Skip to contentSkip to conversation

arm64: dts: ti: k3: squelch warning about lack of #interrupt-cells

PATCH Applied Sekhar Nori 2 participants 2 messages Nov 27, 2020 – Nov 28, 2020

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 arm64: dts: ti: k3: squelch warning about lack of #interrupt-cells

There are couple of places where INTA interrupt controller lacks #interrupt-cells property. This leads to warnings of the type:

arch/arm64/boot/dts/ti/k3-j721e-main.dtsi:147.51-156.5: Warning (interrupt_provider): /bus@100000/main-navss/interrupt-controller@33d00000: Missing #interrupt-cells in interrupt provider

when building TI device-tree files with W=2 warning level. Fix these.

---
v2:
- Add Grygorii's Reviewed-by:

 arch/arm64/boot/dts/ti/k3-am65-main.dtsi  | 1 +
 arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 1 +
 2 files changed, 2 insertions(+)
arch/arm64/boot/dts/ti/k3-am65-main.dtsi +1 -0
index 3eeb6e9876db..aa8725db0187 100644
@@ -473,6 +473,7 @@
 			interrupt-controller;
 			interrupt-parent = <&intr_main_navss>;
 			msi-controller;
+			#interrupt-cells = <0>;
 			ti,sci = <&dmsc>;
 			ti,sci-dev-id = <179>;
 			ti,interrupt-ranges = <0 0 256>;
arch/arm64/boot/dts/ti/k3-j721e-main.dtsi +1 -0
index e2a96b2c423c..ffedd9531362 100644
@@ -148,6 +148,7 @@
 			interrupt-controller;
 			interrupt-parent = <&main_navss_intr>;
 			msi-controller;
+			#interrupt-cells = <0>;
 			ti,sci = <&dmsc>;
 			ti,sci-dev-id = <209>;
 			ti,interrupt-ranges = <0 0 256>;
Signature · 7 lines
2.17.1


_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
maintainer Applied
#1 lore raw
Quoted 8 lines · Sekhar Nori

There are couple of places where INTA interrupt controller lacks #interrupt-cells property. This leads to warnings of the type:

arch/arm64/boot/dts/ti/k3-j721e-main.dtsi:147.51-156.5: Warning (interrupt_provider): /bus@100000/main-navss/interrupt-controller@33d00000: Missing #interrupt-cells in interrupt provider

when building TI device-tree files with W=2 warning level. Fix these.

Hi Sekhar Nori,

I have applied the following to branch ti-k3-next on [1]. Thank you!

[1/1] arm64: dts: ti: k3: squelch warning about lack of #interrupt-cells

      commit: 15ffd94a904bafcce6dd4babf8f26bd8fe965bff

All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent up the chain during the next merge window (or sooner if it is a relevant bug fix), however if problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

[1] git://git.kernel.org/pub/scm/linux/kernel/git/nmenon/linux.git

Signature · 9 lines
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3  1A34 DDB5 849D 1736 249D


_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel