Enable Checksum Offloading for NEON vector
cover Enable Checksum Offloading for NEON vector
This patch series are mainly to enable checksum offloading for IXGBE NEON vector PMD, including good and bad checksum flags. In the meanwhile, the first patch enable VLAN stripping flag for Arm.
Feifei Wang (4):
net/ixgbe: add VLAN stripping support for Arm net/ixgbe: support checksum flags for NEON vector net/ixgbe: implement good checksum flag for NEON vector net/ixgbe: enable IXGBE NEON vector PMD when CHECKSUM is set
drivers/net/ixgbe/ixgbe_rxtx_vec_neon.c | 94 ++++++++++++++++++------- 1 file changed, 68 insertions(+), 26 deletions(-)
Signature · 1 line
2.17.1
PATCH 1/4 net/ixgbe: add VLAN stripping support for Arm
Implemented PKT_RX_VLAN_STRIPPED for vector PMD on Arm platform.
Test Results:
NICs: 82599(igb)
Dirver: ixgbe(vector)
Packet: vlan-id=1
$:./app/dpdk-testpmd -c 0x3 -w 0002:f9:00.0 -- -i --port-topology=chained \
to enable vlan stripping: --enable-hw-vlan-strip
test-pmd> set fwd rxonly
test-pmd> set verbose 1
test-pmd> start
With this patch:
%enable vlan stripping:
testpmd> port 0/queue 0: received 1 packets
src=00:00:00:00:00:02 - dst=00:00:00:00:00:01 - type=0x0800 - length=70 - nb_segs=1 - VLAN tci=0x1ol_flags: PKT_RX_VLAN PKT_RX_VLAN_STRIPPED
%disable vlan stripping:
testpmd> port 0/queue 0: received 1 packets
src=00:00:00:00:00:02 - dst=00:00:00:00:00:01 - type=0x8100 - length=74 - nb_segs=1 - VLAN tci=0x0ol_flags: PKT_RX_VLAN
_________________________
Without this patch:
%enable vlan stripping:
testpmd> port 0/queue 0: received 1 packets
src=00:00:00:00:00:02 - dst=00:00:00:00:00:01 - type=0x0800 - length=70 - nb_segs=1 - VLAN tci=0x1ol_flags: PKT_RX_VLAN
%disable vlan stripping:
testpmd> port 0/queue 0: received 1 packets
src=00:00:00:00:00:02 - dst=00:00:00:00:00:01 - type=0x8100 - length=74 - nb_segs=1 - VLAN tci=0x0ol_flags: PKT_RX_VLAN
--- drivers/net/ixgbe/ixgbe_rxtx_vec_neon.c | 36 ++++++++++++++++--------- 1 file changed, 23 insertions(+), 13 deletions(-)
drivers/net/ixgbe/ixgbe_rxtx_vec_neon.c +23 -13
@@ -81,11 +81,9 @@ ixgbe_rxq_rearm(struct ixgbe_rx_queue *rxq)IXGBE_PCI_REG_WRITE (rxq->rdt_reg_addr, rx_id); } -#define VTAG_SHIFT (3) -static inline void desc_to_olflags_v (uint8x16x2_t sterr_tmp1,uint8x16x2_t sterr_tmp2, -uint8x16_t staterr,struct rte_mbuf **rx_pkts) +uint8x16_t staterr,uint8_t vlan_flags,struct rte_mbuf **rx_pkts) {uint8x16_t ptype;uint8x16_t vtag;
@@ -95,13 +93,6 @@ desc_to_olflags_v(uint8x16x2_t sterr_tmp1, uint8x16x2_t sterr_tmp2,uint32_t word; } vol; -const uint8x16_t pkttype_msk = { -PKT_RX_VLAN ,PKT_RX_VLAN , -PKT_RX_VLAN ,PKT_RX_VLAN , -0x00 ,0x00 ,0x00 ,0x00 , -0x00 ,0x00 ,0x00 ,0x00 , -0x00 ,0x00 ,0x00 ,0x00 }; -const uint8x16_t rsstype_msk = {0x0F ,0x0F ,0x0F ,0x0F ,0x00 ,0x00 ,0x00 ,0x00 ,
@@ -114,12 +105,26 @@ desc_to_olflags_v(uint8x16x2_t sterr_tmp1, uint8x16x2_t sterr_tmp2,PKT_RX_RSS_HASH ,0 ,0 ,0 , 0, 0, 0, PKT_RX_FDIR}; +const uint8x16_t vlan_msk = { +IXGBE_RXD_STAT_VP ,IXGBE_RXD_STAT_VP , +IXGBE_RXD_STAT_VP ,IXGBE_RXD_STAT_VP , +0 ,0 ,0 ,0 , +0 ,0 ,0 ,0 , +0 ,0 ,0 ,0 }; + +const uint8x16_t vlan_map = { +0 ,0 ,0 ,0 , +0 ,0 ,0 ,0 , + vlan_flags,0 ,0 ,0 , +0 ,0 ,0 ,0 }; + ptype =vzipq_u8 (sterr_tmp1.val[0 ], sterr_tmp2.val[0 ]).val[0 ]; ptype =vandq_u8 (ptype, rsstype_msk); ptype =vqtbl1q_u8 (rss_flags, ptype); - vtag =vshrq_n_u8 (staterr,VTAG_SHIFT ); - vtag =vandq_u8 (vtag, pkttype_msk); +/* extract vlan_flags from IXGBE_RXD_STAT_VP bits of staterr */ + vtag =vandq_u8 (staterr, vlan_msk); + vtag =vqtbl1q_u8 (vlan_map, vtag); vtag =vorrq_u8 (ptype, vtag); vol.word =vgetq_lane_u32 (vreinterpretq_u32_u8 (vtag),0 );
@@ -221,6 +226,7 @@ _recv_raw_pkts_vec(struct ixgbe_rx_queue *rxq, struct rte_mbuf **rx_pkts, };uint16x8_t crc_adjust = {0 ,0 , rxq->crc_len,0 , rxq->crc_len,0 ,0 ,0 }; +uint8_t vlan_flags;/* nb_pkts has to be floor-aligned to RTE_IXGBE_DESCS_PER_LOOP */ nb_pkts =RTE_ALIGN_FLOOR (nb_pkts,RTE_IXGBE_DESCS_PER_LOOP );
@@ -250,6 +256,10 @@ _recv_raw_pkts_vec(struct ixgbe_rx_queue *rxq, struct rte_mbuf **rx_pkts,*/ sw_ring = &rxq->sw_ring[rxq->rx_tail]; +/* ensure these 2 flags are in the lower 8 bits */ +RTE_BUILD_BUG_ON ((PKT_RX_VLAN |PKT_RX_VLAN_STRIPPED ) >UINT8_MAX ); + vlan_flags = rxq->vlan_flags &UINT8_MAX ; +/* A. load 4 packet in one loop * B. copy 4 mbuf point from swring to rx_pkts * C. calc the number of DD bits among the 4 packets
@@ -311,7 +321,7 @@ _recv_raw_pkts_vec(struct ixgbe_rx_queue *rxq, struct rte_mbuf **rx_pkts, staterr =vzipq_u8 (sterr_tmp1.val[1 ], sterr_tmp2.val[1 ]).val[0 ];/* set ol_flags with vlan packet type */ -desc_to_olflags_v (sterr_tmp1, sterr_tmp2, staterr, +desc_to_olflags_v (sterr_tmp1, sterr_tmp2, staterr, vlan_flags, &rx_pkts[pos]);/* D.2 pkt 3,4 set in_port/nb_seg and remove crc */
Signature · 1 line
2.17.1
PATCH 2/4 net/ixgbe: support checksum flags for NEON vector
In reply to Feifei WangUpdated desc_to_olflags_v() to support PKT_RX_IP_CKSUM_BAD and PKT_RX_L4_CKSUM_BAD in the ol_flags of the mbuf for Arm neon vector Rx function.
Test Results:
NICs: 82599(igb)
Dirver: ixgbe(vector)
Packet: IPv4_checksum = 0xee && UDP_checksum = 0xee
$:./app/dpdk-testpmd -c 0x3 -w 0002:f9:00.0 -- -i --port-topology=chained test-pmd> set fwd rxonly
test-pmd> set verbose 1
test-pmd> start
With this patch:
testpmd> port 0/queue 0: received 1 packets
src=00:00:00:00:00:02 - dst=00:00:00:00:00:01 - type=0x0800 - length=70 - nb_segs=1ol_flags: PKT_RX_L4_CKSUM_BAD PKT_RX_IP_CKSUM_BAD
Without this patch:
testpmd> port 0/queue 0: received 1 packets
src=00:00:00:00:00:02 - dst=00:00:00:00:00:01 - type=0x0800 - length=70 - nb_segs=1ol_flags: PKT_RX_L4_CKSUM_UNKNOWN PKT_RX_IP_CKSUM_UNKNOWN
--- drivers/net/ixgbe/ixgbe_rxtx_vec_neon.c | 47 +++++++++++++++++++------ 1 file changed, 36 insertions(+), 11 deletions(-)
drivers/net/ixgbe/ixgbe_rxtx_vec_neon.c +36 -11
@@ -87,6 +87,8 @@ desc_to_olflags_v(uint8x16x2_t sterr_tmp1, uint8x16x2_t sterr_tmp2, {uint8x16_t ptype;uint8x16_t vtag; +uint8x16_t temp_csum; +uint32x4_t csum = {0 ,0 ,0 ,0 };union {uint8_t e[4 ];
@@ -105,26 +107,51 @@ desc_to_olflags_v(uint8x16x2_t sterr_tmp1, uint8x16x2_t sterr_tmp2,PKT_RX_RSS_HASH ,0 ,0 ,0 , 0, 0, 0, PKT_RX_FDIR}; -const uint8x16_t vlan_msk = { +/* mask everything except vlan present and l4/ip csum error */ +const uint8x16_t vlan_csum_msk = {IXGBE_RXD_STAT_VP ,IXGBE_RXD_STAT_VP ,IXGBE_RXD_STAT_VP ,IXGBE_RXD_STAT_VP ,0 ,0 ,0 ,0 ,0 ,0 ,0 ,0 , -0 ,0 ,0 ,0 }; - -const uint8x16_t vlan_map = { + (IXGBE_RXDADV_ERR_TCPE |IXGBE_RXDADV_ERR_IPE ) >>24 , + (IXGBE_RXDADV_ERR_TCPE |IXGBE_RXDADV_ERR_IPE ) >>24 , + (IXGBE_RXDADV_ERR_TCPE |IXGBE_RXDADV_ERR_IPE ) >>24 , + (IXGBE_RXDADV_ERR_TCPE |IXGBE_RXDADV_ERR_IPE ) >>24 }; + +/* map vlan present (0x8), IPE (0x2), L4E (0x1) to ol_flags */ +const uint8x16_t vlan_csum_map = { +0 , +PKT_RX_L4_CKSUM_BAD , +PKT_RX_IP_CKSUM_BAD , +PKT_RX_IP_CKSUM_BAD |PKT_RX_L4_CKSUM_BAD ,0 ,0 ,0 ,0 , -0 ,0 ,0 ,0 , - vlan_flags,0 ,0 ,0 , + vlan_flags, + vlan_flags |PKT_RX_L4_CKSUM_BAD , + vlan_flags |PKT_RX_IP_CKSUM_BAD , + vlan_flags |PKT_RX_IP_CKSUM_BAD |PKT_RX_L4_CKSUM_BAD ,0 ,0 ,0 ,0 }; ptype =vzipq_u8 (sterr_tmp1.val[0 ], sterr_tmp2.val[0 ]).val[0 ]; ptype =vandq_u8 (ptype, rsstype_msk); ptype =vqtbl1q_u8 (rss_flags, ptype); -/* extract vlan_flags from IXGBE_RXD_STAT_VP bits of staterr */ - vtag =vandq_u8 (staterr, vlan_msk); - vtag =vqtbl1q_u8 (vlan_map, vtag); +/* extract vlan_flags and csum_error from staterr */ + vtag =vandq_u8 (staterr, vlan_csum_msk); + +/* csum bits are in the most significant, to use shuffle we need to +* shift them. Change mask from 0xc0 to 0x03. +*/ + temp_csum =vshrq_n_u8 (vtag,6 ); + +/* 'OR' the most significant 32 bits containing the checksum +* flags with the vlan present flags +* Then bits layout of each lane(8bits) will be 'xxxx,VP,x,IPE,L4E' +*/ + csum =vsetq_lane_u32 (vgetq_lane_u32 (vreinterpretq_u32_u8 (temp_csum),3 ), csum,0 ); + vtag =vorrq_u8 (vreinterpretq_u8_u32 (csum), vtag); + +/* convert VP, IPE, L4E to ol_flags */ + vtag =vqtbl1q_u8 (vlan_csum_map, vtag); vtag =vorrq_u8 (ptype, vtag); vol.word =vgetq_lane_u32 (vreinterpretq_u32_u8 (vtag),0 );
@@ -391,7 +418,6 @@ _recv_raw_pkts_vec(struct ixgbe_rx_queue *rxq, struct rte_mbuf **rx_pkts,* Notice: * - nb_pkts < RTE_IXGBE_DESCS_PER_LOOP, just return no packet * - floor align nb_pkts to a RTE_IXGBE_DESC_PER_LOOP power-of-two -* - don't support ol_flags for rss and csum err */ uint16_t ixgbe_recv_pkts_vec(void *rx_queue, struct rte_mbuf **rx_pkts,
@@ -404,7 +430,6 @@ ixgbe_recv_pkts_vec(void *rx_queue, struct rte_mbuf **rx_pkts,* vPMD receive routine that reassembles scattered packets * * Notice: -* - don't support ol_flags for rss and csum err * - nb_pkts < RTE_IXGBE_DESCS_PER_LOOP, just return no packet * - floor align nb_pkts to a RTE_IXGBE_DESC_PER_LOOP power-of-two */
Signature · 1 line
2.17.1
PATCH 3/4 net/ixgbe: implement good checksum flag for NEON vector
In reply to Feifei WangFrom: feiwan02 <[email protected]>
Add CKSUM_GOOD flag to distinguish a good checksum from an unknown one in neon vertor RX function.
Test Results:
NICs: 82599(igb)
Dirver: ixgbe(vector)
Packet: IPv4_checksum = correct value && UDP_checksum = correct value
$:./app/dpdk-testpmd -c 0x3 -w 0002:f9:00.0 -- -i --port-topology=chained test-pmd> set fwd rxonly
test-pmd> set verbose 1
test-pmd> start
With this patch:
testpmd> port 0/queue 0: received 1 packets
src=00:00:00:00:00:02 - dst=00:00:00:00:00:01 - type=0x0800 - length=70 - nb_segs=1ol_flags: PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD
Without this patch:
testpmd> port 0/queue 0: received 1 packets
src=00:00:00:00:00:02 - dst=00:00:00:00:00:01 - type=0x0800 - length=70 - nb_segs=1ol_flags: PKT_RX_L4_CKSUM_UNKNOWN PKT_RX_IP_CKSUM_UNKNOWN
--- drivers/net/ixgbe/ixgbe_rxtx_vec_neon.c | 37 +++++++++++++++++-------- 1 file changed, 25 insertions(+), 12 deletions(-)
drivers/net/ixgbe/ixgbe_rxtx_vec_neon.c +25 -12
@@ -86,13 +86,13 @@ desc_to_olflags_v(uint8x16x2_t sterr_tmp1, uint8x16x2_t sterr_tmp2, uint8x16_t staterr, uint8_t vlan_flags, struct rte_mbuf **rx_pkts) { uint8x16_t ptype; -uint8x16_t vtag; +uint8x16_t vtag_lo, vtag_hi, vtag;uint8x16_t temp_csum;uint32x4_t csum = {0 ,0 ,0 ,0 };union { -uint8_t e[4 ]; -uint32_t word; +uint16_t e[4 ]; +uint64_t word; } vol; const uint8x16_t rsstype_msk = {
@@ -119,18 +119,26 @@ desc_to_olflags_v(uint8x16x2_t sterr_tmp1, uint8x16x2_t sterr_tmp2, (IXGBE_RXDADV_ERR_TCPE | IXGBE_RXDADV_ERR_IPE) >> 24};/* map vlan present (0x8), IPE (0x2), L4E (0x1) to ol_flags */ -const uint8x16_t vlan_csum_map = { -0 , -PKT_RX_L4_CKSUM_BAD , +const uint8x16_t vlan_csum_map_lo = { +PKT_RX_IP_CKSUM_GOOD , +PKT_RX_IP_CKSUM_GOOD |PKT_RX_L4_CKSUM_BAD ,PKT_RX_IP_CKSUM_BAD ,PKT_RX_IP_CKSUM_BAD |PKT_RX_L4_CKSUM_BAD ,0 ,0 ,0 ,0 , - vlan_flags, - vlan_flags |PKT_RX_L4_CKSUM_BAD , + vlan_flags |PKT_RX_IP_CKSUM_GOOD , + vlan_flags |PKT_RX_IP_CKSUM_GOOD |PKT_RX_L4_CKSUM_BAD , vlan_flags |PKT_RX_IP_CKSUM_BAD , vlan_flags |PKT_RX_IP_CKSUM_BAD |PKT_RX_L4_CKSUM_BAD ,0 ,0 ,0 ,0 }; +const uint8x16_t vlan_csum_map_hi = { +PKT_RX_L4_CKSUM_GOOD >>sizeof (uint8_t ),0 , +PKT_RX_L4_CKSUM_GOOD >>sizeof (uint8_t ),0 , +0 ,0 ,0 ,0 , +PKT_RX_L4_CKSUM_GOOD >>sizeof (uint8_t ),0 , +PKT_RX_L4_CKSUM_GOOD >>sizeof (uint8_t ),0 , +0 ,0 ,0 ,0 }; + ptype =vzipq_u8 (sterr_tmp1.val[0 ], sterr_tmp2.val[0 ]).val[0 ]; ptype =vandq_u8 (ptype, rsstype_msk); ptype =vqtbl1q_u8 (rss_flags, ptype);
@@ -150,11 +158,16 @@ desc_to_olflags_v(uint8x16x2_t sterr_tmp1, uint8x16x2_t sterr_tmp2, csum =vsetq_lane_u32 (vgetq_lane_u32 (vreinterpretq_u32_u8 (temp_csum),3 ), csum,0 ); vtag =vorrq_u8 (vreinterpretq_u8_u32 (csum), vtag); -/* convert VP, IPE, L4E to ol_flags */ - vtag =vqtbl1q_u8 (vlan_csum_map, vtag); - vtag =vorrq_u8 (ptype, vtag); +/* convert L4 checksum correct type to vtag_hi */ + vtag_hi =vqtbl1q_u8 (vlan_csum_map_hi, vtag); + vtag_hi =vshrq_n_u8 (vtag_hi,7 ); + +/* convert VP, IPE, L4E to vtag_lo */ + vtag_lo =vqtbl1q_u8 (vlan_csum_map_lo, vtag); + vtag_lo =vorrq_u8 (ptype, vtag_lo); - vol.word =vgetq_lane_u32 (vreinterpretq_u32_u8 (vtag),0 ); + vtag =vzipq_u8 (vtag_lo, vtag_hi).val[0 ]; + vol.word =vgetq_lane_u64 (vreinterpretq_u64_u8 (vtag),0 ); rx_pkts[0 ]->ol_flags = vol.e[0 ]; rx_pkts[1 ]->ol_flags = vol.e[1 ];
Signature · 1 line
2.17.1
Re: [dpdk-dev] [PATCH v1 3/4] net/ixgbe: implement good checksum flag for NEON vector
Quoted 28 lines
-----Original Message-----
From: Feifei Wang <[email protected]>
Sent: Wednesday, November 18, 2020 14:29
To: Jerin Jacob <[email protected]>; Ruifeng Wang <[email protected]>; Guo, Jia <[email protected]>; Wang, Haiyue <[email protected]>
Cc: [email protected]; [email protected]; feiwan02 <[email protected]>
Subject: [PATCH v1 3/4] net/ixgbe: implement good checksum flag for NEON vectorFrom: feiwan02 <[email protected]>
Add
CKSUM_GOODflag to distinguish a good checksum from an unknown one in neon vertor RX function.Test Results:
NICs: 82599(igb)
Dirver: ixgbe(vector)
Packet:IPv4_checksum= correct value &&UDP_checksum= correct value$:./app/dpdk-testpmd -c
0x3-w 0002:f9:00.0 -- -i --port-topology=chained test-pmd> set fwd rxonly
test-pmd> set verbose 1
test-pmd> startWith this patch:
testpmd> port 0/queue 0: received 1 packets
src=00:00:00:00:00:02 - dst=00:00:00:00:00:01 - type=0x0800 - length=70 - nb_segs=1ol_flags:PKT_RX_L4_CKSUM_GOODPKT_RX_IP_CKSUM_GOOD
Quoted 5 lines
Without this patch:
testpmd> port 0/queue 0: received 1 packets
src=00:00:00:00:00:02 - dst=00:00:00:00:00:01 - type=0x0800 - length=70 - nb_segs=1ol_flags:PKT_RX_L4_CKSUM_UNKNOWNPKT_RX_IP_CKSUM_UNKNOWN
How about to merge "1 & 2" and "3 & 4"? Then you will have the above test result. ;-)
Quoted 4 lines
Signed-off-by Feifei Wang <[email protected]>Reviewed-by Ruifeng Wang <[email protected]>---
2.17.1
[dpdk-dev] 回复: [PATCH v1 3/4] net/ixgbe: implement good checksum flag for NEON vector
Hi, Haiyue
Quoted 49 lines
-----邮件原件-----
发件人: Wang, Haiyue <[email protected]>
发送时间: 2020年11月18日 15:22
收件人: Feifei Wang <[email protected]>; [email protected]; Ruifeng Wang <[email protected]>; Guo, Jia <[email protected]> 抄送: [email protected]; nd <[email protected]>
主题: RE: [PATCH v1 3/4] net/ixgbe: implement good checksum flag for NEON vectorQuoted 10 lines
-----Original Message-----
From: Feifei Wang <[email protected]>
Sent: Wednesday, November 18, 2020 14:29
To: Jerin Jacob <[email protected]>; Ruifeng Wang <[email protected]>; Guo, Jia <[email protected]>; Wang, Haiyue <[email protected]>
Cc: [email protected]; [email protected]; feiwan02 <[email protected]>
Subject: [PATCH v1 3/4] net/ixgbe: implement good checksum flag for NEON vectorQuoted 3 lines
From: feiwan02 <[email protected]>
Add
CKSUM_GOODflag to distinguish a good checksum from an unknownone
Quoted 19 lines
in neon vertor RX function.
Test Results:
NICs: 82599(igb)
Dirver: ixgbe(vector)
Packet:IPv4_checksum= correct value &&UDP_checksum= correct value$:./app/dpdk-testpmd -c
0x3-w 0002:f9:00.0 -- -i
--port-topology=chained
test-pmd> set fwd rxonly
test-pmd> set verbose 1
test-pmd> startWith this patch:
testpmd> port 0/queue 0: received 1 packets src=00:00:00:00:00:02 - dst=00:00:00:00:00:01 - type=0x0800 - length=70 - nb_segs=1ol_flags:PKT_RX_L4_CKSUM_GOODPKT_RX_IP_CKSUM_GOODQuoted 6 lines
Without this patch:
testpmd> port 0/queue 0: received 1 packets src=00:00:00:00:00:02 - dst=00:00:00:00:00:01 - type=0x0800 - length=70 - nb_segs=1ol_flags:PKT_RX_L4_CKSUM_UNKNOWNPKT_RX_IP_CKSUM_UNKNOWN
Quoted 2 lines
How about to merge "1 & 2" and "3 & 4"? Then you will have the above test result. ;-)
Do you mean that combine patch 1 and patch 2 into one patch to support vlan stripping and bad checksum flag,
Then also do the same work for patch 3 and patch 4 to support good checksum flag and enable IXGBE neon vector when DEV_RX_OFFLOAD_CHECKSUM is set?
Actually, the test results are achieved without patch 4, due to that testpmd does not check rxmode->offloads, it will call IXGBE NEON vector function directly. And this change is for the default config of l3fwd example.
Best Regards
Feifei
Quoted 5 lines
Quoted 5 lines
Signed-off-by Feifei Wang <[email protected]>Reviewed-by Ruifeng Wang <[email protected]>---
2.17.1
Re: [dpdk-dev] [PATCH v1 3/4] net/ixgbe: implement good checksum flag for NEON vector
Quoted 61 lines
-----Original Message-----
From: Feifei Wang <[email protected]>
Sent: Wednesday, November 18, 2020 15:56
To: Wang, Haiyue <[email protected]>; [email protected]; Ruifeng Wang <[email protected]>; Guo, Jia <[email protected]>
Cc: [email protected]; nd <[email protected]>; nd <[email protected]>
Subject: 回复: [PATCH v1 3/4] net/ixgbe: implement good checksum flag for NEON vectorHi, Haiyue
Quoted 49 lines
-----邮件原件-----
发件人: Wang, Haiyue <[email protected]>
发送时间: 2020年11月18日 15:22
收件人: Feifei Wang <[email protected]>; [email protected]; Ruifeng Wang <[email protected]>; Guo, Jia <[email protected]> 抄送: [email protected]; nd <[email protected]>
主题: RE: [PATCH v1 3/4] net/ixgbe: implement good checksum flag for NEON vectorQuoted 10 lines
-----Original Message-----
From: Feifei Wang <[email protected]>
Sent: Wednesday, November 18, 2020 14:29
To: Jerin Jacob <[email protected]>; Ruifeng Wang <[email protected]>; Guo, Jia <[email protected]>; Wang, Haiyue <[email protected]>
Cc: [email protected]; [email protected]; feiwan02 <[email protected]>
Subject: [PATCH v1 3/4] net/ixgbe: implement good checksum flag for NEON vectorQuoted 3 lines
From: feiwan02 <[email protected]>
Add
CKSUM_GOODflag to distinguish a good checksum from an unknownone
Quoted 19 lines
in neon vertor RX function.
