Skip to contentSkip to conversation

iommu/tegra-smmu: Some pending reviewed changes

PATCH RESEND Superseded Nicolin Chen 4 participants 14 messages Nov 11, 2020 – Nov 25, 2020

Subsystems (3)

v1 of 4 Superseded Latest is v4 →

lore
Share & tools
lore
#0 lore raw

cover iommu/tegra-smmu: Some pending reviewed changes

This is a merged set of resend for previously two series of patches that were reviewed/acked a month ago yet have not got applied.

Series-1: https://lkml.org/lkml/2020/9/29/73
"[PATCH v4 0/2] iommu/tegra-smmu: Two followup changes"

Series-2: https://lkml.org/lkml/2020/10/9/808
"[PATCH v7 0/3] iommu/tegra-smmu: Add PCI support"

Nicolin Chen (5):
iommu/tegra-smmu: Unwrap tegra_smmu_group_get iommu/tegra-smmu: Expand mutex protection range iommu/tegra-smmu: Use fwspec in tegra_smmu_(de)attach_dev iommu/tegra-smmu: Rework tegra_smmu_probe_device() iommu/tegra-smmu: Add PCI support

 drivers/iommu/tegra-smmu.c | 240 ++++++++++++++-----------------------
 1 file changed, 88 insertions(+), 152 deletions(-)
Signature · 6 lines
2.17.1

_______________________________________________
iommu mailing list
[email protected]
https://lists.linuxfoundation.org/mailman/listinfo/iommu
#1 lore raw

PATCH RESEND 1/5 iommu/tegra-smmu: Unwrap tegra_smmu_group_get

The tegra_smmu_group_get was added to group devices in different SWGROUPs and it'd return a NULL group pointer upon a mismatch at tegra_smmu_find_group(), so for most of clients/devices, it very likely would mismatch and need a fallback generic_device_group().

But now tegra_smmu_group_get handles devices in same SWGROUP too, which means that it would allocate a group for every new SWGROUP or would directly return an existing one upon matching a SWGROUP, i.e. any device will go through this function.

So possibility of having a NULL group pointer in device_group() is upon failure of either devm_kzalloc() or iommu_group_alloc(). In either case, calling generic_device_group() no longer makes a sense. Especially for devm_kzalloc() failing case, it'd cause a problem if it fails at devm_kzalloc() yet succeeds at a fallback generic_device_group(), because it does not create a group->list for other devices to match.

This patch simply unwraps the function to clean it up.

---
 drivers/iommu/tegra-smmu.c | 19 ++++---------------
 1 file changed, 4 insertions(+), 15 deletions(-)
drivers/iommu/tegra-smmu.c +4 -15
index 0becdbfea306..ec4c9dafff95 100644
@@ -903,10 +903,12 @@ static void tegra_smmu_group_release(void *iommu_data)
 	mutex_unlock(&smmu->lock);
 }
 
-static struct iommu_group *tegra_smmu_group_get(struct tegra_smmu *smmu,
-						unsigned int swgroup)
+static struct iommu_group *tegra_smmu_device_group(struct device *dev)
 {
+	struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
+	struct tegra_smmu *smmu = dev_iommu_priv_get(dev);
 	const struct tegra_smmu_group_soc *soc;
+	unsigned int swgroup = fwspec->ids[0];
 	struct tegra_smmu_group *group;
 	struct iommu_group *grp;
 
@@ -950,19 +952,6 @@ static struct iommu_group *tegra_smmu_group_get(struct tegra_smmu *smmu,
 	return group->group;
 }
 
-static struct iommu_group *tegra_smmu_device_group(struct device *dev)
-{
-	struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
-	struct tegra_smmu *smmu = dev_iommu_priv_get(dev);
-	struct iommu_group *group;
-
-	group = tegra_smmu_group_get(smmu, fwspec->ids[0]);
-	if (!group)
-		group = generic_device_group(dev);
-
-	return group;
-}
-
 static int tegra_smmu_of_xlate(struct device *dev,
 			       struct of_phandle_args *args)
 {
Signature · 6 lines
2.17.1

_______________________________________________
iommu mailing list
[email protected]
https://lists.linuxfoundation.org/mailman/listinfo/iommu
#2 lore raw

PATCH RESEND 2/5 iommu/tegra-smmu: Expand mutex protection range

In reply to Nicolin Chen

This is used to protect potential race condition at use_count. since probes of client drivers, calling attach_dev(), may run concurrently.

---
 drivers/iommu/tegra-smmu.c | 34 +++++++++++++++++++++-------------
 1 file changed, 21 insertions(+), 13 deletions(-)
drivers/iommu/tegra-smmu.c +21 -13
index ec4c9dafff95..6a3ecc334481 100644
@@ -256,26 +256,19 @@ static int tegra_smmu_alloc_asid(struct tegra_smmu *smmu, unsigned int *idp)
 {
 	unsigned long id;
 
-	mutex_lock(&smmu->lock);
-
 	id = find_first_zero_bit(smmu->asids, smmu->soc->num_asids);
-	if (id >= smmu->soc->num_asids) {
-		mutex_unlock(&smmu->lock);
+	if (id >= smmu->soc->num_asids)
 		return -ENOSPC;
-	}
 
 	set_bit(id, smmu->asids);
 	*idp = id;
 
-	mutex_unlock(&smmu->lock);
 	return 0;
 }
 
 static void tegra_smmu_free_asid(struct tegra_smmu *smmu, unsigned int id)
 {
-	mutex_lock(&smmu->lock);
 	clear_bit(id, smmu->asids);
-	mutex_unlock(&smmu->lock);
 }
 
 static bool tegra_smmu_capable(enum iommu_cap cap)
@@ -420,17 +413,21 @@ static int tegra_smmu_as_prepare(struct tegra_smmu *smmu,
 				 struct tegra_smmu_as *as)
 {
 	u32 value;
-	int err;
+	int err = 0;
+
+	mutex_lock(&smmu->lock);
 
 	if (as->use_count > 0) {
 		as->use_count++;
-		return 0;
+		goto unlock;
 	}
 
 	as->pd_dma = dma_map_page(smmu->dev, as->pd, 0, SMMU_SIZE_PD,
 				  DMA_TO_DEVICE);
-	if (dma_mapping_error(smmu->dev, as->pd_dma))
-		return -ENOMEM;
+	if (dma_mapping_error(smmu->dev, as->pd_dma)) {
+		err = -ENOMEM;
+		goto unlock;
+	}
 
 	/* We can't handle 64-bit DMA addresses */
 	if (!smmu_dma_addr_valid(smmu, as->pd_dma)) {
@@ -453,24 +450,35 @@ static int tegra_smmu_as_prepare(struct tegra_smmu *smmu,
 	as->smmu = smmu;
 	as->use_count++;
 
+	mutex_unlock(&smmu->lock);
+
 	return 0;
 
 err_unmap:
 	dma_unmap_page(smmu->dev, as->pd_dma, SMMU_SIZE_PD, DMA_TO_DEVICE);
+unlock:
+	mutex_unlock(&smmu->lock);
+
 	return err;
 }
 
 static void tegra_smmu_as_unprepare(struct tegra_smmu *smmu,
 				    struct tegra_smmu_as *as)
 {
-	if (--as->use_count > 0)
+	mutex_lock(&smmu->lock);
+
+	if (--as->use_count > 0) {
+		mutex_unlock(&smmu->lock);
 		return;
+	}
 
 	tegra_smmu_free_asid(smmu, as->id);
 
 	dma_unmap_page(smmu->dev, as->pd_dma, SMMU_SIZE_PD, DMA_TO_DEVICE);
 
 	as->smmu = NULL;
+
+	mutex_unlock(&smmu->lock);
 }
 
 static int tegra_smmu_attach_dev(struct iommu_domain *domain,
Signature · 6 lines
2.17.1

_______________________________________________
iommu mailing list
[email protected]
https://lists.linuxfoundation.org/mailman/listinfo/iommu
#3 lore raw

PATCH RESEND 3/5 iommu/tegra-smmu: Use fwspec in tegra_smmu_(de)attach_dev

In reply to Nicolin Chen

In tegra_smmu_(de)attach_dev() functions, we poll DTB for each client's iommus property to get swgroup ID in order to prepare "as" and enable smmu. Actually tegra_smmu_configure() prepared an fwspec for each client, and added to the fwspec all swgroup IDs of client DT node in DTB.

So this patch uses fwspec in tegra_smmu_(de)attach_dev() so as to replace the redundant DT polling code.

---
 drivers/iommu/tegra-smmu.c | 56 ++++++++++++++++----------------------
 1 file changed, 23 insertions(+), 33 deletions(-)
drivers/iommu/tegra-smmu.c +23 -33
index 6a3ecc334481..297d49f3f80e 100644
@@ -484,60 +484,50 @@ static void tegra_smmu_as_unprepare(struct tegra_smmu *smmu,
 static int tegra_smmu_attach_dev(struct iommu_domain *domain,
 				 struct device *dev)
 {
+	struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
 	struct tegra_smmu *smmu = dev_iommu_priv_get(dev);
 	struct tegra_smmu_as *as = to_smmu_as(domain);
-	struct device_node *np = dev->of_node;
-	struct of_phandle_args args;
-	unsigned int index = 0;
-	int err = 0;
-
-	while (!of_parse_phandle_with_args(np, "iommus", "#iommu-cells", index,
-					   &args)) {
-		unsigned int swgroup = args.args[0];
-
-		if (args.np != smmu->dev->of_node) {
-			of_node_put(args.np);
-			continue;
-		}
+	unsigned int index;
+	int err;
 
-		of_node_put(args.np);
+	if (!fwspec)
+		return -ENOENT;
 
+	for (index = 0; index < fwspec->num_ids; index++) {
 		err = tegra_smmu_as_prepare(smmu, as);
-		if (err < 0)
-			return err;
+		if (err)
+			goto disable;
 
-		tegra_smmu_enable(smmu, swgroup, as->id);
-		index++;
+		tegra_smmu_enable(smmu, fwspec->ids[index], as->id);
 	}
 
 	if (index == 0)
 		return -ENODEV;
 
 	return 0;
+
+disable:
+	while (index--) {
+		tegra_smmu_disable(smmu, fwspec->ids[index], as->id);
+		tegra_smmu_as_unprepare(smmu, as);
+	}
+
+	return err;
 }
 
 static void tegra_smmu_detach_dev(struct iommu_domain *domain, struct device *dev)
 {
+	struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
 	struct tegra_smmu_as *as = to_smmu_as(domain);
-	struct device_node *np = dev->of_node;
 	struct tegra_smmu *smmu = as->smmu;
-	struct of_phandle_args args;
-	unsigned int index = 0;
-
-	while (!of_parse_phandle_with_args(np, "iommus", "#iommu-cells", index,
-					   &args)) {
-		unsigned int swgroup = args.args[0];
+	unsigned int index;
 
-		if (args.np != smmu->dev->of_node) {
-			of_node_put(args.np);
-			continue;
-		}
-
-		of_node_put(args.np);
+	if (!fwspec)
+		return;
 
-		tegra_smmu_disable(smmu, swgroup, as->id);
+	for (index = 0; index < fwspec->num_ids; index++) {
+		tegra_smmu_disable(smmu, fwspec->ids[index], as->id);
 		tegra_smmu_as_unprepare(smmu, as);
-		index++;
 	}
 }
 
Signature · 6 lines
2.17.1

_______________________________________________
iommu mailing list
[email protected]
https://lists.linuxfoundation.org/mailman/listinfo/iommu
Acked-by on v1 3/5
#4 lore raw

Re: [PATCH RESEND 3/5] iommu/tegra-smmu: Use fwspec in tegra_smmu_(de)attach_dev

Quoted 9 lines · Nicolin Chen

In tegra_smmu_(de)attach_dev() functions, we poll DTB for each client's iommus property to get swgroup ID in order to prepare "as" and enable smmu. Actually tegra_smmu_configure() prepared an fwspec for each client, and added to the fwspec all swgroup IDs of client DT node in DTB.

So this patch uses fwspec in tegra_smmu_(de)attach_dev() so as to replace the redundant DT polling code.

Quoted 6 lines
---
 drivers/iommu/tegra-smmu.c | 56 ++++++++++++++++----------------------
 1 file changed, 23 insertions(+), 33 deletions(-)

_______________________________________________
iommu mailing list
[email protected]
https://lists.linuxfoundation.org/mailman/listinfo/iommu

#5 lore raw

PATCH RESEND 4/5 iommu/tegra-smmu: Rework tegra_smmu_probe_device()

In reply to Nicolin Chen

The bus_set_iommu() in tegra_smmu_probe() enumerates all clients to call in tegra_smmu_probe_device() where each client searches its DT node for smmu pointer and swgroup ID, so as to configure an fwspec. But this requires a valid smmu pointer even before mc and smmu drivers are probed. So in tegra_smmu_probe() we added a line of code to fill mc->smmu, marking "a bit of a hack".

This works for most of clients in the DTB, however, doesn't work for a client that doesn't exist in DTB, a PCI device for example.

Actually, if we return ERR_PTR(-ENODEV) in ->probe_device() when it's called from bus_set_iommu(), iommu core will let everything carry on. Then when a client gets probed, of_iommu_configure() in iommu core will search DTB for swgroup ID and call ->of_xlate() to prepare an fwspec, similar to tegra_smmu_probe_device() and tegra_smmu_configure(). Then it'll call tegra_smmu_probe_device() again, and this time we shall return smmu->iommu pointer properly.

So we can get rid of tegra_smmu_find() and tegra_smmu_configure() along with DT polling code by letting the iommu core handle every thing, except a problem that we search iommus property in DTB not only for swgroup ID but also for mc node to get mc->smmu pointer to call dev_iommu_priv_set() and return the smmu->iommu pointer. So we'll need to find another way to get smmu pointer.

Referencing the implementation of sun50i-iommu driver, of_xlate() has client's dev pointer, mc node and swgroup ID. This means that we can call dev_iommu_priv_set() in of_xlate() instead, so we can simply get smmu pointer in ->probe_device().

This patch reworks tegra_smmu_probe_device() by:
1) Removing mc->smmu hack in tegra_smmu_probe() so as to return ERR_PTR(-ENODEV) in tegra_smmu_probe_device() during stage of tegra_smmu_probe/tegra_mc_probe().
2) Moving dev_iommu_priv_set() to of_xlate() so we can get smmu pointer in tegra_smmu_probe_device() to replace DTB polling.
3) Removing tegra_smmu_configure() accordingly since iommu core takes care of it.

This also fixes a problem that previously we could add clients to iommu groups before iommu core initializes its default domain:

    ubuntu@jetson:~$ dmesg | grep iommu
    platform 50000000.host1x: Adding to iommu group 1
    platform 57000000.gpu: Adding to iommu group 2
    iommu: Default domain type: Translated
    platform 54200000.dc: Adding to iommu group 3
    platform 54240000.dc: Adding to iommu group 3
    platform 54340000.vic: Adding to iommu group 4

Though it works fine with IOMMU_DOMAIN_UNMANAGED, but will have warnings if switching to IOMMU_DOMAIN_DMA:
iommu: Failed to allocate default IOMMU domain of type 0 for
group (null) - Falling back to IOMMU_DOMAIN_DMA
iommu: Failed to allocate default IOMMU domain of type 0 for
group (null) - Falling back to IOMMU_DOMAIN_DMA

Now, bypassing the first probe_device() call from bus_set_iommu() fixes the sequence:

    ubuntu@jetson:~$ dmesg | grep iommu
    iommu: Default domain type: Translated
    tegra-host1x 50000000.host1x: Adding to iommu group 0
    tegra-dc 54200000.dc: Adding to iommu group 1
    tegra-dc 54240000.dc: Adding to iommu group 1
    tegra-vic 54340000.vic: Adding to iommu group 2
    nouveau 57000000.gpu: Adding to iommu group 3

Note that dmesg log above is testing with IOMMU_DOMAIN_UNMANAGED.

---
 drivers/iommu/tegra-smmu.c | 96 ++++++--------------------------------
 1 file changed, 15 insertions(+), 81 deletions(-)
drivers/iommu/tegra-smmu.c +15 -81
index 297d49f3f80e..f45ed43cf8db 100644
@@ -797,75 +797,9 @@ static phys_addr_t tegra_smmu_iova_to_phys(struct iommu_domain *domain,
 	return SMMU_PFN_PHYS(pfn) + SMMU_OFFSET_IN_PAGE(iova);
 }
 
-static struct tegra_smmu *tegra_smmu_find(struct device_node *np)
-{
-	struct platform_device *pdev;
-	struct tegra_mc *mc;
-
-	pdev = of_find_device_by_node(np);
-	if (!pdev)
-		return NULL;
-
-	mc = platform_get_drvdata(pdev);
-	if (!mc)
-		return NULL;
-
-	return mc->smmu;
-}
-
-static int tegra_smmu_configure(struct tegra_smmu *smmu, struct device *dev,
-				struct of_phandle_args *args)
-{
-	const struct iommu_ops *ops = smmu->iommu.ops;
-	int err;
-
-	err = iommu_fwspec_init(dev, &dev->of_node->fwnode, ops);
-	if (err < 0) {
-		dev_err(dev, "failed to initialize fwspec: %d\n", err);
-		return err;
-	}
-
-	err = ops->of_xlate(dev, args);
-	if (err < 0) {
-		dev_err(dev, "failed to parse SW group ID: %d\n", err);
-		iommu_fwspec_free(dev);
-		return err;
-	}
-
-	return 0;
-}
-
 static struct iommu_device *tegra_smmu_probe_device(struct device *dev)
 {
-	struct device_node *np = dev->of_node;
-	struct tegra_smmu *smmu = NULL;
-	struct of_phandle_args args;
-	unsigned int index = 0;
-	int err;
-
-	while (of_parse_phandle_with_args(np, "iommus", "#iommu-cells", index,
-					  &args) == 0) {
-		smmu = tegra_smmu_find(args.np);
-		if (smmu) {
-			err = tegra_smmu_configure(smmu, dev, &args);
-			of_node_put(args.np);
-
-			if (err < 0)
-				return ERR_PTR(err);
-
-			/*
-			 * Only a single IOMMU master interface is currently
-			 * supported by the Linux kernel, so abort after the
-			 * first match.
-			 */
-			dev_iommu_priv_set(dev, smmu);
-
-			break;
-		}
-
-		of_node_put(args.np);
-		index++;
-	}
+	struct tegra_smmu *smmu = dev_iommu_priv_get(dev);
 
 	if (!smmu)
 		return ERR_PTR(-ENODEV);
@@ -873,10 +807,7 @@ static struct iommu_device *tegra_smmu_probe_device(struct device *dev)
 	return &smmu->iommu;
 }
 
-static void tegra_smmu_release_device(struct device *dev)
-{
-	dev_iommu_priv_set(dev, NULL);
-}
+static void tegra_smmu_release_device(struct device *dev) {}
 
 static const struct tegra_smmu_group_soc *
 tegra_smmu_find_group(struct tegra_smmu *smmu, unsigned int swgroup)
@@ -953,8 +884,21 @@ static struct iommu_group *tegra_smmu_device_group(struct device *dev)
 static int tegra_smmu_of_xlate(struct device *dev,
 			       struct of_phandle_args *args)
 {
+	struct platform_device *iommu_pdev = of_find_device_by_node(args->np);
+	struct tegra_mc *mc = platform_get_drvdata(iommu_pdev);
 	u32 id = args->args[0];
 
+	/*
+	 * Note: we are here releasing the reference of &iommu_pdev->dev, which
+	 * is mc->dev. Although some functions in tegra_smmu_ops may keep using
+	 * its private data beyond this point, it's still safe to do so because
+	 * the SMMU parent device is the same as the MC, so the reference count
+	 * isn't strictly necessary.
+	 */
+	put_device(&iommu_pdev->dev);
+
+	dev_iommu_priv_set(dev, mc->smmu);
+
 	return iommu_fwspec_add_ids(dev, &id, 1);
 }
 
@@ -1079,16 +1023,6 @@ struct tegra_smmu *tegra_smmu_probe(struct device *dev,
 	if (!smmu)
 		return ERR_PTR(-ENOMEM);
 
-	/*
-	 * This is a bit of a hack. Ideally we'd want to simply return this
-	 * value. However the IOMMU registration process will attempt to add
-	 * all devices to the IOMMU when bus_set_iommu() is called. In order
-	 * not to rely on global variables to track the IOMMU instance, we
-	 * set it here so that it can be looked up from the .probe_device()
-	 * callback via the IOMMU device's .drvdata field.
-	 */
-	mc->smmu = smmu;
-
 	size = BITS_TO_LONGS(soc->num_asids) * sizeof(long);
 
 	smmu->asids = devm_kzalloc(dev, size, GFP_KERNEL);
Signature · 6 lines
2.17.1

_______________________________________________
iommu mailing list
[email protected]
https://lists.linuxfoundation.org/mailman/listinfo/iommu
Acked-by on v1 4/5
#6 lore raw

Re: [PATCH RESEND 4/5] iommu/tegra-smmu: Rework tegra_smmu_probe_device()

Quoted 66 lines · Nicolin Chen

The bus_set_iommu() in tegra_smmu_probe() enumerates all clients to call in tegra_smmu_probe_device() where each client searches its DT node for smmu pointer and swgroup ID, so as to configure an fwspec. But this requires a valid smmu pointer even before mc and smmu drivers are probed. So in tegra_smmu_probe() we added a line of code to fill mc->smmu, marking "a bit of a hack".

This works for most of clients in the DTB, however, doesn't work for a client that doesn't exist in DTB, a PCI device for example.

Actually, if we return ERR_PTR(-ENODEV) in ->probe_device() when it's called from bus_set_iommu(), iommu core will let everything carry on. Then when a client gets probed, of_iommu_configure() in iommu core will search DTB for swgroup ID and call ->of_xlate() to prepare an fwspec, similar to tegra_smmu_probe_device() and tegra_smmu_configure(). Then it'll call tegra_smmu_probe_device() again, and this time we shall return smmu->iommu pointer properly.

So we can get rid of tegra_smmu_find() and tegra_smmu_configure() along with DT polling code by letting the iommu core handle every thing, except a problem that we search iommus property in DTB not only for swgroup ID but also for mc node to get mc->smmu pointer to call dev_iommu_priv_set() and return the smmu->iommu pointer. So we'll need to find another way to get smmu pointer.

Referencing the implementation of sun50i-iommu driver, of_xlate() has client's dev pointer, mc node and swgroup ID. This means that we can call dev_iommu_priv_set() in of_xlate() instead, so we can simply get smmu pointer in ->probe_device().

This patch reworks tegra_smmu_probe_device() by:
1) Removing mc->smmu hack in tegra_smmu_probe() so as to return ERR_PTR(-ENODEV) in tegra_smmu_probe_device() during stage of tegra_smmu_probe/tegra_mc_probe().
2) Moving dev_iommu_priv_set() to of_xlate() so we can get smmu pointer in tegra_smmu_probe_device() to replace DTB polling.
3) Removing tegra_smmu_configure() accordingly since iommu core takes care of it.

This also fixes a problem that previously we could add clients to iommu groups before iommu core initializes its default domain:

    ubuntu@jetson:~$ dmesg | grep iommu
    platform 50000000.host1x: Adding to iommu group 1
    platform 57000000.gpu: Adding to iommu group 2
    iommu: Default domain type: Translated
    platform 54200000.dc: Adding to iommu group 3
    platform 54240000.dc: Adding to iommu group 3
    platform 54340000.vic: Adding to iommu group 4

Though it works fine with IOMMU_DOMAIN_UNMANAGED, but will have warnings if switching to IOMMU_DOMAIN_DMA:
iommu: Failed to allocate default IOMMU domain of type 0 for
group (null) - Falling back to IOMMU_DOMAIN_DMA
iommu: Failed to allocate default IOMMU domain of type 0 for
group (null) - Falling back to IOMMU_DOMAIN_DMA

Now, bypassing the first probe_device() call from bus_set_iommu() fixes the sequence:

    ubuntu@jetson:~$ dmesg | grep iommu
    iommu: Default domain type: Translated
    tegra-host1x 50000000.host1x: Adding to iommu group 0
    tegra-dc 54200000.dc: Adding to iommu group 1
    tegra-dc 54240000.dc: Adding to iommu group 1
    tegra-vic 54340000.vic: Adding to iommu group 2
    nouveau 57000000.gpu: Adding to iommu group 3
Quoted 8 lines

Note that dmesg log above is testing with IOMMU_DOMAIN_UNMANAGED.

---
 drivers/iommu/tegra-smmu.c | 96 ++++++--------------------------------
 1 file changed, 15 insertions(+), 81 deletions(-)

_______________________________________________
iommu mailing list
[email protected]
https://lists.linuxfoundation.org/mailman/listinfo/iommu

#7 lore raw

PATCH RESEND 5/5 iommu/tegra-smmu: Add PCI support

In reply to Nicolin Chen

This patch simply adds support for PCI devices.

---
 drivers/iommu/tegra-smmu.c | 35 +++++++++++++++++++++++++----------
 1 file changed, 25 insertions(+), 10 deletions(-)
drivers/iommu/tegra-smmu.c +25 -10
index f45ed43cf8db..4a3f095a1c26 100644
@@ -10,6 +10,7 @@
 #include <linux/kernel.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
+#include <linux/pci.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 #include <linux/spinlock.h>
@@ -865,7 +866,11 @@ static struct iommu_group *tegra_smmu_device_group(struct device *dev)
 	group->smmu = smmu;
 	group->soc = soc;
 
-	group->group = iommu_group_alloc();
+	if (dev_is_pci(dev))
+		group->group = pci_device_group(dev);
+	else
+		group->group = generic_device_group(dev);
+
 	if (IS_ERR(group->group)) {
 		devm_kfree(smmu->dev, group);
 		mutex_unlock(&smmu->lock);
@@ -1075,22 +1080,32 @@ struct tegra_smmu *tegra_smmu_probe(struct device *dev,
 	iommu_device_set_fwnode(&smmu->iommu, dev->fwnode);
 
 	err = iommu_device_register(&smmu->iommu);
-	if (err) {
-		iommu_device_sysfs_remove(&smmu->iommu);
-		return ERR_PTR(err);
-	}
+	if (err)
+		goto remove_sysfs;
 
 	err = bus_set_iommu(&platform_bus_type, &tegra_smmu_ops);
-	if (err < 0) {
-		iommu_device_unregister(&smmu->iommu);
-		iommu_device_sysfs_remove(&smmu->iommu);
-		return ERR_PTR(err);
-	}
+	if (err < 0)
+		goto unregister;
+
+#ifdef CONFIG_PCI
+	err = bus_set_iommu(&pci_bus_type, &tegra_smmu_ops);
+	if (err < 0)
+		goto unset_platform_bus;
+#endif
 
 	if (IS_ENABLED(CONFIG_DEBUG_FS))
 		tegra_smmu_debugfs_init(smmu);
 
 	return smmu;
+
+unset_platform_bus: __maybe_unused;
+	bus_set_iommu(&platform_bus_type, NULL);
+unregister:
+	iommu_device_unregister(&smmu->iommu);
+remove_sysfs:
+	iommu_device_sysfs_remove(&smmu->iommu);
+
+	return ERR_PTR(err);
 }
 
 void tegra_smmu_remove(struct tegra_smmu *smmu)
Signature · 6 lines
2.17.1

_______________________________________________
iommu mailing list
[email protected]
https://lists.linuxfoundation.org/mailman/listinfo/iommu
Acked-by on v1 5/5
#8 lore raw

Re: [PATCH RESEND 5/5] iommu/tegra-smmu: Add PCI support

Quoted 8 lines · Nicolin Chen

This patch simply adds support for PCI devices.

---
 drivers/iommu/tegra-smmu.c | 35 +++++++++++++++++++++++++----------
 1 file changed, 25 insertions(+), 10 deletions(-)
#9 lore raw
In reply to Nicolin Chen

Hi Joerg,

These five patches were acked by Thierry and acked-n-tested by Dmitry a while ago. Would it be possible for you to apply them?

Thanks!

Quoted 22 lines · Nicolin Chen

This is a merged set of resend for previously two series of patches that were reviewed/acked a month ago yet have not got applied.

Series-1: https://lkml.org/lkml/2020/9/29/73
"[PATCH v4 0/2] iommu/tegra-smmu: Two followup changes"

Series-2: https://lkml.org/lkml/2020/10/9/808
"[PATCH v7 0/3] iommu/tegra-smmu: Add PCI support"

Nicolin Chen (5):
iommu/tegra-smmu: Unwrap tegra_smmu_group_get iommu/tegra-smmu: Expand mutex protection range iommu/tegra-smmu: Use fwspec in tegra_smmu_(de)attach_dev iommu/tegra-smmu: Rework tegra_smmu_probe_device() iommu/tegra-smmu: Add PCI support

 drivers/iommu/tegra-smmu.c | 240 ++++++++++++++-----------------------
 1 file changed, 88 insertions(+), 152 deletions(-)
Signature · 1 line
2.17.1
#10 lore raw

25.11.2020 00:21, Nicolin Chen пишет:

Quoted 6 lines

Hi Joerg,

These five patches were acked by Thierry and acked-n-tested by Dmitry a while ago. Would it be possible for you to apply them?

Thanks!

Hi,

You probably should try to ping Will Deacon.

https://lkml.org/lkml/2020/11/17/243

#11 lore raw
Quoted 6 lines · Dmitry Osipenko

25.11.2020 00:21, Nicolin Chen пишет:

Quoted 5 lines

Hi Joerg,

These five patches were acked by Thierry and acked-n-tested by Dmitry a while ago. Would it be possible for you to apply them?

Quoted 7 lines
Quoted 1 line

Thanks!

Hi,

You probably should try to ping Will Deacon.

https://lkml.org/lkml/2020/11/17/243

Thank you, Dmitry.
--

Will, would it be possible for you to take these changes?

I sent them on Nov 11 to the following lists:
[email protected]
[email protected]

If you need me to resend it again by adding you in To line, please kindly let me know.

Thanks

maintainer
#12 lore raw
Quoted 14 lines · Nicolin Chen
Quoted 9 lines · Dmitry Osipenko

25.11.2020 00:21, Nicolin Chen пишет:

Quoted 4 lines

These five patches were acked by Thierry and acked-n-tested by Dmitry a while ago. Would it be possible for you to apply them?

Thanks!

You probably should try to ping Will Deacon.

https://lkml.org/lkml/2020/11/17/243

Thank you, Dmitry.
--

Quoted 8 lines

Will, would it be possible for you to take these changes?

I sent them on Nov 11 to the following lists:
[email protected]
[email protected]

If you need me to resend it again by adding you in To line, please kindly let me know.

Weird, this ended up in my spam. If you wouldn't mind resending with me on To: then please do that. Then I know I'm looking at the correct version.

Thanks,

Will

#13 lore raw
Quoted 21 lines · Will Deacon
Quoted 20 lines · Nicolin Chen
Quoted 9 lines · Dmitry Osipenko

25.11.2020 00:21, Nicolin Chen пишет:

Quoted 4 lines

These five patches were acked by Thierry and acked-n-tested by Dmitry a while ago. Would it be possible for you to apply them?

Thanks!

You probably should try to ping Will Deacon.

https://lkml.org/lkml/2020/11/17/243

Thank you, Dmitry.
--

Will, would it be possible for you to take these changes?

I sent them on Nov 11 to the following lists:
[email protected]
[email protected]

Quoted 5 lines
Quoted 2 lines

If you need me to resend it again by adding you in To line, please kindly let me know.

Weird, this ended up in my spam. If you wouldn't mind resending with me on To: then please do that. Then I know I'm looking at the correct version.

Resending.

Thanks!