Skip to contentSkip to conversation

hts221: add vdd power regulator

PATCH In review Lorenzo Bianconi 2 participants 4 messages Nov 22, 2020 – Nov 28, 2020

Subsystems (3)
Device tree bindings IIO HTS221 temperature-humidity IIO driver
lore
Share & tools
lore

Lorenzo Bianconi

author maintainer
#0 lore raw

v2 cover hts221: add vdd power regulator

Introduce support to control VDD power line available on hts221 devices

Changes since v1:
- update vdd-supply binding
- rely on dev_err_probe() in hts221_init_regulators() to avoid printing error message is the deferred case

Lorenzo Bianconi (2):
iio: humidity: hts221: add vdd voltage regulator
dt-bindings: iio: humidity: hts221: introduce vdd regulator bindings

 .../bindings/iio/humidity/st,hts221.yaml      |  2 +
 drivers/iio/humidity/hts221.h                 |  2 +
 drivers/iio/humidity/hts221_core.c            | 37 +++++++++++++++++++
 3 files changed, 41 insertions(+)
Signature · 1 line
2.28.0
author maintainer
#1 lore raw

PATCH v2 1/2 iio: humidity: hts221: add vdd voltage regulator

Like all other ST sensors, hts221 devices have VDD power line. Introduce VDD voltage regulator to control it.

Signed-off-by Lorenzo Bianconi <[email protected]>
---
 drivers/iio/humidity/hts221.h      |  2 ++
 drivers/iio/humidity/hts221_core.c | 37 ++++++++++++++++++++++++++++++
 2 files changed, 39 insertions(+)
drivers/iio/humidity/hts221.h +2 -0
index 721359e226cb..cf3d8d2dccd6 100644
@@ -13,6 +13,7 @@
 #define HTS221_DEV_NAME		"hts221"
 
 #include <linux/iio/iio.h>
+#include <linux/regulator/consumer.h>
 
 enum hts221_sensor_type {
 	HTS221_SENSOR_H,

@@ -29,6 +30,7 @@ struct hts221_hw {
 	const char *name;
 	struct device *dev;
 	struct regmap *regmap;
+	struct regulator *vdd;
 
 	struct iio_trigger *trig;
 	int irq;
drivers/iio/humidity/hts221_core.c +37 -0
index 16657789dc45..6a39615b6961 100644
@@ -547,6 +547,35 @@ static const struct iio_info hts221_info = {
 
 static const unsigned long hts221_scan_masks[] = {0x3, 0x0};
 
+static int hts221_init_regulators(struct device *dev)
+{
+	struct iio_dev *iio_dev = dev_get_drvdata(dev);
+	struct hts221_hw *hw = iio_priv(iio_dev);
+	int err;
+
+	hw->vdd = devm_regulator_get(dev, "vdd");
+	if (IS_ERR(hw->vdd))
+		return dev_err_probe(dev, PTR_ERR(hw->vdd),
+				     "failed to get vdd regulator\n");
+
+	err = regulator_enable(hw->vdd);
+	if (err) {
+		dev_err(dev, "failed to enable vdd regulator: %d\n", err);
+		return err;
+	}
+
+	msleep(50);
+
+	return 0;
+}
+
+static void hts221_chip_uninit(void *data)
+{
+	struct hts221_hw *hw = data;
+
+	regulator_disable(hw->vdd);
+}
+
 int hts221_probe(struct device *dev, int irq, const char *name,
 		 struct regmap *regmap)
 {

@@ -567,6 +596,14 @@ int hts221_probe(struct device *dev, int irq, const char *name,
 	hw->irq = irq;
 	hw->regmap = regmap;
 
+	err = hts221_init_regulators(dev);
+	if (err)
+		return err;
+
+	err = devm_add_action_or_reset(dev, hts221_chip_uninit, hw);
+	if (err)
+		return err;
+
 	err = hts221_check_whoami(hw);
 	if (err < 0)
 		return err;
Signature · 1 line
2.28.0
author maintainer
#2 lore raw

PATCH v2 2/2 dt-bindings: iio: humidity: hts221: introduce vdd regulator bindings

In reply to Lorenzo Bianconi
Signed-off-by Lorenzo Bianconi <[email protected]>
---
 Documentation/devicetree/bindings/iio/humidity/st,hts221.yaml | 2 ++
 1 file changed, 2 insertions(+)
Documentation/devicetree/bindings/iio/humidity/st,hts221.yaml +2 -0
index 396451c26728..598473df74fa 100644
@@ -26,6 +26,8 @@ properties:
       The interrupt/data ready line will be configured as open drain, which
       is useful if several sensors share the same interrupt line.
 
+  vdd-supply: true
+
   interrupts:
     maxItems: 1
Signature · 1 line
2.28.0
maintainer
#3 lore raw
In reply to Lorenzo Bianconi
Quoted 7 lines · On Sun, 22 Nov 2020 12:56:47 +0100 Lorenzo Bianconi <[email protected]> wrote:

Introduce support to control VDD power line available on hts221 devices

Changes since v1:
- update vdd-supply binding
- rely on dev_err_probe() in hts221_init_regulators() to avoid printing error message is the deferred case

Quoted 9 lines

Lorenzo Bianconi (2):
iio: humidity: hts221: add vdd voltage regulator
dt-bindings: iio: humidity: hts221: introduce vdd regulator bindings

 .../bindings/iio/humidity/st,hts221.yaml      |  2 +
 drivers/iio/humidity/hts221.h                 |  2 +
 drivers/iio/humidity/hts221_core.c            | 37 +++++++++++++++++++
 3 files changed, 41 insertions(+)

Applied to the togreg branch of iio.git and pushed out as testing.

thanks,

Jonathan