Skip to contentSkip to conversation

fix parsing of reboot= cmdline

PATCH Applied Matteo Croce 2 participants 9 messages Nov 3, 2020 – Nov 6, 2020

lore
Share & tools
lore
#0 lore raw

v3 cover fix parsing of reboot= cmdline

From: Matteo Croce <[email protected]>

The parsing of the reboot= cmdline has two major errors:
- a missing bound check can crash the system on reboot
- parsing of the cpu number only works if specified last

Fix both, along with a small code refactor.

v2->v3:
Revert the offending commit first, then fix the other bug. CC stable
v1->v2:
As Petr suggested, don't force base 10 in simple_strtoul(), so hex values are accepted as well.

Matteo Croce (3):
Revert "kernel/reboot.c: convert simple_strtoul to kstrtoint"
reboot: fix overflow parsing reboot cpu number
reboot: refactor and comment the cpu selection code

 kernel/reboot.c | 30 +++++++++++++++++-------------
 1 file changed, 17 insertions(+), 13 deletions(-)
Signature · 1 line
2.28.0
#1 lore raw

PATCH v3 1/3 Revert "kernel/reboot.c: convert simple_strtoul to kstrtoint"

From: Matteo Croce <[email protected]>

This reverts commit 616feab753972b9751308f3cd2a68fc57eae8edb.

kstrtoint() and simple_strtoul() have a subtle difference which makes them non interchangeable: if a non digit character is found amid the parsing, the former will return an error, while the latter will just stop parsing, e.g. simple_strtoul("123xyx") = 123.

The kernel cmdline reboot= argument allows to specify the CPU used for rebooting, with the syntax s#### among the other flags, e.g. "reboot=warm,s31,force", so if this flag is not the last given, it's silently ignored as well as the subsequent ones.

Fixes 616feab75397 ("kernel/reboot.c: convert simple_strtoul to kstrtoint")
---
 kernel/reboot.c | 21 +++++++--------------
 1 file changed, 7 insertions(+), 14 deletions(-)
kernel/reboot.c +7 -14
index e7b78d5ae1ab..8fbba433725e 100644
@@ -551,22 +551,15 @@ static int __init reboot_setup(char *str)
 			break;
 
 		case 's':
-		{
-			int rc;
-
-			if (isdigit(*(str+1))) {
-				rc = kstrtoint(str+1, 0, &reboot_cpu);
-				if (rc)
-					return rc;
-			} else if (str[1] == 'm' && str[2] == 'p' &&
-				   isdigit(*(str+3))) {
-				rc = kstrtoint(str+3, 0, &reboot_cpu);
-				if (rc)
-					return rc;
-			} else
+			if (isdigit(*(str+1)))
+				reboot_cpu = simple_strtoul(str+1, NULL, 0);
+			else if (str[1] == 'm' && str[2] == 'p' &&
+							isdigit(*(str+3)))
+				reboot_cpu = simple_strtoul(str+3, NULL, 0);
+			else
 				*mode = REBOOT_SOFT;
 			break;
-		}
+
 		case 'g':
 			*mode = REBOOT_GPIO;
 			break;
Signature · 1 line
2.28.0
Reviewed-by on v3 1/3
#2 lore raw

Re: [PATCH v3 1/3] Revert "kernel/reboot.c: convert simple_strtoul to kstrtoint"

Quoted 9 lines · Matteo Croce

From: Matteo Croce <[email protected]>

This reverts commit 616feab753972b9751308f3cd2a68fc57eae8edb.

kstrtoint() and simple_strtoul() have a subtle difference which makes them non interchangeable: if a non digit character is found amid the parsing, the former will return an error, while the latter will just stop parsing, e.g. simple_strtoul("123xyx") = 123.

Quoted 8 lines

The kernel cmdline reboot= argument allows to specify the CPU used for rebooting, with the syntax s#### among the other flags, e.g. "reboot=warm,s31,force", so if this flag is not the last given, it's silently ignored as well as the subsequent ones.

Fixes 616feab75397 ("kernel/reboot.c: convert simple_strtoul to kstrtoint")

Best Regards,
Petr

#3 lore raw

PATCH v3 2/3 reboot: fix overflow parsing reboot cpu number

In reply to Matteo Croce

From: Matteo Croce <[email protected]>

Limit the CPU number to num_possible_cpus(), because setting it to a value lower than INT_MAX but higher than NR_CPUS produces the following error on reboot and shutdown:

    BUG: unable to handle page fault for address: ffffffff90ab1bb0
    #PF: supervisor read access in kernel mode
    #PF: error_code(0x0000) - not-present page
    PGD 1c09067 P4D 1c09067 PUD 1c0a063 PMD 0
    Oops: 0000 [#1] SMP
    CPU: 1 PID: 1 Comm: systemd-shutdow Not tainted 5.9.0-rc8-kvm #110
    Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014
    RIP: 0010:migrate_to_reboot_cpu+0xe/0x60
    Code: ea ea 00 48 89 fa 48 c7 c7 30 57 f1 81 e9 fa ef ff ff 66 2e 0f 1f 84 00 00 00 00 00 53 8b 1d d5 ea ea 00 e8 14 33 fe ff 89 da <48> 0f a3 15 ea fc bd 00 48 89 d0 73 29 89 c2 c1 e8 06 65 48 8b 3c
    RSP: 0018:ffffc90000013e08 EFLAGS: 00010246
    RAX: ffff88801f0a0000 RBX: 0000000077359400 RCX: 0000000000000000
    RDX: 0000000077359400 RSI: 0000000000000002 RDI: ffffffff81c199e0
    RBP: ffffffff81c1e3c0 R08: ffff88801f41f000 R09: ffffffff81c1e348
    R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
    R13: 00007f32bedf8830 R14: 00000000fee1dead R15: 0000000000000000
    FS:  00007f32bedf8980(0000) GS:ffff88801f480000(0000) knlGS:0000000000000000
    CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
    CR2: ffffffff90ab1bb0 CR3: 000000001d057000 CR4: 00000000000006a0
    DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
    DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
    Call Trace:
    __do_sys_reboot.cold+0x34/0x5b
    ? vfs_writev+0x92/0xc0
    ? do_writev+0x52/0xd0
    do_syscall_64+0x2d/0x40
    entry_SYSCALL_64_after_hwframe+0x44/0xa9
    RIP: 0033:0x7f32bfaaecd3
    Code: 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 89 fa be 69 19 12 28 bf ad de e1 fe b8 a9 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 05 c3 0f 1f 40 00 48 8b 15 89 81 0c 00 f7 d8
    RSP: 002b:00007fff6265fb58 EFLAGS: 00000202 ORIG_RAX: 00000000000000a9
    RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f32bfaaecd3
    RDX: 0000000001234567 RSI: 0000000028121969 RDI: 00000000fee1dead
    RBP: 0000000000000000 R08: 0000000000008020 R09: 00007fff6265ef60
    R10: 00007f32bedf8830 R11: 0000000000000202 R12: 0000000000000000
    R13: 0000557bba2c51c0 R14: 0000000000000000 R15: 00007fff6265fbc8
    CR2: ffffffff90ab1bb0
    ---[ end trace b813e80157136563 ]---
    RIP: 0010:migrate_to_reboot_cpu+0xe/0x60
    Code: ea ea 00 48 89 fa 48 c7 c7 30 57 f1 81 e9 fa ef ff ff 66 2e 0f 1f 84 00 00 00 00 00 53 8b 1d d5 ea ea 00 e8 14 33 fe ff 89 da <48> 0f a3 15 ea fc bd 00 48 89 d0 73 29 89 c2 c1 e8 06 65 48 8b 3c
    RSP: 0018:ffffc90000013e08 EFLAGS: 00010246
    RAX: ffff88801f0a0000 RBX: 0000000077359400 RCX: 0000000000000000
    RDX: 0000000077359400 RSI: 0000000000000002 RDI: ffffffff81c199e0
    RBP: ffffffff81c1e3c0 R08: ffff88801f41f000 R09: ffffffff81c1e348
    R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
    R13: 00007f32bedf8830 R14: 00000000fee1dead R15: 0000000000000000
    FS:  00007f32bedf8980(0000) GS:ffff88801f480000(0000) knlGS:0000000000000000
    CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
    CR2: ffffffff90ab1bb0 CR3: 000000001d057000 CR4: 00000000000006a0
    DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
    DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
    Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009
    Kernel Offset: disabled
    ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009 ]---
Fixes 1b3a5d02ee07 ("reboot: move arch/x86 reboot= handling to generic kernel")
---
 kernel/reboot.c | 7 +++++++
 1 file changed, 7 insertions(+)
kernel/reboot.c +7 -0
index 8fbba433725e..af6f23d8bea1 100644
@@ -558,6 +558,13 @@ static int __init reboot_setup(char *str)
 				reboot_cpu = simple_strtoul(str+3, NULL, 0);
 			else
 				*mode = REBOOT_SOFT;
+			if (reboot_cpu >= num_possible_cpus()) {
+				pr_err("Ignoring the CPU number in reboot= option. "
+				       "CPU %d exceeds possible cpu number %d\n",
+				       reboot_cpu, num_possible_cpus());
+				reboot_cpu = 0;
+				break;
+			}
 			break;
 
