arm64: meson: add libretech cc v2 support
Subsystems (2)
Jerome Brunet
reviewerv2 cover arm64: meson: add libretech cc v2 support
This patchset adds support for the Amlogic based libretech cc v2. Like the v1, this revised platform used the s905x SoC.
Changes since v1:
- Move Makefile change to patch #1
- Amend documentation for libretech cc v2
Jerome Brunet (2):
arm64: dts: import libretech-cc-v2 from linux v5.10-rc1
arm64: meson: add support for libretech-cc v2
arch/arm/dts/Makefile | 1 + ...eson-gxl-s905x-libretech-cc-v2-u-boot.dtsi | 7 + .../dts/meson-gxl-s905x-libretech-cc-v2.dts | 318 ++++++++++++++++++ board/amlogic/p212/MAINTAINERS | 1 + configs/libretech-cc_v2_defconfig | 82 +++++ doc/board/amlogic/index.rst | 117 +++---- doc/board/amlogic/libretech-cc.rst | 15 +- 7 files changed, 480 insertions(+), 61 deletions(-) create mode 100644 arch/arm/dts/meson-gxl-s905x-libretech-cc-v2-u-boot.dtsi create mode 100644 arch/arm/dts/meson-gxl-s905x-libretech-cc-v2.dts create mode 100644 configs/libretech-cc_v2_defconfig
Signature · 1 line
2.28.0
Jerome Brunet
reviewerPATCH RESEND v2 1/2 arm64: dts: import libretech-cc-v2 from linux v5.10-rc1
Sync the libretech cc v2 device tree from Linux v5.10-rc1 commit 3650b228f83a ("Linux 5.10-rc1")
--- arch/arm/dts/Makefile | 1 + .../dts/meson-gxl-s905x-libretech-cc-v2.dts | 318 ++++++++++++++++++ 2 files changed, 319 insertions(+) create mode 100644 arch/arm/dts/meson-gxl-s905x-libretech-cc-v2.dts
arch/arm/dts/Makefile +1 -0
@@ -159,6 +159,7 @@ dtb-$(CONFIG_ARCH_MESON) += \ meson-gxl-s905x-p212.dtb \ meson-gxl-s805x-libretech-ac.dtb \ meson-gxl-s905x-libretech-cc.dtb \ + meson-gxl-s905x-libretech-cc-v2.dtb \ meson-gxl-s905x-khadas-vim.dtb \ meson-gxl-s905d-libretech-pc.dtb \ meson-gxm-khadas-vim2.dtb \
arch/arm/dts/meson-gxl-s905x-libretech-cc-v2.dts new file +318 -0
318 lines not on this page · raw message
Signature · 1 line
2.28.0
Jerome Brunet
reviewerPATCH RESEND v2 2/2 arm64: meson: add support for libretech-cc v2
In reply to Jerome BrunetAdd support for the Amlogic based libretech cc version 2. As version 1, it is based on the s905x SoC.
--- ...eson-gxl-s905x-libretech-cc-v2-u-boot.dtsi | 7 ++ board/amlogic/p212/MAINTAINERS | 1 + configs/libretech-cc_v2_defconfig | 82 ++++++++++++ doc/board/amlogic/index.rst | 117 +++++++++--------- doc/board/amlogic/libretech-cc.rst | 15 ++- 5 files changed, 161 insertions(+), 61 deletions(-) create mode 100644 arch/arm/dts/meson-gxl-s905x-libretech-cc-v2-u-boot.dtsi create mode 100644 configs/libretech-cc_v2_defconfig
arch/arm/dts/meson-gxl-s905x-libretech-cc-v2-u-boot.dtsi new file +7 -0
@@ -0,0 +1,7 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2020 BayLibre, SAS. + * Author: Jerome Brunet <[email protected]> + */ + +#include "meson-gxl-u-boot.dtsi"
board/amlogic/p212/MAINTAINERS +1 -0
@@ -7,6 +7,7 @@ F: include/configs/p212.h F: configs/khadas-vim_defconfig F: configs/libretech-ac_defconfig F: configs/libretech-cc_defconfig +F: configs/libretech-cc_v2_defconfig F: configs/p212_defconfig F: doc/board/amlogic/p212.rst F: doc/board/amlogic/libretech-ac.rst
configs/libretech-cc_v2_defconfig new file +82 -0
82 lines not on this page · raw message
doc/board/amlogic/index.rst +59 -58
123 lines not on this page · raw message
doc/board/amlogic/libretech-cc.rst +12 -3
@@ -1,11 +1,12 @@ .. SPDX-License-Identifier: GPL-2.0+ -U-Boot for LibreTech CC -======================= +U-Boot for LibreTech CCs +======================== LibreTech CC is a single board computer manufactured by Libre Technology with the following specifications: + V1: - Amlogic S905X ARM Cortex-A53 quad-core SoC @ 1.5GHz - ARM Mali 450 GPU - 2GB DDR3 SDRAM
@@ -15,6 +16,11 @@ with the following specifications: - 4 x USB 2.0 Host - eMMC, microSD - Infrared receiver + - Jack for CVBS and Audio + + V2: + - Added SPI NOR + - Removed Jack Schematics are available on the manufacturer website.
@@ -27,6 +33,8 @@ U-Boot compilation $ make libretech-cc_defconfig $ make +Use libretech-cc_v2_defconfig for v2. + Image creation --------------
@@ -41,7 +49,8 @@ bootloaders: * acs.bin: built from vendor u-boot source These binaries and the tools required below have been collected and prebuilt -for convenience at <https://github.com/BayLibre/u-boot/releases/> +for convenience at <https://github.com/BayLibre/u-boot/releases/>. These +apply to both v1 and v2. Download and extract the libretech-cc release from there, and set FIPDIR to point to the `fip` subdirectory.
Signature · 1 line
2.28.0
v2 cover arm64: meson: add libretech cc v2 support
In reply to Jerome BrunetQuoted 11 lines · Jerome Brunet
This patchset adds support for the Amlogic based libretech cc v2. Like the v1, this revised platform used the s905x SoC.
Changes since v1:
- MoveMakefilechange to patch #1
- Amend documentation for libretech cc v2Jerome Brunet (2):
arm64: dts: import libretech-cc-v2 from linux v5.10-rc1
arm64: meson: add support for libretech-cc v2
Quoted 12 lines
arch/arm/dts/Makefile | 1 + ...eson-gxl-s905x-libretech-cc-v2-u-boot.dtsi | 7 + .../dts/meson-gxl-s905x-libretech-cc-v2.dts | 318 ++++++++++++++++++ board/amlogic/p212/MAINTAINERS | 1 + configs/libretech-cc_v2_defconfig | 82 +++++ doc/board/amlogic/index.rst | 117 +++---- doc/board/amlogic/libretech-cc.rst | 15 +- 7 files changed, 480 insertions(+), 61 deletions(-) create mode 100644 arch/arm/dts/meson-gxl-s905x-libretech-cc-v2-u-boot.dtsi create mode 100644 arch/arm/dts/meson-gxl-s905x-libretech-cc-v2.dts create mode 100644 configs/libretech-cc_v2_defconfig
Thanks,
Applied to u-boot-amlogic-next