Enhancements to Tegra194 PCIe driver
v3 cover Enhancements to Tegra194 PCIe driver
This series of patches do some enhancements and some bug fixes to the Tegra194 PCIe platform driver like
- Fix Vendor-ID corruption
- Map DBI space correctly
- Update DWC IP version
- Continue with uninitialization sequence even if parts fail
- Check return value of tegra_pcie_init_controller()
V3:
* Addressed Bjorn's review comments
* Split earlier patch-4 into two
- Continue with the uninitialization sequence even if some parts fail
- Check return value of tegra_pcie_init_controller() and exit accordingly
V2:
* Addressed Rob's comments. Changed 'Strongly Ordered' to 'nGnRnE'
Vidya Sagar (5):
PCI: tegra: Fix ASPM-L1SS advertisement disable code
PCI: tegra: Map configuration space as nGnRnE
PCI: tegra: Set DesignWare IP version
PCI: tegra: Continue unconfig sequence even if parts fail
PCI: tegra: Check return value of tegra_pcie_init_controller()
drivers/pci/controller/dwc/pcie-tegra194.c | 62 +++++++++++----------- 1 file changed, 30 insertions(+), 32 deletions(-)
Signature · 1 line
2.17.1
PATCH v3 1/5 PCI: tegra: Fix ASPM-L1SS advertisement disable code
If the absence of CLKREQ# signal is indicated by the absence of "supports-clkreq" in the device-tree node, current driver is disabling the advertisement of ASPM-L1 Sub-States *before* the ASPM-L1 Sub-States offset is correctly initialized. Since default value of the ASPM-L1SS offset is zero, this is causing the Vendor-ID wrongly programmed to 0x10d2 instead of Nvidia's 0x10de thereby the quirks applicable for Tegra194 are not being applied. This patch fixes this issue by refactoring the code that disables the ASPM-L1SS advertisement.
---
V3:
* None
V2:
* None
drivers/pci/controller/dwc/pcie-tegra194.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)
drivers/pci/controller/dwc/pcie-tegra194.c +6 -6
@@ -896,6 +896,12 @@ static void tegra_pcie_prepare_host(struct pcie_port *pp)init_host_aspm (pcie); +/* Disable ASPM-L1SS advertisement if there is no CLKREQ routing */ +if (!pcie->supports_clkreq) { +disable_aspm_l11 (pcie); +disable_aspm_l12 (pcie); + } + val =dw_pcie_readl_dbi (pci,GEN3_RELATED_OFF ); val &= ~GEN3_RELATED_OFF_GEN3_ZRXDC_NONCOMPL ;dw_pcie_writel_dbi (pci,GEN3_RELATED_OFF , val);
@@ -1400,12 +1406,6 @@ static int tegra_pcie_config_controller(struct tegra_pcie_dw *pcie, pcie->pcie_cap_base =dw_pcie_find_capability (&pcie->pci,PCI_CAP_ID_EXP ); -/* Disable ASPM-L1SS advertisement as there is no CLKREQ routing */ -if (!pcie->supports_clkreq) { -disable_aspm_l11 (pcie); -disable_aspm_l12 (pcie); - } -return ret; fail_phy:
Signature · 1 line
2.17.1
PATCH v3 2/5 PCI: tegra: Map configuration space as nGnRnE
In reply to Vidya SagarAs specified in the comment for pci_remap_cfgspace() define in arch/arm64/include/asm/io.h file, PCIe configuration space should be mapped as nGnRnE. Hence changing to dev_pci_remap_cfgspace() from devm_ioremap_resource() for mapping DBI space as that is nothing but the root port's own configuration space.
---
V3:
* None
V2:
* Changed 'Strongly Ordered' to 'nGnRnE'
drivers/pci/controller/dwc/pcie-tegra194.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/pci/controller/dwc/pcie-tegra194.c +3 -1
@@ -2108,7 +2108,9 @@ static int tegra_pcie_dw_probe(struct platform_device *pdev) } pcie->dbi_res = dbi_res; - pci->dbi_base =devm_ioremap_resource (dev, dbi_res); + pci->dbi_base =devm_pci_remap_cfgspace (dev, + dbi_res->start, +resource_size (dbi_res));if (IS_ERR (pci->dbi_base))return PTR_ERR (pci->dbi_base);
Signature · 1 line
2.17.1
PATCH v3 3/5 PCI: tegra: Set DesignWare IP version
In reply to Vidya SagarSet the DesignWare IP version for Tegra194 to 0x490A. This would be used by the DesigWare sub-system to do any version specific configuration (Ex:- TD bit programming for ECRC).
---
V3:
* None
V2:
* None
drivers/pci/controller/dwc/pcie-tegra194.c | 1 + 1 file changed, 1 insertion(+)
drivers/pci/controller/dwc/pcie-tegra194.c +1 -0
@@ -2011,6 +2011,7 @@ static int tegra_pcie_dw_probe(struct platform_device *pdev) pci->ops = &tegra_dw_pcie_ops; pci->n_fts[0 ] =N_FTS_VAL ; pci->n_fts[1 ] =FTS_VAL ; + pci->version =0x490A ; pp = &pci->pp; pcie->dev = &pdev->dev;
Signature · 1 line
2.17.1
PATCH v3 4/5 PCI: tegra: Continue unconfig sequence even if parts fail
In reply to Vidya SagarCurrently the driver checks for error value of different APIs during the uninitialization sequence. It just returns from there if there is any error observed for one of those calls. Comparatively it is better to continue the uninitialization sequence irrespective of whether some of them are returning error. That way, it is more closer to complete uninitialization.
---
V3:
* Modified subject as per Bjorn's suggestion
* Removed tegra_pcie_init_controller()'s error checking part and pushed a separate patch for it
V2:
* None
drivers/pci/controller/dwc/pcie-tegra194.c | 39 +++++++++------------- 1 file changed, 15 insertions(+), 24 deletions(-)
drivers/pci/controller/dwc/pcie-tegra194.c +15 -24
@@ -1422,43 +1422,32 @@ static int tegra_pcie_config_controller(struct tegra_pcie_dw *pcie,return ret; } -static int __deinit_controller (struct tegra_pcie_dw *pcie) +static void tegra_pcie_unconfig_controller (struct tegra_pcie_dw *pcie) {int ret; ret =reset_control_assert (pcie->core_rst); -if (ret) { -dev_err (pcie->dev,"Failed to assert \"core\" reset: %d\n" , - ret); -return ret; - } +if (ret) +dev_err (pcie->dev,"Failed to assert \"core\" reset: %d\n" , ret);tegra_pcie_disable_phy (pcie); ret =reset_control_assert (pcie->core_apb_rst); -if (ret) { +if (ret)dev_err (pcie->dev,"Failed to assert APB reset: %d\n" , ret); -return ret; - }clk_disable_unprepare (pcie->core_clk); ret =regulator_disable (pcie->pex_ctl_supply); -if (ret) { +if (ret)dev_err (pcie->dev,"Failed to disable regulator: %d\n" , ret); -return ret; - }tegra_pcie_disable_slot_regulators (pcie); ret =tegra_pcie_bpmp_set_ctrl_state (pcie, false); -if (ret) { +if (ret)dev_err (pcie->dev,"Failed to disable controller %d: %d\n" , pcie->cid, ret); -return ret; - } - -return ret; }static int tegra_pcie_init_controller (struct tegra_pcie_dw *pcie)
@@ -1482,7 +1471,8 @@ static int tegra_pcie_init_controller(struct tegra_pcie_dw *pcie)return 0 ; fail_host_init: -return __deinit_controller (pcie); +tegra_pcie_unconfig_controller (pcie); +return ret; }static int tegra_pcie_try_link_l2 (struct tegra_pcie_dw *pcie)
@@ -1551,13 +1541,12 @@ static void tegra_pcie_dw_pme_turnoff(struct tegra_pcie_dw *pcie)appl_writel (pcie, data,APPL_PINMUX ); } -static int tegra_pcie_deinit_controller (struct tegra_pcie_dw *pcie) +static void tegra_pcie_deinit_controller (struct tegra_pcie_dw *pcie) {tegra_pcie_downstream_dev_to_D0 (pcie);dw_pcie_host_deinit (&pcie->pci.pp);tegra_pcie_dw_pme_turnoff (pcie); - -return __deinit_controller (pcie); +tegra_pcie_unconfig_controller (pcie); }static int tegra_pcie_config_rp (struct tegra_pcie_dw *pcie)
@@ -2238,8 +2227,9 @@ static int tegra_pcie_dw_suspend_noirq(struct device *dev) PORT_LOGIC_MSI_CTRL_INT_0_EN);tegra_pcie_downstream_dev_to_D0 (pcie);tegra_pcie_dw_pme_turnoff (pcie); +tegra_pcie_unconfig_controller (pcie); -return __deinit_controller (pcie); +return 0 ; }static int tegra_pcie_dw_resume_noirq (struct device *dev)
@@ -2267,7 +2257,8 @@ static int tegra_pcie_dw_resume_noirq(struct device *dev)return 0 ; fail_host_init: -return __deinit_controller (pcie); +tegra_pcie_unconfig_controller (pcie); +return ret; }static int tegra_pcie_dw_resume_early (struct device *dev)
@@ -2305,7 +2296,7 @@ static void tegra_pcie_dw_shutdown(struct platform_device *pdev)disable_irq (pcie->pci.pp.msi_irq);tegra_pcie_dw_pme_turnoff (pcie); -__deinit_controller (pcie); +tegra_pcie_unconfig_controller (pcie); }static const struct tegra_pcie_dw_of_data tegra_pcie_dw_rc_of_data = {
Signature · 1 line
2.17.1
PATCH v3 5/5 PCI: tegra: Check return value of tegra_pcie_init_controller()
In reply to Vidya SagarThe return value of tegra_pcie_init_controller() must be checked before PCIe link up check and registering debugfs entries subsequently as it doesn't make sense to do these when the controller initialization itself has failed.
---
V3:
* New patch in this series
drivers/pci/controller/dwc/pcie-tegra194.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
drivers/pci/controller/dwc/pcie-tegra194.c +5 -1
@@ -1579,7 +1579,11 @@ static int tegra_pcie_config_rp(struct tegra_pcie_dw *pcie) goto fail_pm_get_sync; } -tegra_pcie_init_controller (pcie); + ret =tegra_pcie_init_controller (pcie); +if (ret <0 ) { +dev_err (dev,"Failed to initialize controller: %d\n" , ret); + goto fail_pm_get_sync; + } pcie->link_state =tegra_pcie_dw_link_up (&pcie->pci);if (!pcie->link_state) {
Signature · 1 line
2.17.1