crypto: qat - add qat_4xxx driver
cover crypto: qat - add qat_4xxx driver
Add support for QAT 4xxx devices.
The first patch reworks the logic that loads the firmware images to allow for for devices that require multiple firmware images to work. The second patch introduces an hook to program the vector routing table, which is introduced in QAT 4XXX, to allow to change the vector associated with the interrupt source.
The third patch implements the QAT 4xxx driver.
Giovanni Cabiddu (3):
crypto: qat - target fw images to specific AEs
crypto: qat - add hook to initialize vector routing table
crypto: qat - add qat_4xxx driver
drivers/crypto/qat/Kconfig | 11 + drivers/crypto/qat/Makefile | 1 + drivers/crypto/qat/qat_4xxx/Makefile | 4 + .../crypto/qat/qat_4xxx/adf_4xxx_hw_data.c | 218 ++++++++++++ .../crypto/qat/qat_4xxx/adf_4xxx_hw_data.h | 75 ++++ drivers/crypto/qat/qat_4xxx/adf_drv.c | 320 ++++++++++++++++++ drivers/crypto/qat/qat_common/Makefile | 1 + .../crypto/qat/qat_common/adf_accel_devices.h | 5 + .../crypto/qat/qat_common/adf_accel_engine.c | 58 +++- .../crypto/qat/qat_common/adf_cfg_common.h | 3 +- .../crypto/qat/qat_common/adf_gen4_hw_data.c | 101 ++++++ .../crypto/qat/qat_common/adf_gen4_hw_data.h | 99 ++++++ drivers/crypto/qat/qat_common/adf_isr.c | 3 + 13 files changed, 893 insertions(+), 6 deletions(-) create mode 100644 drivers/crypto/qat/qat_4xxx/Makefile create mode 100644 drivers/crypto/qat/qat_4xxx/adf_4xxx_hw_data.c create mode 100644 drivers/crypto/qat/qat_4xxx/adf_4xxx_hw_data.h create mode 100644 drivers/crypto/qat/qat_4xxx/adf_drv.c create mode 100644 drivers/crypto/qat/qat_common/adf_gen4_hw_data.c create mode 100644 drivers/crypto/qat/qat_common/adf_gen4_hw_data.h
Signature · 1 line
2.28.0
PATCH 1/3 crypto: qat - target fw images to specific AEs
Introduce support for devices that require multiple firmware images. If a device requires more than a firmware image to operate, load the image to the appropriate Acceleration Engine (AE).
--- .../crypto/qat/qat_common/adf_accel_devices.h | 3 + .../crypto/qat/qat_common/adf_accel_engine.c | 58 +++++++++++++++++-- 2 files changed, 56 insertions(+), 5 deletions(-)
drivers/crypto/qat/qat_common/adf_accel_devices.h +3 -0
@@ -175,6 +175,9 @@ struct adf_hw_device_data {void (*enable_ints)(struct adf_accel_dev *accel_dev);int (*enable_vf2pf_comms)(struct adf_accel_dev *accel_dev);void (*reset_device)(struct adf_accel_dev *accel_dev); +char *(*uof_get_name)(u32 obj_num); +u32 (*uof_get_num_objs)(void); +u32 (*uof_get_ae_mask)(u32 obj_num);struct adf_hw_csr_ops csr_ops;const char *fw_name;const char *fw_mmp_name;
drivers/crypto/qat/qat_common/adf_accel_engine.c +53 -5
80 lines not on this page · raw message
Signature · 1 line
2.28.0
PATCH 2/3 crypto: qat - add hook to initialize vector routing table
In reply to Giovanni CabidduAdd an hook to initialize the vector routing table with the default values before MSIx is enabled.
The new function set_msix_rttable() is called only if present in the struct adf_hw_device_data of the device. This is to allow for QAT devices that do not support that functionality.
--- drivers/crypto/qat/qat_common/adf_accel_devices.h | 1 + drivers/crypto/qat/qat_common/adf_isr.c | 3 +++ 2 files changed, 4 insertions(+)
drivers/crypto/qat/qat_common/adf_accel_devices.h +1 -0
@@ -175,6 +175,7 @@ struct adf_hw_device_data {void (*enable_ints)(struct adf_accel_dev *accel_dev);int (*enable_vf2pf_comms)(struct adf_accel_dev *accel_dev);void (*reset_device)(struct adf_accel_dev *accel_dev); +void (*set_msix_rttable)(struct adf_accel_dev *accel_dev);char *(*uof_get_name)(u32 obj_num);u32 (*uof_get_num_objs)(void);u32 (*uof_get_ae_mask)(u32 obj_num);
drivers/crypto/qat/qat_common/adf_isr.c +3 -0
@@ -21,6 +21,9 @@ static int adf_enable_msix(struct adf_accel_dev *accel_dev)struct adf_hw_device_data *hw_data = accel_dev->hw_device;u32 msix_num_entries =1 ; +if (hw_data->set_msix_rttable) + hw_data->set_msix_rttable (accel_dev); +/* If SR-IOV is disabled, add entries for each bank */ if (!accel_dev->pf.vf_info) {int i;
Signature · 1 line
2.28.0
PATCH 3/3 crypto: qat - add qat_4xxx driver
In reply to Giovanni CabidduAdd support for QAT 4xxx devices.
--- drivers/crypto/qat/Kconfig | 11 + drivers/crypto/qat/Makefile | 1 + drivers/crypto/qat/qat_4xxx/Makefile | 4 + .../crypto/qat/qat_4xxx/adf_4xxx_hw_data.c | 218 ++++++++++++ .../crypto/qat/qat_4xxx/adf_4xxx_hw_data.h | 75 ++++ drivers/crypto/qat/qat_4xxx/adf_drv.c | 320 ++++++++++++++++++ drivers/crypto/qat/qat_common/Makefile | 1 + .../crypto/qat/qat_common/adf_accel_devices.h | 1 + .../crypto/qat/qat_common/adf_cfg_common.h | 3 +- .../crypto/qat/qat_common/adf_gen4_hw_data.c | 101 ++++++ .../crypto/qat/qat_common/adf_gen4_hw_data.h | 99 ++++++ 11 files changed, 833 insertions(+), 1 deletion(-) create mode 100644 drivers/crypto/qat/qat_4xxx/Makefile create mode 100644 drivers/crypto/qat/qat_4xxx/adf_4xxx_hw_data.c create mode 100644 drivers/crypto/qat/qat_4xxx/adf_4xxx_hw_data.h create mode 100644 drivers/crypto/qat/qat_4xxx/adf_drv.c create mode 100644 drivers/crypto/qat/qat_common/adf_gen4_hw_data.c create mode 100644 drivers/crypto/qat/qat_common/adf_gen4_hw_data.h
drivers/crypto/qat/Kconfig +11 -0
@@ -46,6 +46,17 @@ config CRYPTO_DEV_QAT_C62X To compile this as a module, choose M here: the module will be called qat_c62x. +config CRYPTO_DEV_QAT_4XXX + tristate "Support for Intel(R) QAT_4XXX" + depends on X86 && PCI + select CRYPTO_DEV_QAT + help + Support for Intel(R) QuickAssist Technology QAT_4xxx + for accelerating crypto and compression workloads. + + To compile this as a module, choose M here: the module + will be called qat_4xxx. + config CRYPTO_DEV_QAT_DH895xCCVF tristate "Support for Intel(R) DH895xCC Virtual Function" depends on X86 && PCI
drivers/crypto/qat/Makefile +1 -0
@@ -3,6 +3,7 @@ obj-$(CONFIG_CRYPTO_DEV_QAT) += qat_common/ obj-$(CONFIG_CRYPTO_DEV_QAT_DH895xCC) += qat_dh895xcc/ obj-$(CONFIG_CRYPTO_DEV_QAT_C3XXX) += qat_c3xxx/ obj-$(CONFIG_CRYPTO_DEV_QAT_C62X) += qat_c62x/ +obj-$(CONFIG_CRYPTO_DEV_QAT_4XXX) += qat_4xxx/ obj-$(CONFIG_CRYPTO_DEV_QAT_DH895xCCVF) += qat_dh895xccvf/ obj-$(CONFIG_CRYPTO_DEV_QAT_C3XXXVF) += qat_c3xxxvf/ obj-$(CONFIG_CRYPTO_DEV_QAT_C62XVF) += qat_c62xvf/
drivers/crypto/qat/qat_4xxx/Makefile new file +4 -0
@@ -0,0 +1,4 @@ +# SPDX-License-Identifier: (BSD-3-Clause OR GPL-2.0-only) +ccflags-y := -I $(srctree)/$(src)/../qat_common +obj-$(CONFIG_CRYPTO_DEV_QAT_4XXX) += qat_4xxx.o +qat_4xxx-objs := adf_drv.o adf_4xxx_hw_data.o
drivers/crypto/qat/qat_4xxx/adf_4xxx_hw_data.c new file +218 -0
218 lines not on this page · raw message
drivers/crypto/qat/qat_4xxx/adf_4xxx_hw_data.h new file +75 -0
75 lines not on this page · raw message
drivers/crypto/qat/qat_4xxx/adf_drv.c new file +320 -0
320 lines not on this page · raw message
drivers/crypto/qat/qat_common/Makefile +1 -0
@@ -11,6 +11,7 @@ intel_qat-objs := adf_cfg.o \ adf_admin.o \ adf_hw_arbiter.o \ adf_gen2_hw_data.o \ + adf_gen4_hw_data.o \ qat_crypto.o \ qat_algs.o \ qat_asym_algs.o \
drivers/crypto/qat/qat_common/adf_accel_devices.h +1 -0
@@ -15,6 +15,7 @@#define ADF_C62XVF_DEVICE_NAME "c6xxvf"#define ADF_C3XXX_DEVICE_NAME "c3xxx"#define ADF_C3XXXVF_DEVICE_NAME "c3xxxvf" +#define ADF_4XXX_DEVICE_NAME "4xxx"#define ADF_4XXX_PCI_DEVICE_ID 0x4940#define ADF_4XXXIOV_PCI_DEVICE_ID 0x4941#define ADF_ERRSOU3 (0x3A000 + 0x0C)
drivers/crypto/qat/qat_common/adf_cfg_common.h +2 -1
@@ -32,7 +32,8 @@ enum adf_device_type {DEV_C62X ,DEV_C62XVF ,DEV_C3XXX , -DEV_C3XXXVF +DEV_C3XXXVF , + DEV_4XXX, }; struct adf_dev_status_info {
drivers/crypto/qat/qat_common/adf_gen4_hw_data.c new file +101 -0
101 lines not on this page · raw message
drivers/crypto/qat/qat_common/adf_gen4_hw_data.h new file +99 -0
99 lines not on this page · raw message
Signature · 1 line
2.28.0
Herbert Xu
maintainerQuoted 26 lines · Giovanni Cabiddu
Add support for QAT 4xxx devices.
The first patch reworks the logic that loads the firmware images to allow for for devices that require multiple firmware images to work. The second patch introduces an hook to program the vector routing table, which is introduced in QAT 4XXX, to allow to change the vector associated with the interrupt source.
The third patch implements the QAT 4xxx driver.Giovanni Cabiddu (3):
crypto: qat - target fw images to specific AEs
crypto: qat - add hook to initialize vector routing table
crypto: qat - addqat_4xxxdriverdrivers/crypto/qat/Kconfig | 11 + drivers/crypto/qat/Makefile | 1 + drivers/crypto/qat/qat_4xxx/Makefile | 4 + .../crypto/qat/qat_4xxx/adf_4xxx_hw_data.c | 218 ++++++++++++ .../crypto/qat/qat_4xxx/adf_4xxx_hw_data.h | 75 ++++ drivers/crypto/qat/qat_4xxx/adf_drv.c | 320 ++++++++++++++++++ drivers/crypto/qat/qat_common/Makefile | 1 + .../crypto/qat/qat_common/adf_accel_devices.h | 5 + .../crypto/qat/qat_common/adf_accel_engine.c | 58 +++- .../crypto/qat/qat_common/adf_cfg_common.h | 3 +- .../crypto/qat/qat_common/adf_gen4_hw_data.c | 101 ++++++ .../crypto/qat/qat_common/adf_gen4_hw_data.h | 99 ++++++
Quoted 8 lines
drivers/crypto/qat/qat_common/adf_isr.c | 3 + 13 files changed, 893 insertions(+), 6 deletions(-) create mode 100644 drivers/crypto/qat/qat_4xxx/Makefile create mode 100644 drivers/crypto/qat/qat_4xxx/adf_4xxx_hw_data.c create mode 100644 drivers/crypto/qat/qat_4xxx/adf_4xxx_hw_data.h create mode 100644 drivers/crypto/qat/qat_4xxx/adf_drv.c create mode 100644 drivers/crypto/qat/qat_common/adf_gen4_hw_data.c create mode 100644 drivers/crypto/qat/qat_common/adf_gen4_hw_data.h
All applied. Thanks.
Signature · 3 lines
Email: Herbert Xu <[email protected]> Home Page: http://gondor.apana.org.au/~herbert/ PGP Key: http://gondor.apana.org.au/~herbert/pubkey.txt