldv2cleanup $swp1
 }
 
+mldv2exc_is_exclude_test()
+{
+	RET=0
+	local X=("2001:db8:1::30")
+	local Y=("2001:db8:1::20")
+
+	mldv2exclude_prepare $h1
+
+	$MZ $h1 -c 1 $MZPKT_IS_EXC2 -q
+	sleep 1
+	brmcast_check_sg_entries "is_exclude" "${X[@]}" "${Y[@]}"
+
+	brmcast_check_sg_state 0 "${X[@]}"
+	brmcast_check_sg_state 1 "${Y[@]}"
+
+	brmcast_check_sg_fwding 1 "${X[@]}" 2001:db8:1::100
+	brmcast_check_sg_fwding 0 "${Y[@]}"
+
+	log_test "MLDv2 report $TEST_GROUP exclude -> is_exclude"
+
+	mldv2cleanup $swp1
+}
+
 trap cleanup EXIT
 
 setup_prepare
Signature · 1 line
2.25.4
author maintainer
#12 lore raw

PATCH 12/16 selftests: net: bridge: add test for mldv2 exc -> to_exclude report

In reply to Nikolay Aleksandrov

From: Nikolay Aleksandrov <[email protected]>

The test checks for the following case:

   Router State  Report Received  New Router State     Actions
   EXCLUDE (X,Y)   TO_EX (A)      EXCLUDE (A-Y,Y*A)    (A-X-Y) =
                                                            Filter Timer
                                                       Delete (X-A)
                                                       Delete (Y-A)
                                                       Send Q(MA,A-Y)
                                                       Filter Timer=MALI
---
 .../selftests/net/forwarding/bridge_mld.sh    | 30 ++++++++++++++++++-
 1 file changed, 29 insertions(+), 1 deletion(-)
tools/testing/selftests/net/forwarding/bridge_mld.sh +29 -1
index 0f48c8da041b..024fa22fa3c2 100755
@@ -3,7 +3,7 @@
 
 ALL_TESTS="mldv2include_test mldv2inc_allow_test mldv2inc_is_include_test mldv2inc_is_exclude_test \
 	   mldv2inc_to_exclude_test mldv2exc_allow_test mldv2exc_is_include_test \
-	   mldv2exc_is_exclude_test"
+	   mldv2exc_is_exclude_test mldv2exc_to_exclude_test"
 NUM_NETIFS=4
 CHECK_TC="yes"
 TEST_GROUP="ff02::cc"
@@ -381,6 +381,34 @@ mldv2exc_is_exclude_test()
 	mldv2cleanup $swp1
 }
 
+mldv2exc_to_exclude_test()
+{
+	RET=0
+	local X=("2001:db8:1::1" "2001:db8:1::30")
+	local Y=("2001:db8:1::20")
+
+	mldv2exclude_prepare $h1
+
+	ip link set dev br0 type bridge mcast_last_member_interval 500
+	check_err $? "Could not change mcast_last_member_interval to 5s"
+
+	$MZ $h1 -c 1 $MZPKT_TO_EXC -q
+	sleep 1
+	brmcast_check_sg_entries "to_exclude" "${X[@]}" "${Y[@]}"
+
+	brmcast_check_sg_state 0 "${X[@]}"
+	brmcast_check_sg_state 1 "${Y[@]}"
+
+	brmcast_check_sg_fwding 1 "${X[@]}" 2001:db8:1::100
+	brmcast_check_sg_fwding 0 "${Y[@]}"
+
+	log_test "MLDv2 report $TEST_GROUP exclude -> to_exclude"
+
+	ip link set dev br0 type bridge mcast_last_member_interval 100
+
+	mldv2cleanup $swp1
+}
+
 trap cleanup EXIT
 
 setup_prepare
Signature · 1 line
2.25.4
author maintainer
#13 lore raw

PATCH 13/16 selftests: net: bridge: add test for mldv2 inc -> block report

In reply to Nikolay Aleksandrov

From: Nikolay Aleksandrov <[email protected]>

The test checks for the following case:

   Router State  Report Received  New Router State     Actions
   INCLUDE (A)     BLOCK (B)      INCLUDE (A)          Send Q(MA,A*B)
---
 .../selftests/net/forwarding/bridge_mld.sh    | 37 ++++++++++++++++++-
 1 file changed, 36 insertions(+), 1 deletion(-)
tools/testing/selftests/net/forwarding/bridge_mld.sh +36 -1
index 024fa22fa3c2..a3c405b2fd6f 100755
@@ -3,7 +3,7 @@
 
