panel-simple: add Innolux N125HCE-GN1
Subsystems (4)
PATCH 1/2 panel-simple: add Innolux N125HCE-GN1
The Innolux N125HCE-GN1 display is used in the MNT Reform 2.0 laptop, attached via eDP to a SN65DSI86 MIPI-DSI to eDP bridge.
--- drivers/gpu/drm/panel/panel-simple.c | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+)
drivers/gpu/drm/panel/panel-simple.c +28 -0
@@ -2263,6 +2263,31 @@ static const struct panel_desc innolux_n116bge = { }, }; +static const struct drm_display_mode innolux_n125hce_gn1_mode = { + .clock =162000 , + .hdisplay =1920 , + .hsync_start =1920 +40 , + .hsync_end =1920 +40 +40 , + .htotal =1920 +40 +40 +80 , + .vdisplay =1080 , + .vsync_start =1080 +4 , + .vsync_end =1080 +4 +4 , + .vtotal =1080 +4 +4 +24 , +}; + +static const struct panel_desc innolux_n125hce_gn1 = { + .modes = &innolux_n125hce_gn1_mode, + .num_modes =1 , + .bpc =8 , + .size = { + .width =276 , + .height =155 , + }, + .bus_format =MEDIA_BUS_FMT_RGB888_1X24 , + .bus_flags =DRM_BUS_FLAG_DATA_MSB_TO_LSB , + .connector_type = DRM_MODE_CONNECTOR_eDP, +}; +static const struct drm_display_mode innolux_n156bge_l21_mode = { .clock =69300 , .hdisplay =1366 ,
@@ -4092,6 +4117,9 @@ static const struct of_device_id platform_of_match[] = { }, { .compatible = "innolux,n116bge", .data = &innolux_n116bge, + }, { + .compatible = "innolux,n125hce-gn1", + .data = &innolux_n125hce_gn1, }, { .compatible = "innolux,n156bge-l21", .data = &innolux_n156bge_l21,
Signature · 1 line
2.28.0
PATCH 2/2 dt-bindings: display/panel: add Innolux N125HCE-GN1
The Innolux N125HCE-GN1 display is used in the MNT Reform 2.0 laptop, attached via eDP to a SN65DSI86 MIPI-DSI to eDP bridge. This patch contains the DT binding for "innolux,n125hce-gn1".
--- .../devicetree/bindings/display/panel/panel-simple.yaml | 2 ++ 1 file changed, 2 insertions(+)
Documentation/devicetree/bindings/display/panel/panel-simple.yaml +2 -0
@@ -160,6 +160,8 @@ properties: # Innolux Corporation 11.6" WXGA (1366x768) TFT LCD panel - innolux,n116bge # InnoLux 15.6" WXGA TFT LCD panel + - innolux,n125hce-gn1 + # InnoLux 13.3" FHD (1920x1080) eDP TFT LCD panel - innolux,n156bge-l21 # Innolux Corporation 7.0" WSVGA (1024x600) TFT LCD panel - innolux,zj070na-01p
Signature · 1 line
2.28.0
Sam Ravnborg
AppliedRe: [PATCH 2/2] dt-bindings: display/panel: add Innolux N125HCE-GN1
Hi Lukas
Quoted 5 lines · Lukas F. Hartmann
The Innolux N125HCE-GN1 display is used in the MNT Reform 2.0 laptop, attached via eDP to a SN65DSI86 MIPI-DSI to eDP bridge. This patch contains the DT binding for "innolux,n125hce-gn1".
Signed-off-by Lukas F. Hartmann <[email protected]>
bindings before their usage, so this should be first patch.
Quoted 9 lines
--- .../devicetree/bindings/display/panel/panel-simple.yaml | 2 ++ 1 file changed, 2 insertions(+)Documentation/devicetree/bindings/display/panel/panel-simple.yaml +0
-0
Documentation/devicetree/bindings/display/panel/panel-simple.yaml properties: · line 164
Quoted 5 lines
Documentation/devicetree/bindings/display/panel/panel-simple.yaml +2
-0@@ -160,6 +160,8 @@ properties: # Innolux Corporation 11.6" WXGA (1366x768) TFT LCD panel - innolux,n116bge # InnoLux 15.6" WXGA TFT LCD panel + - innolux,n125hce-gn1 + # InnoLux 13.3" FHD (1920x1080) eDP TFT LCD panel
Comments before the compatible.
I applied this first and reordered the comment - so both details are handled.
Applied to drm-misc-next.
Sam
Hi Lukas.
Quoted 4 lines · Lukas F. Hartmann
The Innolux N125HCE-GN1 display is used in the MNT Reform 2.0 laptop, attached via eDP to a SN65DSI86 MIPI-DSI to eDP bridge.
Signed-off-by Lukas F. Hartmann <[email protected]>
Danke, applied to drm-misc-next.
Sam
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel