Add EDAC driver for Intel client SoCs using In-Band ECC
cover Add EDAC driver for Intel client SoCs using In-Band ECC
part1: Add new memory types used by part2
part2: Add EDAC driver for Intel client SoCs using In-Band ECC(IBECC) IP.
The first IBECC-supported SoC is Elkhart Lake.
part3: Add debugfs interface for error address decoding test.
Qiuxu Zhuo (3):
EDAC: Add three new memory types
EDAC/igen6: Add EDAC driver for Intel client SoCs using IBECC EDAC/igen6: Add debugfs interface for Intel client SoC EDAC driver
drivers/edac/Kconfig | 9 + drivers/edac/Makefile | 1 + drivers/edac/edac_mc.c | 3 + drivers/edac/igen6_edac.c | 977 ++++++++++++++++++++++++++++++++++++++ include/linux/edac.h | 9 + 5 files changed, 999 insertions(+) create mode 100644 drivers/edac/igen6_edac.c
Signature · 1 line
2.17.1
Tony Luck
maintainercover Update MAINTAINERS for EDAC
A new driver for Intel client system on chip.
Clean up a couple of F: entries for other EDAC drivers.
Tony Luck (2):
MAINTAINERS: Add entry for Intel IGEN6 EDAC driver
MAINTAINERS: Clean up the F: entries for some EDAC drivers
MAINTAINERS | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-)
[Boris: If there are no objections I'll apply part 1 on top of Qiuxu's series for the edac_igen6 driver (new topic branch in RAS tree). Part 2 can go into the edac-misc branch]
Signature · 1 line
2.21.1
Tony Luck
maintainerPATCH 1/2 MAINTAINERS: Add entry for Intel IGEN6 EDAC driver
New driver for "client" system on chip CPUs.
--- MAINTAINERS | 7 +++++++ 1 file changed, 7 insertions(+)
MAINTAINERS +7 -0
@@ -6353,6 +6353,13 @@ L: [email protected] S: Maintained F: drivers/edac/ie31200_edac.c +EDAC-IGEN6 +M: Tony Luck <[email protected]> +R: Qiuxu Zhuo <[email protected]> +L: [email protected] +S: Maintained +F: drivers/edac/igen6_edac.c + EDAC-MPC85XX M: Johannes Thumshirn <[email protected]> L: [email protected]
Signature · 1 line
2.21.1
Tony Luck
maintainerPATCH 2/2 MAINTAINERS: Clean up the F: entries for some EDAC drivers
In reply to Tony LuckThe edac_altera entry stopped at the "." and needed "[ch]" to match both the driver and the header file.
The edac_skx entry only matched on ".c" files so didn't include skx_common.h
--- MAINTAINERS | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
MAINTAINERS +2 -2
@@ -2486,7 +2486,7 @@ F: drivers/clk/socfpga/ ARM/SOCFPGA EDAC SUPPORT M: Dinh Nguyen <[email protected]> S: Maintained -F: drivers/edac/altera_edac. +F: drivers/edac/altera_edac.[ch] ARM/SPREADTRUM SoC SUPPORT M: Orson Zhai <[email protected]>
@@ -6409,7 +6409,7 @@ EDAC-SKYLAKE M: Tony Luck <[email protected]> L: [email protected] S: Maintained -F: drivers/edac/skx_*.c +F: drivers/edac/skx_*.[ch] EDAC-TI M: Tero Kristo <[email protected]>
Signature · 1 line
2.21.1