Skip to contentSkip to conversation

media: meson: Add support for the Amlogic GE2D Accelerator Unit

PATCH Superseded Neil Armstrong 4 participants 13 messages Nov 17, 2020 – Dec 8, 2020

Subsystems (4)

v3 of 4 Superseded Latest is v4 →

lore
Share & tools
lore
#0 lore raw

v3 cover media: meson: Add support for the Amlogic GE2D Accelerator Unit

The GE2D is a 2D accelerator with various features like configurable blitter with alpha blending, frame rotation, scaling, format conversion and colorspace conversion.

The driver implements a Memory2Memory VB2 V4L2 streaming device permitting:
- 0, 90, 180, 270deg rotation
- horizontal/vertical flipping
- source cropping
- destination compositing
- 32bit/24bit/16bit format conversion

This adds the support for the GE2D version found in the AXG SoCs Family.

The missing features are:
- Source scaling
- Colorspace conversion
- Advanced alpha blending & blitting options

Dependencies:
- Patches 1-3: None
- Patch 4: https://lkml.kernel.org/r/[email protected] (applied for 5.11)

Changes since v2:
- removed error check in and after get_frame()
- moved the v4l2_file_operations lower in the code to avoid adding vidioc_setup_cap_fmt on top
- removed all memcpy of pix_fmt
- simplified & fixed ge2d_start_streaming
- added local buffer type check in vidioc_g_selection instead of using get_frame error
- removed impossible <0 rectangle check, fixed error string
- added comment on condition after V4L2_CID_ROTATE

Changes since v1:
- Rebased on v5.10-rc1

/ # v4l2-compliance -s
v4l2-compliance SHA: ea16a7ef13a902793a5c2626b0cefc4d956147f3, 64 bits, 64-bit time_t

Compliance test for meson-ge2d device /dev/video0:

Driver Info:

	Driver name      : meson-ge2d
	Card type        : meson-ge2d
	Bus info         : platform:meson-ge2d
	Driver version   : 5.9.0
	Capabilities     : 0x84208000

Video Memory-to-Memory
Streaming
Extended Pix Format
Device Capabilities
Device Caps : 0x04208000
Video Memory-to-Memory
Streaming
Extended Pix Format

Required ioctls:
test VIDIOC_QUERYCAP: OK

Allow for multiple opens:
test second /dev/video0 open: OK
test VIDIOC_QUERYCAP: OK
test VIDIOC_G/S_PRIORITY: OK
test for unlimited opens: OK

test invalid ioctls: OK
Debug ioctls:
test VIDIOC_DBG_G/S_REGISTER: OK test VIDIOC_LOG_STATUS: OK (Not Supported)

Input ioctls:
test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported) test VIDIOC_G/S_FREQUENCY: OK (Not Supported) test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported) test VIDIOC_ENUMAUDIO: OK (Not Supported)
test VIDIOC_G/S/ENUMINPUT: OK (Not Supported) test VIDIOC_G/S_AUDIO: OK (Not Supported)
Inputs: 0 Audio Inputs: 0 Tuners: 0

Output ioctls:
test VIDIOC_G/S_MODULATOR: OK (Not Supported) test VIDIOC_G/S_FREQUENCY: OK (Not Supported) test VIDIOC_ENUMAUDOUT: OK (Not Supported) test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported) test VIDIOC_G/S_AUDOUT: OK (Not Supported)
Outputs: 0 Audio Outputs: 0 Modulators: 0

Input/Output configuration ioctls:
test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported) test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported) test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported) test VIDIOC_G/S_EDID: OK (Not Supported)

Control ioctls:
test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK test VIDIOC_QUERYCTRL: OK
test VIDIOC_G/S_CTRL: OK
test VIDIOC_G/S/TRY_EXT_CTRLS: OK test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK test VIDIOC_G/S_JPEGCOMP: OK (Not Supported) Standard Controls: 4 Private Controls: 0

Format ioctls:
test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK test VIDIOC_G/S_PARM: OK (Not Supported) test VIDIOC_G_FBUF: OK (Not Supported) test VIDIOC_G_FMT: OK
test VIDIOC_TRY_FMT: OK
test VIDIOC_S_FMT: OK
test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported) test Cropping: OK
test Composing: OK
test Scaling: OK (Not Supported)

Codec ioctls:
test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported) test VIDIOC_G_ENC_INDEX: OK (Not Supported) test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)

Buffer ioctls:
test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK test VIDIOC_EXPBUF: OK
test Requests: OK (Not Supported)

Test input 0:

Streaming ioctls:
test read/write: OK (Not Supported)
test blocking wait: OK
Video Capture: Captured 58 buffers
test MMAP (no poll): OK
Video Capture: Captured 58 buffers
test MMAP (select): OK
Video Capture: Captured 58 buffers
test MMAP (epoll): OK
test USERPTR (no poll): OK (Not Supported) test USERPTR (select): OK (Not Supported) test DMABUF: Cannot test, specify --expbuf-device

Total for meson-ge2d device /dev/video0: 52, Succeeded: 52, Failed: 0, Warnings: 0

Neil Armstrong (4):
dt-bindings: media: Add bindings for the Amlogic GE2D Accelerator Unit
media: meson: Add M2M driver for the Amlogic GE2D Accelerator Unit
MAINTAINERS: Add myself as maintainer of the Amlogic GE2D driver
arm64: dts: meson-axg: add GE2D node

 .../bindings/media/amlogic,axg-ge2d.yaml      |   47 +
 MAINTAINERS                                   |    9 +
 arch/arm64/boot/dts/amlogic/meson-axg.dtsi    |    9 +
 drivers/media/platform/Kconfig                |   13 +
 drivers/media/platform/Makefile               |    2 +
 drivers/media/platform/meson/ge2d/Makefile    |    3 +
 drivers/media/platform/meson/ge2d/ge2d-regs.h |  360 ++++++
 drivers/media/platform/meson/ge2d/ge2d.c      | 1091 +++++++++++++++++
 8 files changed, 1534 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/amlogic,axg-ge2d.yaml
 create mode 100644 drivers/media/platform/meson/ge2d/Makefile
 create mode 100644 drivers/media/platform/meson/ge2d/ge2d-regs.h
 create mode 100644 drivers/media/platform/meson/ge2d/ge2d.c
Signature · 7 lines
2.25.1


_______________________________________________
linux-amlogic mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-amlogic
#1 lore raw

PATCH v3 1/4 dt-bindings: media: Add bindings for the Amlogic GE2D Accelerator Unit

The GE2D is a 2D accelerator with various features like configurable blitter with alpha blending, frame rotation, scaling, format conversion and colorspace conversion.

This adds the bindings for the GE2D version found in the AXG SoCs Family.

---
 .../bindings/media/amlogic,axg-ge2d.yaml      | 47 +++++++++++++++++++
 1 file changed, 47 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/amlogic,axg-ge2d.yaml
Documentation/devicetree/bindings/media/amlogic,axg-ge2d.yaml new file +47 -0
new file mode 100644
index 000000000000..bee93bd84771
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2020 BayLibre, SAS
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/media/amlogic,axg-ge2d.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Amlogic GE2D Acceleration Unit
+
+maintainers:
+  - Neil Armstrong <[email protected]>
+
+properties:
+  compatible:
+    enum:
+      - amlogic,axg-ge2d
+
+  interrupts:
+    minItems: 1
+
+  reg:
+    minItems: 1
+
+  resets:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    ge2d: ge2d@ff940000 {
+          compatible = "amlogic,axg-ge2d";
+          reg = <0xff940000 0x10000>;
+          interrupts = <150>;
+          clocks = <&clk_ge2d>;
+          resets = <&reset_ge2d>;
+    };
Signature · 7 lines
2.25.1


_______________________________________________
linux-amlogic mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-amlogic
#2 lore raw

PATCH v3 2/4 media: meson: Add M2M driver for the Amlogic GE2D Accelerator Unit

In reply to Neil Armstrong

The GE2D is a 2D accelerator with various features like configurable blitter with alpha blending, frame rotation, scaling, format conversion and colorspace conversion.

The driver implements a Memory2Memory VB2 V4L2 streaming device permitting:
- 0, 90, 180, 270deg rotation
- horizontal/vertical flipping
- source cropping
- destination compositing
- 32bit/24bit/16bit format conversion

This adds the support for the GE2D version found in the AXG SoCs Family.

The missing features are:
- Source scaling
- Colorspace conversion
- Advanced alpha blending & blitting options

Is passes v4l2-compliance SHA: ea16a7ef13a902793a5c2626b0cefc4d956147f3, 64 bits, 64-bit time_t

---
 drivers/media/platform/Kconfig                |   13 +
 drivers/media/platform/Makefile               |    2 +
 drivers/media/platform/meson/ge2d/Makefile    |    3 +
 drivers/media/platform/meson/ge2d/ge2d-regs.h |  360 ++++++
 drivers/media/platform/meson/ge2d/ge2d.c      | 1091 +++++++++++++++++
 5 files changed, 1469 insertions(+)
 create mode 100644 drivers/media/platform/meson/ge2d/Makefile
 create mode 100644 drivers/media/platform/meson/ge2d/ge2d-regs.h
 create mode 100644 drivers/media/platform/meson/ge2d/ge2d.c
drivers/media/platform/Kconfig +13 -0
index a3cb104956d5..0522a5a76b86 100644
@@ -274,6 +274,19 @@ config VIDEO_MEM2MEM_DEINTERLACE
 	help
 	    Generic deinterlacing V4L2 driver.
 
+config VIDEO_MESON_GE2D
+	tristate "Amlogic 2D Graphic Acceleration Unit"
+	depends on VIDEO_DEV && VIDEO_V4L2
+	depends on ARCH_MESON || COMPILE_TEST
+	select VIDEOBUF2_DMA_CONTIG
+	select V4L2_MEM2MEM_DEV
+	help
+	  This is a v4l2 driver for Amlogic GE2D 2D graphics accelerator.
+	  GE2D is a standalone 2D graphic acceleration unit, with color converter,
+	  image scaling, BitBLT & alpha blending operations.
+
+	  To compile this driver as a module choose m here.
+
 config VIDEO_SAMSUNG_S5P_G2D
 	tristate "Samsung S5P and EXYNOS4 G2D 2d graphics accelerator driver"
 	depends on VIDEO_DEV && VIDEO_V4L2
drivers/media/platform/Makefile +2 -0
index 62b6cdc8c730..d47e0dcc65d7 100644
@@ -80,3 +80,5 @@ obj-$(CONFIG_VIDEO_QCOM_CAMSS)		+= qcom/camss/
 obj-$(CONFIG_VIDEO_QCOM_VENUS)		+= qcom/venus/
 
 obj-y					+= sunxi/
+
+obj-$(CONFIG_VIDEO_MESON_GE2D)		+= meson/ge2d/
drivers/media/platform/meson/ge2d/Makefile new file +3 -0
new file mode 100644
index 000000000000..450586df27d7
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+obj-$(CONFIG_VIDEO_MESON_GE2D) += ge2d.o
drivers/media/platform/meson/ge2d/ge2d-regs.h new file +360 -0

360 lines not on this page · raw message

drivers/media/platform/meson/ge2d/ge2d.c new file +1091 -0

1,091 lines not on this page · raw message

Signature · 1 line
2.25.1
#3 lore raw

Re: [PATCH v3 2/4] media: meson: Add M2M driver for the Amlogic GE2D Accelerator Unit

Quoted 469 lines · Neil Armstrong

The GE2D is a 2D accelerator with various features like configurable blitter with alpha blending, frame rotation, scaling, format conversion and colorspace conversion.

The driver implements a Memory2Memory VB2 V4L2 streaming device permitting:
- 0, 90, 180, 270deg rotation
- horizontal/vertical flipping
- source cropping
- destination compositing
- 32bit/24bit/16bit format conversion

This adds the support for the GE2D version found in the AXG SoCs Family.

The missing features are:
- Source scaling
- Colorspace conversion
- Advanced alpha blending & blitting options

Is passes v4l2-compliance SHA: ea16a7ef13a902793a5c2626b0cefc4d956147f3, 64 bits, 64-bit time_t

---
 drivers/media/platform/Kconfig                |   13 +
 drivers/media/platform/Makefile               |    2 +
 drivers/media/platform/meson/ge2d/Makefile    |    3 +
 drivers/media/platform/meson/ge2d/ge2d-regs.h |  360 ++++++
 drivers/media/platform/meson/ge2d/ge2d.c      | 1091 +++++++++++++++++
 5 files changed, 1469 insertions(+)
 create mode 100644 drivers/media/platform/meson/ge2d/Makefile
 create mode 100644 drivers/media/platform/meson/ge2d/ge2d-regs.h
 create mode 100644 drivers/media/platform/meson/ge2d/ge2d.c
drivers/media/platform/Kconfig +13 -0
index a3cb104956d5..0522a5a76b86 100644
@@ -274,6 +274,19 @@ config VIDEO_MEM2MEM_DEINTERLACE
 	help
 	    Generic deinterlacing V4L2 driver.
 
+config VIDEO_MESON_GE2D
+	tristate "Amlogic 2D Graphic Acceleration Unit"
+	depends on VIDEO_DEV && VIDEO_V4L2
+	depends on ARCH_MESON || COMPILE_TEST
+	select VIDEOBUF2_DMA_CONTIG
+	select V4L2_MEM2MEM_DEV
+	help
+	  This is a v4l2 driver for Amlogic GE2D 2D graphics accelerator.
+	  GE2D is a standalone 2D graphic acceleration unit, with color converter,
+	  image scaling, BitBLT & alpha blending operations.
+
+	  To compile this driver as a module choose m here.
+
 config VIDEO_SAMSUNG_S5P_G2D
 	tristate "Samsung S5P and EXYNOS4 G2D 2d graphics accelerator driver"
 	depends on VIDEO_DEV && VIDEO_V4L2
drivers/media/platform/Makefile +2 -0
index 62b6cdc8c730..d47e0dcc65d7 100644
@@ -80,3 +80,5 @@ obj-$(CONFIG_VIDEO_QCOM_CAMSS)		+= qcom/camss/
 obj-$(CONFIG_VIDEO_QCOM_VENUS)		+= qcom/venus/
 
 obj-y					+= sunxi/
+
+obj-$(CONFIG_VIDEO_MESON_GE2D)		+= meson/ge2d/
drivers/media/platform/meson/ge2d/Makefile new file +3 -0
new file mode 100644
index 000000000000..450586df27d7
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+obj-$(CONFIG_VIDEO_MESON_GE2D) += ge2d.o
drivers/media/platform/meson/ge2d/ge2d-regs.h new file +360 -0
new file mode 100644
index 000000000000..2a76dd4c0ccb
@@ -0,0 +1,360 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (C) 2020 BayLibre, SAS
+ * Author: Neil Armstrong <[email protected]>
+ * Copyright (C) 2017 Amlogic, Inc. All rights reserved.
+ */
+
+#ifndef __GE2D_REGS__
+#define __GE2D_REGS__
+
+/* Registers starts at (GE2D_REG(0x8a0 * 4) */
+#define GE2D_REG(x) ((0x8a0 + (x)) * 4)
+
+#define GE2D_GEN_CTRL0 GE2D_REG(0x00)
+
+#define GE2D_DST_BYTEMASK_ONLY		BIT(31)
+#define GE2D_DST_BITMASK_EN		BIT(30)
+#define GE2D_SRC2_KEY_EN		BIT(29)
+#define GE2D_SRC2_KEY_MODE		BIT(28)
+#define GE2D_SRC1_KEY_EN		BIT(27)
+#define GE2D_SRC1_KEY_MODE		BIT(26)
+#define GE2D_DST1_8B_MODE_SEL		GENMASK(25, 24)
+#define GE2D_DST_CLIP_MODE		BIT(23)
+#define GE2D_SRC2_8B_MODE_SEL		GENMASK(16, 15)
+#define GE2D_SRC2_FILL_MODE		BIT(14)
+#define GE2D_SRC2_PIC_STRUCT		GENMASK(13, 12)
+#define GE2D_SRC2_X_YC_RATIO		BIT(11)
+#define GE2D_SRC1_8B_MODE_SEL		GENMASK(6, 5)
+#define GE2D_SRC1_FILL_MODE		BIT(4)
+#define GE2D_SRC1_LUT_EN		BIT(3)
+#define GE2D_SRC1_PIC_STRUCT		GENMASK(2, 1)
+
+#define GE2D_GEN_CTRL1 GE2D_REG(0x01)
+
+#define GE2D_SOFT_RST			BIT(31)
+#define GE2D_DST_WRITE_RESP_CNT_RST	BIT(30)
+#define GE2D_DST_WRITE_RESP_CNT_ADD_DIS	BIT(29)
+#define GE2D_COLOR_CONVERSION_MODE1	BIT(26)
+#define GE2D_INTERRUPT_CTRL		GENMASK(25, 24)
+#define GE2D_SRC2_BURST_SIZE_CTRL	GENMASK(23, 22)
+#define GE2D_SRC1_BURST_SIZE_CTRL	GENMASK(21, 16)
+#define GE2D_DST1_PIC_STRUCT		GENMASK(15, 14)
+#define GE2D_SRC_RD_CTRL		GENMASK(13, 12)
+#define GE2D_DST2_URGENT_EN		BIT(11)
+#define GE2D_SRC1_URGENT_EN		BIT(10)
+#define GE2D_SRC2_URGENT_EN		BIT(9)
+#define GE2D_DST1_URGENT_EN		BIT(8)
+#define GE2D_SRC1_GB_ALPHA		GENMASK(7, 0)
+
+#define GE2D_GEN_CTRL2 GE2D_REG(0x02)
+
+#define GE2D_ALPHA_CONVERSION_MODE0	BIT(31)
+#define GE2D_COLOR_CONVERSION_MODE0	BIT(30)
+#define GE2D_SRC1_GB_ALPHA_EN		BIT(29)
+#define GE2D_DST1_COLOR_ROUND_MODE	BIT(28)
+#define GE2D_SRC2_COLOR_EXPAND_MODE	BIT(27)
+#define GE2D_SRC2_ALPHA_EXPAND_MODE	BIT(26)
+#define GE2D_SRC1_COLOR_EXPAND_MODE	BIT(25)
+#define GE2D_SRC1_ALPHA_EXPAND_MODE	BIT(24)
+#define GE2D_DST_LITTLE_ENDIAN		BIT(23)
+#define GE2D_DST1_COLOR_MAP		GENMASK(22, 19)
+#define GE2D_ALU_MULT_MODE		BIT(18)
+#define GE2D_DST1_FORMAT		GENMASK(17, 16)
+#define GE2D_SRC2_LITTLE_ENDIAN		BIT(15)
+#define GE2D_SRC2_COLOR_MAP		GENMASK(14, 11)
+#define GE2D_ALPHA_CONVERSION_MODE1	BIT(10)
+#define GE2D_SRC2_FORMAT		GENMASK(9, 8)
+#define GE2D_SRC1_LITTLE_ENDIAN		BIT(7)
+#define GE2D_SRC1_COLOR_MAP		GENMASK(6, 3)
+#define GE2D_SRC1_DEEPCOLOR		BIT(2)
+#define GE2D_SRC1_FORMAT		GENMASK(1, 0)
+
+#define GE2D_FORMAT_8BIT	0
+#define GE2D_FORMAT_16BIT	1
+#define GE2D_FORMAT_24BIT	2
+#define GE2D_FORMAT_32BIT	3
+
+/* 16 bit */
+#define GE2D_COLOR_MAP_YUV422		0
+#define GE2D_COLOR_MAP_RGB655		1
+#define GE2D_COLOR_MAP_YUV655		1
+#define GE2D_COLOR_MAP_RGB844		2
+#define GE2D_COLOR_MAP_YUV844		2
+#define GE2D_COLOR_MAP_RGBA6442		3
+#define GE2D_COLOR_MAP_YUVA6442		3
+#define GE2D_COLOR_MAP_RGBA4444		4
+#define GE2D_COLOR_MAP_YUVA4444		4
+#define GE2D_COLOR_MAP_RGB565		5
+#define GE2D_COLOR_MAP_YUV565		5
+#define GE2D_COLOR_MAP_ARGB4444		6
+#define GE2D_COLOR_MAP_AYUV4444		6
+#define GE2D_COLOR_MAP_ARGB1555		7
+#define GE2D_COLOR_MAP_AYUV1555		7
+#define GE2D_COLOR_MAP_RGBA4642		8
+#define GE2D_COLOR_MAP_YUVA4642		8
+
+/* 24 bit */
+#define GE2D_COLOR_MAP_RGB888		0
+#define GE2D_COLOR_MAP_YUV444		0
+#define GE2D_COLOR_MAP_RGBA5658		1
+#define GE2D_COLOR_MAP_YUVA5658		1
+#define GE2D_COLOR_MAP_ARGB8565		2
+#define GE2D_COLOR_MAP_AYUV8565		2
+#define GE2D_COLOR_MAP_RGBA6666		3
+#define GE2D_COLOR_MAP_YUVA6666		3
+#define GE2D_COLOR_MAP_ARGB6666		4
+#define GE2D_COLOR_MAP_AYUV6666		4
+#define GE2D_COLOR_MAP_BGR888		5
+#define GE2D_COLOR_MAP_VUY888		5
+
+/* 32 bit */
+#define GE2D_COLOR_MAP_RGBA8888		0
+#define GE2D_COLOR_MAP_YUVA8888		0
+#define GE2D_COLOR_MAP_ARGB8888		1
+#define GE2D_COLOR_MAP_AYUV8888		1
+#define GE2D_COLOR_MAP_ABGR8888		2
+#define GE2D_COLOR_MAP_AVUY8888		2
+#define GE2D_COLOR_MAP_BGRA8888		3
+#define GE2D_COLOR_MAP_VUYA8888		3
+
+#define GE2D_CMD_CTRL GE2D_REG(0x03)
+
+#define GE2D_SRC2_FILL_COLOR_EN		BIT(9)
+#define GE2D_SRC1_FILL_COLOR_EN		BIT(8)
+#define GE2D_DST_XY_SWAP		BIT(7)
+#define GE2D_DST_X_REV			BIT(6)
+#define GE2D_DST_Y_REV			BIT(5)
+#define GE2D_SRC2_X_REV			BIT(4)
+#define GE2D_SRC2_Y_REV			BIT(3)
+#define GE2D_SRC1_X_REV			BIT(2)
+#define GE2D_SRC1_Y_REV			BIT(1)
+#define GE2D_CBUS_CMD_WR		BIT(0)
+
+#define GE2D_STATUS0 GE2D_REG(0x04)
+
+#define GE2D_DST_WRITE_RSP_CNT		GENMASK(28, 17)
+#define GE2D_DP_STATUS			GENMASK(16, 7)
+#define GE2D_R1CMD_RDY			BIT(6)
+#define GE2D_R2CMD_RDY			BIT(5)
+#define GE2D_PDPCMD_VALID		BIT(4)
+#define GE2D_DPCMD_RDY			BIT(3)
+#define GE2D_BUF_CMD_VALID		BIT(2)
+#define GE2D_CURR_CMD_VALID		BIT(1)
+#define GE2D_GE2D_BUSY			BIT(0)
+
+#define GE2D_STATUS1 GE2D_REG(0x05)
+
+#define GE2D_WR_DST1_STATUS		GENMASK(29, 16)
+#define GE2D_RD_SRC2_FIFO_EMPTY		BIT(15)
+#define GE2D_RD_SRC2_FIFO_OVERFLOW	BIT(14)
+#define GE2D_RD_SRC2_STATE_Y		GENMASK(13, 12)
+#define GE2D_RD_SRC2_WIN_ERR		BIT(11)
+#define GE2D_RD_SRC2_CMD_BUSY		BIT(10)
+#define GE2D_RD_SRC1_FIFO_EMPTY		BIT(9)
+#define GE2D_RD_SRC1_FIFO_OVERFLOW	BIT(8)
+#define GE2D_RD_SRC1_STATE_CR		GENMASK(7, 6)
+#define GE2D_RD_SRC1_STATE_CB		GENMASK(5, 4)
+#define GE2D_RD_SRC1_STATE_Y		GENMASK(3, 2)
+#define GE2D_RD_SRC1_WIN_ERR		BIT(1)
+#define GE2D_RD_SRC1_CMD_BUSY		BIT(0)
+
+#define GE2D_SRC1_DEF_COLOR GE2D_REG(0x06)
+
+#define GE2D_COLOR_R_Y			GENMASK(31, 24)
+#define GE2D_COLOR_B_CB			GENMASK(23, 16)
+#define GE2D_COLOR_B_CR			GENMASK(15, 8)
+#define GE2D_COLOR_ALPHA		GENMASK(7, 0)
+
+#define GE2D_SRC1_CLIPX_START_END GE2D_REG(0x07)
+
+#define GE2D_START_EXTRA	BIT(31) /* For GE2D_SRC1_CLIPX/Y_START_END */
+#define GE2D_START_EXTRA0	BIT(30)	/* For GE2D_SRC1_X/Y_START_END */
+#define GE2D_START		GENMASK(28, 16)
+#define GE2D_END_EXTRA		BIT(15) /* For GE2D_SRC1_CLIPX/Y_START_END */
+#define GE2D_END_EXTRA0		BIT(14)	/* For GE2D_SRC1_X/Y_START_END */
+#define GE2D_END		GENMASK(12, 0)
+
+#define GE2D_SRC1_CLIPY_START_END GE2D_REG(0x08)
+#define GE2D_SRC1_CANVAS GE2D_REG(0x09)
+
+#define GE2D_SRC1_CANVAS_ADDR	GENMASK(31, 24)
+
+#define GE2D_SRC1_X_START_END GE2D_REG(0x0a)
+#define GE2D_SRC1_Y_START_END GE2D_REG(0x0b)
+#define GE2D_SRC1_LUT_ADDR GE2D_REG(0x0c)
+
+#define GE2D_LUT_READ		BIT(8)
+#define GE2D_LUT_ADDR		GENMASK(7, 0)
+
+#define GE2D_SRC1_LUT_DAT GE2D_REG(0x0d)
+#define GE2D_SRC1_FMT_CTRL GE2D_REG(0x0e)
+#define GE2D_SRC2_DEF_COLOR GE2D_REG(0x0f)
+#define GE2D_SRC2_CLIPX_START_END GE2D_REG(0x10)
+#define GE2D_SRC2_CLIPY_START_END GE2D_REG(0x11)
+#define GE2D_SRC2_X_START_END GE2D_REG(0x12)
+#define GE2D_SRC2_Y_START_END GE2D_REG(0x13)
+#define GE2D_DST_CLIPX_START_END GE2D_REG(0x14)
+#define GE2D_DST_CLIPY_START_END GE2D_REG(0x15)
+#define GE2D_DST_X_START_END GE2D_REG(0x16)
+#define GE2D_DST_Y_START_END GE2D_REG(0x17)
+#define GE2D_SRC2_DST_CANVAS GE2D_REG(0x18)
+
+#define GE2D_DST2_CANVAS_ADDR	GENMASK(23, 16)
+#define GE2D_SRC2_CANVAS_ADDR	GENMASK(15, 8)
+#define GE2D_DST1_CANVAS_ADDR	GENMASK(7, 0)
+
+#define GE2D_VSC_START_PHASE_STEP GE2D_REG(0x19)
+#define GE2D_VSC_PHASE_SLOPE GE2D_REG(0x1a)
+#define GE2D_VSC_INI_CTRL GE2D_REG(0x1b)
+#define GE2D_HSC_START_PHASE_STEP GE2D_REG(0x1c)
+#define GE2D_HSC_PHASE_SLOPE GE2D_REG(0x1d)
+#define GE2D_HSC_INI_CTRL GE2D_REG(0x1e)
+#define GE2D_HSC_ADV_CTRL GE2D_REG(0x1f)
+#define GE2D_SC_MISC_CTRL GE2D_REG(0x20)
+#define GE2D_VSC_NRND_POINT GE2D_REG(0x21)
+#define GE2D_VSC_NRND_PHASE GE2D_REG(0x22)
+#define GE2D_HSC_NRND_POINT GE2D_REG(0x23)
+#define GE2D_HSC_NRND_PHASE GE2D_REG(0x24)
+#define GE2D_MATRIX_PRE_OFFSET GE2D_REG(0x25)
+#define GE2D_MATRIX_COEF00_01 GE2D_REG(0x26)
+#define GE2D_MATRIX_COEF02_10 GE2D_REG(0x27)
+#define GE2D_MATRIX_COEF11_12 GE2D_REG(0x28)
+#define GE2D_MATRIX_COEF20_21 GE2D_REG(0x29)
+#define GE2D_MATRIX_COEF22_CTRL GE2D_REG(0x2a)
+#define GE2D_MATRIX_OFFSET GE2D_REG(0x2b)
+#define GE2D_ALU_OP_CTRL GE2D_REG(0x2c)
+
+#define GE2D_SRC1_COLOR_MULT_ALPHA_SEL	GENMASK(26, 25)
+#define GE2D_SRC2_COLOR_MULT_ALPHA_SEL	BIT(24)
+#define GE2D_ALU_BLEND_MODE		GENMASK(22, 20)
+
+#define OPERATION_ADD           0    /* Cd = Cs*Fs+Cd*Fd */
+#define OPERATION_SUB           1    /* Cd = Cs*Fs-Cd*Fd */
+#define OPERATION_REVERSE_SUB   2    /* Cd = Cd*Fd-Cs*Fs */
+#define OPERATION_MIN           3    /* Cd = Min(Cd*Fd,Cs*Fs) */
+#define OPERATION_MAX           4    /* Cd = Max(Cd*Fd,Cs*Fs) */
+#define OPERATION_LOGIC         5
+
+#define GE2D_ALU_SRC_COLOR_BLEND_FACTOR	GENMASK(19, 16)
+#define GE2D_ALU_DST_COLOR_BLEND_FACTOR	GENMASK(15, 12)
+
+#define COLOR_FACTOR_ZERO                     0
+#define COLOR_FACTOR_ONE                      1
+#define COLOR_FACTOR_SRC_COLOR                2
+#define COLOR_FACTOR_ONE_MINUS_SRC_COLOR      3
+#define COLOR_FACTOR_DST_COLOR                4
+#define COLOR_FACTOR_ONE_MINUS_DST_COLOR      5
+#define COLOR_FACTOR_SRC_ALPHA                6
+#define COLOR_FACTOR_ONE_MINUS_SRC_ALPHA      7
+#define COLOR_FACTOR_DST_ALPHA                8
+#define COLOR_FACTOR_ONE_MINUS_DST_ALPHA      9
+#define COLOR_FACTOR_CONST_COLOR              10
+#define COLOR_FACTOR_ONE_MINUS_CONST_COLOR    11
+#define COLOR_FACTOR_CONST_ALPHA              12
+#define COLOR_FACTOR_ONE_MINUS_CONST_ALPHA    13
+#define COLOR_FACTOR_SRC_ALPHA_SATURATE       14
+
+#define GE2D_ALU_OPERATION_LOGIC	GENMASK(15, 12)
+
+#define LOGIC_OPERATION_CLEAR       0
+#define LOGIC_OPERATION_COPY        1
+#define LOGIC_OPERATION_NOOP        2
+#define LOGIC_OPERATION_SET         3
+#define LOGIC_OPERATION_COPY_INVERT 4
+#define LOGIC_OPERATION_INVERT      5
+#define LOGIC_OPERATION_AND_REVERSE 6
+#define LOGIC_OPERATION_OR_REVERSE  7
+#define LOGIC_OPERATION_AND         8
+#define LOGIC_OPERATION_OR          9
+#define LOGIC_OPERATION_NAND        10
+#define LOGIC_OPERATION_NOR         11
+#define LOGIC_OPERATION_XOR         12
+#define LOGIC_OPERATION_EQUIV       13
+#define LOGIC_OPERATION_AND_INVERT  14
+#define LOGIC_OPERATION_OR_INVERT   15
+
+#define GE2D_ALU_ALPHA_BLEND_MODE	GENMASK(10, 8)
+#define GE2D_ALU_SRC_ALPHA_BLEND_FACTOR	GENMASK(7, 4)
+#define GE2D_ALU_DST_ALPHA_BLEND_FACTOR	GENMASK(3, 0)
+
+#define ALPHA_FACTOR_ZERO                     0
+#define ALPHA_FACTOR_ONE                      1
+#define ALPHA_FACTOR_SRC_ALPHA                2
+#define ALPHA_FACTOR_ONE_MINUS_SRC_ALPHA      3
+#define ALPHA_FACTOR_DST_ALPHA                4
+#define ALPHA_FACTOR_ONE_MINUS_DST_ALPHA      5
+#define ALPHA_FACTOR_CONST_ALPHA              6
+#define ALPHA_FACTOR_ONE_MINUS_CONST_ALPHA    7
+
+#define GE2D_ALU_ALPHA_OPERATION_LOGIC	GENMASK(3, 0)
+
+#define GE2D_ALU_COLOR_OP(__op, __src_factor, __dst_factor) \
+	(FIELD_PREP(GE2D_ALU_BLEND_MODE, __op) | \
+	 FIELD_PREP(GE2D_ALU_SRC_COLOR_BLEND_FACTOR, __src_factor) | \
+	 FIELD_PREP(GE2D_ALU_DST_COLOR_BLEND_FACTOR, __dst_factor))
+
+#define GE2D_ALU_DO_COLOR_OPERATION_LOGIC(__op, __src_factor) \
+	GE2D_ALU_COLOR_OP(OPERATION_LOGIC, __src_factor, __op)
+
+#define GE2D_ALU_ALPHA_OP(__op, __src_factor, __dst_factor) \
+	(FIELD_PREP(GE2D_ALU_ALPHA_BLEND_MODE, __op) | \
+	 FIELD_PREP(GE2D_ALU_SRC_ALPHA_BLEND_FACTOR, __src_factor) | \
+	 FIELD_PREP(GE2D_ALU_DST_ALPHA_BLEND_FACTOR, __dst_factor))
+
+#define GE2D_ALU_DO_ALPHA_OPERATION_LOGIC(__op, __src_factor) \
+	GE2D_ALU_ALPHA_OP(OPERATION_LOGIC, __src_factor, __op)
+
+#define GE2D_ALU_CONST_COLOR GE2D_REG(0x2d)
+#define GE2D_SRC1_KEY GE2D_REG(0x2e)
+#define GE2D_SRC1_KEY_MASK GE2D_REG(0x2f)
+#define GE2D_SRC2_KEY GE2D_REG(0x30)
+#define GE2D_SRC2_KEY_MASK GE2D_REG(0x31)
+#define GE2D_DST_BITMASK GE2D_REG(0x32)
+#define GE2D_DP_ONOFF_CTRL GE2D_REG(0x33)
+#define GE2D_SCALE_COEF_IDX GE2D_REG(0x34)
+#define GE2D_SCALE_COEF GE2D_REG(0x35)
+#define GE2D_SRC_OUTSIDE_ALPHA GE2D_REG(0x36)
+#define GE2D_ANTIFLICK_CTRL0 GE2D_REG(0x38)
+#define GE2D_ANTIFLICK_CTRL1 GE2D_REG(0x39)
+#define GE2D_ANTIFLICK_COLOR_FILT0 GE2D_REG(0x3a)
+#define GE2D_ANTIFLICK_COLOR_FILT1 GE2D_REG(0x3b)
+#define GE2D_ANTIFLICK_COLOR_FILT2 GE2D_REG(0x3c)
+#define GE2D_ANTIFLICK_COLOR_FILT3 GE2D_REG(0x3d)
+#define GE2D_ANTIFLICK_ALPHA_FILT0 GE2D_REG(0x3e)
+#define GE2D_ANTIFLICK_ALPHA_FILT1 GE2D_REG(0x3f)
+#define GE2D_ANTIFLICK_ALPHA_FILT2 GE2D_REG(0x40)
+#define GE2D_ANTIFLICK_ALPHA_FILT3 GE2D_REG(0x41)
+#define GE2D_SRC1_RANGE_MAP_Y_CTRL GE2D_REG(0x43)
+#define GE2D_SRC1_RANGE_MAP_CB_CTRL GE2D_REG(0x44)
+#define GE2D_SRC1_RANGE_MAP_CR_CTRL GE2D_REG(0x45)
+#define GE2D_ARB_BURST_NUM GE2D_REG(0x46)
+#define GE2D_TID_TOKEN GE2D_REG(0x47)
+#define GE2D_GEN_CTRL3 GE2D_REG(0x48)
+
+#define GE2D_DST2_BYTEMASK_VAL		GENMASK(31, 28)
+#define GE2D_DST2_PIC_STRUCT		GENMASK(27, 26)
+#define GE2D_DST2_8B_MODE_SEL		GENMASK(25, 24)
+#define GE2D_DST2_COLOR_MAP		GENMASK(22, 19)
+#define GE2D_DST2_FORMAT		GENMASK(17, 16)
+#define GE2D_DST2_COLOR_ROUND_MODE	BIT(14)
+#define GE2D_DST2_X_DISCARD_MODE	GENMASK(13, 12)
+#define GE2D_DST2_Y_DISCARD_MODE	GENMASK(11, 10)
+#define GE2D_DST2_ENABLE		BIT(8)
+#define GE2D_DST1_X_DISCARD_MODE	GENMASK(5, 4)
+#define GE2D_DST1_Y_DISCARD_MODE	GENMASK(3, 2)
+#define GE2D_DST1_ENABLE		BIT(0)
+
+#define GE2D_STATUS2 GE2D_REG(0x49)
+#define GE2D_GEN_CTRL4 GE2D_REG(0x4a)
+#define GE2D_DST1_BADDR_CTRL  GE2D_REG(0x51)
+#define GE2D_DST1_STRIDE_CTRL GE2D_REG(0x52)
+
+#define GE2D_STRIDE_SIZE	GENMASK(19, 0)
+
+#define GE2D_SRC1_BADDR_CTRL  GE2D_REG(0x53)
+#define GE2D_SRC1_STRIDE_CTRL GE2D_REG(0x54)
+#define GE2D_SRC2_BADDR_CTRL  GE2D_REG(0x55)
+#define GE2D_SRC2_STRIDE_CTRL GE2D_REG(0x56)
+
+#endif /* __GE2D_REGS__ */
drivers/media/platform/meson/ge2d/ge2d.c new file +22 -0
new file mode 100644
index 000000000000..ebef15714af2
@@ -0,0 +1,1091 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2020 BayLibre, SAS
+ * Author: Neil Armstrong <[email protected]>
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/reset.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/timer.h>
+#include <linux/regmap.h>
+
+#include <linux/platform_device.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-event.h>
+#include <media/v4l2-ioctl.h>
+#include <media/v4l2-mem2mem.h>

drivers/media/platform/meson/ge2d/ge2d.c line 32

Quoted 10 lines
drivers/media/platform/meson/ge2d/ge2d.c new file +10 -0
+#include <media/v4l2-ctrls.h>
+#include <media/videobuf2-v4l2.h>
+#include <media/videobuf2-dma-contig.h>
+
+#include "ge2d-regs.h"
+
+#define GE2D_NAME	"meson-ge2d"
+
+#define DEFAULT_WIDTH	100
+#define DEFAULT_HEIGHT	100

That's a weird default value. I would expect to see some multiple of 8 here.

Quoted 348 lines
drivers/media/platform/meson/ge2d/ge2d.c new file +348 -0
+#define DEFAULT_STRIDE	400
+
+#define MAX_WIDTH	8191
+#define MAX_HEIGHT	8191
+
+/*
+ * Missing features:
+ * - Scaling
+ * - Simple 1/2 vertical scaling
+ * - YUV input support
+ * - Source global alpha
+ * - Colorspace conversion
+ */
+
+struct ge2d_fmt {
+	u32 fourcc;
+	bool alpha;
+	bool le;
+	unsigned int depth;
+	unsigned int hw_fmt;
+	unsigned int hw_map;
+};
+
+struct ge2d_frame {
+	struct vb2_v4l2_buffer *buf;
+
+	/* Image Format */
+	struct v4l2_pix_format pix_fmt;
+
+	/* Crop */
+	struct v4l2_rect crop;
+
+	/* Image format */
+	const struct ge2d_fmt *fmt;
+};
+
+struct ge2d_ctx {
+	struct v4l2_fh fh;
+	struct meson_ge2d *ge2d;
+	struct ge2d_frame in;
+	struct ge2d_frame out;
+	struct v4l2_ctrl_handler ctrl_handler;
+
+	bool streamon_out, streamon_cap;
+	unsigned long sequence_out, sequence_cap;
+
+	/* Control values */
+	u32 hflip;
+	u32 vflip;
+	u32 xy_swap;
+};
+
+struct meson_ge2d {
+	struct v4l2_device v4l2_dev;
+	struct v4l2_m2m_dev *m2m_dev;
+	struct video_device *vfd;
+
+	struct device *dev;
+	struct regmap *map;
+	struct clk *clk;
+
+	/* vb2 queue lock */
+	struct mutex mutex;
+	/* device access spinlock */
+	spinlock_t ctrl_lock;
+
+	struct ge2d_ctx *curr;
+};
+
+#define FMT(_fourcc, _alpha, _depth, _map)		\
+{							\
+	.fourcc = _fourcc,				\
+	.alpha = (_alpha),				\
+	.depth = (_depth),				\
+	.hw_fmt = GE2D_FORMAT_ ## _depth ## BIT,	\
+	.hw_map = GE2D_COLOR_MAP_ ## _map,		\
+}
+
+/* TOFIX Handle the YUV input formats */
+static const struct ge2d_fmt formats[] = {
+	/*  FOURCC Alpha  HW FMT  HW MAP */
+	FMT(V4L2_PIX_FMT_XRGB32, false, 32, BGRA8888),
+	FMT(V4L2_PIX_FMT_RGB32, true, 32, BGRA8888),
+	FMT(V4L2_PIX_FMT_ARGB32, true, 32, BGRA8888),
+	FMT(V4L2_PIX_FMT_RGBX32, false, 32, ABGR8888),
+	FMT(V4L2_PIX_FMT_RGBA32, true, 32, ABGR8888),
+	FMT(V4L2_PIX_FMT_BGRX32, false, 32, RGBA8888),
+	FMT(V4L2_PIX_FMT_BGRA32, true, 32, RGBA8888),
+	FMT(V4L2_PIX_FMT_BGR32, true, 32, ARGB8888),
+	FMT(V4L2_PIX_FMT_ABGR32, true, 32, ARGB8888),
+	FMT(V4L2_PIX_FMT_XBGR32, false, 32, ARGB8888),
+
+	FMT(V4L2_PIX_FMT_RGB24, false, 24, BGR888),
+	FMT(V4L2_PIX_FMT_BGR24, false, 24, RGB888),
+
+	FMT(V4L2_PIX_FMT_XRGB555X, false, 16, ARGB1555),
+	FMT(V4L2_PIX_FMT_ARGB555X, true, 16, ARGB1555),
+	FMT(V4L2_PIX_FMT_RGB565, false, 16, RGB565),
+	FMT(V4L2_PIX_FMT_RGBX444, false, 16, RGBA4444),
+	FMT(V4L2_PIX_FMT_RGBA444, true, 16, RGBA4444),
+	FMT(V4L2_PIX_FMT_XRGB444, false, 16, ARGB4444),
+	FMT(V4L2_PIX_FMT_ARGB444, true, 16, ARGB4444),
+};
+
+#define NUM_FORMATS ARRAY_SIZE(formats)
+
+static const struct ge2d_fmt *find_fmt(struct v4l2_format *f)
+{
+	unsigned int i;
+
+	for (i = 0; i < NUM_FORMATS; i++) {
+		if (formats[i].fourcc == f->fmt.pix.pixelformat)
+			return &formats[i];
+	}
+
+	/*
+	 * TRY_FMT/S_FMT should never return an error when the requested format
+	 * is not supported. Drivers should always return a valid format,
+	 * preferably a format that is as widely supported by applications as
+	 * possible.
+	 */
+	return &formats[0];
+}
+
+static struct ge2d_frame *get_frame(struct ge2d_ctx *ctx,
+				    enum v4l2_buf_type type)
+{
+	switch (type) {
+	case V4L2_BUF_TYPE_VIDEO_OUTPUT:
+		return &ctx->in;
+	case V4L2_BUF_TYPE_VIDEO_CAPTURE:
+		return &ctx->out;
+	default:
+		/* This should never happen, warn and return OUTPUT frame */
+		dev_warn(ctx->ge2d->dev, "%s: invalid buffer type\n", __func__);
+		return &ctx->in;
+	}
+}
+
+static void ge2d_hw_start(struct meson_ge2d *ge2d)
+{
+	struct ge2d_ctx *ctx = ge2d->curr;
+	u32 reg;
+
+	/* Reset */
+	regmap_update_bits(ge2d->map, GE2D_GEN_CTRL1,
+			   GE2D_SOFT_RST, GE2D_SOFT_RST);
+	regmap_update_bits(ge2d->map, GE2D_GEN_CTRL1,
+			   GE2D_SOFT_RST, 0);
+
+	usleep_range(100, 200);
+
+	/* Implement CANVAS for non-AXG */
+	regmap_write(ge2d->map, GE2D_SRC1_BADDR_CTRL,
+		     (vb2_dma_contig_plane_dma_addr(&ctx->in.buf->vb2_buf, 0) + 7) >> 3);
+	regmap_write(ge2d->map, GE2D_SRC1_STRIDE_CTRL,
+		     (ctx->in.pix_fmt.bytesperline + 7) >> 3);
+	regmap_write(ge2d->map, GE2D_SRC2_BADDR_CTRL,
+		     (vb2_dma_contig_plane_dma_addr(&ctx->out.buf->vb2_buf, 0) + 7) >> 3);
+	regmap_write(ge2d->map, GE2D_SRC2_STRIDE_CTRL,
+		     (ctx->out.pix_fmt.bytesperline + 7) >> 3);
+	regmap_write(ge2d->map, GE2D_DST1_BADDR_CTRL,
+		     (vb2_dma_contig_plane_dma_addr(&ctx->out.buf->vb2_buf, 0) + 7) >> 3);
+	regmap_write(ge2d->map, GE2D_DST1_STRIDE_CTRL,
+		     (ctx->out.pix_fmt.bytesperline + 7) >> 3);
+
+	regmap_write(ge2d->map, GE2D_GEN_CTRL0, 0);
+	regmap_write(ge2d->map, GE2D_GEN_CTRL1,
+		     FIELD_PREP(GE2D_INTERRUPT_CTRL, 2) |
+		     FIELD_PREP(GE2D_SRC2_BURST_SIZE_CTRL, 3) |
+		     FIELD_PREP(GE2D_SRC1_BURST_SIZE_CTRL, 0x3f));
+
+	regmap_write(ge2d->map, GE2D_GEN_CTRL2,
+		     GE2D_SRC1_LITTLE_ENDIAN |
+		     GE2D_SRC2_LITTLE_ENDIAN |
+		     GE2D_DST_LITTLE_ENDIAN |
+		     FIELD_PREP(GE2D_DST1_COLOR_MAP, ctx->out.fmt->hw_map) |
+		     FIELD_PREP(GE2D_DST1_FORMAT, ctx->out.fmt->hw_fmt) |
+		     FIELD_PREP(GE2D_SRC2_COLOR_MAP, ctx->out.fmt->hw_map) |
+		     FIELD_PREP(GE2D_SRC2_FORMAT, ctx->out.fmt->hw_fmt) |
+		     FIELD_PREP(GE2D_SRC1_COLOR_MAP, ctx->in.fmt->hw_map) |
+		     FIELD_PREP(GE2D_SRC1_FORMAT, ctx->in.fmt->hw_fmt));
+	regmap_write(ge2d->map, GE2D_GEN_CTRL3,
+		     GE2D_DST1_ENABLE);
+
+	regmap_write(ge2d->map, GE2D_SRC1_CLIPY_START_END,
+		     FIELD_PREP(GE2D_START, ctx->in.crop.top) |
+		     FIELD_PREP(GE2D_END, ctx->in.crop.top + ctx->in.crop.height));
+	regmap_write(ge2d->map, GE2D_SRC1_CLIPX_START_END,
+		     FIELD_PREP(GE2D_START, ctx->in.crop.left) |
+		     FIELD_PREP(GE2D_END, ctx->in.crop.left + ctx->in.crop.width));
+	regmap_write(ge2d->map, GE2D_SRC2_CLIPY_START_END,
+		     FIELD_PREP(GE2D_START, ctx->out.crop.top) |
+		     FIELD_PREP(GE2D_END, ctx->out.crop.top + ctx->out.crop.height));
+	regmap_write(ge2d->map, GE2D_SRC2_CLIPX_START_END,
+		     FIELD_PREP(GE2D_START, ctx->out.crop.left) |
+		     FIELD_PREP(GE2D_END, ctx->out.crop.left + ctx->out.crop.width));
+	regmap_write(ge2d->map, GE2D_DST_CLIPY_START_END,
+		     FIELD_PREP(GE2D_START, ctx->out.crop.top) |
+		     FIELD_PREP(GE2D_END, ctx->out.crop.top + ctx->out.crop.height));
+	regmap_write(ge2d->map, GE2D_DST_CLIPX_START_END,
+		     FIELD_PREP(GE2D_START, ctx->out.crop.left) |
+		     FIELD_PREP(GE2D_END, ctx->out.crop.left + ctx->out.crop.width));
+
+	regmap_write(ge2d->map, GE2D_SRC1_Y_START_END,
+		     FIELD_PREP(GE2D_END, ctx->in.pix_fmt.height));
+	regmap_write(ge2d->map, GE2D_SRC1_X_START_END,
+		     FIELD_PREP(GE2D_END, ctx->in.pix_fmt.width));
+	regmap_write(ge2d->map, GE2D_SRC2_Y_START_END,
+		     FIELD_PREP(GE2D_END, ctx->out.pix_fmt.height));
+	regmap_write(ge2d->map, GE2D_SRC2_X_START_END,
+		     FIELD_PREP(GE2D_END, ctx->out.pix_fmt.width));
+	regmap_write(ge2d->map, GE2D_DST_Y_START_END,
+		     FIELD_PREP(GE2D_END, ctx->out.pix_fmt.height));
+	regmap_write(ge2d->map, GE2D_DST_X_START_END,
+		     FIELD_PREP(GE2D_END, ctx->out.pix_fmt.width));
+
+	/* Color, no blend, use source color */
+	reg = GE2D_ALU_DO_COLOR_OPERATION_LOGIC(LOGIC_OPERATION_COPY,
+						COLOR_FACTOR_SRC_COLOR);
+
+	if (ctx->in.fmt->alpha && ctx->out.fmt->alpha)
+		/* Take source alpha */
+		reg |= GE2D_ALU_DO_ALPHA_OPERATION_LOGIC(LOGIC_OPERATION_COPY,
+							 COLOR_FACTOR_SRC_ALPHA);
+	else if (!ctx->out.fmt->alpha)
+		/* Set alpha to 0 */
+		reg |= GE2D_ALU_DO_ALPHA_OPERATION_LOGIC(LOGIC_OPERATION_SET,
+							 COLOR_FACTOR_ZERO);
+	else
+		/* Keep original alpha */
+		reg |= GE2D_ALU_DO_ALPHA_OPERATION_LOGIC(LOGIC_OPERATION_COPY,
+							 COLOR_FACTOR_DST_ALPHA);
+
+	regmap_write(ge2d->map, GE2D_ALU_OP_CTRL, reg);
+
+	/* Start */
+	regmap_write(ge2d->map, GE2D_CMD_CTRL,
+		     (ctx->xy_swap ? GE2D_DST_XY_SWAP : 0) |
+		     (ctx->hflip ? GE2D_SRC1_Y_REV : 0) |
+		     (ctx->vflip ? GE2D_SRC1_X_REV : 0) |
+		     GE2D_CBUS_CMD_WR);
+}
+
+static void device_run(void *priv)
+{
+	struct ge2d_ctx *ctx = priv;
+	struct meson_ge2d *ge2d = ctx->ge2d;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ge2d->ctrl_lock, flags);
+
+	ge2d->curr = ctx;
+
+	ctx->in.buf = v4l2_m2m_next_src_buf(ctx->fh.m2m_ctx);
+	ctx->out.buf = v4l2_m2m_next_dst_buf(ctx->fh.m2m_ctx);
+
+	ge2d_hw_start(ge2d);
+
+	spin_unlock_irqrestore(&ge2d->ctrl_lock, flags);
+}
+
+static irqreturn_t ge2d_isr(int irq, void *priv)
+{
+	struct meson_ge2d *ge2d = priv;
+	u32 intr;
+
+	regmap_read(ge2d->map, GE2D_STATUS0, &intr);
+
+	if (!(intr & GE2D_GE2D_BUSY)) {
+		struct vb2_v4l2_buffer *src, *dst;
+		struct ge2d_ctx *ctx = ge2d->curr;
+
+		ge2d->curr = NULL;
+
+		src = v4l2_m2m_src_buf_remove(ctx->fh.m2m_ctx);
+		dst = v4l2_m2m_dst_buf_remove(ctx->fh.m2m_ctx);
+
+		src->sequence = ctx->sequence_out++;
+		dst->sequence = ctx->sequence_cap++;
+
+		dst->timecode = src->timecode;
+		dst->vb2_buf.timestamp = src->vb2_buf.timestamp;
+		dst->flags = src->flags;
+
+		v4l2_m2m_buf_done(src, VB2_BUF_STATE_DONE);
+		v4l2_m2m_buf_done(dst, VB2_BUF_STATE_DONE);
+		v4l2_m2m_job_finish(ge2d->m2m_dev, ctx->fh.m2m_ctx);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static const struct v4l2_m2m_ops ge2d_m2m_ops = {
+	.device_run = device_run,
+};
+
+static int ge2d_queue_setup(struct vb2_queue *vq,
+			    unsigned int *nbuffers, unsigned int *nplanes,
+			    unsigned int sizes[], struct device *alloc_devs[])
+{
+	struct ge2d_ctx *ctx = vb2_get_drv_priv(vq);
+	struct ge2d_frame *f = get_frame(ctx, vq->type);
+
+	if (*nplanes)
+		return sizes[0] < f->pix_fmt.sizeimage ? -EINVAL : 0;
+
+	sizes[0] = f->pix_fmt.sizeimage;
+	*nplanes = 1;
+
+	return 0;
+}
+
+static int ge2d_buf_prepare(struct vb2_buffer *vb)
+{
+	struct ge2d_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue);
+	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
+	struct ge2d_frame *f = get_frame(ctx, vb->vb2_queue->type);
+
+	vbuf->field = V4L2_FIELD_NONE;
+
+	vb2_set_plane_payload(vb, 0, f->pix_fmt.sizeimage);
+
+	return 0;
+}
+
+static void ge2d_buf_queue(struct vb2_buffer *vb)
+{
+	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
+	struct ge2d_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue);
+
+	v4l2_m2m_buf_queue(ctx->fh.m2m_ctx, vbuf);
+}
+
+static int ge2d_start_streaming(struct vb2_queue *vq, unsigned int count)
+{
+	struct ge2d_ctx *ctx = vb2_get_drv_priv(vq);
+
+	if (V4L2_TYPE_IS_OUTPUT(vq->type)) {
+		ctx->streamon_out = true;
+		ctx->sequence_out = 0;
+	} else {
+		ctx->streamon_cap = true;
+		ctx->sequence_cap = 0;
+	}
+
+	return 0;
+}