 ALL_TESTS="mldv2include_test mldv2inc_allow_test mldv2inc_is_include_test mldv2inc_is_exclude_test \
 	   mldv2inc_to_exclude_test mldv2exc_allow_test mldv2exc_is_include_test \
-	   mldv2exc_is_exclude_test mldv2exc_to_exclude_test"
+	   mldv2exc_is_exclude_test mldv2exc_to_exclude_test mldv2inc_block_test"
 NUM_NETIFS=4
 CHECK_TC="yes"
 TEST_GROUP="ff02::cc"
@@ -54,6 +54,12 @@ MZPKT_TO_EXC="33:33:00:00:00:01:fe:54:00:04:5e:ba:86:dd:60:0a:2d:ae:00:54:00:01:
 00:00:00:8f:00:8b:8e:00:00:00:01:04:00:00:03:ff:02:00:00:00:00:00:00:00:00:00:00:00:00:00:cc:20:\
 01:0d:b8:00:01:00:00:00:00:00:00:00:00:00:01:20:01:0d:b8:00:01:00:00:00:00:00:00:00:00:00:20:20:\
 01:0d:b8:00:01:00:00:00:00:00:00:00:00:00:30"
+# MLDv2 block report: grp ff02::cc block 2001:db8:1::1,2001:db8:1::20,2001:db8:1::30
+MZPKT_BLOCK="33:33:00:00:00:01:fe:54:00:04:5e:ba:86:dd:60:0a:2d:ae:00:54:00:01:fe:80:00:00:00:00:\
+00:00:fc:54:00:ff:fe:04:5e:ba:ff:02:00:00:00:00:00:00:00:00:00:00:00:00:00:01:3a:00:05:02:00:00:\
+00:00:8f:00:89:8e:00:00:00:01:06:00:00:03:ff:02:00:00:00:00:00:00:00:00:00:00:00:00:00:cc:20:01:\
+0d:b8:00:01:00:00:00:00:00:00:00:00:00:01:20:01:0d:b8:00:01:00:00:00:00:00:00:00:00:00:20:20:01:\
+0d:b8:00:01:00:00:00:00:00:00:00:00:00:30"
 
 source lib.sh
 
@@ -409,6 +415,35 @@ mldv2exc_to_exclude_test()
 	mldv2cleanup $swp1
 }
 
+mldv2inc_block_test()
+{
+	RET=0
+	local X=("2001:db8:1::2" "2001:db8:1::3")
+
+	mldv2include_prepare $h1
+
+	$MZ $h1 -c 1 $MZPKT_BLOCK -q
+	# make sure the lowered timers have expired (by default 2 seconds)
+	sleep 3
+	brmcast_check_sg_entries "block" "${X[@]}"
+
+	brmcast_check_sg_state 0 "${X[@]}"
+
+	bridge -j -d -s mdb show dev br0 \
+		| jq -e ".[].mdb[] | \
+			 select(.grp == \"$TEST_GROUP\" and \
+				.source_list != null and
+				.source_list[].address == \"2001:db8:1::1\")" &>/dev/null
+	check_fail $? "Wrong *,G entry source list, 2001:db8:1::1 entry still exists"
+
+	brmcast_check_sg_fwding 1 "${X[@]}"
+	brmcast_check_sg_fwding 0 2001:db8:1::100
+
+	log_test "MLDv2 report $TEST_GROUP include -> block"
+
+	mldv2cleanup $swp1
+}
+
 trap cleanup EXIT
 
 setup_prepare
Signature · 1 line
2.25.4
author maintainer
#14 lore raw

PATCH 14/16 selftests: net: bridge: add test for mldv2 exc -> block report

In reply to Nikolay Aleksandrov

From: Nikolay Aleksandrov <[email protected]>

The test checks for the following case:

   Router State  Report Received  New Router State     Actions
   EXCLUDE (X,Y)   BLOCK (A)      EXCLUDE (X+(A-Y),Y)  (A-X-Y) =
                                                            Filter Timer
                                                       Send Q(MA,A-Y)
---
 .../selftests/net/forwarding/bridge_mld.sh    | 31 ++++++++++++++++++-
 1 file changed, 30 insertions(+), 1 deletion(-)
tools/testing/selftests/net/forwarding/bridge_mld.sh +30 -1
index a3c405b2fd6f..c498e51b8d2b 100755
@@ -3,7 +3,8 @@
 
 ALL_TESTS="mldv2include_test mldv2inc_allow_test mldv2inc_is_include_test mldv2inc_is_exclude_test \
 	   mldv2inc_to_exclude_test mldv2exc_allow_test mldv2exc_is_include_test \
-	   mldv2exc_is_exclude_test mldv2exc_to_exclude_test mldv2inc_block_test"
+	   mldv2exc_is_exclude_test mldv2exc_to_exclude_test mldv2inc_block_test \
+	   mldv2exc_block_test"
 NUM_NETIFS=4
 CHECK_TC="yes"
 TEST_GROUP="ff02::cc"
@@ -444,6 +445,34 @@ mldv2inc_block_test()
 	mldv2cleanup $swp1
 }
 
+mldv2exc_block_test()
+{
+	RET=0
+	local X=("2001:db8:1::1" "2001:db8:1::2" "2001:db8:1::30")
+	local Y=("2001:db8:1::20" "2001:db8:1::21")
+
+	mldv2exclude_prepare $h1
+
+	ip link set dev br0 type bridge mcast_last_member_interval 500
+	check_err $? "Could not change mcast_last_member_interval to 5s"
+
+	$MZ $h1 -c 1 $MZPKT_BLOCK -q
+	sleep 1
+	brmcast_check_sg_entries "block" "${X[@]}" "${Y[@]}"
+
+	brmcast_check_sg_state 0 "${X[@]}"
+	brmcast_check_sg_state 1 "${Y[@]}"
+
+	brmcast_check_sg_fwding 1 "${X[@]}" 2001:db8:1::100
+	brmcast_check_sg_fwding 0 "${Y[@]}"
+
+	log_test "MLDv2 report $TEST_GROUP exclude -> block"
+
+	ip link set dev br0 type bridge mcast_last_member_interval 100
+
+	mldv2cleanup $swp1
+}
+
 trap cleanup EXIT
 
 setup_prepare
Signature · 1 line
2.25.4
author maintainer
#15 lore raw

PATCH 15/16 selftests: net: bridge: add test for mldv2 exclude timeout

In reply to Nikolay Aleksandrov

From: Nikolay Aleksandrov <[email protected]>

Test that when a group in exclude mode expires it changes mode to include and the blocked entries are deleted.

---
 .../selftests/net/forwarding/bridge_mld.sh    | 48 ++++++++++++++++++-
 1 file changed, 47 insertions(+), 1 deletion(-)
tools/testing/selftests/net/forwarding/bridge_mld.sh +47 -1
index c498e51b8d2b..b34cf4c6ceba 100755
@@ -4,7 +4,7 @@
 ALL_TESTS="mldv2include_test mldv2inc_allow_test mldv2inc_is_include_test mldv2inc_is_exclude_test \
 	   mldv2inc_to_exclude_test mldv2exc_allow_test mldv2exc_is_include_test \
 	   mldv2exc_is_exclude_test mldv2exc_to_exclude_test mldv2inc_block_test \
-	   mldv2exc_block_test"
+	   mldv2exc_block_test mldv2exc_timeout_test"
 NUM_NETIFS=4
 CHECK_TC="yes"
 TEST_GROUP="ff02::cc"
@@ -473,6 +473,52 @@ mldv2exc_block_test()
 	mldv2cleanup $swp1
 }
 
+mldv2exc_timeout_test()
+{
+	RET=0
+	local X=("2001:db8:1::20" "2001:db8:1::30")
+
+	# GMI should be 3 seconds
+	ip link set dev br0 type bridge mcast_query_interval 100 mcast_query_response_interval 100
+
+	mldv2exclude_prepare $h1
+	ip link set dev br0 type bridge mcast_query_interval 500 mcast_query_response_interval 500
+	$MZ $h1 -c 1 $MZPKT_ALLOW2 -q
+	sleep 3
+	bridge -j -d -s mdb show dev br0 \
+		| jq -e ".[].mdb[] | \
+			 select(.grp == \"$TEST_GROUP\" and \
+				.source_list != null and .filter_mode == \"include\")" &>/dev/null
+	check_err $? "Wrong *,G entry filter mode"
+
+	bridge -j -d -s mdb show dev br0 \
+		| jq -e ".[].mdb[] | \
+			 select(.grp == \"$TEST_GROUP\" and \
+				.source_list != null and
+				.source_list[].address == \"2001:db8:1::1\")" &>/dev/null
+	check_fail $? "Wrong *,G entry source list, 2001:db8:1::1 entry still exists"
+	bridge -j -d -s mdb show dev br0 \
+		| jq -e ".[].mdb[] | \
+			 select(.grp == \"$TEST_GROUP\" and \
+				.source_list != null and
+				.source_list[].address == \"2001:db8:1::2\")" &>/dev/null
+	check_fail $? "Wrong *,G entry source list, 2001:db8:1::2 entry still exists"
+
+	brmcast_check_sg_entries "allow" "${X[@]}"
+
+	brmcast_check_sg_state 0 "${X[@]}"
+
+	brmcast_check_sg_fwding 1 "${X[@]}"
+	brmcast_check_sg_fwding 0 2001:db8:1::100
+
+	log_test "MLDv2 group $TEST_GROUP exclude timeout"
+
+	ip link set dev br0 type bridge mcast_query_interval 12500 \
+					mcast_query_response_interval 1000
+
+	mldv2cleanup $swp1
+}
+
 trap cleanup EXIT
 
