ARM/ARM64: Enable SCMI in default configurations
cover ARM/ARM64: Enable SCMI in default configurations
This patch series enables support for the ARM SCMI and the various drivers provided (cpufreq, clock, sensors, reset) since these are utilized by Broadcom STB platforms.
Please let me know if you would like me to carry those patches through the ARM SoC pull requests for v5.11 or if you would like to see those applied differently.
Thanks!
Florian Fainelli (2):
ARM: multi_v7_defconfig: Enable ARM SCMI protocol and drivers
arm64: defconfig: Enable ARM SCMI protocol and drivers
arch/arm/configs/multi_v7_defconfig | 4 ++++ arch/arm64/configs/defconfig | 4 ++++ 2 files changed, 8 insertions(+)
Signature · 1 line
2.25.1
PATCH 1/2 ARM: multi_v7_defconfig: Enable ARM SCMI protocol and drivers
Enable the ARM SCMI protocol and the common clock, cpufreq and sensors drivers. Broadcom STB platforms (ARCH_BRCMSTB) implement SCMI to provide support for CPU frequency scaling, clock configuration and temperature and current sensors.
--- arch/arm/configs/multi_v7_defconfig | 4 ++++ 1 file changed, 4 insertions(+)
arch/arm/configs/multi_v7_defconfig +4 -0
@@ -109,6 +109,7 @@ CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y CONFIG_CPUFREQ_DT=y CONFIG_ARM_IMX6Q_CPUFREQ=y +CONFIG_ARM_SCMI_CPUFREQ=y CONFIG_ARM_RASPBERRYPI_CPUFREQ=y CONFIG_QORIQ_CPUFREQ=y CONFIG_CPU_IDLE=y
@@ -117,6 +118,7 @@ CONFIG_ARM_ZYNQ_CPUIDLE=y CONFIG_ARM_EXYNOS_CPUIDLE=y CONFIG_ARM_TEGRA_CPUIDLE=y CONFIG_KERNEL_MODE_NEON=y +CONFIG_ARM_SCMI_PROTOCOL=y CONFIG_RASPBERRYPI_FIRMWARE=y CONFIG_TRUSTED_FOUNDATIONS=y CONFIG_BCM47XX_NVRAM=y
@@ -488,6 +490,7 @@ CONFIG_CHARGER_MAX77693=m CONFIG_CHARGER_MAX8997=m CONFIG_CHARGER_MAX8998=m CONFIG_CHARGER_TPS65090=y +CONFIG_SENSORS_ARM_SCMI=y CONFIG_SENSORS_ASPEED=m CONFIG_SENSORS_IIO_HWMON=y CONFIG_SENSORS_LM90=y
@@ -959,6 +962,7 @@ CONFIG_CROS_EC_I2C=m CONFIG_CROS_EC_SPI=m CONFIG_COMMON_CLK_MAX77686=y CONFIG_COMMON_CLK_RK808=m +CONFIG_COMMON_CLK_SCMI=y CONFIG_COMMON_CLK_S2MPS11=m CONFIG_CLK_RASPBERRYPI=y CONFIG_COMMON_CLK_QCOM=y
Signature · 1 line
2.25.1
PATCH 2/2 arm64: defconfig: Enable ARM SCMI protocol and drivers
In reply to Florian FainelliEnable the ARM SCMI protocol and the common clock, cpufreq, reset and sensors drivers. Broadcom STB platforms (ARCH_BRCMSTB) implement SCMI to provide support for CPU frequency scaling, clock configuration and temperature and current sensors.
--- arch/arm64/configs/defconfig | 4 ++++ 1 file changed, 4 insertions(+)
arch/arm64/configs/defconfig +4 -0
@@ -93,8 +93,10 @@ CONFIG_ARM_IMX_CPUFREQ_DT=m CONFIG_ARM_QCOM_CPUFREQ_NVMEM=y CONFIG_ARM_QCOM_CPUFREQ_HW=y CONFIG_ARM_RASPBERRYPI_CPUFREQ=m +CONFIG_ARM_SCMI_CPUFREQ=y CONFIG_ARM_TEGRA186_CPUFREQ=y CONFIG_QORIQ_CPUFREQ=y +CONFIG_ARM_SCMI_PROTOCOL=y CONFIG_ARM_SCPI_PROTOCOL=y CONFIG_RASPBERRYPI_FIRMWARE=y CONFIG_INTEL_STRATIX10_SERVICE=y
@@ -522,6 +524,7 @@ CONFIG_POWER_RESET_SYSCON=y CONFIG_SYSCON_REBOOT_MODE=y CONFIG_BATTERY_SBS=m CONFIG_BATTERY_BQ27XXX=y +CONFIG_SENSORS_ARM_SCMI=y CONFIG_SENSORS_ARM_SCPI=y CONFIG_SENSORS_LM90=m CONFIG_SENSORS_PWM_FAN=m
@@ -865,6 +868,7 @@ CONFIG_CROS_EC=y CONFIG_CROS_EC_I2C=y CONFIG_CROS_EC_SPI=y CONFIG_CROS_EC_CHARDEV=m +CONFIG_COMMON_CLK_SCMI=y CONFIG_COMMON_CLK_RK808=y CONFIG_COMMON_CLK_SCPI=y CONFIG_COMMON_CLK_CS2000_CP=y
Signature · 1 line
2.25.1
Quoted 7 lines · Florian Fainelli
This patch series enables support for the ARM SCMI and the various drivers provided (cpufreq, clock, sensors, reset) since these are utilized by Broadcom STB platforms.
Please let me know if you would like me to carry those patches through the ARM SoC pull requests for v5.11 or if you would like to see those applied differently.
Both looks fine to me.
Signature · 2 lines
Regards, Sudeep
Quoted 5 lines · Sudeep Holla
Quoted 4 lines · Florian Fainelli
This patch series enables support for the ARM SCMI and the various drivers provided (cpufreq, clock, sensors, reset) since these are utilized by Broadcom STB platforms.
Quoted 8 lines
Quoted 3 lines
Please let me know if you would like me to carry those patches through the ARM SoC pull requests for v5.11 or if you would like to see those applied differently.
Both looks fine to me.
Acked-by Sudeep Holla <[email protected]>
Thank you Sudeep, other ARM SoC maintainers, do you mind me picking up those changes through the Broadcom ARM SoC pull request for 5.11?
Signature · 1 line
Florian
Quoted 5 lines · Sudeep Holla
Quoted 4 lines · Florian Fainelli
This patch series enables support for the ARM SCMI and the various drivers provided (cpufreq, clock, sensors, reset) since these are utilized by Broadcom STB platforms.
Quoted 7 lines
Quoted 3 lines
Please let me know if you would like me to carry those patches through the ARM SoC pull requests for v5.11 or if you would like to see those applied differently.
Both looks fine to me.
Acked-by Sudeep Holla <[email protected]>
Series applied, thanks!
Signature · 6 lines
Florian _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel