arm64: dts: freescale: update calibration table for TMU module
Subsystems (2)
PATCH 1/2 arm64: dts: freescale: update calibration table for TMU module
From: Yuantian Tang <[email protected]>
Update the calibration table to make the temperature more accurate. Three platforms have been updated: ls1012a, ls1043a and ls1046a.
Signed-off-by Yuantian Tang <[email protected]>
--- .../arm64/boot/dts/freescale/fsl-ls1012a.dtsi | 63 ++++++++------- .../arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 78 ++++++++++--------- .../arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 72 +++++++++-------- 3 files changed, 112 insertions(+), 101 deletions(-)
arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi +33 -30
@@ -293,43 +293,46 @@ compatible = "fsl,qoriq-tmu"; reg = <0x0 0x1f00000 0x0 0x10000>; interrupts = <0 33 0x4>; - fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x30062>; - fsl,tmu-calibration = <0x00000000 0x00000026 - 0x00000001 0x0000002d + fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x60062>; + fsl,tmu-calibration = <0x00000000 0x00000025 + 0x00000001 0x0000002c 0x00000002 0x00000032 0x00000003 0x00000039 0x00000004 0x0000003f 0x00000005 0x00000046 - 0x00000006 0x0000004d - 0x00000007 0x00000054 - 0x00000008 0x0000005a - 0x00000009 0x00000061 - 0x0000000a 0x0000006a - 0x0000000b 0x00000071 - - 0x00010000 0x00000025 - 0x00010001 0x0000002c + 0x00000006 0x0000004c + 0x00000007 0x00000053 + 0x00000008 0x00000059 + 0x00000009 0x0000005f + 0x0000000a 0x00000066 + 0x0000000b 0x0000006c + + 0x00010000 0x00000026 + 0x00010001 0x0000002d 0x00010002 0x00000035 0x00010003 0x0000003d 0x00010004 0x00000045 - 0x00010005 0x0000004e - 0x00010006 0x00000057 - 0x00010007 0x00000061 - 0x00010008 0x0000006b - 0x00010009 0x00000076 - - 0x00020000 0x00000029 - 0x00020001 0x00000033 - 0x00020002 0x0000003d - 0x00020003 0x00000049 - 0x00020004 0x00000056 - 0x00020005 0x00000061 - 0x00020006 0x0000006d - - 0x00030000 0x00000021 - 0x00030001 0x0000002a - 0x00030002 0x0000003c - 0x00030003 0x0000004e>; + 0x00010005 0x0000004d + 0x00010006 0x00000055 + 0x00010007 0x0000005d + 0x00010008 0x00000065 + 0x00010009 0x0000006d + + 0x00020000 0x00000026 + 0x00020001 0x00000030 + 0x00020002 0x0000003a + 0x00020003 0x00000044 + 0x00020004 0x0000004e + 0x00020005 0x00000059 + 0x00020006 0x00000063 + + 0x00030000 0x00000014 + 0x00030001 0x00000021 + 0x00030002 0x0000002e + 0x00030003 0x0000003a + 0x00030004 0x00000047 + 0x00030005 0x00000053 + 0x00030006 0x00000060>; big-endian; #thermal-sensor-cells = <1>; };
arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi +41 -37
84 lines not on this page · raw message
arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi +38 -34
83 lines not on this page · raw message
Signature · 1 line
2.17.1
PATCH 2/2 ARM: dts: ls1021a: update calibration table for TMU module
From: Yuantian Tang <[email protected]>
Update the calibration table to make the temperature more accurate.
Signed-off-by Yuantian Tang <[email protected]>
--- arch/arm/boot/dts/ls1021a.dtsi | 77 ++++++++++++++++------------------ 1 file changed, 37 insertions(+), 40 deletions(-)
arch/arm/boot/dts/ls1021a.dtsi +37 -40
@@ -288,46 +288,43 @@ compatible = "fsl,qoriq-tmu"; reg = <0x0 0x1f00000 0x0 0x10000>; interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; - fsl,tmu-range = <0xb0000 0xa0026 0x80048 0x30061>; - fsl,tmu-calibration = <0x00000000 0x0000000f - 0x00000001 0x00000017 - 0x00000002 0x0000001e - 0x00000003 0x00000026 - 0x00000004 0x0000002e - 0x00000005 0x00000035 - 0x00000006 0x0000003d - 0x00000007 0x00000044 - 0x00000008 0x0000004c - 0x00000009 0x00000053 - 0x0000000a 0x0000005b - 0x0000000b 0x00000064 - - 0x00010000 0x00000011 - 0x00010001 0x0000001c - 0x00010002 0x00000024 - 0x00010003 0x0000002b - 0x00010004 0x00000034 - 0x00010005 0x00000039 - 0x00010006 0x00000042 - 0x00010007 0x0000004c - 0x00010008 0x00000051 - 0x00010009 0x0000005a - 0x0001000a 0x00000063 - - 0x00020000 0x00000013 - 0x00020001 0x00000019 - 0x00020002 0x00000024 - 0x00020003 0x0000002c - 0x00020004 0x00000035 - 0x00020005 0x0000003d - 0x00020006 0x00000046 - 0x00020007 0x00000050 - 0x00020008 0x00000059 - - 0x00030000 0x00000002 - 0x00030001 0x0000000d - 0x00030002 0x00000019 - 0x00030003 0x00000024>; + fsl,tmu-range = <0xb0000 0x9002c 0x6004e 0x30066>; + fsl,tmu-calibration = <0x00000000 0x00000020 + 0x00000001 0x00000024 + 0x00000002 0x0000002a + 0x00000003 0x00000032 + 0x00000004 0x00000038 + 0x00000005 0x0000003e + 0x00000006 0x00000043 + 0x00000007 0x0000004a + 0x00000008 0x00000050 + 0x00000009 0x00000059 + 0x0000000a 0x0000005f + 0x0000000b 0x00000066 + + 0x00010000 0x00000023 + 0x00010001 0x0000002b + 0x00010002 0x00000033 + 0x00010003 0x0000003a + 0x00010004 0x00000042 + 0x00010005 0x0000004a + 0x00010006 0x00000054 + 0x00010007 0x0000005c + 0x00010008 0x00000065 + 0x00010009 0x0000006f + + 0x00020000 0x00000029 + 0x00020001 0x00000033 + 0x00020002 0x0000003d + 0x00020003 0x00000048 + 0x00020004 0x00000054 + 0x00020005 0x00000060 + 0x00020006 0x0000006c + + 0x00030000 0x00000025 + 0x00030001 0x00000033 + 0x00030002 0x00000043 + 0x00030003 0x00000055>; #thermal-sensor-cells = <1>; };
Signature · 1 line
2.17.1
Shawn Guo
AppliedQuoted 6 lines · On Tue, Nov 17, 2020 at 11:43:04AM +0800, [email protected] wrote:
From: Yuantian Tang <[email protected]>
Update the calibration table to make the temperature more accurate. Three platforms have been updated: ls1012a, ls1043a and ls1046a.
Signed-off-by Yuantian Tang <[email protected]>
Applied both, thanks.