Skip to contentSkip to conversation

bus: ti-sysc: suppress err msg for timers used as clockevent/source

PATCH In review Grygorii Strashko 2 participants 2 messages Nov 18, 2020 – Nov 19, 2020 OMAP2+ support

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 bus: ti-sysc: suppress err msg for timers used as clockevent/source

GP Timers used as clockevent/source are not available for ti-sysc bus and handled by Kernel timekeeping core. Now ti-sysc produces error message every time such timer is detected:

"ti-sysc: probe of 48040000.target-module failed with error -16"

Such messages are not necessary, so suppress them by returning -ENXIO instead of -EBUSY.

---
 drivers/bus/ti-sysc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/bus/ti-sysc.c +1 -1
index 792a2878cb16..02186bac1b0b 100644
@@ -2883,7 +2883,7 @@ static int sysc_check_active_timer(struct sysc *ddata)
 
 	if ((ddata->cfg.quirks & SYSC_QUIRK_NO_RESET_ON_INIT) &&
 	    (ddata->cfg.quirks & SYSC_QUIRK_NO_IDLE))
-		return -EBUSY;
+		return -ENXIO;
 
 	return 0;
 }
Signature · 1 line
2.17.1
maintainer
#1 lore raw
Quoted 8 lines · Grygorii Strashko

GP Timers used as clockevent/source are not available for ti-sysc bus and handled by Kernel timekeeping core. Now ti-sysc produces error message every time such timer is detected:

"ti-sysc: probe of 48040000.target-module failed with error -16"

Such messages are not necessary, so suppress them by returning -ENXIO instead of -EBUSY.

Thanks applying into fixes.

Tony