r8152 changes
Subsystems (4)
cover r8152 changes
Hi,
these are some changes for r8152.
At first I just wanted to add support for rtl8156 (which supports 2500baseT), by porting from Realtek's out-of-tree driver.
It instead turned out into cosmetic changes first, though.
Please review this. I would much like to try to port rtl8156 after these patches are merged, so that _modify functions can be used. Thanks.
Marek
Marek Behún (5):
r8152: use generic USB macros to define product table
r8152: cosmetic improvement of product table macro
r8152: add MCU typed read/write functions
r8152: rename r8153_phy_status to r8153_phy_status_wait
r8152: use *_modify helpers instead of read/write combos
drivers/net/usb/r8152.c | 1156 +++++++++++++-------------------------- 1 file changed, 387 insertions(+), 769 deletions(-)
base-commit: 6d89076e6ef09337a29a7b1ea4fdf2d892be9650
Signature · 1 line
2.26.2
PATCH 1/5 r8152: use generic USB macros to define product table
We can now use macros USB_DEVICE_INTERFACE_CLASS and USB_DEVICE_AND_INTERFACE_INFO to define r8152 product table.
--- drivers/net/usb/r8152.c | 16 ++++------------ 1 file changed, 4 insertions(+), 12 deletions(-)
drivers/net/usb/r8152.c +4 -12
@@ -6862,20 +6862,12 @@ static void rtl8152_disconnect(struct usb_interface *intf) }#define REALTEK_USB_DEVICE (vend, prod) \ - .match_flags = USB_DEVICE_ID_MATCH_DEVICE | \ - USB_DEVICE_ID_MATCH_INT_CLASS, \ - .idVendor = (vend), \ - .idProduct = (prod), \ - .bInterfaceClass = USB_CLASS_VENDOR_SPEC \ + USB_DEVICE_INTERFACE_CLASS(vend, prod, USB_CLASS_VENDOR_SPEC) \ }, \ { \ - .match_flags = USB_DEVICE_ID_MATCH_INT_INFO | \ - USB_DEVICE_ID_MATCH_DEVICE, \ - .idVendor = (vend), \ - .idProduct = (prod), \ - .bInterfaceClass = USB_CLASS_COMM, \ - .bInterfaceSubClass = USB_CDC_SUBCLASS_ETHERNET, \ - .bInterfaceProtocol = USB_CDC_PROTO_NONE + USB_DEVICE_AND_INTERFACE_INFO(vend, prod, USB_CLASS_COMM, \ + USB_CDC_SUBCLASS_ETHERNET, \ + USB_CDC_PROTO_NONE)/* table of devices that work with this driver */ static const struct usb_device_id rtl8152_table[] = {
Signature · 1 line
2.26.2
RE: [PATCH net-next 1/5] r8152: use generic USB macros to define product table
Marek Behún <[email protected]>
Quoted 30 lines
Sent: Wednesday, November 4, 2020 3:22 AM
drivers/net/usb/r8152.c +4
-12@@ -6862,20 +6862,12 @@ static void rtl8152_disconnect(struct usb_interface *intf) }#define REALTEK_USB_DEVICE (vend, prod) \ - .match_flags = USB_DEVICE_ID_MATCH_DEVICE | \ - USB_DEVICE_ID_MATCH_INT_CLASS, \ - .idVendor = (vend), \ - .idProduct = (prod), \ - .bInterfaceClass = USB_CLASS_VENDOR_SPEC \ + USB_DEVICE_INTERFACE_CLASS(vend, prod, USB_CLASS_VENDOR_SPEC) \ }, \ { \ - .match_flags = USB_DEVICE_ID_MATCH_INT_INFO | \ - USB_DEVICE_ID_MATCH_DEVICE, \ - .idVendor = (vend), \ - .idProduct = (prod), \ - .bInterfaceClass = USB_CLASS_COMM, \ - .bInterfaceSubClass = USB_CDC_SUBCLASS_ETHERNET, \ - .bInterfaceProtocol = USB_CDC_PROTO_NONE +USB_DEVICE_AND_INTERFACE_INFO (vend, prod,USB_CLASS_COMM , \ +USB_CDC_SUBCLASS_ETHERNET , \ +USB_CDC_PROTO_NONE )
Quoted 2 lines
/* table of devices that work with this driver */ static const struct
usb_device_idrtl8152_table[] = {
I don't use these, because checkpatch.pl would show error.
$ scripts/checkpatch.pl --file --terse drivers/net/usb/r8152.c ERROR: Macros with complex values should be enclosed in parentheses
Best Regards,
Hayes
Re: [PATCH net-next 1/5] r8152: use generic USB macros to define product table
Quoted 36 lines · On Wed, 4 Nov 2020 01:57:10 +0000 Hayes Wang <[email protected]> wrote:
Marek Behún <[email protected]>
Quoted 30 lines
Sent: Wednesday, November 4, 2020 3:22 AM
drivers/net/usb/r8152.c +4
-12@@ -6862,20 +6862,12 @@ static void rtl8152_disconnect(struct usb_interface *intf) }#define REALTEK_USB_DEVICE (vend, prod) \ - .match_flags = USB_DEVICE_ID_MATCH_DEVICE | \ - USB_DEVICE_ID_MATCH_INT_CLASS, \ - .idVendor = (vend), \ - .idProduct = (prod), \ - .bInterfaceClass = USB_CLASS_VENDOR_SPEC \ + USB_DEVICE_INTERFACE_CLASS(vend, prod, USB_CLASS_VENDOR_SPEC) \ }, \ { \ - .match_flags = USB_DEVICE_ID_MATCH_INT_INFO | \ - USB_DEVICE_ID_MATCH_DEVICE, \ - .idVendor = (vend), \ - .idProduct = (prod), \ - .bInterfaceClass = USB_CLASS_COMM, \ - .bInterfaceSubClass = USB_CDC_SUBCLASS_ETHERNET, \ - .bInterfaceProtocol = USB_CDC_PROTO_NONE +USB_DEVICE_AND_INTERFACE_INFO (vend, prod,USB_CLASS_COMM , \ +USB_CDC_SUBCLASS_ETHERNET , \ +USB_CDC_PROTO_NONE )Quoted 2 lines
/* table of devices that work with this driver */ static const struct
usb_device_idrtl8152_table[] = {I don't use these, because checkpatch.pl would show error.
Quoted 6 lines
$ scripts/checkpatch.pl --file --terse drivers/net/usb/r8152.c ERROR: Macros with complex values should be enclosed in parenthesesBest Regards,
Hayes
Hmm, checkpatch did not emit no warnings for me on these patches. Just two CHECKs for the third patch.
BTW Hayes, is it possible for me gaining access to Realtek documentation for these chips under NDA? For example via my employer, CZ.NIC? I can't find any such information on Realtek website.
Also I could not download the driver from Realtek's website, I had to find it on github. When clicking the download button on [1], it says:
Warning
The form #10 does not exist or it is not published.
BTW2 I am interested whether we can make the internal PHY visible to the Linux PHY subsystem.
Marek
RE: [PATCH net-next 1/5] r8152: use generic USB macros to define product table
Marek Behún <[email protected]>
Quoted 1 line
Sent: Wednesday, November 4, 2020 2:03 PM
[...]
Quoted 3 lines
BTW Hayes, is it possible for me gaining access to Realtek documentation for these chips under NDA? For example via my employer, CZ.NIC? I can't find any such information on Realtek website.
I have to ask my boss.
Maybe I reply you in private when I get the answer.
Quoted 4 lines
Also I could not download the driver from Realtek's website, I had to find it on github. When clicking the download button on [1], it says:
Warning
The form #10 does not exist or it is not published.
I try to download the driver from our website.
And it seem to work fine.
I will send it to you later.
Quoted 2 lines
BTW2 I am interested whether we can make the internal PHY visible to the Linux PHY subsystem.
I think it is possible.
I am not familiar with the Linux PHY subsystem, so I have no idea about how to start.
Best Regards,
Hayes
Re: [PATCH net-next 1/5] r8152: use generic USB macros to define product table
In reply to Hayes WangQuoted 31 lines · Hayes Wang
Marek Behún <[email protected]>
Quoted 30 lines
Sent: Wednesday, November 4, 2020 3:22 AM
drivers/net/usb/r8152.c +4
-12@@ -6862,20 +6862,12 @@ static void rtl8152_disconnect(struct usb_interface *intf) }#define REALTEK_USB_DEVICE (vend, prod) \ - .match_flags = USB_DEVICE_ID_MATCH_DEVICE | \ - USB_DEVICE_ID_MATCH_INT_CLASS, \ - .idVendor = (vend), \ - .idProduct = (prod), \ - .bInterfaceClass = USB_CLASS_VENDOR_SPEC \ + USB_DEVICE_INTERFACE_CLASS(vend, prod, USB_CLASS_VENDOR_SPEC) \ }, \ { \ - .match_flags = USB_DEVICE_ID_MATCH_INT_INFO | \ - USB_DEVICE_ID_MATCH_DEVICE, \ - .idVendor = (vend), \ - .idProduct = (prod), \ - .bInterfaceClass = USB_CLASS_COMM, \ - .bInterfaceSubClass = USB_CDC_SUBCLASS_ETHERNET, \ - .bInterfaceProtocol = USB_CDC_PROTO_NONE +USB_DEVICE_AND_INTERFACE_INFO (vend, prod,USB_CLASS_COMM , \ +USB_CDC_SUBCLASS_ETHERNET , \ +USB_CDC_PROTO_NONE )
Quoted 7 lines
Quoted 2 lines
/* table of devices that work with this driver */ static const struct
usb_device_idrtl8152_table[] = {I don't use these, because checkpatch.pl would show error.
$ scripts/checkpatch.pl --file --terse drivers/net/usb/r8152.c ERROR: Macros with complex values should be enclosed in parentheses
checkpatch is wrong.
PATCH 2/5 r8152: cosmetic improvement of product table macro
In reply to Marek BehúnImprove macro REALTEK_USB_DEVICE cosmetically so that it defines complete members.
--- drivers/net/usb/r8152.c | 44 ++++++++++++++++++++--------------------- 1 file changed, 21 insertions(+), 23 deletions(-)
drivers/net/usb/r8152.c +21 -23
@@ -6862,33 +6862,31 @@ static void rtl8152_disconnect(struct usb_interface *intf) }#define REALTEK_USB_DEVICE (vend, prod) \ - USB_DEVICE_INTERFACE_CLASS(vend, prod, USB_CLASS_VENDOR_SPEC) \ -}, \ -{ \ - USB_DEVICE_AND_INTERFACE_INFO(vend, prod, USB_CLASS_COMM, \ + { USB_DEVICE_INTERFACE_CLASS(vend, prod, USB_CLASS_VENDOR_SPEC) }, \ + { USB_DEVICE_AND_INTERFACE_INFO(vend, prod, USB_CLASS_COMM, \ USB_CDC_SUBCLASS_ETHERNET, \ - USB_CDC_PROTO_NONE) + USB_CDC_PROTO_NONE) }/* table of devices that work with this driver */ static const struct usb_device_id rtl8152_table[] = { - {REALTEK_USB_DEVICE (VENDOR_ID_REALTEK ,0x8050 )}, - {REALTEK_USB_DEVICE (VENDOR_ID_REALTEK ,0x8152 )}, - {REALTEK_USB_DEVICE (VENDOR_ID_REALTEK ,0x8153 )}, - {REALTEK_USB_DEVICE (VENDOR_ID_MICROSOFT ,0x07ab )}, - {REALTEK_USB_DEVICE (VENDOR_ID_MICROSOFT ,0x07c6 )}, - {REALTEK_USB_DEVICE (VENDOR_ID_MICROSOFT ,0x0927 )}, - {REALTEK_USB_DEVICE (VENDOR_ID_SAMSUNG ,0xa101 )}, - {REALTEK_USB_DEVICE (VENDOR_ID_LENOVO ,0x304f )}, - {REALTEK_USB_DEVICE (VENDOR_ID_LENOVO ,0x3062 )}, - {REALTEK_USB_DEVICE (VENDOR_ID_LENOVO ,0x3069 )}, - {REALTEK_USB_DEVICE (VENDOR_ID_LENOVO ,0x3082 )}, - {REALTEK_USB_DEVICE (VENDOR_ID_LENOVO ,0x7205 )}, - {REALTEK_USB_DEVICE (VENDOR_ID_LENOVO ,0x720c )}, - {REALTEK_USB_DEVICE (VENDOR_ID_LENOVO ,0x7214 )}, - {REALTEK_USB_DEVICE (VENDOR_ID_LENOVO ,0xa387 )}, - {REALTEK_USB_DEVICE (VENDOR_ID_LINKSYS ,0x0041 )}, - {REALTEK_USB_DEVICE (VENDOR_ID_NVIDIA ,0x09ff )}, - {REALTEK_USB_DEVICE (VENDOR_ID_TPLINK ,0x0601 )}, +REALTEK_USB_DEVICE (VENDOR_ID_REALTEK ,0x8050 ), +REALTEK_USB_DEVICE (VENDOR_ID_REALTEK ,0x8152 ), +REALTEK_USB_DEVICE (VENDOR_ID_REALTEK ,0x8153 ), +REALTEK_USB_DEVICE (VENDOR_ID_MICROSOFT ,0x07ab ), +REALTEK_USB_DEVICE (VENDOR_ID_MICROSOFT ,0x07c6 ), +REALTEK_USB_DEVICE (VENDOR_ID_MICROSOFT ,0x0927 ), +REALTEK_USB_DEVICE (VENDOR_ID_SAMSUNG ,0xa101 ), +REALTEK_USB_DEVICE (VENDOR_ID_LENOVO ,0x304f ), +REALTEK_USB_DEVICE (VENDOR_ID_LENOVO ,0x3062 ), +REALTEK_USB_DEVICE (VENDOR_ID_LENOVO ,0x3069 ), +REALTEK_USB_DEVICE (VENDOR_ID_LENOVO ,0x3082 ), +REALTEK_USB_DEVICE (VENDOR_ID_LENOVO ,0x7205 ), +REALTEK_USB_DEVICE (VENDOR_ID_LENOVO ,0x720c ), +REALTEK_USB_DEVICE (VENDOR_ID_LENOVO ,0x7214 ), +REALTEK_USB_DEVICE (VENDOR_ID_LENOVO ,0xa387 ), +REALTEK_USB_DEVICE (VENDOR_ID_LINKSYS ,0x0041 ), +REALTEK_USB_DEVICE (VENDOR_ID_NVIDIA ,0x09ff ), +REALTEK_USB_DEVICE (VENDOR_ID_TPLINK ,0x0601 ), {} };
Signature · 1 line
2.26.2
PATCH 3/5 r8152: add MCU typed read/write functions
In reply to Marek BehúnAdd pla_ and usb_ prefixed versions of ocp_read_* and ocp_write_* functions. This saves us from always writing MCU_TYPE_PLA/MCU_TYPE_USB as parameter.
--- drivers/net/usb/r8152.c | 673 ++++++++++++++++++++-------------------- 1 file changed, 338 insertions(+), 335 deletions(-)
drivers/net/usb/r8152.c +338 -335
@@ -1305,18 +1305,37 @@ static void ocp_write_byte(struct r8152 *tp, u16 type, u16 index, u32 data)generic_ocp_write (tp, index, byen,sizeof (tmp), &tmp, type); } +#define DEFINE_FUNCS_FOR_MCU_TYPE (_p, _mcutype, _t, _n) \ +static inline _t _p ## _ocp_read_ ## _n(struct r8152 *tp, u16 index) \ +{ \ + return ocp_read_ ## _n(tp, _mcutype, index); \ +} \ +static inline void _p ## _ocp_write_ ## _n(struct r8152 *tp, u16 index, \ + _t data) \ +{ \ + ocp_write_ ## _n(tp, _mcutype, index, data); \ +} + +DEFINE_FUNCS_FOR_MCU_TYPE(pla, MCU_TYPE_PLA, u8, byte) +DEFINE_FUNCS_FOR_MCU_TYPE(pla, MCU_TYPE_PLA, u16, word) +DEFINE_FUNCS_FOR_MCU_TYPE(pla, MCU_TYPE_PLA, u32, dword) + +DEFINE_FUNCS_FOR_MCU_TYPE(usb, MCU_TYPE_USB, u8, byte) +DEFINE_FUNCS_FOR_MCU_TYPE(usb, MCU_TYPE_USB, u16, word) +DEFINE_FUNCS_FOR_MCU_TYPE(usb, MCU_TYPE_USB, u32, dword) +static u16 ocp_reg_read (struct r8152 *tp,u16 addr) {u16 ocp_base, ocp_index; ocp_base = addr &0xf000 ;if (ocp_base != tp->ocp_base) { -ocp_write_word (tp,MCU_TYPE_PLA ,PLA_OCP_GPHY_BASE , ocp_base); +pla_ocp_write_word (tp,PLA_OCP_GPHY_BASE , ocp_base); tp->ocp_base = ocp_base; } ocp_index = (addr &0x0fff ) |0xb000 ; -return ocp_read_word (tp,MCU_TYPE_PLA , ocp_index); +return pla_ocp_read_word (tp, ocp_index); }static void ocp_reg_write (struct r8152 *tp,u16 addr,u16 data)
@@ -1325,12 +1344,12 @@ static void ocp_reg_write(struct r8152 *tp, u16 addr, u16 data) ocp_base = addr &0xf000 ;if (ocp_base != tp->ocp_base) { -ocp_write_word (tp,MCU_TYPE_PLA ,PLA_OCP_GPHY_BASE , ocp_base); +pla_ocp_write_word (tp,PLA_OCP_GPHY_BASE , ocp_base); tp->ocp_base = ocp_base; } ocp_index = (addr &0x0fff ) |0xb000 ; -ocp_write_word (tp,MCU_TYPE_PLA , ocp_index, data); +pla_ocp_write_word (tp, ocp_index, data); }static inline void r8152_mdio_write (struct r8152 *tp,u32 reg_addr,u32 value)
@@ -1405,9 +1424,9 @@ static int rtl8152_set_mac_address(struct net_device *netdev, void *p)memcpy (netdev->dev_addr, addr->sa_data, netdev->addr_len); -ocp_write_byte (tp,MCU_TYPE_PLA ,PLA_CRWECR ,CRWECR_CONFIG ); +pla_ocp_write_byte (tp,PLA_CRWECR ,CRWECR_CONFIG );pla_ocp_write (tp,PLA_IDR ,BYTE_EN_SIX_BYTES ,8 , addr->sa_data); -ocp_write_byte (tp,MCU_TYPE_PLA ,PLA_CRWECR ,CRWECR_NORAML ); +pla_ocp_write_byte (tp,PLA_CRWECR ,CRWECR_NORAML );mutex_unlock (&tp->control);
@@ -1438,10 +1457,10 @@ static int vendor_mac_passthru_addr_read(struct r8152 *tp, struct sockaddr *sa) mac_strlen =0x16 ; }else {/* test for -AD variant of RTL8153 */ - ocp_data =ocp_read_word (tp,MCU_TYPE_USB ,USB_MISC_0 ); + ocp_data =usb_ocp_read_word (tp,USB_MISC_0 );if ((ocp_data &AD_MASK ) ==0x1000 ) {/* test for MAC address pass-through bit */ - ocp_data =ocp_read_byte (tp,MCU_TYPE_USB ,EFUSE ); + ocp_data =usb_ocp_read_byte (tp,EFUSE );if ((ocp_data &PASS_THRU_MASK ) !=1 ) {netif_dbg (tp, probe, tp->netdev,"No efuse for RTL8153-AD MAC pass through\n" );
@@ -1449,7 +1468,7 @@ static int vendor_mac_passthru_addr_read(struct r8152 *tp, struct sockaddr *sa) } }else {/* test for RTL8153-BND and RTL8153-BD */ - ocp_data =ocp_read_byte (tp,MCU_TYPE_USB ,USB_MISC_1 ); + ocp_data =usb_ocp_read_byte (tp,USB_MISC_1 );if ((ocp_data &BND_MASK ) ==0 && (ocp_data &BD_MASK ) ==0 ) {netif_dbg (tp, probe, tp->netdev,"Invalid variant for MAC pass through\n" );
@@ -2533,7 +2552,7 @@ static void _rtl8152_set_rx_mode(struct net_device *netdev)u32 ocp_data;netif_stop_queue (netdev); - ocp_data =ocp_read_dword (tp,MCU_TYPE_PLA ,PLA_RCR ); + ocp_data =pla_ocp_read_dword (tp,PLA_RCR ); ocp_data &= ~RCR_ACPT_ALL ; ocp_data |=RCR_AB |RCR_APM ;
@@ -2566,7 +2585,7 @@ static void _rtl8152_set_rx_mode(struct net_device *netdev) tmp[1 ] =__cpu_to_le32 (swab32 (mc_filter[0 ]));pla_ocp_write (tp,PLA_MAR ,BYTE_EN_DWORD ,sizeof (tmp), tmp); -ocp_write_dword (tp,MCU_TYPE_PLA ,PLA_RCR , ocp_data); +pla_ocp_write_dword (tp,PLA_RCR , ocp_data);netif_wake_queue (netdev); }
@@ -2614,21 +2633,21 @@ static void r8152b_reset_packet_filter(struct r8152 *tp) {u32 ocp_data; - ocp_data =ocp_read_word (tp,MCU_TYPE_PLA ,PLA_FMC ); + ocp_data =pla_ocp_read_word (tp,PLA_FMC ); ocp_data &= ~FMC_FCR_MCU_EN ; -ocp_write_word (tp,MCU_TYPE_PLA ,PLA_FMC , ocp_data); +pla_ocp_write_word (tp,PLA_FMC , ocp_data); ocp_data |=FMC_FCR_MCU_EN ; -ocp_write_word (tp,MCU_TYPE_PLA ,PLA_FMC , ocp_data); +pla_ocp_write_word (tp,PLA_FMC , ocp_data); }static void rtl8152_nic_reset (struct r8152 *tp) {int i; -ocp_write_byte (tp,MCU_TYPE_PLA ,PLA_CR ,CR_RST ); +pla_ocp_write_byte (tp,PLA_CR ,CR_RST );for (i =0 ; i <1000 ; i++) { -if (!(ocp_read_byte (tp,MCU_TYPE_PLA ,PLA_CR ) &CR_RST )) +if (!(pla_ocp_read_byte (tp,PLA_CR ) &CR_RST ))break ;usleep_range (100 ,400 ); }
@@ -2644,7 +2663,7 @@ static void set_tx_qlen(struct r8152 *tp)static inline u8 rtl8152_get_speed (struct r8152 *tp) { -return ocp_read_byte (tp,MCU_TYPE_PLA ,PLA_PHYSTATUS ); +return pla_ocp_read_byte (tp,PLA_PHYSTATUS ); }static void rtl_set_eee_plus (struct r8152 *tp)
@@ -2654,13 +2673,13 @@ static void rtl_set_eee_plus(struct r8152 *tp) speed =rtl8152_get_speed (tp);if (speed & _10bps) { - ocp_data =ocp_read_word (tp,MCU_TYPE_PLA ,PLA_EEEP_CR ); + ocp_data =pla_ocp_read_word (tp,PLA_EEEP_CR ); ocp_data |=EEEP_CR_EEEP_TX ; -ocp_write_word (tp,MCU_TYPE_PLA ,PLA_EEEP_CR , ocp_data); +pla_ocp_write_word (tp,PLA_EEEP_CR , ocp_data); }else { - ocp_data =ocp_read_word (tp,MCU_TYPE_PLA ,PLA_EEEP_CR ); + ocp_data =pla_ocp_read_word (tp,PLA_EEEP_CR ); ocp_data &= ~EEEP_CR_EEEP_TX ; -ocp_write_word (tp,MCU_TYPE_PLA ,PLA_EEEP_CR , ocp_data); +pla_ocp_write_word (tp,PLA_EEEP_CR , ocp_data); } }
@@ -2668,12 +2687,12 @@ static void rxdy_gated_en(struct r8152 *tp, bool enable) {u32 ocp_data; - ocp_data =ocp_read_word (tp,MCU_TYPE_PLA ,PLA_MISC_1 ); + ocp_data =pla_ocp_read_word (tp,PLA_MISC_1 );if (enable) ocp_data |=RXDY_GATED_EN ;else ocp_data &= ~RXDY_GATED_EN ; -ocp_write_word (tp,MCU_TYPE_PLA ,PLA_MISC_1 , ocp_data); +pla_ocp_write_word (tp,PLA_MISC_1 , ocp_data); }static int rtl_start_rx (struct r8152 *tp)
@@ -2761,8 +2780,7 @@ static int rtl_stop_rx(struct r8152 *tp)static inline void r8153b_rx_agg_chg_indicate (struct r8152 *tp) { -ocp_write_byte (tp,MCU_TYPE_USB ,USB_UPT_RXDMA_OWN , -OWN_UPDATE |OWN_CLEAR ); +usb_ocp_write_byte (tp,USB_UPT_RXDMA_OWN ,OWN_UPDATE |OWN_CLEAR ); }static int rtl_enable (struct r8152 *tp)
@@ -2771,9 +2789,9 @@ static int rtl_enable(struct r8152 *tp)r8152b_reset_packet_filter (tp); - ocp_data =ocp_read_byte (tp,MCU_TYPE_PLA ,PLA_CR ); + ocp_data =pla_ocp_read_byte (tp,PLA_CR ); ocp_data |=CR_RE |CR_TE ; -ocp_write_byte (tp,MCU_TYPE_PLA ,PLA_CR , ocp_data); +pla_ocp_write_byte (tp,PLA_CR , ocp_data);switch (tp->version) {case RTL_VER_08 :
@@ -2809,8 +2827,7 @@ static void r8153_set_rx_early_timeout(struct r8152 *tp)case RTL_VER_04 :case RTL_VER_05 :case RTL_VER_06 : -ocp_write_word (tp,MCU_TYPE_USB ,USB_RX_EARLY_TIMEOUT , - ocp_data); +usb_ocp_write_word (tp,USB_RX_EARLY_TIMEOUT , ocp_data);break ;case RTL_VER_08 :
@@ -2818,10 +2835,8 @@ static void r8153_set_rx_early_timeout(struct r8152 *tp)/* The RTL8153B uses USB_RX_EXTRA_AGGR_TMR for rx timeout * primarily. For USB_RX_EARLY_TIMEOUT, we fix it to 128ns. */ -ocp_write_word (tp,MCU_TYPE_USB ,USB_RX_EARLY_TIMEOUT , -128 /8 ); -ocp_write_word (tp,MCU_TYPE_USB ,USB_RX_EXTRA_AGGR_TMR , - ocp_data); +usb_ocp_write_word (tp,USB_RX_EARLY_TIMEOUT ,128 /8 ); +usb_ocp_write_word (tp,USB_RX_EXTRA_AGGR_TMR , ocp_data);break ;default :
@@ -2838,13 +2853,11 @@ static void r8153_set_rx_early_size(struct r8152 *tp)case RTL_VER_04 :case RTL_VER_05 :case RTL_VER_06 : -ocp_write_word (tp,MCU_TYPE_USB ,USB_RX_EARLY_SIZE , - ocp_data /4 ); +usb_ocp_write_word (tp,USB_RX_EARLY_SIZE , ocp_data /4 );break ;case RTL_VER_08 :case RTL_VER_09 : -ocp_write_word (tp,MCU_TYPE_USB ,USB_RX_EARLY_SIZE , - ocp_data /8 ); +usb_ocp_write_word (tp,USB_RX_EARLY_SIZE , ocp_data /8 );break ;default :WARN_ON_ONCE (1 );
@@ -2865,12 +2878,12 @@ static int rtl8153_enable(struct r8152 *tp)if (tp->version ==RTL_VER_09 ) {u32 ocp_data; - ocp_data =ocp_read_word (tp,MCU_TYPE_USB ,USB_FW_TASK ); + ocp_data =usb_ocp_read_word (tp,USB_FW_TASK ); ocp_data &= ~FC_PATCH_TASK ; -ocp_write_word (tp,MCU_TYPE_USB ,USB_FW_TASK , ocp_data); +usb_ocp_write_word (tp,USB_FW_TASK , ocp_data);usleep_range (1000 ,2000 ); ocp_data |=FC_PATCH_TASK ; -ocp_write_word (tp,MCU_TYPE_USB ,USB_FW_TASK , ocp_data); +usb_ocp_write_word (tp,USB_FW_TASK , ocp_data); }return rtl_enable (tp);
@@ -2886,9 +2899,9 @@ static void rtl_disable(struct r8152 *tp)return ; } - ocp_data =ocp_read_dword (tp,MCU_TYPE_PLA ,PLA_RCR ); + ocp_data =pla_ocp_read_dword (tp,PLA_RCR ); ocp_data &= ~RCR_ACPT_ALL ; -ocp_write_dword (tp,MCU_TYPE_PLA ,PLA_RCR , ocp_data); +pla_ocp_write_dword (tp,PLA_RCR , ocp_data);rtl_drop_queued_tx (tp);
@@ -2898,14 +2911,14 @@ static void rtl_disable(struct r8152 *tp)rxdy_gated_en (tp, true);for (i =0 ; i <1000 ; i++) { - ocp_data =ocp_read_byte (tp,MCU_TYPE_PLA ,PLA_OOB_CTRL ); + ocp_data =pla_ocp_read_byte (tp,PLA_OOB_CTRL );if ((ocp_data &FIFO_EMPTY ) ==FIFO_EMPTY )break ;usleep_range (1000 ,2000 ); }for (i =0 ; i <1000 ; i++) { -if (ocp_read_word (tp,MCU_TYPE_PLA ,PLA_TCR0 ) &TCR0_TX_EMPTY ) +if (pla_ocp_read_word (tp,PLA_TCR0 ) &TCR0_TX_EMPTY )break ;usleep_range (1000 ,2000 ); }
@@ -2919,28 +2932,28 @@ static void r8152_power_cut_en(struct r8152 *tp, bool enable) {u32 ocp_data; - ocp_data =ocp_read_word (tp,MCU_TYPE_USB ,USB_UPS_CTRL ); + ocp_data =usb_ocp_read_word (tp,USB_UPS_CTRL );if (enable) ocp_data |=POWER_CUT ;else ocp_data &= ~POWER_CUT ; -ocp_write_word (tp,MCU_TYPE_USB ,USB_UPS_CTRL , ocp_data); +usb_ocp_write_word (tp,USB_UPS_CTRL , ocp_data); - ocp_data =ocp_read_word (tp,MCU_TYPE_USB ,USB_PM_CTRL_STATUS ); + ocp_data =usb_ocp_read_word (tp,USB_PM_CTRL_STATUS ); ocp_data &= ~RESUME_INDICATE ; -ocp_write_word (tp,MCU_TYPE_USB ,USB_PM_CTRL_STATUS , ocp_data); +usb_ocp_write_word (tp,USB_PM_CTRL_STATUS , ocp_data); }static void rtl_rx_vlan_en (struct r8152 *tp,bool enable) {u32 ocp_data; - ocp_data =ocp_read_word (tp,MCU_TYPE_PLA ,PLA_CPCR ); + ocp_data =pla_ocp_read_word (tp,PLA_CPCR );if (enable) ocp_data |=CPCR_RX_VLAN ;else ocp_data &= ~CPCR_RX_VLAN ; -ocp_write_word (tp,MCU_TYPE_PLA ,PLA_CPCR , ocp_data); +pla_ocp_write_word (tp,PLA_CPCR , ocp_data); } static int rtl8152_set_features(struct net_device *dev,
@@ -2978,11 +2991,11 @@ static u32 __rtl_get_wol(struct r8152 *tp)u32 ocp_data;u32 wolopts =0 ; - ocp_data =ocp_read_word (tp,MCU_TYPE_PLA ,PLA_CONFIG34 ); + ocp_data =pla_ocp_read_word (tp,PLA_CONFIG34 );if (ocp_data &LINK_ON_WAKE_EN ) wolopts |=WAKE_PHY ; - ocp_data =ocp_read_word (tp,MCU_TYPE_PLA ,PLA_CONFIG5 ); + ocp_data =pla_ocp_read_word (tp,PLA_CONFIG5 );if (ocp_data &UWF_EN ) wolopts |=WAKE_UCAST ;if (ocp_data &BWF_EN )
@@ -2990,7 +3003,7 @@ static u32 __rtl_get_wol(struct r8152 *tp)if (ocp_data &MWF_EN ) wolopts |=WAKE_MCAST ; - ocp_data =ocp_read_word (tp,MCU_TYPE_PLA ,PLA_CFG_WOL ); + ocp_data =pla_ocp_read_word (tp,PLA_CFG_WOL );if (ocp_data &MAGIC_EN ) wolopts |=WAKE_MAGIC ;
@@ -3001,15 +3014,15 @@ static void __rtl_set_wol(struct r8152 *tp, u32 wolopts) {u32 ocp_data; -ocp_write_byte (tp,MCU_TYPE_PLA ,PLA_CRWECR ,CRWECR_CONFIG ); +pla_ocp_write_byte (tp,PLA_CRWECR ,CRWECR_CONFIG ); - ocp_data =ocp_read_word (tp,MCU_TYPE_PLA ,PLA_CONFIG34 ); + ocp_data =pla_ocp_read_word (tp,PLA_CONFIG34 ); ocp_data &= ~LINK_ON_WAKE_EN ;if (wolopts &WAKE_PHY ) ocp_data |=LINK_ON_WAKE_EN ; -ocp_write_word (tp,MCU_TYPE_PLA ,PLA_CONFIG34 , ocp_data); +pla_ocp_write_word (tp,PLA_CONFIG34 , ocp_data); - ocp_data =ocp_read_word (tp,MCU_TYPE_PLA ,PLA_CONFIG5 ); + ocp_data =pla_ocp_read_word (tp,PLA_CONFIG5 ); ocp_data &= ~(UWF_EN |BWF_EN |MWF_EN );if (wolopts &WAKE_UCAST ) ocp_data |=UWF_EN ;
@@ -3017,15 +3030,15 @@ static void __rtl_set_wol(struct r8152 *tp, u32 wolopts) ocp_data |=BWF_EN ;if (wolopts &WAKE_MCAST ) ocp_data |=MWF_EN ; -ocp_write_word (tp,MCU_TYPE_PLA ,PLA_CONFIG5 , ocp_data); +pla_ocp_write_word (tp,PLA_CONFIG5 , ocp_data); -ocp_write_byte (tp,MCU_TYPE_PLA ,PLA_CRWECR ,CRWECR_NORAML ); +pla_ocp_write_byte (tp,PLA_CRWECR ,CRWECR_NORAML ); - ocp_data =ocp_read_word (tp,MCU_TYPE_PLA ,PLA_CFG_WOL ); + ocp_data =pla_ocp_read_word (tp,PLA_CFG_WOL ); ocp_data &= ~MAGIC_EN ;if (wolopts &WAKE_MAGIC ) ocp_data |=MAGIC_EN ; -ocp_write_word (tp,MCU_TYPE_PLA ,PLA_CFG_WOL , ocp_data); +pla_ocp_write_word (tp,PLA_CFG_WOL , ocp_data);if (wolopts &WAKE_ANY )device_set_wakeup_enable (&tp->udev->dev, true);
@@ -3037,22 +3050,21 @@ static void r8153_mac_clk_spd(struct r8152 *tp, bool enable) {/* MAC clock speed down */ if (enable) { -ocp_write_word (tp,MCU_TYPE_PLA ,PLA_MAC_PWR_CTRL , -ALDPS_SPDWN_RATIO ); -ocp_write_word (tp,MCU_TYPE_PLA ,PLA_MAC_PWR_CTRL2 , -EEE_SPDWN_RATIO ); -ocp_write_word (tp,MCU_TYPE_PLA ,PLA_MAC_PWR_CTRL3 , -PKT_AVAIL_SPDWN_EN |SUSPEND_SPDWN_EN | -U1U2_SPDWN_EN |L1_SPDWN_EN ); -ocp_write_word (tp,MCU_TYPE_PLA ,PLA_MAC_PWR_CTRL4 , -PWRSAVE_SPDWN_EN |RXDV_SPDWN_EN |TX10MIDLE_EN | -TP100_SPDWN_EN |TP500_SPDWN_EN |EEE_SPDWN_EN | -TP1000_SPDWN_EN ); +pla_ocp_write_word (tp,PLA_MAC_PWR_CTRL ,ALDPS_SPDWN_RATIO ); +pla_ocp_write_word (tp,PLA_MAC_PWR_CTRL2 ,EEE_SPDWN_RATIO ); +pla_ocp_write_word (tp,PLA_MAC_PWR_CTRL3 , +PKT_AVAIL_SPDWN_EN |SUSPEND_SPDWN_EN | +U1U2_SPDWN_EN |L1_SPDWN_EN ); +pla_ocp_write_word (tp,PLA_MAC_PWR_CTRL4 , +PWRSAVE_SPDWN_EN |RXDV_SPDWN_EN | +TX10MIDLE_EN |TP100_SPDWN_EN | +TP500_SPDWN_EN |EEE_SPDWN_EN | +TP1000_SPDWN_EN ); }else { -ocp_write_word (tp,MCU_TYPE_PLA ,PLA_MAC_PWR_CTRL ,0 ); -ocp_write_word (tp,MCU_TYPE_PLA ,PLA_MAC_PWR_CTRL2 ,0 ); -ocp_write_word (tp,MCU_TYPE_PLA ,PLA_MAC_PWR_CTRL3 ,0 ); -ocp_write_word (tp,MCU_TYPE_PLA ,PLA_MAC_PWR_CTRL4 ,0 ); +pla_ocp_write_word (tp,PLA_MAC_PWR_CTRL ,0 ); +pla_ocp_write_word (tp,PLA_MAC_PWR_CTRL2 ,0 ); +pla_ocp_write_word (tp,PLA_MAC_PWR_CTRL3 ,0 ); +pla_ocp_write_word (tp,PLA_MAC_PWR_CTRL4 ,0 ); } }
@@ -3072,25 +3084,25 @@ static void r8153b_u1u2en(struct r8152 *tp, bool enable) {u32 ocp_data; - ocp_data =ocp_read_word (tp,MCU_TYPE_USB ,USB_LPM_CONFIG ); + ocp_data =usb_ocp_read_word (tp,USB_LPM_CONFIG );if (enable) ocp_data |=LPM_U1U2_EN ;else ocp_data &= ~LPM_U1U2_EN ; -ocp_write_word (tp,MCU_TYPE_USB ,USB_LPM_CONFIG , ocp_data); +usb_ocp_write_word (tp,USB_LPM_CONFIG , ocp_data); }static void r8153_u2p3en (struct r8152 *tp,bool enable) {u32 ocp_data; - ocp_data =ocp_read_word (tp,MCU_TYPE_USB ,USB_U2P3_CTRL ); + ocp_data =usb_ocp_read_word (tp,USB_U2P3_CTRL );if (enable) ocp_data |=U2P3_ENABLE ;else ocp_data &= ~U2P3_ENABLE ; -ocp_write_word (tp,MCU_TYPE_USB ,USB_U2P3_CTRL , ocp_data); +usb_ocp_write_word (tp,USB_U2P3_CTRL , ocp_data); }static void r8153b_ups_flags (struct r8152 *tp)
@@ -3162,7 +3174,7 @@ static void r8153b_ups_flags(struct r8152 *tp)break ; } -ocp_write_dword (tp,MCU_TYPE_USB ,USB_UPS_FLAGS , ups_flags); +usb_ocp_write_dword (tp,USB_UPS_FLAGS , ups_flags); }static void r8153b_green_en (struct r8152 *tp,bool enable)
@@ -3212,30 +3224,30 @@ static u16 r8153_phy_status(struct r8152 *tp, u16 desired)static void r8153b_ups_en (struct r8152 *tp,bool enable) { -u32 ocp_data =ocp_read_byte (tp,MCU_TYPE_USB ,USB_POWER_CUT ); +u32 ocp_data =usb_ocp_read_byte (tp,USB_POWER_CUT );if (enable) {r8153b_ups_flags (tp); ocp_data |=UPS_EN |USP_PREWAKE |PHASE2_EN ; -ocp_write_byte (tp,MCU_TYPE_USB ,USB_POWER_CUT , ocp_data); +usb_ocp_write_byte (tp,USB_POWER_CUT , ocp_data); - ocp_data =ocp_read_byte (tp,MCU_TYPE_USB ,0xcfff ); + ocp_data =usb_ocp_read_byte (tp,0xcfff ); ocp_data |=BIT (0 ); -ocp_write_byte (tp,MCU_TYPE_USB ,0xcfff , ocp_data); +usb_ocp_write_byte (tp,0xcfff , ocp_data); }else {u16 data; ocp_data &= ~(UPS_EN |USP_PREWAKE ); -ocp_write_byte (tp,MCU_TYPE_USB ,USB_POWER_CUT , ocp_data); +usb_ocp_write_byte (tp,USB_POWER_CUT , ocp_data); - ocp_data =ocp_read_byte (tp,MCU_TYPE_USB ,0xcfff ); + ocp_data =usb_ocp_read_byte (tp,0xcfff ); ocp_data &= ~BIT (0 ); -ocp_write_byte (tp,MCU_TYPE_USB ,0xcfff , ocp_data); +usb_ocp_write_byte (tp,0xcfff , ocp_data); - ocp_data =ocp_read_word (tp,MCU_TYPE_USB ,USB_MISC_0 ); + ocp_data =usb_ocp_read_word (tp,USB_MISC_0 ); ocp_data &= ~PCUT_STATUS ; -ocp_write_word (tp,MCU_TYPE_USB ,USB_MISC_0 , ocp_data); +usb_ocp_write_word (tp,USB_MISC_0 , ocp_data); data =r8153_phy_status (tp,0 );
@@ -3266,52 +3278,52 @@ static void r8153_power_cut_en(struct r8152 *tp, bool enable) {u32 ocp_data; - ocp_data =ocp_read_word (tp,MCU_TYPE_USB ,USB_POWER_CUT ); + ocp_data =usb_ocp_read_word (tp,USB_POWER_CUT );if (enable) ocp_data |=PWR_EN |PHASE2_EN ;else ocp_data &= ~(PWR_EN |PHASE2_EN ); -ocp_write_word (tp,MCU_TYPE_USB ,USB_POWER_CUT , ocp_data); +usb_ocp_write_word (tp,USB_POWER_CUT , ocp_data); - ocp_data =ocp_read_word (tp,MCU_TYPE_USB ,USB_MISC_0 ); + ocp_data =usb_ocp_read_word (tp,USB_MISC_0 ); ocp_data &= ~PCUT_STATUS ; -ocp_write_word (tp,MCU_TYPE_USB ,USB_MISC_0 , ocp_data); +usb_ocp_write_word (tp,USB_MISC_0 , ocp_data); }static void r8153b_power_cut_en (struct r8152 *tp,bool enable) {u32 ocp_data; - ocp_data =ocp_read_word (tp,MCU_TYPE_USB ,USB_POWER_CUT ); + ocp_data =usb_ocp_read_word (tp,USB_POWER_CUT );if (enable) ocp_data |=PWR_EN |PHASE2_EN ;else ocp_data &= ~PWR_EN ; -ocp_write_word (tp,MCU_TYPE_USB ,USB_POWER_CUT , ocp_data); +usb_ocp_write_word (tp,USB_POWER_CUT , ocp_data); - ocp_data =ocp_read_word (tp,MCU_TYPE_USB ,USB_MISC_0 ); + ocp_data =usb_ocp_read_word (tp,USB_MISC_0 ); ocp_data &= ~PCUT_STATUS ; -ocp_write_word (tp,MCU_TYPE_USB ,USB_MISC_0 , ocp_data); +usb_ocp_write_word (tp,USB_MISC_0 , ocp_data); }static void r8153_queue_wake (struct r8152 *tp,bool enable) {u32 ocp_data; - ocp_data =ocp_read_byte (tp,MCU_TYPE_PLA ,PLA_INDICATE_FALG ); + ocp_data =pla_ocp_read_byte (tp,PLA_INDICATE_FALG );if (enable) ocp_data |=UPCOMING_RUNTIME_D3 ;else ocp_data &= ~UPCOMING_RUNTIME_D3 ; -ocp_write_byte (tp,MCU_TYPE_PLA ,PLA_INDICATE_FALG , ocp_data); +pla_ocp_write_byte (tp,PLA_INDICATE_FALG , ocp_data); - ocp_data =ocp_read_byte (tp,MCU_TYPE_PLA ,PLA_SUSPEND_FLAG ); + ocp_data =pla_ocp_read_byte (tp,PLA_SUSPEND_FLAG ); ocp_data &= ~LINK_CHG_EVENT ; -ocp_write_byte (tp,MCU_TYPE_PLA ,PLA_SUSPEND_FLAG , ocp_data); +pla_ocp_write_byte (tp,PLA_SUSPEND_FLAG , ocp_data); - ocp_data =ocp_read_word (tp,MCU_TYPE_PLA ,PLA_EXTRA_STATUS ); + ocp_data =pla_ocp_read_word (tp,PLA_EXTRA_STATUS ); ocp_data &= ~LINK_CHANGE_FLAG ; -ocp_write_word (tp,MCU_TYPE_PLA ,PLA_EXTRA_STATUS , ocp_data); +pla_ocp_write_word (tp,PLA_EXTRA_STATUS , ocp_data); }static bool rtl_can_wakeup (struct r8152 *tp)
@@ -3328,25 +3340,25 @@ static void rtl_runtime_suspend_enable(struct r8152 *tp, bool enable)__rtl_set_wol (tp,WAKE_ANY ); -ocp_write_byte (tp,MCU_TYPE_PLA ,PLA_CRWECR ,CRWECR_CONFIG ); +pla_ocp_write_byte (tp,PLA_CRWECR ,CRWECR_CONFIG ); - ocp_data =ocp_read_word (tp,MCU_TYPE_PLA ,PLA_CONFIG34 ); + ocp_data =pla_ocp_read_word (tp,PLA_CONFIG34 ); ocp_data |=LINK_OFF_WAKE_EN ; -ocp_write_word (tp,MCU_TYPE_PLA ,PLA_CONFIG34 , ocp_data); +pla_ocp_write_word (tp,PLA_CONFIG34 , ocp_data); -ocp_write_byte (tp,MCU_TYPE_PLA ,PLA_CRWECR ,CRWECR_NORAML ); +pla_ocp_write_byte (tp,PLA_CRWECR ,CRWECR_NORAML ); }else {u32 ocp_data;__rtl_set_wol (tp, tp->saved_wolopts); -ocp_write_byte (tp,MCU_TYPE_PLA ,PLA_CRWECR ,CRWECR_CONFIG ); +pla_ocp_write_byte (tp,PLA_CRWECR ,CRWECR_CONFIG ); - ocp_data =ocp_read_word (tp,MCU_TYPE_PLA ,PLA_CONFIG34 ); + ocp_data =pla_ocp_read_word (tp,PLA_CONFIG34 ); ocp_data &= ~LINK_OFF_WAKE_EN ; -ocp_write_word (tp,MCU_TYPE_PLA ,PLA_CONFIG34 , ocp_data); +pla_ocp_write_word (tp,PLA_CONFIG34 , ocp_data); -ocp_write_byte (tp,MCU_TYPE_PLA ,PLA_CRWECR ,CRWECR_NORAML ); +pla_ocp_write_byte (tp,PLA_CRWECR ,CRWECR_NORAML ); } }
@@ -3405,10 +3417,10 @@ static void r8153_teredo_off(struct r8152 *tp)case RTL_VER_05 :case RTL_VER_06 :case RTL_VER_07 : - ocp_data =ocp_read_word (tp,MCU_TYPE_PLA ,PLA_TEREDO_CFG ); + ocp_data =pla_ocp_read_word (tp,PLA_TEREDO_CFG ); ocp_data &= ~(TEREDO_SEL |TEREDO_RS_EVENT_MASK |OOB_TEREDO_EN ); -ocp_write_word (tp,MCU_TYPE_PLA ,PLA_TEREDO_CFG , ocp_data); +pla_ocp_write_word (tp,PLA_TEREDO_CFG , ocp_data);break ;case RTL_VER_08 :
@@ -3416,27 +3428,27 @@ static void r8153_teredo_off(struct r8152 *tp)/* The bit 0 ~ 7 are relative with teredo settings. They are * W1C (write 1 to clear), so set all 1 to disable it. */ -ocp_write_byte (tp,MCU_TYPE_PLA ,PLA_TEREDO_CFG ,0xff ); +pla_ocp_write_byte (tp,PLA_TEREDO_CFG ,0xff );break ;default :break ; } -ocp_write_word (tp,MCU_TYPE_PLA ,PLA_WDT6_CTRL ,WDT6_SET_MODE ); -ocp_write_word (tp,MCU_TYPE_PLA ,PLA_REALWOW_TIMER ,0 ); -ocp_write_dword (tp,MCU_TYPE_PLA ,PLA_TEREDO_TIMER ,0 ); +pla_ocp_write_word (tp,PLA_WDT6_CTRL ,WDT6_SET_MODE ); +pla_ocp_write_word (tp,PLA_REALWOW_TIMER ,0 ); +pla_ocp_write_dword (tp,PLA_TEREDO_TIMER ,0 ); }static void rtl_reset_bmu (struct r8152 *tp) {u32 ocp_data; - ocp_data =ocp_read_byte (tp,MCU_TYPE_USB ,USB_BMU_RESET ); + ocp_data =usb_ocp_read_byte (tp,USB_BMU_RESET ); ocp_data &= ~(BMU_RESET_EP_IN |BMU_RESET_EP_OUT ); -ocp_write_byte (tp,MCU_TYPE_USB ,USB_BMU_RESET , ocp_data); +usb_ocp_write_byte (tp,USB_BMU_RESET , ocp_data); ocp_data |=BMU_RESET_EP_IN |BMU_RESET_EP_OUT ; -ocp_write_byte (tp,MCU_TYPE_USB ,USB_BMU_RESET , ocp_data); +usb_ocp_write_byte (tp,USB_BMU_RESET , ocp_data); }/* Clear the bp to stop the firmware before loading a new one */
@@ -3457,18 +3469,18 @@ static void rtl_clear_bp(struct r8152 *tp, u16 type)case RTL_VER_09 :default :if (type ==MCU_TYPE_USB ) { -ocp_write_byte (tp,MCU_TYPE_USB ,USB_BP2_EN ,0 ); - -ocp_write_word (tp,MCU_TYPE_USB ,USB_BP_8 ,0 ); -ocp_write_word (tp,MCU_TYPE_USB ,USB_BP_9 ,0 ); -ocp_write_word (tp,MCU_TYPE_USB ,USB_BP_10 ,0 ); -ocp_write_word (tp,MCU_TYPE_USB ,USB_BP_11 ,0 ); -ocp_write_word (tp,MCU_TYPE_USB ,USB_BP_12 ,0 ); -ocp_write_word (tp,MCU_TYPE_USB ,USB_BP_13 ,0 ); -ocp_write_word (tp,MCU_TYPE_USB ,USB_BP_14 ,0 ); -ocp_write_word (tp,MCU_TYPE_USB ,USB_BP_15 ,0 ); +usb_ocp_write_byte (tp,USB_BP2_EN ,0 ); + +usb_ocp_write_word (tp,USB_BP_8 ,0 ); +usb_ocp_write_word (tp,USB_BP_9 ,0 ); +usb_ocp_write_word (tp,USB_BP_10 ,0 ); +usb_ocp_write_word (tp,USB_BP_11 ,0 ); +usb_ocp_write_word (tp,USB_BP_12 ,0 ); +usb_ocp_write_word (tp,USB_BP_13 ,0 ); +usb_ocp_write_word (tp,USB_BP_14 ,0 ); +usb_ocp_write_word (tp,USB_BP_15 ,0 ); }else { -ocp_write_byte (tp,MCU_TYPE_PLA ,PLA_BP_EN ,0 ); +pla_ocp_write_byte (tp,PLA_BP_EN ,0 ); }break ; }
@@ -3541,7 +3553,7 @@ static int r8153_post_ram_code(struct r8152 *tp, u16 key_addr)r8153_patch_request (tp, false); -ocp_write_word (tp,MCU_TYPE_PLA ,PLA_OCP_GPHY_BASE , tp->ocp_base); +pla_ocp_write_word (tp,PLA_OCP_GPHY_BASE , tp->ocp_base);return 0 ; }
@@ -3987,9 +3999,9 @@ static void rtl8152_fw_mac_apply(struct r8152 *tp, struct fw_mac *mac)* break points and before applying the PLA firmware. */ if (tp->version ==RTL_VER_04 && type ==MCU_TYPE_PLA && - !(ocp_read_word (tp,MCU_TYPE_PLA ,PLA_MACDBG_POST ) &DEBUG_OE )) { -ocp_write_word (tp,MCU_TYPE_PLA ,PLA_MACDBG_PRE ,DEBUG_LTSSM ); -ocp_write_word (tp,MCU_TYPE_PLA ,PLA_MACDBG_POST ,DEBUG_LTSSM ); + !(pla_ocp_read_word (tp,PLA_MACDBG_POST ) &DEBUG_OE )) { +pla_ocp_write_word (tp,PLA_MACDBG_PRE ,DEBUG_LTSSM ); +pla_ocp_write_word (tp,PLA_MACDBG_POST ,DEBUG_LTSSM ); } length =__le32_to_cpu (mac->blk_hdr.length);
@@ -4018,8 +4030,7 @@ static void rtl8152_fw_mac_apply(struct r8152 *tp, struct fw_mac *mac) fw_ver_reg =__le16_to_cpu (mac->fw_ver_reg);if (fw_ver_reg) -ocp_write_byte (tp,MCU_TYPE_USB , fw_ver_reg, - mac->fw_ver_data); +usb_ocp_write_byte (tp, fw_ver_reg, mac->fw_ver_data);dev_dbg (&tp->intf->dev,"successfully applied %s\n" , mac->info); }
@@ -4163,7 +4174,7 @@ static void r8152_eee_en(struct r8152 *tp, bool enable)u16 config1, config2, config3;u32 ocp_data; - ocp_data =ocp_read_word (tp,MCU_TYPE_PLA ,PLA_EEE_CR ); + ocp_data =pla_ocp_read_word (tp,PLA_EEE_CR ); config1 =ocp_reg_read (tp,OCP_EEE_CONFIG1 ) & ~sd_rise_time_mask; config2 =ocp_reg_read (tp,OCP_EEE_CONFIG2 ); config3 =ocp_reg_read (tp,OCP_EEE_CONFIG3 ) & ~fast_snr_mask;
@@ -4183,7 +4194,7 @@ static void r8152_eee_en(struct r8152 *tp, bool enable) config3 |=fast_snr (511 ); } -ocp_write_word (tp,MCU_TYPE_PLA ,PLA_EEE_CR , ocp_data); +pla_ocp_write_word (tp,PLA_EEE_CR , ocp_data);ocp_reg_write (tp,OCP_EEE_CONFIG1 , config1);ocp_reg_write (tp,OCP_EEE_CONFIG2 , config2);ocp_reg_write (tp,OCP_EEE_CONFIG3 , config3);
@@ -4194,7 +4205,7 @@ static void r8153_eee_en(struct r8152 *tp, bool enable)u32 ocp_data;u16 config; - ocp_data =ocp_read_word (tp,MCU_TYPE_PLA ,PLA_EEE_CR ); + ocp_data =pla_ocp_read_word (tp,PLA_EEE_CR ); config =ocp_reg_read (tp,OCP_EEE_CFG );if (enable) {
@@ -4205,7 +4216,7 @@ static void r8153_eee_en(struct r8152 *tp, bool enable) config &= ~EEE10_EN ; } -ocp_write_word (tp,MCU_TYPE_PLA ,PLA_EEE_CR , ocp_data); +pla_ocp_write_word (tp,PLA_EEE_CR , ocp_data);ocp_reg_write (tp,OCP_EEE_CFG , config); tp->ups_info.eee = enable;
@@ -4279,7 +4290,7 @@ static void wait_oob_link_list_ready(struct r8152 *tp)int i;for (i =0 ; i <1000 ; i++) { - ocp_data =ocp_read_byte (tp,MCU_TYPE_PLA ,PLA_OOB_CTRL ); + ocp_data =pla_ocp_read_byte (tp,PLA_OOB_CTRL );if (ocp_data &LINK_LIST_READY )break ;usleep_range (1000 ,2000 );
@@ -4290,107 +4301,103 @@ static void r8152b_exit_oob(struct r8152 *tp) {u32 ocp_data; - ocp_data =ocp_read_dword (tp,MCU_TYPE_PLA ,PLA_RCR ); + ocp_data =pla_ocp_read_dword (tp,PLA_RCR ); ocp_data &= ~RCR_ACPT_ALL ; -ocp_write_dword (tp,MCU_TYPE_PLA ,PLA_RCR , ocp_data); +pla_ocp_write_dword (tp,PLA_RCR , ocp_data);rxdy_gated_en (tp, true);r8153_teredo_off (tp); -ocp_write_byte (tp,MCU_TYPE_PLA ,PLA_CRWECR ,CRWECR_NORAML ); -ocp_write_byte (tp,MCU_TYPE_PLA ,PLA_CR ,0x00 ); +pla_ocp_write_byte (tp,PLA_CRWECR ,CRWECR_NORAML ); +pla_ocp_write_byte (tp,PLA_CR ,0x00 ); - ocp_data =ocp_read_byte (tp,MCU_TYPE_PLA ,PLA_OOB_CTRL ); + ocp_data =pla_ocp_read_byte (tp,PLA_OOB_CTRL ); ocp_data &= ~NOW_IS_OOB ; -ocp_write_byte (tp,MCU_TYPE_PLA ,PLA_OOB_CTRL , ocp_data); +pla_ocp_write_byte (tp,PLA_OOB_CTRL , ocp_data); - ocp_data =ocp_read_word (tp,MCU_TYPE_PLA ,PLA_SFF_STS_7 ); + ocp_data =pla_ocp_read_word (tp,PLA_SFF_STS_7 ); ocp_data &= ~MCU_BORW_EN ; -ocp_write_word (tp,MCU_TYPE_PLA ,PLA_SFF_STS_7 , ocp_data); +pla_ocp_write_word (tp,PLA_SFF_STS_7 , ocp_data);wait_oob_link_list_ready (tp); - ocp_data =ocp_read_word (tp,MCU_TYPE_PLA ,PLA_SFF_STS_7 ); + ocp_data =pla_ocp_read_word (tp,PLA_SFF_STS_7 ); ocp_data |=RE_INIT_LL ; -ocp_write_word (tp,MCU_TYPE_PLA ,PLA_SFF_STS_7 , ocp_data); +pla_ocp_write_word (tp,PLA_SFF_STS_7 , ocp_data);wait_oob_link_list_ready (tp);rtl8152_nic_reset (tp);/* rx share fifo credit full threshold */ -ocp_write_dword (tp,MCU_TYPE_PLA ,PLA_RXFIFO_CTRL0 ,RXFIFO_THR1_NORMAL ); +pla_ocp_write_dword (tp,PLA_RXFIFO_CTRL0 ,RXFIFO_THR1_NORMAL );if (tp->udev->speed ==USB_SPEED_FULL || tp->udev->speed ==USB_SPEED_LOW ) {/* rx share fifo credit near full threshold */ -ocp_write_dword (tp,MCU_TYPE_PLA ,PLA_RXFIFO_CTRL1 , -RXFIFO_THR2_FULL ); -ocp_write_dword (tp,MCU_TYPE_PLA ,PLA_RXFIFO_CTRL2 , -RXFIFO_THR3_FULL ); +pla_ocp_write_dword (tp,PLA_RXFIFO_CTRL1 ,RXFIFO_THR2_FULL ); +pla_ocp_write_dword (tp,PLA_RXFIFO_CTRL2 ,RXFIFO_THR3_FULL ); }else {/* rx share fifo credit near full threshold */ -ocp_write_dword (tp,MCU_TYPE_PLA ,PLA_RXFIFO_CTRL1 , -RXFIFO_THR2_HIGH ); -ocp_write_dword (tp,MCU_TYPE_PLA ,PLA_RXFIFO_CTRL2 , -RXFIFO_THR3_HIGH ); +pla_ocp_write_dword (tp,PLA_RXFIFO_CTRL1 ,RXFIFO_THR2_HIGH ); +pla_ocp_write_dword (tp,PLA_RXFIFO_CTRL2 ,RXFIFO_THR3_HIGH ); }/* TX share fifo free credit full threshold */ -ocp_write_dword (tp,MCU_TYPE_PLA ,PLA_TXFIFO_CTRL ,TXFIFO_THR_NORMAL ); +pla_ocp_write_dword (tp,PLA_TXFIFO_CTRL ,TXFIFO_THR_NORMAL ); -ocp_write_byte (tp,MCU_TYPE_USB ,USB_TX_AGG ,TX_AGG_MAX_THRESHOLD ); -ocp_write_dword (tp,MCU_TYPE_USB ,USB_RX_BUF_TH ,RX_THR_HIGH ); -ocp_write_dword (tp,MCU_TYPE_USB ,USB_TX_DMA , -TEST_MODE_DISABLE |TX_SIZE_ADJUST1 ); +usb_ocp_write_byte (tp,USB_TX_AGG ,TX_AGG_MAX_THRESHOLD ); +usb_ocp_write_dword (tp,USB_RX_BUF_TH ,RX_THR_HIGH ); +usb_ocp_write_dword (tp,USB_TX_DMA , +TEST_MODE_DISABLE |TX_SIZE_ADJUST1 );rtl_rx_vlan_en (tp, tp->netdev->features &NETIF_F_HW_VLAN_CTAG_RX ); -ocp_write_word (tp,MCU_TYPE_PLA ,PLA_RMS ,RTL8152_RMS ); +pla_ocp_write_word (tp,PLA_RMS ,RTL8152_RMS ); - ocp_data =ocp_read_word (tp,MCU_TYPE_PLA ,PLA_TCR0 ); + ocp_data =pla_ocp_read_word (tp,PLA_TCR0 ); ocp_data |=TCR0_AUTO_FIFO ; -ocp_write_word (tp,MCU_TYPE_PLA ,PLA_TCR0 , ocp_data); +pla_ocp_write_word (tp,PLA_TCR0 , ocp_data); }static void r8152b_enter_oob (struct r8152 *tp) {u32 ocp_data; - ocp_data =ocp_read_byte (tp,MCU_TYPE_PLA ,PLA_OOB_CTRL ); + ocp_data =pla_ocp_read_byte (tp,PLA_OOB_CTRL ); ocp_data &= ~NOW_IS_OOB ; -ocp_write_byte (tp,MCU_TYPE_PLA ,PLA_OOB_CTRL , ocp_data); +pla_ocp_write_byte (tp,PLA_OOB_CTRL , ocp_data); -ocp_write_dword (tp,MCU_TYPE_PLA ,PLA_RXFIFO_CTRL0 ,RXFIFO_THR1_OOB ); -ocp_write_dword (tp,MCU_TYPE_PLA ,PLA_RXFIFO_CTRL1 ,RXFIFO_THR2_OOB ); -ocp_write_dword (tp,MCU_TYPE_PLA ,PLA_RXFIFO_CTRL2 ,RXFIFO_THR3_OOB ); +pla_ocp_write_dword (tp,PLA_RXFIFO_CTRL0 ,RXFIFO_THR1_OOB ); +pla_ocp_write_dword (tp,PLA_RXFIFO_CTRL1 ,RXFIFO_THR2_OOB ); +pla_ocp_write_dword (tp,PLA_RXFIFO_CTRL2 ,RXFIFO_THR3_OOB );rtl_disable (tp);wait_oob_link_list_ready (tp); - ocp_data =ocp_read_word (tp,MCU_TYPE_PLA ,PLA_SFF_STS_7 ); + ocp_data =pla_ocp_read_word (tp,PLA_SFF_STS_7 ); ocp_data |=RE_INIT_LL ; -ocp_write_word (tp,MCU_TYPE_PLA ,PLA_SFF_STS_7 , ocp_data); +pla_ocp_write_word (tp,PLA_SFF_STS_7 , ocp_data);wait_oob_link_list_ready (tp); -ocp_write_word (tp,MCU_TYPE_PLA ,PLA_RMS ,RTL8152_RMS ); +pla_ocp_write_word (tp,PLA_RMS ,RTL8152_RMS );rtl_rx_vlan_en (tp, true); - ocp_data =ocp_read_word (tp,MCU_TYPE_PLA ,PLA_BDC_CR ); + ocp_data =pla_ocp_read_word (tp,PLA_BDC_CR ); ocp_data |=ALDPS_PROXY_MODE ; -ocp_write_word (tp,MCU_TYPE_PLA ,PLA_BDC_CR , ocp_data); +pla_ocp_write_word (tp,PLA_BDC_CR , ocp_data); - ocp_data =ocp_read_byte (tp,MCU_TYPE_PLA ,PLA_OOB_CTRL ); + ocp_data =pla_ocp_read_byte (tp,PLA_OOB_CTRL ); ocp_data |=NOW_IS_OOB |DIS_MCU_CLROOB ; -ocp_write_byte (tp,MCU_TYPE_PLA ,PLA_OOB_CTRL , ocp_data); +pla_ocp_write_byte (tp,PLA_OOB_CTRL , ocp_data);rxdy_gated_en (tp, false); - ocp_data =ocp_read_dword (tp,MCU_TYPE_PLA ,PLA_RCR ); + ocp_data =pla_ocp_read_dword (tp,PLA_RCR ); ocp_data |=RCR_APM |RCR_AM |RCR_AB ; -ocp_write_dword (tp,MCU_TYPE_PLA ,PLA_RCR , ocp_data); +pla_ocp_write_dword (tp,PLA_RCR , ocp_data); }static int r8153_pre_firmware_1 (struct r8152 *tp)
@@ -4399,7 +4406,7 @@ static int r8153_pre_firmware_1(struct r8152 *tp)/* Wait till the WTD timer is ready. It would take at most 104 ms. */ for (i =0 ; i <104 ; i++) { -u32 ocp_data =ocp_read_byte (tp,MCU_TYPE_USB ,USB_WDT1_CTRL ); +u32 ocp_data =usb_ocp_read_byte (tp,USB_WDT1_CTRL );if (!(ocp_data &WTD1_EN ))break ;
@@ -4412,11 +4419,11 @@ static int r8153_pre_firmware_1(struct r8152 *tp)static int r8153_post_firmware_1 (struct r8152 *tp) {/* set USB_BP_4 to support USB_SPEED_SUPER only */ -if (ocp_read_byte (tp,MCU_TYPE_USB ,USB_CSTMR ) &FORCE_SUPER ) -ocp_write_word (tp,MCU_TYPE_USB ,USB_BP_4 ,BP4_SUPER_ONLY ); +if (usb_ocp_read_byte (tp,USB_CSTMR ) &FORCE_SUPER ) +usb_ocp_write_word (tp,USB_BP_4 ,BP4_SUPER_ONLY );/* reset UPHY timer to 36 ms */ -ocp_write_word (tp,MCU_TYPE_PLA ,PLA_UPHY_TIMER ,36000 /16 ); +pla_ocp_write_word (tp,PLA_UPHY_TIMER ,36000 /16 );return 0 ; }
@@ -4427,9 +4434,9 @@ static int r8153_pre_firmware_2(struct r8152 *tp)r8153_pre_firmware_1 (tp); - ocp_data =ocp_read_word (tp,MCU_TYPE_USB ,USB_FW_FIX_EN0 ); + ocp_data =usb_ocp_read_word (tp,USB_FW_FIX_EN0 ); ocp_data &= ~FW_FIX_SUSPEND ; -ocp_write_word (tp,MCU_TYPE_USB ,USB_FW_FIX_EN0 , ocp_data); +usb_ocp_write_word (tp,USB_FW_FIX_EN0 , ocp_data);return 0 ; }
@@ -4439,25 +4446,25 @@ static int r8153_post_firmware_2(struct r8152 *tp)u32 ocp_data;/* enable bp0 if support USB_SPEED_SUPER only */ -if (ocp_read_byte (tp,MCU_TYPE_USB ,USB_CSTMR ) &FORCE_SUPER ) { - ocp_data =ocp_read_word (tp,MCU_TYPE_PLA ,PLA_BP_EN ); +if (usb_ocp_read_byte (tp,USB_CSTMR ) &FORCE_SUPER ) { + ocp_data =pla_ocp_read_word (tp,PLA_BP_EN ); ocp_data |=BIT (0 ); -ocp_write_word (tp,MCU_TYPE_PLA ,PLA_BP_EN , ocp_data); +pla_ocp_write_word (tp,PLA_BP_EN , ocp_data); }/* reset UPHY timer to 36 ms */ -ocp_write_word (tp,MCU_TYPE_PLA ,PLA_UPHY_TIMER ,36000 /16 ); +pla_ocp_write_word (tp,PLA_UPHY_TIMER ,36000 /16 );/* enable U3P3 check, set the counter to 4 */ -ocp_write_word (tp,MCU_TYPE_PLA ,PLA_EXTRA_STATUS ,U3P3_CHECK_EN |4 ); +pla_ocp_write_word (tp,PLA_EXTRA_STATUS ,U3P3_CHECK_EN |4 ); - ocp_data =ocp_read_word (tp,MCU_TYPE_USB ,USB_FW_FIX_EN0 ); + ocp_data =usb_ocp_read_word (tp,USB_FW_FIX_EN0 ); ocp_data |=FW_FIX_SUSPEND ; -ocp_write_word (tp,MCU_TYPE_USB ,USB_FW_FIX_EN0 , ocp_data); +usb_ocp_write_word (tp,USB_FW_FIX_EN0 , ocp_data); - ocp_data =ocp_read_byte (tp,MCU_TYPE_USB ,USB_USB2PHY ); + ocp_data =usb_ocp_read_byte (tp,USB_USB2PHY ); ocp_data |=USB2PHY_L1 |USB2PHY_SUSPEND ; -ocp_write_byte (tp,MCU_TYPE_USB ,USB_USB2PHY , ocp_data); +usb_ocp_write_byte (tp,USB_USB2PHY , ocp_data);return 0 ; }
@@ -4466,13 +4473,13 @@ static int r8153_post_firmware_3(struct r8152 *tp) {u32 ocp_data; - ocp_data =ocp_read_byte (tp,MCU_TYPE_USB ,USB_USB2PHY ); + ocp_data =usb_ocp_read_byte (tp,USB_USB2PHY ); ocp_data |=USB2PHY_L1 |USB2PHY_SUSPEND ; -ocp_write_byte (tp,MCU_TYPE_USB ,USB_USB2PHY , ocp_data); +usb_ocp_write_byte (tp,USB_USB2PHY , ocp_data); - ocp_data =ocp_read_word (tp,MCU_TYPE_USB ,USB_FW_FIX_EN1 ); + ocp_data =usb_ocp_read_word (tp,USB_FW_FIX_EN1 ); ocp_data |=FW_IP_RESET_EN ; -ocp_write_word (tp,MCU_TYPE_USB ,USB_FW_FIX_EN1 , ocp_data); +usb_ocp_write_word (tp,USB_FW_FIX_EN1 , ocp_data);return 0 ; }
@@ -4480,8 +4487,7 @@ static int r8153_post_firmware_3(struct r8152 *tp)static int r8153b_pre_firmware_1 (struct r8152 *tp) {/* enable fc timer and set timer to 1 second. */ -ocp_write_word (tp,MCU_TYPE_USB ,USB_FC_TIMER , -CTRL_TIMER_EN | (1000 /8 )); +usb_ocp_write_word (tp,USB_FC_TIMER ,CTRL_TIMER_EN | (1000 /8 ));return 0 ; }
@@ -4491,24 +4497,24 @@ static int r8153b_post_firmware_1(struct r8152 *tp)u32 ocp_data;/* enable bp0 for RTL8153-BND */ - ocp_data =ocp_read_byte (tp,MCU_TYPE_USB ,USB_MISC_1 ); + ocp_data =usb_ocp_read_byte (tp,USB_MISC_1 );if (ocp_data &BND_MASK ) { - ocp_data =ocp_read_word (tp,MCU_TYPE_PLA ,PLA_BP_EN ); + ocp_data =pla_ocp_read_word (tp,PLA_BP_EN ); ocp_data |=BIT (0 ); -ocp_write_word (tp,MCU_TYPE_PLA ,PLA_BP_EN , ocp_data); +pla_ocp_write_word (tp,PLA_BP_EN , ocp_data); } - ocp_data =ocp_read_word (tp,MCU_TYPE_USB ,USB_FW_CTRL ); + ocp_data =usb_ocp_read_word (tp,USB_FW_CTRL ); ocp_data |=FLOW_CTRL_PATCH_OPT ; -ocp_write_word (tp,MCU_TYPE_USB ,USB_FW_CTRL , ocp_data); +usb_ocp_write_word (tp,USB_FW_CTRL , ocp_data); - ocp_data =ocp_read_word (tp,MCU_TYPE_USB ,USB_FW_TASK ); + ocp_data =usb_ocp_read_word (tp,USB_FW_TASK ); ocp_data |=FC_PATCH_TASK ; -ocp_write_word (tp,MCU_TYPE_USB ,USB_FW_TASK , ocp_data); +usb_ocp_write_word (tp,USB_FW_TASK , ocp_data); - ocp_data =ocp_read_word (tp,MCU_TYPE_USB ,USB_FW_FIX_EN1 ); + ocp_data =usb_ocp_read_word (tp,USB_FW_FIX_EN1 ); ocp_data |=FW_IP_RESET_EN ; -ocp_write_word (tp,MCU_TYPE_USB ,USB_FW_FIX_EN1 , ocp_data); +usb_ocp_write_word (tp,USB_FW_FIX_EN1 , ocp_data);return 0 ; }
@@ -4528,7 +4534,7 @@ static void r8153_aldps_en(struct r8152 *tp, bool enable)ocp_reg_write (tp,OCP_POWER_CFG , data);for (i =0 ; i <20 ; i++) {usleep_range (1000 ,2000 ); -if (ocp_read_word (tp,MCU_TYPE_PLA ,0xe000 ) &0x0100 ) +if (pla_ocp_read_word (tp,0xe000 ) &0x0100 )break ; } }
@@ -4567,9 +4573,9 @@ static void r8153_hw_phy_cfg(struct r8152 *tp)ocp_reg_write (tp,OCP_POWER_CFG , data);sram_write (tp,SRAM_IMPEDANCE ,0x0b13 ); - ocp_data =ocp_read_word (tp,MCU_TYPE_PLA ,PLA_PHY_PWR ); + ocp_data =pla_ocp_read_word (tp,PLA_PHY_PWR ); ocp_data |=PFM_PWM_SWITCH ; -ocp_write_word (tp,MCU_TYPE_PLA ,PLA_PHY_PWR , ocp_data); +pla_ocp_write_word (tp,PLA_PHY_PWR , ocp_data);/* Enable LPF corner auto tune */ sram_write (tp,SRAM_LPF_CFG ,0xf70f );
@@ -4602,10 +4608,10 @@ static u32 r8152_efuse_read(struct r8152 *tp, u8 addr) {u32 ocp_data; -ocp_write_word (tp,MCU_TYPE_PLA ,PLA_EFUSE_CMD ,EFUSE_READ_CMD | addr); - ocp_data =ocp_read_word (tp,MCU_TYPE_PLA ,PLA_EFUSE_CMD ); +pla_ocp_write_word (tp,PLA_EFUSE_CMD ,EFUSE_READ_CMD | addr); + ocp_data =pla_ocp_read_word (tp,PLA_EFUSE_CMD ); ocp_data = (ocp_data &EFUSE_DATA_BIT16 ) <<9 ;/* data of bit16 */ - ocp_data |=ocp_read_word (tp,MCU_TYPE_PLA ,PLA_EFUSE_DATA ); + ocp_data |=pla_ocp_read_word (tp,PLA_EFUSE_DATA );return ocp_data; }
@@ -4652,14 +4658,14 @@ static void r8153b_hw_phy_cfg(struct r8152 *tp)u32 swr_cnt_1ms_ini; swr_cnt_1ms_ini = (16000000 / ocp_data) &SAW_CNT_1MS_MASK ; - ocp_data =ocp_read_word (tp,MCU_TYPE_USB ,USB_UPS_CFG ); + ocp_data =usb_ocp_read_word (tp,USB_UPS_CFG ); ocp_data = (ocp_data & ~SAW_CNT_1MS_MASK ) | swr_cnt_1ms_ini; -ocp_write_word (tp,MCU_TYPE_USB ,USB_UPS_CFG , ocp_data); +usb_ocp_write_word (tp,USB_UPS_CFG , ocp_data); } - ocp_data =ocp_read_word (tp,MCU_TYPE_PLA ,PLA_PHY_PWR ); + ocp_data =pla_ocp_read_word (tp,PLA_PHY_PWR ); ocp_data |=PFM_PWM_SWITCH ; -ocp_write_word (tp,MCU_TYPE_PLA ,PLA_PHY_PWR , ocp_data); +pla_ocp_write_word (tp,PLA_PHY_PWR , ocp_data);/* Advnace EEE */ if (!r8153_patch_request (tp, true)) {
@@ -4699,47 +4705,47 @@ static void r8153_first_init(struct r8152 *tp)rxdy_gated_en (tp, true);r8153_teredo_off (tp); - ocp_data =ocp_read_dword (tp,MCU_TYPE_PLA ,PLA_RCR ); + ocp_data =pla_ocp_read_dword (tp,PLA_RCR ); ocp_data &= ~RCR_ACPT_ALL ; -ocp_write_dword (tp,MCU_TYPE_PLA ,PLA_RCR , ocp_data); +pla_ocp_write_dword (tp,PLA_RCR , ocp_data);rtl8152_nic_reset (tp);rtl_reset_bmu (tp); - ocp_data =ocp_read_byte (tp,MCU_TYPE_PLA ,PLA_OOB_CTRL ); + ocp_data =pla_ocp_read_byte (tp,PLA_OOB_CTRL ); ocp_data &= ~NOW_IS_OOB ; -ocp_write_byte (tp,MCU_TYPE_PLA ,PLA_OOB_CTRL , ocp_data); +pla_ocp_write_byte (tp,PLA_OOB_CTRL , ocp_data); - ocp_data =ocp_read_word (tp,MCU_TYPE_PLA ,PLA_SFF_STS_7 ); + ocp_data =pla_ocp_read_word (tp,PLA_SFF_STS_7 ); ocp_data &= ~MCU_BORW_EN ; -ocp_write_word (tp,MCU_TYPE_PLA ,PLA_SFF_STS_7 , ocp_data); +pla_ocp_write_word (tp,PLA_SFF_STS_7 , ocp_data);wait_oob_link_list_ready (tp); - ocp_data =ocp_read_word (tp,MCU_TYPE_PLA ,PLA_SFF_STS_7 ); + ocp_data =pla_ocp_read_word (tp,PLA_SFF_STS_7 ); ocp_data |=RE_INIT_LL ; -ocp_write_word (tp,MCU_TYPE_PLA ,PLA_SFF_STS_7 , ocp_data); +pla_ocp_write_word (tp,PLA_SFF_STS_7 , ocp_data);wait_oob_link_list_ready (tp);rtl_rx_vlan_en (tp, tp->netdev->features &NETIF_F_HW_VLAN_CTAG_RX ); ocp_data = tp->netdev->mtu +VLAN_ETH_HLEN +ETH_FCS_LEN ; -ocp_write_word (tp,MCU_TYPE_PLA ,PLA_RMS , ocp_data); -ocp_write_byte (tp,MCU_TYPE_PLA ,PLA_MTPS ,MTPS_JUMBO ); +pla_ocp_write_word (tp,PLA_RMS , ocp_data); +pla_ocp_write_byte (tp,PLA_MTPS ,MTPS_JUMBO ); - ocp_data =ocp_read_word (tp,MCU_TYPE_PLA ,PLA_TCR0 ); + ocp_data =pla_ocp_read_word (tp,PLA_TCR0 ); ocp_data |=TCR0_AUTO_FIFO ; -ocp_write_word (tp,MCU_TYPE_PLA ,PLA_TCR0 , ocp_data); +pla_ocp_write_word (tp,PLA_TCR0 , ocp_data);rtl8152_nic_reset (tp);/* rx share fifo credit full threshold */ -ocp_write_dword (tp,MCU_TYPE_PLA ,PLA_RXFIFO_CTRL0 ,RXFIFO_THR1_NORMAL ); -ocp_write_word (tp,MCU_TYPE_PLA ,PLA_RXFIFO_CTRL1 ,RXFIFO_THR2_NORMAL ); -ocp_write_word (tp,MCU_TYPE_PLA ,PLA_RXFIFO_CTRL2 ,RXFIFO_THR3_NORMAL ); +pla_ocp_write_dword (tp,PLA_RXFIFO_CTRL0 ,RXFIFO_THR1_NORMAL ); +pla_ocp_write_word (tp,PLA_RXFIFO_CTRL1 ,RXFIFO_THR2_NORMAL ); +pla_ocp_write_word (tp,PLA_RXFIFO_CTRL2 ,RXFIFO_THR3_NORMAL );/* TX share fifo free credit full threshold */ -ocp_write_dword (tp,MCU_TYPE_PLA ,PLA_TXFIFO_CTRL ,TXFIFO_THR_NORMAL2 ); +pla_ocp_write_dword (tp,PLA_TXFIFO_CTRL ,TXFIFO_THR_NORMAL2 ); }static void r8153_enter_oob (struct r8152 *tp)
