Fix vaud18 power leakage of mt6359
Subsystems (4)
v2 cover Fix vaud18 power leakage of mt6359
From: "Shane.Chien" <[email protected]>
This series of patches is to fix vaud18 power leakage problem. vaud18 will be enable only when mt6359 audio path is turned on.
Change since v1:
- use dapm regulator supply widget for vaud18 control.
- add vaud18 regulator property in mt6359 dt-binding.
Shane.Chien (2):
ASoC: Fix vaud18 power leakage of mt6359
dt-bindings: mediatek: mt6359: Add new property for mt6359
.../devicetree/bindings/sound/mt6359.yaml | 9 +++++++ sound/soc/codecs/mt6359.c | 25 +------------------- sound/soc/codecs/mt6359.h | 8 ------- 3 files changed, 10 insertions(+), 32 deletions(-)
Signature · 1 line
1.7.9.5
PATCH v2 1/2 ASoC: Fix vaud18 power leakage of mt6359
From: "Shane.Chien" <[email protected]>
vaud18 is power of mt6359 audio path. It should only enable when audio is used, instead of in boot up stage.
Once mt6359 audio path is enabled or disabled, vaud18 is controlled by regulator supply widget "LDO_VAUD18". Due to vaud18 is controlled by regulator dapm macro instead of regmap, the macro MT6359_LDO_VAUD18_CON0 and variable avdd_reg is no used and removed from mt6359.h.
--- sound/soc/codecs/mt6359.c | 25 +------------------------ sound/soc/codecs/mt6359.h | 8 -------- 2 files changed, 1 insertion(+), 32 deletions(-)
sound/soc/codecs/mt6359.c +1 -24
@@ -1943,9 +1943,7 @@ static int mt_ncp_event(struct snd_soc_dapm_widget *w,SND_SOC_DAPM_SUPPLY_S ("CLK_BUF" ,SUPPLY_SEQ_CLK_BUF ,MT6359_DCXO_CW12 ,RG_XO_AUDIO_EN_M_SFT ,0 ,NULL ,0 ), -SND_SOC_DAPM_SUPPLY_S ("LDO_VAUD18" ,SUPPLY_SEQ_LDO_VAUD18 , -MT6359_LDO_VAUD18_CON0 , -RG_LDO_VAUD18_EN_SFT ,0 ,NULL ,0 ), +SND_SOC_DAPM_REGULATOR_SUPPLY ("LDO_VAUD18" ,0 ,0 ),SND_SOC_DAPM_SUPPLY_S ("AUDGLB" ,SUPPLY_SEQ_AUD_GLB ,MT6359_AUDDEC_ANA_CON13 , RG_AUDGLB_PWRDN_VA32_SFT, 1, NULL, 0),
@@ -2807,20 +2805,6 @@ static int mt6359_platform_driver_probe(struct platform_device *pdev)dev_set_drvdata (&pdev->dev, priv); priv->dev = &pdev->dev; - priv->avdd_reg =devm_regulator_get (&pdev->dev,"vaud18" ); -if (IS_ERR (priv->avdd_reg)) { -dev_err (&pdev->dev,"%s(), have no vaud18 supply: %ld" , - __func__,PTR_ERR (priv->avdd_reg)); -return PTR_ERR (priv->avdd_reg); - } - - ret =regulator_enable (priv->avdd_reg); -if (ret) { -dev_err (&pdev->dev,"%s(), failed to enable regulator!\n" , - __func__); -return ret; - } - ret =mt6359_parse_dt (priv);if (ret) {dev_warn (&pdev->dev,"%s() failed to parse dts\n" , __func__);
@@ -2841,13 +2825,6 @@ static int mt6359_platform_driver_remove(struct platform_device *pdev)dev_dbg (&pdev->dev,"%s(), dev name %s\n" , __func__,dev_name (&pdev->dev)); - ret =regulator_disable (priv->avdd_reg); -if (ret) { -dev_err (&pdev->dev,"%s(), failed to disable regulator!\n" , - __func__); -return ret; - } -return 0 ; }
sound/soc/codecs/mt6359.h +0 -8
@@ -135,11 +135,6 @@/* MT6359_DCXO_CW12 */ #define RG_XO_AUDIO_EN_M_SFT 13 -/* LDO_VAUD18_CON0 */ -#define RG_LDO_VAUD18_EN_SFT 0 -#define RG_LDO_VAUD18_EN_MASK 0x1 -#define RG_LDO_VAUD18_EN_MASK_SFT (0x1 << 0) -/* AUD_TOP_CKPDN_CON0 */ #define RG_VOW13M_CK_PDN_SFT 13#define RG_VOW13M_CK_PDN_MASK 0x1
@@ -2132,7 +2127,6 @@#define MT6359_DCXO_CW11 0x7a6#define MT6359_DCXO_CW12 0x7a8 -#define MT6359_LDO_VAUD18_CON0 0x1c98#define MT6359_GPIO_MODE0 0xcc#define MT6359_GPIO_MODE0_SET 0xce
@@ -2469,7 +2463,6 @@ enum {enum {/* common */ SUPPLY_SEQ_CLK_BUF , -SUPPLY_SEQ_LDO_VAUD18 ,SUPPLY_SEQ_AUD_GLB ,SUPPLY_SEQ_HP_PULL_DOWN ,SUPPLY_SEQ_CLKSQ ,
@@ -2629,7 +2622,6 @@ struct mt6359_priv {int hp_gain_ctl;int hp_hifi_mode;int mtkaif_protocol; -struct regulator *avdd_reg; };#define CODEC_MT6359_NAME "mtk-codec-mt6359"
Signature · 1 line
1.7.9.5
PATCH v2 2/2 dt-bindings: mediatek: mt6359: Add new property for mt6359
In reply to Shane ChienFrom: "Shane.Chien" <[email protected]>
This patch add "LDO_VAUD18-supply" property to control vaud18 regulator. It is labeled as required due to mt6359 audio path always need to enable vaud18.
