Skip to contentSkip to conversation

rtlwifi: rtl8192de: avoid accessing the data mapped to streaming DMA

PATCH RESEND In review Jia-Ju Bai 1 participant 1 message Nov 19, 2020

Subsystems (3)
lore
Share & tools
lore

Jia-Ju Bai

author
#0 lore raw

PATCH RESEND v2 3/4 rtlwifi: rtl8192de: avoid accessing the data mapped to streaming DMA

In rtl92de_tx_fill_cmddesc(), skb->data is mapped to streaming DMA on line 667:
dma_addr_t mapping = dma_map_single(..., skb->data, ...);

On line 669, skb->data is assigned to hdr after cast:
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)(skb->data);

Then hdr->frame_control is accessed on line 670:
__le16 fc = hdr->frame_control;

This DMA access may cause data inconsistency between CPU and hardwre.

To fix this bug, hdr->frame_control is accessed before the DMA mapping.

---
v2:
* Use "rtlwifi" as subject prefix and have all rtlwifi patches in the same pathset.
Thank Ping and Larry for good advice.

---
 drivers/net/wireless/realtek/rtlwifi/rtl8192de/trx.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
drivers/net/wireless/realtek/rtlwifi/rtl8192de/trx.c +4 -2
index 8944712274b5..c02813fba934 100644
@@ -664,12 +664,14 @@ void rtl92de_tx_fill_cmddesc(struct ieee80211_hw *hw,
 	struct rtl_ps_ctl *ppsc = rtl_psc(rtlpriv);
 	struct rtl_hal *rtlhal = rtl_hal(rtlpriv);
 	u8 fw_queue = QSLT_BEACON;
-	dma_addr_t mapping = dma_map_single(&rtlpci->pdev->dev, skb->data,
-					    skb->len, DMA_TO_DEVICE);
+
 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)(skb->data);
 	__le16 fc = hdr->frame_control;
 	__le32 *pdesc = (__le32 *)pdesc8;
 
+	dma_addr_t mapping = dma_map_single(&rtlpci->pdev->dev, skb->data,
+					    skb->len, DMA_TO_DEVICE);
+
 	if (dma_mapping_error(&rtlpci->pdev->dev, mapping)) {
 		rtl_dbg(rtlpriv, COMP_SEND, DBG_TRACE,
 			"DMA mapping error\n");
Signature · 1 line
2.17.1