ASoC: rt1015: add delay to fix pop noise from speaker
Subsystems (4)
PATCH v2 1/1 ASoC: rt1015: add delay to fix pop noise from speaker
From: Jack Yu <[email protected]>
Add delay to fix pop noise from speaker.
Signed-off-by Jack Yu <[email protected]>
--- .../devicetree/bindings/sound/rt1015.txt | 6 ++++++ include/sound/rt1015.h | 15 ++++++++++++++ sound/soc/codecs/rt1015.c | 20 +++++++++++++++++++ sound/soc/codecs/rt1015.h | 2 ++ 4 files changed, 43 insertions(+) create mode 100644 include/sound/rt1015.h
Documentation/devicetree/bindings/sound/rt1015.txt +6 -0
@@ -8,10 +8,16 @@ Required properties: - reg : The I2C address of the device. +Optional properties: + +- realtek,realtek,power-up-delay-ms + Set a delay time for flush work to be completed, + this value is adjustable depending on platform. Example: rt1015: codec@28 { compatible = "realtek,rt1015"; reg = <0x28>; + realtek,power-up-delay-ms = <50>; };
include/sound/rt1015.h new file +15 -0
@@ -0,0 +1,15 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* +* linux/sound/rt1015.h -- Platform data for RT1015 +* +* Copyright 2020 Realtek Microelectronics +*/ + +#ifndef __LINUX_SND_RT1015_H +#define __LINUX_SND_RT1015_H + +struct rt1015_platform_data { +unsigned int power_up_delay_ms; +}; + +#endif
sound/soc/codecs/rt1015.c +20 -0
@@ -27,10 +27,15 @@#include <sound/soc-dapm.h> #include <sound/soc.h> #include <sound/tlv.h> +#include <sound/rt1015.h> #include "rl6231.h" #include "rt1015.h" +static const struct rt1015_platform_data i2s_default_platform_data = { + .power_up_delay_ms =50 , +}; +static const struct reg_default rt1015_reg[] = { {0x0000 ,0x0000 }, {0x0004 ,0xa000 },
@@ -650,6 +655,7 @@ static int rt1015_amp_drv_event(struct snd_soc_dapm_widget *w,case SND_SOC_DAPM_POST_PMU :if (rt1015->hw_config ==RT1015_HW_28 )schedule_delayed_work (&rt1015->flush_work,msecs_to_jiffies (10 )); +msleep (rt1015->pdata.power_up_delay_ms);break ;default :break ;
@@ -1067,9 +1073,16 @@ static struct acpi_device_id rt1015_acpi_match[] = {MODULE_DEVICE_TABLE (acpi, rt1015_acpi_match);#endif +static void rt1015_parse_dt (struct rt1015_priv *rt1015,struct device *dev) +{ +device_property_read_u32 (dev,"realtek,power-up-delay-ms" , + &rt1015->pdata.power_up_delay_ms); +} +static int rt1015_i2c_probe (struct i2c_client *i2c,const struct i2c_device_id *id) { +struct rt1015_platform_data *pdata =dev_get_platdata (&i2c->dev);struct rt1015_priv *rt1015;int ret;unsigned int val;
@@ -1081,6 +1094,13 @@ static int rt1015_i2c_probe(struct i2c_client *i2c,i2c_set_clientdata (i2c, rt1015); + rt1015->pdata = i2s_default_platform_data; + +if (pdata) + rt1015->pdata = *pdata; +else +rt1015_parse_dt (rt1015, &i2c->dev); + rt1015->regmap =devm_regmap_init_i2c (i2c, &rt1015_regmap);if (IS_ERR (rt1015->regmap)) { ret =PTR_ERR (rt1015->regmap);
sound/soc/codecs/rt1015.h +2 -0
@@ -12,6 +12,7 @@#ifndef __RT1015_H__#define __RT1015_H__ +#include <sound/rt1015.h> #define RT1015_DEVICE_ID_VAL 0x1011#define RT1015_DEVICE_ID_VAL2 0x1015
@@ -380,6 +381,7 @@ enum {struct rt1015_priv {struct snd_soc_component *component; +struct rt1015_platform_data pdata;struct regmap *regmap;int sysclk;int sysclk_src;
Signature · 1 line
2.28.0
Documentation/devicetree/bindings/sound/rt1015.txt Required properties: · line 13
Quoted 12 lines
Documentation/devicetree/bindings/sound/rt1015.txt +3
-0@@ -8,10 +8,16 @@ Required properties: - reg : The I2C address of the device. +Optional properties: + +- realtek,realtek,power-up-delay-ms
You missed one repetition here.
Quoted 10 lines
Documentation/devicetree/bindings/sound/rt1015.txt +3
-0+ Set a delay time for flush work to be completed, + this value is adjustable depending on platform. Example: rt1015: codec@28 { compatible = "realtek,rt1015"; reg = <0x28>; + realtek,power-up-delay-ms = <50>; };