drivers/media/platform/meson/ge2d/ge2d.c line 390

Quoted 10 lines
drivers/media/platform/meson/ge2d/ge2d.c new file +10 -0
+
+static void ge2d_stop_streaming(struct vb2_queue *vq)
+{
+	struct ge2d_ctx *ctx = vb2_get_drv_priv(vq);
+	struct vb2_v4l2_buffer *vbuf;
+
+	if (V4L2_TYPE_IS_OUTPUT(vq->type))
+		ctx->streamon_out = false;
+	else
+		ctx->streamon_cap = false;

Do you need streamon_out/cap? Can't you use vb2_start_streaming_called() instead?

Quoted 277 lines
drivers/media/platform/meson/ge2d/ge2d.c new file +277 -0
+
+	for (;;) {
+		if (V4L2_TYPE_IS_OUTPUT(vq->type))
+			vbuf = v4l2_m2m_src_buf_remove(ctx->fh.m2m_ctx);
+		else
+			vbuf = v4l2_m2m_dst_buf_remove(ctx->fh.m2m_ctx);
+		if (!vbuf)
+			break;
+		v4l2_m2m_buf_done(vbuf, VB2_BUF_STATE_ERROR);
+	}
+}
+
+static const struct vb2_ops ge2d_qops = {
+	.queue_setup = ge2d_queue_setup,
+	.buf_prepare = ge2d_buf_prepare,
+	.buf_queue = ge2d_buf_queue,
+	.start_streaming = ge2d_start_streaming,
+	.stop_streaming = ge2d_stop_streaming,
+	.wait_prepare = vb2_ops_wait_prepare,
+	.wait_finish = vb2_ops_wait_finish,
+};
+
+static int
+queue_init(void *priv, struct vb2_queue *src_vq, struct vb2_queue *dst_vq)
+{
+	struct ge2d_ctx *ctx = priv;
+	int ret;
+
+	src_vq->type = V4L2_BUF_TYPE_VIDEO_OUTPUT;
+	src_vq->io_modes = VB2_MMAP | VB2_DMABUF;
+	src_vq->drv_priv = ctx;
+	src_vq->ops = &ge2d_qops;
+	src_vq->mem_ops = &vb2_dma_contig_memops;
+	src_vq->buf_struct_size = sizeof(struct v4l2_m2m_buffer);
+	src_vq->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_COPY;
+	src_vq->lock = &ctx->ge2d->mutex;
+	src_vq->dev = ctx->ge2d->v4l2_dev.dev;
+
+	ret = vb2_queue_init(src_vq);
+	if (ret)
+		return ret;
+
+	dst_vq->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+	dst_vq->io_modes = VB2_MMAP | VB2_DMABUF;
+	dst_vq->drv_priv = ctx;
+	dst_vq->ops = &ge2d_qops;
+	dst_vq->mem_ops = &vb2_dma_contig_memops;
+	dst_vq->buf_struct_size = sizeof(struct v4l2_m2m_buffer);
+	dst_vq->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_COPY;
+	dst_vq->lock = &ctx->ge2d->mutex;
+	dst_vq->dev = ctx->ge2d->v4l2_dev.dev;
+
+	return vb2_queue_init(dst_vq);
+}
+
+static int
+vidioc_querycap(struct file *file, void *priv, struct v4l2_capability *cap)
+{
+	strscpy(cap->driver, GE2D_NAME, sizeof(cap->driver));
+	strscpy(cap->card, GE2D_NAME, sizeof(cap->card));
+	strscpy(cap->bus_info, "platform:" GE2D_NAME, sizeof(cap->bus_info));
+
+	return 0;
+}
+
+static int vidioc_enum_fmt(struct file *file, void *priv, struct v4l2_fmtdesc *f)
+{
+	const struct ge2d_fmt *fmt;
+
+	if (f->index >= NUM_FORMATS)
+		return -EINVAL;
+
+	fmt = &formats[f->index];
+	f->pixelformat = fmt->fourcc;
+
+	return 0;
+}
+
+static int vidioc_g_selection(struct file *file, void *priv,
+			      struct v4l2_selection *s)
+{
+	struct ge2d_ctx *ctx = priv;
+	struct ge2d_frame *f;
+	bool use_frame = false;
+
+	if (s->type != V4L2_BUF_TYPE_VIDEO_OUTPUT &&
+	    s->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		return -EINVAL;
+
+	f = get_frame(ctx, s->type);
+
+	switch (s->target) {
+	case V4L2_SEL_TGT_COMPOSE_DEFAULT:
+	case V4L2_SEL_TGT_COMPOSE_BOUNDS:
+		if (s->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+			return -EINVAL;
+		break;
+	case V4L2_SEL_TGT_CROP_DEFAULT:
+	case V4L2_SEL_TGT_CROP_BOUNDS:
+		if (s->type != V4L2_BUF_TYPE_VIDEO_OUTPUT)
+			return -EINVAL;
+		break;
+	case V4L2_SEL_TGT_COMPOSE:
+		if (s->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+			return -EINVAL;
+		use_frame = true;
+		break;
+	case V4L2_SEL_TGT_CROP:
+		if (s->type != V4L2_BUF_TYPE_VIDEO_OUTPUT)
+			return -EINVAL;
+		use_frame = true;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if (use_frame) {
+		s->r = f->crop;
+	} else {
+		s->r.left = 0;
+		s->r.top = 0;
+		s->r.width = f->pix_fmt.width;
+		s->r.height = f->pix_fmt.height;
+	}
+
+	return 0;
+}
+
+static int vidioc_s_selection(struct file *file, void *priv,
+			      struct v4l2_selection *s)
+{
+	struct ge2d_ctx *ctx = priv;
+	struct meson_ge2d *ge2d = ctx->ge2d;
+	struct ge2d_frame *f;
+	int ret = 0;
+
+	if (s->type != V4L2_BUF_TYPE_VIDEO_OUTPUT &&
+	    s->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		return -EINVAL;
+
+	f = get_frame(ctx, s->type);
+
+	switch (s->target) {
+	case V4L2_SEL_TGT_COMPOSE:
+		/*
+		 * COMPOSE target is only valid for capture buffer type, return
+		 * error for output buffer type
+		 */
+		if (s->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+			return -EINVAL;
+		break;
+	case V4L2_SEL_TGT_CROP:
+		/*
+		 * CROP target is only valid for output buffer type, return
+		 * error for capture buffer type
+		 */
+		if (s->type != V4L2_BUF_TYPE_VIDEO_OUTPUT)
+			return -EINVAL;
+		break;
+	/*
+	 * bound and default crop/compose targets are invalid targets to
+	 * try/set
+	 */
+	default:
+		return -EINVAL;
+	}
+
+	if (s->r.top < 0 || s->r.left < 0) {
+		v4l2_err(&ge2d->v4l2_dev,
+			 "doesn't support negative values for top & left.\n");
+		return -EINVAL;
+	}
+
+	if (s->r.left + s->r.width > f->pix_fmt.width ||
+	    s->r.top + s->r.height > f->pix_fmt.height) {
+		v4l2_err(&ge2d->v4l2_dev, "unsupported rectangle value.\n");
+		return -EINVAL;
+	}
+
+	f->crop = s->r;
+
+	return ret;
+}
+
+static void vidioc_setup_cap_fmt(struct ge2d_ctx *ctx, struct v4l2_pix_format *f)
+{
+	struct ge2d_frame *frm_out = get_frame(ctx, V4L2_BUF_TYPE_VIDEO_OUTPUT);
+
+	*f = frm_out->pix_fmt;
+
+	if (ctx->xy_swap) {
+		f->width = frm_out->pix_fmt.height;
+		f->height = frm_out->pix_fmt.width;
+	}
+}
+
+static int vidioc_try_fmt_cap(struct file *file, void *priv, struct v4l2_format *f)
+{
+	const struct ge2d_fmt *fmt = find_fmt(f);
+	struct ge2d_ctx *ctx = priv;
+	struct v4l2_pix_format fmt_cap;
+
+	vidioc_setup_cap_fmt(ctx, &fmt_cap);
+
+	fmt_cap.pixelformat = fmt->fourcc;
+
+	fmt_cap.bytesperline = max(f->fmt.pix.bytesperline,
+				   ALIGN((fmt_cap.width * fmt->depth) >> 3, 8));
+
+	fmt_cap.sizeimage = max(f->fmt.pix.sizeimage,
+				fmt_cap.height * fmt_cap.bytesperline);
+
+	f->fmt.pix = fmt_cap;
+
+	return 0;
+}
+
+static int vidioc_s_fmt_cap(struct file *file, void *priv, struct v4l2_format *f)
+{
+	struct ge2d_ctx *ctx = priv;
+	struct meson_ge2d *ge2d = ctx->ge2d;
+	struct vb2_queue *vq;
+	struct ge2d_frame *frm;
+	int ret = 0;
+
+	/* Adjust all values accordingly to the hardware capabilities
+	 * and chosen format.
+	 */
+	ret = vidioc_try_fmt_cap(file, priv, f);
+	if (ret)
+		return ret;
+
+	vq = v4l2_m2m_get_vq(ctx->fh.m2m_ctx, f->type);
+	if (vb2_is_busy(vq)) {
+		v4l2_err(&ge2d->v4l2_dev, "queue (%d) bust\n", f->type);
+		return -EBUSY;
+	}
+
+	frm = get_frame(ctx, V4L2_BUF_TYPE_VIDEO_CAPTURE);
+
+	frm->pix_fmt = f->fmt.pix;
+	frm->fmt = find_fmt(f);
+	f->fmt.pix.pixelformat = frm->fmt->fourcc;
+
+	/* Reset crop settings */
+	frm->crop.left = 0;
+	frm->crop.top = 0;
+	frm->crop.width = frm->pix_fmt.width;
+	frm->crop.height = frm->pix_fmt.height;
+
+	return 0;
+}
+
+static int vidioc_g_fmt(struct file *file, void *priv, struct v4l2_format *f)
+{
+	struct ge2d_ctx *ctx = priv;
+	struct vb2_queue *vq;
+	struct ge2d_frame *frm;
+
+	vq = v4l2_m2m_get_vq(ctx->fh.m2m_ctx, f->type);
+	if (!vq)
+		return -EINVAL;
+
+	frm = get_frame(ctx, f->type);
+
+	f->fmt.pix = frm->pix_fmt;
+	f->fmt.pix.pixelformat = frm->fmt->fourcc;
+
+	return 0;
+}
+
+static int vidioc_try_fmt_out(struct file *file, void *priv, struct v4l2_format *f)
+{
+	const struct ge2d_fmt *fmt = find_fmt(f);
+
+	f->fmt.pix.field = V4L2_FIELD_NONE;
+	f->fmt.pix.pixelformat = fmt->fourcc;

drivers/media/platform/meson/ge2d/ge2d.c line 677

Quoted 10 lines
drivers/media/platform/meson/ge2d/ge2d.c new file +10 -0
+
+	if (f->fmt.pix.width > MAX_WIDTH)
+		f->fmt.pix.width = MAX_WIDTH;
+	if (f->fmt.pix.height > MAX_HEIGHT)
+		f->fmt.pix.height = MAX_HEIGHT;
+
+	if (f->fmt.pix.width < 0)
+		f->fmt.pix.width = 0;
+	if (f->fmt.pix.height < 0)
+		f->fmt.pix.height = 0;

width and height are unsigned, so this check is not needed.

Quoted 91 lines
drivers/media/platform/meson/ge2d/ge2d.c new file +91 -0
+
+	f->fmt.pix.bytesperline = max(f->fmt.pix.bytesperline,
+				      ALIGN((f->fmt.pix.width * fmt->depth) >> 3, 8));
+
+	f->fmt.pix.sizeimage = max(f->fmt.pix.sizeimage,
+				   f->fmt.pix.height * f->fmt.pix.bytesperline);
+
+	return 0;
+}
+
+static int vidioc_s_fmt_out(struct file *file, void *priv, struct v4l2_format *f)
+{
+	struct ge2d_ctx *ctx = priv;
+	struct meson_ge2d *ge2d = ctx->ge2d;
+	struct vb2_queue *vq;
+	struct ge2d_frame *frm, *frm_cap;
+	int ret = 0;
+
+	/* Adjust all values accordingly to the hardware capabilities
+	 * and chosen format.
+	 */
+	ret = vidioc_try_fmt_out(file, priv, f);
+	if (ret)
+		return ret;
+
+	vq = v4l2_m2m_get_vq(ctx->fh.m2m_ctx, f->type);
+	if (vb2_is_busy(vq)) {
+		v4l2_err(&ge2d->v4l2_dev, "queue (%d) bust\n", f->type);
+		return -EBUSY;
+	}
+
+	frm = get_frame(ctx, V4L2_BUF_TYPE_VIDEO_OUTPUT);
+	frm_cap = get_frame(ctx, V4L2_BUF_TYPE_VIDEO_CAPTURE);
+
+	frm->pix_fmt = f->fmt.pix;
+	frm->fmt = find_fmt(f);
+	f->fmt.pix.pixelformat = frm->fmt->fourcc;
+
+	/* Reset crop settings */
+	frm->crop.left = 0;
+	frm->crop.top = 0;
+	frm->crop.width = frm->pix_fmt.width;
+	frm->crop.height = frm->pix_fmt.height;
+
+	/* Propagate settings to capture */
+	vidioc_setup_cap_fmt(ctx, &frm_cap->pix_fmt);
+
+	return 0;
+}
+
+static const struct v4l2_ioctl_ops ge2d_ioctl_ops = {
+	.vidioc_querycap = vidioc_querycap,
+
+	.vidioc_enum_fmt_vid_cap = vidioc_enum_fmt,
+	.vidioc_g_fmt_vid_cap = vidioc_g_fmt,
+	.vidioc_try_fmt_vid_cap = vidioc_try_fmt_cap,
+	.vidioc_s_fmt_vid_cap = vidioc_s_fmt_cap,
+
+	.vidioc_enum_fmt_vid_out = vidioc_enum_fmt,
+	.vidioc_g_fmt_vid_out = vidioc_g_fmt,
+	.vidioc_try_fmt_vid_out = vidioc_try_fmt_out,
+	.vidioc_s_fmt_vid_out = vidioc_s_fmt_out,
+
+	.vidioc_reqbufs = v4l2_m2m_ioctl_reqbufs,
+	.vidioc_querybuf = v4l2_m2m_ioctl_querybuf,
+	.vidioc_qbuf = v4l2_m2m_ioctl_qbuf,
+	.vidioc_dqbuf = v4l2_m2m_ioctl_dqbuf,
+	.vidioc_prepare_buf = v4l2_m2m_ioctl_prepare_buf,
+	.vidioc_create_bufs = v4l2_m2m_ioctl_create_bufs,
+	.vidioc_expbuf = v4l2_m2m_ioctl_expbuf,
+
+	.vidioc_subscribe_event = v4l2_ctrl_subscribe_event,
+	.vidioc_unsubscribe_event = v4l2_event_unsubscribe,
+
+	.vidioc_streamon = v4l2_m2m_ioctl_streamon,
+	.vidioc_streamoff = v4l2_m2m_ioctl_streamoff,
+
+	.vidioc_g_selection = vidioc_g_selection,
+	.vidioc_s_selection = vidioc_s_selection,
+};
+
+static int ge2d_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct ge2d_ctx *ctx = container_of(ctrl->handler, struct ge2d_ctx,
+					   ctrl_handler);
+	struct v4l2_pix_format fmt;
+	struct vb2_queue *vq;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ctx->ge2d->ctrl_lock, flags);
+	switch (ctrl->id) {

drivers/media/platform/meson/ge2d/ge2d.c line 778

Quoted 10 lines
drivers/media/platform/meson/ge2d/ge2d.c new file +10 -0
+	case V4L2_CID_HFLIP:
+		ctx->hflip = ctrl->val;
+		break;
+	case V4L2_CID_VFLIP:
+		ctx->vflip = ctrl->val;
+		break;
+	case V4L2_CID_ROTATE:
+		vq = v4l2_m2m_get_vq(ctx->fh.m2m_ctx, V4L2_BUF_TYPE_VIDEO_CAPTURE);
+		if (vb2_is_busy(vq))
+			return -EBUSY;

This doesn't call spin_unlock_irqrestore()!

Do you need the spinlock at all? This function is already called with a mutex for ctrl->handler held. It's unusual to see a spinlock here.

Quoted 242 lines
drivers/media/platform/meson/ge2d/ge2d.c new file +242 -0
+
+		if (ctrl->val == 90) {
+			ctx->hflip = 0;
+			ctx->vflip = 0;
+			ctx->xy_swap = 1;
+		} else if (ctrl->val == 180) {
+			ctx->hflip = 1;
+			ctx->vflip = 1;
+			ctx->xy_swap = 0;
+		} else if (ctrl->val == 270) {
+			ctx->hflip = 1;
+			ctx->vflip = 1;
+			ctx->xy_swap = 1;
+		} else {
+			ctx->hflip = 0;
+			ctx->vflip = 0;
+			ctx->xy_swap = 0;
+		}
+
+		vidioc_setup_cap_fmt(ctx, &fmt);
+
+		/*
+		 * If the rotation parameter changes the OUTPUT frames
+		 * parameters, take them in account
+		 */
+		if (fmt.width != ctx->out.pix_fmt.width ||
+		    fmt.height != ctx->out.pix_fmt.width ||
+		    fmt.bytesperline > ctx->out.pix_fmt.bytesperline ||
+		    fmt.sizeimage > ctx->out.pix_fmt.sizeimage)
+			ctx->out.pix_fmt = fmt;
+
+		break;
+	}
+	spin_unlock_irqrestore(&ctx->ge2d->ctrl_lock, flags);
+
+	return 0;
+}
+
+static const struct v4l2_ctrl_ops ge2d_ctrl_ops = {
+	.s_ctrl = ge2d_s_ctrl,
+};
+
+static int ge2d_setup_ctrls(struct ge2d_ctx *ctx)
+{
+	struct meson_ge2d *ge2d = ctx->ge2d;
+
+	v4l2_ctrl_handler_init(&ctx->ctrl_handler, 4);
+
+	v4l2_ctrl_new_std(&ctx->ctrl_handler, &ge2d_ctrl_ops,
+			  V4L2_CID_HFLIP, 0, 1, 1, 0);
+
+	v4l2_ctrl_new_std(&ctx->ctrl_handler, &ge2d_ctrl_ops,
+			  V4L2_CID_VFLIP, 0, 1, 1, 0);
+
+	v4l2_ctrl_new_std(&ctx->ctrl_handler, &ge2d_ctrl_ops,
+			  V4L2_CID_ROTATE, 0, 270, 90, 0);
+
+	if (ctx->ctrl_handler.error) {
+		int err = ctx->ctrl_handler.error;
+
+		v4l2_err(&ge2d->v4l2_dev, "%s failed\n", __func__);
+		v4l2_ctrl_handler_free(&ctx->ctrl_handler);
+		return err;
+	}
+
+	return 0;
+}
+
+static const struct ge2d_frame def_frame = {
+	.pix_fmt = {
+		.width = DEFAULT_WIDTH,
+		.height = DEFAULT_HEIGHT,
+		.bytesperline = DEFAULT_STRIDE,
+		.sizeimage = DEFAULT_STRIDE * DEFAULT_HEIGHT,
+		.field = V4L2_FIELD_NONE,
+	},
+	.crop.width = DEFAULT_WIDTH,
+	.crop.height = DEFAULT_HEIGHT,
+	.fmt = &formats[0],
+};
+
+static int ge2d_open(struct file *file)
+{
+	struct meson_ge2d *ge2d = video_drvdata(file);
+	struct ge2d_ctx *ctx = NULL;
+	int ret = 0;
+
+	ctx = kzalloc(sizeof(*ctx), GFP_KERNEL);
+	if (!ctx)
+		return -ENOMEM;
+	ctx->ge2d = ge2d;
+
+	/* Set default formats */
+	ctx->in = def_frame;
+	ctx->out = def_frame;
+
+	if (mutex_lock_interruptible(&ge2d->mutex)) {
+		kfree(ctx);
+		return -ERESTARTSYS;
+	}
+	ctx->fh.m2m_ctx = v4l2_m2m_ctx_init(ge2d->m2m_dev, ctx, &queue_init);
+	if (IS_ERR(ctx->fh.m2m_ctx)) {
+		ret = PTR_ERR(ctx->fh.m2m_ctx);
+		mutex_unlock(&ge2d->mutex);
+		kfree(ctx);
+		return ret;
+	}
+	v4l2_fh_init(&ctx->fh, video_devdata(file));
+	file->private_data = &ctx->fh;
+	v4l2_fh_add(&ctx->fh);
+
+	ge2d_setup_ctrls(ctx);
+
+	/* Write the default values to the ctx struct */
+	v4l2_ctrl_handler_setup(&ctx->ctrl_handler);
+
+	ctx->fh.ctrl_handler = &ctx->ctrl_handler;
+	mutex_unlock(&ge2d->mutex);
+
+	return 0;
+}
+
+static int ge2d_release(struct file *file)
+{
+	struct ge2d_ctx *ctx =
+		container_of(file->private_data, struct ge2d_ctx, fh);
+	struct meson_ge2d *ge2d = ctx->ge2d;
+
+	mutex_lock(&ge2d->mutex);
+
+	v4l2_m2m_ctx_release(ctx->fh.m2m_ctx);
+
+	v4l2_ctrl_handler_free(&ctx->ctrl_handler);
+	v4l2_fh_del(&ctx->fh);
+	v4l2_fh_exit(&ctx->fh);
+	kfree(ctx);
+
+	mutex_unlock(&ge2d->mutex);
+
+	return 0;
+}
+
+static const struct v4l2_file_operations ge2d_fops = {
+	.owner = THIS_MODULE,
+	.open = ge2d_open,
+	.release = ge2d_release,
+	.poll = v4l2_m2m_fop_poll,
+	.unlocked_ioctl = video_ioctl2,
+	.mmap = v4l2_m2m_fop_mmap,
+};
+
+static const struct video_device ge2d_videodev = {
+	.name = "meson-ge2d",
+	.fops = &ge2d_fops,
+	.ioctl_ops = &ge2d_ioctl_ops,
+	.minor = -1,
+	.release = video_device_release,
+	.vfl_dir = VFL_DIR_M2M,
+	.device_caps = V4L2_CAP_VIDEO_M2M | V4L2_CAP_STREAMING,
+};
+
+static const struct regmap_config meson_ge2d_regmap_conf = {
+	.reg_bits = 8,
+	.val_bits = 32,
+	.reg_stride = 4,
+	.max_register = GE2D_SRC2_STRIDE_CTRL,
+};
+
+static int ge2d_probe(struct platform_device *pdev)
+{
+	struct reset_control *rst;
+	struct video_device *vfd;
+	struct meson_ge2d *ge2d;
+	struct resource *res;
+	void __iomem *regs;
+	int ret = 0;
+	int irq;
+
+	if (!pdev->dev.of_node)
+		return -ENODEV;
+
+	ge2d = devm_kzalloc(&pdev->dev, sizeof(*ge2d), GFP_KERNEL);
+	if (!ge2d)
+		return -ENOMEM;
+
+	ge2d->dev = &pdev->dev;
+	spin_lock_init(&ge2d->ctrl_lock);
+	mutex_init(&ge2d->mutex);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	regs = devm_ioremap_resource(ge2d->dev, res);
+	if (IS_ERR(regs))
+		return PTR_ERR(regs);
+
+	ge2d->map = devm_regmap_init_mmio(ge2d->dev, regs,
+					  &meson_ge2d_regmap_conf);
+	if (IS_ERR(ge2d->map))
+		return PTR_ERR(ge2d->map);
+
+	irq = platform_get_irq(pdev, 0);
+	ret = devm_request_irq(ge2d->dev, irq, ge2d_isr, 0,
+			       dev_name(ge2d->dev), ge2d);
+	if (ret < 0) {
+		dev_err(ge2d->dev, "failed to request irq\n");
+		return ret;
+	}
+
+	rst = devm_reset_control_get(ge2d->dev, NULL);
+	if (IS_ERR(rst)) {
+		dev_err(ge2d->dev, "failed to get core reset controller\n");
+		return PTR_ERR(rst);
+	}
+
+	ge2d->clk = devm_clk_get(ge2d->dev, NULL);
+	if (IS_ERR(ge2d->clk)) {
+		dev_err(ge2d->dev, "failed to get clock\n");
+		return PTR_ERR(ge2d->clk);
+	}
+
+	reset_control_assert(rst);
+	udelay(1);
+	reset_control_deassert(rst);
+
+	ret = clk_prepare_enable(ge2d->clk);
+	if (ret) {
+		dev_err(ge2d->dev, "Cannot enable ge2d sclk: %d\n", ret);
+		return ret;
+	}
+
+	ret = v4l2_device_register(&pdev->dev, &ge2d->v4l2_dev);
+	if (ret)
+		goto disable_clks;
+
+	vfd = video_device_alloc();
+	if (!vfd) {
+		v4l2_err(&ge2d->v4l2_dev, "Failed to allocate video device\n");
+		goto unreg_v4l2_dev;
+	}
+
+	*vfd = ge2d_videodev;
+	vfd->lock = &ge2d->mutex;
+	vfd->v4l2_dev = &ge2d->v4l2_dev;

drivers/media/platform/meson/ge2d/ge2d.c line 1030

Quoted 10 lines
drivers/media/platform/meson/ge2d/ge2d.c new file +10 -0
+
+	video_set_drvdata(vfd, ge2d);
+	ge2d->vfd = vfd;
+
+	platform_set_drvdata(pdev, ge2d);
+	ge2d->m2m_dev = v4l2_m2m_init(&ge2d_m2m_ops);
+	if (IS_ERR(ge2d->m2m_dev)) {
+		v4l2_err(&ge2d->v4l2_dev, "Failed to init mem2mem device\n");
+		ret = PTR_ERR(ge2d->m2m_dev);
+		goto unreg_video_dev;

This should be goto rel_vdev.

Quoted 7 lines
drivers/media/platform/meson/ge2d/ge2d.c new file +7 -0
+	}
+
+	ret = video_register_device(vfd, VFL_TYPE_VIDEO, -1);
+	if (ret) {
+		v4l2_err(&ge2d->v4l2_dev, "Failed to register video device\n");
+		goto rel_vdev;
+	}

drivers/media/platform/meson/ge2d/ge2d.c line 1047

Quoted 10 lines
drivers/media/platform/meson/ge2d/ge2d.c new file +10 -0
+
+	v4l2_info(&ge2d->v4l2_dev, "Registered %s as /dev/%s\n",
+		  vfd->name, video_device_node_name(vfd));
+
+	return 0;
+
+rel_vdev:
+	video_device_release(vfd);
+unreg_video_dev:
+	video_unregister_device(ge2d->vfd);

This makes no sense. If video_register_device() fails, then you call video_device_release(vfd), not video_unregister_device().

Just drop these two lines.

Quoted 35 lines
drivers/media/platform/meson/ge2d/ge2d.c new file +34 -0
+unreg_v4l2_dev:
+	v4l2_device_unregister(&ge2d->v4l2_dev);
+disable_clks:
+	clk_disable_unprepare(ge2d->clk);
+
+	return ret;
+}
+
+static int ge2d_remove(struct platform_device *pdev)
+{
+	struct meson_ge2d *ge2d = platform_get_drvdata(pdev);
+
+	v4l2_m2m_release(ge2d->m2m_dev);
+	video_unregister_device(ge2d->vfd);
+	v4l2_device_unregister(&ge2d->v4l2_dev);
+
+	clk_disable_unprepare(ge2d->clk);
+
+	return 0;
+}
+
+static const struct of_device_id meson_ge2d_match[] = {
+	{
+		.compatible = "amlogic,axg-ge2d",
+	},
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, meson_ge2d_match);
+
+static struct platform_driver ge2d_drv = {
+	.probe = ge2d_probe,
+	.remove = ge2d_remove,
+	.driver = {

drivers/media/platform/meson/ge2d/ge2d.c line 1091

Quoted 10 lines
drivers/media/platform/meson/ge2d/ge2d.c new file +10 -0
+		.name = "meson-ge2d",
+		.of_match_table = meson_ge2d_match,
+	},
+};
+
+module_platform_driver(ge2d_drv);
+
+MODULE_AUTHOR("Neil Armstrong <[email protected]>");
+MODULE_DESCRIPTION("Amlogic 2D Graphic Acceleration Unit");
+MODULE_LICENSE("GPL");

Regards,

Hans

_______________________________________________
linux-amlogic mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-amlogic

#4 lore raw

Re: [PATCH v3 2/4] media: meson: Add M2M driver for the Amlogic GE2D Accelerator Unit

Hi Hans,

Quoted 33 lines · Hans Verkuil
Quoted 32 lines · Neil Armstrong

The GE2D is a 2D accelerator with various features like configurable blitter with alpha blending, frame rotation, scaling, format conversion and colorspace conversion.

The driver implements a Memory2Memory VB2 V4L2 streaming device permitting:
- 0, 90, 180, 270deg rotation
- horizontal/vertical flipping
- source cropping
- destination compositing
- 32bit/24bit/16bit format conversion

This adds the support for the GE2D version found in the AXG SoCs Family.

The missing features are:
- Source scaling
- Colorspace conversion
- Advanced alpha blending & blitting options

Is passes v4l2-compliance SHA: ea16a7ef13a902793a5c2626b0cefc4d956147f3, 64 bits, 64-bit time_t

---
 drivers/media/platform/Kconfig                |   13 +
 drivers/media/platform/Makefile               |    2 +
 drivers/media/platform/meson/ge2d/Makefile    |    3 +
 drivers/media/platform/meson/ge2d/ge2d-regs.h |  360 ++++++
 drivers/media/platform/meson/ge2d/ge2d.c      | 1091 +++++++++++++++++
 5 files changed, 1469 insertions(+)
 create mode 100644 drivers/media/platform/meson/ge2d/Makefile
 create mode 100644 drivers/media/platform/meson/ge2d/ge2d-regs.h
 create mode 100644 drivers/media/platform/meson/ge2d/ge2d.c

[...]

Quoted 5 lines

drivers/media/platform/meson/ge2d/ge2d.c line 32

Quoted 3 lines
drivers/media/platform/meson/ge2d/ge2d.c new file +3 -0
+
+#define DEFAULT_WIDTH	100
+#define DEFAULT_HEIGHT	100

That's a weird default value. I would expect to see some multiple of 8 here.

Sure, whatever the HW is quite flexible, I took 100x100 from the other 2D accelerator drivers actually.

[...]

Quoted 4 lines
Quoted 4 lines
drivers/media/platform/meson/ge2d/ge2d.c new file +4 -0
+
+static void ge2d_stop_streaming(struct vb2_queue *vq)
+{
+	struct ge2d_ctx *ctx = vb2_get_drv_priv(vq);
Quoted 8 lines

drivers/media/platform/meson/ge2d/ge2d.c line 390

Quoted 6 lines
drivers/media/platform/meson/ge2d/ge2d.c new file +6 -0
+	struct vb2_v4l2_buffer *vbuf;
+
+	if (V4L2_TYPE_IS_OUTPUT(vq->type))
+		ctx->streamon_out = false;
+	else
+		ctx->streamon_cap = false;

Do you need streamon_out/cap? Can't you use vb2_start_streaming_called() instead?

Indeed, I'll switch to vb2_start_streaming_called & co.

[...]

Quoted 11 lines
Quoted 11 lines
drivers/media/platform/meson/ge2d/ge2d.c new file +11 -0
+
+static int vidioc_try_fmt_out(struct file *file, void *priv, struct v4l2_format *f)
+{
+	const struct ge2d_fmt *fmt = find_fmt(f);
+
+	f->fmt.pix.field = V4L2_FIELD_NONE;
+	f->fmt.pix.pixelformat = fmt->fourcc;
+
+	if (f->fmt.pix.width > MAX_WIDTH)
+		f->fmt.pix.width = MAX_WIDTH;
+	if (f->fmt.pix.height > MAX_HEIGHT)
Quoted 8 lines

drivers/media/platform/meson/ge2d/ge2d.c line 677

Quoted 6 lines
drivers/media/platform/meson/ge2d/ge2d.c new file +6 -0
+		f->fmt.pix.height = MAX_HEIGHT;
+
+	if (f->fmt.pix.width < 0)
+		f->fmt.pix.width = 0;
+	if (f->fmt.pix.height < 0)
+		f->fmt.pix.height = 0;

width and height are unsigned, so this check is not needed.

Ok

[...]

Quoted 24 lines
Quoted 11 lines
drivers/media/platform/meson/ge2d/ge2d.c new file +11 -0
+
+static int ge2d_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct ge2d_ctx *ctx = container_of(ctrl->handler, struct ge2d_ctx,
+					   ctrl_handler);
+	struct v4l2_pix_format fmt;
+	struct vb2_queue *vq;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ctx->ge2d->ctrl_lock, flags);
+	switch (ctrl->id) {

drivers/media/platform/meson/ge2d/ge2d.c line 778

Quoted 10 lines
drivers/media/platform/meson/ge2d/ge2d.c new file +10 -0
+	case V4L2_CID_HFLIP:
+		ctx->hflip = ctrl->val;
+		break;
+	case V4L2_CID_VFLIP:
+		ctx->vflip = ctrl->val;
+		break;
+	case V4L2_CID_ROTATE:
+		vq = v4l2_m2m_get_vq(ctx->fh.m2m_ctx, V4L2_BUF_TYPE_VIDEO_CAPTURE);
+		if (vb2_is_busy(vq))
+			return -EBUSY;

This doesn't call spin_unlock_irqrestore()!

Quoted 2 lines

Do you need the spinlock at all? This function is already called with a mutex for ctrl->handler held. It's unusual to see a spinlock here.

Is device_run also called with ctrl->handler held ?

The spinlock is used to protect against concurrent re-config & run.

[...]

Quoted 31 lines

drivers/media/platform/meson/ge2d/ge2d.c line 1030

Quoted 7 lines
drivers/media/platform/meson/ge2d/ge2d.c new file +7 -0
+
+	platform_set_drvdata(pdev, ge2d);
+	ge2d->m2m_dev = v4l2_m2m_init(&ge2d_m2m_ops);
+	if (IS_ERR(ge2d->m2m_dev)) {
+		v4l2_err(&ge2d->v4l2_dev, "Failed to init mem2mem device\n");
+		ret = PTR_ERR(ge2d->m2m_dev);
+		goto unreg_video_dev;

This should be goto rel_vdev.

Quoted 7 lines
drivers/media/platform/meson/ge2d/ge2d.c new file +7 -0
+	}
+
+	ret = video_register_device(vfd, VFL_TYPE_VIDEO, -1);
+	if (ret) {
+		v4l2_err(&ge2d->v4l2_dev, "Failed to register video device\n");
+		goto rel_vdev;
+	}

drivers/media/platform/meson/ge2d/ge2d.c line 1047

Quoted 10 lines
drivers/media/platform/meson/ge2d/ge2d.c new file +10 -0
+
+	v4l2_info(&ge2d->v4l2_dev, "Registered %s as /dev/%s\n",
+		  vfd->name, video_device_node_name(vfd));
+
+	return 0;
+
+rel_vdev:
+	video_device_release(vfd);
+unreg_video_dev:
+	video_unregister_device(ge2d->vfd);

This makes no sense. If video_register_device() fails, then you call video_device_release(vfd), not video_unregister_device().

Quoted 1 line

Just drop these two lines.

ok

Quoted 49 lines
Quoted 36 lines
drivers/media/platform/meson/ge2d/ge2d.c new file +34 -0
+unreg_v4l2_dev:
+	v4l2_device_unregister(&ge2d->v4l2_dev);
+disable_clks:
+	clk_disable_unprepare(ge2d->clk);
+
+	return ret;
+}
+
+static int ge2d_remove(struct platform_device *pdev)
+{
+	struct meson_ge2d *ge2d = platform_get_drvdata(pdev);
+
+	v4l2_m2m_release(ge2d->m2m_dev);
+	video_unregister_device(ge2d->vfd);
+	v4l2_device_unregister(&ge2d->v4l2_dev);
+
+	clk_disable_unprepare(ge2d->clk);
+
+	return 0;
+}
+
+static const struct of_device_id meson_ge2d_match[] = {
+	{
+		.compatible = "amlogic,axg-ge2d",
+	},
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, meson_ge2d_match);
+
+static struct platform_driver ge2d_drv = {
+	.probe = ge2d_probe,
+	.remove = ge2d_remove,
+	.driver = {

drivers/media/platform/meson/ge2d/ge2d.c line 1091

Quoted 10 lines
drivers/media/platform/meson/ge2d/ge2d.c new file +10 -0
+		.name = "meson-ge2d",
+		.of_match_table = meson_ge2d_match,
+	},
+};
+
+module_platform_driver(ge2d_drv);
+
+MODULE_AUTHOR("Neil Armstrong <[email protected]>");
+MODULE_DESCRIPTION("Amlogic 2D Graphic Acceleration Unit");
+MODULE_LICENSE("GPL");

Regards,

Quoted 2 lines

Hans

Thanks,
Neil

_______________________________________________
linux-amlogic mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-amlogic

#5 lore raw

Re: [PATCH v3 2/4] media: meson: Add M2M driver for the Amlogic GE2D Accelerator Unit

Quoted 114 lines · Neil Armstrong

Hi Hans,

Quoted 33 lines · Hans Verkuil
Quoted 32 lines · Neil Armstrong

The GE2D is a 2D accelerator with various features like configurable blitter with alpha blending, frame rotation, scaling, format conversion and colorspace conversion.

The driver implements a Memory2Memory VB2 V4L2 streaming device permitting:
- 0, 90, 180, 270deg rotation
- horizontal/vertical flipping
- source cropping
- destination compositing
- 32bit/24bit/16bit format conversion

This adds the support for the GE2D version found in the AXG SoCs Family.

The missing features are:
- Source scaling
- Colorspace conversion
- Advanced alpha blending & blitting options

Is passes v4l2-compliance SHA: ea16a7ef13a902793a5c2626b0cefc4d956147f3, 64 bits, 64-bit time_t

---
 drivers/media/platform/Kconfig                |   13 +
 drivers/media/platform/Makefile               |    2 +
 drivers/media/platform/meson/ge2d/Makefile    |    3 +
 drivers/media/platform/meson/ge2d/ge2d-regs.h |  360 ++++++
 drivers/media/platform/meson/ge2d/ge2d.c      | 1091 +++++++++++++++++
 5 files changed, 1469 insertions(+)
 create mode 100644 drivers/media/platform/meson/ge2d/Makefile
 create mode 100644 drivers/media/platform/meson/ge2d/ge2d-regs.h
 create mode 100644 drivers/media/platform/meson/ge2d/ge2d.c

[...]

Quoted 5 lines

drivers/media/platform/meson/ge2d/ge2d.c line 32

Quoted 3 lines
drivers/media/platform/meson/ge2d/ge2d.c new file +3 -0
+
+#define DEFAULT_WIDTH	100
+#define DEFAULT_HEIGHT	100

That's a weird default value. I would expect to see some multiple of 8 here.

Sure, whatever the HW is quite flexible, I took 100x100 from the other 2D accelerator drivers actually.

[...]

Quoted 4 lines
Quoted 4 lines
drivers/media/platform/meson/ge2d/ge2d.c new file +4 -0
+
+static void ge2d_stop_streaming(struct vb2_queue *vq)
+{
+	struct ge2d_ctx *ctx = vb2_get_drv_priv(vq);
Quoted 8 lines

drivers/media/platform/meson/ge2d/ge2d.c line 390

Quoted 6 lines
drivers/media/platform/meson/ge2d/ge2d.c new file +6 -0
+	struct vb2_v4l2_buffer *vbuf;
+
+	if (V4L2_TYPE_IS_OUTPUT(vq->type))
+		ctx->streamon_out = false;
+	else
+		ctx->streamon_cap = false;

Do you need streamon_out/cap? Can't you use vb2_start_streaming_called() instead?

Indeed, I'll switch to vb2_start_streaming_called & co.

[...]

Quoted 11 lines
Quoted 11 lines
drivers/media/platform/meson/ge2d/ge2d.c new file +11 -0
+
+static int vidioc_try_fmt_out(struct file *file, void *priv, struct v4l2_format *f)
+{
+	const struct ge2d_fmt *fmt = find_fmt(f);
+
+	f->fmt.pix.field = V4L2_FIELD_NONE;
+	f->fmt.pix.pixelformat = fmt->fourcc;
+
+	if (f->fmt.pix.width > MAX_WIDTH)
+		f->fmt.pix.width = MAX_WIDTH;
+	if (f->fmt.pix.height > MAX_HEIGHT)
Quoted 8 lines

drivers/media/platform/meson/ge2d/ge2d.c line 677

Quoted 6 lines
drivers/media/platform/meson/ge2d/ge2d.c new file +6 -0
+		f->fmt.pix.height = MAX_HEIGHT;
+
+	if (f->fmt.pix.width < 0)
+		f->fmt.pix.width = 0;
+	if (f->fmt.pix.height < 0)
+		f->fmt.pix.height = 0;

width and height are unsigned, so this check is not needed.

Ok

[...]

Quoted 24 lines
Quoted 11 lines
drivers/media/platform/meson/ge2d/ge2d.c new file +11 -0
+
+static int ge2d_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct ge2d_ctx *ctx = container_of(ctrl->handler, struct ge2d_ctx,
+					   ctrl_handler);
+	struct v4l2_pix_format fmt;
+	struct vb2_queue *vq;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ctx->ge2d->ctrl_lock, flags);
+	switch (ctrl->id) {

drivers/media/platform/meson/ge2d/ge2d.c line 778

Quoted 10 lines
drivers/media/platform/meson/ge2d/ge2d.c new file +10 -0
+	case V4L2_CID_HFLIP:
+		ctx->hflip = ctrl->val;
+		break;
+	case V4L2_CID_VFLIP:
+		ctx->vflip = ctrl->val;
+		break;
+	case V4L2_CID_ROTATE:
+		vq = v4l2_m2m_get_vq(ctx->fh.m2m_ctx, V4L2_BUF_TYPE_VIDEO_CAPTURE);
+		if (vb2_is_busy(vq))
+			return -EBUSY;

This doesn't call spin_unlock_irqrestore()!

