5.9.10-rc1 review

@@ -50,16 +50,30 @@ int rfi_flush_test(void)
 	__u64 l1d_misses_total = 0;
 	unsigned long iterations = 100000, zero_size = 24 * 1024;
 	unsigned long l1d_misses_expected;
-	int rfi_flush_org, rfi_flush;
+	int rfi_flush_orig, rfi_flush;
+	int have_entry_flush, entry_flush_orig;
 
 	SKIP_IF(geteuid() != 0);
 
-	if (read_debugfs_file("powerpc/rfi_flush", &rfi_flush_org)) {
+	if (read_debugfs_file("powerpc/rfi_flush", &rfi_flush_orig) < 0) {
 		perror("Unable to read powerpc/rfi_flush debugfs file");
 		SKIP_IF(1);
 	}
 
-	rfi_flush = rfi_flush_org;
+	if (read_debugfs_file("powerpc/entry_flush", &entry_flush_orig) < 0) {
+		have_entry_flush = 0;
+	} else {
+		have_entry_flush = 1;
+
+		if (entry_flush_orig != 0) {
+			if (write_debugfs_file("powerpc/entry_flush", 0) < 0) {
+				perror("error writing to powerpc/entry_flush debugfs file");
+				return 1;
+			}
+		}
+	}
+
+	rfi_flush = rfi_flush_orig;
 
 	fd = perf_event_open_counter(PERF_TYPE_RAW, /* L1d miss */ 0x400f0, -1);
 	FAIL_IF(fd < 0);

@@ -68,6 +82,7 @@ int rfi_flush_test(void)
 
 	FAIL_IF(perf_event_enable(fd));
 
+	// disable L1 prefetching
 	set_dscr(1);
 
 	iter = repetitions;

@@ -109,8 +124,8 @@ again:
 		       repetitions * l1d_misses_expected / 2,
 		       passes, repetitions);
 
-	if (rfi_flush == rfi_flush_org) {
-		rfi_flush = !rfi_flush_org;
+	if (rfi_flush == rfi_flush_orig) {
+		rfi_flush = !rfi_flush_orig;
 		if (write_debugfs_file("powerpc/rfi_flush", rfi_flush) < 0) {
 			perror("error writing to powerpc/rfi_flush debugfs file");
 			return 1;

@@ -126,11 +141,19 @@ again:
 
 	set_dscr(0);
 
-	if (write_debugfs_file("powerpc/rfi_flush", rfi_flush_org) < 0) {
+	if (write_debugfs_file("powerpc/rfi_flush", rfi_flush_orig) < 0) {
 		perror("unable to restore original value of powerpc/rfi_flush debugfs file");
 		return 1;
 	}
 
+	if (have_entry_flush) {
+		if (write_debugfs_file("powerpc/entry_flush", entry_flush_orig) < 0) {
+			perror("unable to restore original value of powerpc/entry_flush "
+			       "debugfs file");
+			return 1;
+		}
+	}
+
 	return rc;
 }
 

@@ -57,11 +57,18 @@
 	nop;								\
 	nop
 
+#define ENTRY_FLUSH_SLOT						\
+	ENTRY_FLUSH_FIXUP_SECTION;					\
+	nop;								\
+	nop;								\
+	nop;
+
 /*
  * r10 must be free to use, r13 must be paca
  */
 #define INTERRUPT_TO_KERNEL						\
-	STF_ENTRY_BARRIER_SLOT
+	STF_ENTRY_BARRIER_SLOT;						\
+	ENTRY_FLUSH_SLOT
 
 /*
  * Macros for annotating the expected destination of (h)rfid

@@ -205,6 +205,14 @@ label##3:					       	\
 	FTR_ENTRY_OFFSET 955b-956b;			\
 	.popsection;
 
+#define ENTRY_FLUSH_FIXUP_SECTION			\
+957:							\
+	.pushsection __entry_flush_fixup,"a";		\
+	.align 2;					\
+958:							\
+	FTR_ENTRY_OFFSET 957b-958b;			\
+	.popsection;
+
 #define RFI_FLUSH_FIXUP_SECTION				\
 951:							\
 	.pushsection __rfi_flush_fixup,"a";		\

@@ -237,8 +245,10 @@ label##3:					       	\
 #include <linux/types.h>
 
 extern long stf_barrier_fallback;
+extern long entry_flush_fallback;
 extern long __start___stf_entry_barrier_fixup, __stop___stf_entry_barrier_fixup;
 extern long __start___stf_exit_barrier_fixup, __stop___stf_exit_barrier_fixup;
+extern long __start___entry_flush_fixup, __stop___entry_flush_fixup;
 extern long __start___rfi_flush_fixup, __stop___rfi_flush_fixup;
 extern long __start___barrier_nospec_fixup, __stop___barrier_nospec_fixup;
 extern long __start__btb_flush_fixup, __stop__btb_flush_fixup;

@@ -86,12 +86,16 @@ static inline bool security_ftr_enabled(
 // Software required to flush link stack on context switch
 #define SEC_FTR_FLUSH_LINK_STACK	0x0000000000001000ull
 
+// The L1-D cache should be flushed when entering the kernel
+#define SEC_FTR_L1D_FLUSH_ENTRY		0x0000000000004000ull
+
 
 // Features enabled by default
 #define SEC_FTR_DEFAULT \
 	(SEC_FTR_L1D_FLUSH_HV | \
 	 SEC_FTR_L1D_FLUSH_PR | \
 	 SEC_FTR_BNDS_CHK_SPEC_BAR | \
+	 SEC_FTR_L1D_FLUSH_ENTRY | \
 	 SEC_FTR_FAVOUR_SECURITY)
 
 #endif /* _ASM_POWERPC_SECURITY_FEATURES_H */

@@ -52,12 +52,15 @@ enum l1d_flush_type {
 };
 
 void setup_rfi_flush(enum l1d_flush_type, bool enable);
+void setup_entry_flush(bool enable);
+void setup_uaccess_flush(bool enable);
 void do_rfi_flush_fixups(enum l1d_flush_type types);
 #ifdef CONFIG_PPC_BARRIER_NOSPEC
 void setup_barrier_nospec(void);
 #else
 static inline void setup_barrier_nospec(void) { };
 #endif
+void do_entry_flush_fixups(enum l1d_flush_type types);
 void do_barrier_nospec_fixups(bool enable);
 extern bool barrier_nospec_enabled;
 

97 lines not on this page · raw message

60 lines not on this page · raw message

@@ -122,12 +122,23 @@ static void pnv_setup_rfi_flush(void)
 			type = L1D_FLUSH_ORI;
 	}
 
+	/*
+	 * If we are non-Power9 bare metal, we don't need to flush on kernel
+	 * entry: it fixes a P9 specific vulnerability.
+	 */
+	if (!pvr_version_is(PVR_POWER9))
+		security_ftr_clear(SEC_FTR_L1D_FLUSH_ENTRY);
+
 	enable = security_ftr_enabled(SEC_FTR_FAVOUR_SECURITY) && \
 		 (security_ftr_enabled(SEC_FTR_L1D_FLUSH_PR)   || \
 		  security_ftr_enabled(SEC_FTR_L1D_FLUSH_HV));
 
 	setup_rfi_flush(type, enable);
 	setup_count_cache_flush();
+
+	enable = security_ftr_enabled(SEC_FTR_FAVOUR_SECURITY) &&
+		 security_ftr_enabled(SEC_FTR_L1D_FLUSH_ENTRY);
+	setup_entry_flush(enable);
 }
 
 static void __init pnv_setup_arch(void)

@@ -573,6 +573,10 @@ void pseries_setup_rfi_flush(void)
 
 	setup_rfi_flush(types, enable);
 	setup_count_cache_flush();
+
+	enable = security_ftr_enabled(SEC_FTR_FAVOUR_SECURITY) &&
+		 security_ftr_enabled(SEC_FTR_L1D_FLUSH_ENTRY);
+	setup_entry_flush(enable);
 }
 
 #ifdef CONFIG_PCI_IOV

104 lines not on this page · raw message

@@ -144,6 +144,9 @@
 	RFSCV;								\
 	b	rfscv_flush_fallback
 
+#else /* __ASSEMBLY__ */
+/* Prototype for function defined in exceptions-64s.S */
+void do_uaccess_flush(void);
 #endif /* __ASSEMBLY__ */
 
 #endif	/* _ASM_POWERPC_EXCEPTION_H */

@@ -205,6 +205,14 @@ label##3:					       	\
 	FTR_ENTRY_OFFSET 955b-956b;			\
 	.popsection;
 
+#define UACCESS_FLUSH_FIXUP_SECTION			\
+959:							\
+	.pushsection __uaccess_flush_fixup,"a";		\
+	.align 2;					\
+960:							\
+	FTR_ENTRY_OFFSET 959b-960b;			\
+	.popsection;
+
 #define ENTRY_FLUSH_FIXUP_SECTION			\
 957:							\
 	.pushsection __entry_flush_fixup,"a";		\

@@ -248,6 +256,7 @@ extern long stf_barrier_fallback;
 extern long entry_flush_fallback;
 extern long __start___stf_entry_barrier_fixup, __stop___stf_entry_barrier_fixup;
 extern long __start___stf_exit_barrier_fixup, __stop___stf_exit_barrier_fixup;
+extern long __start___uaccess_flush_fixup, __stop___uaccess_flush_fixup;
 extern long __start___entry_flush_fixup, __stop___entry_flush_fixup;
 extern long __start___rfi_flush_fixup, __stop___rfi_flush_fixup;
 extern long __start___barrier_nospec_fixup, __stop___barrier_nospec_fixup;

@@ -53,17 +53,26 @@ static inline void setup_kuep(bool disab
 void setup_kuap(bool disabled);
 #else
 static inline void setup_kuap(bool disabled) { }
+
+static inline bool
+bad_kuap_fault(struct pt_regs *regs, unsigned long address, bool is_write)
+{
+	return false;
+}
+
+/*
+ * book3s/64/kup-radix.h defines these functions for the !KUAP case to flush
+ * the L1D cache after user accesses. Only include the empty stubs for other
+ * platforms.
+ */
+#ifndef CONFIG_PPC64
 static inline void allow_user_access(void __user *to, const void __user *from,
 				     unsigned long size, unsigned long dir) { }
 static inline void prevent_user_access(void __user *to, const void __user *from,
 				       unsigned long size, unsigned long dir) { }
 static inline unsigned long prevent_user_access_return(void) { return 0UL; }
 static inline void restore_user_access(unsigned long flags) { }
-static inline bool
-bad_kuap_fault(struct pt_regs *regs, unsigned long address, bool is_write)
-{
-	return false;
-}
+#endif /* CONFIG_PPC64 */
 #endif /* CONFIG_PPC_KUAP */
 
 static inline void allow_read_from_user(const void __user *from, unsigned long size)

@@ -89,6 +89,8 @@ static inline bool security_ftr_enabled(
 // The L1-D cache should be flushed when entering the kernel
 #define SEC_FTR_L1D_FLUSH_ENTRY		0x0000000000004000ull
 
+// The L1-D cache should be flushed after user accesses from the kernel
+#define SEC_FTR_L1D_FLUSH_UACCESS	0x0000000000008000ull
 
 // Features enabled by default
 #define SEC_FTR_DEFAULT \

@@ -96,6 +98,7 @@ static inline bool security_ftr_enabled(
 	 SEC_FTR_L1D_FLUSH_PR | \
 	 SEC_FTR_BNDS_CHK_SPEC_BAR | \
 	 SEC_FTR_L1D_FLUSH_ENTRY | \
+	 SEC_FTR_L1D_FLUSH_UACCESS | \
 	 SEC_FTR_FAVOUR_SECURITY)
 
 #endif /* _ASM_POWERPC_SECURITY_FEATURES_H */

@@ -60,6 +60,7 @@ void setup_barrier_nospec(void);
 #else
 static inline void setup_barrier_nospec(void) { };
 #endif
+void do_uaccess_flush_fixups(enum l1d_flush_type types);
 void do_entry_flush_fixups(enum l1d_flush_type types);
 void do_barrier_nospec_fixups(bool enable);
 extern bool barrier_nospec_enabled;

98 lines not on this page · raw message

56 lines not on this page · raw message

@@ -124,10 +124,12 @@ static void pnv_setup_rfi_flush(void)
 
 	/*
 	 * If we are non-Power9 bare metal, we don't need to flush on kernel
-	 * entry: it fixes a P9 specific vulnerability.
+	 * entry or after user access: they fix a P9 specific vulnerability.
 	 */
-	if (!pvr_version_is(PVR_POWER9))
+	if (!pvr_version_is(PVR_POWER9)) {
 		security_ftr_clear(SEC_FTR_L1D_FLUSH_ENTRY);
+		security_ftr_clear(SEC_FTR_L1D_FLUSH_UACCESS);
+	}
 
 	enable = security_ftr_enabled(SEC_FTR_FAVOUR_SECURITY) && \
 		 (security_ftr_enabled(SEC_FTR_L1D_FLUSH_PR)   || \

@@ -139,6 +141,10 @@ static void pnv_setup_rfi_flush(void)
 	enable = security_ftr_enabled(SEC_FTR_FAVOUR_SECURITY) &&
 		 security_ftr_enabled(SEC_FTR_L1D_FLUSH_ENTRY);
 	setup_entry_flush(enable);
+
+	enable = security_ftr_enabled(SEC_FTR_FAVOUR_SECURITY) &&
+		 security_ftr_enabled(SEC_FTR_L1D_FLUSH_UACCESS);
+	setup_uaccess_flush(enable);
 }
 
 static void __init pnv_setup_arch(void)

@@ -577,6 +577,10 @@ void pseries_setup_rfi_flush(void)
 	enable = security_ftr_enabled(SEC_FTR_FAVOUR_SECURITY) &&
 		 security_ftr_enabled(SEC_FTR_L1D_FLUSH_ENTRY);
 	setup_entry_flush(enable);
+
+	enable = security_ftr_enabled(SEC_FTR_FAVOUR_SECURITY) &&
+		 security_ftr_enabled(SEC_FTR_L1D_FLUSH_UACCESS);
+	setup_uaccess_flush(enable);
 }
 
 #ifdef CONFIG_PCI_IOV

@@ -27,6 +27,7 @@
 #endif
 .endm
 
+#ifdef CONFIG_PPC_KUAP
 .macro kuap_check_amr gpr1, gpr2
 #ifdef CONFIG_PPC_KUAP_DEBUG
 	BEGIN_MMU_FTR_SECTION_NESTED(67)

@@ -38,6 +39,7 @@
 	END_MMU_FTR_SECTION_NESTED_IFSET(MMU_FTR_RADIX_KUAP, 67)
 #endif
 .endm
+#endif
 
 .macro kuap_save_amr_and_lock gpr1, gpr2, use_cr, msr_pr_cr
 #ifdef CONFIG_PPC_KUAP

@@ -148,8 +150,6 @@ static inline unsigned long kuap_get_and
 	return 0UL;
 }
 
-static inline void kuap_check_amr(void) { }
-
 static inline unsigned long get_kuap(void)
 {
 	return AMR_KUAP_BLOCKED;

@@ -14,7 +14,7 @@
 #define KUAP_CURRENT_WRITE	8
 #define KUAP_CURRENT		(KUAP_CURRENT_READ | KUAP_CURRENT_WRITE)
 
-#ifdef CONFIG_PPC64
+#ifdef CONFIG_PPC_BOOK3S_64
 #include <asm/book3s/64/kup-radix.h>
 #endif
 #ifdef CONFIG_PPC_8xx

@@ -35,6 +35,9 @@
 .macro kuap_check	current, gpr
 .endm
 
+.macro kuap_check_amr	gpr1, gpr2
+.endm
+
 #endif
 
 #else /* !__ASSEMBLY__ */

@@ -60,19 +63,21 @@ bad_kuap_fault(struct pt_regs *regs, uns
 	return false;
 }
 
+static inline void kuap_check_amr(void) { }
+
 /*
  * book3s/64/kup-radix.h defines these functions for the !KUAP case to flush
  * the L1D cache after user accesses. Only include the empty stubs for other
  * platforms.
  */
-#ifndef CONFIG_PPC64
+#ifndef CONFIG_PPC_BOOK3S_64
 static inline void allow_user_access(void __user *to, const void __user *from,
 				     unsigned long size, unsigned long dir) { }
 static inline void prevent_user_access(void __user *to, const void __user *from,
 				       unsigned long size, unsigned long dir) { }
 static inline unsigned long prevent_user_access_return(void) { return 0UL; }
 static inline void restore_user_access(unsigned long flags) { }
-#endif /* CONFIG_PPC64 */
+#endif /* CONFIG_PPC_BOOK3S_64 */
 #endif /* CONFIG_PPC_KUAP */
 
 static inline void allow_read_from_user(const void __user *from, unsigned long size)

@@ -2,7 +2,7 @@
 
 #include <linux/err.h>
 #include <asm/asm-prototypes.h>
-#include <asm/book3s/64/kup-radix.h>
+#include <asm/kup.h>
 #include <asm/cputime.h>
 #include <asm/hw_irq.h>
 #include <asm/kprobes.h>

198 lines not on this page · raw message

@@ -78,6 +78,7 @@ struct lm3697 {
 	struct mutex lock;
 
 	int bank_cfg;
+	int num_banks;
 
 	struct lm3697_led leds[];
 };

@@ -180,7 +181,7 @@ static int lm3697_init(struct lm3697 *pr
 	if (ret)
 		dev_err(&priv->client->dev, "Cannot write OUTPUT config\n");
 
-	for (i = 0; i < LM3697_MAX_CONTROL_BANKS; i++) {
+	for (i = 0; i < priv->num_banks; i++) {
 		led = &priv->leds[i];
 		ret = ti_lmu_common_set_ramp(&led->lmu_data);
 		if (ret)

@@ -307,8 +308,8 @@ static int lm3697_probe(struct i2c_clien
 	int ret;
 
 	count = device_get_child_node_count(&client->dev);
-	if (!count) {
-		dev_err(&client->dev, "LEDs are not defined in device tree!");
+	if (!count || count > LM3697_MAX_CONTROL_BANKS) {
+		dev_err(&client->dev, "Strange device tree!");
 		return -ENODEV;
 	}
 

@@ -322,6 +323,7 @@ static int lm3697_probe(struct i2c_clien
 
 	led->client = client;
 	led->dev = &client->dev;
+	led->num_banks = count;
 	led->regmap = devm_regmap_init_i2c(client, &lm3697_regmap_config);
 	if (IS_ERR(led->regmap)) {
 		ret = PTR_ERR(led->regmap);

@@ -99,7 +99,8 @@ static irqreturn_t sunkbd_interrupt(stru
 	switch (data) {
 
 	case SUNKBD_RET_RESET:
-		schedule_work(&sunkbd->tq);
+		if (sunkbd->enabled)
+			schedule_work(&sunkbd->tq);
 		sunkbd->reset = -1;
 		break;
 

@@ -200,16 +201,12 @@ static int sunkbd_initialize(struct sunk
 }
 
 /*
- * sunkbd_reinit() sets leds and beeps to a state the computer remembers they
- * were in.
+ * sunkbd_set_leds_beeps() sets leds and beeps to a state the computer remembers
+ * they were in.
  */
 
-static void sunkbd_reinit(struct work_struct *work)
+static void sunkbd_set_leds_beeps(struct sunkbd *sunkbd)
 {
-	struct sunkbd *sunkbd = container_of(work, struct sunkbd, tq);
-
-	wait_event_interruptible_timeout(sunkbd->wait, sunkbd->reset >= 0, HZ);
-
 	serio_write(sunkbd->serio, SUNKBD_CMD_SETLED);
 	serio_write(sunkbd->serio,
 		(!!test_bit(LED_CAPSL,   sunkbd->dev->led) << 3) |

@@ -222,11 +219,39 @@ static void sunkbd_reinit(struct work_st
 		SUNKBD_CMD_BELLOFF - !!test_bit(SND_BELL, sunkbd->dev->snd));
 }
 
+
+/*
+ * sunkbd_reinit() wait for the keyboard reset to complete and restores state
+ * of leds and beeps.
+ */
+
+static void sunkbd_reinit(struct work_struct *work)
+{
+	struct sunkbd *sunkbd = container_of(work, struct sunkbd, tq);
+
+	/*
+	 * It is OK that we check sunkbd->enabled without pausing serio,
+	 * as we only want to catch true->false transition that will
+	 * happen once and we will be woken up for it.
+	 */
+	wait_event_interruptible_timeout(sunkbd->wait,
+					 sunkbd->reset >= 0 || !sunkbd->enabled,
+					 HZ);
+
+	if (sunkbd->reset >= 0 && sunkbd->enabled)
+		sunkbd_set_leds_beeps(sunkbd);
+}
+
 static void sunkbd_enable(struct sunkbd *sunkbd, bool enable)
 {
 	serio_pause_rx(sunkbd->serio);
 	sunkbd->enabled = enable;
 	serio_continue_rx(sunkbd->serio);
+
+	if (!enable) {
+		wake_up_interruptible(&sunkbd->wait);
+		cancel_work_sync(&sunkbd->tq);
+	}
 }
 
 /*

@@ -258,6 +258,24 @@ struct sta_info *sta_info_get_by_idx(str
  */
 void sta_info_free(struct ieee80211_local *local, struct sta_info *sta)
 {
+	/*
+	 * If we had used sta_info_pre_move_state() then we might not
+	 * have gone through the state transitions down again, so do
+	 * it here now (and warn if it's inserted).
+	 *
+	 * This will clear state such as fast TX/RX that may have been
+	 * allocated during state transitions.
+	 */
+	while (sta->sta_state > IEEE80211_STA_NONE) {
+		int ret;
+
+		WARN_ON_ONCE(test_sta_flag(sta, WLAN_STA_INSERTED));
+
+		ret = sta_info_move_state(sta, sta->sta_state - 1);
+		if (WARN_ONCE(ret, "sta_info_move_state() returned %d\n", ret))
+			break;
+	}
+
 	if (sta->rate_ctrl)
 		rate_control_free_sta(sta);
 

@@ -471,6 +471,9 @@ void can_init_proc(struct net *net)
  */
 void can_remove_proc(struct net *net)
 {
+	if (!net->can.proc_dir)
+		return;
+
 	if (net->can.pde_version)
 		remove_proc_entry(CAN_PROC_VERSION, net->can.proc_dir);
 

@@ -498,6 +501,5 @@ void can_remove_proc(struct net *net)
 	if (net->can.pde_rcvlist_sff)
 		remove_proc_entry(CAN_PROC_RCVLIST_SFF, net->can.proc_dir);
 
-	if (net->can.proc_dir)
-		remove_proc_entry("can", net->proc_net);
+	remove_proc_entry("can", net->proc_net);
 }

@@ -126,7 +126,7 @@
 	snprintf(_metadata->results->reason, \
 		 sizeof(_metadata->results->reason), fmt, ##__VA_ARGS__); \
 	if (TH_LOG_ENABLED) { \
-		fprintf(TH_LOG_STREAM, "#      SKIP     %s\n", \
+		fprintf(TH_LOG_STREAM, "#      SKIP      %s\n", \
 			_metadata->results->reason); \
 	} \
 	_metadata->passed = 1; \

@@ -1251,7 +1251,7 @@ static bool shared_caches;
 /* Activate a secondary processor. */
 void start_secondary(void *unused)
 {
-	unsigned int cpu = smp_processor_id();
+	unsigned int cpu = raw_smp_processor_id();
 	struct cpumask *(*sibling_mask)(int) = cpu_sibling_mask;
 
 	mmgrab(&init_mm);

@@ -459,7 +459,7 @@ enum perf_snb_uncore_imc_freerunning_typ
 static struct freerunning_counters snb_uncore_imc_freerunning[] = {
 	[SNB_PCI_UNCORE_IMC_DATA_READS]		= { SNB_UNCORE_PCI_IMC_DATA_READS_BASE,
 							0x0, 0x0, 1, 32 },
-	[SNB_PCI_UNCORE_IMC_DATA_READS]		= { SNB_UNCORE_PCI_IMC_DATA_WRITES_BASE,
+	[SNB_PCI_UNCORE_IMC_DATA_WRITES]	= { SNB_UNCORE_PCI_IMC_DATA_WRITES_BASE,
 							0x0, 0x0, 1, 32 },
 	[SNB_PCI_UNCORE_IMC_GT_REQUESTS]	= { SNB_UNCORE_PCI_IMC_GT_REQUESTS_BASE,
 							0x0, 0x0, 1, 32 },

@@ -4032,6 +4032,12 @@ static int em_clflush(struct x86_emulate
 	return X86EMUL_CONTINUE;
 }
 
+static int em_clflushopt(struct x86_emulate_ctxt *ctxt)
+{
+	/* emulating clflushopt regardless of cpuid */
+	return X86EMUL_CONTINUE;
+}
+
 static int em_movsxd(struct x86_emulate_ctxt *ctxt)
 {
 	ctxt->dst.val = (s32) ctxt->src.val;

@@ -4571,7 +4577,7 @@ static const struct opcode group11[] = {
 };
 
 static const struct gprefix pfx_0f_ae_7 = {
-	I(SrcMem | ByteOp, em_clflush), N, N, N,
+	I(SrcMem | ByteOp, em_clflush), I(SrcMem | ByteOp, em_clflushopt), N, N,
 };
 
 static const struct group_dual group15 = { {

@@ -101,7 +101,7 @@ static acpi_status acpi_ged_request_inte
 
 	switch (gsi) {
 	case 0 ... 255:
-		sprintf(ev_name, "_%c%02hhX",
+		sprintf(ev_name, "_%c%02X",
 			trigger == ACPI_EDGE_SENSITIVE ? 'E' : 'L', gsi);
 
 		if (ACPI_SUCCESS(acpi_get_handle(handle, ev_name, &evt_handle)))