remoteproc/mediatek: read IPI buffer offset from FW
Subsystems (2)
PATCH v3 1/1 remoteproc/mediatek: read IPI buffer offset from FW
Reads the IPI buffer offset from the FW binary. The information resides in addr of .ipi_buffer section.
Moves scp_ipi_init() to scp_load() phase. The IPI buffer can be initialized only if the offset is clear.
To backward compatible to MT8183 SCP, specify the offset in the board specific mtk_scp_of_data. Reads the default offset if the firmware doesn't have it.
---
Previous discussion:
https://patchwork.kernel.org/project/linux-remoteproc/patch/[email protected]/
Changes from v2:
- to backward-compatible, reads the default offset if the firmware doesn't have it
drivers/remoteproc/mtk_common.h | 2 + drivers/remoteproc/mtk_scp.c | 79 +++++++++++++++++++++++---------- 2 files changed, 57 insertions(+), 24 deletions(-)
drivers/remoteproc/mtk_common.h +2 -0
@@ -78,6 +78,8 @@ struct mtk_scp_of_data {u32 host_to_scp_reg;u32 host_to_scp_int_bit; + +size_t ipi_buf_offset; };struct mtk_scp {
drivers/remoteproc/mtk_scp.c +55 -24
120 lines not on this page · raw message
Signature · 7 lines
2.29.2.454.gaff20da3a2-goog _______________________________________________ Linux-mediatek mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-mediatek
Mathieu Poirier
maintainerQuoted 123 lines · Tzung-Bi Shih
Reads the IPI buffer offset from the FW binary. The information resides in addr of .ipi_buffer section.
Moves
scp_ipi_init()toscp_load()phase. The IPI buffer can be initialized only if the offset is clear.To backward compatible to MT8183 SCP, specify the offset in the board specific
mtk_scp_of_data. Reads the default offset if the firmware doesn't have it.Signed-off-by Tzung-Bi Shih <[email protected]>---
Previous discussion:
https://patchwork.kernel.org/project/linux-remoteproc/patch/[email protected]/Changes from v2:
- to backward-compatible, reads the default offset if the firmware doesn't have itdrivers/remoteproc/mtk_common.h | 2 + drivers/remoteproc/mtk_scp.c | 79 +++++++++++++++++++++++---------- 2 files changed, 57 insertions(+), 24 deletions(-)drivers/remoteproc/mtk_common.h +2
-0@@ -78,6 +78,8 @@ struct mtk_scp_of_data {u32 host_to_scp_reg;u32 host_to_scp_int_bit; + +size_t ipi_buf_offset; };struct mtk_scp {drivers/remoteproc/mtk_scp.c +48
-9@@ -21,7 +21,7 @@#include "remoteproc_internal.h" #define MAX_CODE_SIZE 0x500000 -#define SCP_FW_END 0x7C000 +#define SECTION_NAME_IPI_BUFFER ".ipi_buffer"/** * scp_get() - get a reference to SCP. @@ -119,16 +119,29 @@ static void scp_ipi_handler(struct mtk_scp *scp)wake_up (&scp->ack_wq); } -static int scp_ipi_init (struct mtk_scp *scp) +static int scp_elf_read_ipi_buf_addr (struct mtk_scp *scp, +const struct firmware *fw, +size_t *offset); + +static int scp_ipi_init (struct mtk_scp *scp,const struct firmware *fw) { -size_t send_offset =SCP_FW_END -sizeof (struct mtk_share_obj ); -size_t recv_offset = send_offset -sizeof (struct mtk_share_obj ); +int ret; +size_t offset; + +/* read the ipi buf addr from FW itself first */ + ret =scp_elf_read_ipi_buf_addr (scp, fw, &offset); +if (ret) { +/* use default ipi buf addr if the FW doesn't have it */ + offset = scp->data->ipi_buf_offset; +if (!offset) +return ret; + } +dev_info (scp->dev,"IPI buf addr %#010zx\n" , offset); -/* shared buffer initialization */ - scp->recv_buf = - (struct mtk_share_obj __iomem *)(scp->sram_base + recv_offset); - scp->send_buf = - (struct mtk_share_obj __iomem *)(scp->sram_base + send_offset); + scp->recv_buf = (struct mtk_share_obj __iomem *) + (scp->sram_base + offset); + scp->send_buf = (struct mtk_share_obj __iomem *) + (scp->sram_base + offset +sizeof (*scp->recv_buf));memset_io (scp->recv_buf,0 ,sizeof (*scp->recv_buf));memset_io (scp->send_buf,0 ,sizeof (*scp->send_buf));@@ -271,6 +284,32 @@ static int scp_elf_load_segments(struct rproc *rproc, const struct firmware *fw)return ret; } +static int scp_elf_read_ipi_buf_addr (struct mtk_scp *scp, +const struct firmware *fw, +size_t *offset) +{ +struct elf32_hdr *ehdr; +struct elf32_shdr *shdr, *shdr_strtab; +int i; +const u8 *elf_data = fw->data; +const char *strtab; + + ehdr = (struct elf32_hdr *)elf_data; + shdr = (struct elf32_shdr *)(elf_data + ehdr->e_shoff); + shdr_strtab = shdr + ehdr->e_shstrndx; + strtab = (const char *)(elf_data + shdr_strtab->sh_offset); + +for (i =0 ; i < ehdr->e_shnum; i++, shdr++) { +if (strcmp (strtab + shdr->sh_name, +SECTION_NAME_IPI_BUFFER ) ==0 ) { + *offset = shdr->sh_addr; +return 0 ; + } + } + +return -ENOENT ; +} +static int mt8183_scp_before_load (struct mtk_scp *scp) {/* Clear SCP to host interrupt */ @@ -350,11 +389,15 @@ static int scp_load(struct rproc *rproc, const struct firmware *fw) ret = scp->data->scp_before_load (scp);
drivers/remoteproc/mtk_scp.c static int scp_load(struct rproc *rproc, const struct firmware *fw) · line 398
Quoted 10 lines
drivers/remoteproc/mtk_scp.c +4
-2if (ret <0 ) -return ret; + goto leave; ret =scp_elf_load_segments (rproc, fw); -clk_disable_unprepare (scp->clk); +if (ret) + goto leave; + ret =scp_ipi_init (scp, fw);
This version is much better. Since this is effectively what is going on, please put this (along with clock related requirements) in rproc_ops::parse_fw.
Thanks,
Mathieu
Quoted 36 lines
drivers/remoteproc/mtk_scp.c +3
-13+leave: +clk_disable_unprepare (scp->clk);return ret; }@@ -680,19 +723,6 @@ static int scp_probe(struct platform_device *pdev) goto release_dev_mem; } - ret =clk_prepare_enable (scp->clk); -if (ret) { -dev_err (dev,"failed to enable clocks\n" ); - goto release_dev_mem; - } - - ret =scp_ipi_init (scp); -clk_disable_unprepare (scp->clk); -if (ret) { -dev_err (dev,"Failed to init ipi\n" ); - goto release_dev_mem; - } -/* register SCP initialization IPI */ ret =scp_ipi_register (scp,SCP_IPI_INIT , scp_init_ipi_handler, scp);if (ret) {@@ -760,6 +790,7 @@ static const struct mtk_scp_of_data mt8183_of_data = { .scp_stop = mt8183_scp_stop, .host_to_scp_reg = MT8183_HOST_TO_SCP, .host_to_scp_int_bit = MT8183_HOST_IPC_INT_BIT, + .ipi_buf_offset = 0x7bdb0, };static const struct mtk_scp_of_data mt8192_of_data = {Signature · 1 line
2.29.2.454.gaff20da3a2-goog
_______________________________________________
Linux-mediatek mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-mediatek