Quoted 6 lines
Quoted 2 lines

Do you need the spinlock at all? This function is already called with a mutex for ctrl->handler held. It's unusual to see a spinlock here.

Is device_run also called with ctrl->handler held ?

The spinlock is used to protect against concurrent re-config & run.

Ah, I see. I think it would help to add some more comments.

BTW, do you need to save the irq state? This function definitely can't be called from interrupt context, and I suspect that's also true of the other place where this spinlock is used.

Quoted 87 lines

[...]

Quoted 31 lines

drivers/media/platform/meson/ge2d/ge2d.c line 1030

Quoted 7 lines
drivers/media/platform/meson/ge2d/ge2d.c new file +7 -0
+
+	platform_set_drvdata(pdev, ge2d);
+	ge2d->m2m_dev = v4l2_m2m_init(&ge2d_m2m_ops);
+	if (IS_ERR(ge2d->m2m_dev)) {
+		v4l2_err(&ge2d->v4l2_dev, "Failed to init mem2mem device\n");
+		ret = PTR_ERR(ge2d->m2m_dev);
+		goto unreg_video_dev;

This should be goto rel_vdev.

Quoted 7 lines
drivers/media/platform/meson/ge2d/ge2d.c new file +7 -0
+	}
+
+	ret = video_register_device(vfd, VFL_TYPE_VIDEO, -1);
+	if (ret) {
+		v4l2_err(&ge2d->v4l2_dev, "Failed to register video device\n");
+		goto rel_vdev;
+	}

drivers/media/platform/meson/ge2d/ge2d.c line 1047

Quoted 10 lines
drivers/media/platform/meson/ge2d/ge2d.c new file +10 -0
+
+	v4l2_info(&ge2d->v4l2_dev, "Registered %s as /dev/%s\n",
+		  vfd->name, video_device_node_name(vfd));
+
+	return 0;
+
+rel_vdev:
+	video_device_release(vfd);
+unreg_video_dev:
+	video_unregister_device(ge2d->vfd);

This makes no sense. If video_register_device() fails, then you call video_device_release(vfd), not video_unregister_device().

Quoted 1 line

Just drop these two lines.

ok

Quoted 49 lines
Quoted 36 lines
drivers/media/platform/meson/ge2d/ge2d.c new file +34 -0
+unreg_v4l2_dev:
+	v4l2_device_unregister(&ge2d->v4l2_dev);
+disable_clks:
+	clk_disable_unprepare(ge2d->clk);
+
+	return ret;
+}
+
+static int ge2d_remove(struct platform_device *pdev)
+{
+	struct meson_ge2d *ge2d = platform_get_drvdata(pdev);
+
+	v4l2_m2m_release(ge2d->m2m_dev);
+	video_unregister_device(ge2d->vfd);
+	v4l2_device_unregister(&ge2d->v4l2_dev);
+
+	clk_disable_unprepare(ge2d->clk);
+
+	return 0;
+}
+
+static const struct of_device_id meson_ge2d_match[] = {
+	{
+		.compatible = "amlogic,axg-ge2d",
+	},
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, meson_ge2d_match);
+
+static struct platform_driver ge2d_drv = {
+	.probe = ge2d_probe,
+	.remove = ge2d_remove,
+	.driver = {

drivers/media/platform/meson/ge2d/ge2d.c line 1091

Quoted 10 lines
drivers/media/platform/meson/ge2d/ge2d.c new file +10 -0
+		.name = "meson-ge2d",
+		.of_match_table = meson_ge2d_match,
+	},
+};
+
+module_platform_driver(ge2d_drv);
+
+MODULE_AUTHOR("Neil Armstrong <[email protected]>");
+MODULE_DESCRIPTION("Amlogic 2D Graphic Acceleration Unit");
+MODULE_LICENSE("GPL");

Regards,

Quoted 6 lines
Quoted 2 lines

Hans

Thanks,
Neil

Regards,

Hans

_______________________________________________
linux-amlogic mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-amlogic

#6 lore raw

PATCH v3 3/4 MAINTAINERS: Add myself as maintainer of the Amlogic GE2D driver

In reply to Neil Armstrong
---
 MAINTAINERS | 9 +++++++++
 1 file changed, 9 insertions(+)
MAINTAINERS +9 -0
index e73636b75f29..db93156dcaba 100644
@@ -11412,6 +11412,15 @@ F:	Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml
 F:	drivers/media/cec/platform/meson/ao-cec-g12a.c
 F:	drivers/media/cec/platform/meson/ao-cec.c
 
+MESON GE2D DRIVER FOR AMLOGIC SOCS
+M:	Neil Armstrong <[email protected]>
+L:	[email protected]
+L:	[email protected]
+S:	Supported
+T:	git git://linuxtv.org/media_tree.git
+F:	Documentation/devicetree/bindings/media/amlogic,axg-ge2d.yaml
+F:	drivers/media/meson/ge2d/
+
 MESON NAND CONTROLLER DRIVER FOR AMLOGIC SOCS
 M:	Liang Yang <[email protected]>
 L:	[email protected]
Signature · 1 line
2.25.1
#7 lore raw

PATCH v3 4/4 arm64: dts: meson-axg: add GE2D node

In reply to Neil Armstrong

This adds the node for the GE2D accelerator unit.

---
 arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 9 +++++++++
 1 file changed, 9 insertions(+)
arch/arm64/boot/dts/amlogic/meson-axg.dtsi +9 -0
index b9efc8469265..376f5c3f6188 100644
@@ -1563,6 +1563,15 @@ saradc: adc@9000 {
 			};
 		};
 
+		ge2d: ge2d@ff940000 {
+			compatible = "amlogic,axg-ge2d";
+			reg = <0x0 0xff940000 0x0 0x10000>;
+			interrupts = <GIC_SPI 150 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&clkc CLKID_VAPB>;
+			resets = <&reset RESET_GE2D>;
+			reset-names = "core";
+		};
+
 		gic: interrupt-controller@ffc01000 {
 			compatible = "arm,gic-400";
 			reg = <0x0 0xffc01000 0 0x1000>,
Signature · 1 line
2.25.1
#8 lore raw

Re: [PATCH v3 4/4] arm64: dts: meson-axg: add GE2D node

I love your patch! Yet something to improve:

Hi Neil,

I love your patch! Yet something to improve:

[auto build test ERROR on linuxtv-media/master]
[also build test ERROR on robh/for-next linus/master v5.10-rc4 next-20201117] [If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]

url:    https://github.com/0day-ci/linux/commits/Neil-Armstrong/media-meson-Add-support-for-the-Amlogic-GE2D-Accelerator-Unit/20201117-165009
base:   git://linuxtv.org/media_tree.git master
config: arm64-randconfig-r032-20201116 (attached as .config)
compiler: aarch64-linux-gcc (GCC) 9.3.0

reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# https://github.com/0day-ci/linux/commit/242f1728d8aae72c5328e4c15a20cea8c7ce1492
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review Neil-Armstrong/media-meson-Add-support-for-the-Amlogic-GE2D-Accelerator-Unit/20201117-165009 git checkout 242f1728d8aae72c5328e4c15a20cea8c7ce1492
# save the attached .config to linux build tree
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 make.cross ARCH=arm64

If you fix the issue, kindly add following tag as appropriate

All errors (new ones prefixed by >>):

>> Error: arch/arm64/boot/dts/amlogic/meson-axg.dtsi:1570.20-21 syntax error

FATAL ERROR: Unable to parse input tree

---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all(a)lists.01.org

#9 lore raw
In reply to Neil Armstrong
Quoted 31 lines · Neil Armstrong

The GE2D is a 2D accelerator with various features like configurable blitter with alpha blending, frame rotation, scaling, format conversion and colorspace conversion.

The driver implements a Memory2Memory VB2 V4L2 streaming device permitting:
- 0, 90, 180, 270deg rotation
- horizontal/vertical flipping
- source cropping
- destination compositing
- 32bit/24bit/16bit format conversion

This adds the support for the GE2D version found in the AXG SoCs Family.

The missing features are:
- Source scaling
- Colorspace conversion
- Advanced alpha blending & blitting options

Dependencies:
- Patches 1-3: None
- Patch 4: https://lkml.kernel.org/r/[email protected] (applied for 5.11)

Changes since v2:
- removed error check in and after get_frame()
- moved the v4l2_file_operations lower in the code to avoid adding vidioc_setup_cap_fmt on top
- removed all memcpy of pix_fmt
- simplified & fixed ge2d_start_streaming
- added local buffer type check in vidioc_g_selection instead of using get_frame error
- removed impossible <0 rectangle check, fixed error string
- added comment on condition after V4L2_CID_ROTATE

Quoted 5 lines

Changes since v1:
- Rebased on v5.10-rc1

/ # v4l2-compliance -s
v4l2-compliance SHA: ea16a7ef13a902793a5c2626b0cefc4d956147f3, 64 bits, 64-bit time_t

That's too old: additional checks for CSC handling have been added since that time. It probably won't affect this driver, but still I prefer it if you can update to the latest version and verify that it still passes all the tests.

Regards,

Hans

Quoted 109 lines

Compliance test for meson-ge2d device /dev/video0:

Driver Info:

	Driver name      : meson-ge2d
	Card type        : meson-ge2d
	Bus info         : platform:meson-ge2d
	Driver version   : 5.9.0
	Capabilities     : 0x84208000

Video Memory-to-Memory
Streaming
Extended Pix Format
Device Capabilities
Device Caps : 0x04208000
Video Memory-to-Memory
Streaming
Extended Pix Format

Required ioctls:
test VIDIOC_QUERYCAP: OK

Allow for multiple opens:
test second /dev/video0 open: OK
test VIDIOC_QUERYCAP: OK
test VIDIOC_G/S_PRIORITY: OK
test for unlimited opens: OK

test invalid ioctls: OK
Debug ioctls:
test VIDIOC_DBG_G/S_REGISTER: OK test VIDIOC_LOG_STATUS: OK (Not Supported)

Input ioctls:
test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported) test VIDIOC_G/S_FREQUENCY: OK (Not Supported) test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported) test VIDIOC_ENUMAUDIO: OK (Not Supported)
test VIDIOC_G/S/ENUMINPUT: OK (Not Supported) test VIDIOC_G/S_AUDIO: OK (Not Supported)
Inputs: 0 Audio Inputs: 0 Tuners: 0

Output ioctls:
test VIDIOC_G/S_MODULATOR: OK (Not Supported) test VIDIOC_G/S_FREQUENCY: OK (Not Supported) test VIDIOC_ENUMAUDOUT: OK (Not Supported) test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported) test VIDIOC_G/S_AUDOUT: OK (Not Supported)
Outputs: 0 Audio Outputs: 0 Modulators: 0

Input/Output configuration ioctls:
test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported) test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported) test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported) test VIDIOC_G/S_EDID: OK (Not Supported)

Control ioctls:
test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK test VIDIOC_QUERYCTRL: OK
test VIDIOC_G/S_CTRL: OK
test VIDIOC_G/S/TRY_EXT_CTRLS: OK test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK test VIDIOC_G/S_JPEGCOMP: OK (Not Supported) Standard Controls: 4 Private Controls: 0

Format ioctls:
test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK test VIDIOC_G/S_PARM: OK (Not Supported) test VIDIOC_G_FBUF: OK (Not Supported) test VIDIOC_G_FMT: OK
test VIDIOC_TRY_FMT: OK
test VIDIOC_S_FMT: OK
test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported) test Cropping: OK
test Composing: OK
test Scaling: OK (Not Supported)

Codec ioctls:
test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported) test VIDIOC_G_ENC_INDEX: OK (Not Supported) test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)

Buffer ioctls:
test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK test VIDIOC_EXPBUF: OK
test Requests: OK (Not Supported)

Test input 0:

Streaming ioctls:
test read/write: OK (Not Supported)
test blocking wait: OK
Video Capture: Captured 58 buffers
test MMAP (no poll): OK
Video Capture: Captured 58 buffers
test MMAP (select): OK
Video Capture: Captured 58 buffers
test MMAP (epoll): OK
test USERPTR (no poll): OK (Not Supported) test USERPTR (select): OK (Not Supported) test DMABUF: Cannot test, specify --expbuf-device

Total for meson-ge2d device /dev/video0: 52, Succeeded: 52, Failed: 0, Warnings: 0

Neil Armstrong (4):
dt-bindings: media: Add bindings for the Amlogic GE2D Accelerator Unit
media: meson: Add M2M driver for the Amlogic GE2D Accelerator Unit
MAINTAINERS: Add myself as maintainer of the Amlogic GE2D driver
arm64: dts: meson-axg: add GE2D node

Quoted 14 lines
 .../bindings/media/amlogic,axg-ge2d.yaml      |   47 +
 MAINTAINERS                                   |    9 +
 arch/arm64/boot/dts/amlogic/meson-axg.dtsi    |    9 +
 drivers/media/platform/Kconfig                |   13 +
 drivers/media/platform/Makefile               |    2 +
 drivers/media/platform/meson/ge2d/Makefile    |    3 +
 drivers/media/platform/meson/ge2d/ge2d-regs.h |  360 ++++++
 drivers/media/platform/meson/ge2d/ge2d.c      | 1091 +++++++++++++++++
 8 files changed, 1534 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/amlogic,axg-ge2d.yaml
 create mode 100644 drivers/media/platform/meson/ge2d/Makefile
 create mode 100644 drivers/media/platform/meson/ge2d/ge2d-regs.h
 create mode 100644 drivers/media/platform/meson/ge2d/ge2d.c

_______________________________________________
linux-amlogic mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-amlogic

#10 lore raw

Hi,

Quoted 35 lines · Hans Verkuil
Quoted 34 lines · Neil Armstrong

The GE2D is a 2D accelerator with various features like configurable blitter with alpha blending, frame rotation, scaling, format conversion and colorspace conversion.

The driver implements a Memory2Memory VB2 V4L2 streaming device permitting:
- 0, 90, 180, 270deg rotation
- horizontal/vertical flipping
- source cropping
- destination compositing
- 32bit/24bit/16bit format conversion

This adds the support for the GE2D version found in the AXG SoCs Family.

The missing features are:
- Source scaling
- Colorspace conversion
- Advanced alpha blending & blitting options

Dependencies:
- Patches 1-3: None
- Patch 4: https://lkml.kernel.org/r/[email protected] (applied for 5.11)

Changes since v2:
- removed error check in and after get_frame()
- moved the v4l2_file_operations lower in the code to avoid adding vidioc_setup_cap_fmt on top
- removed all memcpy of pix_fmt
- simplified & fixed ge2d_start_streaming
- added local buffer type check in vidioc_g_selection instead of using get_frame error
- removed impossible <0 rectangle check, fixed error string
- added comment on condition after V4L2_CID_ROTATE

Changes since v1:
- Rebased on v5.10-rc1

Quoted 6 lines
Quoted 2 lines

/ # v4l2-compliance -s
v4l2-compliance SHA: ea16a7ef13a902793a5c2626b0cefc4d956147f3, 64 bits, 64-bit time_t

That's too old: additional checks for CSC handling have been added since that time. It probably won't affect this driver, but still I prefer it if you can update to the latest version and verify that it still passes all the tests.