@@ -4748,32 +4754,32 @@ static void r8153_enter_oob(struct r8152 *tp)r8153_mac_clk_spd (tp, true); - ocp_data =ocp_read_byte (tp,MCU_TYPE_PLA ,PLA_OOB_CTRL ); + ocp_data =pla_ocp_read_byte (tp,PLA_OOB_CTRL ); ocp_data &= ~NOW_IS_OOB ; -ocp_write_byte (tp,MCU_TYPE_PLA ,PLA_OOB_CTRL , ocp_data); +pla_ocp_write_byte (tp,PLA_OOB_CTRL , ocp_data);rtl_disable (tp);rtl_reset_bmu (tp);wait_oob_link_list_ready (tp); - ocp_data =ocp_read_word (tp,MCU_TYPE_PLA ,PLA_SFF_STS_7 ); + ocp_data =pla_ocp_read_word (tp,PLA_SFF_STS_7 ); ocp_data |=RE_INIT_LL ; -ocp_write_word (tp,MCU_TYPE_PLA ,PLA_SFF_STS_7 , ocp_data); +pla_ocp_write_word (tp,PLA_SFF_STS_7 , ocp_data);wait_oob_link_list_ready (tp); ocp_data = tp->netdev->mtu +VLAN_ETH_HLEN +ETH_FCS_LEN ; -ocp_write_word (tp,MCU_TYPE_PLA ,PLA_RMS , ocp_data); +pla_ocp_write_word (tp,PLA_RMS , ocp_data);switch (tp->version) {case RTL_VER_03 :case RTL_VER_04 :case RTL_VER_05 :case RTL_VER_06 : - ocp_data =ocp_read_word (tp,MCU_TYPE_PLA ,PLA_TEREDO_CFG ); + ocp_data =pla_ocp_read_word (tp,PLA_TEREDO_CFG ); ocp_data &= ~TEREDO_WAKE_MASK ; -ocp_write_word (tp,MCU_TYPE_PLA ,PLA_TEREDO_CFG , ocp_data); +pla_ocp_write_word (tp,PLA_TEREDO_CFG , ocp_data);break ;case RTL_VER_08 :
@@ -4782,7 +4788,7 @@ static void r8153_enter_oob(struct r8152 *tp)* type. Set it to zero. bits[7:0] are the W1C bits about * the events. Set them to all 1 to clear them. */ -ocp_write_word (tp,MCU_TYPE_PLA ,PLA_TEREDO_WAKE_BASE ,0x00ff ); +pla_ocp_write_word (tp,PLA_TEREDO_WAKE_BASE ,0x00ff );break ;default :
@@ -4791,19 +4797,19 @@ static void r8153_enter_oob(struct r8152 *tp)rtl_rx_vlan_en (tp, true); - ocp_data =ocp_read_word (tp,MCU_TYPE_PLA ,PLA_BDC_CR ); + ocp_data =pla_ocp_read_word (tp,PLA_BDC_CR ); ocp_data |=ALDPS_PROXY_MODE ; -ocp_write_word (tp,MCU_TYPE_PLA ,PLA_BDC_CR , ocp_data); +pla_ocp_write_word (tp,PLA_BDC_CR , ocp_data); - ocp_data =ocp_read_byte (tp,MCU_TYPE_PLA ,PLA_OOB_CTRL ); + ocp_data =pla_ocp_read_byte (tp,PLA_OOB_CTRL ); ocp_data |=NOW_IS_OOB |DIS_MCU_CLROOB ; -ocp_write_byte (tp,MCU_TYPE_PLA ,PLA_OOB_CTRL , ocp_data); +pla_ocp_write_byte (tp,PLA_OOB_CTRL , ocp_data);rxdy_gated_en (tp, false); - ocp_data =ocp_read_dword (tp,MCU_TYPE_PLA ,PLA_RCR ); + ocp_data =pla_ocp_read_dword (tp,PLA_RCR ); ocp_data |=RCR_APM |RCR_AM |RCR_AB ; -ocp_write_dword (tp,MCU_TYPE_PLA ,PLA_RCR , ocp_data); +pla_ocp_write_dword (tp,PLA_RCR , ocp_data); }static void rtl8153_disable (struct r8152 *tp)
@@ -4975,17 +4981,17 @@ static void rtl8153_up(struct r8152 *tp)r8153_aldps_en (tp, false);r8153_first_init (tp); - ocp_data =ocp_read_byte (tp,MCU_TYPE_PLA ,PLA_CONFIG6 ); + ocp_data =pla_ocp_read_byte (tp,PLA_CONFIG6 ); ocp_data |=LANWAKE_CLR_EN ; -ocp_write_byte (tp,MCU_TYPE_PLA ,PLA_CONFIG6 , ocp_data); +pla_ocp_write_byte (tp,PLA_CONFIG6 , ocp_data); - ocp_data =ocp_read_byte (tp,MCU_TYPE_PLA ,PLA_LWAKE_CTRL_REG ); + ocp_data =pla_ocp_read_byte (tp,PLA_LWAKE_CTRL_REG ); ocp_data &= ~LANWAKE_PIN ; -ocp_write_byte (tp,MCU_TYPE_PLA ,PLA_LWAKE_CTRL_REG , ocp_data); +pla_ocp_write_byte (tp,PLA_LWAKE_CTRL_REG , ocp_data); - ocp_data =ocp_read_word (tp,MCU_TYPE_USB ,USB_SSPHYLINK1 ); + ocp_data =usb_ocp_read_word (tp,USB_SSPHYLINK1 ); ocp_data &= ~DELAY_PHY_PWR_CHG ; -ocp_write_word (tp,MCU_TYPE_USB ,USB_SSPHYLINK1 , ocp_data); +usb_ocp_write_word (tp,USB_SSPHYLINK1 , ocp_data);r8153_aldps_en (tp, true);
@@ -5012,9 +5018,9 @@ static void rtl8153_down(struct r8152 *tp)return ; } - ocp_data =ocp_read_byte (tp,MCU_TYPE_PLA ,PLA_CONFIG6 ); + ocp_data =pla_ocp_read_byte (tp,PLA_CONFIG6 ); ocp_data &= ~LANWAKE_CLR_EN ; -ocp_write_byte (tp,MCU_TYPE_PLA ,PLA_CONFIG6 , ocp_data); +pla_ocp_write_byte (tp,PLA_CONFIG6 , ocp_data);r8153_u1u2en (tp, false);r8153_u2p3en (tp, false);
@@ -5036,11 +5042,11 @@ static void rtl8153b_up(struct r8152 *tp)r8153_aldps_en (tp, false);r8153_first_init (tp); -ocp_write_dword (tp,MCU_TYPE_USB ,USB_RX_BUF_TH ,RX_THR_B ); +usb_ocp_write_dword (tp,USB_RX_BUF_TH ,RX_THR_B ); - ocp_data =ocp_read_word (tp,MCU_TYPE_PLA ,PLA_MAC_PWR_CTRL3 ); + ocp_data =pla_ocp_read_word (tp,PLA_MAC_PWR_CTRL3 ); ocp_data &= ~PLA_MCU_SPDWN_EN ; -ocp_write_word (tp,MCU_TYPE_PLA ,PLA_MAC_PWR_CTRL3 , ocp_data); +pla_ocp_write_word (tp,PLA_MAC_PWR_CTRL3 , ocp_data);r8153_aldps_en (tp, true);
@@ -5057,9 +5063,9 @@ static void rtl8153b_down(struct r8152 *tp)return ; } - ocp_data =ocp_read_word (tp,MCU_TYPE_PLA ,PLA_MAC_PWR_CTRL3 ); + ocp_data =pla_ocp_read_word (tp,PLA_MAC_PWR_CTRL3 ); ocp_data |=PLA_MCU_SPDWN_EN ; -ocp_write_word (tp,MCU_TYPE_PLA ,PLA_MAC_PWR_CTRL3 , ocp_data); +pla_ocp_write_word (tp,PLA_MAC_PWR_CTRL3 , ocp_data);r8153b_u1u2en (tp, false);r8153_u2p3en (tp, false);
@@ -5073,10 +5079,10 @@ static bool rtl8152_in_nway(struct r8152 *tp) {u16 nway_state; -ocp_write_word (tp,MCU_TYPE_PLA ,PLA_OCP_GPHY_BASE ,0x2000 ); +pla_ocp_write_word (tp,PLA_OCP_GPHY_BASE ,0x2000 ); tp->ocp_base =0x2000 ; -ocp_write_byte (tp,MCU_TYPE_PLA ,0xb014 ,0x4c );/* phy state */ - nway_state =ocp_read_word (tp,MCU_TYPE_PLA ,0xb01a ); +pla_ocp_write_byte (tp,0xb014 ,0x4c );/* phy state */ + nway_state =pla_ocp_read_word (tp,0xb01a );/* bit 15: TXDIS_STATE, bit 14: ABD_STATE */ if (nway_state &0xc000 )
@@ -5323,9 +5329,9 @@ static void rtl_tally_reset(struct r8152 *tp) {u32 ocp_data; - ocp_data =ocp_read_word (tp,MCU_TYPE_PLA ,PLA_RSTTALLY ); + ocp_data =pla_ocp_read_word (tp,PLA_RSTTALLY ); ocp_data |=TALLY_RESET ; -ocp_write_word (tp,MCU_TYPE_PLA ,PLA_RSTTALLY , ocp_data); +pla_ocp_write_word (tp,PLA_RSTTALLY , ocp_data); }static void r8152b_init (struct r8152 *tp)
@@ -5345,30 +5351,30 @@ static void r8152b_init(struct r8152 *tp)r8152_aldps_en (tp, false);if (tp->version ==RTL_VER_01 ) { - ocp_data =ocp_read_word (tp,MCU_TYPE_PLA ,PLA_LED_FEATURE ); + ocp_data =pla_ocp_read_word (tp,PLA_LED_FEATURE ); ocp_data &= ~LED_MODE_MASK ; -ocp_write_word (tp,MCU_TYPE_PLA ,PLA_LED_FEATURE , ocp_data); +pla_ocp_write_word (tp,PLA_LED_FEATURE , ocp_data); }r8152_power_cut_en (tp, false); - ocp_data =ocp_read_word (tp,MCU_TYPE_PLA ,PLA_PHY_PWR ); + ocp_data =pla_ocp_read_word (tp,PLA_PHY_PWR ); ocp_data |=TX_10M_IDLE_EN |PFM_PWM_SWITCH ; -ocp_write_word (tp,MCU_TYPE_PLA ,PLA_PHY_PWR , ocp_data); - ocp_data =ocp_read_dword (tp,MCU_TYPE_PLA ,PLA_MAC_PWR_CTRL ); +pla_ocp_write_word (tp,PLA_PHY_PWR , ocp_data); + ocp_data =pla_ocp_read_dword (tp,PLA_MAC_PWR_CTRL ); ocp_data &= ~MCU_CLK_RATIO_MASK ; ocp_data |=MCU_CLK_RATIO |D3_CLK_GATED_EN ; -ocp_write_dword (tp,MCU_TYPE_PLA ,PLA_MAC_PWR_CTRL , ocp_data); +pla_ocp_write_dword (tp,PLA_MAC_PWR_CTRL , ocp_data); ocp_data =GPHY_STS_MSK |SPEED_DOWN_MSK |SPDWN_RXDV_MSK |SPDWN_LINKCHG_MSK ; -ocp_write_word (tp,MCU_TYPE_PLA ,PLA_GPHY_INTR_IMR , ocp_data); +pla_ocp_write_word (tp,PLA_GPHY_INTR_IMR , ocp_data);rtl_tally_reset (tp);/* enable rx aggregation */ - ocp_data =ocp_read_word (tp,MCU_TYPE_USB ,USB_USB_CTRL ); + ocp_data =usb_ocp_read_word (tp,USB_USB_CTRL ); ocp_data &= ~(RX_AGG_DISABLE |RX_ZERO_EN ); -ocp_write_word (tp,MCU_TYPE_USB ,USB_USB_CTRL , ocp_data); +usb_ocp_write_word (tp,USB_USB_CTRL , ocp_data); }static void r8153_init (struct r8152 *tp)
@@ -5383,8 +5389,7 @@ static void r8153_init(struct r8152 *tp)r8153_u1u2en (tp, false);for (i =0 ; i <500 ; i++) { -if (ocp_read_word (tp,MCU_TYPE_PLA ,PLA_BOOT_CTRL ) & -AUTOLOAD_DONE ) +if (pla_ocp_read_word (tp,PLA_BOOT_CTRL ) &AUTOLOAD_DONE )break ;msleep (20 );
@@ -5409,69 +5414,69 @@ static void r8153_init(struct r8152 *tp)r8153_u2p3en (tp, false);if (tp->version ==RTL_VER_04 ) { - ocp_data =ocp_read_word (tp,MCU_TYPE_USB ,USB_SSPHYLINK2 ); + ocp_data =usb_ocp_read_word (tp,USB_SSPHYLINK2 ); ocp_data &= ~pwd_dn_scale_mask; ocp_data |=pwd_dn_scale (96 ); -ocp_write_word (tp,MCU_TYPE_USB ,USB_SSPHYLINK2 , ocp_data); +usb_ocp_write_word (tp,USB_SSPHYLINK2 , ocp_data); - ocp_data =ocp_read_byte (tp,MCU_TYPE_USB ,USB_USB2PHY ); + ocp_data =usb_ocp_read_byte (tp,USB_USB2PHY ); ocp_data |=USB2PHY_L1 |USB2PHY_SUSPEND ; -ocp_write_byte (tp,MCU_TYPE_USB ,USB_USB2PHY , ocp_data); +usb_ocp_write_byte (tp,USB_USB2PHY , ocp_data); }else if (tp->version ==RTL_VER_05 ) { - ocp_data =ocp_read_byte (tp,MCU_TYPE_PLA ,PLA_DMY_REG0 ); + ocp_data =pla_ocp_read_byte (tp,PLA_DMY_REG0 ); ocp_data &= ~ECM_ALDPS ; -ocp_write_byte (tp,MCU_TYPE_PLA ,PLA_DMY_REG0 , ocp_data); +pla_ocp_write_byte (tp,PLA_DMY_REG0 , ocp_data); - ocp_data =ocp_read_byte (tp,MCU_TYPE_USB ,USB_CSR_DUMMY1 ); -if (ocp_read_word (tp,MCU_TYPE_USB ,USB_BURST_SIZE ) ==0 ) + ocp_data =usb_ocp_read_byte (tp,USB_CSR_DUMMY1 ); +if (usb_ocp_read_word (tp,USB_BURST_SIZE ) ==0 ) ocp_data &= ~DYNAMIC_BURST ;else ocp_data |=DYNAMIC_BURST ; -ocp_write_byte (tp,MCU_TYPE_USB ,USB_CSR_DUMMY1 , ocp_data); +usb_ocp_write_byte (tp,USB_CSR_DUMMY1 , ocp_data); }else if (tp->version ==RTL_VER_06 ) { - ocp_data =ocp_read_byte (tp,MCU_TYPE_USB ,USB_CSR_DUMMY1 ); -if (ocp_read_word (tp,MCU_TYPE_USB ,USB_BURST_SIZE ) ==0 ) + ocp_data =usb_ocp_read_byte (tp,USB_CSR_DUMMY1 ); +if (usb_ocp_read_word (tp,USB_BURST_SIZE ) ==0 ) ocp_data &= ~DYNAMIC_BURST ;else ocp_data |=DYNAMIC_BURST ; -ocp_write_byte (tp,MCU_TYPE_USB ,USB_CSR_DUMMY1 , ocp_data); +usb_ocp_write_byte (tp,USB_CSR_DUMMY1 , ocp_data);r8153_queue_wake (tp, false); - ocp_data =ocp_read_word (tp,MCU_TYPE_PLA ,PLA_EXTRA_STATUS ); + ocp_data =pla_ocp_read_word (tp,PLA_EXTRA_STATUS );if (rtl8152_get_speed (tp) &LINK_STATUS ) ocp_data |=CUR_LINK_OK ;else ocp_data &= ~CUR_LINK_OK ; ocp_data |=POLL_LINK_CHG ; -ocp_write_word (tp,MCU_TYPE_PLA ,PLA_EXTRA_STATUS , ocp_data); +pla_ocp_write_word (tp,PLA_EXTRA_STATUS , ocp_data); } - ocp_data =ocp_read_byte (tp,MCU_TYPE_USB ,USB_CSR_DUMMY2 ); + ocp_data =usb_ocp_read_byte (tp,USB_CSR_DUMMY2 ); ocp_data |=EP4_FULL_FC ; -ocp_write_byte (tp,MCU_TYPE_USB ,USB_CSR_DUMMY2 , ocp_data); +usb_ocp_write_byte (tp,USB_CSR_DUMMY2 , ocp_data); - ocp_data =ocp_read_word (tp,MCU_TYPE_USB ,USB_WDT11_CTRL ); + ocp_data =usb_ocp_read_word (tp,USB_WDT11_CTRL ); ocp_data &= ~TIMER11_EN ; -ocp_write_word (tp,MCU_TYPE_USB ,USB_WDT11_CTRL , ocp_data); +usb_ocp_write_word (tp,USB_WDT11_CTRL , ocp_data); - ocp_data =ocp_read_word (tp,MCU_TYPE_PLA ,PLA_LED_FEATURE ); + ocp_data =pla_ocp_read_word (tp,PLA_LED_FEATURE ); ocp_data &= ~LED_MODE_MASK ; -ocp_write_word (tp,MCU_TYPE_PLA ,PLA_LED_FEATURE , ocp_data); +pla_ocp_write_word (tp,PLA_LED_FEATURE , ocp_data); ocp_data =FIFO_EMPTY_1FB |ROK_EXIT_LPM ;if (tp->version ==RTL_VER_04 && tp->udev->speed <USB_SPEED_SUPER ) ocp_data |=LPM_TIMER_500MS ;else ocp_data |=LPM_TIMER_500US ; -ocp_write_byte (tp,MCU_TYPE_USB ,USB_LPM_CTRL , ocp_data); +usb_ocp_write_byte (tp,USB_LPM_CTRL , ocp_data); - ocp_data =ocp_read_word (tp,MCU_TYPE_USB ,USB_AFE_CTRL2 ); + ocp_data =usb_ocp_read_word (tp,USB_AFE_CTRL2 ); ocp_data &= ~SEN_VAL_MASK ; ocp_data |=SEN_VAL_NORMAL |SEL_RXIDLE ; -ocp_write_word (tp,MCU_TYPE_USB ,USB_AFE_CTRL2 , ocp_data); +usb_ocp_write_word (tp,USB_AFE_CTRL2 , ocp_data); -ocp_write_word (tp,MCU_TYPE_USB ,USB_CONNECT_TIMER ,0x0001 ); +usb_ocp_write_word (tp,USB_CONNECT_TIMER ,0x0001 );r8153_power_cut_en (tp, false);rtl_runtime_suspend_enable (tp, false);
@@ -5479,21 +5484,21 @@ static void r8153_init(struct r8152 *tp)r8153_mac_clk_spd (tp, false);usb_enable_lpm (tp->udev); - ocp_data =ocp_read_byte (tp,MCU_TYPE_PLA ,PLA_CONFIG6 ); + ocp_data =pla_ocp_read_byte (tp,PLA_CONFIG6 ); ocp_data |=LANWAKE_CLR_EN ; -ocp_write_byte (tp,MCU_TYPE_PLA ,PLA_CONFIG6 , ocp_data); +pla_ocp_write_byte (tp,PLA_CONFIG6 , ocp_data); - ocp_data =ocp_read_byte (tp,MCU_TYPE_PLA ,PLA_LWAKE_CTRL_REG ); + ocp_data =pla_ocp_read_byte (tp,PLA_LWAKE_CTRL_REG ); ocp_data &= ~LANWAKE_PIN ; -ocp_write_byte (tp,MCU_TYPE_PLA ,PLA_LWAKE_CTRL_REG , ocp_data); +pla_ocp_write_byte (tp,PLA_LWAKE_CTRL_REG , ocp_data);/* rx aggregation */ - ocp_data =ocp_read_word (tp,MCU_TYPE_USB ,USB_USB_CTRL ); + ocp_data =usb_ocp_read_word (tp,USB_USB_CTRL ); ocp_data &= ~(RX_AGG_DISABLE |RX_ZERO_EN );if (test_bit (DELL_TB_RX_AGG_BUG , &tp->flags)) ocp_data |=RX_AGG_DISABLE ; -ocp_write_word (tp,MCU_TYPE_USB ,USB_USB_CTRL , ocp_data); +usb_ocp_write_word (tp,USB_USB_CTRL , ocp_data);rtl_tally_reset (tp);
@@ -5523,8 +5528,7 @@ static void r8153b_init(struct r8152 *tp)r8153b_u1u2en (tp, false);for (i =0 ; i <500 ; i++) { -if (ocp_read_word (tp,MCU_TYPE_PLA ,PLA_BOOT_CTRL ) & -AUTOLOAD_DONE ) +if (pla_ocp_read_word (tp,PLA_BOOT_CTRL ) &AUTOLOAD_DONE )break ;msleep (20 );
@@ -5545,52 +5549,52 @@ static void r8153b_init(struct r8152 *tp)r8153_u2p3en (tp, false);/* MSC timer = 0xfff * 8ms = 32760 ms */ -ocp_write_word (tp,MCU_TYPE_USB ,USB_MSC_TIMER ,0x0fff ); +usb_ocp_write_word (tp,USB_MSC_TIMER ,0x0fff );/* U1/U2/L1 idle timer. 500 us */ -ocp_write_word (tp,MCU_TYPE_USB ,USB_U1U2_TIMER ,500 ); +usb_ocp_write_word (tp,USB_U1U2_TIMER ,500 );r8153b_power_cut_en (tp, false);r8153b_ups_en (tp, false);r8153_queue_wake (tp, false);rtl_runtime_suspend_enable (tp, false); - ocp_data =ocp_read_word (tp,MCU_TYPE_PLA ,PLA_EXTRA_STATUS ); + ocp_data =pla_ocp_read_word (tp,PLA_EXTRA_STATUS );if (rtl8152_get_speed (tp) &LINK_STATUS ) ocp_data |=CUR_LINK_OK ;else ocp_data &= ~CUR_LINK_OK ; ocp_data |=POLL_LINK_CHG ; -ocp_write_word (tp,MCU_TYPE_PLA ,PLA_EXTRA_STATUS , ocp_data); +pla_ocp_write_word (tp,PLA_EXTRA_STATUS , ocp_data);if (tp->udev->speed !=USB_SPEED_HIGH )r8153b_u1u2en (tp, true);usb_enable_lpm (tp->udev);/* MAC clock speed down */ - ocp_data =ocp_read_word (tp,MCU_TYPE_PLA ,PLA_MAC_PWR_CTRL2 ); + ocp_data =pla_ocp_read_word (tp,PLA_MAC_PWR_CTRL2 ); ocp_data |=MAC_CLK_SPDWN_EN ; -ocp_write_word (tp,MCU_TYPE_PLA ,PLA_MAC_PWR_CTRL2 , ocp_data); +pla_ocp_write_word (tp,PLA_MAC_PWR_CTRL2 , ocp_data); - ocp_data =ocp_read_word (tp,MCU_TYPE_PLA ,PLA_MAC_PWR_CTRL3 ); + ocp_data =pla_ocp_read_word (tp,PLA_MAC_PWR_CTRL3 ); ocp_data &= ~PLA_MCU_SPDWN_EN ; -ocp_write_word (tp,MCU_TYPE_PLA ,PLA_MAC_PWR_CTRL3 , ocp_data); +pla_ocp_write_word (tp,PLA_MAC_PWR_CTRL3 , ocp_data);if (tp->version ==RTL_VER_09 ) {/* Disable Test IO for 32QFN */ -if (ocp_read_byte (tp,MCU_TYPE_PLA ,0xdc00 ) &BIT (5 )) { - ocp_data =ocp_read_word (tp,MCU_TYPE_PLA ,PLA_PHY_PWR ); +if (pla_ocp_read_byte (tp,0xdc00 ) &BIT (5 )) { + ocp_data =pla_ocp_read_word (tp,PLA_PHY_PWR ); ocp_data |=TEST_IO_OFF ; -ocp_write_word (tp,MCU_TYPE_PLA ,PLA_PHY_PWR , ocp_data); +pla_ocp_write_word (tp,PLA_PHY_PWR , ocp_data); } }set_bit (GREEN_ETHERNET , &tp->flags);/* rx aggregation */ - ocp_data =ocp_read_word (tp,MCU_TYPE_USB ,USB_USB_CTRL ); + ocp_data =usb_ocp_read_word (tp,USB_USB_CTRL ); ocp_data &= ~(RX_AGG_DISABLE |RX_ZERO_EN ); -ocp_write_word (tp,MCU_TYPE_USB ,USB_USB_CTRL , ocp_data); +usb_ocp_write_word (tp,USB_USB_CTRL , ocp_data);rtl_tally_reset (tp);
@@ -5756,15 +5760,14 @@ static int rtl8152_runtime_suspend(struct r8152 *tp)if (netif_carrier_ok (netdev)) {u32 ocp_data; - rcr =ocp_read_dword (tp,MCU_TYPE_PLA ,PLA_RCR ); + rcr =pla_ocp_read_dword (tp,PLA_RCR ); ocp_data = rcr & ~RCR_ACPT_ALL ; -ocp_write_dword (tp,MCU_TYPE_PLA ,PLA_RCR , ocp_data); +pla_ocp_write_dword (tp,PLA_RCR , ocp_data);rxdy_gated_en (tp, true); - ocp_data =ocp_read_byte (tp,MCU_TYPE_PLA , -PLA_OOB_CTRL ); + ocp_data =pla_ocp_read_byte (tp,PLA_OOB_CTRL );if (!(ocp_data &RXFIFO_EMPTY )) {rxdy_gated_en (tp, false); -ocp_write_dword (tp,MCU_TYPE_PLA ,PLA_RCR , rcr); +pla_ocp_write_dword (tp,PLA_RCR , rcr);clear_bit (SELECTIVE_SUSPEND , &tp->flags);smp_mb__after_atomic (); ret = -EBUSY ;
@@ -5783,7 +5786,7 @@ static int rtl8152_runtime_suspend(struct r8152 *tp)napi_disable (napi);rtl_stop_rx (tp);rxdy_gated_en (tp, false); -ocp_write_dword (tp,MCU_TYPE_PLA ,PLA_RCR , rcr); +pla_ocp_write_dword (tp,PLA_RCR , rcr);napi_enable (napi); }
@@ -6450,7 +6453,7 @@ static int rtl8152_change_mtu(struct net_device *dev, int new_mtu)if (netif_running (dev)) {u32 rms = new_mtu +VLAN_ETH_HLEN +ETH_FCS_LEN ; -ocp_write_word (tp,MCU_TYPE_PLA ,PLA_RMS , rms); +pla_ocp_write_word (tp,PLA_RMS , rms);if (netif_carrier_ok (dev))r8153_set_rx_early_size (tp);
Signature · 1 line
2.26.2
Re: [PATCH net-next 3/5] r8152: add MCU typed read/write functions
Quoted 6 lines · Marek Behún
Add
pla_andusb_prefixed versions of ocp_read_* and ocp_write_* functions. This saves us from always writing MCU_TYPE_PLA/MCU_TYPE_USB as parameter.Signed-off-by Marek Behún <[email protected]>---
You just made it harder for everyone to follow the code through pattern matching. Token concatenation should be banned from the C preprocessor.
