Skip to contentSkip to conversation

Extend irqchip ocelot driver to support other SoCs

PATCH Superseded Gregory CLEMENT 3 participants 10 messages Nov 20, 2020 – Nov 23, 2020

Subsystems (2)

v4 of 5 Superseded Latest is v5 →

lore
Share & tools
lore
#0 lore raw

v4 cover Extend irqchip ocelot driver to support other SoCs

Hello,

Ocelot SoC belongs to a larger family of SoCs which use the same interrupt controller with a few variation.

This series of patches add support for Luton, Serval and Jaguar2, they are all MIPS based.

The first patches of the series also updates the binding documentation with the new compatible strings.

Gregory

Changelog:
v3 -> v4
- Fix example in binding adding #address-cells property.

- Split the intial "irqchip: ocelot: Add support for Luton platforms" patch with a new patch "irqchip: ocelot: prepare to support more SoC"

- Move from u32 to u8 the type used inside the "struct chip_props"

- Keep the function ocelot_irq_unmask as is and use generic function irq_gc_mask_disable_reg and irq_gc_unmask_enable_reg for Luton.

- Removed the irq_set_irqchip_state callback, actually this function was never called on this platform and seemed in the end useless.

- Add acked-by from Alexandre on the last 2 patches.

v2 -> v3
- Fix new-line-at-end-of-file error in the yaml file

v1 -> v2:
- Convert the binding to yaml
- Squashed the patches adding new binding in a single one

Gregory CLEMENT (6):
dt-bindings: interrupt-controller: convert icpu intr bindings to
json-schema
dt-bindings: interrupt-controller: Add binding for few Microsemi
interrupt controllers
irqchip: ocelot: prepare to support more SoC
irqchip: ocelot: Add support for Luton platforms
irqchip: ocelot: Add support for Serval platforms
irqchip: ocelot: Add support for Jaguar2 platforms

 .../mscc,ocelot-icpu-intr.txt                 |  21 ---
 .../mscc,ocelot-icpu-intr.yaml                |  64 ++++++++
 drivers/irqchip/irq-mscc-ocelot.c             | 146 +++++++++++++++---
 3 files changed, 187 insertions(+), 44 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/interrupt-controller/mscc,ocelot-icpu-intr.txt
 create mode 100644 Documentation/devicetree/bindings/interrupt-controller/mscc,ocelot-icpu-intr.yaml
Signature · 1 line
2.29.2
#1 lore raw

PATCH v4 1/6 dt-bindings: interrupt-controller: convert icpu intr bindings to json-schema

Convert device tree bindings for Microsemi Ocelot SoC ICPU Interrupt Controller to YAML format

---
 .../mscc,ocelot-icpu-intr.txt                 | 21 -------
 .../mscc,ocelot-icpu-intr.yaml                | 60 +++++++++++++++++++
 2 files changed, 60 insertions(+), 21 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/interrupt-controller/mscc,ocelot-icpu-intr.txt
 create mode 100644 Documentation/devicetree/bindings/interrupt-controller/mscc,ocelot-icpu-intr.yaml
Documentation/devicetree/bindings/interrupt-controller/mscc,ocelot-icpu-intr.txt deleted +0 -21
deleted file mode 100644
index f5baeccb689f..000000000000
@@ -1,21 +0,0 @@
-Microsemi Ocelot SoC ICPU Interrupt Controller
-
-Required properties:
-
-- compatible : should be "mscc,ocelot-icpu-intr"
-- reg : Specifies base physical address and size of the registers.
-- interrupt-controller : Identifies the node as an interrupt controller
-- #interrupt-cells : Specifies the number of cells needed to encode an
-  interrupt source. The value shall be 1.
-- interrupts : Specifies the CPU interrupt the controller is connected to.
-
-Example:
-
-		intc: interrupt-controller@70000070 {
-			compatible = "mscc,ocelot-icpu-intr";
-			reg = <0x70000070 0x70>;
-			#interrupt-cells = <1>;
-			interrupt-controller;
-			interrupt-parent = <&cpuintc>;
-			interrupts = <2>;
-		};
Documentation/devicetree/bindings/interrupt-controller/mscc,ocelot-icpu-intr.yaml new file +60 -0

60 lines not on this page · raw message

Signature · 1 line
2.29.2
maintainer
#2 lore raw

Re: [PATCH v4 1/6] dt-bindings: interrupt-controller: convert icpu intr bindings to json-schema

Quoted 11 lines · Gregory CLEMENT

Convert device tree bindings for Microsemi Ocelot SoC ICPU Interrupt Controller to YAML format

---
 .../mscc,ocelot-icpu-intr.txt                 | 21 -------
 .../mscc,ocelot-icpu-intr.yaml                | 60 +++++++++++++++++++
 2 files changed, 60 insertions(+), 21 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/interrupt-controller/mscc,ocelot-icpu-intr.txt
 create mode 100644 Documentation/devicetree/bindings/interrupt-controller/mscc,ocelot-icpu-intr.yaml

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:
./Documentation/devicetree/bindings/interrupt-controller/mscc,ocelot-icpu-intr.yaml:55:1: [error] syntax error: found character '\t' that cannot start any token (syntax)

dtschema/dtc warnings/errors:
Traceback (most recent call last):
File "/usr/local/bin/dt-extract-example", line 45, in <module>
binding = yaml.load(open(args.yamlfile, encoding='utf-8').read())
File "/usr/local/lib/python3.8/dist-packages/ruamel/yaml/main.py", line 343, in load
return constructor.get_single_data()
File "/usr/local/lib/python3.8/dist-packages/ruamel/yaml/constructor.py", line 111, in get_single_data
node = self.composer.get_single_node()
File "_ruamel_yaml.pyx", line 706, in _ruamel_yaml.CParser.get_single_node
File "_ruamel_yaml.pyx", line 724, in _ruamel_yaml.CParser._compose_document
File "_ruamel_yaml.pyx", line 775, in _ruamel_yaml.CParser._compose_node
File "_ruamel_yaml.pyx", line 889, in _ruamel_yaml.CParser._compose_mapping_node
File "_ruamel_yaml.pyx", line 773, in _ruamel_yaml.CParser._compose_node
File "_ruamel_yaml.pyx", line 848, in _ruamel_yaml.CParser._compose_sequence_node
File "_ruamel_yaml.pyx", line 904, in _ruamel_yaml.CParser._parse_next_event
ruamel.yaml.scanner.ScannerError: while scanning a block scalar
in "<unicode string>", line 50, column 5
found a tab character where an indentation space is expected
in "<unicode string>", line 55, column 1
make[1]: *** [Documentation/devicetree/bindings/Makefile:20: Documentation/devicetree/bindings/interrupt-controller/mscc,ocelot-icpu-intr.example.dts] Error 1 make[1]: *** Deleting file 'Documentation/devicetree/bindings/interrupt-controller/mscc,ocelot-icpu-intr.example.dts'
make[1]: *** Waiting for unfinished jobs....
make[1]: *** [Documentation/devicetree/bindings/Makefile:59: Documentation/devicetree/bindings/processed-schema-examples.json] Error 123
make: *** [Makefile:1364: dt_binding_check] Error 2

See https://patchwork.ozlabs.org/patch/1403891

The base for the patch is generally the last rc1. Any dependencies should be noted.

If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date:

pip3 install dtschema --upgrade

Please check and re-submit.

#3 lore raw

PATCH v4 2/6 dt-bindings: interrupt-controller: Add binding for few Microsemi interrupt controllers

In reply to Gregory CLEMENT

Add the Device Tree binding documentation for the Microsemi Jaguar2, Luton and Serval interrupt controller that is part of the ICPU. It is connected directly to the MIPS core interrupt controller.

---
 .../bindings/interrupt-controller/mscc,ocelot-icpu-intr.yaml  | 4 ++++
 1 file changed, 4 insertions(+)
Documentation/devicetree/bindings/interrupt-controller/mscc,ocelot-icpu-intr.yaml +4 -0
index f34b319c7874..92fb1baf600f 100644
@@ -21,7 +21,11 @@ properties:
   compatible:
     items:
       - enum:
+          - mscc,jaguar2-icpu-intr
+          - mscc,luton-icpu-intr
           - mscc,ocelot-icpu-intr
+          - mscc,serval-icpu-intr
+
 
   '#interrupt-cells':
     const: 1
Signature · 1 line
2.29.2
#4 lore raw

PATCH v4 3/6 irqchip: ocelot: prepare to support more SoC

In reply to Gregory CLEMENT

This patch extends irqchip driver for oceleot to be used with other vcoreiii base platforms.

---
 drivers/irqchip/irq-mscc-ocelot.c | 76 ++++++++++++++++++++++---------
 1 file changed, 54 insertions(+), 22 deletions(-)
drivers/irqchip/irq-mscc-ocelot.c +54 -22
index 88143c0b700c..6d4029a2ded0 100644
@@ -12,30 +12,51 @@
 #include <linux/irqchip/chained_irq.h>
 #include <linux/interrupt.h>
 
-#define ICPU_CFG_INTR_INTR_STICKY	0x10
-#define ICPU_CFG_INTR_INTR_ENA		0x18
-#define ICPU_CFG_INTR_INTR_ENA_CLR	0x1c
-#define ICPU_CFG_INTR_INTR_ENA_SET	0x20
-#define ICPU_CFG_INTR_DST_INTR_IDENT(x)	(0x38 + 0x4 * (x))
-#define ICPU_CFG_INTR_INTR_TRIGGER(x)	(0x5c + 0x4 * (x))
-
-#define OCELOT_NR_IRQ 24
+#define ICPU_CFG_INTR_DST_INTR_IDENT(_p, x) ((_p)->reg_off_ident + 0x4 * (x))
+#define ICPU_CFG_INTR_INTR_TRIGGER(_p, x)   ((_p)->reg_off_trigger + 0x4 * (x))
+
+#define FLAGS_HAS_TRIGGER	BIT(0)
+
+struct chip_props {
+	u8 flags;
+	u8 reg_off_sticky;
+	u8 reg_off_ena;
+	u8 reg_off_ena_clr;
+	u8 reg_off_ena_set;
+	u8 reg_off_ident;
+	u8 reg_off_trigger;
+	u8 reg_off_ena_irq0;
+	u8 n_irq;
+};
+
+static struct chip_props ocelot_props = {
+	.flags			= FLAGS_HAS_TRIGGER,
+	.reg_off_sticky		= 0x10,
+	.reg_off_ena		= 0x18,
+	.reg_off_ena_clr	= 0x1c,
+	.reg_off_ena_set	= 0x20,
+	.reg_off_ident		= 0x38,
+	.reg_off_trigger	= 0x5c,
+	.n_irq			= 24,
+};
 
 static void ocelot_irq_unmask(struct irq_data *data)
 {
 	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(data);
+	struct irq_domain *d = data->domain;
+	struct chip_props *p = d->host_data;
 	struct irq_chip_type *ct = irq_data_get_chip_type(data);
 	unsigned int mask = data->mask;
 	u32 val;
 
 	irq_gc_lock(gc);
-	val = irq_reg_readl(gc, ICPU_CFG_INTR_INTR_TRIGGER(0)) |
-	      irq_reg_readl(gc, ICPU_CFG_INTR_INTR_TRIGGER(1));
+	val = irq_reg_readl(gc, ICPU_CFG_INTR_INTR_TRIGGER(p, 0)) |
+		irq_reg_readl(gc, ICPU_CFG_INTR_INTR_TRIGGER(p, 1));
 	if (!(val & mask))
-		irq_reg_writel(gc, mask, ICPU_CFG_INTR_INTR_STICKY);
+		irq_reg_writel(gc, mask, p->reg_off_sticky);
 
 	*ct->mask_cache &= ~mask;
-	irq_reg_writel(gc, mask, ICPU_CFG_INTR_INTR_ENA_SET);
+	irq_reg_writel(gc, mask, p->reg_off_ena_set);
 	irq_gc_unlock(gc);
 }
 
@@ -43,8 +64,9 @@ static void ocelot_irq_handler(struct irq_desc *desc)
 {
 	struct irq_chip *chip = irq_desc_get_chip(desc);
 	struct irq_domain *d = irq_desc_get_handler_data(desc);
+	struct chip_props *p = d->host_data;
 	struct irq_chip_generic *gc = irq_get_domain_generic_chip(d, 0);
-	u32 reg = irq_reg_readl(gc, ICPU_CFG_INTR_DST_INTR_IDENT(0));
+	u32 reg = irq_reg_readl(gc, ICPU_CFG_INTR_DST_INTR_IDENT(p, 0));
 
 	chained_irq_enter(chip, desc);
 
@@ -58,8 +80,9 @@ static void ocelot_irq_handler(struct irq_desc *desc)
 	chained_irq_exit(chip, desc);
 }
 
-static int __init ocelot_irq_init(struct device_node *node,
-				  struct device_node *parent)
+static int __init vcoreiii_irq_init(struct device_node *node,
+				    struct device_node *parent,
+				    struct chip_props *p)
 {
 	struct irq_domain *domain;
 	struct irq_chip_generic *gc;
@@ -69,14 +92,14 @@ static int __init ocelot_irq_init(struct device_node *node,
 	if (!parent_irq)
 		return -EINVAL;
 
-	domain = irq_domain_add_linear(node, OCELOT_NR_IRQ,
+	domain = irq_domain_add_linear(node, p->n_irq,
 				       &irq_generic_chip_ops, NULL);
 	if (!domain) {
 		pr_err("%pOFn: unable to add irq domain\n", node);
 		return -ENOMEM;
 	}
 
-	ret = irq_alloc_domain_generic_chips(domain, OCELOT_NR_IRQ, 1,
+	ret = irq_alloc_domain_generic_chips(domain, p->n_irq, 1,
 					     "icpu", handle_level_irq,
 					     0, 0, 0);
 	if (ret) {
@@ -92,16 +115,18 @@ static int __init ocelot_irq_init(struct device_node *node,
 		goto err_gc_free;
 	}
 
-	gc->chip_types[0].regs.ack = ICPU_CFG_INTR_INTR_STICKY;
-	gc->chip_types[0].regs.mask = ICPU_CFG_INTR_INTR_ENA_CLR;
+	gc->chip_types[0].regs.ack = p->reg_off_sticky;
+	gc->chip_types[0].regs.mask = p->reg_off_ena_clr;
 	gc->chip_types[0].chip.irq_ack = irq_gc_ack_set_bit;
 	gc->chip_types[0].chip.irq_mask = irq_gc_mask_set_bit;
-	gc->chip_types[0].chip.irq_unmask = ocelot_irq_unmask;
+	if (p->flags & FLAGS_HAS_TRIGGER)
+		gc->chip_types[0].chip.irq_unmask = ocelot_irq_unmask;
 
 	/* Mask and ack all interrupts */
-	irq_reg_writel(gc, 0, ICPU_CFG_INTR_INTR_ENA);
-	irq_reg_writel(gc, 0xffffffff, ICPU_CFG_INTR_INTR_STICKY);
+	irq_reg_writel(gc, 0, p->reg_off_ena);
+	irq_reg_writel(gc, 0xffffffff, p->reg_off_sticky);
 
+	domain->host_data = p;
 	irq_set_chained_handler_and_data(parent_irq, ocelot_irq_handler,
 					 domain);
 
@@ -115,4 +140,11 @@ static int __init ocelot_irq_init(struct device_node *node,
 
 	return ret;
 }
+
+static int __init ocelot_irq_init(struct device_node *node,
+				  struct device_node *parent)
+{
+	return vcoreiii_irq_init(node, parent, &ocelot_props);
+}
+
 IRQCHIP_DECLARE(ocelot_icpu, "mscc,ocelot-icpu-intr", ocelot_irq_init);
Signature · 1 line
2.29.2
Acked-by on v4 3/6
#5 lore raw

Re: [PATCH v4 3/6] irqchip: ocelot: prepare to support more SoC

Quoted 4 lines · Gregory CLEMENT

This patch extends irqchip driver for oceleot to be used with other vcoreiii base platforms.

Quoted 151 lines
---
 drivers/irqchip/irq-mscc-ocelot.c | 76 ++++++++++++++++++++++---------
 1 file changed, 54 insertions(+), 22 deletions(-)
drivers/irqchip/irq-mscc-ocelot.c +54 -22
index 88143c0b700c..6d4029a2ded0 100644
@@ -12,30 +12,51 @@
 #include <linux/irqchip/chained_irq.h>
 #include <linux/interrupt.h>
 
-#define ICPU_CFG_INTR_INTR_STICKY	0x10
-#define ICPU_CFG_INTR_INTR_ENA		0x18
-#define ICPU_CFG_INTR_INTR_ENA_CLR	0x1c
-#define ICPU_CFG_INTR_INTR_ENA_SET	0x20
-#define ICPU_CFG_INTR_DST_INTR_IDENT(x)	(0x38 + 0x4 * (x))
-#define ICPU_CFG_INTR_INTR_TRIGGER(x)	(0x5c + 0x4 * (x))
-
-#define OCELOT_NR_IRQ 24
+#define ICPU_CFG_INTR_DST_INTR_IDENT(_p, x) ((_p)->reg_off_ident + 0x4 * (x))
+#define ICPU_CFG_INTR_INTR_TRIGGER(_p, x)   ((_p)->reg_off_trigger + 0x4 * (x))
+
+#define FLAGS_HAS_TRIGGER	BIT(0)
+
+struct chip_props {
+	u8 flags;
+	u8 reg_off_sticky;
+	u8 reg_off_ena;
+	u8 reg_off_ena_clr;
+	u8 reg_off_ena_set;
+	u8 reg_off_ident;
+	u8 reg_off_trigger;
+	u8 reg_off_ena_irq0;
+	u8 n_irq;
+};
+
+static struct chip_props ocelot_props = {
+	.flags			= FLAGS_HAS_TRIGGER,
+	.reg_off_sticky		= 0x10,
+	.reg_off_ena		= 0x18,
+	.reg_off_ena_clr	= 0x1c,
+	.reg_off_ena_set	= 0x20,
+	.reg_off_ident		= 0x38,
+	.reg_off_trigger	= 0x5c,
+	.n_irq			= 24,
+};
 
 static void ocelot_irq_unmask(struct irq_data *data)
 {
 	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(data);
+	struct irq_domain *d = data->domain;
+	struct chip_props *p = d->host_data;
 	struct irq_chip_type *ct = irq_data_get_chip_type(data);
 	unsigned int mask = data->mask;
 	u32 val;
 
 	irq_gc_lock(gc);
-	val = irq_reg_readl(gc, ICPU_CFG_INTR_INTR_TRIGGER(0)) |
-	      irq_reg_readl(gc, ICPU_CFG_INTR_INTR_TRIGGER(1));
+	val = irq_reg_readl(gc, ICPU_CFG_INTR_INTR_TRIGGER(p, 0)) |
+		irq_reg_readl(gc, ICPU_CFG_INTR_INTR_TRIGGER(p, 1));
 	if (!(val & mask))
-		irq_reg_writel(gc, mask, ICPU_CFG_INTR_INTR_STICKY);
+		irq_reg_writel(gc, mask, p->reg_off_sticky);
 
 	*ct->mask_cache &= ~mask;
-	irq_reg_writel(gc, mask, ICPU_CFG_INTR_INTR_ENA_SET);
+	irq_reg_writel(gc, mask, p->reg_off_ena_set);
 	irq_gc_unlock(gc);
 }
 
@@ -43,8 +64,9 @@ static void ocelot_irq_handler(struct irq_desc *desc)
 {
 	struct irq_chip *chip = irq_desc_get_chip(desc);
 	struct irq_domain *d = irq_desc_get_handler_data(desc);
+	struct chip_props *p = d->host_data;
 	struct irq_chip_generic *gc = irq_get_domain_generic_chip(d, 0);
-	u32 reg = irq_reg_readl(gc, ICPU_CFG_INTR_DST_INTR_IDENT(0));
+	u32 reg = irq_reg_readl(gc, ICPU_CFG_INTR_DST_INTR_IDENT(p, 0));
 
 	chained_irq_enter(chip, desc);
 
@@ -58,8 +80,9 @@ static void ocelot_irq_handler(struct irq_desc *desc)
 	chained_irq_exit(chip, desc);
 }
 
-static int __init ocelot_irq_init(struct device_node *node,
-				  struct device_node *parent)
+static int __init vcoreiii_irq_init(struct device_node *node,
+				    struct device_node *parent,
+				    struct chip_props *p)
 {
 	struct irq_domain *domain;
 	struct irq_chip_generic *gc;
@@ -69,14 +92,14 @@ static int __init ocelot_irq_init(struct device_node *node,
 	if (!parent_irq)
 		return -EINVAL;
 
-	domain = irq_domain_add_linear(node, OCELOT_NR_IRQ,
+	domain = irq_domain_add_linear(node, p->n_irq,
 				       &irq_generic_chip_ops, NULL);
 	if (!domain) {
 		pr_err("%pOFn: unable to add irq domain\n", node);
 		return -ENOMEM;
 	}
 
-	ret = irq_alloc_domain_generic_chips(domain, OCELOT_NR_IRQ, 1,
+	ret = irq_alloc_domain_generic_chips(domain, p->n_irq, 1,
 					     "icpu", handle_level_irq,
 					     0, 0, 0);
 	if (ret) {
@@ -92,16 +115,18 @@ static int __init ocelot_irq_init(struct device_node *node,
 		goto err_gc_free;
 	}
 
-	gc->chip_types[0].regs.ack = ICPU_CFG_INTR_INTR_STICKY;
-	gc->chip_types[0].regs.mask = ICPU_CFG_INTR_INTR_ENA_CLR;
+	gc->chip_types[0].regs.ack = p->reg_off_sticky;
+	gc->chip_types[0].regs.mask = p->reg_off_ena_clr;
 	gc->chip_types[0].chip.irq_ack = irq_gc_ack_set_bit;
 	gc->chip_types[0].chip.irq_mask = irq_gc_mask_set_bit;
-	gc->chip_types[0].chip.irq_unmask = ocelot_irq_unmask;
+	if (p->flags & FLAGS_HAS_TRIGGER)
+		gc->chip_types[0].chip.irq_unmask = ocelot_irq_unmask;
 
 	/* Mask and ack all interrupts */
-	irq_reg_writel(gc, 0, ICPU_CFG_INTR_INTR_ENA);
-	irq_reg_writel(gc, 0xffffffff, ICPU_CFG_INTR_INTR_STICKY);
+	irq_reg_writel(gc, 0, p->reg_off_ena);
+	irq_reg_writel(gc, 0xffffffff, p->reg_off_sticky);
 
+	domain->host_data = p;
 	irq_set_chained_handler_and_data(parent_irq, ocelot_irq_handler,
 					 domain);
 
@@ -115,4 +140,11 @@ static int __init ocelot_irq_init(struct device_node *node,
 
 	return ret;
 }
+
+static int __init ocelot_irq_init(struct device_node *node,
+				  struct device_node *parent)
+{
+	return vcoreiii_irq_init(node, parent, &ocelot_props);
+}
+
 IRQCHIP_DECLARE(ocelot_icpu, "mscc,ocelot-icpu-intr", ocelot_irq_init);
Signature · 1 line
2.29.2
Signature · 3 lines
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
#6 lore raw

PATCH v4 4/6 irqchip: ocelot: Add support for Luton platforms

In reply to Gregory CLEMENT

This patch extends irqchip driver for oceleot to be used with an other vcoreiii base platform: Luton.

For this platform there is a few differences:
- the interrupt must be enabled for the parent controller
- there is no trigger register needed to be managed

---
 drivers/irqchip/irq-mscc-ocelot.c | 38 +++++++++++++++++++++++++++----
 1 file changed, 34 insertions(+), 4 deletions(-)
drivers/irqchip/irq-mscc-ocelot.c +34 -4
index 6d4029a2ded0..496f955b8fc4 100644
@@ -16,6 +16,7 @@
 #define ICPU_CFG_INTR_INTR_TRIGGER(_p, x)   ((_p)->reg_off_trigger + 0x4 * (x))
 
 #define FLAGS_HAS_TRIGGER	BIT(0)
+#define FLAGS_NEED_INIT_ENABLE	BIT(1)
 
 struct chip_props {
 	u8 flags;
@@ -40,6 +41,17 @@ static struct chip_props ocelot_props = {
 	.n_irq			= 24,
 };
 
+static struct chip_props luton_props = {
+	.flags			= FLAGS_NEED_INIT_ENABLE,
+	.reg_off_sticky		= 0,
+	.reg_off_ena		= 0x4,
+	.reg_off_ena_clr	= 0x8,
+	.reg_off_ena_set	= 0xc,
+	.reg_off_ident		= 0x18,
+	.reg_off_ena_irq0	= 0x14,
+	.n_irq			= 28,
+};
+
 static void ocelot_irq_unmask(struct irq_data *data)
 {
 	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(data);
@@ -115,17 +127,27 @@ static int __init vcoreiii_irq_init(struct device_node *node,
 		goto err_gc_free;
 	}
 
-	gc->chip_types[0].regs.ack = p->reg_off_sticky;
-	gc->chip_types[0].regs.mask = p->reg_off_ena_clr;
 	gc->chip_types[0].chip.irq_ack = irq_gc_ack_set_bit;
-	gc->chip_types[0].chip.irq_mask = irq_gc_mask_set_bit;
-	if (p->flags & FLAGS_HAS_TRIGGER)
+	gc->chip_types[0].regs.ack = p->reg_off_sticky;
+	if (p->flags & FLAGS_HAS_TRIGGER) {
+		gc->chip_types[0].regs.mask = p->reg_off_ena_clr;
 		gc->chip_types[0].chip.irq_unmask = ocelot_irq_unmask;
+		gc->chip_types[0].chip.irq_mask = irq_gc_mask_set_bit;
+	} else {
+		gc->chip_types[0].regs.enable = p->reg_off_ena_set;
+		gc->chip_types[0].regs.disable = p->reg_off_ena_clr;
+		gc->chip_types[0].chip.irq_mask = irq_gc_mask_disable_reg;
+		gc->chip_types[0].chip.irq_unmask = irq_gc_unmask_enable_reg;
+	}
 
 	/* Mask and ack all interrupts */
 	irq_reg_writel(gc, 0, p->reg_off_ena);
 	irq_reg_writel(gc, 0xffffffff, p->reg_off_sticky);
 
+	/* Overall init */
+	if (p->flags & FLAGS_NEED_INIT_ENABLE)
+		irq_reg_writel(gc, BIT(0), p->reg_off_ena_irq0);
+
 	domain->host_data = p;
 	irq_set_chained_handler_and_data(parent_irq, ocelot_irq_handler,
 					 domain);
@@ -148,3 +170,11 @@ static int __init ocelot_irq_init(struct device_node *node,
 }
 
 IRQCHIP_DECLARE(ocelot_icpu, "mscc,ocelot-icpu-intr", ocelot_irq_init);
+
+static int __init luton_irq_init(struct device_node *node,
+				 struct device_node *parent)
+{
+	return vcoreiii_irq_init(node, parent, &luton_props);
+}
+
+IRQCHIP_DECLARE(luton_icpu, "mscc,luton-icpu-intr", luton_irq_init);
Signature · 1 line
2.29.2
Acked-by on v4 4/6
#7 lore raw

Re: [PATCH v4 4/6] irqchip: ocelot: Add support for Luton platforms

Quoted 8 lines · Gregory CLEMENT

This patch extends irqchip driver for oceleot to be used with an other vcoreiii base platform: Luton.

For this platform there is a few differences:
- the interrupt must be enabled for the parent controller
- there is no trigger register needed to be managed

Quoted 81 lines
---
 drivers/irqchip/irq-mscc-ocelot.c | 38 +++++++++++++++++++++++++++----
 1 file changed, 34 insertions(+), 4 deletions(-)
drivers/irqchip/irq-mscc-ocelot.c +34 -4
index 6d4029a2ded0..496f955b8fc4 100644
@@ -16,6 +16,7 @@
 #define ICPU_CFG_INTR_INTR_TRIGGER(_p, x)   ((_p)->reg_off_trigger + 0x4 * (x))
 
 #define FLAGS_HAS_TRIGGER	BIT(0)
+#define FLAGS_NEED_INIT_ENABLE	BIT(1)
 
 struct chip_props {
 	u8 flags;
@@ -40,6 +41,17 @@ static struct chip_props ocelot_props = {
 	.n_irq			= 24,
 };
 
+static struct chip_props luton_props = {
+	.flags			= FLAGS_NEED_INIT_ENABLE,
+	.reg_off_sticky		= 0,
+	.reg_off_ena		= 0x4,
+	.reg_off_ena_clr	= 0x8,
+	.reg_off_ena_set	= 0xc,
+	.reg_off_ident		= 0x18,
+	.reg_off_ena_irq0	= 0x14,
+	.n_irq			= 28,
+};
+
 static void ocelot_irq_unmask(struct irq_data *data)
 {
 	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(data);
@@ -115,17 +127,27 @@ static int __init vcoreiii_irq_init(struct device_node *node,
 		goto err_gc_free;
 	}
 
-	gc->chip_types[0].regs.ack = p->reg_off_sticky;
-	gc->chip_types[0].regs.mask = p->reg_off_ena_clr;
 	gc->chip_types[0].chip.irq_ack = irq_gc_ack_set_bit;
-	gc->chip_types[0].chip.irq_mask = irq_gc_mask_set_bit;
-	if (p->flags & FLAGS_HAS_TRIGGER)
+	gc->chip_types[0].regs.ack = p->reg_off_sticky;
+	if (p->flags & FLAGS_HAS_TRIGGER) {
+		gc->chip_types[0].regs.mask = p->reg_off_ena_clr;
 		gc->chip_types[0].chip.irq_unmask = ocelot_irq_unmask;
+		gc->chip_types[0].chip.irq_mask = irq_gc_mask_set_bit;
+	} else {
+		gc->chip_types[0].regs.enable = p->reg_off_ena_set;
+		gc->chip_types[0].regs.disable = p->reg_off_ena_clr;
+		gc->chip_types[0].chip.irq_mask = irq_gc_mask_disable_reg;
+		gc->chip_types[0].chip.irq_unmask = irq_gc_unmask_enable_reg;
+	}
 
 	/* Mask and ack all interrupts */
 	irq_reg_writel(gc, 0, p->reg_off_ena);
 	irq_reg_writel(gc, 0xffffffff, p->reg_off_sticky);
 
+	/* Overall init */
+	if (p->flags & FLAGS_NEED_INIT_ENABLE)
+		irq_reg_writel(gc, BIT(0), p->reg_off_ena_irq0);
+
 	domain->host_data = p;
 	irq_set_chained_handler_and_data(parent_irq, ocelot_irq_handler,
 					 domain);
@@ -148,3 +170,11 @@ static int __init ocelot_irq_init(struct device_node *node,
 }
 
 IRQCHIP_DECLARE(ocelot_icpu, "mscc,ocelot-icpu-intr", ocelot_irq_init);
+
+static int __init luton_irq_init(struct device_node *node,
+				 struct device_node *parent)
+{
+	return vcoreiii_irq_init(node, parent, &luton_props);
+}
+
+IRQCHIP_DECLARE(luton_icpu, "mscc,luton-icpu-intr", luton_irq_init);
Signature · 1 line
2.29.2
Signature · 3 lines
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
#8 lore raw

PATCH v4 5/6 irqchip: ocelot: Add support for Serval platforms

In reply to Gregory CLEMENT

This patch extends irqchip driver for ocelot to be used with an other vcoreiii base platform: Serval.

Based on a larger patch from Lars Povlsen <[email protected]>

---
 drivers/irqchip/irq-mscc-ocelot.c | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)
drivers/irqchip/irq-mscc-ocelot.c +19 -0
index 496f955b8fc4..da5a0ad991a1 100644
@@ -41,6 +41,17 @@ static struct chip_props ocelot_props = {
 	.n_irq			= 24,
 };
 
+static struct chip_props serval_props = {
+	.flags			= FLAGS_HAS_TRIGGER,
+	.reg_off_sticky		= 0xc,
+	.reg_off_ena		= 0x14,
+	.reg_off_ena_clr	= 0x18,
+	.reg_off_ena_set	= 0x1c,
+	.reg_off_ident		= 0x20,
+	.reg_off_trigger	= 0x4,
+	.n_irq			= 24,
+};
+
 static struct chip_props luton_props = {
 	.flags			= FLAGS_NEED_INIT_ENABLE,
 	.reg_off_sticky		= 0,
@@ -171,6 +182,14 @@ static int __init ocelot_irq_init(struct device_node *node,
 
 IRQCHIP_DECLARE(ocelot_icpu, "mscc,ocelot-icpu-intr", ocelot_irq_init);
 
+static int __init serval_irq_init(struct device_node *node,
+				  struct device_node *parent)
+{
+	return vcoreiii_irq_init(node, parent, &serval_props);
+}
+
+IRQCHIP_DECLARE(serval_icpu, "mscc,serval-icpu-intr", serval_irq_init);
+
 static int __init luton_irq_init(struct device_node *node,
 				 struct device_node *parent)
 {
Signature · 1 line
2.29.2
#9 lore raw

PATCH v4 6/6 irqchip: ocelot: Add support for Jaguar2 platforms

In reply to Gregory CLEMENT

This patch extends irqchip driver for ocelot to be used with an other vcoreiii base platform: Jaguar2.

Based on a larger patch from Lars Povlsen <[email protected]>

---
 drivers/irqchip/irq-mscc-ocelot.c | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)
drivers/irqchip/irq-mscc-ocelot.c +19 -0
index da5a0ad991a1..8235d98650c1 100644
@@ -63,6 +63,17 @@ static struct chip_props luton_props = {
 	.n_irq			= 28,
 };
 
+static struct chip_props jaguar2_props = {
+	.flags			= FLAGS_HAS_TRIGGER,
+	.reg_off_sticky		= 0x10,
+	.reg_off_ena		= 0x18,
+	.reg_off_ena_clr	= 0x1c,
+	.reg_off_ena_set	= 0x20,
+	.reg_off_ident		= 0x38,
+	.reg_off_trigger	= 0x5c,
+	.n_irq			= 29,
+};
+
 static void ocelot_irq_unmask(struct irq_data *data)
 {
 	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(data);
@@ -197,3 +208,11 @@ static int __init luton_irq_init(struct device_node *node,
 }
 
 IRQCHIP_DECLARE(luton_icpu, "mscc,luton-icpu-intr", luton_irq_init);
+
+static int __init jaguar2_irq_init(struct device_node *node,
+				   struct device_node *parent)
+{
+	return vcoreiii_irq_init(node, parent, &jaguar2_props);
+}
+
+IRQCHIP_DECLARE(jaguar2_icpu, "mscc,jaguar2-icpu-intr", jaguar2_irq_init);
Signature · 1 line
2.29.2