Ok

Neil

Quoted 129 lines

Regards,

Hans

Quoted 123 lines

Compliance test for meson-ge2d device /dev/video0:

Driver Info:

	Driver name      : meson-ge2d
	Card type        : meson-ge2d
	Bus info         : platform:meson-ge2d
	Driver version   : 5.9.0
	Capabilities     : 0x84208000

Video Memory-to-Memory
Streaming
Extended Pix Format
Device Capabilities
Device Caps : 0x04208000
Video Memory-to-Memory
Streaming
Extended Pix Format

Required ioctls:
test VIDIOC_QUERYCAP: OK

Allow for multiple opens:
test second /dev/video0 open: OK
test VIDIOC_QUERYCAP: OK
test VIDIOC_G/S_PRIORITY: OK
test for unlimited opens: OK

test invalid ioctls: OK
Debug ioctls:
test VIDIOC_DBG_G/S_REGISTER: OK test VIDIOC_LOG_STATUS: OK (Not Supported)

Input ioctls:
test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported) test VIDIOC_G/S_FREQUENCY: OK (Not Supported) test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported) test VIDIOC_ENUMAUDIO: OK (Not Supported)
test VIDIOC_G/S/ENUMINPUT: OK (Not Supported) test VIDIOC_G/S_AUDIO: OK (Not Supported)
Inputs: 0 Audio Inputs: 0 Tuners: 0

Output ioctls:
test VIDIOC_G/S_MODULATOR: OK (Not Supported) test VIDIOC_G/S_FREQUENCY: OK (Not Supported) test VIDIOC_ENUMAUDOUT: OK (Not Supported) test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported) test VIDIOC_G/S_AUDOUT: OK (Not Supported)
Outputs: 0 Audio Outputs: 0 Modulators: 0

Input/Output configuration ioctls:
test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported) test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported) test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported) test VIDIOC_G/S_EDID: OK (Not Supported)

Control ioctls:
test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK test VIDIOC_QUERYCTRL: OK
test VIDIOC_G/S_CTRL: OK
test VIDIOC_G/S/TRY_EXT_CTRLS: OK test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK test VIDIOC_G/S_JPEGCOMP: OK (Not Supported) Standard Controls: 4 Private Controls: 0

Format ioctls:
test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK test VIDIOC_G/S_PARM: OK (Not Supported) test VIDIOC_G_FBUF: OK (Not Supported) test VIDIOC_G_FMT: OK
test VIDIOC_TRY_FMT: OK
test VIDIOC_S_FMT: OK
test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported) test Cropping: OK
test Composing: OK
test Scaling: OK (Not Supported)

Codec ioctls:
test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported) test VIDIOC_G_ENC_INDEX: OK (Not Supported) test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)

Buffer ioctls:
test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK test VIDIOC_EXPBUF: OK
test Requests: OK (Not Supported)

Test input 0:

Streaming ioctls:
test read/write: OK (Not Supported)
test blocking wait: OK
Video Capture: Captured 58 buffers
test MMAP (no poll): OK
Video Capture: Captured 58 buffers
test MMAP (select): OK
Video Capture: Captured 58 buffers
test MMAP (epoll): OK
test USERPTR (no poll): OK (Not Supported) test USERPTR (select): OK (Not Supported) test DMABUF: Cannot test, specify --expbuf-device

Total for meson-ge2d device /dev/video0: 52, Succeeded: 52, Failed: 0, Warnings: 0

Neil Armstrong (4):
dt-bindings: media: Add bindings for the Amlogic GE2D Accelerator Unit
media: meson: Add M2M driver for the Amlogic GE2D Accelerator Unit
MAINTAINERS: Add myself as maintainer of the Amlogic GE2D driver
arm64: dts: meson-axg: add GE2D node

 .../bindings/media/amlogic,axg-ge2d.yaml      |   47 +
 MAINTAINERS                                   |    9 +
 arch/arm64/boot/dts/amlogic/meson-axg.dtsi    |    9 +
 drivers/media/platform/Kconfig                |   13 +
 drivers/media/platform/Makefile               |    2 +
 drivers/media/platform/meson/ge2d/Makefile    |    3 +
 drivers/media/platform/meson/ge2d/ge2d-regs.h |  360 ++++++
 drivers/media/platform/meson/ge2d/ge2d.c      | 1091 +++++++++++++++++
 8 files changed, 1534 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/amlogic,axg-ge2d.yaml
 create mode 100644 drivers/media/platform/meson/ge2d/Makefile
 create mode 100644 drivers/media/platform/meson/ge2d/ge2d-regs.h
 create mode 100644 drivers/media/platform/meson/ge2d/ge2d.c

_______________________________________________
linux-amlogic mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-amlogic

#11 lore raw
In reply to Neil Armstrong

Le mardi 17 novembre 2020 à 09:44 +0100, Neil Armstrong a écrit :

Quoted 11 lines

The GE2D is a 2D accelerator with various features like configurable blitter with alpha blending, frame rotation, scaling, format conversion and colorspace conversion.

The driver implements a Memory2Memory VB2 V4L2 streaming device permitting:
- 0, 90, 180, 270deg rotation
- horizontal/vertical flipping
- source cropping
- destination compositing
- 32bit/24bit/16bit format conversion

Quoted 6 lines

This adds the support for the GE2D version found in the AXG SoCs Family.

The missing features are:
- Source scaling
- Colorspace conversion
- Advanced alpha blending & blitting options

Is there some Open Source software using this driver ? GStreamer got some support, but it's mostly focused on CSC and Scaling (flipping should work, but rotation is not implemented). But I'm not aware of anything else, hence asking.

Quoted 142 lines

Dependencies:
- Patches 1-3: None
- Patch 4:
https://lkml.kernel.org/r/[email protected] (appli
ed for 5.11)

Changes since v2:
- removed error check in and after get_frame()
- moved the v4l2_file_operations lower in the code to avoid adding vidioc_setup_cap_fmt on top
- removed all memcpy of pix_fmt
- simplified & fixed ge2d_start_streaming
- added local buffer type check in vidioc_g_selection instead of using get_frame error
- removed impossible <0 rectangle check, fixed error string
- added comment on condition after V4L2_CID_ROTATE

Changes since v1:
- Rebased on v5.10-rc1

/ # v4l2-compliance -s
v4l2-compliance SHA: ea16a7ef13a902793a5c2626b0cefc4d956147f3, 64 bits, 64-bit time_t

Compliance test for meson-ge2d device /dev/video0:

Driver Info:
        Driver name      : meson-ge2d
        Card type        : meson-ge2d
        Bus info         : platform:meson-ge2d
        Driver version   : 5.9.0
        Capabilities     : 0x84208000
                Video Memory-to-Memory
                Streaming
                Extended Pix Format
                Device Capabilities
        Device Caps      : 0x04208000
                Video Memory-to-Memory
                Streaming
                Extended Pix Format

Required ioctls:
        test VIDIOC_QUERYCAP: OK

Allow for multiple opens:
        test second /dev/video0 open: OK
        test VIDIOC_QUERYCAP: OK
        test VIDIOC_G/S_PRIORITY: OK
        test for unlimited opens: OK

        test invalid ioctls: OK
Debug ioctls:
        test VIDIOC_DBG_G/S_REGISTER: OK test VIDIOC_LOG_STATUS: OK (Not Supported)

Input ioctls:
        test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported) test VIDIOC_G/S_FREQUENCY: OK (Not Supported) test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported) test VIDIOC_ENUMAUDIO: OK (Not Supported)
        test VIDIOC_G/S/ENUMINPUT: OK (Not Supported) test VIDIOC_G/S_AUDIO: OK (Not Supported)
        Inputs: 0 Audio Inputs: 0 Tuners: 0

Output ioctls:
        test VIDIOC_G/S_MODULATOR: OK (Not Supported) test VIDIOC_G/S_FREQUENCY: OK (Not Supported) test VIDIOC_ENUMAUDOUT: OK (Not Supported) test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported) test VIDIOC_G/S_AUDOUT: OK (Not Supported)
        Outputs: 0 Audio Outputs: 0 Modulators: 0

Input/Output configuration ioctls:
        test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported) test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported) test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported) test VIDIOC_G/S_EDID: OK (Not Supported)

Control ioctls:
        test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK test VIDIOC_QUERYCTRL: OK
        test VIDIOC_G/S_CTRL: OK
        test VIDIOC_G/S/TRY_EXT_CTRLS: OK test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK test VIDIOC_G/S_JPEGCOMP: OK (Not Supported) Standard Controls: 4 Private Controls: 0

Format ioctls:
        test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK test VIDIOC_G/S_PARM: OK (Not Supported) test VIDIOC_G_FBUF: OK (Not Supported) test VIDIOC_G_FMT: OK
        test VIDIOC_TRY_FMT: OK
        test VIDIOC_S_FMT: OK
        test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported) test Cropping: OK
        test Composing: OK
        test Scaling: OK (Not Supported)

Codec ioctls:
        test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported) test VIDIOC_G_ENC_INDEX: OK (Not Supported) test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)

Buffer ioctls:
        test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK test VIDIOC_EXPBUF: OK
        test Requests: OK (Not Supported)

Test input 0:

Streaming ioctls:
        test read/write: OK (Not Supported)
        test blocking wait: OK
        Video Capture: Captured 58 buffers
        test MMAP (no poll): OK
        Video Capture: Captured 58 buffers
        test MMAP (select): OK
        Video Capture: Captured 58 buffers
        test MMAP (epoll): OK
        test USERPTR (no poll): OK (Not Supported) test USERPTR (select): OK (Not Supported) test DMABUF: Cannot test, specify --expbuf-device

Total for meson-ge2d device /dev/video0: 52, Succeeded: 52, Failed: 0,
Warnings: 0

Neil Armstrong (4):
  dt-bindings: media: Add bindings for the Amlogic GE2D Accelerator Unit
  media: meson: Add M2M driver for the Amlogic GE2D Accelerator Unit
  MAINTAINERS: Add myself as maintainer of the Amlogic GE2D driver
  arm64: dts: meson-axg: add GE2D node

 .../bindings/media/amlogic,axg-ge2d.yaml      |   47 + MAINTAINERS                                   |    9 + arch/arm64/boot/dts/amlogic/meson-axg.dtsi    |    9 + drivers/media/platform/Kconfig                |   13 + drivers/media/platform/Makefile               |    2 + drivers/media/platform/meson/ge2d/Makefile    |    3 + drivers/media/platform/meson/ge2d/ge2d-regs.h |  360 ++++++ drivers/media/platform/meson/ge2d/ge2d.c      | 1091 +++++++++++++++++

Quoted 7 lines
 8 files changed, 1534 insertions(+)

 create mode 100644 Documentation/devicetree/bindings/media/amlogic,axg- ge2d.yaml
 create mode 100644 drivers/media/platform/meson/ge2d/Makefile create mode 100644 drivers/media/platform/meson/ge2d/ge2d-regs.h create mode 100644 drivers/media/platform/meson/ge2d/ge2d.c

_______________________________________________
linux-amlogic mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-amlogic

#12 lore raw

Hi,

Quoted 14 lines · Nicolas Dufresne

Le mardi 17 novembre 2020 à 09:44 +0100, Neil Armstrong a écrit :

Quoted 13 lines

The GE2D is a 2D accelerator with various features like configurable blitter with alpha blending, frame rotation, scaling, format conversion and colorspace conversion.

The driver implements a Memory2Memory VB2 V4L2 streaming device permitting:
- 0, 90, 180, 270deg rotation
- horizontal/vertical flipping
- source cropping
- destination compositing
- 32bit/24bit/16bit format conversion

This adds the support for the GE2D version found in the AXG SoCs Family.

Quoted 8 lines
Quoted 4 lines

The missing features are:
- Source scaling
- Colorspace conversion
- Advanced alpha blending & blitting options

Is there some Open Source software using this driver ? GStreamer got some support, but it's mostly focused on CSC and Scaling (flipping should work, but rotation is not implemented). But I'm not aware of anything else, hence asking.

Rotation orks with gstreamer by tweaking the rotation control manually and forcing the reversed height/width after the v4l2convert.
Apart that, I made it works with the LVGL UI library to accelerate buffers switching and blitting on the DRM buffers.

Neil

Quoted 135 lines
Quoted 135 lines

Dependencies:
- Patches 1-3: None
- Patch 4:
https://lkml.kernel.org/r/[email protected] (appli
ed for 5.11)

Changes since v2:
- removed error check in and after get_frame()
- moved the v4l2_file_operations lower in the code to avoid adding vidioc_setup_cap_fmt on top
- removed all memcpy of pix_fmt
- simplified & fixed ge2d_start_streaming
- added local buffer type check in vidioc_g_selection instead of using get_frame error
- removed impossible <0 rectangle check, fixed error string
- added comment on condition after V4L2_CID_ROTATE

Changes since v1:
- Rebased on v5.10-rc1

/ # v4l2-compliance -s
v4l2-compliance SHA: ea16a7ef13a902793a5c2626b0cefc4d956147f3, 64 bits, 64-bit time_t

Compliance test for meson-ge2d device /dev/video0:

Driver Info:
        Driver name      : meson-ge2d
        Card type        : meson-ge2d
        Bus info         : platform:meson-ge2d
        Driver version   : 5.9.0
        Capabilities     : 0x84208000
                Video Memory-to-Memory
                Streaming
                Extended Pix Format
                Device Capabilities
        Device Caps      : 0x04208000
                Video Memory-to-Memory
                Streaming
                Extended Pix Format

Required ioctls:
        test VIDIOC_QUERYCAP: OK

Allow for multiple opens:
        test second /dev/video0 open: OK
        test VIDIOC_QUERYCAP: OK
        test VIDIOC_G/S_PRIORITY: OK
        test for unlimited opens: OK

        test invalid ioctls: OK
Debug ioctls:
        test VIDIOC_DBG_G/S_REGISTER: OK test VIDIOC_LOG_STATUS: OK (Not Supported)

Input ioctls:
        test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported) test VIDIOC_G/S_FREQUENCY: OK (Not Supported) test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported) test VIDIOC_ENUMAUDIO: OK (Not Supported)
        test VIDIOC_G/S/ENUMINPUT: OK (Not Supported) test VIDIOC_G/S_AUDIO: OK (Not Supported)
        Inputs: 0 Audio Inputs: 0 Tuners: 0

Output ioctls:
        test VIDIOC_G/S_MODULATOR: OK (Not Supported) test VIDIOC_G/S_FREQUENCY: OK (Not Supported) test VIDIOC_ENUMAUDOUT: OK (Not Supported) test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported) test VIDIOC_G/S_AUDOUT: OK (Not Supported)
        Outputs: 0 Audio Outputs: 0 Modulators: 0

Input/Output configuration ioctls:
        test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported) test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported) test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported) test VIDIOC_G/S_EDID: OK (Not Supported)

Control ioctls:
        test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK test VIDIOC_QUERYCTRL: OK
        test VIDIOC_G/S_CTRL: OK
        test VIDIOC_G/S/TRY_EXT_CTRLS: OK test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK test VIDIOC_G/S_JPEGCOMP: OK (Not Supported) Standard Controls: 4 Private Controls: 0

Format ioctls:
        test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK test VIDIOC_G/S_PARM: OK (Not Supported) test VIDIOC_G_FBUF: OK (Not Supported) test VIDIOC_G_FMT: OK
        test VIDIOC_TRY_FMT: OK
        test VIDIOC_S_FMT: OK
        test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported) test Cropping: OK
        test Composing: OK
        test Scaling: OK (Not Supported)

Codec ioctls:
        test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported) test VIDIOC_G_ENC_INDEX: OK (Not Supported) test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)

Buffer ioctls:
        test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK test VIDIOC_EXPBUF: OK
        test Requests: OK (Not Supported)

Test input 0:

Streaming ioctls:
        test read/write: OK (Not Supported)
        test blocking wait: OK
        Video Capture: Captured 58 buffers
        test MMAP (no poll): OK
        Video Capture: Captured 58 buffers
        test MMAP (select): OK
        Video Capture: Captured 58 buffers
        test MMAP (epoll): OK
        test USERPTR (no poll): OK (Not Supported) test USERPTR (select): OK (Not Supported) test DMABUF: Cannot test, specify --expbuf-device

Total for meson-ge2d device /dev/video0: 52, Succeeded: 52, Failed: 0,
Warnings: 0

Neil Armstrong (4):
  dt-bindings: media: Add bindings for the Amlogic GE2D Accelerator Unit
  media: meson: Add M2M driver for the Amlogic GE2D Accelerator Unit
  MAINTAINERS: Add myself as maintainer of the Amlogic GE2D driver
  arm64: dts: meson-axg: add GE2D node

Quoted 17 lines
Quoted 8 lines

 .../bindings/media/amlogic,axg-ge2d.yaml      |   47 + MAINTAINERS                                   |    9 + arch/arm64/boot/dts/amlogic/meson-axg.dtsi    |    9 + drivers/media/platform/Kconfig                |   13 + drivers/media/platform/Makefile               |    2 + drivers/media/platform/meson/ge2d/Makefile    |    3 + drivers/media/platform/meson/ge2d/ge2d-regs.h |  360 ++++++ drivers/media/platform/meson/ge2d/ge2d.c      | 1091 +++++++++++++++++

Quoted 7 lines
 8 files changed, 1534 insertions(+)

 create mode 100644 Documentation/devicetree/bindings/media/amlogic,axg- ge2d.yaml
 create mode 100644 drivers/media/platform/meson/ge2d/Makefile create mode 100644 drivers/media/platform/meson/ge2d/ge2d-regs.h create mode 100644 drivers/media/platform/meson/ge2d/ge2d.c

_______________________________________________
linux-amlogic mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-amlogic