ARM: dts: imx7ulp: Pass the CPU 'clock-frequency' property
Subsystems (2)
Fabio Estevam
reviewerPATCH 1/1 ARM: dts: imx7ulp: Pass the CPU 'clock-frequency' property
The default i.MX7ULP CPU frequency is 500.21 MHz.
Pass the 'clock-frequency' property to avoid the following warning message during boot:
[ 0.013005] /cpus/cpu@f00 missing clock-frequency property
Fixes 20434dc92c05 ("ARM: dts: imx: add common imx7ulp dtsi support")
Signed-off-by Fabio Estevam <[email protected]>
--- arch/arm/boot/dts/imx7ulp.dtsi | 1 + 1 file changed, 1 insertion(+)
arch/arm/boot/dts/imx7ulp.dtsi +1 -0
@@ -41,6 +41,7 @@ compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <0xf00>; + clock-frequency = <500210526>; }; };
Signature · 7 lines
2.17.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Quoted 1 line · Fabio Estevam
The default i.MX7ULP CPU frequency is 500.21 MHz.
As bootloader may configure the frequency as it like, I'm not sure what the "default" means here.
Quoted 5 lines
Pass the 'clock-frequency' property to avoid the following warning message during boot:
[ 0.013005] /cpus/cpu@f00 missing clock-frequency property
To me, this looks like as an useful warning message to bootloaders which do not fill this property based on the actual running frequency.
Shawn
Quoted 22 lines
Fixes 20434dc92c05 ("ARM: dts: imx: add common imx7ulp dtsi support")Signed-off-by Fabio Estevam <[email protected]>--- arch/arm/boot/dts/imx7ulp.dtsi | 1 + 1 file changed, 1 insertion(+)arch/arm/boot/dts/imx7ulp.dtsi +1
-0@@ -41,6 +41,7 @@ compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <0xf00>; + clock-frequency = <500210526>; }; };Signature · 1 line
2.17.1
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel