Skip to contentSkip to conversation

arch: pgtable: define MAX_POSSIBLE_PHYSMEM_BITS where needed

PATCH In review Arnd Bergmann 4 participants 4 messages Nov 13, 2020 – Nov 15, 2020

Subsystems (8)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 arch: pgtable: define MAX_POSSIBLE_PHYSMEM_BITS where needed

From: Arnd Bergmann <[email protected]>

Stefan Agner reported a bug when using zsram on 32-bit Arm machines with RAM above the 4GB address boundary:

  Unable to handle kernel NULL pointer dereference at virtual address 00000000
  pgd = a27bd01c
  [00000000] *pgd=236a0003, *pmd=1ffa64003
  Internal error: Oops: 207 [#1] SMP ARM
  Modules linked in: mdio_bcm_unimac(+) brcmfmac cfg80211 brcmutil raspberrypi_hwmon hci_uart crc32_arm_ce bcm2711_thermal phy_generic genet
  CPU: 0 PID: 123 Comm: mkfs.ext4 Not tainted 5.9.6 #1
  Hardware name: BCM2711
  PC is at zs_map_object+0x94/0x338
  LR is at zram_bvec_rw.constprop.0+0x330/0xa64
  pc : [<c0602b38>]    lr : [<c0bda6a0>]    psr: 60000013
  sp : e376bbe0  ip : 00000000  fp : c1e2921c
  r10: 00000002  r9 : c1dda730  r8 : 00000000
  r7 : e8ff7a00  r6 : 00000000  r5 : 02f9ffa0  r4 : e3710000
  r3 : 000fdffe  r2 : c1e0ce80  r1 : ebf979a0  r0 : 00000000
  Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment user
  Control: 30c5383d  Table: 235c2a80  DAC: fffffffd
  Process mkfs.ext4 (pid: 123, stack limit = 0x495a22e6)
  Stack: (0xe376bbe0 to 0xe376c000)

As it turns out, zsram needs to know the maximum memory size, which is defined in MAX_PHYSMEM_BITS when CONFIG_SPARSEMEM is set, or in MAX_POSSIBLE_PHYSMEM_BITS on the x86 architecture.

The same problem will be hit on all 32-bit architectures that have a physical address space larger than 4GB and happen to not enable sparsemem and include asm/sparsemem.h from asm/pgtable.h.

After the initial discussion, I suggested just always defining MAX_POSSIBLE_PHYSMEM_BITS whenever CONFIG_PHYS_ADDR_T_64BIT is set, or provoking a build error otherwise. This addresses all configurations that can currently have this runtime bug, but leaves all other configurations unchanged.

I looked up the possible number of bits in source code and datasheets, here is what I found:

- on ARC, CONFIG_ARC_HAS_PAE40 controls whether 32 or 40 bits are used
- on ARM, CONFIG_LPAE enables 40 bit addressing, without it we never support more than 32 bits, even though supersections in theory allow up to 40 bits as well.
- on MIPS, some MIPS32r1 or later chips support 36 bits, and MIPS32r5 XPA supports up to 60 bits in theory, but 40 bits are more than anyone will ever ship
- On PowerPC, there are three different implementations of 36 bit addressing, but 32-bit is used without CONFIG_PTE_64BIT
- On RISC-V, the normal page table format can support 34 bit addressing. There is no highmem support on RISC-V, so anything above 2GB is unused, but it might be useful to eventually support CONFIG_ZRAM for high pages.

Fixes 61989a80fb3a ("staging: zsmalloc: zsmalloc memory allocation library")
Fixes 02390b87a945 ("mm/zsmalloc: Prepare to variable MAX_PHYSMEM_BITS")
Cc Stefan Agner <[email protected]>
Cc Mike Rapoport <[email protected]>
Cc Kirill A. Shutemov <[email protected]>
Cc Nitin Gupta <[email protected]>
Cc Minchan Kim <[email protected]>
Cc Vineet Gupta <[email protected]>
Cc Russell King <[email protected]>
Cc Thomas Bogendoerfer <[email protected]>
Cc Michael Ellerman <[email protected]>
Cc Benjamin Herrenschmidt <[email protected]>
Cc Paul Mackerras <[email protected]>
Cc Paul Walmsley <[email protected]>
Cc Palmer Dabbelt <[email protected]>
Cc Albert Ou <[email protected]>

---
If everyone is happy with this version, I would suggest merging this as a bugfix through my asm-generic tree for linux-5.10. I originally said I'd send individual patches for each architecture tree, but I now think this is easier and better documents what is going on.

---
 arch/arc/include/asm/pgtable.h               |  2 ++
 arch/arm/include/asm/pgtable-2level.h        |  2 ++
 arch/arm/include/asm/pgtable-3level.h        |  2 ++
 arch/mips/include/asm/pgtable-32.h           |  3 +++
 arch/powerpc/include/asm/book3s/32/pgtable.h |  2 ++
 arch/powerpc/include/asm/nohash/32/pgtable.h |  2 ++
 arch/riscv/include/asm/pgtable-32.h          |  2 ++
 include/linux/pgtable.h                      | 13 +++++++++++++
 8 files changed, 28 insertions(+)
arch/arc/include/asm/pgtable.h +2 -0
index f1ed17edb085..163641726a2b 100644
@@ -134,8 +134,10 @@
 
 #ifdef CONFIG_ARC_HAS_PAE40
 #define PTE_BITS_NON_RWX_IN_PD1	(0xff00000000 | PAGE_MASK | _PAGE_CACHEABLE)
+#define MAX_POSSIBLE_PHYSMEM_BITS 40
 #else
 #define PTE_BITS_NON_RWX_IN_PD1	(PAGE_MASK | _PAGE_CACHEABLE)
+#define MAX_POSSIBLE_PHYSMEM_BITS 32
 #endif
 
 /**************************************************************************
arch/arm/include/asm/pgtable-2level.h +2 -0
index 3502c2f746ca..baf7d0204eb5 100644
@@ -75,6 +75,8 @@
 #define PTE_HWTABLE_OFF		(PTE_HWTABLE_PTRS * sizeof(pte_t))
 #define PTE_HWTABLE_SIZE	(PTRS_PER_PTE * sizeof(u32))
 
+#define MAX_POSSIBLE_PHYSMEM_BITS	32
+
 /*
  * PMD_SHIFT determines the size of the area a second-level page table can map
  * PGDIR_SHIFT determines what a third-level page table entry can map
arch/arm/include/asm/pgtable-3level.h +2 -0
index fbb6693c3352..2b85d175e999 100644
@@ -25,6 +25,8 @@
 #define PTE_HWTABLE_OFF		(0)
 #define PTE_HWTABLE_SIZE	(PTRS_PER_PTE * sizeof(u64))
 
+#define MAX_POSSIBLE_PHYSMEM_BITS 40
+
 /*
  * PGDIR_SHIFT determines the size a top-level page table entry can map.
  */
arch/mips/include/asm/pgtable-32.h +3 -0
index a950fc1ddb4d..6c0532d7b211 100644
@@ -154,6 +154,7 @@ static inline void pmd_clear(pmd_t *pmdp)
 
 #if defined(CONFIG_XPA)
 
+#define MAX_POSSIBLE_PHYSMEM_BITS 40
 #define pte_pfn(x)		(((unsigned long)((x).pte_high >> _PFN_SHIFT)) | (unsigned long)((x).pte_low << _PAGE_PRESENT_SHIFT))
 static inline pte_t
 pfn_pte(unsigned long pfn, pgprot_t prot)
@@ -169,6 +170,7 @@ pfn_pte(unsigned long pfn, pgprot_t prot)
 
 #elif defined(CONFIG_PHYS_ADDR_T_64BIT) && defined(CONFIG_CPU_MIPS32)
 
+#define MAX_POSSIBLE_PHYSMEM_BITS 36
 #define pte_pfn(x)		((unsigned long)((x).pte_high >> 6))
 
 static inline pte_t pfn_pte(unsigned long pfn, pgprot_t prot)
@@ -183,6 +185,7 @@ static inline pte_t pfn_pte(unsigned long pfn, pgprot_t prot)
 
 #else
 
+#define MAX_POSSIBLE_PHYSMEM_BITS 32
 #ifdef CONFIG_CPU_VR41XX
 #define pte_pfn(x)		((unsigned long)((x).pte >> (PAGE_SHIFT + 2)))
 #define pfn_pte(pfn, prot)	__pte(((pfn) << (PAGE_SHIFT + 2)) | pgprot_val(prot))
arch/powerpc/include/asm/book3s/32/pgtable.h +2 -0
index 36443cda8dcf..1376be95e975 100644
@@ -36,8 +36,10 @@ static inline bool pte_user(pte_t pte)
  */
 #ifdef CONFIG_PTE_64BIT
 #define PTE_RPN_MASK	(~((1ULL << PTE_RPN_SHIFT) - 1))
+#define MAX_POSSIBLE_PHYSMEM_BITS 36
 #else
 #define PTE_RPN_MASK	(~((1UL << PTE_RPN_SHIFT) - 1))
+#define MAX_POSSIBLE_PHYSMEM_BITS 32
 #endif
 
 /*
arch/powerpc/include/asm/nohash/32/pgtable.h +2 -0
index ee2243ba96cf..96522f7f0618 100644
@@ -153,8 +153,10 @@ int map_kernel_page(unsigned long va, phys_addr_t pa, pgprot_t prot);
  */
 #if defined(CONFIG_PPC32) && defined(CONFIG_PTE_64BIT)
 #define PTE_RPN_MASK	(~((1ULL << PTE_RPN_SHIFT) - 1))
+#define MAX_POSSIBLE_PHYSMEM_BITS 36
 #else
 #define PTE_RPN_MASK	(~((1UL << PTE_RPN_SHIFT) - 1))
+#define MAX_POSSIBLE_PHYSMEM_BITS 32
 #endif
 
 /*
arch/riscv/include/asm/pgtable-32.h +2 -0
index b0ab66e5fdb1..5b2e79e5bfa5 100644
@@ -14,4 +14,6 @@
 #define PGDIR_SIZE      (_AC(1, UL) << PGDIR_SHIFT)
 #define PGDIR_MASK      (~(PGDIR_SIZE - 1))
 
+#define MAX_POSSIBLE_PHYSMEM_BITS 34
+
 #endif /* _ASM_RISCV_PGTABLE_32_H */
include/linux/pgtable.h +13 -0
index 71125a4676c4..e237004d498d 100644
@@ -1427,6 +1427,19 @@ typedef unsigned int pgtbl_mod_mask;
 
 #endif /* !__ASSEMBLY__ */
 
+#if !defined(MAX_POSSIBLE_PHYSMEM_BITS) && !defined(CONFIG_64BIT)
+#ifdef CONFIG_PHYS_ADDR_T_64BIT
+/*
+ * ZSMALLOC needs to know the highest PFN on 32-bit architectures
+ * with physical address space extension, but falls back to
+ * BITS_PER_LONG otherwise.
+ */
+#error Missing MAX_POSSIBLE_PHYSMEM_BITS definition
+#else
+#define MAX_POSSIBLE_PHYSMEM_BITS 32
+#endif
+#endif
+
 #ifndef has_transparent_hugepage
 #ifdef CONFIG_TRANSPARENT_HUGEPAGE
 #define has_transparent_hugepage() 1
Signature · 1 line
2.27.0
maintainer Acked-by on v1 1/1
#1 lore raw
Quoted 78 lines · Arnd Bergmann

From: Arnd Bergmann <[email protected]>

Stefan Agner reported a bug when using zsram on 32-bit Arm machines with RAM above the 4GB address boundary:

  Unable to handle kernel NULL pointer dereference at virtual address 00000000
  pgd = a27bd01c
  [00000000] *pgd=236a0003, *pmd=1ffa64003
  Internal error: Oops: 207 [#1] SMP ARM
  Modules linked in: mdio_bcm_unimac(+) brcmfmac cfg80211 brcmutil raspberrypi_hwmon hci_uart crc32_arm_ce bcm2711_thermal phy_generic genet
  CPU: 0 PID: 123 Comm: mkfs.ext4 Not tainted 5.9.6 #1
  Hardware name: BCM2711
  PC is at zs_map_object+0x94/0x338
  LR is at zram_bvec_rw.constprop.0+0x330/0xa64
  pc : [<c0602b38>]    lr : [<c0bda6a0>]    psr: 60000013
  sp : e376bbe0  ip : 00000000  fp : c1e2921c
  r10: 00000002  r9 : c1dda730  r8 : 00000000
  r7 : e8ff7a00  r6 : 00000000  r5 : 02f9ffa0  r4 : e3710000
  r3 : 000fdffe  r2 : c1e0ce80  r1 : ebf979a0  r0 : 00000000
  Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment user
  Control: 30c5383d  Table: 235c2a80  DAC: fffffffd
  Process mkfs.ext4 (pid: 123, stack limit = 0x495a22e6)
  Stack: (0xe376bbe0 to 0xe376c000)

As it turns out, zsram needs to know the maximum memory size, which is defined in MAX_PHYSMEM_BITS when CONFIG_SPARSEMEM is set, or in MAX_POSSIBLE_PHYSMEM_BITS on the x86 architecture.

The same problem will be hit on all 32-bit architectures that have a physical address space larger than 4GB and happen to not enable sparsemem and include asm/sparsemem.h from asm/pgtable.h.

After the initial discussion, I suggested just always defining MAX_POSSIBLE_PHYSMEM_BITS whenever CONFIG_PHYS_ADDR_T_64BIT is set, or provoking a build error otherwise. This addresses all configurations that can currently have this runtime bug, but leaves all other configurations unchanged.

I looked up the possible number of bits in source code and datasheets, here is what I found:

- on ARC, CONFIG_ARC_HAS_PAE40 controls whether 32 or 40 bits are used
- on ARM, CONFIG_LPAE enables 40 bit addressing, without it we never support more than 32 bits, even though supersections in theory allow up to 40 bits as well.
- on MIPS, some MIPS32r1 or later chips support 36 bits, and MIPS32r5 XPA supports up to 60 bits in theory, but 40 bits are more than anyone will ever ship
- On PowerPC, there are three different implementations of 36 bit addressing, but 32-bit is used without CONFIG_PTE_64BIT
- On RISC-V, the normal page table format can support 34 bit addressing. There is no highmem support on RISC-V, so anything above 2GB is unused, but it might be useful to eventually support CONFIG_ZRAM for high pages.

Fixes 61989a80fb3a ("staging: zsmalloc: zsmalloc memory allocation library")
Fixes 02390b87a945 ("mm/zsmalloc: Prepare to variable MAX_PHYSMEM_BITS")
Cc Stefan Agner <[email protected]>
Cc Mike Rapoport <[email protected]>
Cc Kirill A. Shutemov <[email protected]>
Cc Nitin Gupta <[email protected]>
Cc Minchan Kim <[email protected]>
Cc Vineet Gupta <[email protected]>
Cc Russell King <[email protected]>
Cc Thomas Bogendoerfer <[email protected]>
Cc Michael Ellerman <[email protected]>
Cc Benjamin Herrenschmidt <[email protected]>
Cc Paul Mackerras <[email protected]>
Cc Paul Walmsley <[email protected]>
Cc Palmer Dabbelt <[email protected]>
Cc Albert Ou <[email protected]>
Quoted 7 lines

---
If everyone is happy with this version, I would suggest merging this as a bugfix through my asm-generic tree for linux-5.10. I originally said I'd send individual patches for each architecture tree, but I now think this is easier and better documents what is going on.

---
 arch/mips/include/asm/pgtable-32.h           |  3 +++

Thomas.

Signature · 2 lines
Crap can work. Given enough thrust pigs will fly, but it's not necessarily a
good idea.                                                [ RFC1925, 2.3 ]
Reviewed-by Tested-by on v1 1/1
#2 lore raw
In reply to Arnd Bergmann
Quoted 86 lines · Arnd Bergmann

From: Arnd Bergmann <[email protected]>

Stefan Agner reported a bug when using zsram on 32-bit Arm machines with RAM above the 4GB address boundary:

  Unable to handle kernel NULL pointer dereference at virtual address 00000000
  pgd = a27bd01c
  [00000000] *pgd=236a0003, *pmd=1ffa64003
  Internal error: Oops: 207 [#1] SMP ARM
  Modules linked in: mdio_bcm_unimac(+) brcmfmac cfg80211 brcmutil
raspberrypi_hwmon hci_uart crc32_arm_ce bcm2711_thermal phy_generic
genet
  CPU: 0 PID: 123 Comm: mkfs.ext4 Not tainted 5.9.6 #1
  Hardware name: BCM2711
  PC is at zs_map_object+0x94/0x338
  LR is at zram_bvec_rw.constprop.0+0x330/0xa64
  pc : [<c0602b38>]    lr : [<c0bda6a0>]    psr: 60000013
  sp : e376bbe0  ip : 00000000  fp : c1e2921c
  r10: 00000002  r9 : c1dda730  r8 : 00000000
  r7 : e8ff7a00  r6 : 00000000  r5 : 02f9ffa0  r4 : e3710000
  r3 : 000fdffe  r2 : c1e0ce80  r1 : ebf979a0  r0 : 00000000
  Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment user
  Control: 30c5383d  Table: 235c2a80  DAC: fffffffd
  Process mkfs.ext4 (pid: 123, stack limit = 0x495a22e6)
  Stack: (0xe376bbe0 to 0xe376c000)

As it turns out, zsram needs to know the maximum memory size, which is defined in MAX_PHYSMEM_BITS when CONFIG_SPARSEMEM is set, or in MAX_POSSIBLE_PHYSMEM_BITS on the x86 architecture.

The same problem will be hit on all 32-bit architectures that have a physical address space larger than 4GB and happen to not enable sparsemem and include asm/sparsemem.h from asm/pgtable.h.

After the initial discussion, I suggested just always defining MAX_POSSIBLE_PHYSMEM_BITS whenever CONFIG_PHYS_ADDR_T_64BIT is set, or provoking a build error otherwise. This addresses all configurations that can currently have this runtime bug, but leaves all other configurations unchanged.

I looked up the possible number of bits in source code and datasheets, here is what I found:

- on ARC, CONFIG_ARC_HAS_PAE40 controls whether 32 or 40 bits are used
- on ARM, CONFIG_LPAE enables 40 bit addressing, without it we never support more than 32 bits, even though supersections in theory allow up to 40 bits as well.
- on MIPS, some MIPS32r1 or later chips support 36 bits, and MIPS32r5 XPA supports up to 60 bits in theory, but 40 bits are more than anyone will ever ship
- On PowerPC, there are three different implementations of 36 bit addressing, but 32-bit is used without CONFIG_PTE_64BIT
- On RISC-V, the normal page table format can support 34 bit addressing. There is no highmem support on RISC-V, so anything above 2GB is unused, but it might be useful to eventually support CONFIG_ZRAM for high pages.

Fixes 61989a80fb3a ("staging: zsmalloc: zsmalloc memory allocation library")
Fixes 02390b87a945 ("mm/zsmalloc: Prepare to variable MAX_PHYSMEM_BITS")
Cc Stefan Agner <[email protected]>
Cc Mike Rapoport <[email protected]>
Cc Kirill A. Shutemov <[email protected]>
Cc Nitin Gupta <[email protected]>
Cc Minchan Kim <[email protected]>
Cc Vineet Gupta <[email protected]>
Cc Russell King <[email protected]>
Cc Thomas Bogendoerfer <[email protected]>
Cc Michael Ellerman <[email protected]>
Cc Benjamin Herrenschmidt <[email protected]>
Cc Paul Mackerras <[email protected]>
Cc Paul Walmsley <[email protected]>
Cc Palmer Dabbelt <[email protected]>
Cc Albert Ou <[email protected]>

Link:
https://lore.kernel.org/linux-mm/bdfa44bf1c570b05d6c70898e2bbb0acf234ecdf.1604762181.git.stefan@agner.ch/

---
If everyone is happy with this version, I would suggest merging this as a bugfix through my asm-generic tree for linux-5.10. I originally said I'd send individual patches for each architecture tree, but I now think this is easier and better documents what is going on.

Quoted 4 lines
---
 arch/arc/include/asm/pgtable.h               |  2 ++
 arch/arm/include/asm/pgtable-2level.h        |  2 ++
 arch/arm/include/asm/pgtable-3level.h        |  2 ++

Tested, it fixed the issue on my test system, thanks!

For ARM:

--
Stefan

Quoted 151 lines
 arch/mips/include/asm/pgtable-32.h           |  3 +++
 arch/powerpc/include/asm/book3s/32/pgtable.h |  2 ++
 arch/powerpc/include/asm/nohash/32/pgtable.h |  2 ++
 arch/riscv/include/asm/pgtable-32.h          |  2 ++
 include/linux/pgtable.h                      | 13 +++++++++++++
 8 files changed, 28 insertions(+)
arch/arc/include/asm/pgtable.h +2 -0
index f1ed17edb085..163641726a2b 100644
@@ -134,8 +134,10 @@
 
 #ifdef CONFIG_ARC_HAS_PAE40
 #define PTE_BITS_NON_RWX_IN_PD1	(0xff00000000 | PAGE_MASK | _PAGE_CACHEABLE)
+#define MAX_POSSIBLE_PHYSMEM_BITS 40
 #else
 #define PTE_BITS_NON_RWX_IN_PD1	(PAGE_MASK | _PAGE_CACHEABLE)
+#define MAX_POSSIBLE_PHYSMEM_BITS 32
 #endif
 
 /**************************************************************************
arch/arm/include/asm/pgtable-2level.h +2 -0
index 3502c2f746ca..baf7d0204eb5 100644
@@ -75,6 +75,8 @@
 #define PTE_HWTABLE_OFF		(PTE_HWTABLE_PTRS * sizeof(pte_t))
 #define PTE_HWTABLE_SIZE	(PTRS_PER_PTE * sizeof(u32))
 
+#define MAX_POSSIBLE_PHYSMEM_BITS	32
+
 /*
  * PMD_SHIFT determines the size of the area a second-level page table can map
  * PGDIR_SHIFT determines what a third-level page table entry can map
arch/arm/include/asm/pgtable-3level.h +2 -0
index fbb6693c3352..2b85d175e999 100644
@@ -25,6 +25,8 @@
 #define PTE_HWTABLE_OFF		(0)
 #define PTE_HWTABLE_SIZE	(PTRS_PER_PTE * sizeof(u64))
 
+#define MAX_POSSIBLE_PHYSMEM_BITS 40
+
 /*
  * PGDIR_SHIFT determines the size a top-level page table entry can map.
  */
arch/mips/include/asm/pgtable-32.h +1 -0
index a950fc1ddb4d..6c0532d7b211 100644
@@ -154,6 +154,7 @@ static inline void pmd_clear(pmd_t *pmdp)
 
 #if defined(CONFIG_XPA)
 
+#define MAX_POSSIBLE_PHYSMEM_BITS 40
 #define pte_pfn(x)		(((unsigned long)((x).pte_high >> _PFN_SHIFT)) |
 (unsigned long)((x).pte_low << _PAGE_PRESENT_SHIFT))
 static inline pte_t

pfn_pte(unsigned long pfn, pgprot_t prot)

arch/mips/include/asm/pgtable-32.h +2 -0
@@ -169,6 +170,7 @@ pfn_pte(unsigned long pfn, pgprot_t prot)
 
 #elif defined(CONFIG_PHYS_ADDR_T_64BIT) && defined(CONFIG_CPU_MIPS32)
 
+#define MAX_POSSIBLE_PHYSMEM_BITS 36
 #define pte_pfn(x)		((unsigned long)((x).pte_high >> 6))
 
 static inline pte_t pfn_pte(unsigned long pfn, pgprot_t prot)
@@ -183,6 +185,7 @@ static inline pte_t pfn_pte(unsigned long pfn,
 pgprot_t prot)
 
 #else
 
+#define MAX_POSSIBLE_PHYSMEM_BITS 32
 #ifdef CONFIG_CPU_VR41XX
 #define pte_pfn(x)		((unsigned long)((x).pte >> (PAGE_SHIFT + 2)))

#define pfn_pte(pfn, prot) __pte(((pfn) << (PAGE_SHIFT + 2)) |
pgprot_val(prot))

arch/powerpc/include/asm/book3s/32/pgtable.h +2 -0
index 36443cda8dcf..1376be95e975 100644
@@ -36,8 +36,10 @@ static inline bool pte_user(pte_t pte)
  */
 #ifdef CONFIG_PTE_64BIT
 #define PTE_RPN_MASK	(~((1ULL << PTE_RPN_SHIFT) - 1))
+#define MAX_POSSIBLE_PHYSMEM_BITS 36
 #else
 #define PTE_RPN_MASK	(~((1UL << PTE_RPN_SHIFT) - 1))
+#define MAX_POSSIBLE_PHYSMEM_BITS 32
 #endif
 
 /*
arch/powerpc/include/asm/nohash/32/pgtable.h +2 -0
index ee2243ba96cf..96522f7f0618 100644
@@ -153,8 +153,10 @@ int map_kernel_page(unsigned long va, phys_addr_t
 pa, pgprot_t prot);
  */
 #if defined(CONFIG_PPC32) && defined(CONFIG_PTE_64BIT)
 #define PTE_RPN_MASK	(~((1ULL << PTE_RPN_SHIFT) - 1))
+#define MAX_POSSIBLE_PHYSMEM_BITS 36
 #else
 #define PTE_RPN_MASK	(~((1UL << PTE_RPN_SHIFT) - 1))
+#define MAX_POSSIBLE_PHYSMEM_BITS 32
 #endif
 

/*

arch/riscv/include/asm/pgtable-32.h +2 -0
index b0ab66e5fdb1..5b2e79e5bfa5 100644
@@ -14,4 +14,6 @@
 #define PGDIR_SIZE      (_AC(1, UL) << PGDIR_SHIFT)
 #define PGDIR_MASK      (~(PGDIR_SIZE - 1))
 
+#define MAX_POSSIBLE_PHYSMEM_BITS 34
+
 #endif /* _ASM_RISCV_PGTABLE_32_H */
include/linux/pgtable.h +13 -0
index 71125a4676c4..e237004d498d 100644
@@ -1427,6 +1427,19 @@ typedef unsigned int pgtbl_mod_mask;
 
 #endif /* !__ASSEMBLY__ */
 
+#if !defined(MAX_POSSIBLE_PHYSMEM_BITS) && !defined(CONFIG_64BIT)
+#ifdef CONFIG_PHYS_ADDR_T_64BIT
+/*
+ * ZSMALLOC needs to know the highest PFN on 32-bit architectures
+ * with physical address space extension, but falls back to
+ * BITS_PER_LONG otherwise.
+ */
+#error Missing MAX_POSSIBLE_PHYSMEM_BITS definition
+#else
+#define MAX_POSSIBLE_PHYSMEM_BITS 32
+#endif
+#endif
+
 #ifndef has_transparent_hugepage
 #ifdef CONFIG_TRANSPARENT_HUGEPAGE
 #define has_transparent_hugepage() 1
reviewer Acked-by on v1 1/1
#3 lore raw
In reply to Arnd Bergmann
Quoted 70 lines · Arnd Bergmann

From: Arnd Bergmann <[email protected]>

Stefan Agner reported a bug when using zsram on 32-bit Arm machines with RAM above the 4GB address boundary:

  Unable to handle kernel NULL pointer dereference at virtual address 00000000
  pgd = a27bd01c
  [00000000] *pgd=236a0003, *pmd=1ffa64003
  Internal error: Oops: 207 [#1] SMP ARM
  Modules linked in: mdio_bcm_unimac(+) brcmfmac cfg80211 brcmutil raspberrypi_hwmon hci_uart crc32_arm_ce bcm2711_thermal phy_generic genet
  CPU: 0 PID: 123 Comm: mkfs.ext4 Not tainted 5.9.6 #1
  Hardware name: BCM2711
  PC is at zs_map_object+0x94/0x338
  LR is at zram_bvec_rw.constprop.0+0x330/0xa64
  pc : [<c0602b38>]    lr : [<c0bda6a0>]    psr: 60000013
  sp : e376bbe0  ip : 00000000  fp : c1e2921c
  r10: 00000002  r9 : c1dda730  r8 : 00000000
  r7 : e8ff7a00  r6 : 00000000  r5 : 02f9ffa0  r4 : e3710000
  r3 : 000fdffe  r2 : c1e0ce80  r1 : ebf979a0  r0 : 00000000
  Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment user
  Control: 30c5383d  Table: 235c2a80  DAC: fffffffd
  Process mkfs.ext4 (pid: 123, stack limit = 0x495a22e6)
  Stack: (0xe376bbe0 to 0xe376c000)

As it turns out, zsram needs to know the maximum memory size, which is defined in MAX_PHYSMEM_BITS when CONFIG_SPARSEMEM is set, or in MAX_POSSIBLE_PHYSMEM_BITS on the x86 architecture.

The same problem will be hit on all 32-bit architectures that have a physical address space larger than 4GB and happen to not enable sparsemem and include asm/sparsemem.h from asm/pgtable.h.

After the initial discussion, I suggested just always defining MAX_POSSIBLE_PHYSMEM_BITS whenever CONFIG_PHYS_ADDR_T_64BIT is set, or provoking a build error otherwise. This addresses all configurations that can currently have this runtime bug, but leaves all other configurations unchanged.

I looked up the possible number of bits in source code and datasheets, here is what I found:

- on ARC, CONFIG_ARC_HAS_PAE40 controls whether 32 or 40 bits are used
- on ARM, CONFIG_LPAE enables 40 bit addressing, without it we never support more than 32 bits, even though supersections in theory allow up to 40 bits as well.
- on MIPS, some MIPS32r1 or later chips support 36 bits, and MIPS32r5 XPA supports up to 60 bits in theory, but 40 bits are more than anyone will ever ship
- On PowerPC, there are three different implementations of 36 bit addressing, but 32-bit is used without CONFIG_PTE_64BIT
- On RISC-V, the normal page table format can support 34 bit addressing. There is no highmem support on RISC-V, so anything above 2GB is unused, but it might be useful to eventually support CONFIG_ZRAM for high pages.

Fixes 61989a80fb3a ("staging: zsmalloc: zsmalloc memory allocation library")
Fixes 02390b87a945 ("mm/zsmalloc: Prepare to variable MAX_PHYSMEM_BITS")
Cc Stefan Agner <[email protected]>
Cc Mike Rapoport <[email protected]>
Cc Kirill A. Shutemov <[email protected]>
Cc Nitin Gupta <[email protected]>
Cc Minchan Kim <[email protected]>
Cc Vineet Gupta <[email protected]>
Cc Russell King <[email protected]>
Cc Thomas Bogendoerfer <[email protected]>
Cc Michael Ellerman <[email protected]>
Cc Benjamin Herrenschmidt <[email protected]>
Quoted 8 lines
Quoted 153 lines

---
If everyone is happy with this version, I would suggest merging this as a bugfix through my asm-generic tree for linux-5.10. I originally said I'd send individual patches for each architecture tree, but I now think this is easier and better documents what is going on.

---
 arch/arc/include/asm/pgtable.h               |  2 ++
 arch/arm/include/asm/pgtable-2level.h        |  2 ++
 arch/arm/include/asm/pgtable-3level.h        |  2 ++
 arch/mips/include/asm/pgtable-32.h           |  3 +++
 arch/powerpc/include/asm/book3s/32/pgtable.h |  2 ++
 arch/powerpc/include/asm/nohash/32/pgtable.h |  2 ++
 arch/riscv/include/asm/pgtable-32.h          |  2 ++
 include/linux/pgtable.h                      | 13 +++++++++++++
 8 files changed, 28 insertions(+)
arch/arc/include/asm/pgtable.h +2 -0
index f1ed17edb085..163641726a2b 100644
@@ -134,8 +134,10 @@
 
 #ifdef CONFIG_ARC_HAS_PAE40
 #define PTE_BITS_NON_RWX_IN_PD1	(0xff00000000 | PAGE_MASK | _PAGE_CACHEABLE)
+#define MAX_POSSIBLE_PHYSMEM_BITS 40
 #else
 #define PTE_BITS_NON_RWX_IN_PD1	(PAGE_MASK | _PAGE_CACHEABLE)
+#define MAX_POSSIBLE_PHYSMEM_BITS 32
 #endif
 
 /**************************************************************************
arch/arm/include/asm/pgtable-2level.h +2 -0
index 3502c2f746ca..baf7d0204eb5 100644
@@ -75,6 +75,8 @@
 #define PTE_HWTABLE_OFF		(PTE_HWTABLE_PTRS * sizeof(pte_t))
 #define PTE_HWTABLE_SIZE	(PTRS_PER_PTE * sizeof(u32))
 
+#define MAX_POSSIBLE_PHYSMEM_BITS	32
+
 /*
  * PMD_SHIFT determines the size of the area a second-level page table can map
  * PGDIR_SHIFT determines what a third-level page table entry can map
arch/arm/include/asm/pgtable-3level.h +2 -0
index fbb6693c3352..2b85d175e999 100644
@@ -25,6 +25,8 @@
 #define PTE_HWTABLE_OFF		(0)
 #define PTE_HWTABLE_SIZE	(PTRS_PER_PTE * sizeof(u64))
 
+#define MAX_POSSIBLE_PHYSMEM_BITS 40
+
 /*
  * PGDIR_SHIFT determines the size a top-level page table entry can map.
  */
arch/mips/include/asm/pgtable-32.h +3 -0
index a950fc1ddb4d..6c0532d7b211 100644
@@ -154,6 +154,7 @@ static inline void pmd_clear(pmd_t *pmdp)
 
 #if defined(CONFIG_XPA)
 
+#define MAX_POSSIBLE_PHYSMEM_BITS 40
 #define pte_pfn(x)		(((unsigned long)((x).pte_high >> _PFN_SHIFT)) | (unsigned long)((x).pte_low << _PAGE_PRESENT_SHIFT))
 static inline pte_t
 pfn_pte(unsigned long pfn, pgprot_t prot)
@@ -169,6 +170,7 @@ pfn_pte(unsigned long pfn, pgprot_t prot)
 
 #elif defined(CONFIG_PHYS_ADDR_T_64BIT) && defined(CONFIG_CPU_MIPS32)
 
+#define MAX_POSSIBLE_PHYSMEM_BITS 36
 #define pte_pfn(x)		((unsigned long)((x).pte_high >> 6))
 
 static inline pte_t pfn_pte(unsigned long pfn, pgprot_t prot)
@@ -183,6 +185,7 @@ static inline pte_t pfn_pte(unsigned long pfn, pgprot_t prot)
 
 #else
 
+#define MAX_POSSIBLE_PHYSMEM_BITS 32
 #ifdef CONFIG_CPU_VR41XX
 #define pte_pfn(x)		((unsigned long)((x).pte >> (PAGE_SHIFT + 2)))
 #define pfn_pte(pfn, prot)	__pte(((pfn) << (PAGE_SHIFT + 2)) | pgprot_val(prot))
arch/powerpc/include/asm/book3s/32/pgtable.h +2 -0
index 36443cda8dcf..1376be95e975 100644
@@ -36,8 +36,10 @@ static inline bool pte_user(pte_t pte)
  */
 #ifdef CONFIG_PTE_64BIT
 #define PTE_RPN_MASK	(~((1ULL << PTE_RPN_SHIFT) - 1))
+#define MAX_POSSIBLE_PHYSMEM_BITS 36
 #else
 #define PTE_RPN_MASK	(~((1UL << PTE_RPN_SHIFT) - 1))
+#define MAX_POSSIBLE_PHYSMEM_BITS 32
 #endif
 
 /*
arch/powerpc/include/asm/nohash/32/pgtable.h +2 -0
index ee2243ba96cf..96522f7f0618 100644
@@ -153,8 +153,10 @@ int map_kernel_page(unsigned long va, phys_addr_t pa, pgprot_t prot);
  */
 #if defined(CONFIG_PPC32) && defined(CONFIG_PTE_64BIT)
 #define PTE_RPN_MASK	(~((1ULL << PTE_RPN_SHIFT) - 1))
+#define MAX_POSSIBLE_PHYSMEM_BITS 36
 #else
 #define PTE_RPN_MASK	(~((1UL << PTE_RPN_SHIFT) - 1))
+#define MAX_POSSIBLE_PHYSMEM_BITS 32
 #endif
 
 /*
arch/riscv/include/asm/pgtable-32.h +2 -0
index b0ab66e5fdb1..5b2e79e5bfa5 100644
@@ -14,4 +14,6 @@
 #define PGDIR_SIZE      (_AC(1, UL) << PGDIR_SHIFT)
 #define PGDIR_MASK      (~(PGDIR_SIZE - 1))
 
+#define MAX_POSSIBLE_PHYSMEM_BITS 34
+
 #endif /* _ASM_RISCV_PGTABLE_32_H */
include/linux/pgtable.h +13 -0
index 71125a4676c4..e237004d498d 100644
@@ -1427,6 +1427,19 @@ typedef unsigned int pgtbl_mod_mask;
 
 #endif /* !__ASSEMBLY__ */
 
+#if !defined(MAX_POSSIBLE_PHYSMEM_BITS) && !defined(CONFIG_64BIT)
+#ifdef CONFIG_PHYS_ADDR_T_64BIT
+/*
+ * ZSMALLOC needs to know the highest PFN on 32-bit architectures
+ * with physical address space extension, but falls back to
+ * BITS_PER_LONG otherwise.
+ */
+#error Missing MAX_POSSIBLE_PHYSMEM_BITS definition
+#else
+#define MAX_POSSIBLE_PHYSMEM_BITS 32
+#endif
+#endif
+
 #ifndef has_transparent_hugepage
 #ifdef CONFIG_TRANSPARENT_HUGEPAGE
 #define has_transparent_hugepage() 1
Signature · 1 line
2.27.0
Signature · 2 lines
Sincerely yours,
Mike.