ARM64: tegra: Correct the UART for Jetson Xavier NX
Subsystems (3)
Jon Hunter
maintainerPATCH 1/1 ARM64: tegra: Correct the UART for Jetson Xavier NX
The Jetson Xavier NX board routes UARTA to the 40-pin header and UARTC to a 12-pin debug header. The UARTs can be used by either the Tegra Combined UART (TCU) driver or the Tegra 8250 driver. By default, the TCU will use UARTC on Jetson Xavier NX. Currently, device-tree for Xavier NX enables the TCU and the Tegra 8250 node for UARTC. Fix this by disabling the Tegra 8250 node for UARTC and enabling the Tegra 8250 node for UARTA.
Fixes 3f9efbbe57bc ("arm64: tegra: Add support for Jetson Xavier NX")
Signed-off-by Jon Hunter <[email protected]>
--- arch/arm64/boot/dts/nvidia/tegra194-p3668-0000.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm64/boot/dts/nvidia/tegra194-p3668-0000.dtsi +1 -1
@@ -54,7 +54,7 @@ memory-controller@2c00000 { status = "okay"; }; - serial@c280000 { + serial@3100000 { status = "okay"; };
Signature · 1 line
2.25.1