Re: [PATCH net-next 3/5] r8152: add MCU typed read/write functions
Quoted 10 lines · On Tue, 3 Nov 2020 23:47:12 +0200 Vladimir Oltean <[email protected]> wrote:
Quoted 6 lines · Marek Behún
Add
pla_andusb_prefixed versions of ocp_read_* and ocp_write_* functions. This saves us from always writing MCU_TYPE_PLA/MCU_TYPE_USB as parameter.Signed-off-by Marek Behún <[email protected]>---
You just made it harder for everyone to follow the code through pattern matching. Token concatenation should be banned from the C preprocessor.
So you aren't complaining about the definition of pla_ and usb_ functions, just that they are defined via macros?
Re: [PATCH net-next 3/5] r8152: add MCU typed read/write functions
Quoted 8 lines · Marek Behún
Quoted 5 lines · On Tue, 3 Nov 2020 23:47:12 +0200 Vladimir Oltean <[email protected]> wrote:
Quoted 4 lines · Marek Behún
Add
pla_andusb_prefixed versions of ocp_read_* and ocp_write_* functions. This saves us from always writing MCU_TYPE_PLA/MCU_TYPE_USB as parameter.
Quoted 8 lines
Quoted 5 lines
Quoted 2 lines
Signed-off-by Marek Behún <[email protected]>---
You just made it harder for everyone to follow the code through pattern matching. Token concatenation should be banned from the C preprocessor.
So you aren't complaining about the definition of
pla_andusb_functions, just that they are defined via macros?
Yes.
Re: [PATCH net-next 3/5] r8152: add MCU typed read/write functions
Quoted 4 lines · On Wed, 4 Nov 2020 10:47:10 +0200 Vladimir Oltean <[email protected]> wrote:
Quoted 2 lines
So you aren't complaining about the definition of
pla_andusb_functions, just that they are defined via macros?Yes.
What if concatenation wasn't used, but the functions were still defined with macro?
DEFINE_READ_FUNC(pla_ocp_read_byte, u8, MCU_TYPE_PLA, ocp_read_byte) DEFINE_WRITE_FUNC(pla_ocp_write_byte, u8, MCU_TYPE_PLA, ocp_write_byte)
DEFINE_READ_FUNC(pla_ocp_read_word, u16, MCU_TYPE_PLA, ocp_read_word) DEFINE_WRITE_FUNC(pla_ocp_write_word, u16, MCU_TYPE_PLA, ocp_write_word)
DEFINE_READ_FUNC(pla_ocp_read_dword, u32, MCU_TYPE_PLA, ocp_read_dword) DEFINE_WRITE_FUNC(pla_ocp_write_dword, u32, MCU_TYPE_PLA, ocp_write_dword)
DEFINE_READ_FUNC(usb_ocp_read_byte, u8, MCU_TYPE_USB, ocp_read_byte) DEFINE_WRITE_FUNC(usb_ocp_write_byte, u8, MCU_TYPE_USB, ocp_write_byte)
DEFINE_READ_FUNC(usb_ocp_read_word, u16, MCU_TYPE_USB, ocp_read_word) DEFINE_WRITE_FUNC(usb_ocp_write_word, u16, MCU_TYPE_USB, ocp_write_word)
DEFINE_READ_FUNC(usb_ocp_read_dword, u32, MCU_TYPE_USB, ocp_read_dword) DEFINE_WRITE_FUNC(usb_ocp_write_dword, u32, MCU_TYPE_USB, ocp_write_dword)
This way there is no concantenation. Or should I abandon macros at all?
Marek
Re: [PATCH net-next 3/5] r8152: add MCU typed read/write functions
Or something like this?
#define DEF_R_FUNC(_t, _r, _r_i, _mcu) \
static inline _t _r(struct r8152 *tp, u16 index) \
{ \
return _r_i(tp, _mcu, index); \
}#define DEF_W_FUNC(_t, _w, _w_i, _mcu) \
static inline void _w(struct r8152 *tp, u16 index, _t data) \
{ \
_w_i(tp, _mcu, index, data); \
}DEF_R_FUNC(u8, pla_ocp_read_byte, ocp_read_byte, MCU_TYPE_PLA) DEF_W_FUNC(u8, pla_ocp_write_byte, ocp_write_byte, MCU_TYPE_PLA) DEF_R_FUNC(u16, pla_ocp_read_word, ocp_read_word, MCU_TYPE_PLA) DEF_W_FUNC(u16, pla_ocp_write_word, ocp_write_word, MCU_TYPE_PLA) DEF_R_FUNC(u32, pla_ocp_read_dword, ocp_read_dword, MCU_TYPE_PLA) DEF_W_FUNC(u32, pla_ocp_write_dword, ocp_write_dword, MCU_TYPE_PLA)
DEF_R_FUNC(u8, usb_ocp_read_byte, ocp_read_byte, MCU_TYPE_USB) DEF_W_FUNC(u8, usb_ocp_write_byte, ocp_write_byte, MCU_TYPE_USB) DEF_R_FUNC(u16, usb_ocp_read_word, ocp_read_word, MCU_TYPE_USB) DEF_W_FUNC(u16, usb_ocp_write_word, ocp_write_word, MCU_TYPE_USB) DEF_R_FUNC(u32, usb_ocp_read_dword, ocp_read_dword, MCU_TYPE_USB) DEF_W_FUNC(u32, usb_ocp_write_dword, ocp_write_dword, MCU_TYPE_USB)
Re: [PATCH net-next 3/5] r8152: add MCU typed read/write functions
Quoted 21 lines · Marek Behún
Or something like this?
#define
DEF_R_FUNC(_t, _r, _r_i, _mcu)\
static inline _t_r(struct r8152 *tp, u16 index)\{ \ return _r_i(tp, _mcu, index); \ }#define
DEF_W_FUNC(_t, _w, _w_i, _mcu)\
static inline void_w(struct r8152 *tp, u16 index, _t data)\{ \ _w_i(tp, _mcu, index, data); \ }
DEF_R_FUNC(u8, pla_ocp_read_byte, ocp_read_byte, MCU_TYPE_PLA)DEF_W_FUNC(u8, pla_ocp_write_byte, ocp_write_byte, MCU_TYPE_PLA)DEF_R_FUNC(u16, pla_ocp_read_word, ocp_read_word, MCU_TYPE_PLA)DEF_W_FUNC(u16, pla_ocp_write_word, ocp_write_word, MCU_TYPE_PLA)DEF_R_FUNC(u32, pla_ocp_read_dword, ocp_read_dword, MCU_TYPE_PLA)DEF_W_FUNC(u32, pla_ocp_write_dword, ocp_write_dword, MCU_TYPE_PLA)
Quoted 6 lines
DEF_R_FUNC(u8, usb_ocp_read_byte, ocp_read_byte, MCU_TYPE_USB)DEF_W_FUNC(u8, usb_ocp_write_byte, ocp_write_byte, MCU_TYPE_USB)DEF_R_FUNC(u16, usb_ocp_read_word, ocp_read_word, MCU_TYPE_USB)DEF_W_FUNC(u16, usb_ocp_write_word, ocp_write_word, MCU_TYPE_USB)DEF_R_FUNC(u32, usb_ocp_read_dword, ocp_read_dword, MCU_TYPE_USB)DEF_W_FUNC(u32, usb_ocp_write_dword, ocp_write_dword, MCU_TYPE_USB)
I'm not sure it's worth the change :(
Let's put it another way, your diffstat has 338 insertions and 335 deletions. Aka you're saving 3 lines overall.
With this new approach that doesn't use token concatenation at all, you're probably not saving anything at all.
Also, I'm not sure that you need to make the functions inline. The compiler should be smart enough to not generate functions for usb_ocp_read_byte etc. You can check with
"make drivers/net/usb/r8152.lst".
Re: [PATCH net-next 3/5] r8152: add MCU typed read/write functions
Quoted 29 lines · On Wed, 4 Nov 2020 13:00:59 +0200 Vladimir Oltean <[email protected]> wrote:
Quoted 21 lines · Marek Behún
Or something like this?
#define
DEF_R_FUNC(_t, _r, _r_i, _mcu)\
static inline _t_r(struct r8152 *tp, u16 index)\{ \ return _r_i(tp, _mcu, index); \ }#define
DEF_W_FUNC(_t, _w, _w_i, _mcu)\
static inline void_w(struct r8152 *tp, u16 index, _t data)\{ \ _w_i(tp, _mcu, index, data); \ }
DEF_R_FUNC(u8, pla_ocp_read_byte, ocp_read_byte, MCU_TYPE_PLA)DEF_W_FUNC(u8, pla_ocp_write_byte, ocp_write_byte, MCU_TYPE_PLA)DEF_R_FUNC(u16, pla_ocp_read_word, ocp_read_word, MCU_TYPE_PLA)DEF_W_FUNC(u16, pla_ocp_write_word, ocp_write_word, MCU_TYPE_PLA)DEF_R_FUNC(u32, pla_ocp_read_dword, ocp_read_dword, MCU_TYPE_PLA)DEF_W_FUNC(u32, pla_ocp_write_dword, ocp_write_dword, MCU_TYPE_PLA)Quoted 6 lines
DEF_R_FUNC(u8, usb_ocp_read_byte, ocp_read_byte, MCU_TYPE_USB)DEF_W_FUNC(u8, usb_ocp_write_byte, ocp_write_byte, MCU_TYPE_USB)DEF_R_FUNC(u16, usb_ocp_read_word, ocp_read_word, MCU_TYPE_USB)DEF_W_FUNC(u16, usb_ocp_write_word, ocp_write_word, MCU_TYPE_USB)DEF_R_FUNC(u32, usb_ocp_read_dword, ocp_read_dword, MCU_TYPE_USB)DEF_W_FUNC(u32, usb_ocp_write_dword, ocp_write_dword, MCU_TYPE_USB)
Quoted 9 lines
I'm not sure it's worth the change :(
Let's put it another way, your diffstat has 338 insertions and 335 deletions. Aka you're saving 3 lines overall.
With this new approach that doesn't use token concatenation at all, you're probably not saving anything at all.
Also, I'm not sure that you need to make the functions inline. The compiler should be smart enough to not generate functions forusb_ocp_read_byteetc. You can check with
"makedrivers/net/usb/r8152.lst".
Vladimir, the purpose of this patch isn't to save lines, but to save us from always writing MCU_TYPE_USB / MCU_TYPE_PLA.
It just transforms forms of
ocp_read_word(tp, MCU_TYPE_USB, idx);
ocp_write_dword(tp, MCU_TYPE_PLA, idx, val);
into
usb_ocp_read_word(tp, idx);
pla_ocp_write_dword(tp, idx, val);
The fifth patch of this series saves lines by adding _modify functions, to transform
val = *_read(idx);
val &= ~clr;
val |= set;
*_write(idx, val);
into
*_modify(idx, clr, set);
Re: [PATCH net-next 3/5] r8152: add MCU typed read/write functions
Quoted 19 lines · Marek Behún
Quoted 9 lines
I'm not sure it's worth the change :(
Let's put it another way, your diffstat has 338 insertions and 335 deletions. Aka you're saving 3 lines overall.
With this new approach that doesn't use token concatenation at all, you're probably not saving anything at all.
Also, I'm not sure that you need to make the functions inline. The compiler should be smart enough to not generate functions forusb_ocp_read_byteetc. You can check with
"makedrivers/net/usb/r8152.lst".Vladimir, the purpose of this patch isn't to save lines, but to save us from always writing
MCU_TYPE_USB/MCU_TYPE_PLA.
It just transforms forms of
ocp_read_word(tp, MCU_TYPE_USB, idx);
ocp_write_dword(tp, MCU_TYPE_PLA, idx, val);
into
usb_ocp_read_word(tp, idx);
pla_ocp_write_dword(tp, idx, val);
Quoted 9 lines
The fifth patch of this series saves lines by adding
_modifyfunctions, to transform
val =*_read(idx);
val &= ~clr;
val |= set;
*_write(idx, val);
into
*_modify(idx, clr, set);
So if the point isn't to save lines, then why don't you go for something trivial?
static void ocp_modify_byte(struct r8152 *tp, u16 type, u16 index, u8 clr,
u8 set)
{
u8 val = ocp_read_byte(tp, type, index);
ocp_write_byte(tp, type, index, (val & ~clr) | set);
}static void ocp_modify_word(struct r8152 *tp, u16 type, u16 index, u16 clr,
u16 set)
{
u16 val = ocp_read_word(tp, type, index);
ocp_write_word(tp, type, index, (val & ~clr) | set);
}static void ocp_modify_dword(struct r8152 *tp, u16 type, u16 index, u32 clr,
u32 set)
{
u32 val = ocp_read_dword(tp, type, index);
ocp_write_dword(tp, type, index, (val & ~clr) | set);
}#define pla_ocp_read_byte(tp, index) \
ocp_read_byte(tp, MCU_TYPE_PLA, index)
#define pla_ocp_write_byte(tp, index, data) \
ocp_write_byte(tp, MCU_TYPE_PLA, index, data)
#define pla_ocp_modify_byte(tp, index, clr, set) \
ocp_modify_byte(tp, MCU_TYPE_PLA, index, clr, set)
#define pla_ocp_read_word(tp, index) \
ocp_read_word(tp, MCU_TYPE_PLA, index)
#define pla_ocp_write_word(tp, index, data) \
ocp_write_word(tp, MCU_TYPE_PLA, index, data)
#define pla_ocp_modify_word(tp, index, clr, set) \
ocp_modify_word(tp, MCU_TYPE_PLA, index, clr, set)
#define pla_ocp_read_dword(tp, index) \
ocp_read_dword(tp, MCU_TYPE_PLA, index)
#define pla_ocp_write_dword(tp, index, data) \
ocp_write_dword(tp, MCU_TYPE_PLA, index, data)
#define pla_ocp_modify_dword(tp, index, clr, set) \
ocp_modify_dword(tp, MCU_TYPE_PLA, index, clr, set)
#define usb_ocp_read_byte(tp, index) \
ocp_read_byte(tp, MCU_TYPE_USB, index)
#define usb_ocp_write_byte(tp, index, data) \
ocp_write_byte(tp, MCU_TYPE_USB, index, data)
#define usb_ocp_modify_byte(tp, index, clr, set) \
ocp_modify_byte(tp, MCU_TYPE_USB, index, clr, set)
#define usb_ocp_read_word(tp, index) \
ocp_read_word(tp, MCU_TYPE_USB, index)
#define usb_ocp_write_word(tp, index, data) \
ocp_write_word(tp, MCU_TYPE_USB, index, data)
#define usb_ocp_modify_word(tp, index, clr, set) \
ocp_modify_word(tp, MCU_TYPE_USB, index, clr, set)
#define usb_ocp_read_dword(tp, index) \
ocp_read_dword(tp, MCU_TYPE_USB, index)
#define usb_ocp_write_dword(tp, index, data) \
ocp_write_dword(tp, MCU_TYPE_USB, index, data)
#define usb_ocp_modify_dword(tp, index, clr, set) \
ocp_modify_dword(tp, MCU_TYPE_USB, index, clr, set)
To my eyes this is easier to digest.
That is, unless you want to go for function pointers and have separate structures for PLA and USB...
Jakub Kicinski
maintainerRe: [PATCH net-next 3/5] r8152: add MCU typed read/write functions
Quoted 1 line · On Wed, 4 Nov 2020 14:14:24 +0200 Vladimir Oltean wrote:
To my eyes this is easier to digest.
+1
Re: [PATCH net-next 3/5] r8152: add MCU typed read/write functions
In reply to Vladimir OlteanQuoted 95 lines · On Wed, 4 Nov 2020 14:14:24 +0200 Vladimir Oltean <[email protected]> wrote:
Quoted 19 lines · Marek Behún
Quoted 9 lines
I'm not sure it's worth the change :(
Let's put it another way, your diffstat has 338 insertions and 335 deletions. Aka you're saving 3 lines overall.
With this new approach that doesn't use token concatenation at all, you're probably not saving anything at all.
Also, I'm not sure that you need to make the functions inline. The compiler should be smart enough to not generate functions forusb_ocp_read_byteetc. You can check with
"makedrivers/net/usb/r8152.lst".Vladimir, the purpose of this patch isn't to save lines, but to save us from always writing
MCU_TYPE_USB/MCU_TYPE_PLA.
It just transforms forms of
ocp_read_word(tp, MCU_TYPE_USB, idx);
ocp_write_dword(tp, MCU_TYPE_PLA, idx, val);
into
usb_ocp_read_word(tp, idx);
pla_ocp_write_dword(tp, idx, val);Quoted 9 lines
The fifth patch of this series saves lines by adding
_modifyfunctions, to transform
val =*_read(idx);
val &= ~clr;
val |= set;
*_write(idx, val);
into
*_modify(idx, clr, set);So if the point isn't to save lines, then why don't you go for something trivial?
static void ocp_modify_byte(struct r8152 *tp, u16 type, u16 index, u8 clr,
u8 set) { u8 val = ocp_read_byte(tp, type, index); ocp_write_byte(tp, type, index, (val & ~clr) | set); }static void ocp_modify_word(struct r8152 *tp, u16 type, u16 index, u16 clr,
u16 set) { u16 val = ocp_read_word(tp, type, index); ocp_write_word(tp, type, index, (val & ~clr) | set); }static void ocp_modify_dword(struct r8152 *tp, u16 type, u16 index, u32 clr,
u32 set) { u32 val = ocp_read_dword(tp, type, index); ocp_write_dword(tp, type, index, (val & ~clr) | set); }#define
pla_ocp_read_byte(tp, index)\
ocp_read_byte(tp, MCU_TYPE_PLA, index)
#definepla_ocp_write_byte(tp, index, data)\
ocp_write_byte(tp, MCU_TYPE_PLA, index, data)
#definepla_ocp_modify_byte(tp, index, clr, set)\
ocp_modify_byte(tp, MCU_TYPE_PLA, index, clr, set)
#definepla_ocp_read_word(tp, index)\
ocp_read_word(tp, MCU_TYPE_PLA, index)
#definepla_ocp_write_word(tp, index, data)\
ocp_write_word(tp, MCU_TYPE_PLA, index, data)
#definepla_ocp_modify_word(tp, index, clr, set)\
ocp_modify_word(tp, MCU_TYPE_PLA, index, clr, set)
#definepla_ocp_read_dword(tp, index)\
ocp_read_dword(tp, MCU_TYPE_PLA, index)
#definepla_ocp_write_dword(tp, index, data)\
ocp_write_dword(tp, MCU_TYPE_PLA, index, data)
#definepla_ocp_modify_dword(tp, index, clr, set)\
ocp_modify_dword(tp, MCU_TYPE_PLA, index, clr, set)#define
usb_ocp_read_byte(tp, index)\
ocp_read_byte(tp, MCU_TYPE_USB, index)
#defineusb_ocp_write_byte(tp, index, data)\
ocp_write_byte(tp, MCU_TYPE_USB, index, data)
#defineusb_ocp_modify_byte(tp, index, clr, set)\
ocp_modify_byte(tp, MCU_TYPE_USB, index, clr, set)
#defineusb_ocp_read_word(tp, index)\
ocp_read_word(tp, MCU_TYPE_USB, index)
#defineusb_ocp_write_word(tp, index, data)\
ocp_write_word(tp, MCU_TYPE_USB, index, data)
#defineusb_ocp_modify_word(tp, index, clr, set)\
ocp_modify_word(tp, MCU_TYPE_USB, index, clr, set)
#defineusb_ocp_read_dword(tp, index)\
ocp_read_dword(tp, MCU_TYPE_USB, index)
#defineusb_ocp_write_dword(tp, index, data)\
ocp_write_dword(tp, MCU_TYPE_USB, index, data)
#defineusb_ocp_modify_dword(tp, index, clr, set)\
ocp_modify_dword(tp, MCU_TYPE_USB, index, clr, set)
Quoted 4 lines
To my eyes this is easier to digest.
That is, unless you want to go for function pointers and have separate structures for PLA and USB...
I thought that static inline functions are preferred to macros, since compiler warns better if they are used incorrectly...
Re: [PATCH net-next 3/5] r8152: add MCU typed read/write functions
Quoted 2 lines · Marek Behún
I thought that static inline functions are preferred to macros, since compiler warns better if they are used incorrectly...
Citation needed. Also, how do static inline functions wrapped in macros (i.e. your patch) stack up against your claim about better warnings? I guess ease of maintainership should prevail here, and Hayes should have the final word. I don't really have any stake here.
Re: [PATCH net-next 3/5] r8152: add MCU typed read/write functions
Quoted 5 lines · On Thu, 5 Nov 2020 12:56:42 +0200 Vladimir Oltean <[email protected]> wrote:
Quoted 2 lines · Marek Behún
I thought that static inline functions are preferred to macros, since compiler warns better if they are used incorrectly...
Citation needed.
Just search for substring "instead of macro" in git log, there are multiple such changes that were accepted since it provides better typechecking. I am not saying it is documented anywhere, just that I thought it was preffered.
Quoted 2 lines
Also, how do static inline functions wrapped in macros (i.e. your patch) stack up against your claim about better warnings?
If they are defined as functions (they don't have to be inline, of course) instead of macros and they are used incorrectly, the compiler provides more readable warnings. (Yes, in current versions of gcc it is much better than in the past, but still there are more lines of warnings printed: "in expansion of macro"...).
Quoted 2 lines
I guess ease of maintainership should prevail here, and Hayes should have the final word. I don't really have any stake here.
Vladimir, your arguments are valid and I accept the reasoning. I too can see that the resulting code is a little awkward.
Marek
Re: [PATCH net-next 3/5] r8152: add MCU typed read/write functions
Quoted 14 lines · Marek Behún
Quoted 5 lines · On Thu, 5 Nov 2020 12:56:42 +0200 Vladimir Oltean <[email protected]> wrote:
Quoted 2 lines · Marek Behún
I thought that static inline functions are preferred to macros, since compiler warns better if they are used incorrectly...
Citation needed.
Just search for substring "instead of macro" in git log, there are multiple such changes that were accepted since it provides better typechecking. I am not saying it is documented anywhere, just that I thought it was preffered.
Quoted 8 lines
Quoted 2 lines
Also, how do static inline functions wrapped in macros (i.e. your patch) stack up against your claim about better warnings?
If they are defined as functions (they don't have to be inline, of course) instead of macros and they are used incorrectly, the compiler provides more readable warnings. (Yes, in current versions of gcc it is much better than in the past, but still there are more lines of warnings printed: "in expansion of macro"...).
Ok, but I mean, we're not even in contradiction at this point? I only provided you macro definitions of pla_ocp_* and usb_ocp_* to prove that they can be defined in a cleaner way than your attempt. If you still think it's worth having the pla_ocp_* and usb_ocp_* helpers defined as separate functions just to avoid passing the extra MCU_TYPE_* argument, then go ahead.
RE: [PATCH net-next 3/5] r8152: add MCU typed read/write functions
In reply to Vladimir OlteanVladimir Oltean <[email protected]>
Quoted 9 lines
Sent: Thursday, November 5, 2020 6:57 PM
Quoted 2 lines · Marek Behún
I thought that static inline functions are preferred to macros, since compiler warns better if they are used incorrectly...
Citation needed. Also, how do static inline functions wrapped in macros (i.e. your patch) stack up against your claim about better warnings? I guess ease of maintainership should prevail here, and Hayes should have the final word. I don't really have any stake here.
I agree with Vladimir Oltean.
I prefer to the way of easy maintaining.
I don't understand the advantage which you discuss. However, if I am not familiar with the code, this patch would let me take more time to find out the declarations of these functions. This make it harder to trace the code.
Best Regards,
Hayes
Re: [PATCH net-next 3/5] r8152: add MCU typed read/write functions
Quoted 11 lines · On Fri, 6 Nov 2020 03:01:22 +0000 Hayes Wang <[email protected]> wrote:
Vladimir Oltean <[email protected]>
Quoted 9 lines
Sent: Thursday, November 5, 2020 6:57 PM
Quoted 2 lines · Marek Behún
I thought that static inline functions are preferred to macros, since compiler warns better if they are used incorrectly...
Citation needed. Also, how do static inline functions wrapped in macros (i.e. your patch) stack up against your claim about better warnings? I guess ease of maintainership should prevail here, and Hayes should have the final word. I don't really have any stake here.
Quoted 7 lines
I agree with Vladimir Oltean.
I prefer to the way of easy maintaining.
I don't understand the advantage which you discuss. However, if I am not familiar with the code, this patch would let me take more time to find out the declarations of these functions. This make it harder to trace the code.
Hi Hayes,
just to be clear:
Are you against defining these functions via macros?
If so, I can simply rewrite this so that it does not use macros...
Or are you against implementing these functions themselves? Should I abandon this at all?
BTW, what about patch 5/5 which introduces *_modify helpers? Patch 5/5 simplifies the driver a lot, IMO, changing this
ocp_data = usb_ocp_read_word(tp, USB_PM_CTRL_STATUS); ocp_data &= ~RESUME_INDICATE; usb_ocp_write_word(tp, USB_PM_CTRL_STATUS, ocp_data);
into this
usb_ocp_modify_word(tp, USB_PM_CTRL_STATUS, RESUME_INDICATE, 0);
Marek
RE: [PATCH net-next 3/5] r8152: add MCU typed read/write functions
Marek Behún <[email protected]>
Quoted 1 line
Sent: Friday, November 6, 2020 2:40 PM
[...]
Quoted 5 lines
Hi Hayes,
just to be clear:
Are you against defining these functions via macros?
If so, I can simply rewrite this so that it does not use macros...
I would like the way which let me find the source of the function easily. I don't like that I couldn't find where these functions are defined, when I search whole the source code.
For example, for the method which Vladimir Oltean provides, when I search the keyword "pla_ocp_read_byte", I could easily find out that the source function is "ocp_read_byte". However, for your patch, I could only find where the function is used. I think it is not friendly for the newbie who is not familiar with this driver.
However, I don't think I am the decision maker. This is just my view.
Quoted 1 line
Or are you against implementing these functions themselves?
No.
Quoted 2 lines
BTW, what about patch 5/5 which introduces
*_modifyhelpers?
It is fine.
Best Regards,
Hayes
PATCH 4/5 r8152: rename r8153_phy_status to r8153_phy_status_wait
In reply to Marek BehúnThe idea behind r8153_phy_status function is to wait till status is of desired value or (if desired value is zero) to wait till status if of non-zero value. Rename this function to r8153_phy_status_wait.
--- drivers/net/usb/r8152.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-)
drivers/net/usb/r8152.c +7 -7
@@ -3198,7 +3198,7 @@ static void r8153b_green_en(struct r8152 *tp, bool enable) tp->ups_info.green = enable; } -static u16 r8153_phy_status (struct r8152 *tp,u16 desired) +static u16 r8153_phy_status_wait (struct r8152 *tp,u16 desired) {u16 data;int i;
@@ -3249,7 +3249,7 @@ static void r8153b_ups_en(struct r8152 *tp, bool enable) ocp_data &= ~PCUT_STATUS ;usb_ocp_write_word (tp,USB_MISC_0 , ocp_data); - data =r8153_phy_status (tp,0 ); + data =r8153_phy_status_wait (tp,0 );switch (data) {case PHY_STAT_PWRDN :
@@ -3262,7 +3262,7 @@ static void r8153b_ups_en(struct r8152 *tp, bool enable) data |=BMCR_RESET ;r8152_mdio_write (tp,MII_BMCR , data); - data =r8153_phy_status (tp,PHY_STAT_LAN_ON ); + data =r8153_phy_status_wait (tp,PHY_STAT_LAN_ON ); fallthrough;default :
@@ -5397,7 +5397,7 @@ static void r8153_init(struct r8152 *tp)break ; } - data =r8153_phy_status (tp,0 ); + data =r8153_phy_status_wait (tp,0 );if (tp->version ==RTL_VER_03 || tp->version ==RTL_VER_04 || tp->version ==RTL_VER_05 )
@@ -5409,7 +5409,7 @@ static void r8153_init(struct r8152 *tp)r8152_mdio_write (tp,MII_BMCR , data); } - data =r8153_phy_status (tp,PHY_STAT_LAN_ON ); + data =r8153_phy_status_wait (tp,PHY_STAT_LAN_ON );r8153_u2p3en (tp, false);
@@ -5536,7 +5536,7 @@ static void r8153b_init(struct r8152 *tp)break ; } - data =r8153_phy_status (tp,0 ); + data =r8153_phy_status_wait (tp,0 ); data =r8152_mdio_read (tp,MII_BMCR );if (data &BMCR_PDOWN ) {
@@ -5544,7 +5544,7 @@ static void r8153b_init(struct r8152 *tp)r8152_mdio_write (tp,MII_BMCR , data); } - data =r8153_phy_status (tp,PHY_STAT_LAN_ON ); + data =r8153_phy_status_wait (tp,PHY_STAT_LAN_ON );r8153_u2p3en (tp, false);
Signature · 1 line
2.26.2
PATCH 5/5 r8152: use *_modify helpers instead of read/write combos
In reply to Marek BehúnAdd *_modify helpers to clear and set bits. Use these helpers such as
x_modify(addr, clr, set);
instead of:
reg = x_read(addr);
reg &= ~clr;
reg |= set;
x_write(addr, reg);
This seems to be the way other parts of Linux are taking.
--- drivers/net/usb/r8152.c | 841 +++++++++++----------------------------- 1 file changed, 233 insertions(+), 608 deletions(-)
drivers/net/usb/r8152.c +233 -608
@@ -1314,6 +1314,14 @@ static inline void _p ## _ocp_write_ ## _n(struct r8152 *tp, u16 index, \ _t data) \ { \ ocp_write_ ## _n(tp, _mcutype, index, data); \ +} \ +static inline void _p ## _ocp_modify_ ## _n(struct r8152 *tp, \ +u16 index,_t clr,_t set) \ +{ \ +_t val; \ + val = _p ## _ocp_read_ ## _n(tp, index); \ + val = (val & ~clr) | set; \ + _p ## _ocp_write_ ## _n(tp, index, val); \ }DEFINE_FUNCS_FOR_MCU_TYPE (pla,MCU_TYPE_PLA , u8, byte)
@@ -1352,6 +1360,11 @@ static void ocp_reg_write(struct r8152 *tp, u16 addr, u16 data)pla_ocp_write_word (tp, ocp_index, data); } +static void ocp_reg_modify (struct r8152 *tp,u16 addr,u16 clr,u16 set) +{ +ocp_reg_write (tp, addr, (ocp_reg_read (tp, addr) & ~clr) | set); +} +static inline void r8152_mdio_write (struct r8152 *tp,u32 reg_addr,u32 value) {ocp_reg_write (tp,OCP_BASE_MII + reg_addr *2 , value);
@@ -1362,6 +1375,16 @@ static inline int r8152_mdio_read(struct r8152 *tp, u32 reg_addr)return ocp_reg_read (tp,OCP_BASE_MII + reg_addr *2 ); } +static void r8152_mdio_modify (struct r8152 *tp,u32 reg_addr,u16 clr,u16 set) +{ +u16 val, nval; + + val =r8152_mdio_read (tp, reg_addr); + nval = (val & ~clr) | set; +if (val != nval) +r8152_mdio_write (tp, reg_addr, nval); +} +static void sram_write (struct r8152 *tp,u16 addr,u16 data) {ocp_reg_write (tp,OCP_SRAM_ADDR , addr);
@@ -1374,6 +1397,11 @@ static u16 sram_read(struct r8152 *tp, u16 addr)return ocp_reg_read (tp,OCP_SRAM_DATA ); } +static void sram_modify (struct r8152 *tp,u16 addr,u16 clr,u16 set) +{ +sram_write (tp, addr, (sram_read (tp, addr) & ~clr) | set); +} +static int read_mii_word (struct net_device *netdev,int phy_id,int reg) {struct r8152 *tp =netdev_priv (netdev);
@@ -2552,9 +2580,7 @@ static void _rtl8152_set_rx_mode(struct net_device *netdev)u32 ocp_data;netif_stop_queue (netdev); - ocp_data =pla_ocp_read_dword (tp,PLA_RCR ); - ocp_data &= ~RCR_ACPT_ALL ; - ocp_data |=RCR_AB |RCR_APM ; + ocp_data =RCR_AB |RCR_APM ;if (netdev->flags &IFF_PROMISC ) {/* Unconditionally log net taps. */
@@ -2585,7 +2611,7 @@ static void _rtl8152_set_rx_mode(struct net_device *netdev) tmp[1 ] =__cpu_to_le32 (swab32 (mc_filter[0 ]));pla_ocp_write (tp,PLA_MAR ,BYTE_EN_DWORD ,sizeof (tmp), tmp); -pla_ocp_write_dword (tp,PLA_RCR , ocp_data); +pla_ocp_modify_dword (tp,PLA_RCR ,RCR_ACPT_ALL , ocp_data);netif_wake_queue (netdev); }
@@ -2631,13 +2657,8 @@ static netdev_tx_t rtl8152_start_xmit(struct sk_buff *skb,static void r8152b_reset_packet_filter (struct r8152 *tp) { -u32 ocp_data; - - ocp_data =pla_ocp_read_word (tp,PLA_FMC ); - ocp_data &= ~FMC_FCR_MCU_EN ; -pla_ocp_write_word (tp,PLA_FMC , ocp_data); - ocp_data |=FMC_FCR_MCU_EN ; -pla_ocp_write_word (tp,PLA_FMC , ocp_data); +pla_ocp_modify_word (tp,PLA_FMC ,FMC_FCR_MCU_EN ,0 ); +pla_ocp_modify_word (tp,PLA_FMC ,0 ,FMC_FCR_MCU_EN ); }static void rtl8152_nic_reset (struct r8152 *tp)
@@ -2668,31 +2689,17 @@ static inline u8 rtl8152_get_speed(struct r8152 *tp)static void rtl_set_eee_plus (struct r8152 *tp) { -u32 ocp_data;u8 speed; speed =rtl8152_get_speed (tp); -if (speed & _10bps) { - ocp_data =pla_ocp_read_word (tp,PLA_EEEP_CR ); - ocp_data |=EEEP_CR_EEEP_TX ; -pla_ocp_write_word (tp,PLA_EEEP_CR , ocp_data); - }else { - ocp_data =pla_ocp_read_word (tp,PLA_EEEP_CR ); - ocp_data &= ~EEEP_CR_EEEP_TX ; -pla_ocp_write_word (tp,PLA_EEEP_CR , ocp_data); - } +pla_ocp_modify_word (tp,PLA_EEEP_CR ,EEEP_CR_EEEP_TX , + (speed & _10bps) ?EEEP_CR_EEEP_TX :0 ); }static void rxdy_gated_en (struct r8152 *tp,bool enable) { -u32 ocp_data; - - ocp_data =pla_ocp_read_word (tp,PLA_MISC_1 ); -if (enable) - ocp_data |=RXDY_GATED_EN ; -else - ocp_data &= ~RXDY_GATED_EN ; -pla_ocp_write_word (tp,PLA_MISC_1 , ocp_data); +pla_ocp_modify_word (tp,PLA_MISC_1 ,RXDY_GATED_EN , + enable ?RXDY_GATED_EN :0 ); }static int rtl_start_rx (struct r8152 *tp)
@@ -2785,13 +2792,9 @@ static inline void r8153b_rx_agg_chg_indicate(struct r8152 *tp)static int rtl_enable (struct r8152 *tp) { -u32 ocp_data; -r8152b_reset_packet_filter (tp); - ocp_data =pla_ocp_read_byte (tp,PLA_CR ); - ocp_data |=CR_RE |CR_TE ; -pla_ocp_write_byte (tp,PLA_CR , ocp_data); +pla_ocp_modify_byte (tp,PLA_CR ,0 ,CR_RE |CR_TE );switch (tp->version) {case RTL_VER_08 :
@@ -2876,14 +2879,9 @@ static int rtl8153_enable(struct r8152 *tp)r8153_set_rx_early_size (tp);if (tp->version ==RTL_VER_09 ) { -u32 ocp_data; - - ocp_data =usb_ocp_read_word (tp,USB_FW_TASK ); - ocp_data &= ~FC_PATCH_TASK ; -usb_ocp_write_word (tp,USB_FW_TASK , ocp_data); +usb_ocp_modify_word (tp,USB_FW_TASK ,FC_PATCH_TASK ,0 );usleep_range (1000 ,2000 ); - ocp_data |=FC_PATCH_TASK ; -usb_ocp_write_word (tp,USB_FW_TASK , ocp_data); +usb_ocp_modify_word (tp,USB_FW_TASK ,0 ,FC_PATCH_TASK ); }return rtl_enable (tp);
@@ -2899,9 +2897,7 @@ static void rtl_disable(struct r8152 *tp)return ; } - ocp_data =pla_ocp_read_dword (tp,PLA_RCR ); - ocp_data &= ~RCR_ACPT_ALL ; -pla_ocp_write_dword (tp,PLA_RCR , ocp_data); +pla_ocp_modify_dword (tp,PLA_RCR ,RCR_ACPT_ALL ,0 );rtl_drop_queued_tx (tp);
@@ -2930,30 +2926,15 @@ static void rtl_disable(struct r8152 *tp)static void r8152_power_cut_en (struct r8152 *tp,bool enable) { -u32 ocp_data; - - ocp_data =usb_ocp_read_word (tp,USB_UPS_CTRL ); -if (enable) - ocp_data |=POWER_CUT ; -else - ocp_data &= ~POWER_CUT ; -usb_ocp_write_word (tp,USB_UPS_CTRL , ocp_data); - - ocp_data =usb_ocp_read_word (tp,USB_PM_CTRL_STATUS ); - ocp_data &= ~RESUME_INDICATE ; -usb_ocp_write_word (tp,USB_PM_CTRL_STATUS , ocp_data); +usb_ocp_modify_word (tp,USB_UPS_CTRL ,POWER_CUT , + enable ?POWER_CUT :0 ); +usb_ocp_modify_word (tp,USB_PM_CTRL_STATUS ,RESUME_INDICATE ,0 ); }static void rtl_rx_vlan_en (struct r8152 *tp,bool enable) { -u32 ocp_data; - - ocp_data =pla_ocp_read_word (tp,PLA_CPCR ); -if (enable) - ocp_data |=CPCR_RX_VLAN ; -else - ocp_data &= ~CPCR_RX_VLAN ; -pla_ocp_write_word (tp,PLA_CPCR , ocp_data); +pla_ocp_modify_word (tp,PLA_CPCR ,CPCR_RX_VLAN , + enable ?CPCR_RX_VLAN :0 ); } static int rtl8152_set_features(struct net_device *dev,
@@ -3012,33 +2993,20 @@ static u32 __rtl_get_wol(struct r8152 *tp)static void __rtl_set_wol (struct r8152 *tp,u32 wolopts) { -u32 ocp_data; -pla_ocp_write_byte (tp,PLA_CRWECR ,CRWECR_CONFIG ); - ocp_data =pla_ocp_read_word (tp,PLA_CONFIG34 ); - ocp_data &= ~LINK_ON_WAKE_EN ; -if (wolopts &WAKE_PHY ) - ocp_data |=LINK_ON_WAKE_EN ; -pla_ocp_write_word (tp,PLA_CONFIG34 , ocp_data); +pla_ocp_modify_word (tp,PLA_CONFIG34 ,LINK_ON_WAKE_EN , + wolopts &WAKE_PHY ?LINK_ON_WAKE_EN :0 ); - ocp_data =pla_ocp_read_word (tp,PLA_CONFIG5 ); - ocp_data &= ~(UWF_EN |BWF_EN |MWF_EN ); -if (wolopts &WAKE_UCAST ) - ocp_data |=UWF_EN ; -if (wolopts &WAKE_BCAST ) - ocp_data |=BWF_EN ; -if (wolopts &WAKE_MCAST ) - ocp_data |=MWF_EN ; -pla_ocp_write_word (tp,PLA_CONFIG5 , ocp_data); +pla_ocp_modify_word (tp,PLA_CONFIG5 ,UWF_EN |BWF_EN |MWF_EN , + (wolopts &WAKE_UCAST ?UWF_EN :0 ) | + (wolopts &WAKE_BCAST ?BWF_EN :0 ) | + (wolopts &WAKE_MCAST ?MWF_EN :0 ));pla_ocp_write_byte (tp,PLA_CRWECR ,CRWECR_NORAML ); - ocp_data =pla_ocp_read_word (tp,PLA_CFG_WOL ); - ocp_data &= ~MAGIC_EN ; -if (wolopts &WAKE_MAGIC ) - ocp_data |=MAGIC_EN ; -pla_ocp_write_word (tp,PLA_CFG_WOL , ocp_data); +pla_ocp_modify_word (tp,PLA_CFG_WOL ,MAGIC_EN , + wolopts &WAKE_MAGIC ?MAGIC_EN :0 );if (wolopts &WAKE_ANY )device_set_wakeup_enable (&tp->udev->dev, true);
@@ -3082,27 +3050,14 @@ static void r8153_u1u2en(struct r8152 *tp, bool enable)static void r8153b_u1u2en (struct r8152 *tp,bool enable) { -u32 ocp_data; - - ocp_data =usb_ocp_read_word (tp,USB_LPM_CONFIG ); -if (enable) - ocp_data |=LPM_U1U2_EN ; -else - ocp_data &= ~LPM_U1U2_EN ; - -usb_ocp_write_word (tp,USB_LPM_CONFIG , ocp_data); +usb_ocp_modify_word (tp,USB_LPM_CONFIG ,LPM_U1U2_EN , + enable ?LPM_U1U2_EN :0 ); }static void r8153_u2p3en (struct r8152 *tp,bool enable) { -u32 ocp_data; - - ocp_data =usb_ocp_read_word (tp,USB_U2P3_CTRL ); -if (enable) - ocp_data |=U2P3_ENABLE ; -else - ocp_data &= ~U2P3_ENABLE ; -usb_ocp_write_word (tp,USB_U2P3_CTRL , ocp_data); +usb_ocp_modify_word (tp,USB_U2P3_CTRL ,U2P3_ENABLE , + enable ?U2P3_ENABLE :0 ); }static void r8153b_ups_flags (struct r8152 *tp)
@@ -3179,8 +3134,6 @@ static void r8153b_ups_flags(struct r8152 *tp)static void r8153b_green_en (struct r8152 *tp,bool enable) { -u16 data; -if (enable) {sram_write (tp,0x8045 ,0 );/* 10M abiq&ldvbias */ sram_write (tp,0x804d ,0x1222 );/* 100M short abiq&ldvbias */
@@ -3191,9 +3144,7 @@ static void r8153b_green_en(struct r8152 *tp, bool enable)sram_write (tp,0x805d ,0x2444 );/* 1000M short abiq&ldvbias */ } - data =sram_read (tp,SRAM_GREEN_CFG ); - data |=GREEN_ETH_EN ; -sram_write (tp,SRAM_GREEN_CFG , data); +sram_modify (tp,SRAM_GREEN_CFG ,0 ,GREEN_ETH_EN ); tp->ups_info.green = enable; }
@@ -3224,43 +3175,27 @@ static u16 r8153_phy_status_wait(struct r8152 *tp, u16 desired)static void r8153b_ups_en (struct r8152 *tp,bool enable) { -u32 ocp_data =usb_ocp_read_byte (tp,USB_POWER_CUT ); - -if (enable) { +if (enable)r8153b_ups_flags (tp); - ocp_data |=UPS_EN |USP_PREWAKE |PHASE2_EN ; -usb_ocp_write_byte (tp,USB_POWER_CUT , ocp_data); +usb_ocp_modify_byte (tp,USB_POWER_CUT ,UPS_EN |USP_PREWAKE , + enable ?UPS_EN |USP_PREWAKE |PHASE2_EN :0 ); +usb_ocp_modify_byte (tp,0xcfff ,BIT (0 ), enable ?BIT (0 ) :0 ); - ocp_data =usb_ocp_read_byte (tp,0xcfff ); - ocp_data |=BIT (0 ); -usb_ocp_write_byte (tp,0xcfff , ocp_data); - }else { +if (!enable) {u16 data; - ocp_data &= ~(UPS_EN |USP_PREWAKE ); -usb_ocp_write_byte (tp,USB_POWER_CUT , ocp_data); - - ocp_data =usb_ocp_read_byte (tp,0xcfff ); - ocp_data &= ~BIT (0 ); -usb_ocp_write_byte (tp,0xcfff , ocp_data); - - ocp_data =usb_ocp_read_word (tp,USB_MISC_0 ); - ocp_data &= ~PCUT_STATUS ; -usb_ocp_write_word (tp,USB_MISC_0 , ocp_data); +usb_ocp_modify_word (tp,USB_MISC_0 ,PCUT_STATUS ,0 ); data =r8153_phy_status_wait (tp,0 );switch (data) {case PHY_STAT_PWRDN :case PHY_STAT_EXT_INIT : -r8153b_green_en (tp, -test_bit (GREEN_ETHERNET , &tp->flags)); +r8153b_green_en (tp,test_bit (GREEN_ETHERNET , + &tp->flags)); - data =r8152_mdio_read (tp,MII_BMCR ); - data &= ~BMCR_PDOWN ; - data |=BMCR_RESET ; -r8152_mdio_write (tp,MII_BMCR , data); +r8152_mdio_modify (tp,MII_BMCR ,BMCR_PDOWN ,BMCR_RESET ); data =r8153_phy_status_wait (tp,PHY_STAT_LAN_ON ); fallthrough;