 		case 'g':
Signature · 1 line
2.28.0
Reviewed-by on v3 2/3
#4 lore raw

Re: [PATCH v3 2/3] reboot: fix overflow parsing reboot cpu number

Quoted 71 lines · Matteo Croce

From: Matteo Croce <[email protected]>

Limit the CPU number to num_possible_cpus(), because setting it to a value lower than INT_MAX but higher than NR_CPUS produces the following error on reboot and shutdown:

    BUG: unable to handle page fault for address: ffffffff90ab1bb0
    #PF: supervisor read access in kernel mode
    #PF: error_code(0x0000) - not-present page
    PGD 1c09067 P4D 1c09067 PUD 1c0a063 PMD 0
    Oops: 0000 [#1] SMP
    CPU: 1 PID: 1 Comm: systemd-shutdow Not tainted 5.9.0-rc8-kvm #110
    Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014
    RIP: 0010:migrate_to_reboot_cpu+0xe/0x60
    Code: ea ea 00 48 89 fa 48 c7 c7 30 57 f1 81 e9 fa ef ff ff 66 2e 0f 1f 84 00 00 00 00 00 53 8b 1d d5 ea ea 00 e8 14 33 fe ff 89 da <48> 0f a3 15 ea fc bd 00 48 89 d0 73 29 89 c2 c1 e8 06 65 48 8b 3c
    RSP: 0018:ffffc90000013e08 EFLAGS: 00010246
    RAX: ffff88801f0a0000 RBX: 0000000077359400 RCX: 0000000000000000
    RDX: 0000000077359400 RSI: 0000000000000002 RDI: ffffffff81c199e0
    RBP: ffffffff81c1e3c0 R08: ffff88801f41f000 R09: ffffffff81c1e348
    R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
    R13: 00007f32bedf8830 R14: 00000000fee1dead R15: 0000000000000000
    FS:  00007f32bedf8980(0000) GS:ffff88801f480000(0000) knlGS:0000000000000000
    CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
    CR2: ffffffff90ab1bb0 CR3: 000000001d057000 CR4: 00000000000006a0
    DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
    DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
    Call Trace:
    __do_sys_reboot.cold+0x34/0x5b
    ? vfs_writev+0x92/0xc0
    ? do_writev+0x52/0xd0
    do_syscall_64+0x2d/0x40
    entry_SYSCALL_64_after_hwframe+0x44/0xa9
    RIP: 0033:0x7f32bfaaecd3
    Code: 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 89 fa be 69 19 12 28 bf ad de e1 fe b8 a9 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 05 c3 0f 1f 40 00 48 8b 15 89 81 0c 00 f7 d8
    RSP: 002b:00007fff6265fb58 EFLAGS: 00000202 ORIG_RAX: 00000000000000a9
    RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f32bfaaecd3
    RDX: 0000000001234567 RSI: 0000000028121969 RDI: 00000000fee1dead
    RBP: 0000000000000000 R08: 0000000000008020 R09: 00007fff6265ef60
    R10: 00007f32bedf8830 R11: 0000000000000202 R12: 0000000000000000
    R13: 0000557bba2c51c0 R14: 0000000000000000 R15: 00007fff6265fbc8
    CR2: ffffffff90ab1bb0
    ---[ end trace b813e80157136563 ]---
    RIP: 0010:migrate_to_reboot_cpu+0xe/0x60
    Code: ea ea 00 48 89 fa 48 c7 c7 30 57 f1 81 e9 fa ef ff ff 66 2e 0f 1f 84 00 00 00 00 00 53 8b 1d d5 ea ea 00 e8 14 33 fe ff 89 da <48> 0f a3 15 ea fc bd 00 48 89 d0 73 29 89 c2 c1 e8 06 65 48 8b 3c
    RSP: 0018:ffffc90000013e08 EFLAGS: 00010246
    RAX: ffff88801f0a0000 RBX: 0000000077359400 RCX: 0000000000000000
    RDX: 0000000077359400 RSI: 0000000000000002 RDI: ffffffff81c199e0
    RBP: ffffffff81c1e3c0 R08: ffff88801f41f000 R09: ffffffff81c1e348
    R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
    R13: 00007f32bedf8830 R14: 00000000fee1dead R15: 0000000000000000
    FS:  00007f32bedf8980(0000) GS:ffff88801f480000(0000) knlGS:0000000000000000
    CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
    CR2: ffffffff90ab1bb0 CR3: 000000001d057000 CR4: 00000000000006a0
    DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
    DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
    Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009
    Kernel Offset: disabled
    ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009 ]---
Fixes 1b3a5d02ee07 ("reboot: move arch/x86 reboot= handling to generic kernel")
---
 kernel/reboot.c | 7 +++++++
 1 file changed, 7 insertions(+)
kernel/reboot.c +0 -0
index 8fbba433725e..af6f23d8bea1 100644