--- .../devicetree/bindings/sound/mt6359.yaml | 9 +++++++++ 1 file changed, 9 insertions(+)
Documentation/devicetree/bindings/sound/mt6359.yaml +9 -0
@@ -17,6 +17,11 @@ description: | Must be a child node of PMIC wrapper. properties: + LDO_VAUD18-supply: + ref: /schemas/types.yaml#/definitions/phandle + description: | + Regulator of LDO VAUD18 at 1.8V. + mediatek,dmic-mode: $ref: /schemas/types.yaml#/definitions/uint32 description: |
@@ -49,11 +54,15 @@ properties: description: | Specifies the type of mic type connected to adc2 +required: + - LDO_VAUD18-supply + additionalProperties: false examples: - | mt6359codec: mt6359codec { + LDO_VAUD18-supply = <&mt6359p_vaud18_reg>; mediatek,dmic-mode = <0>; mediatek,mic-type-0 = <2>; };
Signature · 1 line
1.7.9.5
Rob Herring
maintainerRe: [PATCH v2 2/2] dt-bindings: mediatek: mt6359: Add new property for mt6359
Quoted 11 lines · Shane Chien
From: "Shane.Chien" <[email protected]>
This patch add "LDO_VAUD18-supply" property to control vaud18 regulator. It is labeled as required due to mt6359 audio path always need to enable vaud18.
Signed-off-by Shane.Chien <[email protected]>--- .../devicetree/bindings/sound/mt6359.yaml | 9 +++++++++ 1 file changed, 9 insertions(+)
My bot found errors running 'make dt_binding_check' on your patch:
yamllint warnings/errors:
dtschema/dtc warnings/errors:
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/sound/mt6359.yaml: properties:LDO_VAUD18-supply: Additional properties are not allowed ('ref' was unexpected)
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/sound/mt6359.yaml: properties:LDO_VAUD18-supply: 'ref' is not one of ['$ref', 'additionalItems', 'additionalProperties', 'allOf', 'anyOf', 'const', 'contains', 'default', 'dependencies', 'deprecated', 'description', 'else', 'enum', 'exclusiveMaximum', 'exclusiveMinimum', 'items', 'if', 'minItems', 'minimum', 'maxItems', 'maximum', 'multipleOf', 'not', 'oneOf', 'pattern', 'patternProperties', 'properties', 'required', 'then', 'type', 'typeSize', 'unevaluatedProperties', 'uniqueItems'] /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/sound/mt6359.yaml: ignoring, error in schema: properties: LDO_VAUD18-supply
warning: no schema found in file: ./Documentation/devicetree/bindings/sound/mt6359.yaml
See https://patchwork.ozlabs.org/patch/1396618
The base for the patch is generally the last rc1. Any dependencies should be noted.
If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date:
pip3 install dtschema --upgrade
Please check and re-submit.
Mark Brown
maintainerQuoted 8 lines · Shane Chien
This series of patches is to fix vaud18 power leakage problem. vaud18 will be enable only when mt6359 audio path is turned on.
Change since v1:
- use dapm regulator supply widget for vaud18 control.
- add vaud18 regulator property in mt6359 dt-binding.[...]
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next
Thanks!
[1/1] ASoC: Fix vaud18 power leakage of mt6359
commit: 64a70744b77898a15d7a5b2b4dc0fa9523a75cde
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks,
Mark