@@ -3276,54 +3211,24 @@ static void r8153b_ups_en(struct r8152 *tp, bool enable)static void r8153_power_cut_en (struct r8152 *tp,bool enable) { -u32 ocp_data; - - ocp_data =usb_ocp_read_word (tp,USB_POWER_CUT ); -if (enable) - ocp_data |=PWR_EN |PHASE2_EN ; -else - ocp_data &= ~(PWR_EN |PHASE2_EN ); -usb_ocp_write_word (tp,USB_POWER_CUT , ocp_data); - - ocp_data =usb_ocp_read_word (tp,USB_MISC_0 ); - ocp_data &= ~PCUT_STATUS ; -usb_ocp_write_word (tp,USB_MISC_0 , ocp_data); +usb_ocp_modify_word (tp,USB_POWER_CUT ,PWR_EN |PHASE2_EN , + enable ?PWR_EN |PHASE2_EN :0 ); +usb_ocp_modify_word (tp,USB_MISC_0 ,PCUT_STATUS ,0 ); }static void r8153b_power_cut_en (struct r8152 *tp,bool enable) { -u32 ocp_data; - - ocp_data =usb_ocp_read_word (tp,USB_POWER_CUT ); -if (enable) - ocp_data |=PWR_EN |PHASE2_EN ; -else - ocp_data &= ~PWR_EN ; -usb_ocp_write_word (tp,USB_POWER_CUT , ocp_data); - - ocp_data =usb_ocp_read_word (tp,USB_MISC_0 ); - ocp_data &= ~PCUT_STATUS ; -usb_ocp_write_word (tp,USB_MISC_0 , ocp_data); +usb_ocp_modify_word (tp,USB_POWER_CUT ,PWR_EN , + enable ?PWR_EN |PHASE2_EN :0 ); +usb_ocp_modify_word (tp,USB_MISC_0 ,PCUT_STATUS ,0 ); }static void r8153_queue_wake (struct r8152 *tp,bool enable) { -u32 ocp_data; - - ocp_data =pla_ocp_read_byte (tp,PLA_INDICATE_FALG ); -if (enable) - ocp_data |=UPCOMING_RUNTIME_D3 ; -else - ocp_data &= ~UPCOMING_RUNTIME_D3 ; -pla_ocp_write_byte (tp,PLA_INDICATE_FALG , ocp_data); - - ocp_data =pla_ocp_read_byte (tp,PLA_SUSPEND_FLAG ); - ocp_data &= ~LINK_CHG_EVENT ; -pla_ocp_write_byte (tp,PLA_SUSPEND_FLAG , ocp_data); - - ocp_data =pla_ocp_read_word (tp,PLA_EXTRA_STATUS ); - ocp_data &= ~LINK_CHANGE_FLAG ; -pla_ocp_write_word (tp,PLA_EXTRA_STATUS , ocp_data); +pla_ocp_modify_byte (tp,PLA_INDICATE_FALG ,UPCOMING_RUNTIME_D3 , + enable ?UPCOMING_RUNTIME_D3 :0 ); +pla_ocp_modify_byte (tp,PLA_SUSPEND_FLAG ,LINK_CHG_EVENT ,0 ); +pla_ocp_modify_word (tp,PLA_EXTRA_STATUS ,LINK_CHANGE_FLAG ,0 ); }static bool rtl_can_wakeup (struct r8152 *tp)
@@ -3335,31 +3240,12 @@ static bool rtl_can_wakeup(struct r8152 *tp)static void rtl_runtime_suspend_enable (struct r8152 *tp,bool enable) { -if (enable) { -u32 ocp_data; - -__rtl_set_wol (tp,WAKE_ANY ); - -pla_ocp_write_byte (tp,PLA_CRWECR ,CRWECR_CONFIG ); - - ocp_data =pla_ocp_read_word (tp,PLA_CONFIG34 ); - ocp_data |=LINK_OFF_WAKE_EN ; -pla_ocp_write_word (tp,PLA_CONFIG34 , ocp_data); - -pla_ocp_write_byte (tp,PLA_CRWECR ,CRWECR_NORAML ); - }else { -u32 ocp_data; - -__rtl_set_wol (tp, tp->saved_wolopts); - -pla_ocp_write_byte (tp,PLA_CRWECR ,CRWECR_CONFIG ); +__rtl_set_wol (tp, enable ?WAKE_ANY : tp->saved_wolopts); - ocp_data =pla_ocp_read_word (tp,PLA_CONFIG34 ); - ocp_data &= ~LINK_OFF_WAKE_EN ; -pla_ocp_write_word (tp,PLA_CONFIG34 , ocp_data); - -pla_ocp_write_byte (tp,PLA_CRWECR ,CRWECR_NORAML ); - } +pla_ocp_write_byte (tp,PLA_CRWECR ,CRWECR_CONFIG ); +pla_ocp_modify_word (tp,PLA_CONFIG34 ,LINK_OFF_WAKE_EN , + enable ?LINK_OFF_WAKE_EN :0 ); +pla_ocp_write_byte (tp,PLA_CRWECR ,CRWECR_NORAML ); }static void rtl8153_runtime_enable (struct r8152 *tp,bool enable)
@@ -3407,8 +3293,6 @@ static void rtl8153b_runtime_enable(struct r8152 *tp, bool enable)static void r8153_teredo_off (struct r8152 *tp) { -u32 ocp_data; -switch (tp->version) {case RTL_VER_01 :case RTL_VER_02 :
@@ -3417,10 +3301,9 @@ static void r8153_teredo_off(struct r8152 *tp)case RTL_VER_05 :case RTL_VER_06 :case RTL_VER_07 : - ocp_data =pla_ocp_read_word (tp,PLA_TEREDO_CFG ); - ocp_data &= ~(TEREDO_SEL |TEREDO_RS_EVENT_MASK | -OOB_TEREDO_EN ); -pla_ocp_write_word (tp,PLA_TEREDO_CFG , ocp_data); +pla_ocp_modify_word (tp,PLA_TEREDO_CFG , +TEREDO_SEL |TEREDO_RS_EVENT_MASK | +OOB_TEREDO_EN ,0 );break ;case RTL_VER_08 :
@@ -3442,13 +3325,10 @@ static void r8153_teredo_off(struct r8152 *tp)static void rtl_reset_bmu (struct r8152 *tp) { -u32 ocp_data; +u8 bits =BMU_RESET_EP_IN |BMU_RESET_EP_OUT ; - ocp_data =usb_ocp_read_byte (tp,USB_BMU_RESET ); - ocp_data &= ~(BMU_RESET_EP_IN |BMU_RESET_EP_OUT ); -usb_ocp_write_byte (tp,USB_BMU_RESET , ocp_data); - ocp_data |=BMU_RESET_EP_IN |BMU_RESET_EP_OUT ; -usb_ocp_write_byte (tp,USB_BMU_RESET , ocp_data); +usb_ocp_modify_byte (tp,USB_BMU_RESET , bits,0 ); +usb_ocp_modify_byte (tp,USB_BMU_RESET ,0 , bits); }/* Clear the bp to stop the firmware before loading a new one */
@@ -3501,15 +3381,10 @@ static void rtl_clear_bp(struct r8152 *tp, u16 type)static int r8153_patch_request (struct r8152 *tp,bool request) { -u16 data;int i; - data =ocp_reg_read (tp,OCP_PHY_PATCH_CMD ); -if (request) - data |=PATCH_REQUEST ; -else - data &= ~PATCH_REQUEST ; -ocp_reg_write (tp,OCP_PHY_PATCH_CMD , data); +ocp_reg_modify (tp,OCP_PHY_PATCH_CMD ,PATCH_REQUEST , + request ?PATCH_REQUEST :0 );for (i =0 ; request && i <5000 ; i++) {usleep_range (1000 ,2000 );
@@ -3541,13 +3416,9 @@ static int r8153_pre_ram_code(struct r8152 *tp, u16 key_addr, u16 patch_key)static int r8153_post_ram_code (struct r8152 *tp,u16 key_addr) { -u16 data; -sram_write (tp,0x0000 ,0x0000 ); - data =ocp_reg_read (tp,OCP_PHY_LOCK ); - data &= ~PATCH_LOCK ; -ocp_reg_write (tp,OCP_PHY_LOCK , data); +ocp_reg_modify (tp,OCP_PHY_LOCK ,PATCH_LOCK ,0 );sram_write (tp, key_addr,0x0000 );
@@ -4202,22 +4073,9 @@ static void r8152_eee_en(struct r8152 *tp, bool enable)static void r8153_eee_en (struct r8152 *tp,bool enable) { -u32 ocp_data; -u16 config; - - ocp_data =pla_ocp_read_word (tp,PLA_EEE_CR ); - config =ocp_reg_read (tp,OCP_EEE_CFG ); - -if (enable) { - ocp_data |=EEE_RX_EN |EEE_TX_EN ; - config |=EEE10_EN ; - }else { - ocp_data &= ~(EEE_RX_EN |EEE_TX_EN ); - config &= ~EEE10_EN ; - } - -pla_ocp_write_word (tp,PLA_EEE_CR , ocp_data); -ocp_reg_write (tp,OCP_EEE_CFG , config); +pla_ocp_modify_word (tp,PLA_EEE_CR ,EEE_RX_EN |EEE_TX_EN , + enable ?EEE_RX_EN |EEE_TX_EN :0 ); +ocp_reg_modify (tp,OCP_EEE_CFG ,EEE10_EN , enable ?EEE10_EN :0 ); tp->ups_info.eee = enable; }
@@ -4258,11 +4116,8 @@ static void rtl_eee_enable(struct r8152 *tp, bool enable)static void r8152b_enable_fc (struct r8152 *tp) { -u16 anar; - - anar =r8152_mdio_read (tp,MII_ADVERTISE ); - anar |=ADVERTISE_PAUSE_CAP |ADVERTISE_PAUSE_ASYM ; -r8152_mdio_write (tp,MII_ADVERTISE , anar); +r8152_mdio_modify (tp,MII_ADVERTISE ,0 , +ADVERTISE_PAUSE_CAP |ADVERTISE_PAUSE_ASYM ); tp->ups_info.flow_control = true; }
@@ -4299,30 +4154,19 @@ static void wait_oob_link_list_ready(struct r8152 *tp)static void r8152b_exit_oob (struct r8152 *tp) { -u32 ocp_data; - - ocp_data =pla_ocp_read_dword (tp,PLA_RCR ); - ocp_data &= ~RCR_ACPT_ALL ; -pla_ocp_write_dword (tp,PLA_RCR , ocp_data); +pla_ocp_modify_dword (tp,PLA_RCR ,RCR_ACPT_ALL ,0 );rxdy_gated_en (tp, true);r8153_teredo_off (tp);pla_ocp_write_byte (tp,PLA_CRWECR ,CRWECR_NORAML );pla_ocp_write_byte (tp,PLA_CR ,0x00 ); - ocp_data =pla_ocp_read_byte (tp,PLA_OOB_CTRL ); - ocp_data &= ~NOW_IS_OOB ; -pla_ocp_write_byte (tp,PLA_OOB_CTRL , ocp_data); - - ocp_data =pla_ocp_read_word (tp,PLA_SFF_STS_7 ); - ocp_data &= ~MCU_BORW_EN ; -pla_ocp_write_word (tp,PLA_SFF_STS_7 , ocp_data); +pla_ocp_modify_byte (tp,PLA_OOB_CTRL ,NOW_IS_OOB ,0 ); +pla_ocp_modify_word (tp,PLA_SFF_STS_7 ,MCU_BORW_EN ,0 );wait_oob_link_list_ready (tp); - ocp_data =pla_ocp_read_word (tp,PLA_SFF_STS_7 ); - ocp_data |=RE_INIT_LL ; -pla_ocp_write_word (tp,PLA_SFF_STS_7 , ocp_data); +pla_ocp_modify_word (tp,PLA_SFF_STS_7 ,0 ,RE_INIT_LL );wait_oob_link_list_ready (tp);
@@ -4354,18 +4198,12 @@ static void r8152b_exit_oob(struct r8152 *tp)pla_ocp_write_word (tp,PLA_RMS ,RTL8152_RMS ); - ocp_data =pla_ocp_read_word (tp,PLA_TCR0 ); - ocp_data |=TCR0_AUTO_FIFO ; -pla_ocp_write_word (tp,PLA_TCR0 , ocp_data); +pla_ocp_modify_word (tp,PLA_TCR0 ,0 ,TCR0_AUTO_FIFO ); }static void r8152b_enter_oob (struct r8152 *tp) { -u32 ocp_data; - - ocp_data =pla_ocp_read_byte (tp,PLA_OOB_CTRL ); - ocp_data &= ~NOW_IS_OOB ; -pla_ocp_write_byte (tp,PLA_OOB_CTRL , ocp_data); +pla_ocp_modify_byte (tp,PLA_OOB_CTRL ,NOW_IS_OOB ,0 );pla_ocp_write_dword (tp,PLA_RXFIFO_CTRL0 ,RXFIFO_THR1_OOB );pla_ocp_write_dword (tp,PLA_RXFIFO_CTRL1 ,RXFIFO_THR2_OOB );
@@ -4375,9 +4213,7 @@ static void r8152b_enter_oob(struct r8152 *tp)wait_oob_link_list_ready (tp); - ocp_data =pla_ocp_read_word (tp,PLA_SFF_STS_7 ); - ocp_data |=RE_INIT_LL ; -pla_ocp_write_word (tp,PLA_SFF_STS_7 , ocp_data); +pla_ocp_modify_word (tp,PLA_SFF_STS_7 ,0 ,RE_INIT_LL );wait_oob_link_list_ready (tp);
@@ -4385,19 +4221,12 @@ static void r8152b_enter_oob(struct r8152 *tp)rtl_rx_vlan_en (tp, true); - ocp_data =pla_ocp_read_word (tp,PLA_BDC_CR ); - ocp_data |=ALDPS_PROXY_MODE ; -pla_ocp_write_word (tp,PLA_BDC_CR , ocp_data); - - ocp_data =pla_ocp_read_byte (tp,PLA_OOB_CTRL ); - ocp_data |=NOW_IS_OOB |DIS_MCU_CLROOB ; -pla_ocp_write_byte (tp,PLA_OOB_CTRL , ocp_data); +pla_ocp_modify_word (tp,PLA_BDC_CR ,0 ,ALDPS_PROXY_MODE ); +pla_ocp_modify_byte (tp,PLA_OOB_CTRL ,0 ,NOW_IS_OOB |DIS_MCU_CLROOB );rxdy_gated_en (tp, false); - ocp_data =pla_ocp_read_dword (tp,PLA_RCR ); - ocp_data |=RCR_APM |RCR_AM |RCR_AB ; -pla_ocp_write_dword (tp,PLA_RCR , ocp_data); +pla_ocp_modify_dword (tp,PLA_RCR ,0 ,RCR_APM |RCR_AM |RCR_AB ); }static int r8153_pre_firmware_1 (struct r8152 *tp)
@@ -4406,9 +4235,7 @@ static int r8153_pre_firmware_1(struct r8152 *tp)/* Wait till the WTD timer is ready. It would take at most 104 ms. */ for (i =0 ; i <104 ; i++) { -u32 ocp_data =usb_ocp_read_byte (tp,USB_WDT1_CTRL ); - -if (!(ocp_data &WTD1_EN )) +if (!(usb_ocp_read_byte (tp,USB_WDT1_CTRL ) &WTD1_EN ))break ;usleep_range (1000 ,2000 ); }
@@ -4430,56 +4257,34 @@ static int r8153_post_firmware_1(struct r8152 *tp)static int r8153_pre_firmware_2 (struct r8152 *tp) { -u32 ocp_data; -r8153_pre_firmware_1 (tp); - ocp_data =usb_ocp_read_word (tp,USB_FW_FIX_EN0 ); - ocp_data &= ~FW_FIX_SUSPEND ; -usb_ocp_write_word (tp,USB_FW_FIX_EN0 , ocp_data); +usb_ocp_modify_word (tp,USB_FW_FIX_EN0 ,FW_FIX_SUSPEND ,0 );return 0 ; }static int r8153_post_firmware_2 (struct r8152 *tp) { -u32 ocp_data; -/* enable bp0 if support USB_SPEED_SUPER only */ -if (usb_ocp_read_byte (tp,USB_CSTMR ) &FORCE_SUPER ) { - ocp_data =pla_ocp_read_word (tp,PLA_BP_EN ); - ocp_data |=BIT (0 ); -pla_ocp_write_word (tp,PLA_BP_EN , ocp_data); - } +if (usb_ocp_read_byte (tp,USB_CSTMR ) &FORCE_SUPER ) +pla_ocp_modify_word (tp,PLA_BP_EN ,0 ,BIT (0 ));/* reset UPHY timer to 36 ms */ pla_ocp_write_word (tp,PLA_UPHY_TIMER ,36000 /16 );/* enable U3P3 check, set the counter to 4 */ pla_ocp_write_word (tp,PLA_EXTRA_STATUS ,U3P3_CHECK_EN |4 ); - - ocp_data =usb_ocp_read_word (tp,USB_FW_FIX_EN0 ); - ocp_data |=FW_FIX_SUSPEND ; -usb_ocp_write_word (tp,USB_FW_FIX_EN0 , ocp_data); - - ocp_data =usb_ocp_read_byte (tp,USB_USB2PHY ); - ocp_data |=USB2PHY_L1 |USB2PHY_SUSPEND ; -usb_ocp_write_byte (tp,USB_USB2PHY , ocp_data); +usb_ocp_modify_word (tp,USB_FW_FIX_EN0 ,0 ,FW_FIX_SUSPEND ); +usb_ocp_modify_byte (tp,USB_USB2PHY ,0 ,USB2PHY_L1 |USB2PHY_SUSPEND );return 0 ; }static int r8153_post_firmware_3 (struct r8152 *tp) { -u32 ocp_data; - - ocp_data =usb_ocp_read_byte (tp,USB_USB2PHY ); - ocp_data |=USB2PHY_L1 |USB2PHY_SUSPEND ; -usb_ocp_write_byte (tp,USB_USB2PHY , ocp_data); - - ocp_data =usb_ocp_read_word (tp,USB_FW_FIX_EN1 ); - ocp_data |=FW_IP_RESET_EN ; -usb_ocp_write_word (tp,USB_FW_FIX_EN1 , ocp_data); +usb_ocp_modify_byte (tp,USB_USB2PHY ,0 ,USB2PHY_L1 |USB2PHY_SUSPEND ); +usb_ocp_modify_word (tp,USB_FW_FIX_EN1 ,0 ,FW_IP_RESET_EN );return 0 ; }
@@ -4494,44 +4299,24 @@ static int r8153b_pre_firmware_1(struct r8152 *tp)static int r8153b_post_firmware_1 (struct r8152 *tp) { -u32 ocp_data; -/* enable bp0 for RTL8153-BND */ - ocp_data =usb_ocp_read_byte (tp,USB_MISC_1 ); -if (ocp_data &BND_MASK ) { - ocp_data =pla_ocp_read_word (tp,PLA_BP_EN ); - ocp_data |=BIT (0 ); -pla_ocp_write_word (tp,PLA_BP_EN , ocp_data); - } - - ocp_data =usb_ocp_read_word (tp,USB_FW_CTRL ); - ocp_data |=FLOW_CTRL_PATCH_OPT ; -usb_ocp_write_word (tp,USB_FW_CTRL , ocp_data); +if (usb_ocp_read_byte (tp,USB_MISC_1 ) &BND_MASK ) +pla_ocp_modify_word (tp,PLA_BP_EN ,0 ,BIT (0 )); - ocp_data =usb_ocp_read_word (tp,USB_FW_TASK ); - ocp_data |=FC_PATCH_TASK ; -usb_ocp_write_word (tp,USB_FW_TASK , ocp_data); - - ocp_data =usb_ocp_read_word (tp,USB_FW_FIX_EN1 ); - ocp_data |=FW_IP_RESET_EN ; -usb_ocp_write_word (tp,USB_FW_FIX_EN1 , ocp_data); +usb_ocp_modify_word (tp,USB_FW_CTRL ,0 ,FLOW_CTRL_PATCH_OPT ); +usb_ocp_modify_word (tp,USB_FW_TASK ,0 ,FC_PATCH_TASK ); +usb_ocp_modify_word (tp,USB_FW_FIX_EN1 ,0 ,FW_IP_RESET_EN );return 0 ; }static void r8153_aldps_en (struct r8152 *tp,bool enable) { -u16 data; +ocp_reg_modify (tp,OCP_POWER_CFG ,EN_ALDPS , enable ?EN_ALDPS :0 ); - data =ocp_reg_read (tp,OCP_POWER_CFG ); -if (enable) { - data |=EN_ALDPS ; -ocp_reg_write (tp,OCP_POWER_CFG , data); - }else { +if (!enable) {int i; - data &= ~EN_ALDPS ; -ocp_reg_write (tp,OCP_POWER_CFG , data);for (i =0 ; i <20 ; i++) {usleep_range (1000 ,2000 );if (pla_ocp_read_word (tp,0xe000 ) &0x0100 )
@@ -4544,9 +4329,6 @@ static void r8153_aldps_en(struct r8152 *tp, bool enable)static void r8153_hw_phy_cfg (struct r8152 *tp) { -u32 ocp_data; -u16 data; -/* disable ALDPS before updating the PHY parameters */ r8153_aldps_en (tp, false);
@@ -4555,27 +4337,16 @@ static void r8153_hw_phy_cfg(struct r8152 *tp)rtl8152_apply_firmware (tp); -if (tp->version ==RTL_VER_03 ) { - data =ocp_reg_read (tp,OCP_EEE_CFG ); - data &= ~CTAP_SHORT_EN ; -ocp_reg_write (tp,OCP_EEE_CFG , data); - } +if (tp->version ==RTL_VER_03 ) +ocp_reg_modify (tp,OCP_EEE_CFG ,CTAP_SHORT_EN ,0 ); - data =ocp_reg_read (tp,OCP_POWER_CFG ); - data |=EEE_CLKDIV_EN ; -ocp_reg_write (tp,OCP_POWER_CFG , data); +ocp_reg_modify (tp,OCP_POWER_CFG ,0 ,EEE_CLKDIV_EN ); - data =ocp_reg_read (tp,OCP_DOWN_SPEED ); - data |=EN_10M_BGOFF ; -ocp_reg_write (tp,OCP_DOWN_SPEED , data); - data =ocp_reg_read (tp,OCP_POWER_CFG ); - data |=EN_10M_PLLOFF ; -ocp_reg_write (tp,OCP_POWER_CFG , data); +ocp_reg_modify (tp,OCP_DOWN_SPEED ,0 ,EN_10M_BGOFF ); +ocp_reg_modify (tp,OCP_POWER_CFG ,0 ,EN_10M_PLLOFF );sram_write (tp,SRAM_IMPEDANCE ,0x0b13 ); - ocp_data =pla_ocp_read_word (tp,PLA_PHY_PWR ); - ocp_data |=PFM_PWM_SWITCH ; -pla_ocp_write_word (tp,PLA_PHY_PWR , ocp_data); +pla_ocp_modify_word (tp,PLA_PHY_PWR ,0 ,PFM_PWM_SWITCH );/* Enable LPF corner auto tune */ sram_write (tp,SRAM_LPF_CFG ,0xf70f );
@@ -4618,8 +4389,7 @@ static u32 r8152_efuse_read(struct r8152 *tp, u8 addr)static void r8153b_hw_phy_cfg (struct r8152 *tp) { -u32 ocp_data; -u16 data; +u32 data;/* disable ALDPS before updating the PHY parameters */ r8153_aldps_en (tp, false);
@@ -4631,20 +4401,16 @@ static void r8153b_hw_phy_cfg(struct r8152 *tp)r8153b_green_en (tp,test_bit (GREEN_ETHERNET , &tp->flags)); - data =sram_read (tp,SRAM_GREEN_CFG ); - data |=R_TUNE_EN ; -sram_write (tp,SRAM_GREEN_CFG , data); - data =ocp_reg_read (tp,OCP_NCTL_CFG ); - data |=PGA_RETURN_EN ; -ocp_reg_write (tp,OCP_NCTL_CFG , data); +sram_modify (tp,SRAM_GREEN_CFG ,0 ,R_TUNE_EN ); +ocp_reg_modify (tp,OCP_NCTL_CFG ,0 ,PGA_RETURN_EN );/* ADC Bias Calibration: * read efuse offset 0x7d to get a 17-bit data. Remove the dummy/fake * bit (bit3) to rebuild the real 16-bit data. Write the data to the * ADC ioffset. */ - ocp_data =r8152_efuse_read (tp,0x7d ); - data = (u16)(((ocp_data &0x1fff0 ) >>1 ) | (ocp_data &0x7 )); + data =r8152_efuse_read (tp,0x7d ); + data = ((data &0x1fff0 ) >>1 ) | (data &0x7 );if (data !=0xffff )ocp_reg_write (tp,OCP_ADC_IOFFSET , data);
@@ -4652,31 +4418,20 @@ static void r8153b_hw_phy_cfg(struct r8152 *tp)* rg_saw_cnt = OCP reg 0xC426 Bit[13:0] * swr_cnt_1ms_ini = 16000000 / rg_saw_cnt */ - ocp_data =ocp_reg_read (tp,0xc426 ); - ocp_data &=0x3fff ; -if (ocp_data) { -u32 swr_cnt_1ms_ini; + data =ocp_reg_read (tp,0xc426 ) &0x3fff ; +if (data) +usb_ocp_modify_word (tp,USB_UPS_CFG ,SAW_CNT_1MS_MASK , + (16000000 / data) &SAW_CNT_1MS_MASK ); - swr_cnt_1ms_ini = (16000000 / ocp_data) &SAW_CNT_1MS_MASK ; - ocp_data =usb_ocp_read_word (tp,USB_UPS_CFG ); - ocp_data = (ocp_data & ~SAW_CNT_1MS_MASK ) | swr_cnt_1ms_ini; -usb_ocp_write_word (tp,USB_UPS_CFG , ocp_data); - } - - ocp_data =pla_ocp_read_word (tp,PLA_PHY_PWR ); - ocp_data |=PFM_PWM_SWITCH ; -pla_ocp_write_word (tp,PLA_PHY_PWR , ocp_data); +pla_ocp_modify_word (tp,PLA_PHY_PWR ,0 ,PFM_PWM_SWITCH );/* Advnace EEE */ if (!r8153_patch_request (tp, true)) { - data =ocp_reg_read (tp,OCP_POWER_CFG ); - data |=EEE_CLKDIV_EN ; -ocp_reg_write (tp,OCP_POWER_CFG , data); +ocp_reg_modify (tp,OCP_POWER_CFG ,0 ,EEE_CLKDIV_EN ); tp->ups_info.eee_ckdiv = true; - data =ocp_reg_read (tp,OCP_DOWN_SPEED ); - data |=EN_EEE_CMODE |EN_EEE_1000 |EN_10M_CLKDIV ; -ocp_reg_write (tp,OCP_DOWN_SPEED , data); +ocp_reg_modify (tp,OCP_DOWN_SPEED ,0 , +EN_EEE_CMODE |EN_EEE_1000 |EN_10M_CLKDIV ); tp->ups_info.eee_cmod_lv = true; tp->ups_info._10m_ckdiv = true; tp->ups_info.eee_plloff_giga = true;