kernel/reboot.c static int __init reboot_setup(char *str) · line 563

Quoted 6 lines
kernel/reboot.c +3 -0
@@ -558,6 +558,13 @@ static int __init reboot_setup(char *str)
 				reboot_cpu = simple_strtoul(str+3, NULL, 0);
 			else
 				*mode = REBOOT_SOFT;
+			if (reboot_cpu >= num_possible_cpus()) {
+				pr_err("Ignoring the CPU number in reboot= option. "
+				       "CPU %d exceeds possible cpu number %d\n",

./scripts/checkpatch.pl used to complain that printk() format parameter should stay on a single line (ignoring 80 char limit). It helps when people are trying to find which code printed a particular message.

It is not a big deal here because %d does not allow to search the entire message anyway.

I am not sure if Andrew would like to get this fixed. In both cases:

Best Regards,
Petr

#5 lore raw

Re: [PATCH v3 2/3] reboot: fix overflow parsing reboot cpu number

Quoted 8 lines · Petr Mladek

kernel/reboot.c static int __init reboot_setup(char *str) · line 563

Quoted 3 lines
kernel/reboot.c +3 -0
+                     if (reboot_cpu >= num_possible_cpus()) {
+                             pr_err("Ignoring the CPU number in reboot= option. "
+                                    "CPU %d exceeds possible cpu number %d\n",

./scripts/checkpatch.pl used to complain that printk() format parameter should stay on a single line (ignoring 80 char limit). It helps when people are trying to find which code printed a particular message.

Quoted 7 lines

It is not a big deal here because %d does not allow to search the entire message anyway.

I am not sure if Andrew would like to get this fixed. In both cases:

Yes, I saw this warning, but to suppress it I had to write a 133 char line, much beyond even the new 100 char limit.
I expect a smart user to just grep the first half of the string, like "Ignoring the CPU number in reboot="

Regards,

Signature · 1 line
per aspera ad upstream
#6 lore raw

Re: [PATCH v3 2/3] reboot: fix overflow parsing reboot cpu number

Quoted 14 lines · Matteo Croce
Quoted 13 lines · Petr Mladek

kernel/reboot.c static int __init reboot_setup(char *str) · line 563

Quoted 3 lines
kernel/reboot.c +3 -0
+                     if (reboot_cpu >= num_possible_cpus()) {
+                             pr_err("Ignoring the CPU number in reboot= option. "
+                                    "CPU %d exceeds possible cpu number %d\n",

./scripts/checkpatch.pl used to complain that printk() format parameter should stay on a single line (ignoring 80 char limit). It helps when people are trying to find which code printed a particular message.

It is not a big deal here because %d does not allow to search the entire message anyway.

I am not sure if Andrew would like to get this fixed. In both cases:

Quoted 7 lines
Quoted 2 lines

Yes, I saw this warning, but to suppress it I had to write a 133 char line, much beyond even the new 100 char limit.
I expect a smart user to just grep the first half of the string, like "Ignoring the CPU number in reboot="

I agree with checkpatch in this case. IMHO, the more reliable way to grep the string is more important than the 80 or 100 chars per-line.