 setup_prepare
Signature · 1 line
2.25.4
author maintainer
#16 lore raw

PATCH 16/16 selftests: net: bridge: add test for mldv2 *,g auto-add

In reply to Nikolay Aleksandrov

From: Nikolay Aleksandrov <[email protected]>

When we have *,G ports in exclude mode and a new S,G,port is added the kernel has to automatically create an S,G entry for each exclude port to get proper forwarding.

---
 .../selftests/net/forwarding/bridge_mld.sh    | 31 ++++++++++++++++++-
 1 file changed, 30 insertions(+), 1 deletion(-)
tools/testing/selftests/net/forwarding/bridge_mld.sh +30 -1
index b34cf4c6ceba..ffdcfa87ca2b 100755
@@ -4,7 +4,7 @@
 ALL_TESTS="mldv2include_test mldv2inc_allow_test mldv2inc_is_include_test mldv2inc_is_exclude_test \
 	   mldv2inc_to_exclude_test mldv2exc_allow_test mldv2exc_is_include_test \
 	   mldv2exc_is_exclude_test mldv2exc_to_exclude_test mldv2inc_block_test \
-	   mldv2exc_block_test mldv2exc_timeout_test"
+	   mldv2exc_block_test mldv2exc_timeout_test mldv2star_ex_auto_add_test"
 NUM_NETIFS=4
 CHECK_TC="yes"
 TEST_GROUP="ff02::cc"
@@ -519,6 +519,35 @@ mldv2exc_timeout_test()
 	mldv2cleanup $swp1
 }
 
+mldv2star_ex_auto_add_test()
+{
+	RET=0
+
+	mldv2exclude_prepare $h1
+
+	$MZ $h2 -c 1 $MZPKT_IS_INC -q
+	sleep 1
+	bridge -j -d -s mdb show dev br0 \
+		| jq -e ".[].mdb[] | \
+			 select(.grp == \"$TEST_GROUP\" and .src == \"2001:db8:1::3\" and \
+				.port == \"$swp1\")" &>/dev/null
+	check_err $? "S,G entry for *,G port doesn't exist"
+
+	bridge -j -d -s mdb show dev br0 \
+		| jq -e ".[].mdb[] | \
+			 select(.grp == \"$TEST_GROUP\" and .src == \"2001:db8:1::3\" and \
+				.port == \"$swp1\" and \
+				.flags[] == \"added_by_star_ex\")" &>/dev/null
+	check_err $? "Auto-added S,G entry doesn't have added_by_star_ex flag"
+
+	brmcast_check_sg_fwding 1 2001:db8:1::3
+
+	log_test "MLDv2 S,G port entry automatic add to a *,G port"
+
+	mldv2cleanup $swp1
+	mldv2cleanup $swp2
+}
+
 trap cleanup EXIT
 
 setup_prepare
Signature · 1 line
2.25.4
maintainer Applied
#17 lore raw
In reply to Nikolay Aleksandrov
Quoted 24 lines · On Tue, 3 Nov 2020 19:23:56 +0200 Nikolay Aleksandrov wrote:

This is the second selftests patch-set for the new multicast functionality which adds tests for the bridge's MLDv2 support. The tests use full precooked packets which are sent via mausezahn and the resulting state after each test is checked for proper X,Y sets, (*,G) source list, source list entry timers, (S,G) existence and flags, packet forwarding and blocking, exclude group expiration and (*,G) auto-add. The first 3 patches factor out common functions which are used by IGMPv3 tests in lib.sh and add support for IPv6 test UDP packet, then patch 4 adds the first test with the initial MLDv2 setup.
The following new tests are added:
- base case: MLDv2 report ff02::cc is_include
- include -> allow report
- include -> is_include report
- include -> is_exclude report
- include -> to_exclude report
- exclude -> allow report
- exclude -> is_include report
- exclude -> is_exclude report
- exclude -> to_exclude report
- include -> block report
- exclude -> block report
- exclude timeout (move to include + entry deletion)
- S,G port entry automatic add to a *,G,exclude port

Quoted 2 lines

The variable names and set notation are the same as per RFC 3810, for more information check RFC 3810 sections 2.3 and 7.

Applied, thank you!