Test Results:
NICs: 82599(igb)
Dirver: ixgbe(vector)
Packet:IPv4_checksum= correct value &&UDP_checksum= correct value$:./app/dpdk-testpmd -c
0x3-w 0002:f9:00.0 -- -i
--port-topology=chained
test-pmd> set fwd rxonly
test-pmd> set verbose 1
test-pmd> startWith this patch:
testpmd> port 0/queue 0: received 1 packets src=00:00:00:00:00:02 - dst=00:00:00:00:00:01 - type=0x0800 - length=70 - nb_segs=1ol_flags:PKT_RX_L4_CKSUM_GOODPKT_RX_IP_CKSUM_GOODQuoted 6 lines
Without this patch:
testpmd> port 0/queue 0: received 1 packets src=00:00:00:00:00:02 - dst=00:00:00:00:00:01 - type=0x0800 - length=70 - nb_segs=1ol_flags:PKT_RX_L4_CKSUM_UNKNOWNPKT_RX_IP_CKSUM_UNKNOWNQuoted 2 lines
How about to merge "1 & 2" and "3 & 4"? Then you will have the above test result. ;-)
Quoted 9 lines
Do you mean that combine patch 1 and patch 2 into one patch to support vlan stripping and bad checksum flag,
Then also do the same work for patch 3 and patch 4 to support good checksum flag and enable IXGBE neon vector whenDEV_RX_OFFLOAD_CHECKSUMis set?Actually, the test results are achieved without patch 4, due to that testpmd does not check rxmode-
Quoted 1 line
offloads, it will call IXGBE NEON vector function directly. And this change
is for the default config of l3fwd example.
I was messed by the vector code, sorry. Patch b is for bad checksum, update the commit message to align your design. Then the patch set is OF for me, thanks!
Feifei Wang (4):
a). net/ixgbe: add VLAN stripping support for Arm
b). net/ixgbe: support checksum flags for NEON vector c). net/ixgbe: implement good checksum flag for NEON vector d). net/ixgbe: enable IXGBE NEON vector PMD when CHECKSUM is set
Quoted 7 lines
Best Regards
FeifeiQuoted 5 lines
Quoted 5 lines
Signed-off-by Feifei Wang <[email protected]>Reviewed-by Ruifeng Wang <[email protected]>---
2.17.1
[dpdk-dev] 回复: [PATCH v1 3/4] net/ixgbe: implement good checksum flag for NEON vector
Quoted 87 lines
-----邮件原件-----
发件人: Wang, Haiyue <[email protected]>
发送时间: 2020年11月18日 16:15
收件人: Feifei Wang <[email protected]>; [email protected]; Ruifeng Wang <[email protected]>; Guo, Jia <[email protected]> 抄送: [email protected]; nd <[email protected]>; nd <[email protected]>
主题: RE: [PATCH v1 3/4] net/ixgbe: implement good checksum flag for NEON vectorQuoted 9 lines
-----Original Message-----
From: Feifei Wang <[email protected]>
Sent: Wednesday, November 18, 2020 15:56
To: Wang, Haiyue <[email protected]>; [email protected]; Ruifeng Wang <[email protected]>; Guo, Jia <[email protected]>
Cc: [email protected]; nd <[email protected]>; nd <[email protected]>
Subject: 回复: [PATCH v1 3/4] net/ixgbe: implement good checksum flag for NEON vectorQuoted 6 lines
Hi, Haiyue
Quoted 4 lines
-----邮件原件-----
发件人: Wang, Haiyue <[email protected]>
发送时间: 2020年11月18日 15:22
收件人: Feifei Wang <[email protected]>; [email protected];Ruifeng
Quoted 53 lines
Quoted 46 lines
Wang <[email protected]>; Guo, Jia <[email protected]> 抄送: [email protected]; nd <[email protected]>
主题: RE: [PATCH v1 3/4] net/ixgbe: implement good checksum flag for NEON vectorQuoted 10 lines
-----Original Message-----
From: Feifei Wang <[email protected]>
Sent: Wednesday, November 18, 2020 14:29
To: Jerin Jacob <[email protected]>; Ruifeng Wang <[email protected]>; Guo, Jia <[email protected]>; Wang, Haiyue <[email protected]>
Cc: [email protected]; [email protected]; feiwan02 <[email protected]>
Subject: [PATCH v1 3/4] net/ixgbe: implement good checksum flag for NEON vectorQuoted 3 lines
From: feiwan02 <[email protected]>
Add
CKSUM_GOODflag to distinguish a good checksum from an unknownone
Quoted 20 lines
in neon vertor RX function.
Test Results:
NICs: 82599(igb)
Dirver: ixgbe(vector)
Packet:IPv4_checksum= correct value &&UDP_checksum= correct value$:./app/dpdk-testpmd -c
0x3-w 0002:f9:00.0 -- -i
--port-topology=chained
test-pmd> set fwd rxonly
test-pmd> set verbose 1
test-pmd> startWith this patch:
testpmd> port 0/queue 0: received 1 packets src=00:00:00:00:00:02 - dst=00:00:00:00:00:01 - type=0x0800 - length=70 - nb_segs=1ol_flags:PKT_RX_L4_CKSUM_GOODPKT_RX_IP_CKSUM_GOODQuoted 6 lines
Without this patch:
testpmd> port 0/queue 0: received 1 packets src=00:00:00:00:00:02 - dst=00:00:00:00:00:01 - type=0x0800 - length=70 - nb_segs=1ol_flags:PKT_RX_L4_CKSUM_UNKNOWNPKT_RX_IP_CKSUM_UNKNOWNQuoted 2 lines
How about to merge "1 & 2" and "3 & 4"? Then you will have the above test result. ;-)
Do you mean that combine patch 1 and patch 2 into one patch to support vlan stripping and bad checksum flag, Then also do the same work for patch 3 and patch 4 to support good checksum flag and enable IXGBE neon vector when
DEV_RX_OFFLOAD_CHECKSUMis set?Quoted 6 lines
Actually, the test results are achieved without patch 4, due to that testpmd does not check rxmode-
Quoted 2 lines
offloads, it will call IXGBE NEON vector function directly. And this change
is for the default config of l3fwd example.
Quoted 9 lines
I was messed by the vector code, sorry. Patch b is for bad checksum, update the commit message to align your design. Then the patch set is OF for me, thanks!
Feifei Wang (4):
a). net/ixgbe: add VLAN stripping support for Arm
b). net/ixgbe: support checksum flags for NEON vector c). net/ixgbe: implement good checksum flag for NEON vector d). net/ixgbe: enable IXGBE NEON vector PMD when CHECKSUM is set
That's all right. I will update the commit message and then upload the new version. Thanks for your attention.
Quoted 7 lines
Quoted 7 lines
Best Regards
FeifeiQuoted 5 lines
Quoted 5 lines
Signed-off-by Feifei Wang <[email protected]>Reviewed-by Ruifeng Wang <[email protected]>---
2.17.1
PATCH 4/4 net/ixgbe: enable IXGBE NEON vector PMD when CHECKSUM is set
In reply to Feifei WangFrom: feiwan02 <[email protected]>
IXGBE NEON vector PMD now supports checksum offloading, hence can be used when DEV_RX_OFFLOAD_CHECKSUM is set.
--- drivers/net/ixgbe/ixgbe_rxtx_vec_neon.c | 6 ------ 1 file changed, 6 deletions(-)
drivers/net/ixgbe/ixgbe_rxtx_vec_neon.c +0 -6
@@ -638,11 +638,5 @@ ixgbe_txq_vec_setup(struct ixgbe_tx_queue *txq) int __rte_coldixgbe_rx_vec_dev_conf_condition_check (struct rte_eth_dev *dev) { -struct rte_eth_rxmode *rxmode = &dev->data->dev_conf.rxmode; - -/* no csum error report support */ -if (rxmode->offloads &DEV_RX_OFFLOAD_CHECKSUM ) -return -1 ; -return ixgbe_rx_vec_dev_conf_condition_check_default (dev); }
Signature · 1 line
2.17.1
Zhang, Qi Z
AppliedQuoted 19 lines
-----Original Message-----
From: dev <[email protected]> On Behalf Of Feifei Wang
Sent: Wednesday, November 18, 2020 2:29 PM
Cc: [email protected]; [email protected]; Feifei Wang <[email protected]>
Subject: [dpdk-dev] [PATCH v1 0/4] Enable Checksum Offloading for NEON vectorThis patch series are mainly to enable checksum offloading for IXGBE NEON vector PMD, including good and bad checksum flags. In the meanwhile, the first patch enable VLAN stripping flag for Arm.
Feifei Wang (4):
net/ixgbe: add VLAN stripping support for Arm net/ixgbe: support checksum flags for NEON vector net/ixgbe: implement good checksum flag for NEON vector net/ixgbe: enable IXGBE NEON vector PMD when CHECKSUM is set
Quoted 5 lines
drivers/net/ixgbe/ixgbe_rxtx_vec_neon.c | 94 ++++++++++++++++++------- 1 file changed, 68 insertions(+), 26 deletions(-)--
2.17.1
Applied to dpdk-next-net-intel.
Thanks
Qi