That said, it is not a big deal in this case because of the %d. It requires to search only part of the string anyway.

I am perfectly fine with keeping it as is.

Best Regards,
Petr

#7 lore raw

PATCH v3 3/3 reboot: refactor and comment the cpu selection code

In reply to Matteo Croce

From: Matteo Croce <[email protected]>

Small improvements to the code, without changing the way it works:
- use a local variable, to avoid a small time lapse where reboot_cpu can have an invalid value
- comment the code which is not easy to understand at a glance
- merge two identical code blocks into one
- replace pointer arithmetics with equivalent array syntax

---
 kernel/reboot.c | 30 +++++++++++++++++-------------
 1 file changed, 17 insertions(+), 13 deletions(-)
kernel/reboot.c +17 -13
index af6f23d8bea1..dd483bde932b 100644
@@ -551,20 +551,24 @@ static int __init reboot_setup(char *str)
 			break;
 
 		case 's':
-			if (isdigit(*(str+1)))
-				reboot_cpu = simple_strtoul(str+1, NULL, 0);
-			else if (str[1] == 'm' && str[2] == 'p' &&
-							isdigit(*(str+3)))
-				reboot_cpu = simple_strtoul(str+3, NULL, 0);
-			else
+			/*
+			 * reboot_cpu is s[mp]#### with #### being the processor
+			 * to be used for rebooting. Skip 's' or 'smp' prefix.
+			 */
+			str += str[1] == 'm' && str[2] == 'p' ? 3 : 1;
+
+			if (isdigit(str[0])) {
+				int cpu = simple_strtoul(str, NULL, 0);
+
+				if (cpu >= num_possible_cpus()) {
+					pr_err("Ignoring the CPU number in reboot= option. "
+					"CPU %d exceeds possible cpu number %d\n",
+					cpu, num_possible_cpus());
+					break;
+				}
+				reboot_cpu = cpu;
+			} else
 				*mode = REBOOT_SOFT;
-			if (reboot_cpu >= num_possible_cpus()) {
-				pr_err("Ignoring the CPU number in reboot= option. "
-				       "CPU %d exceeds possible cpu number %d\n",
-				       reboot_cpu, num_possible_cpus());
-				reboot_cpu = 0;
-				break;
-			}
 			break;
 
 		case 'g':
Signature · 1 line
2.28.0
Reviewed-by on v3 3/3
#8 lore raw

Re: [PATCH v3 3/3] reboot: refactor and comment the cpu selection code

Quoted 30 lines · Matteo Croce

From: Matteo Croce <[email protected]>

Small improvements to the code, without changing the way it works:
- use a local variable, to avoid a small time lapse where reboot_cpu can have an invalid value
- comment the code which is not easy to understand at a glance
- merge two identical code blocks into one
- replace pointer arithmetics with equivalent array syntax

---
 kernel/reboot.c | 30 +++++++++++++++++-------------
 1 file changed, 17 insertions(+), 13 deletions(-)
kernel/reboot.c +2 -6
index af6f23d8bea1..dd483bde932b 100644
@@ -551,20 +551,24 @@ static int __init reboot_setup(char *str)
 			break;
 
 		case 's':
-			if (isdigit(*(str+1)))
-				reboot_cpu = simple_strtoul(str+1, NULL, 0);
-			else if (str[1] == 'm' && str[2] == 'p' &&
-							isdigit(*(str+3)))
-				reboot_cpu = simple_strtoul(str+3, NULL, 0);
-			else
+			/*
+			 * reboot_cpu is s[mp]#### with #### being the processor

kernel/reboot.c static int __init reboot_setup(char *str) · line 565

Quoted 10 lines
kernel/reboot.c +10 -0
+			 * to be used for rebooting. Skip 's' or 'smp' prefix.
+			 */
+			str += str[1] == 'm' && str[2] == 'p' ? 3 : 1;
+
+			if (isdigit(str[0])) {
+				int cpu = simple_strtoul(str, NULL, 0);
+
+				if (cpu >= num_possible_cpus()) {
+					pr_err("Ignoring the CPU number in reboot= option. "
+					"CPU %d exceeds possible cpu number %d\n",

Same here. I am not sure if Andrew would like to get this on a single line.

In both cases:

Best Regards,
Petr