@@ -4699,44 +4454,31 @@ static void r8153b_hw_phy_cfg(struct r8152 *tp)static void r8153_first_init (struct r8152 *tp) { -u32 ocp_data; -r8153_mac_clk_spd (tp, false);rxdy_gated_en (tp, true);r8153_teredo_off (tp); - ocp_data =pla_ocp_read_dword (tp,PLA_RCR ); - ocp_data &= ~RCR_ACPT_ALL ; -pla_ocp_write_dword (tp,PLA_RCR , ocp_data); +pla_ocp_modify_dword (tp,PLA_RCR ,RCR_ACPT_ALL ,0 );rtl8152_nic_reset (tp);rtl_reset_bmu (tp); - ocp_data =pla_ocp_read_byte (tp,PLA_OOB_CTRL ); - ocp_data &= ~NOW_IS_OOB ; -pla_ocp_write_byte (tp,PLA_OOB_CTRL , ocp_data); - - ocp_data =pla_ocp_read_word (tp,PLA_SFF_STS_7 ); - ocp_data &= ~MCU_BORW_EN ; -pla_ocp_write_word (tp,PLA_SFF_STS_7 , ocp_data); +pla_ocp_modify_byte (tp,PLA_OOB_CTRL ,NOW_IS_OOB ,0 ); +pla_ocp_modify_word (tp,PLA_SFF_STS_7 ,MCU_BORW_EN ,0 );wait_oob_link_list_ready (tp); - ocp_data =pla_ocp_read_word (tp,PLA_SFF_STS_7 ); - ocp_data |=RE_INIT_LL ; -pla_ocp_write_word (tp,PLA_SFF_STS_7 , ocp_data); +pla_ocp_modify_word (tp,PLA_SFF_STS_7 ,0 ,RE_INIT_LL );wait_oob_link_list_ready (tp);rtl_rx_vlan_en (tp, tp->netdev->features &NETIF_F_HW_VLAN_CTAG_RX ); - ocp_data = tp->netdev->mtu +VLAN_ETH_HLEN +ETH_FCS_LEN ; -pla_ocp_write_word (tp,PLA_RMS , ocp_data); +pla_ocp_write_word (tp,PLA_RMS , + tp->netdev->mtu +VLAN_ETH_HLEN +ETH_FCS_LEN );pla_ocp_write_byte (tp,PLA_MTPS ,MTPS_JUMBO ); - ocp_data =pla_ocp_read_word (tp,PLA_TCR0 ); - ocp_data |=TCR0_AUTO_FIFO ; -pla_ocp_write_word (tp,PLA_TCR0 , ocp_data); +pla_ocp_modify_word (tp,PLA_TCR0 ,0 ,TCR0_AUTO_FIFO );rtl8152_nic_reset (tp);
@@ -4750,36 +4492,28 @@ static void r8153_first_init(struct r8152 *tp)static void r8153_enter_oob (struct r8152 *tp) { -u32 ocp_data; -r8153_mac_clk_spd (tp, true); - ocp_data =pla_ocp_read_byte (tp,PLA_OOB_CTRL ); - ocp_data &= ~NOW_IS_OOB ; -pla_ocp_write_byte (tp,PLA_OOB_CTRL , ocp_data); +pla_ocp_modify_byte (tp,PLA_OOB_CTRL ,NOW_IS_OOB ,0 );rtl_disable (tp);rtl_reset_bmu (tp);wait_oob_link_list_ready (tp); - ocp_data =pla_ocp_read_word (tp,PLA_SFF_STS_7 ); - ocp_data |=RE_INIT_LL ; -pla_ocp_write_word (tp,PLA_SFF_STS_7 , ocp_data); +pla_ocp_modify_word (tp,PLA_SFF_STS_7 ,0 ,RE_INIT_LL );wait_oob_link_list_ready (tp); - ocp_data = tp->netdev->mtu +VLAN_ETH_HLEN +ETH_FCS_LEN ; -pla_ocp_write_word (tp,PLA_RMS , ocp_data); +pla_ocp_write_word (tp,PLA_RMS , + tp->netdev->mtu +VLAN_ETH_HLEN +ETH_FCS_LEN );switch (tp->version) {case RTL_VER_03 :case RTL_VER_04 :case RTL_VER_05 :case RTL_VER_06 : - ocp_data =pla_ocp_read_word (tp,PLA_TEREDO_CFG ); - ocp_data &= ~TEREDO_WAKE_MASK ; -pla_ocp_write_word (tp,PLA_TEREDO_CFG , ocp_data); +pla_ocp_modify_word (tp,PLA_TEREDO_CFG ,TEREDO_WAKE_MASK ,0 );break ;case RTL_VER_08 :
@@ -4797,19 +4531,12 @@ static void r8153_enter_oob(struct r8152 *tp)rtl_rx_vlan_en (tp, true); - ocp_data =pla_ocp_read_word (tp,PLA_BDC_CR ); - ocp_data |=ALDPS_PROXY_MODE ; -pla_ocp_write_word (tp,PLA_BDC_CR , ocp_data); - - ocp_data =pla_ocp_read_byte (tp,PLA_OOB_CTRL ); - ocp_data |=NOW_IS_OOB |DIS_MCU_CLROOB ; -pla_ocp_write_byte (tp,PLA_OOB_CTRL , ocp_data); +pla_ocp_modify_word (tp,PLA_BDC_CR ,0 ,ALDPS_PROXY_MODE ); +pla_ocp_modify_byte (tp,PLA_OOB_CTRL ,0 ,NOW_IS_OOB |DIS_MCU_CLROOB );rxdy_gated_en (tp, false); - ocp_data =pla_ocp_read_dword (tp,PLA_RCR ); - ocp_data |=RCR_APM |RCR_AM |RCR_AB ; -pla_ocp_write_dword (tp,PLA_RCR , ocp_data); +pla_ocp_modify_dword (tp,PLA_RCR ,0 ,RCR_APM |RCR_AM |RCR_AB ); }static void rtl8153_disable (struct r8152 *tp)
@@ -4868,7 +4595,7 @@ static int rtl8152_set_speed(struct r8152 *tp, u8 autoneg, u32 speed, u8 duplex, tp->mii.force_media =1 ; }else { -u16 anar, tmp1; +u16 anar =0 ;u32 support; support = RTL_ADVERTISED_10_HALF | RTL_ADVERTISED_10_FULL |
@@ -4880,46 +4607,42 @@ static int rtl8152_set_speed(struct r8152 *tp, u8 autoneg, u32 speed, u8 duplex,if (!(advertising & support))return -EINVAL ; - anar =r8152_mdio_read (tp,MII_ADVERTISE ); - tmp1 = anar & ~(ADVERTISE_10HALF |ADVERTISE_10FULL | -ADVERTISE_100HALF |ADVERTISE_100FULL );if (advertising &RTL_ADVERTISED_10_HALF ) { - tmp1 |=ADVERTISE_10HALF ; + anar |=ADVERTISE_10HALF ; tp->ups_info.speed_duplex =NWAY_10M_HALF ; }if (advertising &RTL_ADVERTISED_10_FULL ) { - tmp1 |=ADVERTISE_10FULL ; + anar |=ADVERTISE_10FULL ; tp->ups_info.speed_duplex =NWAY_10M_FULL ; }if (advertising &RTL_ADVERTISED_100_HALF ) { - tmp1 |=ADVERTISE_100HALF ; + anar |=ADVERTISE_100HALF ; tp->ups_info.speed_duplex =NWAY_100M_HALF ; }if (advertising &RTL_ADVERTISED_100_FULL ) { - tmp1 |=ADVERTISE_100FULL ; + anar |=ADVERTISE_100FULL ; tp->ups_info.speed_duplex =NWAY_100M_FULL ; } -if (anar != tmp1) { -r8152_mdio_write (tp,MII_ADVERTISE , tmp1); - tp->mii.advertising = tmp1; - } +r8152_mdio_modify (tp,MII_ADVERTISE , +ADVERTISE_10HALF |ADVERTISE_10FULL | +ADVERTISE_100HALF |ADVERTISE_100FULL , + anar); + tp->mii.advertising = anar;if (tp->mii.supports_gmii) { -u16 gbcr; - - gbcr =r8152_mdio_read (tp,MII_CTRL1000 ); - tmp1 = gbcr & ~(ADVERTISE_1000FULL | -ADVERTISE_1000HALF ); +u16 gbcr =0 ;if (advertising &RTL_ADVERTISED_1000_FULL ) { - tmp1 |=ADVERTISE_1000FULL ; + gbcr |=ADVERTISE_1000FULL ; tp->ups_info.speed_duplex =NWAY_1000M_FULL ; } -if (gbcr != tmp1) -r8152_mdio_write (tp,MII_CTRL1000 , tmp1); +r8152_mdio_modify (tp,MII_CTRL1000 , +ADVERTISE_1000FULL | +ADVERTISE_1000HALF , + gbcr); } bmcr =BMCR_ANENABLE |BMCR_ANRESTART ;
@@ -4971,8 +4694,6 @@ static void rtl8152_down(struct r8152 *tp)static void rtl8153_up (struct r8152 *tp) { -u32 ocp_data; -if (test_bit (RTL8152_UNPLUG , &tp->flags))return ;
@@ -4981,17 +4702,9 @@ static void rtl8153_up(struct r8152 *tp)r8153_aldps_en (tp, false);r8153_first_init (tp); - ocp_data =pla_ocp_read_byte (tp,PLA_CONFIG6 ); - ocp_data |=LANWAKE_CLR_EN ; -pla_ocp_write_byte (tp,PLA_CONFIG6 , ocp_data); - - ocp_data =pla_ocp_read_byte (tp,PLA_LWAKE_CTRL_REG ); - ocp_data &= ~LANWAKE_PIN ; -pla_ocp_write_byte (tp,PLA_LWAKE_CTRL_REG , ocp_data); - - ocp_data =usb_ocp_read_word (tp,USB_SSPHYLINK1 ); - ocp_data &= ~DELAY_PHY_PWR_CHG ; -usb_ocp_write_word (tp,USB_SSPHYLINK1 , ocp_data); +pla_ocp_modify_byte (tp,PLA_CONFIG6 ,0 ,LANWAKE_CLR_EN ); +pla_ocp_modify_byte (tp,PLA_LWAKE_CTRL_REG ,LANWAKE_PIN ,0 ); +usb_ocp_modify_word (tp,USB_SSPHYLINK1 ,DELAY_PHY_PWR_CHG ,0 );r8153_aldps_en (tp, true);
@@ -5011,16 +4724,12 @@ static void rtl8153_up(struct r8152 *tp)static void rtl8153_down (struct r8152 *tp) { -u32 ocp_data; -if (test_bit (RTL8152_UNPLUG , &tp->flags)) {rtl_drop_queued_tx (tp);return ; } - ocp_data =pla_ocp_read_byte (tp,PLA_CONFIG6 ); - ocp_data &= ~LANWAKE_CLR_EN ; -pla_ocp_write_byte (tp,PLA_CONFIG6 , ocp_data); +pla_ocp_modify_byte (tp,PLA_CONFIG6 ,LANWAKE_CLR_EN ,0 );r8153_u1u2en (tp, false);r8153_u2p3en (tp, false);
@@ -5032,8 +4741,6 @@ static void rtl8153_down(struct r8152 *tp)static void rtl8153b_up (struct r8152 *tp) { -u32 ocp_data; -if (test_bit (RTL8152_UNPLUG , &tp->flags))return ;
@@ -5044,9 +4751,7 @@ static void rtl8153b_up(struct r8152 *tp)r8153_first_init (tp);usb_ocp_write_dword (tp,USB_RX_BUF_TH ,RX_THR_B ); - ocp_data =pla_ocp_read_word (tp,PLA_MAC_PWR_CTRL3 ); - ocp_data &= ~PLA_MCU_SPDWN_EN ; -pla_ocp_write_word (tp,PLA_MAC_PWR_CTRL3 , ocp_data); +pla_ocp_modify_word (tp,PLA_MAC_PWR_CTRL3 ,PLA_MCU_SPDWN_EN ,0 );r8153_aldps_en (tp, true);
@@ -5056,16 +4761,12 @@ static void rtl8153b_up(struct r8152 *tp)static void rtl8153b_down (struct r8152 *tp) { -u32 ocp_data; -if (test_bit (RTL8152_UNPLUG , &tp->flags)) {rtl_drop_queued_tx (tp);return ; } - ocp_data =pla_ocp_read_word (tp,PLA_MAC_PWR_CTRL3 ); - ocp_data |=PLA_MCU_SPDWN_EN ; -pla_ocp_write_word (tp,PLA_MAC_PWR_CTRL3 , ocp_data); +pla_ocp_modify_word (tp,PLA_MAC_PWR_CTRL3 ,0 ,PLA_MCU_SPDWN_EN );r8153b_u1u2en (tp, false);r8153_u2p3en (tp, false);
@@ -5327,60 +5028,40 @@ static int rtl8152_close(struct net_device *netdev)static void rtl_tally_reset (struct r8152 *tp) { -u32 ocp_data; - - ocp_data =pla_ocp_read_word (tp,PLA_RSTTALLY ); - ocp_data |=TALLY_RESET ; -pla_ocp_write_word (tp,PLA_RSTTALLY , ocp_data); +pla_ocp_modify_word (tp,PLA_RSTTALLY ,0 ,TALLY_RESET ); }static void r8152b_init (struct r8152 *tp) { -u32 ocp_data; -u16 data; -if (test_bit (RTL8152_UNPLUG , &tp->flags))return ; - data =r8152_mdio_read (tp,MII_BMCR ); -if (data &BMCR_PDOWN ) { - data &= ~BMCR_PDOWN ; -r8152_mdio_write (tp,MII_BMCR , data); - } +r8152_mdio_modify (tp,MII_BMCR ,BMCR_PDOWN ,0 );r8152_aldps_en (tp, false); -if (tp->version ==RTL_VER_01 ) { - ocp_data =pla_ocp_read_word (tp,PLA_LED_FEATURE ); - ocp_data &= ~LED_MODE_MASK ; -pla_ocp_write_word (tp,PLA_LED_FEATURE , ocp_data); - } +if (tp->version ==RTL_VER_01 ) +pla_ocp_modify_word (tp,PLA_LED_FEATURE ,LED_MODE_MASK ,0 );r8152_power_cut_en (tp, false); - ocp_data =pla_ocp_read_word (tp,PLA_PHY_PWR ); - ocp_data |=TX_10M_IDLE_EN |PFM_PWM_SWITCH ; -pla_ocp_write_word (tp,PLA_PHY_PWR , ocp_data); - ocp_data =pla_ocp_read_dword (tp,PLA_MAC_PWR_CTRL ); - ocp_data &= ~MCU_CLK_RATIO_MASK ; - ocp_data |=MCU_CLK_RATIO |D3_CLK_GATED_EN ; -pla_ocp_write_dword (tp,PLA_MAC_PWR_CTRL , ocp_data); - ocp_data =GPHY_STS_MSK |SPEED_DOWN_MSK | -SPDWN_RXDV_MSK |SPDWN_LINKCHG_MSK ; -pla_ocp_write_word (tp,PLA_GPHY_INTR_IMR , ocp_data); +pla_ocp_modify_word (tp,PLA_PHY_PWR ,0 , +TX_10M_IDLE_EN |PFM_PWM_SWITCH ); +pla_ocp_modify_dword (tp,PLA_MAC_PWR_CTRL ,MCU_CLK_RATIO_MASK , +MCU_CLK_RATIO |D3_CLK_GATED_EN ); +pla_ocp_write_word (tp,PLA_GPHY_INTR_IMR , +GPHY_STS_MSK |SPEED_DOWN_MSK | +SPDWN_RXDV_MSK |SPDWN_LINKCHG_MSK );rtl_tally_reset (tp);/* enable rx aggregation */ - ocp_data =usb_ocp_read_word (tp,USB_USB_CTRL ); - ocp_data &= ~(RX_AGG_DISABLE |RX_ZERO_EN ); -usb_ocp_write_word (tp,USB_USB_CTRL , ocp_data); +usb_ocp_modify_word (tp,USB_USB_CTRL ,RX_AGG_DISABLE |RX_ZERO_EN ,0 ); }static void r8153_init (struct r8152 *tp) { -u32 ocp_data; -u16 data; +u32 set;int i;if (test_bit (RTL8152_UNPLUG , &tp->flags))
@@ -5397,84 +5078,54 @@ static void r8153_init(struct r8152 *tp)break ; } - data =r8153_phy_status_wait (tp,0 ); +r8153_phy_status_wait (tp,0 );if (tp->version ==RTL_VER_03 || tp->version ==RTL_VER_04 || tp->version ==RTL_VER_05 )ocp_reg_write (tp,OCP_ADC_CFG ,CKADSEL_L |ADC_EN |EN_EMI_L ); - data =r8152_mdio_read (tp,MII_BMCR ); -if (data &BMCR_PDOWN ) { - data &= ~BMCR_PDOWN ; -r8152_mdio_write (tp,MII_BMCR , data); - } +r8152_mdio_modify (tp,MII_BMCR ,BMCR_PDOWN ,0 ); - data =r8153_phy_status_wait (tp,PHY_STAT_LAN_ON ); +r8153_phy_status_wait (tp,PHY_STAT_LAN_ON );r8153_u2p3en (tp, false);if (tp->version ==RTL_VER_04 ) { - ocp_data =usb_ocp_read_word (tp,USB_SSPHYLINK2 ); - ocp_data &= ~pwd_dn_scale_mask; - ocp_data |=pwd_dn_scale (96 ); -usb_ocp_write_word (tp,USB_SSPHYLINK2 , ocp_data); - - ocp_data =usb_ocp_read_byte (tp,USB_USB2PHY ); - ocp_data |=USB2PHY_L1 |USB2PHY_SUSPEND ; -usb_ocp_write_byte (tp,USB_USB2PHY , ocp_data); +usb_ocp_modify_word (tp,USB_SSPHYLINK2 , pwd_dn_scale_mask, +pwd_dn_scale (96 )); +usb_ocp_modify_byte (tp,USB_USB2PHY ,0 , +USB2PHY_L1 |USB2PHY_SUSPEND ); }else if (tp->version ==RTL_VER_05 ) { - ocp_data =pla_ocp_read_byte (tp,PLA_DMY_REG0 ); - ocp_data &= ~ECM_ALDPS ; -pla_ocp_write_byte (tp,PLA_DMY_REG0 , ocp_data); +pla_ocp_modify_byte (tp,PLA_DMY_REG0 ,ECM_ALDPS ,0 ); - ocp_data =usb_ocp_read_byte (tp,USB_CSR_DUMMY1 ); -if (usb_ocp_read_word (tp,USB_BURST_SIZE ) ==0 ) - ocp_data &= ~DYNAMIC_BURST ; -else - ocp_data |=DYNAMIC_BURST ; -usb_ocp_write_byte (tp,USB_CSR_DUMMY1 , ocp_data); + set =usb_ocp_read_word (tp,USB_BURST_SIZE ) ?DYNAMIC_BURST :0 ; +usb_ocp_modify_byte (tp,USB_CSR_DUMMY1 ,DYNAMIC_BURST , set); }else if (tp->version ==RTL_VER_06 ) { - ocp_data =usb_ocp_read_byte (tp,USB_CSR_DUMMY1 ); -if (usb_ocp_read_word (tp,USB_BURST_SIZE ) ==0 ) - ocp_data &= ~DYNAMIC_BURST ; -else - ocp_data |=DYNAMIC_BURST ; -usb_ocp_write_byte (tp,USB_CSR_DUMMY1 , ocp_data); + set =usb_ocp_read_word (tp,USB_BURST_SIZE ) ?DYNAMIC_BURST :0 ; +usb_ocp_modify_byte (tp,USB_CSR_DUMMY1 ,DYNAMIC_BURST , set);r8153_queue_wake (tp, false); - ocp_data =pla_ocp_read_word (tp,PLA_EXTRA_STATUS ); + set =POLL_LINK_CHG ;if (rtl8152_get_speed (tp) &LINK_STATUS ) - ocp_data |=CUR_LINK_OK ; -else - ocp_data &= ~CUR_LINK_OK ; - ocp_data |=POLL_LINK_CHG ; -pla_ocp_write_word (tp,PLA_EXTRA_STATUS , ocp_data); + set |=CUR_LINK_OK ; +pla_ocp_modify_word (tp,PLA_EXTRA_STATUS ,CUR_LINK_OK , set); } - ocp_data =usb_ocp_read_byte (tp,USB_CSR_DUMMY2 ); - ocp_data |=EP4_FULL_FC ; -usb_ocp_write_byte (tp,USB_CSR_DUMMY2 , ocp_data); - - ocp_data =usb_ocp_read_word (tp,USB_WDT11_CTRL ); - ocp_data &= ~TIMER11_EN ; -usb_ocp_write_word (tp,USB_WDT11_CTRL , ocp_data); +usb_ocp_modify_byte (tp,USB_CSR_DUMMY2 ,0 ,EP4_FULL_FC ); +usb_ocp_modify_word (tp,USB_WDT11_CTRL ,TIMER11_EN ,0 ); - ocp_data =pla_ocp_read_word (tp,PLA_LED_FEATURE ); - ocp_data &= ~LED_MODE_MASK ; -pla_ocp_write_word (tp,PLA_LED_FEATURE , ocp_data); +pla_ocp_modify_word (tp,PLA_LED_FEATURE ,LED_MODE_MASK ,0 ); - ocp_data =FIFO_EMPTY_1FB |ROK_EXIT_LPM ; + set =FIFO_EMPTY_1FB |ROK_EXIT_LPM ;if (tp->version ==RTL_VER_04 && tp->udev->speed <USB_SPEED_SUPER ) - ocp_data |=LPM_TIMER_500MS ; + set |=LPM_TIMER_500MS ;else - ocp_data |=LPM_TIMER_500US ; -usb_ocp_write_byte (tp,USB_LPM_CTRL , ocp_data); + set |=LPM_TIMER_500US ; +usb_ocp_write_byte (tp,USB_LPM_CTRL , set); - ocp_data =usb_ocp_read_word (tp,USB_AFE_CTRL2 ); - ocp_data &= ~SEN_VAL_MASK ; - ocp_data |=SEN_VAL_NORMAL |SEL_RXIDLE ; -usb_ocp_write_word (tp,USB_AFE_CTRL2 , ocp_data); +usb_ocp_modify_word (tp,USB_AFE_CTRL2 ,SEN_VAL_MASK , +SEN_VAL_NORMAL |SEL_RXIDLE );usb_ocp_write_word (tp,USB_CONNECT_TIMER ,0x0001 );
@@ -5484,21 +5135,13 @@ static void r8153_init(struct r8152 *tp)r8153_mac_clk_spd (tp, false);usb_enable_lpm (tp->udev); - ocp_data =pla_ocp_read_byte (tp,PLA_CONFIG6 ); - ocp_data |=LANWAKE_CLR_EN ; -pla_ocp_write_byte (tp,PLA_CONFIG6 , ocp_data); - - ocp_data =pla_ocp_read_byte (tp,PLA_LWAKE_CTRL_REG ); - ocp_data &= ~LANWAKE_PIN ; -pla_ocp_write_byte (tp,PLA_LWAKE_CTRL_REG , ocp_data); +pla_ocp_modify_byte (tp,PLA_CONFIG6 ,0 ,LANWAKE_CLR_EN ); +pla_ocp_modify_byte (tp,PLA_LWAKE_CTRL_REG ,LANWAKE_PIN ,0 );/* rx aggregation */ - ocp_data =usb_ocp_read_word (tp,USB_USB_CTRL ); - ocp_data &= ~(RX_AGG_DISABLE |RX_ZERO_EN ); -if (test_bit (DELL_TB_RX_AGG_BUG , &tp->flags)) - ocp_data |=RX_AGG_DISABLE ; - -usb_ocp_write_word (tp,USB_USB_CTRL , ocp_data); +usb_ocp_modify_word (tp,USB_USB_CTRL ,RX_AGG_DISABLE |RX_ZERO_EN , +test_bit (DELL_TB_RX_AGG_BUG , &tp->flags) ? +RX_AGG_DISABLE :0 );rtl_tally_reset (tp);
@@ -5518,8 +5161,7 @@ static void r8153_init(struct r8152 *tp)static void r8153b_init (struct r8152 *tp) { -u32 ocp_data; -u16 data; +u32 set;int i;if (test_bit (RTL8152_UNPLUG , &tp->flags))
@@ -5536,15 +5178,11 @@ static void r8153b_init(struct r8152 *tp)break ; } - data =r8153_phy_status_wait (tp,0 ); +r8153_phy_status_wait (tp,0 ); - data =r8152_mdio_read (tp,MII_BMCR ); -if (data &BMCR_PDOWN ) { - data &= ~BMCR_PDOWN ; -r8152_mdio_write (tp,MII_BMCR , data); - } +r8152_mdio_modify (tp,MII_BMCR ,BMCR_PDOWN ,0 ); - data =r8153_phy_status_wait (tp,PHY_STAT_LAN_ON ); +r8153_phy_status_wait (tp,PHY_STAT_LAN_ON );r8153_u2p3en (tp, false);
@@ -5559,42 +5197,30 @@ static void r8153b_init(struct r8152 *tp)r8153_queue_wake (tp, false);rtl_runtime_suspend_enable (tp, false); - ocp_data =pla_ocp_read_word (tp,PLA_EXTRA_STATUS ); + set =POLL_LINK_CHG ;if (rtl8152_get_speed (tp) &LINK_STATUS ) - ocp_data |=CUR_LINK_OK ; -else - ocp_data &= ~CUR_LINK_OK ; - ocp_data |=POLL_LINK_CHG ; -pla_ocp_write_word (tp,PLA_EXTRA_STATUS , ocp_data); + set |=CUR_LINK_OK ; +pla_ocp_modify_word (tp,PLA_EXTRA_STATUS ,CUR_LINK_OK , set);if (tp->udev->speed !=USB_SPEED_HIGH )r8153b_u1u2en (tp, true);usb_enable_lpm (tp->udev);/* MAC clock speed down */ - ocp_data =pla_ocp_read_word (tp,PLA_MAC_PWR_CTRL2 ); - ocp_data |=MAC_CLK_SPDWN_EN ; -pla_ocp_write_word (tp,PLA_MAC_PWR_CTRL2 , ocp_data); +pla_ocp_modify_word (tp,PLA_MAC_PWR_CTRL2 ,0 ,MAC_CLK_SPDWN_EN ); - ocp_data =pla_ocp_read_word (tp,PLA_MAC_PWR_CTRL3 ); - ocp_data &= ~PLA_MCU_SPDWN_EN ; -pla_ocp_write_word (tp,PLA_MAC_PWR_CTRL3 , ocp_data); +pla_ocp_modify_word (tp,PLA_MAC_PWR_CTRL3 ,PLA_MCU_SPDWN_EN ,0 );if (tp->version ==RTL_VER_09 ) {/* Disable Test IO for 32QFN */ -if (pla_ocp_read_byte (tp,0xdc00 ) &BIT (5 )) { - ocp_data =pla_ocp_read_word (tp,PLA_PHY_PWR ); - ocp_data |=TEST_IO_OFF ; -pla_ocp_write_word (tp,PLA_PHY_PWR , ocp_data); - } +if (pla_ocp_read_byte (tp,0xdc00 ) &BIT (5 )) +pla_ocp_modify_word (tp,PLA_PHY_PWR ,0 ,TEST_IO_OFF ); }set_bit (GREEN_ETHERNET , &tp->flags);/* rx aggregation */ - ocp_data =usb_ocp_read_word (tp,USB_USB_CTRL ); - ocp_data &= ~(RX_AGG_DISABLE |RX_ZERO_EN ); -usb_ocp_write_word (tp,USB_USB_CTRL , ocp_data); +usb_ocp_modify_word (tp,USB_USB_CTRL ,RX_AGG_DISABLE |RX_ZERO_EN ,0 );rtl_tally_reset (tp);
@@ -6451,9 +6077,8 @@ static int rtl8152_change_mtu(struct net_device *dev, int new_mtu) dev->mtu = new_mtu;if (netif_running (dev)) { -u32 rms = new_mtu +VLAN_ETH_HLEN +ETH_FCS_LEN ; - -pla_ocp_write_word (tp,PLA_RMS , rms); +pla_ocp_write_word (tp,PLA_RMS , + new_mtu +VLAN_ETH_HLEN +ETH_FCS_LEN );if (netif_carrier_ok (dev))r8153_set_rx_early_size (tp);
Signature · 1 line
2.26.2